* [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
@ 2020-03-13 10:29 ` Shreeya Patel
0 siblings, 0 replies; 10+ messages in thread
From: Shreeya Patel @ 2020-03-13 10:29 UTC (permalink / raw)
To: gregkh, devel, linux-kernel, outreachy-kernel, sbrivio,
daniel.baluta, nramas, hverkuil, shreeya.patel23498,
Larry.Finger
Remove unnecessary if and else conditions since both are leading to the
initialization of "phtpriv->ampdu_enable" with the same value.
Also, remove the unnecessary else-if condition since it does nothing.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
---
Changes in v2
- Remove unnecessary comments
- Remove unnecessary else-if condition which does nothing.
drivers/staging/rtl8723bs/core/rtw_mlme.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
index 71fcb466019a..d7a58af76ea0 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
@@ -2772,16 +2772,7 @@ void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len, u8 channe
/* maybe needs check if ap supports rx ampdu. */
if (!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable == 1) {
- if (pregistrypriv->wifi_spec == 1) {
- /* remove this part because testbed AP should disable RX AMPDU */
- /* phtpriv->ampdu_enable = false; */
- phtpriv->ampdu_enable = true;
- } else {
- phtpriv->ampdu_enable = true;
- }
- } else if (pregistrypriv->ampdu_enable == 2) {
- /* remove this part because testbed AP should disable RX AMPDU */
- /* phtpriv->ampdu_enable = true; */
+ phtpriv->ampdu_enable = true;
}
/* check Max Rx A-MPDU Size */
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
@ 2020-03-13 10:29 ` Shreeya Patel
0 siblings, 0 replies; 10+ messages in thread
From: Shreeya Patel @ 2020-03-13 10:29 UTC (permalink / raw)
To: gregkh, devel, linux-kernel, outreachy-kernel, sbrivio,
daniel.baluta, nramas, hverkuil, shreeya.patel23498,
Larry.Finger
Remove unnecessary if and else conditions since both are leading to the
initialization of "phtpriv->ampdu_enable" with the same value.
Also, remove the unnecessary else-if condition since it does nothing.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
---
Changes in v2
- Remove unnecessary comments
- Remove unnecessary else-if condition which does nothing.
drivers/staging/rtl8723bs/core/rtw_mlme.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
index 71fcb466019a..d7a58af76ea0 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
@@ -2772,16 +2772,7 @@ void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len, u8 channe
/* maybe needs check if ap supports rx ampdu. */
if (!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable == 1) {
- if (pregistrypriv->wifi_spec == 1) {
- /* remove this part because testbed AP should disable RX AMPDU */
- /* phtpriv->ampdu_enable = false; */
- phtpriv->ampdu_enable = true;
- } else {
- phtpriv->ampdu_enable = true;
- }
- } else if (pregistrypriv->ampdu_enable == 2) {
- /* remove this part because testbed AP should disable RX AMPDU */
- /* phtpriv->ampdu_enable = true; */
+ phtpriv->ampdu_enable = true;
}
/* check Max Rx A-MPDU Size */
--
2.17.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
2020-03-13 10:29 ` Shreeya Patel
@ 2020-03-13 21:21 ` Joe Perches
-1 siblings, 0 replies; 10+ messages in thread
From: Joe Perches @ 2020-03-13 21:21 UTC (permalink / raw)
To: Shreeya Patel, gregkh, devel, linux-kernel, outreachy-kernel,
sbrivio, daniel.baluta, nramas, hverkuil, Larry.Finger
On Fri, 2020-03-13 at 15:59 +0530, Shreeya Patel wrote:
> Remove unnecessary if and else conditions since both are leading to the
> initialization of "phtpriv->ampdu_enable" with the same value.
> Also, remove the unnecessary else-if condition since it does nothing.
