All of lore.kernel.org
 help / color / mirror / Atom feed
From: Elliot Berman <quic_eberman@quicinc.com>
To: Alex Elder <elder@linaro.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Murali Nalajal <quic_mnalajal@quicinc.com>,
	Trilok Soni <quic_tsoni@quicinc.com>,
	Srivatsa Vaddagiri <quic_svaddagi@quicinc.com>,
	Carl van Schaik <quic_cvanscha@quicinc.com>,
	Philip Derrin <quic_pderrin@quicinc.com>,
	Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	"Fuad Tabba" <tabba@google.com>,
	Sean Christopherson <seanjc@google.com>,
	"Andrew Morton" <akpm@linux-foundation.org>
Cc: <linux-arm-msm@vger.kernel.org>, <linux-doc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <linux-mm@kvack.org>,
	Elliot Berman <quic_eberman@quicinc.com>
Subject: [PATCH v17 04/35] virt: gunyah: Add hypercalls to identify Gunyah
Date: Thu, 22 Feb 2024 15:16:27 -0800	[thread overview]
Message-ID: <20240222-gunyah-v17-4-1e9da6763d38@quicinc.com> (raw)
In-Reply-To: <20240222-gunyah-v17-0-1e9da6763d38@quicinc.com>

Add hypercalls to identify when Linux is running in a virtual machine
under Gunyah.

There are two calls to help identify Gunyah:

1. gh_hypercall_get_uid() returns a UID when running under a Gunyah
   hypervisor.
2. gh_hypercall_hyp_identify() returns build information and a set of
   feature flags that are supported by Gunyah.

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 arch/arm64/Kbuild                    |  1 +
 arch/arm64/gunyah/Makefile           |  3 ++
 arch/arm64/gunyah/gunyah_hypercall.c | 62 ++++++++++++++++++++++++++++++++++++
 drivers/virt/Kconfig                 |  2 ++
 drivers/virt/gunyah/Kconfig          | 12 +++++++
 include/linux/gunyah.h               | 38 ++++++++++++++++++++++
 6 files changed, 118 insertions(+)

diff --git a/arch/arm64/Kbuild b/arch/arm64/Kbuild
index 5bfbf7d79c99b..e4847ba0e3c95 100644
--- a/arch/arm64/Kbuild
+++ b/arch/arm64/Kbuild
@@ -3,6 +3,7 @@ obj-y			+= kernel/ mm/ net/
 obj-$(CONFIG_KVM)	+= kvm/
 obj-$(CONFIG_XEN)	+= xen/
 obj-$(subst m,y,$(CONFIG_HYPERV))	+= hyperv/
+obj-$(CONFIG_GUNYAH)	+= gunyah/
 obj-$(CONFIG_CRYPTO)	+= crypto/
 
