* mmotm 2009-02-10-16-35 uploaded @ 2009-02-11 0:36 akpm 2009-02-11 8:44 ` Jiri Slaby ` (5 more replies) 0 siblings, 6 replies; 44+ messages in thread From: akpm @ 2009-02-11 0:36 UTC (permalink / raw) To: mm-commits, linux-kernel The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to http://userweb.kernel.org/~akpm/mmotm/ and will soon be available at git://git.zen-sources.org/zen/mmotm.git It contains the following patches against 2.6.29-rc4: origin.patch migration-migrate_vmas-should-check-vma.patch rtc-update-maintainership-of-pxa-rtc-driver.patch lxfb-properly-alloc-cmap-in-all-cases-and-dont-leak-the-memory.patch gxfb-properly-alloc-cmap-and-plug-cmap-leak.patch gx1fb-properly-alloc-cmap-and-plug-cmap-leak.patch mm-fix-dirty_bytes-dirty_background_bytes-sysctls-on-64bit-arches.patch mm-fix-dirty_bytes-dirty_background_bytes-sysctls-on-64bit-arches-fix.patch jbd-fix-return-value-of-journal_start_commit.patch revert-ext3-wait-on-all-pending-commits-in-ext3_sync_fs.patch mm-fix-mlocked-page-counter-mismatch.patch tpm-correct-email-address-for-tpm_infineon-driver.patch video-framebuffer-move-the-probe-func-into-devinittext-in-blackfin-lcd-driver.patch memcg-use-__gfp_nowarn-in-page-cgroup-allocation.patch kernel-doc-preferred-ending-marker-and-examples.patch kernel-doc-fix-syscall-wrapper-processing.patch rtc-t-reaches-1-tested-0.patch cgroups-add-li-zefan-as-a-maintainer.patch futex-fix-reference-leak.patch vfs-separate-fmode_pread-fmode_pwrite-into-separate-flags.patch vfs-separate-fmode_pread-fmode_pwrite-into-separate-flags-fix.patch seq_file-properly-cope-with-pread.patch seq_file-properly-cope-with-pread-fix.patch i-need-old-gcc.patch i2c-too-much-compiler-noise.patch repeatable-slab-corruption-with-ltp-msgctl08.patch linux-next.patch next-remove-localversion.patch fix-sparseirq-use-kstat_irqs_cpu-on-non-x86-architectures-too.patch acpi-check-_pss-invalidation-when-bios-report-_pss-with-all-0x80000000.patch acpi-fix-of-pmtimer-overflow-that-make-cx-states-time-incorrect.patch mm-only-enforce-acpi-resource-conflict-checks.patch thinkpad-acpi-split-delayed-leds-stuff-clean-up-code.patch thinkpad-acpi-split-delayed-leds-stuff-clean-up-code-checkpatch-fixes.patch x86-simplify-highmem-related-kconfig-entries.patch x86-define-arch_want_frame_pointers.patch x86-define-arch_want_frame_pointers-fix.patch eeepc-should-depend-on-input.patch uv-fix-header-struct-usage.patch sgi-ia64-uv-fix-ia64-build-error-in-the-linux-next-tree.patch kgdb-fix-kernel-doc-error.patch intel-agp-fix-a-panic-with-1m-of-shared-memory-no-gtt-entries.patch agpgart-detected-ali-m-chipset-with-m1621.patch arm-fix-for-atmel-at91-powersaving.patch auditsc-fix-kernel-doc-notation.patch audit-execve-record-remove-bogus-newline.patch kernel-auditscc-fix-warning.patch pcmcia-pccard-deadlock-fix.patch arch-powerpc-eliminate-double-sizeof.patch arch-powerpc-eliminate-double-sizeof-checkpatch-fixes.patch drivers-consolidate-driver_probe_done-loops-into-one-place.patch drivers-consolidate-driver_probe_done-loops-into-one-place-fix.patch drivers-consolidate-driver_probe_done-loops-into-one-place-checkpatch-fixes.patch resume-wait-for-device-probing-to-finish.patch sysfs-reference-sysfs_dirent-from-sysfs-inodes.patch sysfs-reference-sysfs_dirent-from-sysfs-inodes-fix.patch early-platform-driver-v3.patch early-platform-driver-v3-checkpatch-fixes.patch drm-fix-lock_test_with_return-macro.patch dvb-negative-internal-sub_range-wont-get-noticed.patch dvb-fix-kconfig-typo.patch i2c-incremental-i2c-mpc-driver-fix-for-multi-master-i2c-busses.patch i2c-fix-i2c-mpc-driver-for-multi-master-i2c-busses.patch clocksource-pass-clocksource-to-read-callback.patch clocksource-pass-clocksource-to-read-callback-fix.patch clocksource-add-enable-and-disable-callbacks.patch clocksource-sanity-check-sysfs-clocksource-changes.patch input-touchscreen-driver-add-support-ad7877-touchscreen-driver.patch input-mousedev-distinguish-a-moving-finger-from-a-tapping-finger.patch input-ad7879-touchscreen-driver.patch input-ad7879-touchscreen-driver-dont-use-bus_id.patch input-mouse-alpsc-handle-touchpoints-buttons-correctly.patch input-ads7846c-sparse-lock-annotation.patch drivers-input-keyboard-atkbdc-use-function-for-generation-of-keyrelease-events.patch drivers-input-keyboard-atkbdc-fujitsu-siemens-amilo-pa-1510-quirks.patch input-bcm5974-prepare-for-a-new-trackpad-header-type.patch input-bcm5974-add-quad-finger-tapping.patch input-bcm5974-add-support-for-the-macbook-5-unibody.patch input-bcm5974-augmented-debug-information.patch input-bcm5974-declare-alignment-usage.patch input-bcm5974-declare-alignment-usage-checkpatch-fixes.patch input-allow-certain-ev_abs-events-to-bypass-all-filtering.patch es-input-allow-certain-ev_abs-events-to-bypass-all-filtering-fix.patch input-add-a-detailed-multi-touch-finger-data-report-protocol-rev2.patch input-keyboard-hilkbdc-fix-crash-when-removing-hilkbd-module.patch drivers-input-serio-hp_sdcc-fix-crash-when-removing-hp_sdc-module.patch ads7846-pin-change-interrupt-support.patch input-elantech-touchpad-driver-miss-recognising-logitech-mice.patch tags-fix-config-symbols-generation.patch dmar-fix-endless-unknown-dmar-structure-type-loop.patch leds-simple-driver-for-pwm-driven-leds.patch leds-fix-confusion.patch sm501-fix-section-mismatches.patch mmc-s3cmci-fix-hangup-in-do_pio_write.patch mmc-add-modalias-linkage-for-mmc-sd-devices.patch mmc-add-extended-csd-as-a-device-attribute.patch mmc-add-extended-csd-as-a-device-attribute-update.patch blackfin-nfc-driver-do-not-clobber-dmac1_perimux.patch blackfin-nfc-driver-mark-bf5xx_nand_add_partition-as-__devinit.patch blackfin-nfc-driver-drop-pointless-casts-with-set_dma_callback.patch jffs2-force-the-jffs2-gc-daemon-to-behave-a-bit-better.patch mtd-txx9-add-ndfmc-support.patch mtd-rbtx4939-add-mtd-support.patch mtd-rbtx4939-add-mtd-support-fix.patch mtd-txx9-soc-nand-flash-memory-controller-driver.patch mtd-txx9-soc-nand-flash-memory-controller-driver-v3.patch mtd-rbtx4939-map-driver-v2.patch fs-jffs2-mallocc-kmem_cache_alloc-memset-kmem_cache_zalloc.patch sfc-modify-allocation-error-message.patch forcedeth-fix-mac-address-detection-on-network-card-regression-in-2623.patch de2104x-support-for-systems-lacking-cache-coherence.patch e1000e-make-e1000e-default-to-the-same-kconfig-setting-as-e1000.patch 3x59x-fix-pci-resource-management.patch gpio_free-might-sleep-blackfin-architecture.patch bluetooth-bt3c-eliminate-a-sparse-warning.patch bluetooth-config_debug_lock_alloc-ifdefs-remove.patch ext4-allocate-s_blockgroup_lock-separately.patch ext4-dont-inherit-inappropriate-inode-flags-from-parent.patch ext4-tighten-restrictions-on-inode-flags.patch pci-quirks-unhide-overflow-device-on-i828675p-pe-chipsets.patch pci-quirks-hp-hides-smbus-controller-in-compaq-nx9500-laptops.patch pci-constify-pci_bus_assign_resources.patch pci-constify-pci_bus_assign_resources-fix.patch pci-constify-pci_bus_add_devices.patch pci-quirks-dont-mark-one-netmos-as-class-other.patch pci-fix-romc-kernel-doc-warning.patch irq-free-setup_irq-interrupt-using-free_irq.patch if-0-ses_match_host.patch scsi-replace-__inline-with-inline.patch mpt-remove-unused-struct-mpt_proc_entry_t.patch scsi-use-the-common-hex_asc-array-rather-than-a-private-one.patch drivers-scsi-a2091c-make-2-functions-static.patch drivers-scsi-a3000c-make-2-functions-static.patch scsi-gdthc-use-unaligned-access-helpers.patch scsi-annotate-gdth_rdcap_data-gdth_rdcap16_data-endianness.patch esp-fix-section-mismatch-warning.patch sg_io-dont-perform-unneeded-copy-in-compat-code.patch scsi-used-kmem_cache_zalloc-instead-of-kmem_cache_alloc-memset.patch paride-pgc-xs-confusion.patch cciss-pci-power-management-reset-for-kexec.patch cciss-pci-power-management-reset-for-kexec-cleanup.patch radio-si470x-add-usb-id-for-dealextreme-usb-radio.patch usb-another-unusual_devs-entry-for-another-bad-argosy-storage-device.patch usb-kill-prehistorical-comments-about-usb_ehci_hcd.patch vfs-fix-vfs_rename_dir-for-fs_rename_does_d_move-filesystems.patch raw-fix-rawctl-compat-ioctls-breakage-on-amd64-and-itanic.patch vfs-update-fsh-to-use-inline-functions-when-no-file-locking-set.patch vfs-further-changes-from-macro-to-inline-function-in-fsh.patch vfs-simple_set_mnt-should-return-void.patch vfs-simple_set_mnt-should-return-void-fix.patch proc-tty-add-struct-tty_operations-proc_fops.patch proc-tty-switch-cyclades-to-proc_fops.patch proc-tty-switch-ip2-to-proc_fops.patch proc-tty-switch-istallion-to-proc_fops.patch proc-tty-switch-synclink_cs-to-proc_fops.patch proc-tty-switch-stallion-to-proc_fops.patch proc-tty-switch-synclink-to-proc_fops.patch proc-tty-switch-synclink_gt-to-proc_fops.patch proc-tty-switch-synclinkmp-to-proc_fops.patch proc-tty-switch-sdio_uart-to-proc_fops.patch proc-tty-switch-serial_core-to-proc_fops.patch proc-tty-switch-usb-serial-to-proc_fops.patch proc-tty-switch-ircomm-to-proc_fops.patch proc-tty-switch-amiserial-to-proc_fops.patch proc-tty-switch-ia64-simserial-to-proc_fops.patch proc-tty-switch-xtensa-iss-console-to-proc_fops.patch proc-tty-remove-struct-tty_operations-read_proc.patch tty-pty-lookup-retval-fixup.patch __tty_open-use-the-correct-type-for-saved_flags.patch mm.patch cgroups-fix-lockdep-subclasses-overflow.patch ext2-xip-refuse-to-change-xip-flag-during-remount-with-busy-inodes.patch ext2-xip-refuse-to-change-xip-flag-during-remount-with-busy-inodes-fix.patch syscall-define-fix-uml-compile-bug.patch writeback-fix-break-condition.patch writeback-fix-break-condition-checkpatch-fixes.patch ptrace-fix-the-usage-of-ptrace_fork.patch parport-parport_serial-dont-bind-netmos-ibm-0299.patch mm-rearrange-exit_mmap-to-unlock-before-arch_exit_mmap.patch nbd-fix-i-o-hang-on-disconnected-nbds.patch timerfd-add-flags-check.patch w1-w1-temp-calculation-overflow-fix.patch mm-task-dirty-accounting-fix.patch mm-vmap-fix-overflow.patch aty128fb-properly-save-pci-state-before-changing-pci-pm-level-fix.patch bitmap-fix-size-test-in-bitmap_find_free_region.patch vfs-check-bh-b_blocknr-only-if-bh_mapped-is-set.patch rtc-add-ds1685-ds1687-rtc-driver.patch ext2-add-blk_issue_flush-to-syncing-paths.patch max3100-spi-uart-driver.patch scsi-dpt_i2o-is-bust-on-ia64.patch arm-at91-fix-nr_aic_irqs-undeclared.patch drivers-ata-sata_silc-needs-dmih.patch pata_amd-program-fifo.patch pata_legacy-for-vlb-32bit-pio-dont-try-tricks-with-slop.patch pata_it821x-resume-from-hibernation-fails-with-raid-volume.patch atmel-mci-fix-initialization-of-dma-slave-data.patch atmel_spi-fix-handling-of-chipselect-after-spi-transfer.patch pcf50633_charger-fix-typo.patch ir-kbd-i2c-support-hauppauge-hvr-1600-r-c-port.patch input-introduce-a-tougher-i8042reset.patch input-add-a-dmi-table-for-the-i8042reset-option-make-msi-wind-u-100-work.patch input-add-a-dmi-table-for-the-i8042reset-option-make-msi-wind-u-100-work-fix.patch bootgraph-fix-for-use-with-dot-symbols.patch mfd-pcf50633-terminate-i2c_device_id-list.patch omap-mmc-recover-from-transfer-failures-resend.patch omap-mmc-replace-infinite-loops-with-timeouts.patch mtd-physmap-fix-wrong-free-and-del_mtd_partitiondevice.patch mtd-maps-blackfin-async-flash-maps-fix-bug-dont-leak-resources-when-initializing-in-case-of-errors.patch mtd-maps-blackfin-async-flash-maps-bfin-async-mtd-driver-needs-complex-mappings.patch mtd-maps-blackfin-async-flash-maps-fix-up-memory-leak.patch net-dont-use-in_atomic-in-gfp_any.patch documentation-connector-cn_testc-dont-use-gfp_any.patch nommu-fix-a-number-of-issues-with-the-per-mm-vma-patch.patch pci-msi-fix-msi_mask.patch floppy-request-only-the-ports-we-actually-use.patch floppy-request-only-the-ports-we-actually-use-fix.patch drivers-scsi-correct-use-of-and.patch mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch scsi-mpt-suppress-debugobjects-warning.patch atmel_serial-might-lose-modem-status-change.patch 8250-fix-boot-hang-with-serial-console-when-using-with-serial-over-lan-port.patch 8250-fix-boot-hang-with-serial-console-when-using-with-serial-over-lan-port-fix.patch pipe_rdwr_fasync-fix-the-error-handling-to-prevent-the-leak-crash.patch devpts-must-release-s_umount-on-error.patch fs-make-struct-dentry-d_op-const.patch vfs-add-missing-unlock-in-sget.patch xtensa-fix-compilation-somewhat.patch mm-mminit_validate_memmodel_limits-get-rid-of-redundant-test.patch vmap-remove-needless-lock-and-list-in-vmap.patch oom_kill-dont-call-for-int_sqrt0.patch page_fault-retry-with-nopage_retry.patch page_fault-retry-with-nopage_retry-fix.patch page_fault-retry-with-nopage_retry-fix-fix.patch radix-tree-gang-set-if-tagged-operation.patch mm-shmemc-fix-division-by-zero.patch mm-fix-pdflush-thread-creation-upper-bound.patch mm-add-proc-controls-for-pdflush-threads.patch mm-add-proc-controls-for-pdflush-threads-fix.patch mm-add-proc-controls-for-pdflush-threads-fix-fix.patch get_mm_hiwater_xxx-trivial-s-define-inline.patch mm-get_nid_for_pfn-returns-int.patch proc-pid-maps-dont-show-pgoff-of-pure-anon-vmas.patch proc-pid-maps-dont-show-pgoff-of-pure-anon-vmas-checkpatch-fixes.patch swsusp-clean-up-shrink_all_zones.patch swsusp-dont-fiddle-with-swappiness.patch vmscan-rename-scmay_swap-to-may_unmap.patch mm-introduce-for_each_populated_zone-macro.patch mm-introduce-for_each_populated_zone-macro-cleanup.patch alpha-fix-macros.patch do_pipe-drop-its-last-user-in-arch-alpha.patch do_pipe-drop-its-last-user-in-arch-alpha-checkpatch-fixes.patch maintainers-add-the-missing-linux-alpha-port-mailling-list.patch pm-wait-for-console-in-resume.patch pm-fix-suspend_console-resume_console-to-use-only-one-semaphore.patch fix-pm_notifiers-during-user-mode-hibernation.patch loop-add-ioctl-to-resize-a-loop-device.patch loop-add-ioctl-to-resize-a-loop-device-security-check-for-loop_set_capacity.patch loop-add-ioctl-to-resize-a-loop-device-loop_set_capacity-sector_t-may-be-narrow-for-bit-shfit.patch lib-rbtreec-optimize-rb_erase.patch filesystem-freeze-allow-sysrq-emergency-thaw-to-thaw-frozen-filesystems.patch remove-unused-include-asm-generic-dma-mappingh.patch auxdisplay-remove-parport-dependency.patch latencytop-incorporate-review-feedback-from-andrew-morton.patch getrusage-fill-ru_maxrss-value.patch revert-protect-f_flags-against-races-and-eliminate-fasync-bkl-usage.patch fasync-rename-struct-file-f_ep_lock.patch fasync-use-f_lock-to-protect-f_flags.patch fasync-move-bit-handling-to-f_op-fasync.patch fasync-rationalize-return-values.patch softirq-introduce-statistics-for-softirq.patch proc-export-statistics-for-softirq-to-proc.patch proc-export-statistics-for-softirq-to-proc-fix.patch proc-update-document-for-proc-softirqs-and-proc-stat.patch checkpatch-make-in_atomic-ok-in-the-core.patch checkpatch-do-not-warn-about-p0-patches-when-checking-files.patch checkpatch-correctly-handle-type-spacing-in-the-face-of-modifiers.patch checkpatch-pointer-type-star-may-have-modifiers-following.patch checkpatch-a-modifier-is-not-an-identifier-at-the-end-of-a-type.patch checkpatch-extend-attribute-testing-to-all-modifiers.patch checkpatch-add-__ref-as-a-sparse-modifier.patch checkpatch-version-028.patch epoll-fix-own-poll.patch epoll-fix-epolls-own-poll-update.patch epoll-remove-debugging-code.patch eventfd-improve-support-for-semaphore-like-behavior.patch epoll-keyed-wakeups-v2-add-__wake_up_locked_key-and-__wake_up_sync_key.patch epoll-keyed-wakeups-v2-introduce-new-_poll-wakeup-macros.patch epoll-keyed-wakeups-v3-introduce-new-_poll-wakeup-macros.patch epoll-keyed-wakeups-v2-make-sockets-use-keyed-wakeups.patch epoll-keyed-wakeups-v2-teach-epoll-about-hints-coming-with-the-wakeup-key.patch epoll-keyed-wakeups-v2-teach-epoll-about-hints-coming-with-the-wakeup-key-update.patch epoll-keyed-wakeups-v2-teach-epoll-about-hints-coming-with-the-wakeup-key-checkpatch-fixes.patch epoll-keyed-wakeups-v2-make-eventfd-use-keyed-wakeups.patch epoll-keyed-wakeups-v2-make-tty-use-keyed-wakeups.patch hp-accelerometer-add-freefall-detection.patch pci-use-pci_ioremap_bar-in-drivers-serial.patch dmi-let-dmi_walk-users-pass-private-data.patch spi_mpc83xx-fix-sparse-warnings.patch spi_mpc83xx-rework-chip-selects-handling.patch spi_mpc83xx-add-of-platform-driver-bindings.patch powerpc-add-mmc-spi-slot-bindings.patch powerpc-83xx-add-mmc-spi-support-via-the-device-tree-for-mpc8323e-rdb.patch powerpc-fsl_soc-isolate-legacy-fsl_spi-support-to-mpc832x_rdb-boards.patch blackfin-spi-driver-ensure-cache-coherency-before-doing-dma.patch blackfin-spi-driver-fix-erroneous-spi-clock-divisor-calculation.patch blackfin-spi-driver-remove-useless-asm-cplbinith.patch blackfin-spi-driver-use-len_in_bytes-when-we-care-about-the-number-of-bytes-transferred.patch blackfin-spi-driver-pass-dma-overflow-error-to-the-higher-level.patch blackfin-spi-driver-unify-duplicated-code-in-dma-read-write-paths.patch blackfin-spi-driver-drop-bogus-cast-and-touchup-dma-label.patch blackfin-spi-driver-add-a-few-more-dma-debug-messages.patch blackfin-spi-driver-do-not-check-for-spi-errors-if-dma-itself-did-not-flag-any.patch blackfin-spi-driver-use-the-properl-bit_ctl_xxx-defines.patch blackfin-spi-driver-spi-slave-select-code-cleanup.patch blackfin-spi-driver-get-dma-working-for-spi-flashes.patch blackfin-spi-driver-add-timeout-while-waiting-for-spif-in-dma-irq-handler.patch blackfin-spi-driver-tweak-magic-spi-dma-sequence-to-get-it-working-on-bf54x.patch blackfin-spi-driver-fix-bug-spi-controller-driver-does-not-assert-deassert-cs-correctly.patch blackfin-spi-driver-fix-bug-correct-usage-of-struct-spi_transfercs_change.patch blackfin-spi-driver-use-bfin_spi_-prefix-on-all-functions.patch blackfin-spi-driver-fix-null-pointer-crash.patch blackfin-spi-driver-add-gpio-controlled-spi-slave-select-support.patch blackfin-spi-driver-make-mmc_spi-driver-work-on-blackfin.patch spi-limit-reaches-1-tested-0.patch spi-pxa2xx_spi-introduces-chipselect-gpio-to-simplify-the-common-cases.patch kprobes-cleanup-aggr_kprobe-related-code.patch kprobes-move-export_symbol_gpl-just-after-function-definitions.patch kprobes-cleanup-comment-style-in-kprobesh.patch kprobes-rename-kprobe_enabled-to-kprobes_all_disarmed.patch kprobes-support-per-kprobe-disabling.patch kprobes-support-kretprobe-and-jprobe-per-probe-disabling.patch rtc-convert-wm8350-use-new-alarm-and-update-operations.patch rtc-convert-leap_year-into-an-inline.patch rtc-add-platform-driver-for-efi.patch rtc-add-platform-driver-for-efi-fix.patch rtc-parisc-add-a-missing-include-for-linux-rtch.patch rtc-parisc-remove-redundant-locking.patch rtc-parisc-remove-struct-parisc_rtc.patch rtc-parisc-use-rtc_valid_tm-in-parisc_get_time.patch rtc-parisc-use-platform_driver_probe.patch rtc-parisc-declare-rtc_parisc_dev-as-static.patch rtc-parisc-remove-unnecessary-ret-variable.patch rtc-parisc-remove-a-couple-unnecessary-variables.patch rtc-parisc-rename-p-pointer-to-rtc.patch rtc-ds1307-true-smbus-compatibility.patch rtc-add-epson-rx8025-support-to-ds1307-rtc-driver.patch rtc-wm8350-retries-will-reach-1.patch gpiolib-allow-gpios-to-be-named.patch gpio-gpio_requestfree-now-required-feature-removal.patch drivers-video-uvesafbc-dont-use-gfp_any.patch atyfb-fix-header-file-trailing-whitespace.patch cirrusfb-convert-printks-to-dev_foo.patch cirrusfb-convert-printks-to-dev_foo-fix.patch cirrusfb-convert-printks-to-dev_foo-fix-fix2.patch cirrusfb-fix-laguna-chipset-memory-detection-and-clock-setting.patch cirrusfb-add-laguna-additional-overflow-register.patch fbmem-fix-fb_info-lock-and-mm-mmap_sem-circular-locking-dependency.patch fbdev-uninline-lock_fb_info.patch drivers-video-sgivwfbc-fix-memory-leaks-in-removal-path.patch tdfxfb-fix-memory-leaks-in-removal-path.patch tridentfb-fix-memory-leaks-in-removal-path.patch vfb-fix-memory-leaks-in-removal-path.patch skeletonfb-check-fb_alloc_cmap-return-value-and-handle-failure-properly.patch sm501fb-check-fb_alloc_cmap-return-value-and-handle-failure-properly.patch sstfb-check-fb_alloc_cmap-return-value-and-handle-failure-properly.patch stifb-check-fb_alloc_cmap-return-value-and-handle-failure-properly.patch valkyriefb-check-fb_alloc_cmap-return-value-and-handle-failure-properly.patch sunxvr500-fix-cmap-memory-leaks.patch tgafb-fix-cmap-memory-leak.patch 68328fb-fix-cmap-memory-leaks.patch amba-clcd-fix-cmap-memory-leaks.patch amifb-check-fb_alloc_cmap-return-value-and-handle-failure-properly.patch fbdev-newport-newport_wait-return-0-on-timeout.patch fbdev-update-s1d13xxxfb-to-differ-between-revisions-and-production-ids.patch fbdev-update-s1d13xxxfb-to-differ-between-revisions-and-production-ids-checkpatch-fixes.patch fbdev-update-s1d13xxxfb-to-differ-between-revisions-and-production-ids-simplification.patch intelfb-support-i854.patch pnpbios-fix-warning-if-no-hotplug.patch pnpbios-propagate-kthread_run-error.patch ext2-fix-support-for-empty-directory-blocks-in-64k-blocksize-filesystems.patch ext3-remove-the-bkl-in-ext3-ioctlc.patch jbd-fix-oops-in-jbd_journal_init_inode-on-corrupted-fs.patch ext3-fix-support-for-empty-directory-blocks-in-64k-blocksize-filesystems.patch hfsplus-identify-journal-info-block-in-volume-header.patch hfsplus-fix-journal-detection.patch ufs-sector_t-cannot-be-negative.patch ufs-validate-maximum-fast-symlink-size-from-superblock.patch ufs-dont-truncate-longer-ufs2-fast-symlinks.patch ufs-ensure-fast-symlinks-are-nul-terminated.patch ufs-copy-symlink-data-into-the-correct-union-member.patch documentation-ignore-byproducts-from-latex.patch cgroups-fix-cgrouph-comments.patch relax-ns_can_attach-checks-to-allow-attaching-to-grandchild-cgroups.patch cgroup-css-id-support.patch cgroup-fix-frequent-ebusy-at-rmdir.patch memcg-use-css-id.patch memcg-hierarchical-stat.patch memcg-fix-shrinking-memory-to-return-ebusy-by-fixing-retry-algorithm.patch memcg-fix-oom-killer-under-memcg.patch memcg-fix-oom-killer-under-memcg-fix2.patch memcg-fix-oom-killer-under-memcg-fix.patch memcg-show-memcg-information-during-oom.patch memcg-show-memcg-information-during-oom-fix2.patch memcg-show-memcg-information-during-oom-fix.patch memcg-show-memcg-information-during-oom-fix-fix.patch memcg-show-memcg-information-during-oom-fix-fix-checkpatch-fixes.patch memcg-remove-mem_cgroup_calc_mapped_ratio-take2.patch memcg-remove-mem_cgroup_reclaim_imbalance-remnants.patch cpuset-fix-possible-races-in-cpu-memory-hotplug.patch ptrace-kill-__ptrace_detach-fix-exit_state-check.patch ptrace-simplify-ptrace_exit-ignoring_children-path.patch ptrace-simplify-ptrace_exit-ignoring_children-pathpatch-fix.patch ptrace-reintroduce-__ptrace_detach-as-a-callee-of-ptrace_exit.patch ptrace-reintroduce-__ptrace_detach-as-a-callee-of-ptrace_exit-fix.patch ptrace-fix-possible-zombie-leak-on-ptrace_detach.patch reparent_thread-dont-call-kill_orphaned_pgrp-if-task_detached.patch reparent_thread-fix-the-is-it-traced-check.patch reparent_thread-fix-a-zombie-leak-if-sbin-init-ignores-sigchld.patch forget_original_parent-cleanup-ptrace-pathes.patch workqueue-avoid-recursion-in-run_workqueue.patch kthreads-move-sched-realeted-initialization-from-kthreadd-context.patch kthreads-simplify-the-startup-synchronization.patch kthreads-rework-kthread_stop.patch kthreads-simplify-migration_thread-exit-path.patch cpu-hotplug-remove-unused-cpuhotplug_mutex_lock.patch make-shm_get_stat-more-robust.patch bin_elf_fdpic-check-the-return-value-of-clear_user.patch struct-linux_binprm-drop-unused-fields.patch pids-document-task_pgrp-task_session-is-not-safe-without-tasklist-rcu.patch pids-document-task_pgrp-task_session-is-not-safe-without-tasklist-rcu-fix.patch pids-improve-get_task_pid-to-fix-the-unsafe-sys_wait4-task_pgrp.patch pids-refactor-vnr-nr_ns-helpers-to-make-them-safe.patch pids-kill-now-unused-signal_struct-__pgrp-__session-and-friends.patch nbd-add-locking-to-nbd_ioctl.patch nbd-add-locking-to-nbd_ioctl-checkpatch-fixes.patch nbd-add-locking-to-nbd_ioctl-fix.patch nbd-trivial-cleanups.patch futex-comment-requeue-key-reference-semantics.patch relay-reset-consumed.patch trace-code-and-documentation.patch trace-code-and-documentation-merging-documentation-tracetxt-with-documentation-filesystems-relaytxt.patch trace-sample.patch edac-add-more-verbose-debug-info.patch edac-remove-edacs-experimental-status.patch edac-new-ppc4xx-driver-module.patch edac-new-ppc4xx-driver-module-update.patch edac-new-ppc4xx-driver-module-update-checkpatch-fixes.patch edac-new-ppc4xx-driver-module-update-checkpatch-fixes-checkpatch-fixes.patch kexec-add-dmesg-log-symbols-to-proc-vmcoreinfo-lists.patch kexec-add-dmesg-log-symbols-to-proc-vmcoreinfo-lists-fix.patch kexec-add-dmesg-log-symbols-to-proc-vmcoreinfo-lists-fix-fix.patch kexec-add-dmesg-log-symbols-to-proc-vmcoreinfo-lists-fix-fix-fix.patch kexec-add-dmesg-log-symbols-to-proc-vmcoreinfo-lists-fix-fix-fix-fix.patch kexec-add-dmesg-log-symbols-to-proc-vmcoreinfo-lists-fix-fix-fix-checkpatch-fixes-cleanup.patch sgi-gru-exclude-uv-definitions-on-32-bit-x86.patch sgi-gru-add-definitions-of-x86_64-gru-mmrs.patch sgi-gru-add-definitions-of-ia64-gru-mmrs.patch sgi-gru-add-macros-for-using-the-uv-hub-to-send-interrupts.patch sgi-gru-misc-gru-cleanup.patch sgi-gru-improvements-to-gru-debug-messages-statistics.patch sgi-gru-change-gru-cch-commands-from-inline-functions-to-outofline-functions.patch sgi-gru-add-statistics-to-the-gru-context-management-functions.patch sgi-gru-add-support-for-a-user-to-explicitly-unload-a-gru-context.patch sgi-gru-asid-context-management-bug-fixes.patch sgi-gru-restructure-the-gru-vtop-functions.patch sgi-gru-add-support-to-the-gru-driver-for-message-queue-interrupts.patch sgi-gru-macro-for-scanning-all-gru-chiplets.patch sgi-gru-fix-bugs-related-to-module-unload-of-the-gru-driver.patch sgi-gru-support-multiple-pagesizes-in-gru.patch cramfs-propagate-uncompression-errors.patch synchronize-device-shutdown.patch serios-async-shutdown.patch sd-async-shutdown.patch factor-out-ifdefs-from-kernel-spinlockc-to-lock_contended_flags.patch allow-rwlocks-to-re-enable-interrupts.patch ia64-implement-interrupt-enabling-rwlocks.patch preadv-pwritev-create-compat_readv.patch preadv-pwritev-create-compat_writev.patch preadv-pwritev-add-preadv-and-pwritev-system-calls.patch preadv-pwritev-mips-add-preadv2-and-pwritev2-syscalls.patch preadv-pwritev-switch-compat-readv-preadv-writev-pwritev-from-fget-to-fget_light.patch linuxpps-core-support.patch linuxpps-core-support-v2.patch fs-adfs-return-f_fsid-for-statfs2.patch fs-affs-return-f_fsid-for-statfs2.patch fs-befs-return-f_fsid-for-statfs2.patch fs-cramfs-return-f_fsid-for-statfs2.patch fs-efs-return-f_fsid-for-statfs2.patch fs-fat-return-f_fsid-for-statfs2.patch fs-hfs-return-f_fsid-for-statfs2.patch fs-hfsplus-return-f_fsid-for-statfs2.patch fs-hpfs-return-f_fsid-for-statfs2.patch fs-isofs-return-f_fsid-for-statfs2.patch fs-minix-return-f_fsid-for-statfs2.patch fs-omfs-return-f_fsid-for-statfs2.patch fs-qnx4-return-f_fsid-for-statfs2.patch fs-reiserfs-return-f_fsid-for-statfs2.patch fs-reiserfs-return-f_fsid-for-statfs2-v2.patch fs-romfs-return-f_fsid-for-statfs2.patch fs-squashfs-return-f_fsid-for-statfs2.patch fs-sysv-return-f_fsid-for-statfs2.patch fs-ufs-return-f_fsid-for-statfs2.patch arch-x86-kernel-acpi-cstatec-avoid-using-work_on_cpu.patch arch-x86-kernel-cpu-cpufreq-acpi-cpufreqc-avoid-using-work_on_cpu.patch arch-x86-kernel-cpu-mcheck-mce_amd_64c-avoid-using-work_on_cpu.patch work_on_cpu-rewrite-it-to-create-a-kernel-thread-on-demand.patch nilfs2-add-document.patch nilfs2-disk-format-and-userland-interface.patch nilfs2-add-inode-and-other-major-structures.patch nilfs2-integrated-block-mapping.patch nilfs2-integrated-block-mapping-remove-nilfs-bmap-wrapper-macros.patch nilfs2-integrated-block-mapping-remove-nilfs-bmap-wrapper-macros-checkpatch-fixes.patch nilfs2-b-tree-based-block-mapping.patch nilfs2-direct-block-mapping.patch nilfs2-b-tree-node-cache.patch nilfs2-buffer-and-page-operations.patch nilfs2-meta-data-file.patch nilfs2-persistent-object-allocator.patch nilfs2-disk-address-translator.patch nilfs2-inode-map-file.patch nilfs2-checkpoint-file.patch nilfs2-segment-usage-file.patch nilfs2-segment-usage-file-fix-wrong-counting-of-checkpoints-and-dirty-segments.patch nilfs2-inode-operations.patch nilfs2-inode-operations-fix.patch nilfs2-file-operations.patch nilfs2-directory-entry-operations.patch nilfs2-pathname-operations.patch nilfs2-pathname-operations-fix.patch nilfs2-operations-for-the_nilfs-core-object.patch nilfs2-super-block-operations.patch nilfs2-super-block-operations-fix.patch vfs-simple_set_mnt-should-return-void-fix-nilfs.patch nilfs2-segment-buffer.patch nilfs2-segment-constructor.patch nilfs2-segment-constructor-insert-checks-and-hole-block-allocation-in-page_mkwrite.patch nilfs2-fix-miss-sync-issue-for-do_sync_mapping_range.patch nilfs2-fix-miss-sync-issue-for-do_sync_mapping_range-fix.patch nilfs2-recovery-functions.patch nilfs2-another-dat-for-garbage-collection.patch nilfs2-block-cache-for-garbage-collection.patch nilfs2-ioctl-operations.patch nilfs2-update-makefile-and-kconfig.patch nilfs2-fix-problems-of-memory-allocation-in-ioctl.patch nilfs2-cleanup-nilfs_clear_inode.patch nilfs2-avoid-double-error-caused-by-nilfs_transaction_end.patch nilfs2-insert-explanations-in-gcinode-file.patch nilfs2-add-maintainer.patch nilfs2-fix-gc-failure-on-volumes-keeping-numerous-snapshots.patch nilfs2-clean-up-indirect-function-calling-conventions.patch nilfs2-fix-buggy-behavior-seen-in-enumerating-checkpoints.patch reiser4-vfs-add-super_operationssync_inodes-2.patch reiser4-export-remove_from_page_cache.patch reiser4-export-find_get_pages.patch reiser4.patch reiser4-adjust-to-the-new-aops.patch reiser4-adjust-to-the-new-aops-fixup.patch reiser4-remove-simple_prepare_write-usage.patch reiser4-remove-simple_prepare_write-usage-checkpatch-fixes.patch fs-symlink-write_begin-allocation-context-fix-reiser4-fix.patch reiser4-handling-error-returned-by-d_obtain_alias-fixup.patch make-sure-nobodys-leaking-resources.patch journal_add_journal_head-debug.patch releasing-resources-with-children.patch make-frame_pointer-default=y.patch mutex-subsystem-synchro-test-module.patch slab-leaks3-default-y.patch put_bh-debug.patch add-debugging-aid-for-memory-initialisation-problems.patch shrink_slab-handle-bad-shrinkers.patch keep-track-of-network-interface-renaming.patch workaround-for-a-pci-restoring-bug.patch prio_tree-debugging-patch.patch single_open-seq_release-leak-diagnostics.patch add-a-refcount-check-in-dput.patch getblk-handle-2tb-devices.patch getblk-handle-2tb-devices-fix.patch undeprecate-pci_find_device.patch notify_change-callers-must-hold-i_mutex.patch drivers-net-bonding-bond_sysfsc-suppress-uninitialized-var-warning.patch ^ permalink raw reply [flat|nested] 44+ messages in thread
