Re: [OOPS?] 2.6-test11 : problem about irq18.

* Re: [OOPS?] 2.6-test11 : problem about irq18.
@ 2003-12-08 18:48 Jon Burgess
       [not found] ` <3FD5E454.2030404@inp-net.eu.org>
  0 siblings, 1 reply; 6+ messages in thread
From: Jon Burgess @ 2003-12-08 18:48 UTC (permalink / raw)
  To: raphael.rigo; +Cc: linux kernel

[-- Attachment #1: Type: text/plain, Size: 764 bytes --]

Raphaël Rigo wrote:

 > Dec 7 18:27:45 pici kernel: Disabling IRQ #18
 >
 > I am using a P4 2.6 Ghz without HT activated
 > 512 MB DDR PC3200 on an ASUS P4P800 Deluxe MB.
 > HardDrive is on SATA (native mode) : Maxtor 6Y120MO.

Sounds like the known problem with an interrupt storm with the ICH5
See "Issue #2" at 
http://www.ussg.iu.edu/hypermail/linux/kernel/0312.0/0597.html

 > 2.4.23 doesn't have this problem but keeps using 30-50% CPU even if I 
do nothing.

Try vmstat, I expect you'll see ~100k IRQ/s

You could try using the ata_piix driver (located amongst the SCSI drivers).

If that still doesn't help, you could try adding the patch attached to 
drivers/scsi/libata-core.c
this should make the ata_piix driver catch the spurious interrupts

    Jon


[-- Attachment #2: libata-spurious2.diff --]
[-- Type: text/plain, Size: 1322 bytes --]

--- libata-core.c-orig	2003-12-07 01:54:19.000000000 +0000
+++ libata-core.c	2003-12-07 16:25:11.961806872 +0000
@@ -2386,6 +2386,37 @@
 }
 
 /**
+ *	ata_chk_spurious_int - Check for spurious interrupts
+ *	@ap: port to which command is being issued
+ *
+ *	Examines the DMA status registers and clears
+ *      unexpected interrupts
+ *
+ *	LOCKING:
+ */
+static inline void ata_chk_spurious_int(struct ata_port *ap) {
+	int host_stat;
+	
+	if (ap->flags & ATA_FLAG_MMIO) {
+		void *mmio = (void *) ap->ioaddr.bmdma_addr;
+		host_stat = readb(mmio + ATA_DMA_STATUS);
+	} else
+		host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+	
+	if ((host_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) == ATA_DMA_INTR) {
+		if (ap->flags & ATA_FLAG_MMIO) {
+			void *mmio = (void *) ap->ioaddr.bmdma_addr;
+			writeb(host_stat & ~ATA_DMA_ERR, mmio + ATA_DMA_STATUS);
+		} else
+			outb(host_stat & ~ATA_DMA_ERR, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+		
+		DPRINTK("ata%u: Caught spurious interrupt, status 0x%X\n", ap->id, host_stat);
+		udelay(1);
+	}
+}
+
+
+/**
  *	ata_interrupt -
  *	@irq:
  *	@dev_instance:
@@ -2417,6 +2448,7 @@
 			qc = ata_qc_from_tag(ap, ap->active_tag);
 			if (qc && ((qc->flags & ATA_QCFLAG_POLL) == 0))
 				handled += ata_host_intr(ap, qc);
+			ata_chk_spurious_int(ap);
 		}
 	}
 

^ permalink raw reply	[flat|nested] 6+ messages in thread