[PATCH v2 0/4] dma: sf-pdma: various sf-pdma updates for the mpfs platform

[PATCH v2 0/4] dma: sf-pdma: various sf-pdma updates for the mpfs platform

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Changes from V1 -> V2:

Removed internal review tags
Commit massages modified.
Added devicetree patch with new compatible name for mpfs platform
Added of_dma_controller_free() clenup call in sf_pdma_remove() function


V1:

This series does the following
1. Adds a PolarFire SoC specific compatible and code to support for
out-of-order dma transfers 

2. Adds generic device tree bindings support by using 
of_dma_controller_register()

Shravan Chippa (4):
  dmaengine: sf-pdma: Support of_dma_controller_register()
  dt-bindings: dma: sf-pdma: add new compatible name
  dmaengine: sf-pdma: add mpfs-pdma compatible name
  riscv: dts: microchip: add specific compatible for mpfs' pdma

 .../bindings/dma/sifive,fu540-c000-pdma.yaml  | 12 ++--
 arch/riscv/boot/dts/microchip/mpfs.dtsi       |  2 +-
 drivers/dma/sf-pdma/sf-pdma.c                 | 71 ++++++++++++++++++-
 drivers/dma/sf-pdma/sf-pdma.h                 |  6 ++
 4 files changed, 83 insertions(+), 8 deletions(-)

-- 
2.34.1

[PATCH v2 0/4] dma: sf-pdma: various sf-pdma updates for the mpfs platform

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Changes from V1 -> V2:

Removed internal review tags
Commit massages modified.
Added devicetree patch with new compatible name for mpfs platform
Added of_dma_controller_free() clenup call in sf_pdma_remove() function


V1:

This series does the following
1. Adds a PolarFire SoC specific compatible and code to support for
out-of-order dma transfers 

2. Adds generic device tree bindings support by using 
of_dma_controller_register()

Shravan Chippa (4):
  dmaengine: sf-pdma: Support of_dma_controller_register()
  dt-bindings: dma: sf-pdma: add new compatible name
  dmaengine: sf-pdma: add mpfs-pdma compatible name
  riscv: dts: microchip: add specific compatible for mpfs' pdma

 .../bindings/dma/sifive,fu540-c000-pdma.yaml  | 12 ++--
 arch/riscv/boot/dts/microchip/mpfs.dtsi       |  2 +-
 drivers/dma/sf-pdma/sf-pdma.c                 | 71 ++++++++++++++++++-
 drivers/dma/sf-pdma/sf-pdma.h                 |  6 ++
 4 files changed, 83 insertions(+), 8 deletions(-)

-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v2 1/4] dmaengine: sf-pdma: Support of_dma_controller_register()

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Update sf-pdma driver to adopt generic DMA device tree bindings.
It calls of_dma_controller_register() with sf-pdma specific
of_dma_xlate to get the generic DMA device tree helper support
and the DMA clients can look up the sf-pdma controller using
standard APIs.

Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 drivers/dma/sf-pdma/sf-pdma.c | 44 +++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
index d1c6956af452..06a0912a12a1 100644
--- a/drivers/dma/sf-pdma/sf-pdma.c
+++ b/drivers/dma/sf-pdma/sf-pdma.c
@@ -20,6 +20,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/of_dma.h>
 #include <linux/slab.h>
 
 #include "sf-pdma.h"
@@ -490,6 +491,33 @@ static void sf_pdma_setup_chans(struct sf_pdma *pdma)
 	}
 }
 
+static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	struct sf_pdma *pdma = ofdma->of_dma_data;
+	struct device *dev = pdma->dma_dev.dev;
+	struct sf_pdma_chan  *chan;
+	struct dma_chan *c;
+	u32 channel_id;
+
+	if (dma_spec->args_count != 1) {
+		dev_err(dev, "Bad number of cells\n");
+		return NULL;
+	}
+
+	channel_id = dma_spec->args[0];
+
+	chan = &pdma->chans[channel_id];
+
+	c = dma_get_slave_channel(&chan->vchan.chan);
+	if (!c) {
+		dev_err(dev, "No more channels available\n");
+		return NULL;
+	}
+
+	return c;
+}
+
 static int sf_pdma_probe(struct platform_device *pdev)
 {
 	struct sf_pdma *pdma;
@@ -563,7 +591,20 @@ static int sf_pdma_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = of_dma_controller_register(pdev->dev.of_node,
+					 sf_pdma_of_xlate, pdma);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Can't register SiFive Platform OF_DMA. (%d)\n", ret);
+		goto err_unregister;
+	}
+
 	return 0;
+
+err_unregister:
+	dma_async_device_unregister(&pdma->dma_dev);
+
+	return ret;
 }
 
 static int sf_pdma_remove(struct platform_device *pdev)
@@ -583,6 +624,9 @@ static int sf_pdma_remove(struct platform_device *pdev)
 		tasklet_kill(&ch->err_tasklet);
 	}
 
+	if (pdev->dev.of_node)
+		of_dma_controller_free(pdev->dev.of_node);
+
 	dma_async_device_unregister(&pdma->dma_dev);
 
 	return 0;
-- 
2.34.1

[PATCH v2 1/4] dmaengine: sf-pdma: Support of_dma_controller_register()

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Update sf-pdma driver to adopt generic DMA device tree bindings.
It calls of_dma_controller_register() with sf-pdma specific
of_dma_xlate to get the generic DMA device tree helper support
and the DMA clients can look up the sf-pdma controller using
standard APIs.

Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 drivers/dma/sf-pdma/sf-pdma.c | 44 +++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
index d1c6956af452..06a0912a12a1 100644
--- a/drivers/dma/sf-pdma/sf-pdma.c
+++ b/drivers/dma/sf-pdma/sf-pdma.c
@@ -20,6 +20,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/of_dma.h>
 #include <linux/slab.h>
 
 #include "sf-pdma.h"
@@ -490,6 +491,33 @@ static void sf_pdma_setup_chans(struct sf_pdma *pdma)
 	}
 }
 
+static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	struct sf_pdma *pdma = ofdma->of_dma_data;
+	struct device *dev = pdma->dma_dev.dev;
+	struct sf_pdma_chan  *chan;
+	struct dma_chan *c;
+	u32 channel_id;
+
+	if (dma_spec->args_count != 1) {
+		dev_err(dev, "Bad number of cells\n");
+		return NULL;
+	}
+
+	channel_id = dma_spec->args[0];
+
+	chan = &pdma->chans[channel_id];
+
+	c = dma_get_slave_channel(&chan->vchan.chan);
+	if (!c) {
+		dev_err(dev, "No more channels available\n");
+		return NULL;
+	}
+
+	return c;
+}
+
 static int sf_pdma_probe(struct platform_device *pdev)
 {
 	struct sf_pdma *pdma;
@@ -563,7 +591,20 @@ static int sf_pdma_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = of_dma_controller_register(pdev->dev.of_node,
+					 sf_pdma_of_xlate, pdma);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Can't register SiFive Platform OF_DMA. (%d)\n", ret);
+		goto err_unregister;
+	}
+
 	return 0;
+
+err_unregister:
+	dma_async_device_unregister(&pdma->dma_dev);
+
+	return ret;
 }
 
 static int sf_pdma_remove(struct platform_device *pdev)
@@ -583,6 +624,9 @@ static int sf_pdma_remove(struct platform_device *pdev)
 		tasklet_kill(&ch->err_tasklet);
 	}
 
+	if (pdev->dev.of_node)
+		of_dma_controller_free(pdev->dev.of_node);
+
 	dma_async_device_unregister(&pdma->dma_dev);
 
 	return 0;
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Add new compatible name microchip,mpfs-pdma to support
out of order dma transfers

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index a1af0b906365..974467c4bacb 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -27,10 +27,14 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,fu540-c000-pdma
-      - const: sifive,pdma0
+    oneOf:
+      - items:
+          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
+          - const: sifive,fu540-c000-pdma # Sifive in-order DMA transfer
+      - items:
+          - enum:
+              - sifive,fu540-c000-pdma
+          - const: sifive,pdma0
     description:
       Should be "sifive,<chip>-pdma" and "sifive,pdma<version>".
       Supported compatible strings are -
-- 
2.34.1

[PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Add new compatible name microchip,mpfs-pdma to support
out of order dma transfers

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index a1af0b906365..974467c4bacb 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -27,10 +27,14 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,fu540-c000-pdma
-      - const: sifive,pdma0
+    oneOf:
+      - items:
+          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
+          - const: sifive,fu540-c000-pdma # Sifive in-order DMA transfer
+      - items:
+          - enum:
+              - sifive,fu540-c000-pdma
+          - const: sifive,pdma0
     description:
       Should be "sifive,<chip>-pdma" and "sifive,pdma<version>".
       Supported compatible strings are -
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible name

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Sifive platform dma does not allow out-of-order transfers,
Add a PolarFire SoC specific compatible and code to support
for out-of-order dma transfers

Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 drivers/dma/sf-pdma/sf-pdma.c | 27 ++++++++++++++++++++++++---
 drivers/dma/sf-pdma/sf-pdma.h |  6 ++++++
 2 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
index 06a0912a12a1..a9ff319d4ca3 100644
--- a/drivers/dma/sf-pdma/sf-pdma.c
+++ b/drivers/dma/sf-pdma/sf-pdma.c
@@ -21,6 +21,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 #include <linux/of_dma.h>
+#include <linux/of_device.h>
 #include <linux/slab.h>
 
 #include "sf-pdma.h"
@@ -66,7 +67,7 @@ static struct sf_pdma_desc *sf_pdma_alloc_desc(struct sf_pdma_chan *chan)
 static void sf_pdma_fill_desc(struct sf_pdma_desc *desc,
 			      u64 dst, u64 src, u64 size)
 {
-	desc->xfer_type = PDMA_FULL_SPEED;
+	desc->xfer_type =  desc->chan->pdma->transfer_type;
 	desc->xfer_size = size;
 	desc->dst_addr = dst;
 	desc->src_addr = src;
@@ -520,6 +521,7 @@ static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
 
 static int sf_pdma_probe(struct platform_device *pdev)
 {
+	const struct sf_pdma_driver_platdata *ddata;
 	struct sf_pdma *pdma;
 	int ret, n_chans;
 	const enum dma_slave_buswidth widths =
@@ -545,6 +547,14 @@ static int sf_pdma_probe(struct platform_device *pdev)
 
 	pdma->n_chans = n_chans;
 
+	pdma->transfer_type = PDMA_FULL_SPEED;
+
+	ddata  = of_device_get_match_data(&pdev->dev);
+	if (ddata) {
+		if (ddata->quirks & NO_STRICT_ORDERING)
+			pdma->transfer_type &= ~(NO_STRICT_ORDERING);
+	}
+
 	pdma->membase = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pdma->membase))
 		return PTR_ERR(pdma->membase);
@@ -632,11 +642,22 @@ static int sf_pdma_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct sf_pdma_driver_platdata mpfs_pdma = {
+	.quirks = NO_STRICT_ORDERING,
+};
+
 static const struct of_device_id sf_pdma_dt_ids[] = {
-	{ .compatible = "sifive,fu540-c000-pdma" },
-	{ .compatible = "sifive,pdma0" },
+	{
+		.compatible = "sifive,fu540-c000-pdma",
+	}, {
+		.compatible = "sifive,pdma0",
+	}, {
+		.compatible = "microchip,mpfs-pdma",
+		.data	    = &mpfs_pdma,
+	},
 	{},
 };
+
 MODULE_DEVICE_TABLE(of, sf_pdma_dt_ids);
 
 static struct platform_driver sf_pdma_driver = {
diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
index 5c398a83b491..3b16db4daa0b 100644
--- a/drivers/dma/sf-pdma/sf-pdma.h
+++ b/drivers/dma/sf-pdma/sf-pdma.h
@@ -49,6 +49,7 @@
 
 /* Transfer Type */
 #define PDMA_FULL_SPEED					0xFF000008
+#define NO_STRICT_ORDERING				BIT(3)
 