* dead USB devices after resume [mmotm 2009-02-10-16-35] 2009-02-11 0:36 mmotm 2009-02-10-16-35 uploaded akpm @ 2009-02-11 8:44 ` Jiri Slaby 2009-02-11 8:51 ` ACPI: S4 disappeared " Jiri Slaby ` (4 subsequent siblings) 5 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 8:44 UTC (permalink / raw) To: linux-kernel; +Cc: mm-commits, Greg KH, USB list, Alan Stern, linux-input On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded Hi, when I resume from suspend, USB mouse and kbd are not responding anymore, no LEDs, nothing. I need to unplug and replug to get it working. This is a regression since mmotm based on 2.6.29-rc2 which is fine. Any ideas before I start bisection? Dmesgs diff follows. There is nothing unusual, I think. The very last lines correspond to unplug/replug... --- good 2009-02-11 09:19:39.000000000 +0100 +++ wrong 2009-02-11 09:17:49.000000000 +0100 @@ -1,5 +1,5 @@ Initializing cgroup subsys cpuset -Linux version 2.6.29-rc2-mm1_64 (ku@bellona) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #534 SMP Mon Jan 19 10:44:28 CET 2009 +Linux version 2.6.29-rc4-mm1_64 (ku@bellona) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #569 SMP Wed Feb 11 09:11:57 CET 2009 Command line: root=/dev/md1 vga=1 ro reboot=a,w slub_debug debug resume=/dev/sdb6 2 KERNEL supported cpus: Intel GenuineIntel @@ -27,7 +27,7 @@ ACPI: RSDP 000F9990, 0024 (r2 ACPIAM) ACPI: XSDT 7D5B0100, 0064 (r1 A M I OEMXSDT 5000708 MSFT 97) ACPI: FACP 7D5B0290, 00F4 (r3 A M I OEMFACP 5000708 MSFT 97) -ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 128/64 [20081204] +ACPI Warning (tbfadt-0567): 32/64X length mismatch in Gpe0Block: 128/64 [20090123] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7D5B0490, 6643 (r1 SDBLI9 SDBLI944 44 INTL 20051117) ACPI: FACS 7D5BE000, 0040 @@ -42,7 +42,7 @@ (5 early reservations) ==> bootmem [0000000000 - 007d5b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] - #2 [0000200000 - 00008a79e4] TEXT DATA BSS ==> [0000200000 - 00008a79e4] + #2 [0000200000 - 000089769c] TEXT DATA BSS ==> [0000200000 - 000089769c] #3 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 @@ -57,8 +57,8 @@ 0: 0x00000100 -> 0x0007d5b0 On node 0 totalpages: 513355 DMA zone: 56 pages used for memmap - DMA zone: 1807 pages reserved - DMA zone: 2132 pages, LIFO batch:0 + DMA zone: 1791 pages reserved + DMA zone: 2148 pages, LIFO batch:0 DMA32 zone: 6964 pages used for memmap DMA32 zone: 502396 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 @@ -77,21 +77,17 @@ ACPI: HPET id: 0x8086a301 base: 0xfed00000 4 Processors exceeds NR_CPUS limit of 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs -PM: Registered nosave memory: 000000000009c000 - 000000000009d000 -PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 -PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 -PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7d600000:81790000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 -PERCPU: Allocating 49152 bytes of per cpu data -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504528 +PERCPU: Allocating 77824 bytes of per cpu data +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504544 Kernel command line: root=/dev/md1 vga=1 ro reboot=a,w slub_debug debug resume=/dev/sdb6 2 Initializing CPU#0 NR_IRQS:4352 nr_irqs:288 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT -Detected 2992.548 MHz processor. +Detected 2992.452 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) @@ -100,11 +96,10 @@ please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found -Memory: 1993388k/2053824k available (3914k kernel code, 404k absent, 59348k reserved, 1810k data, 336k init) -SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 +Memory: 1993452k/2053824k available (3910k kernel code, 404k absent, 59340k reserved, 1806k data, 360k init) hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer -Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.09 BogoMIPS (lpj=11970192) +Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.90 BogoMIPS (lpj=11969808) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns @@ -114,11 +109,11 @@ Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal LVT vector (0xfa) already installed -using mwait in idle threads. -ACPI: Core revision 20081204 +ACPI: Core revision 20090123 Setting APIC routing to flat alloc irq_desc for 20 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 @@ -126,9 +121,10 @@ CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 5984.98 BogoMIPS (lpj=11969960) +Calibrating delay using timer specific routine.. 5984.90 BogoMIPS (lpj=11969813) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) @@ -136,7 +132,7 @@ CPU1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs -Total of 2 processors activated (11970.07 BogoMIPS). +Total of 2 processors activated (11969.81 BogoMIPS). net_namespace: 968 bytes NET: Registered protocol family 16 ACPI: bus type pci registered @@ -147,7 +143,7 @@ ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled -ACPI: (supports S0 S1 S3 S4 S5) +ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources @@ -231,7 +227,7 @@ ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *12 14 15) -ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C7, should be BA [20081204] +ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C7, should be BA [20090123] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs @@ -349,18 +345,18 @@ 0000:00:03.3: ttyS1 at I/O 0xe000 (irq = 17) is a 16550A parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] -Switched to high resolution mode on CPU 1 -Switched to high resolution mode on CPU 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: module loaded -e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 +e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 26 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 e1000e 0000:00:19.0: irq 26 for MSI/MSI-X +Switched to high resolution mode on CPU 1 +Switched to high resolution mode on CPU 0 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:20:f5:f2:1d 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff @@ -527,28 +523,27 @@ device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu -Advanced Linux Sound Architecture Driver Version 1.0.18a. +Advanced Linux Sound Architecture Driver Version 1.0.19. alloc irq_desc for 22 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel at 0xffa74000 irq 22 Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input2 input: HDA Intel at 0xffa74000 irq 22 Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input3 -firewire_core: created device fw0: GUID 0000000000000000, S400 input: HDA Intel at 0xffa74000 irq 22 Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input4 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input5 +firewire_core: created device fw0: GUID 0000000000000000, S400 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input6 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input8 input: HDA Intel at 0xffa74000 irq 22 HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input9 -usb 6-1: new full speed USB device using uhci_hcd and address 2 ALSA device list: #0: HDA Intel at 0xffa74000 irq 22 TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 registered taskstats version 1 -rtc_cmos 00:03: setting system clock to 2009-02-11 08:18:36 UTC (1234340316) +rtc_cmos 00:03: setting system clock to 2009-02-11 08:14:37 UTC (1234340077) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. @@ -627,8 +622,9 @@ kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 9:1. -Freeing unused kernel memory: 336k freed -Write protecting the kernel read-only data: 5352k +Freeing unused kernel memory: 360k freed +Write protecting the kernel read-only data: 5344k +usb 6-1: new full speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected @@ -642,9 +638,7 @@ ath5k 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ath5k 0000:04:00.0: registered as 'phy0' input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input10 -wmaster0 (ath5k): not using net_device_ops yet phy0: Selected rate control algorithm 'minstrel' -wlan0 (ath5k): not using net_device_ops yet ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) wlan0 renamed to wlan1 udev: renamed network interface wlan0 to wlan1 @@ -702,24 +696,16 @@ serial 00:06: disabled ath5k 0000:04:00.0: PCI INT A disabled ACPI handle has no context! -ehci_hcd 0000:00:1d.7: PME# enabled -ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI ehci_hcd 0000:00:1d.7: PCI INT A disabled -uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI +ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT D disabled -uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI uhci_hcd 0000:00:1d.1: PCI INT B disabled -uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A disabled -ehci_hcd 0000:00:1a.7: PME# enabled -ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI ehci_hcd 0000:00:1a.7: PCI INT D disabled -uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI +ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled -uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI uhci_hcd 0000:00:1a.1: PCI INT B disabled -uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI @@ -748,6 +734,13 @@ pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0xe401) pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0xe481) pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0xe801) +serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a) +serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xffa7a000) +e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10e) +e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xdc01) +e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xffa79000) +e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xffa40000) +e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) @@ -756,27 +749,36 @@ HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) -pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100500) +pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504) pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x20300, writing 0x2030c) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) -pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100106, writing 0x100502) +pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) -pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) +ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) pci 0000:00:1f.6: restoring config space at offset 0xb (was 0x0, writing 0x29328086) pci 0000:02:00.0: restoring config space at offset 0x7 (was 0x2a001f1, writing 0x22a001f1) -pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100116, writing 0x100112) +firewire_ohci 0000:03:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010c) +firewire_ohci 0000:03:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xff5f8000) +firewire_ohci 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff5ff800) +firewire_ohci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) +firewire_ohci 0000:03:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300016) +ath5k 0000:04:00.0: restoring config space at offset 0xf (was 0x1c0a0100, writing 0x1c0a0103) +ath5k 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff6f0000) +ath5k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0xa808) +ath5k 0000:04:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900016) Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 5985.15 BogoMIPS (lpj=11970311) +Calibrating delay using timer specific routine.. 5984.91 BogoMIPS (lpj=11969836) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) @@ -790,13 +792,6 @@ pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: PME# disabled pci 0000:00:03.2: PME# disabled -serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a) -serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xffa7a000) -e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10e) -e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xdc01) -e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xffa79000) -e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xffa40000) -e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI @@ -806,61 +801,45 @@ e1000e 0000:00:19.0: irq 26 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 -uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 -uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 -uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI usb usb5: root hub lost power or was reset +ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 -ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 -pcieport-driver 0000:00:1c.0: setting latency timer to 64 -pcieport-driver 0000:00:1c.2: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 -uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 -uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI usb usb7: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.2: setting latency timer to 64 -uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI usb usb8: root hub lost power or was reset +ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 -ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 -ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) ahci 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.6: PME# disabled pci 0000:02:00.0: setting latency timer to 64 -firewire_ohci 0000:03:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010c) -firewire_ohci 0000:03:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xff5f8000) -firewire_ohci 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff5ff800) -firewire_ohci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) -firewire_ohci 0000:03:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300016) -ath5k 0000:04:00.0: restoring config space at offset 0xf (was 0x1c0a0100, writing 0x1c0a0103) -ath5k 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff6f0000) -ath5k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0xa808) -ath5k 0000:04:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900016) +firewire_core: skipped bus generations, destroying all nodes ath5k 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 serial 00:06: activated parport_pc 00:08: activated sd 0:0:0:0: [sda] Starting disk +ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) -ata5: SATA link down (SStatus 0 SControl 300) +firewire_core: rediscovered device fw0 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) @@ -894,3 +873,20 @@ usb 6-1.1: reset full speed USB device using uhci_hcd and address 3 usb 6-1.2: reset low speed USB device using uhci_hcd and address 4 Restarting tasks ... done. +usb 6-1: USB disconnect, address 2 +usb 6-1.1: USB disconnect, address 3 +usb 6-1.2: USB disconnect, address 4 +usb 6-1: new full speed USB device using uhci_hcd and address 5 +usb 6-1: configuration #1 chosen from 1 choice +hub 6-1:1.0: USB hub found +hub 6-1:1.0: 3 ports detected +usb 6-1.1: new full speed USB device using uhci_hcd and address 6 +usb 6-1.1: configuration #1 chosen from 1 choice +input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input13 +generic-usb 0003:0458:004C.0004: input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input0 +input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input14 +generic-usb 0003:0458:004C.0005: input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input1 +usb 6-1.2: new low speed USB device using uhci_hcd and address 7 +usb 6-1.2: configuration #1 chosen from 1 choice +input: Microsoft Corporation Microsoft � Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input15 +generic-usb 0003:045E:00F0.0006: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft � Laser Mouse 6000] on usb-0000:00:1d.0-1.2/input0 ^ permalink raw reply [flat|nested] 44+ messages in thread
* dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 8:44 ` Jiri Slaby 0 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 8:44 UTC (permalink / raw) To: linux-kernel; +Cc: mm-commits, Greg KH, USB list, Alan Stern, linux-input On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded Hi, when I resume from suspend, USB mouse and kbd are not responding anymore, no LEDs, nothing. I need to unplug and replug to get it working. This is a regression since mmotm based on 2.6.29-rc2 which is fine. Any ideas before I start bisection? Dmesgs diff follows. There is nothing unusual, I think. The very last lines correspond to unplug/replug... --- good 2009-02-11 09:19:39.000000000 +0100 +++ wrong 2009-02-11 09:17:49.000000000 +0100 @@ -1,5 +1,5 @@ Initializing cgroup subsys cpuset -Linux version 2.6.29-rc2-mm1_64 (ku@bellona) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #534 SMP Mon Jan 19 10:44:28 CET 2009 +Linux version 2.6.29-rc4-mm1_64 (ku@bellona) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #569 SMP Wed Feb 11 09:11:57 CET 2009 Command line: root=/dev/md1 vga=1 ro reboot=a,w slub_debug debug resume=/dev/sdb6 2 KERNEL supported cpus: Intel GenuineIntel @@ -27,7 +27,7 @@ ACPI: RSDP 000F9990, 0024 (r2 ACPIAM) ACPI: XSDT 7D5B0100, 0064 (r1 A M I OEMXSDT 5000708 MSFT 97) ACPI: FACP 7D5B0290, 00F4 (r3 A M I OEMFACP 5000708 MSFT 97) -ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 128/64 [20081204] +ACPI Warning (tbfadt-0567): 32/64X length mismatch in Gpe0Block: 128/64 [20090123] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7D5B0490, 6643 (r1 SDBLI9 SDBLI944 44 INTL 20051117) ACPI: FACS 7D5BE000, 0040 @@ -42,7 +42,7 @@ (5 early reservations) ==> bootmem [0000000000 - 007d5b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] - #2 [0000200000 - 00008a79e4] TEXT DATA BSS ==> [0000200000 - 00008a79e4] + #2 [0000200000 - 000089769c] TEXT DATA BSS ==> [0000200000 - 000089769c] #3 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 @@ -57,8 +57,8 @@ 0: 0x00000100 -> 0x0007d5b0 On node 0 totalpages: 513355 DMA zone: 56 pages used for memmap - DMA zone: 1807 pages reserved - DMA zone: 2132 pages, LIFO batch:0 + DMA zone: 1791 pages reserved + DMA zone: 2148 pages, LIFO batch:0 DMA32 zone: 6964 pages used for memmap DMA32 zone: 502396 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 @@ -77,21 +77,17 @@ ACPI: HPET id: 0x8086a301 base: 0xfed00000 4 Processors exceeds NR_CPUS limit of 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs -PM: Registered nosave memory: 000000000009c000 - 000000000009d000 -PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 -PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 -PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7d600000:81790000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 -PERCPU: Allocating 49152 bytes of per cpu data -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504528 +PERCPU: Allocating 77824 bytes of per cpu data +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504544 Kernel command line: root=/dev/md1 vga=1 ro reboot=a,w slub_debug debug resume=/dev/sdb6 2 Initializing CPU#0 NR_IRQS:4352 nr_irqs:288 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT -Detected 2992.548 MHz processor. +Detected 2992.452 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) @@ -100,11 +96,10 @@ please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found -Memory: 1993388k/2053824k available (3914k kernel code, 404k absent, 59348k reserved, 1810k data, 336k init) -SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 +Memory: 1993452k/2053824k available (3910k kernel code, 404k absent, 59340k reserved, 1806k data, 360k init) hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer -Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.09 BogoMIPS (lpj=11970192) +Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.90 BogoMIPS (lpj=11969808) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns @@ -114,11 +109,11 @@ Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal LVT vector (0xfa) already installed -using mwait in idle threads. -ACPI: Core revision 20081204 +ACPI: Core revision 20090123 Setting APIC routing to flat alloc irq_desc for 20 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 @@ -126,9 +121,10 @@ CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 5984.98 BogoMIPS (lpj=11969960) +Calibrating delay using timer specific routine.. 5984.90 BogoMIPS (lpj=11969813) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) @@ -136,7 +132,7 @@ CPU1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs -Total of 2 processors activated (11970.07 BogoMIPS). +Total of 2 processors activated (11969.81 BogoMIPS). net_namespace: 968 bytes NET: Registered protocol family 16 ACPI: bus type pci registered @@ -147,7 +143,7 @@ ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled -ACPI: (supports S0 S1 S3 S4 S5) +ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources @@ -231,7 +227,7 @@ ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *12 14 15) -ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C7, should be BA [20081204] +ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C7, should be BA [20090123] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs @@ -349,18 +345,18 @@ 0000:00:03.3: ttyS1 at I/O 0xe000 (irq = 17) is a 16550A parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] -Switched to high resolution mode on CPU 1 -Switched to high resolution mode on CPU 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: module loaded -e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 +e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 26 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 e1000e 0000:00:19.0: irq 26 for MSI/MSI-X +Switched to high resolution mode on CPU 1 +Switched to high resolution mode on CPU 0 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:20:f5:f2:1d 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff @@ -527,28 +523,27 @@ device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu -Advanced Linux Sound Architecture Driver Version 1.0.18a. +Advanced Linux Sound Architecture Driver Version 1.0.19. alloc irq_desc for 22 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel at 0xffa74000 irq 22 Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input2 input: HDA Intel at 0xffa74000 irq 22 Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input3 -firewire_core: created device fw0: GUID 0000000000000000, S400 input: HDA Intel at 0xffa74000 irq 22 Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input4 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input5 +firewire_core: created device fw0: GUID 0000000000000000, S400 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input6 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input8 input: HDA Intel at 0xffa74000 irq 22 HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input9 -usb 6-1: new full speed USB device using uhci_hcd and address 2 ALSA device list: #0: HDA Intel at 0xffa74000 irq 22 TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 registered taskstats version 1 -rtc_cmos 00:03: setting system clock to 2009-02-11 08:18:36 UTC (1234340316) +rtc_cmos 00:03: setting system clock to 2009-02-11 08:14:37 UTC (1234340077) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. @@ -627,8 +622,9 @@ kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 9:1. -Freeing unused kernel memory: 336k freed -Write protecting the kernel read-only data: 5352k +Freeing unused kernel memory: 360k freed +Write protecting the kernel read-only data: 5344k +usb 6-1: new full speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected @@ -642,9 +638,7 @@ ath5k 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ath5k 0000:04:00.0: registered as 'phy0' input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input10 -wmaster0 (ath5k): not using net_device_ops yet phy0: Selected rate control algorithm 'minstrel' -wlan0 (ath5k): not using net_device_ops yet ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) wlan0 renamed to wlan1 udev: renamed network interface wlan0 to wlan1 @@ -702,24 +696,16 @@ serial 00:06: disabled ath5k 0000:04:00.0: PCI INT A disabled ACPI handle has no context! -ehci_hcd 0000:00:1d.7: PME# enabled -ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI ehci_hcd 0000:00:1d.7: PCI INT A disabled -uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI +ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT D disabled -uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI uhci_hcd 0000:00:1d.1: PCI INT B disabled -uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A disabled -ehci_hcd 0000:00:1a.7: PME# enabled -ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI ehci_hcd 0000:00:1a.7: PCI INT D disabled -uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI +ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled -uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI uhci_hcd 0000:00:1a.1: PCI INT B disabled -uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI @@ -748,6 +734,13 @@ pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0xe401) pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0xe481) pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0xe801) +serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a) +serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xffa7a000) +e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10e) +e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xdc01) +e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xffa79000) +e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xffa40000) +e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) @@ -756,27 +749,36 @@ HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) -pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100500) +pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504) pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x20300, writing 0x2030c) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) -pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100106, writing 0x100502) +pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) -pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) +ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) pci 0000:00:1f.6: restoring config space at offset 0xb (was 0x0, writing 0x29328086) pci 0000:02:00.0: restoring config space at offset 0x7 (was 0x2a001f1, writing 0x22a001f1) -pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100116, writing 0x100112) +firewire_ohci 0000:03:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010c) +firewire_ohci 0000:03:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xff5f8000) +firewire_ohci 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff5ff800) +firewire_ohci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) +firewire_ohci 0000:03:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300016) +ath5k 0000:04:00.0: restoring config space at offset 0xf (was 0x1c0a0100, writing 0x1c0a0103) +ath5k 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff6f0000) +ath5k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0xa808) +ath5k 0000:04:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900016) Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 5985.15 BogoMIPS (lpj=11970311) +Calibrating delay using timer specific routine.. 