From: Drew Fustini <drew@beagleboard.org>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Patrick Menschel <menschel.p@posteo.de>,
Oliver Hartkopp <socketcan@hartkopp.net>,
linux-can@vger.kernel.org, Josh S <josh@macchina.cc>
Subject: Re: mcp251xfd on RPi 5.4 downstream
Date: Tue, 27 Oct 2020 20:57:51 -0500 [thread overview]
Message-ID: <CAPgEAj5JheUirqr2kLrjJpwCaK3+HZyo8r8uKk25zMREVXWT3Q@mail.gmail.com> (raw)
In-Reply-To: <2593d8e0-2d42-0461-e2e1-86a71b415476@pengutronix.de>
On Tue, Oct 27, 2020 at 1:23 PM Marc Kleine-Budde <mkl@pengutronix.de> wrote:
>
> On 10/27/20 7:18 PM, Patrick Menschel wrote:
> >
> >>> It is different but I'm having trouble understanding why it works and
> >>> the new overlay for the newer driver does not.
> >>
> >> Have you actually tested the waveshare driver and overlay with your setup?
> >>
> >> If you have a scope or logic analyser attach it to SPI bus (MISO, MOSI, Clock,
> >> Chipselect and the IRQ Line of the Chip) and check what's going on there.
> >>
> >> Marc
> >>
> >
> > Is the target path for clocks correct?
> >
> > I mean "/clocks"
>
> It doesn't matter where you put them...
>
> > https://gist.github.com/pdp7/784d0ba8b9648d20ab055747ec945225#file-2xmcp2517fd-overlay-dts-L49
> >
> > instead of "/"
> >
> > https://github.com/marckleinebudde/linux/blob/v5.4-rpi/mcp251xfd-20201022-54/arch/arm/boot/dts/overlays/mcp251xfd-spi0-0-overlay.dts#L38
>
> The mcp251xfd node references them via the label ("<&can_osc>"):
>
> https://github.com/marckleinebudde/linux/blob/v5.4-rpi/mcp251xfd-20201022-54/arch/arm/boot/dts/overlays/mcp251xfd-spi0-0-overlay.dts#L61
>
> The driver will bail out even earlier if no clock is found:
>
> https://github.com/marckleinebudde/linux/blob/v5.4-rpi/mcp251xfd-20201022-54/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c#L2764
>
> regards
> Marc
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Embedded Linux | https://www.pengutronix.de |
> Vertretung West/Dortmund | Phone: +49-231-2826-924 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
Thank you for the suggestions. I've not been as multi-tasking as I
hoped during ELC-E :)
I assumed the Waveshare instructions work but that is error on my part
for not actually reproducing. That is what I will do first.
Ultimately, I want the freshly upstreamed driver working but I should
check if their driver tarball works.
thanks,
drew
next prev parent reply other threads:[~2020-10-28 23:08 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-22 3:10 mcp251xfd on RPi 5.4 downstream Drew Fustini
2020-10-22 6:00 ` Drew Fustini
2020-10-22 6:33 ` Marc Kleine-Budde
2020-10-22 18:42 ` Drew Fustini
2020-10-25 4:30 ` Drew Fustini
2020-10-25 8:49 ` Oliver Hartkopp
2020-10-25 10:58 ` Marc Kleine-Budde
2020-10-25 17:43 ` Patrick Menschel
2020-10-25 18:14 ` Marc Kleine-Budde
2020-10-25 18:42 ` Patrick Menschel
2020-10-26 1:59 ` Drew Fustini
2020-10-26 2:50 ` Drew Fustini
2020-10-26 5:16 ` Patrick Menschel
2020-10-26 7:45 ` Marc Kleine-Budde
2020-10-26 9:40 ` Marc Kleine-Budde
2020-10-26 16:51 ` Patrick Menschel
2020-10-26 17:00 ` Marc Kleine-Budde
2020-10-27 2:22 ` Drew Fustini
2020-10-27 6:35 ` Drew Fustini
2020-10-27 7:06 ` Marc Kleine-Budde
2020-10-27 18:18 ` Patrick Menschel
2020-10-27 18:22 ` Marc Kleine-Budde
2020-10-28 1:57 ` Drew Fustini [this message]
2020-10-28 3:47 ` Drew Fustini
2020-10-28 7:57 ` Marc Kleine-Budde
2020-10-31 12:27 ` Drew Fustini
2020-10-31 15:14 ` Patrick Menschel
2020-10-31 15:35 ` Patrick Menschel
2020-10-31 21:57 ` Drew Fustini
2020-11-01 22:49 ` Drew Fustini
2020-11-02 7:25 ` Marc Kleine-Budde
2020-11-02 8:18 ` Marc Kleine-Budde
[not found] ` <CAPgEAj7LcX3cb+syhtR1i3Uo1XkYYFQ_wDPV8GniaA-YwPk2Hg@mail.gmail.com>
2020-11-02 11:00 ` Marc Kleine-Budde
[not found] ` <CAPgEAj7BTJyiBg4QkKuekYH0zyrA-10dby3Lgb5qj2uiD4ZOYQ@mail.gmail.com>
2020-11-02 14:22 ` mcp251xfd: loopback test on waveshare canfd hat Marc Kleine-Budde
2020-11-02 14:35 ` Drew Fustini
2020-11-02 14:38 ` Marc Kleine-Budde
2020-11-02 17:34 ` mcp251xfd on RPi 5.4 downstream Patrick Menschel
2020-11-02 18:47 ` Patrick Menschel
2020-11-02 18:57 ` Thomas.Kopp
2020-11-02 19:32 ` Patrick Menschel
2020-11-04 18:48 ` Patrick Menschel
2020-11-05 7:15 ` Marc Kleine-Budde
2020-11-05 18:11 ` Patrick Menschel
2020-11-06 9:00 ` Marc Kleine-Budde
2020-11-06 11:31 ` Patrick Menschel
2020-11-06 11:36 ` Marc Kleine-Budde
2020-11-06 11:46 ` Patrick Menschel
2020-11-05 8:08 ` Marc Kleine-Budde
2020-11-05 8:07 ` Marc Kleine-Budde
2020-11-02 7:55 ` Marc Kleine-Budde
2020-11-02 7:26 ` Marc Kleine-Budde
2020-10-26 7:43 ` Marc Kleine-Budde
2020-11-20 12:32 ` Marc Kleine-Budde
[not found] ` <CAEf4M_B68X2T0rkaq0tqahBFPc+Gbvac7-+G0j5jd-g4j+j01g@mail.gmail.com>
2020-11-20 13:16 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPgEAj5JheUirqr2kLrjJpwCaK3+HZyo8r8uKk25zMREVXWT3Q@mail.gmail.com \
--to=drew@beagleboard.org \
--cc=josh@macchina.cc \
--cc=linux-can@vger.kernel.org \
--cc=menschel.p@posteo.de \
--cc=mkl@pengutronix.de \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.