 # for cleaning
diff --git a/arch/arm64/gunyah/Makefile b/arch/arm64/gunyah/Makefile
new file mode 100644
index 0000000000000..84f1e38cafb1e
--- /dev/null
+++ b/arch/arm64/gunyah/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_GUNYAH) += gunyah_hypercall.o
diff --git a/arch/arm64/gunyah/gunyah_hypercall.c b/arch/arm64/gunyah/gunyah_hypercall.c
new file mode 100644
index 0000000000000..d44663334f381
--- /dev/null
+++ b/arch/arm64/gunyah/gunyah_hypercall.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/module.h>
+#include <linux/gunyah.h>
+#include <linux/uuid.h>
+
+/* {c1d58fcd-a453-5fdb-9265-ce36673d5f14} */
+static const uuid_t GUNYAH_UUID = UUID_INIT(0xc1d58fcd, 0xa453, 0x5fdb, 0x92,
+					    0x65, 0xce, 0x36, 0x67, 0x3d, 0x5f,
+					    0x14);
+
+bool arch_is_gunyah_guest(void)
+{
+	struct arm_smccc_res res;
+	uuid_t uuid;
+	u32 *up;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID, &res);
+
+	up = (u32 *)&uuid.b[0];
+	up[0] = lower_32_bits(res.a0);
+	up[1] = lower_32_bits(res.a1);
+	up[2] = lower_32_bits(res.a2);
+	up[3] = lower_32_bits(res.a3);
+
+	return uuid_equal(&uuid, &GUNYAH_UUID);
+}
+EXPORT_SYMBOL_GPL(arch_is_gunyah_guest);
+
+#define GUNYAH_HYPERCALL(fn)                                      \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
+			   ARM_SMCCC_OWNER_VENDOR_HYP, fn)
+
+/* clang-format off */
+#define GUNYAH_HYPERCALL_HYP_IDENTIFY		GUNYAH_HYPERCALL(0x8000)
+/* clang-format on */
+
+/**
+ * gunyah_hypercall_hyp_identify() - Returns build information and feature flags
+ *                               supported by Gunyah.
+ * @hyp_identity: filled by the hypercall with the API info and feature flags.
+ */
+void gunyah_hypercall_hyp_identify(
+	struct gunyah_hypercall_hyp_identify_resp *hyp_identity)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_hvc(GUNYAH_HYPERCALL_HYP_IDENTIFY, &res);
+
+	hyp_identity->api_info = res.a0;
+	hyp_identity->flags[0] = res.a1;
+	hyp_identity->flags[1] = res.a2;
+	hyp_identity->flags[2] = res.a3;
+}
+EXPORT_SYMBOL_GPL(gunyah_hypercall_hyp_identify);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Gunyah Hypervisor Hypercalls");
diff --git a/drivers/virt/Kconfig b/drivers/virt/Kconfig
index 40129b6f0eca4..172a6a12073c3 100644
--- a/drivers/virt/Kconfig
+++ b/drivers/virt/Kconfig
@@ -50,4 +50,6 @@ source "drivers/virt/acrn/Kconfig"
 
 source "drivers/virt/coco/Kconfig"
 
+source "drivers/virt/gunyah/Kconfig"
+
 endif
diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
new file mode 100644
index 0000000000000..6f4c85db80b52
--- /dev/null
+++ b/drivers/virt/gunyah/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config GUNYAH
+	tristate "Gunyah Virtualization drivers"
+	depends on ARM64
+	help
+	  The Gunyah drivers are the helper interfaces that run in a guest VM
+	  such as basic inter-VM IPC and signaling mechanisms, and higher level
+	  services such as memory/device sharing, IRQ sharing, and so on.
+
+	  Say Y/M here to enable the drivers needed to interact in a Gunyah
+	  virtual environment.
diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h
index 1eab631a49b6d..33bcbd22d39f7 100644
--- a/include/linux/gunyah.h
+++ b/include/linux/gunyah.h
@@ -6,9 +6,11 @@
 #ifndef _LINUX_GUNYAH_H
 #define _LINUX_GUNYAH_H
 
+#include <linux/bitfield.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/limits.h>
+#include <linux/types.h>
 
 /* Matches resource manager's resource types for VM_GET_HYP_RESOURCES RPC */
 enum gunyah_resource_type {
@@ -103,4 +105,40 @@ static inline int gunyah_error_remap(enum gunyah_error gunyah_error)
 	}
 }
 
+enum gunyah_api_feature {
+	/* clang-format off */
+	GUNYAH_FEATURE_DOORBELL		= 1,
+	GUNYAH_FEATURE_MSGQUEUE		= 2,
+	GUNYAH_FEATURE_VCPU		= 5,
+	GUNYAH_FEATURE_MEMEXTENT	= 6,
+	/* clang-format on */
+};
+
+bool arch_is_gunyah_guest(void);
+
+#define GUNYAH_API_V1 1
+
+/* Other bits reserved for future use and will be zero */
+/* clang-format off */
+#define GUNYAH_API_INFO_API_VERSION_MASK	GENMASK_ULL(13, 0)
+#define GUNYAH_API_INFO_BIG_ENDIAN		BIT_ULL(14)
+#define GUNYAH_API_INFO_IS_64BIT		BIT_ULL(15)
+#define GUNYAH_API_INFO_VARIANT_MASK 		GENMASK_ULL(63, 56)
+/* clang-format on */
+
+struct gunyah_hypercall_hyp_identify_resp {
+	u64 api_info;
+	u64 flags[3];
+};
+
+static inline u16
+gunyah_api_version(const struct gunyah_hypercall_hyp_identify_resp *gunyah_api)
+{
+	return FIELD_GET(GUNYAH_API_INFO_API_VERSION_MASK,
+			 gunyah_api->api_info);
+}
+
+void gunyah_hypercall_hyp_identify(
+	struct gunyah_hypercall_hyp_identify_resp *hyp_identity);
+
 #endif