5984.91 BogoMIPS (lpj=11969836) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) @@ -790,13 +792,6 @@ pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: PME# disabled pci 0000:00:03.2: PME# disabled -serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a) -serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xffa7a000) -e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10e) -e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xdc01) -e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xffa79000) -e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xffa40000) -e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI @@ -806,61 +801,45 @@ e1000e 0000:00:19.0: irq 26 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 -uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 -uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 -uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI usb usb5: root hub lost power or was reset +ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 -ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 -pcieport-driver 0000:00:1c.0: setting latency timer to 64 -pcieport-driver 0000:00:1c.2: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 -uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 -uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI usb usb7: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.2: setting latency timer to 64 -uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI usb usb8: root hub lost power or was reset +ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 -ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 -ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) ahci 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.6: PME# disabled pci 0000:02:00.0: setting latency timer to 64 -firewire_ohci 0000:03:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010c) -firewire_ohci 0000:03:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xff5f8000) -firewire_ohci 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff5ff800) -firewire_ohci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) -firewire_ohci 0000:03:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300016) -ath5k 0000:04:00.0: restoring config space at offset 0xf (was 0x1c0a0100, writing 0x1c0a0103) -ath5k 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff6f0000) -ath5k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0xa808) -ath5k 0000:04:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900016) +firewire_core: skipped bus generations, destroying all nodes ath5k 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 serial 00:06: activated parport_pc 00:08: activated sd 0:0:0:0: [sda] Starting disk +ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) -ata5: SATA link down (SStatus 0 SControl 300) +firewire_core: rediscovered device fw0 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) @@ -894,3 +873,20 @@ usb 6-1.1: reset full speed USB device using uhci_hcd and address 3 usb 6-1.2: reset low speed USB device using uhci_hcd and address 4 Restarting tasks ... done. +usb 6-1: USB disconnect, address 2 +usb 6-1.1: USB disconnect, address 3 +usb 6-1.2: USB disconnect, address 4 +usb 6-1: new full speed USB device using uhci_hcd and address 5 +usb 6-1: configuration #1 chosen from 1 choice +hub 6-1:1.0: USB hub found +hub 6-1:1.0: 3 ports detected +usb 6-1.1: new full speed USB device using uhci_hcd and address 6 +usb 6-1.1: configuration #1 chosen from 1 choice +input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input13 +generic-usb 0003:0458:004C.0004: input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input0 +input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input14 +generic-usb 0003:0458:004C.0005: input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input1 +usb 6-1.2: new low speed USB device using uhci_hcd and address 7 +usb 6-1.2: configuration #1 chosen from 1 choice +input: Microsoft Corporation Microsoft � Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input15 +generic-usb 0003:045E:00F0.0006: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft � Laser Mouse 6000] on usb-0000:00:1d.0-1.2/input0 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] 2009-02-11 8:44 ` Jiri Slaby (?) @ 2009-02-11 9:44 ` Rafael J. Wysocki 2009-02-11 9:54 ` Jiri Slaby -1 siblings, 1 reply; 44+ messages in thread From: Rafael J. Wysocki @ 2009-02-11 9:44 UTC (permalink / raw) To: Jiri Slaby Cc: linux-kernel, mm-commits, Greg KH, USB list, Alan Stern, linux-input On Wednesday 11 February 2009, Jiri Slaby wrote: > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > Hi, > > when I resume from suspend, USB mouse and kbd are not responding anymore, no > LEDs, nothing. I need to unplug and replug to get it working. This is a > regression since mmotm based on 2.6.29-rc2 which is fine. > > Any ideas before I start bisection? Please test current mainline, it may be a regression in there. How exactly are the failing devices connected to the box? Rafael ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 9:54 ` Jiri Slaby 0 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 9:54 UTC (permalink / raw) To: Rafael J. Wysocki Cc: linux-kernel, mm-commits, Greg KH, USB list, Alan Stern, linux-input On 02/11/2009 10:44 AM, Rafael J. Wysocki wrote: > Please test current mainline, it may be a regression in there. OK, will do. > How exactly are the failing devices connected to the box? There is a hub in the kbd. The mouse and kbd is behind it, I suppose: /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 12M |__ Port 1: Dev 3, If 0, Class=HID, Driver=usbhid, 12M |__ Port 1: Dev 3, If 1, Class=HID, Driver=usbhid, 12M |__ Port 2: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M There is also a wheel at 6.3 if 1... Bus 006 Device 004: ID 045e:00f0 Microsoft Corp. Bus 006 Device 003: ID 0458:004c KYE Systems Corp. (Mouse Systems) Slimstar Pro Keyboard Bus 006 Device 002: ID 04b4:2050 Cypress Semiconductor Corp. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I may try to plug the mouse directly to the root hub if it might help anyhow. ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 9:54 ` Jiri Slaby 0 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 9:54 UTC (permalink / raw) To: Rafael J. Wysocki Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, mm-commits-u79uwXL29TY76Z2rM5mHXA, Greg KH, USB list, Alan Stern, linux-input-u79uwXL29TY76Z2rM5mHXA On 02/11/2009 10:44 AM, Rafael J. Wysocki wrote: > Please test current mainline, it may be a regression in there. OK, will do. > How exactly are the failing devices connected to the box? There is a hub in the kbd. The mouse and kbd is behind it, I suppose: /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 12M |__ Port 1: Dev 3, If 0, Class=HID, Driver=usbhid, 12M |__ Port 1: Dev 3, If 1, Class=HID, Driver=usbhid, 12M |__ Port 2: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M There is also a wheel at 6.3 if 1... Bus 006 Device 004: ID 045e:00f0 Microsoft Corp. Bus 006 Device 003: ID 0458:004c KYE Systems Corp. (Mouse Systems) Slimstar Pro Keyboard Bus 006 Device 002: ID 04b4:2050 Cypress Semiconductor Corp. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I may try to plug the mouse directly to the root hub if it might help anyhow. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 13:38 ` Jiri Slaby 0 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 13:38 UTC (permalink / raw) To: Rafael J. Wysocki Cc: linux-kernel, mm-commits, Greg KH, USB list, Alan Stern, linux-input On 02/11/2009 10:54 AM, Jiri Slaby wrote: > On 02/11/2009 10:44 AM, Rafael J. Wysocki wrote: >> Please test current mainline, it may be a regression in there. > > OK, will do. I was not able to reproduce it with 1db8508. So it highly likely hasn't leaked to the mainline. >> How exactly are the failing devices connected to the box? > > There is a hub in the kbd. The mouse and kbd is behind it, I suppose: > > /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 12M > |__ Port 1: Dev 3, If 0, Class=HID, Driver=usbhid, 12M > |__ Port 1: Dev 3, If 1, Class=HID, Driver=usbhid, 12M > |__ Port 2: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M > /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M > > There is also a wheel at 6.3 if 1... > > Bus 006 Device 004: ID 045e:00f0 Microsoft Corp. > Bus 006 Device 003: ID 0458:004c KYE Systems Corp. (Mouse Systems) Slimstar Pro > Keyboard > Bus 006 Device 002: ID 04b4:2050 Cypress Semiconductor Corp. > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > I may try to plug the mouse directly to the root hub if it might help anyhow. No change. Wherever it is connected it fails to emit anything. BTW It is sufficient to unplug the mouse from the kbd (i.e. the hub) and replug it back. ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 13:38 ` Jiri Slaby 0 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 13:38 UTC (permalink / raw) To: Rafael J. Wysocki Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, mm-commits-u79uwXL29TY76Z2rM5mHXA, Greg KH, USB list, Alan Stern, linux-input-u79uwXL29TY76Z2rM5mHXA On 02/11/2009 10:54 AM, Jiri Slaby wrote: > On 02/11/2009 10:44 AM, Rafael J. Wysocki wrote: >> Please test current mainline, it may be a regression in there. > > OK, will do. I was not able to reproduce it with 1db8508. So it highly likely hasn't leaked to the mainline. >> How exactly are the failing devices connected to the box? > > There is a hub in the kbd. The mouse and kbd is behind it, I suppose: > > /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 12M > |__ Port 1: Dev 3, If 0, Class=HID, Driver=usbhid, 12M > |__ Port 1: Dev 3, If 1, Class=HID, Driver=usbhid, 12M > |__ Port 2: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M > /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M > > There is also a wheel at 6.3 if 1... > > Bus 006 Device 004: ID 045e:00f0 Microsoft Corp. > Bus 006 Device 003: ID 0458:004c KYE Systems Corp. (Mouse Systems) Slimstar Pro > Keyboard > Bus 006 Device 002: ID 04b4:2050 Cypress Semiconductor Corp. > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > I may try to plug the mouse directly to the root hub if it might help anyhow. No change. Wherever it is connected it fails to emit anything. BTW It is sufficient to unplug the mouse from the kbd (i.e. the hub) and replug it back. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 21:49 ` Rafael J. Wysocki 0 siblings, 0 replies; 44+ messages in thread From: Rafael J. Wysocki @ 2009-02-11 21:49 UTC (permalink / raw) To: Jiri Slaby Cc: linux-kernel, mm-commits, Greg KH, USB list, Alan Stern, linux-input On Wednesday 11 February 2009, Jiri Slaby wrote: > On 02/11/2009 10:54 AM, Jiri Slaby wrote: > > On 02/11/2009 10:44 AM, Rafael J. Wysocki wrote: > >> Please test current mainline, it may be a regression in there. > > > > OK, will do. > > I was not able to reproduce it with 1db8508. So it highly likely hasn't leaked > to the mainline. Great, thanks for verifying! > >> How exactly are the failing devices connected to the box? > > > > There is a hub in the kbd. The mouse and kbd is behind it, I suppose: > > > > /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 12M > > |__ Port 1: Dev 3, If 0, Class=HID, Driver=usbhid, 12M > > |__ Port 1: Dev 3, If 1, Class=HID, Driver=usbhid, 12M > > |__ Port 2: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M > > /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M > > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M > > > > There is also a wheel at 6.3 if 1... > > > > Bus 006 Device 004: ID 045e:00f0 Microsoft Corp. > > Bus 006 Device 003: ID 0458:004c KYE Systems Corp. (Mouse Systems) Slimstar Pro > > Keyboard > > Bus 006 Device 002: ID 04b4:2050 Cypress Semiconductor Corp. > > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > > I may try to plug the mouse directly to the root hub if it might help anyhow. > > No change. Wherever it is connected it fails to emit anything. > > BTW It is sufficient to unplug the mouse from the kbd (i.e. the hub) and replug > it back. Well, I thought it might be an ordering issue, but apparently it isn't. Thanks, Rafael ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 21:49 ` Rafael J. Wysocki 0 siblings, 0 replies; 44+ messages in thread From: Rafael J. Wysocki @ 2009-02-11 21:49 UTC (permalink / raw) To: Jiri Slaby Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, mm-commits-u79uwXL29TY76Z2rM5mHXA, Greg KH, USB list, Alan Stern, linux-input-u79uwXL29TY76Z2rM5mHXA On Wednesday 11 February 2009, Jiri Slaby wrote: > On 02/11/2009 10:54 AM, Jiri Slaby wrote: > > On 02/11/2009 10:44 AM, Rafael J. Wysocki wrote: > >> Please test current mainline, it may be a regression in there. > > > > OK, will do. > > I was not able to reproduce it with 1db8508. So it highly likely hasn't leaked > to the mainline. Great, thanks for verifying! > >> How exactly are the failing devices connected to the box? > > > > There is a hub in the kbd. The mouse and kbd is behind it, I suppose: > > > > /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 12M > > |__ Port 1: Dev 3, If 0, Class=HID, Driver=usbhid, 12M > > |__ Port 1: Dev 3, If 1, Class=HID, Driver=usbhid, 12M > > |__ Port 2: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M > > /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M > > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M > > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M > > > > There is also a wheel at 6.3 if 1... > > > > Bus 006 Device 004: ID 045e:00f0 Microsoft Corp. > > Bus 006 Device 003: ID 0458:004c KYE Systems Corp. (Mouse Systems) Slimstar Pro > > Keyboard > > Bus 006 Device 002: ID 04b4:2050 Cypress Semiconductor Corp. > > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > > I may try to plug the mouse directly to the root hub if it might help anyhow. > > No change. Wherever it is connected it fails to emit anything. > > BTW It is sufficient to unplug the mouse from the kbd (i.e. the hub) and replug > it back. Well, I thought it might be an ordering issue, but apparently it isn't. Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 15:53 ` Alan Stern 0 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2009-02-11 15:53 UTC (permalink / raw) To: Jiri Slaby; +Cc: linux-kernel, mm-commits, Greg KH, USB list, linux-input On Wed, 11 Feb 2009, Jiri Slaby wrote: > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > Hi, > > when I resume from suspend, USB mouse and kbd are not responding anymore, no > LEDs, nothing. I need to unplug and replug to get it working. This is a > regression since mmotm based on 2.6.29-rc2 which is fine. > > Any ideas before I start bisection? In theory the lack of S4 support shouldn't cause this to happen. You might want to build a kernel with CONFIG_USB_DEBUG enabled. The extra debugging information should help find the problem. Alan Stern ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-11 15:53 ` Alan Stern 0 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2009-02-11 15:53 UTC (permalink / raw) To: Jiri Slaby Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, mm-commits-u79uwXL29TY76Z2rM5mHXA, Greg KH, USB list, linux-input-u79uwXL29TY76Z2rM5mHXA On Wed, 11 Feb 2009, Jiri Slaby wrote: > On 02/11/2009 01:36 AM, akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org wrote: > > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > Hi, > > when I resume from suspend, USB mouse and kbd are not responding anymore, no > LEDs, nothing. I need to unplug and replug to get it working. This is a > regression since mmotm based on 2.6.29-rc2 which is fine. > > Any ideas before I start bisection? In theory the lack of S4 support shouldn't cause this to happen. You might want to build a kernel with CONFIG_USB_DEBUG enabled. The extra debugging information should help find the problem. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] 2009-02-11 15:53 ` Alan Stern @ 2009-02-13 10:40 ` Jiri Slaby -1 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-13 10:40 UTC (permalink / raw) To: Alan Stern Cc: linux-kernel, mm-commits, Greg KH, USB list, linux-input, Oliver Neukum On 02/11/2009 04:53 PM, Alan Stern wrote: > On Wed, 11 Feb 2009, Jiri Slaby wrote: > >> On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: >>> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded >> Hi, >> >> when I resume from suspend, USB mouse and kbd are not responding anymore, no >> LEDs, nothing. I need to unplug and replug to get it working. This is a >> regression since mmotm based on 2.6.29-rc2 which is fine. >> >> Any ideas before I start bisection? > > In theory the lack of S4 support shouldn't cause this to happen. > > You might want to build a kernel with CONFIG_USB_DEBUG enabled. The > extra debugging information should help find the problem. Here comes the resume part (including unplug, replug). I suspect auto-suspend? usb usb1: usb resume ehci_hcd 0000:00:1a.7: resume root hub hub 1-0:1.0: hub_resume usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub hub 2-0:1.0: hub_resume usb usb6: usb resume usb usb6: wakeup_rh hub 6-0:1.0: hub_reset_resume hub 6-0:1.0: trying to enable port power on non-switchable hub uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 hub 6-0:1.0: port 1: status 0101 change 0003 usb 6-1: finish reset-resume usb 6-1: reset full speed USB device using uhci_hcd and address 2 usb 6-1: ep0 maxpacket = 8 usb 6-1: manual set_interface for iface 0, alt 0 hub 6-1:1.0: hub_reset_resume hub 6-1:1.0: enabling power on all ports hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us usb 6-1.1: finish reset-resume usb 6-1.1: reset full speed USB device using uhci_hcd and address 3 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: manual set_interface for iface 0, alt 0 usb 6-1.1: manual set_interface for iface 1, alt 0 usb 6-1.2: finish reset-resume usb 6-1.2: reset low speed USB device using uhci_hcd and address 4 usb 6-1.2: manual set_interface for iface 0, alt 0 Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0002 hub 6-0:1.0: port 1, status 0103, change 0000, 12 Mb/s hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0004 done. hub 6-1:1.0: port 1, status 0103, change 0000, 12 Mb/s hub 6-1:1.0: port 2, status 0303, change 0000, 1.5 Mb/s hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1a.7: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00 hub 6-0:1.0: port 1, status 0100, change 0003, 12 Mb/s usb 6-1: USB disconnect, address 2 usb 6-1.1: USB disconnect, address 3 usb 6-1.1: unregistering device usb 6-1.1: usb_disable_device nuking all URBs usb 6-1.1: unregistering interface 6-1.1:1.0 usb 6-1.1:1.0: uevent usb 6-1.1: unregistering interface 6-1.1:1.1 usb 6-1.1:1.1: uevent usb 6-1.1: uevent usb 6-1.2: USB disconnect, address 4 usb 6-1.2: unregistering device usb 6-1.2: usb_disable_device nuking all URBs usb 6-1.2: unregistering interface 6-1.2:1.0 usb 6-1.2:1.0: uevent usb 6-1.2: uevent usb 6-1: unregistering device usb 6-1: usb_disable_device nuking all URBs uhci_hcd 0000:00:1d.0: shutdown urb ffff88007c8ca540 ep1in-intr uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 128, phase 0, 12 us usb 6-1: unregistering interface 6-1:1.0 usb 6-1:1.0: uevent usb 6-1: uevent hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub ehci_hcd 0000:00:1d.7: port 1 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00 hub 6-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 6-1: new full speed USB device using uhci_hcd and address 5 usb 6-1: ep0 maxpacket = 8 usb 6-1: default language 0x0409 usb 6-1: New USB device found, idVendor=04b4, idProduct=2050 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: GBella Corporation DV Keyboard usb 6-1: Manufacturer: Bella Corporation usb 6-1: uevent usb 6-1: usb_probe_device usb 6-1: configuration #1 chosen from 1 choice usb 6-1: adding 6-1:1.0 (config #1, interface 0) usb 6-1:1.0: uevent hub 6-1:1.0: usb_probe_interface hub 6-1:1.0: usb_probe_interface - got id hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected hub 6-1:1.0: compound device; port removable status: FRR hub 6-1:1.0: individual port power switching hub 6-1:1.0: individual port over-current protection hub 6-1:1.0: power on to power good time: 100ms hub 6-1:1.0: hub controller current requirement: 25mA hub 6-1:1.0: 100mA bus power budget for each child hub 6-1:1.0: local power source is good hub 6-1:1.0: enabling power on all ports /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '005' hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 5 ep81-INT, period 128, phase 0, 12 us hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0000 hub 6-1:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 6-1.1: new full speed USB device using uhci_hcd and address 6 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: default language 0x0409 usb 6-1.1: New USB device found, idVendor=0458, idProduct=004c usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.1: Product: USB Keyboard usb 6-1.1: Manufacturer: ABBHOME usb 6-1.1: uevent usb 6-1.1: usb_probe_device usb 6-1.1: configuration #1 chosen from 1 choice usb 6-1.1: adding 6-1.1:1.0 (config #1, interface 0) usb 6-1.1:1.0: uevent usbhid 6-1.1:1.0: usb_probe_interface usbhid 6-1.1:1.0: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input13 uhci_hcd 0000:00:1d.0: reserve dev 6 ep81-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0004: input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input0 usb 6-1.1: adding 6-1.1:1.1 (config #1, interface 1) usb 6-1.1:1.1: uevent usbhid 6-1.1:1.1: usb_probe_interface usbhid 6-1.1:1.1: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input14 uhci_hcd 0000:00:1d.0: reserve dev 6 ep82-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0005: input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input1 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '006' hub 6-1:1.0: 425mA power budget left hub 6-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s usb 6-1.2: new low speed USB device using uhci_hcd and address 7 usb 6-1.2: skipped 1 descriptor after interface usb 6-1.2: default language 0x0409 usb 6-1.2: New USB device found, idVendor=045e, idProduct=00f0 usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.2: Product: Microsoft � Laser Mouse 6000 usb 6-1.2: Manufacturer: Microsoft Corporation usb 6-1.2: uevent usb 6-1.2: usb_probe_device usb 6-1.2: configuration #1 chosen from 1 choice usb 6-1.2: adding 6-1.2:1.0 (config #1, interface 0) usb 6-1.2:1.0: uevent usbhid 6-1.2:1.0: usb_probe_interface usbhid 6-1.2:1.0: usb_probe_interface - got id input: Microsoft Corporation Microsoft � Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input15 uhci_hcd 0000:00:1d.0: reserve dev 7 ep81-INT, period 8, phase 4, 93 us generic-usb 0003:045E:00F0.0006: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft � Laser Mouse 6000] on usb-0000:00:1d.0-1.2/input0 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '007' hub 6-1:1.0: 325mA power budget left hub 6-1:1.0: state 7 ports 3 chg 0000 evt 0004 hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-13 10:40 ` Jiri Slaby 0 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-13 10:40 UTC (permalink / raw) To: Alan Stern Cc: linux-kernel, mm-commits, Greg KH, USB list, linux-input, Oliver Neukum On 02/11/2009 04:53 PM, Alan Stern wrote: > On Wed, 11 Feb 2009, Jiri Slaby wrote: > >> On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: >>> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded >> Hi, >> >> when I resume from suspend, USB mouse and kbd are not responding anymore, no >> LEDs, nothing. I need to unplug and replug to get it working. This is a >> regression since mmotm based on 2.6.29-rc2 which is fine. >> >> Any ideas before I start bisection? > > In theory the lack of S4 support shouldn't cause this to happen. > > You might want to build a kernel with CONFIG_USB_DEBUG enabled. The > extra debugging information should help find the problem. Here comes the resume part (including unplug, replug). I suspect auto-suspend? usb usb1: usb resume ehci_hcd 0000:00:1a.7: resume root hub hub 1-0:1.0: hub_resume usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub hub 2-0:1.0: hub_resume usb usb6: usb resume usb usb6: wakeup_rh hub 6-0:1.0: hub_reset_resume hub 6-0:1.0: trying to enable port power on non-switchable hub uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 hub 6-0:1.0: port 1: status 0101 change 0003 usb 6-1: finish reset-resume usb 6-1: reset full speed USB device using uhci_hcd and address 2 usb 6-1: ep0 maxpacket = 8 usb 6-1: manual set_interface for iface 0, alt 0 hub 6-1:1.0: hub_reset_resume hub 6-1:1.0: enabling power on all ports hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us usb 6-1.1: finish reset-resume usb 6-1.1: reset full speed USB device using uhci_hcd and address 3 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: manual set_interface for iface 0, alt 0 usb 6-1.1: manual set_interface for iface 1, alt 0 usb 6-1.2: finish reset-resume usb 6-1.2: reset low speed USB device using uhci_hcd and address 4 usb 6-1.2: manual set_interface for iface 0, alt 0 Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0002 hub 6-0:1.0: port 1, status 0103, change 0000, 12 Mb/s hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0004 done. hub 6-1:1.0: port 1, status 0103, change 0000, 12 Mb/s hub 6-1:1.0: port 2, status 0303, change 0000, 1.5 Mb/s hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1a.7: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00 hub 6-0:1.0: port 1, status 0100, change 0003, 12 Mb/s usb 6-1: USB disconnect, address 2 usb 6-1.1: USB disconnect, address 3 usb 6-1.1: unregistering device usb 6-1.1: usb_disable_device nuking all URBs usb 6-1.1: unregistering interface 6-1.1:1.0 usb 6-1.1:1.0: uevent usb 6-1.1: unregistering interface 6-1.1:1.1 usb 6-1.1:1.1: uevent usb 6-1.1: uevent usb 6-1.2: USB disconnect, address 4 usb 6-1.2: unregistering device usb 6-1.2: usb_disable_device nuking all URBs usb 6-1.2: unregistering interface 6-1.2:1.0 usb 6-1.2:1.0: uevent usb 6-1.2: uevent usb 6-1: unregistering device usb 6-1: usb_disable_device nuking all URBs uhci_hcd 0000:00:1d.0: shutdown urb ffff88007c8ca540 ep1in-intr uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 128, phase 0, 12 us usb 6-1: unregistering interface 6-1:1.0 usb 6-1:1.0: uevent usb 6-1: uevent hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub ehci_hcd 0000:00:1d.7: port 1 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00 hub 6-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 6-1: new full speed USB device using uhci_hcd and address 5 usb 6-1: ep0 maxpacket = 8 usb 6-1: default language 0x0409 usb 6-1: New USB device found, idVendor=04b4, idProduct=2050 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: GBella Corporation DV Keyboard usb 6-1: Manufacturer: Bella Corporation usb 6-1: uevent usb 6-1: usb_probe_device usb 6-1: configuration #1 chosen from 1 choice usb 6-1: adding 6-1:1.0 (config #1, interface 0) usb 6-1:1.0: uevent hub 6-1:1.0: usb_probe_interface hub 6-1:1.0: usb_probe_interface - got id hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected hub 6-1:1.0: compound device; port removable status: FRR hub 6-1:1.0: individual port power switching hub 6-1:1.0: individual port over-current protection hub 6-1:1.0: power on to power good time: 100ms hub 6-1:1.0: hub controller current requirement: 25mA hub 6-1:1.0: 100mA bus power budget for each child hub 6-1:1.0: local power source is good hub 6-1:1.0: enabling power on all ports /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '005' hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 5 ep81-INT, period 128, phase 0, 12 us hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0000 hub 6-1:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 6-1.1: new full speed USB device using uhci_hcd and address 6 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: default language 0x0409 usb 6-1.1: New USB device found, idVendor=0458, idProduct=004c usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.1: Product: USB Keyboard usb 6-1.1: Manufacturer: ABBHOME usb 6-1.1: uevent usb 6-1.1: usb_probe_device usb 6-1.1: configuration #1 chosen from 1 choice usb 6-1.1: adding 6-1.1:1.0 (config #1, interface 0) usb 6-1.1:1.0: uevent usbhid 6-1.1:1.0: usb_probe_interface usbhid 6-1.1:1.0: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input13 uhci_hcd 0000:00:1d.0: reserve dev 6 ep81-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0004: input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input0 usb 6-1.1: adding 6-1.1:1.1 (config #1, interface 1) usb 6-1.1:1.1: uevent usbhid 6-1.1:1.1: usb_probe_interface usbhid 6-1.1:1.1: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input14 uhci_hcd 0000:00:1d.0: reserve dev 6 ep82-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0005: input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input1 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '006' hub 6-1:1.0: 425mA power budget left hub 6-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s usb 6-1.2: new low speed USB device using uhci_hcd and address 7 usb 6-1.2: skipped 1 descriptor after interface usb 6-1.2: default language 0x0409 usb 6-1.2: New USB device found, idVendor=045e, idProduct=00f0 usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.2: Product: Microsoft � Laser Mouse 6000 usb 6-1.2: Manufacturer: Microsoft Corporation usb 6-1.2: uevent usb 6-1.2: usb_probe_device usb 6-1.2: configuration #1 chosen from 1 choice usb 6-1.2: adding 6-1.2:1.0 (config #1, interface 0) usb 6-1.2:1.0: uevent usbhid 6-1.2:1.0: usb_probe_interface usbhid 6-1.2:1.0: usb_probe_interface - got id input: Microsoft Corporation Microsoft � Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input15 uhci_hcd 0000:00:1d.0: reserve dev 7 ep81-INT, period 8, phase 4, 93 us generic-usb 0003:045E:00F0.0006: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft � Laser Mouse 6000] on usb-0000:00:1d.0-1.2/input0 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '007' hub 6-1:1.0: 325mA power budget left hub 6-1:1.0: state 7 ports 3 chg 0000 evt 0004 hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] 2009-02-13 10:40 ` Jiri Slaby @ 2009-02-13 15:26 ` Alan Stern -1 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2009-02-13 15:26 UTC (permalink / raw) To: Jiri Slaby Cc: Kernel development list, mm-commits, Greg