* RE: hotplug script goes bonkers with 2.6.1
2004-01-13 8:10 hotplug script goes bonkers with 2.6.1 John H.
@ 2004-01-13 20:13 ` John H.
2004-01-13 20:35 ` Greg KH
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: John H. @ 2004-01-13 20:13 UTC (permalink / raw)
To: linux-hotplug
unplugging scanner before running hotplug seems the temporary solution.
any ideas on a long term one?
--- On Tue 01/13, John H. < mrmailer@myway.com > wrote:
From: John H. [mailto: mrmailer@myway.com]
To: linux-hotplug-devel@lists.sourceforge.net
Date: Tue, 13 Jan 2004 03:10:13 -0500 (EST)
Subject: hotplug script goes bonkers with 2.6.1
<br>After I upgraded to 2.6.1 from 2.6.0(I tried upgrading my modutils and module-init-tools to latest versions to see if that would fix this, but it would not), I get this when loading hotplug script(even the latest one, which I upgraded to as well)<br><br><br><br><br><br> service hotplug start<br><br>** can't synthesize pci hotplug events<br><br>Unable to handle kernel NULL pointer dereference at virtual address 0000001e<br><br> printing eip:<br><br>e183623c<br><br>*pde = 00000000<br><br>Oops: 0000 [#1]<br><br>CPU: 0<br><br>EIP: 0060:[<e183623c>] Tainted: P<br><br>EFLAGS: 00010282<br><br>EIP is at disconnect_scanner+0x2c/0x66 [scanner]<br><br>eax: de7413c0 ebx: de7413d4 ecx: e1836210 edx: 00000007<br><br>esi: 00000000 edi: de63c340 ebp: e1839dbc esp: dfdf5e20<br><br>ds: 007b es: 007b ss: 0068<br><br>Process khubd (pid: 113, threadinfofldf4000 taskfldfc6a0)<br><br>Stack: de7413c0 e1839e38 de7413c0 e1839ea0 e183c11b de7413c0 de7413c0 de7413d4<br><br> de7413d4 e1839ec0 c01f6c14 de7413d4 de741400 de63c37c de63c368 e1835ba7<br><br> de7413d4 de7413c0 de63c37c e1839dcc 00000000 00000000 c01b12c8 de63c37c<br><br>Call Trace:<br><br> [<e183c11b>] usb_unbind_interface+0x7b/0x80 [usbcore]<br><br> [<c01f6c14>] device_release_driver+0x64/0x70<br><br> [<e1835ba7>] destroy_scanner+0x77/0xd0 [scanner]<br><br> [<c01b12c8>] kobject_cleanup+0x98/0xa0<br><br> [<e183c11b>] usb_unbind_interface+0x7b/0x80 [usbcore]<br><br> [<c01f6c14>] device_release_driver+0x64/0x70<br><br> [<c01f6d89>] bus_remove_device+0x79/0xc0<br><br> [<c01f5bdc>] device_del+0x6c/0xa0<br><br> [<e18427ff>] usb_disable_device+0x6f/0xb0 [usbcore]<br><br> [<e183cbbb>] usb_disconnect+0xbb/0x110 [usbcore]<br><br> [<e183cbfe>] usb_disconnect+0xfe/0x110 [usbcore]<br><br> [<e183f34f>] hub_port_connect_change+0x32f/0x340 [usbcore]<br><br> [<e183ec63>] hub_port_status+0x43/0xb0 [usbcore]<br><br> [<e183f62a>] hub_events+0x2ca/0x340 [usbcore]<br><br> [<e183f6cd>] hub_thread+0x2d/0xf0 [usbcore]<br><br> [<c01092f2>] ret_from_fork+0x6/0x14
<br><br> [<c011b750>] default_wake_function+0x0/0x20<br><br> [<e183f6a0>] hub_thread+0x0/0xf0 [usbcore]<br><br> [<c0107289>] kernel_thread_helper+0x5/0xc<br><br><br><br>Code: 80 7e 1e 00 75 27 85 f6 74 17 8d 46 3c 8b 5c 24 08 8b 74 24<br><br> <6>updfstab: numerical sysctl 1 23 is obsolete.<br><br><br><br><br><br>_______________________________________________<br>No banners. No pop-ups. No kidding.<br>Introducing My Way - http://www.myway.com<br><br><br>-------------------------------------------------------<br>This SF.net email is sponsored by: Perforce Software.<br>Perforce is the Fast Software Configuration Management System offering<br>advanced branching capabilities and atomic changes on 50+ platforms.<br>Free Eval! http://www.perforce.com/perforce/loadprog.html<br>_______________________________________________<br>Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net<br>Linux-hotplug-devel@lists.sourceforge.net<br>https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel<br>
_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: hotplug script goes bonkers with 2.6.1
2004-01-13 8:10 hotplug script goes bonkers with 2.6.1 John H.