[]
> diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
[]
> @@ -2772,16 +2772,7 @@ void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len, u8 channe
>
> /* maybe needs check if ap supports rx ampdu. */
> if (!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable == 1) {
> - if (pregistrypriv->wifi_spec == 1) {
> - /* remove this part because testbed AP should disable RX AMPDU */
> - /* phtpriv->ampdu_enable = false; */
> - phtpriv->ampdu_enable = true;
> - } else {
> - phtpriv->ampdu_enable = true;
> - }
> - } else if (pregistrypriv->ampdu_enable == 2) {
> - /* remove this part because testbed AP should disable RX AMPDU */
> - /* phtpriv->ampdu_enable = true; */
> + phtpriv->ampdu_enable = true;
This isn't the same test.
This could be:
if ((!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable == 1)) ||
pregistrypriv->ampdu_enable == 2)
phtpriv->ampdu_enable = true;
Though it is probably more sensible to just set
phtpriv->ampdu_enable without testing whether or
not it's already set:
if (pregistrypriv->ampdu_enable == 1 ||
pregistrypriv->ampdu_enable == 2)
phtpriv->ampdu_enable = true;
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
@ 2020-03-13 21:21 ` Joe Perches
0 siblings, 0 replies; 10+ messages in thread
From: Joe Perches @ 2020-03-13 21:21 UTC (permalink / raw)
To: Shreeya Patel, gregkh, devel, linux-kernel, outreachy-kernel,
sbrivio, daniel.baluta, nramas, hverkuil, Larry.Finger
On Fri, 2020-03-13 at 15:59 +0530, Shreeya Patel wrote:
> Remove unnecessary if and else conditions since both are leading to the
> initialization of "phtpriv->ampdu_enable" with the same value.
> Also, remove the unnecessary else-if condition since it does nothing.
[]
> diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
[]
> @@ -2772,16 +2772,7 @@ void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len, u8 channe
>
> /* maybe needs check if ap supports rx ampdu. */
> if (!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable == 1) {
> - if (pregistrypriv->wifi_spec == 1) {
> - /* remove this part because testbed AP should disable RX AMPDU */
> - /* phtpriv->ampdu_enable = false; */
> - phtpriv->ampdu_enable = true;
> - } else {
> - phtpriv->ampdu_enable = true;
> - }
> - } else if (pregistrypriv->ampdu_enable == 2) {
> - /* remove this part because testbed AP should disable RX AMPDU */
> - /* phtpriv->ampdu_enable = true; */
> + phtpriv->ampdu_enable = true;
This isn't the same test.
This could be:
if ((!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable == 1)) ||
pregistrypriv->ampdu_enable == 2)
phtpriv->ampdu_enable = true;
Though it is probably more sensible to just set
phtpriv->ampdu_enable without testing whether or
not it's already set:
if (pregistrypriv->ampdu_enable == 1 ||
pregistrypriv->ampdu_enable == 2)
phtpriv->ampdu_enable = true;
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
2020-03-13 21:21 ` Joe Perches
@ 2020-03-14 11:28 ` Shreeya Patel
-1 siblings, 0 replies; 10+ messages in thread
From: Shreeya Patel @ 2020-03-14 11:28 UTC (permalink / raw)
To: Joe Perches, gregkh, devel, linux-kernel, outreachy-kernel,
sbrivio, daniel.baluta, nramas, hverkuil, Larry.Finger
On Fri, 2020-03-13 at 14:21 -0700, Joe Perches wrote:
Hi Joe,
> On Fri, 2020-03-13 at 15:59 +0530, Shreeya Patel wrote:
> > Remove unnecessary if and else conditions since both are leading to
> > the
> > initialization of "phtpriv->ampdu_enable" with the same value.
> > Also, remove the unnecessary else-if condition since it does
> > nothing.
>
> []
> > diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c
> > b/drivers/staging/rtl8723bs/core/rtw_mlme.c
>
> []
> > @@ -2772,16 +2772,7 @@ void rtw_update_ht_cap(struct adapter
> > *padapter, u8 *pie, uint ie_len, u8 channe
> >
> > /* maybe needs check if ap supports rx ampdu. */
> > if (!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable ==
> > 1) {
> > - if (pregistrypriv->wifi_spec == 1) {
> > - /* remove this part because testbed AP should
> > disable RX AMPDU */
> > - /* phtpriv->ampdu_enable = false; */
> > - phtpriv->ampdu_enable = true;
> > - } else {
> > - phtpriv->ampdu_enable = true;
> > - }
> > - } else if (pregistrypriv->ampdu_enable == 2) {
> > - /* remove this part because testbed AP should disable
> > RX AMPDU */
> > - /* phtpriv->ampdu_enable = true; */
> > + phtpriv->ampdu_enable = true;
>
> This isn't the same test.
>
> This could be:
> if ((!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable ==
> 1)) ||
> pregistrypriv->ampdu_enable == 2)
> phtpriv->ampdu_enable = true;
>
> Though it is probably more sensible to just set
> phtpriv->ampdu_enable without testing whether or
> not it's already set:
>
> if (pregistrypriv->ampdu_enable == 1 ||
> pregistrypriv->ampdu_enable == 2)
> phtpriv->ampdu_enable = true;
But the else-if block which I removed in v2 of this patch had nothing
in the block.
It was not assigning any value to "phtpriv->ampdu_enable". ( basically
it was empty and useless)
Now as per your suggestion if I do the change then the value of
"phtpriv->ampdu_enable" will be changed to true when we have
"pregistrypriv->ampdu_enable == 2" condition. But in real it should be
the same as it was by default coming from the start of the function.
( This is because the else-if block was empty and doing nothing )
Please let me know if I was able to make you understand my point of
view here. Also, please correct me if I am wrong.
Thanks
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
@ 2020-03-14 11:28 ` Shreeya Patel
0 siblings, 0 replies; 10+ messages in thread
From: Shreeya Patel @ 2020-03-14 11:28 UTC (permalink / raw)
To: Joe Perches, gregkh, devel, linux-kernel, outreachy-kernel,
sbrivio, daniel.baluta, nramas, hverkuil, Larry.Finger
On Fri, 2020-03-13 at 14:21 -0700, Joe Perches wrote:
Hi Joe,
> On Fri, 2020-03-13 at 15:59 +0530, Shreeya Patel wrote:
> > Remove unnecessary if and else conditions since both are leading to
> > the
> > initialization of "phtpriv->ampdu_enable" with the same value.
> > Also, remove the unnecessary else-if condition since it does
> > nothing.
>
> []
> > diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c
> > b/drivers/staging/rtl8723bs/core/rtw_mlme.c
>
> []
> > @@ -2772,16 +2772,7 @@ void rtw_update_ht_cap(struct adapter
> > *padapter, u8 *pie, uint ie_len, u8 channe
> >
> > /* maybe needs check if ap supports rx ampdu. */
> > if (!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable ==
> > 1) {
> > - if (pregistrypriv->wifi_spec == 1) {
> > - /* remove this part because testbed AP should
> > disable RX AMPDU */
> > - /* phtpriv->ampdu_enable = false; */
> > - phtpriv->ampdu_enable = true;
> > - } else {
> > - phtpriv->ampdu_enable = true;
> > - }
> > - } else if (pregistrypriv->ampdu_enable == 2) {
> > - /* remove this part because testbed AP should disable
> > RX AMPDU */
> > - /* phtpriv->ampdu_enable = true; */
> > + phtpriv->ampdu_enable = true;
>
> This isn't the same test.
>
> This could be:
> if ((!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable ==
> 1)) ||
> pregistrypriv->ampdu_enable == 2)
> phtpriv->ampdu_enable = true;
>
> Though it is probably more sensible to just set
> phtpriv->ampdu_enable without testing whether or
> not it's already set:
>
> if (pregistrypriv->ampdu_enable == 1 ||
> pregistrypriv->ampdu_enable == 2)
> phtpriv->ampdu_enable = true;
But the else-if block which I removed in v2 of this patch had nothing
in the block.
It was not assigning any value to "phtpriv->ampdu_enable". ( basically
it was empty and useless)
Now as per your suggestion if I do the change then the value of
"phtpriv->ampdu_enable" will be changed to true when we have
"pregistrypriv->ampdu_enable == 2" condition. But in real it should be
the same as it was by default coming from the start of the function.
( This is because the else-if block was empty and doing nothing )
Please let me know if I was able to make you understand my point of
view here. Also, please correct me if I am wrong.
Thanks
>
>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
2020-03-14 11:28 ` Shreeya Patel
@ 2020-03-15 4:32 ` Joe Perches
-1 siblings, 0 replies; 10+ messages in thread
From: Joe Perches @ 2020-03-15 4:32 UTC (permalink / raw)
To: Shreeya Patel, gregkh, devel, linux-kernel, outreachy-kernel,
sbrivio, daniel.baluta, nramas, hverkuil, Larry.Finger
On Sat, 2020-03-14 at 16:58 +0530, Shreeya Patel wrote:
> This could be:
> > if ((!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable ==
> > 1)) ||
> > pregistrypriv->ampdu_enable == 2)
> > phtpriv->ampdu_enable = true;
> >
> > Though it is probably more sensible to just set
> > phtpriv->ampdu_enable without testing whether or
> > not it's already set:
> >
> > if (pregistrypriv->ampdu_enable == 1 ||
> > pregistrypriv->ampdu_enable == 2)
> > phtpriv->ampdu_enable = true;
>
> But the else-if block which I removed in v2 of this patch had nothing
> in the block.
> It was not assigning any value to "phtpriv->ampdu_enable". ( basically
> it was empty and useless)
Right, I misread the deletions from patch.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
@ 2020-03-15 4:32 ` Joe Perches
0 siblings, 0 replies; 10+ messages in thread
From: Joe Perches @ 2020-03-15 4:32 UTC (permalink / raw)
To: Shreeya Patel, gregkh, devel, linux-kernel, outreachy-kernel,
sbrivio, daniel.baluta, nramas, hverkuil, Larry.Finger
On Sat, 2020-03-14 at 16:58 +0530, Shreeya Patel wrote:
> This could be:
> > if ((!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable ==
> > 1)) ||
> > pregistrypriv->ampdu_enable == 2)
> > phtpriv->ampdu_enable = true;
> >
> > Though it is probably more sensible to just set
> > phtpriv->ampdu_enable without testing whether or
> > not it's already set:
> >
> > if (pregistrypriv->ampdu_enable == 1 ||
> > pregistrypriv->ampdu_enable == 2)
> > phtpriv->ampdu_enable = true;
>
> But the else-if block which I removed in v2 of this patch had nothing
> in the block.
> It was not assigning any value to "phtpriv->ampdu_enable". ( basically
> it was empty and useless)
Right, I misread the deletions from patch.
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
2020-03-13 10:29 ` Shreeya Patel
@ 2020-03-15 21:27 ` Stefano Brivio
-1 siblings, 0 replies; 10+ messages in thread
From: Stefano Brivio @ 2020-03-15 21:27 UTC (permalink / raw)
To: Shreeya Patel
Cc: gregkh, devel, linux-kernel, outreachy-kernel, daniel.baluta,
nramas, hverkuil, Larry.Finger
On Fri, 13 Mar 2020 15:59:12 +0530
Shreeya Patel <shreeya.patel23498@gmail.com> wrote:
> Remove unnecessary if and else conditions since both are leading to the
> initialization of "phtpriv->ampdu_enable" with the same value.
> Also, remove the unnecessary else-if condition since it does nothing.
>
> Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
> ---
>
> Changes in v2
> - Remove unnecessary comments
> - Remove unnecessary else-if condition which does nothing.