KH, USB list, linux-input, Oliver Neukum On Fri, 13 Feb 2009, Jiri Slaby wrote: > > You might want to build a kernel with CONFIG_USB_DEBUG enabled. The > > extra debugging information should help find the problem. > > Here comes the resume part (including unplug, replug). I suspect auto-suspend? I don't think autosuspend is the issue, because normally neither keyboards nor mice get autosuspended. In fact the log appears to be perfectly correct; I don't see any errors in it. So the problem must be lower down, such as in the usbhid driver. The best way to track this is to use usbmon. Here's what I'd like you to do: After booting, unplug the mouse/keyboard. Then do "dmesg -c >/dev/null" to clear the kernel log buffer. Start up usbmon, looking at bus 6 (or whichever bus the mouse/keyboard was plugged into). If you don't have any other keyboard to use for this then do it via a network login. Plug in the mouse/keyboard. Press a key to verify that the keyboard is working, but otherwise don't use either device. Go through a suspend/resume cycle (again using the network link if you don't have another keyboard). Type another key to verify that the keyboard isn't working. Unplug the keyboard/mouse and plug them back in. Type a third key to verify that now the keyboard is working again. Stop the usbmon trace and post the resulting file along with the dmesg log. Alan Stern ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-13 15:26 ` Alan Stern 0 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2009-02-13 15:26 UTC (permalink / raw) To: Jiri Slaby Cc: Kernel development list, mm-commits, Greg KH, USB list, linux-input, Oliver Neukum On Fri, 13 Feb 2009, Jiri Slaby wrote: > > You might want to build a kernel with CONFIG_USB_DEBUG enabled. The > > extra debugging information should help find the problem. > > Here comes the resume part (including unplug, replug). I suspect auto-suspend? I don't think autosuspend is the issue, because normally neither keyboards nor mice get autosuspended. In fact the log appears to be perfectly correct; I don't see any errors in it. So the problem must be lower down, such as in the usbhid driver. The best way to track this is to use usbmon. Here's what I'd like you to do: After booting, unplug the mouse/keyboard. Then do "dmesg -c >/dev/null" to clear the kernel log buffer. Start up usbmon, looking at bus 6 (or whichever bus the mouse/keyboard was plugged into). If you don't have any other keyboard to use for this then do it via a network login. Plug in the mouse/keyboard. Press a key to verify that the keyboard is working, but otherwise don't use either device. Go through a suspend/resume cycle (again using the network link if you don't have another keyboard). Type another key to verify that the keyboard isn't working. Unplug the keyboard/mouse and plug them back in. Type a third key to verify that now the keyboard is working again. Stop the usbmon trace and post the resulting file along with the dmesg log. Alan Stern ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] 2009-02-13 15:26 ` Alan Stern @ 2009-02-16 13:50 ` Jiri Slaby -1 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-16 13:50 UTC (permalink / raw) To: Alan Stern Cc: Kernel development list, mm-commits, Greg KH, USB list, linux-input, Oliver Neukum Alan Stern wrote: > So the problem must be lower down, such as in the usbhid driver. The > best way to track this is to use usbmon. Well, there is some traffic after resume, but nothing when pressing keys... > Stop the usbmon trace and post the resulting file along > with the dmesg log. ffff88007c166780 2279165031 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007c166780 2279165042 C Ci:6:001:0 0 4 = 01010100 ffff88007c166780 2279165045 S Co:6:001:0 s 23 01 0010 0001 0000 0 ffff88007c166780 2279165049 C Co:6:001:0 0 0 ffff88007c166780 2279165050 S Ci:6:001:0 s a3 00 0000 0002 0004 4 < ffff88007c166780 2279165055 C Ci:6:001:0 0 4 = 00010000 ffff88007c183d80 2279270034 S Ii:6:001:1 -115:128 2 < ffff88007c166780 2279270043 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007c166780 2279270047 C Ci:6:001:0 0 4 = 01010000 ffff88007c166780 2279270055 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007c166780 2279270059 C Co:6:001:0 0 0 ffff88007c166780 2279325063 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007c166780 2279325085 C Ci:6:001:0 0 4 = 03010000 ffff88007c166780 2279381027 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007c166780 2279381029 C Co:6:001:0 0 0 ffff88007c166780 2279381033 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007c166780 2279384059 C Ci:6:000:0 0 8 = 12011001 09000008 ffff88007c166780 2279384068 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007c166780 2279384072 C Co:6:001:0 0 0 ffff88007c166780 2279437062 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007c166780 2279437084 C Ci:6:001:0 0 4 = 03010000 ffff88007c166780 2279493037 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007c166780 2279493039 C Co:6:001:0 0 0 ffff88007c166780 2279493041 S Co:6:000:0 s 00 05 0005 0000 0000 0 ffff88007c166780 2279495060 C Co:6:000:0 0 0 ffff88007b1bb840 2279513027 S Ci:6:005:0 s 80 06 0100 0000 0012 18 < ffff88007b1bb840 2279518061 C Ci:6:005:0 0 18 = 12011001 09000008 b4045020 01000102 0001 ffff88007b1bb840 2279518071 S Ci:6:005:0 s 80 06 0200 0000 0009 9 < ffff88007b1bb840 2279523060 C Ci:6:005:0 0 9 = 09021900 010100e0 32 ffff88007b1bb840 2279523067 S Ci:6:005:0 s 80 06 0200 0000 0019 25 < ffff88007b1bb840 2279530061 C Ci:6:005:0 0 25 = 09021900 010100e0 32090400 00010900 00000705 81030100 ff ffff88007b1bb840 2279530072 S Ci:6:005:0 s 80 06 0300 0000 00ff 255 < ffff88007b1bb840 2279535060 C Ci:6:005:0 0 4 = 04030904 ffff88007b1bb840 2279535069 S Ci:6:005:0 s 80 06 0302 0409 00ff 255 < ffff88007b1bb840 2279547061 C Ci:6:005:0 0 62 = 3e034700 42006500 6c006c00 61002000 43006f00 72007000 6f007200 61007400 ffff88007b1bb840 2279547070 S Ci:6:005:0 s 80 06 0301 0409 00ff 255 < ffff88007b1bb840 2279556060 C Ci:6:005:0 0 36 = 24034200 65006c00 6c006100 20004300 6f007200 70006f00 72006100 74006900 ffff88007bb8ac00 2279556150 S Co:6:005:0 s 00 09 0001 0000 0000 0 ffff88007bb8ac00 2279559063 C Co:6:005:0 0 0 ffff88007bb8a540 2279559112 S Ci:6:005:0 s a0 06 2900 0000 000f 15 < ffff88007bb8a540 2279561063 C Ci:6:005:0 0 9 = 0929030d 00321902 ff ffff88007bb8a540 2279561094 S Ci:6:005:0 s 80 00 0000 0000 0002 2 < ffff88007bb8a540 2279562061 C Ci:6:005:0 0 2 = 0000 ffff88007bb8a540 2279562071 S Ci:6:005:0 s a0 00 0000 0000 0004 4 < ffff88007bb8a540 2279563061 C Ci:6:005:0 0 4 = 00000000 ffff88007b3d96c0 2279563067 S Co:6:005:0 s 23 03 0008 0001 0000 0 ffff88007b3d96c0 2279564062 C Co:6:005:0 0 0 ffff88007b3d96c0 2279564070 S Co:6:005:0 s 23 03 0008 0002 0000 0 ffff88007b3d96c0 2279565060 C Co:6:005:0 0 0 ffff88007b3d96c0 2279565429 S Co:6:005:0 s 23 03 0008 0003 0000 0 ffff88007b3d96c0 2279566062 C Co:6:005:0 0 0 ffff88007b3d93c0 2279665021 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b3d93c0 2279666063 C Ci:6:005:0 0 4 = 01010100 ffff88007b3d93c0 2279666073 S Co:6:005:0 s 23 01 0010 0001 0000 0 ffff88007b3d93c0 2279667063 C Co:6:005:0 0 0 ffff88007b3d93c0 2279667070 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff88007b3d93c0 2279668063 C Ci:6:005:0 0 4 = 01030100 ffff88007b3d93c0 2279668072 S Co:6:005:0 s 23 01 0010 0002 0000 0 ffff88007b3d93c0 2279669062 C Co:6:005:0 0 0 ffff88007b3d93c0 2279669189 S Ci:6:005:0 s a3 00 0000 0003 0004 4 < ffff88007b3d93c0 2279670063 C Ci:6:005:0 0 4 = 00010000 ffff88007bb8a540 2279769018 S Ii:6:005:1 -115:128 1 < ffff88007b3d93c0 2279769031 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b3d93c0 2279770065 C Ci:6:005:0 0 4 = 01010000 ffff88007b3d93c0 2279770078 S Co:6:005:0 s 23 03 0004 0001 0000 0 ffff88007b3d93c0 2279771065 C Co:6:005:0 0 0 ffff88007b3d93c0 2279785033 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b3d93c0 2279786065 C Ci:6:005:0 0 4 = 03011000 ffff88007bb8a540 2279810065 C Ii:6:005:1 0:128 1 = 02 ffff88007bb8a540 2279810068 S Ii:6:005:1 -115:128 1 < ffff88007b3d93c0 2279841028 S Co:6:005:0 s 23 01 0014 0001 0000 0 ffff88007b3d93c0 2279842066 C Co:6:005:0 0 0 ffff88007b3d93c0 2279842076 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007b3d93c0 2279846065 C Ci:6:000:0 0 8 = 12011001 00000008 ffff88007b3d93c0 2279846073 S Co:6:005:0 s 23 03 0004 0001 0000 0 ffff88007b3d93c0 2279847067 C Co:6:005:0 0 0 ffff88007b3d93c0 2279861022 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b3d93c0 2279862067 C Ci:6:005:0 0 4 = 03011000 ffff88007b3d93c0 2279917018 S Co:6:005:0 s 23 01 0014 0001 0000 0 ffff88007b3d93c0 2279918067 C Co:6:005:0 0 0 ffff88007b3d93c0 2279918073 S Co:6:000:0 s 00 05 0006 0000 0000 0 ffff88007b3d93c0 2279921067 C Co:6:000:0 0 0 ffff88007c166780 2279937036 S Ci:6:006:0 s 80 06 0100 0000 0012 18 < ffff88007c166780 2279942068 C Ci:6:006:0 0 18 = 12011001 00000008 58044c00 01010102 0001 ffff88007c166780 2279942078 S Ci:6:006:0 s 80 06 0200 0000 0009 9 < ffff88007c166780 2279947067 C Ci:6:006:0 0 9 = 09023b00 020100e0 19 ffff88007c166780 2279947075 S Ci:6:006:0 s 80 06 0200 0000 003b 59 < ffff88007c166780 2279958069 C Ci:6:006:0 0 59 = 09023b00 020100e0 19090400 00010301 01000921 10010001 22410007 05810308 ffff88007c166780 2279958084 S Ci:6:006:0 s 80 06 0300 0000 00ff 255 < ffff88007c166780 2279963068 C Ci:6:006:0 0 4 = 04030904 ffff88007c166780 2279963078 S Ci:6:006:0 s 80 06 0302 0409 00ff 255 < ffff88007c166780 2279971067 C Ci:6:006:0 0 26 = 1a035500 53004200 20004b00 65007900 62006f00 61007200 6400 ffff88007c166780 2279971077 S Ci:6:006:0 s 80 06 0301 0409 00ff 255 < ffff88007c166780 2279978068 C Ci:6:006:0 0 16 = 10034100 42004200 48004f00 4d004500 ffff88007c166900 2279978148 S Co:6:006:0 s 00 09 0001 0000 0000 0 ffff88007c166900 2279981069 C Co:6:006:0 0 0 ffff88007c166540 2279981168 S Co:6:006:0 s 21 0a 0000 0000 0000 0 ffff88007c166540 2279983071 C Co:6:006:0 0 0 ffff88007c166540 2279983082 S Ci:6:006:0 s 81 06 2200 0000 0041 65 < ffff88007c166540 2279984071 C Ci:6:006:0 0 65 = 05010906 a1010507 19e029e7 15002501 95087501 81029508 75018101 05081901 ffff88007c166480 2279984276 S Co:6:006:0 s 21 09 0200 0000 0001 1 = 00 ffff88007c166480 2279985068 C Co:6:006:0 0 1 > ffff88007c166480 2279998046 S Co:6:006:0 s 21 09 0200 0000 0001 1 = 01 ffff88007c166300 2279998050 S Ii:6:006:1 -115:8 8 < ffff88007c166480 2279999070 C Co:6:006:0 0 1 > ffff88007c392300 2280014161 S Co:6:006:0 s 21 0a 0000 0001 0000 0 ffff88007c392300 2280016071 C Co:6:006:0 0 0 ffff88007c392300 2280016093 S Ci:6:006:0 s 81 06 2200 0001 0068 104 < ffff88007c392300 2280018070 C Ci:6:006:0 0 104 = 05010902 a1018504 0901a100 05091901 29031500 25019503 75018102 95017505 ffff8800793033c0 2280034032 S Ii:6:006:2 -115:8 5 < ffff880079303900 2280066178 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff880079303900 2280068076 C Ci:6:005:0 0 4 = 01030000 ffff880079303900 2280068106 S Co:6:005:0 s 23 03 0004 0002 0000 0 ffff880079303900 2280069070 C Co:6:005:0 0 0 ffff880079303900 2280082048 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff880079303900 2280083073 C Ci:6:005:0 0 4 = 03031000 ffff880079303900 2280137024 S Co:6:005:0 s 23 01 0014 0002 0000 0 ffff880079303900 2280138072 C Co:6:005:0 0 0 ffff880079303900 2280138086 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff880079303900 2280149072 C Ci:6:000:0 0 18 = 12010002 00000008 5e04f000 01010102 0001 ffff880079303900 2280149082 S Co:6:005:0 s 23 03 0004 0002 0000 0 ffff880079303900 2280150073 C Co:6:005:0 0 0 ffff880079303900 2280166033 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff880079303900 2280167073 C Ci:6:005:0 0 4 = 03031000 ffff88007bb8a540 2280194072 C Ii:6:005:1 0:128 1 = 04 ffff88007bb8a540 2280194076 S Ii:6:005:1 -115:128 1 < ffff880079303900 2280221018 S Co:6:005:0 s 23 01 0014 0002 0000 0 ffff880079303900 2280222074 C Co:6:005:0 0 0 ffff880079303900 2280222081 S Co:6:000:0 s 00 05 0007 0000 0000 0 ffff880079303900 2280225073 C Co:6:000:0 0 0 ffff88007b3d93c0 2280241023 S Ci:6:007:0 s 80 06 0100 0000 0012 18 < ffff88007b3d93c0 2280250074 C Ci:6:007:0 0 18 = 12010002 00000008 5e04f000 01010102 0001 ffff88007b3d93c0 2280250085 S Ci:6:007:0 s 80 06 0200 0000 0009 9 < ffff88007b3d93c0 2280257073 C Ci:6:007:0 0 9 = 09022200 010100a0 32 ffff88007b3d93c0 2280257081 S Ci:6:007:0 s 80 06 0200 0000 0022 34 < ffff88007b3d93c0 2280273074 C Ci:6:007:0 0 34 = 09022200 010100a0 32090400 00010301 02000921 11012101 223b0007 05810304 ffff88007b3d93c0 2280273087 S Ci:6:007:0 s 80 06 0300 0000 00ff 255 < ffff88007b3d93c0 2280278073 C Ci:6:007:0 0 4 = 04030904 ffff88007b3d93c0 2280278085 S Ci:6:007:0 s 80 06 0302 0409 00ff 255 < ffff88007b3d93c0 2280304075 C Ci:6:007:0 0 58 = 3a034d00 69006300 72006f00 73006f00 66007400 2000ae00 20004c00 61007300 ffff88007b3d93c0 2280304083 S Ci:6:007:0 s 80 06 0301 0409 00ff 255 < ffff88007b3d93c0 2280324074 C Ci:6:007:0 0 44 = 2c034d00 69006300 72006f00 73006f00 66007400 20004300 6f007200 70006f00 ffff88007b3d9180 2280324170 S Co:6:007:0 s 00 09 0001 0000 0000 0 ffff88007b3d9180 2280327076 C Co:6:007:0 0 0 ffff88007b3d90c0 2280327147 S Co:6:007:0 s 21 0a 0000 0000 0000 0 ffff88007b3d90c0 2280330077 C Co:6:007:0 0 0 ffff88007b3d90c0 2280331317 S Ci:6:007:0 s 81 06 2200 0000 003b 59 < ffff88007b3d90c0 2280356077 C Ci:6:007:0 0 59 = 05010902 a1010501 0902a102 0901a100 05091901 29059505 75011500 25018102 ffff88007b3d9780 2280385156 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff88007b3d9780 2280387081 C Ci:6:005:0 0 4 = 03030000 ffff88007c166300 2283374132 C Ii:6:006:1 0:8 8 = 00002c00 00000000 ffff88007c166300 2283374159 S Ii:6:006:1 -115:8 8 < ffff88007c166300 2283454131 C Ii:6:006:1 0:8 8 = 00000000 00000000 ffff88007c166300 2283454144 S Ii:6:006:1 -115:8 8 < ffff88007c166480 2300209632 S Co:6:006:0 s 21 09 0200 0000 0001 1 = 00 ffff88007c166f00 2300210450 S Co:6:007:0 s 00 03 0001 0000 0000 0 ffff88007c166480 2300211433 C Co:6:006:0 0 1 > ffff88007c166f00 2300213428 C Co:6:007:0 0 0 ffff88007c166f00 2300213438 S Co:6:005:0 s 23 03 0002 0002 0000 0 ffff88007c166f00 2300214430 C Co:6:005:0 0 0 ffff88007c166300 2300230430 C Ii:6:006:1 -2:8 0 ffff8800793033c0 2300231429 C Ii:6:006:2 -2:8 0 ffff8800790ae0c0 2300231438 S Co:6:006:0 s 00 03 0001 0000 0000 0 ffff8800790ae0c0 2300233429 C Co:6:006:0 0 0 ffff8800790ae0c0 2300233435 S Co:6:005:0 s 23 03 0002 0001 0000 0 ffff8800790ae0c0 2300234429 C Co:6:005:0 0 0 ffff88007bb8a540 2300250430 C Ii:6:005:1 -2:128 0 ffff8800790ae0c0 2300250437 S Co:6:005:0 s 00 03 0001 0000 0000 0 ffff8800790ae0c0 2300252430 C Co:6:005:0 0 0 ffff8800790ae0c0 2300252437 S Co:6:001:0 s 23 03 0002 0001 0000 0 ffff8800790ae0c0 2300252440 C Co:6:001:0 0 0 ffff88007c183d80 2300277126 C Ii:6:001:1 -2:128 0 ffff88007b1bbf00 2319121030 S Co:6:001:0 s 23 03 0008 0001 0000 0 ffff88007b1bbf00 2319121032 C Co:6:001:0 0 0 ffff88007b1bbf00 2319121033 S Co:6:001:0 s 23 03 0008 0002 0000 0 ffff88007b1bbf00 2319121034 C Co:6:001:0 0 0 ffff88007b1bbf00 2319225018 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319225027 C Ci:6:001:0 0 4 = 01010300 ffff88007b1bbf00 2319225030 S Co:6:001:0 s 23 01 0010 0001 0000 0 ffff88007b1bbf00 2319225035 C Co:6:001:0 0 0 ffff88007b1bbf00 2319225036 S Co:6:001:0 s 23 01 0011 0001 0000 0 ffff88007b1bbf00 2319225039 C Co:6:001:0 0 0 ffff88007b1bbf00 2319225041 S Ci:6:001:0 s a3 00 0000 0002 0004 4 < ffff88007b1bbf00 2319225048 C Ci:6:001:0 0 4 = 00010000 ffff88007c183d80 2319329017 S Ii:6:001:1 -115:128 2 < ffff88007b1bbf00 2319277058 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319277065 C Ci:6:001:0 0 4 = 01010000 ffff88007b1bbf00 2319277069 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007b1bbf00 2319277075 C Co:6:001:0 0 0 ffff88007b1bbf00 2319332572 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319332596 C Ci:6:001:0 0 4 = 03010000 ffff88007b1bbf00 2319388581 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007b1bbf00 2319388582 C Co:6:001:0 0 0 ffff88007b1bbf00 2319388585 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007b1bbf00 2319391596 C Ci:6:000:0 0 8 = 12011001 09000008 ffff88007b1bbf00 2319391605 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007b1bbf00 2319391609 C Co:6:001:0 0 0 ffff88007b1bbf00 2319444573 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319444596 C Ci:6:001:0 0 4 = 01010000 ffff88007b1bbf00 2319500574 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319500581 C Ci:6:001:0 0 4 = 03010000 ffff88007b1bbf00 2319556573 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007b1bbf00 2319556574 C Co:6:001:0 0 0 ffff88007b1bbf00 2319556575 S Co:6:000:0 s 00 05 0005 0000 0000 0 ffff88007b1bbf00 2319558598 C Co:6:000:0 0 0 ffff88007b1bbf00 2319576579 S Ci:6:005:0 s 80 06 0100 0000 0012 18 < ffff88007b1bbf00 2319581599 C Ci:6:005:0 0 18 = 12011001 09000008 b4045020 01000102 0001 ffff88007b1bbf00 2319581608 S Ci:6:005:0 s 80 06 0200 0000 0019 25 < ffff88007b1bbf00 2319588598 C Ci:6:005:0 0 25 = 09021900 010100e0 32090400 00010900 00000705 81030100 ff ffff88007b1bbf00 2319588607 S Co:6:005:0 s 00 09 0001 0000 0000 0 ffff88007b1bbf00 2319591598 C Co:6:005:0 0 0 ffff88007b1bbf00 2319591607 S Co:6:005:0 s 01 0b 0000 0000 0000 0 ffff88007b1bbf00 2319593598 C Co:6:005:0 -32 0 ffff88007b1bbf00 2319593607 S Co:6:005:0 s 02 01 0000 0081 0000 0 ffff88007b1bbf00 2319594598 C Co:6:005:0 0 0 ffff88007b1bbf00 2319594605 S Ci:6:005:0 s 80 00 0000 0000 0002 2 < ffff88007b1bbf00 2319595598 C Ci:6:005:0 0 2 = 0000 ffff88007b1bbf00 2319595607 S Co:6:005:0 s 23 03 0008 0001 0000 0 ffff88007b1bbf00 2319596598 C Co:6:005:0 0 0 ffff88007b1bbf00 2319596604 S Co:6:005:0 s 23 03 0008 0002 0000 0 ffff88007b1bbf00 2319597599 C Co:6:005:0 0 0 ffff88007b1bbf00 2319597604 S Co:6:005:0 s 23 03 0008 0003 0000 0 ffff88007b1bbf00 2319598598 C Co:6:005:0 0 0 ffff88007b1bbf00 2319700569 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319701600 C Ci:6:005:0 0 4 = 01010100 ffff88007b1bbf00 2319701608 S Co:6:005:0 s 23 01 0010 0001 0000 0 ffff88007b1bbf00 2319702601 C Co:6:005:0 0 0 ffff88007b1bbf00 2319702607 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff88007b1bbf00 2319703600 C Ci:6:005:0 0 4 = 01030100 ffff88007b1bbf00 2319703608 S Co:6:005:0 s 23 01 0010 0002 0000 0 ffff88007b1bbf00 2319704600 C Co:6:005:0 0 0 ffff88007b1bbf00 2319704606 S Ci:6:005:0 s a3 00 0000 0003 0004 4 < ffff88007b1bbf00 2319705600 C Ci:6:005:0 0 4 = 00010000 ffff88007bb8a540 2319808573 S Ii:6:005:1 -115:128 1 < ffff88007b1bbf00 2319808581 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319809602 C Ci:6:005:0 0 4 = 01010000 ffff88007b1bbf00 2319809611 S Co:6:005:0 s 23 03 0004 0001 0000 0 ffff88007b1bbf00 2319810602 C Co:6:005:0 0 0 ffff88007b1bbf00 2319824573 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319825602 C Ci:6:005:0 0 4 = 03011000 ffff88007bb8a540 2319834602 C Ii:6:005:1 0:128 1 = 02 ffff88007bb8a540 2319834603 S Ii:6:005:1 -115:128 1 < ffff88007b1bbf00 2319880571 S Co:6:005:0 s 23 01 0014 0001 0000 0 ffff88007b1bbf00 2319881603 C Co:6:005:0 0 0 ffff88007b1bbf00 2319881611 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007b1bbf00 2319885604 C Ci:6:000:0 0 8 = 12011001 00000008 ffff88007b1bbf00 2319885610 S Co:6:005:0 s 23 03 0004 0001 0000 0 ffff88007b1bbf00 2319886603 C Co:6:005:0 0 0 ffff88007b1bbf00 2320601617 C Ci:6:005:0 0 4 = 03030000 ffff88007c183d80 2376096580 C Ii:6:001:1 0:128 1 = 02 ffff88007c183d80 2376096588 S Ii:6:001:1 -115:128 2 < ffff88007b1bbf00 2376096635 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2376096643 C Ci:6:001:0 0 4 = 00010300 ffff88007b1bbf00 2376096645 S Co:6:001:0 s 23 01 0010 0001 0000 0 ffff88007b1bbf00 2376096648 C Co:6:001:0 0 0 ffff88007b1bbf00 2376096649 S Co:6:001:0 s 23 01 0011 0001 0000 0 ffff88007b1bbf00 2376096653 C Co:6:001:0 0 0 ffff88007bb8a540 2376155613 C Ii:6:005:1 -84:128 0 ffff88007b1bb840 2376196920 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376196927 C Ci:6:001:0 0 4 = 00010000 ffff88007b1bb840 2376228587 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376228595 C Ci:6:001:0 0 4 = 00010000 ffff88007b1bb840 2376260569 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376260575 C Ci:6:001:0 0 4 = 00010000 ffff88007b1bb840 2376292570 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376292575 C Ci:6:001:0 0 4 = 00010000 ffff88007b1bb840 2376324583 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376324588 C Ci:6:001:0 0 4 = 00010000 ffff88007c183d80 2378392584 C Ii:6:001:1 -2:128 0 ffff88007bb8a540 2380828583 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8a540 2380828593 C Ci:6:001:0 0 4 = 01010100 ffff88007bb8a540 2380828596 S Co:6:001:0 s 23 01 0010 0001 0000 0 ffff88007bb8a540 2380828599 C Co:6:001:0 0 0 ffff88007bb8a540 2380828601 S Ci:6:001:0 s a3 00 0000 0002 0004 4 < ffff88007bb8a540 2380828605 C Ci:6:001:0 0 4 = 00010000 ffff88007c183d80 2380932574 S Ii:6:001:1 -115:128 2 < ffff88007bb8a540 2380932583 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8a540 2380932588 C Ci:6:001:0 0 4 = 01010000 ffff88007bb8a540 2380932595 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007bb8a540 2380932599 C Co:6:001:0 0 0 ffff88007bb8a540 2380988570 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8a540 2380988593 C Ci:6:001:0 0 4 = 01010000 ffff88007bb8a540 2381044577 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8a540 2381044582 C Ci:6:001:0 0 4 = 03010000 ffff88007bb8a540 2381100574 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007bb8a540 2381100576 C Co:6:001:0 0 0 ffff88007bb8a540 2381100580 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007bb8a540 2381103597 C Ci:6:000:0 0 8 = 12011001 09000008 ffff88007bb8a540 2381103604 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007bb8a540 2381103609 C Co:6:001:0 0 0 ffff88007bb8ac00 2381156576 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8ac00 2381156598 C Ci:6:001:0 0 4 = 01010000 ffff88007bb8ac00 2381212575 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8ac00 2381212581 C Ci:6:001:0 0 4 = 03010000 ffff88007bb8ac00 2381268570 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007bb8ac00 2381268572 C Co:6:001:0 0 0 ffff88007bb8ac00 2381268574 S Co:6:000:0 s 00 05 0008 0000 0000 0 ffff88007bb8ac00 2381270600 C Co:6:000:0 0 0 ffff88007bb8ac00 2381288573 S Ci:6:008:0 s 80 06 0100 0000 0012 18 < ffff88007bb8ac00 2381293600 C Ci:6:008:0 0 18 = 12011001 09000008 b4045020 01000102 0001 ffff88007bb8ac00 2381293611 S Ci:6:008:0 s 80 06 0200 0000 0009 9 < ffff88007bb8ac00 2381298600 C Ci:6:008:0 0 9 = 09021900 010100e0 32 ffff88007bb8ac00 2381298605 S Ci:6:008:0 s 80 06 0200 0000 0019 25 < ffff88007bb8ac00 2381305599 C Ci:6:008:0 0 25 = 09021900 010100e0 32090400 00010900 00000705 81030100 ff ffff88007bb8ac00 2381305609 S Ci:6:008:0 s 80 06 0300 0000 00ff 255 < ffff88007bb8ac00 2381310598 C Ci:6:008:0 0 4 = 04030904 ffff88007bb8ac00 2381310607 S Ci:6:008:0 s 80 06 0302 0409 00ff 255 < ffff88007bb8ac00 2381322598 C Ci:6:008:0 0 62 = 3e034700 42006500 6c006c00 61002000 43006f00 72007000 6f007200 61007400 ffff88007bb8ac00 2381322607 S Ci:6:008:0 s 80 06 0301 0409 00ff 255 < ffff88007bb8ac00 2381331602 C Ci:6:008:0 0 36 = 24034200 65006c00 6c006100 20004300 6f007200 70006f00 72006100 74006900 ffff88007b3d9600 2381331693 S Co:6:008:0 s 00 09 0001 0000 0000 0 ffff88007b3d9600 2381334602 C Co:6:008:0 0 0 ffff88007b3d9b40 2381334657 S Ci:6:008:0 s a0 06 2900 0000 000f 15 < ffff88007b3d9b40 2381336602 C Ci:6:008:0 0 9 = 0929030d 00321902 ff ffff88007b3d9b40 2381338771 S Ci:6:008:0 s 80 00 0000 0000 0002 2 < ffff88007b3d9b40 2381339600 C Ci:6:008:0 0 2 = 0000 ffff88007b3d9b40 2381339623 S Ci:6:008:0 s a0 00 0000 0000 0004 4 < ffff88007b3d9b40 2381340600 C Ci:6:008:0 0 4 = 00000000 ffff88007b3d99c0 2381340900 S Co:6:008:0 s 23 03 0008 0001 0000 0 ffff88007b3d99c0 2381341600 C Co:6:008:0 0 0 ffff88007b3d99c0 2381341605 S Co:6:008:0 s 23 03 0008 0002 0000 0 ffff88007b3d99c0 2381342600 C Co:6:008:0 0 0 ffff88007b3d99c0 2381342606 S Co:6:008:0 s 23 03 0008 0003 0000 0 ffff88007b3d99c0 2381343600 C Co:6:008:0 0 0 ffff88007b3d9480 2381440572 S Ci:6:008:0 s a3 00 0000 0001 0004 4 < ffff88007b3d9480 2381441603 C Ci:6:008:0 0 4 = 01010100 ffff88007b3d9480 2381441622 S Co:6:008:0 s 23 01 0010 0001 0000 0 ffff88007b3d9480 2381442600 C Co:6:008:0 0 0 ffff88007b3d9480 2381442608 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff88007b3d9480 2381443602 C Ci:6:008:0 0 4 = 01030100 ffff88007b3d9480 2381443610 S Co:6:008:0 s 23 01 0010 0002 0000 0 ffff88007b3d9480 2381444601 C Co:6:008:0 0 0 ffff88007b3d9480 2381444770 S Ci:6:008:0 s a3 00 0000 0003 0004 4 < ffff88007b3d9480 2381445603 C Ci:6:008:0 0 4 = 00010000 ffff88007b3d9b40 2381544570 S Ii:6:008:1 -115:128 1 < ffff88007b3d9480 2381544582 S Ci:6:008:0 s a3 00 0000 0001 0004 4 < ffff88007b3d9480 2381545604 C Ci:6:008:0 0 4 = 01010000 ffff88007b3d9480 2381545617 S Co:6:008:0 s 23 03 0004 0001 0000 0 ffff88007b3d9480 2381546603 C Co:6:008:0 0 0 ffff88007b3d9480 2381560585 S Ci:6:008:0 s a3 00 0000 0001 0004 4 < ffff88007b3d9b40 2381560603 C Ii:6:008:1 0:128 1 = 02 ffff88007b3d9b40 2381560605 S Ii:6:008:1 -115:128 1 < ffff88007b3d9480 2381561604 C Ci:6:008:0 0 4 = 03011000 ffff88007b3d9480 2381616587 S Co:6:008:0 s 23 01 0014 0001 0000 0 ffff88007b3d9480 2381617604 C Co:6:008:0 0 0 ffff88007b3d9480 2381617616 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007b3d9480 2381621605 C Ci:6:000:0 0 8 = 12011001 00000008 ffff88007b3d9480 2381621613 S Co:6:008:0 s 23 03 0004 0001 0000 0 ffff88007b3d9480 2381622605 C Co:6:008:0 0 0 ffff88007b3d9480 2381636573 S Ci:6:008:0 s a3 00 0000 0001 0004 4 < ffff88007b3d9480 2381637606 C Ci:6:008:0 0 4 = 03011000 ffff88007b3d9b40 2381688606 C Ii:6:008:1 0:128 1 = 02 ffff88007b3d9b40 2381688610 S Ii:6:008:1 -115:128 1 < ffff88007b3d9480 2381692574 S Co:6:008:0 s 23 01 0014 0001 0000 0 ffff88007b3d9480 2381693606 C Co:6:008:0 0 0 ffff88007b3d9480 2381693613 S Co:6:000:0 s 00 05 0009 0000 0000 0 ffff88007b3d9480 2381696611 C Co:6:000:0 0 0 ffff88007b3d9480 2381712576 S Ci:6:009:0 s 80 06 0100 0000 0012 18 < ffff88007b3d9480 2381717607 C Ci:6:009:0 0 18 = 12011001 00000008 58044c00 01010102 0001 ffff88007b3d9480 2381717618 S Ci:6:009:0 s 80 06 0200 0000 0009 9 < ffff88007b3d9480 2381722606 C Ci:6:009:0 0 9 = 09023b00 020100e0 19 ffff88007b3d9480 2381722613 S Ci:6:009:0 s 80 06 0200 0000 003b 59 < ffff88007b3d9480 2381733607 C Ci:6:009:0 0 59 = 09023b00 020100e0 19090400 00010301 01000921 10010001 22410007 05810308 ffff88007b3d9480 2381733621 S Ci:6:009:0 s 80 06 0300 0000 00ff 255 < ffff88007b3d9480 2381738607 C Ci:6:009:0 0 4 = 04030904 ffff88007b3d9480 2381738617 S Ci:6:009:0 s 80 06 0302 0409 00ff 255 < ffff88007b3d9480 2381746608 C Ci:6:009:0 0 26 = 1a035500 53004200 20004b00 65007900 62006f00 61007200 6400 ffff88007b3d9480 2381746614 S Ci:6:009:0 s 80 06 0301 0409 00ff 255 < ffff88007b3d9480 2381753607 C Ci:6:009:0 0 16 = 10034100 42004200 48004f00 4d004500 ffff88007b3d9540 2381753691 S Co:6:009:0 s 00 09 0001 0000 0000 0 ffff88007b3d9540 2381756608 C Co:6:009:0 0 0 ffff88007b3d9000 2381756995 S Co:6:009:0 s 21 0a 0000 0000 0000 0 ffff88007b3d9000 2381758608 C Co:6:009:0 0 0 ffff88007b3d9000 2381758618 S Ci:6:009:0 s 81 06 2200 0000 0041 65 < ffff88007b3d9000 2381759608 C Ci:6:009:0 0 65 = 05010906 a1010507 19e029e7 15002501 95087501 81029508 75018101 05081901 ffff88007b3d9900 2381760973 S Co:6:009:0 s 21 09 0200 0000 0001 1 = 00 ffff88007b3d9900 2381761608 C Co:6:009:0 0 1 > ffff88007b3d9900 2381772601 S Co:6:009:0 s 21 09 0200 0000 0001 1 = 01 ffff88007b3d9180 2381772607 S Ii:6:009:1 -115:8 8 < ffff88007b3d9900 2381774608 C Co:6:009:0 0 1 > ffff88007c2d3780 2381788729 S Co:6:009:0 s 21 0a 0000 0001 0000 0 ffff88007c2d3780 2381790611 C Co:6:009:0 0 0 ffff88007c2d3780 2381790622 S Ci:6:009:0 s 81 06 2200 0001 0068 104 < ffff88007c2d3780 2381792608 C Ci:6:009:0 0 104 = 05010902 a1018504 0901a100 05091901 29031500 25019503 75018102 95017505 ffff88007c2d36c0 2381804605 S Ii:6:009:2 -115:8 5 < ffff88007c2d30c0 2381836715 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff88007c2d30c0 2381838613 C Ci:6:008:0 0 4 = 01030000 ffff88007c2d30c0 2381838628 S Co:6:008:0 s 23 03 0004 0002 0000 0 ffff88007c2d30c0 2381839610 C Co:6:008:0 0 0 ffff88007c2d30c0 2381852602 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff88007c2d30c0 2381854612 C Ci:6:008:0 0 4 = 03031000 ffff88007c2d30c0 2381908570 S Co:6:008:0 s 23 01 0014 0002 0000 0 ffff88007c2d30c0 2381909611 C Co:6:008:0 0 0 ffff88007c2d30c0 2381909624 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007c2d30c0 2381920609 C Ci:6:000:0 0 18 = 12010002 00000008 5e04f000 01010102 0001 ffff88007c2d30c0 2381920618 S Co:6:008:0 s 23 03 0004 0002 0000 0 ffff88007c2d30c0 2381922609 C Co:6:008:0 0 0 ffff88007c2d30c0 2381936573 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff88007c2d30c0 2381937611 C Ci:6:008:0 0 4 = 03031000 ffff88007b3d9b40 2381944610 C Ii:6:008:1 0:128 1 = 04 ffff88007b3d9b40 2381944613 S Ii:6:008:1 -115:128 1 < ffff88007c2d30c0 2381992576 S Co:6:008:0 s 23 01 0014 0002 0000 0 ffff88007c2d30c0 2381993612 C Co:6:008:0 0 0 ffff88007c2d30c0 2381993619 S Co:6:000:0 s 00 05 000a 0000 0000 0 ffff88007c2d30c0 2381996611 C Co:6:000:0 0 0 ffff88007c2d30c0 2382012574 S Ci:6:010:0 s 80 06 0100 0000 0012 18 < ffff88007c2d30c0 2382021612 C Ci:6:010:0 0 18 = 12010002 00000008 5e04f000 01010102 0001 ffff88007c2d30c0 2382021622 S Ci:6:010:0 s 80 06 0200 0000 0009 