-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Elliot Berman <quic_eberman@quicinc.com>
To: Alex Elder <elder@linaro.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Murali Nalajal <quic_mnalajal@quicinc.com>,
	Trilok Soni <quic_tsoni@quicinc.com>,
	Srivatsa Vaddagiri <quic_svaddagi@quicinc.com>,
	Carl van Schaik <quic_cvanscha@quicinc.com>,
	Philip Derrin <quic_pderrin@quicinc.com>,
	Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	"Fuad Tabba" <tabba@google.com>,
	Sean Christopherson <seanjc@google.com>,
	"Andrew Morton" <akpm@linux-foundation.org>
Cc: <linux-arm-msm@vger.kernel.org>, <linux-doc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <linux-mm@kvack.org>,
	Elliot Berman <quic_eberman@quicinc.com>
Subject: [PATCH v17 04/35] virt: gunyah: Add hypercalls to identify Gunyah
Date: Thu, 22 Feb 2024 15:16:27 -0800	[thread overview]
Message-ID: <20240222-gunyah-v17-4-1e9da6763d38@quicinc.com> (raw)
In-Reply-To: <20240222-gunyah-v17-0-1e9da6763d38@quicinc.com>

Add hypercalls to identify when Linux is running in a virtual machine
under Gunyah.

There are two calls to help identify Gunyah:

1. gh_hypercall_get_uid() returns a UID when running under a Gunyah
   hypervisor.
2. gh_hypercall_hyp_identify() returns build information and a set of
   feature flags that are supported by Gunyah.

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 arch/arm64/Kbuild                    |  1 +
 arch/arm64/gunyah/Makefile           |  3 ++
 arch/arm64/gunyah/gunyah_hypercall.c | 62 ++++++++++++++++++++++++++++++++++++
 drivers/virt/Kconfig                 |  2 ++
 drivers/virt/gunyah/Kconfig          | 12 +++++++
 include/linux/gunyah.h               | 38 ++++++++++++++++++++++
 6 files changed, 118 insertions(+)

diff --git a/arch/arm64/Kbuild b/arch/arm64/Kbuild
index 5bfbf7d79c99b..e4847ba0e3c95 100644
--- a/arch/arm64/Kbuild
+++ b/arch/arm64/Kbuild
@@ -3,6 +3,7 @@ obj-y			+= kernel/ mm/ net/
 obj-$(CONFIG_KVM)	+= kvm/
 obj-$(CONFIG_XEN)	+= xen/
 obj-$(subst m,y,$(CONFIG_HYPERV))	+= hyperv/
+obj-$(CONFIG_GUNYAH)	+= gunyah/
 obj-$(CONFIG_CRYPTO)	+= crypto/
 
