[PATCH 4.19 000/148] 4.19.311-rc1 review

[PATCH 4.19 000/148] 4.19.311-rc1 review

[Sasha Levin]

This is the start of the stable review cycle for the 4.19.311 release.
There are 148 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue Mar 26 11:50:05 PM UTC 2024.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-4.19.y&id2=v4.19.310
or in the git tree and branch at:
        git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

Thanks,
Sasha

-------------
Pseudo-Shortlog of commits:

Alban Boyé (1):
  ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet

Alex Bee (1):
  drm/rockchip: inno_hdmi: Fix video timing

Alexander Gordeev (1):
  net/iucv: fix the allocation size of iucv_path_table array

Alexander Stein (1):
  media: tc358743: register v4l2 async device only after successful
    setup

Anastasia Belova (1):
  cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return
    value

Andy Shevchenko (1):
  serial: 8250_exar: Don't remove GPIO device on suspend

AngeloGioacchino Del Regno (1):
  drm/mediatek: dsi: Fix DSI RGB666 formats and definitions

Armin Wolf (1):
  ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()

Arnd Bergmann (8):
  fs/select: rework stack allocation hack for clang
  wifi: brcmsmac: avoid function pointer casts
  media: pvrusb2: fix pvr2_stream_callback casts
  crypto: arm/sha - fix function cast warnings
  mtd: rawnand: lpc32xx_mlc: fix irq handler prototype
  media: dvb-frontends: avoid stack overflow warnings with clang
  scsi: csiostor: Avoid function pointer casts
  scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn

Baokun Li (1):
  quota: simplify drop_dquot_ref()

Cai Huoqing (1):
  drm/tegra: dsi: Make use of the helper function dev_err_probe()

Chen Ni (2):
  sr9800: Add check for usbnet_get_endpoints
  drm/tegra: dsi: Add missing check for of_find_device_by_node

Chengguang Xu (2):
  quota: code cleanup for __dquot_alloc_space()
  quota: check time limit when back out space/inode change

Christoph Hellwig (3):
  md: switch to ->check_events for media change notifications
  block: add a new set_read_only method
  md: implement ->set_read_only to hook into BLKROSET processing

Christophe JAILLET (6):
  mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the
    .remove function
  drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()
  drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling
    path of tegra_dsi_probe()
  clk: hisilicon: hi3519: Release the correct number of gates in
    hi3519_clk_unregister()
  net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()
  NFS: Fix an off by one in root_nfs_cat()

Chun-Yi Lee (1):
  aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts

Colin Ian King (1):
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin

Dan Carpenter (1):
  staging: greybus: fix get_channel_from_mode() failure path

Daniel Thompson (3):
  backlight: da9052: Fully initialize backlight_properties during probe
  backlight: lm3639: Fully initialize backlight_properties during probe
  backlight: lp8788: Fully initialize backlight_properties during probe

Daniil Dulov (1):
  media: go7007: add check of return value of go7007_read_addr()

Dinghao Liu (1):
  media: dvbdev: Fix memleak in dvb_register_device

Duoming Zhou (1):
  nfp: flower: handle acti_netdevs allocation failure

Edward Adam Davis (1):
  media: pvrusb2: fix uaf in pvr2_context_set_notify

Eric Biggers (1):
  crypto: af_alg - make some functions static

Eric Dumazet (1):
  sock_diag: annotate data-races around sock_diag_handlers[family]

Fedor Pchelkin (1):
  drm/tegra: put drm_gem_object ref on error in tegra_fb_create

Fei Shao (1):
  spi: spi-mt65xx: Fix NULL pointer access in interrupt handler

Felix Maurer (1):
  hsr: Handle failures in module init

Fuqian Huang (1):
  media: media/dvb: Use kmemdup rather than duplicating its
    implementation

Gavrilov Ilia (5):
  tcp: fix incorrect parameter validation in the do_tcp_getsockopt()
    function
  l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt()
    function
  udp: fix incorrect parameter validation in the udp_lib_getsockopt()
    function
  net: kcm: fix incorrect parameter validation in the kcm_getsockopt)
    function
  net/x25: fix incorrect parameter validation in the x25_getsockopt()
    function

Geert Uytterhoeven (2):
  ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate
  ARM: dts: arm: realview: Fix development chip ROM compatible value

Govind Singh (1):
  firmware: qcom: scm: Add WLAN VMID for Qualcomm SCM interface

Greg Joyce (1):
  block: sed-opal: handle empty atoms when parsing response

Hans de Goede (2):
  ASoC: rt5645: Make LattePanda board DMI match more precise
  crypto: arm - Rename functions to avoid conflict with crypto/sha256.h

Harry Wentland (1):
  drm: Don't treat 0 as -1 in drm_fixp2int_ceil

Herbert Xu (1):
  crypto: algif_aead - Only wake up when ctx->more is zero

Hsin-Yi Wang (1):
  drm/mediatek: Fix a null pointer crash in
    mtk_drm_crtc_finish_page_flip

Hugo Villeneuve (1):
  serial: max310x: fix syntax error in IRQ error message

Hyunwoo Kim (1):
  media: dvb-core: Fix use-after-free due to race at
    dvb_register_device()

Jan Kara (1):
  quota: Fix rcu annotations of inode dquot pointers

Jerome Brunet (1):
  ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs

Jiang Biao (1):
  fs/quota: erase unused but set variable warning

Jiaxun Yang (1):
  MIPS: Clear Cause.BD in instruction_pointer_set

Jinjie Ruan (1):
  wifi: mwifiex: debugfs: Drop unnecessary error check for
    debugfs_create_dir()

Johan Carlsson (1):
  ALSA: usb-audio: Stop parsing channels bits when all channels are
    found.

Johan Hovold (1):
  PCI/AER: Fix rootport attribute paths in ABI docs

Jonas Dreßler (1):
  Bluetooth: Remove superfluous call to hci_conn_check_pending()

Jörg Wedekind (1):
  PCI: Mark 3ware-9650SE Root Port Extended Tags as broken

Kajol Jain (1):
  powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value
    checks

Kees Cook (1):
  x86, relocs: Ignore relocations in .notes section

Konrad Dybcio (3):
  clk: qcom: reset: Commonize the de/assert functions
  clk: qcom: reset: Ensure write completion on reset de/assertion
  clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times

Kuniyuki Iwashima (1):
  af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().

Kunwu Chan (1):
  x86/xen: Add some null pointer checking to smp.c

Li Nan (1):
  md: Don't clear MD_CLOSING when the raid is about to stop

Luca Weiss (2):
  backlight: lm3630a: Initialize backlight_properties on init
  backlight: lm3630a: Don't set bl->props.brightness in get_brightness

Luiz Augusto von Dentz (1):
  Bluetooth: hci_core: Fix possible buffer overflow

Mario Limonciello (1):
  iommu/amd: Mark interrupt as managed

Masahiro Yamada (1):
  kconfig: fix infinite loop when expanding a macro at the end of file

Mauro Carvalho Chehab (3):
  ABI: sysfs-bus-pci-devices-aer_stats uses an invalid tag
  media: dvbdev: remove double-unlock
  media: dvbdev: fix error logic at dvb_register_device()

Michael Ellerman (1):
  powerpc/embedded6xx: Fix no previous prototype for avr_uart_send()
    etc.

Mikulas Patocka (2):
  dm-verity, dm-crypt: align "struct bvec_iter" correctly
  dm: call the resume method on internal suspend

Ming Lei (1):
  dm raid: fix false positive for requeue needed during reshape

Murali Karicheri (1):
  net: hsr: fix placement of logical operator in a multi-line statement

Nikita Zhandarovich (3):
  do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak
  media: em28xx: annotate unchecked call to media_device_register()
  drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()

Ondrej Mosnacek (1):
  crypto: algif_aead - fix uninitialized ctx->init

Peter Griffin (1):
  mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a
    ref

Peter Hilber (3):
  timekeeping: Fix cross-timestamp interpolation on counter wrap
  timekeeping: Fix cross-timestamp interpolation corner case decision
  timekeeping: Fix cross-timestamp interpolation for non-x86

Peter Robinson (1):
  bus: tegra-aconnect: Update dependency to ARCH_TEGRA

Quentin Schulz (2):
  drm/rockchip: lvds: do not overwrite error code
  drm/rockchip: lvds: do not print scary message when probing defer

Rafael J. Wysocki (1):
  ACPI: scan: Fix device check notification handling

Rahul Rameshbabu (4):
  wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled
  wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled
  wifi: b43: Stop correct queue in DMA worker when QoS is disabled
  wifi: b43: Disable QoS for bcm4331

Randy Dunlap (1):
  rtc: mt6397: select IRQ_DOMAIN instead of depending on it

Ranjan Kumar (1):
  scsi: mpt3sas: Prevent sending diag_reset when the controller is ready

Robert Marko (1):
  clk: qcom: reset: support resetting multiple bits

Ruud Bos (1):
  igb: move PEROUT and EXTTS isr logic to separate functions

Sam Ravnborg (1):
  sparc32: Fix section mismatch in leon_pci_grpci

Sasha Levin (1):
  Linux 4.19.311-rc1

Saurav Girepunje (2):
  b43: dma: Fix use true/false for bool type variable
  b43: main: Fix use true/false for bool type

Sean Anderson (1):
  usb: phy: generic: Get the vbus supply

Shigeru Yoshida (1):
  hsr: Fix uninit-value access in hsr_get_node()

Shiming Cheng (1):
  ipv6: fib6_rules: flush route cache when rule is changed

Sowjanya Komatineni (1):
  gpu: host1x: mipi: Update tegra_mipi_request() to be node based

Srinivasan Shanmugam (1):
  drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of
    atom_get_src_int()

Stephan Gerhold (1):
  clk: qcom: reset: Allow specifying custom reset delay

Stuart Henderson (3):
  ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
  ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
  ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll

Takashi Iwai (1):
  ALSA: seq: fix function cast warnings

Takashi Sakamoto (1):
  firewire: core: use long bus reset on gap count error

Taniya Das (1):
  clk: qcom: gdsc: Add support to update GDSC transition delay

Thinh Tran (1):
  net/bnx2x: Prevent access to a freed page in page_pool

Thomas Zimmermann (1):
  arch/powerpc: Remove <linux/fb.h> from backlight code

Toke Høiland-Jørgensen (2):
  bpf: Fix hashtab overflow check on 32-bit arches
  bpf: Fix stackmap overflow check on 32-bit arches

Tudor Ambarus (1):
  tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT

Uwe Kleine-König (1):
  Input: gpio_keys_polled - suppress deferred probe error for gpio

Vinicius Costa Gomes (1):
  igb: Fix missing time sync events

Wang Jianjian (1):
  quota: Fix potential NULL pointer dereference

Xingyuan Mo (1):
  wifi: ath10k: fix NULL pointer dereference in
    ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev()

Yang Jihong (2):
  perf evsel: Fix duplicate initialization of data->id in
    evsel__parse_sample()
  perf thread_map: Free strlist on normal path in
    thread_map__new_by_tid_str()

Yewon Choi (1):
  rds: introduce acquire/release ordering in acquire/release_in_xmit()

Yuxuan Hu (1):
  Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security

Zhipeng Lu (6):
  wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()
  SUNRPC: fix some memleaks in gssx_dec_option_array
  media: v4l2-tpg: fix some memleaks in tpg_alloc
  media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity
  media: edia: dvbdev: fix a use-after-free
  media: go7007: fix a memleak in go7007_load_encoder

 .../testing/sysfs-bus-pci-devices-aer_stats   |  12 +-
 Documentation/filesystems/Locking             |   4 +-
 Makefile                                      |   4 +-
 arch/arm/boot/dts/arm-realview-pb1176.dts     |   2 +-
 arch/arm/boot/dts/r8a73a4-ape6evm.dts         |  12 +
 arch/arm/boot/dts/r8a73a4.dtsi                |   9 +-
 arch/arm/crypto/sha256_glue.c                 |  21 +-
 arch/arm/crypto/sha256_neon_glue.c            |  24 +-
 arch/arm/crypto/sha512-glue.c                 |  12 +-
 arch/mips/include/asm/ptrace.h                |   1 +
 arch/powerpc/include/asm/backlight.h          |   5 +-
 arch/powerpc/perf/hv-gpci.c                   |  29 ++-
 .../platforms/embedded6xx/linkstation.c       |   3 -
 arch/powerpc/platforms/embedded6xx/mpc10x.h   |   3 +
 arch/powerpc/platforms/powermac/backlight.c   |  26 --
 arch/sparc/kernel/leon_pci_grpci1.c           |   2 +-
 arch/sparc/kernel/leon_pci_grpci2.c           |   2 +-
 arch/x86/tools/relocs.c                       |   8 +
 arch/x86/xen/smp.c                            |  12 +
 block/genhd.c                                 |   8 +-
 block/ioctl.c                                 |   5 +
 block/opal_proto.h                            |   1 +
 block/sed-opal.c                              |   6 +-
 crypto/af_alg.c                               |  31 ++-
 crypto/algif_aead.c                           |  10 +-
 crypto/algif_skcipher.c                       |  11 +-
 drivers/acpi/processor_idle.c                 |   2 +
 drivers/acpi/scan.c                           |   8 +-
 drivers/block/aoe/aoecmd.c                    |  12 +-
 drivers/block/aoe/aoenet.c                    |   1 +
 drivers/bus/Kconfig                           |   5 +-
 drivers/clk/hisilicon/clk-hi3519.c            |   2 +-
 drivers/clk/qcom/dispcc-sdm845.c              |   2 +
 drivers/clk/qcom/gdsc.c                       |  26 +-
 drivers/clk/qcom/gdsc.h                       |   8 +-
 drivers/clk/qcom/reset.c                      |  33 +--
 drivers/clk/qcom/reset.h                      |   2 +
 drivers/cpufreq/brcmstb-avs-cpufreq.c         |   2 +
 drivers/firewire/core-card.c                  |  14 +-
 drivers/gpu/drm/amd/amdgpu/atom.c             |   2 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |  12 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c            |  10 +-
 drivers/gpu/drm/radeon/ni.c                   |   2 +-
 drivers/gpu/drm/rockchip/inno_hdmi.c          |   4 +-
 drivers/gpu/drm/rockchip/rockchip_lvds.c      |   3 +-
 drivers/gpu/drm/tegra/dsi.c                   |  49 ++--
 drivers/gpu/drm/tegra/fb.c                    |   1 +
 drivers/gpu/host1x/mipi.c                     |   4 +-
 drivers/input/keyboard/gpio_keys_polled.c     |  10 +-
 drivers/iommu/amd_iommu_init.c                |   3 +
 drivers/md/dm-crypt.c                         |   4 +-
 drivers/md/dm-raid.c                          |   4 +-
 drivers/md/dm-verity.h                        |   4 +-
 drivers/md/dm.c                               |  26 +-
 drivers/md/md.c                               |  95 +++----
 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c |  52 +++-
 drivers/media/dvb-core/dvbdev.c               |  95 +++++--
 drivers/media/dvb-frontends/drx39xyj/drxj.c   |   5 +-
 drivers/media/dvb-frontends/stv0367.c         |  34 +--
 drivers/media/i2c/tc358743.c                  |   7 +-
 drivers/media/usb/em28xx/em28xx-cards.c       |   4 +
 drivers/media/usb/go7007/go7007-driver.c      |   8 +-
 drivers/media/usb/go7007/go7007-usb.c         |   4 +-
 drivers/media/usb/pvrusb2/pvrusb2-context.c   |  10 +-
 drivers/media/usb/pvrusb2/pvrusb2-dvb.c       |   6 +-
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c      |   6 +-
 drivers/media/v4l2-core/v4l2-mem2mem.c        |  10 +-
 drivers/mfd/syscon.c                          |   4 +-
 drivers/mmc/host/wmt-sdmmc.c                  |   4 -
 drivers/mtd/nand/raw/lpc32xx_mlc.c            |   5 +-
 .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.h   |   6 +-
 drivers/net/ethernet/intel/igb/igb_main.c     | 112 ++++-----
 .../ethernet/netronome/nfp/flower/lag_conf.c  |   5 +
 drivers/net/usb/sr9800.c                      |   4 +-
 drivers/net/wireless/ath/ath10k/wmi-tlv.c     |   4 +
 drivers/net/wireless/broadcom/b43/b43.h       |  16 ++
 drivers/net/wireless/broadcom/b43/dma.c       |   8 +-
 drivers/net/wireless/broadcom/b43/main.c      |  22 +-
 drivers/net/wireless/broadcom/b43/pio.c       |   6 +-
 .../broadcom/brcm80211/brcmsmac/phy/phy_cmn.c |   3 +-
 .../broadcom/brcm80211/brcmsmac/phy_shim.c    |   5 +-
 .../broadcom/brcm80211/brcmsmac/phy_shim.h    |   2 +-
 drivers/net/wireless/marvell/libertas/cmd.c   |  13 +-
 .../net/wireless/marvell/mwifiex/debugfs.c    |   3 -
 drivers/pci/quirks.c                          |   1 +
 drivers/rtc/Kconfig                           |   3 +-
 drivers/scsi/bfa/bfa.h                        |   9 +-
 drivers/scsi/bfa/bfa_core.c                   |   4 +-
 drivers/scsi/bfa/bfa_ioc.h                    |   8 +-
 drivers/scsi/bfa/bfad_bsg.c                   |  11 +-
 drivers/scsi/csiostor/csio_defs.h             |  18 +-
 drivers/scsi/csiostor/csio_lnode.c            |   8 +-
 drivers/scsi/csiostor/csio_lnode.h            |  13 -
 drivers/scsi/mpt3sas/mpt3sas_base.c           |   4 +-
 drivers/spi/spi-mt65xx.c                      |  22 +-
 drivers/staging/greybus/light.c               |   8 +-
 drivers/tty/serial/8250/8250_exar.c           |   5 +-
 drivers/tty/serial/max310x.c                  |   2 +-
 drivers/tty/serial/samsung.c                  |   5 +-
 drivers/usb/gadget/udc/net2272.c              |   2 +-
 drivers/usb/phy/phy-generic.c                 |   7 +
 drivers/video/backlight/da9052_bl.c           |   1 +
 drivers/video/backlight/lm3630a_bl.c          |  15 +-
 drivers/video/backlight/lm3639_bl.c           |   1 +
 drivers/video/backlight/lp8788_bl.c           |   1 +
 fs/fhandle.c                                  |   2 +-
 fs/nfs/nfsroot.c                              |   4 +-
 fs/quota/dquot.c                              | 238 ++++++++----------
 fs/select.c                                   |   2 +-
 include/crypto/if_alg.h                       |  11 +-
 include/drm/drm_fixed.h                       |   2 +-
 include/linux/blkdev.h                        |   3 +-
 include/linux/host1x.h                        |   3 +-
 include/linux/poll.h                          |   4 -
 include/linux/qcom_scm.h                      |   4 +-
 include/media/dvbdev.h                        |  15 ++
 kernel/bpf/hashtab.c                          |  14 +-
 kernel/bpf/stackmap.c                         |   9 +-
 kernel/time/timekeeping.c                     |  24 +-
 net/bluetooth/hci_core.c                      |   2 +-
 net/bluetooth/hci_event.c                     |   2 -
 net/bluetooth/rfcomm/core.c                   |   2 +-
 net/core/sock_diag.c                          |  10 +-
 net/hsr/hsr_forward.c                         |   8 +-
 net/hsr/hsr_framereg.c                        |   8 +-
 net/hsr/hsr_main.c                            |  15 +-
 net/ipv4/tcp.c                                |   4 +-
 net/ipv4/udp.c                                |   4 +-
 net/ipv6/fib6_rules.c                         |   6 +
 net/iucv/iucv.c                               |   4 +-
 net/kcm/kcmsock.c                             |   3 +-
 net/l2tp/l2tp_ppp.c                           |   4 +-
 net/rds/send.c                                |   5 +-
 net/sunrpc/addr.c                             |   4 +-
 net/sunrpc/auth_gss/gss_rpc_xdr.c             |  27 +-
 net/unix/garbage.c                            |   2 +-
 net/x25/af_x25.c                              |   4 +-
 scripts/kconfig/zconf.l                       |   7 +-
 sound/core/seq/seq_midi.c                     |   8 +-
 sound/core/seq/seq_virmidi.c                  |   9 +-
 sound/soc/codecs/rt5645.c                     |  10 +
 sound/soc/codecs/wm8962.c                     |  29 ++-
 sound/soc/intel/boards/bytcr_rt5640.c         |  12 +
 sound/soc/meson/axg-tdm-interface.c           |   4 +-
 sound/usb/stream.c                            |   5 +-
 tools/perf/util/evsel.c                       |   1 -
 tools/perf/util/thread_map.c                  |   2 +-
 147 files changed, 1027 insertions(+), 733 deletions(-)

-- 
2.43.0

[PATCH 4.19 001/148] ASoC: rt5645: Make LattePanda board DMI match more precise

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 551539a8606e28cb2a130f8ef3e9834235b456c4 ]

The DMI strings used for the LattePanda board DMI quirks are very generic.

Using the dmidecode database from https://linux-hardware.org/ shows
that the chosen DMI strings also match the following 2 laptops
which also have a rt5645 codec:

Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04
Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934

All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS
version DMI strings:

DF-BI-7-S70CR100-*
DF-BI-7-S70CR110-*
DF-BI-7-S70CR200-*
LP-BS-7-S70CR700-*

See e.g. https://linux-hardware.org/?computer=D98250A817C0

Add a partial (non exact) DMI match on this string to make the LattePanda
board DMI match more precise to avoid false-positive matches.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 5ec6e9f251c5b..5f23369d7ccad 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3797,6 +3797,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
 		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
 		  DMI_EXACT_MATCH(DMI_BOARD_VERSION, "Default string"),
+		  /*
+		   * Above strings are too generic, LattePanda BIOS versions for
+		   * all 4 hw revisions are:
+		   * DF-BI-7-S70CR100-*
+		   * DF-BI-7-S70CR110-*
+		   * DF-BI-7-S70CR200-*
+		   * LP-BS-7-S70CR700-*
+		   * Do a partial match for S70CR to avoid false positive matches.
+		   */
+		  DMI_MATCH(DMI_BIOS_VERSION, "S70CR"),
 		},
 		.driver_data = (void *)&lattepanda_board_platform_data,
 	},
-- 
2.43.0

[PATCH 4.19 002/148] x86/xen: Add some null pointer checking to smp.c

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 3693bb4465e6e32a204a5b86d3ec7e6b9f7e67c2 ]

kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/smp.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index a1cc855c539c1..a76ba342a6695 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -65,6 +65,8 @@ int xen_smp_intr_init(unsigned int cpu)
 	char *resched_name, *callfunc_name, *debug_name;
 
 	resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
+	if (!resched_name)
+		goto fail_mem;
 	per_cpu(xen_resched_irq, cpu).name = resched_name;
 	rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
 				    cpu,
@@ -77,6 +79,8 @@ int xen_smp_intr_init(unsigned int cpu)
 	per_cpu(xen_resched_irq, cpu).irq = rc;
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu);
+	if (!callfunc_name)
+		goto fail_mem;
 	per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR,
 				    cpu,
@@ -90,6 +94,9 @@ int xen_smp_intr_init(unsigned int cpu)
 
 	if (!xen_fifo_events) {
 		debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
+		if (!debug_name)
+			goto fail_mem;
+
 		per_cpu(xen_debug_irq, cpu).name = debug_name;
 		rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu,
 					     xen_debug_interrupt,
@@ -101,6 +108,9 @@ int xen_smp_intr_init(unsigned int cpu)
 	}
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
+	if (!callfunc_name)
+		goto fail_mem;
+
 	per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
 				    cpu,
@@ -114,6 +124,8 @@ int xen_smp_intr_init(unsigned int cpu)
 
 	return 0;
 
+ fail_mem:
+	rc = -ENOMEM;
  fail:
 	xen_smp_intr_free(cpu);
 	return rc;
-- 
2.43.0

[PATCH 4.19 003/148] MIPS: Clear Cause.BD in instruction_pointer_set

[Sasha Levin]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit 9d6e21ddf20293b3880ae55b9d14de91c5891c59 ]

Clear Cause.BD after we use instruction_pointer_set to override
EPC.

This can prevent exception_epc check against instruction code at
new return address.
It won't be considered as "in delay slot" after epc being overridden
anyway.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/ptrace.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index b6578611dddbf..e45c082e12316 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -65,6 +65,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
                                            unsigned long val)
 {
 	regs->cp0_epc = val;
+	regs->cp0_cause &= ~CAUSEF_BD;
 }
 
 /* Query offset/name of register from its name/offset */
-- 
2.43.0

[PATCH 4.19 004/148] net/iucv: fix the allocation size of iucv_path_table array

[Sasha Levin]

From: Alexander Gordeev <agordeev@linux.ibm.com>

[ Upstream commit b4ea9b6a18ebf7f9f3a7a60f82e925186978cfcf ]

iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/iucv/iucv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index aacaa5119b456..da4cee91fc63d 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -192,7 +192,7 @@ static char iucv_error_pathid[16] = "INVALID PATHID";
 static LIST_HEAD(iucv_handler_list);
 
 /*
- * iucv_path_table: an array of iucv_path structures.
+ * iucv_path_table: array of pointers to iucv_path structures.
  */
 static struct iucv_path **iucv_path_table;
 static unsigned long iucv_max_pathid;
@@ -603,7 +603,7 @@ static int iucv_enable(void)
 
 	get_online_cpus();
 	rc = -ENOMEM;
-	alloc_size = iucv_max_pathid * sizeof(struct iucv_path);
+	alloc_size = iucv_max_pathid * sizeof(*iucv_path_table);
 	iucv_path_table = kzalloc(alloc_size, GFP_KERNEL);
 	if (!iucv_path_table)
 		goto out;
-- 
2.43.0

[PATCH 4.19 005/148] block: sed-opal: handle empty atoms when parsing response

[Sasha Levin]

From: Greg Joyce <gjoyce@linux.ibm.com>

[ Upstream commit 5429c8de56f6b2bd8f537df3a1e04e67b9c04282 ]

The SED Opal response parsing function response_parse() does not
handle the case of an empty atom in the response. This causes
the entry count to be too high and the response fails to be
parsed. Recognizing, but ignoring, empty atoms allows response
handling to succeed.

Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/opal_proto.h | 1 +
 block/sed-opal.c   | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/block/opal_proto.h b/block/opal_proto.h
index e20be82588542..2456b8adc4574 100644
--- a/block/opal_proto.h
+++ b/block/opal_proto.h
@@ -73,6 +73,7 @@ enum opal_response_token {
 #define SHORT_ATOM_BYTE  0xBF
 #define MEDIUM_ATOM_BYTE 0xDF
 #define LONG_ATOM_BYTE   0xE3
+#define EMPTY_ATOM_BYTE  0xFF
 
 #define OPAL_INVAL_PARAM 12
 #define OPAL_MANUFACTURED_INACTIVE 0x08
diff --git a/block/sed-opal.c b/block/sed-opal.c
index 9651c40e093a5..7c7cd27411541 100644
--- a/block/sed-opal.c
+++ b/block/sed-opal.c
@@ -844,16 +844,20 @@ static int response_parse(const u8 *buf, size_t length,
 			token_length = response_parse_medium(iter, pos);
 		else if (pos[0] <= LONG_ATOM_BYTE) /* long atom */
 			token_length = response_parse_long(iter, pos);
+		else if (pos[0] == EMPTY_ATOM_BYTE) /* empty atom */
+			token_length = 1;
 		else /* TOKEN */
 			token_length = response_parse_token(iter, pos);
 
 		if (token_length < 0)
 			return token_length;
 
+		if (pos[0] != EMPTY_ATOM_BYTE)
+			num_entries++;
+
 		pos += token_length;
 		total -= token_length;
 		iter++;
-		num_entries++;
 	}
 
 	if (num_entries == 0) {
-- 
2.43.0

[PATCH 4.19 006/148] dm-verity, dm-crypt: align "struct bvec_iter" correctly

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 787f1b2800464aa277236a66eb3c279535edd460 ]

"struct bvec_iter" is defined with the __packed attribute, so it is
aligned on a single byte. On X86 (and on other architectures that support
unaligned addresses in hardware), "struct bvec_iter" is accessed using the
8-byte and 4-byte memory instructions, however these instructions are less
efficient if they operate on unaligned addresses.

(on RISC machines that don't have unaligned access in hardware, GCC
generates byte-by-byte accesses that are very inefficient - see [1])

This commit reorders the entries in "struct dm_verity_io" and "struct
convert_context", so that "struct bvec_iter" is aligned on 8 bytes.

[1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-crypt.c  | 4 ++--
 drivers/md/dm-verity.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 569904f73994a..95ed46930a90e 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -46,11 +46,11 @@
 struct convert_context {
 	struct completion restart;
 	struct bio *bio_in;
-	struct bio *bio_out;
 	struct bvec_iter iter_in;
+	struct bio *bio_out;
 	struct bvec_iter iter_out;
-	u64 cc_sector;
 	atomic_t cc_pending;
+	u64 cc_sector;
 	union {
 		struct skcipher_request *req;
 		struct aead_request *req_aead;
diff --git a/drivers/md/dm-verity.h b/drivers/md/dm-verity.h
index 6e65ec0e627a6..04ef89e318564 100644
--- a/drivers/md/dm-verity.h
+++ b/drivers/md/dm-verity.h
@@ -72,11 +72,11 @@ struct dm_verity_io {
 	/* original value of bio->bi_end_io */
 	bio_end_io_t *orig_bi_end_io;
 
+	struct bvec_iter iter;
+
 	sector_t block;
 	unsigned n_blocks;
 
-	struct bvec_iter iter;
-
 	struct work_struct work;
 
 	/*
-- 
2.43.0

[PATCH 4.19 007/148] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready

[Sasha Levin]

From: Ranjan Kumar <ranjan.kumar@broadcom.com>

[ Upstream commit ee0017c3ed8a8abfa4d40e42f908fb38c31e7515 ]

If the driver detects that the controller is not ready before sending the
first IOC facts command, it will wait for a maximum of 10 seconds for it to
become ready. However, even if the controller becomes ready within 10
seconds, the driver will still issue a diagnostic reset.

Modify the driver to avoid sending a diag reset if the controller becomes
ready within the 10-second wait time.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240221071724.14986-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 447ac667f4b2b..7588c2c11a879 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -5584,7 +5584,9 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
 		return -EFAULT;
 	}
 
- issue_diag_reset:
+	return 0;
+
+issue_diag_reset:
 	rc = _base_diag_reset(ioc);
 	return rc;
 }
-- 
2.43.0

[PATCH 4.19 008/148] Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security

[Sasha Levin]

From: Yuxuan Hu <20373622@buaa.edu.cn>

[ Upstream commit 2535b848fa0f42ddff3e5255cf5e742c9b77bb26 ]

During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:

1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.

2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.

3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.

To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.

Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/rfcomm/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 86edf512d4971..b2e69500439c9 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1939,7 +1939,7 @@ static struct rfcomm_session *rfcomm_process_rx(struct rfcomm_session *s)
 	/* Get data directly from socket receive queue without copying it. */
 	while ((skb = skb_dequeue(&sk->sk_receive_queue))) {
 		skb_orphan(skb);
-		if (!skb_linearize(skb)) {
+		if (!skb_linearize(skb) && sk->sk_state != BT_CLOSED) {
 			s = rfcomm_recv_frame(s, skb);
 			if (!s)
 				break;
-- 
2.43.0

[PATCH 4.19 009/148] firewire: core: use long bus reset on gap count error

[Sasha Levin]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit d0b06dc48fb15902d7da09c5c0861e7f042a9381 ]

When resetting the bus after a gap count error, use a long rather than
short bus reset.

IEEE 1394-1995 uses only long bus resets. IEEE 1394a adds the option of
short bus resets. When video or audio transmission is in progress and a
device is hot-plugged elsewhere on the bus, the resulting bus reset can
cause video frame drops or audio dropouts. Short bus resets reduce or
eliminate this problem. Accordingly, short bus resets are almost always
preferred.

However, on a mixed 1394/1394a bus, a short bus reset can trigger an
immediate additional bus reset. This double bus reset can be interpreted
differently by different nodes on the bus, resulting in an inconsistent gap
count after the bus reset. An inconsistent gap count will cause another bus
reset, leading to a neverending bus reset loop. This only happens for some
bus topologies, not for all mixed 1394/1394a buses.

By instead sending a long bus reset after a gap count inconsistency, we
avoid the doubled bus reset, restoring the bus to normal operation.

Signed-off-by: Adam Goldman <adamg@pobox.com>
Link: https://sourceforge.net/p/linux1394/mailman/message/58741624/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firewire/core-card.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 0e6f96c0e3957..6c464c75ac9d5 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -513,7 +513,19 @@ static void bm_work(struct work_struct *work)
 		fw_notice(card, "phy config: new root=%x, gap_count=%d\n",
 			  new_root_id, gap_count);
 		fw_send_phy_config(card, new_root_id, generation, gap_count);
-		reset_bus(card, true);
+		/*
+		 * Where possible, use a short bus reset to minimize
+		 * disruption to isochronous transfers. But in the event
+		 * of a gap count inconsistency, use a long bus reset.
+		 *
+		 * As noted in 1394a 8.4.6.2, nodes on a mixed 1394/1394a bus
+		 * may set different gap counts after a bus reset. On a mixed
+		 * 1394/1394a bus, a short bus reset can get doubled. Some
+		 * nodes may treat the double reset as one bus reset and others
+		 * may treat it as two, causing a gap count inconsistency
+		 * again. Using a long bus reset prevents this.
+		 */
+		reset_bus(card, card->gap_count != 0);
 		/* Will allocate broadcast channel after the reset. */
 		goto out;
 	}
-- 
2.43.0

[PATCH 4.19 010/148] ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet

[Sasha Levin]

From: Alban Boyé <alban.boye@protonmail.com>

[ Upstream commit f8b0127aca8c60826e7354e504a12d4a46b1c3bb ]

The bios version can differ depending if it is a dual-boot variant of the tablet.
Therefore another DMI match is required.

Signed-off-by: Alban Boyé <alban.boye@protonmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index d27dd170bedaf..19f425eb4a40f 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -523,6 +523,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Chuwi Vi8 dual-boot (CWI506) */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"),
+			/* The above are too generic, also match BIOS info */
+			DMI_MATCH(DMI_BIOS_VERSION, "CHUWI2.D86JHBNR02"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		/* Chuwi Vi10 (CWI505) */
 		.matches = {
-- 
2.43.0

[PATCH 4.19 011/148] Input: gpio_keys_polled - suppress deferred probe error for gpio

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 963465a33141d0d52338e77f80fe543d2c9dc053 ]

On a PC Engines APU our admins are faced with:

	$ dmesg | grep -c "gpio-keys-polled gpio-keys-polled: unable to claim gpio 0, err=-517"
	261

Such a message always appears when e.g. a new USB device is plugged in.

Suppress this message which considerably clutters the kernel log for
EPROBE_DEFER (i.e. -517).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240305101042.10953-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/gpio_keys_polled.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index edc7262103b9a..96e47b2401490 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -328,12 +328,10 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 			error = devm_gpio_request_one(dev, button->gpio,
 					flags, button->desc ? : DRV_NAME);
-			if (error) {
-				dev_err(dev,
-					"unable to claim gpio %u, err=%d\n",
-					button->gpio, error);
-				return error;
-			}
+			if (error)
+				return dev_err_probe(dev, error,
+						     "unable to claim gpio %u\n",
+						     button->gpio);
 
 			bdata->gpiod = gpio_to_desc(button->gpio);
 			if (!bdata->gpiod) {
-- 
2.43.0

[PATCH 4.19 012/148] ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 03c7874106ca5032a312626b927b1c35f07b1f35 ]

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 3f75cb3209ffa..674bc6f65ed0e 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2848,8 +2848,12 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 	switch (fll_id) {
 	case WM8962_FLL_MCLK:
 	case WM8962_FLL_BCLK:
+		fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
+		break;
 	case WM8962_FLL_OSC:
 		fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
+		snd_soc_component_update_bits(component, WM8962_PLL2,
+					      WM8962_OSC_ENA, WM8962_OSC_ENA);
 		break;
 	case WM8962_FLL_INT:
 		snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1,
-- 
2.43.0

[PATCH 4.19 013/148] ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 6fa849e4d78b880e878138bf238e4fd2bac3c4fa ]

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 674bc6f65ed0e..55e041031d398 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2177,6 +2177,9 @@ SND_SOC_DAPM_PGA_E("HPOUT", SND_SOC_NOPM, 0, 0, NULL, 0, hp_event,
 
 SND_SOC_DAPM_OUTPUT("HPOUTL"),
 SND_SOC_DAPM_OUTPUT("HPOUTR"),
+
+SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
 };
 
 static const struct snd_soc_dapm_widget wm8962_dapm_spk_mono_widgets[] = {
@@ -2184,7 +2187,6 @@ SND_SOC_DAPM_MIXER("Speaker Mixer", WM8962_MIXER_ENABLES, 1, 0,
 		   spkmixl, ARRAY_SIZE(spkmixl)),
 SND_SOC_DAPM_MUX_E("Speaker PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
 		   out_pga_event, SND_SOC_DAPM_POST_PMU),
-SND_SOC_DAPM_PGA("Speaker Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
 SND_SOC_DAPM_OUTPUT("SPKOUT"),
 };
 
@@ -2199,9 +2201,6 @@ SND_SOC_DAPM_MUX_E("SPKOUTL PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
 SND_SOC_DAPM_MUX_E("SPKOUTR PGA", WM8962_PWR_MGMT_2, 3, 0, &spkoutr_mux,
 		   out_pga_event, SND_SOC_DAPM_POST_PMU),
 
-SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
-SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
-
 SND_SOC_DAPM_OUTPUT("SPKOUTL"),
 SND_SOC_DAPM_OUTPUT("SPKOUTR"),
 };
@@ -2311,12 +2310,18 @@ static const struct snd_soc_dapm_route wm8962_spk_mono_intercon[] = {
 	{ "Speaker PGA", "Mixer", "Speaker Mixer" },
 	{ "Speaker PGA", "DAC", "DACL" },
 
-	{ "Speaker Output", NULL, "Speaker PGA" },
-	{ "Speaker Output", NULL, "SYSCLK" },
-	{ "Speaker Output", NULL, "TOCLK" },
-	{ "Speaker Output", NULL, "TEMP_SPK" },
+	{ "SPKOUTL Output", NULL, "Speaker PGA" },
+	{ "SPKOUTL Output", NULL, "SYSCLK" },
+	{ "SPKOUTL Output", NULL, "TOCLK" },
+	{ "SPKOUTL Output", NULL, "TEMP_SPK" },
+
+	{ "SPKOUTR Output", NULL, "Speaker PGA" },
+	{ "SPKOUTR Output", NULL, "SYSCLK" },
+	{ "SPKOUTR Output", NULL, "TOCLK" },
+	{ "SPKOUTR Output", NULL, "TEMP_SPK" },
 
-	{ "SPKOUT", NULL, "Speaker Output" },
+	{ "SPKOUT", NULL, "SPKOUTL Output" },
+	{ "SPKOUT", NULL, "SPKOUTR Output" },
 };
 
 static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
-- 
2.43.0

[PATCH 4.19 014/148] ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 96e202f8c52ac49452f83317cf3b34cd1ad81e18 ]

Use source instead of ret, which seems to be unrelated and will always
be zero.

