* Re: pm-suspend working, but pm-hibernate fails
2010-02-25 22:37 ` Rafael J. Wysocki
@ 2010-02-25 22:49 ` Ákos Maróy
2010-02-25 22:57 ` Rafael J. Wysocki
2010-02-25 23:32 ` Alan Stern
0 siblings, 2 replies; 15+ messages in thread
From: Ákos Maróy @ 2010-02-25 22:49 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-pm
[-- Attachment #1: Type: text/plain, Size: 1398 bytes --]
Rafael,
> Please try
>
> # echo core > /sys/power/pm_test
> # echo disk > /sys/power/state
>
> That should return to the command prompt after ~5 sec.
thanks. indeed, it does return, this is what I get in /var/log/messages:
Feb 25 23:46:24 tonkachi kernel: [ 77.846865] PM: Syncing filesystems
... done.
Feb 25 23:46:24 tonkachi kernel: [ 77.997120] Freezing user space
processes ... (elapsed 0.00 seconds) done.
Feb 25 23:46:24 tonkachi kernel: [ 77.998042] Freezing remaining
freezable tasks ... (elapsed 0.00 seconds) done.
Feb 25 23:46:24 tonkachi kernel: [ 77.998269] PM: Preallocating image
memory... done (allocated 1936029 pages)
Feb 25 23:46:24 tonkachi kernel: [ 80.480913] PM: Allocated 7744116
kbytes in 2.48 seconds (3122.62 MB/s)
Feb 25 23:46:24 tonkachi kernel: [ 80.480918] Suspending console(s)
(use no_console_suspend to debug)
Feb 25 23:46:24 tonkachi kernel: [ 81.030959] Registered led device:
iwl-phy0::radio
Feb 25 23:46:24 tonkachi kernel: [ 81.030989] Registered led device:
iwl-phy0::assoc
Feb 25 23:46:24 tonkachi kernel: [ 81.031016] Registered led device:
iwl-phy0::RX
Feb 25 23:46:24 tonkachi kernel: [ 81.031041] Registered led device:
iwl-phy0::TX
Feb 25 23:46:24 tonkachi kernel: [ 81.166877] Restarting tasks ...
Feb 25 23:46:24 tonkachi kernel: [ 81.169743] done.
my dmesg is much more talkative - please find it attached.
Akos
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 145513 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.8-usb-debug (root@tonkachi) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #1 SMP Thu Feb 25 22:03:46 CET 2010
[ 0.000000] Command line: root=/dev/mapper/isw_cdfcbdcfed_RAID-02 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf682000 (usable)
[ 0.000000] BIOS-e820: 00000000bf682000 - 00000000bf6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6bf000 - 00000000bf75c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf75c000 - 00000000bf7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7bf000 - 00000000bf7e4000 (usable)
[ 0.000000] BIOS-e820: 00000000bf7e4000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-combining
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009bc00 (usable)
[ 0.000000] modified: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf682000 (usable)
[ 0.000000] modified: 00000000bf682000 - 00000000bf6bf000 (reserved)
[ 0.000000] modified: 00000000bf6bf000 - 00000000bf75c000 (usable)
[ 0.000000] modified: 00000000bf75c000 - 00000000bf7bf000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7bf000 - 00000000bf7e4000 (usable)
[ 0.000000] modified: 00000000bf7e4000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] modified: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] modified: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ a000-14000
[ 0.000000] RAMDISK: 33d19000 - 37fef0a6
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bf7fe120 0009C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bf7ee000 0ABEA (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bf76e000 00040
[ 0.000000] ACPI: ASF! 00000000bf7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000bf7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000bf7ed000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7ec000 0073D (v01 TrmRef PtidDevc 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bf7eb000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
[ 0.000000] ACPI: BOOT 00000000bf7ea000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7e9000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bf7e8000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
[ 0.000000] ACPI: SPCR 00000000bf7e7000 00050 (v01 HPQOEM SLIC-MPC 00000000 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000bf7e6000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 00000000bf7e5000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7e4000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [000000000000f000 - 0000000000013fff]
[ 0.000000] bootmap [0000000000014000 - 000000000005bfff] pages 48
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0240000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a157c4] TEXT DATA BSS ==> [0001000000 - 0001a157c4]
[ 0.000000] #3 [0033d19000 - 0037fef0a6] RAMDISK ==> [0033d19000 - 0037fef0a6]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [0001a16000 - 0001a16230] BRK ==> [0001a16000 - 0001a16230]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bf682
[ 0.000000] 0: 0x000bf6bf -> 0x000bf75c
[ 0.000000] 0: 0x000bf7bf -> 0x000bf7e4
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2094811
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 110 pages reserved
[ 0.000000] DMA zone: 3824 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765821 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf682000 - 00000000bf6bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf75c000 - 00000000bf7bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e4000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000
[ 0.000000] PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91224 r8192 d23464 u262144
[ 0.000000] pcpu-alloc: s91224 r8192 d23464 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062445
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/isw_cdfcbdcfed_RAID-02 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8118524k/9437184k available (5407k kernel code, 1057940k absent, 260720k reserved, 3084k data, 692k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 25 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 26 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 27 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 28 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 1595.779 MHz processor.
[ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.55 BogoMIPS (lpj=15957790)
[ 0.000026] Security Framework initialized
[ 0.000031] SELinux: Disabled at boot.
[ 0.000731] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002931] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003852] Mount-cache hash table entries: 256
[ 0.003959] Initializing cgroup subsys ns
[ 0.003962] Initializing cgroup subsys cpuacct
[ 0.003967] Initializing cgroup subsys memory
[ 0.003972] Initializing cgroup subsys freezer
[ 0.003974] Initializing cgroup subsys net_cls
[ 0.003990] CPU: Physical Processor ID: 0
[ 0.003992] CPU: Processor Core ID: 0
[ 0.003995] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003998] CPU: L2 cache: 256K
[ 0.003999] CPU: L3 cache: 6144K
[ 0.004002] CPU 0/0x0 -> Node 0
[ 0.004005] mce: CPU supports 9 MCE banks
[ 0.004016] CPU0: Thermal monitoring enabled (TM1)
[ 0.004020] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.004029] using mwait in idle threads.
[ 0.004031] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.004036] ... version: 3
[ 0.004038] ... bit width: 48
[ 0.004039] ... generic registers: 4
[ 0.004041] ... value mask: 0000ffffffffffff
[ 0.004042] ... max period: 000000007fffffff
[ 0.004044] ... fixed-purpose events: 3
[ 0.004045] ... event mask: 000000070000000f
[ 0.006508] ACPI: Core revision 20090903
[ 0.039575] Setting APIC routing to flat
[ 0.039953] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.139855] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.257764] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.268340] Initializing CPU#1
[ 0.417495] CPU: Physical Processor ID: 0
[ 0.417496] CPU: Processor Core ID: 1
[ 0.417499] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.417501] CPU: L2 cache: 256K
[ 0.417502] CPU: L3 cache: 6144K
[ 0.417505] CPU 1/0x2 -> Node 0
[ 0.417517] CPU1: Thermal monitoring enabled (TM1)
[ 0.417521] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.417617] CPU1: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.417629] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.437694] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.448031] Initializing CPU#2
[ 0.597321] CPU: Physical Processor ID: 0
[ 0.597323] CPU: Processor Core ID: 2
[ 0.597325] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.597327] CPU: L2 cache: 256K
[ 0.597329] CPU: L3 cache: 6144K
[ 0.597331] CPU 2/0x4 -> Node 0
[ 0.597343] CPU2: Thermal monitoring enabled (TM1)
[ 0.597347] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.597447] CPU2: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.597458] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.617525] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.627862] Initializing CPU#3
[ 0.777147] CPU: Physical Processor ID: 0
[ 0.777149] CPU: Processor Core ID: 3
[ 0.777152] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.777154] CPU: L2 cache: 256K
[ 0.777155] CPU: L3 cache: 6144K
[ 0.777157] CPU 3/0x6 -> Node 0
[ 0.777170] CPU3: Thermal monitoring enabled (TM1)
[ 0.777173] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.777277] CPU3: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.777288] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.797357] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.807699] Initializing CPU#4
[ 0.956975] CPU: Physical Processor ID: 0
[ 0.956976] CPU: Processor Core ID: 0
[ 0.956980] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.956982] CPU: L2 cache: 256K
[ 0.956984] CPU: L3 cache: 6144K
[ 0.956987] CPU 4/0x1 -> Node 0
[ 0.957000] CPU4: Thermal monitoring enabled (TM1)
[ 0.957004] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.957029] CPU4: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.957042] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.977111] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.987447] Initializing CPU#5
[ 1.136800] CPU: Physical Processor ID: 0
[ 1.136801] CPU: Processor Core ID: 1
[ 1.136804] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.136806] CPU: L2 cache: 256K
[ 1.136807] CPU: L3 cache: 6144K
[ 1.136810] CPU 5/0x3 -> Node 0
[ 1.136822] CPU5: Thermal monitoring enabled (TM1)
[ 1.136825] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.136864] CPU5: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 1.136876] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 1.156942] Booting processor 6 APIC 0x5 ip 0x6000
[ 1.167279] Initializing CPU#6
[ 1.316626] CPU: Physical Processor ID: 0
[ 1.316628] CPU: Processor Core ID: 2
[ 1.316630] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.316632] CPU: L2 cache: 256K
[ 1.316633] CPU: L3 cache: 6144K
[ 1.316636] CPU 6/0x5 -> Node 0
[ 1.316648] CPU6: Thermal monitoring enabled (TM1)
[ 1.316651] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.316695] CPU6: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 1.316707] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 1.336775] Booting processor 7 APIC 0x7 ip 0x6000
[ 1.347111] Initializing CPU#7
[ 1.496452] CPU: Physical Processor ID: 0
[ 1.496454] CPU: Processor Core ID: 3
[ 1.496457] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.496458] CPU: L2 cache: 256K
[ 1.496460] CPU: L3 cache: 6144K
[ 1.496462] CPU 7/0x7 -> Node 0
[ 1.496474] CPU7: Thermal monitoring enabled (TM1)
[ 1.496477] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.496527] CPU7: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 1.496539] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 1.516540] Brought up 8 CPUs
[ 1.516543] Total of 8 processors activated (25535.22 BogoMIPS).
[ 1.520265] CPU0 attaching sched-domain:
[ 1.520269] domain 0: span 0,4 level SIBLING
[ 1.520272] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.520277] domain 1: span 0-7 level MC
[ 1.520280] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.520290] CPU1 attaching sched-domain:
[ 1.520292] domain 0: span 1,5 level SIBLING
[ 1.520295] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.520299] domain 1: span 0-7 level MC
[ 1.520302] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.520311] CPU2 attaching sched-domain:
[ 1.520312] domain 0: span 2,6 level SIBLING
[ 1.520315] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.520320] domain 1: span 0-7 level MC
[ 1.520322] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.520330] CPU3 attaching sched-domain:
[ 1.520332] domain 0: span 3,7 level SIBLING
[ 1.520335] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.520339] domain 1: span 0-7 level MC
[ 1.520342] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.520350] CPU4 attaching sched-domain:
[ 1.520352] domain 0: span 0,4 level SIBLING
[ 1.520354] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.520359] domain 1: span 0-7 level MC
[ 1.520361] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.520370] CPU5 attaching sched-domain:
[ 1.520372] domain 0: span 1,5 level SIBLING
[ 1.520374] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.520379] domain 1: span 0-7 level MC
[ 1.520381] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.520390] CPU6 attaching sched-domain:
[ 1.520392] domain 0: span 2,6 level SIBLING
[ 1.520394] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.520399] domain 1: span 0-7 level MC
[ 1.520401] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.520410] CPU7 attaching sched-domain:
[ 1.520412] domain 0: span 3,7 level SIBLING
[ 1.520414] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.520419] domain 1: span 0-7 level MC
[ 1.520421] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.521089] regulator: core version 0.5
[ 1.521120] Time: 22:45:04 Date: 02/25/10
[ 1.521163] NET: Registered protocol family 16
[ 1.521269] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.521272] ACPI: bus type pci registered
[ 1.521357] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.521360] PCI: MCFG area at e0000000 reserved in E820
[ 1.530448] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.530450] PCI: Using configuration type 1 for base access
[ 1.531317] bio: create slab <bio-0> at 0
[ 1.532877] ACPI: EC: Look up EC in DSDT
[ 1.534640] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.539336] ACPI: BIOS _OSI(Linux) query ignored
[ 1.551624] ACPI Error (psargs-0359): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
[ 1.551635] ACPI Error (psparse-0537): Method parse/execution failed [\CPUT] (Node ffff8802370570a0), AE_NOT_FOUND
[ 1.551684] ACPI Error (psparse-0537): Method parse/execution failed [\PSSC] (Node ffff8802370570c0), AE_NOT_FOUND
[ 1.551732] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._REG] (Node ffff88023703fa60), AE_NOT_FOUND
[ 1.551799] Fail in evaluating the _REG object of EC device. Broken bios is suspected.
[ 1.551896] ACPI: Interpreter enabled
[ 1.551900] ACPI: (supports S0 S3 S4 S5)
[ 1.551948] ACPI: Using IOAPIC for interrupt routing
[ 1.564465] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 1.565393] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.566441] _OSC invalid UUID
[ 1.566444] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.566590] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.566594] pci 0000:00:03.0: PME# disabled
[ 1.566660] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.566663] pci 0000:00:05.0: PME# disabled
[ 1.566996] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd4200000-0xd4203fff]
[ 1.567048] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.567057] pci 0000:00:1b.0: PME# disabled
[ 1.567140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.567148] pci 0000:00:1c.0: PME# disabled
[ 1.567227] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.567235] pci 0000:00:1c.1: PME# disabled
[ 1.567307] pci 0000:00:1d.0: reg 10 32bit mmio: [0xd4205800-0xd4205bff]
[ 1.567373] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.567382] pci 0000:00:1d.0: PME# disabled
[ 1.567617] pci 0000:00:1f.2: reg 10 io port: [0x5048-0x504f]
[ 1.567628] pci 0000:00:1f.2: reg 14 io port: [0x5054-0x5057]
[ 1.567639] pci 0000:00:1f.2: reg 18 io port: [0x5040-0x5047]
[ 1.567650] pci 0000:00:1f.2: reg 1c io port: [0x5050-0x5053]
[ 1.567660] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
[ 1.567671] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd4205000-0xd42057ff]
[ 1.567713] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.567722] pci 0000:00:1f.2: PME# disabled
[ 1.567769] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd4205c00-0xd4205cff]
[ 1.567787] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 1.567860] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 1.567870] pci 0000:01:00.0: reg 18 64bit mmio: [0xd4100000-0xd411ffff]
[ 1.567876] pci 0000:01:00.0: reg 20 io port: [0x4000-0x40ff]
[ 1.567886] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 1.567906] pci 0000:01:00.0: supports D1 D2
[ 1.567941] pci 0000:01:00.1: reg 10 64bit mmio: [0xd4120000-0xd4123fff]
[ 1.567979] pci 0000:01:00.1: supports D1 D2
[ 1.568017] pci 0000:00:03.0: bridge io port: [0x4000-0x4fff]
[ 1.568020] pci 0000:00:03.0: bridge 32bit mmio: [0xd4100000-0xd41fffff]
[ 1.568026] pci 0000:00:03.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 1.568075] pci 0000:02:00.0: reg 10 64bit mmio: [0xd4000000-0xd4001fff]
[ 1.568129] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.568135] pci 0000:02:00.0: PME# disabled
[ 1.568176] pci 0000:00:05.0: bridge 32bit mmio: [0xd4000000-0xd40fffff]
[ 1.568765] pci 0000:03:00.0: reg 10 64bit mmio: [0xd3000000-0xd3001fff]
[ 1.569539] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.569579] pci 0000:03:00.0: PME# disabled
[ 1.569838] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 1.569847] pci 0000:00:1c.0: bridge 32bit mmio: [0xd3000000-0xd3ffffff]
[ 1.569858] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xd0ffffff]
[ 1.569931] pci 0000:04:00.0: reg 10 64bit mmio: [0xd2000000-0xd203ffff]
[ 1.569945] pci 0000:04:00.0: reg 18 io port: [0x2000-0x207f]
[ 1.570017] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.570026] pci 0000:04:00.0: PME# disabled
[ 1.570086] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 1.570095] pci 0000:00:1c.1: bridge 32bit mmio: [0xd2000000-0xd2ffffff]
[ 1.570106] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1000000-0xd1ffffff]
[ 1.570165] pci 0000:00:1e.0: transparent bridge
[ 1.570217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.570508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.570731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.570869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.571048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
[ 1.571185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG5._PRT]
[ 1.571430] _OSC invalid UUID
[ 1.584153] ACPI: PCI Root Bridge [CPBG] (0000:ff)
[ 1.585205] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.585390] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.585569] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.585749] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.585931] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.586109] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.586288] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.586474] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.586620] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.586631] vgaarb: loaded
[ 1.586727] SCSI subsystem initialized
[ 1.586859] libata version 3.00 loaded.