 # for cleaning
diff --git a/arch/arm64/gunyah/Makefile b/arch/arm64/gunyah/Makefile
new file mode 100644
index 0000000000000..84f1e38cafb1e
--- /dev/null
+++ b/arch/arm64/gunyah/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_GUNYAH) += gunyah_hypercall.o
diff --git a/arch/arm64/gunyah/gunyah_hypercall.c b/arch/arm64/gunyah/gunyah_hypercall.c
new file mode 100644
index 0000000000000..d44663334f381
--- /dev/null
+++ b/arch/arm64/gunyah/gunyah_hypercall.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/module.h>
+#include <linux/gunyah.h>
+#include <linux/uuid.h>
+
+/* {c1d58fcd-a453-5fdb-9265-ce36673d5f14} */
+static const uuid_t GUNYAH_UUID = UUID_INIT(0xc1d58fcd, 0xa453, 0x5fdb, 0x92,
+					    0x65, 0xce, 0x36, 0x67, 0x3d, 0x5f,
+					    0x14);
+
+bool arch_is_gunyah_guest(void)
+{
+	struct arm_smccc_res res;
+	uuid_t uuid;
+	u32 *up;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID, &res);
+
+	up = (u32 *)&uuid.b[0];
+	up[0] = lower_32_bits(res.a0);
+	up[1] = lower_32_bits(res.a1);
+	up[2] = lower_32_bits(res.a2);
+	up[3] = lower_32_bits(res.a3);
+
+	return uuid_equal(&uuid, &GUNYAH_UUID);
+}
+EXPORT_SYMBOL_GPL(arch_is_gunyah_guest);
+
+#define GUNYAH_HYPERCALL(fn)                                      \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
+			   ARM_SMCCC_OWNER_VENDOR_HYP, fn)
+
+/* clang-format off */
+#define GUNYAH_HYPERCALL_HYP_IDENTIFY		GUNYAH_HYPERCALL(0x8000)
+/* clang-format on */
+
+/**
+ * gunyah_hypercall_hyp_identify() - Returns build information and feature flags
+ *                               supported by Gunyah.
+ * @hyp_identity: filled by the hypercall with the API info and feature flags.
+ */
+void gunyah_hypercall_hyp_identify(
+	struct gunyah_hypercall_hyp_identify_resp *hyp_identity)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_hvc(GUNYAH_HYPERCALL_HYP_IDENTIFY, &res);
+
+	hyp_identity->api_info = res.a0;
+	hyp_identity->flags[0] = res.a1;
+	hyp_identity->flags[1] = res.a2;
+	hyp_identity->flags[2] = res.a3;
+}
+EXPORT_SYMBOL_GPL(gunyah_hypercall_hyp_identify);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Gunyah Hypervisor Hypercalls");
diff --git a/drivers/virt/Kconfig b/drivers/virt/Kconfig
index 40129b6f0eca4..172a6a12073c3 100644
--- a/drivers/virt/Kconfig
+++ b/drivers/virt/Kconfig
@@ -50,4 +50,6 @@ source "drivers/virt/acrn/Kconfig"
 
 source "drivers/virt/coco/Kconfig"
 
+source "drivers/virt/gunyah/Kconfig"
+
 endif
diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
new file mode 100644
index 0000000000000..6f4c85db80b52
--- /dev/null
+++ b/drivers/virt/gunyah/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config GUNYAH
+	tristate "Gunyah Virtualization drivers"
+	depends on ARM64
+	help
+	  The Gunyah drivers are the helper interfaces that run in a guest VM
+	  such as basic inter-VM IPC and signaling mechanisms, and higher level
+	  services such as memory/device sharing, IRQ sharing, and so on.
+
+	  Say Y/M here to enable the drivers needed to interact in a Gunyah
+	  virtual environment.
diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h
index 1eab631a49b6d..33bcbd22d39f7 100644
--- a/include/linux/gunyah.h
+++ b/include/linux/gunyah.h
@@ -6,9 +6,11 @@
 #ifndef _LINUX_GUNYAH_H
 #define _LINUX_GUNYAH_H
 
+#include <linux/bitfield.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/limits.h>
+#include <linux/types.h>
 
 /* Matches resource manager's resource types for VM_GET_HYP_RESOURCES RPC */
 enum gunyah_resource_type {
@@ -103,4 +105,40 @@ static inline int gunyah_error_remap(enum gunyah_error gunyah_error)
 	}
 }
 
+enum gunyah_api_feature {
+	/* clang-format off */
+	GUNYAH_FEATURE_DOORBELL		= 1,
+	GUNYAH_FEATURE_MSGQUEUE		= 2,
+	GUNYAH_FEATURE_VCPU		= 5,
+	GUNYAH_FEATURE_MEMEXTENT	= 6,
+	/* clang-format on */
+};
+
+bool arch_is_gunyah_guest(void);
+
+#define GUNYAH_API_V1 1
+
+/* Other bits reserved for future use and will be zero */
+/* clang-format off */
+#define GUNYAH_API_INFO_API_VERSION_MASK	GENMASK_ULL(13, 0)
+#define GUNYAH_API_INFO_BIG_ENDIAN		BIT_ULL(14)
+#define GUNYAH_API_INFO_IS_64BIT		BIT_ULL(15)
+#define GUNYAH_API_INFO_VARIANT_MASK 		GENMASK_ULL(63, 56)
+/* clang-format on */
+
+struct gunyah_hypercall_hyp_identify_resp {
+	u64 api_info;
+	u64 flags[3];
+};
+
+static inline u16
+gunyah_api_version(const struct gunyah_hypercall_hyp_identify_resp *gunyah_api)
+{
+	return FIELD_GET(GUNYAH_API_INFO_API_VERSION_MASK,
+			 gunyah_api->api_info);
+}
+
+void gunyah_hypercall_hyp_identify(
+	struct gunyah_hypercall_hyp_identify_resp *hyp_identity);
+
 #endif