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 55e041031d398..74321c16e41f4 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2867,7 +2867,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 				    WM8962_FLL_FRC_NCO, WM8962_FLL_FRC_NCO);
 		break;
 	default:
-		dev_err(component->dev, "Unknown FLL source %d\n", ret);
+		dev_err(component->dev, "Unknown FLL source %d\n", source);
 		return -EINVAL;
 	}
 
-- 
2.43.0

[PATCH 4.19 015/148] crypto: algif_aead - fix uninitialized ctx->init

[Sasha Levin]

From: Ondrej Mosnacek <omosnace@redhat.com>

[ Upstream commit 21dfbcd1f5cbff9cf2f9e7e43475aed8d072b0dd ]

In skcipher_accept_parent_nokey() the whole af_alg_ctx structure is
cleared by memset() after allocation, so add such memset() also to
aead_accept_parent_nokey() so that the new "init" field is also
initialized to zero. Without that the initial ctx->init checks might
randomly return true and cause errors.

While there, also remove the redundant zero assignments in both
functions.

Found via libkcapi testsuite.

Cc: Stephan Mueller <smueller@chronox.de>
Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when ctx->more is zero")
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/algif_aead.c     | 6 ------
 crypto/algif_skcipher.c | 7 +------
 2 files changed, 1 insertion(+), 12 deletions(-)

diff --git a/crypto/algif_aead.c b/crypto/algif_aead.c
index 182783801ffa6..4cb2b12175490 100644
--- a/crypto/algif_aead.c
+++ b/crypto/algif_aead.c
@@ -563,12 +563,6 @@ static int aead_accept_parent_nokey(void *private, struct sock *sk)
 
 	INIT_LIST_HEAD(&ctx->tsgl_list);
 	ctx->len = len;
-	ctx->used = 0;
-	atomic_set(&ctx->rcvused, 0);
-	ctx->more = 0;
-	ctx->merge = 0;
-	ctx->enc = 0;
-	ctx->aead_assoclen = 0;
 	crypto_init_wait(&ctx->wait);
 
 	ask->private = ctx;
diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c
index 9d2e9783c0d4e..af08fc18a4926 100644
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -337,6 +337,7 @@ static int skcipher_accept_parent_nokey(void *private, struct sock *sk)
 	ctx = sock_kmalloc(sk, len, GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
+	memset(ctx, 0, len);
 
 	ctx->iv = sock_kmalloc(sk, crypto_skcipher_ivsize(tfm),
 			       GFP_KERNEL);
@@ -344,16 +345,10 @@ static int skcipher_accept_parent_nokey(void *private, struct sock *sk)
 		sock_kfree_s(sk, ctx, len);
 		return -ENOMEM;
 	}
-
 	memset(ctx->iv, 0, crypto_skcipher_ivsize(tfm));
 
 	INIT_LIST_HEAD(&ctx->tsgl_list);
 	ctx->len = len;
-	ctx->used = 0;
-	atomic_set(&ctx->rcvused, 0);
-	ctx->more = 0;
-	ctx->merge = 0;
-	ctx->enc = 0;
 	crypto_init_wait(&ctx->wait);
 
 	ask->private = ctx;
-- 
2.43.0

[PATCH 4.19 016/148] crypto: af_alg - make some functions static

[Sasha Levin]

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit 466e0759269d31485074126700574230bfff3b1c ]

Some exported functions in af_alg.c aren't used outside of that file.
Therefore, un-export them and make them 'static'.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: f3c802a1f300 ("crypto: algif_aead - Only wake up when ctx->more is zero")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/af_alg.c         | 20 +++++++-------------
 include/crypto/if_alg.h |  7 -------
 2 files changed, 7 insertions(+), 20 deletions(-)

diff --git a/crypto/af_alg.c b/crypto/af_alg.c
index 914496b184a97..ed62632a1c355 100644
--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -429,12 +429,12 @@ int af_alg_make_sg(struct af_alg_sgl *sgl, struct iov_iter *iter, int len)
 }
 EXPORT_SYMBOL_GPL(af_alg_make_sg);
 
-void af_alg_link_sg(struct af_alg_sgl *sgl_prev, struct af_alg_sgl *sgl_new)
+static void af_alg_link_sg(struct af_alg_sgl *sgl_prev,
+			   struct af_alg_sgl *sgl_new)
 {
 	sg_unmark_end(sgl_prev->sg + sgl_prev->npages - 1);
 	sg_chain(sgl_prev->sg, sgl_prev->npages + 1, sgl_new->sg);
 }
-EXPORT_SYMBOL_GPL(af_alg_link_sg);
 
 void af_alg_free_sg(struct af_alg_sgl *sgl)
 {
@@ -445,7 +445,7 @@ void af_alg_free_sg(struct af_alg_sgl *sgl)
 }
 EXPORT_SYMBOL_GPL(af_alg_free_sg);
 
-int af_alg_cmsg_send(struct msghdr *msg, struct af_alg_control *con)
+static int af_alg_cmsg_send(struct msghdr *msg, struct af_alg_control *con)
 {
 	struct cmsghdr *cmsg;
 
@@ -484,7 +484,6 @@ int af_alg_cmsg_send(struct msghdr *msg, struct af_alg_control *con)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(af_alg_cmsg_send);
 
 /**
  * af_alg_alloc_tsgl - allocate the TX SGL
@@ -492,7 +491,7 @@ EXPORT_SYMBOL_GPL(af_alg_cmsg_send);
  * @sk socket of connection to user space
  * @return: 0 upon success, < 0 upon error
  */
-int af_alg_alloc_tsgl(struct sock *sk)
+static int af_alg_alloc_tsgl(struct sock *sk)
 {
 	struct alg_sock *ask = alg_sk(sk);
 	struct af_alg_ctx *ctx = ask->private;
@@ -521,7 +520,6 @@ int af_alg_alloc_tsgl(struct sock *sk)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(af_alg_alloc_tsgl);
 
 /**
  * aead_count_tsgl - Count number of TX SG entries
@@ -658,7 +656,7 @@ EXPORT_SYMBOL_GPL(af_alg_pull_tsgl);
  *
  * @areq Request holding the TX and RX SGL
  */
-void af_alg_free_areq_sgls(struct af_alg_async_req *areq)
+static void af_alg_free_areq_sgls(struct af_alg_async_req *areq)
 {
 	struct sock *sk = areq->sk;
 	struct alg_sock *ask = alg_sk(sk);
@@ -687,7 +685,6 @@ void af_alg_free_areq_sgls(struct af_alg_async_req *areq)
 		sock_kfree_s(sk, tsgl, areq->tsgl_entries * sizeof(*tsgl));
 	}
 }
-EXPORT_SYMBOL_GPL(af_alg_free_areq_sgls);
 
 /**
  * af_alg_wait_for_wmem - wait for availability of writable memory
@@ -696,7 +693,7 @@ EXPORT_SYMBOL_GPL(af_alg_free_areq_sgls);
  * @flags If MSG_DONTWAIT is set, then only report if function would sleep
  * @return 0 when writable memory is available, < 0 upon error
  */
-int af_alg_wait_for_wmem(struct sock *sk, unsigned int flags)
+static int af_alg_wait_for_wmem(struct sock *sk, unsigned int flags)
 {
 	DEFINE_WAIT_FUNC(wait, woken_wake_function);
 	int err = -ERESTARTSYS;
@@ -721,7 +718,6 @@ int af_alg_wait_for_wmem(struct sock *sk, unsigned int flags)
 
 	return err;
 }
-EXPORT_SYMBOL_GPL(af_alg_wait_for_wmem);
 
 /**
  * af_alg_wmem_wakeup - wakeup caller when writable memory is available
@@ -790,8 +786,7 @@ EXPORT_SYMBOL_GPL(af_alg_wait_for_data);
  *
  * @sk socket of connection to user space
  */
-
-void af_alg_data_wakeup(struct sock *sk)
+static void af_alg_data_wakeup(struct sock *sk)
 {
 	struct alg_sock *ask = alg_sk(sk);
 	struct af_alg_ctx *ctx = ask->private;
@@ -809,7 +804,6 @@ void af_alg_data_wakeup(struct sock *sk)
 	sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
 	rcu_read_unlock();
 }
-EXPORT_SYMBOL_GPL(af_alg_data_wakeup);
 
 /**
  * af_alg_sendmsg - implementation of sendmsg system call handler
diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h
index 2c1748dc66405..f0c83a7bd078b 100644
--- a/include/crypto/if_alg.h
+++ b/include/crypto/if_alg.h
@@ -172,9 +172,6 @@ int af_alg_accept(struct sock *sk, struct socket *newsock, bool kern);
 
 int af_alg_make_sg(struct af_alg_sgl *sgl, struct iov_iter *iter, int len);
 void af_alg_free_sg(struct af_alg_sgl *sgl);
-void af_alg_link_sg(struct af_alg_sgl *sgl_prev, struct af_alg_sgl *sgl_new);
-
-int af_alg_cmsg_send(struct msghdr *msg, struct af_alg_control *con);
 
 static inline struct alg_sock *alg_sk(struct sock *sk)
 {
@@ -233,15 +230,11 @@ static inline bool af_alg_readable(struct sock *sk)
 	return PAGE_SIZE <= af_alg_rcvbuf(sk);
 }
 
-int af_alg_alloc_tsgl(struct sock *sk);
 unsigned int af_alg_count_tsgl(struct sock *sk, size_t bytes, size_t offset);
 void af_alg_pull_tsgl(struct sock *sk, size_t used, struct scatterlist *dst,
 		      size_t dst_offset);
-void af_alg_free_areq_sgls(struct af_alg_async_req *areq);
-int af_alg_wait_for_wmem(struct sock *sk, unsigned int flags);
 void af_alg_wmem_wakeup(struct sock *sk);
 int af_alg_wait_for_data(struct sock *sk, unsigned flags);
-void af_alg_data_wakeup(struct sock *sk);
 int af_alg_sendmsg(struct socket *sock, struct msghdr *msg, size_t size,
 		   unsigned int ivsize);
 ssize_t af_alg_sendpage(struct socket *sock, struct page *page,
-- 
2.43.0

[PATCH 4.19 017/148] crypto: algif_aead - Only wake up when ctx->more is zero

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit f3c802a1f30013f8f723b62d7fa49eb9e991da23 ]

AEAD does not support partial requests so we must not wake up
while ctx->more is set.  In order to distinguish between the
case of no data sent yet and a zero-length request, a new init
flag has been added to ctx.

SKCIPHER has also been modified to ensure that at least a block
of data is available if there is more data to come.

Fixes: 2d97591ef43d ("crypto: af_alg - consolidation of...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/af_alg.c         | 11 ++++++++---
 crypto/algif_aead.c     |  4 ++--
 crypto/algif_skcipher.c |  4 ++--
 include/crypto/if_alg.h |  4 +++-
 4 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/crypto/af_alg.c b/crypto/af_alg.c
index ed62632a1c355..78f041754f04f 100644
--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -648,6 +648,7 @@ void af_alg_pull_tsgl(struct sock *sk, size_t used, struct scatterlist *dst,
 
 	if (!ctx->used)
 		ctx->merge = 0;
+	ctx->init = ctx->more;
 }
 EXPORT_SYMBOL_GPL(af_alg_pull_tsgl);
 
@@ -747,9 +748,10 @@ EXPORT_SYMBOL_GPL(af_alg_wmem_wakeup);
  *
  * @sk socket of connection to user space
  * @flags If MSG_DONTWAIT is set, then only report if function would sleep
+ * @min Set to minimum request size if partial requests are allowed.
  * @return 0 when writable memory is available, < 0 upon error
  */
-int af_alg_wait_for_data(struct sock *sk, unsigned flags)
+int af_alg_wait_for_data(struct sock *sk, unsigned flags, unsigned min)
 {
 	DEFINE_WAIT_FUNC(wait, woken_wake_function);
 	struct alg_sock *ask = alg_sk(sk);
@@ -767,7 +769,9 @@ int af_alg_wait_for_data(struct sock *sk, unsigned flags)
 		if (signal_pending(current))
 			break;
 		timeout = MAX_SCHEDULE_TIMEOUT;
-		if (sk_wait_event(sk, &timeout, (ctx->used || !ctx->more),
+		if (sk_wait_event(sk, &timeout,
+				  ctx->init && (!ctx->more ||
+						(min && ctx->used >= min)),
 				  &wait)) {
 			err = 0;
 			break;
@@ -856,7 +860,7 @@ int af_alg_sendmsg(struct socket *sock, struct msghdr *msg, size_t size,
 	}
 
 	lock_sock(sk);
-	if (!ctx->more && ctx->used) {
+	if (ctx->init && (init || !ctx->more)) {
 		err = -EINVAL;
 		goto unlock;
 	}
@@ -867,6 +871,7 @@ int af_alg_sendmsg(struct socket *sock, struct msghdr *msg, size_t size,
 			memcpy(ctx->iv, con.iv->iv, ivsize);
 
 		ctx->aead_assoclen = con.aead_assoclen;
+		ctx->init = true;
 	}
 
 	while (size) {
diff --git a/crypto/algif_aead.c b/crypto/algif_aead.c
index 4cb2b12175490..63ba443b23157 100644
--- a/crypto/algif_aead.c
+++ b/crypto/algif_aead.c
@@ -110,8 +110,8 @@ static int _aead_recvmsg(struct socket *sock, struct msghdr *msg,
 	size_t usedpages = 0;		/* [in]  RX bufs to be used from user */
 	size_t processed = 0;		/* [in]  TX bufs to be consumed */
 
-	if (!ctx->used) {
-		err = af_alg_wait_for_data(sk, flags);
+	if (!ctx->init || ctx->more) {
+		err = af_alg_wait_for_data(sk, flags, 0);
 		if (err)
 			return err;
 	}
diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c
index af08fc18a4926..6cfdbe71a2ce3 100644
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -65,8 +65,8 @@ static int _skcipher_recvmsg(struct socket *sock, struct msghdr *msg,
 	int err = 0;
 	size_t len = 0;
 
-	if (!ctx->used) {
-		err = af_alg_wait_for_data(sk, flags);
+	if (!ctx->init || (ctx->more && ctx->used < bs)) {
+		err = af_alg_wait_for_data(sk, flags, bs);
 		if (err)
 			return err;
 	}
diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h
index f0c83a7bd078b..69fc69973269e 100644
--- a/include/crypto/if_alg.h
+++ b/include/crypto/if_alg.h
@@ -140,6 +140,7 @@ struct af_alg_async_req {
  *			SG?
  * @enc:		Cryptographic operation to be performed when
  *			recvmsg is invoked.
+ * @init:		True if metadata has been sent.
  * @len:		Length of memory allocated for this data structure.
  * @inflight:		Non-zero when AIO requests are in flight.
  */
@@ -157,6 +158,7 @@ struct af_alg_ctx {
 	bool more;
 	bool merge;
 	bool enc;
+	bool init;
 
 	unsigned int len;
 
@@ -234,7 +236,7 @@ unsigned int af_alg_count_tsgl(struct sock *sk, size_t bytes, size_t offset);
 void af_alg_pull_tsgl(struct sock *sk, size_t used, struct scatterlist *dst,
 		      size_t dst_offset);
 void af_alg_wmem_wakeup(struct sock *sk);
-int af_alg_wait_for_data(struct sock *sk, unsigned flags);
+int af_alg_wait_for_data(struct sock *sk, unsigned flags, unsigned min);
 int af_alg_sendmsg(struct socket *sock, struct msghdr *msg, size_t size,
 		   unsigned int ivsize);
 ssize_t af_alg_sendpage(struct socket *sock, struct page *page,
-- 
2.43.0

[PATCH 4.19 018/148] do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit 3948abaa4e2be938ccdfc289385a27342fb13d43 ]

syzbot identified a kernel information leak vulnerability in
do_sys_name_to_handle() and issued the following report [1].

[1]
"BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x100 lib/usercopy.c:40
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 _copy_to_user+0xbc/0x100 lib/usercopy.c:40
 copy_to_user include/linux/uaccess.h:191 [inline]
 do_sys_name_to_handle fs/fhandle.c:73 [inline]
 __do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
 __se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94
 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94
 ...

Uninit was created at:
 slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517
 __do_kmalloc_node mm/slab_common.c:1006 [inline]
 __kmalloc+0x121/0x3c0 mm/slab_common.c:1020
 kmalloc include/linux/slab.h:604 [inline]
 do_sys_name_to_handle fs/fhandle.c:39 [inline]
 __do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
 __se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94
 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94
 ...

Bytes 18-19 of 20 are uninitialized
Memory access of size 20 starts at ffff888128a46380
Data copied to user address 0000000020000240"

Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to
solve the problem.

Fixes: 990d6c2d7aee ("vfs: Add name to file handle conversion support")
Suggested-by: Chuck Lever III <chuck.lever@oracle.com>
Reported-and-tested-by: <syzbot+09b349b3066c2e0b1e96@syzkaller.appspotmail.com>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20240119153906.4367-1-n.zhandarovich@fintech.ru
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fhandle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/fhandle.c b/fs/fhandle.c
index 0ee727485615b..cb78dbfd7cd51 100644
--- a/fs/fhandle.c
+++ b/fs/fhandle.c
@@ -37,7 +37,7 @@ static long do_sys_name_to_handle(struct path *path,
 	if (f_handle.handle_bytes > MAX_HANDLE_SZ)
 		return -EINVAL;
 
-	handle = kmalloc(sizeof(struct file_handle) + f_handle.handle_bytes,
+	handle = kzalloc(sizeof(struct file_handle) + f_handle.handle_bytes,
 			 GFP_KERNEL);
 	if (!handle)
 		return -ENOMEM;
-- 
2.43.0

[PATCH 4.19 019/148] fs/select: rework stack allocation hack for clang

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit ddb9fd7a544088ed70eccbb9f85e9cc9952131c1 ]

A while ago, we changed the way that select() and poll() preallocate
a temporary buffer just under the size of the static warning limit of
1024 bytes, as clang was frequently going slightly above that limit.

The warnings have recently returned and I took another look. As it turns
out, clang is not actually inherently worse at reserving stack space,
it just happens to inline do_select() into core_sys_select(), while gcc
never inlines it.

Annotate do_select() to never be inlined and in turn remove the special
case for the allocation size. This should give the same behavior for
both clang and gcc all the time and once more avoids those warnings.

Fixes: ad312f95d41c ("fs/select: avoid clang stack usage warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240216202352.2492798-1-arnd@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/select.c          | 2 +-
 include/linux/poll.h | 4 ----
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/fs/select.c b/fs/select.c
index 1c3985d0bcc3e..e09c43cd75bbb 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -448,7 +448,7 @@ static inline void wait_key_set(poll_table *wait, unsigned long in,
 		wait->_key |= POLLOUT_SET;
 }
 
-static int do_select(int n, fd_set_bits *fds, struct timespec64 *end_time)
+static noinline_for_stack int do_select(int n, fd_set_bits *fds, struct timespec64 *end_time)
 {
 	ktime_t expire, *to = NULL;
 	struct poll_wqueues table;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 1cdc32b1f1b08..7e0fdcf905d2e 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -16,11 +16,7 @@
 extern struct ctl_table epoll_table[]; /* for sysctl */
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
    additional memory. */
-#ifdef __clang__
-#define MAX_STACK_ALLOC 768
-#else
 #define MAX_STACK_ALLOC 832
-#endif
 #define FRONTEND_STACK_ALLOC	256
 #define SELECT_STACK_ALLOC	FRONTEND_STACK_ALLOC
 #define POLL_STACK_ALLOC	FRONTEND_STACK_ALLOC
-- 
2.43.0

[PATCH 4.19 020/148] md: switch to ->check_events for media change notifications

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit a564e23f0f99759f453dbefcb9160dec6d99df96 ]

md is the last driver using the legacy media_changed method.  Switch
it over to (not so) new ->clear_events approach, which also removes the
need for the ->revalidate_disk method.

Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: remove unused 'bdops' variable in disk_clear_events()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 9674f54e41ff ("md: Don't clear MD_CLOSING when the raid is about to stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/filesystems/Locking |  4 +---
 block/genhd.c                     |  8 +-------
 drivers/md/md.c                   | 19 ++++++++-----------
 include/linux/blkdev.h            |  2 --
 4 files changed, 10 insertions(+), 23 deletions(-)

diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index efea228ccd8af..da300708404d1 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -404,7 +404,6 @@ prototypes:
 	int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
 	int (*direct_access) (struct block_device *, sector_t, void **,
 				unsigned long *);
-	int (*media_changed) (struct gendisk *);
 	void (*unlock_native_capacity) (struct gendisk *);
 	int (*revalidate_disk) (struct gendisk *);
 	int (*getgeo)(struct block_device *, struct hd_geometry *);
@@ -417,13 +416,12 @@ release:		yes
 ioctl:			no
 compat_ioctl:		no
 direct_access:		no
-media_changed:		no
 unlock_native_capacity:	no
 revalidate_disk:	no
 getgeo:			no
 swap_slot_free_notify:	no	(see below)
 
-media_changed, unlock_native_capacity and revalidate_disk are called only from
+unlock_native_capacity and revalidate_disk are called only from
 check_disk_change().
 
 swap_slot_free_notify is called with swap_lock and sometimes the page lock
diff --git a/block/genhd.c b/block/genhd.c
index 27a410d310870..d2502e175aca0 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1771,18 +1771,12 @@ void disk_flush_events(struct gendisk *disk, unsigned int mask)
  */
 unsigned int disk_clear_events(struct gendisk *disk, unsigned int mask)
 {
-	const struct block_device_operations *bdops = disk->fops;
 	struct disk_events *ev = disk->ev;
 	unsigned int pending;
 	unsigned int clearing = mask;
 
-	if (!ev) {
-		/* for drivers still using the old ->media_changed method */
-		if ((mask & DISK_EVENT_MEDIA_CHANGE) &&
-		    bdops->media_changed && bdops->media_changed(disk))
-			return DISK_EVENT_MEDIA_CHANGE;
+	if (!ev)
 		return 0;
-	}
 
 	disk_block_events(disk);
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 3cc28b2836078..a137f8b4a0541 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5455,6 +5455,7 @@ static int md_alloc(dev_t dev, char *name)
 	 * remove it now.
 	 */
 	disk->flags |= GENHD_FL_EXT_DEVT;
+	disk->events |= DISK_EVENT_MEDIA_CHANGE;
 	mddev->gendisk = disk;
 	add_disk(disk);
 
@@ -7565,20 +7566,17 @@ static void md_release(struct gendisk *disk, fmode_t mode)
 	mddev_put(mddev);
 }
 
-static int md_media_changed(struct gendisk *disk)
-{
-	struct mddev *mddev = disk->private_data;
-
-	return mddev->changed;
-}
-
-static int md_revalidate(struct gendisk *disk)
+static unsigned int md_check_events(struct gendisk *disk, unsigned int clearing)
 {
 	struct mddev *mddev = disk->private_data;
+	unsigned int ret = 0;
 
+	if (mddev->changed)
+		ret = DISK_EVENT_MEDIA_CHANGE;
 	mddev->changed = 0;
-	return 0;
+	return ret;
 }
+
 static const struct block_device_operations md_fops =
 {
 	.owner		= THIS_MODULE,
@@ -7589,8 +7587,7 @@ static const struct block_device_operations md_fops =
 	.compat_ioctl	= md_compat_ioctl,
 #endif
 	.getgeo		= md_getgeo,
-	.media_changed  = md_media_changed,
-	.revalidate_disk= md_revalidate,
+	.check_events	= md_check_events,
 };
 
 static int md_thread(void *arg)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 56fe682d9beb4..ac407c1d4d40f 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1994,8 +1994,6 @@ struct block_device_operations {
 	int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
 	unsigned int (*check_events) (struct gendisk *disk,
 				      unsigned int clearing);
-	/* ->media_changed() is DEPRECATED, use ->check_events() instead */
-	int (*media_changed) (struct gendisk *);
 	void (*unlock_native_capacity) (struct gendisk *);
 	int (*revalidate_disk) (struct gendisk *);
 	int (*getgeo)(struct block_device *, struct hd_geometry *);
-- 
2.43.0

[PATCH 4.19 021/148] block: add a new set_read_only method

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit e00adcadf3af7a8335026d71ab9f0e0a922191ac ]

Add a new method to allow for driver-specific processing when setting or
clearing the block device read-only state.  This allows to replace the
cumbersome and error-prone override of the whole ioctl implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 9674f54e41ff ("md: Don't clear MD_CLOSING when the raid is about to stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/ioctl.c          | 5 +++++
 include/linux/blkdev.h | 1 +
 2 files changed, 6 insertions(+)

diff --git a/block/ioctl.c b/block/ioctl.c
index 3884d810efd27..6d6c4f4c411a6 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -451,6 +451,11 @@ static int blkdev_roset(struct block_device *bdev, fmode_t mode,
 		return ret;
 	if (get_user(n, (int __user *)arg))
 		return -EFAULT;
+	if (bdev->bd_disk->fops->set_read_only) {
+		ret = bdev->bd_disk->fops->set_read_only(bdev, n);
+		if (ret)
+			return ret;
+	}
 	set_device_ro(bdev, n);
 	return 0;
 }
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ac407c1d4d40f..8f0aafae09d97 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1997,6 +1997,7 @@ struct block_device_operations {
 	void (*unlock_native_capacity) (struct gendisk *);
 	int (*revalidate_disk) (struct gendisk *);
 	int (*getgeo)(struct block_device *, struct hd_geometry *);
+	int (*set_read_only)(struct block_device *bdev, bool ro);
 	/* this callback is with swap_lock and sometimes page table lock held */
 	void (*swap_slot_free_notify) (struct block_device *, unsigned long);
 	struct module *owner;
-- 
2.43.0

[PATCH 4.19 022/148] md: implement ->set_read_only to hook into BLKROSET processing

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 118cf084adb3964d06e1667cf7d702e56e5cd2c5 ]

Implement the ->set_read_only method instead of parsing the actual
ioctl command.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 9674f54e41ff ("md: Don't clear MD_CLOSING when the raid is about to stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 62 ++++++++++++++++++++++++-------------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index a137f8b4a0541..8123c44de7dc8 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7172,7 +7172,6 @@ static inline bool md_ioctl_valid(unsigned int cmd)
 {
 	switch (cmd) {
 	case ADD_NEW_DISK:
-	case BLKROSET:
 	case GET_ARRAY_INFO:
 	case GET_BITMAP_FILE:
 	case GET_DISK_INFO:
@@ -7200,7 +7199,6 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 	int err = 0;
 	void __user *argp = (void __user *)arg;
 	struct mddev *mddev = NULL;
-	int ro;
 	bool did_set_md_closing = false;
 
 	if (!md_ioctl_valid(cmd))
@@ -7391,35 +7389,6 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 			goto unlock;
 		}
 		break;
-
-	case BLKROSET:
-		if (get_user(ro, (int __user *)(arg))) {
-			err = -EFAULT;
-			goto unlock;
-		}
-		err = -EINVAL;
-
-		/* if the bdev is going readonly the value of mddev->ro
-		 * does not matter, no writes are coming
-		 */
-		if (ro)
-			goto unlock;
-
-		/* are we are already prepared for writes? */
-		if (mddev->ro != 1)
-			goto unlock;
-
-		/* transitioning to readauto need only happen for
-		 * arrays that call md_write_start
-		 */
-		if (mddev->pers) {
-			err = restart_array(mddev);
-			if (err == 0) {
-				mddev->ro = 2;
-				set_disk_ro(mddev->gendisk, 0);
-			}
-		}
-		goto unlock;
 	}
 
 	/*
@@ -7513,6 +7482,36 @@ static int md_compat_ioctl(struct block_device *bdev, fmode_t mode,
 }
 #endif /* CONFIG_COMPAT */
 
+static int md_set_read_only(struct block_device *bdev, bool ro)
+{
+	struct mddev *mddev = bdev->bd_disk->private_data;
+	int err;
+
+	err = mddev_lock(mddev);
+	if (err)
+		return err;
+
+	if (!mddev->raid_disks && !mddev->external) {
+		err = -ENODEV;
+		goto out_unlock;
+	}
+
+	/*
+	 * Transitioning to read-auto need only happen for arrays that call
+	 * md_write_start and which are not ready for writes yet.
+	 */
+	if (!ro && mddev->ro == 1 && mddev->pers) {
+		err = restart_array(mddev);
+		if (err)
+			goto out_unlock;
+		mddev->ro = 2;
+	}
+
+out_unlock:
+	mddev_unlock(mddev);
+	return err;
+}
+
 static int md_open(struct block_device *bdev, fmode_t mode)
 {
 	/*
@@ -7588,6 +7587,7 @@ static const struct block_device_operations md_fops =
 #endif
 	.getgeo		= md_getgeo,
 	.check_events	= md_check_events,
+	.set_read_only	= md_set_read_only,
 };
 
 static int md_thread(void *arg)
-- 
2.43.0

[PATCH 4.19 023/148] md: Don't clear MD_CLOSING when the raid is about to stop

[Sasha Levin]

From: Li Nan <linan122@huawei.com>

[ Upstream commit 9674f54e41fffaf06f6a60202e1fa4cc13de3cf5 ]

The raid should not be opened anymore when it is about to be stopped.
However, other processes can open it again if the flag MD_CLOSING is
cleared before exiting. From now on, this flag will not be cleared when
the raid will be stopped.

Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-6-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8123c44de7dc8..68eb3220be1c9 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5886,7 +5886,15 @@ static void md_clean(struct mddev *mddev)
 	mddev->persistent = 0;
 	mddev->level = LEVEL_NONE;
 	mddev->clevel[0] = 0;
-	mddev->flags = 0;
+	/*
+	 * Don't clear MD_CLOSING, or mddev can be opened again.
+	 * 'hold_active != 0' means mddev is still in the creation
+	 * process and will be used later.
+	 */
+	if (mddev->hold_active)
+		mddev->flags = 0;
+	else
+		mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
 	mddev->sb_flags = 0;
 	mddev->ro = 0;
 	mddev->metadata_type[0] = 0;
@@ -7199,7 +7207,6 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 	int err = 0;
 	void __user *argp = (void __user *)arg;
 	struct mddev *mddev = NULL;
-	bool did_set_md_closing = false;
 
 	if (!md_ioctl_valid(cmd))
 		return -ENOTTY;
@@ -7294,7 +7301,6 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 			err = -EBUSY;
 			goto out;
 		}
-		did_set_md_closing = true;
 		mutex_unlock(&mddev->open_mutex);
 		sync_blockdev(bdev);
 	}
@@ -7458,7 +7464,7 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 		mddev->hold_active = 0;
 	mddev_unlock(mddev);
 out:
-	if(did_set_md_closing)
+	if (cmd == STOP_ARRAY_RO || (err && cmd == STOP_ARRAY))
 		clear_bit(MD_CLOSING, &mddev->flags);
 	return err;
 }
-- 
2.43.0

[PATCH 4.19 024/148] aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts

[Sasha Levin]

From: Chun-Yi Lee <jlee@suse.com>

[ Upstream commit f98364e926626c678fb4b9004b75cacf92ff0662 ]

This patch is against CVE-2023-6270. The description of cve is:

  A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
  kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
  `struct net_device`, and a use-after-free can be triggered by racing
  between the free on the struct and the access through the `skbtxq`
  global queue. This could lead to a denial of service condition or
  potential code execution.

In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.

This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().

Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: 7562f876cd93 ("[NET]: Rework dev_base via list_head (v3)")
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/aoe/aoecmd.c | 12 ++++++------
 drivers/block/aoe/aoenet.c |  1 +
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 136dc507d0206..c2b32c53da2bb 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -420,13 +420,16 @@ aoecmd_cfg_pkts(ushort aoemajor, unsigned char aoeminor, struct sk_buff_head *qu
 	rcu_read_lock();
 	for_each_netdev_rcu(&init_net, ifp) {
 		dev_hold(ifp);
-		if (!is_aoe_netif(ifp))
-			goto cont;
+		if (!is_aoe_netif(ifp)) {
+			dev_put(ifp);
+			continue;
+		}
 
 		skb = new_skb(sizeof *h + sizeof *ch);
 		if (skb == NULL) {
 			printk(KERN_INFO "aoe: skb alloc failure\n");
-			goto cont;
+			dev_put(ifp);
+			continue;
 		}
 		skb_put(skb, sizeof *h + sizeof *ch);
 		skb->dev = ifp;
@@ -441,9 +444,6 @@ aoecmd_cfg_pkts(ushort aoemajor, unsigned char aoeminor, struct sk_buff_head *qu
 		h->major = cpu_to_be16(aoemajor);
 		h->minor = aoeminor;
 		h->cmd = AOECMD_CFG;
-
-cont:
-		dev_put(ifp);
 	}
 	rcu_read_unlock();
 }
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 63773a90581dd..1e66c7a188a12 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -64,6 +64,7 @@ tx(int id) __must_hold(&txlock)
 			pr_warn("aoe: packet could not be sent on %s.  %s\n",
 				ifp ? ifp->name : "netif",
 				"consider increasing tx_queue_len");
+		dev_put(ifp);
 		spin_lock_irq(&txlock);
 	}
 	return 0;
-- 
2.43.0

[PATCH 4.19 025/148] timekeeping: Fix cross-timestamp interpolation on counter wrap

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 84dccadd3e2a3f1a373826ad71e5ced5e76b0c00 ]

cycle_between() decides whether get_device_system_crosststamp() will
interpolate for older counter readings.

cycle_between() yields wrong results for a counter wrap-around where after
< before < test, and for the case after < test < before.

Fix the comparison logic.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20231218073849.35294-2-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 087f71183c3f2..7a306bad183bf 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1097,7 +1097,7 @@ static bool cycle_between(u64 before, u64 test, u64 after)
 {
 	if (test > before && test < after)
 		return true;
-	if (test < before && before > after)
+	if (before > after && (test > before || test < after))
 		return true;
 	return false;
 }
-- 
2.43.0

[PATCH 4.19 026/148] timekeeping: Fix cross-timestamp interpolation corner case decision

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 87a41130881995f82f7adbafbfeddaebfb35f0ef ]

The cycle_between() helper checks if parameter test is in the open interval
(before, after). Colloquially speaking, this also applies to the counter
wrap-around special case before > after. get_device_system_crosststamp()
currently uses cycle_between() at the first call site to decide whether to
interpolate for older counter readings.

get_device_system_crosststamp() has the following problem with
cycle_between() testing against an open interval: Assume that, by chance,
cycles == tk->tkr_mono.cycle_last (in the following, "cycle_last" for
brevity). Then, cycle_between() at the first call site, with effective
argument values cycle_between(cycle_last, cycles, now), returns false,
enabling interpolation. During interpolation,
get_device_system_crosststamp() will then call cycle_between() at the
second call site (if a history_begin was supplied). The effective argument
values are cycle_between(history_begin->cycles, cycles, cycles), since
system_counterval.cycles == interval_start == cycles, per the assumption.
Due to the test against the open interval, cycle_between() returns false
again. This causes get_device_system_crosststamp() to return -EINVAL.

This failure should be avoided, since get_device_system_crosststamp() works
both when cycles follows cycle_last (no interpolation), and when cycles
precedes cycle_last (interpolation). For the case cycles == cycle_last,
interpolation is actually unneeded.

Fix this by changing cycle_between() into timestamp_in_interval(), which
now checks against the closed interval, rather than the open interval.

This changes the get_device_system_crosststamp() behavior for three corner
cases:

1. Bypass interpolation in the case cycles == tk->tkr_mono.cycle_last,
   fixing the problem described above.

2. At the first timestamp_in_interval() call site, cycles == now no longer
   causes failure.

3. At the second timestamp_in_interval() call site, history_begin->cycles
   == system_counterval.cycles no longer causes failure.
   adjust_historical_crosststamp() also works for this corner case,
   where partial_history_cycles == total_history_cycles.

These behavioral changes should not cause any problems.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231218073849.35294-3-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 7a306bad183bf..ab36b20cdbec2 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1091,13 +1091,15 @@ static int adjust_historical_crosststamp(struct system_time_snapshot *history,
 }
 
 /*
- * cycle_between - true if test occurs chronologically between before and after
+ * timestamp_in_interval - true if ts is chronologically in [start, end]
+ *
+ * True if ts occurs chronologically at or after start, and before or at end.
  */
-static bool cycle_between(u64 before, u64 test, u64 after)
+static bool timestamp_in_interval(u64 start, u64 end, u64 ts)
 {
-	if (test > before && test < after)
+	if (ts >= start && ts <= end)
 		return true;
-	if (before > after && (test > before || test < after))
+	if (start > end && (ts >= start || ts <= end))
 		return true;
 	return false;
 }
@@ -1157,7 +1159,7 @@ int get_device_system_crosststamp(int (*get_time_fn)
 		 */
 		now = tk_clock_read(&tk->tkr_mono);
 		interval_start = tk->tkr_mono.cycle_last;
-		if (!cycle_between(interval_start, cycles, now)) {
+		if (!timestamp_in_interval(interval_start, now, cycles)) {
 			clock_was_set_seq = tk->clock_was_set_seq;
 			cs_was_changed_seq = tk->cs_was_changed_seq;
 			cycles = interval_start;
@@ -1188,13 +1190,13 @@ int get_device_system_crosststamp(int (*get_time_fn)
 		bool discontinuity;
 
 		/*
-		 * Check that the counter value occurs after the provided
+		 * Check that the counter value is not before the provided
 		 * history reference and that the history doesn't cross a
 		 * clocksource change
 		 */
 		if (!history_begin ||
-		    !cycle_between(history_begin->cycles,
-				   system_counterval.cycles, cycles) ||
+		    !timestamp_in_interval(history_begin->cycles,
+					   cycles, system_counterval.cycles) ||
 		    history_begin->cs_was_changed_seq != cs_was_changed_seq)
 			return -EINVAL;
 		partial_history_cycles = cycles - system_counterval.cycles;
-- 
2.43.0

[PATCH 4.19 027/148] timekeeping: Fix cross-timestamp interpolation for non-x86

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 14274d0bd31b4debf28284604589f596ad2e99f2 ]

So far, get_device_system_crosststamp() unconditionally passes
system_counterval.cycles to timekeeping_cycles_to_ns(). But when
interpolating system time (do_interp == true), system_counterval.cycles is
before tkr_mono.cycle_last, contrary to the timekeeping_cycles_to_ns()
expectations.

On x86, CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE will mitigate on
interpolating, setting delta to 0. With delta == 0, xtstamp->sys_monoraw
and xtstamp->sys_realtime are then set to the last update time, as
implicitly expected by adjust_historical_crosststamp(). On other
architectures, the resulting nonsense xtstamp->sys_monoraw and
xtstamp->sys_realtime corrupt the xtstamp (ts) adjustment in
adjust_historical_crosststamp().

Fix this by deriving xtstamp->sys_monoraw and xtstamp->sys_realtime from
the last update time when interpolating, by using the local variable
"cycles". The local variable already has the right value when
interpolating, unlike system_counterval.cycles.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20231218073849.35294-4-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index ab36b20cdbec2..e43706e2c038f 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1172,10 +1172,8 @@ int get_device_system_crosststamp(int (*get_time_fn)
 				      tk_core.timekeeper.offs_real);
 		base_raw = tk->tkr_raw.base;
 
-		nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono,
-						     system_counterval.cycles);
-		nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw,
-						    system_counterval.cycles);
+		nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono, cycles);
+		nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw, cycles);
 	} while (read_seqcount_retry(&tk_core.seq, seq));
 
 	xtstamp->sys_realtime = ktime_add_ns(base_real, nsec_real);
-- 
2.43.0

[PATCH 4.19 028/148] wifi: ath10k: fix NULL pointer dereference in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev()

[Sasha Levin]

From: Xingyuan Mo <hdthky0@gmail.com>

[ Upstream commit ad25ee36f00172f7d53242dc77c69fff7ced0755 ]

We should check whether the WMI_TLV_TAG_STRUCT_MGMT_TX_COMPL_EVENT tlv is
present before accessing it, otherwise a null pointer deference error will
occur.

Fixes: dc405152bb64 ("ath10k: handle mgmt tx completion event")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231208043433.271449-1-hdthky0@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 243887fdb343e..c9df78950ff4b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -684,6 +684,10 @@ ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev(struct ath10k *ar, struct sk_buff *skb,
 	}
 
 	ev = tb[WMI_TLV_TAG_STRUCT_MGMT_TX_COMPL_EVENT];
+	if (!ev) {
+		kfree(tb);
+		return -EPROTO;
+	}
 
 	arg->desc_id = ev->desc_id;
 	arg->status = ev->status;
-- 
2.43.0

[PATCH 4.19 029/148] b43: dma: Fix use true/false for bool type variable

[Sasha Levin]

From: Saurav Girepunje <saurav.girepunje@gmail.com>

[ Upstream commit a9160bb35ad9ada8428a4d48426f7fc128db40cc ]

use true/false for bool type variables assignment.

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Stable-dep-of: 9636951e4468 ("wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/dma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/dma.c b/drivers/net/wireless/broadcom/b43/dma.c
index 06139835055fa..cd809d5e46791 100644
--- a/drivers/net/wireless/broadcom/b43/dma.c
+++ b/drivers/net/wireless/broadcom/b43/dma.c
@@ -1462,7 +1462,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		/* This TX ring is full. */
 		unsigned int skb_mapping = skb_get_queue_mapping(skb);
 		ieee80211_stop_queue(dev->wl->hw, skb_mapping);
-		dev->wl->tx_queue_stopped[skb_mapping] = 1;
+		dev->wl->tx_queue_stopped[skb_mapping] = true;
 		ring->stopped = true;
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
 			b43dbg(dev->wl, "Stopped TX ring %d\n", ring->index);
@@ -1628,7 +1628,7 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	}
 
 	if (dev->wl->tx_queue_stopped[ring->queue_prio]) {
-		dev->wl->tx_queue_stopped[ring->queue_prio] = 0;
+		dev->wl->tx_queue_stopped[ring->queue_prio] = false;
 	} else {
 		/* If the driver queue is running wake the corresponding
 		 * mac80211 queue. */
-- 
2.43.0

[PATCH 4.19 030/148] wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 9636951e4468f02c72cc75a82dc65d003077edbc ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS
is disabled to prevent trying to stop/wake a non-existent queue and failing
to stop/wake the actual queue instantiated.

Log of issue before change (with kernel parameter qos=0):
    [  +5.112651] ------------[ cut here ]------------
    [  +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3
    [  +0.000044]  videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common
    [  +0.000055]  usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)]
    [  +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G        W  O       6.6.7 #1-NixOS
    [  +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019
    [  +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00
    [  +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097
    [  +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000
    [  +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900
    [  +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0
    [  +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000
    [  +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40
    [  +0.000001] FS:  0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000
    [  +0.000001] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  +0.000001] CR2: 00007fafda7ae008 CR3: 000000046d220005 CR4: 00000000000606e0
    [  +0.000002] Call Trace:
    [  +0.000003]  <TASK>
    [  +0.000001]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000044]  ? __warn+0x81/0x130
    [  +0.000005]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000045]  ? report_bug+0x171/0x1a0
    [  +0.000004]  ? handle_bug+0x41/0x70
    [  +0.000004]  ? exc_invalid_op+0x17/0x70
    [  +0.000003]  ? asm_exc_invalid_op+0x1a/0x20
    [  +0.000005]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000043]  ieee80211_wake_queue+0x4a/0x80 [mac80211]
    [  +0.000044]  b43_dma_handle_txstatus+0x29c/0x3a0 [b43]
    [  +0.000016]  ? __pfx_irq_thread_fn+0x10/0x10
    [  +0.000002]  b43_handle_txstatus+0x61/0x80 [b43]
    [  +0.000012]  b43_interrupt_thread_handler+0x3f9/0x6b0 [b43]
    [  +0.000011]  irq_thread_fn+0x23/0x60
    [  +0.000002]  irq_thread+0xfe/0x1c0
    [  +0.000002]  ? __pfx_irq_thread_dtor+0x10/0x10
    [  +0.000001]  ? __pfx_irq_thread+0x10/0x10
    [  +0.000001]  kthread+0xe8/0x120
    [  +0.000003]  ? __pfx_kthread+0x10/0x10
    [  +0.000003]  ret_from_fork+0x34/0x50
    [  +0.000002]  ? __pfx_kthread+0x10/0x10
    [  +0.000002]  ret_from_fork_asm+0x1b/0x30
    [  +0.000004]  </TASK>
    [  +0.000001] ---[ end trace 0000000000000000 ]---

    [  +0.000065] ------------[ cut here ]------------
    [  +0.000001] WARNING: CPU: 0 PID: 56077 at net/mac80211/util.c:514 __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000077] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3
    [  +0.000073]  videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common
    [  +0.000084]  usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43]
    [  +0.000012] CPU: 0 PID: 56077 Comm: kworker/u16:17 Tainted: G        W  O       6.6.7 #1-NixOS
    [  +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019
    [  +0.000001] Workqueue: phy7 b43_tx_work [b43]
    [  +0.000019] RIP: 0010:__ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000076] Code: 74 11 48 8b 78 08 0f b7 d6 89 e9 4c 89 e6 e8 ab f4 00 00 65 ff 0d 9c b7 34 3f 0f 85 55 ff ff ff 0f 1f 44 00 00 e9 4b ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90
    [  +0.000002] RSP: 0000:ffffc90004157d50 EFLAGS: 00010097
    [  +0.000002] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000
    [  +0.000002] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8882d65d0900
    [  +0.000002] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
    [  +0.000001] R10: 00000000000000ff R11: ffff88814d0155a0 R12: ffff8882d65d0900
    [  +0.000002] R13: 0000000000000000 R14: ffff8881002d2800 R15: 00000000000000d0
    [  +0.000002] FS:  0000000000000000(0000) GS:ffff88846f800000(0000) knlGS:0000000000000000
    [  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  +0.000002] CR2: 00007f2e8c10c880 CR3: 0000000385b66005 CR4: 00000000000606f0
    [  +0.000002] Call Trace:
    [  +0.000001]  <TASK>
    [  +0.000001]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000075]  ? __warn+0x81/0x130
    [  +0.000004]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000075]  ? report_bug+0x171/0x1a0
    [  +0.000005]  ? handle_bug+0x41/0x70
    [  +0.000003]  ? exc_invalid_op+0x17/0x70
    [  +0.000004]  ? asm_exc_invalid_op+0x1a/0x20
    [  +0.000004]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000076]  ieee80211_stop_queue+0x36/0x50 [mac80211]
    [  +0.000077]  b43_dma_tx+0x550/0x780 [b43]
    [  +0.000023]  b43_tx_work+0x90/0x130 [b43]
    [  +0.000018]  process_one_work+0x174/0x340
    [  +0.000003]  worker_thread+0x27b/0x3a0
    [  +0.000004]  ? __pfx_worker_thread+0x10/0x10
    [  +0.000002]  kthread+0xe8/0x120
    [  +0.000003]  ? __pfx_kthread+0x10/0x10
    [  +0.000004]  ret_from_fork+0x34/0x50
    [  +0.000002]  ? __pfx_kthread+0x10/0x10
    [  +0.000003]  ret_from_fork_asm+0x1b/0x30
    [  +0.000006]  </TASK>
    [  +0.000001] ---[ end trace 0000000000000000 ]---

Fixes: e6f5b934fba8 ("b43: Add QOS support")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-2-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/b43.h | 16 ++++++++++++++++
 drivers/net/wireless/broadcom/b43/dma.c |  4 ++--
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/b43.h b/drivers/net/wireless/broadcom/b43/b43.h
index a449561fccf28..f6bf07dfb7488 100644
--- a/drivers/net/wireless/broadcom/b43/b43.h
+++ b/drivers/net/wireless/broadcom/b43/b43.h
@@ -1082,6 +1082,22 @@ static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
 	return dev->__using_pio_transfers;
 }
 
+static inline void b43_wake_queue(struct b43_wldev *dev, int queue_prio)
+{
+	if (dev->qos_enabled)
+		ieee80211_wake_queue(dev->wl->hw, queue_prio);
+	else
+		ieee80211_wake_queue(dev->wl->hw, 0);
+}
+
+static inline void b43_stop_queue(struct b43_wldev *dev, int queue_prio)
+{
+	if (dev->qos_enabled)
+		ieee80211_stop_queue(dev->wl->hw, queue_prio);
+	else
+		ieee80211_stop_queue(dev->wl->hw, 0);
+}
+
 /* Message printing */
 __printf(2, 3) void b43info(struct b43_wl *wl, const char *fmt, ...);
 __printf(2, 3) void b43err(struct b43_wl *wl, const char *fmt, ...);
diff --git a/drivers/net/wireless/broadcom/b43/dma.c b/drivers/net/wireless/broadcom/b43/dma.c
index cd809d5e46791..8a3806aec5ee8 100644
--- a/drivers/net/wireless/broadcom/b43/dma.c
+++ b/drivers/net/wireless/broadcom/b43/dma.c
@@ -1461,7 +1461,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	    should_inject_overflow(ring)) {
 		/* This TX ring is full. */
 		unsigned int skb_mapping = skb_get_queue_mapping(skb);
-		ieee80211_stop_queue(dev->wl->hw, skb_mapping);
+		b43_stop_queue(dev, skb_mapping);
 		dev->wl->tx_queue_stopped[skb_mapping] = true;
 		ring->stopped = true;
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
@@ -1632,7 +1632,7 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	} else {
 		/* If the driver queue is running wake the corresponding
 		 * mac80211 queue. */
-		ieee80211_wake_queue(dev->wl->hw, ring->queue_prio);
+		b43_wake_queue(dev, ring->queue_prio);
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
 			b43dbg(dev->wl, "Woke up TX ring %d\n", ring->index);
 		}
-- 
2.43.0

[PATCH 4.19 031/148] wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 77135a38f6c2f950d2306ac3d37cbb407e6243f2 ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS
is disabled to prevent trying to stop/wake a non-existent queue and failing
to stop/wake the actual queue instantiated.

Fixes: 5100d5ac81b9 ("b43: Add PIO support for PCMCIA devices")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-3-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/pio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/pio.c b/drivers/net/wireless/broadcom/b43/pio.c
index a4ff5e2a42b95..b5126edcdc803 100644
--- a/drivers/net/wireless/broadcom/b43/pio.c
+++ b/drivers/net/wireless/broadcom/b43/pio.c
@@ -538,7 +538,7 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	if (total_len > (q->buffer_size - q->buffer_used)) {
 		/* Not enough memory on the queue. */
 		err = -EBUSY;
-		ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
+		b43_stop_queue(dev, skb_get_queue_mapping(skb));
 		q->stopped = true;
 		goto out;
 	}
@@ -565,7 +565,7 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	if (((q->buffer_size - q->buffer_used) < roundup(2 + 2 + 6, 4)) ||
 	    (q->free_packet_slots == 0)) {
 		/* The queue is full. */
-		ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
+		b43_stop_queue(dev, skb_get_queue_mapping(skb));
 		q->stopped = true;
 	}
 
@@ -600,7 +600,7 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev,
 	list_add(&pack->list, &q->packets_list);
 
 	if (q->stopped) {
-		ieee80211_wake_queue(dev->wl->hw, q->queue_prio);
+		b43_wake_queue(dev, q->queue_prio);
 		q->stopped = false;
 	}
 }
-- 
2.43.0

[PATCH 4.19 032/148] b43: main: Fix use true/false for bool type

[Sasha Levin]

From: Saurav Girepunje <saurav.girepunje@gmail.com>

[ Upstream commit 6db774c1725059f98e4fce97f878688248584be5 ]

use true/false on bool type variable assignment.

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Stable-dep-of: 581c8967d66c ("wifi: b43: Stop correct queue in DMA worker when QoS is disabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index 8a226a9d755e2..9a3563de60a77 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -3625,7 +3625,7 @@ static void b43_tx_work(struct work_struct *work)
 			else
 				err = b43_dma_tx(dev, skb);
 			if (err == -ENOSPC) {
-				wl->tx_queue_stopped[queue_num] = 1;
+				wl->tx_queue_stopped[queue_num] = true;
 				ieee80211_stop_queue(wl->hw, queue_num);
 				skb_queue_head(&wl->tx_queue[queue_num], skb);
 				break;
@@ -3636,7 +3636,7 @@ static void b43_tx_work(struct work_struct *work)
 		}
 
 		if (!err)
-			wl->tx_queue_stopped[queue_num] = 0;
+			wl->tx_queue_stopped[queue_num] = false;
 	}
 
 #if B43_DEBUG
@@ -5630,7 +5630,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 	/* Initialize queues and flags. */
 	for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) {
 		skb_queue_head_init(&wl->tx_queue[queue_num]);
-		wl->tx_queue_stopped[queue_num] = 0;
+		wl->tx_queue_stopped[queue_num] = false;
 	}
 
 	snprintf(chip_name, ARRAY_SIZE(chip_name),
-- 
2.43.0

[PATCH 4.19 033/148] wifi: b43: Stop correct queue in DMA worker when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 581c8967d66c4961076dbbee356834e9c6777184 ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop queue 0 when QoS is
disabled to prevent trying to stop a non-existent queue and failing to stop
the actual queue instantiated.

Fixes: bad691946966 ("b43: avoid packet losses in the dma worker code.")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-4-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index 9a3563de60a77..8d50ebdbeb1e5 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -3626,7 +3626,7 @@ static void b43_tx_work(struct work_struct *work)
 				err = b43_dma_tx(dev, skb);
 			if (err == -ENOSPC) {
 				wl->tx_queue_stopped[queue_num] = true;
-				ieee80211_stop_queue(wl->hw, queue_num);
+				b43_stop_queue(dev, queue_num);
 				skb_queue_head(&wl->tx_queue[queue_num], skb);
 				break;
 			}
@@ -3650,6 +3650,7 @@ static void b43_op_tx(struct ieee80211_hw *hw,
 		      struct sk_buff *skb)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
+	u16 skb_queue_mapping;
 
 	if (unlikely(skb->len < 2 + 2 + 6)) {
 		/* Too short, this can't be a valid frame. */
@@ -3658,12 +3659,12 @@ static void b43_op_tx(struct ieee80211_hw *hw,
 	}
 	B43_WARN_ON(skb_shinfo(skb)->nr_frags);
 
-	skb_queue_tail(&wl->tx_queue[skb->queue_mapping], skb);
-	if (!wl->tx_queue_stopped[skb->queue_mapping]) {
+	skb_queue_mapping = skb_get_queue_mapping(skb);
+	skb_queue_tail(&wl->tx_queue[skb_queue_mapping], skb);
+	if (!wl->tx_queue_stopped[skb_queue_mapping])
 		ieee80211_queue_work(wl->hw, &wl->tx_work);
-	} else {
-		ieee80211_stop_queue(wl->hw, skb->queue_mapping);
-	}
+	else
+		b43_stop_queue(wl->current_dev, skb_queue_mapping);
 }
 
 static void b43_qos_params_upload(struct b43_wldev *dev,
-- 
2.43.0

[PATCH 4.19 034/148] wifi: b43: Disable QoS for bcm4331

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 09795bded2e725443fe4a4803cae2079cdaf7b26 ]

bcm4331 seems to not function correctly with QoS support. This may be due
to issues with currently available firmware or potentially a device
specific issue.

When queues that are not of the default "best effort" priority are
selected, traffic appears to not transmit out of the hardware while no
errors are returned. This behavior is present among all the other priority
queues: video, voice, and background. While this can be worked around by
setting a kernel parameter, the default behavior is problematic for most
users and may be difficult to debug. This patch offers a working out-of-box
experience for bcm4331 users.

Log of the issue (using ssh low-priority traffic as an example):
    ssh -T -vvvv git@github.com
    OpenSSH_9.6p1, OpenSSL 3.0.12 24 Oct 2023
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug2: checking match for 'host * exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'"' host github.com originally github.com
    debug3: /etc/ssh/ssh_config line 5: matched 'host "github.com"'
    debug1: Executing command: '/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1''
    debug3: command returned status 0
    debug3: /etc/ssh/ssh_config line 5: matched 'exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0r"'
    debug2: match found
    debug1: /etc/ssh/ssh_config line 9: Applying options for *
    debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/binary-eater/.ssh/known_hosts'
    debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/binary-eater/.ssh/known_hosts2'
    debug2: resolving "github.com" port 22
    debug3: resolve_host: lookup github.com:22
    debug3: channel_clear_timeouts: clearing
    debug3: ssh_connect_direct: entering
    debug1: Connecting to github.com [192.30.255.113] port 22.
    debug3: set_sock_tos: set socket 3 IP_TOS 0x48

Fixes: e6f5b934fba8 ("b43: Add QOS support")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-5-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index 8d50ebdbeb1e5..6d18c01b18dd7 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -2605,7 +2605,8 @@ static void b43_request_firmware(struct work_struct *work)
 
 start_ieee80211:
 	wl->hw->queues = B43_QOS_QUEUE_NUM;
-	if (!modparam_qos || dev->fw.opensource)
+	if (!modparam_qos || dev->fw.opensource ||
+	    dev->dev->chip_id == BCMA_CHIP_ID_BCM4331)
 		wl->hw->queues = 1;
 
 	err = ieee80211_register_hw(wl->hw);
-- 
2.43.0

[PATCH 4.19 035/148] wifi: mwifiex: debugfs: Drop unnecessary error check for debugfs_create_dir()

[Sasha Levin]

From: Jinjie Ruan <ruanjinjie@huawei.com>

[ Upstream commit 50180c7f8e3de7c2d87f619131776598fcb1478d ]

debugfs_create_dir() returns ERR_PTR and never return NULL.

As Russell suggested, this patch removes the error checking for
debugfs_create_dir(). This is because the DebugFS kernel API is developed
in a way that the caller can safely ignore the errors that occur during
the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in
start_creating() which can handle it gracefully. So these checks are
unnecessary.

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20230903030216.1509013-3-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/debugfs.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/debugfs.c b/drivers/net/wireless/marvell/mwifiex/debugfs.c
index 0f62da50e11a2..63af04202d75f 100644
--- a/drivers/net/wireless/marvell/mwifiex/debugfs.c
+++ b/drivers/net/wireless/marvell/mwifiex/debugfs.c
@@ -977,9 +977,6 @@ mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
 	priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name,
 					       mwifiex_dfs_dir);
 
-	if (!priv->dfs_dev_dir)
-		return;
-
 	MWIFIEX_DFS_ADD_FILE(info);
 	MWIFIEX_DFS_ADD_FILE(debug);
 	MWIFIEX_DFS_ADD_FILE(getlog);
-- 
2.43.0

[PATCH 4.19 036/148] ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 090c4094574705b0afc7d37825cdc5d06f0e7e02 ]

External clocks should be defined as zero-Hz clocks in the SoC .dtsi,
and overridden in the board .dts when present.

Correct the clock rate of extal1 from 25 to 26 MHz, to match the crystal
oscillator present on the APE6-EVM board.

Fixes: a76809a329d6ebae ("ARM: shmobile: r8a73a4: Common clock framework DT description")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1692bc8cd465d62168cbf110522ad62a7af3f606.1705315614.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/r8a73a4-ape6evm.dts | 12 ++++++++++++
 arch/arm/boot/dts/r8a73a4.dtsi        |  9 ++++++---
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index d530f451467e2..c077a7c1874a6 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -184,6 +184,18 @@ &cmt1 {
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4447f45f0cba9..48121ef690c9d 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -494,17 +494,20 @@ clocks {
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
-- 
2.43.0

[PATCH 4.19 037/148] cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value

[Sasha Levin]

From: Anastasia Belova <abelova@astralinux.ru>

[ Upstream commit f661017e6d326ee187db24194cabb013d81bc2a6 ]

cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return 0 in case of error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/brcmstb-avs-cpufreq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index 541486217984b..1302e1900dcb1 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -457,6 +457,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
 static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	if (!policy)
+		return 0;
 	struct private_data *priv = policy->driver_data;
 
 	return brcm_avs_get_frequency(priv->base);
-- 
2.43.0

[PATCH 4.19 038/148] sock_diag: annotate data-races around sock_diag_handlers[family]

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit efd402537673f9951992aea4ef0f5ff51d858f4b ]

__sock_diag_cmd() and sock_diag_bind() read sock_diag_handlers[family]
without a lock held.

Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.

Fixes: 8ef874bfc729 ("sock_diag: Move the sock_ code to net/core/")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock_diag.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/core/sock_diag.c b/net/core/sock_diag.c
index 3312a5849a974..980a2d4650628 100644
--- a/net/core/sock_diag.c
+++ b/net/core/sock_diag.c
@@ -187,7 +187,7 @@ int sock_diag_register(const struct sock_diag_handler *hndl)
 	if (sock_diag_handlers[hndl->family])
 		err = -EBUSY;
 	else
-		sock_diag_handlers[hndl->family] = hndl;
+		WRITE_ONCE(sock_diag_handlers[hndl->family], hndl);
 	mutex_unlock(&sock_diag_table_mutex);
 
 	return err;
@@ -203,7 +203,7 @@ void sock_diag_unregister(const struct sock_diag_handler *hnld)
 
 	mutex_lock(&sock_diag_table_mutex);
 	BUG_ON(sock_diag_handlers[family] != hnld);
-	sock_diag_handlers[family] = NULL;
+	WRITE_ONCE(sock_diag_handlers[family], NULL);
 	mutex_unlock(&sock_diag_table_mutex);
 }
 EXPORT_SYMBOL_GPL(sock_diag_unregister);
@@ -221,7 +221,7 @@ static int __sock_diag_cmd(struct sk_buff *skb, struct nlmsghdr *nlh)
 		return -EINVAL;
 	req->sdiag_family = array_index_nospec(req->sdiag_family, AF_MAX);
 
-	if (sock_diag_handlers[req->sdiag_family] == NULL)
+	if (READ_ONCE(sock_diag_handlers[req->sdiag_family]) == NULL)
 		sock_load_diag_module(req->sdiag_family, 0);
 
 	mutex_lock(&sock_diag_table_mutex);
@@ -280,12 +280,12 @@ static int sock_diag_bind(struct net *net, int group)
 	switch (group) {
 	case SKNLGRP_INET_TCP_DESTROY:
 	case SKNLGRP_INET_UDP_DESTROY:
-		if (!sock_diag_handlers[AF_INET])
+		if (!READ_ONCE(sock_diag_handlers[AF_INET]))
 			sock_load_diag_module(AF_INET, 0);
 		break;
 	case SKNLGRP_INET6_TCP_DESTROY:
 	case SKNLGRP_INET6_UDP_DESTROY:
-		if (!sock_diag_handlers[AF_INET6])
+		if (!READ_ONCE(sock_diag_handlers[AF_INET6]))
 			sock_load_diag_module(AF_INET6, 0);
 		break;
 	}
-- 
2.43.0

[PATCH 4.19 039/148] af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().

[Sasha Levin]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 31e03207119a535d0b0e3b3a7f91983aeb2cb14d ]

gc_in_progress is changed under spin_lock(&unix_gc_lock),
but wait_for_unix_gc() reads it locklessly.

Let's use READ_ONCE().

Fixes: 5f23b734963e ("net: Fix soft lockups/OOM issues w/ unix garbage collector")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240123170856.41348-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/garbage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 4d283e26d8162..0a212422b513c 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -203,7 +203,7 @@ void wait_for_unix_gc(void)
 	if (READ_ONCE(unix_tot_inflight) > UNIX_INFLIGHT_TRIGGER_GC &&
 	    !READ_ONCE(gc_in_progress))
 		unix_gc();
-	wait_event(unix_gc_wait, gc_in_progress == false);
+	wait_event(unix_gc_wait, !READ_ONCE(gc_in_progress));
 }
 
 /* The external entry point: unix_gc() */
-- 
2.43.0

[PATCH 4.19 040/148] wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 5f0e4aede01cb01fa633171f0533affd25328c3a ]

In the for statement of lbs_allocate_cmd_buffer(), if the allocation of
cmdarray[i].cmdbuf fails, both cmdarray and cmdarray[i].cmdbuf needs to
be freed. Otherwise, there will be memleaks in lbs_allocate_cmd_buffer().

Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126075336.2825608-1-alexious@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/libertas/cmd.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/marvell/libertas/cmd.c b/drivers/net/wireless/marvell/libertas/cmd.c
index c1f4229187378..d1984f03fdfca 100644
--- a/drivers/net/wireless/marvell/libertas/cmd.c
+++ b/drivers/net/wireless/marvell/libertas/cmd.c
@@ -1132,7 +1132,7 @@ int lbs_allocate_cmd_buffer(struct lbs_private *priv)
 		if (!cmdarray[i].cmdbuf) {
 			lbs_deb_host("ALLOC_CMD_BUF: ptempvirtualaddr is NULL\n");
 			ret = -1;
-			goto done;
+			goto free_cmd_array;
 		}
 	}
 
@@ -1140,8 +1140,17 @@ int lbs_allocate_cmd_buffer(struct lbs_private *priv)
 		init_waitqueue_head(&cmdarray[i].cmdwait_q);
 		lbs_cleanup_and_insert_cmd(priv, &cmdarray[i]);
 	}
-	ret = 0;
+	return 0;
 
+free_cmd_array:
+	for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
+		if (cmdarray[i].cmdbuf) {
+			kfree(cmdarray[i].cmdbuf);
+			cmdarray[i].cmdbuf = NULL;
+		}
+	}
+	kfree(priv->cmd_array);
+	priv->cmd_array = NULL;
 done:
 	return ret;
 }
-- 
2.43.0

[PATCH 4.19 041/148] ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit e18afcb7b2a12b635ac10081f943fcf84ddacc51 ]

After unregistering the CPU idle device, the memory associated with
it is not freed, leading to a memory leak:

unreferenced object 0xffff896282f6c000 (size 1024):
  comm "swapper/0", pid 1, jiffies 4294893170
  hex dump (first 32 bytes):
    00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 8836a742):
    [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
    [<ffffffff9972f3b3>] acpi_processor_power_init+0xf3/0x1c0
    [<ffffffff9972d263>] __acpi_processor_start+0xd3/0xf0
    [<ffffffff9972d2bc>] acpi_processor_start+0x2c/0x50
    [<ffffffff99805872>] really_probe+0xe2/0x480
    [<ffffffff99805c98>] __driver_probe_device+0x78/0x160
    [<ffffffff99805daf>] driver_probe_device+0x1f/0x90
    [<ffffffff9980601e>] __driver_attach+0xce/0x1c0
    [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
    [<ffffffff99804822>] bus_add_driver+0x112/0x210
    [<ffffffff99807245>] driver_register+0x55/0x100
    [<ffffffff9aee4acb>] acpi_processor_driver_init+0x3b/0xc0
    [<ffffffff990012d1>] do_one_initcall+0x41/0x300
    [<ffffffff9ae7c4b0>] kernel_init_freeable+0x320/0x470
    [<ffffffff99b231f6>] kernel_init+0x16/0x1b0
    [<ffffffff99042e6d>] ret_from_fork+0x2d/0x50

Fix this by freeing the CPU idle device after unregistering it.

Fixes: 3d339dcbb56d ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/processor_idle.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index d80010ac2a43a..22b56a6e9ccac 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1530,6 +1530,8 @@ int acpi_processor_power_exit(struct acpi_processor *pr)
 		acpi_processor_registered--;
 		if (acpi_processor_registered == 0)
 			cpuidle_unregister_driver(&acpi_idle_driver);
+
+		kfree(dev);
 	}
 
 	pr->flags.power_setup_done = 0;
-- 
2.43.0

[PATCH 4.19 042/148] bus: tegra-aconnect: Update dependency to ARCH_TEGRA

[Sasha Levin]

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 4acd21a45c1446277e2abaece97d7fa7c2e692a9 ]

Update the architecture dependency to be the generic Tegra
because the driver works on the four latest Tegra generations
not just Tegra210, if you build a kernel with a specific
ARCH_TEGRA_xxx_SOC option that excludes Tegra210 you don't get
this driver.

Fixes: 46a88534afb59 ("bus: Add support for Tegra ACONNECT")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/Kconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 1851112ccc294..02ef3399bf810 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -126,12 +126,13 @@ config SUNXI_RSB
 
 config TEGRA_ACONNECT
 	tristate "Tegra ACONNECT Bus Driver"
-	depends on ARCH_TEGRA_210_SOC
+	depends on ARCH_TEGRA
 	depends on OF && PM
 	select PM_CLK
 	help
 	  Driver for the Tegra ACONNECT bus which is used to interface with
-	  the devices inside the Audio Processing Engine (APE) for Tegra210.
+	  the devices inside the Audio Processing Engine (APE) for
+	  Tegra210 and later.
 
 config TEGRA_GMI
 	tristate "Tegra Generic Memory Interface bus driver"
-- 
2.43.0

[PATCH 4.19 043/148] iommu/amd: Mark interrupt as managed

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 0feda94c868d396fac3b3cb14089d2d989a07c72 ]

On many systems that have an AMD IOMMU the following sequence of
warnings is observed during bootup.

```
pci 0000:00:00.2  can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
```

This series of events happens because of the IOMMU initialization
sequence order and the lack of _PRT entries for the IOMMU.

During initialization the IOMMU driver first enables the PCI device
using pci_enable_device().  This will call acpi_pci_irq_enable()
which will check if the interrupt is declared in a PCI routing table
(_PRT) entry. According to the PCI spec [1] these routing entries
are only required under PCI root bridges:
	The _PRT object is required under all PCI root bridges

The IOMMU is directly connected to the root complex, so there is no
parent bridge to look for a _PRT entry. The first warning is emitted
since no entry could be found in the hierarchy. The second warning is
then emitted because the interrupt hasn't yet been configured to any
value.  The pin was configured in pci_read_irq() but the byte in
PCI_INTERRUPT_LINE return 0xff which means "Unknown".

After that sequence of events pci_enable_msi() is called and this
will allocate an interrupt.

That is both of these warnings are totally harmless because the IOMMU
uses MSI for interrupts.  To avoid even trying to probe for a _PRT
entry mark the IOMMU as IRQ managed. This avoids both warnings.

Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html?highlight=_prt#prt-pci-routing-table [1]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: cffe0a2b5a34 ("x86, irq: Keep balance of IOAPIC pin reference count")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240122233400.1802-1-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu_init.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 12e7254b39489..efb11ca91dd72 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1733,6 +1733,9 @@ static int __init iommu_init_pci(struct amd_iommu *iommu)
 	/* Prevent binding other PCI device drivers to IOMMU devices */
 	iommu->dev->match_driver = false;
 
+	/* ACPI _PRT won't have an IRQ for IOMMU */
+	iommu->dev->irq_managed = 1;
+
 	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
 			      &iommu->cap);
 	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
-- 
2.43.0

[PATCH 4.19 044/148] wifi: brcmsmac: avoid function pointer casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit e1ea6db35fc3ba5ff063f097385e9f7a88c25356 ]

An old cleanup went a little too far and causes a warning with clang-16
and higher as it breaks control flow integrity (KCFI) rules:

drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c:64:34: error: cast from 'void (*)(struct brcms_phy *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   64 |                         brcms_init_timer(physhim->wl, (void (*)(void *))fn,
      |                                                       ^~~~~~~~~~~~~~~~~~~~

Change this one instance back to passing a void pointer so it can be
used with the timer callback interface.

Fixes: d89a4c80601d ("staging: brcm80211: removed void * from softmac phy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213100548.457854-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c   | 3 ++-
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c  | 5 ++---
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h  | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
index 35e3b101e5cf0..bedb1f73ef24e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
@@ -394,8 +394,9 @@ struct shared_phy *wlc_phy_shared_attach(struct shared_phy_params *shp)
 	return sh;
 }
 
-static void wlc_phy_timercb_phycal(struct brcms_phy *pi)
+static void wlc_phy_timercb_phycal(void *ptr)
 {
+	struct brcms_phy *pi = ptr;
 	uint delay = 5;
 
 	if (PHY_PERICAL_MPHASE_PENDING(pi)) {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
index a0de5db0cd646..b723817915365 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
@@ -57,12 +57,11 @@ void wlc_phy_shim_detach(struct phy_shim_info *physhim)
 }
 
 struct wlapi_timer *wlapi_init_timer(struct phy_shim_info *physhim,
-				     void (*fn)(struct brcms_phy *pi),
+				     void (*fn)(void *pi),
 				     void *arg, const char *name)
 {
 	return (struct wlapi_timer *)
-			brcms_init_timer(physhim->wl, (void (*)(void *))fn,
-					 arg, name);
+			brcms_init_timer(physhim->wl, fn, arg, name);
 }
 
 void wlapi_free_timer(struct wlapi_timer *t)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
index dd8774717adee..27d0934e600ed 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
@@ -131,7 +131,7 @@ void wlc_phy_shim_detach(struct phy_shim_info *physhim);
 
 /* PHY to WL utility functions */
 struct wlapi_timer *wlapi_init_timer(struct phy_shim_info *physhim,
-				     void (*fn)(struct brcms_phy *pi),
+				     void (*fn)(void *pi),
 				     void *arg, const char *name);
 void wlapi_free_timer(struct wlapi_timer *t);
 void wlapi_add_timer(struct wlapi_timer *t, uint ms, int periodic);
-- 
2.43.0

[PATCH 4.19 045/148] ARM: dts: arm: realview: Fix development chip ROM compatible value

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3baa4c5143d65ebab2de0d99a395e5f4f1f46608 ]

When the development chip ROM was added, the "direct-mapped" compatible
value was already obsolete.  In addition, the device node lacked the
accompanying "probe-type" property, causing the old physmap_of_core
driver to fall back to trying all available probe types.
Unfortunately this fallback was lost when the DT and pdata cases were
merged.

Fix this by using the modern "mtd-rom" compatible value instead.

Fixes: 5c3f5edbe0a1dff3 ("ARM: realview: add flash devices to the PB1176 DTS")
Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/arm-realview-pb1176.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 83e0fbc4a1a10..350a5dbd36130 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -427,7 +427,7 @@ pb1176_serial3: serial@1010f000 {
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
-- 
2.43.0

[PATCH 4.19 046/148] ACPI: scan: Fix device check notification handling

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 793551c965116d9dfaf0550dacae1396a20efa69 ]

It is generally invalid to fail a Device Check notification if the scan
handler has not been attached to the given device after a bus rescan,
because there may be valid reasons for the scan handler to refuse
attaching to the device (for example, the device is not ready).

For this reason, modify acpi_scan_device_check() to return 0 in that
case without printing a warning.

While at it, reduce the log level of the "already enumerated" message
in the same function, because it is only interesting when debugging
notification handling

Fixes: 443fc8202272 ("ACPI / hotplug: Rework generic code to handle suprise removals")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/scan.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 1e7e2c438acf0..60417cee19b9b 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -321,18 +321,14 @@ static int acpi_scan_device_check(struct acpi_device *adev)
 		 * again).
 		 */
 		if (adev->handler) {
-			dev_warn(&adev->dev, "Already enumerated\n");
-			return -EALREADY;
+			dev_dbg(&adev->dev, "Already enumerated\n");
+			return 0;
 		}
 		error = acpi_bus_scan(adev->handle);
 		if (error) {
 			dev_warn(&adev->dev, "Namespace scan failure\n");
 			return error;
 		}
-		if (!adev->handler) {
-			dev_warn(&adev->dev, "Enumeration failure\n");
-			error = -ENODEV;
-		}
 	} else {
 		error = acpi_scan_device_not_present(adev);
 	}
-- 
2.43.0

[PATCH 4.19 047/148] x86, relocs: Ignore relocations in .notes section

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit aaa8736370db1a78f0e8434344a484f9fd20be3b ]

When building with CONFIG_XEN_PV=y, .text symbols are emitted into
the .notes section so that Xen can find the "startup_xen" entry point.
This information is used prior to booting the kernel, so relocations
are not useful. In fact, performing relocations against the .notes
section means that the KASLR base is exposed since /sys/kernel/notes
is world-readable.

To avoid leaking the KASLR base without breaking unprivileged tools that
are expecting to read /sys/kernel/notes, skip performing relocations in
the .notes section. The values readable in .notes are then identical to
those found in System.map.

Reported-by: Guixiong Wei <guixiongwei@gmail.com>
Closes: https://lore.kernel.org/all/20240218073501.54555-1-guixiongwei@gmail.com/
Fixes: 5ead97c84fa7 ("xen: Core Xen implementation")
Fixes: da1a679cde9b ("Add /sys/kernel/notes")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/tools/relocs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index aa046d46ff8ff..c7f1d1759c855 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -579,6 +579,14 @@ static void print_absolute_relocs(void)
 		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
 			continue;
 		}
+		/*
+		 * Do not perform relocations in .notes section; any
+		 * values there are meant for pre-boot consumption (e.g.
+		 * startup_xen).
+		 */
+		if (sec_applies->shdr.sh_type == SHT_NOTE) {
+			continue;
+		}
 		sh_symtab  = sec_symtab->symtab;
 		sym_strtab = sec_symtab->link->strtab;
 		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) {
-- 
2.43.0

[PATCH 4.19 048/148] SUNRPC: fix some memleaks in gssx_dec_option_array

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 3cfcfc102a5e57b021b786a755a38935e357797d ]

The creds and oa->data need to be freed in the error-handling paths after
their allocation. So this patch add these deallocations in the
corresponding paths.

Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/gss_rpc_xdr.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/net/sunrpc/auth_gss/gss_rpc_xdr.c b/net/sunrpc/auth_gss/gss_rpc_xdr.c
index 444380f968f11..730a9c4dc9931 100644
--- a/net/sunrpc/auth_gss/gss_rpc_xdr.c
+++ b/net/sunrpc/auth_gss/gss_rpc_xdr.c
@@ -263,8 +263,8 @@ static int gssx_dec_option_array(struct xdr_stream *xdr,
 
 	creds = kzalloc(sizeof(struct svc_cred), GFP_KERNEL);
 	if (!creds) {
-		kfree(oa->data);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto free_oa;
 	}
 
 	oa->data[0].option.data = CREDS_VALUE;
@@ -278,29 +278,40 @@ static int gssx_dec_option_array(struct xdr_stream *xdr,
 
 		/* option buffer */
 		p = xdr_inline_decode(xdr, 4);
-		if (unlikely(p == NULL))
-			return -ENOSPC;
+		if (unlikely(p == NULL)) {
+			err = -ENOSPC;
+			goto free_creds;
+		}
 
 		length = be32_to_cpup(p);
 		p = xdr_inline_decode(xdr, length);
-		if (unlikely(p == NULL))
-			return -ENOSPC;
+		if (unlikely(p == NULL)) {
+			err = -ENOSPC;
+			goto free_creds;
+		}
 
 		if (length == sizeof(CREDS_VALUE) &&
 		    memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) {
 			/* We have creds here. parse them */
 			err = gssx_dec_linux_creds(xdr, creds);
 			if (err)
-				return err;
+				goto free_creds;
 			oa->data[0].value.len = 1; /* presence */
 		} else {
 			/* consume uninteresting buffer */
 			err = gssx_dec_buffer(xdr, &dummy);
 			if (err)
-				return err;
+				goto free_creds;
 		}
 	}
 	return 0;
+
+free_creds:
+	kfree(creds);
+free_oa:
+	kfree(oa->data);
+	oa->data = NULL;
+	return err;
 }
 
 static int gssx_dec_status(struct xdr_stream *xdr,
-- 
2.43.0

[PATCH 4.19 049/148] mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ae5004a40a262d329039b99b62bd3fe7645b66ad ]

This looks strange to call release_mem_region() in a remove function
without any request_mem_region() in the probe or "struct resource"
somewhere.

So remove the corresponding code.

Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/wmt-sdmmc.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
index a132bc822b5c6..b6369bfd64fd5 100644
--- a/drivers/mmc/host/wmt-sdmmc.c
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -893,7 +893,6 @@ static int wmt_mci_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
 	struct wmt_mci_priv *priv;
-	struct resource *res;
 	u32 reg_tmp;
 
 	mmc = platform_get_drvdata(pdev);
@@ -921,9 +920,6 @@ static int wmt_mci_remove(struct platform_device *pdev)
 	clk_disable_unprepare(priv->clk_sdmmc);
 	clk_put(priv->clk_sdmmc);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
 	mmc_free_host(mmc);
 
 	dev_info(&pdev->dev, "WMT MCI device removed\n");
-- 
2.43.0

[PATCH 4.19 050/148] igb: move PEROUT and EXTTS isr logic to separate functions

[Sasha Levin]

From: Ruud Bos <kernel.hbk@gmail.com>

[ Upstream commit cf99c1dd7b7729091043374b90807c7a5f9fd9b1 ]

Remove code duplication in the tsync interrupt handler function by moving
this logic to separate functions. This keeps the interrupt handler readable
and allows the new functions to be extended for adapter types other than
i210.

Signed-off-by: Ruud Bos <kernel.hbk@gmail.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: ee14cc9ea19b ("igb: Fix missing time sync events")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 81 +++++++++++++----------
 1 file changed, 46 insertions(+), 35 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 00d8f1e8177e7..c0e2323e50c6e 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6511,12 +6511,52 @@ void igb_update_stats(struct igb_adapter *adapter)
 	}
 }
 
+static void igb_perout(struct igb_adapter *adapter, int tsintr_tt)
+{
+	int pin = ptp_find_pin(adapter->ptp_clock, PTP_PF_PEROUT, tsintr_tt);
+	struct e1000_hw *hw = &adapter->hw;
+	struct timespec64 ts;
+	u32 tsauxc;
+
+	if (pin < 0 || pin >= IGB_N_PEROUT)
+		return;
+
+	spin_lock(&adapter->tmreg_lock);
+	ts = timespec64_add(adapter->perout[pin].start,
+			    adapter->perout[pin].period);
+	/* u32 conversion of tv_sec is safe until y2106 */
+	wr32((tsintr_tt == 1) ? E1000_TRGTTIML1 : E1000_TRGTTIML0, ts.tv_nsec);
+	wr32((tsintr_tt == 1) ? E1000_TRGTTIMH1 : E1000_TRGTTIMH0, (u32)ts.tv_sec);
+	tsauxc = rd32(E1000_TSAUXC);
+	tsauxc |= TSAUXC_EN_TT0;
+	wr32(E1000_TSAUXC, tsauxc);
+	adapter->perout[pin].start = ts;
+	spin_unlock(&adapter->tmreg_lock);
+}
+
+static void igb_extts(struct igb_adapter *adapter, int tsintr_tt)
+{
+	int pin = ptp_find_pin(adapter->ptp_clock, PTP_PF_EXTTS, tsintr_tt);
+	struct e1000_hw *hw = &adapter->hw;
+	struct ptp_clock_event event;
+	u32 sec, nsec;
+
+	if (pin < 0 || pin >= IGB_N_EXTTS)
+		return;
+
+	nsec = rd32((tsintr_tt == 1) ? E1000_AUXSTMPL1 : E1000_AUXSTMPL0);
+	sec  = rd32((tsintr_tt == 1) ? E1000_AUXSTMPH1 : E1000_AUXSTMPH0);
+	event.type = PTP_CLOCK_EXTTS;
+	event.index = tsintr_tt;
+	event.timestamp = sec * 1000000000ULL + nsec;
+	ptp_clock_event(adapter->ptp_clock, &event);
+}
+
 static void igb_tsync_interrupt(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
+	u32 ack = 0, tsicr = rd32(E1000_TSICR);
 	struct ptp_clock_event event;
-	struct timespec64 ts;
-	u32 ack = 0, tsauxc, sec, nsec, tsicr = rd32(E1000_TSICR);
 
 	if (tsicr & TSINTR_SYS_WRAP) {
 		event.type = PTP_CLOCK_PPS;
@@ -6532,51 +6572,22 @@ static void igb_tsync_interrupt(struct igb_adapter *adapter)
 	}
 
 	if (tsicr & TSINTR_TT0) {
-		spin_lock(&adapter->tmreg_lock);
-		ts = timespec64_add(adapter->perout[0].start,
-				    adapter->perout[0].period);
-		/* u32 conversion of tv_sec is safe until y2106 */
-		wr32(E1000_TRGTTIML0, ts.tv_nsec);
-		wr32(E1000_TRGTTIMH0, (u32)ts.tv_sec);
-		tsauxc = rd32(E1000_TSAUXC);
-		tsauxc |= TSAUXC_EN_TT0;
-		wr32(E1000_TSAUXC, tsauxc);
-		adapter->perout[0].start = ts;
-		spin_unlock(&adapter->tmreg_lock);
+		igb_perout(adapter, 0);
 		ack |= TSINTR_TT0;
 	}
 
 	if (tsicr & TSINTR_TT1) {
-		spin_lock(&adapter->tmreg_lock);
-		ts = timespec64_add(adapter->perout[1].start,
-				    adapter->perout[1].period);
-		wr32(E1000_TRGTTIML1, ts.tv_nsec);
-		wr32(E1000_TRGTTIMH1, (u32)ts.tv_sec);
-		tsauxc = rd32(E1000_TSAUXC);
-		tsauxc |= TSAUXC_EN_TT1;
-		wr32(E1000_TSAUXC, tsauxc);
-		adapter->perout[1].start = ts;
-		spin_unlock(&adapter->tmreg_lock);
+		igb_perout(adapter, 1);
 		ack |= TSINTR_TT1;
 	}
 
 	if (tsicr & TSINTR_AUTT0) {
-		nsec = rd32(E1000_AUXSTMPL0);
-		sec  = rd32(E1000_AUXSTMPH0);
-		event.type = PTP_CLOCK_EXTTS;
-		event.index = 0;
-		event.timestamp = sec * 1000000000ULL + nsec;
-		ptp_clock_event(adapter->ptp_clock, &event);
+		igb_extts(adapter, 0);
 		ack |= TSINTR_AUTT0;
 	}
 
 	if (tsicr & TSINTR_AUTT1) {
-		nsec = rd32(E1000_AUXSTMPL1);
-		sec  = rd32(E1000_AUXSTMPH1);
-		event.type = PTP_CLOCK_EXTTS;
-		event.index = 1;
-		event.timestamp = sec * 1000000000ULL + nsec;
-		ptp_clock_event(adapter->ptp_clock, &event);
+		igb_extts(adapter, 1);
 		ack |= TSINTR_AUTT1;
 	}
 
-- 
2.43.0

[PATCH 4.19 051/148] igb: Fix missing time sync events

[Sasha Levin]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

[ Upstream commit ee14cc9ea19ba9678177e2224a9c58cce5937c73 ]

Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.

The E1000_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.

The following flow was used:
    1. read E1000_TSIRC into 'tsicr';
    2. handle the interrupts present into 'tsirc' and mark them in 'ack';
    3. write 'ack' into E1000_TSICR;

As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.

Remove the extra clear in (3).

Fixes: 00c65578b47b ("igb: enable internal PPS for the i210")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 23 +++++------------------
 1 file changed, 5 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c0e2323e50c6e..5d8d5915bc276 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6555,44 +6555,31 @@ static void igb_extts(struct igb_adapter *adapter, int tsintr_tt)
 static void igb_tsync_interrupt(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u32 ack = 0, tsicr = rd32(E1000_TSICR);
+	u32 tsicr = rd32(E1000_TSICR);
 	struct ptp_clock_event event;
 
 	if (tsicr & TSINTR_SYS_WRAP) {
 		event.type = PTP_CLOCK_PPS;
 		if (adapter->ptp_caps.pps)
 			ptp_clock_event(adapter->ptp_clock, &event);
-		ack |= TSINTR_SYS_WRAP;
 	}
 
 	if (tsicr & E1000_TSICR_TXTS) {
 		/* retrieve hardware timestamp */
 		schedule_work(&adapter->ptp_tx_work);
-		ack |= E1000_TSICR_TXTS;
 	}
 
-	if (tsicr & TSINTR_TT0) {
+	if (tsicr & TSINTR_TT0)
 		igb_perout(adapter, 0);
-		ack |= TSINTR_TT0;
-	}
 
-	if (tsicr & TSINTR_TT1) {
+	if (tsicr & TSINTR_TT1)
 		igb_perout(adapter, 1);
-		ack |= TSINTR_TT1;
-	}
 
-	if (tsicr & TSINTR_AUTT0) {
+	if (tsicr & TSINTR_AUTT0)
 		igb_extts(adapter, 0);
-		ack |= TSINTR_AUTT0;
-	}
 
-	if (tsicr & TSINTR_AUTT1) {
+	if (tsicr & TSINTR_AUTT1)
 		igb_extts(adapter, 1);
-		ack |= TSINTR_AUTT1;
-	}
-
-	/* acknowledge the interrupts */
-	wr32(E1000_TSICR, ack);
 }
 
 static irqreturn_t igb_msix_other(int irq, void *data)
-- 
2.43.0

[PATCH 4.19 052/148] Bluetooth: Remove superfluous call to hci_conn_check_pending()

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit 78e3639fc8031275010c3287ac548c0bc8de83b1 ]

The "pending connections" feature was originally introduced with commit
4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") and
6bd57416127e ("[Bluetooth] Handling pending connect attempts after
inquiry") to handle controllers supporting only a single connection request
at a time. Later things were extended to also cancel ongoing inquiries on
connect() with commit 89e65975fea5 ("Bluetooth: Cancel Inquiry before
Create Connection").

With commit a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only
opcodes"), hci_conn_check_pending() was introduced as a helper to
consolidate a few places where we check for pending connections (indicated
by the BT_CONNECT2 flag) and then try to connect.

This refactoring commit also snuck in two more calls to
hci_conn_check_pending():

- One is in the failure callback of hci_cs_inquiry(), this one probably
makes sense: If we send an "HCI Inquiry" command and then immediately
after a "Create Connection" command, the "Create Connection" command might
fail before the "HCI Inquiry" command, and then we want to retry the
"Create Connection" on failure of the "HCI Inquiry".

- The other added call to hci_conn_check_pending() is in the event handler
for the "Remote Name" event, this seems unrelated and is possibly a
copy-paste error, so remove that one.

Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 4811855259267..0e9325057b3a9 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -2777,8 +2777,6 @@ static void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
 
 	BT_DBG("%s", hdev->name);
 
-	hci_conn_check_pending(hdev);
-
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
-- 
2.43.0

[PATCH 4.19 053/148] Bluetooth: hci_core: Fix possible buffer overflow

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 81137162bfaa7278785b24c1fd2e9e74f082e8e4 ]

struct hci_dev_info has a fixed size name[8] field so in the event that
hdev->name is bigger than that strcpy would attempt to write past its
size, so this fixes this problem by switching to use strscpy.

Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index f455a503f5b04..47f1eec0eb35f 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2074,7 +2074,7 @@ int hci_get_dev_info(void __user *arg)
 	else
 		flags = hdev->flags;
 
-	strcpy(di.name, hdev->name);
+	strscpy(di.name, hdev->name, sizeof(di.name));
 	di.bdaddr   = hdev->bdaddr;
 	di.type     = (hdev->bus & 0x0f) | ((hdev->dev_type & 0x03) << 4);
 	di.flags    = flags;
-- 
2.43.0

[PATCH 4.19 054/148] sr9800: Add check for usbnet_get_endpoints

[Sasha Levin]

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit 07161b2416f740a2cb87faa5566873f401440a61 ]

Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/sr9800.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c
index 8f8c9ede88c26..a5ff7df10505b 100644
--- a/drivers/net/usb/sr9800.c
+++ b/drivers/net/usb/sr9800.c
@@ -737,7 +737,9 @@ static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	data->eeprom_len = SR9800_EEPROM_LEN;
 
-	usbnet_get_endpoints(dev, intf);
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
 
 	/* LED Setting Rule :
 	 * AABB:CCDD
-- 
2.43.0

[PATCH 4.19 055/148] bpf: Fix hashtab overflow check on 32-bit arches

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 6787d916c2cf9850c97a0a3f73e08c43e7d973b1 ]

The hashtab code relies on roundup_pow_of_two() to compute the number of
hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code. So apply the same
fix to hashtab, by moving the overflow check to before the roundup.

Fixes: daaf427c6ab3 ("bpf: fix arraymap NULL deref and missing overflow and zero size checks")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240307120340.99577-3-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/hashtab.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 8e379b667a0f7..16081d8384bfc 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -330,7 +330,13 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr)
 							  num_possible_cpus());
 	}
 
-	/* hash table size must be power of 2 */
+	/* hash table size must be power of 2; roundup_pow_of_two() can overflow
+	 * into UB on 32-bit arches, so check that first
+	 */
+	err = -E2BIG;
+	if (htab->map.max_entries > 1UL << 31)
+		goto free_htab;
+
 	htab->n_buckets = roundup_pow_of_two(htab->map.max_entries);
 
 	htab->elem_size = sizeof(struct htab_elem) +
@@ -340,10 +346,8 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr)
 	else
 		htab->elem_size += round_up(htab->map.value_size, 8);
 
-	err = -E2BIG;
-	/* prevent zero size kmalloc and check for u32 overflow */
-	if (htab->n_buckets == 0 ||
-	    htab->n_buckets > U32_MAX / sizeof(struct bucket))
+	/* check for u32 overflow */
+	if (htab->n_buckets > U32_MAX / sizeof(struct bucket))
 		goto free_htab;
 
 	cost = (u64) htab->n_buckets * sizeof(struct bucket) +
-- 
2.43.0

[PATCH 4.19 056/148] bpf: Fix stackmap overflow check on 32-bit arches

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 7a4b21250bf79eef26543d35bd390448646c536b ]

The stackmap code relies on roundup_pow_of_two() to compute the number
of hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code.

The commit in the fixes tag actually attempted to fix this, but the fix
did not account for the UB, so the fix only works on CPUs where an
overflow does result in a neat truncation to zero, which is not
guaranteed. Checking the value before rounding does not have this
problem.

Fixes: 6183f4d3a0a2 ("bpf: Check for integer overflow when using roundup_pow_of_two()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-ID: <20240307120340.99577-4-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/stackmap.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index 92310b07cb98e..a41858db14416 100644
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -113,11 +113,14 @@ static struct bpf_map *stack_map_alloc(union bpf_attr *attr)
 	} else if (value_size / 8 > sysctl_perf_event_max_stack)
 		return ERR_PTR(-EINVAL);
 
-	/* hash table size must be power of 2 */
-	n_buckets = roundup_pow_of_two(attr->max_entries);
-	if (!n_buckets)
+	/* hash table size must be power of 2; roundup_pow_of_two() can overflow
+	 * into UB on 32-bit arches, so check that first
+	 */
+	if (attr->max_entries > 1UL << 31)
 		return ERR_PTR(-E2BIG);
 
+	n_buckets = roundup_pow_of_two(attr->max_entries);
+
 	cost = n_buckets * sizeof(struct stack_map_bucket *) + sizeof(*smap);
 	if (cost >= U32_MAX - PAGE_SIZE)
 		return ERR_PTR(-E2BIG);
-- 
2.43.0

[PATCH 4.19 057/148] ipv6: fib6_rules: flush route cache when rule is changed

[Sasha Levin]

From: Shiming Cheng <shiming.cheng@mediatek.com>

[ Upstream commit c4386ab4f6c600f75fdfd21143f89bac3e625d0d ]

When rule policy is changed, ipv6 socket cache is not refreshed.
The sock's skb still uses a outdated route cache and was sent to
a wrong interface.

To avoid this error we should update fib node's version when
rule is changed. Then skb's route will be reroute checked as
route cache version is already different with fib node version.
The route cache is refreshed to match the latest rule.

Fixes: 101367c2f8c4 ("[IPV6]: Policy Routing Rules")
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Signed-off-by: Lena Wang <lena.wang@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/fib6_rules.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index f590446595d8b..1913801f4273c 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -437,6 +437,11 @@ static size_t fib6_rule_nlmsg_payload(struct fib_rule *rule)
 	       + nla_total_size(16); /* src */
 }
 
+static void fib6_rule_flush_cache(struct fib_rules_ops *ops)
+{
+	rt_genid_bump_ipv6(ops->fro_net);
+}
+
 static const struct fib_rules_ops __net_initconst fib6_rules_ops_template = {
 	.family			= AF_INET6,
 	.rule_size		= sizeof(struct fib6_rule),
@@ -449,6 +454,7 @@ static const struct fib_rules_ops __net_initconst fib6_rules_ops_template = {
 	.compare		= fib6_rule_compare,
 	.fill			= fib6_rule_fill,
 	.nlmsg_payload		= fib6_rule_nlmsg_payload,
+	.flush_cache		= fib6_rule_flush_cache,
 	.nlgroup		= RTNLGRP_IPV6_RULE,
 	.policy			= fib6_rule_policy,
 	.owner			= THIS_MODULE,
-- 
2.43.0

[PATCH 4.19 058/148] tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 716edc9706deb3bb2ff56e2eeb83559cea8f22db ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 712186336997b..3df973d22295c 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3369,11 +3369,11 @@ static int do_tcp_getsockopt(struct sock *sk, int level,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case TCP_MAXSEG:
 		val = tp->mss_cache;
-- 
2.43.0

[PATCH 4.19 059/148] l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 955e9876ba4ee26eeaab1b13517f5b2c88e73d55 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/l2tp/l2tp_ppp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index c0956781665e1..3ed3b85f30b6e 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -1380,11 +1380,11 @@ static int pppol2tp_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	err = -ENOTCONN;
 	if (sk->sk_user_data == NULL)
 		goto end;
-- 
2.43.0

[PATCH 4.19 060/148] udp: fix incorrect parameter validation in the udp_lib_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 4bb3ba7b74fceec6f558745b25a43c6521cf5506 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index a6048cc7fc35f..6e4b26c6f97c2 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2579,11 +2579,11 @@ int udp_lib_getsockopt(struct sock *sk, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case UDP_CORK:
 		val = READ_ONCE(up->corkflag);
-- 
2.43.0

[PATCH 4.19 061/148] net: kcm: fix incorrect parameter validation in the kcm_getsockopt) function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 3ed5f415133f9b7518fbe55ba9ae9a3f5e700929 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/kcm/kcmsock.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index a82892c288600..45450f0fd9acb 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -1276,10 +1276,11 @@ static int kcm_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case KCM_RECV_DISABLE:
 		val = kcm->rx_disabled;
-- 
2.43.0

[PATCH 4.19 062/148] net/x25: fix incorrect parameter validation in the x25_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit d6eb8de2015f0c24822e47356f839167ebde2945 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/x25/af_x25.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 9d0328bb30ca1..8d78f204ba3c1 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -475,12 +475,12 @@ static int x25_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		goto out;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	rc = -EINVAL;
 	if (len < 0)
 		goto out;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	rc = -EFAULT;
 	if (put_user(len, optlen))
 		goto out;
-- 
2.43.0

[PATCH 4.19 063/148] nfp: flower: handle acti_netdevs allocation failure

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 84e95149bd341705f0eca6a7fcb955c548805002 ]

The kmalloc_array() in nfp_fl_lag_do_work() will return null, if
the physical memory has run out. As a result, if we dereference
the acti_netdevs, the null pointer dereference bugs will happen.

This patch adds a check to judge whether allocation failure occurs.
If it happens, the delayed work will be rescheduled and try again.

Fixes: bb9a8d031140 ("nfp: flower: monitor and offload LAG groups")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240308142540.9674-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/flower/lag_conf.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c b/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
index bf10598f66ae0..1b5e0cef97713 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
@@ -336,6 +336,11 @@ static void nfp_fl_lag_do_work(struct work_struct *work)
 
 		acti_netdevs = kmalloc_array(entry->slave_cnt,
 					     sizeof(*acti_netdevs), GFP_KERNEL);
+		if (!acti_netdevs) {
+			schedule_delayed_work(&lag->work,
+					      NFP_FL_LAG_DELAY);
+			continue;
+		}
 
 		/* Include sanity check in the loop. It may be that a bond has
 		 * changed between processing the last notification and the
-- 
2.43.0

[PATCH 4.19 064/148] dm raid: fix false positive for requeue needed during reshape

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit b25b8f4b8ecef0f48c05f0c3572daeabefe16526 ]

An empty flush doesn't have a payload, so it should never be looked at
when considering to possibly requeue a bio for the case when a reshape
is in progress.

Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Reported-by: Patrick Plenefisch <simonpatp@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-raid.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 72aa5097b68ff..1759134fce824 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3348,14 +3348,14 @@ static int raid_map(struct dm_target *ti, struct bio *bio)
 	struct mddev *mddev = &rs->md;
 
 	/*
-	 * If we're reshaping to add disk(s)), ti->len and
+	 * If we're reshaping to add disk(s), ti->len and
 	 * mddev->array_sectors will differ during the process
 	 * (ti->len > mddev->array_sectors), so we have to requeue
 	 * bios with addresses > mddev->array_sectors here or
 	 * there will occur accesses past EOD of the component
 	 * data images thus erroring the raid set.
 	 */
-	if (unlikely(bio_end_sector(bio) > mddev->array_sectors))
+	if (unlikely(bio_has_data(bio) && bio_end_sector(bio) > mddev->array_sectors))
 		return DM_MAPIO_REQUEUE;
 
 	md_handle_request(mddev, bio);
-- 
2.43.0

[PATCH 4.19 065/148] dm: call the resume method on internal suspend

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 65e8fbde64520001abf1c8d0e573561b4746ef38 ]

There is this reported crash when experimenting with the lvm2 testsuite.
The list corruption is caused by the fact that the postsuspend and resume
methods were not paired correctly; there were two consecutive calls to the
origin_postsuspend function. The second call attempts to remove the
"hash_list" entry from a list, while it was already removed by the first
call.

Fix __dm_internal_resume so that it calls the preresume and resume
methods of the table's targets.

If a preresume method of some target fails, we are in a tricky situation.
We can't return an error because dm_internal_resume isn't supposed to
return errors. We can't return success, because then the "resume" and
"postsuspend" methods would not be paired correctly. So, we set the
DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace
tools, but it won't cause a kernel crash.

------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0
<snip>
RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282
RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff
RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058
R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001
R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0
FS:  00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0
Call Trace:
 <TASK>
 ? die+0x2d/0x80
 ? do_trap+0xeb/0xf0
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? do_error_trap+0x60/0x80
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? exc_invalid_op+0x49/0x60
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? asm_exc_invalid_op+0x16/0x20
 ? table_deps+0x1b0/0x1b0 [dm_mod]
 ? __list_del_entry_valid_or_report+0x77/0xc0
 origin_postsuspend+0x1a/0x50 [dm_snapshot]
 dm_table_postsuspend_targets+0x34/0x50 [dm_mod]
 dm_suspend+0xd8/0xf0 [dm_mod]
 dev_suspend+0x1f2/0x2f0 [dm_mod]
 ? table_deps+0x1b0/0x1b0 [dm_mod]
 ctl_ioctl+0x300/0x5f0 [dm_mod]
 dm_compat_ctl_ioctl+0x7/0x10 [dm_mod]
 __x64_compat_sys_ioctl+0x104/0x170
 do_syscall_64+0x184/0x1b0
 entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0xf7e6aead
<snip>
---[ end trace 0000000000000000 ]---

Fixes: ffcc39364160 ("dm: enhance internal suspend and resume interface")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 9a9b2adcf39e3..50dcda27144eb 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2849,6 +2849,9 @@ static void __dm_internal_suspend(struct mapped_device *md, unsigned suspend_fla
 
 static void __dm_internal_resume(struct mapped_device *md)
 {
+	int r;
+	struct dm_table *map;
+
 	BUG_ON(!md->internal_suspend_count);
 
 	if (--md->internal_suspend_count)
@@ -2857,12 +2860,23 @@ static void __dm_internal_resume(struct mapped_device *md)
 	if (dm_suspended_md(md))
 		goto done; /* resume from nested suspend */
 
-	/*
-	 * NOTE: existing callers don't need to call dm_table_resume_targets
-	 * (which may fail -- so best to avoid it for now by passing NULL map)
-	 */
-	(void) __dm_resume(md, NULL);
-
+	map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
+	r = __dm_resume(md, map);
+	if (r) {
+		/*
+		 * If a preresume method of some target failed, we are in a
+		 * tricky situation. We can't return an error to the caller. We
+		 * can't fake success because then the "resume" and
+		 * "postsuspend" methods would not be paired correctly, and it
+		 * would break various targets, for example it would cause list
+		 * corruption in the "origin" target.
+		 *
+		 * So, we fake normal suspend here, to make sure that the
+		 * "resume" and "postsuspend" methods will be paired correctly.
+		 */
+		DMERR("Preresume method failed: %d", r);
+		set_bit(DMF_SUSPENDED, &md->flags);
+	}
 done:
 	clear_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
 	smp_mb__after_atomic();
-- 
2.43.0

[PATCH 4.19 066/148] drm/tegra: dsi: Add missing check for of_find_device_by_node

[Sasha Levin]

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit afe6fcb9775882230cd29b529203eabd5d2a638d ]

Add check for the return value of of_find_device_by_node() and return
the error if it fails in order to avoid NULL pointer dereference.

Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024080738.825553-1-nichen@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index e2903bf7821b1..70cc960d3ff58 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1452,9 +1452,11 @@ static int tegra_dsi_ganged_probe(struct tegra_dsi *dsi)
 	np = of_parse_phandle(dsi->dev->of_node, "nvidia,ganged-mode", 0);
 	if (np) {
 		struct platform_device *gangster = of_find_device_by_node(np);
+		of_node_put(np);
+		if (!gangster)
+			return -EPROBE_DEFER;
 
 		dsi->slave = platform_get_drvdata(gangster);
-		of_node_put(np);
 
 		if (!dsi->slave) {
 			put_device(&gangster->dev);
-- 
2.43.0

[PATCH 4.19 067/148] gpu: host1x: mipi: Update tegra_mipi_request() to be node based

[Sasha Levin]

From: Sowjanya Komatineni <skomatineni@nvidia.com>

[ Upstream commit 767598d447aa46411289c5808b0e45e20a1823b4 ]

Tegra CSI driver need a separate MIPI device for each channel as
calibration of corresponding MIPI pads for each channel should
happen independently.

So, this patch updates tegra_mipi_request() API to add a device_node
pointer argument to allow creating mipi device for specific device
node rather than a device.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stable-dep-of: 830c1ded3563 ("drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 2 +-
 drivers/gpu/host1x/mipi.c   | 4 ++--
 include/linux/host1x.h      | 3 ++-
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 70cc960d3ff58..7033ab28f7716 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1543,7 +1543,7 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	if (IS_ERR(dsi->regs))
 		return PTR_ERR(dsi->regs);
 
-	dsi->mipi = tegra_mipi_request(&pdev->dev);
+	dsi->mipi = tegra_mipi_request(&pdev->dev, pdev->dev.of_node);
 	if (IS_ERR(dsi->mipi))
 		return PTR_ERR(dsi->mipi);
 
diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c
index e00809d996a29..762d349ad00f1 100644
--- a/drivers/gpu/host1x/mipi.c
+++ b/drivers/gpu/host1x/mipi.c
@@ -206,9 +206,9 @@ static int tegra_mipi_power_down(struct tegra_mipi *mipi)
 	return 0;
 }
 
-struct tegra_mipi_device *tegra_mipi_request(struct device *device)
+struct tegra_mipi_device *tegra_mipi_request(struct device *device,
+					     struct device_node *np)
 {
-	struct device_node *np = device->of_node;
 	struct tegra_mipi_device *dev;
 	struct of_phandle_args args;
 	int err;
diff --git a/include/linux/host1x.h b/include/linux/host1x.h
index aef6e2f738027..903c0ec204442 100644
--- a/include/linux/host1x.h
+++ b/include/linux/host1x.h
@@ -327,7 +327,8 @@ int host1x_client_unregister(struct host1x_client *client);
 
 struct tegra_mipi_device;
 
-struct tegra_mipi_device *tegra_mipi_request(struct device *device);
+struct tegra_mipi_device *tegra_mipi_request(struct device *device,
+					     struct device_node *np);
 void tegra_mipi_free(struct tegra_mipi_device *device);
 int tegra_mipi_enable(struct tegra_mipi_device *device);
 int tegra_mipi_disable(struct tegra_mipi_device *device);
-- 
2.43.0

[PATCH 4.19 068/148] drm/tegra: dsi: Make use of the helper function dev_err_probe()

[Sasha Levin]

From: Cai Huoqing <caihuoqing@baidu.com>

[ Upstream commit fc75e4fcbd1e4252a0481ebb23cd4516c127a8e2 ]

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stable-dep-of: 830c1ded3563 ("drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 7033ab28f7716..04bf4c89d870e 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1509,28 +1509,24 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	}
 
 	dsi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(dsi->clk)) {
-		dev_err(&pdev->dev, "cannot get DSI clock\n");
-		return PTR_ERR(dsi->clk);
-	}
+	if (IS_ERR(dsi->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk),
+				     "cannot get DSI clock\n");
 
 	dsi->clk_lp = devm_clk_get(&pdev->dev, "lp");
-	if (IS_ERR(dsi->clk_lp)) {
-		dev_err(&pdev->dev, "cannot get low-power clock\n");
-		return PTR_ERR(dsi->clk_lp);
-	}
+	if (IS_ERR(dsi->clk_lp))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
+				     "cannot get low-power clock\n");
 
 	dsi->clk_parent = devm_clk_get(&pdev->dev, "parent");
-	if (IS_ERR(dsi->clk_parent)) {
-		dev_err(&pdev->dev, "cannot get parent clock\n");
-		return PTR_ERR(dsi->clk_parent);
-	}
+	if (IS_ERR(dsi->clk_parent))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_parent),
+				     "cannot get parent clock\n");
 
 	dsi->vdd = devm_regulator_get(&pdev->dev, "avdd-dsi-csi");
-	if (IS_ERR(dsi->vdd)) {
-		dev_err(&pdev->dev, "cannot get VDD supply\n");
-		return PTR_ERR(dsi->vdd);
-	}
+	if (IS_ERR(dsi->vdd))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->vdd),
+				     "cannot get VDD supply\n");
 
 	err = tegra_dsi_setup_clocks(dsi);
 	if (err < 0) {
-- 
2.43.0

[PATCH 4.19 069/148] drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 830c1ded356369cd1303e8bb87ce3fea6e744de8 ]

If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: dec727399a4b ("drm/tegra: Add DSI support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/16820073278d031f6c474a08d5f22a255158585e.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 54 ++++++++++++++++++++++++-------------
 1 file changed, 35 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 04bf4c89d870e..44bf5a731ba72 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1504,44 +1504,58 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 
 	if (!pdev->dev.pm_domain) {
 		dsi->rst = devm_reset_control_get(&pdev->dev, "dsi");
-		if (IS_ERR(dsi->rst))
-			return PTR_ERR(dsi->rst);
+		if (IS_ERR(dsi->rst)) {
+			err = PTR_ERR(dsi->rst);
+			goto remove;
+		}
 	}
 
 	dsi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(dsi->clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk),
-				     "cannot get DSI clock\n");
+	if (IS_ERR(dsi->clk)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk),
+				    "cannot get DSI clock\n");
+		goto remove;
+	}
 
 	dsi->clk_lp = devm_clk_get(&pdev->dev, "lp");
-	if (IS_ERR(dsi->clk_lp))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
-				     "cannot get low-power clock\n");
+	if (IS_ERR(dsi->clk_lp)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
+				    "cannot get low-power clock\n");
+		goto remove;
+	}
 
 	dsi->clk_parent = devm_clk_get(&pdev->dev, "parent");
-	if (IS_ERR(dsi->clk_parent))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_parent),
-				     "cannot get parent clock\n");
+	if (IS_ERR(dsi->clk_parent)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_parent),
+				    "cannot get parent clock\n");
+		goto remove;
+	}
 
 	dsi->vdd = devm_regulator_get(&pdev->dev, "avdd-dsi-csi");
-	if (IS_ERR(dsi->vdd))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->vdd),
-				     "cannot get VDD supply\n");
+	if (IS_ERR(dsi->vdd)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->vdd),
+				    "cannot get VDD supply\n");
+		goto remove;
+	}
 
 	err = tegra_dsi_setup_clocks(dsi);
 	if (err < 0) {
 		dev_err(&pdev->dev, "cannot setup clocks\n");
-		return err;
+		goto remove;
 	}
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dsi->regs = devm_ioremap_resource(&pdev->dev, regs);
-	if (IS_ERR(dsi->regs))
-		return PTR_ERR(dsi->regs);
+	if (IS_ERR(dsi->regs)) {
+		err = PTR_ERR(dsi->regs);
+		goto remove;
+	}
 
 	dsi->mipi = tegra_mipi_request(&pdev->dev, pdev->dev.of_node);
-	if (IS_ERR(dsi->mipi))
-		return PTR_ERR(dsi->mipi);
+	if (IS_ERR(dsi->mipi)) {
+		err = PTR_ERR(dsi->mipi);
+		goto remove;
+	}
 
 	dsi->host.ops = &tegra_dsi_host_ops;
 	dsi->host.dev = &pdev->dev;
@@ -1572,6 +1586,8 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	mipi_dsi_host_unregister(&dsi->host);
 mipi_free:
 	tegra_mipi_free(dsi->mipi);
+remove:
+	tegra_output_remove(&dsi->output);
 	return err;
 }
 
-- 
2.43.0

[PATCH 4.19 070/148] drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path of tegra_dsi_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 5286a9fc280c45b6b307ee1b07f7a997e042252c ]

If an error occurs after calling pm_runtime_enable(), pm_runtime_disable()
should be called as already done in the remove function.

Fixes: ef8187d75265 ("drm/tegra: dsi: Implement runtime PM")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee4a15c9cd4b574a55cd67c30d2411239ba2cee9.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 44bf5a731ba72..fb7b000d4d341 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1583,6 +1583,7 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	return 0;
 
 unregister:
+	pm_runtime_disable(&pdev->dev);
 	mipi_dsi_host_unregister(&dsi->host);
 mipi_free:
 	tegra_mipi_free(dsi->mipi);
-- 
2.43.0

[PATCH 4.19 071/148] drm/rockchip: inno_hdmi: Fix video timing

[Sasha Levin]

From: Alex Bee <knaerzche@gmail.com>

[ Upstream commit 47a145c03484d33e65d773169d5ca1b9fe2a492e ]

The controller wants the difference between *total and *sync_start in the
HDMI_VIDEO_EXT_*DELAY registers. Otherwise the signal is very unstable for
certain non-VIC modes. See downstream commit [0].

[0] https://github.com/rockchip-linux/kernel/commit/8eb559f2502c

Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
Co-developed-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-4-knaerzche@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/inno_hdmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 1c02b3e61299c..229a1c908ad02 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -408,7 +408,7 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi,
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value & 0xFF);
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_H, (value >> 8) & 0xFF);
 
-	value = mode->hsync_start - mode->hdisplay;
+	value = mode->htotal - mode->hsync_start;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value & 0xFF);
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_H, (value >> 8) & 0xFF);
 
@@ -423,7 +423,7 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi,
 	value = mode->vtotal - mode->vdisplay;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
 
-	value = mode->vsync_start - mode->vdisplay;
+	value = mode->vtotal - mode->vsync_start;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
 
 	value = mode->vsync_end - mode->vsync_start;
-- 
2.43.0

[PATCH 4.19 072/148] drm: Don't treat 0 as -1 in drm_fixp2int_ceil

[Sasha Levin]

From: Harry Wentland <harry.wentland@amd.com>

[ Upstream commit cf8837d7204481026335461629b84ac7f4538fa5 ]

Unit testing this in VKMS shows that passing 0 into
this function returns -1, which is highly counter-
intuitive. Fix it by checking whether the input is
>= 0 instead of > 0.