[ 1.586934] usbcore: registered new interface driver usbfs
[ 1.586948] usbcore: registered new interface driver hub
[ 1.586975] usbcore: registered new device driver usb
[ 1.587130] ACPI: WMI: Mapper loaded
[ 1.587132] PCI: Using ACPI for IRQ routing
[ 1.587437] Bluetooth: Core ver 2.15
[ 1.587468] NET: Registered protocol family 31
[ 1.587470] Bluetooth: HCI device and connection manager initialized
[ 1.587472] Bluetooth: HCI socket layer initialized
[ 1.587474] NetLabel: Initializing
[ 1.587476] NetLabel: domain hash size = 128
[ 1.587477] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.587490] NetLabel: unlabeled traffic allowed by default
[ 1.587531] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 1.587538] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.596433] hpet: hpet2 irq 24 for MSI
[ 1.596592] hpet: hpet3 irq 25 for MSI
[ 1.606593] hpet: hpet4 irq 26 for MSI
[ 1.616586] hpet: hpet5 irq 27 for MSI
[ 1.626489] hpet: hpet6 irq 28 for MSI
[ 1.656471] Switching to clocksource tsc
[ 1.658121] pnp: PnP ACPI init
[ 1.658130] ACPI: bus type pnp registered
[ 1.661142] alloc irq_desc for 23 on node 0
[ 1.661144] alloc kstat_irqs on node 0
[ 1.663442] pnp: PnP ACPI: found 12 devices
[ 1.663444] ACPI: ACPI bus type pnp unregistered
[ 1.663455] system 00:05: ioport range 0x680-0x69f has been reserved
[ 1.663458] system 00:05: ioport range 0x800-0x80f has been reserved
[ 1.663461] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 1.663464] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 1.663467] system 00:05: ioport range 0x400-0x47f has been reserved
[ 1.663469] system 00:05: ioport range 0x500-0x57f has been reserved
[ 1.663472] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 1.663475] system 00:05: ioport range 0x380-0x38e has been reserved
[ 1.663482] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.663486] system 00:0a: iomem range 0xfed1b000-0xfed1bfff has been reserved
[ 1.663489] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.663491] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.663495] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.663498] system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved
[ 1.663501] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.663504] system 00:0a: iomem range 0x0-0xfff could not be reserved
[ 1.668184] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 1.668341] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 1.668345] pci 0000:00:03.0: IO window: 0x4000-0x4fff
[ 1.668349] pci 0000:00:03.0: MEM window: 0xd4100000-0xd41fffff
[ 1.668353] pci 0000:00:03.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 1.668359] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 1.668361] pci 0000:00:05.0: IO window: disabled
[ 1.668365] pci 0000:00:05.0: MEM window: 0xd4000000-0xd40fffff
[ 1.668368] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.668373] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 1.668381] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 1.668391] pci 0000:00:1c.0: MEM window: 0xd3000000-0xd3ffffff
[ 1.668400] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff
[ 1.668411] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 1.668419] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 1.668428] pci 0000:00:1c.1: MEM window: 0xd2000000-0xd2ffffff
[ 1.668437] pci 0000:00:1c.1: PREFETCH window: 0x000000d1000000-0x000000d1ffffff
[ 1.668448] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 1.668450] pci 0000:00:1e.0: IO window: disabled
[ 1.668459] pci 0000:00:1e.0: MEM window: disabled
[ 1.668467] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.668484] alloc irq_desc for 16 on node -1
[ 1.668486] alloc kstat_irqs on node -1
[ 1.668491] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.668495] pci 0000:00:03.0: setting latency timer to 64
[ 1.668502] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.668506] pci 0000:00:05.0: setting latency timer to 64
[ 1.668518] alloc irq_desc for 17 on node -1
[ 1.668519] alloc kstat_irqs on node -1
[ 1.668523] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.668528] pci 0000:00:1c.0: setting latency timer to 64
[ 1.668545] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.668554] pci 0000:00:1c.1: setting latency timer to 64
[ 1.668569] pci 0000:00:1e.0: setting latency timer to 64
[ 1.668577] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.668580] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.668583] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff]
[ 1.668585] pci_bus 0000:01: resource 1 mem: [0xd4100000-0xd41fffff]
[ 1.668588] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 1.668591] pci_bus 0000:02: resource 1 mem: [0xd4000000-0xd40fffff]
[ 1.668593] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 1.668596] pci_bus 0000:03: resource 1 mem: [0xd3000000-0xd3ffffff]
[ 1.668598] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd0ffffff]
[ 1.668601] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 1.668604] pci_bus 0000:04: resource 1 mem: [0xd2000000-0xd2ffffff]
[ 1.668606] pci_bus 0000:04: resource 2 pref mem [0xd1000000-0xd1ffffff]
[ 1.668609] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 1.668611] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.668614] pci_bus 0000:ff: resource 0 io: [0x00-0xffff]
[ 1.668616] pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.668651] NET: Registered protocol family 2
[ 1.668902] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.670064] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.673592] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.674020] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.674023] TCP reno registered
[ 1.674115] NET: Registered protocol family 1
[ 1.674168] pci 0000:00:1d.0: EHCI: BIOS handoff
[ 1.689158] pci 0000:01:00.0: Boot video device
[ 1.691244] pci 0000:02:00.0: xHCI HW did not halt within 2000 usec status = 0x0
[ 1.691311] Trying to unpack rootfs image as initramfs...
[ 3.455397] Freeing initrd memory: 68440k freed
[ 3.466688] Simple Boot Flag at 0x44 set to 0x1
[ 3.467248] Scanning for low memory corruption every 60 seconds
[ 3.467374] audit: initializing netlink socket (disabled)
[ 3.467386] type=2000 audit(1267137905.280:1): initialized
[ 3.479762] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.481276] VFS: Disk quotas dquot_6.5.2
[ 3.481333] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.481968] fuse init (API version 7.13)
[ 3.482052] msgmni has been set to 15990
[ 3.482337] alg: No test for stdrng (krng)
[ 3.482348] io scheduler noop registered
[ 3.482351] io scheduler anticipatory registered
[ 3.482353] io scheduler deadline registered
[ 3.482400] io scheduler cfq registered (default)
[ 3.482535] alloc irq_desc for 29 on node -1
[ 3.482538] alloc kstat_irqs on node -1
[ 3.482546] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
[ 3.482553] pcieport 0000:00:03.0: setting latency timer to 64
[ 3.482655] alloc irq_desc for 30 on node -1
[ 3.482657] alloc kstat_irqs on node -1
[ 3.482663] pcieport 0000:00:05.0: irq 30 for MSI/MSI-X
[ 3.482669] pcieport 0000:00:05.0: setting latency timer to 64
[ 3.482774] alloc irq_desc for 31 on node -1
[ 3.482776] alloc kstat_irqs on node -1
[ 3.482788] pcieport 0000:00:1c.0: irq 31 for MSI/MSI-X
[ 3.482800] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.482919] alloc irq_desc for 32 on node -1
[ 3.482921] alloc kstat_irqs on node -1
[ 3.482932] pcieport 0000:00:1c.1: irq 32 for MSI/MSI-X
[ 3.482945] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.483180] _OSC invalid UUID
[ 3.483183] aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed
[ 3.483305] _OSC invalid UUID
[ 3.483307] aer 0000:00:05.0:pcie02: AER service couldn't init device: _OSC failed
[ 3.483318] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.483450] _OSC invalid UUID
[ 3.483611] _OSC invalid UUID
[ 3.483785] _OSC invalid UUID
[ 3.483944] _OSC invalid UUID
[ 3.483987] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.484498] ACPI: AC Adapter [ACAD] (on-line)
[ 3.484580] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.484583] ACPI: Power Button [PWRB]
[ 3.484623] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.484990] ACPI: Lid Switch [LID0]
[ 3.485053] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.485056] ACPI: Power Button [PWRF]
[ 3.486609] ACPI: SSDT 00000000bf691a98 002DA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 3.487331] ACPI: SSDT 00000000bf690618 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 3.488062] Monitor-Mwait will be used to enter C-1 state
[ 3.488084] Monitor-Mwait will be used to enter C-2 state
[ 3.488121] processor LNXCPU:00: registered as cooling_device0
[ 3.488774] ACPI: SSDT 00000000bf691718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 3.489461] ACPI: SSDT 00000000bf68fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 3.490364] processor LNXCPU:01: registered as cooling_device1
[ 3.491457] processor LNXCPU:02: registered as cooling_device2
[ 3.492542] processor LNXCPU:03: registered as cooling_device3
[ 3.493606] processor LNXCPU:04: registered as cooling_device4
[ 3.494711] processor LNXCPU:05: registered as cooling_device5
[ 3.495798] processor LNXCPU:06: registered as cooling_device6
[ 3.496897] processor LNXCPU:07: registered as cooling_device7
[ 3.505333] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.505341] ACPI: Thermal Zone [TZ01] (61 C)
[ 3.506909] Linux agpgart interface v0.103
[ 3.506913] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.508392] brd: module loaded
[ 3.508989] loop: module loaded
[ 3.509055] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 3.509178] ahci 0000:00:1f.2: version 3.0
[ 3.509196] alloc irq_desc for 19 on node -1
[ 3.509198] alloc kstat_irqs on node -1
[ 3.509237] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.509274] alloc irq_desc for 33 on node -1
[ 3.509276] alloc kstat_irqs on node -1
[ 3.509288] ahci 0000:00:1f.2: irq 33 for MSI/MSI-X
[ 3.509355] ahci: SSS flag set, parallel bus scan disabled
[ 3.509393] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl RAID mode
[ 3.509397] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 3.509406] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.512416] ACPI: Battery Slot [BAT0] (battery present)
[ 3.512789] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.546576] scsi0 : ahci
[ 3.546650] scsi1 : ahci
[ 3.546701] scsi2 : ahci
[ 3.546747] scsi3 : ahci
[ 3.546791] scsi4 : ahci
[ 3.546837] scsi5 : ahci
[ 3.547076] ata1: SATA max UDMA/133 abar m2048@0xd4205000 port 0xd4205100 irq 33
[ 3.547084] ata2: SATA max UDMA/133 abar m2048@0xd4205000 port 0xd4205180 irq 33
[ 3.547087] ata3: DUMMY
[ 3.547088] ata4: DUMMY
[ 3.547089] ata5: DUMMY
[ 3.547095] ata6: SATA max UDMA/133 abar m2048@0xd4205000 port 0xd4205380 irq 33
[ 3.547914] Fixed MDIO Bus: probed
[ 3.547950] PPP generic driver version 2.4.2
[ 3.548023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.548026] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 3.548051] alloc irq_desc for 20 on node -1
[ 3.548053] alloc kstat_irqs on node -1
[ 3.548058] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.548074] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.548082] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.548096] drivers/usb/core/inode.c: creating file 'devices'
[ 3.548104] drivers/usb/core/inode.c: creating file '001'
[ 3.548127] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.548140] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 3.548148] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 3.548182] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.548192] ehci_hcd 0000:00:1d.0: reset command 080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 3.552088] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 3.552090] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 3.552106] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd4205800
[ 3.552115] ehci_hcd 0000:00:1d.0: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.556003] ehci_hcd 0000:00:1d.0: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 3.576461] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.576505] usb usb1: default language 0x0409
[ 3.576517] usb usb1: udev 1, busnum 1, minor = 0
[ 3.576521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.576526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.576532] usb usb1: Product: EHCI Host Controller
[ 3.576534] usb usb1: Manufacturer: Linux 2.6.32.8-usb-debug ehci_hcd
[ 3.576536] usb usb1: SerialNumber: 0000:00:1d.0
[ 3.576573] usb usb1: uevent
[ 3.576584] usb usb1: usb_probe_device
[ 3.576586] usb usb1: configuration #1 chosen from 1 choice
[ 3.576593] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.576606] usb 1-0:1.0: uevent
[ 3.576616] hub 1-0:1.0: usb_probe_interface
[ 3.576618] hub 1-0:1.0: usb_probe_interface - got id
[ 3.576620] hub 1-0:1.0: USB hub found
[ 3.576626] hub 1-0:1.0: 2 ports detected
[ 3.576628] hub 1-0:1.0: standalone hub
[ 3.576630] hub 1-0:1.0: no power switching (usb 1.0)
[ 3.576632] hub 1-0:1.0: individual port over-current protection
[ 3.576634] hub 1-0:1.0: power on to power good time: 20ms
[ 3.576638] hub 1-0:1.0: local power source is good
[ 3.576640] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 3.576668] drivers/usb/core/inode.c: creating file '001'
[ 3.576700] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.576703] ohci_hcd: block sizes: ed 80 td 96
[ 3.576719] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.576810] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.590044] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.590050] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.590105] mice: PS/2 mouse device common for all mice
[ 3.590193] rtc_cmos 00:06: RTC can wake from S4
[ 3.590222] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.590261] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.590386] device-mapper: uevent: version 1.0.3
[ 3.591411] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.591533] device-mapper: multipath: version 1.1.0 loaded
[ 3.591536] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.592029] cpuidle: using governor ladder
[ 3.592304] cpuidle: using governor menu
[ 3.592703] TCP cubic registered
[ 3.592833] NET: Registered protocol family 10
[ 3.593314] lo: Disabled Privacy Extensions
[ 3.593622] NET: Registered protocol family 17
[ 3.593637] Bluetooth: L2CAP ver 2.14
[ 3.593639] Bluetooth: L2CAP socket layer initialized
[ 3.593642] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.593643] Bluetooth: SCO socket layer initialized
[ 3.593663] Bluetooth: RFCOMM TTY layer initialized
[ 3.593665] Bluetooth: RFCOMM socket layer initialized
[ 3.593667] Bluetooth: RFCOMM ver 1.11
[ 3.593697] ------------[ cut here ]------------
[ 3.593703] WARNING: at arch/x86/kernel/hpet.c:392 hpet_next_event+0x75/0x90()
[ 3.593705] Hardware name: HP ENVY 15 Notebook PC
[ 3.593707] Modules linked in:
[ 3.593710] Pid: 0, comm: swapper Not tainted 2.6.32.8-usb-debug #1
[ 3.593712] Call Trace:
[ 3.593717] [<ffffffff810601c8>] warn_slowpath_common+0x78/0xb0
[ 3.593721] [<ffffffff8106020f>] warn_slowpath_null+0xf/0x20
[ 3.593724] [<ffffffff810344a5>] hpet_next_event+0x75/0x90
[ 3.593727] [<ffffffff810344eb>] hpet_legacy_next_event+0xb/0x10
[ 3.593732] [<ffffffff8108a9cf>] clockevents_program_event+0x4f/0x90
[ 3.593736] [<ffffffff8108bdf0>] tick_dev_program_event+0x40/0xd0
[ 3.593739] [<ffffffff8108b796>] tick_broadcast_oneshot_control+0x116/0x120
[ 3.593743] [<ffffffff8108b015>] tick_notify+0x335/0x410
[ 3.593747] [<ffffffff81036449>] ? default_spin_lock_flags+0x9/0x10
[ 3.593807] [<ffffffff81543bb7>] notifier_call_chain+0x47/0x90
[ 3.593812] [<ffffffff810824f1>] raw_notifier_call_chain+0x11/0x20
[ 3.593815] [<ffffffff8108a802>] clockevents_notify+0x32/0x150
[ 3.593820] [<ffffffff812e93a9>] lapic_timer_state_broadcast+0x41/0x43
[ 3.593824] [<ffffffff812e9abe>] acpi_idle_enter_simple+0x91/0x13b
[ 3.593828] [<ffffffff8141dad5>] ? menu_select+0x105/0x2b0
[ 3.593833] [<ffffffff8141cabf>] cpuidle_idle_call+0x9f/0x130
[ 3.593837] [<ffffffff81010e4b>] cpu_idle+0xab/0x100
[ 3.593841] [<ffffffff8153a7e3>] start_secondary+0x18d/0x192
[ 3.593847] ---[ end trace 27507780c8f5b248 ]---
[ 3.597137] PM: Resume from disk failed.
