[PATCH v4 0/3] Improve IPA mechanisms in low temperature state

[PATCH v4 0/3] Improve IPA mechanisms in low temperature state

[Lukasz Luba]

Hi all,

This v4 patch set aims to address the issues present in IPA when the
temperature is below the first trip point and cooling devices are not
throttled.
The last patch 1/3 is co-developed by Daniel, who presented the code
during v2 review. I have created a helper function based on his idea,
which can now be used inside IPA governor lock protected code. 
The patch 2/3 adds a basic check of cooling devices power to keep the
internal statistics fresh. This allows to avoid issue when the statistics
cover very long period, because they were not maintained.
The patch 3/3 addresses an issue described in bugzilla [1], which is:
unnecessary updating cooling devices when their state has not changed
because they are not throttled. This update triggers sending an event,
which should be avoided. Thus, patch 2/3 adds a tracking mechanism if
the update was triggered and makes sure it will be done only once when
the temperature continue to stay below first trip point.

changelog:
v4:
- reordered the patches, patch 3/3 from v3 is now 1/3 
v3:
- new patch 3/3 co-developed with Daniel
v2:
- patch 2/2 uses now simple 'update' bool flag and information from
  'tz->last_temperature'
- patch 1/2 has small change in the comment
- re-based on top of today's thermal/next branch

Regards,
Lukasz Luba

[1] https://bugzilla.kernel.org/show_bug.cgi?id=212501

Lukasz Luba (3):
  thermal: create a helper __thermal_cdev_update() without a lock
  thermal: power_allocator: maintain the device statistics from going
    stale
  thermal: power_allocator: update once cooling devices when temp is low

 drivers/thermal/gov_power_allocator.c | 21 +++++++++++++++++----
 drivers/thermal/thermal_core.h        |  1 +
 drivers/thermal/thermal_helpers.c     | 27 +++++++++++++++++----------
 3 files changed, 35 insertions(+), 14 deletions(-)

-- 
2.17.1

[PATCH v4 1/3] thermal: create a helper __thermal_cdev_update() without a lock

[Lukasz Luba]

There is a need to have a helper function which updates cooling device
state from the governors code. With this change governor can use
lock and unlock while calling helper function. This avoid unnecessary
second time lock/unlock which was in previous solution present in
governor implementation. This new helper function must be called
with mutex 'cdev->lock' hold.

The changed been discussed and part of code presented in thread:
https://lore.kernel.org/linux-pm/20210419084536.25000-1-lukasz.luba@arm.com/

Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
---
 drivers/thermal/thermal_core.h    |  1 +
 drivers/thermal/thermal_helpers.c | 27 +++++++++++++++++----------
 2 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 86b8cef7310e..726e327b4205 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -66,6 +66,7 @@ static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
 }
 
 void thermal_cdev_update(struct thermal_cooling_device *);
+void __thermal_cdev_update(struct thermal_cooling_device *cdev);
 
 /**
  * struct thermal_trip - representation of a point in temperature domain
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index 7f50f412e02a..3edd047e144f 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -192,18 +192,11 @@ static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
 	thermal_cooling_device_stats_update(cdev, target);
 }
 
-void thermal_cdev_update(struct thermal_cooling_device *cdev)
+void __thermal_cdev_update(struct thermal_cooling_device *cdev)
 {
 	struct thermal_instance *instance;
 	unsigned long target = 0;
 
-	mutex_lock(&cdev->lock);
-	/* cooling device is updated*/
-	if (cdev->updated) {
-		mutex_unlock(&cdev->lock);
-		return;
-	}
-
 	/* Make sure cdev enters the deepest cooling state */
 	list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
 		dev_dbg(&cdev->device, "zone%d->target=%lu\n",
@@ -216,11 +209,25 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
 
 	thermal_cdev_set_cur_state(cdev, target);
 
-	cdev->updated = true;
-	mutex_unlock(&cdev->lock);
 	trace_cdev_update(cdev, target);
 	dev_dbg(&cdev->device, "set to state %lu\n", target);
 }
+
+/**
+ * thermal_cdev_update - update cooling device state if needed
+ * @cdev:	pointer to struct thermal_cooling_device
+ *
+ * Update the cooling device state if there is a need.
+ */
+void thermal_cdev_update(struct thermal_cooling_device *cdev)
+{
+	mutex_lock(&cdev->lock);
+	if (!cdev->updated) {
+		__thermal_cdev_update(cdev);
+		cdev->updated = true;
+	}
+	mutex_unlock(&cdev->lock);
+}
 EXPORT_SYMBOL(thermal_cdev_update);
 
 /**
-- 
2.17.1

[thermal: thermal/next] thermal/core: Create a helper __thermal_cdev_update() without a lock

[thermal-bot for Lukasz Luba]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     b70dbf40eb075c596d86c42d93b86ff502290fc5
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//b70dbf40eb075c596d86c42d93b86ff502290fc5
Author:        Lukasz Luba <lukasz.luba@arm.com>
AuthorDate:    Thu, 22 Apr 2021 12:43:06 +01:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 22 Apr 2021 14:10:28 +02:00

thermal/core: Create a helper __thermal_cdev_update() without a lock

There is a need to have a helper function which updates cooling device
state from the governors code. With this change governor can use
lock and unlock while calling helper function. This avoid unnecessary
second time lock/unlock which was in previous solution present in
governor implementation. This new helper function must be called
with mutex 'cdev->lock' hold.

The changed been discussed and part of code presented in thread:
https://lore.kernel.org/linux-pm/20210419084536.25000-1-lukasz.luba@arm.com/

Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210422114308.29684-2-lukasz.luba@arm.com
---
 drivers/thermal/thermal_core.h    |  1 +
 drivers/thermal/thermal_helpers.c | 27 +++++++++++++++++----------
 2 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 86b8cef..726e327 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -66,6 +66,7 @@ static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
 }
 
 void thermal_cdev_update(struct thermal_cooling_device *);
+void __thermal_cdev_update(struct thermal_cooling_device *cdev);
 
 /**
  * struct thermal_trip - representation of a point in temperature domain
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index 7f50f41..3edd047 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -192,18 +192,11 @@ static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
 	thermal_cooling_device_stats_update(cdev, target);
 }
 
-void thermal_cdev_update(struct thermal_cooling_device *cdev)
+void __thermal_cdev_update(struct thermal_cooling_device *cdev)
 {
 	struct thermal_instance *instance;
 	unsigned long target = 0;
 
-	mutex_lock(&cdev->lock);
-	/* cooling device is updated*/
-	if (cdev->updated) {
-		mutex_unlock(&cdev->lock);
-		return;
-	}
-
 	/* Make sure cdev enters the deepest cooling state */
 	list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
 		dev_dbg(&cdev->device, "zone%d->target=%lu\n",
@@ -216,11 +209,25 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
 
 	thermal_cdev_set_cur_state(cdev, target);
 
-	cdev->updated = true;
-	mutex_unlock(&cdev->lock);
 	trace_cdev_update(cdev, target);
 	dev_dbg(&cdev->device, "set to state %lu\n", target);
 }
+
+/**
+ * thermal_cdev_update - update cooling device state if needed
+ * @cdev:	pointer to struct thermal_cooling_device
+ *
+ * Update the cooling device state if there is a need.
+ */
+void thermal_cdev_update(struct thermal_cooling_device *cdev)
+{
+	mutex_lock(&cdev->lock);
+	if (!cdev->updated) {
+		__thermal_cdev_update(cdev);
+		cdev->updated = true;
+	}
+	mutex_unlock(&cdev->lock);
+}
 EXPORT_SYMBOL(thermal_cdev_update);
 
 /**

[PATCH v4 2/3] thermal: power_allocator: maintain the device statistics from going stale

[Lukasz Luba]