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2024-02-22 23:17 UTC|newest]

Thread overview: 150+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-22 23:16 [PATCH v17 00/35] Drivers for Gunyah hypervisor Elliot Berman
2024-02-22 23:16 ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 01/35] docs: gunyah: Introduce Gunyah Hypervisor Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-05 10:53   ` Pavan Kondeti
2024-03-05 10:53     ` Pavan Kondeti
2024-03-07 15:37   ` Srivatsa Vaddagiri
2024-03-07 15:37     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 02/35] dt-bindings: Add binding for gunyah hypervisor Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 03/35] gunyah: Common types and error codes for Gunyah hypercalls Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` Elliot Berman [this message]
2024-02-22 23:16   ` [PATCH v17 04/35] virt: gunyah: Add hypercalls to identify Gunyah Elliot Berman
2024-02-22 23:16 ` [PATCH v17 05/35] virt: gunyah: Add hypervisor driver Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-23 21:10   ` Konrad Dybcio
2024-02-23 21:10     ` Konrad Dybcio
2024-02-23 22:58     ` Elliot Berman
2024-02-23 22:58       ` Elliot Berman
2024-02-23 23:46       ` Konrad Dybcio
2024-02-23 23:46         ` Konrad Dybcio
2024-03-07 15:38   ` Srivatsa Vaddagiri
2024-03-07 15:38     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 06/35] virt: gunyah: msgq: Add hypercalls to send and receive messages Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 07/35] gunyah: rsc_mgr: Add resource manager RPC core Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-07 15:38   ` Srivatsa Vaddagiri
2024-03-07 15:38     ` Srivatsa Vaddagiri
2024-03-07 16:41     ` Elliot Berman
2024-03-07 16:41       ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 08/35] gunyah: vm_mgr: Introduce basic VM Manager Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-07 15:39   ` Srivatsa Vaddagiri
2024-03-07 15:39     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 09/35] gunyah: rsc_mgr: Add VM lifecycle RPC Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-07 15:39   ` Srivatsa Vaddagiri
2024-03-07 15:39     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 10/35] gunyah: vm_mgr: Add VM start/stop Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-11  5:38   ` Srivatsa Vaddagiri
2024-03-11  5:38     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 11/35] virt: gunyah: Translate gh_rm_hyp_resource into gunyah_resource Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-11  5:39   ` Srivatsa Vaddagiri
2024-03-11  5:39     ` Srivatsa Vaddagiri
2024-03-11 17:19     ` Elliot Berman
2024-03-11 17:19       ` Elliot Berman
2024-04-05  3:10   ` Pavan Kondeti
2024-04-05  3:10     ` Pavan Kondeti
2024-04-05 15:18     ` Elliot Berman
2024-04-05 15:18       ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 12/35] virt: gunyah: Add resource tickets Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-11  5:38   ` Srivatsa Vaddagiri
2024-03-11  5:38     ` Srivatsa Vaddagiri
2024-03-11 17:13     ` Elliot Berman
2024-03-11 17:13       ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 13/35] gunyah: vm_mgr: Add framework for VM Functions Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-13  9:20   ` Srivatsa Vaddagiri
2024-03-13  9:20     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 14/35] virt: gunyah: Add hypercalls for running a vCPU Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-13  9:21   ` Srivatsa Vaddagiri
2024-03-13  9:21     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 15/35] virt: gunyah: Add proxy-scheduled vCPUs Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-13  9:21   ` Srivatsa Vaddagiri
2024-03-13  9:21     ` Srivatsa Vaddagiri
2024-04-24  9:39   ` Srivatsa Vaddagiri
2024-04-24  9:39     ` Srivatsa Vaddagiri
2024-04-24 17:01     ` Elliot Berman
2024-04-24 17:01       ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 16/35] gunyah: Add hypercalls for demand paging Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-13 15:35   ` Srivatsa Vaddagiri
2024-03-13 15:35     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 17/35] gunyah: rsc_mgr: Add memory parcel RPC Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-14 14:02   ` Srivatsa Vaddagiri
2024-03-14 14:02     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 18/35] mm/interval_tree: Export iter_first/iter_next Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 19/35] arch/mm: Export direct {un,}map functions Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-23  7:09   ` Christoph Hellwig
2024-02-23  7:09     ` Christoph Hellwig
2024-02-24  0:37     ` Elliot Berman
2024-02-24  0:37       ` Elliot Berman
2024-02-26 11:06       ` Christoph Hellwig
2024-02-26 11:06         ` Christoph Hellwig
2024-02-26 11:53         ` David Hildenbrand
2024-02-26 11:53           ` David Hildenbrand
2024-02-26 17:27           ` Elliot Berman
2024-02-26 17:27             ` Elliot Berman
2024-02-27  9:49             ` David Hildenbrand
2024-02-27  9:49               ` David Hildenbrand
2024-03-01  1:35               ` Elliot Berman
2024-03-01  1:35                 ` Elliot Berman
2024-03-04 13:10       ` Quentin Perret
2024-03-04 13:10         ` Quentin Perret
2024-03-04 23:37         ` Elliot Berman
2024-03-04 23:37           ` Elliot Berman
2024-03-05 15:30           ` Quentin Perret
2024-03-05 15:30             ` Quentin Perret
2024-03-05 20:26             ` Elliot Berman
2024-03-05 20:26               ` Elliot Berman
2024-03-06 12:05               ` Quentin Perret
2024-03-06 12:05                 ` Quentin Perret
2024-03-08 19:55                 ` Elliot Berman
2024-03-08 19:55                   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 20/35] virt: gunyah: Add interfaces to map memory into guest address space Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 21/35] gunyah: rsc_mgr: Add platform ops on mem_lend/mem_reclaim Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 22/35] virt: gunyah: Add Qualcomm Gunyah platform ops Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 23/35] virt: gunyah: Implement guestmemfd Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 24/35] virt: gunyah: Add ioctl to bind guestmem to VMs Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 25/35] virt: gunyah: guestmem: Initialize RM mem parcels from guestmem Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 26/35] virt: gunyah: Share guest VM dtb configuration to Gunyah Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 27/35] gunyah: rsc_mgr: Add RPC to enable demand paging Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 28/35] virt: gunyah: Enable " Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 29/35] gunyah: rsc_mgr: Add RPC to set VM boot context Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-14 14:02   ` Srivatsa Vaddagiri
2024-03-14 14:02     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 30/35] virt: gunyah: Allow userspace to initialize context of primary vCPU Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-03-14 14:03   ` Srivatsa Vaddagiri
2024-03-14 14:03     ` Srivatsa Vaddagiri
2024-02-22 23:16 ` [PATCH v17 31/35] virt: gunyah: Add hypercalls for sending doorbell Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 32/35] virt: gunyah: Add irqfd interface Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 33/35] virt: gunyah: Add IO handlers Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 34/35] virt: gunyah: Add ioeventfd Elliot Berman
2024-02-22 23:16   ` Elliot Berman
2024-02-22 23:16 ` [PATCH v17 35/35] MAINTAINERS: Add Gunyah hypervisor drivers section Elliot Berman
2024-02-22 23:16   ` Elliot Berman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240222-gunyah-v17-4-1e9da6763d38@quicinc.com \
    --to=quic_eberman@quicinc.com \
    --cc=akpm@linux-foundation.org \
    --cc=andersson@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=elder@linaro.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=quic_cvanscha@quicinc.com \
    --cc=quic_mnalajal@quicinc.com \
    --cc=quic_pderrin@quicinc.com \
    --cc=quic_pheragu@quicinc.com \
    --cc=quic_svaddagi@quicinc.com \
    --cc=quic_tsoni@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=seanjc@google.com \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tabba@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.