[ 3.597143] registered taskstats version 1
[ 3.597645] Magic number: 14:424:806
[ 3.597788] rtc_cmos 00:06: setting system clock to 2010-02-25 22:45:06 UTC (1267137906)
[ 3.597795] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.597797] EDD information not available.
[ 3.611872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.676451] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[ 3.676461] hub 1-0:1.0: port 1: status 0501 change 0001
[ 3.774531] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 3.774548] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 3.834774] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 3.834777] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 3.894382] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.894395] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.894743] ata1.00: ATA-7: INTEL SSDSA1M160G2HP, 2CV102HA, max UDMA/100
[ 3.894746] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.895431] ata1.00: configured for UDMA/100
[ 3.914471] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA1M160 2CV1 PQ: 0 ANSI: 5
[ 3.914560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.914706] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.914741] sd 0:0:0:0: [sda] Write Protect is off
[ 3.914742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.914755] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.914823] sda: sda1 sda2 sda3 sda4
[ 3.915572] sda: p2 size 408211650 exceeds device capacity, limited to end of disk
[ 3.915614] sda: p3 ignored, start 453065130 is behind the end of the disk
[ 3.915616] sda: p4 ignored, start 441803565 is behind the end of the disk
[ 3.915785] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.954533] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 3.954536] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 4.046391] usb 1-1: udev 2, busnum 1, minor = 1
[ 4.046396] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.046401] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.046471] usb 1-1: uevent
[ 4.046491] usb 1-1: usb_probe_device
[ 4.046496] usb 1-1: configuration #1 chosen from 1 choice
[ 4.046621] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 4.046650] usb 1-1:1.0: uevent
[ 4.046671] hub 1-1:1.0: usb_probe_interface
[ 4.046675] hub 1-1:1.0: usb_probe_interface - got id
[ 4.046679] hub 1-1:1.0: USB hub found
[ 4.046882] hub 1-1:1.0: 8 ports detected
[ 4.046886] hub 1-1:1.0: standalone hub
[ 4.046889] hub 1-1:1.0: individual port power switching
[ 4.046892] hub 1-1:1.0: individual port over-current protection
[ 4.046896] hub 1-1:1.0: Single TT
[ 4.046900] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 4.046903] hub 1-1:1.0: Port indicators are supported
[ 4.046907] hub 1-1:1.0: power on to power good time: 100ms
[ 4.047255] hub 1-1:1.0: local power source is good
[ 4.047261] hub 1-1:1.0: enabling power on all ports
[ 4.048283] drivers/usb/core/inode.c: creating file '002'
[ 4.144787] hub 1-1:1.0: port 5: status 0101 change 0001
[ 4.145044] hub 1-1:1.0: port 6: status 0101 change 0001
[ 4.243973] usb 1-1: link qh256-0001/ffff880227ceee80 start 1 [1/0 us]
[ 4.243993] hub 1-1:1.0: state 7 ports 8 chg 0060 evt 0000
[ 4.244248] hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[ 4.324182] usb 1-1.5: new high speed USB device using ehci_hcd and address 3
[ 4.438448] usb 1-1.5: skipped 1 descriptor after configuration
[ 4.438454] usb 1-1.5: skipped 5 descriptors after interface
[ 4.438460] usb 1-1.5: skipped 1 descriptor after endpoint
[ 4.438465] usb 1-1.5: skipped 8 descriptors after interface
[ 4.438693] usb 1-1.5: default language 0x0409
[ 4.439817] usb 1-1.5: udev 3, busnum 1, minor = 2
[ 4.439823] usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b16c
[ 4.439828] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.439833] usb 1-1.5: Product: HP Webcam
[ 4.439837] usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 4.439911] usb 1-1.5: uevent
[ 4.439931] usb 1-1.5: usb_probe_device
[ 4.439936] usb 1-1.5: configuration #1 chosen from 1 choice
[ 4.440208] usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0)
[ 4.440699] usb 1-1.5:1.0: uevent
[ 4.440741] usb 1-1.5: adding 1-1.5:1.1 (config #1, interface 1)
[ 4.440777] usb 1-1.5:1.1: uevent
[ 4.440795] drivers/usb/core/inode.c: creating file '003'
[ 4.441077] hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
[ 4.513863] usb 1-1.6: new full speed USB device using ehci_hcd and address 4
[ 4.628529] usb 1-1.6: skipped 1 descriptor after interface
[ 4.628887] usb 1-1.6: default language 0x0409
[ 4.629638] usb 1-1.6: udev 4, busnum 1, minor = 3
[ 4.629644] usb 1-1.6: New USB device found, idVendor=03f0, idProduct=231d
[ 4.629650] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.629655] usb 1-1.6: Product: HP Integrated Module
[ 4.629658] usb 1-1.6: Manufacturer: Broadcom Corp
[ 4.629733] usb 1-1.6: uevent
[ 4.629753] usb 1-1.6: usb_probe_device
[ 4.629758] usb 1-1.6: configuration #1 chosen from 1 choice
[ 4.630024] usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0)
[ 4.630058] usb 1-1.6:1.0: uevent
[ 4.630130] usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1)
[ 4.630151] usb 1-1.6:1.1: uevent
[ 4.630166] usb 1-1.6: adding 1-1.6:1.2 (config #1, interface 2)
[ 4.630175] usb 1-1.6:1.2: uevent
[ 4.630189] usb 1-1.6: adding 1-1.6:1.3 (config #1, interface 3)
[ 4.630197] usb 1-1.6:1.3: uevent
[ 4.630202] drivers/usb/core/inode.c: creating file '004'
[ 4.630213] hub 1-1:1.0: state 7 ports 8 chg 0000 evt 0040
[ 4.663562] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.663919] ata2.00: ATA-7: INTEL SSDSA1M160G2HP, 2CV102HA, max UDMA/100
[ 4.663927] ata2.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.664628] ata2.00: configured for UDMA/100
[ 4.683569] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA1M160 2CV1 PQ: 0 ANSI: 5
[ 4.683657] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.683661] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.683733] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.683736] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.683765] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.683839] sdb: unknown partition table
[ 4.685085] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.033129] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.053290] Freeing unused kernel memory: 692k freed
[ 5.053398] Write protecting the kernel read-only data: 7732k
[ 5.121902] usb usb1: uevent
[ 5.121920] usb 1-0:1.0: uevent
[ 5.121949] usb 1-1: uevent
[ 5.121975] usb 1-1.5: uevent
[ 5.122000] usb 1-1.5:1.0: uevent
[ 5.122021] usb 1-1.5:1.1: uevent
[ 5.122040] usb 1-1.6: uevent
[ 5.122064] usb 1-1.6:1.0: uevent
[ 5.122089] usb 1-1.6:1.1: uevent
[ 5.122114] usb 1-1.6:1.2: uevent
[ 5.122140] usb 1-1.6:1.3: uevent
[ 5.122166] usb 1-1:1.0: uevent
[ 5.132844] usb usb1: uevent
[ 5.149090] usb 1-1: uevent
[ 5.155922] usb 1-1.5: uevent
[ 5.155995] usb 1-1.6: uevent
[ 5.163862] acpi device:23: registered as cooling_device8
[ 5.178952] acpi device:25: registered as cooling_device9
[ 5.179102] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/LNXVIDEO:01/input/input5
[ 5.179132] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 6.775462] PM: Starting manual resume from disk
[ 6.775465] PM: Resume from partition 252:2
[ 6.775466] PM: Checking hibernation image.
[ 6.775652] PM: Error -22 checking image file
[ 6.775654] PM: Resume from disk failed.
[ 6.790646] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 6.961771] Adding 16795916k swap on /dev/mapper/isw_cdfcbdcfed_RAID-01. Priority:-1 extents:1 across:16795916k
[ 7.010004] udev: starting version 147
[ 7.026844] usb usb1: uevent
[ 7.026871] usb 1-0:1.0: uevent
[ 7.026902] usb 1-1: uevent
[ 7.026930] usb 1-1.5: uevent
[ 7.026957] usb 1-1.5:1.0: uevent
[ 7.026985] usb 1-1.5:1.1: uevent
[ 7.027016] usb 1-1.6: uevent
[ 7.027043] usb 1-1.6:1.0: uevent
[ 7.027071] usb 1-1.6:1.1: uevent
[ 7.027098] usb 1-1.6:1.2: uevent
[ 7.027125] usb 1-1.6:1.3: uevent
[ 7.027151] usb 1-1:1.0: uevent
[ 7.035923] usb usb1: uevent
[ 7.046779] usb 1-1: uevent
[ 7.054996] usb 1-1.5: uevent
[ 7.059805] usb 1-1.6: uevent
[ 7.092567] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.092573] Disabling lock debugging due to kernel taint
[ 7.201187] [fglrx] Maximum main memory to use for locked dma buffers: 7762 MBytes.
[ 7.201520] [fglrx] vendor: 1002 device: 68a1 count: 1
[ 7.202093] [fglrx] ioport: bar 4, base 0x4000, size: 0x100
[ 7.202131] pci 0000:01:00.0: power state changed by ACPI to D0
[ 7.202142] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.202149] pci 0000:01:00.0: setting latency timer to 64
[ 7.202379] [fglrx] Kernel PAT support is enabled
[ 7.202399] [fglrx] module loaded - fglrx 8.70.3 [Feb 2 2010] with 1 minors
[ 7.242181] cfg80211: Calling CRDA to update world regulatory domain
[ 7.253362] atl1c 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.253378] atl1c 0000:04:00.0: setting latency timer to 64
[ 7.259963] cfg80211: World regulatory domain updated:
[ 7.259966] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.259969] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.259972] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.259975] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.259978] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.259980] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.262099] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.262165] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 7.262169] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 7.262179] drivers/usb/core/inode.c: creating file '002'
[ 7.262233] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 7.262246] xhci_hcd 0000:02:00.0: xHCI capability registers at ffffc90011790000:
[ 7.262251] xhci_hcd 0000:02:00.0: CAPLENGTH AND HCIVERSION 0x960020:
[ 7.262254] xhci_hcd 0000:02:00.0: CAPLENGTH: 0x20
[ 7.262257] xhci_hcd 0000:02:00.0: HCIVERSION: 0x96
[ 7.262260] xhci_hcd 0000:02:00.0: HCSPARAMS 1: 0x4000820
[ 7.262263] xhci_hcd 0000:02:00.0: Max device slots: 32
[ 7.262266] xhci_hcd 0000:02:00.0: Max interrupters: 8
[ 7.262268] xhci_hcd 0000:02:00.0: Max ports: 4
[ 7.262272] xhci_hcd 0000:02:00.0: HCSPARAMS 2: 0x11
[ 7.262274] xhci_hcd 0000:02:00.0: Isoc scheduling threshold: 1
[ 7.262277] xhci_hcd 0000:02:00.0: Maximum allowed segments in event ring: 1
[ 7.262281] xhci_hcd 0000:02:00.0: HCSPARAMS 3 0x0:
[ 7.262283] xhci_hcd 0000:02:00.0: Worst case U1 device exit latency: 0
[ 7.262285] xhci_hcd 0000:02:00.0: Worst case U2 device exit latency: 0
[ 7.262288] xhci_hcd 0000:02:00.0: HCC PARAMS 0x14042cb:
[ 7.262290] xhci_hcd 0000:02:00.0: HC generates 64 bit addresses
[ 7.262292] xhci_hcd 0000:02:00.0: FIXME: more HCCPARAMS debugging
[ 7.262295] xhci_hcd 0000:02:00.0: RTSOFF 0x600:
[ 7.262297] xhci_hcd 0000:02:00.0: xHCI operational registers at ffffc90011790020:
[ 7.262301] xhci_hcd 0000:02:00.0: USBCMD 0x0:
[ 7.262303] xhci_hcd 0000:02:00.0: HC is being stopped
[ 7.262304] xhci_hcd 0000:02:00.0: HC has finished hard reset
[ 7.262307] xhci_hcd 0000:02:00.0: Event Interrupts disabled
[ 7.262309] xhci_hcd 0000:02:00.0: Host System Error Interrupts disabled
[ 7.262311] xhci_hcd 0000:02:00.0: HC has finished light reset
[ 7.262314] xhci_hcd 0000:02:00.0: USBSTS 0x1:
[ 7.262316] xhci_hcd 0000:02:00.0: Event ring is empty
[ 7.262318] xhci_hcd 0000:02:00.0: No Host System Error
[ 7.262320] xhci_hcd 0000:02:00.0: HC is halted
[ 7.262323] xhci_hcd 0000:02:00.0: ffffc90011790420 port status reg = 0x2a0
[ 7.262327] xhci_hcd 0000:02:00.0: ffffc90011790424 port power reg = 0x0
[ 7.262330] xhci_hcd 0000:02:00.0: ffffc90011790428 port link reg = 0x0
[ 7.262334] xhci_hcd 0000:02:00.0: ffffc9001179042c port reserved reg = 0x0
[ 7.262337] xhci_hcd 0000:02:00.0: ffffc90011790430 port status reg = 0x2a0
[ 7.262341] xhci_hcd 0000:02:00.0: ffffc90011790434 port power reg = 0x0
[ 7.262344] xhci_hcd 0000:02:00.0: ffffc90011790438 port link reg = 0x0
[ 7.262348] xhci_hcd 0000:02:00.0: ffffc9001179043c port reserved reg = 0x0
[ 7.262351] xhci_hcd 0000:02:00.0: ffffc90011790440 port status reg = 0x2a0
[ 7.262354] xhci_hcd 0000:02:00.0: ffffc90011790444 port power reg = 0x0
[ 7.262358] xhci_hcd 0000:02:00.0: ffffc90011790448 port link reg = 0x0
[ 7.262361] xhci_hcd 0000:02:00.0: ffffc9001179044c port reserved reg = 0x0
[ 7.262364] xhci_hcd 0000:02:00.0: ffffc90011790450 port status reg = 0x2a0
[ 7.262368] xhci_hcd 0000:02:00.0: ffffc90011790454 port power reg = 0x0
[ 7.262371] xhci_hcd 0000:02:00.0: ffffc90011790458 port link reg = 0x0
[ 7.262374] xhci_hcd 0000:02:00.0: ffffc9001179045c port reserved reg = 0x0
[ 7.262376] xhci_hcd 0000:02:00.0: // Halt the HC
[ 7.262380] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790020, 32'h0, 4'hf);
[ 7.262384] xhci_hcd 0000:02:00.0: Resetting HCD
[ 7.262387] xhci_hcd 0000:02:00.0: // Reset the HC
[ 7.262390] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790020, 32'h2, 4'hf);
[ 7.262432] xhci_hcd 0000:02:00.0: Reset complete
[ 7.262434] xhci_hcd 0000:02:00.0: Calling HCD init
[ 7.262436] xhci_hcd 0000:02:00.0: xhci_init
[ 7.262438] xhci_hcd 0000:02:00.0: xHCI doesn't need link TRB QUIRK
[ 7.262441] xhci_hcd 0000:02:00.0: Supported page size register = 0x1
[ 7.262443] xhci_hcd 0000:02:00.0: Supported page size of 4K
[ 7.262445] xhci_hcd 0000:02:00.0: HCD page size set to 4K
[ 7.262448] xhci_hcd 0000:02:00.0: // xHC can handle at most 32 device slots.