 /* Error Recovery */
 #define MAX_RETRY					1
@@ -112,8 +113,13 @@ struct sf_pdma {
 	struct dma_device       dma_dev;
 	void __iomem            *membase;
 	void __iomem            *mappedbase;
+	u32			transfer_type;
 	u32			n_chans;
 	struct sf_pdma_chan	chans[];
 };
 
+struct sf_pdma_driver_platdata {
+	u32 quirks;
+};
+
 #endif /* _SF_PDMA_H */
-- 
2.34.1

[PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible name

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Sifive platform dma does not allow out-of-order transfers,
Add a PolarFire SoC specific compatible and code to support
for out-of-order dma transfers

Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 drivers/dma/sf-pdma/sf-pdma.c | 27 ++++++++++++++++++++++++---
 drivers/dma/sf-pdma/sf-pdma.h |  6 ++++++
 2 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
index 06a0912a12a1..a9ff319d4ca3 100644
--- a/drivers/dma/sf-pdma/sf-pdma.c
+++ b/drivers/dma/sf-pdma/sf-pdma.c
@@ -21,6 +21,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 #include <linux/of_dma.h>
+#include <linux/of_device.h>
 #include <linux/slab.h>
 
 #include "sf-pdma.h"
@@ -66,7 +67,7 @@ static struct sf_pdma_desc *sf_pdma_alloc_desc(struct sf_pdma_chan *chan)
 static void sf_pdma_fill_desc(struct sf_pdma_desc *desc,
 			      u64 dst, u64 src, u64 size)
 {
-	desc->xfer_type = PDMA_FULL_SPEED;
+	desc->xfer_type =  desc->chan->pdma->transfer_type;
 	desc->xfer_size = size;
 	desc->dst_addr = dst;
 	desc->src_addr = src;
@@ -520,6 +521,7 @@ static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
 
 static int sf_pdma_probe(struct platform_device *pdev)
 {
+	const struct sf_pdma_driver_platdata *ddata;
 	struct sf_pdma *pdma;
 	int ret, n_chans;
 	const enum dma_slave_buswidth widths =
@@ -545,6 +547,14 @@ static int sf_pdma_probe(struct platform_device *pdev)
 
 	pdma->n_chans = n_chans;
 
+	pdma->transfer_type = PDMA_FULL_SPEED;
+
+	ddata  = of_device_get_match_data(&pdev->dev);
+	if (ddata) {
+		if (ddata->quirks & NO_STRICT_ORDERING)
+			pdma->transfer_type &= ~(NO_STRICT_ORDERING);
+	}
+
 	pdma->membase = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pdma->membase))
 		return PTR_ERR(pdma->membase);
@@ -632,11 +642,22 @@ static int sf_pdma_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct sf_pdma_driver_platdata mpfs_pdma = {
+	.quirks = NO_STRICT_ORDERING,
+};
+
 static const struct of_device_id sf_pdma_dt_ids[] = {
-	{ .compatible = "sifive,fu540-c000-pdma" },
-	{ .compatible = "sifive,pdma0" },
+	{
+		.compatible = "sifive,fu540-c000-pdma",
+	}, {
+		.compatible = "sifive,pdma0",
+	}, {
+		.compatible = "microchip,mpfs-pdma",
+		.data	    = &mpfs_pdma,
+	},
 	{},
 };
+
 MODULE_DEVICE_TABLE(of, sf_pdma_dt_ids);
 
 static struct platform_driver sf_pdma_driver = {
diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
index 5c398a83b491..3b16db4daa0b 100644
--- a/drivers/dma/sf-pdma/sf-pdma.h
+++ b/drivers/dma/sf-pdma/sf-pdma.h
@@ -49,6 +49,7 @@
 
 /* Transfer Type */
 #define PDMA_FULL_SPEED					0xFF000008
+#define NO_STRICT_ORDERING				BIT(3)
 
 /* Error Recovery */
 #define MAX_RETRY					1
@@ -112,8 +113,13 @@ struct sf_pdma {
 	struct dma_device       dma_dev;
 	void __iomem            *membase;
 	void __iomem            *mappedbase;
+	u32			transfer_type;
 	u32			n_chans;
 	struct sf_pdma_chan	chans[];
 };
 
+struct sf_pdma_driver_platdata {
+	u32 quirks;
+};
+
 #endif /* _SF_PDMA_H */
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v2 4/4] riscv: dts: microchip: add specific compatible for mpfs' pdma

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Add specific compatible for PolarFire SoC for The SiFive PDMA driver

Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 arch/riscv/boot/dts/microchip/mpfs.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 104504352e99..05525d5c2c82 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -221,7 +221,7 @@ plic: interrupt-controller@c000000 {
 		};
 
 		pdma: dma-controller@3000000 {
-			compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+			compatible = "microchip,mpfs-pdma", "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic>;
 			interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
-- 
2.34.1

[PATCH v2 4/4] riscv: dts: microchip: add specific compatible for mpfs' pdma

[shravan chippa]

From: Shravan Chippa <shravan.chippa@microchip.com>

Add specific compatible for PolarFire SoC for The SiFive PDMA driver

Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 arch/riscv/boot/dts/microchip/mpfs.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 104504352e99..05525d5c2c82 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -221,7 +221,7 @@ plic: interrupt-controller@c000000 {
 		};
 
 		pdma: dma-controller@3000000 {
-			compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+			compatible = "microchip,mpfs-pdma", "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic>;
 			interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible name

[Emil Renner Berthing]

shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
>
> Sifive platform dma does not allow out-of-order transfers,
> Add a PolarFire SoC specific compatible and code to support
> for out-of-order dma transfers
>
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  drivers/dma/sf-pdma/sf-pdma.c | 27 ++++++++++++++++++++++++---
>  drivers/dma/sf-pdma/sf-pdma.h |  6 ++++++
>  2 files changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
> index 06a0912a12a1..a9ff319d4ca3 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.c
> +++ b/drivers/dma/sf-pdma/sf-pdma.c
> @@ -21,6 +21,7 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
>  #include <linux/of_dma.h>
> +#include <linux/of_device.h>
>  #include <linux/slab.h>
>
>  #include "sf-pdma.h"
> @@ -66,7 +67,7 @@ static struct sf_pdma_desc *sf_pdma_alloc_desc(struct sf_pdma_chan *chan)
>  static void sf_pdma_fill_desc(struct sf_pdma_desc *desc,
>  			      u64 dst, u64 src, u64 size)
>  {
> -	desc->xfer_type = PDMA_FULL_SPEED;
> +	desc->xfer_type =  desc->chan->pdma->transfer_type;

Two spaces.

>  	desc->xfer_size = size;
>  	desc->dst_addr = dst;
>  	desc->src_addr = src;
> @@ -520,6 +521,7 @@ static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
>
>  static int sf_pdma_probe(struct platform_device *pdev)
>  {
> +	const struct sf_pdma_driver_platdata *ddata;
>  	struct sf_pdma *pdma;
>  	int ret, n_chans;
>  	const enum dma_slave_buswidth widths =
> @@ -545,6 +547,14 @@ static int sf_pdma_probe(struct platform_device *pdev)
>
>  	pdma->n_chans = n_chans;
>
> +	pdma->transfer_type = PDMA_FULL_SPEED;
> +
> +	ddata  = of_device_get_match_data(&pdev->dev);
> +	if (ddata) {
> +		if (ddata->quirks & NO_STRICT_ORDERING)
> +			pdma->transfer_type &= ~(NO_STRICT_ORDERING);
> +	}
> +

The commit message says "Sifive platform dma does not allow out-of-order
transfers" so you want strict ordering by default and then allow
out-of-order transfers if the match data allows it, right?

But here bit 3 is set by default and cleared if the quirk is set, so it looks
like bit 3 actually means "strict ordering" and not "no strict ordering" as
you've named it.

The confusion here probably stems using the same define for the quirk and the
xfer_type. Unless I'm mistaken above I'd find something like this a lot easier
to read:

sf_pdma.h:
#define PDMA_FULL_SPEED		0xFF000000
#define PDMA_STRICT_ORDERING	BIT(3)

sf_pdma.c:
#define PDMA_QUIRK_NO_STRICT_ORDERING	BIT(0)

dma->transfer_type = PDMA_FULL_SPEED | PDMA_STRICT_ORDERING;
...
if (ddata->quirks & PDMA_QUIRK_NO_STRICT_ORDERING)
	pdma->transfer_type &= ~PDMA_STRICT_ORDERING;

>  	pdma->membase = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(pdma->membase))
>  		return PTR_ERR(pdma->membase);
> @@ -632,11 +642,22 @@ static int sf_pdma_remove(struct platform_device *pdev)
>  	return 0;
>  }
>
> +static const struct sf_pdma_driver_platdata mpfs_pdma = {
> +	.quirks = NO_STRICT_ORDERING,
> +};
> +
>  static const struct of_device_id sf_pdma_dt_ids[] = {
> -	{ .compatible = "sifive,fu540-c000-pdma" },
> -	{ .compatible = "sifive,pdma0" },
> +	{
> +		.compatible = "sifive,fu540-c000-pdma",
> +	}, {
> +		.compatible = "sifive,pdma0",
> +	}, {
> +		.compatible = "microchip,mpfs-pdma",
> +		.data	    = &mpfs_pdma,
> +	},
>  	{},
>  };
> +
>  MODULE_DEVICE_TABLE(of, sf_pdma_dt_ids);
>
>  static struct platform_driver sf_pdma_driver = {
> diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
> index 5c398a83b491..3b16db4daa0b 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.h
> +++ b/drivers/dma/sf-pdma/sf-pdma.h
> @@ -49,6 +49,7 @@
>
>  /* Transfer Type */
>  #define PDMA_FULL_SPEED					0xFF000008
> +#define NO_STRICT_ORDERING				BIT(3)
>
>  /* Error Recovery */
>  #define MAX_RETRY					1
> @@ -112,8 +113,13 @@ struct sf_pdma {
>  	struct dma_device       dma_dev;
>  	void __iomem            *membase;
>  	void __iomem            *mappedbase;
> +	u32			transfer_type;
>  	u32			n_chans;
>  	struct sf_pdma_chan	chans[];
>  };
>
> +struct sf_pdma_driver_platdata {
> +	u32 quirks;
> +};
> +
>  #endif /* _SF_PDMA_H */
> --
> 2.34.1

Re: [PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible name

[Emil Renner Berthing]

shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
>
> Sifive platform dma does not allow out-of-order transfers,
> Add a PolarFire SoC specific compatible and code to support
> for out-of-order dma transfers
>
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  drivers/dma/sf-pdma/sf-pdma.c | 27 ++++++++++++++++++++++++---
>  drivers/dma/sf-pdma/sf-pdma.h |  6 ++++++
>  2 files changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
> index 06a0912a12a1..a9ff319d4ca3 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.c
> +++ b/drivers/dma/sf-pdma/sf-pdma.c
> @@ -21,6 +21,7 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
>  #include <linux/of_dma.h>
> +#include <linux/of_device.h>
>  #include <linux/slab.h>
>
>  #include "sf-pdma.h"
> @@ -66,7 +67,7 @@ static struct sf_pdma_desc *sf_pdma_alloc_desc(struct sf_pdma_chan *chan)
>  static void sf_pdma_fill_desc(struct sf_pdma_desc *desc,
>  			      u64 dst, u64 src, u64 size)
>  {
> -	desc->xfer_type = PDMA_FULL_SPEED;
> +	desc->xfer_type =  desc->chan->pdma->transfer_type;

Two spaces.