2004-01-13 20:13 ` John H.
@ 2004-01-13 20:35 ` Greg KH
2004-01-14 19:38 ` Leon Cogs
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2004-01-13 20:35 UTC (permalink / raw)
To: linux-hotplug
On Tue, Jan 13, 2004 at 03:13:34PM -0500, John H. wrote:
>
> unplugging scanner before running hotplug seems the temporary solution.
>
> any ideas on a long term one?
Yes, don't use the scanner driver at all :)
It's obsolete and you can just use xsane through usbfs instead.
It's a bug in the scanner driver that is causing this. Please let the
scanner driver maintainer know about it.
thanks,
greg k-h
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re:hotplug script goes bonkers with 2.6.1
2004-01-13 8:10 hotplug script goes bonkers with 2.6.1 John H.
2004-01-13 20:13 ` John H.
2004-01-13 20:35 ` Greg KH
@ 2004-01-14 19:38 ` Leon Cogs
2004-01-15 7:01 ` John H.
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Leon Cogs @ 2004-01-14 19:38 UTC (permalink / raw)
To: linux-hotplug
Same here.
I unloaded scanner form kernel but I don't know how to set it up
otherwise as advised
"you can just use xsane through usbfs instead"
. I have looked all over. Below is a line in /etc/sysconfig/hotplug
could this cause bother if scanner modules has been deleted from kernel?
##Type: string
##Default: scanner
##ServiceRestart:
#
HOTPLUG_USB_MODULES_TO_UNLOAD="scanner"
Also printer epson 740 doesn't load as a module unless I modprobe usblp
and then set it up in Yast2 Suse 9, How is this done.
Another problem is a maxtor usb2 hard disk and iomega usb2 cdwriter
which dont hotplug in 2.6.1-rc1 Below are 2 lines which I included in
fstab which seem to access these devices at the moment, but I am not
sure about.
/dev/sda1 /media/sda1 auto sync,noauto,user,exec 0 0 # for ext hd
dev/sr0 /media/sr0 auto ro,noauto,user,exec 0 0 #for writer
LmCogs
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re:hotplug script goes bonkers with 2.6.1
2004-01-13 8:10 hotplug script goes bonkers with 2.6.1 John H.
` (2 preceding siblings ...)
2004-01-14 19:38 ` Leon Cogs
@ 2004-01-15 7:01 ` John H.
2004-01-15 7:05 ` John H.
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: John H. @ 2004-01-15 7:01 UTC (permalink / raw)
To: linux-hotplug
was this resolved? if so, how to do it?
--- On Wed 01/14, Leon Cogs < leoncogs@eircom.net > wrote:
From: Leon Cogs [mailto: leoncogs@eircom.net]
To: linux-hotplug-devel@lists.sourceforge.net
Date: Wed, 14 Jan 2004 19:38:50 +0000
Subject: Re:hotplug script goes bonkers with 2.6.1
Same here. <br><br>I unloaded scanner form kernel but I don't know how to set it up <br>otherwise as advised<br><br>"you can just use xsane through usbfs instead"<br><br>. I have looked all over. Below is a line in /etc/sysconfig/hotplug <br>could this cause bother if scanner modules has been deleted from kernel?<br><br>##Type: string<br>##Default: scanner<br>##ServiceRestart:<br>#<br>HOTPLUG_USB_MODULES_TO_UNLOAD="scanner"<br><br>Also printer epson 740 doesn't load as a module unless I modprobe usblp <br>and then set it up in Yast2 Suse 9, How is this done.<br><br>Another problem is a maxtor usb2 hard disk and iomega usb2 cdwriter <br>which dont hotplug in 2.6.1-rc1 Below are 2 lines which I included in <br>fstab which seem to access these devices at the moment, but I am not <br>sure about.<br>/dev/sda1 /media/sda1 auto sync,noauto,user,exec 0 0 # for ext hd<br> dev/sr0 /media/sr0 auto ro,noauto,user,exec 0 0 #for writer<br><br>LmCogs<br><br><br><br>-------------------------------------------------------<br>This SF.net email is sponsored by: Perforce Software.<br>Perforce is the Fast Software Configuration Management System offering<br>advanced branching capabilities and atomic changes on 50+ platforms.<br>Free Eval! http://www.perforce.com/perforce/loadprog.html<br>_______________________________________________<br>Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net<br>Linux-hotplug-devel@lists.sourceforge.net<br>https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel<br>
_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re:hotplug script goes bonkers with 2.6.1
2004-01-13 8:10 hotplug script goes bonkers with 2.6.1 John H.
` (3 preceding siblings ...)
2004-01-15 7:01 ` John H.
@ 2004-01-15 7:05 ` John H.
2004-01-15 8:05 ` John H.
2004-01-16 20:49 ` hotplug " Leon Cogs
6 siblings, 0 replies; 8+ messages in thread
From: John H. @ 2004-01-15 7:05 UTC (permalink / raw)
To: linux-hotplug
gosh, modules with 2.6.1 period are just screwy for me.
lsomod, locks, modprobe locks, insmod locks.... i have to close their xterm.
anyone have an idea what happened? is it the hotplug script?
_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re:hotplug script goes bonkers with 2.6.1
2004-01-13 8:10 hotplug script goes bonkers with 2.6.1 John H.
` (4 preceding siblings ...)
2004-01-15 7:05 ` John H.
@ 2004-01-15 8:05 ` John H.
2004-01-16 20:49 ` hotplug " Leon Cogs
6 siblings, 0 replies; 8+ messages in thread
From: John H. @ 2004-01-15 8:05 UTC (permalink / raw)
To: linux-hotplug
deleting scanner module and rebooting seemed to fix it.
however, xsane now no longer sees my scanner.
help?
--- On Thu 01/15, John H. < mrmailer@myway.com > wrote:
From: John H. [mailto: mrmailer@myway.com]
To: linux-hotplug-devel@lists.sourceforge.net
Date: Thu, 15 Jan 2004 02:05:31 -0500 (EST)
Subject: Re:hotplug script goes bonkers with 2.6.1
<br>gosh, modules with 2.6.1 period are just screwy for me.<br><br><br><br>lsomod, locks, modprobe locks, insmod locks.... i have to close their xterm.<br><br>anyone have an idea what happened? is it the hotplug script?<br><br>_______________________________________________<br>No banners. No pop-ups. No kidding.<br>Introducing My Way - http://www.myway.com<br><br><br>-------------------------------------------------------<br>This SF.net email is sponsored by: Perforce Software.<br>Perforce is the Fast Software Configuration Management System offering<br>advanced branching capabilities and atomic changes on 50+ platforms.<br>Free Eval! http://www.perforce.com/perforce/loadprog.html<br>_______________________________________________<br>Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net<br>Linux-hotplug-devel@lists.sourceforge.net<br>https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel<br>
_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: hotplug script goes bonkers with 2.6.1
2004-01-13 8:10 hotplug script goes bonkers with 2.6.1 John H.
` (5 preceding siblings ...)
2004-01-15 8:05 ` John H.
@ 2004-01-16 20:49 ` Leon Cogs
6 siblings, 0 replies; 8+ messages in thread
From: Leon Cogs @ 2004-01-16 20:49 UTC (permalink / raw)
To: linux-hotplug
John H. wrote:
>gosh, modules with 2.6.1 period are just screwy for me.
>
>
>
>lsomod, locks, modprobe locks, insmod locks.... i have to close their xterm.
>
>anyone have an idea what happened? is it the hotplug script?
>
>_______________________________________________
>No banners. No pop-ups. No kidding.
>Introducing My Way - http://www.myway.com
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: Perforce Software.
>Perforce is the Fast Software Configuration Management System offering
>advanced branching capabilities and atomic changes on 50+ platforms.
>Free Eval! http://www.perforce.com/perforce/loadprog.html
>_______________________________________________
>Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
>Linux-hotplug-devel@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
>
>
>
>
most modules work for me, have you module-init-tool installed. I use
module-init-tools 0.9.14 also use hotplug-2002_08_26-85, Suse 9 pro.
However, printer epson 740 does not load as module and epson perfection
scanner also.
Lmcogs
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread