From: Roman Bacik <roman.bacik@broadcom.com>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc: U-Boot Mailing List <u-boot@lists.denx.de>,
Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>,
Bharat Gooty <bharat.gooty@broadcom.com>,
Vignesh R <vigneshr@ti.com>
Subject: RE: [PATCH v4] driver: spi: add bcm iproc qspi support.
Date: Tue, 2 Nov 2021 09:43:53 -0700 [thread overview]
Message-ID: <33968fa0b65debf4cfaa80404298a25e@mail.gmail.com> (raw)
In-Reply-To: <CAMty3ZBV_S30sEk+FTyRbvMcRG5gg0+Mta4zF4AO6qgJHuoJRg@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3976 bytes --]
Hi Jagan,
> -----Original Message-----
> From: Jagan Teki <jagan@amarulasolutions.com>
> Sent: Monday, November 1, 2021 10:07 PM
> To: Roman Bacik <roman.bacik@broadcom.com>
> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Rayagonda Kokatanur
> <rayagonda.kokatanur@broadcom.com>; Bharat Gooty
> <bharat.gooty@broadcom.com>; Vignesh R <vigneshr@ti.com>
> Subject: Re: [PATCH v4] driver: spi: add bcm iproc qspi support.
>
> On Tue, Nov 2, 2021 at 4:57 AM Roman Bacik <roman.bacik@broadcom.com>
> wrote:
> >
> > Hi Jagan,
> >
> > On Mon, Nov 1, 2021 at 12:12 AM Jagan Teki
> <jagan@amarulasolutions.com> wrote:
> > >
> > > On Tue, Oct 26, 2021 at 1:07 AM Roman Bacik
> <roman.bacik@broadcom.com> wrote:
> > > >
> > > > From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> > > >
> > > > IPROC qspi driver supports both BSPI and MSPI modes.
> > > >
> > > > Signed-off-by: Rayagonda Kokatanur
> <rayagonda.kokatanur@broadcom.com>
> > > > Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
> > > > Acked-by: Rayagonda Kokatanur
> <rayagonda.kokatanur@broadcom.com>
> > > >
> > > > Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
> > > > ---
> > > >
> > > > Changes in v4:
> > > > - move iproc_qspi.c from spi to mtd/spi
> > > > - remove iproc_qspi.h
> > > > - rename IPROC_QSPI to SPI_FLASH_IPROC
> > > >
> > > > Changes in v3:
> > > > - fix warning by including linux/delay.h
> > > > - change ofdata_to_platdata to of_to_plat
> > > > - change priv_auto_alloc_size to priv_auto
> > > >
> > > > Changes in v2:
> > > > - remove include spi-nor.h
> > > > - define and use named BITs for writing register values
> > > > - remove bspi_set_4byte_mode() method
> > > >
> > > > drivers/mtd/spi/Kconfig | 6 +
> > > > drivers/mtd/spi/Makefile | 1 +
> > > > drivers/mtd/spi/iproc_qspi.c | 718
> +++++++++++++++++++++++++++++++++++
> > > > 3 files changed, 725 insertions(+)
> > > > create mode 100644 drivers/mtd/spi/iproc_qspi.c
> > >
> > > Look like you confused what I've mentioned before, your driver is
> > > flash specific so add a driver in UCLASS_SPI_FLASH. drivers with
> > > UCLASS_SPI to be in drivers/spi/
> > >
> > > Jagan.
> >
> > This is a controller driver and it is currently meant to be used as
> > follows:
> >
> > qspi: spi@370000 {
> > compatible = "brcm,iproc-qspi";
> > reg = <0x00370000 0x100>,
> > <0x00370100 0x100>,
> > <0x00370200 0x200>;
> > reg-names = "bspi", "bspi_raf", "mspi";
> > flash-iomap-addr = /bits/ 64 <0x70000000>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > spi_nor_flash: spi_flash@0 {
> > compatible = "jedec,spi-nor";
> > reg = <0>;
> > spi-max-frequency = <12500000>;
> > spi-cpol;
> > spi-cpha;
> > spi-tx-bus-width = <1>;
> > spi-rx-bus-width = <4>;
> > };
> > };
>
> Does this binding is from Linux? if yes please share Linux driver.
>
> Jagan.
Here is Linux binding document:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
And here is Linux driver:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-bcm-qspi.c
Thanks,
Roman
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4206 bytes --]
prev parent reply other threads:[~2021-11-02 16:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-25 19:36 [PATCH v4] driver: spi: add bcm iproc qspi support Roman Bacik
2021-11-01 7:12 ` Jagan Teki
2021-11-01 23:27 ` Roman Bacik
2021-11-02 5:06 ` Jagan Teki
2021-11-02 16:43 ` Roman Bacik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=33968fa0b65debf4cfaa80404298a25e@mail.gmail.com \
--to=roman.bacik@broadcom.com \
--cc=bharat.gooty@broadcom.com \
--cc=jagan@amarulasolutions.com \
--cc=rayagonda.kokatanur@broadcom.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.