From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Drew Fustini <drew@beagleboard.org>
Cc: Patrick Menschel <menschel.p@posteo.de>,
Oliver Hartkopp <socketcan@hartkopp.net>,
linux-can@vger.kernel.org, Josh S <josh@macchina.cc>
Subject: Re: mcp251xfd on RPi 5.4 downstream
Date: Wed, 28 Oct 2020 08:57:37 +0100 [thread overview]
Message-ID: <3d19330b-860b-7d76-bc6d-768a7b00ed4b@pengutronix.de> (raw)
In-Reply-To: <CAPgEAj4W61tCSkdrCP2J4dL7WwQ1NKzFCUGjY9o4_qj+NG5KEA@mail.gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 1098 bytes --]
On 10/28/20 4:47 AM, Drew Fustini wrote:
>> I assumed the Waveshare instructions work but that is error on my part
>> for not actually reproducing. That is what I will do first.
>> Ultimately, I want the freshly upstreamed driver working but I should
>> check if their driver tarball works.
>
> The Waveshare installer uses the 4.19 kernel with the mcp25xxfd
> driver. However, it also fails, sio I think I need to dig deeper:
>
> pi@raspberrypi:~ $ dmesg | grep -Ei spi\|can
> [ 4.263765] CAN device driver interface
> [ 4.286258] mcp25xxfd_can: loading out-of-tree module taints kernel.
> [ 5.477511] mcp25xxfd spi1.0: Cannot initialize MCP2517. Wrong
> wiring? (oscilator register reads as 00000000)
It reads the osc as 0x0, too. This is the same error as you've seen with my driver.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2020-10-28 21:34 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-22 3:10 mcp251xfd on RPi 5.4 downstream Drew Fustini
2020-10-22 6:00 ` Drew Fustini
2020-10-22 6:33 ` Marc Kleine-Budde
2020-10-22 18:42 ` Drew Fustini
2020-10-25 4:30 ` Drew Fustini
2020-10-25 8:49 ` Oliver Hartkopp
2020-10-25 10:58 ` Marc Kleine-Budde
2020-10-25 17:43 ` Patrick Menschel
2020-10-25 18:14 ` Marc Kleine-Budde
2020-10-25 18:42 ` Patrick Menschel
2020-10-26 1:59 ` Drew Fustini
2020-10-26 2:50 ` Drew Fustini
2020-10-26 5:16 ` Patrick Menschel
2020-10-26 7:45 ` Marc Kleine-Budde
2020-10-26 9:40 ` Marc Kleine-Budde
2020-10-26 16:51 ` Patrick Menschel
2020-10-26 17:00 ` Marc Kleine-Budde
2020-10-27 2:22 ` Drew Fustini
2020-10-27 6:35 ` Drew Fustini
2020-10-27 7:06 ` Marc Kleine-Budde
2020-10-27 18:18 ` Patrick Menschel
2020-10-27 18:22 ` Marc Kleine-Budde
2020-10-28 1:57 ` Drew Fustini
2020-10-28 3:47 ` Drew Fustini
2020-10-28 7:57 ` Marc Kleine-Budde [this message]
2020-10-31 12:27 ` Drew Fustini
2020-10-31 15:14 ` Patrick Menschel
2020-10-31 15:35 ` Patrick Menschel
2020-10-31 21:57 ` Drew Fustini
2020-11-01 22:49 ` Drew Fustini
2020-11-02 7:25 ` Marc Kleine-Budde
2020-11-02 8:18 ` Marc Kleine-Budde
[not found] ` <CAPgEAj7LcX3cb+syhtR1i3Uo1XkYYFQ_wDPV8GniaA-YwPk2Hg@mail.gmail.com>
2020-11-02 11:00 ` Marc Kleine-Budde
[not found] ` <CAPgEAj7BTJyiBg4QkKuekYH0zyrA-10dby3Lgb5qj2uiD4ZOYQ@mail.gmail.com>
2020-11-02 14:22 ` mcp251xfd: loopback test on waveshare canfd hat Marc Kleine-Budde
2020-11-02 14:35 ` Drew Fustini
2020-11-02 14:38 ` Marc Kleine-Budde
2020-11-02 17:34 ` mcp251xfd on RPi 5.4 downstream Patrick Menschel
2020-11-02 18:47 ` Patrick Menschel
2020-11-02 18:57 ` Thomas.Kopp
2020-11-02 19:32 ` Patrick Menschel
2020-11-04 18:48 ` Patrick Menschel
2020-11-05 7:15 ` Marc Kleine-Budde
2020-11-05 18:11 ` Patrick Menschel
2020-11-06 9:00 ` Marc Kleine-Budde
2020-11-06 11:31 ` Patrick Menschel
2020-11-06 11:36 ` Marc Kleine-Budde
2020-11-06 11:46 ` Patrick Menschel
2020-11-05 8:08 ` Marc Kleine-Budde
2020-11-05 8:07 ` Marc Kleine-Budde
2020-11-02 7:55 ` Marc Kleine-Budde
2020-11-02 7:26 ` Marc Kleine-Budde
2020-10-26 7:43 ` Marc Kleine-Budde
2020-11-20 12:32 ` Marc Kleine-Budde
[not found] ` <CAEf4M_B68X2T0rkaq0tqahBFPc+Gbvac7-+G0j5jd-g4j+j01g@mail.gmail.com>
2020-11-20 13:16 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d19330b-860b-7d76-bc6d-768a7b00ed4b@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=drew@beagleboard.org \
--cc=josh@macchina.cc \
--cc=linux-can@vger.kernel.org \
--cc=menschel.p@posteo.de \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.