>  	desc->xfer_size = size;
>  	desc->dst_addr = dst;
>  	desc->src_addr = src;
> @@ -520,6 +521,7 @@ static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
>
>  static int sf_pdma_probe(struct platform_device *pdev)
>  {
> +	const struct sf_pdma_driver_platdata *ddata;
>  	struct sf_pdma *pdma;
>  	int ret, n_chans;
>  	const enum dma_slave_buswidth widths =
> @@ -545,6 +547,14 @@ static int sf_pdma_probe(struct platform_device *pdev)
>
>  	pdma->n_chans = n_chans;
>
> +	pdma->transfer_type = PDMA_FULL_SPEED;
> +
> +	ddata  = of_device_get_match_data(&pdev->dev);
> +	if (ddata) {
> +		if (ddata->quirks & NO_STRICT_ORDERING)
> +			pdma->transfer_type &= ~(NO_STRICT_ORDERING);
> +	}
> +

The commit message says "Sifive platform dma does not allow out-of-order
transfers" so you want strict ordering by default and then allow
out-of-order transfers if the match data allows it, right?

But here bit 3 is set by default and cleared if the quirk is set, so it looks
like bit 3 actually means "strict ordering" and not "no strict ordering" as
you've named it.

The confusion here probably stems using the same define for the quirk and the
xfer_type. Unless I'm mistaken above I'd find something like this a lot easier
to read:

sf_pdma.h:
#define PDMA_FULL_SPEED		0xFF000000
#define PDMA_STRICT_ORDERING	BIT(3)

sf_pdma.c:
#define PDMA_QUIRK_NO_STRICT_ORDERING	BIT(0)

dma->transfer_type = PDMA_FULL_SPEED | PDMA_STRICT_ORDERING;
...
if (ddata->quirks & PDMA_QUIRK_NO_STRICT_ORDERING)
	pdma->transfer_type &= ~PDMA_STRICT_ORDERING;

>  	pdma->membase = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(pdma->membase))
>  		return PTR_ERR(pdma->membase);
> @@ -632,11 +642,22 @@ static int sf_pdma_remove(struct platform_device *pdev)
>  	return 0;
>  }
>
> +static const struct sf_pdma_driver_platdata mpfs_pdma = {
> +	.quirks = NO_STRICT_ORDERING,
> +};
> +
>  static const struct of_device_id sf_pdma_dt_ids[] = {
> -	{ .compatible = "sifive,fu540-c000-pdma" },
> -	{ .compatible = "sifive,pdma0" },
> +	{
> +		.compatible = "sifive,fu540-c000-pdma",
> +	}, {
> +		.compatible = "sifive,pdma0",
> +	}, {
> +		.compatible = "microchip,mpfs-pdma",
> +		.data	    = &mpfs_pdma,
> +	},
>  	{},
>  };
> +
>  MODULE_DEVICE_TABLE(of, sf_pdma_dt_ids);
>
>  static struct platform_driver sf_pdma_driver = {
> diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
> index 5c398a83b491..3b16db4daa0b 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.h
> +++ b/drivers/dma/sf-pdma/sf-pdma.h
> @@ -49,6 +49,7 @@
>
>  /* Transfer Type */
>  #define PDMA_FULL_SPEED					0xFF000008
> +#define NO_STRICT_ORDERING				BIT(3)
>
>  /* Error Recovery */
>  #define MAX_RETRY					1
> @@ -112,8 +113,13 @@ struct sf_pdma {
>  	struct dma_device       dma_dev;
>  	void __iomem            *membase;
>  	void __iomem            *mappedbase;
> +	u32			transfer_type;
>  	u32			n_chans;
>  	struct sf_pdma_chan	chans[];
>  };
>
> +struct sf_pdma_driver_platdata {
> +	u32 quirks;
> +};
> +
>  #endif /* _SF_PDMA_H */
> --
> 2.34.1

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 1/4] dmaengine: sf-pdma: Support of_dma_controller_register()

[Emil Renner Berthing]

shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
>
> Update sf-pdma driver to adopt generic DMA device tree bindings.
> It calls of_dma_controller_register() with sf-pdma specific
> of_dma_xlate to get the generic DMA device tree helper support
> and the DMA clients can look up the sf-pdma controller using
> standard APIs.
>
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  drivers/dma/sf-pdma/sf-pdma.c | 44 +++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>
> diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
> index d1c6956af452..06a0912a12a1 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.c
> +++ b/drivers/dma/sf-pdma/sf-pdma.c
> @@ -20,6 +20,7 @@
>  #include <linux/mod_devicetable.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
> +#include <linux/of_dma.h>
>  #include <linux/slab.h>
>
>  #include "sf-pdma.h"
> @@ -490,6 +491,33 @@ static void sf_pdma_setup_chans(struct sf_pdma *pdma)
>  	}
>  }
>
> +static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
> +					 struct of_dma *ofdma)
> +{
> +	struct sf_pdma *pdma = ofdma->of_dma_data;
> +	struct device *dev = pdma->dma_dev.dev;
> +	struct sf_pdma_chan  *chan;

If you're respinning this series anyway, you have two spaces here.

> +	struct dma_chan *c;
> +	u32 channel_id;
> +
> +	if (dma_spec->args_count != 1) {
> +		dev_err(dev, "Bad number of cells\n");
> +		return NULL;
> +	}
> +
> +	channel_id = dma_spec->args[0];
> +
> +	chan = &pdma->chans[channel_id];
> +
> +	c = dma_get_slave_channel(&chan->vchan.chan);
> +	if (!c) {
> +	dev_err(dev, "No more channels available\n");
> +		return NULL;
> +	}
> +
> +	return c;
> +}
> +
>  static int sf_pdma_probe(struct platform_device *pdev)
>  {
>  	struct sf_pdma *pdma;
> @@ -563,7 +591,20 @@ static int sf_pdma_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>
> +	ret = of_dma_controller_register(pdev->dev.of_node,
> +					 sf_pdma_of_xlate, pdma);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +			"Can't register SiFive Platform OF_DMA. (%d)\n", ret);
> +		goto err_unregister;
> +	}
> +
>  	return 0;
> +
> +err_unregister:
> +	dma_async_device_unregister(&pdma->dma_dev);
> +
> +	return ret;
>  }
>
>  static int sf_pdma_remove(struct platform_device *pdev)
> @@ -583,6 +624,9 @@ static int sf_pdma_remove(struct platform_device *pdev)
>  		tasklet_kill(&ch->err_tasklet);
>  	}
>
> +	if (pdev->dev.of_node)
> +		of_dma_controller_free(pdev->dev.of_node);
> +
>  	dma_async_device_unregister(&pdma->dma_dev);
>
>  	return 0;
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 1/4] dmaengine: sf-pdma: Support of_dma_controller_register()

[Emil Renner Berthing]

shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
>
> Update sf-pdma driver to adopt generic DMA device tree bindings.
> It calls of_dma_controller_register() with sf-pdma specific
> of_dma_xlate to get the generic DMA device tree helper support
> and the DMA clients can look up the sf-pdma controller using
> standard APIs.
>
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  drivers/dma/sf-pdma/sf-pdma.c | 44 +++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>
> diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
> index d1c6956af452..06a0912a12a1 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.c
> +++ b/drivers/dma/sf-pdma/sf-pdma.c
> @@ -20,6 +20,7 @@
>  #include <linux/mod_devicetable.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
> +#include <linux/of_dma.h>
>  #include <linux/slab.h>
>
>  #include "sf-pdma.h"
> @@ -490,6 +491,33 @@ static void sf_pdma_setup_chans(struct sf_pdma *pdma)
>  	}
>  }
>
> +static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
> +					 struct of_dma *ofdma)
> +{
> +	struct sf_pdma *pdma = ofdma->of_dma_data;
> +	struct device *dev = pdma->dma_dev.dev;
> +	struct sf_pdma_chan  *chan;

If you're respinning this series anyway, you have two spaces here.

> +	struct dma_chan *c;
> +	u32 channel_id;
> +
> +	if (dma_spec->args_count != 1) {
> +		dev_err(dev, "Bad number of cells\n");
> +		return NULL;
> +	}
> +
> +	channel_id = dma_spec->args[0];
> +
> +	chan = &pdma->chans[channel_id];
> +
> +	c = dma_get_slave_channel(&chan->vchan.chan);
> +	if (!c) {
> +	dev_err(dev, "No more channels available\n");
> +		return NULL;
> +	}
> +
> +	return c;
> +}
> +
>  static int sf_pdma_probe(struct platform_device *pdev)
>  {
>  	struct sf_pdma *pdma;
> @@ -563,7 +591,20 @@ static int sf_pdma_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>
> +	ret = of_dma_controller_register(pdev->dev.of_node,
> +					 sf_pdma_of_xlate, pdma);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +			"Can't register SiFive Platform OF_DMA. (%d)\n", ret);
> +		goto err_unregister;
> +	}
> +
>  	return 0;
> +
> +err_unregister:
> +	dma_async_device_unregister(&pdma->dma_dev);
> +
> +	return ret;
>  }
>
>  static int sf_pdma_remove(struct platform_device *pdev)
> @@ -583,6 +624,9 @@ static int sf_pdma_remove(struct platform_device *pdev)
>  		tasklet_kill(&ch->err_tasklet);
>  	}
>
> +	if (pdev->dev.of_node)
> +		of_dma_controller_free(pdev->dev.of_node);
> +
>  	dma_async_device_unregister(&pdma->dma_dev);
>
>  	return 0;
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

RE: [PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible name

[Shravan.Chippa]

Hi Emil Renner,

> -----Original Message-----
> From: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> Sent: Tuesday, October 3, 2023 1:05 PM
> To: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>;
> green.wan@sifive.com; vkoul@kernel.org; robh+dt@kernel.org;
> krzysztof.kozlowski+dt@linaro.org; palmer@dabbelt.com;
> paul.walmsley@sifive.com; conor+dt@kernel.org
> Cc: dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-
> riscv@lists.infradead.org; linux-kernel@vger.kernel.org; Nagasuresh Relli - I67208
> <Nagasuresh.Relli@microchip.com>; Praveen Kumar - I30718
> <Praveen.Kumar@microchip.com>
> Subject: Re: [PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible
> name
> 
> [You don't often get email from emil.renner.berthing@canonical.com. Learn why
> this is important at https://aka.ms/LearnAboutSenderIdentification ]
> 
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> 
> shravan chippa wrote:
> > From: Shravan Chippa <shravan.chippa@microchip.com>
> >
> > Sifive platform dma does not allow out-of-order transfers, Add a
> > PolarFire SoC specific compatible and code to support for out-of-order
> > dma transfers
> >
> > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > ---
> >  drivers/dma/sf-pdma/sf-pdma.c | 27 ++++++++++++++++++++++++---
> > drivers/dma/sf-pdma/sf-pdma.h |  6 ++++++
> >  2 files changed, 30 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/dma/sf-pdma/sf-pdma.c
> > b/drivers/dma/sf-pdma/sf-pdma.c index 06a0912a12a1..a9ff319d4ca3
> > 100644
> > --- a/drivers/dma/sf-pdma/sf-pdma.c
> > +++ b/drivers/dma/sf-pdma/sf-pdma.c
> > @@ -21,6 +21,7 @@
> >  #include <linux/dma-mapping.h>
> >  #include <linux/of.h>
> >  #include <linux/of_dma.h>
> > +#include <linux/of_device.h>
> >  #include <linux/slab.h>
> >
> >  #include "sf-pdma.h"
> > @@ -66,7 +67,7 @@ static struct sf_pdma_desc
> > *sf_pdma_alloc_desc(struct sf_pdma_chan *chan)  static void
> sf_pdma_fill_desc(struct sf_pdma_desc *desc,
> >                             u64 dst, u64 src, u64 size)  {
> > -     desc->xfer_type = PDMA_FULL_SPEED;
> > +     desc->xfer_type =  desc->chan->pdma->transfer_type;
> 
> Two spaces.
> 
> >       desc->xfer_size = size;
> >       desc->dst_addr = dst;
> >       desc->src_addr = src;
> > @@ -520,6 +521,7 @@ static struct dma_chan *sf_pdma_of_xlate(struct
> of_phandle_args *dma_spec,
> >
> >  static int sf_pdma_probe(struct platform_device *pdev)
> >  {
> > +     const struct sf_pdma_driver_platdata *ddata;
> >       struct sf_pdma *pdma;
> >       int ret, n_chans;
> >       const enum dma_slave_buswidth widths =
> > @@ -545,6 +547,14 @@ static int sf_pdma_probe(struct platform_device
> *pdev)
> >
> >       pdma->n_chans = n_chans;
> >
> > +     pdma->transfer_type = PDMA_FULL_SPEED;
> > +
> > +     ddata  = of_device_get_match_data(&pdev->dev);
> > +     if (ddata) {
> > +             if (ddata->quirks & NO_STRICT_ORDERING)
> > +                     pdma->transfer_type &= ~(NO_STRICT_ORDERING);
> > +     }
> > +
> 
> The commit message says "Sifive platform dma does not allow out-of-order
> transfers" so you want strict ordering by default and then allow
> out-of-order transfers if the match data allows it, right?
> 
> But here bit 3 is set by default and cleared if the quirk is set, so it looks
> like bit 3 actually means "strict ordering" and not "no strict ordering" as
> you've named it.
> 
> The confusion here probably stems using the same define for the quirk and the
> xfer_type. Unless I'm mistaken above I'd find something like this a lot easier
> to read:
> 
> sf_pdma.h:
> #define PDMA_FULL_SPEED         0xFF000000
> #define PDMA_STRICT_ORDERING    BIT(3)
> 
> sf_pdma.c:
> #define PDMA_QUIRK_NO_STRICT_ORDERING   BIT(0)
> 
> dma->transfer_type = PDMA_FULL_SPEED | PDMA_STRICT_ORDERING;
> ...
> if (ddata->quirks & PDMA_QUIRK_NO_STRICT_ORDERING)
>         pdma->transfer_type &= ~PDMA_STRICT_ORDERING;
> 

Thanks for the input. To avoid confusion on the naming of the macro and new macro for quirk
I will try to modify it as you mentioned.