When the temperature is below the first activation trip point the cooling
devices are not checked, so they cannot maintain fresh statistics. It
leads into the situation, when temperature crosses first trip point, the
statistics are stale and show state for very long period. This has impact
on IPA algorithm calculation and wrong decisions. Thus, check the cooling
devices even when the temperature is low, to refresh these statistics.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
---
 drivers/thermal/gov_power_allocator.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 2802a0e13c88..d393409fb786 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -575,15 +575,25 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
 {
 	struct thermal_instance *instance;
 	struct power_allocator_params *params = tz->governor_data;
+	u32 req_power;
 
 	mutex_lock(&tz->lock);
 	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		struct thermal_cooling_device *cdev = instance->cdev;
+
 		if ((instance->trip != params->trip_max_desired_temperature) ||
 		    (!cdev_is_power_actor(instance->cdev)))
 			continue;
 
 		instance->target = 0;
 		mutex_lock(&instance->cdev->lock);
+		/*
+		 * Call for updating the cooling devices local stats and avoid
+		 * periods of dozen of seconds when those have not been
+		 * maintained.
+		 */
+		cdev->ops->get_requested_power(cdev, &req_power);
+
 		instance->cdev->updated = false;
 		mutex_unlock(&instance->cdev->lock);
 		thermal_cdev_update(instance->cdev);
-- 
2.17.1

[thermal: thermal/next] thermal/core/power_allocator: Maintain the device statistics from going stale

[thermal-bot for Lukasz Luba]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     d3b60ed9b135e2c652115db691a87dc28b324bea
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//d3b60ed9b135e2c652115db691a87dc28b324bea
Author:        Lukasz Luba <lukasz.luba@arm.com>
AuthorDate:    Thu, 22 Apr 2021 12:43:07 +01:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 22 Apr 2021 23:50:49 +02:00

thermal/core/power_allocator: Maintain the device statistics from going stale

When the temperature is below the first activation trip point the cooling
devices are not checked, so they cannot maintain fresh statistics. It
leads into the situation, when temperature crosses first trip point, the
statistics are stale and show state for very long period. This has impact
on IPA algorithm calculation and wrong decisions. Thus, check the cooling
devices even when the temperature is low, to refresh these statistics.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422114308.29684-3-lukasz.luba@arm.com
---
 drivers/thermal/gov_power_allocator.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 2802a0e..d393409 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -575,15 +575,25 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
 {
 	struct thermal_instance *instance;
 	struct power_allocator_params *params = tz->governor_data;
+	u32 req_power;
 
 	mutex_lock(&tz->lock);
 	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		struct thermal_cooling_device *cdev = instance->cdev;
+
 		if ((instance->trip != params->trip_max_desired_temperature) ||
 		    (!cdev_is_power_actor(instance->cdev)))
 			continue;
 
 		instance->target = 0;
 		mutex_lock(&instance->cdev->lock);
+		/*
+		 * Call for updating the cooling devices local stats and avoid
+		 * periods of dozen of seconds when those have not been
+		 * maintained.
+		 */
+		cdev->ops->get_requested_power(cdev, &req_power);
+
 		instance->cdev->updated = false;
 		mutex_unlock(&instance->cdev->lock);
 		thermal_cdev_update(instance->cdev);

[PATCH v4 3/3] thermal: power_allocator: update once cooling devices when temp is low

[Lukasz Luba]

The cooling device state change generates an event, also when there is no
need, because temperature is low and device is not throttled. Avoid to
unnecessary update the cooling device which means also not sending event.
The cooling device state has not changed because the temperature is still
below the first activation trip point value, so we can do this.
Add a tracking mechanism to make sure it updates cooling devices only
once - when the temperature dropps below first trip point.

Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
---
 drivers/thermal/gov_power_allocator.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index d393409fb786..a6cdb2e892da 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -571,7 +571,7 @@ static void reset_pid_controller(struct power_allocator_params *params)
 	params->prev_err = 0;
 }
 
-static void allow_maximum_power(struct thermal_zone_device *tz)
+static void allow_maximum_power(struct thermal_zone_device *tz, bool update)
 {
 	struct thermal_instance *instance;
 	struct power_allocator_params *params = tz->governor_data;
@@ -594,9 +594,10 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
 		 */
 		cdev->ops->get_requested_power(cdev, &req_power);
 
-		instance->cdev->updated = false;
+		if (update)
+			__thermal_cdev_update(instance->cdev);
+
 		mutex_unlock(&instance->cdev->lock);
-		thermal_cdev_update(instance->cdev);
 	}
 	mutex_unlock(&tz->lock);
 }
@@ -710,6 +711,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
 	int ret;
 	int switch_on_temp, control_temp;
 	struct power_allocator_params *params = tz->governor_data;
+	bool update;
 
 	/*
 	 * We get called for every trip point but we only need to do
@@ -721,9 +723,10 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
 	ret = tz->ops->get_trip_temp(tz, params->trip_switch_on,
 				     &switch_on_temp);
 	if (!ret && (tz->temperature < switch_on_temp)) {
+		update = (tz->last_temperature >= switch_on_temp);
 		tz->passive = 0;
 		reset_pid_controller(params);
-		allow_maximum_power(tz);
+		allow_maximum_power(tz, update);
 		return 0;
 	}
 
-- 
2.17.1

[thermal: thermal/next] thermal/core/power_allocator: Update once cooling devices when temp is low

[thermal-bot for Lukasz Luba]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     0952177f2a1f63ba87a1940fac21768f402c0b94
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//0952177f2a1f63ba87a1940fac21768f402c0b94
Author:        Lukasz Luba <lukasz.luba@arm.com>
AuthorDate:    Thu, 22 Apr 2021 12:43:08 +01:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 22 Apr 2021 23:51:14 +02:00

thermal/core/power_allocator: Update once cooling devices when temp is low

The cooling device state change generates an event, also when there is no
need, because temperature is low and device is not throttled. Avoid to
unnecessary update the cooling device which means also not sending event.
The cooling device state has not changed because the temperature is still
below the first activation trip point value, so we can do this.
Add a tracking mechanism to make sure it updates cooling devices only
once - when the temperature dropps below first trip point.

Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422114308.29684-4-lukasz.luba@arm.com
---
 drivers/thermal/gov_power_allocator.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index d393409..a6cdb2e 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -571,7 +571,7 @@ static void reset_pid_controller(struct power_allocator_params *params)
 	params->prev_err = 0;
 }
 
-static void allow_maximum_power(struct thermal_zone_device *tz)
+static void allow_maximum_power(struct thermal_zone_device *tz, bool update)
 {
 	struct thermal_instance *instance;
 	struct power_allocator_params *params = tz->governor_data;
@@ -594,9 +594,10 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
 		 */
 		cdev->ops->get_requested_power(cdev, &req_power);
 
-		instance->cdev->updated = false;
+		if (update)
+			__thermal_cdev_update(instance->cdev);
+
 		mutex_unlock(&instance->cdev->lock);
-		thermal_cdev_update(instance->cdev);
 	}
 	mutex_unlock(&tz->lock);
 }
@@ -710,6 +711,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
 	int ret;
 	int switch_on_temp, control_temp;
 	struct power_allocator_params *params = tz->governor_data;
+	bool update;
 
 	/*
 	 * We get called for every trip point but we only need to do
@@ -721,9 +723,10 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
 	ret = tz->ops->get_trip_temp(tz, params->trip_switch_on,
 				     &switch_on_temp);
 	if (!ret && (tz->temperature < switch_on_temp)) {
+		update = (tz->last_temperature >= switch_on_temp);
 		tz->passive = 0;
 		reset_pid_controller(params);
-		allow_maximum_power(tz);
+		allow_maximum_power(tz, update);
 		return 0;
 	}
 

Re: [PATCH v4 0/3] Improve IPA mechanisms in low temperature state

[Daniel Lezcano]