[ 7.262451] xhci_hcd 0000:02:00.0: // Setting Max device slots reg = 0x20.
[ 7.262454] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790058, 32'h20, 4'hf);
[ 7.262487] xhci_hcd 0000:02:00.0: // Device context base array address = 0x37804000 (DMA), ffff880037804000 (virt)
[ 7.262493] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc90011790050, 64'h37804000, 4'hf);
[ 7.262500] xhci_hcd 0000:02:00.0: Allocating ring at ffff8802279fc480
[ 7.262505] xhci_hcd 0000:02:00.0: Allocating priv segment structure at ffff8802327cc7c0
[ 7.262534] xhci_hcd 0000:02:00.0: // Allocating segment at ffff880037805000 (virtual) 0x37805000 (DMA)
[ 7.262541] xhci_hcd 0000:02:00.0: Linking segment 0x37805000 to segment 0x37805000 (DMA)
[ 7.262546] xhci_hcd 0000:02:00.0: Wrote link toggle flag to segment ffff8802327cc7c0 (virtual), 0x37805000 (DMA)
[ 7.262552] xhci_hcd 0000:02:00.0: Allocated command ring at ffff8802279fc480
[ 7.262564] xhci_hcd 0000:02:00.0: First segment DMA is 0x37805000
[ 7.262570] xhci_hcd 0000:02:00.0: // Setting command ring address to 0x20
[ 7.262575] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc90011790038, 64'h37805001, 4'hf);
[ 7.262583] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr low bits + flags = @00000000
[ 7.262588] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr high bits = @00000000
[ 7.262594] xhci_hcd 0000:02:00.0: // Doorbell array is located at offset 0x800 from cap regs base addr
[ 7.262600] xhci_hcd 0000:02:00.0: // xHCI capability registers at ffffc90011790000:
[ 7.262628] xhci_hcd 0000:02:00.0: // @ffffc90011790000 = 0x960020 (CAPLENGTH AND HCIVERSION)
[ 7.262632] xhci_hcd 0000:02:00.0: // CAPLENGTH: 0x20
[ 7.262636] xhci_hcd 0000:02:00.0: // xHCI operational registers at ffffc90011790020:
[ 7.262642] xhci_hcd 0000:02:00.0: // @ffffc90011790018 = 0x600 RTSOFF
[ 7.262646] xhci_hcd 0000:02:00.0: // xHCI runtime registers at ffffc90011790600:
[ 7.262652] xhci_hcd 0000:02:00.0: // @ffffc90011790014 = 0x800 DBOFF
[ 7.262656] xhci_hcd 0000:02:00.0: // Doorbell array at ffffc90011790800:
[ 7.262660] xhci_hcd 0000:02:00.0: xHCI runtime registers at ffffc90011790600:
[ 7.262679] xhci_hcd 0000:02:00.0: ffffc90011790600: Microframe index = 0x0
[ 7.262690] xhci_hcd 0000:02:00.0: // Allocating event ring
[ 7.262694] xhci_hcd 0000:02:00.0: Allocating ring at ffff8802279fcb40
[ 7.262698] xhci_hcd 0000:02:00.0: Allocating priv segment structure at ffff8802327cc7e0
[ 7.262704] xhci_hcd 0000:02:00.0: // Allocating segment at ffff880037805400 (virtual) 0x37805400 (DMA)
[ 7.262710] xhci_hcd 0000:02:00.0: Linking segment 0x37805400 to segment 0x37805400 (DMA)
[ 7.262716] xhci_hcd 0000:02:00.0: // Allocated event ring segment table at 0x37806000
[ 7.262721] xhci_hcd 0000:02:00.0: Set ERST to 0; private num segs = 1, virt addr = ffff880037806000, dma addr = 0x37806000
[ 7.262728] xhci_hcd 0000:02:00.0: // Write ERST size = 1 to ir_set 0 (some bits preserved)
[ 7.262733] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790628, 32'h1, 4'hf);
[ 7.262738] xhci_hcd 0000:02:00.0: // Set ERST entries to point to event ring.
[ 7.262743] xhci_hcd 0000:02:00.0: // Set ERST base address for ir_set 0 = 0x37806000
[ 7.262750] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc90011790630, 64'h37806000, 4'hf);
[ 7.262758] xhci_hcd 0000:02:00.0: // Write event ring dequeue pointer, preserving EHB bit
[ 7.262763] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc90011790638, 64'h37805400, 4'hf);
[ 7.262769] xhci_hcd 0000:02:00.0: Wrote ERST address to ir_set 0.
[ 7.262786] xhci_hcd 0000:02:00.0: Allocating 0 scratchpad buffers
[ 7.262789] xhci_hcd 0000:02:00.0: Finished xhci_init
[ 7.262793] xhci_hcd 0000:02:00.0: Called HCD init
[ 7.262830] xhci_hcd 0000:02:00.0: Got SBRN 48
[ 7.262837] xhci_hcd 0000:02:00.0: MWI active
[ 7.262840] xhci_hcd 0000:02:00.0: Finished xhci_pci_reinit
[ 7.262845] xhci_hcd 0000:02:00.0: supports USB remote wakeup
[ 7.262862] xhci_hcd 0000:02:00.0: irq 16, io mem 0xd4000000
[ 7.262866] xhci_hcd 0000:02:00.0: xhci_run
[ 7.262869] xhci_hcd 0000:02:00.0: Setting event ring polling timer
[ 7.262889] xhci_hcd 0000:02:00.0: Command ring memory map follows:
[ 7.262894] xhci_hcd 0000:02:00.0: @37805000 00000000 00000000 00000000 00000000
[ 7.262899] xhci_hcd 0000:02:00.0: @37805010 00000000 00000000 00000000 00000000
[ 7.262904] xhci_hcd 0000:02:00.0: @37805020 00000000 00000000 00000000 00000000
[ 7.262909] xhci_hcd 0000:02:00.0: @37805030 00000000 00000000 00000000 00000000
[ 7.262913] xhci_hcd 0000:02:00.0: @37805040 00000000 00000000 00000000 00000000
[ 7.262918] xhci_hcd 0000:02:00.0: @37805050 00000000 00000000 00000000 00000000
[ 7.262922] xhci_hcd 0000:02:00.0: @37805060 00000000 00000000 00000000 00000000
[ 7.262927] xhci_hcd 0000:02:00.0: @37805070 00000000 00000000 00000000 00000000
[ 7.262932] xhci_hcd 0000:02:00.0: @37805080 00000000 00000000 00000000 00000000
[ 7.262953] xhci_hcd 0000:02:00.0: @37805090 00000000 00000000 00000000 00000000
[ 7.262958] xhci_hcd 0000:02:00.0: @378050a0 00000000 00000000 00000000 00000000
[ 7.262963] xhci_hcd 0000:02:00.0: @378050b0 00000000 00000000 00000000 00000000
[ 7.262967] xhci_hcd 0000:02:00.0: @378050c0 00000000 00000000 00000000 00000000
[ 7.262971] xhci_hcd 0000:02:00.0: @378050d0 00000000 00000000 00000000 00000000
[ 7.262976] xhci_hcd 0000:02:00.0: @378050e0 00000000 00000000 00000000 00000000
[ 7.262981] xhci_hcd 0000:02:00.0: @378050f0 00000000 00000000 00000000 00000000
[ 7.262986] xhci_hcd 0000:02:00.0: @37805100 00000000 00000000 00000000 00000000
[ 7.262990] xhci_hcd 0000:02:00.0: @37805110 00000000 00000000 00000000 00000000
[ 7.262994] xhci_hcd 0000:02:00.0: @37805120 00000000 00000000 00000000 00000000
[ 7.263000] xhci_hcd 0000:02:00.0: @37805130 00000000 00000000 00000000 00000000
[ 7.263005] xhci_hcd 0000:02:00.0: @37805140 00000000 00000000 00000000 00000000
[ 7.263009] xhci_hcd 0000:02:00.0: @37805150 00000000 00000000 00000000 00000000
[ 7.263014] xhci_hcd 0000:02:00.0: @37805160 00000000 00000000 00000000 00000000
[ 7.263019] xhci_hcd 0000:02:00.0: @37805170 00000000 00000000 00000000 00000000
[ 7.263023] xhci_hcd 0000:02:00.0: @37805180 00000000 00000000 00000000 00000000
[ 7.263028] xhci_hcd 0000:02:00.0: @37805190 00000000 00000000 00000000 00000000
[ 7.263032] xhci_hcd 0000:02:00.0: @378051a0 00000000 00000000 00000000 00000000
[ 7.263037] xhci_hcd 0000:02:00.0: @378051b0 00000000 00000000 00000000 00000000
[ 7.263041] xhci_hcd 0000:02:00.0: @378051c0 00000000 00000000 00000000 00000000
[ 7.263046] xhci_hcd 0000:02:00.0: @378051d0 00000000 00000000 00000000 00000000
[ 7.263051] xhci_hcd 0000:02:00.0: @378051e0 00000000 00000000 00000000 00000000
[ 7.263056] xhci_hcd 0000:02:00.0: @378051f0 00000000 00000000 00000000 00000000
[ 7.263060] xhci_hcd 0000:02:00.0: @37805200 00000000 00000000 00000000 00000000
[ 7.263065] xhci_hcd 0000:02:00.0: @37805210 00000000 00000000 00000000 00000000
[ 7.263069] xhci_hcd 0000:02:00.0: @37805220 00000000 00000000 00000000 00000000
[ 7.263075] xhci_hcd 0000:02:00.0: @37805230 00000000 00000000 00000000 00000000
[ 7.263080] xhci_hcd 0000:02:00.0: @37805240 00000000 00000000 00000000 00000000
[ 7.263084] xhci_hcd 0000:02:00.0: @37805250 00000000 00000000 00000000 00000000
[ 7.263090] xhci_hcd 0000:02:00.0: @37805260 00000000 00000000 00000000 00000000
[ 7.263094] xhci_hcd 0000:02:00.0: @37805270 00000000 00000000 00000000 00000000
[ 7.263099] xhci_hcd 0000:02:00.0: @37805280 00000000 00000000 00000000 00000000
[ 7.263104] xhci_hcd 0000:02:00.0: @37805290 00000000 00000000 00000000 00000000
[ 7.263109] xhci_hcd 0000:02:00.0: @378052a0 00000000 00000000 00000000 00000000
[ 7.263113] xhci_hcd 0000:02:00.0: @378052b0 00000000 00000000 00000000 00000000
[ 7.263118] xhci_hcd 0000:02:00.0: @378052c0 00000000 00000000 00000000 00000000
[ 7.263123] xhci_hcd 0000:02:00.0: @378052d0 00000000 00000000 00000000 00000000
[ 7.263129] xhci_hcd 0000:02:00.0: @378052e0 00000000 00000000 00000000 00000000
[ 7.263133] xhci_hcd 0000:02:00.0: @378052f0 00000000 00000000 00000000 00000000
[ 7.263138] xhci_hcd 0000:02:00.0: @37805300 00000000 00000000 00000000 00000000
[ 7.263143] xhci_hcd 0000:02:00.0: @37805310 00000000 00000000 00000000 00000000
[ 7.263148] xhci_hcd 0000:02:00.0: @37805320 00000000 00000000 00000000 00000000
[ 7.263153] xhci_hcd 0000:02:00.0: @37805330 00000000 00000000 00000000 00000000
[ 7.263158] xhci_hcd 0000:02:00.0: @37805340 00000000 00000000 00000000 00000000
[ 7.263163] xhci_hcd 0000:02:00.0: @37805350 00000000 00000000 00000000 00000000
[ 7.263168] xhci_hcd 0000:02:00.0: @37805360 00000000 00000000 00000000 00000000
[ 7.263172] xhci_hcd 0000:02:00.0: @37805370 00000000 00000000 00000000 00000000
[ 7.263177] xhci_hcd 0000:02:00.0: @37805380 00000000 00000000 00000000 00000000
[ 7.263182] xhci_hcd 0000:02:00.0: @37805390 00000000 00000000 00000000 00000000
[ 7.263187] xhci_hcd 0000:02:00.0: @378053a0 00000000 00000000 00000000 00000000
[ 7.263191] xhci_hcd 0000:02:00.0: @378053b0 00000000 00000000 00000000 00000000
[ 7.263196] xhci_hcd 0000:02:00.0: @378053c0 00000000 00000000 00000000 00000000
[ 7.263201] xhci_hcd 0000:02:00.0: @378053d0 00000000 00000000 00000000 00000000
[ 7.263205] xhci_hcd 0000:02:00.0: @378053e0 00000000 00000000 00000000 00000000
[ 7.263210] xhci_hcd 0000:02:00.0: @378053f0 37805000 00000000 00000000 00001802
[ 7.263215] xhci_hcd 0000:02:00.0: Ring has not been updated
[ 7.263220] xhci_hcd 0000:02:00.0: Ring deq = ffff880037805000 (virt), 0x37805000 (dma)
[ 7.263224] xhci_hcd 0000:02:00.0: Ring deq updated 0 times
[ 7.263228] xhci_hcd 0000:02:00.0: Ring enq = ffff880037805000 (virt), 0x37805000 (dma)
[ 7.263233] xhci_hcd 0000:02:00.0: Ring enq updated 0 times
[ 7.263238] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr low bits + flags = @00000000
[ 7.263243] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr high bits = @00000000
[ 7.263247] xhci_hcd 0000:02:00.0: ERST memory map follows:
[ 7.263251] xhci_hcd 0000:02:00.0: @37806000 37805400 00000000 00000040 00000000
[ 7.263256] xhci_hcd 0000:02:00.0: Event ring:
[ 7.263259] xhci_hcd 0000:02:00.0: @37805400 00000000 00000000 00000000 00000000
[ 7.263304] xhci_hcd 0000:02:00.0: @37805410 00000000 00000000 00000000 00000000
[ 7.263309] xhci_hcd 0000:02:00.0: @37805420 00000000 00000000 00000000 00000000
[ 7.263314] xhci_hcd 0000:02:00.0: @37805430 00000000 00000000 00000000 00000000
[ 7.263319] xhci_hcd 0000:02:00.0: @37805440 00000000 00000000 00000000 00000000
[ 7.263323] xhci_hcd 0000:02:00.0: @37805450 00000000 00000000 00000000 00000000
[ 7.263329] xhci_hcd 0000:02:00.0: @37805460 00000000 00000000 00000000 00000000
[ 7.263333] xhci_hcd 0000:02:00.0: @37805470 00000000 00000000 00000000 00000000
[ 7.263339] xhci_hcd 0000:02:00.0: @37805480 00000000 00000000 00000000 00000000
[ 7.263344] xhci_hcd 0000:02:00.0: @37805490 00000000 00000000 00000000 00000000
[ 7.263349] xhci_hcd 0000:02:00.0: @378054a0 00000000 00000000 00000000 00000000
[ 7.263354] xhci_hcd 0000:02:00.0: @378054b0 00000000 00000000 00000000 00000000
[ 7.263359] xhci_hcd 0000:02:00.0: @378054c0 00000000 00000000 00000000 00000000
[ 7.263364] xhci_hcd 0000:02:00.0: @378054d0 00000000 00000000 00000000 00000000
[ 7.263369] xhci_hcd 0000:02:00.0: @378054e0 00000000 00000000 00000000 00000000
[ 7.263374] xhci_hcd 0000:02:00.0: @378054f0 00000000 00000000 00000000 00000000
[ 7.263379] xhci_hcd 0000:02:00.0: @37805500 00000000 00000000 00000000 00000000
[ 7.263384] xhci_hcd 0000:02:00.0: @37805510 00000000 00000000 00000000 00000000
[ 7.263389] xhci_hcd 0000:02:00.0: @37805520 00000000 00000000 00000000 00000000
[ 7.263394] xhci_hcd 0000:02:00.0: @37805530 00000000 00000000 00000000 00000000
[ 7.263399] xhci_hcd 0000:02:00.0: @37805540 00000000 00000000 00000000 00000000
[ 7.263404] xhci_hcd 0000:02:00.0: @37805550 00000000 00000000 00000000 00000000
[ 7.263408] xhci_hcd 0000:02:00.0: @37805560 00000000 00000000 00000000 00000000
[ 7.263413] xhci_hcd 0000:02:00.0: @37805570 00000000 00000000 00000000 00000000
[ 7.263418] xhci_hcd 0000:02:00.0: @37805580 00000000 00000000 00000000 00000000
[ 7.263446] xhci_hcd 0000:02:00.0: @37805590 00000000 00000000 00000000 00000000
[ 7.263451] xhci_hcd 0000:02:00.0: @378055a0 00000000 00000000 00000000 00000000
[ 7.263456] xhci_hcd 0000:02:00.0: @378055b0 00000000 00000000 00000000 00000000
[ 7.263461] xhci_hcd 0000:02:00.0: @378055c0 00000000 00000000 00000000 00000000
[ 7.263466] xhci_hcd 0000:02:00.0: @378055d0 00000000 00000000 00000000 00000000
[ 7.263471] xhci_hcd 0000:02:00.0: @378055e0 00000000 00000000 00000000 00000000
[ 7.263475] xhci_hcd 0000:02:00.0: @378055f0 00000000 00000000 00000000 00000000
[ 7.263495] xhci_hcd 0000:02:00.0: @37805600 00000000 00000000 00000000 00000000
[ 7.263500] xhci_hcd 0000:02:00.0: @37805610 00000000 00000000 00000000 00000000
[ 7.263505] xhci_hcd 0000:02:00.0: @37805620 00000000 00000000 00000000 00000000
[ 7.263509] xhci_hcd 0000:02:00.0: @37805630 00000000 00000000 00000000 00000000
[ 7.263514] xhci_hcd 0000:02:00.0: @37805640 00000000 00000000 00000000 00000000
[ 7.263519] xhci_hcd 0000:02:00.0: @37805650 00000000 00000000 00000000 00000000
[ 7.263524] xhci_hcd 0000:02:00.0: @37805660 00000000 00000000 00000000 00000000
[ 7.263529] xhci_hcd 0000:02:00.0: @37805670 00000000 00000000 00000000 00000000
[ 7.263549] xhci_hcd 0000:02:00.0: @37805680 00000000 00000000 00000000 00000000
[ 7.263554] xhci_hcd 0000:02:00.0: @37805690 00000000 00000000 00000000 00000000
[ 7.263559] xhci_hcd 0000:02:00.0: @378056a0 00000000 00000000 00000000 00000000
[ 7.263563] xhci_hcd 0000:02:00.0: @378056b0 00000000 00000000 00000000 00000000
[ 7.263568] xhci_hcd 0000:02:00.0: @378056c0 00000000 00000000 00000000 00000000
[ 7.263573] xhci_hcd 0000:02:00.0: @378056d0 00000000 00000000 00000000 00000000
[ 7.263578] xhci_hcd 0000:02:00.0: @378056e0 00000000 00000000 00000000 00000000
[ 7.263582] xhci_hcd 0000:02:00.0: @378056f0 00000000 00000000 00000000 00000000
[ 7.263587] xhci_hcd 0000:02:00.0: @37805700 00000000 00000000 00000000 00000000
[ 7.263592] xhci_hcd 0000:02:00.0: @37805710 00000000 00000000 00000000 00000000
[ 7.263596] xhci_hcd 0000:02:00.0: @37805720 00000000 00000000 00000000 00000000
[ 7.263601] xhci_hcd 0000:02:00.0: @37805730 00000000 00000000 00000000 00000000
[ 7.263606] xhci_hcd 0000:02:00.0: @37805740 00000000 00000000 00000000 00000000
[ 7.263611] xhci_hcd 0000:02:00.0: @37805750 00000000 00000000 00000000 00000000
[ 7.263616] xhci_hcd 0000:02:00.0: @37805760 00000000 00000000 00000000 00000000
[ 7.263621] xhci_hcd 0000:02:00.0: @37805770 00000000 00000000 00000000 00000000
[ 7.263626] xhci_hcd 0000:02:00.0: @37805780 00000000 00000000 00000000 00000000
[ 7.263631] xhci_hcd 0000:02:00.0: @37805790 00000000 00000000 00000000 00000000
[ 7.263636] xhci_hcd 0000:02:00.0: @378057a0 00000000 00000000 00000000 00000000
[ 7.263641] xhci_hcd 0000:02:00.0: @378057b0 00000000 00000000 00000000 00000000
[ 7.263645] xhci_hcd 0000:02:00.0: @378057c0 00000000 00000000 00000000 00000000
[ 7.263650] xhci_hcd 0000:02:00.0: @378057d0 00000000 00000000 00000000 00000000
[ 7.263655] xhci_hcd 0000:02:00.0: @378057e0 00000000 00000000 00000000 00000000
[ 7.263660] xhci_hcd 0000:02:00.0: @378057f0 00000000 00000000 00000000 00000000
[ 7.263664] xhci_hcd 0000:02:00.0: Ring has not been updated
[ 7.263669] xhci_hcd 0000:02:00.0: Ring deq = ffff880037805400 (virt), 0x37805400 (dma)
[ 7.263673] xhci_hcd 0000:02:00.0: Ring deq updated 0 times
[ 7.263677] xhci_hcd 0000:02:00.0: Ring enq = ffff880037805400 (virt), 0x37805400 (dma)
[ 7.263683] xhci_hcd 0000:02:00.0: Ring enq updated 0 times
[ 7.263688] xhci_hcd 0000:02:00.0: ERST deq = 64'h37805400
[ 7.263692] xhci_hcd 0000:02:00.0: // Set the interrupt modulation register
[ 7.263697] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790624, 32'ha0, 4'hf);
[ 7.263712] xhci_hcd 0000:02:00.0: // Enable interrupts, cmd = 0x4.
[ 7.263716] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790020, 32'h4, 4'hf);
[ 7.263723] xhci_hcd 0000:02:00.0: // Enabling event ring interrupter ffffc90011790620 by writing 0x2 to irq_pending
[ 7.263730] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790620, 32'h2, 4'hf);
[ 7.263737] xhci_hcd 0000:02:00.0: ffffc90011790620: ir_set[0]
[ 7.263741] xhci_hcd 0000:02:00.0: ffffc90011790620: ir_set.pending = 0x2
[ 7.263747] xhci_hcd 0000:02:00.0: ffffc90011790624: ir_set.control = 0xa0
[ 7.263753] xhci_hcd 0000:02:00.0: ffffc90011790628: ir_set.erst_size = 0x1
[ 7.263761] xhci_hcd 0000:02:00.0: ffffc90011790630: ir_set.erst_base = @37806000
[ 7.263770] xhci_hcd 0000:02:00.0: ffffc90011790638: ir_set.erst_dequeue = @37805400
[ 7.263777] xhci_hcd 0000:02:00.0: // Turn on HC, cmd = 0x5.
[ 7.263783] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790020, 32'h5, 4'hf);
[ 7.263791] xhci_hcd 0000:02:00.0: // @ffffc90011790020 = 0x5
[ 7.263796] xhci_hcd 0000:02:00.0: Finished xhci_run
[ 7.263842] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 7.263853] usb usb2: default language 0x0409
[ 7.263865] usb usb2: udev 1, busnum 2, minor = 128
[ 7.263870] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.263877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.263883] usb usb2: Product: xHCI Host Controller
[ 7.263888] usb usb2: Manufacturer: Linux 2.6.32.8-usb-debug xhci_hcd
[ 7.263894] usb usb2: SerialNumber: 0000:02:00.0
[ 7.263960] usb usb2: uevent
[ 7.263985] usb usb2: usb_probe_device
[ 7.263992] usb usb2: configuration #1 chosen from 1 choice
[ 7.263998] xHCI xhci_add_endpoint called for root hub
[ 7.264004] xHCI xhci_check_bandwidth called for root hub
[ 7.264015] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.264041] usb 2-0:1.0: uevent
[ 7.264087] hub 2-0:1.0: usb_probe_interface
[ 7.264092] hub 2-0:1.0: usb_probe_interface - got id
[ 7.264098] hub 2-0:1.0: USB hub found
[ 7.264109] hub 2-0:1.0: 4 ports detected
[ 7.264114] hub 2-0:1.0: standalone hub
[ 7.264118] hub 2-0:1.0: individual port power switching
[ 7.264122] hub 2-0:1.0: individual port over-current protection
[ 7.264128] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 7.264134] hub 2-0:1.0: power on to power good time: 20ms
[ 7.264143] hub 2-0:1.0: local power source is good
[ 7.264146] hub 2-0:1.0: enabling power on all ports
[ 7.264154] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790420, 32'h2a0, 4'hf);
[ 7.264163] xhci_hcd 0000:02:00.0: set port power, actual port 0 status = 0x2a0
[ 7.264174] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790430, 32'h2a0, 4'hf);
[ 7.264183] xhci_hcd 0000:02:00.0: set port power, actual port 1 status = 0x2a0
[ 7.264194] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790440, 32'h2a0, 4'hf);
[ 7.264204] xhci_hcd 0000:02:00.0: set port power, actual port 2 status = 0x2a0
[ 7.264214] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790450, 32'h2a0, 4'hf);
[ 7.264223] xhci_hcd 0000:02:00.0: set port power, actual port 3 status = 0x2a0
[ 7.264255] drivers/usb/core/inode.c: creating file '001'
[ 7.267772] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.267791] btusb 1-1.6:1.0: usb_probe_interface
[ 7.267797] btusb 1-1.6:1.0: usb_probe_interface - got id
[ 7.267900] btusb 1-1.6:1.2: usb_probe_interface
[ 7.267906] btusb 1-1.6:1.2: usb_probe_interface - got id
[ 7.267919] btusb 1-1.6:1.3: usb_probe_interface
[ 7.267924] btusb 1-1.6:1.3: usb_probe_interface - got id
[ 7.267949] usbcore: registered new interface driver btusb
[ 7.281838] Linux video capture interface: v2.00
[ 7.303420] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.303424] Bluetooth: BNEP filters: protocol multicast
[ 7.306697] usb usb2: uevent
[ 7.322362] uvcvideo 1-1.5:1.0: usb_probe_interface
[ 7.322368] uvcvideo 1-1.5:1.0: usb_probe_interface - got id
[ 7.322382] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b16c)
[ 7.323608] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6
[ 7.323689] usbcore: registered new interface driver uvcvideo
[ 7.323696] USB Video Class driver (v0.1.0)
[ 7.337038] usb usb2: uevent
[ 7.337165] usb 2-0:1.0: uevent
[ 7.338146] usb usb1: uevent
[ 7.338252] usb 1-0:1.0: uevent
[ 7.338309] usb 1-1: uevent
[ 7.338393] usb 1-1.5: uevent
[ 7.338477] usb 1-1.5:1.0: uevent
[ 7.338684] usb 1-1.5:1.1: uevent
[ 7.338742] usb 1-1.6: uevent
[ 7.338843] usb 1-1.6:1.0: uevent
[ 7.338987] usb 1-1.6:1.1: uevent
[ 7.339039] usb 1-1.6:1.2: uevent
[ 7.339089] usb 1-1.6:1.3: uevent
[ 7.339141] usb 1-1:1.0: uevent
[ 7.343294] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.345756] lp: driver loaded but no devices found
[ 7.363944] atl1c 0000:04:00.0: version 1.0.0.1-NAPI
[ 7.372854] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 7.372860] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7.372870] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 7.372872] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7.372881] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 7.372884] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7.372889] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 7.372893] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7.372901] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 7.473553] usb 1-1.5: link qh16-0001/ffff8802273e3b80 start 2 [1/0 us]
[ 7.473593] usb 1-1.5: unlink qh16-0001/ffff8802273e3b80 start 2 [1/0 us]
[ 7.474511] alloc irq_desc for 34 on node -1
[ 7.474516] alloc kstat_irqs on node -1
[ 7.474534] atl1c 0000:04:00.0: irq 34 for MSI/MSI-X
[ 7.474604] usb 1-1.5:1.0: uevent
[ 7.474763] usb 1-1.5: uevent
[ 7.475838] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.477174] usb 1-1.5:1.0: uevent
[ 7.477286] usb 1-1.5: uevent
[ 7.477377] usb 1-1.5:1.0: uevent
[ 7.478672] usb 1-1.5:1.0: uevent
[ 7.483707] ehci_hcd 0000:00:1d.0: reused qh ffff8802273e3b80 schedule
[ 7.483713] usb 1-1.5: link qh16-0001/ffff8802273e3b80 start 2 [1/0 us]
[ 7.485980] usb 1-1.5: unlink qh16-0001/ffff8802273e3b80 start 2 [1/0 us]
[ 7.498976] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 7.498979] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 7.499102] iwlagn 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.499131] iwlagn 0000:03:00.0: setting latency timer to 64
[ 7.500008] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 6000 Series 2x2 AGN REV=0x74
[ 7.521753] Bridge firewalling registered
[ 7.523329] lis3lv02d: laptop model unknown, using default axes configuration
[ 7.524250] lis3lv02d: 1-byte sensor found
[ 7.536767] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 7.536871] Registered led device: hp::hddprotect
[ 7.536897] lis3lv02d driver loaded.
