[Intel-wired-lan] [next PATCH S62 0/6] i40e/i40evf updates

[Intel-wired-lan] [next PATCH S62 0/6] i40e/i40evf updates

[Bimmy Pujari]

Alexander Duyck adds code to clean up handling of private flags.

Christopher Bednarz adds code to check for new arq elements before 
leaving the adminq subtask loop.

Jacob Keller removes a useless goto statement & removes 
FDIR_REQUIRES_REINIT driver flag.

Paul M Stillwell adds code to use register for XL722 control register 
read/write.

Preethi Banala adds code to enforce descriptor write-back mechanism for 
VF.

 drivers/net/ethernet/intel/i40e/i40e.h             |   9 -
 drivers/net/ethernet/intel/i40e/i40e_common.c      |   8 +-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     | 189 ++++++++++++---------
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  10 +-
 drivers/net/ethernet/intel/i40evf/i40e_common.c    |   8 +-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c      |  64 +------
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h      |  14 --
 .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    |   4 -
 8 files changed, 135 insertions(+), 171 deletions(-)

-- 
2.4.11

[Intel-wired-lan] [next PATCH S62 1/6] i40evf: enforce descriptor write-back mechanism for VF

[Bimmy Pujari]

From: Preethi Banala <preethi.banala@intel.com>

The current driver mode is to use a write-back mechanism for the head
register which indicates transmit completions. The VF driver needs to be
able to work on hardware that exclusively uses descriptor write-back, so
change the default driver mode of operation to descriptor write-back for
VF. In our analysis, performance wasn't significantly different with
either write-back method.

Testing Hints:
1) load PF driver in host
2) create two VMs and load VF driver in both
3) create SRIOV VFs in host and direct attach one VF to each VM
4) Assign ip address in the same subnet for both VFs.
5) Use iperf to send TCP/UDP traffic.

Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Change-ID: Ia92e4ec77c2df8dc4515c71d53746d57d77759af
---
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c      | 64 +++-------------------
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h      | 14 -----
 .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    |  4 --
 3 files changed, 7 insertions(+), 75 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 8915c55..f1a99a8 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -137,10 +137,7 @@ u32 i40evf_get_tx_pending(struct i40e_ring *ring, bool in_sw)
 {
 	u32 head, tail;
 
-	if (!in_sw)
-		head = i40e_get_head(ring);
-	else
-		head = ring->next_to_clean;
+	head = ring->next_to_clean;
 	tail = readl(ring->tail);
 
 	if (head != tail)
@@ -165,7 +162,6 @@ static bool i40e_clean_tx_irq(struct i40e_vsi *vsi,
 {
 	u16 i = tx_ring->next_to_clean;
 	struct i40e_tx_buffer *tx_buf;
-	struct i40e_tx_desc *tx_head;
 	struct i40e_tx_desc *tx_desc;
 	unsigned int total_bytes = 0, total_packets = 0;
 	unsigned int budget = vsi->work_limit;
@@ -174,8 +170,6 @@ static bool i40e_clean_tx_irq(struct i40e_vsi *vsi,
 	tx_desc = I40E_TX_DESC(tx_ring, i);
 	i -= tx_ring->count;
 
-	tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring));
-
 	do {
 		struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
 
@@ -186,8 +180,9 @@ static bool i40e_clean_tx_irq(struct i40e_vsi *vsi,
 		/* prevent any other reads prior to eop_desc */
 		read_barrier_depends();
 
-		/* we have caught up to head, no work left to do */
-		if (tx_head == tx_desc)
+		/* if the descriptor isn't done, no work yet to do */
+		if (!(eop_desc->cmd_type_offset_bsz &
+		      cpu_to_le64(I40E_TX_DESC_DTYPE_DESC_DONE)))
 			break;
 
 		/* clear next_to_watch to prevent false hangs */
@@ -464,10 +459,6 @@ int i40evf_setup_tx_descriptors(struct i40e_ring *tx_ring)
 
