All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rene Herman <rene.herman@keyaccess.nl>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: Re: snd-es1968 (+ snd-cs4236) trouble
Date: Wed, 14 Dec 2005 05:55:13 +0100	[thread overview]
Message-ID: <439FA5B1.8000601@keyaccess.nl> (raw)
In-Reply-To: <439F2E13.7070405@keyaccess.nl>

[-- Attachment #1: Type: text/plain, Size: 529 bytes --]

Rene Herman wrote:

> I'll poke around some more to confirm the documentation was right about 
> the Legacy Audio bit. I see the SB-EMU can be set to 0x240 and that's 
> free here, so I'll try and see for which setting of the bit something 
> appears there.

Managed to already. Yes, confirmed, the documentation was right. snd-sb8 
actually loads for this emulation:

ALSA sound/isa/sb/sb_common.c:130: SB [0x240]: DSP chip found, version = 3.2

So anyways, the submitted patch, re-attached for convenience, was right.

Rene.



[-- Attachment #2: linux-2.6.14.3_es1968_tdma_la_iem.diff --]
[-- Type: text/plain, Size: 1726 bytes --]

--- linux-2.6.14.3-local-wc/sound/pci/es1968.c.orig	2005-12-13 07:25:47.000000000 +0100
+++ linux-2.6.14.3-local-wc/sound/pci/es1968.c	2005-12-13 07:26:04.000000000 +0100
@@ -176,7 +176,7 @@ MODULE_PARM_DESC(joystick, "Enable joyst
 
 /* Values for the ESM_LEGACY_AUDIO_CONTROL */
 
-#define ESS_ENABLE_AUDIO	0x8000
+#define ESS_DISABLE_AUDIO	0x8000
 #define ESS_ENABLE_SERIAL_IRQ	0x4000
 #define IO_ADRESS_ALIAS		0x0020
 #define MPU401_IRQ_ENABLE	0x0010
@@ -195,7 +195,7 @@ MODULE_PARM_DESC(joystick, "Enable joyst
 #define DMA_TDMA		0x0100
 #define DMA_PCPCI		0x0200
 #define POST_WRITE		0x0080
-#define ISA_TIMING		0x0040
+#define PCI_TIMING		0x0040
 #define SWAP_LR			0x0020
 #define SUBTR_DECODE		0x0002
 
@@ -2197,14 +2197,11 @@ static void snd_es1968_chip_init(es1968_
 	/* Config Reg A */
 	pci_read_config_word(pci, ESM_CONFIG_A, &w);
 
-	/*      Use TDMA for now. TDMA works on all boards, so while its
-	 *      not the most efficient its the simplest. */
 	w &= ~DMA_CLEAR;	/* Clear DMA bits */
-	w |= DMA_TDMA;		/* TDMA on */
 	w &= ~(PIC_SNOOP1 | PIC_SNOOP2);	/* Clear Pic Snoop Mode Bits */
 	w &= ~SAFEGUARD;	/* Safeguard off */
 	w |= POST_WRITE;	/* Posted write */
-	w |= ISA_TIMING;	/* ISA timing on */
+	w |= PCI_TIMING;	/* PCI timing on */
 	/* XXX huh?  claims to be reserved.. */
 	w &= ~SWAP_LR;		/* swap left/right 
 				   seems to only have effect on SB
@@ -2245,7 +2242,7 @@ static void snd_es1968_chip_init(es1968_
 
 	pci_read_config_word(pci, ESM_LEGACY_AUDIO_CONTROL, &w);
 
-	w &= ~ESS_ENABLE_AUDIO;	/* Disable Legacy Audio */
+	w |= ESS_DISABLE_AUDIO;	/* Disable Legacy Audio */
 	w &= ~ESS_ENABLE_SERIAL_IRQ;	/* Disable SIRQ */
 	w &= ~(0x1f);		/* disable mpu irq/io, game port, fm, SB */
 

  reply	other threads:[~2005-12-14  4:51 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-12-10 20:13 snd-es1968 (+ snd-cs4236) trouble Rene Herman
2005-12-11  9:08 ` Sergey Vlasov
2005-12-11 15:16   ` Rene Herman
2005-12-12 11:58 ` Takashi Iwai
2005-12-12 22:53   ` Rene Herman
2005-12-13  7:09     ` Rene Herman
2005-12-13 11:04       ` Takashi Iwai
2005-12-13 20:24         ` Rene Herman
2005-12-14  4:55           ` Rene Herman [this message]
2005-12-14 12:00             ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=439FA5B1.8000601@keyaccess.nl \
    --to=rene.herman@keyaccess.nl \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.