[ 7.536916] usb 1-1.6: link qh1-0e01/ffff88022b443800 start 0 [1/2 us]
[ 7.541636] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 7.541702] alloc irq_desc for 35 on node -1
[ 7.541706] alloc kstat_irqs on node -1
[ 7.541727] iwlagn 0000:03:00.0: irq 35 for MSI/MSI-X
[ 7.553682] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.564911] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6000-4.ucode
[ 7.574355] iwlagn 0000:03:00.0: loaded firmware version 9.176.4.1
[ 7.641653] alloc irq_desc for 22 on node -1
[ 7.641656] alloc kstat_irqs on node -1
[ 7.641663] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.641844] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.768846] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.784549] CE: hpet increasing min_delta_ns to 15000 nsec
[ 7.869054] Registered led device: iwl-phy0::radio
[ 7.869080] Registered led device: iwl-phy0::assoc
[ 7.869109] Registered led device: iwl-phy0::RX
[ 7.869138] Registered led device: iwl-phy0::TX
[ 8.220232] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000
[ 8.220234] Synaptics: Clickpad mode enabled
[ 8.291150] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 8.502848] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.802668] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00bf0900
[ 8.802822] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.802885] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.803998] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.804064] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 8.816013] ppdev: user-space parallel port driver
[ 8.879290] usb usb2: uevent
[ 8.886974] usb usb1: uevent
[ 8.890948] usb usb1: uevent
[ 8.894843] usb 1-1: uevent
[ 8.900160] usb 1-1.5: uevent
[ 8.904769] usb 1-1.5: uevent
[ 8.909861] usb 1-1: uevent
[ 8.913872] usb 1-1.6: uevent
[ 8.917868] usb 1-1.6: uevent
[ 8.921796] usb 1-1.6: uevent
[ 8.925766] usb 1-1.6: uevent
[ 8.929854] usb 1-1: uevent
[ 9.164117] CPU0 attaching NULL sched-domain.
[ 9.164126] CPU1 attaching NULL sched-domain.
[ 9.164130] CPU2 attaching NULL sched-domain.
[ 9.164134] CPU3 attaching NULL sched-domain.
[ 9.164138] CPU4 attaching NULL sched-domain.
[ 9.164142] CPU5 attaching NULL sched-domain.
[ 9.164146] CPU6 attaching NULL sched-domain.
[ 9.164149] CPU7 attaching NULL sched-domain.
[ 9.321742] CPU0 attaching sched-domain:
[ 9.321745] domain 0: span 0,4 level SIBLING
[ 9.321747] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 9.321751] domain 1: span 0-7 level MC
[ 9.321753] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 9.321760] CPU1 attaching sched-domain:
[ 9.321762] domain 0: span 1,5 level SIBLING
[ 9.321763] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 9.321767] domain 1: span 0-7 level MC
[ 9.321768] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 9.321775] CPU2 attaching sched-domain:
[ 9.321776] domain 0: span 2,6 level SIBLING
[ 9.321778] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 9.321781] domain 1: span 0-7 level MC
[ 9.321783] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 9.321789] CPU3 attaching sched-domain:
[ 9.321791] domain 0: span 3,7 level SIBLING
[ 9.321792] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 9.321796] domain 1: span 0-7 level MC
[ 9.321797] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 9.321804] CPU4 attaching sched-domain:
[ 9.321805] domain 0: span 0,4 level SIBLING
[ 9.321806] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 9.321810] domain 1: span 0-7 level MC
[ 9.321812] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 9.321818] CPU5 attaching sched-domain:
[ 9.321819] domain 0: span 1,5 level SIBLING
[ 9.321821] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 9.321824] domain 1: span 0-7 level MC
[ 9.321826] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 9.321832] CPU6 attaching sched-domain:
[ 9.321833] domain 0: span 2,6 level SIBLING
[ 9.321835] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 9.321839] domain 1: span 0-7 level MC
[ 9.321840] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 9.321846] CPU7 attaching sched-domain:
[ 9.321848] domain 0: span 3,7 level SIBLING
[ 9.321849] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 9.321853] domain 1: span 0-7 level MC
[ 9.321854] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 9.340832] usplash:555 freeing invalid memtype ffffffffc0000000-ffffffffc1000000
[ 9.801861] alloc irq_desc for 36 on node -1
[ 9.801863] alloc kstat_irqs on node -1
[ 9.801871] fglrx_pci 0000:01:00.0: irq 36 for MSI/MSI-X
[ 9.802367] [fglrx] Firegl kernel thread PID: 2065
[ 9.910087] [fglrx] Gart USWC size:1279 M.
[ 9.910089] [fglrx] Gart cacheable size:508 M.
[ 9.910093] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 9.910094] [fglrx] Reserved FB block: Unshared offset:f8ff000, size:401000
[ 9.910096] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 11.216451] hub 2-0:1.0: hub_suspend
[ 11.216459] usb usb2: bus auto-suspend
[ 11.216462] usb usb2: bus suspend fail, err -2
[ 11.216464] hub 2-0:1.0: hub_resume
[ 11.216474] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 11.216477] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 11.216486] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 11.216489] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 11.216494] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 11.216496] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 11.216503] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 11.216505] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 11.216516] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 11.939537] usb usb1: uevent
[ 11.939594] usb 1-0:1.0: uevent
[ 11.939629] usb 1-1: uevent
[ 11.939679] usb 1-1:1.0: uevent
[ 11.939714] usb 1-1.5: uevent
[ 11.939766] usb 1-1.5:1.0: uevent
[ 11.939801] usb 1-1.5:1.1: uevent
[ 11.939836] usb 1-1.6: uevent
[ 11.939887] usb 1-1.6:1.0: uevent
[ 11.939928] usb 1-1.6:1.1: uevent
[ 11.939968] usb 1-1.6:1.2: uevent
[ 11.940008] usb 1-1.6:1.3: uevent
[ 11.940043] usb usb2: uevent
[ 11.940095] usb 2-0:1.0: uevent
[ 12.046746] usb usb2: uevent
[ 12.047210] usb 2-0:1.0: uevent
[ 12.047553] usb usb1: uevent
[ 12.047942] usb 1-0:1.0: uevent
[ 12.048279] usb 1-1: uevent
[ 12.048674] usb 1-1.5: uevent
[ 12.049067] usb 1-1.5:1.0: uevent
[ 12.049614] usb 1-1.5:1.1: uevent
[ 12.050015] usb 1-1.6: uevent
[ 12.050413] usb 1-1.6:1.0: uevent
[ 12.050747] usb 1-1.6:1.1: uevent
[ 12.051077] usb 1-1.6:1.2: uevent
[ 12.051414] usb 1-1.6:1.3: uevent
[ 12.051747] usb 1-1:1.0: uevent
[ 12.140469] CPU0 attaching NULL sched-domain.
[ 12.140474] CPU1 attaching NULL sched-domain.
[ 12.140475] CPU2 attaching NULL sched-domain.
[ 12.140477] CPU3 attaching NULL sched-domain.
[ 12.140479] CPU4 attaching NULL sched-domain.
[ 12.140480] CPU5 attaching NULL sched-domain.
[ 12.140482] CPU6 attaching NULL sched-domain.
[ 12.140483] CPU7 attaching NULL sched-domain.
[ 12.238511] CPU0 attaching sched-domain:
[ 12.238516] domain 0: span 0,4 level SIBLING
[ 12.238518] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 12.238524] domain 1: span 0-7 level MC
[ 12.238527] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 12.238537] CPU1 attaching sched-domain:
[ 12.238539] domain 0: span 1,5 level SIBLING
[ 12.238541] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 12.238546] domain 1: span 0-7 level MC
[ 12.238549] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 12.238557] CPU2 attaching sched-domain:
[ 12.238559] domain 0: span 2,6 level SIBLING
[ 12.238561] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 12.238566] domain 1: span 0-7 level MC
[ 12.238569] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 12.238577] CPU3 attaching sched-domain:
[ 12.238579] domain 0: span 3,7 level SIBLING
[ 12.238581] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 12.238586] domain 1: span 0-7 level MC
[ 12.238588] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 12.238597] CPU4 attaching sched-domain:
[ 12.238599] domain 0: span 0,4 level SIBLING
[ 12.238601] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 12.238606] domain 1: span 0-7 level MC
[ 12.238608] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 12.238617] CPU5 attaching sched-domain:
[ 12.238619] domain 0: span 1,5 level SIBLING
[ 12.238621] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 12.238626] domain 1: span 0-7 level MC
[ 12.238628] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 12.238637] CPU6 attaching sched-domain:
[ 12.238639] domain 0: span 2,6 level SIBLING
[ 12.238641] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 12.238646] domain 1: span 0-7 level MC
[ 12.238648] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 12.238657] CPU7 attaching sched-domain:
[ 12.238659] domain 0: span 3,7 level SIBLING
[ 12.238661] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 12.238666] domain 1: span 0-7 level MC
[ 12.238668] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 12.962613] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 14.123326] hub 2-0:1.0: hub_suspend
[ 14.123340] usb usb2: bus auto-suspend
[ 14.123345] usb usb2: bus suspend fail, err -2
[ 14.123349] hub 2-0:1.0: hub_resume
[ 14.123360] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 14.123365] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 14.123378] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 14.123382] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 14.123392] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 14.123396] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 14.123405] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 14.123410] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 14.123519] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 16.604428] usb usb1: uevent
[ 16.604484] usb 1-0:1.0: uevent
[ 16.604520] usb 1-1: uevent
[ 16.604570] usb 1-1:1.0: uevent
[ 16.604606] usb 1-1.5: uevent
[ 16.604657] usb 1-1.5:1.0: uevent
[ 16.604692] usb 1-1.5:1.1: uevent
[ 16.604728] usb 1-1.6: uevent
[ 16.604779] usb 1-1.6:1.0: uevent
[ 16.604815] usb 1-1.6:1.1: uevent
[ 16.604849] usb 1-1.6:1.2: uevent
[ 16.604890] usb 1-1.6:1.3: uevent
[ 16.604931] usb usb2: uevent
[ 16.604991] usb 2-0:1.0: uevent
[ 16.675770] usb usb1: uevent
[ 16.675826] usb 1-0:1.0: uevent
[ 16.675861] usb 1-1: uevent
[ 16.675911] usb 1-1:1.0: uevent
[ 16.675946] usb 1-1.5: uevent
[ 16.675998] usb 1-1.5:1.0: uevent
[ 16.676034] usb 1-1.5:1.1: uevent
[ 16.676069] usb 1-1.6: uevent
[ 16.676120] usb 1-1.6:1.0: uevent
[ 16.676155] usb 1-1.6:1.1: uevent
[ 16.676190] usb 1-1.6:1.2: uevent
[ 16.676224] usb 1-1.6:1.3: uevent
[ 16.676259] usb usb2: uevent
[ 16.676310] usb 2-0:1.0: uevent
[ 17.120075] hub 2-0:1.0: hub_suspend
[ 17.120088] usb usb2: bus auto-suspend
[ 17.120093] usb usb2: bus suspend fail, err -2
[ 17.120097] hub 2-0:1.0: hub_resume
[ 17.120108] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 17.120112] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 17.120124] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 17.120129] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 17.120138] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 17.120142] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 17.120152] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 17.120156] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 17.120238] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 19.902173] usb usb2: uevent
[ 19.902284] usb 2-0:1.0: uevent
[ 19.902352] usb usb1: uevent
[ 19.902453] usb 1-0:1.0: uevent
[ 19.902524] usb 1-1: uevent
[ 19.902626] usb 1-1.5: uevent
[ 19.902729] usb 1-1.5:1.0: uevent
[ 19.902793] usb 1-1.5:1.1: uevent
[ 19.902863] usb 1-1.6: uevent
[ 19.902970] usb 1-1.6:1.0: uevent
[ 19.903035] usb 1-1.6:1.1: uevent
[ 19.903099] usb 1-1.6:1.2: uevent
[ 19.903161] usb 1-1.6:1.3: uevent
[ 19.903224] usb 1-1:1.0: uevent
[ 20.118588] hub 2-0:1.0: hub_suspend
[ 20.118601] usb usb2: bus auto-suspend
[ 20.118606] usb usb2: bus suspend fail, err -2
[ 20.118611] hub 2-0:1.0: hub_resume
[ 20.118624] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 20.118629] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 20.118640] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 20.118644] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 20.118652] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 20.118657] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 20.118667] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 20.118671] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 20.118699] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 23.114506] hub 2-0:1.0: hub_suspend
[ 23.114517] usb usb2: bus auto-suspend
[ 23.114520] usb usb2: bus suspend fail, err -2
[ 23.114523] hub 2-0:1.0: hub_resume
[ 23.114535] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 23.114538] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 23.114548] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 23.114552] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 23.114559] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 23.114562] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 23.114568] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 23.114571] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 23.114589] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 25.550897] wlan0: deauthenticating from 00:1c:10:88:97:b6 by local choice (reason=3)
[ 25.550964] wlan0: direct probe to AP 00:1c:10:88:97:b6 (try 1)
[ 25.555864] wlan0: direct probe responded
[ 25.555871] wlan0: authenticate with AP 00:1c:10:88:97:b6 (try 1)
[ 25.557805] wlan0: authenticated
[ 25.557835] wlan0: associate with AP 00:1c:10:88:97:b6 (try 1)
[ 25.560456] wlan0: RX AssocResp from 00:1c:10:88:97:b6 (capab=0x411 status=0 aid=2)
[ 25.560462] wlan0: associated
[ 25.563255] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.110258] hub 2-0:1.0: hub_suspend
[ 26.110270] usb usb2: bus auto-suspend
[ 26.110275] usb usb2: bus suspend fail, err -2
[ 26.110279] hub 2-0:1.0: hub_resume
[ 26.110292] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 26.110297] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 26.110309] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 26.110313] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 26.110323] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 26.110327] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 26.110336] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 26.110341] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 26.110359] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 29.107009] hub 2-0:1.0: hub_suspend
[ 29.107020] usb usb2: bus auto-suspend
[ 29.107024] usb usb2: bus suspend fail, err -2
[ 29.107027] hub 2-0:1.0: hub_resume
[ 29.107038] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 29.107041] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 29.107052] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 29.107055] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 29.107062] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 29.107065] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 29.107071] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 29.107074] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 29.107086] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 31.775811] compiz.real[2499]: segfault at 3fe2000 ip 00007fddc97d4823 sp 00007fff7644b268 error 4 in libc-2.10.1.so[7fddc9752000+166000]
[ 32.103794] hub 2-0:1.0: hub_suspend
[ 32.103803] usb usb2: bus auto-suspend
[ 32.103806] usb usb2: bus suspend fail, err -2
[ 32.103808] hub 2-0:1.0: hub_resume
[ 32.103818] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 32.103821] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 32.103829] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 32.103831] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 32.103836] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 32.103838] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 32.103845] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 32.103847] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 32.103855] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 35.101965] hub 2-0:1.0: hub_suspend
[ 35.101979] usb usb2: bus auto-suspend
[ 35.101984] usb usb2: bus suspend fail, err -2
[ 35.101988] hub 2-0:1.0: hub_resume
[ 35.102001] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 35.102006] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 35.102018] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 35.102022] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 35.102032] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 35.102036] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 35.102045] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 35.102050] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 35.102063] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 36.071295] wlan0: no IPv6 routers present
[ 38.102004] hub 2-0:1.0: hub_suspend
[ 38.102012] usb usb2: bus auto-suspend
[ 38.102014] usb usb2: bus suspend fail, err -2
[ 38.102016] hub 2-0:1.0: hub_resume