 	/* round up to nearest 4K */
 	tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc);
-	/* add u32 for head writeback, align after this takes care of
-	 * guaranteeing this is at least one cache line in size
-	 */
-	tx_ring->size += sizeof(u32);
 	tx_ring->size = ALIGN(tx_ring->size, 4096);
 	tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
 					   &tx_ring->dma, GFP_KERNEL);
@@ -2012,7 +2003,6 @@ static inline void i40evf_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	u16 i = tx_ring->next_to_use;
 	u32 td_tag = 0;
 	dma_addr_t dma;
-	u16 desc_count = 1;
 
 	if (tx_flags & I40E_TX_FLAGS_HW_VLAN) {
 		td_cmd |= I40E_TX_DESC_CMD_IL2TAG1;
@@ -2048,7 +2038,6 @@ static inline void i40evf_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 			tx_desc++;
 			i++;
-			desc_count++;
 
 			if (i == tx_ring->count) {
 				tx_desc = I40E_TX_DESC(tx_ring, 0);
@@ -2070,7 +2059,6 @@ static inline void i40evf_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 		tx_desc++;
 		i++;
-		desc_count++;
 
 		if (i == tx_ring->count) {
 			tx_desc = I40E_TX_DESC(tx_ring, 0);
@@ -2096,46 +2084,8 @@ static inline void i40evf_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 	i40e_maybe_stop_tx(tx_ring, DESC_NEEDED);
 
-	/* write last descriptor with EOP bit */
-	td_cmd |= I40E_TX_DESC_CMD_EOP;
-
-	/* We can OR these values together as they both are checked against
-	 * 4 below and at this point desc_count will be used as a boolean value
-	 * after this if/else block.
-	 */
-	desc_count |= ++tx_ring->packet_stride;
-
-	/* Algorithm to optimize tail and RS bit setting:
-	 * if queue is stopped
-	 *	mark RS bit
-	 *	reset packet counter
-	 * else if xmit_more is supported and is true
-	 *	advance packet counter to 4
-	 *	reset desc_count to 0
-	 *
-	 * if desc_count >= 4
-	 *	mark RS bit
-	 *	reset packet counter
-	 * if desc_count > 0
-	 *	update tail
-	 *
-	 * Note: If there are less than 4 descriptors
-	 * pending and interrupts were disabled the service task will
-	 * trigger a force WB.
-	 */
-	if (netif_xmit_stopped(txring_txq(tx_ring))) {
-		goto do_rs;
-	} else if (skb->xmit_more) {
-		/* set stride to arm on next packet and reset desc_count */
-		tx_ring->packet_stride = WB_STRIDE;
-		desc_count = 0;
-	} else if (desc_count >= WB_STRIDE) {
-do_rs:
-		/* write last descriptor with RS bit set */
-		td_cmd |= I40E_TX_DESC_CMD_RS;
-		tx_ring->packet_stride = 0;
-	}
-
+	/* write last descriptor with RS and EOP bits */
+	td_cmd |= I40E_TXD_CMD;
 	tx_desc->cmd_type_offset_bsz =
 			build_ctob(td_cmd, td_offset, size, td_tag);
 
@@ -2151,7 +2101,7 @@ static inline void i40evf_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	first->next_to_watch = tx_desc;
 
 	/* notify HW of packet */
-	if (desc_count) {
+	if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) {
 		writel(i, tx_ring->tail);
 
 		/* we need this if more than one processor can write to our tail
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index fc959f9..aba40ed 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -393,20 +393,6 @@ int __i40evf_maybe_stop_tx(struct i40e_ring *tx_ring, int size);
 bool __i40evf_chk_linearize(struct sk_buff *skb);
 
 /**
- * i40e_get_head - Retrieve head from head writeback
- * @tx_ring: Tx ring to fetch head of
- *
- * Returns value of Tx ring head based on value stored
- * in head write-back location
- **/
-static inline u32 i40e_get_head(struct i40e_ring *tx_ring)
-{
-	void *head = (struct i40e_tx_desc *)tx_ring->desc + tx_ring->count;
-
-	return le32_to_cpu(*(volatile __le32 *)head);
-}
-
-/**
  * i40e_xmit_descriptor_count - calculate number of Tx descriptors needed
  * @skb:     send buffer
  * @tx_ring: ring to send buffer on
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
index a2a7354..4bc2488 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
@@ -260,10 +260,6 @@ void i40evf_configure_queues(struct i40evf_adapter *adapter)
 		vqpi->txq.queue_id = i;
 		vqpi->txq.ring_len = adapter->tx_rings[i].count;
 		vqpi->txq.dma_ring_addr = adapter->tx_rings[i].dma;
-		vqpi->txq.headwb_enabled = 1;
-		vqpi->txq.dma_headwb_addr = vqpi->txq.dma_ring_addr +
-		    (vqpi->txq.ring_len * sizeof(struct i40e_tx_desc));
-
 		vqpi->rxq.vsi_id = vqci->vsi_id;
 		vqpi->rxq.queue_id = i;
 		vqpi->rxq.ring_len = adapter->rx_rings[i].count;
-- 
2.4.11