On 22/04/2021 13:43, Lukasz Luba wrote:
> Hi all,
> 
> This v4 patch set aims to address the issues present in IPA when the
> temperature is below the first trip point and cooling devices are not
> throttled.
> The last patch 1/3 is co-developed by Daniel, who presented the code
> during v2 review. I have created a helper function based on his idea,
> which can now be used inside IPA governor lock protected code. 
> The patch 2/3 adds a basic check of cooling devices power to keep the
> internal statistics fresh. This allows to avoid issue when the statistics
> cover very long period, because they were not maintained.
> The patch 3/3 addresses an issue described in bugzilla [1], which is:
> unnecessary updating cooling devices when their state has not changed
> because they are not throttled. This update triggers sending an event,
> which should be avoided. Thus, patch 2/3 adds a tracking mechanism if
> the update was triggered and makes sure it will be done only once when
> the temperature continue to stay below first trip point.
> 
> changelog:
> v4:
> - reordered the patches, patch 3/3 from v3 is now 1/3 
> v3:
> - new patch 3/3 co-developed with Daniel
> v2:
> - patch 2/2 uses now simple 'update' bool flag and information from
>   'tz->last_temperature'
> - patch 1/2 has small change in the comment
> - re-based on top of today's thermal/next branch
> 
> Regards,
> Lukasz Luba
> 
> [1] https://bugzilla.kernel.org/show_bug.cgi?id=212501
> 
> Lukasz Luba (3):
>   thermal: create a helper __thermal_cdev_update() without a lock
>   thermal: power_allocator: maintain the device statistics from going
>     stale
>   thermal: power_allocator: update once cooling devices when temp is low
> 
>  drivers/thermal/gov_power_allocator.c | 21 +++++++++++++++++----
>  drivers/thermal/thermal_core.h        |  1 +
>  drivers/thermal/thermal_helpers.c     | 27 +++++++++++++++++----------
>  3 files changed, 35 insertions(+), 14 deletions(-)

Applied, thanks


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v4 0/3] Improve IPA mechanisms in low temperature state

[Lukasz Luba]

On 4/22/21 6:30 PM, Daniel Lezcano wrote:
> On 22/04/2021 13:43, Lukasz Luba wrote:
>> Hi all,
>>
>> This v4 patch set aims to address the issues present in IPA when the
>> temperature is below the first trip point and cooling devices are not
>> throttled.
>> The last patch 1/3 is co-developed by Daniel, who presented the code
>> during v2 review. I have created a helper function based on his idea,
>> which can now be used inside IPA governor lock protected code.
>> The patch 2/3 adds a basic check of cooling devices power to keep the
>> internal statistics fresh. This allows to avoid issue when the statistics
>> cover very long period, because they were not maintained.
>> The patch 3/3 addresses an issue described in bugzilla [1], which is:
>> unnecessary updating cooling devices when their state has not changed
>> because they are not throttled. This update triggers sending an event,
>> which should be avoided. Thus, patch 2/3 adds a tracking mechanism if
>> the update was triggered and makes sure it will be done only once when
>> the temperature continue to stay below first trip point.
>>
>> changelog:
>> v4:
>> - reordered the patches, patch 3/3 from v3 is now 1/3
>> v3:
>> - new patch 3/3 co-developed with Daniel
>> v2:
>> - patch 2/2 uses now simple 'update' bool flag and information from
>>    'tz->last_temperature'
>> - patch 1/2 has small change in the comment
>> - re-based on top of today's thermal/next branch
>>
>> Regards,
>> Lukasz Luba
>>
>> [1] https://bugzilla.kernel.org/show_bug.cgi?id=212501
>>
>> Lukasz Luba (3):
>>    thermal: create a helper __thermal_cdev_update() without a lock
>>    thermal: power_allocator: maintain the device statistics from going
>>      stale
>>    thermal: power_allocator: update once cooling devices when temp is low
>>
>>   drivers/thermal/gov_power_allocator.c | 21 +++++++++++++++++----
>>   drivers/thermal/thermal_core.h        |  1 +
>>   drivers/thermal/thermal_helpers.c     | 27 +++++++++++++++++----------
>>   3 files changed, 35 insertions(+), 14 deletions(-)
> 
> Applied, thanks
> 
> 

Thank you Daniel!

Regards,
Lukasz