[ 38.102025] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 38.102027] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 38.102033] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 38.102035] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 38.102040] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 38.102042] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 38.102046] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 38.102048] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 38.102058] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 41.099907] hub 2-0:1.0: hub_suspend
[ 41.099920] usb usb2: bus auto-suspend
[ 41.099925] usb usb2: bus suspend fail, err -2
[ 41.099929] hub 2-0:1.0: hub_resume
[ 41.099943] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 41.099947] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 41.099960] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 41.099964] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 41.099974] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 41.099978] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 41.099987] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 41.099992] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 41.100010] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 44.098610] hub 2-0:1.0: hub_suspend
[ 44.098624] usb usb2: bus auto-suspend
[ 44.098629] usb usb2: bus suspend fail, err -2
[ 44.098633] hub 2-0:1.0: hub_resume
[ 44.098646] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 44.098651] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 44.098663] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 44.098668] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 44.098677] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 44.098681] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 44.098691] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 44.098695] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 44.098710] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 47.094913] hub 2-0:1.0: hub_suspend
[ 47.094926] usb usb2: bus auto-suspend
[ 47.094931] usb usb2: bus suspend fail, err -2
[ 47.094935] hub 2-0:1.0: hub_resume
[ 47.094948] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 47.094952] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 47.094964] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 47.094969] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 47.094978] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 47.094983] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 47.094992] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 47.094996] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 47.095010] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 50.093251] hub 2-0:1.0: hub_suspend
[ 50.093264] usb usb2: bus auto-suspend
[ 50.093270] usb usb2: bus suspend fail, err -2
[ 50.093274] hub 2-0:1.0: hub_resume
[ 50.093287] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 50.093292] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 50.093304] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 50.093308] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 50.093318] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 50.093322] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 50.093332] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 50.093336] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 50.093351] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 53.091507] hub 2-0:1.0: hub_suspend
[ 53.091520] usb usb2: bus auto-suspend
[ 53.091525] usb usb2: bus suspend fail, err -2
[ 53.091529] hub 2-0:1.0: hub_resume
[ 53.091542] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 53.091547] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 53.091559] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 53.091563] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 53.091573] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 53.091577] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 53.091586] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 53.091591] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 53.091609] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 56.089773] hub 2-0:1.0: hub_suspend
[ 56.089787] usb usb2: bus auto-suspend
[ 56.089792] usb usb2: bus suspend fail, err -2
[ 56.089796] hub 2-0:1.0: hub_resume
[ 56.089809] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 56.089814] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 56.089826] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 56.089830] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 56.089840] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 56.089844] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 56.089854] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 56.089858] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 56.089873] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 59.088045] hub 2-0:1.0: hub_suspend
[ 59.088058] usb usb2: bus auto-suspend
[ 59.088063] usb usb2: bus suspend fail, err -2
[ 59.088067] hub 2-0:1.0: hub_resume
[ 59.088079] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 59.088084] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 59.088096] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 59.088101] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 59.088110] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 59.088115] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 59.088124] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 59.088128] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 59.088146] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 62.086212] hub 2-0:1.0: hub_suspend
[ 62.086225] usb usb2: bus auto-suspend
[ 62.086230] usb usb2: bus suspend fail, err -2
[ 62.086235] hub 2-0:1.0: hub_resume
[ 62.086248] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 62.086252] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 62.086264] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 62.086269] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 62.086278] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 62.086283] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 62.086292] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 62.086296] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 62.086310] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 65.084487] hub 2-0:1.0: hub_suspend
[ 65.084500] usb usb2: bus auto-suspend
[ 65.084505] usb usb2: bus suspend fail, err -2
[ 65.084509] hub 2-0:1.0: hub_resume
[ 65.084522] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 65.084527] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 65.084539] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 65.084543] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 65.084553] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 65.084557] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 65.084566] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 65.084571] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 65.084583] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 67.203292] xhci_hcd 0000:02:00.0: Poll event ring: 4294944003
[ 67.203302] xhci_hcd 0000:02:00.0: op reg status = 0x0
[ 67.203309] xhci_hcd 0000:02:00.0: ir_set 0 pending = 0x2
[ 67.203313] xhci_hcd 0000:02:00.0: No-op commands handled = 0
[ 67.203318] xhci_hcd 0000:02:00.0: HC error bitmask = 0x0
[ 67.203322] xhci_hcd 0000:02:00.0: Event ring:
[ 67.203328] xhci_hcd 0000:02:00.0: @37805400 00000000 00000000 00000000 00000000
[ 67.203333] xhci_hcd 0000:02:00.0: @37805410 00000000 00000000 00000000 00000000
[ 67.203338] xhci_hcd 0000:02:00.0: @37805420 00000000 00000000 00000000 00000000
[ 67.203343] xhci_hcd 0000:02:00.0: @37805430 00000000 00000000 00000000 00000000
[ 67.203348] xhci_hcd 0000:02:00.0: @37805440 00000000 00000000 00000000 00000000
[ 67.203353] xhci_hcd 0000:02:00.0: @37805450 00000000 00000000 00000000 00000000
[ 67.203358] xhci_hcd 0000:02:00.0: @37805460 00000000 00000000 00000000 00000000
[ 67.203363] xhci_hcd 0000:02:00.0: @37805470 00000000 00000000 00000000 00000000
[ 67.203368] xhci_hcd 0000:02:00.0: @37805480 00000000 00000000 00000000 00000000
[ 67.203373] xhci_hcd 0000:02:00.0: @37805490 00000000 00000000 00000000 00000000
[ 67.203378] xhci_hcd 0000:02:00.0: @378054a0 00000000 00000000 00000000 00000000
[ 67.203383] xhci_hcd 0000:02:00.0: @378054b0 00000000 00000000 00000000 00000000
[ 67.203388] xhci_hcd 0000:02:00.0: @378054c0 00000000 00000000 00000000 00000000
[ 67.203393] xhci_hcd 0000:02:00.0: @378054d0 00000000 00000000 00000000 00000000
[ 67.203398] xhci_hcd 0000:02:00.0: @378054e0 00000000 00000000 00000000 00000000
[ 67.203403] xhci_hcd 0000:02:00.0: @378054f0 00000000 00000000 00000000 00000000
[ 67.203408] xhci_hcd 0000:02:00.0: @37805500 00000000 00000000 00000000 00000000
[ 67.203413] xhci_hcd 0000:02:00.0: @37805510 00000000 00000000 00000000 00000000
[ 67.203418] xhci_hcd 0000:02:00.0: @37805520 00000000 00000000 00000000 00000000
[ 67.203423] xhci_hcd 0000:02:00.0: @37805530 00000000 00000000 00000000 00000000
[ 67.203428] xhci_hcd 0000:02:00.0: @37805540 00000000 00000000 00000000 00000000
[ 67.203433] xhci_hcd 0000:02:00.0: @37805550 00000000 00000000 00000000 00000000
[ 67.203438] xhci_hcd 0000:02:00.0: @37805560 00000000 00000000 00000000 00000000
[ 67.203443] xhci_hcd 0000:02:00.0: @37805570 00000000 00000000 00000000 00000000
[ 67.203448] xhci_hcd 0000:02:00.0: @37805580 00000000 00000000 00000000 00000000
[ 67.203453] xhci_hcd 0000:02:00.0: @37805590 00000000 00000000 00000000 00000000
[ 67.203458] xhci_hcd 0000:02:00.0: @378055a0 00000000 00000000 00000000 00000000
[ 67.203463] xhci_hcd 0000:02:00.0: @378055b0 00000000 00000000 00000000 00000000
[ 67.203468] xhci_hcd 0000:02:00.0: @378055c0 00000000 00000000 00000000 00000000
[ 67.203473] xhci_hcd 0000:02:00.0: @378055d0 00000000 00000000 00000000 00000000
[ 67.203478] xhci_hcd 0000:02:00.0: @378055e0 00000000 00000000 00000000 00000000
[ 67.203483] xhci_hcd 0000:02:00.0: @378055f0 00000000 00000000 00000000 00000000
[ 67.203488] xhci_hcd 0000:02:00.0: @37805600 00000000 00000000 00000000 00000000
[ 67.203493] xhci_hcd 0000:02:00.0: @37805610 00000000 00000000 00000000 00000000
[ 67.203498] xhci_hcd 0000:02:00.0: @37805620 00000000 00000000 00000000 00000000
[ 67.203503] xhci_hcd 0000:02:00.0: @37805630 00000000 00000000 00000000 00000000
[ 67.203508] xhci_hcd 0000:02:00.0: @37805640 00000000 00000000 00000000 00000000
[ 67.203513] xhci_hcd 0000:02:00.0: @37805650 00000000 00000000 00000000 00000000
[ 67.203518] xhci_hcd 0000:02:00.0: @37805660 00000000 00000000 00000000 00000000
[ 67.203523] xhci_hcd 0000:02:00.0: @37805670 00000000 00000000 00000000 00000000
[ 67.203528] xhci_hcd 0000:02:00.0: @37805680 00000000 00000000 00000000 00000000
[ 67.203533] xhci_hcd 0000:02:00.0: @37805690 00000000 00000000 00000000 00000000
[ 67.203538] xhci_hcd 0000:02:00.0: @378056a0 00000000 00000000 00000000 00000000
[ 67.203543] xhci_hcd 0000:02:00.0: @378056b0 00000000 00000000 00000000 00000000
[ 67.203548] xhci_hcd 0000:02:00.0: @378056c0 00000000 00000000 00000000 00000000
[ 67.203553] xhci_hcd 0000:02:00.0: @378056d0 00000000 00000000 00000000 00000000
[ 67.203558] xhci_hcd 0000:02:00.0: @378056e0 00000000 00000000 00000000 00000000
[ 67.203563] xhci_hcd 0000:02:00.0: @378056f0 00000000 00000000 00000000 00000000
[ 67.203568] xhci_hcd 0000:02:00.0: @37805700 00000000 00000000 00000000 00000000
[ 67.203573] xhci_hcd 0000:02:00.0: @37805710 00000000 00000000 00000000 00000000
[ 67.203578] xhci_hcd 0000:02:00.0: @37805720 00000000 00000000 00000000 00000000
[ 67.203583] xhci_hcd 0000:02:00.0: @37805730 00000000 00000000 00000000 00000000
[ 67.203588] xhci_hcd 0000:02:00.0: @37805740 00000000 00000000 00000000 00000000
[ 67.203593] xhci_hcd 0000:02:00.0: @37805750 00000000 00000000 00000000 00000000
[ 67.203598] xhci_hcd 0000:02:00.0: @37805760 00000000 00000000 00000000 00000000
[ 67.203603] xhci_hcd 0000:02:00.0: @37805770 00000000 00000000 00000000 00000000
[ 67.203608] xhci_hcd 0000:02:00.0: @37805780 00000000 00000000 00000000 00000000
[ 67.203613] xhci_hcd 0000:02:00.0: @37805790 00000000 00000000 00000000 00000000
[ 67.203618] xhci_hcd 0000:02:00.0: @378057a0 00000000 00000000 00000000 00000000
[ 67.203622] xhci_hcd 0000:02:00.0: @378057b0 00000000 00000000 00000000 00000000
[ 67.203627] xhci_hcd 0000:02:00.0: @378057c0 00000000 00000000 00000000 00000000
[ 67.203632] xhci_hcd 0000:02:00.0: @378057d0 00000000 00000000 00000000 00000000
[ 67.203637] xhci_hcd 0000:02:00.0: @378057e0 00000000 00000000 00000000 00000000
[ 67.203642] xhci_hcd 0000:02:00.0: @378057f0 00000000 00000000 00000000 00000000
[ 67.203649] xhci_hcd 0000:02:00.0: Ring deq = ffff880037805400 (virt), 0x37805400 (dma)
[ 67.203653] xhci_hcd 0000:02:00.0: Ring deq updated 0 times
[ 67.203658] xhci_hcd 0000:02:00.0: Ring enq = ffff880037805400 (virt), 0x37805400 (dma)
[ 67.203663] xhci_hcd 0000:02:00.0: Ring enq updated 0 times
[ 67.203672] xhci_hcd 0000:02:00.0: ERST deq = 64'h37805400
[ 67.203676] xhci_hcd 0000:02:00.0: Command ring:
[ 67.203681] xhci_hcd 0000:02:00.0: @37805000 00000000 00000000 00000000 00000000
[ 67.203686] xhci_hcd 0000:02:00.0: @37805010 00000000 00000000 00000000 00000000
[ 67.203691] xhci_hcd 0000:02:00.0: @37805020 00000000 00000000 00000000 00000000
[ 67.203695] xhci_hcd 0000:02:00.0: @37805030 00000000 00000000 00000000 00000000
[ 67.203700] xhci_hcd 0000:02:00.0: @37805040 00000000 00000000 00000000 00000000
[ 67.203705] xhci_hcd 0000:02:00.0: @37805050 00000000 00000000 00000000 00000000
[ 67.203710] xhci_hcd 0000:02:00.0: @37805060 00000000 00000000 00000000 00000000
[ 67.203715] xhci_hcd 0000:02:00.0: @37805070 00000000 00000000 00000000 00000000
[ 67.203720] xhci_hcd 0000:02:00.0: @37805080 00000000 00000000 00000000 00000000
[ 67.203725] xhci_hcd 0000:02:00.0: @37805090 00000000 00000000 00000000 00000000
[ 67.203729] xhci_hcd 0000:02:00.0: @378050a0 00000000 00000000 00000000 00000000
[ 67.203734] xhci_hcd 0000:02:00.0: @378050b0 00000000 00000000 00000000 00000000
[ 67.203739] xhci_hcd 0000:02:00.0: @378050c0 00000000 00000000 00000000 00000000
[ 67.203744] xhci_hcd 0000:02:00.0: @378050d0 00000000 00000000 00000000 00000000
[ 67.203749] xhci_hcd 0000:02:00.0: @378050e0 00000000 00000000 00000000 00000000
[ 67.203754] xhci_hcd 0000:02:00.0: @378050f0 00000000 00000000 00000000 00000000
[ 67.203759] xhci_hcd 0000:02:00.0: @37805100 00000000 00000000 00000000 00000000
[ 67.203763] xhci_hcd 0000:02:00.0: @37805110 00000000 00000000 00000000 00000000
[ 67.203768] xhci_hcd 0000:02:00.0: @37805120 00000000 00000000 00000000 00000000
[ 67.203773] xhci_hcd 0000:02:00.0: @37805130 00000000 00000000 00000000 00000000
[ 67.203778] xhci_hcd 0000:02:00.0: @37805140 00000000 00000000 00000000 00000000
[ 67.203783] xhci_hcd 0000:02:00.0: @37805150 00000000 00000000 00000000 00000000
[ 67.203788] xhci_hcd 0000:02:00.0: @37805160 00000000 00000000 00000000 00000000
[ 67.203793] xhci_hcd 0000:02:00.0: @37805170 00000000 00000000 00000000 00000000
[ 67.203797] xhci_hcd 0000:02:00.0: @37805180 00000000 00000000 00000000 00000000
[ 67.203802] xhci_hcd 0000:02:00.0: @37805190 00000000 00000000 00000000 00000000
[ 67.203807] xhci_hcd 0000:02:00.0: @378051a0 00000000 00000000 00000000 00000000
[ 67.203812] xhci_hcd 0000:02:00.0: @378051b0 00000000 00000000 00000000 00000000
[ 67.203817] xhci_hcd 0000:02:00.0: @378051c0 00000000 00000000 00000000 00000000
[ 67.203822] xhci_hcd 0000:02:00.0: @378051d0 00000000 00000000 00000000 00000000
[ 67.203827] xhci_hcd 0000:02:00.0: @378051e0 00000000 00000000 00000000 00000000
[ 67.203831] xhci_hcd 0000:02:00.0: @378051f0 00000000 00000000 00000000 00000000
[ 67.203836] xhci_hcd 0000:02:00.0: @37805200 00000000 00000000 00000000 00000000
[ 67.203841] xhci_hcd 0000:02:00.0: @37805210 00000000 00000000 00000000 00000000
[ 67.203846] xhci_hcd 0000:02:00.0: @37805220 00000000 00000000 00000000 00000000
[ 67.203851] xhci_hcd 0000:02:00.0: @37805230 00000000 00000000 00000000 00000000
[ 67.203856] xhci_hcd 0000:02:00.0: @37805240 00000000 00000000 00000000 00000000
[ 67.203861] xhci_hcd 0000:02:00.0: @37805250 00000000 00000000 00000000 00000000
[ 67.203865] xhci_hcd 0000:02:00.0: @37805260 00000000 00000000 00000000 00000000
[ 67.203870] xhci_hcd 0000:02:00.0: @37805270 00000000 00000000 00000000 00000000
[ 67.203875] xhci_hcd 0000:02:00.0: @37805280 00000000 00000000 00000000 00000000
[ 67.203880] xhci_hcd 0000:02:00.0: @37805290 00000000 00000000 00000000 00000000
[ 67.203885] xhci_hcd 0000:02:00.0: @378052a0 00000000 00000000 00000000 00000000
[ 67.203890] xhci_hcd 0000:02:00.0: @378052b0 00000000 00000000 00000000 00000000
[ 67.203895] xhci_hcd 0000:02:00.0: @378052c0 00000000 00000000 00000000 00000000
[ 67.203899] xhci_hcd 0000:02:00.0: @378052d0 00000000 00000000 00000000 00000000
[ 67.203904] xhci_hcd 0000:02:00.0: @378052e0 00000000 00000000 00000000 00000000
[ 67.203909] xhci_hcd 0000:02:00.0: @378052f0 00000000 00000000 00000000 00000000
[ 67.203914] xhci_hcd 0000:02:00.0: @37805300 00000000 00000000 00000000 00000000
[ 67.203919] xhci_hcd 0000:02:00.0: @37805310 00000000 00000000 00000000 00000000
[ 67.203924] xhci_hcd 0000:02:00.0: @37805320 00000000 00000000 00000000 00000000
[ 67.203929] xhci_hcd 0000:02:00.0: @37805330 00000000 00000000 00000000 00000000
[ 67.203933] xhci_hcd 0000:02:00.0: @37805340 00000000 00000000 00000000 00000000
[ 67.203938] xhci_hcd 0000:02:00.0: @37805350 00000000 00000000 00000000 00000000