Thanks,
Shravan

> >       pdma->membase = devm_platform_ioremap_resource(pdev, 0);
> >       if (IS_ERR(pdma->membase))
> >               return PTR_ERR(pdma->membase);
> > @@ -632,11 +642,22 @@ static int sf_pdma_remove(struct platform_device
> *pdev)
> >       return 0;
> >  }
> >
> > +static const struct sf_pdma_driver_platdata mpfs_pdma = {
> > +     .quirks = NO_STRICT_ORDERING,
> > +};
> > +
> >  static const struct of_device_id sf_pdma_dt_ids[] = {
> > -     { .compatible = "sifive,fu540-c000-pdma" },
> > -     { .compatible = "sifive,pdma0" },
> > +     {
> > +             .compatible = "sifive,fu540-c000-pdma",
> > +     }, {
> > +             .compatible = "sifive,pdma0",
> > +     }, {
> > +             .compatible = "microchip,mpfs-pdma",
> > +             .data       = &mpfs_pdma,
> > +     },
> >       {},
> >  };
> > +
> >  MODULE_DEVICE_TABLE(of, sf_pdma_dt_ids);
> >
> >  static struct platform_driver sf_pdma_driver = {
> > diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
> > index 5c398a83b491..3b16db4daa0b 100644
> > --- a/drivers/dma/sf-pdma/sf-pdma.h
> > +++ b/drivers/dma/sf-pdma/sf-pdma.h
> > @@ -49,6 +49,7 @@
> >
> >  /* Transfer Type */
> >  #define PDMA_FULL_SPEED                                      0xFF000008
> > +#define NO_STRICT_ORDERING                           BIT(3)
> >
> >  /* Error Recovery */
> >  #define MAX_RETRY                                    1
> > @@ -112,8 +113,13 @@ struct sf_pdma {
> >       struct dma_device       dma_dev;
> >       void __iomem            *membase;
> >       void __iomem            *mappedbase;
> > +     u32                     transfer_type;
> >       u32                     n_chans;
> >       struct sf_pdma_chan     chans[];
> >  };
> >
> > +struct sf_pdma_driver_platdata {
> > +     u32 quirks;
> > +};
> > +
> >  #endif /* _SF_PDMA_H */
> > --
> > 2.34.1

RE: [PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible name

[Shravan.Chippa]

Hi Emil Renner,

> -----Original Message-----
> From: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> Sent: Tuesday, October 3, 2023 1:05 PM
> To: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>;
> green.wan@sifive.com; vkoul@kernel.org; robh+dt@kernel.org;
> krzysztof.kozlowski+dt@linaro.org; palmer@dabbelt.com;
> paul.walmsley@sifive.com; conor+dt@kernel.org
> Cc: dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-
> riscv@lists.infradead.org; linux-kernel@vger.kernel.org; Nagasuresh Relli - I67208
> <Nagasuresh.Relli@microchip.com>; Praveen Kumar - I30718
> <Praveen.Kumar@microchip.com>
> Subject: Re: [PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible
> name
> 
> [You don't often get email from emil.renner.berthing@canonical.com. Learn why
> this is important at https://aka.ms/LearnAboutSenderIdentification ]
> 
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> 
> shravan chippa wrote:
> > From: Shravan Chippa <shravan.chippa@microchip.com>
> >
> > Sifive platform dma does not allow out-of-order transfers, Add a
> > PolarFire SoC specific compatible and code to support for out-of-order
> > dma transfers
> >
> > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > ---
> >  drivers/dma/sf-pdma/sf-pdma.c | 27 ++++++++++++++++++++++++---
> > drivers/dma/sf-pdma/sf-pdma.h |  6 ++++++
> >  2 files changed, 30 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/dma/sf-pdma/sf-pdma.c
> > b/drivers/dma/sf-pdma/sf-pdma.c index 06a0912a12a1..a9ff319d4ca3
> > 100644
> > --- a/drivers/dma/sf-pdma/sf-pdma.c
> > +++ b/drivers/dma/sf-pdma/sf-pdma.c
> > @@ -21,6 +21,7 @@
> >  #include <linux/dma-mapping.h>
> >  #include <linux/of.h>
> >  #include <linux/of_dma.h>
> > +#include <linux/of_device.h>
> >  #include <linux/slab.h>
> >
> >  #include "sf-pdma.h"
> > @@ -66,7 +67,7 @@ static struct sf_pdma_desc
> > *sf_pdma_alloc_desc(struct sf_pdma_chan *chan)  static void
> sf_pdma_fill_desc(struct sf_pdma_desc *desc,
> >                             u64 dst, u64 src, u64 size)  {
> > -     desc->xfer_type = PDMA_FULL_SPEED;
> > +     desc->xfer_type =  desc->chan->pdma->transfer_type;
> 
> Two spaces.
> 
> >       desc->xfer_size = size;
> >       desc->dst_addr = dst;
> >       desc->src_addr = src;
> > @@ -520,6 +521,7 @@ static struct dma_chan *sf_pdma_of_xlate(struct
> of_phandle_args *dma_spec,
> >
> >  static int sf_pdma_probe(struct platform_device *pdev)
> >  {
> > +     const struct sf_pdma_driver_platdata *ddata;
> >       struct sf_pdma *pdma;
> >       int ret, n_chans;
> >       const enum dma_slave_buswidth widths =
> > @@ -545,6 +547,14 @@ static int sf_pdma_probe(struct platform_device
> *pdev)
> >
> >       pdma->n_chans = n_chans;
> >
> > +     pdma->transfer_type = PDMA_FULL_SPEED;
> > +
> > +     ddata  = of_device_get_match_data(&pdev->dev);
> > +     if (ddata) {
> > +             if (ddata->quirks & NO_STRICT_ORDERING)
> > +                     pdma->transfer_type &= ~(NO_STRICT_ORDERING);
> > +     }
> > +
> 
> The commit message says "Sifive platform dma does not allow out-of-order
> transfers" so you want strict ordering by default and then allow
> out-of-order transfers if the match data allows it, right?
> 
> But here bit 3 is set by default and cleared if the quirk is set, so it looks
> like bit 3 actually means "strict ordering" and not "no strict ordering" as
> you've named it.
> 
> The confusion here probably stems using the same define for the quirk and the
> xfer_type. Unless I'm mistaken above I'd find something like this a lot easier
> to read:
> 
> sf_pdma.h:
> #define PDMA_FULL_SPEED         0xFF000000
> #define PDMA_STRICT_ORDERING    BIT(3)
> 
> sf_pdma.c:
> #define PDMA_QUIRK_NO_STRICT_ORDERING   BIT(0)
> 
> dma->transfer_type = PDMA_FULL_SPEED | PDMA_STRICT_ORDERING;
> ...
> if (ddata->quirks & PDMA_QUIRK_NO_STRICT_ORDERING)
>         pdma->transfer_type &= ~PDMA_STRICT_ORDERING;
> 

Thanks for the input. To avoid confusion on the naming of the macro and new macro for quirk
I will try to modify it as you mentioned.

Thanks,
Shravan

> >       pdma->membase = devm_platform_ioremap_resource(pdev, 0);
> >       if (IS_ERR(pdma->membase))
> >               return PTR_ERR(pdma->membase);
> > @@ -632,11 +642,22 @@ static int sf_pdma_remove(struct platform_device
> *pdev)
> >       return 0;
> >  }
> >
> > +static const struct sf_pdma_driver_platdata mpfs_pdma = {
> > +     .quirks = NO_STRICT_ORDERING,
> > +};
> > +
> >  static const struct of_device_id sf_pdma_dt_ids[] = {
> > -     { .compatible = "sifive,fu540-c000-pdma" },
> > -     { .compatible = "sifive,pdma0" },
> > +     {
> > +             .compatible = "sifive,fu540-c000-pdma",
> > +     }, {
> > +             .compatible = "sifive,pdma0",
> > +     }, {
> > +             .compatible = "microchip,mpfs-pdma",
> > +             .data       = &mpfs_pdma,
> > +     },
> >       {},
> >  };
> > +
> >  MODULE_DEVICE_TABLE(of, sf_pdma_dt_ids);
> >
> >  static struct platform_driver sf_pdma_driver = {
> > diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
> > index 5c398a83b491..3b16db4daa0b 100644
> > --- a/drivers/dma/sf-pdma/sf-pdma.h
> > +++ b/drivers/dma/sf-pdma/sf-pdma.h
> > @@ -49,6 +49,7 @@
> >
> >  /* Transfer Type */
> >  #define PDMA_FULL_SPEED                                      0xFF000008
> > +#define NO_STRICT_ORDERING                           BIT(3)
> >
> >  /* Error Recovery */
> >  #define MAX_RETRY                                    1
> > @@ -112,8 +113,13 @@ struct sf_pdma {
> >       struct dma_device       dma_dev;
> >       void __iomem            *membase;
> >       void __iomem            *mappedbase;
> > +     u32                     transfer_type;
> >       u32                     n_chans;
> >       struct sf_pdma_chan     chans[];
> >  };
> >
> > +struct sf_pdma_driver_platdata {
> > +     u32 quirks;
> > +};
> > +
> >  #endif /* _SF_PDMA_H */
> > --
> > 2.34.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible name

[Rob Herring]

On Tue, Oct 03, 2023 at 09:52:14AM +0530, shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
> 
> Sifive platform dma does not allow out-of-order transfers,
> Add a PolarFire SoC specific compatible and code to support
> for out-of-order dma transfers
> 
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  drivers/dma/sf-pdma/sf-pdma.c | 27 ++++++++++++++++++++++++---
>  drivers/dma/sf-pdma/sf-pdma.h |  6 ++++++
>  2 files changed, 30 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
> index 06a0912a12a1..a9ff319d4ca3 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.c
> +++ b/drivers/dma/sf-pdma/sf-pdma.c
> @@ -21,6 +21,7 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
>  #include <linux/of_dma.h>
> +#include <linux/of_device.h>

Wrong header.