[Intel-wired-lan] [next PATCH S62 1/6] i40evf: enforce descriptor write-back mechanism for VF

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On
> Behalf Of Bimmy Pujari
> Sent: Friday, March 10, 2017 12:22 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [next PATCH S62 1/6] i40evf: enforce descriptor
> write-back mechanism for VF
> 
> From: Preethi Banala <preethi.banala@intel.com>
> 
> The current driver mode is to use a write-back mechanism for the head
> register which indicates transmit completions. The VF driver needs to be able
> to work on hardware that exclusively uses descriptor write-back, so change
> the default driver mode of operation to descriptor write-back for VF. In our
> analysis, performance wasn't significantly different with either write-back
> method.
> 
> Testing Hints:
> 1) load PF driver in host
> 2) create two VMs and load VF driver in both
> 3) create SRIOV VFs in host and direct attach one VF to each VM
> 4) Assign ip address in the same subnet for both VFs.
> 5) Use iperf to send TCP/UDP traffic.
> 
> Signed-off-by: Preethi Banala <preethi.banala@intel.com>
> Change-ID: Ia92e4ec77c2df8dc4515c71d53746d57d77759af
> ---
>  drivers/net/ethernet/intel/i40evf/i40e_txrx.c      | 64 +++-------------------
>  drivers/net/ethernet/intel/i40evf/i40e_txrx.h      | 14 -----
>  .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    |  4 --
>  3 files changed, 7 insertions(+), 75 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [next PATCH S62 2/6] i40e: Clean up handling of private flags

[Bimmy Pujari]

From: Alexander Duyck <alexander.h.duyck@intel.com>

This patch cleans up and addresses several issues in the way that i40e
handles private flags. Previously the code was choosing fixed bits and
trying to match them up with strings in a somewhat haphazard way. This
resulted in the possibility for adding a new bit and causing a mismatch as
the private flags are linear bits starting at 0, and the private flags in
the driver were split up over a group specific to the PF and a group that
was global.

What this change does is define an array of structs used to represent the
private flags. Contained within the structs are the bits necessary to know
which flags to set and/or clear depending on the state of the bit. By
doing this we can add new bits in the future with minimal overhead and
avoid creating possible mis-matches should we need to remove a flag based
on compile options.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Change-ID: Ia3214ab04f0ab2f70354ac0997a135f1d01b0acd
---
 drivers/net/ethernet/intel/i40e/i40e.h         |   8 --
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 189 +++++++++++++++----------
 2 files changed, 112 insertions(+), 85 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index be69d7e..e324b6f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -91,14 +91,6 @@
 #define I40E_QUEUE_WAIT_RETRY_LIMIT	10
 #define I40E_INT_NAME_STR_LEN		(IFNAMSIZ + 16)
 
-/* Ethtool Private Flags */
-#define I40E_PRIV_FLAGS_MFP_FLAG		BIT(0)
-#define I40E_PRIV_FLAGS_LINKPOLL_FLAG		BIT(1)
-#define I40E_PRIV_FLAGS_FD_ATR			BIT(2)
-#define I40E_PRIV_FLAGS_VEB_STATS		BIT(3)
-#define I40E_PRIV_FLAGS_HW_ATR_EVICT		BIT(4)
-#define I40E_PRIV_FLAGS_TRUE_PROMISC_SUPPORT	BIT(5)
-
 #define I40E_NVM_VERSION_LO_SHIFT	0
 #define I40E_NVM_VERSION_LO_MASK	(0xff << I40E_NVM_VERSION_LO_SHIFT)
 #define I40E_NVM_VERSION_HI_SHIFT	12
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 03ffd08..56dccf8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -207,22 +207,36 @@ static const char i40e_gstrings_test[][ETH_GSTRING_LEN] = {
 
 #define I40E_TEST_LEN (sizeof(i40e_gstrings_test) / ETH_GSTRING_LEN)
 
-static const char i40e_priv_flags_strings[][ETH_GSTRING_LEN] = {
-	"MFP",
-	"LinkPolling",
-	"flow-director-atr",
-	"veb-stats",
-	"hw-atr-eviction",
+struct i40e_priv_flags {
+	char flag_string[ETH_GSTRING_LEN];
+	u64 flag;
+	bool read_only;
 };
 
-#define I40E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_priv_flags_strings)
+#define I40E_PRIV_FLAG(_name, _flag, _read_only) { \
+	.flag_string = _name, \
+	.flag = _flag, \
+	.read_only = _read_only, \
+}
+
+static const struct i40e_priv_flags i40e_gstrings_priv_flags[] = {
+	/* NOTE: MFP setting cannot be changed */
+	I40E_PRIV_FLAG("MFP", I40E_FLAG_MFP_ENABLED, 1),
+	I40E_PRIV_FLAG("LinkPolling", I40E_FLAG_LINK_POLLING_ENABLED, 0),
+	I40E_PRIV_FLAG("flow-director-atr", I40E_FLAG_FD_ATR_ENABLED, 0),
+	I40E_PRIV_FLAG("veb-stats", I40E_FLAG_VEB_STATS_ENABLED, 0),
+	I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_CAPABLE, 0),
+};
+
+#define I40E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_gstrings_priv_flags)
 
 /* Private flags with a global effect, restricted to PF 0 */
-static const char i40e_gl_priv_flags_strings[][ETH_GSTRING_LEN] = {
-	"vf-true-promisc-support",
+static const struct i40e_priv_flags i40e_gl_gstrings_priv_flags[] = {
+	I40E_PRIV_FLAG("vf-true-promisc-support",
+		       I40E_FLAG_TRUE_PROMISC_SUPPORT, 0),
 };
 
-#define I40E_GL_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_gl_priv_flags_strings)
+#define I40E_GL_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_gl_gstrings_priv_flags)
 
 /**
  * i40e_partition_setting_complaint - generic complaint for MFP restriction
@@ -1660,12 +1674,18 @@ static void i40e_get_strings(struct net_device *netdev, u32 stringset,
 		/* BUG_ON(p - data != I40E_STATS_LEN * ETH_GSTRING_LEN); */
 		break;
 	case ETH_SS_PRIV_FLAGS:
-		memcpy(data, i40e_priv_flags_strings,
-		       I40E_PRIV_FLAGS_STR_LEN * ETH_GSTRING_LEN);
-		data += I40E_PRIV_FLAGS_STR_LEN * ETH_GSTRING_LEN;
-		if (pf->hw.pf_id == 0)
-			memcpy(data, i40e_gl_priv_flags_strings,
-			       I40E_GL_PRIV_FLAGS_STR_LEN * ETH_GSTRING_LEN);
+		for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
+			snprintf(p, ETH_GSTRING_LEN, "%s",
+				 i40e_gstrings_priv_flags[i].flag_string);
+			p += ETH_GSTRING_LEN;
+		}
+		if (pf->hw.pf_id != 0)
+			break;
+		for (i = 0; i < I40E_GL_PRIV_FLAGS_STR_LEN; i++) {
+			snprintf(p, ETH_GSTRING_LEN, "%s",
+				 i40e_gl_gstrings_priv_flags[i].flag_string);
+			p += ETH_GSTRING_LEN;
+		}
 		break;
 	default:
 		break;
@@ -3945,7 +3965,7 @@ static int i40e_set_rxfh(struct net_device *netdev, const u32 *indir,
  * @dev: network interface device structure
  *
  * The get string set count and the string set should be matched for each
- * flag returned.  Add new strings for each flag to the i40e_priv_flags_strings
+ * flag returned.  Add new strings for each flag to the i40e_gstrings_priv_flags
  * array.
  *
  * Returns a u32 bitmap of flags.
@@ -3955,19 +3975,27 @@ static u32 i40e_get_priv_flags(struct net_device *dev)
 	struct i40e_netdev_priv *np = netdev_priv(dev);
 	struct i40e_vsi *vsi = np->vsi;
 	struct i40e_pf *pf = vsi->back;
-	u32 ret_flags = 0;
-
-	ret_flags |= pf->flags & I40E_FLAG_LINK_POLLING_ENABLED ?
-		I40E_PRIV_FLAGS_LINKPOLL_FLAG : 0;
-	ret_flags |= pf->flags & I40E_FLAG_FD_ATR_ENABLED ?
-		I40E_PRIV_FLAGS_FD_ATR : 0;
-	ret_flags |= pf->flags & I40E_FLAG_VEB_STATS_ENABLED ?
-		I40E_PRIV_FLAGS_VEB_STATS : 0;
-	ret_flags |= pf->hw_disabled_flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE ?
-		0 : I40E_PRIV_FLAGS_HW_ATR_EVICT;
-	if (pf->hw.pf_id == 0) {
-		ret_flags |= pf->flags & I40E_FLAG_TRUE_PROMISC_SUPPORT ?
-			I40E_PRIV_FLAGS_TRUE_PROMISC_SUPPORT : 0;
+	u32 i, j, ret_flags = 0;
+
+	for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
+		const struct i40e_priv_flags *priv_flags;
+
+		priv_flags = &i40e_gstrings_priv_flags[i];
+
+		if (priv_flags->flag & pf->flags)
+			ret_flags |= BIT(i);
+	}
+
+	if (pf->hw.pf_id != 0)
+		return ret_flags;
+
+	for (j = 0; j < I40E_GL_PRIV_FLAGS_STR_LEN; j++) {
+		const struct i40e_priv_flags *priv_flags;
+
+		priv_flags = &i40e_gl_gstrings_priv_flags[j];
+
+		if (priv_flags->flag & pf->flags)
+			ret_flags |= BIT(i + j);
 	}
 