9 < ffff88007c2d30c0 2382028612 C Ci:6:010:0 0 9 = 09022200 010100a0 32 ffff88007c2d30c0 2382028619 S Ci:6:010:0 s 80 06 0200 0000 0022 34 < ffff88007c2d30c0 2382044613 C Ci:6:010:0 0 34 = 09022200 010100a0 32090400 00010301 02000921 11012101 223b0007 05810304 ffff88007c2d30c0 2382044625 S Ci:6:010:0 s 80 06 0300 0000 00ff 255 < ffff88007c2d30c0 2382049612 C Ci:6:010:0 0 4 = 04030904 ffff88007c2d30c0 2382049623 S Ci:6:010:0 s 80 06 0302 0409 00ff 255 < ffff88007c2d30c0 2382075612 C Ci:6:010:0 0 58 = 3a034d00 69006300 72006f00 73006f00 66007400 2000ae00 20004c00 61007300 ffff88007c2d30c0 2382075622 S Ci:6:010:0 s 80 06 0301 0409 00ff 255 < ffff88007c2d30c0 2382094613 C Ci:6:010:0 0 44 = 2c034d00 69006300 72006f00 73006f00 66007400 20004300 6f007200 70006f00 ffff88007abef3c0 2382094703 S Co:6:010:0 s 00 09 0001 0000 0000 0 ffff88007abef3c0 2382097616 C Co:6:010:0 0 0 ffff88007abef240 2382097703 S Co:6:010:0 s 21 0a 0000 0000 0000 0 ffff88007abef240 2382100613 C Co:6:010:0 0 0 ffff88007abef240 2382100654 S Ci:6:010:0 s 81 06 2200 0000 003b 59 < ffff88007abef240 2382125616 C Ci:6:010:0 0 59 = 05010902 a1010501 0902a102 0901a100 05091901 29059505 75011500 25018102 ffff8800790e20c0 2382156712 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff8800790e20c0 2382158618 C Ci:6:008:0 0 4 = 03030000 ffff88007b3d9180 2387020704 C Ii:6:009:1 0:8 8 = 00002c00 00000000 ffff88007b3d9180 2387020726 S Ii:6:009:1 -115:8 8 < ffff88007b3d9180 2387148704 C Ii:6:009:1 0:8 8 = 00000000 00000000 ffff88007b3d9180 2387148714 S Ii:6:009:1 -115:8 8 < XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub ehci_hcd 0000:00:1d.7: port 1 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC usb usb6: usb resume usb usb6: wakeup_rh hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: hub_resume uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00 hub 6-0:1.0: port 1: status 0101 change 0001 hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 6-0:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 6-1: new full speed USB device using uhci_hcd and address 5 usb 6-1: ep0 maxpacket = 8 usb 6-1: default language 0x0409 usb 6-1: New USB device found, idVendor=04b4, idProduct=2050 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: GBella Corporation DV Keyboard usb 6-1: Manufacturer: Bella Corporation usb 6-1: uevent usb 6-1: usb_probe_device usb 6-1: configuration #1 chosen from 1 choice usb 6-1: adding 6-1:1.0 (config #1, interface 0) usb 6-1:1.0: uevent hub 6-1:1.0: usb_probe_interface hub 6-1:1.0: usb_probe_interface - got id hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected hub 6-1:1.0: compound device; port removable status: FRR hub 6-1:1.0: individual port power switching hub 6-1:1.0: individual port over-current protection hub 6-1:1.0: power on to power good time: 100ms hub 6-1:1.0: hub controller current requirement: 25mA hub 6-1:1.0: 100mA bus power budget for each child hub 6-1:1.0: local power source is good hub 6-1:1.0: enabling power on all ports /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '005' hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 5 ep81-INT, period 128, phase 0, 12 us hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0000 hub 6-1:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 6-1.1: new full speed USB device using uhci_hcd and address 6 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: default language 0x0409 usb 6-1.1: New USB device found, idVendor=0458, idProduct=004c usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.1: Product: USB Keyboard usb 6-1.1: Manufacturer: ABBHOME usb 6-1.1: uevent usb 6-1.1: usb_probe_device usb 6-1.1: configuration #1 chosen from 1 choice usb 6-1.1: adding 6-1.1:1.0 (config #1, interface 0) usb 6-1.1:1.0: uevent usbhid 6-1.1:1.0: usb_probe_interface usbhid 6-1.1:1.0: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input13 uhci_hcd 0000:00:1d.0: reserve dev 6 ep81-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0004: input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input0 usb 6-1.1: adding 6-1.1:1.1 (config #1, interface 1) usb 6-1.1:1.1: uevent usbhid 6-1.1:1.1: usb_probe_interface usbhid 6-1.1:1.1: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input14 uhci_hcd 0000:00:1d.0: reserve dev 6 ep82-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0005: input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input1 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '006' hub 6-1:1.0: 425mA power budget left hub 6-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s usb 6-1.2: new low speed USB device using uhci_hcd and address 7 usb 6-1.2: skipped 1 descriptor after interface usb 6-1.2: default language 0x0409 usb 6-1.2: New USB device found, idVendor=045e, idProduct=00f0 usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.2: Product: Microsoft � Laser Mouse 6000 usb 6-1.2: Manufacturer: Microsoft Corporation usb 6-1.2: uevent usb 6-1.2: usb_probe_device usb 6-1.2: configuration #1 chosen from 1 choice usb 6-1.2: adding 6-1.2:1.0 (config #1, interface 0) usb 6-1.2:1.0: uevent usbhid 6-1.2:1.0: usb_probe_interface usbhid 6-1.2:1.0: usb_probe_interface - got id input: Microsoft Corporation Microsoft � Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input15 generic-usb 0003:045E:00F0.0006: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft � Laser Mouse 6000] on usb-0000:00:1d.0-1.2/input0 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '007' hub 6-1:1.0: 325mA power budget left hub 6-1:1.0: state 7 ports 3 chg 0000 evt 0004 hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) usb 6-1.2: usb suspend uhci_hcd 0000:00:1d.0: release dev 6 ep81-INT, period 8, phase 4, 17 us uhci_hcd 0000:00:1d.0: release dev 6 ep82-INT, period 8, phase 4, 17 us usb 6-1.1: usb suspend hub 6-1:1.0: hub_suspend uhci_hcd 0000:00:1d.0: release dev 5 ep81-INT, period 128, phase 0, 12 us usb 6-1: usb suspend hub 6-0:1.0: hub_suspend usb usb6: bus suspend usb usb6: suspend_rh sd 1:0:0:0: [sdb] Synchronizing SCSI cache sd 1:0:0:0: [sdb] Stopping disk sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:08: disabled serial 00:06: disabled ath5k 0000:04:00.0: PCI INT A disabled ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT A disabled ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: wakeup: 0 ehci_hcd 0000:00:1d.7: --> PCI D3 uhci_hcd 0000:00:1d.2: uhci_pci_suspend uhci_hcd 0000:00:1d.2: PCI INT D disabled uhci_hcd 0000:00:1d.2: wakeup: 0 uhci_hcd 0000:00:1d.2: --> PCI D0 legacy uhci_hcd 0000:00:1d.1: uhci_pci_suspend uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.1: wakeup: 0 uhci_hcd 0000:00:1d.1: --> PCI D0 legacy uhci_hcd 0000:00:1d.0: uhci_pci_suspend uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.0: wakeup: 0 uhci_hcd 0000:00:1d.0: --> PCI D0 legacy HDA Intel 0000:00:1b.0: PCI INT A disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: wakeup: 0 ehci_hcd 0000:00:1a.7: --> PCI D3 uhci_hcd 0000:00:1a.2: uhci_pci_suspend uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.2: wakeup: 0 uhci_hcd 0000:00:1a.2: --> PCI D0 legacy uhci_hcd 0000:00:1a.1: uhci_pci_suspend uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.1: wakeup: 0 uhci_hcd 0000:00:1a.1: --> PCI D0 legacy uhci_hcd 0000:00:1a.0: uhci_pci_suspend uhci_hcd 0000:00:1a.0: PCI INT A disabled uhci_hcd 0000:00:1a.0: wakeup: 0 uhci_hcd 0000:00:1a.0: --> PCI D0 legacy e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI e1000e 0000:00:19.0: PCI INT A disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Extended CMOS year: 2000 x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 Back to C! Extended CMOS year: 2000 pci 0000:00:02.0: restoring config space at offset 0x6 (was 0xc0000008, writing 0xd0000008) pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x105) pci 0000:00:03.1: restoring config space at offset 0xf (was 0x400, writing 0x40f) pci 0000:00:03.1: restoring config space at offset 0xb (was 0x0, writing 0x29c58086) pci 0000:00:03.1: restoring config space at offset 0x4 (was 0xfed11004, writing 0xffa7b804) pci 0000:00:03.1: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30c) pci 0000:00:03.2: restoring config space at offset 0x8 (was 0x1, writing 0xe081) pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0xe401) pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0xe481) pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0xe801) serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a) serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xffa7a000) e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10e) e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xdc01) e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xffa79000) e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xffa40000) e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504) pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x20300, writing 0x2030c) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) pci 0000:00:1f.6: restoring config space at offset 0xb (was 0x0, writing 0x29328086) pci 0000:02:00.0: restoring config space at offset 0x7 (was 0x2a001f1, writing 0x22a001f1) firewire_ohci 0000:03:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010c) firewire_ohci 0000:03:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xff5f8000) firewire_ohci 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff5ff800) firewire_ohci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) firewire_ohci 0000:03:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300016) ath5k 0000:04:00.0: restoring config space at offset 0xf (was 0x1c0a0100, writing 0x1c0a0103) ath5k 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff6f0000) ath5k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0xa808) ath5k 0000:04:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900016) Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5984.95 BogoMIPS (lpj=11969904) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7010600070106, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Switched to high resolution mode on CPU 1 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 26 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: uhci_pci_resume uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00 uhci_hcd 0000:00:1a.0: Performing full reset usb usb3: root hub lost power or was reset usb usb3: suspend_rh uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: uhci_pci_resume uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1a.1: Performing full reset usb usb4: root hub lost power or was reset usb usb4: suspend_rh uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: uhci_pci_resume uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1a.2: Performing full reset usb usb5: root hub lost power or was reset usb usb5: suspend_rh ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: uhci_pci_resume uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00 uhci_hcd 0000:00:1d.0: Performing full reset usb usb6: root hub lost power or was reset usb usb6: suspend_rh uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: uhci_pci_resume uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1d.1: Performing full reset usb usb7: root hub lost power or was reset usb usb7: suspend_rh uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: uhci_pci_resume uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1d.2: Performing full reset usb usb8: root hub lost power or was reset usb usb8: suspend_rh ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.6: PME# disabled pci 0000:02:00.0: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes ath5k 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 serial 00:06: activated parport_pc 00:08: activated sd 0:0:0:0: [sda] Starting disk ata3: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) firewire_core: rediscovered device fw0 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/133 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x00400040, connection status changed ata4.00: configured for UDMA/66 ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata4: irq_stat 0x00000040, connection status changed ata4.00: configured for UDMA/66 ata4: EH complete ata2.00: configured for UDMA/133 ata2: EH complete sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors: (164 GB/153 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] Starting disk usb usb1: usb resume ehci_hcd 0000:00:1a.7: resume root hub hub 1-0:1.0: hub_resume usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub hub 2-0:1.0: hub_resume usb usb6: usb resume usb usb6: wakeup_rh hub 6-0:1.0: hub_reset_resume hub 6-0:1.0: trying to enable port power on non-switchable hub uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 hub 6-0:1.0: port 1: status 0101 change 0003 usb 6-1: finish reset-resume usb 6-1: reset full speed USB device using uhci_hcd and address 5 hub 6-0:1.0: port 1 not reset yet, waiting 50ms usb 6-1: ep0 maxpacket = 8 usb 6-1: manual set_interface for iface 0, alt 0 hub 6-1:1.0: hub_reset_resume hub 6-1:1.0: enabling power on all ports hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 5 ep81-INT, period 128, phase 0, 12 us usb 6-1.1: finish reset-resume usb 6-1.1: reset full speed USB device using uhci_hcd and address 6 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: manual set_interface for iface 0, alt 0 usb 6-1.1: manual set_interface for iface 1, alt 0 usb 6-1.2: finish reset-resume usb 6-1.2: reset low speed USB device using uhci_hcd and address 7 usb 6-1.2: manual set_interface for iface 0, alt 0 Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 6-0:1.0: port 1, status 0103, change 0000, 12 Mb/s hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0004 hub 6-1:1.0: port 1, status 0103, change 0000, 12 Mb/s done. hub 6-1:1.0: port 2, status 0303, change 0000, 1.5 Mb/s hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1a.7: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00 hub 6-0:1.0: port 1, status 0100, change 0003, 12 Mb/s usb 6-1: USB disconnect, address 5 usb 6-1.1: USB disconnect, address 6 usb 6-1.1: unregistering device usb 6-1.1: usb_disable_device nuking all URBs usb 6-1.1: unregistering interface 6-1.1:1.0 usb 6-1.1:1.0: uevent usb 6-1.1: unregistering interface 6-1.1:1.1 usb 6-1: uhci_result_common: failed with status 440000 hub 6-1:1.0: transfer --> -84 uhci_hcd 0000:00:1d.0: release dev 5 ep81-INT, period 128, phase 0, 12 us usb 6-1.1:1.1: uevent usb 6-1.1: uevent usb 6-1.2: USB disconnect, address 7 usb 6-1.2: unregistering device usb 6-1.2: usb_disable_device nuking all URBs usb 6-1.2: unregistering interface 6-1.2:1.0 usb 6-1.2:1.0: uevent usb 6-1.2: uevent usb 6-1: unregistering device usb 6-1: usb_disable_device nuking all URBs usb 6-1: unregistering interface 6-1:1.0 usb 6-1:1.0: uevent usb 6-1: uevent hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 usb usb6: suspend_rh (auto-stop) hub 6-0:1.0: hub_suspend usb usb6: bus auto-suspend usb usb6: suspend_rh usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub ehci_hcd 0000:00:1d.7: port 1 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC usb usb6: usb resume usb usb6: wakeup_rh hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: hub_resume uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00 hub 6-0:1.0: port 1: status 0101 change 0001 hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 6-0:1.0: port 1, status 0101, change 0000, 12 Mb/s hub 6-0:1.0: port 1 not reset yet, waiting 50ms usb 6-1: new full speed USB device using uhci_hcd and address 8 hub 6-0:1.0: port 1 not reset yet, waiting 50ms usb 6-1: ep0 maxpacket = 8 usb 6-1: default language 0x0409 usb 6-1: New USB device found, idVendor=04b4, idProduct=2050 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: GBella Corporation DV Keyboard usb 6-1: Manufacturer: Bella Corporation usb 6-1: uevent usb 6-1: usb_probe_device usb 6-1: configuration #1 chosen from 1 choice usb 6-1: adding 6-1:1.0 (config #1, interface 0) usb 6-1:1.0: uevent hub 6-1:1.0: usb_probe_interface hub 6-1:1.0: usb_probe_interface - got id hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected hub 6-1:1.0: compound device; port removable status: FRR hub 6-1:1.0: individual port power switching hub 6-1:1.0: individual port over-current protection hub 6-1:1.0: power on to power good time: 100ms hub 6-1:1.0: hub controller current requirement: 25mA hub 6-1:1.0: 100mA bus power budget for each child hub 6-1:1.0: local power source is good hub 6-1:1.0: enabling power on all ports /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '008' hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 8 ep81-INT, period 128, phase 0, 12 us hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0000 hub 6-1:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 6-1.1: new full speed USB device using uhci_hcd and address 9 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: default language 0x0409 usb 6-1.1: New USB device found, idVendor=0458, idProduct=004c usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.1: Product: USB Keyboard usb 6-1.1: Manufacturer: ABBHOME usb 6-1.1: uevent usb 6-1.1: usb_probe_device usb 6-1.1: configuration #1 chosen from 1 choice usb 6-1.1: adding 6-1.1:1.0 (config #1, interface 0) usb 6-1.1:1.0: uevent usbhid 6-1.1:1.0: usb_probe_interface usbhid 6-1.1:1.0: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input16 uhci_hcd 0000:00:1d.0: reserve dev 9 ep81-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0007: input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input0 usb 6-1.1: adding 6-1.1:1.1 (config #1, interface 1) usb 6-1.1:1.1: uevent usbhid 6-1.1:1.1: usb_probe_interface usbhid 6-1.1:1.1: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input17 uhci_hcd 0000:00:1d.0: reserve dev 9 ep82-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0008: input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input1 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '009' hub 6-1:1.0: 425mA power budget left hub 6-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s usb 6-1.2: new low speed USB device using uhci_hcd and address 10 usb 6-1.2: skipped 1 descriptor after interface usb 6-1.2: default language 0x0409 usb 6-1.2: New USB device found, idVendor=045e, idProduct=00f0 usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.2: Product: Microsoft � Laser Mouse 6000 usb 6-1.2: Manufacturer: Microsoft Corporation usb 6-1.2: uevent usb 6-1.2: usb_probe_device usb 6-1.2: configuration #1 chosen from 1 choice usb 6-1.2: adding 6-1.2:1.0 (config #1, interface 0) usb 6-1.2:1.0: uevent usbhid 6-1.2:1.0: usb_probe_interface usbhid 6-1.2:1.0: usb_probe_interface - got id input: Microsoft Corporation Microsoft � Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input18 generic-usb 0003:045E:00F0.0009: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft � Laser Mouse 6000] on usb-0000:00:1d.0-1.2/input0 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '010' hub 6-1:1.0: 325mA power budget left hub 6-1:1.0: state 7 ports 3 chg 0000 evt 0004 hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-16 13:50 ` Jiri Slaby 0 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-16 13:50 UTC (permalink / raw) To: Alan Stern Cc: Kernel development list, mm-commits, Greg KH, USB list, linux-input, Oliver Neukum Alan Stern wrote: > So the problem must be lower down, such as in the usbhid driver. The > best way to track this is to use usbmon. Well, there is some traffic after resume, but nothing when pressing keys... > Stop the usbmon trace and post the resulting file along > with the dmesg log. ffff88007c166780 2279165031 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007c166780 2279165042 C Ci:6:001:0 0 4 = 01010100 ffff88007c166780 2279165045 S Co:6:001:0 s 23 01 0010 0001 0000 0 ffff88007c166780 2279165049 C Co:6:001:0 0 0 ffff88007c166780 2279165050 S Ci:6:001:0 s a3 00 0000 0002 0004 4 < ffff88007c166780 2279165055 C Ci:6:001:0 0 4 = 00010000 ffff88007c183d80 2279270034 S Ii:6:001:1 -115:128 2 < ffff88007c166780 2279270043 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007c166780 2279270047 C Ci:6:001:0 0 4 = 01010000 ffff88007c166780 2279270055 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007c166780 2279270059 C Co:6:001:0 0 0 ffff88007c166780 2279325063 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007c166780 2279325085 C Ci:6:001:0 0 4 = 03010000 ffff88007c166780 2279381027 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007c166780 2279381029 C Co:6:001:0 0 0 ffff88007c166780 2279381033 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007c166780 2279384059 C Ci:6:000:0 0 8 = 12011001 09000008 ffff88007c166780 2279384068 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007c166780 2279384072 C Co:6:001:0 0 0 ffff88007c166780 2279437062 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007c166780 2279437084 C Ci:6:001:0 0 4 = 03010000 ffff88007c166780 2279493037 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007c166780 2279493039 C Co:6:001:0 0 0 ffff88007c166780 2279493041 S Co:6:000:0 s 00 05 0005 0000 0000 0 ffff88007c166780 2279495060 C Co:6:000:0 0 0 ffff88007b1bb840 2279513027 S Ci:6:005:0 s 80 06 0100 0000 0012 18 < ffff88007b1bb840 2279518061 C Ci:6:005:0 0 18 = 12011001 09000008 b4045020 01000102 0001 ffff88007b1bb840 2279518071 S Ci:6:005:0 s 80 06 0200 0000 0009 9 < ffff88007b1bb840 2279523060 C Ci:6:005:0 0 9 = 09021900 010100e0 32 ffff88007b1bb840 2279523067 S Ci:6:005:0 s 80 06 0200 0000 0019 25 < ffff88007b1bb840 2279530061 C Ci:6:005:0 0 25 = 09021900 010100e0 32090400 00010900 00000705 81030100 ff ffff88007b1bb840 2279530072 S Ci:6:005:0 s 80 06 0300 0000 00ff 255 < ffff88007b1bb840 2279535060 C Ci:6:005:0 0 4 = 04030904 ffff88007b1bb840 2279535069 S Ci:6:005:0 s 80 06 0302 0409 00ff 255 < ffff88007b1bb840 2279547061 C Ci:6:005:0 0 62 = 3e034700 42006500 6c006c00 61002000 43006f00 72007000 6f007200 61007400 ffff88007b1bb840 2279547070 S Ci:6:005:0 s 80 06 0301 0409 00ff 255 < ffff88007b1bb840 2279556060 C Ci:6:005:0 0 36 = 24034200 65006c00 6c006100 20004300 6f007200 70006f00 72006100 74006900 ffff88007bb8ac00 2279556150 S Co:6:005:0 s 00 09 0001 0000 0000 0 ffff88007bb8ac00 2279559063 C Co:6:005:0 0 0 ffff88007bb8a540 2279559112 S Ci:6:005:0 s a0 06 2900 0000 000f 15 < ffff88007bb8a540 2279561063 C Ci:6:005:0 0 9 = 0929030d 00321902 ff ffff88007bb8a540 2279561094 S Ci:6:005:0 s 80 00 0000 0000 0002 2 < ffff88007bb8a540 2279562061 C Ci:6:005:0 0 2 = 0000 ffff88007bb8a540 2279562071 S Ci:6:005:0 s a0 00 0000 0000 0004 4 < ffff88007bb8a540 2279563061 C Ci:6:005:0 0 4 = 00000000 ffff88007b3d96c0 2279563067 S Co:6:005:0 s 23 03 0008 0001 0000 0 ffff88007b3d96c0 2279564062 C Co:6:005:0 0 0 ffff88007b3d96c0 2279564070 S Co:6:005:0 s 23 03 0008 0002 0000 0 ffff88007b3d96c0 2279565060 C Co:6:005:0 0 0 ffff88007b3d96c0 2279565429 S Co:6:005:0 s 23 03 0008 0003 0000 0 ffff88007b3d96c0 2279566062 C Co:6:005:0 0 0 ffff88007b3d93c0 2279665021 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b3d93c0 2279666063 C Ci:6:005:0 0 4 = 01010100 ffff88007b3d93c0 2279666073 S Co:6:005:0 s 23 01 0010 0001 0000 0 ffff88007b3d93c0 2279667063 C Co:6:005:0 0 0 ffff88007b3d93c0 2279667070 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff88007b3d93c0 2279668063 C Ci:6:005:0 0 4 = 01030100 ffff88007b3d93c0 2279668072 S Co:6:005:0 s 23 01 0010 0002 0000 0 ffff88007b3d93c0 2279669062 C Co:6:005:0 0 0 ffff88007b3d93c0 2279669189 S Ci:6:005:0 s a3 00 0000 0003 0004 4 < ffff88007b3d93c0 2279670063 C Ci:6:005:0 0 4 = 00010000 ffff88007bb8a540 2279769018 S Ii:6:005:1 -115:128 1 < ffff88007b3d93c0 2279769031 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b3d93c0 2279770065 C Ci:6:005:0 0 4 = 01010000 ffff88007b3d93c0 2279770078 S Co:6:005:0 s 23 03 0004 0001 0000 0 ffff88007b3d93c0 2279771065 C Co:6:005:0 0 0 ffff88007b3d93c0 2279785033 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b3d93c0 2279786065 C Ci:6:005:0 0 4 = 03011000 ffff88007bb8a540 2279810065 C Ii:6:005:1 0:128 1 = 02 ffff88007bb8a540 2279810068 S Ii:6:005:1 -115:128 1 < ffff88007b3d93c0 2279841028 S Co:6:005:0 s 23 01 0014 0001 0000 0 ffff88007b3d93c0 2279842066 C Co:6:005:0 0 0 ffff88007b3d93c0 2279842076 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007b3d93c0 2279846065 C Ci:6:000:0 0 8 = 12011001 00000008 ffff88007b3d93c0 2279846073 S Co:6:005:0 s 23 03 0004 0001 0000 0 ffff88007b3d93c0 2279847067 C Co:6:005:0 0 0 ffff88007b3d93c0 2279861022 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b3d93c0 2279862067 C Ci:6:005:0 0 4 = 03011000 ffff88007b3d93c0 2279917018 S Co:6:005:0 s 23 01 0014 0001 0000 0 ffff88007b3d93c0 2279918067 C Co:6:005:0 0 0 ffff88007b3d93c0 2279918073 S Co:6:000:0 s 00 05 0006 0000 0000 0 ffff88007b3d93c0 2279921067 C Co:6:000:0 0 0 ffff88007c166780 2279937036 S Ci:6:006:0 s 80 06 0100 0000 0012 18 < ffff88007c166780 2279942068 C Ci:6:006:0 0 18 = 12011001 00000008 58044c00 01010102 0001 ffff88007c166780 2279942078 S Ci:6:006:0 s 80 06 0200 0000 0009 9 < ffff88007c166780 2279947067 C Ci:6:006:0 0 9 = 09023b00 020100e0 19 ffff88007c166780 2279947075 S Ci:6:006:0 s 80 06 0200 0000 003b 59 < ffff88007c166780 2279958069 C Ci:6:006:0 0 59 = 09023b00 020100e0 19090400 00010301 01000921 10010001 22410007 05810308 ffff88007c166780 2279958084 S Ci:6:006:0 s 80 06 0300 0000 00ff 255 < ffff88007c166780 2279963068 C Ci:6:006:0 0 4 = 04030904 ffff88007c166780 2279963078 S Ci:6:006:0 s 80 06 0302 0409 00ff 255 < ffff88007c166780 2279971067 C Ci:6:006:0 0 26 = 1a035500 53004200 20004b00 65007900 62006f00 61007200 6400 ffff88007c166780 2279971077 S Ci:6:006:0 s 80 06 0301 0409 00ff 255 < ffff88007c166780 2279978068 C Ci:6:006:0 0 16 = 10034100 42004200 48004f00 4d004500 ffff88007c166900 2279978148 S Co:6:006:0 s 00 09 0001 0000 0000 0 ffff88007c166900 2279981069 C Co:6:006:0 0 0 ffff88007c166540 2279981168 S Co:6:006:0 s 21 0a 0000 0000 0000 0 ffff88007c166540 2279983071 C Co:6:006:0 0 0 ffff88007c166540 2279983082 S Ci:6:006:0 s 81 06 2200 0000 0041 65 < ffff88007c166540 2279984071 C Ci:6:006:0 0 65 = 05010906 a1010507 19e029e7 15002501 95087501 81029508 75018101 05081901 ffff88007c166480 2279984276 S Co:6:006:0 s 21 09 0200 0000 0001 1 = 00 ffff88007c166480 2279985068 C Co:6:006:0 0 1 > ffff88007c166480 2279998046 S Co:6:006:0 s 21 09 0200 0000 0001 1 = 01 ffff88007c166300 2279998050 S Ii:6:006:1 -115:8 8 < ffff88007c166480 2279999070 C Co:6:006:0 0 1 > ffff88007c392300 2280014161 S Co:6:006:0 s 21 0a 0000 0001 0000 0 ffff88007c392300 2280016071 C Co:6:006:0 0 0 ffff88007c392300 2280016093 S Ci:6:006:0 s 81 06 2200 0001 0068 104 < ffff88007c392300 2280018070 C Ci:6:006:0 0 104 = 05010902 a1018504 0901a100 05091901 29031500 25019503 75018102 95017505 ffff8800793033c0 2280034032 S Ii:6:006:2 -115:8 5 < ffff880079303900 2280066178 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff880079303900 2280068076 C Ci:6:005:0 0 4 = 01030000 ffff880079303900 2280068106 S Co:6:005:0 s 23 03 0004 0002 0000 0 ffff880079303900 2280069070 C Co:6:005:0 0 0 ffff880079303900 2280082048 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff880079303900 2280083073 C Ci:6:005:0 0 4 = 03031000 ffff880079303900 2280137024 S Co:6:005:0 s 23 01 0014 0002 0000 0 ffff880079303900 2280138072 C Co:6:005:0 0 0 ffff880079303900 2280138086 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff880079303900 2280149072 C Ci:6:000:0 0 18 = 12010002 00000008 5e04f000 01010102 0001 ffff880079303900 2280149082 S Co:6:005:0 s 23 03 0004 0002 0000 0 ffff880079303900 2280150073 C Co:6:005:0 0 0 ffff880079303900 2280166033 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff880079303900 2280167073 C Ci:6:005:0 0 4 = 03031000 ffff88007bb8a540 2280194072 C Ii:6:005:1 0:128 1 = 04 ffff88007bb8a540 2280194076 S Ii:6:005:1 -115:128 1 < ffff880079303900 2280221018 S Co:6:005:0 s 23 01 0014 0002 0000 0 ffff880079303900 2280222074 C Co:6:005:0 0 0 ffff880079303900 2280222081 S Co:6:000:0 s 00 05 0007 0000 0000 0 ffff880079303900 2280225073 C Co:6:000:0 0 0 ffff88007b3d93c0 2280241023 S Ci:6:007:0 s 80 06 0100 0000 0012 18 < ffff88007b3d93c0 2280250074 C Ci:6:007:0 0 18 = 12010002 00000008 5e04f000 01010102 0001 ffff88007b3d93c0 2280250085 S Ci:6:007:0 s 80 06 0200 0000 0009 9 < ffff88007b3d93c0 2280257073 C Ci:6:007:0 0 9 = 09022200 010100a0 32 ffff88007b3d93c0 2280257081 S Ci:6:007:0 s 80 06 0200 0000 0022 34 < ffff88007b3d93c0 2280273074 C Ci:6:007:0 0 34 = 09022200 010100a0 32090400 00010301 02000921 11012101 223b0007 05810304 ffff88007b3d93c0 2280273087 S Ci:6:007:0 s 80 06 0300 0000 00ff 255 < ffff88007b3d93c0 2280278073 C Ci:6:007:0 0 4 = 04030904 ffff88007b3d93c0 2280278085 S Ci:6:007:0 s 80 06 0302 0409 00ff 255 < ffff88007b3d93c0 2280304075 C Ci:6:007:0 0 58 = 3a034d00 69006300 72006f00 73006f00 66007400 2000ae00 20004c00 61007300 ffff88007b3d93c0 2280304083 S Ci:6:007:0 s 80 06 0301 0409 00ff 255 < ffff88007b3d93c0 2280324074 C Ci:6:007:0 0 44 = 2c034d00 69006300 72006f00 73006f00 66007400 20004300 6f007200 70006f00 ffff88007b3d9180 2280324170 S Co:6:007:0 s 00 09 0001 0000 0000 0 ffff88007b3d9180 2280327076 C Co:6:007:0 0 0 ffff88007b3d90c0 2280327147 S Co:6:007:0 s 21 0a 0000 0000 0000 0 ffff88007b3d90c0 2280330077 C Co:6:007:0 0 0 ffff88007b3d90c0 2280331317 S Ci:6:007:0 s 81 06 2200 0000 003b 59 < ffff88007b3d90c0 2280356077 C Ci:6:007:0 0 59 = 05010902 a1010501 0902a102 0901a100 05091901 