>  #include <linux/slab.h>
>  
>  #include "sf-pdma.h"
> @@ -66,7 +67,7 @@ static struct sf_pdma_desc *sf_pdma_alloc_desc(struct sf_pdma_chan *chan)
>  static void sf_pdma_fill_desc(struct sf_pdma_desc *desc,
>  			      u64 dst, u64 src, u64 size)
>  {
> -	desc->xfer_type = PDMA_FULL_SPEED;
> +	desc->xfer_type =  desc->chan->pdma->transfer_type;
>  	desc->xfer_size = size;
>  	desc->dst_addr = dst;
>  	desc->src_addr = src;
> @@ -520,6 +521,7 @@ static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
>  
>  static int sf_pdma_probe(struct platform_device *pdev)
>  {
> +	const struct sf_pdma_driver_platdata *ddata;
>  	struct sf_pdma *pdma;
>  	int ret, n_chans;
>  	const enum dma_slave_buswidth widths =
> @@ -545,6 +547,14 @@ static int sf_pdma_probe(struct platform_device *pdev)
>  
>  	pdma->n_chans = n_chans;
>  
> +	pdma->transfer_type = PDMA_FULL_SPEED;
> +
> +	ddata  = of_device_get_match_data(&pdev->dev);

Use device_get_match_data() instead

> +	if (ddata) {
> +		if (ddata->quirks & NO_STRICT_ORDERING)
> +			pdma->transfer_type &= ~(NO_STRICT_ORDERING);
> +	}
> +
>  	pdma->membase = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(pdma->membase))
>  		return PTR_ERR(pdma->membase);
> @@ -632,11 +642,22 @@ static int sf_pdma_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct sf_pdma_driver_platdata mpfs_pdma = {
> +	.quirks = NO_STRICT_ORDERING,
> +};
> +
>  static const struct of_device_id sf_pdma_dt_ids[] = {
> -	{ .compatible = "sifive,fu540-c000-pdma" },
> -	{ .compatible = "sifive,pdma0" },
> +	{
> +		.compatible = "sifive,fu540-c000-pdma",
> +	}, {
> +		.compatible = "sifive,pdma0",
> +	}, {
> +		.compatible = "microchip,mpfs-pdma",
> +		.data	    = &mpfs_pdma,
> +	},
>  	{},
>  };
> +
>  MODULE_DEVICE_TABLE(of, sf_pdma_dt_ids);
>  
>  static struct platform_driver sf_pdma_driver = {
> diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
> index 5c398a83b491..3b16db4daa0b 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.h
> +++ b/drivers/dma/sf-pdma/sf-pdma.h
> @@ -49,6 +49,7 @@
>  
>  /* Transfer Type */
>  #define PDMA_FULL_SPEED					0xFF000008
> +#define NO_STRICT_ORDERING				BIT(3)
>  
>  /* Error Recovery */
>  #define MAX_RETRY					1
> @@ -112,8 +113,13 @@ struct sf_pdma {
>  	struct dma_device       dma_dev;
>  	void __iomem            *membase;
>  	void __iomem            *mappedbase;
> +	u32			transfer_type;
>  	u32			n_chans;
>  	struct sf_pdma_chan	chans[];
>  };
>  
> +struct sf_pdma_driver_platdata {
> +	u32 quirks;
> +};
> +
>  #endif /* _SF_PDMA_H */
> -- 
> 2.34.1
> 

Re: [PATCH v2 3/4] dmaengine: sf-pdma: add mpfs-pdma compatible name

[Rob Herring]

On Tue, Oct 03, 2023 at 09:52:14AM +0530, shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
> 
> Sifive platform dma does not allow out-of-order transfers,
> Add a PolarFire SoC specific compatible and code to support
> for out-of-order dma transfers
> 
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  drivers/dma/sf-pdma/sf-pdma.c | 27 ++++++++++++++++++++++++---
>  drivers/dma/sf-pdma/sf-pdma.h |  6 ++++++
>  2 files changed, 30 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
> index 06a0912a12a1..a9ff319d4ca3 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.c
> +++ b/drivers/dma/sf-pdma/sf-pdma.c
> @@ -21,6 +21,7 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
>  #include <linux/of_dma.h>
> +#include <linux/of_device.h>

Wrong header.

>  #include <linux/slab.h>
>  
>  #include "sf-pdma.h"
> @@ -66,7 +67,7 @@ static struct sf_pdma_desc *sf_pdma_alloc_desc(struct sf_pdma_chan *chan)
>  static void sf_pdma_fill_desc(struct sf_pdma_desc *desc,
>  			      u64 dst, u64 src, u64 size)
>  {
> -	desc->xfer_type = PDMA_FULL_SPEED;
> +	desc->xfer_type =  desc->chan->pdma->transfer_type;
>  	desc->xfer_size = size;
>  	desc->dst_addr = dst;
>  	desc->src_addr = src;
> @@ -520,6 +521,7 @@ static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
>  
>  static int sf_pdma_probe(struct platform_device *pdev)
>  {
> +	const struct sf_pdma_driver_platdata *ddata;
>  	struct sf_pdma *pdma;
>  	int ret, n_chans;
>  	const enum dma_slave_buswidth widths =
> @@ -545,6 +547,14 @@ static int sf_pdma_probe(struct platform_device *pdev)
>  
>  	pdma->n_chans = n_chans;
>  
> +	pdma->transfer_type = PDMA_FULL_SPEED;
> +
> +	ddata  = of_device_get_match_data(&pdev->dev);

Use device_get_match_data() instead

> +	if (ddata) {
> +		if (ddata->quirks & NO_STRICT_ORDERING)
> +			pdma->transfer_type &= ~(NO_STRICT_ORDERING);
> +	}
> +
>  	pdma->membase = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(pdma->membase))
>  		return PTR_ERR(pdma->membase);
> @@ -632,11 +642,22 @@ static int sf_pdma_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct sf_pdma_driver_platdata mpfs_pdma = {
> +	.quirks = NO_STRICT_ORDERING,
> +};
> +
>  static const struct of_device_id sf_pdma_dt_ids[] = {
> -	{ .compatible = "sifive,fu540-c000-pdma" },
> -	{ .compatible = "sifive,pdma0" },
> +	{
> +		.compatible = "sifive,fu540-c000-pdma",
> +	}, {
> +		.compatible = "sifive,pdma0",
> +	}, {
> +		.compatible = "microchip,mpfs-pdma",
> +		.data	    = &mpfs_pdma,
> +	},
>  	{},
>  };
> +
>  MODULE_DEVICE_TABLE(of, sf_pdma_dt_ids);
>  
>  static struct platform_driver sf_pdma_driver = {
> diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
> index 5c398a83b491..3b16db4daa0b 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.h
> +++ b/drivers/dma/sf-pdma/sf-pdma.h
> @@ -49,6 +49,7 @@
>  
>  /* Transfer Type */
>  #define PDMA_FULL_SPEED					0xFF000008
> +#define NO_STRICT_ORDERING				BIT(3)
>  
>  /* Error Recovery */
>  #define MAX_RETRY					1
> @@ -112,8 +113,13 @@ struct sf_pdma {
>  	struct dma_device       dma_dev;
>  	void __iomem            *membase;
>  	void __iomem            *mappedbase;
> +	u32			transfer_type;
>  	u32			n_chans;
>  	struct sf_pdma_chan	chans[];
>  };
>  
> +struct sf_pdma_driver_platdata {
> +	u32 quirks;
> +};
> +
>  #endif /* _SF_PDMA_H */
> -- 
> 2.34.1
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Rob Herring]

On Tue, Oct 03, 2023 at 09:52:13AM +0530, shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
> 
> Add new compatible name microchip,mpfs-pdma to support
> out of order dma transfers
> 
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> index a1af0b906365..974467c4bacb 100644
> --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> @@ -27,10 +27,14 @@ allOf:
>  
>  properties:
>    compatible:
> -    items:
> -      - enum:
> -          - sifive,fu540-c000-pdma
> -      - const: sifive,pdma0
> +    oneOf:
> +      - items:
> +          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
> +          - const: sifive,fu540-c000-pdma # Sifive in-order DMA transfer

This doesn't really make sense. microchip,mpfs-pdma is compatible with 
sifive,fu540-c000-pdma and sifive,fu540-c000-pdma is compatible with 
sifive,pdma0, but microchip,mpfs-pdma is not compatible with 
sifive,pdma0? (Or replace "compatible with" with "a superset of")

Any fallback is only useful if an OS only understanding the fallback 
will work with the h/w. Does this h/w work without the driver changes?

Rob

Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Rob Herring]

On Tue, Oct 03, 2023 at 09:52:13AM +0530, shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
> 
> Add new compatible name microchip,mpfs-pdma to support
> out of order dma transfers
> 
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> index a1af0b906365..974467c4bacb 100644
> --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> @@ -27,10 +27,14 @@ allOf:
>  
>  properties:
>    compatible:
> -    items:
> -      - enum:
> -          - sifive,fu540-c000-pdma
> -      - const: sifive,pdma0
> +    oneOf:
> +      - items:
> +          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
> +          - const: sifive,fu540-c000-pdma # Sifive in-order DMA transfer

This doesn't really make sense. microchip,mpfs-pdma is compatible with 
sifive,fu540-c000-pdma and sifive,fu540-c000-pdma is compatible with 
sifive,pdma0, but microchip,mpfs-pdma is not compatible with 
sifive,pdma0? (Or replace "compatible with" with "a superset of")

Any fallback is only useful if an OS only understanding the fallback 
will work with the h/w. Does this h/w work without the driver changes?

Rob

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 2411 bytes --]

On Wed, Oct 04, 2023 at 08:30:21AM -0500, Rob Herring wrote:
> On Tue, Oct 03, 2023 at 09:52:13AM +0530, shravan chippa wrote:
> > From: Shravan Chippa <shravan.chippa@microchip.com>
> > 
> > Add new compatible name microchip,mpfs-pdma to support
> > out of order dma transfers
> > 
> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > ---
> >  .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
> >  1 file changed, 8 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > index a1af0b906365..974467c4bacb 100644
> > --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > @@ -27,10 +27,14 @@ allOf:
> >  
> >  properties:
> >    compatible:
> > -    items:
> > -      - enum:
> > -          - sifive,fu540-c000-pdma
> > -      - const: sifive,pdma0
> > +    oneOf:
> > +      - items:
> > +          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
> > +          - const: sifive,fu540-c000-pdma # Sifive in-order DMA transfer

IIRC I asked for the comments here to be removed on the previous
version, and my r-b was conditional on that.
The device specific compatible has merit outside of the ordering, which
may just be a software policy decision.

> This doesn't really make sense. microchip,mpfs-pdma is compatible with 
> sifive,fu540-c000-pdma and sifive,fu540-c000-pdma is compatible with 
> sifive,pdma0, but microchip,mpfs-pdma is not compatible with 
> sifive,pdma0? (Or replace "compatible with" with "a superset of")

TBH, I am not sure why it was done this way. Probably because the driver
contains both sifive,pdma0 and sifive,fu540-c000-pdma. Doing
compatible = "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0";
thing would be fine.

> Any fallback is only useful if an OS only understanding the fallback 
> will work with the h/w. Does this h/w work without the driver changes?

Yes. 
I've been hoping that someone from SiFive would come along, and in
response to this patchset, tell us _why_ the driver does not make use of
out-of-order transfers to begin with.

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 2411 bytes --]

On Wed, Oct 04, 2023 at 08:30:21AM -0500, Rob Herring wrote:
> On Tue, Oct 03, 2023 at 09:52:13AM +0530, shravan chippa wrote:
> > From: Shravan Chippa <shravan.chippa@microchip.com>
> > 
> > Add new compatible name microchip,mpfs-pdma to support
> > out of order dma transfers
> > 
> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > ---
> >  .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
> >  1 file changed, 8 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > index a1af0b906365..974467c4bacb 100644
> > --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > @@ -27,10 +27,14 @@ allOf:
> >  
> >  properties:
> >    compatible:
> > -    items:
> > -      - enum:
> > -          - sifive,fu540-c000-pdma
> > -      - const: sifive,pdma0
> > +    oneOf:
> > +      - items:
> > +          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
> > +          - const: sifive,fu540-c000-pdma # Sifive in-order DMA transfer

IIRC I asked for the comments here to be removed on the previous
version, and my r-b was conditional on that.
The device specific compatible has merit outside of the ordering, which
may just be a software policy decision.