 	return ret_flags;
@@ -3983,54 +4011,65 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 	struct i40e_netdev_priv *np = netdev_priv(dev);
 	struct i40e_vsi *vsi = np->vsi;
 	struct i40e_pf *pf = vsi->back;
-	u16 sw_flags = 0, valid_flags = 0;
-	bool reset_required = false;
-	bool promisc_change = false;
-	int ret;
+	u64 changed_flags;
+	u32 i, j;
 
-	/* NOTE: MFP is not settable */
+	changed_flags = pf->flags;
 
-	if (flags & I40E_PRIV_FLAGS_LINKPOLL_FLAG)
-		pf->flags |= I40E_FLAG_LINK_POLLING_ENABLED;
-	else
-		pf->flags &= ~I40E_FLAG_LINK_POLLING_ENABLED;
+	for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
+		const struct i40e_priv_flags *priv_flags;
 
-	/* allow the user to control the state of the Flow
-	 * Director ATR (Application Targeted Routing) feature
-	 * of the driver
-	 */
-	if (flags & I40E_PRIV_FLAGS_FD_ATR) {
-		pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
-	} else {
-		pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
-		pf->hw_disabled_flags |= I40E_FLAG_FD_ATR_ENABLED;
+		priv_flags = &i40e_gstrings_priv_flags[i];
 
-		/* flush current ATR settings */
-		set_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
+		if (priv_flags->read_only)
+			continue;
+
+		if (flags & BIT(i))
+			pf->flags |= priv_flags->flag;
+		else
+			pf->flags &= ~(priv_flags->flag);
 	}
 
-	if ((flags & I40E_PRIV_FLAGS_VEB_STATS) &&
-	    !(pf->flags & I40E_FLAG_VEB_STATS_ENABLED)) {
-		pf->flags |= I40E_FLAG_VEB_STATS_ENABLED;
-		reset_required = true;
-	} else if (!(flags & I40E_PRIV_FLAGS_VEB_STATS) &&
-		   (pf->flags & I40E_FLAG_VEB_STATS_ENABLED)) {
-		pf->flags &= ~I40E_FLAG_VEB_STATS_ENABLED;
-		reset_required = true;
+	if (pf->hw.pf_id != 0)
+		goto flags_complete;
+
+	for (j = 0; j < I40E_GL_PRIV_FLAGS_STR_LEN; j++) {
+		const struct i40e_priv_flags *priv_flags;
+
+		priv_flags = &i40e_gl_gstrings_priv_flags[j];
+
+		if (priv_flags->read_only)
+			continue;
+
+		if (flags & BIT(i + j))
+			pf->flags |= priv_flags->flag;
+		else
+			pf->flags &= ~(priv_flags->flag);
 	}
 
-	if (pf->hw.pf_id == 0) {
-		if ((flags & I40E_PRIV_FLAGS_TRUE_PROMISC_SUPPORT) &&
-		    !(pf->flags & I40E_FLAG_TRUE_PROMISC_SUPPORT)) {
-			pf->flags |= I40E_FLAG_TRUE_PROMISC_SUPPORT;
-			promisc_change = true;
-		} else if (!(flags & I40E_PRIV_FLAGS_TRUE_PROMISC_SUPPORT) &&
-			   (pf->flags & I40E_FLAG_TRUE_PROMISC_SUPPORT)) {
-			pf->flags &= ~I40E_FLAG_TRUE_PROMISC_SUPPORT;
-			promisc_change = true;
-		}
+flags_complete:
+	changed_flags ^= pf->flags;
+
+	/* Process any additional changes needed as a result of flag changes.
+	 * The changed_flags value reflects the list of bits that were
+	 * changed in the code above.
+	 */
+
+	/* Flush current ATR settings if ATR was disabled */
+	if ((changed_flags & I40E_FLAG_FD_ATR_ENABLED) &&
+	    !(pf->flags & I40E_FLAG_FD_ATR_ENABLED)) {
+		pf->hw_disabled_flags |= I40E_FLAG_FD_ATR_ENABLED;
+		set_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
 	}
-	if (promisc_change) {
+
+	/* Only allow ATR evict on hardware that is capable of handling it */
+	if (pf->hw_disabled_flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE)
+		pf->flags &= ~I40E_FLAG_HW_ATR_EVICT_CAPABLE;
+
+	if (changed_flags & I40E_FLAG_TRUE_PROMISC_SUPPORT) {
+		u16 sw_flags = 0, valid_flags = 0;
+		int ret;
+
 		if (!(pf->flags & I40E_FLAG_TRUE_PROMISC_SUPPORT))
 			sw_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
 		valid_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
@@ -4046,14 +4085,10 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 		}
 	}
 
-	if ((flags & I40E_PRIV_FLAGS_HW_ATR_EVICT) &&
-	    (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE))
-		pf->hw_disabled_flags &= ~I40E_FLAG_HW_ATR_EVICT_CAPABLE;
-	else
-		pf->hw_disabled_flags |= I40E_FLAG_HW_ATR_EVICT_CAPABLE;
-
-	/* if needed, issue reset to cause things to take effect */
-	if (reset_required)
+	/* Issue reset to cause things to take effect, as additional bits
+	 * are added we will need to create a mask of bits requiring reset
+	 */
+	if (changed_flags & I40E_FLAG_VEB_STATS_ENABLED)
 		i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED));
 
 	return 0;
-- 
2.4.11

[Intel-wired-lan] [next PATCH S62 2/6] i40e: Clean up handling of private flags

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On
> Behalf Of Bimmy Pujari
> Sent: Friday, March 10, 2017 12:22 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [next PATCH S62 2/6] i40e: Clean up handling of
> private flags
> 
> From: Alexander Duyck <alexander.h.duyck@intel.com>
> 
> This patch cleans up and addresses several issues in the way that i40e
> handles private flags. Previously the code was choosing fixed bits and trying
> to match them up with strings in a somewhat haphazard way. This resulted in
> the possibility for adding a new bit and causing a mismatch as the private
> flags are linear bits starting at 0, and the private flags in the driver were split
> up over a group specific to the PF and a group that was global.
> 
> What this change does is define an array of structs used to represent the
> private flags. Contained within the structs are the bits necessary to know
> which flags to set and/or clear depending on the state of the bit. By doing
> this we can add new bits in the future with minimal overhead and avoid
> creating possible mis-matches should we need to remove a flag based on
> compile options.
> 
> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
> Change-ID: Ia3214ab04f0ab2f70354ac0997a135f1d01b0acd
> ---
>  drivers/net/ethernet/intel/i40e/i40e.h         |   8 --
>  drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 189 +++++++++++++++----
> ------
>  2 files changed, 112 insertions(+), 85 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [next PATCH S62 3/6] i40e: use register for XL722 control register read/write

[Bimmy Pujari]

From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>

The XL722 doesn't support the AQ command to read/write the control
register so enable it to bypass the check and use the direct read/write
method.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Change-ID: Iefecc737b57207485c90845af5989d5af518bf16
---
 drivers/net/ethernet/intel/i40e/i40e_common.c   | 8 ++++++--
 drivers/net/ethernet/intel/i40evf/i40e_common.c | 8 ++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 95946f4..f9db95a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -4963,7 +4963,9 @@ u32 i40e_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr)
 	int retry = 5;
 	u32 val = 0;
 
-	use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
+	use_register = (((hw->aq.api_maj_ver == 1) &&
+			(hw->aq.api_min_ver < 5)) ||
+			(hw->mac.type == I40E_MAC_X722));
 	if (!use_register) {
 do_retry:
 		status = i40e_aq_rx_ctl_read_register(hw, reg_addr, &val, NULL);
@@ -5022,7 +5024,9 @@ void i40e_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val)
 	bool use_register;
 	int retry = 5;
 
-	use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
+	use_register = (((hw->aq.api_maj_ver == 1) &&
+			(hw->aq.api_min_ver < 5)) ||
+			(hw->mac.type == I40E_MAC_X722));
 	if (!use_register) {
 do_retry:
 		status = i40e_aq_rx_ctl_write_register(hw, reg_addr,
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_common.c b/drivers/net/ethernet/intel/i40evf/i40e_common.c
index 89dfdbc..626fbf1 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_common.c
@@ -958,7 +958,9 @@ u32 i40evf_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr)
 	int retry = 5;
 	u32 val = 0;
 
-	use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
+	use_register = (((hw->aq.api_maj_ver == 1) &&
+			(hw->aq.api_min_ver < 5)) ||
+			(hw->mac.type == I40E_MAC_X722));
 	if (!use_register) {
 do_retry:
 		status = i40evf_aq_rx_ctl_read_register(hw, reg_addr,
@@ -1019,7 +1021,9 @@ void i40evf_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val)
 	bool use_register;
 	int retry = 5;
 
-	use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
+	use_register = (((hw->aq.api_maj_ver == 1) &&
+			(hw->aq.api_min_ver < 5)) ||
+			(hw->mac.type == I40E_MAC_X722));
 	if (!use_register) {
 do_retry:
 		status = i40evf_aq_rx_ctl_write_register(hw, reg_addr,
-- 
2.4.11

[Intel-wired-lan] [next PATCH S62 3/6] i40e: use register for XL722 control register read/write

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On
> Behalf Of Bimmy Pujari
> Sent: Friday, March 10, 2017 12:22 PM
> To: intel-wired-lan at lists.osuosl.org
> Cc: Stillwell Jr, Paul M <paul.m.stillwell.jr@intel.com>
> Subject: [Intel-wired-lan] [next PATCH S62 3/6] i40e: use register for XL722
> control register read/write
> 
> From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
> 
> The XL722 doesn't support the AQ command to read/write the control
> register so enable it to bypass the check and use the direct read/write
> method.
> 
> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
> Change-ID: Iefecc737b57207485c90845af5989d5af518bf16
> ---
>  drivers/net/ethernet/intel/i40e/i40e_common.c   | 8 ++++++--
>  drivers/net/ethernet/intel/i40evf/i40e_common.c | 8 ++++++--
>  2 files changed, 12 insertions(+), 4 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [next PATCH S62 4/6] i40e: Check for new arq elements before leaving the adminq subtask loop

[Bimmy Pujari]

From: "Christopher Bednarz" <christopher.n.bednarz@intel.com>

Fix a case where we miss an arq element if a new one is added before we
enable interrupts and exit the arq subtask loop. This occurs frequently
with Rdma running on Windows VF and causes long delays that prevent SMB
from establishing connections.

Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com>
Change-ID: I3e1c8b2b960c12857d9b8275bea2c1563674392e
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 804f41a..bab9337 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6524,9 +6524,11 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
 				 opcode);
 			break;
 		}
-	} while (pending && (i++ < pf->adminq_work_limit));
+	} while (i++ < pf->adminq_work_limit);
+
+	if (i < pf->adminq_work_limit)
+		clear_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
 
-	clear_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
 	/* re-enable Admin queue interrupt cause */
 	val = rd32(hw, I40E_PFINT_ICR0_ENA);
 	val |=  I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
-- 
2.4.11

[Intel-wired-lan] [next PATCH S62 4/6] i40e: Check for new arq elements before leaving the adminq subtask loop

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On
> Behalf Of Bimmy Pujari
> Sent: Friday, March 10, 2017 12:22 PM
> To: intel-wired-lan at lists.osuosl.org
> Cc: Bednarz, Christopher N <christopher.n.bednarz@intel.com>
> Subject: [Intel-wired-lan] [next PATCH S62 4/6] i40e: Check for new arq
> elements before leaving the adminq subtask loop
> 
> From: "Christopher Bednarz" <christopher.n.bednarz@intel.com>
> 
> Fix a case where we miss an arq element if a new one is added before we
> enable interrupts and exit the arq subtask loop. This occurs frequently with
> Rdma running on Windows VF and causes long delays that prevent SMB from
> establishing connections.
> 
> Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com>
> Change-ID: I3e1c8b2b960c12857d9b8275bea2c1563674392e
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)


Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [next PATCH S62 5/6] i40e: remove a useless goto statement

[Bimmy Pujari]

From: Jacob Keller <jacob.e.keller@intel.com>

The goto found here for when in MFP mode is pointless. It jumps to the
end of a series of if blocks. However, right after this statement is
a closing '}' for this if block, which will result in the program flow
going to the exact same location as the goto statement indicates. Thus,
regardless of whether we are in MFP mode, the program flow will resume
from the same location.

This arose due to various refactoring which did not notice that this
goto became essentially a no-op.

To properly understand this diff you will need to view a larger context
than is given by default.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Change-ID: I088f73c3831aa5c4e2281380c7a3ce605594300c
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index bab9337..4cfe9491 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5175,10 +5175,6 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
 		    (hw->dcbx_status == I40E_DCBX_STATUS_DISABLED)) {
 			dev_info(&pf->pdev->dev,
 				 "DCBX offload is not supported or is disabled for this PF.\n");
-
-			if (pf->flags & I40E_FLAG_MFP_ENABLED)
-				goto out;
-
 		} else {
 			/* When status is not DISABLED then DCBX in FW */
 			pf->dcbx_cap = DCB_CAP_DCBX_LLD_MANAGED |
-- 
2.4.11

[Intel-wired-lan] [next PATCH S62 5/6] i40e: remove a useless goto statement

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On
> Behalf Of Bimmy Pujari
> Sent: Friday, March 10, 2017 12:22 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [next PATCH S62 5/6] i40e: remove a useless goto
> statement
> 
> From: Jacob Keller <jacob.e.keller@intel.com>
> 
> The goto found here for when in MFP mode is pointless. It jumps to the end
> of a series of if blocks. However, right after this statement is a closing '}' for
> this if block, which will result in the program flow going to the exact same
> location as the goto statement indicates. Thus, regardless of whether we are
> in MFP mode, the program flow will resume from the same location.
> 
> This arose due to various refactoring which did not notice that this goto
> became essentially a no-op.
> 
> To properly understand this diff you will need to view a larger context than is
> given by default.
> 
> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
> Change-ID: I088f73c3831aa5c4e2281380c7a3ce605594300c
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ----
>  1 file changed, 4 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [next PATCH S62 6/6] i40e: remove FDIR_REQUIRES_REINIT driver flag

[Bimmy Pujari]

From: Jacob Keller <jacob.e.keller@intel.com>

This flag hasn't been used since commit 1e1be8f622ee ("i40e: ATR policy
change to flush the table to clean stale ATR rules").

Lets simplify things and just remove it.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Change-ID: I76279d84db8a2fd96f445b96aa413059f9256879
---
 drivers/net/ethernet/intel/i40e/i40e.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index e324b6f..dcba258 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -389,7 +389,6 @@ struct i40e_pf {
 #define I40E_FLAG_MSIX_ENABLED			BIT_ULL(3)
 #define I40E_FLAG_RSS_ENABLED			BIT_ULL(6)
 #define I40E_FLAG_VMDQ_ENABLED			BIT_ULL(7)
-#define I40E_FLAG_FDIR_REQUIRES_REINIT		BIT_ULL(8)
 #define I40E_FLAG_NEED_LINK_UPDATE		BIT_ULL(9)
 #define I40E_FLAG_IWARP_ENABLED			BIT_ULL(10)
 #define I40E_FLAG_CLEAN_ADMINQ			BIT_ULL(14)
-- 
2.4.11

[Intel-wired-lan] [next PATCH S62 6/6] i40e: remove FDIR_REQUIRES_REINIT driver flag

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On
> Behalf Of Bimmy Pujari
> Sent: Friday, March 10, 2017 12:22 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [next PATCH S62 6/6] i40e: remove
> FDIR_REQUIRES_REINIT driver flag
> 
> From: Jacob Keller <jacob.e.keller@intel.com>
> 
> This flag hasn't been used since commit 1e1be8f622ee ("i40e: ATR policy
> change to flush the table to clean stale ATR rules").
> 
> Lets simplify things and just remove it.
> 
> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
> Change-ID: I76279d84db8a2fd96f445b96aa413059f9256879
> ---
>  drivers/net/ethernet/intel/i40e/i40e.h | 1 -
>  1 file changed, 1 deletion(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>