[ 67.203943] xhci_hcd 0000:02:00.0: @37805360 00000000 00000000 00000000 00000000
[ 67.203948] xhci_hcd 0000:02:00.0: @37805370 00000000 00000000 00000000 00000000
[ 67.203953] xhci_hcd 0000:02:00.0: @37805380 00000000 00000000 00000000 00000000
[ 67.203958] xhci_hcd 0000:02:00.0: @37805390 00000000 00000000 00000000 00000000
[ 67.203963] xhci_hcd 0000:02:00.0: @378053a0 00000000 00000000 00000000 00000000
[ 67.203967] xhci_hcd 0000:02:00.0: @378053b0 00000000 00000000 00000000 00000000
[ 67.203972] xhci_hcd 0000:02:00.0: @378053c0 00000000 00000000 00000000 00000000
[ 67.203977] xhci_hcd 0000:02:00.0: @378053d0 00000000 00000000 00000000 00000000
[ 67.203982] xhci_hcd 0000:02:00.0: @378053e0 00000000 00000000 00000000 00000000
[ 67.203987] xhci_hcd 0000:02:00.0: @378053f0 37805000 00000000 00000000 00001802
[ 67.203992] xhci_hcd 0000:02:00.0: Ring deq = ffff880037805000 (virt), 0x37805000 (dma)
[ 67.203996] xhci_hcd 0000:02:00.0: Ring deq updated 0 times
[ 67.204001] xhci_hcd 0000:02:00.0: Ring enq = ffff880037805000 (virt), 0x37805000 (dma)
[ 67.204005] xhci_hcd 0000:02:00.0: Ring enq updated 0 times
[ 67.204014] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr low bits + flags = @00000000
[ 67.204019] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr high bits = @00000000
[ 68.082822] hub 2-0:1.0: hub_suspend
[ 68.082834] usb usb2: bus auto-suspend
[ 68.082839] usb usb2: bus suspend fail, err -2
[ 68.082843] hub 2-0:1.0: hub_resume
[ 68.082856] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 68.082860] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 68.082873] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 68.082877] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 68.082886] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 68.082891] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 68.082900] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 68.082904] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 68.082923] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 71.081070] hub 2-0:1.0: hub_suspend
[ 71.081081] usb usb2: bus auto-suspend
[ 71.081086] usb usb2: bus suspend fail, err -2
[ 71.081090] hub 2-0:1.0: hub_resume
[ 71.081102] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 71.081106] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 71.081119] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 71.081123] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 71.081133] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 71.081137] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 71.081146] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 71.081151] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 71.081165] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 74.079347] hub 2-0:1.0: hub_suspend
[ 74.079358] usb usb2: bus auto-suspend
[ 74.079363] usb usb2: bus suspend fail, err -2
[ 74.079367] hub 2-0:1.0: hub_resume
[ 74.079379] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 74.079384] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 74.079396] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 74.079400] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 74.079410] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 74.079414] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 74.079423] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 74.079428] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 74.079445] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 77.077541] hub 2-0:1.0: hub_suspend
[ 77.077554] usb usb2: bus auto-suspend
[ 77.077559] usb usb2: bus suspend fail, err -2
[ 77.077563] hub 2-0:1.0: hub_resume
[ 77.077576] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 77.077581] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 77.077593] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 77.077598] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 77.077607] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 77.077611] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 77.077621] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 77.077625] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 77.077639] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 77.845810] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
[ 77.845814] PM: Marking nosave pages: 000000000009b000 - 0000000000100000
[ 77.845819] PM: Marking nosave pages: 00000000bf682000 - 00000000bf6bf000
[ 77.845823] PM: Marking nosave pages: 00000000bf75c000 - 00000000bf7bf000
[ 77.845828] PM: Marking nosave pages: 00000000bf7e4000 - 00000000bf7ff000
[ 77.845831] PM: Marking nosave pages: 00000000bf800000 - 0000000100000000
[ 77.846859] PM: Basic memory bitmaps created
[ 77.846865] PM: Syncing filesystems ... done.
[ 77.997120] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 77.998042] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 77.998269] PM: Preallocating image memory... done (allocated 1936029 pages)
[ 80.480913] PM: Allocated 7744116 kbytes in 2.48 seconds (3122.62 MB/s)
[ 80.480918] Suspending console(s) (use no_console_suspend to debug)
[ 80.707848] hub 2-0:1.0: hub_suspend
[ 80.707853] usb usb2: bus suspend
[ 80.707855] usb usb2: bus suspend fail, err -2
[ 80.707856] hub 2-0:1.0: hub_resume
[ 80.707864] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 80.707866] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 80.707871] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 80.707872] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 80.707877] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 80.707879] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 80.707882] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 80.707884] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 80.707889] pm_op(): usb_dev_freeze+0x0/0x10 returns -2
[ 80.707891] PM: Device usb2 failed to freeze: error -2
[ 81.030959] Registered led device: iwl-phy0::radio
[ 81.030989] Registered led device: iwl-phy0::assoc
[ 81.031016] Registered led device: iwl-phy0::RX
[ 81.031041] Registered led device: iwl-phy0::TX
[ 81.166877] Restarting tasks ...
[ 81.166974] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 81.169743] done.
[ 81.169816] PM: Basic memory bitmaps freed
[ 84.075313] hub 2-0:1.0: hub_suspend
[ 84.075406] usb usb2: bus auto-suspend
[ 84.075412] usb usb2: bus suspend fail, err -2
[ 84.075416] hub 2-0:1.0: hub_resume
[ 84.075429] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 84.075434] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 84.075446] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 84.075450] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 84.075460] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 84.075464] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 84.075474] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 84.075478] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 84.075503] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 87.071724] hub 2-0:1.0: hub_suspend
[ 87.071737] usb usb2: bus auto-suspend
[ 87.071742] usb usb2: bus suspend fail, err -2
[ 87.071746] hub 2-0:1.0: hub_resume
[ 87.071760] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 87.071764] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 87.071777] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 87.071781] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 87.071791] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 87.071795] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 87.071804] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 87.071809] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 87.071823] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 90.070005] hub 2-0:1.0: hub_suspend
[ 90.070018] usb usb2: bus auto-suspend
[ 90.070023] usb usb2: bus suspend fail, err -2
[ 90.070027] hub 2-0:1.0: hub_resume
[ 90.070040] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 90.070045] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 90.070058] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 90.070062] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 90.070072] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 90.070076] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 90.070085] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 90.070090] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 90.070104] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 93.068319] hub 2-0:1.0: hub_suspend
[ 93.068333] usb usb2: bus auto-suspend
[ 93.068340] usb usb2: bus suspend fail, err -2
[ 93.068345] hub 2-0:1.0: hub_resume
[ 93.068360] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 93.068366] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 93.068382] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 93.068388] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 93.068402] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 93.068407] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 93.068416] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 93.068421] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 93.068435] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 96.066532] hub 2-0:1.0: hub_suspend
[ 96.066546] usb usb2: bus auto-suspend
[ 96.066551] usb usb2: bus suspend fail, err -2
[ 96.066555] hub 2-0:1.0: hub_resume
[ 96.066568] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 96.066573] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 96.066586] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 96.066590] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 96.066599] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 96.066604] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 96.066613] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 96.066618] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 96.066632] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 99.064747] hub 2-0:1.0: hub_suspend
[ 99.064760] usb usb2: bus auto-suspend
[ 99.064766] usb usb2: bus suspend fail, err -2
[ 99.064770] hub 2-0:1.0: hub_resume
[ 99.064783] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 99.064787] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 99.064800] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 99.064804] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 99.064814] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 99.064818] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 99.064828] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 99.064832] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 99.064842] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 102.063026] hub 2-0:1.0: hub_suspend
[ 102.063039] usb usb2: bus auto-suspend
[ 102.063045] usb usb2: bus suspend fail, err -2
[ 102.063049] hub 2-0:1.0: hub_resume
[ 102.063061] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 102.063066] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 102.063079] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 102.063083] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 102.063093] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 102.063097] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 102.063106] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 102.063111] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 102.063125] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 105.061291] hub 2-0:1.0: hub_suspend
[ 105.061304] usb usb2: bus auto-suspend
[ 105.061309] usb usb2: bus suspend fail, err -2
[ 105.061313] hub 2-0:1.0: hub_resume
[ 105.061326] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 105.061331] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 105.061343] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 105.061348] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 105.061357] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 105.061362] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 105.061371] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 105.061375] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 105.061394] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 108.059583] hub 2-0:1.0: hub_suspend
[ 108.059596] usb usb2: bus auto-suspend
[ 108.059601] usb usb2: bus suspend fail, err -2
[ 108.059605] hub 2-0:1.0: hub_resume
[ 108.059619] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 108.059623] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 108.059636] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 108.059640] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 108.059650] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 108.059654] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 108.059664] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 108.059668] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 108.059688] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 111.063393] hub 2-0:1.0: hub_suspend
[ 111.063406] usb usb2: bus auto-suspend
[ 111.063411] usb usb2: bus suspend fail, err -2
[ 111.063415] hub 2-0:1.0: hub_resume
[ 111.063428] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 111.063433] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 111.063446] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 111.063450] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 111.063460] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 111.063464] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 111.063474] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 111.063478] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 111.063491] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 114.056721] hub 2-0:1.0: hub_suspend
[ 114.056734] usb usb2: bus auto-suspend
[ 114.056739] usb usb2: bus suspend fail, err -2
[ 114.056743] hub 2-0:1.0: hub_resume
[ 114.056756] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 114.056761] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 114.056773] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 114.056777] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 114.056787] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 114.056791] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 114.056801] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 114.056805] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 114.056817] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 117.054315] hub 2-0:1.0: hub_suspend
[ 117.054328] usb usb2: bus auto-suspend
[ 117.054333] usb usb2: bus suspend fail, err -2
[ 117.054337] hub 2-0:1.0: hub_resume
[ 117.054350] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 117.054355] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 117.054368] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 117.054372] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 117.054382] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 117.054386] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 117.054395] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 117.054400] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 117.054417] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 120.052674] hub 2-0:1.0: hub_suspend
[ 120.052687] usb usb2: bus auto-suspend
[ 120.052692] usb usb2: bus suspend fail, err -2
[ 120.052696] hub 2-0:1.0: hub_resume
[ 120.052710] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 120.052714] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 120.052727] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 120.052731] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 120.052741] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 120.052745] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 120.052754] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 120.052759] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 120.052772] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 123.050916] hub 2-0:1.0: hub_suspend
[ 123.050927] usb usb2: bus auto-suspend
[ 123.050932] usb usb2: bus suspend fail, err -2
[ 123.050936] hub 2-0:1.0: hub_resume
[ 123.050948] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 123.050953] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 123.050965] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 123.050969] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 123.050979] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 123.050983] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 123.050992] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 123.050997] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 123.051011] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 126.049101] hub 2-0:1.0: hub_suspend
[ 126.049112] usb usb2: bus auto-suspend
[ 126.049116] usb usb2: bus suspend fail, err -2
[ 126.049120] hub 2-0:1.0: hub_resume
[ 126.049132] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 126.049137] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 126.049149] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 126.049153] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 126.049163] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 126.049167] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 126.049176] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 126.049181] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 126.049195] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread