From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: sre@kernel.org, robh+dt@kernel.org, broonie@kernel.org,
lgirdwood@gmail.com, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RESEND PATCH v10 10/11] power: supply: Fix Kconfig help text indentiation
Date: Wed, 29 Apr 2020 10:05:54 +0300 [thread overview]
Message-ID: <23314fb63b66f5f4816e052f0d7ff0e7927c0e78.1586925868.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1586925868.git.matti.vaittinen@fi.rohmeurope.com>
Indent the help text as explained in
Documentation/process/coding-style.rst
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
No changes since v9
I just learned the help text in Kconfigs should be indented by two
spaces. I fixed this for BD99954 as suggested by Randy and decided
that I could do this for few other entries as well while I was at
it anyways.
drivers/power/supply/Kconfig | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 436680ee8523..ec028e47c3c2 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -415,7 +415,7 @@ config CHARGER_PCF50633
tristate "NXP PCF50633 MBC"
depends on MFD_PCF50633
help
- Say Y to include support for NXP PCF50633 Main Battery Charger.
+ Say Y to include support for NXP PCF50633 Main Battery Charger.
config BATTERY_RX51
tristate "Nokia RX-51 (N900) battery driver"
@@ -609,15 +609,15 @@ config CHARGER_TPS65090
tristate "TPS65090 battery charger driver"
depends on MFD_TPS65090
help
- Say Y here to enable support for battery charging with TPS65090
- PMIC chips.
+ Say Y here to enable support for battery charging with TPS65090
+ PMIC chips.
config CHARGER_TPS65217
tristate "TPS65217 battery charger driver"
depends on MFD_TPS65217
help
- Say Y here to enable support for battery charging with TPS65217
- PMIC chips.
+ Say Y here to enable support for battery charging with TPS65217
+ PMIC chips.
config BATTERY_GAUGE_LTC2941
tristate "LTC2941/LTC2943 Battery Gauge Driver"
@@ -671,16 +671,16 @@ config CHARGER_SC2731
tristate "Spreadtrum SC2731 charger driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
help
- Say Y here to enable support for battery charging with SC2731
- PMIC chips.
+ Say Y here to enable support for battery charging with SC2731
+ PMIC chips.
config FUEL_GAUGE_SC27XX
tristate "Spreadtrum SC27XX fuel gauge driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
depends on IIO
help
- Say Y here to enable support for fuel gauge with SC27XX
- PMIC chips.
+ Say Y here to enable support for fuel gauge with SC27XX
+ PMIC chips.
config CHARGER_UCS1002
tristate "Microchip UCS1002 USB Port Power Controller"
@@ -698,9 +698,9 @@ config CHARGER_BD70528
select LINEAR_RANGES
default n
help
- Say Y here to enable support for getting battery status
- information and altering charger configurations from charger
- block of the ROHM BD70528 Power Management IC.
+ Say Y here to enable support for getting battery status
+ information and altering charger configurations from charger
+ block of the ROHM BD70528 Power Management IC.
config CHARGER_BD99954
tristate "ROHM bd99954 charger driver"
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
WARNING: multiple messages have this Message-ID (diff)
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Mark Rutland <mark.rutland@arm.com>,
Andrei Stefanescu <andrei.stefanescu@microchip.com>,
Heiko Stuebner <heiko@sntech.de>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Tony Lindgren <tony@atomide.com>,
Linus Walleij <linus.walleij@linaro.org>,
Brendan Higgins <brendanhiggins@google.com>,
Sebastian Reichel <sre@kernel.org>,
Andreas Kemnade <andreas@kemnade.info>,
"Angelo G. Del Regno" <kholk11@gmail.com>,
Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>,
linux-samsung-soc@vger.kernel.org,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Axel Lin <axel.lin@ingics.com>,
Gregory CLEMENT <gregory.clement@bootlin.com>,
linux-pm@vger.kernel.org, Krzysztof Kozlowski <krzk@kernel.org>,
Markus Reichl <m.reichl@fivetechno.de>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Chen-Yu Tsai <wens@csie.org>, Andy Gross <agross@kernel.org>,
markus.laine@fi.rohmeurope.com,
Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
devicetree@vger.kernel.org,
Charles Keepax <ckeepax@opensource.cirrus.com>,
linux-omap@vger.kernel.org,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
linux-arm-msm@vger.kernel.org,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Mark Brown <broonie@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
linux-arm-kernel@lists.infradead.org,
Support Opensource <support.opensource@diasemi.com>,
Baolin Wang <baolin.wang@linaro.org>,
Sangbeom Kim <sbkim73@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, mikko.mutanen@fi.rohmeurope.com,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
patches@opensource.cirrus.com
Subject: [PATCH v10 10/11] power: supply: Fix Kconfig help text indentiation
Date: Wed, 15 Apr 2020 08:23:40 +0300 [thread overview]
Message-ID: <23314fb63b66f5f4816e052f0d7ff0e7927c0e78.1586925868.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1586925868.git.matti.vaittinen@fi.rohmeurope.com>
Indent the help text as explained in
Documentation/process/coding-style.rst
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
No changes since v9
I just learned the help text in Kconfigs should be indented by two
spaces. I fixed this for BD99954 as suggested by Randy and decided
that I could do this for few other entries as well while I was at
it anyways.
drivers/power/supply/Kconfig | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 436680ee8523..ec028e47c3c2 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -415,7 +415,7 @@ config CHARGER_PCF50633
tristate "NXP PCF50633 MBC"
depends on MFD_PCF50633
help
- Say Y to include support for NXP PCF50633 Main Battery Charger.
+ Say Y to include support for NXP PCF50633 Main Battery Charger.
config BATTERY_RX51
tristate "Nokia RX-51 (N900) battery driver"
@@ -609,15 +609,15 @@ config CHARGER_TPS65090
tristate "TPS65090 battery charger driver"
depends on MFD_TPS65090
help
- Say Y here to enable support for battery charging with TPS65090
- PMIC chips.
+ Say Y here to enable support for battery charging with TPS65090
+ PMIC chips.
config CHARGER_TPS65217
tristate "TPS65217 battery charger driver"
depends on MFD_TPS65217
help
- Say Y here to enable support for battery charging with TPS65217
- PMIC chips.
+ Say Y here to enable support for battery charging with TPS65217
+ PMIC chips.
config BATTERY_GAUGE_LTC2941
tristate "LTC2941/LTC2943 Battery Gauge Driver"
@@ -671,16 +671,16 @@ config CHARGER_SC2731
tristate "Spreadtrum SC2731 charger driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
help
- Say Y here to enable support for battery charging with SC2731
- PMIC chips.
+ Say Y here to enable support for battery charging with SC2731
+ PMIC chips.
config FUEL_GAUGE_SC27XX
tristate "Spreadtrum SC27XX fuel gauge driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
depends on IIO
help
- Say Y here to enable support for fuel gauge with SC27XX
- PMIC chips.
+ Say Y here to enable support for fuel gauge with SC27XX
+ PMIC chips.
config CHARGER_UCS1002
tristate "Microchip UCS1002 USB Port Power Controller"
@@ -698,9 +698,9 @@ config CHARGER_BD70528
select LINEAR_RANGES
default n
help
- Say Y here to enable support for getting battery status
- information and altering charger configurations from charger
- block of the ROHM BD70528 Power Management IC.
+ Say Y here to enable support for getting battery status
+ information and altering charger configurations from charger
+ block of the ROHM BD70528 Power Management IC.
config CHARGER_BD99954
tristate "ROHM bd99954 charger driver"
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Mark Rutland <mark.rutland@arm.com>,
Andrei Stefanescu <andrei.stefanescu@microchip.com>,
Heiko Stuebner <heiko@sntech.de>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Tony Lindgren <tony@atomide.com>,
Linus Walleij <linus.walleij@linaro.org>,
Brendan Higgins <brendanhiggins@google.com>,
Sebastian Reichel <sre@kernel.org>,
Andreas Kemnade <andreas@kemnade.info>,
"Angelo G. Del Regno" <kholk11@gmail.com>,
Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>,
linux-samsung-soc@vger.kernel.org,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Axel Lin <axel.lin@ingics.com>,
Gregory CLEMENT <gregory.clement@bootlin.com>,
linux-pm@vger.kernel.org, Krzysztof Kozlowski <krzk@kernel.org>,
Markus Reichl <m.reichl@fivetechno.de>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Chen-Yu Tsai <wens@csie.org>, Andy Gross <agross@kernel.org>,
markus.laine@fi.rohmeurope.com,
Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
devicetree@vger.kernel.org,
Charles Keepax <ckeepax@opensource.cirrus.com>,
linux-omap@vger.kernel.org,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
linux-arm-msm@vger.kernel.org,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Mark Brown <broonie@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
linux-arm-kernel@lists.infradead.org,
Support Opensource <support.opensource@diasemi.com>,
Baolin Wang <baolin.wang@linaro.org>,
Sangbeom Kim <sbkim73@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, mikko.mutanen@fi.rohmeurope.com,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
patches@opensource.cirrus.com
Subject: [PATCH v10 10/11] power: supply: Fix Kconfig help text indentiation
Date: Wed, 15 Apr 2020 08:23:40 +0300 [thread overview]
Message-ID: <23314fb63b66f5f4816e052f0d7ff0e7927c0e78.1586925868.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1586925868.git.matti.vaittinen@fi.rohmeurope.com>
Indent the help text as explained in
Documentation/process/coding-style.rst
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
No changes since v9
I just learned the help text in Kconfigs should be indented by two
spaces. I fixed this for BD99954 as suggested by Randy and decided
that I could do this for few other entries as well while I was at
it anyways.
drivers/power/supply/Kconfig | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 436680ee8523..ec028e47c3c2 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -415,7 +415,7 @@ config CHARGER_PCF50633
tristate "NXP PCF50633 MBC"
depends on MFD_PCF50633
help
- Say Y to include support for NXP PCF50633 Main Battery Charger.