29059505 75011500 25018102 ffff88007b3d9780 2280385156 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff88007b3d9780 2280387081 C Ci:6:005:0 0 4 = 03030000 ffff88007c166300 2283374132 C Ii:6:006:1 0:8 8 = 00002c00 00000000 ffff88007c166300 2283374159 S Ii:6:006:1 -115:8 8 < ffff88007c166300 2283454131 C Ii:6:006:1 0:8 8 = 00000000 00000000 ffff88007c166300 2283454144 S Ii:6:006:1 -115:8 8 < ffff88007c166480 2300209632 S Co:6:006:0 s 21 09 0200 0000 0001 1 = 00 ffff88007c166f00 2300210450 S Co:6:007:0 s 00 03 0001 0000 0000 0 ffff88007c166480 2300211433 C Co:6:006:0 0 1 > ffff88007c166f00 2300213428 C Co:6:007:0 0 0 ffff88007c166f00 2300213438 S Co:6:005:0 s 23 03 0002 0002 0000 0 ffff88007c166f00 2300214430 C Co:6:005:0 0 0 ffff88007c166300 2300230430 C Ii:6:006:1 -2:8 0 ffff8800793033c0 2300231429 C Ii:6:006:2 -2:8 0 ffff8800790ae0c0 2300231438 S Co:6:006:0 s 00 03 0001 0000 0000 0 ffff8800790ae0c0 2300233429 C Co:6:006:0 0 0 ffff8800790ae0c0 2300233435 S Co:6:005:0 s 23 03 0002 0001 0000 0 ffff8800790ae0c0 2300234429 C Co:6:005:0 0 0 ffff88007bb8a540 2300250430 C Ii:6:005:1 -2:128 0 ffff8800790ae0c0 2300250437 S Co:6:005:0 s 00 03 0001 0000 0000 0 ffff8800790ae0c0 2300252430 C Co:6:005:0 0 0 ffff8800790ae0c0 2300252437 S Co:6:001:0 s 23 03 0002 0001 0000 0 ffff8800790ae0c0 2300252440 C Co:6:001:0 0 0 ffff88007c183d80 2300277126 C Ii:6:001:1 -2:128 0 ffff88007b1bbf00 2319121030 S Co:6:001:0 s 23 03 0008 0001 0000 0 ffff88007b1bbf00 2319121032 C Co:6:001:0 0 0 ffff88007b1bbf00 2319121033 S Co:6:001:0 s 23 03 0008 0002 0000 0 ffff88007b1bbf00 2319121034 C Co:6:001:0 0 0 ffff88007b1bbf00 2319225018 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319225027 C Ci:6:001:0 0 4 = 01010300 ffff88007b1bbf00 2319225030 S Co:6:001:0 s 23 01 0010 0001 0000 0 ffff88007b1bbf00 2319225035 C Co:6:001:0 0 0 ffff88007b1bbf00 2319225036 S Co:6:001:0 s 23 01 0011 0001 0000 0 ffff88007b1bbf00 2319225039 C Co:6:001:0 0 0 ffff88007b1bbf00 2319225041 S Ci:6:001:0 s a3 00 0000 0002 0004 4 < ffff88007b1bbf00 2319225048 C Ci:6:001:0 0 4 = 00010000 ffff88007c183d80 2319329017 S Ii:6:001:1 -115:128 2 < ffff88007b1bbf00 2319277058 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319277065 C Ci:6:001:0 0 4 = 01010000 ffff88007b1bbf00 2319277069 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007b1bbf00 2319277075 C Co:6:001:0 0 0 ffff88007b1bbf00 2319332572 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319332596 C Ci:6:001:0 0 4 = 03010000 ffff88007b1bbf00 2319388581 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007b1bbf00 2319388582 C Co:6:001:0 0 0 ffff88007b1bbf00 2319388585 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007b1bbf00 2319391596 C Ci:6:000:0 0 8 = 12011001 09000008 ffff88007b1bbf00 2319391605 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007b1bbf00 2319391609 C Co:6:001:0 0 0 ffff88007b1bbf00 2319444573 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319444596 C Ci:6:001:0 0 4 = 01010000 ffff88007b1bbf00 2319500574 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319500581 C Ci:6:001:0 0 4 = 03010000 ffff88007b1bbf00 2319556573 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007b1bbf00 2319556574 C Co:6:001:0 0 0 ffff88007b1bbf00 2319556575 S Co:6:000:0 s 00 05 0005 0000 0000 0 ffff88007b1bbf00 2319558598 C Co:6:000:0 0 0 ffff88007b1bbf00 2319576579 S Ci:6:005:0 s 80 06 0100 0000 0012 18 < ffff88007b1bbf00 2319581599 C Ci:6:005:0 0 18 = 12011001 09000008 b4045020 01000102 0001 ffff88007b1bbf00 2319581608 S Ci:6:005:0 s 80 06 0200 0000 0019 25 < ffff88007b1bbf00 2319588598 C Ci:6:005:0 0 25 = 09021900 010100e0 32090400 00010900 00000705 81030100 ff ffff88007b1bbf00 2319588607 S Co:6:005:0 s 00 09 0001 0000 0000 0 ffff88007b1bbf00 2319591598 C Co:6:005:0 0 0 ffff88007b1bbf00 2319591607 S Co:6:005:0 s 01 0b 0000 0000 0000 0 ffff88007b1bbf00 2319593598 C Co:6:005:0 -32 0 ffff88007b1bbf00 2319593607 S Co:6:005:0 s 02 01 0000 0081 0000 0 ffff88007b1bbf00 2319594598 C Co:6:005:0 0 0 ffff88007b1bbf00 2319594605 S Ci:6:005:0 s 80 00 0000 0000 0002 2 < ffff88007b1bbf00 2319595598 C Ci:6:005:0 0 2 = 0000 ffff88007b1bbf00 2319595607 S Co:6:005:0 s 23 03 0008 0001 0000 0 ffff88007b1bbf00 2319596598 C Co:6:005:0 0 0 ffff88007b1bbf00 2319596604 S Co:6:005:0 s 23 03 0008 0002 0000 0 ffff88007b1bbf00 2319597599 C Co:6:005:0 0 0 ffff88007b1bbf00 2319597604 S Co:6:005:0 s 23 03 0008 0003 0000 0 ffff88007b1bbf00 2319598598 C Co:6:005:0 0 0 ffff88007b1bbf00 2319700569 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319701600 C Ci:6:005:0 0 4 = 01010100 ffff88007b1bbf00 2319701608 S Co:6:005:0 s 23 01 0010 0001 0000 0 ffff88007b1bbf00 2319702601 C Co:6:005:0 0 0 ffff88007b1bbf00 2319702607 S Ci:6:005:0 s a3 00 0000 0002 0004 4 < ffff88007b1bbf00 2319703600 C Ci:6:005:0 0 4 = 01030100 ffff88007b1bbf00 2319703608 S Co:6:005:0 s 23 01 0010 0002 0000 0 ffff88007b1bbf00 2319704600 C Co:6:005:0 0 0 ffff88007b1bbf00 2319704606 S Ci:6:005:0 s a3 00 0000 0003 0004 4 < ffff88007b1bbf00 2319705600 C Ci:6:005:0 0 4 = 00010000 ffff88007bb8a540 2319808573 S Ii:6:005:1 -115:128 1 < ffff88007b1bbf00 2319808581 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319809602 C Ci:6:005:0 0 4 = 01010000 ffff88007b1bbf00 2319809611 S Co:6:005:0 s 23 03 0004 0001 0000 0 ffff88007b1bbf00 2319810602 C Co:6:005:0 0 0 ffff88007b1bbf00 2319824573 S Ci:6:005:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2319825602 C Ci:6:005:0 0 4 = 03011000 ffff88007bb8a540 2319834602 C Ii:6:005:1 0:128 1 = 02 ffff88007bb8a540 2319834603 S Ii:6:005:1 -115:128 1 < ffff88007b1bbf00 2319880571 S Co:6:005:0 s 23 01 0014 0001 0000 0 ffff88007b1bbf00 2319881603 C Co:6:005:0 0 0 ffff88007b1bbf00 2319881611 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007b1bbf00 2319885604 C Ci:6:000:0 0 8 = 12011001 00000008 ffff88007b1bbf00 2319885610 S Co:6:005:0 s 23 03 0004 0001 0000 0 ffff88007b1bbf00 2319886603 C Co:6:005:0 0 0 ffff88007b1bbf00 2320601617 C Ci:6:005:0 0 4 = 03030000 ffff88007c183d80 2376096580 C Ii:6:001:1 0:128 1 = 02 ffff88007c183d80 2376096588 S Ii:6:001:1 -115:128 2 < ffff88007b1bbf00 2376096635 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bbf00 2376096643 C Ci:6:001:0 0 4 = 00010300 ffff88007b1bbf00 2376096645 S Co:6:001:0 s 23 01 0010 0001 0000 0 ffff88007b1bbf00 2376096648 C Co:6:001:0 0 0 ffff88007b1bbf00 2376096649 S Co:6:001:0 s 23 01 0011 0001 0000 0 ffff88007b1bbf00 2376096653 C Co:6:001:0 0 0 ffff88007bb8a540 2376155613 C Ii:6:005:1 -84:128 0 ffff88007b1bb840 2376196920 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376196927 C Ci:6:001:0 0 4 = 00010000 ffff88007b1bb840 2376228587 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376228595 C Ci:6:001:0 0 4 = 00010000 ffff88007b1bb840 2376260569 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376260575 C Ci:6:001:0 0 4 = 00010000 ffff88007b1bb840 2376292570 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376292575 C Ci:6:001:0 0 4 = 00010000 ffff88007b1bb840 2376324583 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007b1bb840 2376324588 C Ci:6:001:0 0 4 = 00010000 ffff88007c183d80 2378392584 C Ii:6:001:1 -2:128 0 ffff88007bb8a540 2380828583 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8a540 2380828593 C Ci:6:001:0 0 4 = 01010100 ffff88007bb8a540 2380828596 S Co:6:001:0 s 23 01 0010 0001 0000 0 ffff88007bb8a540 2380828599 C Co:6:001:0 0 0 ffff88007bb8a540 2380828601 S Ci:6:001:0 s a3 00 0000 0002 0004 4 < ffff88007bb8a540 2380828605 C Ci:6:001:0 0 4 = 00010000 ffff88007c183d80 2380932574 S Ii:6:001:1 -115:128 2 < ffff88007bb8a540 2380932583 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8a540 2380932588 C Ci:6:001:0 0 4 = 01010000 ffff88007bb8a540 2380932595 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007bb8a540 2380932599 C Co:6:001:0 0 0 ffff88007bb8a540 2380988570 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8a540 2380988593 C Ci:6:001:0 0 4 = 01010000 ffff88007bb8a540 2381044577 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8a540 2381044582 C Ci:6:001:0 0 4 = 03010000 ffff88007bb8a540 2381100574 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007bb8a540 2381100576 C Co:6:001:0 0 0 ffff88007bb8a540 2381100580 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007bb8a540 2381103597 C Ci:6:000:0 0 8 = 12011001 09000008 ffff88007bb8a540 2381103604 S Co:6:001:0 s 23 03 0004 0001 0000 0 ffff88007bb8a540 2381103609 C Co:6:001:0 0 0 ffff88007bb8ac00 2381156576 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8ac00 2381156598 C Ci:6:001:0 0 4 = 01010000 ffff88007bb8ac00 2381212575 S Ci:6:001:0 s a3 00 0000 0001 0004 4 < ffff88007bb8ac00 2381212581 C Ci:6:001:0 0 4 = 03010000 ffff88007bb8ac00 2381268570 S Co:6:001:0 s 23 01 0014 0001 0000 0 ffff88007bb8ac00 2381268572 C Co:6:001:0 0 0 ffff88007bb8ac00 2381268574 S Co:6:000:0 s 00 05 0008 0000 0000 0 ffff88007bb8ac00 2381270600 C Co:6:000:0 0 0 ffff88007bb8ac00 2381288573 S Ci:6:008:0 s 80 06 0100 0000 0012 18 < ffff88007bb8ac00 2381293600 C Ci:6:008:0 0 18 = 12011001 09000008 b4045020 01000102 0001 ffff88007bb8ac00 2381293611 S Ci:6:008:0 s 80 06 0200 0000 0009 9 < ffff88007bb8ac00 2381298600 C Ci:6:008:0 0 9 = 09021900 010100e0 32 ffff88007bb8ac00 2381298605 S Ci:6:008:0 s 80 06 0200 0000 0019 25 < ffff88007bb8ac00 2381305599 C Ci:6:008:0 0 25 = 09021900 010100e0 32090400 00010900 00000705 81030100 ff ffff88007bb8ac00 2381305609 S Ci:6:008:0 s 80 06 0300 0000 00ff 255 < ffff88007bb8ac00 2381310598 C Ci:6:008:0 0 4 = 04030904 ffff88007bb8ac00 2381310607 S Ci:6:008:0 s 80 06 0302 0409 00ff 255 < ffff88007bb8ac00 2381322598 C Ci:6:008:0 0 62 = 3e034700 42006500 6c006c00 61002000 43006f00 72007000 6f007200 61007400 ffff88007bb8ac00 2381322607 S Ci:6:008:0 s 80 06 0301 0409 00ff 255 < ffff88007bb8ac00 2381331602 C Ci:6:008:0 0 36 = 24034200 65006c00 6c006100 20004300 6f007200 70006f00 72006100 74006900 ffff88007b3d9600 2381331693 S Co:6:008:0 s 00 09 0001 0000 0000 0 ffff88007b3d9600 2381334602 C Co:6:008:0 0 0 ffff88007b3d9b40 2381334657 S Ci:6:008:0 s a0 06 2900 0000 000f 15 < ffff88007b3d9b40 2381336602 C Ci:6:008:0 0 9 = 0929030d 00321902 ff ffff88007b3d9b40 2381338771 S Ci:6:008:0 s 80 00 0000 0000 0002 2 < ffff88007b3d9b40 2381339600 C Ci:6:008:0 0 2 = 0000 ffff88007b3d9b40 2381339623 S Ci:6:008:0 s a0 00 0000 0000 0004 4 < ffff88007b3d9b40 2381340600 C Ci:6:008:0 0 4 = 00000000 ffff88007b3d99c0 2381340900 S Co:6:008:0 s 23 03 0008 0001 0000 0 ffff88007b3d99c0 2381341600 C Co:6:008:0 0 0 ffff88007b3d99c0 2381341605 S Co:6:008:0 s 23 03 0008 0002 0000 0 ffff88007b3d99c0 2381342600 C Co:6:008:0 0 0 ffff88007b3d99c0 2381342606 S Co:6:008:0 s 23 03 0008 0003 0000 0 ffff88007b3d99c0 2381343600 C Co:6:008:0 0 0 ffff88007b3d9480 2381440572 S Ci:6:008:0 s a3 00 0000 0001 0004 4 < ffff88007b3d9480 2381441603 C Ci:6:008:0 0 4 = 01010100 ffff88007b3d9480 2381441622 S Co:6:008:0 s 23 01 0010 0001 0000 0 ffff88007b3d9480 2381442600 C Co:6:008:0 0 0 ffff88007b3d9480 2381442608 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff88007b3d9480 2381443602 C Ci:6:008:0 0 4 = 01030100 ffff88007b3d9480 2381443610 S Co:6:008:0 s 23 01 0010 0002 0000 0 ffff88007b3d9480 2381444601 C Co:6:008:0 0 0 ffff88007b3d9480 2381444770 S Ci:6:008:0 s a3 00 0000 0003 0004 4 < ffff88007b3d9480 2381445603 C Ci:6:008:0 0 4 = 00010000 ffff88007b3d9b40 2381544570 S Ii:6:008:1 -115:128 1 < ffff88007b3d9480 2381544582 S Ci:6:008:0 s a3 00 0000 0001 0004 4 < ffff88007b3d9480 2381545604 C Ci:6:008:0 0 4 = 01010000 ffff88007b3d9480 2381545617 S Co:6:008:0 s 23 03 0004 0001 0000 0 ffff88007b3d9480 2381546603 C Co:6:008:0 0 0 ffff88007b3d9480 2381560585 S Ci:6:008:0 s a3 00 0000 0001 0004 4 < ffff88007b3d9b40 2381560603 C Ii:6:008:1 0:128 1 = 02 ffff88007b3d9b40 2381560605 S Ii:6:008:1 -115:128 1 < ffff88007b3d9480 2381561604 C Ci:6:008:0 0 4 = 03011000 ffff88007b3d9480 2381616587 S Co:6:008:0 s 23 01 0014 0001 0000 0 ffff88007b3d9480 2381617604 C Co:6:008:0 0 0 ffff88007b3d9480 2381617616 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007b3d9480 2381621605 C Ci:6:000:0 0 8 = 12011001 00000008 ffff88007b3d9480 2381621613 S Co:6:008:0 s 23 03 0004 0001 0000 0 ffff88007b3d9480 2381622605 C Co:6:008:0 0 0 ffff88007b3d9480 2381636573 S Ci:6:008:0 s a3 00 0000 0001 0004 4 < ffff88007b3d9480 2381637606 C Ci:6:008:0 0 4 = 03011000 ffff88007b3d9b40 2381688606 C Ii:6:008:1 0:128 1 = 02 ffff88007b3d9b40 2381688610 S Ii:6:008:1 -115:128 1 < ffff88007b3d9480 2381692574 S Co:6:008:0 s 23 01 0014 0001 0000 0 ffff88007b3d9480 2381693606 C Co:6:008:0 0 0 ffff88007b3d9480 2381693613 S Co:6:000:0 s 00 05 0009 0000 0000 0 ffff88007b3d9480 2381696611 C Co:6:000:0 0 0 ffff88007b3d9480 2381712576 S Ci:6:009:0 s 80 06 0100 0000 0012 18 < ffff88007b3d9480 2381717607 C Ci:6:009:0 0 18 = 12011001 00000008 58044c00 01010102 0001 ffff88007b3d9480 2381717618 S Ci:6:009:0 s 80 06 0200 0000 0009 9 < ffff88007b3d9480 2381722606 C Ci:6:009:0 0 9 = 09023b00 020100e0 19 ffff88007b3d9480 2381722613 S Ci:6:009:0 s 80 06 0200 0000 003b 59 < ffff88007b3d9480 2381733607 C Ci:6:009:0 0 59 = 09023b00 020100e0 19090400 00010301 01000921 10010001 22410007 05810308 ffff88007b3d9480 2381733621 S Ci:6:009:0 s 80 06 0300 0000 00ff 255 < ffff88007b3d9480 2381738607 C Ci:6:009:0 0 4 = 04030904 ffff88007b3d9480 2381738617 S Ci:6:009:0 s 80 06 0302 0409 00ff 255 < ffff88007b3d9480 2381746608 C Ci:6:009:0 0 26 = 1a035500 53004200 20004b00 65007900 62006f00 61007200 6400 ffff88007b3d9480 2381746614 S Ci:6:009:0 s 80 06 0301 0409 00ff 255 < ffff88007b3d9480 2381753607 C Ci:6:009:0 0 16 = 10034100 42004200 48004f00 4d004500 ffff88007b3d9540 2381753691 S Co:6:009:0 s 00 09 0001 0000 0000 0 ffff88007b3d9540 2381756608 C Co:6:009:0 0 0 ffff88007b3d9000 2381756995 S Co:6:009:0 s 21 0a 0000 0000 0000 0 ffff88007b3d9000 2381758608 C Co:6:009:0 0 0 ffff88007b3d9000 2381758618 S Ci:6:009:0 s 81 06 2200 0000 0041 65 < ffff88007b3d9000 2381759608 C Ci:6:009:0 0 65 = 05010906 a1010507 19e029e7 15002501 95087501 81029508 75018101 05081901 ffff88007b3d9900 2381760973 S Co:6:009:0 s 21 09 0200 0000 0001 1 = 00 ffff88007b3d9900 2381761608 C Co:6:009:0 0 1 > ffff88007b3d9900 2381772601 S Co:6:009:0 s 21 09 0200 0000 0001 1 = 01 ffff88007b3d9180 2381772607 S Ii:6:009:1 -115:8 8 < ffff88007b3d9900 2381774608 C Co:6:009:0 0 1 > ffff88007c2d3780 2381788729 S Co:6:009:0 s 21 0a 0000 0001 0000 0 ffff88007c2d3780 2381790611 C Co:6:009:0 0 0 ffff88007c2d3780 2381790622 S Ci:6:009:0 s 81 06 2200 0001 0068 104 < ffff88007c2d3780 2381792608 C Ci:6:009:0 0 104 = 05010902 a1018504 0901a100 05091901 29031500 25019503 75018102 95017505 ffff88007c2d36c0 2381804605 S Ii:6:009:2 -115:8 5 < ffff88007c2d30c0 2381836715 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff88007c2d30c0 2381838613 C Ci:6:008:0 0 4 = 01030000 ffff88007c2d30c0 2381838628 S Co:6:008:0 s 23 03 0004 0002 0000 0 ffff88007c2d30c0 2381839610 C Co:6:008:0 0 0 ffff88007c2d30c0 2381852602 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff88007c2d30c0 2381854612 C Ci:6:008:0 0 4 = 03031000 ffff88007c2d30c0 2381908570 S Co:6:008:0 s 23 01 0014 0002 0000 0 ffff88007c2d30c0 2381909611 C Co:6:008:0 0 0 ffff88007c2d30c0 2381909624 S Ci:6:000:0 s 80 06 0100 0000 0040 64 < ffff88007c2d30c0 2381920609 C Ci:6:000:0 0 18 = 12010002 00000008 5e04f000 01010102 0001 ffff88007c2d30c0 2381920618 S Co:6:008:0 s 23 03 0004 0002 0000 0 ffff88007c2d30c0 2381922609 C Co:6:008:0 0 0 ffff88007c2d30c0 2381936573 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff88007c2d30c0 2381937611 C Ci:6:008:0 0 4 = 03031000 ffff88007b3d9b40 2381944610 C Ii:6:008:1 0:128 1 = 04 ffff88007b3d9b40 2381944613 S Ii:6:008:1 -115:128 1 < ffff88007c2d30c0 2381992576 S Co:6:008:0 s 23 01 0014 0002 0000 0 ffff88007c2d30c0 2381993612 C Co:6:008:0 0 0 ffff88007c2d30c0 2381993619 S Co:6:000:0 s 00 05 000a 0000 0000 0 ffff88007c2d30c0 2381996611 C Co:6:000:0 0 0 ffff88007c2d30c0 2382012574 S Ci:6:010:0 s 80 06 0100 0000 0012 18 < ffff88007c2d30c0 2382021612 C Ci:6:010:0 0 18 = 12010002 00000008 5e04f000 01010102 0001 ffff88007c2d30c0 2382021622 S Ci:6:010:0 s 80 06 0200 0000 0009 9 < ffff88007c2d30c0 2382028612 C Ci:6:010:0 0 9 = 09022200 010100a0 32 ffff88007c2d30c0 2382028619 S Ci:6:010:0 s 80 06 0200 0000 0022 34 < ffff88007c2d30c0 2382044613 C Ci:6:010:0 0 34 = 09022200 010100a0 32090400 00010301 02000921 11012101 223b0007 05810304 ffff88007c2d30c0 2382044625 S Ci:6:010:0 s 80 06 0300 0000 00ff 255 < ffff88007c2d30c0 2382049612 C Ci:6:010:0 0 4 = 04030904 ffff88007c2d30c0 2382049623 S Ci:6:010:0 s 80 06 0302 0409 00ff 255 < ffff88007c2d30c0 2382075612 C Ci:6:010:0 0 58 = 3a034d00 69006300 72006f00 73006f00 66007400 2000ae00 20004c00 61007300 ffff88007c2d30c0 2382075622 S Ci:6:010:0 s 80 06 0301 0409 00ff 255 < ffff88007c2d30c0 2382094613 C Ci:6:010:0 0 44 = 2c034d00 69006300 72006f00 73006f00 66007400 20004300 6f007200 70006f00 ffff88007abef3c0 2382094703 S Co:6:010:0 s 00 09 0001 0000 0000 0 ffff88007abef3c0 2382097616 C Co:6:010:0 0 0 ffff88007abef240 2382097703 S Co:6:010:0 s 21 0a 0000 0000 0000 0 ffff88007abef240 2382100613 C Co:6:010:0 0 0 ffff88007abef240 2382100654 S Ci:6:010:0 s 81 06 2200 0000 003b 59 < ffff88007abef240 2382125616 C Ci:6:010:0 0 59 = 05010902 a1010501 0902a102 0901a100 05091901 29059505 75011500 25018102 ffff8800790e20c0 2382156712 S Ci:6:008:0 s a3 00 0000 0002 0004 4 < ffff8800790e20c0 2382158618 C Ci:6:008:0 0 4 = 03030000 ffff88007b3d9180 2387020704 C Ii:6:009:1 0:8 8 = 00002c00 00000000 ffff88007b3d9180 2387020726 S Ii:6:009:1 -115:8 8 < ffff88007b3d9180 2387148704 C Ii:6:009:1 0:8 8 = 00000000 00000000 ffff88007b3d9180 2387148714 S Ii:6:009:1 -115:8 8 < XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub ehci_hcd 0000:00:1d.7: port 1 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC usb usb6: usb resume usb usb6: wakeup_rh hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: hub_resume uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00 hub 6-0:1.0: port 1: status 0101 change 0001 hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 6-0:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 6-1: new full speed USB device using uhci_hcd and address 5 usb 6-1: ep0 maxpacket = 8 usb 6-1: default language 0x0409 usb 6-1: New USB device found, idVendor=04b4, idProduct=2050 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: GBella Corporation DV Keyboard usb 6-1: Manufacturer: Bella Corporation usb 6-1: uevent usb 6-1: usb_probe_device usb 6-1: configuration #1 chosen from 1 choice usb 6-1: adding 6-1:1.0 (config #1, interface 0) usb 6-1:1.0: uevent hub 6-1:1.0: usb_probe_interface hub 6-1:1.0: usb_probe_interface - got id hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected hub 6-1:1.0: compound device; port removable status: FRR hub 6-1:1.0: individual port power switching hub 6-1:1.0: individual port over-current protection hub 6-1:1.0: power on to power good time: 100ms hub 6-1:1.0: hub controller current requirement: 25mA hub 6-1:1.0: 100mA bus power budget for each child hub 6-1:1.0: local power source is good hub 6-1:1.0: enabling power on all ports /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '005' hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 5 ep81-INT, period 128, phase 0, 12 us hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0000 hub 6-1:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 6-1.1: new full speed USB device using uhci_hcd and address 6 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: default language 0x0409 usb 6-1.1: New USB device found, idVendor=0458, idProduct=004c usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.1: Product: USB Keyboard usb 6-1.1: Manufacturer: ABBHOME usb 6-1.1: uevent usb 6-1.1: usb_probe_device usb 6-1.1: configuration #1 chosen from 1 choice usb 6-1.1: adding 6-1.1:1.0 (config #1, interface 0) usb 6-1.1:1.0: uevent usbhid 6-1.1:1.0: usb_probe_interface usbhid 6-1.1:1.0: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input13 uhci_hcd 0000:00:1d.0: reserve dev 6 ep81-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0004: input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input0 usb 6-1.1: adding 6-1.1:1.1 (config #1, interface 1) usb 6-1.1:1.1: uevent usbhid 6-1.1:1.1: usb_probe_interface usbhid 6-1.1:1.1: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input14 uhci_hcd 0000:00:1d.0: reserve dev 6 ep82-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0005: input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input1 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '006' hub 6-1:1.0: 425mA power budget left hub 6-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s usb 6-1.2: new low speed USB device using uhci_hcd and address 7 usb 6-1.2: skipped 1 descriptor after interface usb 6-1.2: default language 0x0409 usb 6-1.2: New USB device found, idVendor=045e, idProduct=00f0 usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.2: Product: Microsoft � Laser Mouse 6000 usb 6-1.2: Manufacturer: Microsoft Corporation usb 6-1.2: uevent usb 6-1.2: usb_probe_device usb 6-1.2: configuration #1 chosen from 1 choice usb 6-1.2: adding 6-1.2:1.0 (config #1, interface 0) usb 6-1.2:1.0: uevent usbhid 6-1.2:1.0: usb_probe_interface usbhid 6-1.2:1.0: usb_probe_interface - got id input: Microsoft Corporation Microsoft � Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input15 generic-usb 0003:045E:00F0.0006: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft � Laser Mouse 6000] on usb-0000:00:1d.0-1.2/input0 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '007' hub 6-1:1.0: 325mA power budget left hub 6-1:1.0: state 7 ports 3 chg 0000 evt 0004 hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) usb 6-1.2: usb suspend uhci_hcd 0000:00:1d.0: release dev 6 ep81-INT, period 8, phase 4, 17 us uhci_hcd 0000:00:1d.0: release dev 6 ep82-INT, period 8, phase 4, 17 us usb 6-1.1: usb suspend hub 6-1:1.0: hub_suspend uhci_hcd 0000:00:1d.0: release dev 5 ep81-INT, period 128, phase 0, 12 us usb 6-1: usb suspend hub 6-0:1.0: hub_suspend usb usb6: bus suspend usb usb6: suspend_rh sd 1:0:0:0: [sdb] Synchronizing SCSI cache sd 1:0:0:0: [sdb] Stopping disk sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:08: disabled serial 00:06: disabled ath5k 0000:04:00.0: PCI INT A disabled ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT A disabled ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: wakeup: 0 ehci_hcd 0000:00:1d.7: --> PCI D3 uhci_hcd 0000:00:1d.2: uhci_pci_suspend uhci_hcd 0000:00:1d.2: PCI INT D disabled uhci_hcd 0000:00:1d.2: wakeup: 0 uhci_hcd 0000:00:1d.2: --> PCI D0 legacy uhci_hcd 0000:00:1d.1: uhci_pci_suspend uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.1: wakeup: 0 uhci_hcd 0000:00:1d.1: --> PCI D0 legacy uhci_hcd 0000:00:1d.0: uhci_pci_suspend uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.0: wakeup: 0 uhci_hcd 0000:00:1d.0: --> PCI D0 legacy HDA Intel 0000:00:1b.0: PCI INT A disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: wakeup: 0 ehci_hcd 0000:00:1a.7: --> PCI D3 uhci_hcd 0000:00:1a.2: uhci_pci_suspend uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.2: wakeup: 0 uhci_hcd 0000:00:1a.2: --> PCI D0 legacy uhci_hcd 0000:00:1a.1: uhci_pci_suspend uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.1: wakeup: 0 uhci_hcd 0000:00:1a.1: --> PCI D0 legacy uhci_hcd 0000:00:1a.0: uhci_pci_suspend uhci_hcd 0000:00:1a.0: PCI INT A disabled uhci_hcd 0000:00:1a.0: wakeup: 0 uhci_hcd 0000:00:1a.0: --> PCI D0 legacy e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI e1000e 0000:00:19.0: PCI INT A disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Extended CMOS year: 2000 x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 Back to C! Extended CMOS year: 2000 pci 0000:00:02.0: restoring config space at offset 0x6 (was 0xc0000008, writing 0xd0000008) pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x105) pci 0000:00:03.1: restoring config space at offset 0xf (was 0x400, writing 0x40f) pci 0000:00:03.1: restoring config space at offset 0xb (was 0x0, writing 0x29c58086) pci 0000:00:03.1: restoring config space at offset 0x4 (was 0xfed11004, writing 0xffa7b804) pci 0000:00:03.1: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30c) pci 0000:00:03.2: restoring config space at offset 0x8 (was 0x1, writing 0xe081) pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0xe401) pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0xe481) pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0xe801) serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a) serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xffa7a000) e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10e) e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xdc01) e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xffa79000) e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xffa40000) e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504) pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x20300, writing 0x2030c) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) pci 0000:00:1f.6: restoring config space at offset 0xb (was 0x0, writing 0x29328086) pci 0000:02:00.0: restoring config space at offset 0x7 (was 0x2a001f1, writing 0x22a001f1) firewire_ohci 0000:03:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010c) firewire_ohci 0000:03:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xff5f8000) firewire_ohci 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff5ff800) firewire_ohci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) firewire_ohci 0000:03:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300016) ath5k 0000:04:00.0: restoring config space at offset 0xf (was 0x1c0a0100, writing 0x1c0a0103) ath5k 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xff6f0000) ath5k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0xa808) ath5k 0000:04:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900016) Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5984.95 BogoMIPS (lpj=11969904) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7010600070106, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Switched to high resolution mode on CPU 1 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 26 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: uhci_pci_resume uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00 uhci_hcd 0000:00:1a.0: Performing full reset usb usb3: root hub lost power or was reset usb usb3: suspend_rh uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: uhci_pci_resume uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1a.1: Performing full reset usb usb4: root hub lost power or was reset usb usb4: suspend_rh uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: uhci_pci_resume uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1a.2: Performing full reset usb usb5: root hub lost power or was reset usb usb5: suspend_rh ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: uhci_pci_resume uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00 uhci_hcd 0000:00:1d.0: Performing full reset usb usb6: root hub lost power or was reset usb usb6: suspend_rh uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: uhci_pci_resume uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1d.1: Performing full reset usb usb7: root hub lost power or was reset usb usb7: suspend_rh uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: uhci_pci_resume uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1d.2: Performing full reset usb usb8: root hub lost power or was reset usb usb8: suspend_rh ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.6: PME# disabled pci 0000:02:00.0: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes ath5k 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 serial 00:06: activated parport_pc 00:08: activated sd 0:0:0:0: [sda] Starting disk ata3: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) firewire_core: rediscovered device fw0 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/133 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x00400040, connection status changed ata4.00: configured for UDMA/66 ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata4: irq_stat 0x00000040, connection status changed ata4.00: configured for UDMA/66 ata4: EH complete ata2.00: configured for UDMA/133 ata2: EH complete sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors: (164 GB/153 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] Starting disk usb usb1: usb resume ehci_hcd 0000:00:1a.7: resume root hub hub 1-0:1.0: hub_resume usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub hub 2-0:1.0: hub_resume usb usb6: usb resume usb usb6: wakeup_rh hub 6-0:1.0: hub_reset_resume hub 6-0:1.0: trying to enable port power on non-switchable hub uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 hub 6-0:1.0: port 1: status 0101 change 0003 usb 6-1: finish reset-resume usb 6-1: reset full speed USB device using uhci_hcd and address 5 hub 6-0:1.0: port 1 not reset yet, waiting 50ms usb 6-1: ep0 maxpacket = 8 usb 6-1: manual set_interface for iface 0, alt 0 hub 6-1:1.0: hub_reset_resume hub 6-1:1.0: enabling power on all ports hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 5 ep81-INT, period 128, phase 0, 12 us usb 6-1.1: finish reset-resume usb 6-1.1: reset full speed USB device using uhci_hcd and address 6 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: manual set_interface for iface 0, alt 0 