>
> drivers/staging/rtl8723bs/core/rtw_mlme.c | 11 +----------
> 1 file changed, 1 insertion(+), 10 deletions(-)
>
> diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
> index 71fcb466019a..d7a58af76ea0 100644
> --- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
> +++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
> @@ -2772,16 +2772,7 @@ void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len, u8 channe
>
> /* maybe needs check if ap supports rx ampdu. */
> if (!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable == 1) {
> - if (pregistrypriv->wifi_spec == 1) {
> - /* remove this part because testbed AP should disable RX AMPDU */
> - /* phtpriv->ampdu_enable = false; */
> - phtpriv->ampdu_enable = true;
> - } else {
> - phtpriv->ampdu_enable = true;
> - }
> - } else if (pregistrypriv->ampdu_enable == 2) {
> - /* remove this part because testbed AP should disable RX AMPDU */
> - /* phtpriv->ampdu_enable = true; */
> + phtpriv->ampdu_enable = true;
I suspect this is actually a bug, that is:
os_dep/os_intfs.c:74:static int rtw_ampdu_enable = 1;/* for enable tx_ampdu ,0: disable, 0x1:enable (but wifi_spec should be 0), 0x2: force enable (don't care wifi_spec) */
and that seems to actually map to the ampdu_enable field in
pregistrypriv.
However, I wouldn't change this without testing it on the actual
hardware, change looks good to me and doesn't affect functionality,
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
--
Stefano
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
@ 2020-03-15 21:27 ` Stefano Brivio
0 siblings, 0 replies; 10+ messages in thread
From: Stefano Brivio @ 2020-03-15 21:27 UTC (permalink / raw)
To: Shreeya Patel
Cc: devel, daniel.baluta, outreachy-kernel, gregkh, linux-kernel,
hverkuil, nramas, Larry.Finger
On Fri, 13 Mar 2020 15:59:12 +0530
Shreeya Patel <shreeya.patel23498@gmail.com> wrote:
> Remove unnecessary if and else conditions since both are leading to the
> initialization of "phtpriv->ampdu_enable" with the same value.
> Also, remove the unnecessary else-if condition since it does nothing.
>
> Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
> ---
>
> Changes in v2
> - Remove unnecessary comments
> - Remove unnecessary else-if condition which does nothing.
>
> drivers/staging/rtl8723bs/core/rtw_mlme.c | 11 +----------
> 1 file changed, 1 insertion(+), 10 deletions(-)
>
> diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
> index 71fcb466019a..d7a58af76ea0 100644
> --- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
> +++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
> @@ -2772,16 +2772,7 @@ void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len, u8 channe
>
> /* maybe needs check if ap supports rx ampdu. */
> if (!(phtpriv->ampdu_enable) && pregistrypriv->ampdu_enable == 1) {
> - if (pregistrypriv->wifi_spec == 1) {
> - /* remove this part because testbed AP should disable RX AMPDU */
> - /* phtpriv->ampdu_enable = false; */
> - phtpriv->ampdu_enable = true;
> - } else {
> - phtpriv->ampdu_enable = true;
> - }
> - } else if (pregistrypriv->ampdu_enable == 2) {
> - /* remove this part because testbed AP should disable RX AMPDU */
> - /* phtpriv->ampdu_enable = true; */
> + phtpriv->ampdu_enable = true;
I suspect this is actually a bug, that is:
os_dep/os_intfs.c:74:static int rtw_ampdu_enable = 1;/* for enable tx_ampdu ,0: disable, 0x1:enable (but wifi_spec should be 0), 0x2: force enable (don't care wifi_spec) */
and that seems to actually map to the ampdu_enable field in
pregistrypriv.
However, I wouldn't change this without testing it on the actual
hardware, change looks good to me and doesn't affect functionality,
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
--
Stefano
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-03-15 21:27 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-13 10:29 [Outreachy kernel] [PATCH v2] Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions Shreeya Patel
2020-03-13 10:29 ` Shreeya Patel
2020-03-13 21:21 ` Joe Perches
2020-03-13 21:21 ` Joe Perches
2020-03-14 11:28 ` Shreeya Patel
2020-03-14 11:28 ` Shreeya Patel
2020-03-15 4:32 ` Joe Perches
2020-03-15 4:32 ` Joe Perches
2020-03-15 21:27 ` Stefano Brivio
2020-03-15 21:27 ` Stefano Brivio
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.