+ Say Y to include support for NXP PCF50633 Main Battery Charger.
config BATTERY_RX51
tristate "Nokia RX-51 (N900) battery driver"
@@ -609,15 +609,15 @@ config CHARGER_TPS65090
tristate "TPS65090 battery charger driver"
depends on MFD_TPS65090
help
- Say Y here to enable support for battery charging with TPS65090
- PMIC chips.
+ Say Y here to enable support for battery charging with TPS65090
+ PMIC chips.
config CHARGER_TPS65217
tristate "TPS65217 battery charger driver"
depends on MFD_TPS65217
help
- Say Y here to enable support for battery charging with TPS65217
- PMIC chips.
+ Say Y here to enable support for battery charging with TPS65217
+ PMIC chips.
config BATTERY_GAUGE_LTC2941
tristate "LTC2941/LTC2943 Battery Gauge Driver"
@@ -671,16 +671,16 @@ config CHARGER_SC2731
tristate "Spreadtrum SC2731 charger driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
help
- Say Y here to enable support for battery charging with SC2731
- PMIC chips.
+ Say Y here to enable support for battery charging with SC2731
+ PMIC chips.
config FUEL_GAUGE_SC27XX
tristate "Spreadtrum SC27XX fuel gauge driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
depends on IIO
help
- Say Y here to enable support for fuel gauge with SC27XX
- PMIC chips.
+ Say Y here to enable support for fuel gauge with SC27XX
+ PMIC chips.
config CHARGER_UCS1002
tristate "Microchip UCS1002 USB Port Power Controller"
@@ -698,9 +698,9 @@ config CHARGER_BD70528
select LINEAR_RANGES
default n
help
- Say Y here to enable support for getting battery status
- information and altering charger configurations from charger
- block of the ROHM BD70528 Power Management IC.
+ Say Y here to enable support for getting battery status
+ information and altering charger configurations from charger
+ block of the ROHM BD70528 Power Management IC.
config CHARGER_BD99954
tristate "ROHM bd99954 charger driver"
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-04-29 7:07 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-15 5:16 [PATCH v10 00/11] Support ROHM BD99954 charger IC Matti Vaittinen
2020-04-29 6:52 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:16 ` [PATCH " Matti Vaittinen
2020-04-15 5:17 ` [PATCH v10 01/11] lib: add linear ranges helpers Matti Vaittinen
2020-04-29 6:53 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:17 ` [PATCH " Matti Vaittinen
2020-04-15 5:17 ` [PATCH v10 02/11] lib/test_linear_ranges: add a test for the 'linear_ranges' Matti Vaittinen
2020-04-29 6:54 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:17 ` [PATCH " Matti Vaittinen
2020-04-15 5:18 ` [PATCH v10 03/11] power: supply: bd70528: rename linear_range to avoid collision Matti Vaittinen
2020-04-29 6:56 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:18 ` [PATCH " Matti Vaittinen
2020-04-15 5:20 ` [PATCH v10 04/11] regulator: use linear_ranges helper Matti Vaittinen
2020-04-29 6:57 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:20 ` [PATCH " Matti Vaittinen
2020-04-15 5:21 ` [PATCH v10 05/11] power: supply: bd70528: use linear ranges Matti Vaittinen
2020-04-29 6:59 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:21 ` [PATCH " Matti Vaittinen
2020-04-15 5:21 ` [PATCH v10 06/11] dt-bindings: battery: add new battery parameters Matti Vaittinen
2020-04-29 7:00 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:21 ` [PATCH " Matti Vaittinen
2020-04-15 5:22 ` [PATCH v10 07/11] power: supply: add " Matti Vaittinen
2020-04-29 7:01 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:22 ` [PATCH " Matti Vaittinen
2020-04-15 5:22 ` [PATCH v10 08/11] dt_bindings: ROHM BD99954 Charger Matti Vaittinen
2020-04-29 7:03 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:22 ` [PATCH " Matti Vaittinen
2020-04-15 5:23 ` [PATCH v10 09/11] power: supply: Support ROHM bd99954 charger Matti Vaittinen
2020-04-29 7:04 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:23 ` [PATCH " Matti Vaittinen
2020-04-15 5:23 ` Matti Vaittinen [this message]
2020-04-29 7:05 ` [RESEND PATCH v10 10/11] power: supply: Fix Kconfig help text indentiation Matti Vaittinen
2020-04-15 5:23 ` [PATCH " Matti Vaittinen
2020-04-15 5:24 ` [PATCH v10 11/11] power: supply: KConfig cleanup default n Matti Vaittinen
2020-04-29 7:07 ` [RESEND PATCH " Matti Vaittinen
2020-04-15 5:24 ` [PATCH " Matti Vaittinen
2020-04-15 10:10 ` Andy Shevchenko
2020-04-15 10:10 ` Andy Shevchenko
2020-05-03 15:29 ` [PATCH v10 00/11] Support ROHM BD99954 charger IC Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=23314fb63b66f5f4816e052f0d7ff0e7927c0e78.1586925868.git.matti.vaittinen@fi.rohmeurope.com \
--to=matti.vaittinen@fi.rohmeurope.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mazziesaccount@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.