From: Dinh Nguyen <dinguyen@kernel.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v11 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Date: Tue, 5 Mar 2019 22:11:38 -0600 [thread overview]
Message-ID: <2c28371f-ed08-13b7-6f1f-46a94e98440a@kernel.org> (raw)
In-Reply-To: <20190305162310.1396-7-tien.fong.chee@intel.com>
On 3/5/19 10:23 AM, tien.fong.chee at intel.com wrote:
> From: Tien Fong Chee <tien.fong.chee@intel.com>
>
> Update the default configuration file to enable the necessary functionality
> to get the SoCFPGA loadfs driver support. This would enable the
> implementation of programming bitstream into FPGA from MMC.
>
> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
>
> ---
>
> changes for v8
> - Added FIT related configs
>
> changes for v7
> - Removed limit set for CONFIG_FS_FAT_MAX_CLUSTSIZE
> ---
> configs/socfpga_arria10_defconfig | 8 ++++++++
> 1 file changed, 8 insertions(+)
What changed in v9 - v11?
Also this patch doesn't apply to v2019.04-rc4 at all:
error: patch failed: configs/socfpga_arria10_defconfig:27
error: configs/socfpga_arria10_defconfig: patch does not apply
dinguyen at b13cycling:~/linux_dev/u-boot$ git apply --reject patch1.patch
Checking patch configs/socfpga_arria10_defconfig...
error: while searching for:
# CONFIG_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_FS_FAT=y
CONFIG_FPGA_SOCFPGA=y
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_MMC=y
error: patch failed: configs/socfpga_arria10_defconfig:27
Applying patch configs/socfpga_arria10_defconfig with 1 reject...
Rejected hunk #1.
Dinh
next prev parent reply other threads:[~2019-03-06 4:11 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-05 16:23 [U-Boot] [PATCH v11 0/9] Add support for loading FPGA bitstream tien.fong.chee at intel.com
2019-03-05 16:23 ` [U-Boot] [PATCH v11 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10 tien.fong.chee at intel.com
2019-03-05 19:12 ` Dinh Nguyen
2019-03-07 7:51 ` Chee, Tien Fong
2019-03-07 8:18 ` Marek Vasut
2019-03-07 8:30 ` Chee, Tien Fong
2019-03-07 8:38 ` Marek Vasut
2019-03-07 8:56 ` Chee, Tien Fong
2019-03-05 16:23 ` [U-Boot] [PATCH v11 2/9] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK tien.fong.chee at intel.com
2019-03-05 16:23 ` [U-Boot] [PATCH v11 3/9] ARM: socfpga: Cleaning up the messages tien.fong.chee at intel.com
2019-03-06 4:31 ` Dinh Nguyen
2019-03-07 7:57 ` Chee, Tien Fong
2019-03-05 16:23 ` [U-Boot] [PATCH v11 4/9] ARM: socfpga: Move the watchdog reset to the looping location tien.fong.chee at intel.com
2019-03-06 4:35 ` Dinh Nguyen
2019-03-07 8:04 ` Chee, Tien Fong
2019-03-05 16:23 ` [U-Boot] [PATCH v11 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading tien.fong.chee at intel.com
2019-03-05 16:23 ` [U-Boot] [PATCH v11 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK tien.fong.chee at intel.com
2019-03-06 4:11 ` Dinh Nguyen [this message]
2019-03-07 8:06 ` Chee, Tien Fong
2019-03-05 16:23 ` [U-Boot] [PATCH v11 7/9] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs tien.fong.chee at intel.com
2019-03-05 16:23 ` [U-Boot] [PATCH v11 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK tien.fong.chee at intel.com
2019-03-06 4:54 ` Dinh Nguyen
2019-03-07 8:14 ` Chee, Tien Fong
2019-03-05 16:23 ` [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL tien.fong.chee at intel.com
2019-03-05 20:05 ` Simon Goldschmidt
2019-03-06 2:04 ` Chee, Tien Fong
2019-03-07 7:07 ` Chee, Tien Fong
2019-03-07 8:10 ` Simon Goldschmidt
2019-03-07 8:32 ` Chee, Tien Fong
2019-03-06 4:52 ` Dinh Nguyen
2019-03-07 8:24 ` Chee, Tien Fong
2019-03-07 15:33 ` Dinh Nguyen
2019-03-08 4:36 ` Chee, Tien Fong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2c28371f-ed08-13b7-6f1f-46a94e98440a@kernel.org \
--to=dinguyen@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.