* Help with configuring Yocto with an external toolchain except "csl"
@ 2012-06-19 9:06 jojo
2012-06-20 5:47 ` Khem Raj
0 siblings, 1 reply; 4+ messages in thread
From: jojo @ 2012-06-19 9:06 UTC (permalink / raw)
To: poky
@all,
I google some information about this topic and then,
i found the case is that jut support "CodeSourcery labs" toolchain.
I think my external toolchain is not standard of directory like "tcmode-externl-csl".
I can use "buildroot" to use this toolchian that just use three variables following :
BR2_TOOLCHAIN_EXTERNAL_PREFIX
BR2_TOOLCHAIN_EXTERNAL_PATH
BR2_TOOLCHAIN_EXTERNAL_SYSROOT_PATH
so there are some solution in poky ? thanks for you attention :)
B.R.
-- jojo
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Help with configuring Yocto with an external toolchain except "csl"
2012-06-19 9:06 Help with configuring Yocto with an external toolchain except "csl" jojo
@ 2012-06-20 5:47 ` Khem Raj
2012-06-21 1:46 ` jojo
0 siblings, 1 reply; 4+ messages in thread
From: Khem Raj @ 2012-06-20 5:47 UTC (permalink / raw)
To: jojo; +Cc: poky
On Tue, Jun 19, 2012 at 2:06 AM, jojo <rjiejie@gmail.com> wrote:
> @all,
> I google some information about this topic and then,
> i found the case is that jut support "CodeSourcery labs" toolchain.
>
> I think my external toolchain is not standard of directory like "tcmode-externl-csl".
> I can use "buildroot" to use this toolchian that just use three variables following :
> BR2_TOOLCHAIN_EXTERNAL_PREFIX
> BR2_TOOLCHAIN_EXTERNAL_PATH
> BR2_TOOLCHAIN_EXTERNAL_SYSROOT_PATH
>
> so there are some solution in poky ? thanks for you attention :)
use TCMODE="external-sourcery"
and mention csl binary toolchain install tree using EXTERNAL_TOOLCHAIN
in your local.conf
>> B.R.
> -- jojo
>
>
>
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Help with configuring Yocto with an external toolchain except "csl"
2012-06-20 5:47 ` Khem Raj
@ 2012-06-21 1:46 ` jojo
0 siblings, 0 replies; 4+ messages in thread
From: jojo @ 2012-06-21 1:46 UTC (permalink / raw)
To: Khem Raj; +Cc: poky
[-- Attachment #1: Type: text/plain, Size: 1644 bytes --]
@kr,
Thanks for your reply.
I have put following variables into local.conf & tested, but failed.
TCMODE = "external-csl"
EXTERNAL_TOOLCHAIN = "/opt/toolchain/gnuarm-4.4.1/"
I think my situation is that i need three variables to control external toolchain at least like *buildroot*
BR2_TOOLCHAIN_EXTERNAL_PREFIX
BR2_TOOLCHAIN_EXTERNAL_PATH
BR2_TOOLCHAIN_EXTERNAL_SYSROOT_PATH
because that my toolchain pre-build source code is not from *code sourcery* & directory struct is not like *code sourcery* also.
is there some good method to fix this ? thanks
B.R.
-- jojo
在 2012-6-20，下午1:47， Khem Raj 写道：
> On Tue, Jun 19, 2012 at 2:06 AM, jojo <rjiejie@gmail.com> wrote:
>> @all,
>> I google some information about this topic and then,
>> i found the case is that jut support "CodeSourcery labs" toolchain.
>>
>> I think my external toolchain is not standard of directory like "tcmode-externl-csl".
>> I can use "buildroot" to use this toolchian that just use three variables following :
>> BR2_TOOLCHAIN_EXTERNAL_PREFIX
>> BR2_TOOLCHAIN_EXTERNAL_PATH
>> BR2_TOOLCHAIN_EXTERNAL_SYSROOT_PATH
>>
>> so there are some solution in poky ? thanks for you attention :)
>
> use TCMODE="external-sourcery"
> and mention csl binary toolchain install tree using EXTERNAL_TOOLCHAIN
>
> in your local.conf
>
>
>>> B.R.
>> -- jojo
>>
>>
>>
>>
>> _______________________________________________
>> poky mailing list
>> poky@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/poky
[-- Attachment #2: Type: text/html, Size: 5196 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Help with configuring Yocto with an external toolchain except "csl"
@ 2012-06-19 13:36 jojo
0 siblings, 0 replies; 4+ messages in thread
From: jojo @ 2012-06-19 13:36 UTC (permalink / raw)
To: Yocto discussion list
[-- Attachment #1: Type: text/plain, Size: 508 bytes --]
@all,
I google some information about this topic and then,
i found the case is that jut support "CodeSourcery labs" toolchain.
I think my external toolchain is not standard of directory like "tcmode-externl-csl".
I can use "buildroot" to use this toolchian that just use three variables following :
BR2_TOOLCHAIN_EXTERNAL_PREFIX
BR2_TOOLCHAIN_EXTERNAL_PATH
BR2_TOOLCHAIN_EXTERNAL_SYSROOT_PATH
so there are some solution in poky ? thanks for you attention :)
B.R.
-- jojo
[-- Attachment #2: Type: text/html, Size: 2819 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-06-21 1:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-19 9:06 Help with configuring Yocto with an external toolchain except "csl" jojo
2012-06-20 5:47 ` Khem Raj
2012-06-21 1:46 ` jojo
2012-06-19 13:36 jojo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.