From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Simon Horman <horms@verge.net.au>,
Rob Herring <robh+dt@kernel.org>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>, Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v2] arm64: dts: renesas: r8a779{7|8}0: add MSIOF support
Date: Fri, 19 Oct 2018 22:10:44 +0300 [thread overview]
Message-ID: <451b2957-d272-f4e9-8bfc-cb1cdfeb442b@cogentembedded.com> (raw)
In-Reply-To: <fb4eb097-40aa-82df-68c7-9b727c858a8b@cogentembedded.com>
Describe MSIOF in the R8A779{7|8}0 device trees.
The DMA props are omitted for R8A77980 as the RT-DMAC isn't supported
(yet?)...
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
This patch is against the 'renesas-devel-20181015-v4.19-rc8' branch of
Simon Horman's 'renesas.git' repo.
Changes in version 2:
- removed the aliases;
- restored the DMA props on R8A77970, updated the description accordingly;
- mentioned Vladimir in the description and added his signoff;
- refreshed the patch.
arch/arm64/boot/dts/renesas/r8a77970.dtsi | 64 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 52 ++++++++++++++++++++++++
2 files changed, 116 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -753,6 +753,70 @@
status = "disabled";
};
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a77970",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x64>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx", "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a77970",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a77970",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ dmas = <&dmac1 0x45>, <&dmac1 0x44>,
+ <&dmac2 0x45>, <&dmac2 0x44>;
+ dma-names = "tx", "rx", "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a77970",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ dmas = <&dmac1 0x47>, <&dmac1 0x46>,
+ <&dmac2 0x47>, <&dmac2 0x46>;
+ dma-names = "tx", "rx", "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77970";
reg = <0 0xe6ef0000 0 0x1000>;
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -805,6 +805,58 @@
status = "disabled";
};
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a77980",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x64>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a77980",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a77980",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a77980",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77980";
reg = <0 0xe6ef0000 0 0x1000>;
next prev parent reply other threads:[~2018-10-19 19:10 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-27 18:48 [PATCH v2 0/2] Add R8A77980/Condor PCIe support Sergei Shtylyov
2018-08-27 18:48 ` Sergei Shtylyov
2018-08-27 18:48 ` Sergei Shtylyov
2018-08-27 18:52 ` Sergei Shtylyov
2018-08-27 18:52 ` Sergei Shtylyov
2018-08-27 18:52 ` Sergei Shtylyov
2018-08-27 18:53 ` [PATCH v3 1/2] arm64: dts: renesas: r8a77980: add " Sergei Shtylyov
2018-08-27 18:53 ` Sergei Shtylyov
2018-08-27 18:53 ` Sergei Shtylyov
2018-08-30 12:32 ` Simon Horman
2018-08-30 12:32 ` Simon Horman
2018-08-30 12:32 ` Simon Horman
2018-08-27 18:54 ` [PATCH v3 2/2] arm64: dts: renesas: condor: " Sergei Shtylyov
2018-08-27 18:54 ` Sergei Shtylyov
2018-08-27 18:54 ` Sergei Shtylyov
2018-08-30 12:32 ` Simon Horman
2018-08-30 12:32 ` Simon Horman
2018-08-30 12:32 ` Simon Horman
2018-09-06 17:02 ` [PATCH] arm64: dts: renesas: r8a779{7|8}0: add CMT support Sergei Shtylyov
2018-09-06 18:43 ` Sergei Shtylyov
2018-09-07 18:58 ` [PATCH v2] " Sergei Shtylyov
2018-09-10 9:05 ` Simon Horman
2018-09-19 7:47 ` Geert Uytterhoeven
2018-09-19 9:19 ` Simon Horman
2018-09-07 20:14 ` [PATCH] arm64: dts: renesas: r8a779{7|8}0: add TMU support Sergei Shtylyov
2018-09-10 9:23 ` Simon Horman
2018-09-10 12:04 ` Sergei Shtylyov
2018-09-11 13:36 ` Simon Horman
2018-09-11 14:12 ` Geert Uytterhoeven
2018-09-11 18:35 ` Sergei Shtylyov
2018-09-12 9:39 ` Simon Horman
2018-09-13 20:29 ` Sergei Shtylyov
2018-09-13 20:14 ` Sergei Shtylyov
2018-09-19 20:02 ` [PATCH] arm64: dts: renesas: r8a779{7|8}0: add TPU support Sergei Shtylyov
2018-09-19 20:21 ` Sergei Shtylyov
2018-09-21 7:35 ` Simon Horman
2018-09-21 8:27 ` Sergei Shtylyov
2018-09-22 20:30 ` [PATCH v2] " Sergei Shtylyov
2018-09-24 9:07 ` Simon Horman
2018-09-24 14:44 ` Sergei Shtylyov
2018-09-24 15:32 ` Simon Horman
2018-09-24 11:29 ` Geert Uytterhoeven
2018-09-24 17:55 ` Sergei Shtylyov
2018-09-24 18:33 ` [PATCH v3] " Sergei Shtylyov
2018-09-24 19:36 ` Geert Uytterhoeven
2018-09-25 7:42 ` Simon Horman
2018-09-24 20:13 ` [PATCH v2] arm64: dts: renesas: r8a779{7|8}0: add TMU support Sergei Shtylyov
2018-10-18 18:32 ` Sergei Shtylyov
2018-10-19 13:43 ` Simon Horman
2018-10-01 20:25 ` [PATCH] arm64: dts: renesas: r8a779{7|8}0: add PWM support Sergei Shtylyov
2018-10-02 7:16 ` Geert Uytterhoeven
2018-10-04 9:33 ` Simon Horman
2018-10-05 19:25 ` [PATCH] arm64: dts: renesas: r8a77970: add thermal support Sergei Shtylyov
2018-10-05 19:33 ` Sergei Shtylyov
2018-10-08 7:55 ` Simon Horman
2018-10-08 8:12 ` Geert Uytterhoeven
2018-10-08 16:35 ` Sergei Shtylyov
2018-10-08 16:40 ` Geert Uytterhoeven
2018-10-08 18:04 ` Sergei Shtylyov
2018-10-10 7:10 ` Geert Uytterhoeven
2018-10-09 19:37 ` [PATCH] arm64: dts: renesas: r8a77980: " Sergei Shtylyov
2018-10-10 8:36 ` Simon Horman
2018-10-10 10:47 ` Sergei Shtylyov
2018-10-10 10:52 ` Niklas Söderlund
2018-10-10 10:57 ` Niklas Söderlund
2018-10-10 11:20 ` Sergei Shtylyov
2018-10-09 19:47 ` [PATCH v2] arm64: dts: renesas: r8a77970: " Sergei Shtylyov
2018-10-10 7:12 ` Geert Uytterhoeven
2018-10-12 11:21 ` Simon Horman
2018-10-12 14:36 ` Sergei Shtylyov
2018-10-15 15:43 ` Simon Horman
2018-10-10 19:18 ` [PATCH v2] arm64: dts: renesas: r8a77980: " Sergei Shtylyov
2018-10-10 22:11 ` Niklas Söderlund
2018-10-11 7:02 ` Geert Uytterhoeven
2018-10-11 7:30 ` Niklas Söderlund
2018-10-12 11:23 ` Simon Horman
2018-10-16 19:36 ` [PATCH] arm64: dts: renesas: r8a779{7|8}0: add MSIOF support Sergei Shtylyov
2018-10-17 8:12 ` Simon Horman
2018-10-17 8:52 ` Geert Uytterhoeven
2018-10-18 12:45 ` Simon Horman
2018-10-18 16:48 ` [PATCH] arm64: dts: renesas: condor: switch from EtherAVB to GEther Sergei Shtylyov
2018-10-31 14:30 ` Simon Horman
2018-10-31 17:29 ` Sergei Shtylyov
2018-11-02 11:25 ` Simon Horman
2018-10-19 19:10 ` Sergei Shtylyov [this message]
2018-10-29 10:24 ` [PATCH v2] arm64: dts: renesas: r8a779{7|8}0: add MSIOF support Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=451b2957-d272-f4e9-8bfc-cb1cdfeb442b@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.