All of lore.kernel.org
 help / color / mirror / Atom feed
From: Giulio Benetti <giulio.benetti@micronovasrl.com>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>,
	David Airlie <airlied@linux.ie>,
	Thierry Reding <thierry.reding@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	devicetree <devicetree@vger.kernel.org>,
	Jonathan Liu <net147@gmail.com>
Subject: Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
Date: Thu, 19 Apr 2018 15:15:13 +0200	[thread overview]
Message-ID: <3341fcae-2146-b3b4-be41-b7e5167c2147@micronovasrl.com> (raw)
In-Reply-To: <CAGb2v65tH_8_J27Xmx4TeEYhpHLJf4m0AzXJoGXZYMfJH=51xQ@mail.gmail.com>

Hi,

Il 19/04/2018 14:45, Chen-Yu Tsai ha scritto:
> On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
> <giulio.benetti@micronovasrl.com> wrote:
>> Hi,
>>
>> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>>
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>
>>
>> Judging from the code, the real vendor should be CDTech.
>> Take a look at their website:
>> http://www.cdtech-lcd.com/en/standardscreen.html
>>
>> I point you my patch for inserting another similar panel:
>> https://patchwork.freedesktop.org/patch/211914/
>>
>> Maybe it would make sense to use CDTech as the vendor,
>> because maybe Bananapi resells only it.
>> Or maybe it is a custom panel done for them,
>> but the same is for other panels I've submitted patches.
>> Micronova srl custom, but vendor is CDTech.
>>
>> What do you think?
> 
> That might be true. But for people without access to the vendors,
> this is horribly hard to figure out. People are only going to look
> at whatever marking there is on the LCD panel, and whatever the
> seller says. This panel has the model number stickered on, but the
> PCB attached to it only has the Banana Pi logo.

Ah ok, my fault, I didn't see it has a PCB attached with Banana Pi logo.
Also it makes a lot of sense what you say about people looking for display.

> 
> And given it's a custom piece, probably OEM or ODM, the real
> manufacturer matters less. You don't mention "Foxconn" as the
> vendor of the iPhone, do you?

:) that's right.

Best regards

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> ChenYu
> 
>>
>> --
>> Giulio Benetti
>> CTO
>>
>> MICRONOVA SRL
>> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
>> Tel. 049/8931563 - Fax 049/8931346
>> Cod.Fiscale - P.IVA 02663420285
>> Capitale Sociale € 26.000 i.v.
>> Iscritta al Reg. Imprese di Padova N. 02663420285
>> Numero R.E.A. 258642
>>
>>
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>    .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>    drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>    2 files changed, 32 insertions(+)
>>>    create mode 100644
>>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is
>>> specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>>> b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>          },
>>>    };
>>>    +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> +       .clock = 30000,
>>> +       .hdisplay = 800,
>>> +       .hsync_start = 800 + 40,
>>> +       .hsync_end = 800 + 40 + 48,
>>> +       .htotal = 800 + 40 + 48 + 40,
>>> +       .vdisplay = 480,
>>> +       .vsync_start = 480 + 13,
>>> +       .vsync_end = 480 + 13 + 3,
>>> +       .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>> +       .num_modes = 1,
>>> +       .bpc = 6,
>>> +       .size = {
>>> +               .width = 154,
>>> +               .height = 86,
>>> +       },
>>> +};
>>> +
>>>    static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>>          {
>>>                  .clock = 71900,
>>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>>> = {
>>>          }, {
>>>                  .compatible = "avic,tm070ddh03",
>>>                  .data = &avic_tm070ddh03,
>>> +       }, {
>>> +               .compatible = "bananapi,s070wv20-ct16",
>>> +               .data = &bananapi_s070wv20_ct16,
>>>          }, {
>>>                  .compatible = "boe,nv101wxmn51",
>>>                  .data = &boe_nv101wxmn51,
>>>
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

WARNING: multiple messages have this Message-ID (diff)
From: Giulio Benetti <giulio.benetti@micronovasrl.com>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree <devicetree@vger.kernel.org>,
	Jonathan Liu <net147@gmail.com>, Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	David Airlie <airlied@linux.ie>,
	Thierry Reding <thierry.reding@gmail.com>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
Date: Thu, 19 Apr 2018 15:15:13 +0200	[thread overview]
Message-ID: <3341fcae-2146-b3b4-be41-b7e5167c2147@micronovasrl.com> (raw)
In-Reply-To: <CAGb2v65tH_8_J27Xmx4TeEYhpHLJf4m0AzXJoGXZYMfJH=51xQ@mail.gmail.com>

Hi,

Il 19/04/2018 14:45, Chen-Yu Tsai ha scritto:
> On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
> <giulio.benetti@micronovasrl.com> wrote:
>> Hi,
>>
>> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>>
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>
>>
>> Judging from the code, the real vendor should be CDTech.
>> Take a look at their website:
>> http://www.cdtech-lcd.com/en/standardscreen.html
>>
>> I point you my patch for inserting another similar panel:
>> https://patchwork.freedesktop.org/patch/211914/
>>
>> Maybe it would make sense to use CDTech as the vendor,
>> because maybe Bananapi resells only it.
>> Or maybe it is a custom panel done for them,
>> but the same is for other panels I've submitted patches.
>> Micronova srl custom, but vendor is CDTech.
>>
>> What do you think?
> 
> That might be true. But for people without access to the vendors,
> this is horribly hard to figure out. People are only going to look
> at whatever marking there is on the LCD panel, and whatever the
> seller says. This panel has the model number stickered on, but the
> PCB attached to it only has the Banana Pi logo.

Ah ok, my fault, I didn't see it has a PCB attached with Banana Pi logo.
Also it makes a lot of sense what you say about people looking for display.

> 
> And given it's a custom piece, probably OEM or ODM, the real
> manufacturer matters less. You don't mention "Foxconn" as the
> vendor of the iPhone, do you?

:) that's right.

Best regards

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> ChenYu
> 
>>
>> --
>> Giulio Benetti
>> CTO
>>
>> MICRONOVA SRL
>> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
>> Tel. 049/8931563 - Fax 049/8931346
>> Cod.Fiscale - P.IVA 02663420285
>> Capitale Sociale € 26.000 i.v.
>> Iscritta al Reg. Imprese di Padova N. 02663420285
>> Numero R.E.A. 258642
>>
>>
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>    .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>    drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>    2 files changed, 32 insertions(+)
>>>    create mode 100644
>>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is
>>> specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>>> b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>          },
>>>    };
>>>    +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> +       .clock = 30000,
>>> +       .hdisplay = 800,
>>> +       .hsync_start = 800 + 40,
>>> +       .hsync_end = 800 + 40 + 48,
>>> +       .htotal = 800 + 40 + 48 + 40,
>>> +       .vdisplay = 480,
>>> +       .vsync_start = 480 + 13,
>>> +       .vsync_end = 480 + 13 + 3,
>>> +       .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>> +       .num_modes = 1,
>>> +       .bpc = 6,
>>> +       .size = {
>>> +               .width = 154,
>>> +               .height = 86,
>>> +       },
>>> +};
>>> +
>>>    static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>>          {
>>>                  .clock = 71900,
>>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>>> = {
>>>          }, {
>>>                  .compatible = "avic,tm070ddh03",
>>>                  .data = &avic_tm070ddh03,
>>> +       }, {
>>> +               .compatible = "bananapi,s070wv20-ct16",
>>> +               .data = &bananapi_s070wv20_ct16,
>>>          }, {
>>>                  .compatible = "boe,nv101wxmn51",
>>>                  .data = &boe_nv101wxmn51,
>>>
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: giulio.benetti@micronovasrl.com (Giulio Benetti)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
Date: Thu, 19 Apr 2018 15:15:13 +0200	[thread overview]
Message-ID: <3341fcae-2146-b3b4-be41-b7e5167c2147@micronovasrl.com> (raw)
In-Reply-To: <CAGb2v65tH_8_J27Xmx4TeEYhpHLJf4m0AzXJoGXZYMfJH=51xQ@mail.gmail.com>

Hi,

Il 19/04/2018 14:45, Chen-Yu Tsai ha scritto:
> On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
> <giulio.benetti@micronovasrl.com> wrote:
>> Hi,
>>
>> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>>
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>
>>
>> Judging from the code, the real vendor should be CDTech.
>> Take a look at their website:
>> http://www.cdtech-lcd.com/en/standardscreen.html
>>
>> I point you my patch for inserting another similar panel:
>> https://patchwork.freedesktop.org/patch/211914/
>>
>> Maybe it would make sense to use CDTech as the vendor,
>> because maybe Bananapi resells only it.
>> Or maybe it is a custom panel done for them,
>> but the same is for other panels I've submitted patches.
>> Micronova srl custom, but vendor is CDTech.
>>
>> What do you think?
> 
> That might be true. But for people without access to the vendors,
> this is horribly hard to figure out. People are only going to look
> at whatever marking there is on the LCD panel, and whatever the
> seller says. This panel has the model number stickered on, but the
> PCB attached to it only has the Banana Pi logo.

Ah ok, my fault, I didn't see it has a PCB attached with Banana Pi logo.
Also it makes a lot of sense what you say about people looking for display.

> 
> And given it's a custom piece, probably OEM or ODM, the real
> manufacturer matters less. You don't mention "Foxconn" as the
> vendor of the iPhone, do you?

:) that's right.

Best regards

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale ? 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> ChenYu
> 
>>
>> --
>> Giulio Benetti
>> CTO
>>
>> MICRONOVA SRL
>> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
>> Tel. 049/8931563 - Fax 049/8931346
>> Cod.Fiscale - P.IVA 02663420285
>> Capitale Sociale ? 26.000 i.v.
>> Iscritta al Reg. Imprese di Padova N. 02663420285
>> Numero R.E.A. 258642
>>
>>
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>    .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>    drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>    2 files changed, 32 insertions(+)
>>>    create mode 100644
>>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is
>>> specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>>> b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>          },
>>>    };
>>>    +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> +       .clock = 30000,
>>> +       .hdisplay = 800,
>>> +       .hsync_start = 800 + 40,
>>> +       .hsync_end = 800 + 40 + 48,
>>> +       .htotal = 800 + 40 + 48 + 40,
>>> +       .vdisplay = 480,
>>> +       .vsync_start = 480 + 13,
>>> +       .vsync_end = 480 + 13 + 3,
>>> +       .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>> +       .num_modes = 1,
>>> +       .bpc = 6,
>>> +       .size = {
>>> +               .width = 154,
>>> +               .height = 86,
>>> +       },
>>> +};
>>> +
>>>    static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>>          {
>>>                  .clock = 71900,
>>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>>> = {
>>>          }, {
>>>                  .compatible = "avic,tm070ddh03",
>>>                  .data = &avic_tm070ddh03,
>>> +       }, {
>>> +               .compatible = "bananapi,s070wv20-ct16",
>>> +               .data = &bananapi_s070wv20_ct16,
>>>          }, {
>>>                  .compatible = "boe,nv101wxmn51",
>>>                  .data = &boe_nv101wxmn51,
>>>
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

  reply	other threads:[~2018-04-19 13:15 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-19  9:32 [PATCH 0/6] drm/sun4i: Support color dithering for LCD panels Chen-Yu Tsai
2018-04-19  9:32 ` Chen-Yu Tsai
2018-04-19  9:32 ` Chen-Yu Tsai
2018-04-19  9:32 ` [PATCH 1/6] drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-04-19  9:32 ` [PATCH 2/6] drm/sun4i: tcon: Rename Dithering related register macros Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-04-19  9:32 ` [PATCH 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-04-19 13:31   ` Maxime Ripard
2018-04-19 13:31     ` Maxime Ripard
2018-04-19 13:31     ` Maxime Ripard
2018-04-19  9:32 ` [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-04-19 12:31   ` Giulio Benetti
2018-04-19 12:31     ` Giulio Benetti
2018-04-19 12:31     ` Giulio Benetti
2018-04-19 12:45     ` Chen-Yu Tsai
2018-04-19 12:45       ` Chen-Yu Tsai
2018-04-19 12:45       ` Chen-Yu Tsai
2018-04-19 13:15       ` Giulio Benetti [this message]
2018-04-19 13:15         ` Giulio Benetti
2018-04-19 13:15         ` Giulio Benetti
2018-04-24 16:42   ` Rob Herring
2018-04-24 16:42     ` Rob Herring
2018-04-24 16:42     ` Rob Herring
2018-05-14 18:03   ` Jagan Teki
2018-05-14 18:03     ` Jagan Teki
2018-05-16  6:42     ` Chen-Yu Tsai
2018-05-16  6:42       ` Chen-Yu Tsai
2018-05-16  6:42       ` Chen-Yu Tsai
2018-05-16  7:20       ` Jagan Teki
2018-05-16  7:20         ` Jagan Teki
2018-05-16  7:56         ` Chen-Yu Tsai
2018-05-16  7:56           ` Chen-Yu Tsai
2018-05-16  7:56           ` Chen-Yu Tsai
2018-04-19  9:32 ` [PATCH 5/6] ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0 Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-04-19  9:32 ` [PATCH 6/6] [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7" 800x480 RGB LCD panel Chen-Yu Tsai
2018-04-19  9:32   ` Chen-Yu Tsai
2018-09-05 13:24 ` [PATCH 0/6] drm/sun4i: Support color dithering for LCD panels Jagan Teki
2018-09-05 13:24   ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3341fcae-2146-b3b4-be41-b7e5167c2147@micronovasrl.com \
    --to=giulio.benetti@micronovasrl.com \
    --cc=airlied@linux.ie \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=net147@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.