usb 6-1.1: manual set_interface for iface 1, alt 0 usb 6-1.2: finish reset-resume usb 6-1.2: reset low speed USB device using uhci_hcd and address 7 usb 6-1.2: manual set_interface for iface 0, alt 0 Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 6-0:1.0: port 1, status 0103, change 0000, 12 Mb/s hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0004 hub 6-1:1.0: port 1, status 0103, change 0000, 12 Mb/s done. hub 6-1:1.0: port 2, status 0303, change 0000, 1.5 Mb/s hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1a.7: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00 hub 6-0:1.0: port 1, status 0100, change 0003, 12 Mb/s usb 6-1: USB disconnect, address 5 usb 6-1.1: USB disconnect, address 6 usb 6-1.1: unregistering device usb 6-1.1: usb_disable_device nuking all URBs usb 6-1.1: unregistering interface 6-1.1:1.0 usb 6-1.1:1.0: uevent usb 6-1.1: unregistering interface 6-1.1:1.1 usb 6-1: uhci_result_common: failed with status 440000 hub 6-1:1.0: transfer --> -84 uhci_hcd 0000:00:1d.0: release dev 5 ep81-INT, period 128, phase 0, 12 us usb 6-1.1:1.1: uevent usb 6-1.1: uevent usb 6-1.2: USB disconnect, address 7 usb 6-1.2: unregistering device usb 6-1.2: usb_disable_device nuking all URBs usb 6-1.2: unregistering interface 6-1.2:1.0 usb 6-1.2:1.0: uevent usb 6-1.2: uevent usb 6-1: unregistering device usb 6-1: usb_disable_device nuking all URBs usb 6-1: unregistering interface 6-1:1.0 usb 6-1:1.0: uevent usb 6-1: uevent hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 usb usb6: suspend_rh (auto-stop) hub 6-0:1.0: hub_suspend usb usb6: bus auto-suspend usb usb6: suspend_rh usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub ehci_hcd 0000:00:1d.7: port 1 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC usb usb6: usb resume usb usb6: wakeup_rh hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 6-0:1.0: hub_resume uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00 hub 6-0:1.0: port 1: status 0101 change 0001 hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 6-0:1.0: port 1, status 0101, change 0000, 12 Mb/s hub 6-0:1.0: port 1 not reset yet, waiting 50ms usb 6-1: new full speed USB device using uhci_hcd and address 8 hub 6-0:1.0: port 1 not reset yet, waiting 50ms usb 6-1: ep0 maxpacket = 8 usb 6-1: default language 0x0409 usb 6-1: New USB device found, idVendor=04b4, idProduct=2050 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: GBella Corporation DV Keyboard usb 6-1: Manufacturer: Bella Corporation usb 6-1: uevent usb 6-1: usb_probe_device usb 6-1: configuration #1 chosen from 1 choice usb 6-1: adding 6-1:1.0 (config #1, interface 0) usb 6-1:1.0: uevent hub 6-1:1.0: usb_probe_interface hub 6-1:1.0: usb_probe_interface - got id hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected hub 6-1:1.0: compound device; port removable status: FRR hub 6-1:1.0: individual port power switching hub 6-1:1.0: individual port over-current protection hub 6-1:1.0: power on to power good time: 100ms hub 6-1:1.0: hub controller current requirement: 25mA hub 6-1:1.0: 100mA bus power budget for each child hub 6-1:1.0: local power source is good hub 6-1:1.0: enabling power on all ports /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '008' hub 6-1:1.0: port 1: status 0101 change 0001 hub 6-1:1.0: port 2: status 0301 change 0001 uhci_hcd 0000:00:1d.0: reserve dev 8 ep81-INT, period 128, phase 0, 12 us hub 6-1:1.0: state 7 ports 3 chg 0006 evt 0000 hub 6-1:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 6-1.1: new full speed USB device using uhci_hcd and address 9 usb 6-1.1: ep0 maxpacket = 8 usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: skipped 1 descriptor after interface usb 6-1.1: default language 0x0409 usb 6-1.1: New USB device found, idVendor=0458, idProduct=004c usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.1: Product: USB Keyboard usb 6-1.1: Manufacturer: ABBHOME usb 6-1.1: uevent usb 6-1.1: usb_probe_device usb 6-1.1: configuration #1 chosen from 1 choice usb 6-1.1: adding 6-1.1:1.0 (config #1, interface 0) usb 6-1.1:1.0: uevent usbhid 6-1.1:1.0: usb_probe_interface usbhid 6-1.1:1.0: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input16 uhci_hcd 0000:00:1d.0: reserve dev 9 ep81-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0007: input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input0 usb 6-1.1: adding 6-1.1:1.1 (config #1, interface 1) usb 6-1.1:1.1: uevent usbhid 6-1.1:1.1: usb_probe_interface usbhid 6-1.1:1.1: usb_probe_interface - got id input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input17 uhci_hcd 0000:00:1d.0: reserve dev 9 ep82-INT, period 8, phase 4, 17 us generic-usb 0003:0458:004C.0008: input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:1d.0-1.1/input1 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '009' hub 6-1:1.0: 425mA power budget left hub 6-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s usb 6-1.2: new low speed USB device using uhci_hcd and address 10 usb 6-1.2: skipped 1 descriptor after interface usb 6-1.2: default language 0x0409 usb 6-1.2: New USB device found, idVendor=045e, idProduct=00f0 usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.2: Product: Microsoft � Laser Mouse 6000 usb 6-1.2: Manufacturer: Microsoft Corporation usb 6-1.2: uevent usb 6-1.2: usb_probe_device usb 6-1.2: configuration #1 chosen from 1 choice usb 6-1.2: adding 6-1.2:1.0 (config #1, interface 0) usb 6-1.2:1.0: uevent usbhid 6-1.2:1.0: usb_probe_interface usbhid 6-1.2:1.0: usb_probe_interface - got id input: Microsoft Corporation Microsoft � Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input18 generic-usb 0003:045E:00F0.0009: input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft � Laser Mouse 6000] on usb-0000:00:1d.0-1.2/input0 /home/l/latest/xxx/drivers/usb/core/inode.c: creating file '010' hub 6-1:1.0: 325mA power budget left hub 6-1:1.0: state 7 ports 3 chg 0000 evt 0004 hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-16 19:58 ` Alan Stern 0 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2009-02-16 19:58 UTC (permalink / raw) To: Jiri Slaby Cc: Kernel development list, mm-commits, Greg KH, USB list, linux-input, Oliver Neukum On Mon, 16 Feb 2009, Jiri Slaby wrote: > Alan Stern wrote: > > So the problem must be lower down, such as in the usbhid driver. The > > best way to track this is to use usbmon. > > Well, there is some traffic after resume, but nothing when pressing keys... Unforunately the most important part of the log was lost, probably because the usbmon buffer filled up. (It's the part between the 2320601617 and 2376096580 timestamps -- a 56-second gap.) You can try again after increasing the value of EVENT_MAX in drivers/usb/mon/mon_text.c. Alan Stern ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] @ 2009-02-16 19:58 ` Alan Stern 0 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2009-02-16 19:58 UTC (permalink / raw) To: Jiri Slaby Cc: Kernel development list, mm-commits-u79uwXL29TY76Z2rM5mHXA, Greg KH, USB list, linux-input-u79uwXL29TY76Z2rM5mHXA, Oliver Neukum On Mon, 16 Feb 2009, Jiri Slaby wrote: > Alan Stern wrote: > > So the problem must be lower down, such as in the usbhid driver. The > > best way to track this is to use usbmon. > > Well, there is some traffic after resume, but nothing when pressing keys... Unforunately the most important part of the log was lost, probably because the usbmon buffer filled up. (It's the part between the 2320601617 and 2376096580 timestamps -- a 56-second gap.) You can try again after increasing the value of EVENT_MAX in drivers/usb/mon/mon_text.c. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: dead USB devices after resume [mmotm 2009-02-10-16-35] 2009-02-13 10:40 ` Jiri Slaby (?) (?) @ 2009-02-13 18:19 ` Jiri Kosina -1 siblings, 0 replies; 44+ messages in thread From: Jiri Kosina @ 2009-02-13 18:19 UTC (permalink / raw) To: Jiri Slaby Cc: Alan Stern, linux-kernel, mm-commits, Greg KH, USB list, linux-input, Oliver Neukum On Fri, 13 Feb 2009, Jiri Slaby wrote: > Here comes the resume part (including unplug, replug). I suspect > auto-suspend? The log looks fine IMHO. The autosuspend shouldn't be the culprit, as it should definitely be turned off by default for mice and keyboards (could you please verify that it really is)? I any way, the autosuspend for HID has been implemented by Oliver and is currently sitting as 8390887fae ("HID: autosuspend support for USB HID") through which it gets to -next. Could you please verify that this patch really isn't the culprit? Thanks, -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 44+ messages in thread
* ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 0:36 mmotm 2009-02-10-16-35 uploaded akpm 2009-02-11 8:44 ` Jiri Slaby @ 2009-02-11 8:51 ` Jiri Slaby 2009-02-11 8:51 ` Jiri Slaby ` (3 subsequent siblings) 5 siblings, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 8:51 UTC (permalink / raw) To: linux-kernel; +Cc: linux-acpi, Linux-pm mailing list, mm-commits On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded Hi, I've found out, that S4 disappeared in this release, in comparison to mmotm based on 2.6.29-rc2: -ACPI: (supports S0 S1 S3 S4 S5) +ACPI: (supports S0 S1 S3 S5) Any ideas what could have caused this? Full dmesgs diff follows: --- good 2009-02-11 09:19:39.000000000 +0100 +++ wrong 2009-02-11 09:17:49.000000000 +0100 @@ -1,5 +1,5 @@ Initializing cgroup subsys cpuset -Linux version 2.6.29-rc2-mm1_64 (ku@bellona) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #534 SMP Mon Jan 19 10:44:28 CET 2009 +Linux version 2.6.29-rc4-mm1_64 (ku@bellona) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #569 SMP Wed Feb 11 09:11:57 CET 2009 Command line: root=/dev/md1 vga=1 ro reboot=a,w slub_debug debug resume=/dev/sdb6 2 KERNEL supported cpus: Intel GenuineIntel @@ -27,7 +27,7 @@ ACPI: RSDP 000F9990, 0024 (r2 ACPIAM) ACPI: XSDT 7D5B0100, 0064 (r1 A M I OEMXSDT 5000708 MSFT 97) ACPI: FACP 7D5B0290, 00F4 (r3 A M I OEMFACP 5000708 MSFT 97) -ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 128/64 [20081204] +ACPI Warning (tbfadt-0567): 32/64X length mismatch in Gpe0Block: 128/64 [20090123] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7D5B0490, 6643 (r1 SDBLI9 SDBLI944 44 INTL 20051117) ACPI: FACS 7D5BE000, 0040 @@ -42,7 +42,7 @@ (5 early reservations) ==> bootmem [0000000000 - 007d5b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] - #2 [0000200000 - 00008a79e4] TEXT DATA BSS ==> [0000200000 - 00008a79e4] + #2 [0000200000 - 000089769c] TEXT DATA BSS ==> [0000200000 - 000089769c] #3 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 @@ -57,8 +57,8 @@ 0: 0x00000100 -> 0x0007d5b0 On node 0 totalpages: 513355 DMA zone: 56 pages used for memmap - DMA zone: 1807 pages reserved - DMA zone: 2132 pages, LIFO batch:0 + DMA zone: 1791 pages reserved + DMA zone: 2148 pages, LIFO batch:0 DMA32 zone: 6964 pages used for memmap DMA32 zone: 502396 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 @@ -77,21 +77,17 @@ ACPI: HPET id: 0x8086a301 base: 0xfed00000 4 Processors exceeds NR_CPUS limit of 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs -PM: Registered nosave memory: 000000000009c000 - 000000000009d000 -PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 -PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 -PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7d600000:81790000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 -PERCPU: Allocating 49152 bytes of per cpu data -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504528 +PERCPU: Allocating 77824 bytes of per cpu data +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504544 Kernel command line: root=/dev/md1 vga=1 ro reboot=a,w slub_debug debug resume=/dev/sdb6 2 Initializing CPU#0 NR_IRQS:4352 nr_irqs:288 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT -Detected 2992.548 MHz processor. +Detected 2992.452 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) @@ -100,11 +96,10 @@ please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found -Memory: 1993388k/2053824k available (3914k kernel code, 404k absent, 59348k reserved, 1810k data, 336k init) -SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 +Memory: 1993452k/2053824k available (3910k kernel code, 404k absent, 59340k reserved, 1806k data, 360k init) hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer -Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.09 BogoMIPS (lpj=11970192) +Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.90 BogoMIPS (lpj=11969808) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns @@ -114,11 +109,11 @@ Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal LVT vector (0xfa) already installed -using mwait in idle threads. -ACPI: Core revision 20081204 +ACPI: Core revision 20090123 Setting APIC routing to flat alloc irq_desc for 20 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 @@ -126,9 +121,10 @@ CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 5984.98 BogoMIPS (lpj=11969960) +Calibrating delay using timer specific routine.. 5984.90 BogoMIPS (lpj=11969813) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) @@ -136,7 +132,7 @@ CPU1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs -Total of 2 processors activated (11970.07 BogoMIPS). +Total of 2 processors activated (11969.81 BogoMIPS). net_namespace: 968 bytes NET: Registered protocol family 16 ACPI: bus type pci registered @@ -147,7 +143,7 @@ ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled -ACPI: (supports S0 S1 S3 S4 S5) +ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources @@ -231,7 +227,7 @@ ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *12 14 15) -ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C7, should be BA [20081204] +ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C7, should be BA [20090123] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs @@ -349,18 +345,18 @@ 0000:00:03.3: ttyS1 at I/O 0xe000 (irq = 17) is a 16550A parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] -Switched to high resolution mode on CPU 1 -Switched to high resolution mode on CPU 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: module loaded -e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 +e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 26 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 e1000e 0000:00:19.0: irq 26 for MSI/MSI-X +Switched to high resolution mode on CPU 1 +Switched to high resolution mode on CPU 0 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:20:f5:f2:1d 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff @@ -527,28 +523,27 @@ device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu -Advanced Linux Sound Architecture Driver Version 1.0.18a. +Advanced Linux Sound Architecture Driver Version 1.0.19. alloc irq_desc for 22 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel at 0xffa74000 irq 22 Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input2 input: HDA Intel at 0xffa74000 irq 22 Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input3 -firewire_core: created device fw0: GUID 0000000000000000, S400 input: HDA Intel at 0xffa74000 irq 22 Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input4 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input5 +firewire_core: created device fw0: GUID 0000000000000000, S400 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input6 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input8 input: HDA Intel at 0xffa74000 irq 22 HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input9 -usb 6-1: new full speed USB device using uhci_hcd and address 2 ALSA device list: #0: HDA Intel at 0xffa74000 irq 22 TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 registered taskstats version 1 -rtc_cmos 00:03: setting system clock to 2009-02-11 08:18:36 UTC (1234340316) +rtc_cmos 00:03: setting system clock to 2009-02-11 08:14:37 UTC (1234340077) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. @@ -627,8 +622,9 @@ kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 9:1. -Freeing unused kernel memory: 336k freed -Write protecting the kernel read-only data: 5352k +Freeing unused kernel memory: 360k freed +Write protecting the kernel read-only data: 5344k +usb 6-1: new full speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected @@ -642,9 +638,7 @@ ath5k 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ath5k 0000:04:00.0: registered as 'phy0' input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input10 -wmaster0 (ath5k): not using net_device_ops yet phy0: Selected rate control algorithm 'minstrel' -wlan0 (ath5k): not using net_device_ops yet ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) wlan0 renamed to wlan1 udev: renamed network interface wlan0 to wlan1 ^ permalink raw reply [flat|nested] 44+ messages in thread
* ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 0:36 mmotm 2009-02-10-16-35 uploaded akpm 2009-02-11 8:44 ` Jiri Slaby 2009-02-11 8:51 ` ACPI: S4 disappeared " Jiri Slaby @ 2009-02-11 8:51 ` Jiri Slaby 2009-02-11 10:17 ` Jiri Slaby 2009-02-11 10:17 ` Jiri Slaby 2009-02-11 16:48 ` mmotm 2009-02-10-16-35 uploaded Randy Dunlap ` (2 subsequent siblings) 5 siblings, 2 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 8:51 UTC (permalink / raw) To: linux-kernel; +Cc: mm-commits, Len Brown, linux-acpi, Linux-pm mailing list On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded Hi, I've found out, that S4 disappeared in this release, in comparison to mmotm based on 2.6.29-rc2: -ACPI: (supports S0 S1 S3 S4 S5) +ACPI: (supports S0 S1 S3 S5) Any ideas what could have caused this? Full dmesgs diff follows: --- good 2009-02-11 09:19:39.000000000 +0100 +++ wrong 2009-02-11 09:17:49.000000000 +0100 @@ -1,5 +1,5 @@ Initializing cgroup subsys cpuset -Linux version 2.6.29-rc2-mm1_64 (ku@bellona) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #534 SMP Mon Jan 19 10:44:28 CET 2009 +Linux version 2.6.29-rc4-mm1_64 (ku@bellona) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #569 SMP Wed Feb 11 09:11:57 CET 2009 Command line: root=/dev/md1 vga=1 ro reboot=a,w slub_debug debug resume=/dev/sdb6 2 KERNEL supported cpus: Intel GenuineIntel @@ -27,7 +27,7 @@ ACPI: RSDP 000F9990, 0024 (r2 ACPIAM) ACPI: XSDT 7D5B0100, 0064 (r1 A M I OEMXSDT 5000708 MSFT 97) ACPI: FACP 7D5B0290, 00F4 (r3 A M I OEMFACP 5000708 MSFT 97) -ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 128/64 [20081204] +ACPI Warning (tbfadt-0567): 32/64X length mismatch in Gpe0Block: 128/64 [20090123] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7D5B0490, 6643 (r1 SDBLI9 SDBLI944 44 INTL 20051117) ACPI: FACS 7D5BE000, 0040 @@ -42,7 +42,7 @@ (5 early reservations) ==> bootmem [0000000000 - 007d5b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] - #2 [0000200000 - 00008a79e4] TEXT DATA BSS ==> [0000200000 - 00008a79e4] + #2 [0000200000 - 000089769c] TEXT DATA BSS ==> [0000200000 - 000089769c] #3 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 @@ -57,8 +57,8 @@ 0: 0x00000100 -> 0x0007d5b0 On node 0 totalpages: 513355 DMA zone: 56 pages used for memmap - DMA zone: 1807 pages reserved - DMA zone: 2132 pages, LIFO batch:0 + DMA zone: 1791 pages reserved + DMA zone: 2148 pages, LIFO batch:0 DMA32 zone: 6964 pages used for memmap DMA32 zone: 502396 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 @@ -77,21 +77,17 @@ ACPI: HPET id: 0x8086a301 base: 0xfed00000 4 Processors exceeds NR_CPUS limit of 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs -PM: Registered nosave memory: 000000000009c000 - 000000000009d000 -PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 -PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 -PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7d600000:81790000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 -PERCPU: Allocating 49152 bytes of per cpu data -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504528 +PERCPU: Allocating 77824 bytes of per cpu data +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504544 Kernel command line: root=/dev/md1 vga=1 ro reboot=a,w slub_debug debug resume=/dev/sdb6 2 Initializing CPU#0 NR_IRQS:4352 nr_irqs:288 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT -Detected 2992.548 MHz processor. +Detected 2992.452 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) @@ -100,11 +96,10 @@ please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found -Memory: 1993388k/2053824k available (3914k kernel code, 404k absent, 59348k reserved, 1810k data, 336k init) -SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 +Memory: 1993452k/2053824k available (3910k kernel code, 404k absent, 59340k reserved, 1806k data, 360k init) hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer -Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.09 BogoMIPS (lpj=11970192) +Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.90 BogoMIPS (lpj=11969808) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns @@ -114,11 +109,11 @@ Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal LVT vector (0xfa) already installed -using mwait in idle threads. -ACPI: Core revision 20081204 +ACPI: Core revision 20090123 Setting APIC routing to flat alloc irq_desc for 20 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 @@ -126,9 +121,10 @@ CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 5984.98 BogoMIPS (lpj=11969960) +Calibrating delay using timer specific routine.. 5984.90 BogoMIPS (lpj=11969813) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K +CPU: CPU feature monitor disabled due to lack of CPUID level 0x5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) @@ -136,7 +132,7 @@ CPU1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs -Total of 2 processors activated (11970.07 BogoMIPS). +Total of 2 processors activated (11969.81 BogoMIPS). net_namespace: 968 bytes NET: Registered protocol family 16 ACPI: bus type pci registered @@ -147,7 +143,7 @@ ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled -ACPI: (supports S0 S1 S3 S4 S5) +ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources @@ -231,7 +227,7 @@ ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *12 14 15) -ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C7, should be BA [20081204] +ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C7, should be BA [20090123] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs @@ -349,18 +345,18 @@ 0000:00:03.3: ttyS1 at I/O 0xe000 (irq = 17) is a 16550A parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] -Switched to high resolution mode on CPU 1 -Switched to high resolution mode on CPU 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: module loaded -e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 +e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 26 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 e1000e 0000:00:19.0: irq 26 for MSI/MSI-X +Switched to high resolution mode on CPU 1 +Switched to high resolution mode on CPU 0 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:20:f5:f2:1d 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff @@ -527,28 +523,27 @@ device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu -Advanced Linux Sound Architecture Driver Version 1.0.18a. +Advanced Linux Sound Architecture Driver Version 1.0.19. alloc irq_desc for 22 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel at 0xffa74000 irq 22 Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input2 input: HDA Intel at 0xffa74000 irq 22 Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input3 -firewire_core: created device fw0: GUID 0000000000000000, S400 input: HDA Intel at 0xffa74000 irq 22 Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input4 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input5 +firewire_core: created device fw0: GUID 0000000000000000, S400 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input6 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7 input: HDA Intel at 0xffa74000 irq 22 Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input8 input: HDA Intel at 0xffa74000 irq 22 HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input9 -usb 6-1: new full speed USB device using uhci_hcd and address 2 ALSA device list: #0: HDA Intel at 0xffa74000 irq 22 TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 registered taskstats version 1 -rtc_cmos 00:03: setting system clock to 2009-02-11 08:18:36 UTC (1234340316) +rtc_cmos 00:03: setting system clock to 2009-02-11 08:14:37 UTC (1234340077) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. @@ -627,8 +622,9 @@ kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 9:1. -Freeing unused kernel memory: 336k freed -Write protecting the kernel read-only data: 5352k +Freeing unused kernel memory: 360k freed +Write protecting the kernel read-only data: 5344k +usb 6-1: new full speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected @@ -642,9 +638,7 @@ ath5k 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ath5k 0000:04:00.0: registered as 'phy0' input: ABBHOME USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input10 -wmaster0 (ath5k): not using net_device_ops yet phy0: Selected rate control algorithm 'minstrel' -wlan0 (ath5k): not using net_device_ops yet ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) wlan0 renamed to wlan1 udev: renamed network interface wlan0 to wlan1 ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 8:51 ` Jiri Slaby @ 2009-02-11 10:17 ` Jiri Slaby 2009-02-11 15:43 ` Rafael J. Wysocki 2009-02-11 15:43 ` Rafael J. Wysocki 2009-02-11 10:17 ` Jiri Slaby 1 sibling, 2 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 10:17 UTC (permalink / raw) To: Jiri Slaby Cc: linux-kernel, mm-commits, Len Brown, linux-acpi, Linux-pm mailing list, Rafael J. Wysocki, Pavel Machek On 02/11/2009 09:51 AM, Jiri Slaby wrote: > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: >> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > Hi, > > I've found out, that S4 disappeared in this release, in comparison to mmotm > based on 2.6.29-rc2: > -ACPI: (supports S0 S1 S3 S4 S5) > +ACPI: (supports S0 S1 S3 S5) > > Any ideas what could have caused this? I think this one ARCH_HIBERNATION_POSSIBLE=n because SMP=y since config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on !SMP || !X86_VOYAGER + depends on !SMP The condition was wrong, ok, anyway it worked. Would depends on !SMP || EXPERIMENTAL make sense? The smp is handled in disable_nonboot_cpus manner, right? ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 10:17 ` Jiri Slaby @ 2009-02-11 15:43 ` Rafael J. Wysocki 2009-02-11 15:43 ` Rafael J. Wysocki 1 sibling, 0 replies; 44+ messages in thread From: Rafael J. Wysocki @ 2009-02-11 15:43 UTC (permalink / raw) To: Jiri Slaby Cc: mm-commits, linux-kernel, linux-acpi, Pavel Machek, Linux-pm mailing list, Ingo Molnar On Wednesday 11 February 2009, Jiri Slaby wrote: > On 02/11/2009 09:51 AM, Jiri Slaby wrote: > > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > >> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > > > Hi, > > > > I've found out, that S4 disappeared in this release, in comparison to mmotm > > based on 2.6.29-rc2: > > -ACPI: (supports S0 S1 S3 S4 S5) > > +ACPI: (supports S0 S1 S3 S5) > > > > Any ideas what could have caused this? > > I think this one > ARCH_HIBERNATION_POSSIBLE=n > because > SMP=y > since > config ARCH_HIBERNATION_POSSIBLE > def_bool y > - depends on !SMP || !X86_VOYAGER > + depends on !SMP > > The condition was wrong, ok, anyway it worked. Would > depends on !SMP || EXPERIMENTAL > make sense? The smp is handled in disable_nonboot_cpus manner, right? Ah, someone removed X86_VOYAGER and left this gem. I guess that went in through -tip (Ingo CCed). After removing X86_VOYAGER, ARCH_HIBERNATION_POSSIBLE should always be set on x86. Just make it config ARCH_HIBERNATION_POSSIBLE def_bool y Thanks, Rafael ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 10:17 ` Jiri Slaby 2009-02-11 15:43 ` Rafael J. Wysocki @ 2009-02-11 15:43 ` Rafael J. Wysocki 2009-02-11 16:22 ` Ingo Molnar 2009-02-11 16:22 ` Ingo Molnar 1 sibling, 2 replies; 44+ messages in thread From: Rafael J. Wysocki @ 2009-02-11 15:43 UTC (permalink / raw) To: Jiri Slaby Cc: linux-kernel, mm-commits, Len Brown, linux-acpi, Linux-pm mailing list, Pavel Machek, Ingo Molnar On Wednesday 11 February 2009, Jiri Slaby wrote: > On 02/11/2009 09:51 AM, Jiri Slaby wrote: > > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > >> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > > > Hi, > > > > I've found out, that S4 disappeared in this release, in comparison to mmotm > > based on 2.6.29-rc2: > > -ACPI: (supports S0 S1 S3 S4 S5) > > +ACPI: (supports S0 S1 S3 S5) > > > > Any ideas what could have caused this? > > I think this one > ARCH_HIBERNATION_POSSIBLE=n > because > SMP=y > since > config ARCH_HIBERNATION_POSSIBLE > def_bool y > - depends on !SMP || !X86_VOYAGER > + depends on !SMP > > The condition was wrong, ok, anyway it worked. Would > depends on !SMP || EXPERIMENTAL > make sense? The smp is handled in disable_nonboot_cpus manner, right? Ah, someone removed X86_VOYAGER and left this gem. I guess that went in through -tip (Ingo CCed). After removing X86_VOYAGER, ARCH_HIBERNATION_POSSIBLE should always be set on x86. Just make it config ARCH_HIBERNATION_POSSIBLE def_bool y Thanks, Rafael ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 15:43 ` Rafael J. Wysocki @ 2009-02-11 16:22 ` Ingo Molnar 2009-02-11 16:22 ` Ingo Molnar 1 sibling, 0 replies; 44+ messages in thread From: Ingo Molnar @ 2009-02-11 16:22 UTC (permalink / raw) To: Rafael J. Wysocki Cc: mm-commits, Jiri Slaby, linux-kernel, linux-acpi, Pavel Machek, Linux-pm mailing list * Rafael J. Wysocki <rjw@sisk.pl> wrote: > On Wednesday 11 February 2009, Jiri Slaby wrote: > > On 02/11/2009 09:51 AM, Jiri Slaby wrote: > > > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > > >> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > > > > > Hi, > > > > > > I've found out, that S4 disappeared in this release, in comparison to mmotm > > > based on 2.6.29-rc2: > > > -ACPI: (supports S0 S1 S3 S4 S5) > > > +ACPI: (supports S0 S1 S3 S5) > > > > > > Any ideas what could have caused this? > > > > I think this one > > ARCH_HIBERNATION_POSSIBLE=n > > because > > SMP=y > > since > > config ARCH_HIBERNATION_POSSIBLE > > def_bool y > > - depends on !SMP || !X86_VOYAGER > > + depends on !SMP > > > > The condition was wrong, ok, anyway it worked. Would > > depends on !SMP || EXPERIMENTAL > > make sense? The smp is handled in disable_nonboot_cpus manner, right? > > Ah, someone removed X86_VOYAGER and left this gem. I guess that went in > through -tip (Ingo CCed). > > After removing X86_VOYAGER, ARCH_HIBERNATION_POSSIBLE should always be set > on x86. Just make it > > config ARCH_HIBERNATION_POSSIBLE > def_bool y heh, indeed :-) Fixed via the commit below. Thanks, Ingo ----------------> >From 17993b49b1f540aace8e9b4242530d0b3376eb2a Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Wed, 11 Feb 2009 17:20:51 +0100 Subject: [PATCH] x86: make hibernation always-possible This commit: aced3ce: x86/Voyager: remove HIBERNATION Kconfig quirk Made hibernation only available on UP - instead of making it available on all of x86. Fix it. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/Kconfig | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4a27aa4..148c112 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -140,7 +140,6 @@ config HAVE_CPUMASK_OF_CPU_MAP config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on !SMP config ARCH_SUSPEND_POSSIBLE def_bool y ^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 15:43 ` Rafael J. Wysocki 2009-02-11 16:22 ` Ingo Molnar @ 2009-02-11 16:22 ` Ingo Molnar 2009-02-11 21:22 ` Rafael J. Wysocki ` (3 more replies) 1 sibling, 4 replies; 44+ messages in thread From: Ingo Molnar @ 2009-02-11 16:22 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Jiri Slaby, linux-kernel, mm-commits, Len Brown, linux-acpi, Linux-pm mailing list, Pavel Machek * Rafael J. Wysocki <rjw@sisk.pl> wrote: > On Wednesday 11 February 2009, Jiri Slaby wrote: > > On 02/11/2009 09:51 AM, Jiri Slaby wrote: > > > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > > >> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > > > > > Hi, > > > > > > I've found out, that S4 disappeared in this release, in comparison to mmotm > > > based on 2.6.29-rc2: > > > -ACPI: (supports S0 S1 S3 S4 S5) > > > +ACPI: (supports S0 S1 S3 S5) > > > > > > Any ideas what could have caused this? > > > > I think this one > > ARCH_HIBERNATION_POSSIBLE=n > > because > > SMP=y > > since > > config ARCH_HIBERNATION_POSSIBLE > > def_bool y > > - depends on !SMP || !X86_VOYAGER > > + depends on !SMP > > > > The condition was wrong, ok, anyway it worked. Would > > depends on !SMP || EXPERIMENTAL > > make sense? The smp is handled in disable_nonboot_cpus manner, right? > > Ah, someone removed X86_VOYAGER and left this gem. I guess that went in > through -tip (Ingo CCed). > > After removing X86_VOYAGER, ARCH_HIBERNATION_POSSIBLE should always be set > on x86. Just make it > > config ARCH_HIBERNATION_POSSIBLE > def_bool y heh, indeed :-) Fixed via the commit below. Thanks, Ingo ----------------> >From 17993b49b1f540aace8e9b4242530d0b3376eb2a Mon Sep 17 00:00:00 2001 From: Ingo Molnar <mingo@elte.hu> Date: Wed, 11 Feb 2009 17:20:51 +0100 Subject: [PATCH] x86: make hibernation always-possible This commit: aced3ce: x86/Voyager: remove HIBERNATION Kconfig quirk Made hibernation only available on UP - instead of making it available on all of x86. Fix it. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/Kconfig | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4a27aa4..148c112 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -140,7 +140,6 @@ config HAVE_CPUMASK_OF_CPU_MAP config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on !SMP config ARCH_SUSPEND_POSSIBLE def_bool y ^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 16:22 ` Ingo Molnar @ 2009-02-11 21:22 ` Rafael J. Wysocki 2009-02-11 21:22 ` Rafael J. Wysocki ` (2 subsequent siblings) 3 siblings, 0 replies; 44+ messages in thread From: Rafael J. Wysocki @ 2009-02-11 21:22 UTC (permalink / raw) To: Ingo Molnar Cc: Jiri Slaby, linux-kernel, mm-commits, Len Brown, linux-acpi, Linux-pm mailing list, Pavel Machek On Wednesday 11 February 2009, Ingo Molnar wrote: > > * Rafael J. Wysocki <rjw@sisk.pl> wrote: > > > On Wednesday 11 February 2009, Jiri Slaby wrote: > > > On 02/11/2009 09:51 AM, Jiri Slaby wrote: > > > > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > > > >> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > > > > > > > Hi, > > > > > > > > I've found out, that S4 disappeared in this release, in comparison to mmotm > > > > based on 2.6.29-rc2: > > > > -ACPI: (supports S0 S1 S3 S4 S5) > > > > +ACPI: (supports S0 S1 S3 S5) > > > > > > > > Any ideas what could have caused this? > > > > > > I think this one > > > ARCH_HIBERNATION_POSSIBLE=n > > > because > > > SMP=y > > > since > > > config ARCH_HIBERNATION_POSSIBLE > > > def_bool y > > > - depends on !SMP || !X86_VOYAGER > > > + depends on !SMP > > > > > > The condition was wrong, ok, anyway it worked. Would > > > depends on !SMP || EXPERIMENTAL > > > make sense? The smp is handled in disable_nonboot_cpus manner, right? > > > > Ah, someone removed X86_VOYAGER and left this gem. I guess that went in > > through -tip (Ingo CCed). > > > > After removing X86_VOYAGER, ARCH_HIBERNATION_POSSIBLE should always be set > > on x86. Just make it > > > > config ARCH_HIBERNATION_POSSIBLE > > def_bool y > > heh, indeed :-) Fixed via the commit below. Would it be viable to fold that into aced3ce, so that bisectability is not broken between the two? Rafael > ----------------> > From 17993b49b1f540aace8e9b4242530d0b3376eb2a Mon Sep 17 00:00:00 2001 > From: Ingo Molnar <mingo@elte.hu> > Date: Wed, 11 Feb 2009 17:20:51 +0100 > Subject: [PATCH] x86: make hibernation always-possible > > This commit: > > aced3ce: x86/Voyager: remove HIBERNATION Kconfig quirk > > Made hibernation only available on UP - instead of making it available > on all of x86. Fix it. > > Reported-by: Jiri Slaby <jirislaby@gmail.com> > Signed-off-by: Ingo Molnar <mingo@elte.hu> > --- > arch/x86/Kconfig | 1 - > 1 files changed, 0 insertions(+), 1 deletions(-) > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 4a27aa4..148c112 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -140,7 +140,6 @@ config HAVE_CPUMASK_OF_CPU_MAP > > config ARCH_HIBERNATION_POSSIBLE > def_bool y > - depends on !SMP > > config ARCH_SUSPEND_POSSIBLE > def_bool y ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 16:22 ` Ingo Molnar 2009-02-11 21:22 ` Rafael J. Wysocki @ 2009-02-11 21:22 ` Rafael J. Wysocki 2009-02-13 9:37 ` Pavel Machek 2009-02-13 9:37 ` Pavel Machek 3 siblings, 0 replies; 44+ messages in thread From: Rafael J. Wysocki @ 2009-02-11 21:22 UTC (permalink / raw) To: Ingo Molnar Cc: mm-commits, Jiri Slaby, linux-kernel, linux-acpi, Pavel Machek, Linux-pm mailing list On Wednesday 11 February 2009, Ingo Molnar wrote: > > * Rafael J. Wysocki <rjw@sisk.pl> wrote: > > > On Wednesday 11 February 2009, Jiri Slaby wrote: > > > On 02/11/2009 09:51 AM, Jiri Slaby wrote: > > > > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: > > > >> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > > > > > > > Hi, > > > > > > > > I've found out, that S4 disappeared in this release, in comparison to mmotm > > > > based on 2.6.29-rc2: > > > > -ACPI: (supports S0 S1 S3 S4 S5) > > > > +ACPI: (supports S0 S1 S3 S5) > > > > > > > > Any ideas what could have caused this? > > > > > > I think this one > > > ARCH_HIBERNATION_POSSIBLE=n > > > because > > > SMP=y > > > since > > > config ARCH_HIBERNATION_POSSIBLE > > > def_bool y > > > - depends on !SMP || !X86_VOYAGER > > > + depends on !SMP > > > > > > The condition was wrong, ok, anyway it worked. Would > > > depends on !SMP || EXPERIMENTAL > > > make sense? The smp is handled in disable_nonboot_cpus manner, right? > > > > Ah, someone removed X86_VOYAGER and left this gem. I guess that went in > > through -tip (Ingo CCed). > > > > After removing X86_VOYAGER, ARCH_HIBERNATION_POSSIBLE should always be set > > on x86. Just make it > > > > config ARCH_HIBERNATION_POSSIBLE > > def_bool y > > heh, indeed :-) Fixed via the commit below. Would it be viable to fold that into aced3ce, so that bisectability is not broken between the two? Rafael > ----------------> > From 17993b49b1f540aace8e9b4242530d0b3376eb2a Mon Sep 17 00:00:00 2001 > From: Ingo Molnar <mingo@elte.hu> > Date: Wed, 11 Feb 2009 17:20:51 +0100 > Subject: [PATCH] x86: make hibernation always-possible > > This commit: > > aced3ce: x86/Voyager: remove HIBERNATION Kconfig quirk > > Made hibernation only available on UP - instead of making it available > on all of x86. Fix it. > > Reported-by: Jiri Slaby <jirislaby@gmail.com> > Signed-off-by: Ingo Molnar <mingo@elte.hu> > --- > arch/x86/Kconfig | 1 - > 1 files changed, 0 insertions(+), 1 deletions(-) > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 4a27aa4..148c112 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -140,7 +140,6 @@ config HAVE_CPUMASK_OF_CPU_MAP > > config ARCH_HIBERNATION_POSSIBLE > def_bool y > - depends on !SMP > > config ARCH_SUSPEND_POSSIBLE > def_bool y ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 16:22 ` Ingo Molnar 2009-02-11 21:22 ` Rafael J. Wysocki 2009-02-11 21:22 ` Rafael J. Wysocki @ 2009-02-13 9:37 ` Pavel Machek 2009-02-13 9:37 ` Pavel Machek 3 siblings, 0 replies; 44+ messages in thread From: Pavel Machek @ 2009-02-13 9:37 UTC (permalink / raw) To: Ingo Molnar Cc: Rafael J. Wysocki, Jiri Slaby, linux-kernel, mm-commits, Len Brown, linux-acpi, Linux-pm mailing list > ----------------> > From 17993b49b1f540aace8e9b4242530d0b3376eb2a Mon Sep 17 00:00:00 2001 > From: Ingo Molnar <mingo@elte.hu> > Date: Wed, 11 Feb 2009 17:20:51 +0100 > Subject: [PATCH] x86: make hibernation always-possible > > This commit: > > aced3ce: x86/Voyager: remove HIBERNATION Kconfig quirk > > Made hibernation only available on UP - instead of making it available > on all of x86. Fix it. > > Reported-by: Jiri Slaby <jirislaby@gmail.com> > Signed-off-by: Ingo Molnar <mingo@elte.hu> ACK. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 16:22 ` Ingo Molnar ` (2 preceding siblings ...) 2009-02-13 9:37 ` Pavel Machek @ 2009-02-13 9:37 ` Pavel Machek 3 siblings, 0 replies; 44+ messages in thread From: Pavel Machek @ 2009-02-13 9:37 UTC (permalink / raw) To: Ingo Molnar Cc: mm-commits, Jiri Slaby, linux-kernel, linux-acpi, Linux-pm mailing list > ----------------> > From 17993b49b1f540aace8e9b4242530d0b3376eb2a Mon Sep 17 00:00:00 2001 > From: Ingo Molnar <mingo@elte.hu> > Date: Wed, 11 Feb 2009 17:20:51 +0100 > Subject: [PATCH] x86: make hibernation always-possible > > This commit: > > aced3ce: x86/Voyager: remove HIBERNATION Kconfig quirk > > Made hibernation only available on UP - instead of making it available > on all of x86. Fix it. > > Reported-by: Jiri Slaby <jirislaby@gmail.com> > Signed-off-by: Ingo Molnar <mingo@elte.hu> ACK. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: ACPI: S4 disappeared [mmotm 2009-02-10-16-35] 2009-02-11 8:51 ` Jiri Slaby 2009-02-11 10:17 ` Jiri Slaby @ 2009-02-11 10:17 ` Jiri Slaby 1 sibling, 0 replies; 44+ messages in thread From: Jiri Slaby @ 2009-02-11 10:17 UTC (permalink / raw) To: Jiri Slaby Cc: mm-commits, linux-kernel, linux-acpi, Pavel Machek, Linux-pm mailing list On 02/11/2009 09:51 AM, Jiri Slaby wrote: > On 02/11/2009 01:36 AM, akpm@linux-foundation.org wrote: >> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded > > Hi, > > I've found out, that S4 disappeared in this release, in comparison to mmotm > based on 2.6.29-rc2: > -ACPI: (supports S0 S1 S3 S4 S5) > +ACPI: (supports S0 S1 S3 S5) > > Any ideas what could have caused this? I think this one ARCH_HIBERNATION_POSSIBLE=n because SMP=y since config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on !SMP || !X86_VOYAGER + depends on !SMP The condition was wrong, ok, anyway it worked. Would depends on !SMP || EXPERIMENTAL make sense? The smp is handled in disable_nonboot_cpus manner, right? ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded 2009-02-11 0:36 mmotm 2009-02-10-16-35 uploaded akpm ` (2 preceding siblings ...) 2009-02-11 8:51 ` Jiri Slaby @ 2009-02-11 16:48 ` Randy Dunlap 2009-02-11 16:58 ` mmotm 2009-02-10-16-35 uploaded (s1d13xfb) Randy Dunlap 2009-02-11 17:06 ` mmotm 2009-02-10-16-35 uploaded (reiser4-quota) Randy Dunlap 5 siblings, 0 replies; 44+ messages in thread From: Randy Dunlap @ 2009-02-11 16:48 UTC (permalink / raw) To: linux-kernel; +Cc: Andrew Morton akpm@linux-foundation.org wrote: > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to > > http://userweb.kernel.org/~akpm/mmotm/ > > and will soon be available at > > git://git.zen-sources.org/zen/mmotm.git mmotm-2009-0210-1635/mm/shmem.c: In function 'shmem_zero_setup': mmotm-2009-0210-1635/mm/shmem.c:2670: error: implicit declaration of function 'ima_shm_check' needs the patch posted yesterday by Mimi Zohar: http://lkml.org/lkml/2009/2/10/553 -- ~Randy ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (s1d13xfb) 2009-02-11 0:36 mmotm 2009-02-10-16-35 uploaded akpm ` (3 preceding siblings ...) 2009-02-11 16:48 ` mmotm 2009-02-10-16-35 uploaded Randy Dunlap @ 2009-02-11 16:58 ` Randy Dunlap 2009-02-11 22:01 ` Kristoffer Ericson 2009-02-11 17:06 ` mmotm 2009-02-10-16-35 uploaded (reiser4-quota) Randy Dunlap 5 siblings, 1 reply; 44+ messages in thread From: Randy Dunlap @ 2009-02-11 16:58 UTC (permalink / raw) To: linux-kernel; +Cc: Andrew Morton, Kristoffer Ericson akpm@linux-foundation.org wrote: > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to > > http://userweb.kernel.org/~akpm/mmotm/ > > and will soon be available at > > git://git.zen-sources.org/zen/mmotm.git > > It contains the following patches against 2.6.29-rc4: mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:57: error: 'S1D13505_PROD_ID' undeclared here (not in a function) mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:58: error: 'S1D13506_PROD_ID' undeclared here (not in a function) mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:59: error: 'S1D13806_PROD_ID' undeclared here (not in a function) mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c: In function 's1d13xxxfb_probe': mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:637: error: 'struct s1d13xxxfb_par' has no member named 'prod_id' mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:637: warning: statement with no effect mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:638: error: 'struct s1d13xxxfb_par' has no member named 'revision' mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:638: warning: statement with no effect -- ~Randy ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (s1d13xfb) 2009-02-11 16:58 ` mmotm 2009-02-10-16-35 uploaded (s1d13xfb) Randy Dunlap @ 2009-02-11 22:01 ` Kristoffer Ericson 0 siblings, 0 replies; 44+ messages in thread From: Kristoffer Ericson @ 2009-02-11 22:01 UTC (permalink / raw) To: Randy Dunlap; +Cc: linux-kernel, Andrew Morton [-- Attachment #1: Type: text/plain, Size: 1434 bytes --] On Wed, 11 Feb 2009 08:58:11 -0800 Randy Dunlap <randy.dunlap@oracle.com> wrote: > akpm@linux-foundation.org wrote: > > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to > > > > http://userweb.kernel.org/~akpm/mmotm/ > > > > and will soon be available at > > > > git://git.zen-sources.org/zen/mmotm.git > > > > It contains the following patches against 2.6.29-rc4: > > > > mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:57: error: 'S1D13505_PROD_ID' undeclared here (not in a function) > mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:58: error: 'S1D13506_PROD_ID' undeclared here (not in a function) > mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:59: error: 'S1D13806_PROD_ID' undeclared here (not in a function) > mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c: In function 's1d13xxxfb_probe': > mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:637: error: 'struct s1d13xxxfb_par' has no member named 'prod_id' > mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:637: warning: statement with no effect > mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:638: error: 'struct s1d13xxxfb_par' has no member named 'revision' > mmotm-2009-0210-1635/drivers/video/s1d13xxxfb.c:638: warning: statement with no effect Doh! Seems like I left my brain at home. Will drop patch to Andrew right away. > > -- > ~Randy -- Kristoffer Ericson <kristoffer.ericson@gmail.com> [-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --] ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (reiser4-quota) 2009-02-11 0:36 mmotm 2009-02-10-16-35 uploaded akpm ` (4 preceding siblings ...) 2009-02-11 16:58 ` mmotm 2009-02-10-16-35 uploaded (s1d13xfb) Randy Dunlap @ 2009-02-11 17:06 ` Randy Dunlap 2009-02-11 17:13 ` Jan Kara 5 siblings, 1 reply; 44+ messages in thread From: Randy Dunlap @ 2009-02-11 17:06 UTC (permalink / raw) To: linux-kernel; +Cc: Andrew Morton, jack, ReiserFS Mailing List akpm@linux-foundation.org wrote: > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to > > http://userweb.kernel.org/~akpm/mmotm/ > > and will soon be available at > > git://git.zen-sources.org/zen/mmotm.git mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:456: error: implicit declaration of function 'DQUOT_TRANSFER' mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:596: error: implicit declaration of function 'DQUOT_ALLOC_INODE' mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:597: error: implicit declaration of function 'DQUOT_DROP' mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:611: error: implicit declaration of function 'DQUOT_FREE_INODE' -- ~Randy ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (reiser4-quota) 2009-02-11 17:06 ` mmotm 2009-02-10-16-35 uploaded (reiser4-quota) Randy Dunlap @ 2009-02-11 17:13 ` Jan Kara 2009-02-11 17:23 ` Edward Shishkin 2009-02-12 2:49 ` KOSAKI Motohiro 0 siblings, 2 replies; 44+ messages in thread From: Jan Kara @ 2009-02-11 17:13 UTC (permalink / raw) To: Randy Dunlap; +Cc: linux-kernel, Andrew Morton, ReiserFS Mailing List On Wed 11-02-09 09:06:53, Randy Dunlap wrote: > akpm@linux-foundation.org wrote: > > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to > > > > http://userweb.kernel.org/~akpm/mmotm/ > > > > and will soon be available at > > > > git://git.zen-sources.org/zen/mmotm.git > > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:456: error: implicit declaration of function 'DQUOT_TRANSFER' > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:596: error: implicit declaration of function 'DQUOT_ALLOC_INODE' > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:597: error: implicit declaration of function 'DQUOT_DROP' > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:611: error: implicit declaration of function 'DQUOT_FREE_INODE' Ah, out of tree filesystems... Could some of Reiser4 guys convert the quota names (they should be vfs_dq_transfer, vfs_dq_alloc_inode, vfs_dq_drop, vfs_dq_free_inode)? I suppose I could do it myself but I'm not sure if it won't clash with some other changes. Thanks for report Randy. Honza -- Jan Kara <jack@suse.cz> SUSE Labs, CR ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (reiser4-quota) 2009-02-11 17:13 ` Jan Kara @ 2009-02-11 17:23 ` Edward Shishkin 2009-02-12 2:49 ` KOSAKI Motohiro 1 sibling, 0 replies; 44+ messages in thread From: Edward Shishkin @ 2009-02-11 17:23 UTC (permalink / raw) To: Jan Kara; +Cc: Randy Dunlap, linux-kernel, Andrew Morton, ReiserFS Mailing List Jan Kara wrote: > On Wed 11-02-09 09:06:53, Randy Dunlap wrote: > >> akpm@linux-foundation.org wrote: >> >>> The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to >>> >>> http://userweb.kernel.org/~akpm/mmotm/ >>> >>> and will soon be available at >>> >>> git://git.zen-sources.org/zen/mmotm.git >>> >> mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:456: error: implicit declaration of function 'DQUOT_TRANSFER' >> mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:596: error: implicit declaration of function 'DQUOT_ALLOC_INODE' >> mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:597: error: implicit declaration of function 'DQUOT_DROP' >> mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:611: error: implicit declaration of function 'DQUOT_FREE_INODE' >> > Ah, out of tree filesystems... Could some of Reiser4 guys convert the > quota names (they should be vfs_dq_transfer, vfs_dq_alloc_inode, > Ok, I'll fix it at the near future. Edward. > vfs_dq_drop, vfs_dq_free_inode)? I suppose I could do it myself but I'm not > sure if it won't clash with some other changes. > Thanks for report Randy. > > Honza > ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (reiser4-quota) 2009-02-11 17:13 ` Jan Kara 2009-02-11 17:23 ` Edward Shishkin @ 2009-02-12 2:49 ` KOSAKI Motohiro 2009-02-12 2:53 ` Andrew Morton 2009-02-12 4:13 ` Volker Armin Hemmann 1 sibling, 2 replies; 44+ messages in thread From: KOSAKI Motohiro @ 2009-02-12 2:49 UTC (permalink / raw) To: Jan Kara Cc: kosaki.motohiro, Randy Dunlap, linux-kernel, Andrew Morton, ReiserFS Mailing List > On Wed 11-02-09 09:06:53, Randy Dunlap wrote: > > akpm@linux-foundation.org wrote: > > > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to > > > > > > http://userweb.kernel.org/~akpm/mmotm/ > > > > > > and will soon be available at > > > > > > git://git.zen-sources.org/zen/mmotm.git > > > > > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:456: error: implicit declaration of function 'DQUOT_TRANSFER' > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:596: error: implicit declaration of function 'DQUOT_ALLOC_INODE' > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:597: error: implicit declaration of function 'DQUOT_DROP' > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:611: error: implicit declaration of function 'DQUOT_FREE_INODE' > Ah, out of tree filesystems... Could some of Reiser4 guys convert the > quota names (they should be vfs_dq_transfer, vfs_dq_alloc_inode, > vfs_dq_drop, vfs_dq_free_inode)? I suppose I could do it myself but I'm not > sure if it won't clash with some other changes. > Thanks for report Randy. > > Honza Andrew, recently I've never seen any reiser4 activity in LKML. I would suggest to remove it from -mm. ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (reiser4-quota) 2009-02-12 2:49 ` KOSAKI Motohiro @ 2009-02-12 2:53 ` Andrew Morton 2009-02-20 18:12 ` Zan Lynx 2009-02-12 4:13 ` Volker Armin Hemmann 1 sibling, 1 reply; 44+ messages in thread From: Andrew Morton @ 2009-02-12 2:53 UTC (permalink / raw) To: KOSAKI Motohiro Cc: Jan Kara, Randy Dunlap, linux-kernel, ReiserFS Mailing List On Thu, 12 Feb 2009 11:49:20 +0900 (JST) KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> wrote: > Andrew, recently I've never seen any reiser4 activity in LKML. > I would suggest to remove it from -mm. A handful of people use it, and the cost of carrying it is pretty low. Hey, at least it handles ENOSPC without going BUG(). ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (reiser4-quota) 2009-02-12 2:53 ` Andrew Morton @ 2009-02-20 18:12 ` Zan Lynx 2009-02-20 18:30 ` Andrew Morton 0 siblings, 1 reply; 44+ messages in thread From: Zan Lynx @ 2009-02-20 18:12 UTC (permalink / raw) To: Andrew Morton Cc: KOSAKI Motohiro, Jan Kara, Randy Dunlap, linux-kernel, ReiserFS Mailing List Andrew Morton wrote: > On Thu, 12 Feb 2009 11:49:20 +0900 (JST) KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> wrote: > >> Andrew, recently I've never seen any reiser4 activity in LKML. >> I would suggest to remove it from -mm. > > A handful of people use it, and the cost of carrying it is pretty low. > > Hey, at least it handles ENOSPC without going BUG(). I use it and love it and I think its code belongs in the kernel far more than ext4 ever did when ext4 was first added. By the way, I have been waiting for a new -mm release. :-) Are there going to be any more -mm releases or are we supposed to use mmotm only now? -- Zan Lynx zlynx@acm.org "Knowledge is Power. Power Corrupts. Study Hard. Be Evil." ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (reiser4-quota) 2009-02-20 18:12 ` Zan Lynx @ 2009-02-20 18:30 ` Andrew Morton 0 siblings, 0 replies; 44+ messages in thread From: Andrew Morton @ 2009-02-20 18:30 UTC (permalink / raw) To: Zan Lynx Cc: KOSAKI Motohiro, Jan Kara, Randy Dunlap, linux-kernel, ReiserFS Mailing List On Fri, 20 Feb 2009 11:12:31 -0700 Zan Lynx <zlynx@acm.org> wrote: > Are there going to be any more -mm releases or are we supposed to use > mmotm only now? The need for them is less now, because 95% of what was in -mm's is now in linux-next. A few people are testing -mmotm. The main thing that's missing is that doing a release forced me to test it all on a bunch of machines and I've got a bit slack in that regard now. I should get off my butt and feed mmotm into linux-next, really. It's a bit tricky, but I did work out a scheme a while back... ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: mmotm 2009-02-10-16-35 uploaded (reiser4-quota) 2009-02-12 2:49 ` KOSAKI Motohiro 2009-02-12 2:53 ` Andrew Morton @ 2009-02-12 4:13 ` Volker Armin Hemmann 1 sibling, 0 replies; 44+ messages in thread From: Volker Armin Hemmann @ 2009-02-12 4:13 UTC (permalink / raw) To: reiserfs-devel Cc: KOSAKI Motohiro, Jan Kara, Randy Dunlap, linux-kernel, Andrew Morton On Donnerstag 12 Februar 2009, KOSAKI Motohiro wrote: > > On Wed 11-02-09 09:06:53, Randy Dunlap wrote: > > > akpm@linux-foundation.org wrote: > > > > The mm-of-the-moment snapshot 2009-02-10-16-35 has been uploaded to > > > > > > > > http://userweb.kernel.org/~akpm/mmotm/ > > > > > > > > and will soon be available at > > > > > > > > git://git.zen-sources.org/zen/mmotm.git > > > > > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:456: error: implicit > > > declaration of function 'DQUOT_TRANSFER' > > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:596: error: implicit > > > declaration of function 'DQUOT_ALLOC_INODE' > > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:597: error: implicit > > > declaration of function 'DQUOT_DROP' > > > mmotm-2009-0210-1635/fs/reiser4/plugin/inode_ops.c:611: error: implicit > > > declaration of function 'DQUOT_FREE_INODE' > > > > Ah, out of tree filesystems... Could some of Reiser4 guys convert the > > quota names (they should be vfs_dq_transfer, vfs_dq_alloc_inode, > > vfs_dq_drop, vfs_dq_free_inode)? I suppose I could do it myself but I'm > > not sure if it won't clash with some other changes. > > Thanks for report Randy. > > > > Honza > > Andrew, recently I've never seen any reiser4 activity in LKML. > I would suggest to remove it from -mm. maybe you should look at the reiser4 list before asking for that? ^ permalink raw reply [flat|nested] 44+ messages in thread
end of thread, other threads:[~2009-02-20 18:32 UTC | newest] Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-02-11 0:36 mmotm 2009-02-10-16-35 uploaded akpm 2009-02-11 8:44 ` dead USB devices after resume [mmotm 2009-02-10-16-35] Jiri Slaby 2009-02-11 8:44 ` Jiri Slaby 2009-02-11 9:44 ` Rafael J. Wysocki 2009-02-11 9:54 ` Jiri Slaby 2009-02-11 9:54 ` Jiri Slaby 2009-02-11 13:38 ` Jiri Slaby 2009-02-11 13:38 ` Jiri Slaby 2009-02-11 21:49 ` Rafael J. Wysocki 2009-02-11 21:49 ` Rafael J. Wysocki 2009-02-11 15:53 ` Alan Stern 2009-02-11 15:53 ` Alan Stern 2009-02-13 10:40 ` Jiri Slaby 2009-02-13 10:40 ` Jiri Slaby 2009-02-13 15:26 ` Alan Stern 2009-02-13 15:26 ` Alan Stern 2009-02-16 13:50 ` Jiri Slaby 2009-02-16 13:50 ` Jiri Slaby 2009-02-16 19:58 ` Alan Stern 2009-02-16 19:58 ` Alan Stern 2009-02-13 18:19 ` Jiri Kosina 2009-02-11 8:51 ` ACPI: S4 disappeared " Jiri Slaby 2009-02-11 8:51 ` Jiri Slaby 2009-02-11 10:17 ` Jiri Slaby 2009-02-11 15:43 ` Rafael J. Wysocki 2009-02-11 15:43 ` Rafael J. Wysocki 2009-02-11 16:22 ` Ingo Molnar 2009-02-11 16:22 ` Ingo Molnar 2009-02-11 21:22 ` Rafael J. Wysocki 2009-02-11 21:22 ` Rafael J. Wysocki 2009-02-13 9:37 ` Pavel Machek 2009-02-13 9:37 ` Pavel Machek 2009-02-11 10:17 ` Jiri Slaby 2009-02-11 16:48 ` mmotm 2009-02-10-16-35 uploaded Randy Dunlap 2009-02-11 16:58 ` mmotm 2009-02-10-16-35 uploaded (s1d13xfb) Randy Dunlap 2009-02-11 22:01 ` Kristoffer Ericson 2009-02-11 17:06 ` mmotm 2009-02-10-16-35 uploaded (reiser4-quota) Randy Dunlap 2009-02-11 17:13 ` Jan Kara 2009-02-11 17:23 ` Edward Shishkin 2009-02-12 2:49 ` KOSAKI Motohiro 2009-02-12 2:53 ` Andrew Morton 2009-02-20 18:12 ` Zan Lynx 2009-02-20 18:30 ` Andrew Morton 2009-02-12 4:13 ` Volker Armin Hemmann
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.