Fixes: 64566b5e767f ("drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-2-harry.wentland@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_fixed.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/drm/drm_fixed.h b/include/drm/drm_fixed.h
index 553210c02ee0f..627efa56e59fb 100644
--- a/include/drm/drm_fixed.h
+++ b/include/drm/drm_fixed.h
@@ -88,7 +88,7 @@ static inline int drm_fixp2int(s64 a)
 
 static inline int drm_fixp2int_ceil(s64 a)
 {
-	if (a > 0)
+	if (a >= 0)
 		return drm_fixp2int(a + DRM_FIXED_ALMOST_ONE);
 	else
 		return drm_fixp2int(a - DRM_FIXED_ALMOST_ONE);
-- 
2.43.0

[PATCH 4.19 073/148] drm/rockchip: lvds: do not overwrite error code

[Sasha Levin]

From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

[ Upstream commit 79b09453c4e369ca81cfb670d0136d089e3b92f0 ]

ret variable stores the return value of drm_of_find_panel_or_bridge
which can return error codes different from EPROBE_DEFER. Therefore,
let's just return that error code instead of forcing it to EPROBE_DEFER.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-1-9c59a5779cf9@theobroma-systems.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/rockchip_lvds.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index 456bd9f13baef..215885c780759 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -374,7 +374,6 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 		goto err_put_port;
 	} else if (ret) {
 		DRM_DEV_ERROR(dev, "failed to find panel and bridge node\n");
-		ret = -EPROBE_DEFER;
 		goto err_put_port;
 	}
 	if (lvds->panel)
-- 
2.43.0

[PATCH 4.19 074/148] drm/rockchip: lvds: do not print scary message when probing defer

[Sasha Levin]

From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

[ Upstream commit 52d11c863ac92e36a0365249f7f6d27ac48c78bc ]

This scary message can misled the user into thinking something bad has
happened and needs to be fixed, however it could simply be part of a
normal boot process where EPROBE_DEFER is taken into account. Therefore,
let's use dev_err_probe so that this message doesn't get shown (by
default) when the return code is EPROBE_DEFER.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-2-9c59a5779cf9@theobroma-systems.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/rockchip_lvds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index 215885c780759..39a17c46dbf11 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -373,7 +373,7 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 		ret = -EINVAL;
 		goto err_put_port;
 	} else if (ret) {
-		DRM_DEV_ERROR(dev, "failed to find panel and bridge node\n");
+		dev_err_probe(dev, ret, "failed to find panel and bridge node\n");
 		goto err_put_port;
 	}
 	if (lvds->panel)
-- 
2.43.0

[PATCH 4.19 075/148] media: tc358743: register v4l2 async device only after successful setup

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 87399f1ff92203d65f1febf5919429f4bb613a02 ]

Ensure the device has been setup correctly before registering the v4l2
async device, thus allowing userspace to access.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Fixes: 4c5211a10039 ("[media] tc358743: register v4l2 asynchronous subdevice")
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110090111.458115-1-alexander.stein@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/tc358743.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index 079b8db4bc48b..2650be358b027 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -2107,9 +2107,6 @@ static int tc358743_probe(struct i2c_client *client,
 	state->mbus_fmt_code = MEDIA_BUS_FMT_RGB888_1X24;
 
 	sd->dev = &client->dev;
-	err = v4l2_async_register_subdev(sd);
-	if (err < 0)
-		goto err_hdl;
 
 	mutex_init(&state->confctl_mutex);
 
@@ -2167,6 +2164,10 @@ static int tc358743_probe(struct i2c_client *client,
 	if (err)
 		goto err_work_queues;
 
+	err = v4l2_async_register_subdev(sd);
+	if (err < 0)
+		goto err_work_queues;
+
 	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
 		  client->addr << 1, client->adapter->name);
 
-- 
2.43.0

[PATCH 4.19 076/148] perf evsel: Fix duplicate initialization of data->id in evsel__parse_sample()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 4962aec0d684c8edb14574ccd0da53e4926ff834 ]

data->id has been initialized at line 2362, remove duplicate initialization.

Fixes: 3ad31d8a0df2 ("perf evsel: Centralize perf_sample initialization")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240127025756.4041808-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/evsel.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 11a2aa80802d5..0644ae23122cd 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -2116,7 +2116,6 @@ int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event,
 	data->period = evsel->attr.sample_period;
 	data->cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 	data->misc    = event->header.misc;
-	data->id = -1ULL;
 	data->data_src = PERF_MEM_DATA_SRC_NONE;
 
 	if (event->header.type != PERF_RECORD_SAMPLE) {
-- 
2.43.0

[PATCH 4.19 077/148] ABI: sysfs-bus-pci-devices-aer_stats uses an invalid tag

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

[ Upstream commit abf313b5a8b72302062dd407ed7e470d67d389bb ]

According with Documentation/ABI/, the right tag to describe
an ABI symbol is "What:", and not "Where:".

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 0e7d29a39a54 ("PCI/AER: Fix rootport attribute paths in ABI docs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ABI/testing/sysfs-bus-pci-devices-aer_stats      | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
index 4b0318c99507f..ff229d71961c3 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -9,7 +9,7 @@ errors may be "seen" / reported by the link partner and not the
 problematic endpoint itself (which may report all counters as 0 as it never
 saw any problems).
 
-Where:		/sys/bus/pci/devices/<dev>/aer_dev_correctable
+What:		/sys/bus/pci/devices/<dev>/aer_dev_correctable
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
@@ -31,7 +31,7 @@ Header Log Overflow 0
 TOTAL_ERR_COR 2
 -------------------------------------------------------------------------
 
-Where:		/sys/bus/pci/devices/<dev>/aer_dev_fatal
+What:		/sys/bus/pci/devices/<dev>/aer_dev_fatal
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
@@ -62,7 +62,7 @@ TLP Prefix Blocked Error 0
 TOTAL_ERR_FATAL 0
 -------------------------------------------------------------------------
 
-Where:		/sys/bus/pci/devices/<dev>/aer_dev_nonfatal
+What:		/sys/bus/pci/devices/<dev>/aer_dev_nonfatal
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
@@ -103,19 +103,19 @@ collectors) that are AER capable. These indicate the number of error messages as
 device, so these counters include them and are thus cumulative of all the error
 messages on the PCI hierarchy originating at that root port.
 
-Where:		/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
+What:		/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_COR messages reported to rootport.
 
-Where:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
+What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_FATAL messages reported to rootport.
 
-Where:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
+What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
-- 
2.43.0

[PATCH 4.19 078/148] PCI/AER: Fix rootport attribute paths in ABI docs

[Sasha Levin]

From: Johan Hovold <johan+linaro@kernel.org>

[ Upstream commit 0e7d29a39a546161ea3a49e8e282a43212d7ff68 ]

The 'aer_stats' directory never made it into the sixth and final revision
of the series adding the sysfs AER attributes.

Link: https://lore.kernel.org/r/20240202131635.11405-2-johan+linaro@kernel.org
Link: https://lore.kernel.org/lkml/20180621184822.GB14136@bhelgaas-glaptop.roam.corp.google.com/
Fixes: 12833017e581 ("PCI/AER: Add sysfs attributes for rootport cumulative stats")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
index ff229d71961c3..afe7bdf4f9ad0 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -103,19 +103,19 @@ collectors) that are AER capable. These indicate the number of error messages as
 device, so these counters include them and are thus cumulative of all the error
 messages on the PCI hierarchy originating at that root port.
 
-What:		/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_cor
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_COR messages reported to rootport.
 
-What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_fatal
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_FATAL messages reported to rootport.
 
-What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_nonfatal
 Date:		July 2018
 Kernel Version: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
-- 
2.43.0

[PATCH 4.19 079/148] media: em28xx: annotate unchecked call to media_device_register()

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit fd61d77a3d28444b2635f0c8b5a2ecd6a4d94026 ]

Static analyzers generate alerts for an unchecked call to
`media_device_register()`. However, in this case, the device will work
reliably without the media controller API.

Add a comment above the call to prevent future unnecessary changes.

Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index b14bff7b4ec88..b9874324d1c44 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -3990,6 +3990,10 @@ static int em28xx_usb_probe(struct usb_interface *intf,
 	 * topology will likely change after the load of the em28xx subdrivers.
 	 */
 #ifdef CONFIG_MEDIA_CONTROLLER
+	/*
+	 * No need to check the return value, the device will still be
+	 * usable without media controller API.
+	 */
 	retval = media_device_register(dev->media_dev);
 #endif
 
-- 
2.43.0

[PATCH 4.19 080/148] media: v4l2-tpg: fix some memleaks in tpg_alloc

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8cf9c5051076e0eb958f4361d50d8b0c3ee6691c ]

In tpg_alloc, resources should be deallocated in each and every
error-handling paths, since they are allocated in for statements.
Otherwise there would be memleaks because tpg_free is called only when
tpg_alloc return 0.

Fixes: 63881df94d3e ("[media] vivid: add the Test Pattern Generator")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c | 52 +++++++++++++++----
 1 file changed, 42 insertions(+), 10 deletions(-)

diff --git a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
index 2036b94269afe..182a300e2d445 100644
--- a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
+++ b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
@@ -113,6 +113,7 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 {
 	unsigned pat;
 	unsigned plane;
+	int ret = 0;
 
 	tpg->max_line_width = max_w;
 	for (pat = 0; pat < TPG_MAX_PAT_LINES; pat++) {
@@ -121,14 +122,18 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 
 			tpg->lines[pat][plane] =
 				vzalloc(array3_size(max_w, 2, pixelsz));
-			if (!tpg->lines[pat][plane])
-				return -ENOMEM;
+			if (!tpg->lines[pat][plane]) {
+				ret = -ENOMEM;
+				goto free_lines;
+			}
 			if (plane == 0)
 				continue;
 			tpg->downsampled_lines[pat][plane] =
 				vzalloc(array3_size(max_w, 2, pixelsz));
-			if (!tpg->downsampled_lines[pat][plane])
-				return -ENOMEM;
+			if (!tpg->downsampled_lines[pat][plane]) {
+				ret = -ENOMEM;
+				goto free_lines;
+			}
 		}
 	}
 	for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
@@ -136,18 +141,45 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 
 		tpg->contrast_line[plane] =
 			vzalloc(array_size(pixelsz, max_w));
-		if (!tpg->contrast_line[plane])
-			return -ENOMEM;
+		if (!tpg->contrast_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 		tpg->black_line[plane] =
 			vzalloc(array_size(pixelsz, max_w));
-		if (!tpg->black_line[plane])
-			return -ENOMEM;
+		if (!tpg->black_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 		tpg->random_line[plane] =
 			vzalloc(array3_size(max_w, 2, pixelsz));
-		if (!tpg->random_line[plane])
-			return -ENOMEM;
+		if (!tpg->random_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 	}
 	return 0;
+
+free_contrast_line:
+	for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
+		vfree(tpg->contrast_line[plane]);
+		vfree(tpg->black_line[plane]);
+		vfree(tpg->random_line[plane]);
+		tpg->contrast_line[plane] = NULL;
+		tpg->black_line[plane] = NULL;
+		tpg->random_line[plane] = NULL;
+	}
+free_lines:
+	for (pat = 0; pat < TPG_MAX_PAT_LINES; pat++)
+		for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
+			vfree(tpg->lines[pat][plane]);
+			tpg->lines[pat][plane] = NULL;
+			if (plane == 0)
+				continue;
+			vfree(tpg->downsampled_lines[pat][plane]);
+			tpg->downsampled_lines[pat][plane] = NULL;
+		}
+	return ret;
 }
 EXPORT_SYMBOL_GPL(tpg_alloc);
 
-- 
2.43.0

[PATCH 4.19 081/148] media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8f94b49a5b5d386c038e355bef6347298aabd211 ]

The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity
but isn't freed in its following error-handling paths. This patch
adds such deallocation to prevent memleak of entity->name.

Fixes: be2fff656322 ("media: add helpers for memory-to-memory media controller")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-mem2mem.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
index 75c51007768e3..5c4e4d101ca46 100644
--- a/drivers/media/v4l2-core/v4l2-mem2mem.c
+++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
@@ -775,11 +775,17 @@ static int v4l2_m2m_register_entity(struct media_device *mdev,
 	entity->function = function;
 
 	ret = media_entity_pads_init(entity, num_pads, pads);
-	if (ret)
+	if (ret) {
+		kfree(entity->name);
+		entity->name = NULL;
 		return ret;
+	}
 	ret = media_device_register_entity(mdev, entity);
-	if (ret)
+	if (ret) {
+		kfree(entity->name);
+		entity->name = NULL;
 		return ret;
+	}
 
 	return 0;
 }
-- 
2.43.0

[PATCH 4.19 082/148] media: dvbdev: remove double-unlock

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

[ Upstream commit 122d0e8dd050cc5dc3fb9e9b5f2dee3c5276ce35 ]

As warned by smatch:
	drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:529 dvb_register_device() error: double unlock 'sem:&minor_rwsem'

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Stable-dep-of: 8c64f4cdf4e6 ("media: edia: dvbdev: fix a use-after-free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index b8335ede66264..1f80c4fa31c9b 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -536,7 +536,6 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvb_media_device_free(dvbdev);
 		kfree(dvbdevfops);
 		kfree(dvbdev);
-		up_write(&minor_rwsem);
 		mutex_unlock(&dvbdev_register_lock);
 		return ret;
 	}
-- 
2.43.0

[PATCH 4.19 083/148] media: media/dvb: Use kmemdup rather than duplicating its implementation

[Sasha Levin]

From: Fuqian Huang <huangfq.daxian@gmail.com>

[ Upstream commit f6af820ef1be58c2e4b81aa479b9f109eb6344ce ]

kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Stable-dep-of: 8c64f4cdf4e6 ("media: edia: dvbdev: fix a use-after-free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c             | 3 +--
 drivers/media/dvb-frontends/drx39xyj/drxj.c | 5 ++---
 2 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 1f80c4fa31c9b..5d68ad0ac5d26 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -485,7 +485,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		return -ENOMEM;
 	}
 
-	dvbdevfops = kzalloc(sizeof(struct file_operations), GFP_KERNEL);
+	dvbdevfops = kmemdup(template->fops, sizeof(*dvbdevfops), GFP_KERNEL);
 
 	if (!dvbdevfops){
 		kfree (dvbdev);
@@ -502,7 +502,6 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 	dvbdev->fops = dvbdevfops;
 	init_waitqueue_head (&dvbdev->wait_queue);
 
-	memcpy(dvbdevfops, template->fops, sizeof(struct file_operations));
 	dvbdevfops->owner = adap->module;
 
 	list_add_tail (&dvbdev->list_head, &adap->device_list);
diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.c b/drivers/media/dvb-frontends/drx39xyj/drxj.c
index 9670bc98b45a9..33cf6dccb547f 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drxj.c
+++ b/drivers/media/dvb-frontends/drx39xyj/drxj.c
@@ -12287,7 +12287,8 @@ struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c)
 	if (state == NULL)
 		goto error;
 
-	demod = kmalloc(sizeof(struct drx_demod_instance), GFP_KERNEL);
+	demod = kmemdup(&drxj_default_demod_g,
+			sizeof(struct drx_demod_instance), GFP_KERNEL);
 	if (demod == NULL)
 		goto error;
 
@@ -12311,8 +12312,6 @@ struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c)
 	state->demod = demod;
 
 	/* setup the demod data */
-	memcpy(demod, &drxj_default_demod_g, sizeof(struct drx_demod_instance));
-
 	demod->my_i2c_dev_addr = demod_addr;
 	demod->my_common_attr = demod_comm_attr;
 	demod->my_i2c_dev_addr->user_data = state;
-- 
2.43.0

[PATCH 4.19 084/148] media: dvbdev: Fix memleak in dvb_register_device

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 167faadfcf9339088910e9e85a1b711fcbbef8e9 ]

When device_create() fails, dvbdev and dvbdevfops should
be freed just like when dvb_register_media_device() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 8c64f4cdf4e6 ("media: edia: dvbdev: fix a use-after-free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 5d68ad0ac5d26..8273c969358e6 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -547,6 +547,9 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 	if (IS_ERR(clsdev)) {
 		pr_err("%s: failed to create device dvb%d.%s%d (%ld)\n",
 		       __func__, adap->num, dnames[type], id, PTR_ERR(clsdev));
+		dvb_media_device_free(dvbdev);
+		kfree(dvbdevfops);
+		kfree(dvbdev);
 		return PTR_ERR(clsdev);
 	}
 	dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n",
-- 
2.43.0

[PATCH 4.19 085/148] media: dvbdev: fix error logic at dvb_register_device()

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 1fec2ecc252301110e4149e6183fa70460d29674 ]

As reported by smatch:

	drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:510 dvb_register_device() warn: '&dvbdev->list_head' not removed from list
	drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:530 dvb_register_device() warn: '&dvbdev->list_head' not removed from list
	drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:545 dvb_register_device() warn: '&dvbdev->list_head' not removed from list

The error logic inside dvb_register_device() doesn't remove
devices from the dvb_adapter_list in case of errors.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 8c64f4cdf4e6 ("media: edia: dvbdev: fix a use-after-free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 8273c969358e6..cf0c428f5776b 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -513,6 +513,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 			break;
 
 	if (minor == MAX_DVB_MINORS) {
+		list_del (&dvbdev->list_head);
 		kfree(dvbdevfops);
 		kfree(dvbdev);
 		up_write(&minor_rwsem);
@@ -533,6 +534,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		      __func__);
 
 		dvb_media_device_free(dvbdev);
+		list_del (&dvbdev->list_head);
 		kfree(dvbdevfops);
 		kfree(dvbdev);
 		mutex_unlock(&dvbdev_register_lock);
@@ -548,6 +550,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		pr_err("%s: failed to create device dvb%d.%s%d (%ld)\n",
 		       __func__, adap->num, dnames[type], id, PTR_ERR(clsdev));
 		dvb_media_device_free(dvbdev);
+		list_del (&dvbdev->list_head);
 		kfree(dvbdevfops);
 		kfree(dvbdev);
 		return PTR_ERR(clsdev);
-- 
2.43.0

[PATCH 4.19 086/148] media: dvb-core: Fix use-after-free due to race at dvb_register_device()

[Sasha Levin]

From: Hyunwoo Kim <imv4bel@gmail.com>

[ Upstream commit 627bb528b086b4136315c25d6a447a98ea9448d3 ]

dvb_register_device() dynamically allocates fops with kmemdup()
to set the fops->owner.
And these fops are registered in 'file->f_ops' using replace_fops()
in the dvb_device_open() process, and kfree()d in dvb_free_device().

However, it is not common to use dynamically allocated fops instead
of 'static const' fops as an argument of replace_fops(),
and UAF may occur.
These UAFs can occur on any dvb type using dvb_register_device(),
such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc.

So, instead of kfree() the fops dynamically allocated in
dvb_register_device() in dvb_free_device() called during the
.disconnect() process, kfree() it collectively in exit_dvbdev()
called when the dvbdev.c module is removed.

Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 8c64f4cdf4e6 ("media: edia: dvbdev: fix a use-after-free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 84 ++++++++++++++++++++++++---------
 include/media/dvbdev.h          | 15 ++++++
 2 files changed, 78 insertions(+), 21 deletions(-)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index cf0c428f5776b..35c272d77375e 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -37,6 +37,7 @@
 #include <media/tuner.h>
 
 static DEFINE_MUTEX(dvbdev_mutex);
+static LIST_HEAD(dvbdevfops_list);
 static int dvbdev_debug;
 
 module_param(dvbdev_debug, int, 0644);
@@ -464,14 +465,15 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 			enum dvb_device_type type, int demux_sink_pads)
 {
 	struct dvb_device *dvbdev;
-	struct file_operations *dvbdevfops;
+	struct file_operations *dvbdevfops = NULL;
+	struct dvbdevfops_node *node = NULL, *new_node = NULL;
 	struct device *clsdev;
 	int minor;
 	int id, ret;
 
 	mutex_lock(&dvbdev_register_lock);
 
-	if ((id = dvbdev_get_free_id (adap, type)) < 0){
+	if ((id = dvbdev_get_free_id (adap, type)) < 0) {
 		mutex_unlock(&dvbdev_register_lock);
 		*pdvbdev = NULL;
 		pr_err("%s: couldn't find free device id\n", __func__);
@@ -479,18 +481,45 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 	}
 
 	*pdvbdev = dvbdev = kzalloc(sizeof(*dvbdev), GFP_KERNEL);
-
 	if (!dvbdev){
 		mutex_unlock(&dvbdev_register_lock);
 		return -ENOMEM;
 	}
 
-	dvbdevfops = kmemdup(template->fops, sizeof(*dvbdevfops), GFP_KERNEL);
+	/*
+	 * When a device of the same type is probe()d more than once,
+	 * the first allocated fops are used. This prevents memory leaks
+	 * that can occur when the same device is probe()d repeatedly.
+	 */
+	list_for_each_entry(node, &dvbdevfops_list, list_head) {
+		if (node->fops->owner == adap->module &&
+				node->type == type &&
+				node->template == template) {
+			dvbdevfops = node->fops;
+			break;
+		}
+	}
 
-	if (!dvbdevfops){
-		kfree (dvbdev);
-		mutex_unlock(&dvbdev_register_lock);
-		return -ENOMEM;
+	if (dvbdevfops == NULL) {
+		dvbdevfops = kmemdup(template->fops, sizeof(*dvbdevfops), GFP_KERNEL);
+		if (!dvbdevfops) {
+			kfree(dvbdev);
+			mutex_unlock(&dvbdev_register_lock);
+			return -ENOMEM;
+		}
+
+		new_node = kzalloc(sizeof(struct dvbdevfops_node), GFP_KERNEL);
+		if (!new_node) {
+			kfree(dvbdevfops);
+			kfree(dvbdev);
+			mutex_unlock(&dvbdev_register_lock);
+			return -ENOMEM;
+		}
+
+		new_node->fops = dvbdevfops;
+		new_node->type = type;
+		new_node->template = template;
+		list_add_tail (&new_node->list_head, &dvbdevfops_list);
 	}
 
 	memcpy(dvbdev, template, sizeof(struct dvb_device));
@@ -501,20 +530,20 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 	dvbdev->priv = priv;
 	dvbdev->fops = dvbdevfops;
 	init_waitqueue_head (&dvbdev->wait_queue);
-
 	dvbdevfops->owner = adap->module;
-
 	list_add_tail (&dvbdev->list_head, &adap->device_list);
-
 	down_write(&minor_rwsem);
 #ifdef CONFIG_DVB_DYNAMIC_MINORS
 	for (minor = 0; minor < MAX_DVB_MINORS; minor++)
 		if (dvb_minors[minor] == NULL)
 			break;
-
 	if (minor == MAX_DVB_MINORS) {
+		if (new_node) {
+			list_del (&new_node->list_head);
+			kfree(dvbdevfops);
+			kfree(new_node);
+		}
 		list_del (&dvbdev->list_head);
-		kfree(dvbdevfops);
 		kfree(dvbdev);
 		up_write(&minor_rwsem);
 		mutex_unlock(&dvbdev_register_lock);
@@ -523,41 +552,47 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 #else
 	minor = nums2minor(adap->num, type, id);
 #endif
-
 	dvbdev->minor = minor;
 	dvb_minors[minor] = dvb_device_get(dvbdev);
 	up_write(&minor_rwsem);
-
 	ret = dvb_register_media_device(dvbdev, type, minor, demux_sink_pads);
 	if (ret) {
 		pr_err("%s: dvb_register_media_device failed to create the mediagraph\n",
 		      __func__);
-
+		if (new_node) {
+			list_del (&new_node->list_head);
+			kfree(dvbdevfops);
+			kfree(new_node);
+		}
 		dvb_media_device_free(dvbdev);
 		list_del (&dvbdev->list_head);
-		kfree(dvbdevfops);
 		kfree(dvbdev);
 		mutex_unlock(&dvbdev_register_lock);
 		return ret;
 	}
 
-	mutex_unlock(&dvbdev_register_lock);
-
 	clsdev = device_create(dvb_class, adap->device,
 			       MKDEV(DVB_MAJOR, minor),
 			       dvbdev, "dvb%d.%s%d", adap->num, dnames[type], id);
 	if (IS_ERR(clsdev)) {
 		pr_err("%s: failed to create device dvb%d.%s%d (%ld)\n",
 		       __func__, adap->num, dnames[type], id, PTR_ERR(clsdev));
+		if (new_node) {
+			list_del (&new_node->list_head);
+			kfree(dvbdevfops);
+			kfree(new_node);
+		}
 		dvb_media_device_free(dvbdev);
 		list_del (&dvbdev->list_head);
-		kfree(dvbdevfops);
 		kfree(dvbdev);
+		mutex_unlock(&dvbdev_register_lock);
 		return PTR_ERR(clsdev);
 	}
+
 	dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n",
 		adap->num, dnames[type], id, minor, minor);
 
+	mutex_unlock(&dvbdev_register_lock);
 	return 0;
 }
 EXPORT_SYMBOL(dvb_register_device);
@@ -586,7 +621,6 @@ static void dvb_free_device(struct kref *ref)
 {
 	struct dvb_device *dvbdev = container_of(ref, struct dvb_device, ref);
 
-	kfree (dvbdev->fops);
 	kfree (dvbdev);
 }
 
@@ -1082,9 +1116,17 @@ static int __init init_dvbdev(void)
 
 static void __exit exit_dvbdev(void)
 {
+	struct dvbdevfops_node *node, *next;
+
 	class_destroy(dvb_class);
 	cdev_del(&dvb_device_cdev);
 	unregister_chrdev_region(MKDEV(DVB_MAJOR, 0), MAX_DVB_MINORS);
+
+	list_for_each_entry_safe(node, next, &dvbdevfops_list, list_head) {
+		list_del (&node->list_head);
+		kfree(node->fops);
+		kfree(node);
+	}
 }
 
 subsys_initcall(init_dvbdev);
diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h
index 09279ed0051ea..0e2bda5ccadd5 100644
--- a/include/media/dvbdev.h
+++ b/include/media/dvbdev.h
@@ -189,6 +189,21 @@ struct dvb_device {
 	void *priv;
 };
 
+/**
+ * struct dvbdevfops_node - fops nodes registered in dvbdevfops_list
+ *
+ * @fops:		Dynamically allocated fops for ->owner registration
+ * @type:		type of dvb_device
+ * @template:		dvb_device used for registration
+ * @list_head:		list_head for dvbdevfops_list
+ */
+struct dvbdevfops_node {
+	struct file_operations *fops;
+	enum dvb_device_type type;
+	const struct dvb_device *template;
+	struct list_head list_head;
+};
+
 /**
  * dvb_device_get - Increase dvb_device reference
  *
-- 
2.43.0

[PATCH 4.19 087/148] media: edia: dvbdev: fix a use-after-free

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8c64f4cdf4e6cc5682c52523713af8c39c94e6d5 ]

In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed
in several error-handling paths. However, *pdvbdev is not set to NULL
after dvbdev's deallocation, causing use-after-frees in many places,
for example, in the following call chain:

budget_register
  |-> dvb_dmxdev_init
        |-> dvb_register_device
  |-> dvb_dmxdev_release
        |-> dvb_unregister_device
              |-> dvb_remove_device
                    |-> dvb_device_put
                          |-> kref_put

When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in
dvb_register_device) could point to memory that had been freed in
dvb_register_device. Thereafter, this pointer is transferred to
kref_put and triggering a use-after-free.

Link: https://lore.kernel.org/linux-media/20240203134046.3120099-1-alexious@zju.edu.cn
Fixes: b61901024776 ("V4L/DVB (5244): Dvbdev: fix illegal re-usage of fileoperations struct")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 35c272d77375e..f426e1bf16f0a 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -504,6 +504,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvbdevfops = kmemdup(template->fops, sizeof(*dvbdevfops), GFP_KERNEL);
 		if (!dvbdevfops) {
 			kfree(dvbdev);
+			*pdvbdev = NULL;
 			mutex_unlock(&dvbdev_register_lock);
 			return -ENOMEM;
 		}
@@ -512,6 +513,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		if (!new_node) {
 			kfree(dvbdevfops);
 			kfree(dvbdev);
+			*pdvbdev = NULL;
 			mutex_unlock(&dvbdev_register_lock);
 			return -ENOMEM;
 		}
@@ -545,6 +547,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		}
 		list_del (&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		up_write(&minor_rwsem);
 		mutex_unlock(&dvbdev_register_lock);
 		return -EINVAL;
@@ -567,6 +570,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvb_media_device_free(dvbdev);
 		list_del (&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		mutex_unlock(&dvbdev_register_lock);
 		return ret;
 	}
@@ -585,6 +589,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvb_media_device_free(dvbdev);
 		list_del (&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		mutex_unlock(&dvbdev_register_lock);
 		return PTR_ERR(clsdev);
 	}
-- 
2.43.0

[PATCH 4.19 088/148] clk: qcom: reset: Allow specifying custom reset delay

[Sasha Levin]

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit 2cb8a39b6781ea23accd1fa93b3ad000d0948aec ]

The amount of time required between asserting and deasserting the reset
signal can vary depending on the involved hardware component. Sometimes
1 us might not be enough and a larger delay is necessary to conform to
the specifications.

Usually this is worked around in the consuming drivers, by replacing
reset_control_reset() with a sequence of reset_control_assert(), waiting
for a custom delay, followed by reset_control_deassert().

However, in some cases the driver making use of the reset is generic and
can be used with different reset controllers. In this case the reset
time requirement is better handled directly by the reset controller
driver.

Make this possible by adding an "udelay" field to the qcom_reset_map
that allows setting a different reset delay (in microseconds).

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com
Stable-dep-of: 2f8cf2c3f3e3 ("clk: qcom: reset: Ensure write completion on reset de/assertion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/reset.c | 4 +++-
 drivers/clk/qcom/reset.h | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/reset.c b/drivers/clk/qcom/reset.c
index 0324d8daab9bc..fc68c8fa30ac7 100644
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -21,8 +21,10 @@
 
 static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
 {
+	struct qcom_reset_controller *rst = to_qcom_reset_controller(rcdev);
+
 	rcdev->ops->assert(rcdev, id);
-	udelay(1);
+	udelay(rst->reset_map[id].udelay ?: 1); /* use 1 us as default */
 	rcdev->ops->deassert(rcdev, id);
 	return 0;
 }
diff --git a/drivers/clk/qcom/reset.h b/drivers/clk/qcom/reset.h
index cda877927d43a..3e30f6724c7a4 100644
--- a/drivers/clk/qcom/reset.h
+++ b/drivers/clk/qcom/reset.h
@@ -19,6 +19,7 @@
 struct qcom_reset_map {
 	unsigned int reg;
 	u8 bit;
+	u8 udelay;
 };
 
 struct regmap;
-- 
2.43.0

[PATCH 4.19 089/148] clk: qcom: reset: support resetting multiple bits

[Sasha Levin]

From: Robert Marko <robimarko@gmail.com>

[ Upstream commit 4a5210893625f89723ea210d7c630b730abb37ad ]

This patch adds the support for giving the complete bitmask
in reset structure and reset operation will use this bitmask
for all reset operations.

Currently, reset structure only takes a single bit for each reset
and then calculates the bitmask by using the BIT() macro.

However, this is not sufficient anymore for newer SoC-s like IPQ8074,
IPQ6018 and more, since their networking resets require multiple bits
to be asserted in order to properly reset the HW block completely.

So, in order to allow asserting multiple bits add "bitmask" field to
qcom_reset_map, and then use that bitmask value if its populated in the
driver, if its not populated, then we just default to existing behaviour
and calculate the bitmask on the fly.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
Stable-dep-of: 2f8cf2c3f3e3 ("clk: qcom: reset: Ensure write completion on reset de/assertion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/reset.c | 4 ++--
 drivers/clk/qcom/reset.h | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/reset.c b/drivers/clk/qcom/reset.c
index fc68c8fa30ac7..60b60631c3445 100644
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -38,7 +38,7 @@ qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
 
 	rst = to_qcom_reset_controller(rcdev);
 	map = &rst->reset_map[id];
-	mask = BIT(map->bit);
+	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
 	return regmap_update_bits(rst->regmap, map->reg, mask, mask);
 }
@@ -52,7 +52,7 @@ qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
 
 	rst = to_qcom_reset_controller(rcdev);
 	map = &rst->reset_map[id];
-	mask = BIT(map->bit);
+	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
 	return regmap_update_bits(rst->regmap, map->reg, mask, 0);
 }
diff --git a/drivers/clk/qcom/reset.h b/drivers/clk/qcom/reset.h
index 3e30f6724c7a4..a118311503d41 100644
--- a/drivers/clk/qcom/reset.h
+++ b/drivers/clk/qcom/reset.h
@@ -20,6 +20,7 @@ struct qcom_reset_map {
 	unsigned int reg;
 	u8 bit;
 	u8 udelay;
+	u32 bitmask;
 };
 
 struct regmap;
-- 
2.43.0

[PATCH 4.19 090/148] clk: qcom: reset: Commonize the de/assert functions

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit eda40d9c583e95e0b6ac69d2950eec10f802e0e8 ]

They do the same thing, except the last argument of the last function
call differs. Commonize them.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-2-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 2f8cf2c3f3e3 ("clk: qcom: reset: Ensure write completion on reset de/assertion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/reset.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/qcom/reset.c b/drivers/clk/qcom/reset.c
index 60b60631c3445..252d7abf577e3 100644
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -29,8 +29,8 @@ static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
 	return 0;
 }
 
-static int
-qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+static int qcom_reset_set_assert(struct reset_controller_dev *rcdev,
+				 unsigned long id, bool assert)
 {
 	struct qcom_reset_controller *rst;
 	const struct qcom_reset_map *map;
@@ -40,21 +40,17 @@ qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
 	map = &rst->reset_map[id];
 	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, mask);
+	return regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
 }
 
-static int
-qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+static int qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
 {
-	struct qcom_reset_controller *rst;
-	const struct qcom_reset_map *map;
-	u32 mask;
-
-	rst = to_qcom_reset_controller(rcdev);
-	map = &rst->reset_map[id];
-	mask = map->bitmask ? map->bitmask : BIT(map->bit);
+	return qcom_reset_set_assert(rcdev, id, true);
+}
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, 0);
+static int qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return qcom_reset_set_assert(rcdev, id, false);
 }
 
 const struct reset_control_ops qcom_reset_ops = {
-- 
2.43.0

[PATCH 4.19 091/148] clk: qcom: reset: Ensure write completion on reset de/assertion

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 2f8cf2c3f3e3f7ef61bd19abb4b0bb797ad50aaf ]

Trying to toggle the resets in a rapid fashion can lead to the changes
not actually arriving at the clock controller block when we expect them
to. This was observed at least on SM8250.

Read back the value after regmap_update_bits to ensure write completion.

Fixes: b36ba30c8ac6 ("clk: qcom: Add reset controller support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-3-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/reset.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/reset.c b/drivers/clk/qcom/reset.c
index 252d7abf577e3..3a1cfc2dd94c9 100644
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -40,7 +40,12 @@ static int qcom_reset_set_assert(struct reset_controller_dev *rcdev,
 	map = &rst->reset_map[id];
 	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
+	regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
+
+	/* Read back the register to ensure write completion, ignore the value */
+	regmap_read(rst->regmap, map->reg, &mask);
+
+	return 0;
 }
 
 static int qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
-- 
2.43.0

[PATCH 4.19 092/148] quota: code cleanup for __dquot_alloc_space()

[Sasha Levin]

From: Chengguang Xu <cgxu519@gmx.com>

[ Upstream commit df15a2a59d0b29d86e17140b83ed231adaded12f ]

Replace (flags & DQUOT_SPACE_RESERVE) with
variable reserve.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 868936076f41d..683727c5758c0 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1743,7 +1743,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (!dquots[cnt])
 			continue;
-		if (flags & DQUOT_SPACE_RESERVE) {
+		if (reserve) {
 			ret = dquot_add_space(dquots[cnt], 0, number, flags,
 					      &warn[cnt]);
 		} else {
@@ -1756,7 +1756,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 				if (!dquots[cnt])
 					continue;
 				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				if (flags & DQUOT_SPACE_RESERVE) {
+				if (reserve) {
 					dquots[cnt]->dq_dqb.dqb_rsvspace -=
 									number;
 				} else {
-- 
2.43.0

[PATCH 4.19 093/148] fs/quota: erase unused but set variable warning

[Sasha Levin]

From: Jiang Biao <benbjiang@tencent.com>

[ Upstream commit 78bc3334a69ff289dbc973a9db7c52a2d7757e5b ]

Local variable *reserved* of remove_dquot_ref() is only used if
define CONFIG_QUOTA_DEBUG, but not ebraced in CONFIG_QUOTA_DEBUG
macro, which leads to unused-but-set-variable warning when compiling.

This patch ebrace it into CONFIG_QUOTA_DEBUG macro like what is done
in add_dquot_ref().

Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 683727c5758c0..b55d91d3d87c2 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1129,7 +1129,9 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 		struct list_head *tofree_head)
 {
 	struct inode *inode;
+#ifdef CONFIG_QUOTA_DEBUG
 	int reserved = 0;
+#endif
 
 	spin_lock(&sb->s_inode_list_lock);
 	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
@@ -1141,8 +1143,10 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 		 */
 		spin_lock(&dq_data_lock);
 		if (!IS_NOQUOTA(inode)) {
+#ifdef CONFIG_QUOTA_DEBUG
 			if (unlikely(inode_get_rsv_space(inode) > 0))
 				reserved = 1;
+#endif
 			remove_inode_dquot_ref(inode, type, tofree_head);
 		}
 		spin_unlock(&dq_data_lock);
-- 
2.43.0

[PATCH 4.19 094/148] quota: check time limit when back out space/inode change

[Sasha Levin]

From: Chengguang Xu <cgxu519@gmx.com>

[ Upstream commit 632a9f3acd6687376cbb0b178df6048e19cbacc9 ]

When we fail from allocating inode/space, we back out
the change we already did. In a special case which has
exceeded soft limit by the change, we should also check
time limit and reset it properly.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index b55d91d3d87c2..895636fd655f6 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1760,13 +1760,11 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 				if (!dquots[cnt])
 					continue;
 				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				if (reserve) {
-					dquots[cnt]->dq_dqb.dqb_rsvspace -=
-									number;
-				} else {
-					dquots[cnt]->dq_dqb.dqb_curspace -=
-									number;
-				}
+				if (reserve)
+					dquot_free_reserved_space(dquots[cnt],
+								  number);
+				else
+					dquot_decr_space(dquots[cnt], number);
 				spin_unlock(&dquots[cnt]->dq_dqb_lock);
 			}
 			spin_unlock(&inode->i_lock);
@@ -1817,7 +1815,7 @@ int dquot_alloc_inode(struct inode *inode)
 					continue;
 				/* Back out changes we already did */
 				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				dquots[cnt]->dq_dqb.dqb_curinodes--;
+				dquot_decr_inodes(dquots[cnt], 1);
 				spin_unlock(&dquots[cnt]->dq_dqb_lock);
 			}
 			goto warn_put_all;
-- 
2.43.0

[PATCH 4.19 095/148] quota: simplify drop_dquot_ref()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 7bce48f0fec602b3b6c335963b26d9eefa417788 ]

As Honza said, remove_inode_dquot_ref() currently does not release the
last dquot reference but instead adds the dquot to tofree_head list. This
is because dqput() can sleep while dropping of the last dquot reference
(writing back the dquot and calling ->release_dquot()) and that must not
happen under dq_list_lock. Now that dqput() queues the final dquot cleanup
into a workqueue, remove_inode_dquot_ref() can call dqput() unconditionally
and we can significantly simplify it.

Here we open code the simplified code of remove_inode_dquot_ref() into
remove_dquot_ref() and remove the function put_dquot_list() which is no
longer used.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-6-libaokun1@huawei.com>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 70 +++++++-----------------------------------------
 1 file changed, 9 insertions(+), 61 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 895636fd655f6..dd9c381b874fd 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1074,59 +1074,7 @@ static int add_dquot_ref(struct super_block *sb, int type)
 	return err;
 }
 
-/*
- * Remove references to dquots from inode and add dquot to list for freeing
- * if we have the last reference to dquot
- */
-static void remove_inode_dquot_ref(struct inode *inode, int type,
-				   struct list_head *tofree_head)
-{
-	struct dquot **dquots = i_dquot(inode);
-	struct dquot *dquot = dquots[type];
-
-	if (!dquot)
-		return;
-
-	dquots[type] = NULL;
-	if (list_empty(&dquot->dq_free)) {
-		/*
-		 * The inode still has reference to dquot so it can't be in the
-		 * free list
-		 */
-		spin_lock(&dq_list_lock);
-		list_add(&dquot->dq_free, tofree_head);
-		spin_unlock(&dq_list_lock);
-	} else {
-		/*
-		 * Dquot is already in a list to put so we won't drop the last
-		 * reference here.
-		 */
-		dqput(dquot);
-	}
-}
-
-/*
- * Free list of dquots
- * Dquots are removed from inodes and no new references can be got so we are
- * the only ones holding reference
- */
-static void put_dquot_list(struct list_head *tofree_head)
-{
-	struct list_head *act_head;
-	struct dquot *dquot;
-
-	act_head = tofree_head->next;
-	while (act_head != tofree_head) {
-		dquot = list_entry(act_head, struct dquot, dq_free);
-		act_head = act_head->next;
-		/* Remove dquot from the list so we won't have problems... */
-		list_del_init(&dquot->dq_free);
-		dqput(dquot);
-	}
-}
-
-static void remove_dquot_ref(struct super_block *sb, int type,
-		struct list_head *tofree_head)
+static void remove_dquot_ref(struct super_block *sb, int type)
 {
 	struct inode *inode;
 #ifdef CONFIG_QUOTA_DEBUG
@@ -1143,11 +1091,16 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 		 */
 		spin_lock(&dq_data_lock);
 		if (!IS_NOQUOTA(inode)) {
+			struct dquot **dquots = i_dquot(inode);
+			struct dquot *dquot = dquots[type];
+
 #ifdef CONFIG_QUOTA_DEBUG
 			if (unlikely(inode_get_rsv_space(inode) > 0))
 				reserved = 1;
 #endif
-			remove_inode_dquot_ref(inode, type, tofree_head);
+			dquots[type] = NULL;
+			if (dquot)
+				dqput(dquot);
 		}
 		spin_unlock(&dq_data_lock);
 	}
@@ -1164,13 +1117,8 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 /* Gather all references from inodes and drop them */
 static void drop_dquot_ref(struct super_block *sb, int type)
 {
-	LIST_HEAD(tofree_head);
-
-	if (sb->dq_op) {
-		remove_dquot_ref(sb, type, &tofree_head);
-		synchronize_srcu(&dquot_srcu);
-		put_dquot_list(&tofree_head);
-	}
+	if (sb->dq_op)
+		remove_dquot_ref(sb, type);
 }
 
 static inline
-- 
2.43.0

[PATCH 4.19 096/148] quota: Fix potential NULL pointer dereference

[Sasha Levin]

From: Wang Jianjian <wangjianjian3@huawei.com>

[ Upstream commit d0aa72604fbd80c8aabb46eda00535ed35570f1f ]

Below race may cause NULL pointer dereference

P1					P2
dquot_free_inode			quota_off
					  drop_dquot_ref
					   remove_dquot_ref
					   dquots = i_dquot(inode)
  dquots = i_dquot(inode)
  srcu_read_lock
  dquots[cnt]) != NULL (1)
					     dquots[type] = NULL (2)
  spin_lock(&dquots[cnt]->dq_dqb_lock) (3)
   ....

If dquot_free_inode(or other routines) checks inode's quota pointers (1)
before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer
dereference will be triggered.

So let's fix it by using a temporary pointer to avoid this issue.

Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240202081852.2514092-1-wangjianjian3@huawei.com>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 98 ++++++++++++++++++++++++++++--------------------
 1 file changed, 57 insertions(+), 41 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index dd9c381b874fd..133ca865de976 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -399,15 +399,17 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 
 /* Dirtify all the dquots - this can block when journalling */
-static inline int mark_all_dquot_dirty(struct dquot * const *dquot)
+static inline int mark_all_dquot_dirty(struct dquot * const *dquots)
 {
 	int ret, err, cnt;
+	struct dquot *dquot;
 
 	ret = err = 0;
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquot[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot)
 			/* Even in case of error we have to continue */
-			ret = mark_dquot_dirty(dquot[cnt]);
+			ret = mark_dquot_dirty(dquot);
 		if (!err)
 			err = ret;
 	}
@@ -1674,6 +1676,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	struct dquot_warn warn[MAXQUOTAS];
 	int reserve = flags & DQUOT_SPACE_RESERVE;
 	struct dquot **dquots;
+	struct dquot *dquot;
 
 	if (!inode_quota_active(inode)) {
 		if (reserve) {
@@ -1693,27 +1696,26 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	index = srcu_read_lock(&dquot_srcu);
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
 		if (reserve) {
-			ret = dquot_add_space(dquots[cnt], 0, number, flags,
-					      &warn[cnt]);
+			ret = dquot_add_space(dquot, 0, number, flags, &warn[cnt]);
 		} else {
-			ret = dquot_add_space(dquots[cnt], number, 0, flags,
-					      &warn[cnt]);
+			ret = dquot_add_space(dquot, number, 0, flags, &warn[cnt]);
 		}
 		if (ret) {
 			/* Back out changes we already did */
 			for (cnt--; cnt >= 0; cnt--) {
-				if (!dquots[cnt])
+				dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+				if (!dquot)
 					continue;
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
 				if (reserve)
-					dquot_free_reserved_space(dquots[cnt],
-								  number);
+					dquot_free_reserved_space(dquot, number);
 				else
-					dquot_decr_space(dquots[cnt], number);
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+					dquot_decr_space(dquot, number);
+				spin_unlock(&dquot->dq_dqb_lock);
 			}
 			spin_unlock(&inode->i_lock);
 			goto out_flush_warn;
@@ -1744,6 +1746,7 @@ int dquot_alloc_inode(struct inode *inode)
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
+	struct dquot *dquot;
 
 	if (!inode_quota_active(inode))
 		return 0;
@@ -1754,17 +1757,19 @@ int dquot_alloc_inode(struct inode *inode)
 	index = srcu_read_lock(&dquot_srcu);
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		ret = dquot_add_inodes(dquots[cnt], 1, &warn[cnt]);
+		ret = dquot_add_inodes(dquot, 1, &warn[cnt]);
 		if (ret) {
 			for (cnt--; cnt >= 0; cnt--) {
-				if (!dquots[cnt])
+				dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+				if (!dquot)
 					continue;
 				/* Back out changes we already did */
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				dquot_decr_inodes(dquots[cnt], 1);
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
+				dquot_decr_inodes(dquot, 1);
+				spin_unlock(&dquot->dq_dqb_lock);
 			}
 			goto warn_put_all;
 		}
@@ -1786,6 +1791,7 @@ EXPORT_SYMBOL(dquot_alloc_inode);
 int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int cnt, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1801,9 +1807,8 @@ int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 	spin_lock(&inode->i_lock);
 	/* Claim reserved quotas to allocated quotas */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquots[cnt]) {
-			struct dquot *dquot = dquots[cnt];
-
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot) {
 			spin_lock(&dquot->dq_dqb_lock);
 			if (WARN_ON_ONCE(dquot->dq_dqb.dqb_rsvspace < number))
 				number = dquot->dq_dqb.dqb_rsvspace;
@@ -1828,6 +1833,7 @@ EXPORT_SYMBOL(dquot_claim_space_nodirty);
 void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int cnt, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1843,9 +1849,8 @@ void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 	spin_lock(&inode->i_lock);
 	/* Claim reserved quotas to allocated quotas */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquots[cnt]) {
-			struct dquot *dquot = dquots[cnt];
-
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot) {
 			spin_lock(&dquot->dq_dqb_lock);
 			if (WARN_ON_ONCE(dquot->dq_dqb.dqb_curspace < number))
 				number = dquot->dq_dqb.dqb_curspace;
@@ -1872,6 +1877,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int reserve = flags & DQUOT_SPACE_RESERVE, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1892,17 +1898,18 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 		int wtype;
 
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		spin_lock(&dquots[cnt]->dq_dqb_lock);
-		wtype = info_bdq_free(dquots[cnt], number);
+		spin_lock(&dquot->dq_dqb_lock);
+		wtype = info_bdq_free(dquot, number);
 		if (wtype != QUOTA_NL_NOWARN)
-			prepare_warning(&warn[cnt], dquots[cnt], wtype);
+			prepare_warning(&warn[cnt], dquot, wtype);
 		if (reserve)
-			dquot_free_reserved_space(dquots[cnt], number);
+			dquot_free_reserved_space(dquot, number);
 		else
-			dquot_decr_space(dquots[cnt], number);
-		spin_unlock(&dquots[cnt]->dq_dqb_lock);
+			dquot_decr_space(dquot, number);
+		spin_unlock(&dquot->dq_dqb_lock);
 	}
 	if (reserve)
 		*inode_reserved_space(inode) -= number;
@@ -1927,6 +1934,7 @@ void dquot_free_inode(struct inode *inode)
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
+	struct dquot *dquot;
 	int index;
 
 	if (!inode_quota_active(inode))
@@ -1937,16 +1945,16 @@ void dquot_free_inode(struct inode *inode)
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		int wtype;
-
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		spin_lock(&dquots[cnt]->dq_dqb_lock);
-		wtype = info_idq_free(dquots[cnt], 1);
+		spin_lock(&dquot->dq_dqb_lock);
+		wtype = info_idq_free(dquot, 1);
 		if (wtype != QUOTA_NL_NOWARN)
-			prepare_warning(&warn[cnt], dquots[cnt], wtype);
-		dquot_decr_inodes(dquots[cnt], 1);
-		spin_unlock(&dquots[cnt]->dq_dqb_lock);
+			prepare_warning(&warn[cnt], dquot, wtype);
+		dquot_decr_inodes(dquot, 1);
+		spin_unlock(&dquot->dq_dqb_lock);
 	}
 	spin_unlock(&inode->i_lock);
 	mark_all_dquot_dirty(dquots);
@@ -1973,7 +1981,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	qsize_t rsv_space = 0;
 	qsize_t inode_usage = 1;
 	struct dquot *transfer_from[MAXQUOTAS] = {};
-	int cnt, ret = 0;
+	int cnt, index, ret = 0;
 	char is_valid[MAXQUOTAS] = {};
 	struct dquot_warn warn_to[MAXQUOTAS];
 	struct dquot_warn warn_from_inodes[MAXQUOTAS];
@@ -2062,8 +2070,16 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&dq_data_lock);
 
+	/*
+	 * These arrays are local and we hold dquot references so we don't need
+	 * the srcu protection but still take dquot_srcu to avoid warning in
+	 * mark_all_dquot_dirty().
+	 */
+	index = srcu_read_lock(&dquot_srcu);
 	mark_all_dquot_dirty(transfer_from);
 	mark_all_dquot_dirty(transfer_to);
+	srcu_read_unlock(&dquot_srcu, index);
+
 	flush_warnings(warn_to);
 	flush_warnings(warn_from_inodes);
 	flush_warnings(warn_from_space);
-- 
2.43.0

[PATCH 4.19 097/148] quota: Fix rcu annotations of inode dquot pointers

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 179b8c97ebf63429589f5afeba59a181fe70603e ]

Dquot pointers in i_dquot array in the inode are protected by
dquot_srcu. Annotate the array pointers with __rcu, perform the locked
dereferences with srcu_dereference_check() instead of plain reads, and
set the array elements with rcu_assign_pointer().

Fixes: b9ba6f94b238 ("quota: remove dqptr_sem")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402061900.rTuYDlo6-lkp@intel.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 66 ++++++++++++++++++++++++++++--------------------
 1 file changed, 39 insertions(+), 27 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 133ca865de976..6bdb44fb07a7f 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -399,7 +399,7 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 
 /* Dirtify all the dquots - this can block when journalling */
-static inline int mark_all_dquot_dirty(struct dquot * const *dquots)
+static inline int mark_all_dquot_dirty(struct dquot __rcu * const *dquots)
 {
 	int ret, err, cnt;
 	struct dquot *dquot;
@@ -996,14 +996,15 @@ struct dquot *dqget(struct super_block *sb, struct kqid qid)
 }
 EXPORT_SYMBOL(dqget);
 
-static inline struct dquot **i_dquot(struct inode *inode)
+static inline struct dquot __rcu **i_dquot(struct inode *inode)
 {
-	return inode->i_sb->s_op->get_dquots(inode);
+	/* Force __rcu for now until filesystems are fixed */
+	return (struct dquot __rcu **)inode->i_sb->s_op->get_dquots(inode);
 }
 
 static int dqinit_needed(struct inode *inode, int type)
 {
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	int cnt;
 
 	if (IS_NOQUOTA(inode))
@@ -1093,14 +1094,16 @@ static void remove_dquot_ref(struct super_block *sb, int type)
 		 */
 		spin_lock(&dq_data_lock);
 		if (!IS_NOQUOTA(inode)) {
-			struct dquot **dquots = i_dquot(inode);
-			struct dquot *dquot = dquots[type];
+			struct dquot __rcu **dquots = i_dquot(inode);
+			struct dquot *dquot = srcu_dereference_check(
+				dquots[type], &dquot_srcu,
+				lockdep_is_held(&dq_data_lock));
 
 #ifdef CONFIG_QUOTA_DEBUG
 			if (unlikely(inode_get_rsv_space(inode) > 0))
 				reserved = 1;
 #endif
-			dquots[type] = NULL;
+			rcu_assign_pointer(dquots[type], NULL);
 			if (dquot)
 				dqput(dquot);
 		}
@@ -1453,7 +1456,8 @@ static int inode_quota_active(const struct inode *inode)
 static int __dquot_initialize(struct inode *inode, int type)
 {
 	int cnt, init_needed = 0;
-	struct dquot **dquots, *got[MAXQUOTAS] = {};
+	struct dquot __rcu **dquots;
+	struct dquot *got[MAXQUOTAS] = {};
 	struct super_block *sb = inode->i_sb;
 	qsize_t rsv;
 	int ret = 0;
@@ -1528,7 +1532,7 @@ static int __dquot_initialize(struct inode *inode, int type)
 		if (!got[cnt])
 			continue;
 		if (!dquots[cnt]) {
-			dquots[cnt] = got[cnt];
+			rcu_assign_pointer(dquots[cnt], got[cnt]);
 			got[cnt] = NULL;
 			/*
 			 * Make quota reservation system happy if someone
@@ -1536,12 +1540,16 @@ static int __dquot_initialize(struct inode *inode, int type)
 			 */
 			rsv = inode_get_rsv_space(inode);
 			if (unlikely(rsv)) {
+				struct dquot *dquot = srcu_dereference_check(
+					dquots[cnt], &dquot_srcu,
+					lockdep_is_held(&dq_data_lock));
+
 				spin_lock(&inode->i_lock);
 				/* Get reservation again under proper lock */
 				rsv = __inode_get_rsv_space(inode);
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				dquots[cnt]->dq_dqb.dqb_rsvspace += rsv;
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
+				dquot->dq_dqb.dqb_rsvspace += rsv;
+				spin_unlock(&dquot->dq_dqb_lock);
 				spin_unlock(&inode->i_lock);
 			}
 		}
@@ -1563,7 +1571,7 @@ EXPORT_SYMBOL(dquot_initialize);
 
 bool dquot_initialize_needed(struct inode *inode)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	int i;
 
 	if (!inode_quota_active(inode))
@@ -1588,13 +1596,14 @@ EXPORT_SYMBOL(dquot_initialize_needed);
 static void __dquot_drop(struct inode *inode)
 {
 	int cnt;
-	struct dquot **dquots = i_dquot(inode);
+	struct dquot __rcu **dquots = i_dquot(inode);
 	struct dquot *put[MAXQUOTAS];
 
 	spin_lock(&dq_data_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		put[cnt] = dquots[cnt];
-		dquots[cnt] = NULL;
+		put[cnt] = srcu_dereference_check(dquots[cnt], &dquot_srcu,
+					lockdep_is_held(&dq_data_lock));
+		rcu_assign_pointer(dquots[cnt], NULL);
 	}
 	spin_unlock(&dq_data_lock);
 	dqput_all(put);
@@ -1602,7 +1611,7 @@ static void __dquot_drop(struct inode *inode)
 
 void dquot_drop(struct inode *inode)
 {
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	int cnt;
 
 	if (IS_NOQUOTA(inode))
@@ -1675,7 +1684,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
 	int reserve = flags & DQUOT_SPACE_RESERVE;
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 
 	if (!inode_quota_active(inode)) {
@@ -1745,7 +1754,7 @@ int dquot_alloc_inode(struct inode *inode)
 {
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	struct dquot *dquot;
 
 	if (!inode_quota_active(inode))
@@ -1790,7 +1799,7 @@ EXPORT_SYMBOL(dquot_alloc_inode);
  */
 int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int cnt, index;
 
@@ -1832,7 +1841,7 @@ EXPORT_SYMBOL(dquot_claim_space_nodirty);
  */
 void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int cnt, index;
 
@@ -1876,7 +1885,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 {
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int reserve = flags & DQUOT_SPACE_RESERVE, index;
 
@@ -1933,7 +1942,7 @@ void dquot_free_inode(struct inode *inode)
 {
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	struct dquot *dquot;
 	int index;
 
@@ -1980,6 +1989,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	qsize_t cur_space;
 	qsize_t rsv_space = 0;
 	qsize_t inode_usage = 1;
+	struct dquot __rcu **dquots;
 	struct dquot *transfer_from[MAXQUOTAS] = {};
 	int cnt, index, ret = 0;
 	char is_valid[MAXQUOTAS] = {};
@@ -2012,6 +2022,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	}
 	cur_space = __inode_get_bytes(inode);
 	rsv_space = __inode_get_rsv_space(inode);
+	dquots = i_dquot(inode);
 	/*
 	 * Build the transfer_from list, check limits, and update usage in
 	 * the target structures.
@@ -2026,7 +2037,8 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 		if (!sb_has_quota_active(inode->i_sb, cnt))
 			continue;
 		is_valid[cnt] = 1;
-		transfer_from[cnt] = i_dquot(inode)[cnt];
+		transfer_from[cnt] = srcu_dereference_check(dquots[cnt],
+				&dquot_srcu, lockdep_is_held(&dq_data_lock));
 		ret = dquot_add_inodes(transfer_to[cnt], inode_usage,
 				       &warn_to[cnt]);
 		if (ret)
@@ -2065,7 +2077,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 						  rsv_space);
 			spin_unlock(&transfer_from[cnt]->dq_dqb_lock);
 		}
-		i_dquot(inode)[cnt] = transfer_to[cnt];
+		rcu_assign_pointer(dquots[cnt], transfer_to[cnt]);
 	}
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&dq_data_lock);
@@ -2076,8 +2088,8 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	 * mark_all_dquot_dirty().
 	 */
 	index = srcu_read_lock(&dquot_srcu);
-	mark_all_dquot_dirty(transfer_from);
-	mark_all_dquot_dirty(transfer_to);
+	mark_all_dquot_dirty((struct dquot __rcu **)transfer_from);
+	mark_all_dquot_dirty((struct dquot __rcu **)transfer_to);
 	srcu_read_unlock(&dquot_srcu, index);
 
 	flush_warnings(warn_to);
-- 
2.43.0

[PATCH 4.19 098/148] perf thread_map: Free strlist on normal path in thread_map__new_by_tid_str()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 1eb3d924e3c0b8c27388b0583a989d757866efb6 ]

slist needs to be freed in both error path and normal path in
thread_map__new_by_tid_str().

Fixes: b52956c961be3a04 ("perf tools: Allow multiple threads or processes in record, stat, top")
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-6-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/thread_map.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/thread_map.c b/tools/perf/util/thread_map.c
index 5d467d8ae9abf..6ee38f2458040 100644
--- a/tools/perf/util/thread_map.c
+++ b/tools/perf/util/thread_map.c
@@ -313,13 +313,13 @@ struct thread_map *thread_map__new_by_tid_str(const char *tid_str)
 		threads->nr = ntasks;
 	}
 out:
+	strlist__delete(slist);
 	if (threads)
 		refcount_set(&threads->refcnt, 1);
 	return threads;
 
 out_free_threads:
 	zfree(&threads);
-	strlist__delete(slist);
 	goto out;
 }
 
-- 
2.43.0

[PATCH 4.19 099/148] drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit c4891d979c7668b195a0a75787967ec95a24ecef ]

Clean up a typo in pr_err() erroneously printing NI MC 'rdev->mc_fw->size'
during SMC firmware load. Log 'rdev->smc_fw->size' instead.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 6596afd48af4 ("drm/radeon/kms: add dpm support for btc (v3)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/ni.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 381b0255ff027..e2f8b68a999af 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -823,7 +823,7 @@ int ni_init_microcode(struct radeon_device *rdev)
 			err = 0;
 		} else if (rdev->smc_fw->size != smc_req_size) {
 			pr_err("ni_mc: Bogus length %zu in firmware \"%s\"\n",
-			       rdev->mc_fw->size, fw_name);
+			       rdev->smc_fw->size, fw_name);
 			err = -EINVAL;
 		}
 	}
-- 
2.43.0

[PATCH 4.19 100/148] ALSA: seq: fix function cast warnings

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit d7bf73809849463f76de42aad62c850305dd6c5d ]

clang-16 points out a control flow integrity (kcfi) issue when event
callbacks get converted to incompatible types:

sound/core/seq/seq_midi.c:135:30: error: cast from 'int (*)(struct snd_rawmidi_substream *, const char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  135 |                 snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
      |                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/core/seq/seq_virmidi.c:83:31: error: cast from 'int (*)(struct snd_rawmidi_substream *, const unsigned char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   83 |                         snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
      |                                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

For addressing those errors, introduce wrapper functions that are used
for callbacks and bridge to the actual function call with pointer
cast.

The code was originally added with the initial ALSA merge in linux-2.5.4.

[ the patch description shamelessly copied from Arnd's original patch
  -- tiwai ]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213101020.459183-1-arnd@kernel.org
Link: https://lore.kernel.org/r/20240213135343.16411-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_midi.c    | 8 +++++++-
 sound/core/seq/seq_virmidi.c | 9 ++++++++-
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/sound/core/seq/seq_midi.c b/sound/core/seq/seq_midi.c
index 9e0dabd3ce5f5..2bb6f21ac1964 100644
--- a/sound/core/seq/seq_midi.c
+++ b/sound/core/seq/seq_midi.c
@@ -125,6 +125,12 @@ static int dump_midi(struct snd_rawmidi_substream *substream, const char *buf, i
 	return 0;
 }
 
+/* callback for snd_seq_dump_var_event(), bridging to dump_midi() */
+static int __dump_midi(void *ptr, void *buf, int count)
+{
+	return dump_midi(ptr, buf, count);
+}
+
 static int event_process_midi(struct snd_seq_event *ev, int direct,
 			      void *private_data, int atomic, int hop)
 {
@@ -144,7 +150,7 @@ static int event_process_midi(struct snd_seq_event *ev, int direct,
 			pr_debug("ALSA: seq_midi: invalid sysex event flags = 0x%x\n", ev->flags);
 			return 0;
 		}
-		snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
+		snd_seq_dump_var_event(ev, __dump_midi, substream);
 		snd_midi_event_reset_decode(msynth->parser);
 	} else {
 		if (msynth->parser == NULL)
diff --git a/sound/core/seq/seq_virmidi.c b/sound/core/seq/seq_virmidi.c
index af9af89a44d4e..23975b86e1d4b 100644
--- a/sound/core/seq/seq_virmidi.c
+++ b/sound/core/seq/seq_virmidi.c
@@ -76,6 +76,13 @@ static void snd_virmidi_init_event(struct snd_virmidi *vmidi,
 /*
  * decode input event and put to read buffer of each opened file
  */
+
+/* callback for snd_seq_dump_var_event(), bridging to snd_rawmidi_receive() */
+static int dump_to_rawmidi(void *ptr, void *buf, int count)
+{
+	return snd_rawmidi_receive(ptr, buf, count);
+}
+
 static int snd_virmidi_dev_receive_event(struct snd_virmidi_dev *rdev,
 					 struct snd_seq_event *ev,
 					 bool atomic)
@@ -94,7 +101,7 @@ static int snd_virmidi_dev_receive_event(struct snd_virmidi_dev *rdev,
 		if (ev->type == SNDRV_SEQ_EVENT_SYSEX) {
 			if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) != SNDRV_SEQ_EVENT_LENGTH_VARIABLE)
 				continue;
-			snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
+			snd_seq_dump_var_event(ev, dump_to_rawmidi, vmidi->substream);
 			snd_midi_event_reset_decode(vmidi->parser);
 		} else {
 			len = snd_midi_event_decode(vmidi->parser, msg, sizeof(msg), ev);
-- 
2.43.0

[PATCH 4.19 101/148] media: go7007: add check of return value of go7007_read_addr()

[Sasha Levin]

From: Daniil Dulov <d.dulov@aladdin.ru>

[ Upstream commit 0b70530ee740861f4776ff724fcc25023df1799a ]

If go7007_read_addr() returns error channel is not assigned a value.
In this case go to allocfail.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 866b8695d67e ("Staging: add the go7007 video driver")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/go7007/go7007-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/go7007/go7007-usb.c b/drivers/media/usb/go7007/go7007-usb.c
index b84a6f6548610..957c07479713f 100644
--- a/drivers/media/usb/go7007/go7007-usb.c
+++ b/drivers/media/usb/go7007/go7007-usb.c
@@ -1206,7 +1206,9 @@ static int go7007_usb_probe(struct usb_interface *intf,
 				u16 channel;
 
 				/* read channel number from GPIO[1:0] */
-				go7007_read_addr(go, 0x3c81, &channel);
+				if (go7007_read_addr(go, 0x3c81, &channel))
+					goto allocfail;
+
 				channel &= 0x3;
 				go->board_id = GO7007_BOARDID_ADLINK_MPG24;
 				usb->board = board = &board_adlink_mpg24;
-- 
2.43.0

[PATCH 4.19 102/148] media: pvrusb2: fix pvr2_stream_callback casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 30baa4a96b23add91a87305baaeba82c4e109e1f ]

clang-16 complains about a control flow integrity (KCFI) issue in pvrusb2,
which casts three different prototypes into pvr2_stream_callback:

drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:1070:30: error: cast from 'void (*)(struct pvr2_v4l2_fh *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1070 |         pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh);
      |                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-context.c:110:6: error: cast from 'void (*)(struct pvr2_context *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  110 |                                         (void (*)(void *))pvr2_context_notify,
      |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-dvb.c:152:6: error: cast from 'void (*)(struct pvr2_dvb_adapter *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  152 |                                  (pvr2_stream_callback) pvr2_dvb_notify, adap);
      |                                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Change the functions to actually take a void* argument so the cast is no longer
needed.

Fixes: bb8ce9d9143c ("V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-context.c | 8 ++++----
 drivers/media/usb/pvrusb2/pvrusb2-dvb.c     | 6 ++++--
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c    | 6 ++++--
 3 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c
index 9236463ba269f..28a9cfef8f9f2 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-context.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-context.c
@@ -99,8 +99,10 @@ static void pvr2_context_destroy(struct pvr2_context *mp)
 }
 
 
-static void pvr2_context_notify(struct pvr2_context *mp)
+static void pvr2_context_notify(void *ptr)
 {
+	struct pvr2_context *mp = ptr;
+
 	pvr2_context_set_notify(mp,!0);
 }
 
@@ -115,9 +117,7 @@ static void pvr2_context_check(struct pvr2_context *mp)
 		pvr2_trace(PVR2_TRACE_CTXT,
 			   "pvr2_context %p (initialize)", mp);
 		/* Finish hardware initialization */
-		if (pvr2_hdw_initialize(mp->hdw,
-					(void (*)(void *))pvr2_context_notify,
-					mp)) {
+		if (pvr2_hdw_initialize(mp->hdw, pvr2_context_notify, mp)) {
 			mp->video_stream.stream =
 				pvr2_hdw_get_video_stream(mp->hdw);
 			/* Trigger interface initialization.  By doing this
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-dvb.c b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
index 4b32b21411695..f326ab9a272e6 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
@@ -97,8 +97,10 @@ static int pvr2_dvb_feed_thread(void *data)
 	return stat;
 }
 
-static void pvr2_dvb_notify(struct pvr2_dvb_adapter *adap)
+static void pvr2_dvb_notify(void *ptr)
 {
+	struct pvr2_dvb_adapter *adap = ptr;
+
 	wake_up(&adap->buffer_wait_data);
 }
 
@@ -158,7 +160,7 @@ static int pvr2_dvb_stream_do_start(struct pvr2_dvb_adapter *adap)
 	}
 
 	pvr2_stream_set_callback(pvr->video_stream.stream,
-				 (pvr2_stream_callback) pvr2_dvb_notify, adap);
+				 pvr2_dvb_notify, adap);
 
 	ret = pvr2_stream_set_buffer_count(stream, PVR2_DVB_BUFFER_COUNT);
 	if (ret < 0) return ret;
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index 04d334152eae2..5e2c9aa649648 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -1055,8 +1055,10 @@ static int pvr2_v4l2_open(struct file *file)
 }
 
 
-static void pvr2_v4l2_notify(struct pvr2_v4l2_fh *fhp)
+static void pvr2_v4l2_notify(void *ptr)
 {
+	struct pvr2_v4l2_fh *fhp = ptr;
+
 	wake_up(&fhp->wait_data);
 }
 
@@ -1089,7 +1091,7 @@ static int pvr2_v4l2_iosetup(struct pvr2_v4l2_fh *fh)
 
 	hdw = fh->channel.mc_head->hdw;
 	sp = fh->pdi->stream->stream;
-	pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh);
+	pvr2_stream_set_callback(sp, pvr2_v4l2_notify, fh);
 	pvr2_hdw_set_stream_type(hdw,fh->pdi->config);
 	if ((ret = pvr2_hdw_set_streaming(hdw,!0)) < 0) return ret;
 	return pvr2_ioread_set_enabled(fh->rhp,!0);
-- 
2.43.0

[PATCH 4.19 103/148] firmware: qcom: scm: Add WLAN VMID for Qualcomm SCM interface

[Sasha Levin]

From: Govind Singh <govinds@codeaurora.org>

[ Upstream commit cc53aabcc283c36274d3f3ce9adc4b40c21d4838 ]

Add WLAN related VMID's to support wlan driver to set up
the remote's permissions call via TrustZone.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Stable-dep-of: 117e7dc697c2 ("clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/qcom_scm.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 116b81ac442ad..1637385bcc171 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, 2018, The Linux Foundation. All rights reserved.
  * Copyright (C) 2015 Linaro Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -33,6 +33,8 @@ struct qcom_scm_vmperm {
 
 #define QCOM_SCM_VMID_HLOS       0x3
 #define QCOM_SCM_VMID_MSS_MSA    0xF
+#define QCOM_SCM_VMID_WLAN       0x18
+#define QCOM_SCM_VMID_WLAN_CE    0x19
 #define QCOM_SCM_PERM_READ       0x4
 #define QCOM_SCM_PERM_WRITE      0x2
 #define QCOM_SCM_PERM_EXEC       0x1
-- 
2.43.0

[PATCH 4.19 104/148] clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 117e7dc697c2739d754db8fe0c1e2d4f1f5d5f82 ]

SDM845 downstream uses non-default values for GDSC internal waits.
Program them accordingly to avoid surprises.

Fixes: 81351776c9fb ("clk: qcom: Add display clock controller driver for SDM845")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 6
Link: https://lore.kernel.org/r/20240103-topic-845gdsc-v1-1-368efbe1a61d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/dispcc-sdm845.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/qcom/dispcc-sdm845.c b/drivers/clk/qcom/dispcc-sdm845.c
index 0cc4909b5dbef..cb7a2d9247b04 100644
--- a/drivers/clk/qcom/dispcc-sdm845.c
+++ b/drivers/clk/qcom/dispcc-sdm845.c
@@ -569,6 +569,8 @@ static struct clk_branch disp_cc_mdss_vsync_clk = {
 
 static struct gdsc mdss_gdsc = {
 	.gdscr = 0x3000,
+	.en_few_wait_val = 0x6,
+	.en_rest_wait_val = 0x5,
 	.pd = {
 		.name = "mdss_gdsc",
 	},
-- 
2.43.0

[PATCH 4.19 105/148] drm/mediatek: dsi: Fix DSI RGB666 formats and definitions

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit fae6f815505301b92d9113764f4d76d0bfe45607 ]

The register bits definitions for RGB666 formats are wrong in multiple
ways: first, in the DSI_PS_SEL bits region, the Packed 18-bits RGB666
format is selected with bit 1, while the Loosely Packed one is bit 2,
and second - the definition name "LOOSELY_PS_18BIT_RGB666" is wrong
because the loosely packed format is 24 bits instead!

Either way, functions mtk_dsi_ps_control_vact() and mtk_dsi_ps_control()
do not even agree on the DSI_PS_SEL bit to set in DSI_PSCTRL: one sets
loosely packed (24) on RGB666, the other sets packed (18), and the other
way around for RGB666_PACKED.

Fixing this entire stack of issues is done in one go:
 - Use the correct bit for the Loosely Packed RGB666 definition
 - Rename LOOSELY_PS_18BIT_RGB666 to LOOSELY_PS_24BIT_RGB666
 - Change ps_bpp_mode in mtk_dsi_ps_control_vact() to set:
    - Loosely Packed, 24-bits for MIPI_DSI_FMT_RGB666
    - Packed, 18-bits for MIPI_DSI_FMT_RGB666_PACKED

Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a629a69c27568..6a7a5a485bad7 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -70,8 +70,8 @@
 #define DSI_PS_WC			0x3fff
 #define DSI_PS_SEL			(3 << 16)
 #define PACKED_PS_16BIT_RGB565		(0 << 16)
-#define LOOSELY_PS_18BIT_RGB666		(1 << 16)
-#define PACKED_PS_18BIT_RGB666		(2 << 16)
+#define PACKED_PS_18BIT_RGB666		(1 << 16)
+#define LOOSELY_PS_24BIT_RGB666		(2 << 16)
 #define PACKED_PS_24BIT_RGB888		(3 << 16)
 
 #define DSI_VSA_NL		0x20
@@ -327,10 +327,10 @@ static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi)
 		ps_bpp_mode |= PACKED_PS_24BIT_RGB888;
 		break;
 	case MIPI_DSI_FMT_RGB666:
-		ps_bpp_mode |= PACKED_PS_18BIT_RGB666;
+		ps_bpp_mode |= LOOSELY_PS_24BIT_RGB666;
 		break;
 	case MIPI_DSI_FMT_RGB666_PACKED:
-		ps_bpp_mode |= LOOSELY_PS_18BIT_RGB666;
+		ps_bpp_mode |= PACKED_PS_18BIT_RGB666;
 		break;
 	case MIPI_DSI_FMT_RGB565:
 		ps_bpp_mode |= PACKED_PS_16BIT_RGB565;
@@ -381,7 +381,7 @@ static void mtk_dsi_ps_control(struct mtk_dsi *dsi)
 		dsi_tmp_buf_bpp = 3;
 		break;
 	case MIPI_DSI_FMT_RGB666:
-		tmp_reg = LOOSELY_PS_18BIT_RGB666;
+		tmp_reg = LOOSELY_PS_24BIT_RGB666;
 		dsi_tmp_buf_bpp = 3;
 		break;
 	case MIPI_DSI_FMT_RGB666_PACKED:
-- 
2.43.0

[PATCH 4.19 106/148] PCI: Mark 3ware-9650SE Root Port Extended Tags as broken

[Sasha Levin]

From: Jörg Wedekind <joerg@wedekind.de>

[ Upstream commit baf67aefbe7d7deafa59ca49612d163f8889934c ]

Per PCIe r6.1, sec 2.2.6.2 and 7.5.3.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.

Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them.  If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.

The 3ware 9650SE seems to have issues with handling 8-bit tags. Mark it as
broken.

This fixes PCI Parity Errors like :

  3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing.

Link: https://lore.kernel.org/r/20240219132811.8351-1-joerg@wedekind.de
Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425
Signed-off-by: Jörg Wedekind <joerg@wedekind.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 99a8a24ea79dc..bb51820890965 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5189,6 +5189,7 @@ static void quirk_no_ext_tags(struct pci_dev *pdev)
 
 	pci_walk_bus(bridge->bus, pci_configure_extended_tags, NULL);
 }
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_3WARE, 0x1004, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0132, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0140, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0141, quirk_no_ext_tags);
-- 
2.43.0

[PATCH 4.19 107/148] clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 74e39f526d95c0c119ada1874871ee328c59fbee ]

The gates are stored in 'hi3519_gate_clks', not 'hi3519_mux_clks'.
This is also in line with how hisi_clk_register_gate() is called in the
probe.

Fixes: 224b3b262c52 ("clk: hisilicon: hi3519: add driver remove path and fix some issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c3f1877c9a0886fa35c949c8f0ef25547f284f18.1704912510.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/hisilicon/clk-hi3519.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/hisilicon/clk-hi3519.c b/drivers/clk/hisilicon/clk-hi3519.c
index 51b173ef1ddad..d789735160a2b 100644
--- a/drivers/clk/hisilicon/clk-hi3519.c
+++ b/drivers/clk/hisilicon/clk-hi3519.c
@@ -142,7 +142,7 @@ static void hi3519_clk_unregister(struct platform_device *pdev)
 	of_clk_del_provider(pdev->dev.of_node);
 
 	hisi_clk_unregister_gate(hi3519_gate_clks,
-				ARRAY_SIZE(hi3519_mux_clks),
+				ARRAY_SIZE(hi3519_gate_clks),
 				crg->clk_data);
 	hisi_clk_unregister_mux(hi3519_mux_clks,
 				ARRAY_SIZE(hi3519_mux_clks),
-- 
2.43.0

[PATCH 4.19 108/148] drm/tegra: put drm_gem_object ref on error in tegra_fb_create

[Sasha Levin]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 32e5a120a5105bce01561978ee55aee8e40ac0dc ]

Inside tegra_fb_create(), drm_gem_object_lookup() increments ref count of
the found object. But if the following size check fails then the last
found object's ref count should be put there as the unreferencing loop
can't detect this situation.

Found by Linux Verification Center (linuxtesting.org).

Fixes: de2ba664c30f ("gpu: host1x: drm: Add memory manager and fb")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215093356.12067-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/fb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/tegra/fb.c b/drivers/gpu/drm/tegra/fb.c
index 4c22cdded3c21..e39d33f66d795 100644
--- a/drivers/gpu/drm/tegra/fb.c
+++ b/drivers/gpu/drm/tegra/fb.c
@@ -157,6 +157,7 @@ struct drm_framebuffer *tegra_fb_create(struct drm_device *drm,
 
 		if (gem->size < size) {
 			err = -EINVAL;
+			drm_gem_object_put(gem);
 			goto unreference;
 		}
 
-- 
2.43.0

[PATCH 4.19 109/148] mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit d2b0680cf3b05490b579e71b0df6e07451977745 ]

of_parse_phandle() returns a device_node with refcount incremented, which
the callee needs to call of_node_put() on when done. We should only call
of_node_put() when the property argument is provided though as otherwise
nothing has taken a reference on the node.

Fixes: 45330bb43421 ("mfd: syscon: Allow property as NULL in syscon_regmap_lookup_by_phandle")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220115012.471689-2-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/syscon.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index b6d05cd934e66..d73869889166f 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -211,7 +211,9 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
 		return ERR_PTR(-ENODEV);
 
 	regmap = syscon_node_to_regmap(syscon_np);
-	of_node_put(syscon_np);
+
+	if (property)
+		of_node_put(syscon_np);
 
 	return regmap;
 }
-- 
2.43.0

[PATCH 4.19 110/148] crypto: arm - Rename functions to avoid conflict with crypto/sha256.h

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e4dcc1be15268b6d34de3968f906577591521bd5 ]

Rename static / file-local functions so that they do not conflict with
the functions declared in crypto/sha256.h.

This is a preparation patch for folding crypto/sha256.h into crypto/sha.h.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 53cc9baeb9bc ("crypto: arm/sha - fix function cast warnings")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/crypto/sha256_glue.c      |  8 ++++----
 arch/arm/crypto/sha256_neon_glue.c | 24 ++++++++++++------------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c
index 0ae900e778f3b..040c744ef9f50 100644
--- a/arch/arm/crypto/sha256_glue.c
+++ b/arch/arm/crypto/sha256_glue.c
@@ -44,7 +44,7 @@ int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 }
 EXPORT_SYMBOL(crypto_sha256_arm_update);
 
-static int sha256_final(struct shash_desc *desc, u8 *out)
+static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
 {
 	sha256_base_do_finalize(desc,
 				(sha256_block_fn *)sha256_block_data_order);
@@ -56,7 +56,7 @@ int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
 {
 	sha256_base_do_update(desc, data, len,
 			      (sha256_block_fn *)sha256_block_data_order);
-	return sha256_final(desc, out);
+	return crypto_sha256_arm_final(desc, out);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_finup);
 
@@ -64,7 +64,7 @@ static struct shash_alg algs[] = { {
 	.digestsize	=	SHA256_DIGEST_SIZE,
 	.init		=	sha256_base_init,
 	.update		=	crypto_sha256_arm_update,
-	.final		=	sha256_final,
+	.final		=	crypto_sha256_arm_final,
 	.finup		=	crypto_sha256_arm_finup,
 	.descsize	=	sizeof(struct sha256_state),
 	.base		=	{
@@ -78,7 +78,7 @@ static struct shash_alg algs[] = { {
 	.digestsize	=	SHA224_DIGEST_SIZE,
 	.init		=	sha224_base_init,
 	.update		=	crypto_sha256_arm_update,
-	.final		=	sha256_final,
+	.final		=	crypto_sha256_arm_final,
 	.finup		=	crypto_sha256_arm_finup,
 	.descsize	=	sizeof(struct sha256_state),
 	.base		=	{
diff --git a/arch/arm/crypto/sha256_neon_glue.c b/arch/arm/crypto/sha256_neon_glue.c
index 1d82c6cd31a41..8d296529c8ba7 100644
--- a/arch/arm/crypto/sha256_neon_glue.c
+++ b/arch/arm/crypto/sha256_neon_glue.c
@@ -29,8 +29,8 @@
 asmlinkage void sha256_block_data_order_neon(u32 *digest, const void *data,
 					     unsigned int num_blks);
 
-static int sha256_update(struct shash_desc *desc, const u8 *data,
-			 unsigned int len)
+static int crypto_sha256_neon_update(struct shash_desc *desc, const u8 *data,
+				     unsigned int len)
 {
 	struct sha256_state *sctx = shash_desc_ctx(desc);
 
@@ -46,8 +46,8 @@ static int sha256_update(struct shash_desc *desc, const u8 *data,
 	return 0;
 }
 
-static int sha256_finup(struct shash_desc *desc, const u8 *data,
-			unsigned int len, u8 *out)
+static int crypto_sha256_neon_finup(struct shash_desc *desc, const u8 *data,
+				    unsigned int len, u8 *out)
 {
 	if (!may_use_simd())
 		return crypto_sha256_arm_finup(desc, data, len, out);
@@ -63,17 +63,17 @@ static int sha256_finup(struct shash_desc *desc, const u8 *data,
 	return sha256_base_finish(desc, out);
 }
 
-static int sha256_final(struct shash_desc *desc, u8 *out)
+static int crypto_sha256_neon_final(struct shash_desc *desc, u8 *out)
 {
-	return sha256_finup(desc, NULL, 0, out);
+	return crypto_sha256_neon_finup(desc, NULL, 0, out);
 }
 
 struct shash_alg sha256_neon_algs[] = { {
 	.digestsize	=	SHA256_DIGEST_SIZE,
 	.init		=	sha256_base_init,
-	.update		=	sha256_update,
-	.final		=	sha256_final,
-	.finup		=	sha256_finup,
+	.update		=	crypto_sha256_neon_update,
+	.final		=	crypto_sha256_neon_final,
+	.finup		=	crypto_sha256_neon_finup,
 	.descsize	=	sizeof(struct sha256_state),
 	.base		=	{
 		.cra_name	=	"sha256",
@@ -85,9 +85,9 @@ struct shash_alg sha256_neon_algs[] = { {
 }, {
 	.digestsize	=	SHA224_DIGEST_SIZE,
 	.init		=	sha224_base_init,
-	.update		=	sha256_update,
-	.final		=	sha256_final,
-	.finup		=	sha256_finup,
+	.update		=	crypto_sha256_neon_update,
+	.final		=	crypto_sha256_neon_final,
+	.finup		=	crypto_sha256_neon_finup,
 	.descsize	=	sizeof(struct sha256_state),
 	.base		=	{
 		.cra_name	=	"sha224",
-- 
2.43.0

[PATCH 4.19 111/148] crypto: arm/sha - fix function cast warnings

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 53cc9baeb9bc2a187eb9c9790d30995148852b12 ]

clang-16 warns about casting between incompatible function types:

arch/arm/crypto/sha256_glue.c:37:5: error: cast from 'void (*)(u32 *, const void *, unsigned int)' (aka 'void (*)(unsigned int *, const void *, unsigned int)') to 'sha256_block_fn *' (aka 'void (*)(struct sha256_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   37 |                                 (sha256_block_fn *)sha256_block_data_order);
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/sha512-glue.c:34:3: error: cast from 'void (*)(u64 *, const u8 *, int)' (aka 'void (*)(unsigned long long *, const unsigned char *, int)') to 'sha512_block_fn *' (aka 'void (*)(struct sha512_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   34 |                 (sha512_block_fn *)sha512_block_data_order);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix the prototypes for the assembler functions to match the typedef.
The code already relies on the digest being the first part of the
state structure, so there is no change in behavior.

Fixes: c80ae7ca3726 ("crypto: arm/sha512 - accelerated SHA-512 using ARM generic ASM and NEON")
Fixes: b59e2ae3690c ("crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/crypto/sha256_glue.c | 13 +++++--------
 arch/arm/crypto/sha512-glue.c | 12 +++++-------
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c
index 040c744ef9f50..a46878560d77d 100644
--- a/arch/arm/crypto/sha256_glue.c
+++ b/arch/arm/crypto/sha256_glue.c
@@ -30,8 +30,8 @@
 
 #include "sha256_glue.h"
 
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
+asmlinkage void sha256_block_data_order(struct sha256_state *state,
+					const u8 *data, int num_blks);
 
 int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 			     unsigned int len)
@@ -39,23 +39,20 @@ int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 	/* make sure casting to sha256_block_fn() is safe */
 	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
 
-	return sha256_base_do_update(desc, data, len,
-				(sha256_block_fn *)sha256_block_data_order);
+	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_update);
 
 static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha256_base_do_finalize(desc,
-				(sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_finalize(desc, sha256_block_data_order);
 	return sha256_base_finish(desc, out);
 }
 
 int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
 			    unsigned int len, u8 *out)
 {
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_update(desc, data, len, sha256_block_data_order);
 	return crypto_sha256_arm_final(desc, out);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_finup);
diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c
index 86540cd4a6faa..242d0ef08dfef 100644
--- a/arch/arm/crypto/sha512-glue.c
+++ b/arch/arm/crypto/sha512-glue.c
@@ -28,27 +28,25 @@ MODULE_ALIAS_CRYPTO("sha512");
 MODULE_ALIAS_CRYPTO("sha384-arm");
 MODULE_ALIAS_CRYPTO("sha512-arm");
 
-asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks);
+asmlinkage void sha512_block_data_order(struct sha512_state *state,
+					u8 const *src, int blocks);
 
 int sha512_arm_update(struct shash_desc *desc, const u8 *data,
 		      unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
 }
 
 int sha512_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_finalize(desc, sha512_block_data_order);
 	return sha512_base_finish(desc, out);
 }
 
 int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
 		     unsigned int len, u8 *out)
 {
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_update(desc, data, len, sha512_block_data_order);
 	return sha512_arm_final(desc, out);
 }
 
-- 
2.43.0

[PATCH 4.19 112/148] mtd: rawnand: lpc32xx_mlc: fix irq handler prototype

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 347b828882e6334690e7003ce5e2fe5f233dc508 ]

clang-16 warns about mismatched function prototypes:

drivers/mtd/nand/raw/lpc32xx_mlc.c:783:29: error: cast from 'irqreturn_t (*)(int, struct lpc32xx_nand_host *)' (aka 'enum irqreturn (*)(int, struct lpc32xx_nand_host *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Change the interrupt handler to the normal way of just passing
a void* pointer and converting it inside the function..

Fixes: 70f7cb78ec53 ("mtd: add LPC32xx MLC NAND driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240213100146.455811-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/lpc32xx_mlc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index d240b8ff40cad..507b2bd58f734 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -316,8 +316,9 @@ static int lpc32xx_nand_device_ready(struct mtd_info *mtd)
 	return 0;
 }
 
-static irqreturn_t lpc3xxx_nand_irq(int irq, struct lpc32xx_nand_host *host)
+static irqreturn_t lpc3xxx_nand_irq(int irq, void *data)
 {
+	struct lpc32xx_nand_host *host = data;
 	uint8_t sr;
 
 	/* Clear interrupt flag by reading status */
@@ -790,7 +791,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 		goto release_dma_chan;
 	}
 
-	if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
+	if (request_irq(host->irq, &lpc3xxx_nand_irq,
 			IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
 		dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
 		res = -ENXIO;
-- 
2.43.0

[PATCH 4.19 113/148] ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit e3741a8d28a1137f8b19ae6f3d6e3be69a454a0a ]

By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.

However there is no justification for this:

* If the codec needs MCLK for its operation, mclk-fs is expected to be set
  according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
  minimum the divider between SCLK and MCLK can do.

Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.

Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm-interface.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index 01cc551a8e3fa..2a7ea41fc49e5 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -258,8 +258,8 @@ static int axg_tdm_iface_set_sclk(struct snd_soc_dai *dai,
 	srate = iface->slots * iface->slot_width * params_rate(params);
 
 	if (!iface->mclk_rate) {
-		/* If no specific mclk is requested, default to bit clock * 4 */
-		clk_set_rate(iface->mclk, 4 * srate);
+		/* If no specific mclk is requested, default to bit clock * 2 */
+		clk_set_rate(iface->mclk, 2 * srate);
 	} else {
 		/* Check if we can actually get the bit clock from mclk */
 		if (iface->mclk_rate % srate) {
-- 
2.43.0

[PATCH 4.19 114/148] drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int()

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 7cf1ad2fe10634238b38442a851d89514cb14ea2 ]

Missing break statement in the ATOM_ARG_IMM case of a switch statement,
adds the missing break statement, ensuring that the program's control
flow is as intended.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/atom.c:323 atom_get_src_int() warn: ignoring unreachable code.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: Jammy Zhou <Jammy.Zhou@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/atom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/atom.c b/drivers/gpu/drm/amd/amdgpu/atom.c
index 0222bb7ea49b4..805ac556635d1 100644
--- a/drivers/gpu/drm/amd/amdgpu/atom.c
+++ b/drivers/gpu/drm/amd/amdgpu/atom.c
@@ -306,7 +306,7 @@ static uint32_t atom_get_src_int(atom_exec_context *ctx, uint8_t attr,
 				DEBUG("IMM 0x%02X\n", val);
 			return val;
 		}
-		return 0;
+		break;
 	case ATOM_ARG_PLL:
 		idx = U8(*ptr);
 		(*ptr)++;
-- 
2.43.0

[PATCH 4.19 115/148] media: pvrusb2: fix uaf in pvr2_context_set_notify

[Sasha Levin]

From: Edward Adam Davis <eadavis@qq.com>

[ Upstream commit 0a0b79ea55de8514e1750884e5fec77f9fdd01ee ]

[Syzbot reported]
BUG: KASAN: slab-use-after-free in pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35
Read of size 4 at addr ffff888113aeb0d8 by task kworker/1:1/26

CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.8.0-rc1-syzkaller-00046-gf1a27f081c1f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0xc4/0x620 mm/kasan/report.c:488
 kasan_report+0xda/0x110 mm/kasan/report.c:601
 pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35
 pvr2_context_notify drivers/media/usb/pvrusb2/pvrusb2-context.c:95 [inline]
 pvr2_context_disconnect+0x94/0xb0 drivers/media/usb/pvrusb2/pvrusb2-context.c:272

Freed by task 906:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640
poison_slab_object mm/kasan/common.c:241 [inline]
__kasan_slab_free+0x106/0x1b0 mm/kasan/common.c:257
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2121 [inline]
slab_free mm/slub.c:4299 [inline]
kfree+0x105/0x340 mm/slub.c:4409
pvr2_context_check drivers/media/usb/pvrusb2/pvrusb2-context.c:137 [inline]
pvr2_context_thread_func+0x69d/0x960 drivers/media/usb/pvrusb2/pvrusb2-context.c:158

[Analyze]
Task A set disconnect_flag = !0, which resulted in Task B's condition being met
and releasing mp, leading to this issue.

[Fix]
Place the disconnect_flag assignment operation after all code in pvr2_context_disconnect()
to avoid this issue.

Reported-and-tested-by: syzbot+ce750e124675d4599449@syzkaller.appspotmail.com
Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-context.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c
index 28a9cfef8f9f2..698b2cf65526d 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-context.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-context.c
@@ -276,9 +276,9 @@ static void pvr2_context_exit(struct pvr2_context *mp)
 void pvr2_context_disconnect(struct pvr2_context *mp)
 {
 	pvr2_hdw_disconnect(mp->hdw);
-	mp->disconnect_flag = !0;
 	if (!pvr2_context_shutok())
 		pvr2_context_notify(mp);
+	mp->disconnect_flag = !0;
 }
 
 
-- 
2.43.0

[PATCH 4.19 116/148] media: dvb-frontends: avoid stack overflow warnings with clang

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 7a4cf27d1f0538f779bf31b8c99eda394e277119 ]

A previous patch worked around a KASAN issue in stv0367, now a similar
problem showed up with clang:

drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than]
 1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe)

Rework the stv0367_writereg() function to be simpler and mark both
register access functions as noinline_for_stack so the temporary
i2c_msg structures do not get duplicated on the stack when KASAN_STACK
is enabled.

Fixes: 3cd890dbe2a4 ("media: dvb-frontends: fix i2c access helpers for KASAN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/stv0367.c | 34 +++++++--------------------
 1 file changed, 8 insertions(+), 26 deletions(-)

diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c
index 49f4472f09fa8..7a5b27de725e0 100644
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -128,50 +128,32 @@ static const s32 stv0367cab_RF_LookUp2[RF_LOOKUP_TABLE2_SIZE][RF_LOOKUP_TABLE2_S
 	}
 };
 
-static
-int stv0367_writeregs(struct stv0367_state *state, u16 reg, u8 *data, int len)
+static noinline_for_stack
+int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
 {
-	u8 buf[MAX_XFER_SIZE];
+	u8 buf[3] = { MSB(reg), LSB(reg), data };
 	struct i2c_msg msg = {
 		.addr = state->config->demod_address,
 		.flags = 0,
 		.buf = buf,
-		.len = len + 2
+		.len = 3,
 	};
 	int ret;
 
-	if (2 + len > sizeof(buf)) {
-		printk(KERN_WARNING
-		       "%s: i2c wr reg=%04x: len=%d is too big!\n",
-		       KBUILD_MODNAME, reg, len);
-		return -EINVAL;
-	}
-
-
-	buf[0] = MSB(reg);
-	buf[1] = LSB(reg);
-	memcpy(buf + 2, data, len);
-
 	if (i2cdebug)
 		printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__,
-			state->config->demod_address, reg, buf[2]);
+			state->config->demod_address, reg, data);
 
 	ret = i2c_transfer(state->i2c, &msg, 1);
 	if (ret != 1)
 		printk(KERN_ERR "%s: i2c write error! ([%02x] %02x: %02x)\n",
-			__func__, state->config->demod_address, reg, buf[2]);
+			__func__, state->config->demod_address, reg, data);
 
 	return (ret != 1) ? -EREMOTEIO : 0;
 }
 
-static int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
-{
-	u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
-
-	return stv0367_writeregs(state, reg, &tmp, 1);
-}
-
-static u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
+static noinline_for_stack
+u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
 {
 	u8 b0[] = { 0, 0 };
 	u8 b1[] = { 0 };
-- 
2.43.0

[PATCH 4.19 117/148] media: go7007: fix a memleak in go7007_load_encoder

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit b9b683844b01d171a72b9c0419a2d760d946ee12 ]

In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without
a deallocation thereafter. After the following call chain:

saa7134_go7007_init
  |-> go7007_boot_encoder
        |-> go7007_load_encoder
  |-> kfree(go)

go is freed and thus bounce is leaked.

Fixes: 95ef39403f89 ("[media] go7007: remember boot firmware")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/go7007/go7007-driver.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/go7007/go7007-driver.c b/drivers/media/usb/go7007/go7007-driver.c
index c7b5a3321cd74..15f78d3ce3bac 100644
--- a/drivers/media/usb/go7007/go7007-driver.c
+++ b/drivers/media/usb/go7007/go7007-driver.c
@@ -88,7 +88,7 @@ static int go7007_load_encoder(struct go7007 *go)
 	const struct firmware *fw_entry;
 	char fw_name[] = "go7007/go7007fw.bin";
 	void *bounce;
-	int fw_len, rv = 0;
+	int fw_len;
 	u16 intr_val, intr_data;
 
 	if (go->boot_fw == NULL) {
@@ -117,9 +117,11 @@ static int go7007_load_encoder(struct go7007 *go)
 	    go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
 			(intr_val & ~0x1) != 0x5a5a) {
 		v4l2_err(go, "error transferring firmware\n");
-		rv = -1;
+		kfree(go->boot_fw);
+		go->boot_fw = NULL;
+		return -1;
 	}
-	return rv;
+	return 0;
 }
 
 MODULE_FIRMWARE("go7007/go7007fw.bin");
-- 
2.43.0

[PATCH 4.19 118/148] drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit c958e86e9cc1b48cac004a6e245154dfba8e163b ]

It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().

pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.

Consider the following case:

CPU1                              CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
                                  step 1:
                                  mtk_drm_crtc_atomic_flush:
                                  mtk_drm_crtc_update_config(
                                      !!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
                                  pending_needs_vblank set to true,

                                  step 2:
                                  mtk_crtc_ddp_irq ->
                                  mtk_drm_finish_page_flip called again,
                                  pending_needs_vblank is still true
                                  //null pointer

Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240223212404.3709690-1-hsinyi@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index eac9caf322f90..fb7262ed9b699 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -79,11 +79,13 @@ static void mtk_drm_crtc_finish_page_flip(struct mtk_drm_crtc *mtk_crtc)
 	struct drm_crtc *crtc = &mtk_crtc->base;
 	unsigned long flags;
 
-	spin_lock_irqsave(&crtc->dev->event_lock, flags);
-	drm_crtc_send_vblank_event(crtc, mtk_crtc->event);
-	drm_crtc_vblank_put(crtc);
-	mtk_crtc->event = NULL;
-	spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+	if (mtk_crtc->event) {
+		spin_lock_irqsave(&crtc->dev->event_lock, flags);
+		drm_crtc_send_vblank_event(crtc, mtk_crtc->event);
+		drm_crtc_vblank_put(crtc);
+		mtk_crtc->event = NULL;
+		spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+	}
 }
 
 static void mtk_drm_finish_page_flip(struct mtk_drm_crtc *mtk_crtc)
-- 
2.43.0

[PATCH 4.19 119/148] powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks

[Sasha Levin]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit ad86d7ee43b22aa2ed60fb982ae94b285c1be671 ]

Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
in one of the system throws below error:

 ---Logs---
 # perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles
  hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event]

 # perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel.
failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/

 Performance counter stats for 'system wide':

   <not supported>      hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/

       2.000700771 seconds time elapsed

The above error is because of the hcall failure as required
permission "Enable Performance Information Collection" is not set.
Based on current code, single_gpci_request function did not check the
error type incase hcall fails and by default returns EINVAL. But we can
have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with
detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly.

Fix this issue by adding new checks in the single_gpci_request and
h_gpci_event_init functions.

Result after fix patch changes:

 # perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Error:
No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event.

Fixes: 220a0c609ad1 ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface")
Reported-by: Akanksha J N <akanksha@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122847.101162-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/hv-gpci.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c
index 126409bb5626e..8ae70b5952a54 100644
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -157,6 +157,20 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index,
 
 	ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
 			virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
+
+	/*
+	 * ret value as 'H_PARAMETER' with detail_rc as 'GEN_BUF_TOO_SMALL',
+	 * specifies that the current buffer size cannot accommodate
+	 * all the information and a partial buffer returned.
+	 * Since in this function we are only accessing data for a given starting index,
+	 * we don't need to accommodate whole data and can get required count by
+	 * accessing first entry data.
+	 * Hence hcall fails only incase the ret value is other than H_SUCCESS or
+	 * H_PARAMETER with detail_rc value as GEN_BUF_TOO_SMALL(0x1B).
+	 */
+	if (ret == H_PARAMETER && be32_to_cpu(arg->params.detail_rc) == 0x1B)
+		ret = 0;
+
 	if (ret) {
 		pr_devel("hcall failed: 0x%lx\n", ret);
 		goto out;
@@ -221,6 +235,7 @@ static int h_gpci_event_init(struct perf_event *event)
 {
 	u64 count;
 	u8 length;
+	unsigned long ret;
 
 	/* Not our event */
 	if (event->attr.type != event->pmu->type)
@@ -260,13 +275,23 @@ static int h_gpci_event_init(struct perf_event *event)
 	}
 
 	/* check if the request works... */
-	if (single_gpci_request(event_get_request(event),
+	ret = single_gpci_request(event_get_request(event),
 				event_get_starting_index(event),
 				event_get_secondary_index(event),
 				event_get_counter_info_version(event),
 				event_get_offset(event),
 				length,
-				&count)) {
+				&count);
+
+	/*
+	 * ret value as H_AUTHORITY implies that partition is not permitted to retrieve
+	 * performance information, and required to set
+	 * "Enable Performance Information Collection" option.
+	 */
+	if (ret == H_AUTHORITY)
+		return -EPERM;
+
+	if (ret) {
 		pr_devel("gpci hcall failed\n");
 		return -EINVAL;
 	}
-- 
2.43.0

[PATCH 4.19 120/148] powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 20933531be0577cdd782216858c26150dbc7936f ]

Move the prototypes into mpc10x.h which is included by all the relevant
C files, fixes:

  arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure'
  arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send'

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/embedded6xx/linkstation.c | 3 ---
 arch/powerpc/platforms/embedded6xx/mpc10x.h      | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index f514d5d28cd4f..3f3821eb4c36b 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -97,9 +97,6 @@ static void __init linkstation_init_IRQ(void)
 	mpic_init(mpic);
 }
 
-extern void avr_uart_configure(void);
-extern void avr_uart_send(const char);
-
 static void __noreturn linkstation_restart(char *cmd)
 {
 	local_irq_disable();
diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h
index 5ad12023e5628..ebc258fa4858d 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc10x.h
+++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h
@@ -156,4 +156,7 @@ int mpc10x_disable_store_gathering(struct pci_controller *hose);
 /* For MPC107 boards that use the built-in openpic */
 void mpc10x_set_openpic(void);
 
+void avr_uart_configure(void);
+void avr_uart_send(const char c);
+
 #endif	/* __PPC_KERNEL_MPC10X_H */
-- 
2.43.0

[PATCH 4.19 121/148] backlight: lm3630a: Initialize backlight_properties on init

[Sasha Levin]

From: Luca Weiss <luca@z3ntu.xyz>

[ Upstream commit ad9aeb0e3aa90ebdad5fabf9c21783740eb95907 ]

The backlight_properties struct should be initialized to zero before
using, otherwise there will be some random values in the struct.

Fixes: 0c2a665a648e ("backlight: add Backlight driver for lm3630 chip")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-1-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3630a_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index f17e5a8860fa7..70f5ea5f210cc 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -332,6 +332,7 @@ static int lm3630a_backlight_register(struct lm3630a_chip *pchip)
 	struct backlight_properties props;
 	struct lm3630a_platform_data *pdata = pchip->pdata;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) {
 		props.brightness = pdata->leda_init_brt;
-- 
2.43.0

[PATCH 4.19 122/148] backlight: lm3630a: Don't set bl->props.brightness in get_brightness

[Sasha Levin]

From: Luca Weiss <luca@z3ntu.xyz>

[ Upstream commit 4bf7ddd2d2f0f8826f25f74c7eba4e2c323a1446 ]

There's no need to set bl->props.brightness, the get_brightness function
is just supposed to return the current brightness and not touch the
struct.

With that done we can also remove the 'goto out' and just return the
value.

Fixes: 0c2a665a648e ("backlight: add Backlight driver for lm3630 chip")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-2-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3630a_bl.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 70f5ea5f210cc..874040c465f20 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -223,7 +223,7 @@ static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
 		if (rval < 0)
 			goto out_i2c_err;
 		brightness |= rval;
-		goto out;
+		return brightness;
 	}
 
 	/* disable sleep */
@@ -234,11 +234,8 @@ static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
 	rval = lm3630a_read(pchip, REG_BRT_A);
 	if (rval < 0)
 		goto out_i2c_err;
-	brightness = rval;
+	return rval;
 
-out:
-	bl->props.brightness = brightness;
-	return bl->props.brightness;
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access register\n");
 	return 0;
@@ -300,7 +297,7 @@ static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
 		if (rval < 0)
 			goto out_i2c_err;
 		brightness |= rval;
-		goto out;
+		return brightness;
 	}
 
 	/* disable sleep */
@@ -311,11 +308,8 @@ static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
 	rval = lm3630a_read(pchip, REG_BRT_B);
 	if (rval < 0)
 		goto out_i2c_err;
-	brightness = rval;
+	return rval;
 
-out:
-	bl->props.brightness = brightness;
-	return bl->props.brightness;
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access register\n");
 	return 0;
-- 
2.43.0

[PATCH 4.19 123/148] backlight: da9052: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit 0285e9efaee8276305db5c52a59baf84e9731556 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: 6ede3d832aaa ("backlight: add driver for DA9052/53 PMIC v1")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-2-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/da9052_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c
index 49035c12739a1..d48513eb3bc5f 100644
--- a/drivers/video/backlight/da9052_bl.c
+++ b/drivers/video/backlight/da9052_bl.c
@@ -122,6 +122,7 @@ static int da9052_backlight_probe(struct platform_device *pdev)
 	wleds->led_reg = platform_get_device_id(pdev)->driver_data;
 	wleds->state = DA9052_WLEDS_OFF;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	props.max_brightness = DA9052_MAX_BRIGHTNESS;
 
-- 
2.43.0

[PATCH 4.19 124/148] backlight: lm3639: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit abb5a5d951fbea3feb5c4ba179b89bb96a1d3462 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: 0f59858d5119 ("backlight: add new lm3639 backlight driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-3-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3639_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c
index 086611c7bc03c..a1ef6f23156db 100644
--- a/drivers/video/backlight/lm3639_bl.c
+++ b/drivers/video/backlight/lm3639_bl.c
@@ -343,6 +343,7 @@ static int lm3639_probe(struct i2c_client *client,
 	}
 
 	/* backlight */
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	props.brightness = pdata->init_brt_led;
 	props.max_brightness = pdata->max_brt_led;
-- 
2.43.0

[PATCH 4.19 125/148] backlight: lp8788: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit 392346827fbe8a7fd573dfb145170d7949f639a6 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: c5a51053cf3b ("backlight: add new lp8788 backlight driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-4-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lp8788_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c
index cf869ec90cce8..a324423f30474 100644
--- a/drivers/video/backlight/lp8788_bl.c
+++ b/drivers/video/backlight/lp8788_bl.c
@@ -195,6 +195,7 @@ static int lp8788_backlight_register(struct lp8788_bl *bl)
 	int init_brt;
 	char *name;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = MAX_BRIGHTNESS;
 
-- 
2.43.0

[PATCH 4.19 126/148] arch/powerpc: Remove <linux/fb.h> from backlight code

[Sasha Levin]

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 838f865802b9f26135ea7df4e30f89ac2f50c23e ]

Replace <linux/fb.h> with a forward declaration in <asm/backlight.h> to
resolve an unnecessary dependency. Remove pmac_backlight_curve_lookup()
and struct fb_info from source and header files. The function and the
framebuffer struct are unused. No functional changes.

v3:
	* Add Fixes tag (Christophe)
	* fix typos in commit message (Jani)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d565dd3b0824 ("[PATCH] powerpc: More via-pmu backlight fixes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # (powerpc)
Link: https://patchwork.freedesktop.org/patch/msgid/20240306122935.10626-4-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/backlight.h        |  5 ++--
 arch/powerpc/platforms/powermac/backlight.c | 26 ---------------------
 2 files changed, 2 insertions(+), 29 deletions(-)

diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h
index 1b5eab62ed047..061a910d74929 100644
--- a/arch/powerpc/include/asm/backlight.h
+++ b/arch/powerpc/include/asm/backlight.h
@@ -10,15 +10,14 @@
 #define __ASM_POWERPC_BACKLIGHT_H
 #ifdef __KERNEL__
 
-#include <linux/fb.h>
 #include <linux/mutex.h>
 
+struct backlight_device;
+
 /* For locking instructions, see the implementation file */
 extern struct backlight_device *pmac_backlight;
 extern struct mutex pmac_backlight_mutex;
 
-extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
-
 extern int pmac_has_backlight_type(const char *type);
 
 extern void pmac_backlight_key(int direction);
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
index 6b5dcccae1d30..8fae9a7d3d47c 100644
--- a/arch/powerpc/platforms/powermac/backlight.c
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -8,7 +8,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/fb.h>
 #include <linux/backlight.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
@@ -72,31 +71,6 @@ int pmac_has_backlight_type(const char *type)
 	return 0;
 }
 
-int pmac_backlight_curve_lookup(struct fb_info *info, int value)
-{
-	int level = (FB_BACKLIGHT_LEVELS - 1);
-
-	if (info && info->bl_dev) {
-		int i, max = 0;
-
-		/* Look for biggest value */
-		for (i = 0; i < FB_BACKLIGHT_LEVELS; i++)
-			max = max((int)info->bl_curve[i], max);
-
-		/* Look for nearest value */
-		for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) {
-			int diff = abs(info->bl_curve[i] - value);
-			if (diff < max) {
-				max = diff;
-				level = i;
-			}
-		}
-
-	}
-
-	return level;
-}
-
 static void pmac_backlight_key_worker(struct work_struct *work)
 {
 	if (atomic_read(&kernel_backlight_disabled))
-- 
2.43.0

[PATCH 4.19 127/148] sparc32: Fix section mismatch in leon_pci_grpci

[Sasha Levin]

From: Sam Ravnborg <sam@ravnborg.org>

[ Upstream commit 24338a6ae13cb743ced77da1b3a12c83f08a0c96 ]

Passing a datastructre marked _initconst to platform_driver_register()
is wrong. Drop the __initconst notation.

This fixes the following warnings:

WARNING: modpost: vmlinux: section mismatch in reference: grpci1_of_driver+0x30 (section: .data) -> grpci1_of_match (section: .init.rodata)
WARNING: modpost: vmlinux: section mismatch in reference: grpci2_of_driver+0x30 (section: .data) -> grpci2_of_match (section: .init.rodata)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Fixes: 4154bb821f0b ("sparc: leon: grpci1: constify of_device_id")
Fixes: 03949b1cb9f1 ("sparc: leon: grpci2: constify of_device_id")
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-7-1f186603c5c4@ravnborg.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/leon_pci_grpci1.c | 2 +-
 arch/sparc/kernel/leon_pci_grpci2.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/leon_pci_grpci1.c b/arch/sparc/kernel/leon_pci_grpci1.c
index e6935d0ac1ec9..c32590bdd3120 100644
--- a/arch/sparc/kernel/leon_pci_grpci1.c
+++ b/arch/sparc/kernel/leon_pci_grpci1.c
@@ -696,7 +696,7 @@ static int grpci1_of_probe(struct platform_device *ofdev)
 	return err;
 }
 
-static const struct of_device_id grpci1_of_match[] __initconst = {
+static const struct of_device_id grpci1_of_match[] = {
 	{
 	 .name = "GAISLER_PCIFBRG",
 	 },
diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c
index ca22f93d90454..dd06abc61657f 100644
--- a/arch/sparc/kernel/leon_pci_grpci2.c
+++ b/arch/sparc/kernel/leon_pci_grpci2.c
@@ -887,7 +887,7 @@ static int grpci2_of_probe(struct platform_device *ofdev)
 	return err;
 }
 
-static const struct of_device_id grpci2_of_match[] __initconst = {
+static const struct of_device_id grpci2_of_match[] = {
 	{
 	 .name = "GAISLER_GRPCI2",
 	 },
-- 
2.43.0

[PATCH 4.19 128/148] ALSA: usb-audio: Stop parsing channels bits when all channels are found.

[Sasha Levin]

From: Johan Carlsson <johan.carlsson@teenage.engineering>

[ Upstream commit a39d51ff1f52cd0b6fe7d379ac93bd8b4237d1b7 ]

If a usb audio device sets more bits than the amount of channels
it could write outside of the map array.

Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support")
Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/stream.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index 1cfb30465df7d..3f20438a1b56e 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -306,9 +306,12 @@ static struct snd_pcm_chmap_elem *convert_chmap(int channels, unsigned int bits,
 	c = 0;
 
 	if (bits) {
-		for (; bits && *maps; maps++, bits >>= 1)
+		for (; bits && *maps; maps++, bits >>= 1) {
 			if (bits & 1)
 				chmap->map[c++] = *maps;
+			if (c == chmap->channels)
+				break;
+		}
 	} else {
 		/* If we're missing wChannelConfig, then guess something
 		    to make sure the channel map is not skipped entirely */
-- 
2.43.0

[PATCH 4.19 129/148] scsi: csiostor: Avoid function pointer casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9f3dbcb5632d6876226031d552ef6163bb3ad215 ]

csiostor uses function pointer casts to keep the csio_ln_ev state machine
hidden, but this causes warnings about control flow integrity (KCFI)
violations in clang-16 and higher:

drivers/scsi/csiostor/csio_lnode.c:1098:33: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1098 |         return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
      |                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1369:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1369 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1373:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1373 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1377:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1377 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Move the enum into a shared header so the correct types can be used without
the need for casts.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213100518.457623-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/csiostor/csio_defs.h  | 18 ++++++++++++++++--
 drivers/scsi/csiostor/csio_lnode.c |  8 ++++----
 drivers/scsi/csiostor/csio_lnode.h | 13 -------------
 3 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_defs.h b/drivers/scsi/csiostor/csio_defs.h
index c38017b4af982..e50e93e7fe5a1 100644
--- a/drivers/scsi/csiostor/csio_defs.h
+++ b/drivers/scsi/csiostor/csio_defs.h
@@ -73,7 +73,21 @@ csio_list_deleted(struct list_head *list)
 #define csio_list_prev(elem)	(((struct list_head *)(elem))->prev)
 
 /* State machine */
-typedef void (*csio_sm_state_t)(void *, uint32_t);
+struct csio_lnode;
+
+/* State machine evets */
+enum csio_ln_ev {
+	CSIO_LNE_NONE = (uint32_t)0,
+	CSIO_LNE_LINKUP,
+	CSIO_LNE_FAB_INIT_DONE,
+	CSIO_LNE_LINK_DOWN,
+	CSIO_LNE_DOWN_LINK,
+	CSIO_LNE_LOGO,
+	CSIO_LNE_CLOSE,
+	CSIO_LNE_MAX_EVENT,
+};
+
+typedef void (*csio_sm_state_t)(struct csio_lnode *ln, enum csio_ln_ev evt);
 
 struct csio_sm {
 	struct list_head	sm_list;
@@ -83,7 +97,7 @@ struct csio_sm {
 static inline void
 csio_set_state(void *smp, void *state)
 {
-	((struct csio_sm *)smp)->sm_state = (csio_sm_state_t)state;
+	((struct csio_sm *)smp)->sm_state = state;
 }
 
 static inline void
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index 98944fb3f0b85..1c4e1c86c1d2f 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -1095,7 +1095,7 @@ csio_handle_link_down(struct csio_hw *hw, uint8_t portid, uint32_t fcfi,
 int
 csio_is_lnode_ready(struct csio_lnode *ln)
 {
-	return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
+	return (csio_get_state(ln) == csio_lns_ready);
 }
 
 /*****************************************************************************/
@@ -1367,15 +1367,15 @@ csio_free_fcfinfo(struct kref *kref)
 void
 csio_lnode_state_to_str(struct csio_lnode *ln, int8_t *str)
 {
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
+	if (csio_get_state(ln) == csio_lns_uninit) {
 		strcpy(str, "UNINIT");
 		return;
 	}
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
+	if (csio_get_state(ln) == csio_lns_ready) {
 		strcpy(str, "READY");
 		return;
 	}
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
+	if (csio_get_state(ln) == csio_lns_offline) {
 		strcpy(str, "OFFLINE");
 		return;
 	}
diff --git a/drivers/scsi/csiostor/csio_lnode.h b/drivers/scsi/csiostor/csio_lnode.h
index 372a67d122d38..607698a0f0631 100644
--- a/drivers/scsi/csiostor/csio_lnode.h
+++ b/drivers/scsi/csiostor/csio_lnode.h
@@ -53,19 +53,6 @@
 extern int csio_fcoe_rnodes;
 extern int csio_fdmi_enable;
 
-/* State machine evets */
-enum csio_ln_ev {
-	CSIO_LNE_NONE = (uint32_t)0,
-	CSIO_LNE_LINKUP,
-	CSIO_LNE_FAB_INIT_DONE,
-	CSIO_LNE_LINK_DOWN,
-	CSIO_LNE_DOWN_LINK,
-	CSIO_LNE_LOGO,
-	CSIO_LNE_CLOSE,
-	CSIO_LNE_MAX_EVENT,
-};
-
-
 struct csio_fcf_info {
 	struct list_head	list;
 	uint8_t			priority;
-- 
2.43.0

[PATCH 4.19 130/148] scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit b69600231f751304db914c63b937f7098ed2895c ]

Some callback functions used here take a boolean argument, others take a
status argument. This breaks KCFI type checking, so clang now warns about
the function pointer cast:

drivers/scsi/bfa/bfad_bsg.c:2138:29: error: cast from 'void (*)(void *, enum bfa_status)' to 'bfa_cb_cbfn_t' (aka 'void (*)(void *, enum bfa_boolean)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Assuming the code is actually correct here and the callers always match the
argument types of the callee, rework this to replace the explicit cast with
a union of the two pointer types. This does not change the behavior of the
code, so if something is actually broken here, a larger rework may be
necessary.

Fixes: 37ea0558b87a ("[SCSI] bfa: Added support to collect and reset fcport stats")
Fixes: 3ec4f2c8bff2 ("[SCSI] bfa: Added support to configure QOS and collect stats.")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240222124433.2046570-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bfa/bfa.h      |  9 ++++++++-
 drivers/scsi/bfa/bfa_core.c |  4 +---
 drivers/scsi/bfa/bfa_ioc.h  |  8 ++++++--
 drivers/scsi/bfa/bfad_bsg.c | 11 ++++-------
 4 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/bfa/bfa.h b/drivers/scsi/bfa/bfa.h
index 0e119d838e1b6..f312c356ffc4b 100644
--- a/drivers/scsi/bfa/bfa.h
+++ b/drivers/scsi/bfa/bfa.h
@@ -28,7 +28,6 @@
 struct bfa_s;
 
 typedef void (*bfa_isr_func_t) (struct bfa_s *bfa, struct bfi_msg_s *m);
-typedef void (*bfa_cb_cbfn_status_t) (void *cbarg, bfa_status_t status);
 
 /*
  * Interrupt message handlers
@@ -446,4 +445,12 @@ struct bfa_cb_pending_q_s {
 	(__qe)->data = (__data);				\
 } while (0)
 
+#define bfa_pending_q_init_status(__qe, __cbfn, __cbarg, __data) do {	\
+	bfa_q_qe_init(&((__qe)->hcb_qe.qe));			\
+	(__qe)->hcb_qe.cbfn_status = (__cbfn);			\
+	(__qe)->hcb_qe.cbarg = (__cbarg);			\
+	(__qe)->hcb_qe.pre_rmv = BFA_TRUE;			\
+	(__qe)->data = (__data);				\
+} while (0)
+
 #endif /* __BFA_H__ */
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 10a63be925441..ada30a5cacc85 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -1915,15 +1915,13 @@ bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q)
 	struct list_head		*qe;
 	struct list_head		*qen;
 	struct bfa_cb_qe_s	*hcb_qe;
-	bfa_cb_cbfn_status_t	cbfn;
 
 	list_for_each_safe(qe, qen, comp_q) {
 		hcb_qe = (struct bfa_cb_qe_s *) qe;
 		if (hcb_qe->pre_rmv) {
 			/* qe is invalid after return, dequeue before cbfn() */
 			list_del(qe);
-			cbfn = (bfa_cb_cbfn_status_t)(hcb_qe->cbfn);
-			cbfn(hcb_qe->cbarg, hcb_qe->fw_status);
+			hcb_qe->cbfn_status(hcb_qe->cbarg, hcb_qe->fw_status);
 		} else
 			hcb_qe->cbfn(hcb_qe->cbarg, BFA_TRUE);
 	}
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index 0f9fab770339a..179dd0416979d 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -369,14 +369,18 @@ struct bfa_reqq_wait_s {
 	void	*cbarg;
 };
 
-typedef void	(*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+typedef void (*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+typedef void (*bfa_cb_cbfn_status_t) (void *cbarg, bfa_status_t status);
 
 /*
  * Generic BFA callback element.
  */
 struct bfa_cb_qe_s {
 	struct list_head	qe;
-	bfa_cb_cbfn_t	cbfn;
+	union {
+		bfa_cb_cbfn_status_t	cbfn_status;
+		bfa_cb_cbfn_t		cbfn;
+	};
 	bfa_boolean_t	once;
 	bfa_boolean_t	pre_rmv;	/* set for stack based qe(s) */
 	bfa_status_t	fw_status;	/* to access fw status in comp proc */
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index 5d163ca1b3666..6735f61df191a 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -2143,8 +2143,7 @@ bfad_iocmd_fcport_get_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_cb_pending_q_s cb_qe;
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, &iocmd->stats);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, &iocmd->stats);
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_fcport_get_stats(&bfad->bfa, &cb_qe);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -2167,7 +2166,7 @@ bfad_iocmd_fcport_reset_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_cb_pending_q_s cb_qe;
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp, &fcomp, NULL);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, NULL);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_fcport_clear_stats(&bfad->bfa, &cb_qe);
@@ -2451,8 +2450,7 @@ bfad_iocmd_qos_get_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(&bfad->bfa);
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, &iocmd->stats);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, &iocmd->stats);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	WARN_ON(!bfa_ioc_get_fcmode(&bfad->bfa.ioc));
@@ -2482,8 +2480,7 @@ bfad_iocmd_qos_reset_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(&bfad->bfa);
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, NULL);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, NULL);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	WARN_ON(!bfa_ioc_get_fcmode(&bfad->bfa.ioc));
-- 
2.43.0

[PATCH 4.19 131/148] net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit d6f4de70f73a106986ee315d7d512539f2f3303a ]

The intent is to check if the strings' are truncated or not. So, >= should
be used instead of >, because strlcat() and snprintf() return the length of
the output, excluding the trailing NULL.

Fixes: a02d69261134 ("SUNRPC: Provide functions for managing universal addresses")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/addr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c
index 7404f02702a1c..eba3b6f4d4ace 100644
--- a/net/sunrpc/addr.c
+++ b/net/sunrpc/addr.c
@@ -287,10 +287,10 @@ char *rpc_sockaddr2uaddr(const struct sockaddr *sap, gfp_t gfp_flags)
 	}
 
 	if (snprintf(portbuf, sizeof(portbuf),
-		     ".%u.%u", port >> 8, port & 0xff) > (int)sizeof(portbuf))
+		     ".%u.%u", port >> 8, port & 0xff) >= (int)sizeof(portbuf))
 		return NULL;
 
-	if (strlcat(addrbuf, portbuf, sizeof(addrbuf)) > sizeof(addrbuf))
+	if (strlcat(addrbuf, portbuf, sizeof(addrbuf)) >= sizeof(addrbuf))
 		return NULL;
 
 	return kstrdup(addrbuf, gfp_flags);
-- 
2.43.0

[PATCH 4.19 132/148] NFS: Fix an off by one in root_nfs_cat()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 698ad1a538da0b6bf969cfee630b4e3a026afb87 ]

The intent is to check if 'dest' is truncated or not. So, >= should be
used instead of >, because strlcat() returns the length of 'dest' and 'src'
excluding the trailing NULL.

Fixes: 56463e50d1fc ("NFS: Use super.c for NFSROOT mount option parsing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfsroot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index effaa4247b912..c0f2e1751c33e 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -169,10 +169,10 @@ static int __init root_nfs_cat(char *dest, const char *src,
 	size_t len = strlen(dest);
 
 	if (len && dest[len - 1] != ',')
-		if (strlcat(dest, ",", destlen) > destlen)
+		if (strlcat(dest, ",", destlen) >= destlen)
 			return -1;
 
-	if (strlcat(dest, src, destlen) > destlen)
+	if (strlcat(dest, src, destlen) >= destlen)
 		return -1;
 	return 0;
 }
-- 
2.43.0

[PATCH 4.19 133/148] clk: qcom: gdsc: Add support to update GDSC transition delay

[Sasha Levin]

From: Taniya Das <tdas@codeaurora.org>

[ Upstream commit 4e7c4d3652f96f41179aab3ff53025c7a550d689 ]

GDSCs have multiple transition delays which are used for the GDSC FSM
states. Older targets/designs required these values to be updated from
gdsc code to certain default values for the FSM state to work as
expected. But on the newer targets/designs the values updated from the
GDSC driver can hamper the FSM state to not work as expected.

On SC7180 we observe black screens because the gdsc is being
enabled/disabled very rapidly and the GDSC FSM state does not work as
expected. This is due to the fact that the GDSC reset value is being
updated from SW.

Thus add support to update the transition delay from the clock
controller gdscs as required.

Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs)
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 117e7dc697c2 ("clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gdsc.c | 26 +++++++++++++++++++++-----
 drivers/clk/qcom/gdsc.h |  8 +++++++-
 2 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index a077133c7ce38..83541e9d50701 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015, 2017-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2017-2018, 2022, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -39,9 +39,14 @@
 #define CFG_GDSCR_OFFSET		0x4
 
 /* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */
-#define EN_REST_WAIT_VAL	(0x2 << 20)
-#define EN_FEW_WAIT_VAL		(0x8 << 16)
-#define CLK_DIS_WAIT_VAL	(0x2 << 12)
+#define EN_REST_WAIT_VAL	0x2
+#define EN_FEW_WAIT_VAL		0x8
+#define CLK_DIS_WAIT_VAL	0x2
+
+/* Transition delay shifts */
+#define EN_REST_WAIT_SHIFT	20
+#define EN_FEW_WAIT_SHIFT	16
+#define CLK_DIS_WAIT_SHIFT	12
 
 #define RETAIN_MEM		BIT(14)
 #define RETAIN_PERIPH		BIT(13)
@@ -314,7 +319,18 @@ static int gdsc_init(struct gdsc *sc)
 	 */
 	mask = HW_CONTROL_MASK | SW_OVERRIDE_MASK |
 	       EN_REST_WAIT_MASK | EN_FEW_WAIT_MASK | CLK_DIS_WAIT_MASK;
-	val = EN_REST_WAIT_VAL | EN_FEW_WAIT_VAL | CLK_DIS_WAIT_VAL;
+
+	if (!sc->en_rest_wait_val)
+		sc->en_rest_wait_val = EN_REST_WAIT_VAL;
+	if (!sc->en_few_wait_val)
+		sc->en_few_wait_val = EN_FEW_WAIT_VAL;
+	if (!sc->clk_dis_wait_val)
+		sc->clk_dis_wait_val = CLK_DIS_WAIT_VAL;
+
+	val = sc->en_rest_wait_val << EN_REST_WAIT_SHIFT |
+		sc->en_few_wait_val << EN_FEW_WAIT_SHIFT |
+		sc->clk_dis_wait_val << CLK_DIS_WAIT_SHIFT;
+
 	ret = regmap_update_bits(sc->regmap, sc->gdscr, mask, val);
 	if (ret)
 		return ret;
diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
index bd1f2c780d0af..a31d3dc36f2f2 100644
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015, 2017-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2017-2018, 2022, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -29,6 +29,9 @@ struct reset_controller_dev;
  * @cxcs: offsets of branch registers to toggle mem/periph bits in
  * @cxc_count: number of @cxcs
  * @pwrsts: Possible powerdomain power states
+ * @en_rest_wait_val: transition delay value for receiving enr ack signal
+ * @en_few_wait_val: transition delay value for receiving enf ack signal
+ * @clk_dis_wait_val: transition delay value for halting clock
  * @resets: ids of resets associated with this gdsc
  * @reset_count: number of @resets
  * @rcdev: reset controller
@@ -42,6 +45,9 @@ struct gdsc {
 	unsigned int			clamp_io_ctrl;
 	unsigned int			*cxcs;
 	unsigned int			cxc_count;
+	unsigned int			en_rest_wait_val;
+	unsigned int			en_few_wait_val;
+	unsigned int			clk_dis_wait_val;
 	const u8			pwrsts;
 /* Powerdomain allowable state bitfields */
 #define PWRSTS_OFF		BIT(0)
-- 
2.43.0

[PATCH 4.19 134/148] usb: phy: generic: Get the vbus supply

[Sasha Levin]

From: Sean Anderson <sean.anderson@seco.com>

[ Upstream commit 03e607cbb2931374db1825f371e9c7f28526d3f4 ]

While support for working with a vbus was added, the regulator was never
actually gotten (despite what was documented). Fix this by actually
getting the supply from the device tree.

Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220425171412.1188485-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/phy/phy-generic.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index a53b89be53248..8a04b157f19f3 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -283,6 +283,13 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 			return -EPROBE_DEFER;
 	}
 
+	nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
+	if (PTR_ERR(nop->vbus_draw) == -ENODEV)
+		nop->vbus_draw = NULL;
+	if (IS_ERR(nop->vbus_draw))
+		return dev_err_probe(dev, PTR_ERR(nop->vbus_draw),
+				     "could not get vbus regulator\n");
+
 	nop->dev		= dev;
 	nop->phy.dev		= nop->dev;
 	nop->phy.label		= "nop-xceiv";
-- 
2.43.0

[PATCH 4.19 135/148] serial: max310x: fix syntax error in IRQ error message

[Sasha Levin]

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

[ Upstream commit 8ede8c6f474255b2213cccd7997b993272a8e2f9 ]

Replace g with q.

Helpful when grepping thru source code or logs for
"request" keyword.

Fixes: f65444187a66 ("serial: New serial driver MAX310X")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/max310x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index e68dbd13110ba..1c8fd06befec4 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1363,7 +1363,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
 	if (!ret)
 		return 0;
 
-	dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+	dev_err(dev, "Unable to request IRQ %i\n", irq);
 
 out_uart:
 	for (i = 0; i < devtype->nr; i++) {
-- 
2.43.0

[PATCH 4.19 136/148] tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT

[Sasha Levin]

From: Tudor Ambarus <tudor.ambarus@linaro.org>

[ Upstream commit 314c2b399288f0058a8c5b6683292cbde5f1531b ]

The core expects for tx_empty() either TIOCSER_TEMT when the tx is
empty or 0 otherwise. s3c24xx_serial_txempty_nofifo() might return
0x4, and at least uart_get_lsr_info() tries to clear exactly
TIOCSER_TEMT (BIT(1)). Fix tx_empty() to return TIOCSER_TEMT.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-2-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/samsung.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 5f1f52cc63951..c76bf1c11e6fd 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -800,11 +800,10 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 		if ((ufstat & info->tx_fifomask) != 0 ||
 		    (ufstat & info->tx_fifofull))
 			return 0;
-
-		return 1;
+		return TIOCSER_TEMT;
 	}
 
-	return s3c24xx_serial_txempty_nofifo(port);
+	return s3c24xx_serial_txempty_nofifo(port) ? TIOCSER_TEMT : 0;
 }
 
 /* no modem control lines */
-- 
2.43.0

[PATCH 4.19 137/148] kconfig: fix infinite loop when expanding a macro at the end of file

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit af8bbce92044dc58e4cc039ab94ee5d470a621f5 ]

A macro placed at the end of a file with no newline causes an infinite
loop.

[Test Kconfig]
  $(info,hello)
  \ No newline at end of file

I realized that flex-provided input() returns 0 instead of EOF when it
reaches the end of a file.

Fixes: 104daea149c4 ("kconfig: reference environment variables directly and remove 'option env='")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/zconf.l | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index c2f577d719647..2a47ce9b219a0 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -292,8 +292,11 @@ static char *expand_token(const char *in, size_t n)
 	new_string();
 	append_string(in, n);
 
-	/* get the whole line because we do not know the end of token. */
-	while ((c = input()) != EOF) {
+	/*
+	 * get the whole line because we do not know the end of token.
+	 * input() returns 0 (not EOF!) when it reachs the end of file.
+	 */
+	while ((c = input()) != 0) {
 		if (c == '\n') {
 			unput(c);
 			break;
-- 
2.43.0

[PATCH 4.19 138/148] rtc: mt6397: select IRQ_DOMAIN instead of depending on it

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 544c42f798e1651dcb04fb0395219bf0f1c2607e ]

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on" for IRQ_DOMAIN to
"select" for RTC_DRV_MT6397.

Fixes: 04d3ba70a3c9 ("rtc: mt6397: add IRQ domain dependency")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Huang <eddie.huang@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240213050258.6167-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index b5845f16a3a26..199cc39459198 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1719,7 +1719,8 @@ config RTC_DRV_MOXART
 
 config RTC_DRV_MT6397
 	tristate "MediaTek PMIC based RTC"
-	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
+	depends on MFD_MT6397 || COMPILE_TEST
+	select IRQ_DOMAIN
 	help
 	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
 	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
-- 
2.43.0

[PATCH 4.19 138/148] rtc: mt6397: select IRQ_DOMAIN instead of depending on it

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 544c42f798e1651dcb04fb0395219bf0f1c2607e ]

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on" for IRQ_DOMAIN to
"select" for RTC_DRV_MT6397.

Fixes: 04d3ba70a3c9 ("rtc: mt6397: add IRQ domain dependency")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Huang <eddie.huang@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240213050258.6167-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index b5845f16a3a26..199cc39459198 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1719,7 +1719,8 @@ config RTC_DRV_MOXART
 
 config RTC_DRV_MT6397
 	tristate "MediaTek PMIC based RTC"
-	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
+	depends on MFD_MT6397 || COMPILE_TEST
+	select IRQ_DOMAIN
 	help
 	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
 	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4.19 139/148] serial: 8250_exar: Don't remove GPIO device on suspend

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 73b5a5c00be39e23b194bad10e1ea8bb73eee176 ]

It seems a copy&paste mistake that suspend callback removes the GPIO
device. There is no counterpart of this action, means once suspended
there is no more GPIO device available untile full unbind-bind cycle
is performed. Remove suspicious GPIO device removal in suspend.

Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_exar.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 195f58c5b477f..319737919381d 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -553,6 +553,7 @@ static void exar_pci_remove(struct pci_dev *pcidev)
 	for (i = 0; i < priv->nr; i++)
 		serial8250_unregister_port(priv->line[i]);
 
+	/* Ensure that every init quirk is properly torn down */
 	if (priv->board->exit)
 		priv->board->exit(pcidev);
 }
@@ -567,10 +568,6 @@ static int __maybe_unused exar_suspend(struct device *dev)
 		if (priv->line[i] >= 0)
 			serial8250_suspend_port(priv->line[i]);
 
-	/* Ensure that every init quirk is properly torn down */
-	if (priv->board->exit)
-		priv->board->exit(pcidev);
-
 	return 0;
 }
 
-- 
2.43.0

[PATCH 4.19 140/148] staging: greybus: fix get_channel_from_mode() failure path

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 34164202a5827f60a203ca9acaf2d9f7d432aac8 ]

The get_channel_from_mode() function is supposed to return the channel
which matches the mode.  But it has a bug where if it doesn't find a
matching channel then it returns the last channel.  It should return
NULL instead.

Also remove an unnecessary NULL check on "channel".

Fixes: 2870b52bae4c ("greybus: lights: add lights implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/379c0cb4-39e0-4293-8a18-c7b1298e5420@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/light.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/greybus/light.c b/drivers/staging/greybus/light.c
index db06cd544af58..8c5819d1e1abe 100644
--- a/drivers/staging/greybus/light.c
+++ b/drivers/staging/greybus/light.c
@@ -102,15 +102,15 @@ static struct led_classdev *get_channel_cdev(struct gb_channel *channel)
 static struct gb_channel *get_channel_from_mode(struct gb_light *light,
 						u32 mode)
 {
-	struct gb_channel *channel = NULL;
+	struct gb_channel *channel;
 	int i;
 
 	for (i = 0; i < light->channels_count; i++) {
 		channel = &light->channels[i];
-		if (channel && channel->mode == mode)
-			break;
+		if (channel->mode == mode)
+			return channel;
 	}
-	return channel;
+	return NULL;
 }
 
 static int __gb_lights_flash_intensity_set(struct gb_channel *channel,
-- 
2.43.0

[PATCH 4.19 141/148] usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin

[Sasha Levin]

From: Colin Ian King <colin.i.king@gmail.com>

[ Upstream commit 600556809f04eb3bbccd05218215dcd7b285a9a9 ]

Currently the variable irqflags is being set but is not being used,
it appears it should be used in the call to net2272_probe_fin
rather than IRQF_TRIGGER_LOW being used. Kudos to Uwe Kleine-König
for suggesting the fix.

Cleans up clang scan build warning:
drivers/usb/gadget/udc/net2272.c:2610:15: warning: variable 'irqflags'
set but not used [-Wunused-but-set-variable]

Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240307181734.2034407-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/net2272.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 077fa9304618d..2004442d791cf 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -2638,7 +2638,7 @@ net2272_plat_probe(struct platform_device *pdev)
 		goto err_req;
 	}
 
-	ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW);
+	ret = net2272_probe_fin(dev, irqflags);
 	if (ret)
 		goto err_io;
 
-- 
2.43.0

[PATCH 4.19 142/148] net: hsr: fix placement of logical operator in a multi-line statement

[Sasha Levin]

From: Murali Karicheri <m-karicheri2@ti.com>

[ Upstream commit 059477830022e1886f55a9641702461c249fa864 ]

In a multi-line statement exceeding 80 characters, logical operator
should be at the end of a line instead of being at the start. This
is seen when ran checkpatch.pl -f on files under net/hsr. The change
is per suggestion from checkpatch.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ddbec99f5857 ("hsr: Fix uninit-value access in hsr_get_node()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_forward.c  | 8 ++++----
 net/hsr/hsr_framereg.c | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c
index adfb497606785..886fad5922b3c 100644
--- a/net/hsr/hsr_forward.c
+++ b/net/hsr/hsr_forward.c
@@ -63,8 +63,8 @@ static bool is_supervision_frame(struct hsr_priv *hsr, struct sk_buff *skb)
 		return false;
 
 	/* Correct ether type?. */
-	if (!(ethHdr->h_proto == htons(ETH_P_PRP)
-			|| ethHdr->h_proto == htons(ETH_P_HSR)))
+	if (!(ethHdr->h_proto == htons(ETH_P_PRP) ||
+	      ethHdr->h_proto == htons(ETH_P_HSR)))
 		return false;
 
 	/* Get the supervision header from correct location. */
@@ -336,8 +336,8 @@ static int hsr_fill_frame_info(struct hsr_frame_info *frame,
 		/* FIXME: */
 		WARN_ONCE(1, "HSR: VLAN not yet supported");
 	}
-	if (ethhdr->h_proto == htons(ETH_P_PRP)
-			|| ethhdr->h_proto == htons(ETH_P_HSR)) {
+	if (ethhdr->h_proto == htons(ETH_P_PRP) ||
+	    ethhdr->h_proto == htons(ETH_P_HSR)) {
 		frame->skb_std = NULL;
 		frame->skb_hsr = skb;
 		frame->sequence_nr = hsr_get_skb_sequence_nr(skb);
diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c
index 37795502bb511..9c5a423f0f7a3 100644
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -192,8 +192,8 @@ struct hsr_node *hsr_get_node(struct hsr_port *port, struct sk_buff *skb,
 
 	/* Everyone may create a node entry, connected node to a HSR device. */
 
-	if (ethhdr->h_proto == htons(ETH_P_PRP)
-			|| ethhdr->h_proto == htons(ETH_P_HSR)) {
+	if (ethhdr->h_proto == htons(ETH_P_PRP) ||
+	    ethhdr->h_proto == htons(ETH_P_HSR)) {
 		/* Use the existing sequence_nr from the tag as starting point
 		 * for filtering duplicate frames.
 		 */
-- 
2.43.0

[PATCH 4.19 143/148] hsr: Fix uninit-value access in hsr_get_node()

[Sasha Levin]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit ddbec99f58571301679addbc022256970ca3eac6 ]

KMSAN reported the following uninit-value access issue [1]:

=====================================================
BUG: KMSAN: uninit-value in hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
 hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
 fill_frame_info net/hsr/hsr_forward.c:577 [inline]
 hsr_forward_skb+0xe12/0x30e0 net/hsr/hsr_forward.c:615
 hsr_dev_xmit+0x1a1/0x270 net/hsr/hsr_device.c:223
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
 dev_queue_xmit include/linux/netdevice.h:3134 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3087 [inline]
 packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
 __alloc_skb+0x318/0x740 net/core/skbuff.c:651
 alloc_skb include/linux/skbuff.h:1286 [inline]
 alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
 packet_alloc_skb net/packet/af_packet.c:2936 [inline]
 packet_snd net/packet/af_packet.c:3030 [inline]
 packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 1 PID: 5033 Comm: syz-executor334 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================

If the packet type ID field in the Ethernet header is either ETH_P_PRP or
ETH_P_HSR, but it is not followed by an HSR tag, hsr_get_skb_sequence_nr()
reads an invalid value as a sequence number. This causes the above issue.

This patch fixes the issue by returning NULL if the Ethernet header is not
followed by an HSR tag.

Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Reported-and-tested-by: syzbot+2ef3a8ce8e91b5a50098@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2ef3a8ce8e91b5a50098 [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240312152719.724530-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_framereg.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c
index 9c5a423f0f7a3..e1ef9799762c9 100644
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -194,6 +194,10 @@ struct hsr_node *hsr_get_node(struct hsr_port *port, struct sk_buff *skb,
 
 	if (ethhdr->h_proto == htons(ETH_P_PRP) ||
 	    ethhdr->h_proto == htons(ETH_P_HSR)) {
+		/* Check if skb contains hsr_ethhdr */
+		if (skb->mac_len < sizeof(struct hsr_ethhdr))
+			return NULL;
+
 		/* Use the existing sequence_nr from the tag as starting point
 		 * for filtering duplicate frames.
 		 */
-- 
2.43.0

[PATCH 4.19 144/148] rds: introduce acquire/release ordering in acquire/release_in_xmit()

[Sasha Levin]

From: Yewon Choi <woni9911@gmail.com>

[ Upstream commit 1422f28826d2a0c11e5240b3e951c9e214d8656e ]

acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).

Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.

Fixes: 0f4b1c7e89e6 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eacfd ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/send.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/net/rds/send.c b/net/rds/send.c
index c856e6c963af9..dcb338339b717 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -103,13 +103,12 @@ EXPORT_SYMBOL_GPL(rds_send_path_reset);
 
 static int acquire_in_xmit(struct rds_conn_path *cp)
 {
-	return test_and_set_bit(RDS_IN_XMIT, &cp->cp_flags) == 0;
+	return test_and_set_bit_lock(RDS_IN_XMIT, &cp->cp_flags) == 0;
 }
 
 static void release_in_xmit(struct rds_conn_path *cp)
 {
-	clear_bit(RDS_IN_XMIT, &cp->cp_flags);
-	smp_mb__after_atomic();
+	clear_bit_unlock(RDS_IN_XMIT, &cp->cp_flags);
 	/*
 	 * We don't use wait_on_bit()/wake_up_bit() because our waking is in a
 	 * hot path and finding waiters is very rare.  We don't want to walk
-- 
2.43.0

[PATCH 4.19 145/148] hsr: Handle failures in module init

[Sasha Levin]

From: Felix Maurer <fmaurer@redhat.com>

[ Upstream commit 3cf28cd492308e5f63ed00b29ea03ca016264376 ]

A failure during registration of the netdev notifier was not handled at
all. A failure during netlink initialization did not unregister the netdev
notifier.

Handle failures of netdev notifier registration and netlink initialization.
Both functions should only return negative values on failure and thereby
lead to the hsr module not being loaded.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/3ce097c15e3f7ace98fc7fd9bcbf299f092e63d1.1710504184.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_main.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/net/hsr/hsr_main.c b/net/hsr/hsr_main.c
index cd37d0011b424..c22013ff44795 100644
--- a/net/hsr/hsr_main.c
+++ b/net/hsr/hsr_main.c
@@ -115,14 +115,21 @@ static struct notifier_block hsr_nb = {
 
 static int __init hsr_init(void)
 {
-	int res;
+	int err;
 
 	BUILD_BUG_ON(sizeof(struct hsr_tag) != HSR_HLEN);
 
-	register_netdevice_notifier(&hsr_nb);
-	res = hsr_netlink_init();
+	err = register_netdevice_notifier(&hsr_nb);
+	if (err)
+		return err;
+
+	err = hsr_netlink_init();
+	if (err) {
+		unregister_netdevice_notifier(&hsr_nb);
+		return err;
+	}
 
-	return res;
+	return 0;
 }
 
 static void __exit hsr_exit(void)
-- 
2.43.0

[PATCH 4.19 146/148] net/bnx2x: Prevent access to a freed page in page_pool

[Sasha Levin]

From: Thinh Tran <thinhtr@linux.ibm.com>

[ Upstream commit d27e2da94a42655861ca4baea30c8cd65546f25d ]

Fix race condition leading to system crash during EEH error handling

During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()

799  static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800				struct bnx2x_fastpath *fp, u16 index)
801  {
802	struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803     struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.

    EEH: Beginning: 'slot_reset'
    PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
    bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
    bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
    bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
    Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
    BUG: Kernel NULL pointer dereference on read at 0x00000000
    Faulting instruction address: 0xc0080000025065fc
    Oops: Kernel access of bad area, sig: 11 [#1]
    .....
    Call Trace:
    [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
    [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
    [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
    [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
    [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
    [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
    [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64

To solve this issue, we need to verify page pool allocations before
freeing.

Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index df5e8c2e8eafe..844195849ae76 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1008,9 +1008,6 @@ static inline void bnx2x_set_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid,
 static inline void bnx2x_free_rx_mem_pool(struct bnx2x *bp,
 					  struct bnx2x_alloc_pool *pool)
 {
-	if (!pool->page)
-		return;
-
 	put_page(pool->page);
 
 	pool->page = NULL;
@@ -1021,6 +1018,9 @@ static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp,
 {
 	int i;
 
+	if (!fp->page_pool.page)
+		return;
+
 	if (fp->mode == TPA_MODE_DISABLED)
 		return;
 
-- 
2.43.0

[PATCH 4.19 147/148] spi: spi-mt65xx: Fix NULL pointer access in interrupt handler

[Sasha Levin]

From: Fei Shao <fshao@chromium.org>

[ Upstream commit a20ad45008a7c82f1184dc6dee280096009ece55 ]

The TX buffer in spi_transfer can be a NULL pointer, so the interrupt
handler may end up writing to the invalid memory and cause crashes.

Add a check to trans->tx_buf before using it.

Fixes: 1ce24864bff4 ("spi: mediatek: Only do dma for 4-byte aligned buffers")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240321070942.1587146-2-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mt65xx.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index faca2ab758992..89ec119215371 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -524,17 +524,19 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 		mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
 		mtk_spi_setup_packet(master);
 
-		cnt = mdata->xfer_len / 4;
-		iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
-				trans->tx_buf + mdata->num_xfered, cnt);
+		if (trans->tx_buf) {
+			cnt = mdata->xfer_len / 4;
+			iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
+					trans->tx_buf + mdata->num_xfered, cnt);
 
-		remainder = mdata->xfer_len % 4;
-		if (remainder > 0) {
-			reg_val = 0;
-			memcpy(&reg_val,
-				trans->tx_buf + (cnt * 4) + mdata->num_xfered,
-				remainder);
-			writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+			remainder = mdata->xfer_len % 4;
+			if (remainder > 0) {
+				reg_val = 0;
+				memcpy(&reg_val,
+					trans->tx_buf + (cnt * 4) + mdata->num_xfered,
+					remainder);
+				writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+			}
 		}
 
 		mtk_spi_enable_transfer(master);
-- 
2.43.0

[PATCH 4.19 148/148] Linux 4.19.311-rc1

[Sasha Levin]

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 96be210bd42b9..ee1f1c3c00e4c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 310
-EXTRAVERSION =
+SUBLEVEL = 311
+EXTRAVERSION = -rc1
 NAME = "People's Front"
 
 # *DOCUMENTATION*
-- 
2.43.0

Re: [PATCH 4.19 000/148] 4.19.311-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1280 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.311 release.
> There are 148 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

This fails to build:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/1225692746

  CC      drivers/usb/storage/usual-tables.o
2820drivers/usb/phy/phy-generic.c: In function 'usb_phy_gen_create_phy':
2821drivers/usb/phy/phy-generic.c:286:19: error: implicit declaration of function 'devm_regulator_get_exclusive'; did you mean 'regulator_get_exclusive'? [-Werror=implicit-function-declaration]
2822  nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
2823                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
2824                   regulator_get_exclusive
2825drivers/usb/phy/phy-generic.c:286:17: warning: assignment to 'struct regulator *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
2826  nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
2827                 ^
2828

Best regards,
								Pavel

-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 134/148] usb: phy: generic: Get the vbus supply

[Sean Anderson]

On 3/24/24 19:49, Sasha Levin wrote:
> From: Sean Anderson <sean.anderson@seco.com>
>
> [ Upstream commit 03e607cbb2931374db1825f371e9c7f28526d3f4 ]
>
> While support for working with a vbus was added, the regulator was never
> actually gotten (despite what was documented). Fix this by actually
> getting the supply from the device tree.
>
> Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support")
> Cc: stable <stable@kernel.org>
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> Link: https://cas5-0-urlprotect.trendmicro.com:443/wis/clicktime/v1/query?url=https%3a%2f%2flore.kernel.org%2fr%2f20220425171412.1188485%2d3%2dsean.anderson%40seco.com&umid=d6ce00f6-eb02-4c45-a2bb-d42fb98e3d79&auth=d807158c60b7d2502abde8a2fc01f40662980862-664a4cc6c56716c0ff040724728033a1bce87ec7
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/usb/phy/phy-generic.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
> index a53b89be53248..8a04b157f19f3 100644
> --- a/drivers/usb/phy/phy-generic.c
> +++ b/drivers/usb/phy/phy-generic.c
> @@ -283,6 +283,13 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
>                       return -EPROBE_DEFER;
>       }
>
> +     nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
> +     if (PTR_ERR(nop->vbus_draw) == -ENODEV)
> +             nop->vbus_draw = NULL;
> +     if (IS_ERR(nop->vbus_draw))
> +             return dev_err_probe(dev, PTR_ERR(nop->vbus_draw),
> +                                  "could not get vbus regulator\n");
> +
>       nop->dev                = dev;
>       nop->phy.dev            = nop->dev;
>       nop->phy.label          = "nop-xceiv";

TBH I would rather not backport this if possible. This will increase the
chance of someone using this behavior which is going to change in
562898808cb1 ("usb: phy: generic: Implement otg->set_vbus").

--Sean

[Embedded World 2024, SECO SpA]<https://www.messe-ticket.de/Nuernberg/embeddedworld2024/Register/ew24517689>

Re: [PATCH 4.19 035/148] wifi: mwifiex: debugfs: Drop unnecessary error check for debugfs_create_dir()

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1272 bytes --]

Hi!

> From: Jinjie Ruan <ruanjinjie@huawei.com>
> 
> [ Upstream commit 50180c7f8e3de7c2d87f619131776598fcb1478d ]
> 
> debugfs_create_dir() returns ERR_PTR and never return NULL.
> 
> As Russell suggested, this patch removes the error checking for
> debugfs_create_dir(). This is because the DebugFS kernel API is developed
> in a way that the caller can safely ignore the errors that occur during
> the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in
> start_creating() which can handle it gracefully. So these checks are
> unnecessary.

Additional error handling does not break anything.

This does not fix a bug, and thus does not belong into stable.

Best regards,
								Pavel
								
> +++ b/drivers/net/wireless/marvell/mwifiex/debugfs.c
> @@ -977,9 +977,6 @@ mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
>  	priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name,
>  					       mwifiex_dfs_dir);
>  
> -	if (!priv->dfs_dev_dir)
> -		return;
> -
>  	MWIFIEX_DFS_ADD_FILE(info);
>  	MWIFIEX_DFS_ADD_FILE(debug);
>  	MWIFIEX_DFS_ADD_FILE(getlog);

-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]