* [U-Boot] [PATCH v2 2/3] mx6sabresd: Select pinctrl driver
2019-05-21 13:37 [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size Fabio Estevam
@ 2019-05-21 13:37 ` Fabio Estevam
2019-06-10 9:49 ` sbabic at denx.de
2019-05-21 13:37 ` [U-Boot] [PATCH v2 3/3] mx6sabresd: Remove U-Boot proper mmc initialization Fabio Estevam
` (2 subsequent siblings)
3 siblings, 1 reply; 9+ messages in thread
From: Fabio Estevam @ 2019-05-21 13:37 UTC (permalink / raw)
To: u-boot
With the conversion to DM we should select the pinctrl driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- None
configs/mx6sabresd_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index 5c2d055561..f7ba632b2a 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -81,6 +81,8 @@ CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y
CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
CONFIG_PCI=y
CONFIG_DM_REGULATOR=y
CONFIG_SPI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 2/3] mx6sabresd: Select pinctrl driver
2019-05-21 13:37 ` [U-Boot] [PATCH v2 2/3] mx6sabresd: Select pinctrl driver Fabio Estevam
@ 2019-06-10 9:49 ` sbabic at denx.de
0 siblings, 0 replies; 9+ messages in thread
From: sbabic at denx.de @ 2019-06-10 9:49 UTC (permalink / raw)
To: u-boot
> With the conversion to DM we should select the pinctrl driver.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 3/3] mx6sabresd: Remove U-Boot proper mmc initialization
2019-05-21 13:37 [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size Fabio Estevam
2019-05-21 13:37 ` [U-Boot] [PATCH v2 2/3] mx6sabresd: Select pinctrl driver Fabio Estevam
@ 2019-05-21 13:37 ` Fabio Estevam
2019-06-10 9:40 ` [U-Boot] [PATCH v2 3/3] mx6sabresd: Remove U-Boot proper mmc sbabic at denx.de
2019-05-24 21:31 ` [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size Ezequiel Garcia
2019-06-10 9:39 ` [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to sbabic at denx.de
3 siblings, 1 reply; 9+ messages in thread
From: Fabio Estevam @ 2019-05-21 13:37 UTC (permalink / raw)
To: u-boot
After the conversion to DM there is no need to have mmc initialization
code inside U-Boot proper.
Remove the unneeded code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- None
board/freescale/mx6sabresd/mx6sabresd.c | 44 -------------------------
1 file changed, 44 deletions(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 385a18e923..cdfc5ff77f 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -287,49 +287,6 @@ int board_mmc_getcd(struct mmc *mmc)
int board_mmc_init(bd_t *bis)
{
-#ifndef CONFIG_SPL_BUILD
- int ret;
- int i;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-Boot device node) (Physical Port)
- * mmc0 SD2
- * mmc1 SD3
- * mmc2 eMMC
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc2_pads);
- gpio_request(USDHC2_CD_GPIO, "USDHC2 CD");
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- break;
- case 1:
- SETUP_IOMUX_PADS(usdhc3_pads);
- gpio_request(USDHC3_CD_GPIO, "USDHC3 CD");
- gpio_direction_input(USDHC3_CD_GPIO);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- case 2:
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers"
- "(%d) then supported by the board (%d)\n",
- i + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret)
- return ret;
- }
-
- return 0;
-#else
struct src *psrc = (struct src *)SRC_BASE_ADDR;
unsigned reg = readl(&psrc->sbmr1) >> 11;
/*
@@ -363,7 +320,6 @@ int board_mmc_init(bd_t *bis)
}
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-#endif
}
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 3/3] mx6sabresd: Remove U-Boot proper mmc
2019-05-21 13:37 ` [U-Boot] [PATCH v2 3/3] mx6sabresd: Remove U-Boot proper mmc initialization Fabio Estevam
@ 2019-06-10 9:40 ` sbabic at denx.de
0 siblings, 0 replies; 9+ messages in thread
From: sbabic at denx.de @ 2019-06-10 9:40 UTC (permalink / raw)
To: u-boot
> After the conversion to DM there is no need to have mmc initialization
> code inside U-Boot proper.
> Remove the unneeded code.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size
2019-05-21 13:37 [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size Fabio Estevam
2019-05-21 13:37 ` [U-Boot] [PATCH v2 2/3] mx6sabresd: Select pinctrl driver Fabio Estevam
2019-05-21 13:37 ` [U-Boot] [PATCH v2 3/3] mx6sabresd: Remove U-Boot proper mmc initialization Fabio Estevam
@ 2019-05-24 21:31 ` Ezequiel Garcia
2019-05-24 21:41 ` Fabio Estevam
2019-06-10 9:39 ` [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to sbabic at denx.de
3 siblings, 1 reply; 9+ messages in thread
From: Ezequiel Garcia @ 2019-05-24 21:31 UTC (permalink / raw)
To: u-boot
On Tue, 2019-05-21 at 10:37 -0300, Fabio Estevam wrote:
> Currently the mx6qsabresd board does not boot:
>
> U-Boot SPL 2019.07-rc2 (May 16 2019 - 14:28:55 -0300)
> Trying to boot from MMC1
> spl: could not find mmc device 0. error: -19
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
> The reason for the boot failure is that that the SPL
> size got greater than the 68KB limit (4KB header + 64KB max
> size) as explained in include/configs/imx6_spl.h.
>
> Remove the CONFIG_SPL_DM option, so that the SPL binary could
> fit into the allowed size and the board can boot again.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes since v1:
> - Improve the commit log by explaining that the boot failure
> is caused by SPL size overflow
>
> configs/mx6sabresd_defconfig | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
> index d3ed3c4543..5c2d055561 100644
> --- a/configs/mx6sabresd_defconfig
> +++ b/configs/mx6sabresd_defconfig
> @@ -65,7 +65,6 @@ CONFIG_SPL_MULTI_DTB_FIT=y
> CONFIG_SPL_OF_LIST="imx6dl-sabresd imx6q-sabresd imx6qp-sabresd"
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> -CONFIG_SPL_DM=y
> CONFIG_USB_FUNCTION_FASTBOOT=y
> CONFIG_FASTBOOT_BUF_ADDR=0x12000000
> CONFIG_FASTBOOT_BUF_SIZE=0x10000000
Since we care about the SPL size, is there any reason why we have CONFIG_SPL_FS_EXT4?
AFAICS, u-boot.img is not on a filesystem, so why do we need ext2/3/4?
Thanks,
Eze
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size
2019-05-24 21:31 ` [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size Ezequiel Garcia
@ 2019-05-24 21:41 ` Fabio Estevam
2019-05-24 22:36 ` Ezequiel Garcia
0 siblings, 1 reply; 9+ messages in thread
From: Fabio Estevam @ 2019-05-24 21:41 UTC (permalink / raw)
To: u-boot
Hi Ezequiel,
On Fri, May 24, 2019 at 6:31 PM Ezequiel Garcia <ezequiel@collabora.com> wrote:
> Since we care about the SPL size, is there any reason why we have CONFIG_SPL_FS_EXT4?
>
> AFAICS, u-boot.img is not on a filesystem, so why do we need ext2/3/4?
Yes, I will remove CONFIG_SPL_FS_EXT4 and CONFIG_SPL_I2C_SUPPORT=y in
my next round of patches to reduce SPL size on mx6sabresd.
Thanks
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size
2019-05-24 21:41 ` Fabio Estevam
@ 2019-05-24 22:36 ` Ezequiel Garcia
0 siblings, 0 replies; 9+ messages in thread
From: Ezequiel Garcia @ 2019-05-24 22:36 UTC (permalink / raw)
To: u-boot
On Fri, 2019-05-24 at 18:41 -0300, Fabio Estevam wrote:
> Hi Ezequiel,
>
> On Fri, May 24, 2019 at 6:31 PM Ezequiel Garcia <ezequiel@collabora.com> wrote:
>
> > Since we care about the SPL size, is there any reason why we have CONFIG_SPL_FS_EXT4?
> >
> > AFAICS, u-boot.img is not on a filesystem, so why do we need ext2/3/4?
>
> Yes, I will remove CONFIG_SPL_FS_EXT4 and CONFIG_SPL_I2C_SUPPORT=y in
> my next round of patches to reduce SPL size on mx6sabresd.
>
Perhaps instead of per-board, we can check the MX6 lot.
PS: Not needed on Wandboard either, and I found a way to move to TINY_MMC.
Interestingly, and as we would expect, turning off EXT had more impact.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to
2019-05-21 13:37 [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size Fabio Estevam
` (2 preceding siblings ...)
2019-05-24 21:31 ` [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size Ezequiel Garcia
@ 2019-06-10 9:39 ` sbabic at denx.de
3 siblings, 0 replies; 9+ messages in thread
From: sbabic at denx.de @ 2019-06-10 9:39 UTC (permalink / raw)
To: u-boot
> Currently the mx6qsabresd board does not boot:
> U-Boot SPL 2019.07-rc2 (May 16 2019 - 14:28:55 -0300)
> Trying to boot from MMC1
> spl: could not find mmc device 0. error: -19
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
> The reason for the boot failure is that that the SPL
> size got greater than the 68KB limit (4KB header + 64KB max
> size) as explained in include/configs/imx6_spl.h.
> Remove the CONFIG_SPL_DM option, so that the SPL binary could
> fit into the allowed size and the board can boot again.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 9+ messages in thread