> This doesn't really make sense. microchip,mpfs-pdma is compatible with 
> sifive,fu540-c000-pdma and sifive,fu540-c000-pdma is compatible with 
> sifive,pdma0, but microchip,mpfs-pdma is not compatible with 
> sifive,pdma0? (Or replace "compatible with" with "a superset of")

TBH, I am not sure why it was done this way. Probably because the driver
contains both sifive,pdma0 and sifive,fu540-c000-pdma. Doing
compatible = "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0";
thing would be fine.

> Any fallback is only useful if an OS only understanding the fallback 
> will work with the h/w. Does this h/w work without the driver changes?

Yes. 
I've been hoping that someone from SiFive would come along, and in
response to this patchset, tell us _why_ the driver does not make use of
out-of-order transfers to begin with.

Thanks,
Conor.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

RE: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Shravan.Chippa]

Hi,

> -----Original Message-----
> From: Conor Dooley <conor@kernel.org>
> Sent: Thursday, October 5, 2023 4:24 PM
> To: Rob Herring <robh@kernel.org>
> Cc: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>;
> green.wan@sifive.com; vkoul@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> palmer@dabbelt.com; paul.walmsley@sifive.com; conor+dt@kernel.org;
> dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-
> riscv@lists.infradead.org; linux-kernel@vger.kernel.org; Nagasuresh Relli - I67208
> <Nagasuresh.Relli@microchip.com>; Praveen Kumar - I30718
> <Praveen.Kumar@microchip.com>; Conor Dooley - M52691
> <Conor.Dooley@microchip.com>
> Subject: Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible
> name
> 
> On Wed, Oct 04, 2023 at 08:30:21AM -0500, Rob Herring wrote:
> > On Tue, Oct 03, 2023 at 09:52:13AM +0530, shravan chippa wrote:
> > > From: Shravan Chippa <shravan.chippa@microchip.com>
> > >
> > > Add new compatible name microchip,mpfs-pdma to support out of order
> > > dma transfers
> > >
> > > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > > ---
> > >  .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
> > >  1 file changed, 8 insertions(+), 4 deletions(-)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > index a1af0b906365..974467c4bacb 100644
> > > ---
> > > a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.y
> > > +++ aml
> > > @@ -27,10 +27,14 @@ allOf:
> > >
> > >  properties:
> > >    compatible:
> > > -    items:
> > > -      - enum:
> > > -          - sifive,fu540-c000-pdma
> > > -      - const: sifive,pdma0
> > > +    oneOf:
> > > +      - items:
> > > +          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
> > > +          - const: sifive,fu540-c000-pdma # Sifive in-order DMA
> > > + transfer
> 
> IIRC I asked for the comments here to be removed on the previous version, and
> my r-b was conditional on that.
> The device specific compatible has merit outside of the ordering, which may just
> be a software policy decision.
> 
> > This doesn't really make sense. microchip,mpfs-pdma is compatible with
> > sifive,fu540-c000-pdma and sifive,fu540-c000-pdma is compatible with
> > sifive,pdma0, but microchip,mpfs-pdma is not compatible with
> > sifive,pdma0? (Or replace "compatible with" with "a superset of")
> 
> TBH, I am not sure why it was done this way. Probably because the driver
> contains both sifive,pdma0 and sifive,fu540-c000-pdma. Doing compatible =
> "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0"; thing would
> be fine.
> 
> > Any fallback is only useful if an OS only understanding the fallback
> > will work with the h/w. Does this h/w work without the driver changes?
> 
> Yes.
> I've been hoping that someone from SiFive would come along, and in response to
> this patchset, tell us _why_ the driver does not make use of out-of-order transfers
> to begin with.
> 

I am also expecting a replay someone from SiFive
The out-of-order should work with other RISC-V platforms also.

I will try to send V3 with the below changes (just adding a new compatible name)

****************************
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -29,6 +29,7 @@ properties:
   compatible:
     items:
       - enum:
+          - microchip,mpfs-pdma
           - sifive,fu540-c000-pdma
       - const: sifive,pdma0
     description:
***************************

Device tree patch
*****************************
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -221,7 +221,7 @@ plic: interrupt-controller@c000000 {
                };
                pdma: dma-controller@3000000 {
-                       compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+                       compatible = "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0";
                        reg = <0x0 0x3000000 0x0 0x8000>;
                        interrupt-parent = <&plic>;
                        interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
***************************

Thanks,
Shravan

> Thanks,
> Conor.

RE: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Shravan.Chippa]

Hi,

> -----Original Message-----
> From: Conor Dooley <conor@kernel.org>
> Sent: Thursday, October 5, 2023 4:24 PM
> To: Rob Herring <robh@kernel.org>
> Cc: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>;
> green.wan@sifive.com; vkoul@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> palmer@dabbelt.com; paul.walmsley@sifive.com; conor+dt@kernel.org;
> dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-
> riscv@lists.infradead.org; linux-kernel@vger.kernel.org; Nagasuresh Relli - I67208
> <Nagasuresh.Relli@microchip.com>; Praveen Kumar - I30718
> <Praveen.Kumar@microchip.com>; Conor Dooley - M52691
> <Conor.Dooley@microchip.com>
> Subject: Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible
> name
> 
> On Wed, Oct 04, 2023 at 08:30:21AM -0500, Rob Herring wrote:
> > On Tue, Oct 03, 2023 at 09:52:13AM +0530, shravan chippa wrote:
> > > From: Shravan Chippa <shravan.chippa@microchip.com>
> > >
> > > Add new compatible name microchip,mpfs-pdma to support out of order
> > > dma transfers
> > >
> > > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > > ---
> > >  .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
> > >  1 file changed, 8 insertions(+), 4 deletions(-)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > index a1af0b906365..974467c4bacb 100644
> > > ---
> > > a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.y
> > > +++ aml
> > > @@ -27,10 +27,14 @@ allOf:
> > >
> > >  properties:
> > >    compatible:
> > > -    items:
> > > -      - enum:
> > > -          - sifive,fu540-c000-pdma
> > > -      - const: sifive,pdma0
> > > +    oneOf:
> > > +      - items:
> > > +          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
> > > +          - const: sifive,fu540-c000-pdma # Sifive in-order DMA
> > > + transfer
> 
> IIRC I asked for the comments here to be removed on the previous version, and
> my r-b was conditional on that.
> The device specific compatible has merit outside of the ordering, which may just
> be a software policy decision.
> 
> > This doesn't really make sense. microchip,mpfs-pdma is compatible with
> > sifive,fu540-c000-pdma and sifive,fu540-c000-pdma is compatible with
> > sifive,pdma0, but microchip,mpfs-pdma is not compatible with
> > sifive,pdma0? (Or replace "compatible with" with "a superset of")
> 
> TBH, I am not sure why it was done this way. Probably because the driver
> contains both sifive,pdma0 and sifive,fu540-c000-pdma. Doing compatible =
> "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0"; thing would
> be fine.
> 
> > Any fallback is only useful if an OS only understanding the fallback
> > will work with the h/w. Does this h/w work without the driver changes?
> 
> Yes.
> I've been hoping that someone from SiFive would come along, and in response to
> this patchset, tell us _why_ the driver does not make use of out-of-order transfers
> to begin with.
> 

I am also expecting a replay someone from SiFive
The out-of-order should work with other RISC-V platforms also.

I will try to send V3 with the below changes (just adding a new compatible name)

****************************
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -29,6 +29,7 @@ properties:
   compatible:
     items:
       - enum:
+          - microchip,mpfs-pdma
           - sifive,fu540-c000-pdma
       - const: sifive,pdma0
     description:
***************************

Device tree patch
*****************************
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -221,7 +221,7 @@ plic: interrupt-controller@c000000 {
                };
                pdma: dma-controller@3000000 {
-                       compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+                       compatible = "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0";
                        reg = <0x0 0x3000000 0x0 0x8000>;
                        interrupt-parent = <&plic>;
                        interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
***************************

Thanks,
Shravan

> Thanks,
> Conor.

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 5007 bytes --]

On Thu, Oct 12, 2023 at 09:22:17AM +0000, Shravan.Chippa@microchip.com wrote:
> Hi,
> 
> > -----Original Message-----
> > From: Conor Dooley <conor@kernel.org>
> > Sent: Thursday, October 5, 2023 4:24 PM
> > To: Rob Herring <robh@kernel.org>
> > Cc: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>;
> > green.wan@sifive.com; vkoul@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> > palmer@dabbelt.com; paul.walmsley@sifive.com; conor+dt@kernel.org;
> > dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-
> > riscv@lists.infradead.org; linux-kernel@vger.kernel.org; Nagasuresh Relli - I67208
> > <Nagasuresh.Relli@microchip.com>; Praveen Kumar - I30718
> > <Praveen.Kumar@microchip.com>; Conor Dooley - M52691
> > <Conor.Dooley@microchip.com>
> > Subject: Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible
> > name
> > 
> > On Wed, Oct 04, 2023 at 08:30:21AM -0500, Rob Herring wrote:
> > > On Tue, Oct 03, 2023 at 09:52:13AM +0530, shravan chippa wrote:
> > > > From: Shravan Chippa <shravan.chippa@microchip.com>
> > > >
> > > > Add new compatible name microchip,mpfs-pdma to support out of order
> > > > dma transfers
> > > >
> > > > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > > > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > > > ---
> > > >  .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
> > > >  1 file changed, 8 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > > b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > > index a1af0b906365..974467c4bacb 100644
> > > > ---
> > > > a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > > +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.y
> > > > +++ aml
> > > > @@ -27,10 +27,14 @@ allOf:
> > > >
> > > >  properties:
> > > >    compatible:
> > > > -    items:
> > > > -      - enum:
> > > > -          - sifive,fu540-c000-pdma
> > > > -      - const: sifive,pdma0
> > > > +    oneOf:
> > > > +      - items:
> > > > +          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
> > > > +          - const: sifive,fu540-c000-pdma # Sifive in-order DMA
> > > > + transfer
> > 
> > IIRC I asked for the comments here to be removed on the previous version, and
> > my r-b was conditional on that.
> > The device specific compatible has merit outside of the ordering, which may just
> > be a software policy decision.
> > 
> > > This doesn't really make sense. microchip,mpfs-pdma is compatible with
> > > sifive,fu540-c000-pdma and sifive,fu540-c000-pdma is compatible with
> > > sifive,pdma0, but microchip,mpfs-pdma is not compatible with
> > > sifive,pdma0? (Or replace "compatible with" with "a superset of")
> > 
> > TBH, I am not sure why it was done this way. Probably because the driver
> > contains both sifive,pdma0 and sifive,fu540-c000-pdma. Doing compatible =
> > "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0"; thing would
> > be fine.
> > 
> > > Any fallback is only useful if an OS only understanding the fallback
> > > will work with the h/w. Does this h/w work without the driver changes?
> > 
> > Yes.
> > I've been hoping that someone from SiFive would come along, and in response to
> > this patchset, tell us _why_ the driver does not make use of out-of-order transfers
> > to begin with.
> > 
> 
> I am also expecting a replay someone from SiFive
> The out-of-order should work with other RISC-V platforms also.
> 
> I will try to send V3 with the below changes (just adding a new compatible name)
> 
> ****************************
> --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> @@ -29,6 +29,7 @@ properties:
>    compatible:
>      items:
>        - enum:
> +          - microchip,mpfs-pdma
>            - sifive,fu540-c000-pdma
>        - const: sifive,pdma0
>      description:
> ***************************
> 
> Device tree patch
> *****************************
> --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
> @@ -221,7 +221,7 @@ plic: interrupt-controller@c000000 {
>                 };
>                 pdma: dma-controller@3000000 {
> -                       compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
> +                       compatible = "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0";

This is gonna produce dtbs_check complaints. Your binding change only
permits `compatible = "microchip,mpfs-pdma", "sifive,pdma0";`

Cheers,
Conor.

>                         reg = <0x0 0x3000000 0x0 0x8000>;
>                         interrupt-parent = <&plic>;
>                         interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
> ***************************

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 5007 bytes --]

On Thu, Oct 12, 2023 at 09:22:17AM +0000, Shravan.Chippa@microchip.com wrote:
> Hi,
> 
> > -----Original Message-----
> > From: Conor Dooley <conor@kernel.org>
> > Sent: Thursday, October 5, 2023 4:24 PM
> > To: Rob Herring <robh@kernel.org>
> > Cc: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>;
> > green.wan@sifive.com; vkoul@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> > palmer@dabbelt.com; paul.walmsley@sifive.com; conor+dt@kernel.org;
> > dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-
> > riscv@lists.infradead.org; linux-kernel@vger.kernel.org; Nagasuresh Relli - I67208
> > <Nagasuresh.Relli@microchip.com>; Praveen Kumar - I30718
> > <Praveen.Kumar@microchip.com>; Conor Dooley - M52691
> > <Conor.Dooley@microchip.com>
> > Subject: Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible
> > name
> > 
> > On Wed, Oct 04, 2023 at 08:30:21AM -0500, Rob Herring wrote:
> > > On Tue, Oct 03, 2023 at 09:52:13AM +0530, shravan chippa wrote:
> > > > From: Shravan Chippa <shravan.chippa@microchip.com>
> > > >
> > > > Add new compatible name microchip,mpfs-pdma to support out of order
> > > > dma transfers
> > > >
> > > > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > > > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > > > ---
> > > >  .../bindings/dma/sifive,fu540-c000-pdma.yaml         | 12 ++++++++----
> > > >  1 file changed, 8 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > > b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > > index a1af0b906365..974467c4bacb 100644
> > > > ---
> > > > a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > > > +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.y
> > > > +++ aml
> > > > @@ -27,10 +27,14 @@ allOf:
> > > >
> > > >  properties:
> > > >    compatible:
> > > > -    items:
> > > > -      - enum:
> > > > -          - sifive,fu540-c000-pdma
> > > > -      - const: sifive,pdma0
> > > > +    oneOf:
> > > > +      - items:
> > > > +          - const: microchip,mpfs-pdma # Microchip out of order DMA transfer
> > > > +          - const: sifive,fu540-c000-pdma # Sifive in-order DMA
> > > > + transfer
> > 
> > IIRC I asked for the comments here to be removed on the previous version, and
> > my r-b was conditional on that.
> > The device specific compatible has merit outside of the ordering, which may just
> > be a software policy decision.
> > 
> > > This doesn't really make sense. microchip,mpfs-pdma is compatible with
> > > sifive,fu540-c000-pdma and sifive,fu540-c000-pdma is compatible with
> > > sifive,pdma0, but microchip,mpfs-pdma is not compatible with
> > > sifive,pdma0? (Or replace "compatible with" with "a superset of")
> > 
> > TBH, I am not sure why it was done this way. Probably because the driver
> > contains both sifive,pdma0 and sifive,fu540-c000-pdma. Doing compatible =
> > "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0"; thing would
> > be fine.
> > 
> > > Any fallback is only useful if an OS only understanding the fallback
> > > will work with the h/w. Does this h/w work without the driver changes?
> > 
> > Yes.
> > I've been hoping that someone from SiFive would come along, and in response to
> > this patchset, tell us _why_ the driver does not make use of out-of-order transfers
> > to begin with.
> > 
> 
> I am also expecting a replay someone from SiFive
> The out-of-order should work with other RISC-V platforms also.
> 
> I will try to send V3 with the below changes (just adding a new compatible name)
> 
> ****************************
> --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> @@ -29,6 +29,7 @@ properties:
>    compatible:
>      items:
>        - enum:
> +          - microchip,mpfs-pdma
>            - sifive,fu540-c000-pdma
>        - const: sifive,pdma0
>      description:
> ***************************
> 
> Device tree patch
> *****************************
> --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
> @@ -221,7 +221,7 @@ plic: interrupt-controller@c000000 {
>                 };
>                 pdma: dma-controller@3000000 {
> -                       compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
> +                       compatible = "microchip,mpfs-pdma", "sifive,fu540-c000-pdma", "sifive,pdma0";

This is gonna produce dtbs_check complaints. Your binding change only
permits `compatible = "microchip,mpfs-pdma", "sifive,pdma0";`

Cheers,
Conor.

>                         reg = <0x0 0x3000000 0x0 0x8000>;
>                         interrupt-parent = <&plic>;
>                         interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
> ***************************

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Samuel Holland]

Hi Conor,

On 2023-10-05 5:54 AM, Conor Dooley wrote:
> On Wed, Oct 04, 2023 at 08:30:21AM -0500, Rob Herring wrote:
>> Any fallback is only useful if an OS only understanding the fallback 
>> will work with the h/w. Does this h/w work without the driver changes?
> 
> Yes. 
> I've been hoping that someone from SiFive would come along, and in
> response to this patchset, tell us _why_ the driver does not make use of
> out-of-order transfers to begin with.

I have raised this question internally. So far I have not seen anything to
suggest we need strictly-ordered transfers either, but I still need to confirm this.

Regards,
Samuel

Re: [PATCH v2 2/4] dt-bindings: dma: sf-pdma: add new compatible name

[Samuel Holland]

Hi Conor,

On 2023-10-05 5:54 AM, Conor Dooley wrote:
> On Wed, Oct 04, 2023 at 08:30:21AM -0500, Rob Herring wrote:
>> Any fallback is only useful if an OS only understanding the fallback 
>> will work with the h/w. Does this h/w work without the driver changes?
> 
> Yes. 
> I've been hoping that someone from SiFive would come along, and in
> response to this patchset, tell us _why_ the driver does not make use of
> out-of-order transfers to begin with.

I have raised this question internally. So far I have not seen anything to
suggest we need strictly-ordered transfers either, but I still need to confirm this.

Regards,
Samuel


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 1/4] dmaengine: sf-pdma: Support of_dma_controller_register()

[Samuel Holland]

Hi,

On 2023-10-02 11:22 PM, shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
> 
> Update sf-pdma driver to adopt generic DMA device tree bindings.
> It calls of_dma_controller_register() with sf-pdma specific
> of_dma_xlate to get the generic DMA device tree helper support
> and the DMA clients can look up the sf-pdma controller using
> standard APIs.
> 
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  drivers/dma/sf-pdma/sf-pdma.c | 44 +++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
> index d1c6956af452..06a0912a12a1 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.c
> +++ b/drivers/dma/sf-pdma/sf-pdma.c
> @@ -20,6 +20,7 @@
>  #include <linux/mod_devicetable.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
> +#include <linux/of_dma.h>
>  #include <linux/slab.h>
>  
>  #include "sf-pdma.h"
> @@ -490,6 +491,33 @@ static void sf_pdma_setup_chans(struct sf_pdma *pdma)
>  	}
>  }
>  
> +static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
> +					 struct of_dma *ofdma)
> +{
> +	struct sf_pdma *pdma = ofdma->of_dma_data;
> +	struct device *dev = pdma->dma_dev.dev;
> +	struct sf_pdma_chan  *chan;
> +	struct dma_chan *c;
> +	u32 channel_id;
> +
> +	if (dma_spec->args_count != 1) {
> +		dev_err(dev, "Bad number of cells\n");
> +		return NULL;
> +	}
> +
> +	channel_id = dma_spec->args[0];
> +
> +	chan = &pdma->chans[channel_id];
> +
> +	c = dma_get_slave_channel(&chan->vchan.chan);

This does not look right to me. All of the channels in the controller are
identical and support arbitrary addresses, so there is no need to use a specific
physical channel. And unless Microchip has added something on top, the only way
to trigger a transfer is through the MMIO interface, so there is no request ID
to differentiate virtual channels either.

So it seems to me that #dma-cells should really be 0, and this function should
just call dma_get_any_slave_channel().

Regards,
Samuel

> +	if (!c) {
> +		dev_err(dev, "No more channels available\n");
> +		return NULL;
> +	}
> +
> +	return c;
> +}
> +
>  static int sf_pdma_probe(struct platform_device *pdev)
>  {
>  	struct sf_pdma *pdma;
> @@ -563,7 +591,20 @@ static int sf_pdma_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	ret = of_dma_controller_register(pdev->dev.of_node,
> +					 sf_pdma_of_xlate, pdma);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +			"Can't register SiFive Platform OF_DMA. (%d)\n", ret);
> +		goto err_unregister;
> +	}
> +
>  	return 0;
> +
> +err_unregister:
> +	dma_async_device_unregister(&pdma->dma_dev);
> +
> +	return ret;
>  }
>  
>  static int sf_pdma_remove(struct platform_device *pdev)
> @@ -583,6 +624,9 @@ static int sf_pdma_remove(struct platform_device *pdev)
>  		tasklet_kill(&ch->err_tasklet);
>  	}
>  
> +	if (pdev->dev.of_node)
> +		of_dma_controller_free(pdev->dev.of_node);
> +
>  	dma_async_device_unregister(&pdma->dma_dev);
>  
>  	return 0;

Re: [PATCH v2 1/4] dmaengine: sf-pdma: Support of_dma_controller_register()

[Samuel Holland]

Hi,

On 2023-10-02 11:22 PM, shravan chippa wrote:
> From: Shravan Chippa <shravan.chippa@microchip.com>
> 
> Update sf-pdma driver to adopt generic DMA device tree bindings.
> It calls of_dma_controller_register() with sf-pdma specific
> of_dma_xlate to get the generic DMA device tree helper support
> and the DMA clients can look up the sf-pdma controller using
> standard APIs.
> 
> Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> ---
>  drivers/dma/sf-pdma/sf-pdma.c | 44 +++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
> index d1c6956af452..06a0912a12a1 100644
> --- a/drivers/dma/sf-pdma/sf-pdma.c
> +++ b/drivers/dma/sf-pdma/sf-pdma.c
> @@ -20,6 +20,7 @@
>  #include <linux/mod_devicetable.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
> +#include <linux/of_dma.h>
>  #include <linux/slab.h>
>  
>  #include "sf-pdma.h"
> @@ -490,6 +491,33 @@ static void sf_pdma_setup_chans(struct sf_pdma *pdma)
>  	}
>  }
>  
> +static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args *dma_spec,
> +					 struct of_dma *ofdma)
> +{
> +	struct sf_pdma *pdma = ofdma->of_dma_data;
> +	struct device *dev = pdma->dma_dev.dev;
> +	struct sf_pdma_chan  *chan;
> +	struct dma_chan *c;
> +	u32 channel_id;
> +
> +	if (dma_spec->args_count != 1) {
> +		dev_err(dev, "Bad number of cells\n");
> +		return NULL;
> +	}
> +
> +	channel_id = dma_spec->args[0];
> +
> +	chan = &pdma->chans[channel_id];
> +
> +	c = dma_get_slave_channel(&chan->vchan.chan);

This does not look right to me. All of the channels in the controller are
identical and support arbitrary addresses, so there is no need to use a specific
physical channel. And unless Microchip has added something on top, the only way
to trigger a transfer is through the MMIO interface, so there is no request ID
to differentiate virtual channels either.

So it seems to me that #dma-cells should really be 0, and this function should
just call dma_get_any_slave_channel().

Regards,
Samuel

> +	if (!c) {
> +		dev_err(dev, "No more channels available\n");
> +		return NULL;
> +	}
> +
> +	return c;
> +}
> +
>  static int sf_pdma_probe(struct platform_device *pdev)
>  {
>  	struct sf_pdma *pdma;
> @@ -563,7 +591,20 @@ static int sf_pdma_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	ret = of_dma_controller_register(pdev->dev.of_node,
> +					 sf_pdma_of_xlate, pdma);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +			"Can't register SiFive Platform OF_DMA. (%d)\n", ret);
> +		goto err_unregister;
> +	}
> +
>  	return 0;
> +
> +err_unregister:
> +	dma_async_device_unregister(&pdma->dma_dev);
> +
> +	return ret;
>  }
>  
>  static int sf_pdma_remove(struct platform_device *pdev)
> @@ -583,6 +624,9 @@ static int sf_pdma_remove(struct platform_device *pdev)
>  		tasklet_kill(&ch->err_tasklet);
>  	}
>  
> +	if (pdev->dev.of_node)
> +		of_dma_controller_free(pdev->dev.of_node);
> +
>  	dma_async_device_unregister(&pdma->dma_dev);
>  
>  	return 0;


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

RE: [PATCH v2 1/4] dmaengine: sf-pdma: Support of_dma_controller_register()

[Shravan.Chippa]

Hi,

> -----Original Message-----
> From: Samuel Holland <samuel.holland@sifive.com>
> Sent: Wednesday, October 18, 2023 12:03 AM
> To: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>;
> green.wan@sifive.com; vkoul@kernel.org; robh+dt@kernel.org;
> krzysztof.kozlowski+dt@linaro.org; palmer@dabbelt.com;
> paul.walmsley@sifive.com; conor+dt@kernel.org
> Cc: dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-
> riscv@lists.infradead.org; linux-kernel@vger.kernel.org; Nagasuresh Relli -
> I67208 <Nagasuresh.Relli@microchip.com>; Praveen Kumar - I30718
> <Praveen.Kumar@microchip.com>
> Subject: Re: [PATCH v2 1/4] dmaengine: sf-pdma: Support
> of_dma_controller_register()
> 
> [You don't often get email from samuel.holland@sifive.com. Learn why this is
> important at https://aka.ms/LearnAboutSenderIdentification ]
> 
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> 
> Hi,
> 
> On 2023-10-02 11:22 PM, shravan chippa wrote:
> > From: Shravan Chippa <shravan.chippa@microchip.com>
> >
> > Update sf-pdma driver to adopt generic DMA device tree bindings.
> > It calls of_dma_controller_register() with sf-pdma specific
> > of_dma_xlate to get the generic DMA device tree helper support and the
> > DMA clients can look up the sf-pdma controller using standard APIs.
> >
> > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > ---
> >  drivers/dma/sf-pdma/sf-pdma.c | 44
> > +++++++++++++++++++++++++++++++++++
> >  1 file changed, 44 insertions(+)
> >
> > diff --git a/drivers/dma/sf-pdma/sf-pdma.c
> > b/drivers/dma/sf-pdma/sf-pdma.c index d1c6956af452..06a0912a12a1
> > 100644
> > --- a/drivers/dma/sf-pdma/sf-pdma.c
> > +++ b/drivers/dma/sf-pdma/sf-pdma.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/mod_devicetable.h>
> >  #include <linux/dma-mapping.h>
> >  #include <linux/of.h>
> > +#include <linux/of_dma.h>
> >  #include <linux/slab.h>
> >
> >  #include "sf-pdma.h"
> > @@ -490,6 +491,33 @@ static void sf_pdma_setup_chans(struct sf_pdma
> *pdma)
> >       }
> >  }
> >
> > +static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args
> *dma_spec,
> > +                                      struct of_dma *ofdma) {
> > +     struct sf_pdma *pdma = ofdma->of_dma_data;
> > +     struct device *dev = pdma->dma_dev.dev;
> > +     struct sf_pdma_chan  *chan;
> > +     struct dma_chan *c;
> > +     u32 channel_id;
> > +
> > +     if (dma_spec->args_count != 1) {
> > +             dev_err(dev, "Bad number of cells\n");
> > +             return NULL;
> > +     }
> > +
> > +     channel_id = dma_spec->args[0];
> > +
> > +     chan = &pdma->chans[channel_id];
> > +
> > +     c = dma_get_slave_channel(&chan->vchan.chan);
> 
> This does not look right to me. All of the channels in the controller are identical
> and support arbitrary addresses, so there is no need to use a specific physical
> channel. And unless Microchip has added something on top, the only way to
> trigger a transfer is through the MMIO interface, so there is no request ID to
> differentiate virtual channels either.
> 
> So it seems to me that #dma-cells should really be 0, and this function should
> just call dma_get_any_slave_channel().
> 

Thanks for your comment, yes all the channels are identical.

I have tested with dma_get_any_slave_channel()
it is not working.

dma_get_any_slave_channel() function searching for the DMA channel which has "DMA_SLAVE" capabilities.
But sf-pdma has only "DMA_MEMCPY" capabilities. 

*****************************
struct dma_chan *dma_get_any_slave_channel(struct dma_device *device)
{
        dma_cap_zero(mask);
        dma_cap_set(DMA_SLAVE, mask);
        chan = find_candidate(device, &mask, NULL, NULL);
}
******************************

So "dma_request_chan()" function throws an error like "sf-pdma 3000000.dma-controller: No more channels available"


Thanks,
Shravan.

> Regards,
> Samuel
> 
> > +     if (!c) {
> > +             dev_err(dev, "No more channels available\n");
> > +             return NULL;
> > +     }
> > +
> > +     return c;
> > +}
> > +
> >  static int sf_pdma_probe(struct platform_device *pdev)  {
> >       struct sf_pdma *pdma;
> > @@ -563,7 +591,20 @@ static int sf_pdma_probe(struct platform_device
> *pdev)
> >               return ret;
> >       }
> >
> > +     ret = of_dma_controller_register(pdev->dev.of_node,
> > +                                      sf_pdma_of_xlate, pdma);
> > +     if (ret < 0) {
> > +             dev_err(&pdev->dev,
> > +                     "Can't register SiFive Platform OF_DMA. (%d)\n", ret);
> > +             goto err_unregister;
> > +     }
> > +
> >       return 0;
> > +
> > +err_unregister:
> > +     dma_async_device_unregister(&pdma->dma_dev);
> > +
> > +     return ret;
> >  }
> >
> >  static int sf_pdma_remove(struct platform_device *pdev) @@ -583,6
> > +624,9 @@ static int sf_pdma_remove(struct platform_device *pdev)
> >               tasklet_kill(&ch->err_tasklet);
> >       }
> >
> > +     if (pdev->dev.of_node)
> > +             of_dma_controller_free(pdev->dev.of_node);
> > +
> >       dma_async_device_unregister(&pdma->dma_dev);
> >
> >       return 0;

RE: [PATCH v2 1/4] dmaengine: sf-pdma: Support of_dma_controller_register()

[Shravan.Chippa]

Hi,

> -----Original Message-----
> From: Samuel Holland <samuel.holland@sifive.com>
> Sent: Wednesday, October 18, 2023 12:03 AM
> To: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>;
> green.wan@sifive.com; vkoul@kernel.org; robh+dt@kernel.org;
> krzysztof.kozlowski+dt@linaro.org; palmer@dabbelt.com;
> paul.walmsley@sifive.com; conor+dt@kernel.org
> Cc: dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-
> riscv@lists.infradead.org; linux-kernel@vger.kernel.org; Nagasuresh Relli -
> I67208 <Nagasuresh.Relli@microchip.com>; Praveen Kumar - I30718
> <Praveen.Kumar@microchip.com>
> Subject: Re: [PATCH v2 1/4] dmaengine: sf-pdma: Support
> of_dma_controller_register()
> 
> [You don't often get email from samuel.holland@sifive.com. Learn why this is
> important at https://aka.ms/LearnAboutSenderIdentification ]
> 
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> 
> Hi,
> 
> On 2023-10-02 11:22 PM, shravan chippa wrote:
> > From: Shravan Chippa <shravan.chippa@microchip.com>
> >
> > Update sf-pdma driver to adopt generic DMA device tree bindings.
> > It calls of_dma_controller_register() with sf-pdma specific
> > of_dma_xlate to get the generic DMA device tree helper support and the
> > DMA clients can look up the sf-pdma controller using standard APIs.
> >
> > Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
> > ---
> >  drivers/dma/sf-pdma/sf-pdma.c | 44
> > +++++++++++++++++++++++++++++++++++
> >  1 file changed, 44 insertions(+)
> >
> > diff --git a/drivers/dma/sf-pdma/sf-pdma.c
> > b/drivers/dma/sf-pdma/sf-pdma.c index d1c6956af452..06a0912a12a1
> > 100644
> > --- a/drivers/dma/sf-pdma/sf-pdma.c
> > +++ b/drivers/dma/sf-pdma/sf-pdma.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/mod_devicetable.h>
> >  #include <linux/dma-mapping.h>
> >  #include <linux/of.h>
> > +#include <linux/of_dma.h>
> >  #include <linux/slab.h>
> >
> >  #include "sf-pdma.h"
> > @@ -490,6 +491,33 @@ static void sf_pdma_setup_chans(struct sf_pdma
> *pdma)
> >       }
> >  }
> >
> > +static struct dma_chan *sf_pdma_of_xlate(struct of_phandle_args
> *dma_spec,
> > +                                      struct of_dma *ofdma) {
> > +     struct sf_pdma *pdma = ofdma->of_dma_data;
> > +     struct device *dev = pdma->dma_dev.dev;
> > +     struct sf_pdma_chan  *chan;
> > +     struct dma_chan *c;
> > +     u32 channel_id;
> > +
> > +     if (dma_spec->args_count != 1) {
> > +             dev_err(dev, "Bad number of cells\n");
> > +             return NULL;
> > +     }
> > +
> > +     channel_id = dma_spec->args[0];
> > +
> > +     chan = &pdma->chans[channel_id];
> > +
> > +     c = dma_get_slave_channel(&chan->vchan.chan);
> 
> This does not look right to me. All of the channels in the controller are identical
> and support arbitrary addresses, so there is no need to use a specific physical
> channel. And unless Microchip has added something on top, the only way to
> trigger a transfer is through the MMIO interface, so there is no request ID to
> differentiate virtual channels either.
> 
> So it seems to me that #dma-cells should really be 0, and this function should
> just call dma_get_any_slave_channel().
> 

Thanks for your comment, yes all the channels are identical.

I have tested with dma_get_any_slave_channel()
it is not working.

dma_get_any_slave_channel() function searching for the DMA channel which has "DMA_SLAVE" capabilities.
But sf-pdma has only "DMA_MEMCPY" capabilities. 

*****************************
struct dma_chan *dma_get_any_slave_channel(struct dma_device *device)
{
        dma_cap_zero(mask);
        dma_cap_set(DMA_SLAVE, mask);
        chan = find_candidate(device, &mask, NULL, NULL);
}
******************************

So "dma_request_chan()" function throws an error like "sf-pdma 3000000.dma-controller: No more channels available"


Thanks,
Shravan.

> Regards,
> Samuel
> 
> > +     if (!c) {
> > +             dev_err(dev, "No more channels available\n");
> > +             return NULL;
> > +     }
> > +
> > +     return c;
> > +}
> > +
> >  static int sf_pdma_probe(struct platform_device *pdev)  {
> >       struct sf_pdma *pdma;
> > @@ -563,7 +591,20 @@ static int sf_pdma_probe(struct platform_device
> *pdev)
> >               return ret;
> >       }
> >
> > +     ret = of_dma_controller_register(pdev->dev.of_node,
> > +                                      sf_pdma_of_xlate, pdma);
> > +     if (ret < 0) {
> > +             dev_err(&pdev->dev,
> > +                     "Can't register SiFive Platform OF_DMA. (%d)\n", ret);
> > +             goto err_unregister;
> > +     }
> > +
> >       return 0;
> > +
> > +err_unregister:
> > +     dma_async_device_unregister(&pdma->dma_dev);
> > +
> > +     return ret;
> >  }
> >
> >  static int sf_pdma_remove(struct platform_device *pdev) @@ -583,6
> > +624,9 @@ static int sf_pdma_remove(struct platform_device *pdev)
> >               tasklet_kill(&ch->err_tasklet);
> >       }
> >
> > +     if (pdev->dev.of_node)
> > +             of_dma_controller_free(pdev->dev.of_node);
> > +
> >       dma_async_device_unregister(&pdma->dma_dev);
> >
> >       return 0;

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv