* Re: IOMMU issue on HP DL385g7 servers - workaround_bogus_bios / workaround_bug_bios doesn't help
2011-07-14 16:27 ` Wei Wang2
@ 2011-07-15 15:40 ` Mark Schneider
0 siblings, 0 replies; 6+ messages in thread
From: Mark Schneider @ 2011-07-15 15:40 UTC (permalink / raw)
To: Wei Wang2; +Cc: xen-devel, ms, Konrad Rzeszutek Wilk
[-- Attachment #1: Type: text/plain, Size: 5005 bytes --]
Am 14.07.2011 18:27, schrieb Wei Wang2:
> Wednesday 13 July 2011 16:05:54 Mark Schneider wrote:
>
> I have cretaed wheezy xen 4.1 debian live image (s. the link below to
> it) but even I tried different boot options like "iommu=1 |
> workaround_bios_bug | workaround_bogus_bios" I am getting such entry
> "(XEN) AMD-Vi: IOMMU not found!" in the log (s. for more details in
> http://www.it-infrastrukturen.com/fileadmin/linux/paste/xm_dmesg.xen41_on_D
> L385g7_NOK.txt )
>
> link to xen 4.0 (squeeze) and xen 4.1 (wheezy) debian live images -
> http://www.it-infrastrukturen.com/fileadmin/linux/debian-live-xen/README.xe
> n
>
> do you have any idea how to solve this issue? - thank you in advance for
> any hints (different one than killing the hardware vendor (HP) ;) ...
> for the missing IOMMU BIOS option
>
> Linux xen41dom0 2.6.39-2-amd64 #1 SMP Wed Jun 8 11:01:04 UTC 2011 x86_64
> GNU/Linux
>
> Thank you in advance for any hints.
>
> Regards, Mark
>
> Hi,
> workaround_bios_bug and workaround_bogus_bios only works for vtd not amd.
> You should have IVRS table build by BIOS to enable amd iommu. It could look
> like this:
> (XEN) ACPI: IVRS AFE7C1ED, 00C8 (r1 AMD RD890S 6040000 AMD 0)
> Thanks,
> Wei
>
Thanks a lot for your hints Wei.
All ACPI entries I see in "xm dmesg" are only like below. I didn't find
any IVRS entry
# --
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bfc1c000 (usable)
(XEN) 00000000bfc1c000 - 00000000bfc4c000 (ACPI data)
(XEN) 00000000bfc4c000 - 00000000bfc4d000 (usable)
(XEN) 00000000bfc4d000 - 00000000d0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fee10000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000043ffff000 (usable)
(XEN) ACPI: RSDP 000F4EE0, 0024 (r2 HP )
(XEN) ACPI: XSDT BFC1D3C0, 00A4 (r1 HP ProLiant 2 Ò^D 162E)
(XEN) ACPI: FACP BFC1D4C0, 00F4 (r3 HP ProLiant 2 Ò^D 162E)
(XEN) ACPI: DSDT BFC1D5C0, CCBB (r1 HP DSDT 1 INTL 20061109)
(XEN) ACPI: FACS BFC1C140, 0040
(XEN) ACPI: SPCR BFC1C180, 0050 (r1 HP SPCRRBSU 1 Ò^D 162E)
(XEN) ACPI: MCFG BFC1C200, 003C (r1 HP ProLiant 1 0)
(XEN) ACPI: HPET BFC1C240, 0038 (r1 HP ProLiant 2 Ò^D 162E)
(XEN) ACPI: SPMI BFC1C280, 0040 (r5 HP ProLiant 1 Ò^D 162E)
(XEN) ACPI: ERST BFC1C2C0, 01D0 (r1 HP ProLiant 1 Ò^D 162E)
(XEN) ACPI: APIC BFC1C4C0, 011E (r1 HP ProLiant 2 0)
(XEN) ACPI: SRAT BFC1C7C0, 02A0 (r2 AMD F10 1 AMD 1)
(XEN) ACPI: FFFF BFC1CFC0, 0176 (r1 HP ProLiant 1 Ò^D 162E)
(XEN) ACPI: BERT BFC1D140, 0030 (r1 HP ProLiant 1 Ò^D 162E)
(XEN) ACPI: HEST BFC1D180, 018C (r1 HP ProLiant 1 Ò^D 162E)
(XEN) ACPI: FFFF BFC1D340, 0064 (r2 HP ProLiant 2 Ò^D 162E)
(XEN) ACPI: SSDT BFC2A280, 0126 (r3 HP PCIE1X8 2 INTL 20090625)
(XEN) ACPI: SSDT BFC2A3C0, 024A (r3 HP PCIE2N3X 2 INTL 20090625)
(XEN) ACPI: SSDT BFC2A640, 0125 (r3 HP CRSPCI0 2 HP 1)
(XEN) ACPI: SSDT BFC2A780, 0377 (r1 HP pmab 1 INTL 20090625)
.
.
(XEN) Initing memory sharing.
(XEN) AMD-Vi: IOMMU not found!
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Supported advanced features:
(XEN) - Nested Page Tables (NPT)
(XEN) - Last Branch Record (LBR) Virtualisation
(XEN) - Next-RIP Saved on #VMEXIT
(XEN) - Pause-Intercept Filter
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 24 CPUs
(XEN) Xenoprofile: AMD IBS detected (0x0000001f)
# ---
It looks like HP DL385g7 BIOS doesn't offer such IVRS table. Maybe there
is a kind of workaround to use the IOMMU support (890FX chipset / 6176SE
CPUs support it) as it is required for "passing through" PCI devices to
domu domains.
I have tested xen enabled kernels 2.6.32-5, 2.6.39-2 and 3.0.0-rc7 (with
aufs support)
# ---
root@xen41dom0:~# uname -a
Linux xen41dom0 3.0.0-rc7 #2 SMP Fri Jul 15 02:10:42 CEST 2011 x86_64
GNU/Linux
I will upload today the last test xen live iso image (s. below) for
downloads.
(xen41-wheezy-kernel3-amd64-live-gnome-binary-hybrid.iso)
Please take a look for details at:
http://www.it-infrastrukturen.com/fileadmin/linux/debian-live-xen/README.xen
In the (selfmade) used kernel 3.0.0-rc7 packages I have activated
IOMMU-debugging however I have to look for a debug howto.
Thank you in advance for your time.
Regards,
Mark
--
ms@it-infrastrukturen.org
[-- Attachment #2: xm_dmesg.boot --]
[-- Type: application/octet-stream, Size: 11770 bytes --]
[-- Attachment #3: dmesg.boot --]
[-- Type: text/plain, Size: 125265 bytes --]
cut here ]------------
[ 0.057527] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.057527] Hardware name: ProLiant DL385 G7
[ 0.057527] Modules linked in:
[ 0.057527] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.057527] Call Trace:
[ 0.057527] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.057527] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.057527] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.057527] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.057527] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.057527] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.057527] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.057527] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.057527] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.057527] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.057527] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.057527] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.057527] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.057527] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.057527] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.057527] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.057527] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.057527] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.057527] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.057527] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.057527] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.057527] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.057527] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.057527] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.057527] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.057527] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.057527] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.057527] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.057527] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.057527] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.057527] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.057527] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.057527] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.057527] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.057527] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.057527] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.057527] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.057527] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.057527] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.057527] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.057527] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.057527] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.057527] ---[ end trace a7919e7f17c0a72d ]---
[ 0.058614] installing Xen timer for CPU 8
[ 0.058937] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.058897] ------------[ cut here ]------------
[ 0.058897] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.058897] Hardware name: ProLiant DL385 G7
[ 0.058897] Modules linked in:
[ 0.058897] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.058897] Call Trace:
[ 0.058897] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.058897] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.058897] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.058897] [<ffffffff810259e0>] ? pvclock_clocksource_read+0x42/0xb2
[ 0.058897] [<ffffffff810a49a5>] ? arch_local_save_flags+0x7/0x8
[ 0.058897] [<ffffffff810a9032>] ? perf_event_task_tick+0x23/0x1bf
[ 0.058897] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.058897] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.058897] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.058897] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.058897] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.058897] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.058897] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.058897] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.058897] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.058897] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.058897] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.058897] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.058897] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.058897] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.058897] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.058897] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.058897] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.058897] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.058897] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.058897] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.058897] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.058897] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.058897] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.058897] ---[ end trace a7919e7f17c0a72e ]---
[ 0.059758] installing Xen timer for CPU 9
[ 0.060015] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060028] ------------[ cut here ]------------
[ 0.060060] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.060074] Hardware name: ProLiant DL385 G7
[ 0.060083] Modules linked in:
[ 0.060097] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.060108] Call Trace:
[ 0.060117] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.060149] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.060167] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.060186] [<ffffffff810259e0>] ? pvclock_clocksource_read+0x42/0xb2
[ 0.060204] [<ffffffff810a49a5>] ? arch_local_save_flags+0x7/0x8
[ 0.060220] [<ffffffff810a9032>] ? perf_event_task_tick+0x23/0x1bf
[ 0.060236] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.060251] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.060268] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.060284] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.060300] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.060316] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.060333] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.060352] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.060370] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.060386] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.060401] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.060418] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.060434] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.060452] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.060469] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.060487] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.060497] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.060523] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.060540] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.060556] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.060573] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.060589] [<ffffffff81067713>] ? arch_local_irq_enable+0x7/0x8
[ 0.060605] [<ffffffff81008284>] ? cpu_idle+0xd0/0xd7
[ 0.060621] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.060634] ---[ end trace a7919e7f17c0a72f ]---
[ 0.060862] installing Xen timer for CPU 10
[ 0.061180] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.061141] ------------[ cut here ]------------
[ 0.061141] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.061141] Hardware name: ProLiant DL385 G7
[ 0.061141] Modules linked in:
[ 0.061141] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.061141] Call Trace:
[ 0.061141] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.061141] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.061141] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.061141] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.061141] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.061141] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.061141] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.061141] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.061141] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.061141] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.061141] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.061141] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.061141] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.061141] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.061141] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.061141] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.061141] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.061141] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.061141] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.061141] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.061141] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.061141] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.061141] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.061141] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.061141] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.061141] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.061141] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.061141] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.061141] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.061141] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.061141] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.061141] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.061141] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.061141] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.061141] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.061141] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.061141] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.061141] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.061141] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.061141] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.061141] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.061141] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.061141] ---[ end trace a7919e7f17c0a730 ]---
[ 0.062209] installing Xen timer for CPU 11
[ 0.062526] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.062487] ------------[ cut here ]------------
[ 0.062487] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.062487] Hardware name: ProLiant DL385 G7
[ 0.062487] Modules linked in:
[ 0.062487] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.062487] Call Trace:
[ 0.062487] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.062487] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.062487] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.062487] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.062487] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.062487] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.062487] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.062487] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.062487] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.062487] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.062487] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.062487] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.062487] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.062487] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.062487] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.062487] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.062487] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.062487] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.062487] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.062487] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.062487] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.062487] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.062487] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.062487] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.062487] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.062487] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.062487] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.062487] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.062487] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.062487] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.062487] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.062487] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.062487] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.062487] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.062487] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.062487] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.062487] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.062487] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.062487] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.062487] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.062487] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.062487] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.062487] ---[ end trace a7919e7f17c0a731 ]---
[ 0.063569] installing Xen timer for CPU 12
[ 0.064046] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064081] ------------[ cut here ]------------
[ 0.064121] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.064136] Hardware name: ProLiant DL385 G7
[ 0.064145] Modules linked in:
[ 0.064162] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.064173] Call Trace:
[ 0.064182] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.064220] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.064239] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.064259] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.064275] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.064293] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.064310] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.064327] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.064343] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.064362] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.064382] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.064402] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.064421] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.064435] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.064453] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.064469] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.064487] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.064505] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.064526] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.064543] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.064559] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.064576] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.064593] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.064610] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.064628] [<ffffffff81046a7a>] ? arch_local_irq_enable+0x7/0x8
[ 0.064645] [<ffffffff81047653>] ? __do_softirq+0x5a/0x178
[ 0.064660] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.064677] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.064693] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.064709] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.064724] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.064741] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.064751] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.064776] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.064793] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.064810] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.064827] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.064845] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.064861] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.064873] ---[ end trace a7919e7f17c0a732 ]---
[ 0.065077] installing Xen timer for CPU 13
[ 0.065580] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.065535] ------------[ cut here ]------------
[ 0.065535] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.065535] Hardware name: ProLiant DL385 G7
[ 0.065535] Modules linked in:
[ 0.065535] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.065535] Call Trace:
[ 0.065535] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.065535] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.065535] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.065535] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.065535] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.065535] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.065535] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.065535] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.065535] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.065535] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.065535] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.065535] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.065535] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.065535] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.065535] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.065535] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.065535] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.065535] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.065535] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.065535] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.065535] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.065535] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.065535] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.065535] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.065535] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.065535] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.065535] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.065535] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.065535] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.065535] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.065535] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.065535] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.065535] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.065535] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.065535] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.065535] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.065535] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.065535] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.065535] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.065535] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.065535] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.065535] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.065535] ---[ end trace a7919e7f17c0a733 ]---
[ 0.066620] installing Xen timer for CPU 14
[ 0.067124] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.067076] ------------[ cut here ]------------
[ 0.067076] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.067076] Hardware name: ProLiant DL385 G7
[ 0.067076] Modules linked in:
[ 0.067076] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.067076] Call Trace:
[ 0.067076] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.067076] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.067076] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.067076] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.067076] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.067076] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.067076] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.067076] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.067076] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.067076] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.067076] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.067076] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.067076] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.067076] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.067076] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.067076] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.067076] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.067076] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.067076] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.067076] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.067076] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.067076] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.067076] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.067076] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.067076] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.067076] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.067076] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.067076] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.067076] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.067076] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.067076] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.067076] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.067076] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.067076] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.067076] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.067076] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.067076] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.067076] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.067076] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.067076] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.067076] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.067076] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.067076] ---[ end trace a7919e7f17c0a734 ]---
[ 0.068131] installing Xen timer for CPU 15
[ 0.068673] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068629] ------------[ cut here ]------------
[ 0.068629] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.068629] Hardware name: ProLiant DL385 G7
[ 0.068629] Modules linked in:
[ 0.068629] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.068629] Call Trace:
[ 0.068629] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.068629] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.068629] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.068629] [<ffffffff810259e0>] ? pvclock_clocksource_read+0x42/0xb2
[ 0.068629] [<ffffffff810a49a5>] ? arch_local_save_flags+0x7/0x8
[ 0.068629] [<ffffffff810a9032>] ? perf_event_task_tick+0x23/0x1bf
[ 0.068629] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.068629] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.068629] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.068629] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.068629] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.068629] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.068629] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.068629] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.068629] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.068629] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.068629] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.068629] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.068629] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.068629] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.068629] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.068629] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.068629] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.068629] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.068629] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.068629] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.068633] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.068650] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.068666] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.068678] ---[ end trace a7919e7f17c0a735 ]---
[ 0.069512] installing Xen timer for CPU 16
[ 0.070025] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.069980] ------------[ cut here ]------------
[ 0.069980] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.069980] Hardware name: ProLiant DL385 G7
[ 0.069980] Modules linked in:
[ 0.069980] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.069980] Call Trace:
[ 0.069980] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.069980] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.069980] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.069980] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.069980] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.069980] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.069980] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.069980] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.069980] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.069980] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.069980] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.069980] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.069980] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.069980] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.069980] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.069980] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.069980] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.069980] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.069980] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.069980] [<ffffffff810062a8>] ? xen_restore_fl_direct+0x18/0x1b
[ 0.069980] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.069980] [<ffffffff8108e14f>] ? check_for_new_grace_period.isra.27+0x99/0xa5
[ 0.069980] [<ffffffff8108e494>] ? __rcu_process_callbacks+0x72/0x2a9
[ 0.069980] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.069980] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.069980] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.069980] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.069980] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.069980] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.069980] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.069980] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.069980] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.069980] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.069980] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.069980] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.069980] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.069980] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.069980] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.069980] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.069980] ---[ end trace a7919e7f17c0a736 ]---
[ 0.071015] installing Xen timer for CPU 17
[ 0.071522] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.071478] ------------[ cut here ]------------
[ 0.071478] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.071478] Hardware name: ProLiant DL385 G7
[ 0.071478] Modules linked in:
[ 0.071478] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.071478] Call Trace:
[ 0.071478] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.071478] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.071478] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.071478] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.071478] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.071478] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.071478] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.071478] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.071478] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.071478] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.071478] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.071478] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.071478] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.071478] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.071478] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.071478] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.071478] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.071478] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.071478] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.071478] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.071478] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.071478] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.071478] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.071478] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.071478] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.071478] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.071478] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.071478] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.071478] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.071478] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.071478] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.071478] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.071478] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.071478] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.071478] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.071478] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.071478] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.071478] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.071478] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.071478] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.071478] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.071478] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.071478] ---[ end trace a7919e7f17c0a737 ]---
[ 0.072498] installing Xen timer for CPU 18
[ 0.073058] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.073005] ------------[ cut here ]------------
[ 0.073005] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.073005] Hardware name: ProLiant DL385 G7
[ 0.073005] Modules linked in:
[ 0.073005] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.073005] Call Trace:
[ 0.073005] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.073005] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.073005] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.073005] [<ffffffff810259e0>] ? pvclock_clocksource_read+0x42/0xb2
[ 0.073005] [<ffffffff810a49a5>] ? arch_local_save_flags+0x7/0x8
[ 0.073005] [<ffffffff810a9032>] ? perf_event_task_tick+0x23/0x1bf
[ 0.073005] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.073005] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.073005] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.073005] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.073005] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.073005] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.073005] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.073005] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.073005] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.073005] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.073005] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.073005] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.073005] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.073005] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.073005] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.073005] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.073005] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.073005] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.073005] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.073005] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.073005] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.073005] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.073005] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.073005] ---[ end trace a7919e7f17c0a738 ]---
[ 0.073935] installing Xen timer for CPU 19
[ 0.074448] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.074404] ------------[ cut here ]------------
[ 0.074404] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.074404] Hardware name: ProLiant DL385 G7
[ 0.074404] Modules linked in:
[ 0.074404] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.074404] Call Trace:
[ 0.074404] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.074404] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.074404] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.074404] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.074404] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.074404] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.074404] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.074404] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.074404] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.074404] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.074404] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.074404] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.074404] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.074404] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.074404] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.074404] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.074404] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.074404] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.074404] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.074404] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.074404] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.074404] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.074404] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.074404] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.074404] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.074404] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.074404] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.074404] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.074404] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.074404] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.074404] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.074404] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.074404] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.074404] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.074404] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.074404] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.074404] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.074404] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.074404] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.074404] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.074404] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.074404] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.074404] ---[ end trace a7919e7f17c0a739 ]---
[ 0.075508] installing Xen timer for CPU 20
[ 0.076004] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.075967] ------------[ cut here ]------------
[ 0.075967] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.075967] Hardware name: ProLiant DL385 G7
[ 0.075967] Modules linked in:
[ 0.075967] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.075967] Call Trace:
[ 0.075967] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.075967] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.075967] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.075967] [<ffffffff810259e0>] ? pvclock_clocksource_read+0x42/0xb2
[ 0.075967] [<ffffffff810a49a5>] ? arch_local_save_flags+0x7/0x8
[ 0.075967] [<ffffffff810a9032>] ? perf_event_task_tick+0x23/0x1bf
[ 0.075967] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.075967] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.075967] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.075967] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.075967] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.075967] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.075967] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.075967] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.075967] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.075967] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.075967] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.075967] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.075967] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.075967] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.075967] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.075967] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.075967] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.075967] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.075967] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.075967] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.075967] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.075967] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.075967] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.075967] ---[ end trace a7919e7f17c0a73a ]---
[ 0.076785] installing Xen timer for CPU 21
[ 0.077291] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.077247] ------------[ cut here ]------------
[ 0.077247] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.077247] Hardware name: ProLiant DL385 G7
[ 0.077247] Modules linked in:
[ 0.077247] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.077247] Call Trace:
[ 0.077247] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.077247] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.077247] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.077247] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.077247] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.077247] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.077247] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.077247] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.077247] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.077247] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.077247] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.077247] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.077247] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.077247] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.077247] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.077247] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.077247] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.077247] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.077247] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.077247] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.077247] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.077247] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.077247] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.077247] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.077247] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.077247] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.077247] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.077247] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.077247] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.077247] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.077247] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.077247] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.077247] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.077247] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.077247] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.077247] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.077247] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.077247] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.077247] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.077247] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.077247] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.077247] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.077247] ---[ end trace a7919e7f17c0a73b ]---
[ 0.078338] installing Xen timer for CPU 22
[ 0.078881] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.078837] ------------[ cut here ]------------
[ 0.078837] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.078837] Hardware name: ProLiant DL385 G7
[ 0.078837] Modules linked in:
[ 0.078837] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.078837] Call Trace:
[ 0.078837] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.078837] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.078837] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.078837] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.078837] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.078837] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.078837] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.078837] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.078837] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.078837] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.078837] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.078837] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.078837] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.078837] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.078837] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.078837] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.078837] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.078837] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.078837] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.078837] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.078837] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.078837] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.078837] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.078837] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.078837] [<ffffffff8108daa3>] ? arch_local_irq_restore+0x7/0x8
[ 0.078837] [<ffffffff8108e485>] ? __rcu_process_callbacks+0x63/0x2a9
[ 0.078837] [<ffffffff8108a7c8>] ? handle_irq_event_percpu+0x162/0x180
[ 0.078837] [<ffffffff8108f1ce>] ? rcu_process_callbacks+0x3c/0x7e
[ 0.078837] [<ffffffff810476b3>] ? __do_softirq+0xba/0x178
[ 0.078837] [<ffffffff811ff3f0>] ? __xen_evtchn_do_upcall+0x1b5/0x1f2
[ 0.078837] [<ffffffff8133e69c>] ? call_softirq+0x1c/0x30
[ 0.078837] [<ffffffff8100a86d>] ? do_softirq+0x3c/0x7b
[ 0.078837] [<ffffffff8104791b>] ? irq_exit+0x3c/0x86
[ 0.078837] [<ffffffff8120087c>] ? xen_evtchn_do_upcall+0x27/0x32
[ 0.078837] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.078837] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.078837] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.078837] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.078837] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.078837] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.078837] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.078837] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.078837] ---[ end trace a7919e7f17c0a73c ]---
[ 0.079922] installing Xen timer for CPU 23
[ 0.080370] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.080327] ------------[ cut here ]------------
[ 0.080327] WARNING: at arch/x86/xen/enlighten.c:732 x86_pmu_enable+0x19f/0x21b()
[ 0.080327] Hardware name: ProLiant DL385 G7
[ 0.080327] Modules linked in:
[ 0.080327] Pid: 0, comm: swapper Tainted: G W 3.0.0-rc7 #2
[ 0.080327] Call Trace:
[ 0.080327] <IRQ> [<ffffffff8104219d>] ? warn_slowpath_common+0x78/0x8c
[ 0.080327] [<ffffffff81017542>] ? x86_pmu_enable+0x19f/0x21b
[ 0.080327] [<ffffffff8101422b>] ? x86_pmu_commit_txn+0x7b/0x8d
[ 0.080327] [<ffffffff810259e0>] ? pvclock_clocksource_read+0x42/0xb2
[ 0.080327] [<ffffffff810a49a5>] ? arch_local_save_flags+0x7/0x8
[ 0.080327] [<ffffffff810a9032>] ? perf_event_task_tick+0x23/0x1bf
[ 0.080327] [<ffffffff810a89be>] ? event_sched_in+0x78/0xed
[ 0.080327] [<ffffffff810a8ab5>] ? group_sched_in+0x82/0x130
[ 0.080327] [<ffffffff810062af>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 0.080338] [<ffffffff8105f797>] ? arch_local_irq_restore+0x7/0x8
[ 0.080355] [<ffffffff810a8ed8>] ? __perf_event_enable+0xc1/0x10b
[ 0.080371] [<ffffffff810a6c2d>] ? remote_function+0x34/0x39
[ 0.080388] [<ffffffff8106c422>] ? generic_smp_call_function_single_interrupt+0xc6/0xe7
[ 0.080407] [<ffffffff81006fa0>] ? xen_call_function_single_interrupt+0xb/0x20
[ 0.080427] [<ffffffff8108a6b6>] ? handle_irq_event_percpu+0x50/0x180
[ 0.080443] [<ffffffff811ff5c3>] ? disable_pirq+0x2/0x2
[ 0.080458] [<ffffffff811ff439>] ? info_for_irq+0x7/0x17
[ 0.080475] [<ffffffff8108c6f1>] ? handle_percpu_irq+0x37/0x4c
[ 0.080491] [<ffffffff811ff392>] ? __xen_evtchn_do_upcall+0x157/0x1f2
[ 0.080508] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.080525] [<ffffffff81200877>] ? xen_evtchn_do_upcall+0x22/0x32
[ 0.080543] [<ffffffff8133e6ee>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 0.080554] <EOI> [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.080579] [<ffffffff8100122a>] ? hypercall_page+0x22a/0x1000
[ 0.080597] [<ffffffff81005d88>] ? xen_force_evtchn_callback+0x9/0xa
[ 0.080614] [<ffffffff810062c2>] ? check_events+0x12/0x20
[ 0.080631] [<ffffffff81006269>] ? xen_irq_enable_direct_reloc+0x4/0x4
[ 0.080647] [<ffffffff813254d7>] ? cpu_bringup+0x6e/0x73
[ 0.080663] [<ffffffff81325851>] ? cpu_bringup_and_idle+0x7/0xe
[ 0.080676] ---[ end trace a7919e7f17c0a73d ]---
[ 0.081054] Brought up 24 CPUs
[ 0.081542] devtmpfs: initialized
[ 0.087582] Grant table initialized
[ 0.088026] print_constraints: dummy:
[ 0.088518] NET: Registered protocol family 16
[ 0.088676] Unpacking initramfs...
[ 0.104583] node 0 link 3: io port [1000, ffff]
[ 0.104592] TOM: 00000000c0000000 aka 3072M
[ 0.104601] Fam 10h mmconf [c0000000, cfffffff]
[ 0.104605] node 0 link 3: mmio [e7f00000, fdffffff]
[ 0.104613] node 0 link 3: mmio [c0000000, cff0ffff] ==> none
[ 0.104620] TOM2: 0000000440000000 aka 17408M
[ 0.104624] bus: [00, 3f] on node 0 link 3
[ 0.104628] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.104631] bus: 00 index 1 [mem 0xd0000000-0xffffffff]
[ 0.104634] bus: 00 index 2 [mem 0x440000000-0xfcffffffff]
[ 0.104653] Extended Config Space enabled on 4 nodes
[ 0.105521] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.105528] ACPI: bus type pci registered
[ 0.105644] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.105651] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 0.230691] PCI: Using configuration type 1 for base access
[ 0.249624] bio: create slab <bio-0> at 0
[ 0.256085] ACPI: EC: Look up EC in DSDT
[ 0.257136] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110413/dsopcode-236)
[ 0.257150] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff880042cf1fb0), AE_AML_BUFFER_LIMIT (20110413/psparse-536)
[ 0.356286] ACPI: Interpreter enabled
[ 0.356301] ACPI: (supports S0 S4 S5)
[ 0.356339] ACPI: Using IOAPIC for interrupt routing
[ 0.418384] ACPI: No dock devices found.
[ 0.418431] HEST: Table parsing has been initialized.
[ 0.418438] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.418480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.418569] pci_root PNP0A08:00: host bridge window [mem 0xe7f00000-0xfdffffff]
[ 0.418576] pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
[ 0.418581] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.418586] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.418591] pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
[ 0.418596] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff]
[ 0.418601] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed44fff]
[ 0.418607] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
[ 0.418611] pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
[ 0.418616] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.418623] pci_root PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored
[ 0.418667] pci 0000:00:00.0: [1002:5a10] type 0 class 0x000600
[ 0.418819] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
[ 0.418896] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.418903] pci 0000:00:04.0: PME# disabled
[ 0.418942] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604
[ 0.419017] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.419023] pci 0000:00:06.0: PME# disabled
[ 0.419065] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
[ 0.419140] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.419146] pci 0000:00:0a.0: PME# disabled
[ 0.419183] pci 0000:00:0b.0: [1002:5a1f] type 1 class 0x000604
[ 0.419257] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.419262] pci 0000:00:0b.0: PME# disabled
[ 0.419301] pci 0000:00:0d.0: [1002:5a1e] type 1 class 0x000604
[ 0.419375] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 0.419381] pci 0000:00:0d.0: PME# disabled
[ 0.419430] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.419463] pci 0000:00:11.0: reg 10: [io 0x1000-0x1007]
[ 0.419481] pci 0000:00:11.0: reg 14: [io 0x1008-0x100b]
[ 0.419497] pci 0000:00:11.0: reg 18: [io 0x1010-0x1017]
[ 0.419515] pci 0000:00:11.0: reg 1c: [io 0x1018-0x101b]
[ 0.419532] pci 0000:00:11.0: reg 20: [io 0x1020-0x102f]
[ 0.419549] pci 0000:00:11.0: reg 24: [mem 0xf38f0000-0xf38f03ff]
[ 0.419584] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.419645] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.419668] pci 0000:00:12.0: reg 10: [mem 0xf38e0000-0xf38e0fff]
[ 0.419778] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.419801] pci 0000:00:12.1: reg 10: [mem 0xf38d0000-0xf38d0fff]
[ 0.419921] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.419953] pci 0000:00:12.2: reg 10: [mem 0xf38c0000-0xf38c00ff]
[ 0.420025] pci 0000:00:12.2: supports D1 D2
[ 0.420025] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.420025] pci 0000:00:12.2: PME# disabled
[ 0.420059] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.420083] pci 0000:00:13.0: reg 10: [mem 0xf38b0000-0xf38b0fff]
[ 0.420195] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.420218] pci 0000:00:13.1: reg 10: [mem 0xf38a0000-0xf38a0fff]
[ 0.420338] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.420371] pci 0000:00:13.2: reg 10: [mem 0xf3890000-0xf38900ff]
[ 0.420490] pci 0000:00:13.2: supports D1 D2
[ 0.420493] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.420500] pci 0000:00:13.2: PME# disabled
[ 0.420543] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.420704] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.420733] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
[ 0.420750] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
[ 0.420767] pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
[ 0.420783] pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
[ 0.420800] pci 0000:00:14.1: reg 20: [io 0x0500-0x050f]
[ 0.420882] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.421011] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.421100] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.421190] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.421247] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.421302] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.421367] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.421430] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
[ 0.421514] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
[ 0.421568] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
[ 0.421626] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
[ 0.421693] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
[ 0.421758] pci 0000:00:1a.0: [1022:1200] type 0 class 0x000600
[ 0.421843] pci 0000:00:1a.1: [1022:1201] type 0 class 0x000600
[ 0.421896] pci 0000:00:1a.2: [1022:1202] type 0 class 0x000600
[ 0.421953] pci 0000:00:1a.3: [1022:1203] type 0 class 0x000600
[ 0.422019] pci 0000:00:1a.4: [1022:1204] type 0 class 0x000600
[ 0.422087] pci 0000:00:1b.0: [1022:1200] type 0 class 0x000600
[ 0.422180] pci 0000:00:1b.1: [1022:1201] type 0 class 0x000600
[ 0.422234] pci 0000:00:1b.2: [1022:1202] type 0 class 0x000600
[ 0.422291] pci 0000:00:1b.3: [1022:1203] type 0 class 0x000600
[ 0.422361] pci 0000:00:1b.4: [1022:1204] type 0 class 0x000600
[ 0.422521] pci 0000:04:00.0: [14e4:1639] type 0 class 0x000200
[ 0.422548] pci 0000:04:00.0: reg 10: [mem 0xf6000000-0xf7ffffff 64bit]
[ 0.422609] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.422661] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.422667] pci 0000:04:00.0: PME# disabled
[ 0.422718] pci 0000:04:00.1: [14e4:1639] type 0 class 0x000200
[ 0.422744] pci 0000:04:00.1: reg 10: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.422805] pci 0000:04:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.422857] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[ 0.422863] pci 0000:04:00.1: PME# disabled
[ 0.422905] pci 0000:00:04.0: PCI bridge to [bus 04-04]
[ 0.422915] pci 0000:00:04.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.422921] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.422930] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.423022] pci 0000:05:00.0: [14e4:1639] type 0 class 0x000200
[ 0.423048] pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.423109] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.423161] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.423168] pci 0000:05:00.0: PME# disabled
[ 0.423218] pci 0000:05:00.1: [14e4:1639] type 0 class 0x000200
[ 0.423244] pci 0000:05:00.1: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.423305] pci 0000:05:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.423357] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[ 0.423363] pci 0000:05:00.1: PME# disabled
[ 0.423403] pci 0000:00:06.0: PCI bridge to [bus 05-05]
[ 0.423412] pci 0000:00:06.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.423418] pci 0000:00:06.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.423427] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.423515] pci 0000:02:00.0: [103c:3306] type 0 class 0x000880
[ 0.423538] pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.423555] pci 0000:02:00.0: reg 14: [mem 0xf3cf0000-0xf3cf01ff]
[ 0.423572] pci 0000:02:00.0: reg 18: [io 0x3400-0x34ff]
[ 0.423719] pci 0000:02:00.2: [103c:3307] type 0 class 0x000880
[ 0.423741] pci 0000:02:00.2: reg 10: [io 0x3800-0x38ff]
[ 0.423759] pci 0000:02:00.2: reg 14: [mem 0xf3ce0000-0xf3ce00ff]
[ 0.423775] pci 0000:02:00.2: reg 18: [mem 0xf3b00000-0xf3bfffff]
[ 0.423792] pci 0000:02:00.2: reg 1c: [mem 0xf3a80000-0xf3afffff]
[ 0.423809] pci 0000:02:00.2: reg 20: [mem 0xf3a70000-0xf3a77fff]
[ 0.423826] pci 0000:02:00.2: reg 24: [mem 0xf3a60000-0xf3a67fff]
[ 0.423843] pci 0000:02:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.423888] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.423895] pci 0000:02:00.2: PME# disabled
[ 0.423941] pci 0000:02:00.4: [103c:3300] type 0 class 0x000c03
[ 0.424018] pci 0000:02:00.4: reg 20: [io 0x3c00-0x3c1f]
[ 0.440099] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.440116] pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
[ 0.440122] pci 0000:00:0a.0: bridge window [mem 0xf3a00000-0xf3cfffff]
[ 0.440131] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.440224] pci 0000:09:00.0: [10b5:8616] type 1 class 0x000604
[ 0.440246] pci 0000:09:00.0: reg 10: [mem 0xfdfe0000-0xfdffffff]
[ 0.440328] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.440335] pci 0000:09:00.0: PME# disabled
[ 0.440375] pci 0000:00:0b.0: PCI bridge to [bus 09-11]
[ 0.440385] pci 0000:00:0b.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.440391] pci 0000:00:0b.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.440399] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.440496] pci 0000:0a:04.0: [10b5:8616] type 1 class 0x000604
[ 0.440588] pci 0000:0a:04.0: PME# supported from D0 D3hot D3cold
[ 0.440594] pci 0000:0a:04.0: PME# disabled
[ 0.440641] pci 0000:0a:05.0: [10b5:8616] type 1 class 0x000604
[ 0.440733] pci 0000:0a:05.0: PME# supported from D0 D3hot D3cold
[ 0.440739] pci 0000:0a:05.0: PME# disabled
[ 0.440787] pci 0000:0a:06.0: [10b5:8616] type 1 class 0x000604
[ 0.440879] pci 0000:0a:06.0: PME# supported from D0 D3hot D3cold
[ 0.440885] pci 0000:0a:06.0: PME# disabled
[ 0.440950] pci 0000:09:00.0: PCI bridge to [bus 0a-11]
[ 0.440961] pci 0000:09:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.440968] pci 0000:09:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.440977] pci 0000:09:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.441047] pci 0000:0a:04.0: PCI bridge to [bus 0b-0b]
[ 0.441058] pci 0000:0a:04.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.441064] pci 0000:0a:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.441073] pci 0000:0a:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.441146] pci 0000:0a:05.0: PCI bridge to [bus 0c-0e]
[ 0.441156] pci 0000:0a:05.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.441162] pci 0000:0a:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.441172] pci 0000:0a:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.441246] pci 0000:0a:06.0: PCI bridge to [bus 0f-11]
[ 0.441257] pci 0000:0a:06.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.441263] pci 0000:0a:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.441273] pci 0000:0a:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.441384] pci 0000:03:00.0: [103c:323a] type 0 class 0x000104
[ 0.441408] pci 0000:03:00.0: reg 10: [mem 0xf3e00000-0xf3ffffff 64bit]
[ 0.441429] pci 0000:03:00.0: reg 18: [mem 0xf3df0000-0xf3df0fff 64bit]
[ 0.441443] pci 0000:03:00.0: reg 20: [io 0x4000-0x40ff]
[ 0.441467] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.441506] pci 0000:03:00.0: supports D1
[ 0.441509] pci 0000:03:00.0: PME# supported from D0
[ 0.441514] pci 0000:03:00.0: PME# disabled
[ 0.441543] pci 0000:00:0d.0: PCI bridge to [bus 03-03]
[ 0.441552] pci 0000:00:0d.0: bridge window [io 0x4000-0x4fff]
[ 0.441558] pci 0000:00:0d.0: bridge window [mem 0xf3d00000-0xf3ffffff]
[ 0.441566] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.441616] pci 0000:01:03.0: [1002:515e] type 0 class 0x000300
[ 0.441650] pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.441670] pci 0000:01:03.0: reg 14: [io 0x2000-0x20ff]
[ 0.441690] pci 0000:01:03.0: reg 18: [mem 0xf39f0000-0xf39fffff]
[ 0.441758] pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.441795] pci 0000:01:03.0: supports D1 D2
[ 0.441873] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.441881] pci 0000:00:14.4: bridge window [io 0x2000-0x2fff]
[ 0.441888] pci 0000:00:14.4: bridge window [mem 0xf3900000-0xf39fffff]
[ 0.441895] pci 0000:00:14.4: bridge window [mem 0xe8000000-0xefffffff pref]
[ 0.441899] pci 0000:00:14.4: bridge window [mem 0xe7f00000-0xfdffffff] (subtractive decode)
[ 0.441903] pci 0000:00:14.4: bridge window [io 0x1000-0xffff] (subtractive decode)
[ 0.441907] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.441911] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.441914] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff] (subtractive decode)
[ 0.441918] pci 0000:00:14.4: bridge window [mem 0xfed00000-0xfed44fff] (subtractive decode)
[ 0.441922] pci 0000:00:14.4: bridge window [io 0x03b0-0x03bb] (subtractive decode)
[ 0.441926] pci 0000:00:14.4: bridge window [io 0x03c0-0x03df] (subtractive decode)
[ 0.441929] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.441995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.442407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.442482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G12B._PRT]
[ 0.442966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G134._PRT]
[ 0.443046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G136._PRT]
[ 0.443126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G13A._PRT]
[ 0.443218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G13D._PRT]
[ 0.443276] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.443284] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.443289] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.053492] Freeing initrd memory: 403312k freed
[ 1.265646] ACPI: PCI Interrupt Link [I020] (IRQs *24)
[ 1.269410] ACPI: PCI Interrupt Link [I021] (IRQs *25)
[ 1.273218] ACPI: PCI Interrupt Link [I022] (IRQs *26)
[ 1.277053] ACPI: PCI Interrupt Link [I023] (IRQs *27)
[ 1.280791] ACPI: PCI Interrupt Link [I030] (IRQs *28)
[ 1.284593] ACPI: PCI Interrupt Link [I031] (IRQs *29)
[ 1.288079] ACPI: PCI Interrupt Link [I032] (IRQs *30)
[ 1.291910] ACPI: PCI Interrupt Link [I033] (IRQs *31)
[ 1.295698] ACPI: PCI Interrupt Link [I040] (IRQs *44)
[ 1.299535] ACPI: PCI Interrupt Link [I041] (IRQs *45)
[ 1.303434] ACPI: PCI Interrupt Link [I042] (IRQs *46)
[ 1.307367] ACPI: PCI Interrupt Link [I043] (IRQs *47)
[ 1.311353] ACPI: PCI Interrupt Link [I050] (IRQs *51)
[ 1.315200] ACPI: PCI Interrupt Link [I051] (IRQs *48)
[ 1.319089] ACPI: PCI Interrupt Link [I052] (IRQs *49)
[ 1.320081] ACPI: PCI Interrupt Link [I053] (IRQs *50)
[ 1.323912] ACPI: PCI Interrupt Link [I060] (IRQs *48)
[ 1.327841] ACPI: PCI Interrupt Link [I061] (IRQs *49)
[ 1.329376] ACPI: PCI Interrupt Link [I062] (IRQs *50)
[ 1.332082] ACPI: PCI Interrupt Link [I063] (IRQs *51)
[ 1.340139] ACPI: PCI Interrupt Link [I070] (IRQs *47)
[ 1.344040] ACPI: PCI Interrupt Link [I071] (IRQs *44)
[ 1.348026] ACPI: PCI Interrupt Link [I072] (IRQs *45)
[ 1.352070] ACPI: PCI Interrupt Link [I073] (IRQs *46)
[ 1.352774] ACPI: PCI Interrupt Link [I090] (IRQs *24)
[ 1.353481] ACPI: PCI Interrupt Link [I091] (IRQs *24)
[ 1.354186] ACPI: PCI Interrupt Link [I092] (IRQs *24)
[ 1.354892] ACPI: PCI Interrupt Link [I093] (IRQs *24)
[ 1.358929] ACPI: PCI Interrupt Link [I0A0] (IRQs *24)
[ 1.363022] ACPI: PCI Interrupt Link [I0A1] (IRQs *25)
[ 1.367163] ACPI: PCI Interrupt Link [I0A2] (IRQs *26)
[ 1.371345] ACPI: PCI Interrupt Link [I0A3] (IRQs *27)
[ 1.375445] ACPI: PCI Interrupt Link [I0B0] (IRQs *32)
[ 1.379598] ACPI: PCI Interrupt Link [I0B1] (IRQs *33)
[ 1.383783] ACPI: PCI Interrupt Link [I0B2] (IRQs *34)
[ 1.388011] ACPI: PCI Interrupt Link [I0B3] (IRQs *35)
[ 1.392201] ACPI: PCI Interrupt Link [I0C0] (IRQs *36)
[ 1.396384] ACPI: PCI Interrupt Link [I0C1] (IRQs *37)
[ 1.400609] ACPI: PCI Interrupt Link [I0C2] (IRQs *38)
[ 1.404891] ACPI: PCI Interrupt Link [I0C3] (IRQs *39)
[ 1.408087] ACPI: PCI Interrupt Link [I0D0] (IRQs *40)
[ 1.412319] ACPI: PCI Interrupt Link [I0D1] (IRQs *41)
[ 1.416640] ACPI: PCI Interrupt Link [I0D2] (IRQs *42)
[ 1.420962] ACPI: PCI Interrupt Link [I0D3] (IRQs *43)
[ 1.421269] ACPI: PCI Interrupt Link [BI02] (IRQs *52)
[ 1.421625] ACPI: PCI Interrupt Link [BI03] (IRQs *52)
[ 1.422025] ACPI: PCI Interrupt Link [BI04] (IRQs *52)
[ 1.422471] ACPI: PCI Interrupt Link [BI05] (IRQs *52)
[ 1.422964] ACPI: PCI Interrupt Link [BI06] (IRQs *53)
[ 1.423505] ACPI: PCI Interrupt Link [BI07] (IRQs *54)
[ 1.424142] ACPI: PCI Interrupt Link [BI08] (IRQs *54)
[ 1.424780] ACPI: PCI Interrupt Link [BI09] (IRQs *54)
[ 1.425463] ACPI: PCI Interrupt Link [BI0A] (IRQs *24)
[ 1.426194] ACPI: PCI Interrupt Link [BI0B] (IRQs *54)
[ 1.426973] ACPI: PCI Interrupt Link [BI0C] (IRQs *54)
[ 1.427793] ACPI: PCI Interrupt Link [BI0D] (IRQs *54)
[ 1.428124] ACPI: PCI Interrupt Link [PI20] (IRQs 10 11) *0, disabled.
[ 1.428512] ACPI: PCI Interrupt Link [PI21] (IRQs 10 11) *0, disabled.
[ 1.428890] ACPI: PCI Interrupt Link [PI22] (IRQs 10 11) *0, disabled.
[ 1.429275] ACPI: PCI Interrupt Link [PI23] (IRQs 10 11) *0, disabled.
[ 1.429653] ACPI: PCI Interrupt Link [PI30] (IRQs 10 11) *0, disabled.
[ 1.430033] ACPI: PCI Interrupt Link [PI31] (IRQs 10 11) *0, disabled.
[ 1.430419] ACPI: PCI Interrupt Link [PI32] (IRQs 10 11) *0, disabled.
[ 1.430799] ACPI: PCI Interrupt Link [PI33] (IRQs 10 11) *0, disabled.
[ 1.431182] ACPI: PCI Interrupt Link [PI40] (IRQs 10 11) *0, disabled.
[ 1.431568] ACPI: PCI Interrupt Link [PI41] (IRQs 10 11) *0, disabled.
[ 1.431948] ACPI: PCI Interrupt Link [PI42] (IRQs 10 11) *0, disabled.
[ 1.432375] ACPI: PCI Interrupt Link [PI43] (IRQs 10 11) *0, disabled.
[ 1.432757] ACPI: PCI Interrupt Link [PI50] (IRQs 10 11) *0, disabled.
[ 1.433136] ACPI: PCI Interrupt Link [PI51] (IRQs 10 11) *0, disabled.
[ 1.433516] ACPI: PCI Interrupt Link [PI52] (IRQs 10 11) *0, disabled.
[ 1.433895] ACPI: PCI Interrupt Link [PI53] (IRQs 10 11) *0, disabled.
[ 1.434286] ACPI: PCI Interrupt Link [PI60] (IRQs 10 11) *0, disabled.
[ 1.434666] ACPI: PCI Interrupt Link [PI61] (IRQs 10 11) *0, disabled.
[ 1.435045] ACPI: PCI Interrupt Link [PI62] (IRQs 10 11) *0, disabled.
[ 1.435426] ACPI: PCI Interrupt Link [PI63] (IRQs 10 11) *0, disabled.
[ 1.435806] ACPI: PCI Interrupt Link [PI70] (IRQs 10 11) *0, disabled.
[ 1.436234] ACPI: PCI Interrupt Link [PI71] (IRQs 10 11) *0, disabled.
[ 1.436621] ACPI: PCI Interrupt Link [PI72] (IRQs 10 11) *0, disabled.
[ 1.437002] ACPI: PCI Interrupt Link [PI73] (IRQs 10 11) *0, disabled.
[ 1.437384] ACPI: PCI Interrupt Link [PI90] (IRQs 10 11) *0, disabled.
[ 1.437769] ACPI: PCI Interrupt Link [PI91] (IRQs 10 11) *0, disabled.
[ 1.438155] ACPI: PCI Interrupt Link [PI92] (IRQs 10 11) *0, disabled.
[ 1.438545] ACPI: PCI Interrupt Link [PI93] (IRQs 10 11) *0, disabled.
[ 1.438929] ACPI: PCI Interrupt Link [PIA0] (IRQs 10 11) *0, disabled.
[ 1.439334] ACPI: PCI Interrupt Link [PIA1] (IRQs 10 11) *0, disabled.
[ 1.439719] ACPI: PCI Interrupt Link [PIA2] (IRQs 10 11) *0, disabled.
[ 1.440089] ACPI: PCI Interrupt Link [PIA3] (IRQs 10 11) *0, disabled.
[ 1.440408] ACPI: PCI Interrupt Link [PIB0] (IRQs 10 11) *0, disabled.
[ 1.440792] ACPI: PCI Interrupt Link [PIB1] (IRQs 10 11) *0, disabled.
[ 1.441178] ACPI: PCI Interrupt Link [PIB2] (IRQs 10 11) *0, disabled.
[ 1.441569] ACPI: PCI Interrupt Link [PIB3] (IRQs 10 11) *0, disabled.
[ 1.441955] ACPI: PCI Interrupt Link [PIC0] (IRQs 10 11) *0, disabled.
[ 1.442350] ACPI: PCI Interrupt Link [PIC1] (IRQs 10 11) *0, disabled.
[ 1.442735] ACPI: PCI Interrupt Link [PIC2] (IRQs 10 11) *0, disabled.
[ 1.443119] ACPI: PCI Interrupt Link [PIC3] (IRQs 10 11) *0, disabled.
[ 1.443504] ACPI: PCI Interrupt Link [PID0] (IRQs 10 11) *0, disabled.
[ 1.443889] ACPI: PCI Interrupt Link [PID1] (IRQs 10 11) *0, disabled.
[ 1.444317] ACPI: PCI Interrupt Link [PID2] (IRQs 10 11) *0, disabled.
[ 1.444702] ACPI: PCI Interrupt Link [PID3] (IRQs 10 11) *0, disabled.
[ 1.445086] ACPI: PCI Interrupt Link [PIR2] (IRQs 10 11) *0, disabled.
[ 1.445470] ACPI: PCI Interrupt Link [PIR3] (IRQs 10 11) *0, disabled.
[ 1.445858] ACPI: PCI Interrupt Link [PIR4] (IRQs 10 11) *0, disabled.
[ 1.446244] ACPI: PCI Interrupt Link [PIR5] (IRQs 10 11) *0, disabled.
[ 1.446629] ACPI: PCI Interrupt Link [PIR6] (IRQs 10 11) *0, disabled.
[ 1.447013] ACPI: PCI Interrupt Link [PIR7] (IRQs 10 11) *0, disabled.
[ 1.447400] ACPI: PCI Interrupt Link [PIR8] (IRQs 10 11) *0, disabled.
[ 1.447793] ACPI: PCI Interrupt Link [PIR9] (IRQs 10 11) *0, disabled.
[ 1.448231] ACPI: PCI Interrupt Link [PIRA] (IRQs 10 11) *0, disabled.
[ 1.448621] ACPI: PCI Interrupt Link [PIRB] (IRQs 10 11) *0, disabled.
[ 1.449012] ACPI: PCI Interrupt Link [PIRC] (IRQs 10 11) *0, disabled.
[ 1.449400] ACPI: PCI Interrupt Link [PIRD] (IRQs 10 11) *0, disabled.
[ 1.449856] ACPI: PCI Interrupt Link [USB1] (IRQs *22)
[ 1.450239] ACPI: PCI Interrupt Link [USB2] (IRQs *23)
[ 1.450669] ACPI: PCI Interrupt Link [USB3] (IRQs *23)
[ 1.451143] ACPI: PCI Interrupt Link [USB4] (IRQs *22)
[ 1.451782] ACPI: Invalid _PRS IRQ 0
[ 1.452240] ACPI: PCI Interrupt Link [U1PI] (IRQs) *0
[ 1.452894] ACPI: Invalid _PRS IRQ 0
[ 1.453474] ACPI: PCI Interrupt Link [U2PI] (IRQs) *0
[ 1.454148] ACPI: Invalid _PRS IRQ 0
[ 1.454753] ACPI: PCI Interrupt Link [U3PI] (IRQs) *0
[ 1.455445] ACPI: Invalid _PRS IRQ 0
[ 1.456070] ACPI: PCI Interrupt Link [U4PI] (IRQs) *0
[ 1.456345] ACPI: PCI Interrupt Link [SATA] (IRQs *16)
[ 1.456663] ACPI: Invalid _PRS IRQ 0
[ 1.456912] ACPI: PCI Interrupt Link [SATP] (IRQs) *0
[ 1.457176] ACPI: PCI Interrupt Link [VIDA] (IRQs *16)
[ 1.457492] ACPI: Invalid _PRS IRQ 0
[ 1.457740] ACPI: PCI Interrupt Link [VIDP] (IRQs) *0
[ 1.457879] xen/balloon: Initialising balloon driver.
[ 1.457895] last_pfn = 0x460000 max_arch_pfn = 0x400000000
[ 1.535191] xen-balloon: Initialising balloon driver.
[ 1.535411] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.535418] vgaarb: loaded
[ 1.535421] vgaarb: bridge control possible 0000:01:03.0
[ 1.535493] PCI: Using ACPI for IRQ routing
[ 1.540242] PCI: pci_cache_line_size set to 64 bytes
[ 1.540242] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 1.548592] Switching to clocksource xen
[ 1.549140] Switched to NOHz mode on CPU #22
[ 1.549552] Switched to NOHz mode on CPU #14
[ 1.549564] Switched to NOHz mode on CPU #9
[ 1.549619] Switched to NOHz mode on CPU #20
[ 1.549696] Switched to NOHz mode on CPU #17
[ 1.549884] Switched to NOHz mode on CPU #19
[ 1.549983] Switched to NOHz mode on CPU #12
[ 1.550026] Switched to NOHz mode on CPU #15
[ 1.550176] Switched to NOHz mode on CPU #0
[ 1.550234] Switched to NOHz mode on CPU #2
[ 1.550245] Switched to NOHz mode on CPU #6
[ 1.550260] Switched to NOHz mode on CPU #5
[ 1.550270] Switched to NOHz mode on CPU #23
[ 1.550889] Switched to NOHz mode on CPU #18
[ 1.550900] Switched to NOHz mode on CPU #10
[ 1.551790] pnp: PnP ACPI init
[ 1.551011] Switched to NOHz mode on CPU #7
[ 1.551023] Switched to NOHz mode on CPU #21
[ 1.551831] ACPI: bus type pnp registered
[ 1.551903] pnp 00:00: [bus 00-3f]
[ 1.551908] pnp 00:00: [mem 0xe7f00000-0xfdffffff window]
[ 1.551913] pnp 00:00: [io 0x1000-0xffff window]
[ 1.551916] pnp 00:00: [io 0x0000-0x03af window]
[ 1.551919] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 1.551923] pnp 00:00: [io 0x0d00-0x0fff window]
[ 1.551926] pnp 00:00: [mem 0xfed00000-0xfed03fff window]
[ 1.551930] pnp 00:00: [mem 0xfed00000-0xfed44fff window]
[ 1.551933] pnp 00:00: [io 0x03b0-0x03bb window]
[ 1.551936] pnp 00:00: [io 0x03c0-0x03df window]
[ 1.551940] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.551940] Switched to NOHz mode on CPU #1
[ 1.551324] Switched to NOHz mode on CPU #3
[ 1.551940] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.551553] Switched to NOHz mode on CPU #13
[ 1.551653] Switched to NOHz mode on CPU #11
[ 1.551877] Switched to NOHz mode on CPU #16
[ 1.551913] Switched to NOHz mode on CPU #8
[ 1.552167] Switched to NOHz mode on CPU #4
[ 1.557221] pnp 00:01: [io 0x0010-0x001f]
[ 1.557225] pnp 00:01: [io 0x0020-0x003f]
[ 1.557228] pnp 00:01: [io 0x00a0-0x00bf]
[ 1.557231] pnp 00:01: [io 0x0050-0x0053]
[ 1.557234] pnp 00:01: [io 0x0070-0x0079]
[ 1.557237] pnp 00:01: [io 0x0090-0x009f]
[ 1.557240] pnp 00:01: [io 0x00f0]
[ 1.557243] pnp 00:01: [io 0x0379-0x037a]
[ 1.557246] pnp 00:01: [io 0x0400-0x043f]
[ 1.557251] pnp 00:01: [io 0x04d0-0x04d1]
[ 1.557254] pnp 00:01: [io 0x04d6]
[ 1.557257] pnp 00:01: [io 0x0520]
[ 1.557260] pnp 00:01: [io 0x0580-0x059f]
[ 1.557263] pnp 00:01: [io 0x0600-0x067f]
[ 1.557266] pnp 00:01: [io 0x0700-0x0703]
[ 1.557269] pnp 00:01: [io 0x0820-0x082f]
[ 1.557272] pnp 00:01: [io 0x0900-0x09fe]
[ 1.557275] pnp 00:01: [io 0x0c06-0x0c07]
[ 1.557278] pnp 00:01: [io 0x0c14]
[ 1.557281] pnp 00:01: [io 0x0c4a]
[ 1.557284] pnp 00:01: [io 0x0c50-0x0c52]
[ 1.557287] pnp 00:01: [io 0x0c6c]
[ 1.557290] pnp 00:01: [io 0x0c6f]
[ 1.557295] pnp 00:01: [io 0x0c80-0x0c83]
[ 1.557298] pnp 00:01: [io 0x0c90-0x0c9f]
[ 1.557301] pnp 00:01: [io 0x0ca0-0x0ca5]
[ 1.557304] pnp 00:01: [io 0x0cd0-0x0cdf]
[ 1.557308] pnp 00:01: [io 0x0f50-0x0f58]
[ 1.557311] pnp 00:01: [io 0x0b00-0x0b3f]
[ 1.557314] pnp 00:01: [io 0x02f8-0x02ff]
[ 1.557317] pnp 00:01: [mem 0xc0000000-0xcfffffff]
[ 1.557541] system 00:01: [io 0x0379-0x037a] has been reserved
[ 1.557551] system 00:01: [io 0x0400-0x043f] has been reserved
[ 1.557557] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.557562] system 00:01: [io 0x04d6] has been reserved
[ 1.557568] system 00:01: [io 0x0520] has been reserved
[ 1.557573] system 00:01: [io 0x0580-0x059f] has been reserved
[ 1.557578] system 00:01: [io 0x0600-0x067f] has been reserved
[ 1.557584] system 00:01: [io 0x0700-0x0703] has been reserved
[ 1.557589] system 00:01: [io 0x0820-0x082f] has been reserved
[ 1.557595] system 00:01: [io 0x0900-0x09fe] has been reserved
[ 1.557600] system 00:01: [io 0x0c06-0x0c07] has been reserved
[ 1.557605] system 00:01: [io 0x0c14] has been reserved
[ 1.557611] system 00:01: [io 0x0c4a] has been reserved
[ 1.557616] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 1.557622] system 00:01: [io 0x0c6c] has been reserved
[ 1.557627] system 00:01: [io 0x0c6f] has been reserved
[ 1.557633] system 00:01: [io 0x0c80-0x0c83] has been reserved
[ 1.557638] system 00:01: [io 0x0c90-0x0c9f] has been reserved
[ 1.557644] system 00:01: [io 0x0ca0-0x0ca5] has been reserved
[ 1.557649] system 00:01: [io 0x0cd0-0x0cdf] has been reserved
[ 1.557655] system 00:01: [io 0x0f50-0x0f58] has been reserved
[ 1.557660] system 00:01: [io 0x0b00-0x0b3f] has been reserved
[ 1.557665] system 00:01: [io 0x02f8-0x02ff] has been reserved
[ 1.557671] system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
[ 1.557677] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.557695] pnp 00:02: [io 0x0ca2-0x0ca3]
[ 1.557813] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
[ 1.557857] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.557979] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.557997] pnp 00:04: [dma 7]
[ 1.558000] pnp 00:04: [io 0x0000-0x000f]
[ 1.558003] pnp 00:04: [io 0x0080-0x008f]
[ 1.558006] pnp 00:04: [io 0x00c0-0x00df]
[ 1.558125] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.558141] pnp 00:05: [io 0x0061]
[ 1.558262] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.558285] pnp 00:06: [io 0x0060]
[ 1.558289] pnp 00:06: [io 0x0064]
[ 1.558294] xen: registering gsi 1 triggering 1 polarity 0
[ 1.558298] xen_map_pirq_gsi: returning irq 1 for gsi 1
[ 1.558302] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 1.558316] pnp 00:06: [irq 1]
[ 1.558439] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.558456] xen: registering gsi 12 triggering 1 polarity 0
[ 1.558459] xen_map_pirq_gsi: returning irq 12 for gsi 12
[ 1.558463] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 1.558472] pnp 00:07: [irq 12]
[ 1.558598] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 1.558616] pnp 00:08: [io 0x002e-0x002f]
[ 1.558620] pnp 00:08: [io 0x0620-0x065f]
[ 1.558623] pnp 00:08: [io 0x0680-0x069f]
[ 1.558626] pnp 00:08: [io 0x0600-0x061f]
[ 1.558629] pnp 00:08: [io 0x0660-0x067f]
[ 1.558632] pnp 00:08: [io 0x0300-0x031f]
[ 1.558759] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 1.559019] xen: registering gsi 4 triggering 1 polarity 0
[ 1.559022] xen_map_pirq_gsi: returning irq 4 for gsi 4
[ 1.559026] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 1.559035] pnp 00:09: [irq 4]
[ 1.559038] pnp 00:09: [io 0x03f8-0x03ff]
[ 1.559344] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 1.559361] pnp 00:0a: [io 0x0070-0x0071]
[ 1.559490] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.559739] pnp: PnP ACPI: found 11 devices
[ 1.559743] ACPI: ACPI bus type pnp unregistered
[ 1.565152] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 1.565207] PCI: max bus depth: 3 pci_try_num: 4
[ 1.565310] pci 0000:00:04.0: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
[ 1.565317] pci 0000:00:06.0: BAR 15: assigned [mem 0xf0100000-0xf01fffff pref]
[ 1.565323] pci 0000:00:0a.0: BAR 15: assigned [mem 0xf0200000-0xf02fffff pref]
[ 1.565329] pci 0000:00:0d.0: BAR 15: assigned [mem 0xf0300000-0xf03fffff pref]
[ 1.565337] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
[ 1.565343] pci 0000:04:00.1: BAR 6: assigned [mem 0xf0010000-0xf001ffff pref]
[ 1.565349] pci 0000:00:04.0: PCI bridge to [bus 04-04]
[ 1.565353] pci 0000:00:04.0: bridge window [io disabled]
[ 1.565361] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 1.565368] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff pref]
[ 1.565380] pci 0000:05:00.0: BAR 6: assigned [mem 0xf0100000-0xf010ffff pref]
[ 1.565386] pci 0000:05:00.1: BAR 6: assigned [mem 0xf0110000-0xf011ffff pref]
[ 1.565392] pci 0000:00:06.0: PCI bridge to [bus 05-05]
[ 1.565395] pci 0000:00:06.0: bridge window [io disabled]
[ 1.565403] pci 0000:00:06.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 1.565410] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff pref]
[ 1.565423] pci 0000:02:00.2: BAR 6: assigned [mem 0xf0200000-0xf020ffff pref]
[ 1.565429] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 1.565435] pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
[ 1.565444] pci 0000:00:0a.0: bridge window [mem 0xf3a00000-0xf3cfffff]
[ 1.565451] pci 0000:00:0a.0: bridge window [mem 0xf0200000-0xf02fffff pref]
[ 1.565464] pci 0000:0a:05.0: BAR 14: can't assign mem (size 0x200000)
[ 1.565470] pci 0000:0a:05.0: BAR 15: can't assign mem pref (size 0x200000)
[ 1.565475] pci 0000:0a:05.0: BAR 13: can't assign io (size 0x1000)
[ 1.565481] pci 0000:0a:04.0: PCI bridge to [bus 0b-0b]
[ 1.565485] pci 0000:0a:04.0: bridge window [io disabled]
[ 1.565494] pci 0000:0a:04.0: bridge window [mem disabled]
[ 1.565502] pci 0000:0a:04.0: bridge window [mem pref disabled]
[ 1.565513] pci 0000:0a:05.0: PCI bridge to [bus 0c-0e]
[ 1.565517] pci 0000:0a:05.0: bridge window [io disabled]
[ 1.565526] pci 0000:0a:05.0: bridge window [mem disabled]
[ 1.565534] pci 0000:0a:05.0: bridge window [mem pref disabled]
[ 1.565545] pci 0000:0a:06.0: PCI bridge to [bus 0f-11]
[ 1.565549] pci 0000:0a:06.0: bridge window [io disabled]
[ 1.565558] pci 0000:0a:06.0: bridge window [mem disabled]
[ 1.565566] pci 0000:0a:06.0: bridge window [mem pref disabled]
[ 1.565577] pci 0000:09:00.0: PCI bridge to [bus 0a-11]
[ 1.565581] pci 0000:09:00.0: bridge window [io disabled]
[ 1.565590] pci 0000:09:00.0: bridge window [mem disabled]
[ 1.565598] pci 0000:09:00.0: bridge window [mem pref disabled]
[ 1.565609] pci 0000:00:0b.0: PCI bridge to [bus 09-11]
[ 1.565613] pci 0000:00:0b.0: bridge window [io disabled]
[ 1.565621] pci 0000:00:0b.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 1.565628] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 1.565639] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0300000-0xf037ffff pref]
[ 1.565645] pci 0000:00:0d.0: PCI bridge to [bus 03-03]
[ 1.565651] pci 0000:00:0d.0: bridge window [io 0x4000-0x4fff]
[ 1.565660] pci 0000:00:0d.0: bridge window [mem 0xf3d00000-0xf3ffffff]
[ 1.565667] pci 0000:00:0d.0: bridge window [mem 0xf0300000-0xf03fffff pref]
[ 1.565680] pci 0000:01:03.0: BAR 6: assigned [mem 0xf3900000-0xf391ffff pref]
[ 1.565686] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 1.565692] pci 0000:00:14.4: bridge window [io 0x2000-0x2fff]
[ 1.565703] pci 0000:00:14.4: bridge window [mem 0xf3900000-0xf39fffff]
[ 1.565712] pci 0000:00:14.4: bridge window [mem 0xe8000000-0xefffffff pref]
[ 1.565840] ACPI: PCI Interrupt Link [BI04] enabled at IRQ 52
[ 1.565845] xen: registering gsi 52 triggering 0 polarity 0
[ 1.565867] xen: --> pirq=52 -> irq=52 (gsi=52)
[ 1.565875] pci 0000:00:04.0: PCI INT A -> Link[BI04] -> GSI 52 (level, high) -> IRQ 52
[ 1.565886] pci 0000:00:04.0: setting latency timer to 64
[ 1.566005] ACPI: PCI Interrupt Link [BI06] enabled at IRQ 53
[ 1.566010] xen: registering gsi 53 triggering 0 polarity 0
[ 1.566019] xen: --> pirq=53 -> irq=53 (gsi=53)
[ 1.566024] pci 0000:00:06.0: PCI INT A -> Link[BI06] -> GSI 53 (level, high) -> IRQ 53
[ 1.566034] pci 0000:00:06.0: setting latency timer to 64
[ 1.566186] ACPI: PCI Interrupt Link [BI0A] enabled at IRQ 24
[ 1.566191] xen: registering gsi 24 triggering 0 polarity 0
[ 1.566200] xen: --> pirq=24 -> irq=24 (gsi=24)
[ 1.566206] pci 0000:00:0a.0: PCI INT A -> Link[BI0A] -> GSI 24 (level, high) -> IRQ 24
[ 1.566215] pci 0000:00:0a.0: setting latency timer to 64
[ 1.566375] ACPI: PCI Interrupt Link [BI0B] enabled at IRQ 54
[ 1.566380] xen: registering gsi 54 triggering 0 polarity 0
[ 1.566388] xen: --> pirq=54 -> irq=54 (gsi=54)
[ 1.566394] pci 0000:00:0b.0: PCI INT A -> Link[BI0B] -> GSI 54 (level, high) -> IRQ 54
[ 1.566403] pci 0000:00:0b.0: setting latency timer to 64
[ 1.567164] ACPI: PCI Interrupt Link [I0B0] enabled at IRQ 32
[ 1.567169] xen: registering gsi 32 triggering 0 polarity 0
[ 1.567178] xen: --> pirq=32 -> irq=32 (gsi=32)
[ 1.567183] pci 0000:09:00.0: PCI INT A -> Link[I0B0] -> GSI 32 (level, high) -> IRQ 32
[ 1.567193] pci 0000:09:00.0: setting latency timer to 64
[ 1.567203] xen: registering gsi 32 triggering 0 polarity 0
[ 1.567207] xen_map_pirq_gsi: returning irq 32 for gsi 32
[ 1.567211] xen: --> pirq=32 -> irq=32 (gsi=32)
[ 1.567215] Already setup the GSI :32
[ 1.567220] pci 0000:0a:04.0: PCI INT A -> Link[I0B0] -> GSI 32 (level, high) -> IRQ 32
[ 1.567229] pci 0000:0a:04.0: setting latency timer to 64
[ 1.567986] ACPI: PCI Interrupt Link [I0B1] enabled at IRQ 33
[ 1.567991] xen: registering gsi 33 triggering 0 polarity 0
[ 1.568002] xen: --> pirq=33 -> irq=33 (gsi=33)
[ 1.568008] pci 0000:0a:05.0: PCI INT A -> Link[I0B1] -> GSI 33 (level, high) -> IRQ 33
[ 1.568018] pci 0000:0a:05.0: setting latency timer to 64
[ 1.568798] ACPI: PCI Interrupt Link [I0B2] enabled at IRQ 34
[ 1.568803] xen: registering gsi 34 triggering 0 polarity 0
[ 1.568812] xen: --> pirq=34 -> irq=34 (gsi=34)
[ 1.568817] pci 0000:0a:06.0: PCI INT A -> Link[I0B2] -> GSI 34 (level, high) -> IRQ 34
[ 1.568828] pci 0000:0a:06.0: setting latency timer to 64
[ 1.569006] ACPI: PCI Interrupt Link [BI0D] enabled at IRQ 54
[ 1.569011] xen: registering gsi 54 triggering 0 polarity 0
[ 1.569015] xen_map_pirq_gsi: returning irq 54 for gsi 54
[ 1.569020] xen: --> pirq=54 -> irq=54 (gsi=54)
[ 1.569023] Already setup the GSI :54
[ 1.569028] pci 0000:00:0d.0: PCI INT A -> Link[BI0D] -> GSI 54 (level, high) -> IRQ 54
[ 1.569037] pci 0000:00:0d.0: setting latency timer to 64
[ 1.569051] pci_bus 0000:00: resource 4 [mem 0xe7f00000-0xfdffffff]
[ 1.569055] pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
[ 1.569059] pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
[ 1.569062] pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
[ 1.569065] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
[ 1.569069] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff]
[ 1.569073] pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb]
[ 1.569076] pci_bus 0000:00: resource 11 [io 0x03c0-0x03df]
[ 1.569080] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
[ 1.569084] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 1.569087] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff pref]
[ 1.569091] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xfbffffff]
[ 1.569095] pci_bus 0000:05: resource 2 [mem 0xf0100000-0xf01fffff pref]
[ 1.569099] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 1.569103] pci_bus 0000:02: resource 1 [mem 0xf3a00000-0xf3cfffff]
[ 1.569106] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf02fffff pref]
[ 1.569110] pci_bus 0000:09: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 1.569115] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 1.569118] pci_bus 0000:03: resource 1 [mem 0xf3d00000-0xf3ffffff]
[ 1.569122] pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff pref]
[ 1.569126] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.569129] pci_bus 0000:01: resource 1 [mem 0xf3900000-0xf39fffff]
[ 1.569133] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
[ 1.569137] pci_bus 0000:01: resource 4 [mem 0xe7f00000-0xfdffffff]
[ 1.569141] pci_bus 0000:01: resource 5 [io 0x1000-0xffff]
[ 1.569144] pci_bus 0000:01: resource 6 [io 0x0000-0x03af]
[ 1.569148] pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7]
[ 1.569151] pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff]
[ 1.569155] pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed44fff]
[ 1.569158] pci_bus 0000:01: resource 10 [io 0x03b0-0x03bb]
[ 1.569162] pci_bus 0000:01: resource 11 [io 0x03c0-0x03df]
[ 1.569165] pci_bus 0000:01: resource 12 [mem 0x000a0000-0x000bffff]
[ 1.569935] NET: Registered protocol family 2
[ 1.572167] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.578006] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.581706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.582127] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.582134] TCP reno registered
[ 1.582253] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.582508] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.583552] NET: Registered protocol family 1
[ 1.680343] pci 0000:01:03.0: Boot video device
[ 1.680352] PCI: CLS 64 bytes, default 64
[ 1.684082] audit: initializing netlink socket (disabled)
[ 1.684100] type=2000 audit(1310744267.517:1): initialized
[ 1.703392] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.707078] VFS: Disk quotas dquot_6.5.2
[ 1.707446] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.707955] msgmni has been set to 2433
[ 1.709427] alg: No test for stdrng (krng)
[ 1.709871] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.709899] io scheduler noop registered
[ 1.709910] io scheduler deadline registered
[ 1.710398] io scheduler cfq registered (default)
[ 1.714101] pcieport 0000:09:00.0: setting latency timer to 64
[ 1.714957] pcieport 0000:0a:04.0: setting latency timer to 64
[ 1.715740] pcieport 0000:0a:05.0: setting latency timer to 64
[ 1.716552] pcieport 0000:0a:06.0: setting latency timer to 64
[ 1.717560] APEI: Can not request iomem region <00000000000e8024-00000000000e8038> for GARs.
[ 1.718771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.721999] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.784139] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.944231] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.965286] hpet_acpi_add: no address or irqs in _CRS
[ 1.965364] Linux agpgart interface v0.103
[ 1.983183] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.985346] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.985388] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.985977] mousedev: PS/2 mouse device common for all mice
[ 1.986122] rtc_cmos 00:0a: RTC can wake from S4
[ 1.986467] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 1.986550] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.986589] cpuidle: using governor ladder
[ 1.986601] cpuidle: using governor menu
[ 1.988022] aufs 2.1-standalone.tree-3.0-rcN-20110620
[ 1.989071] TCP cubic registered
[ 1.990336] NET: Registered protocol family 10
[ 1.993696] Mobile IPv6
[ 1.993714] NET: Registered protocol family 17
[ 1.993735] Registering the dns_resolver key type
[ 1.994095] PM: Hibernation image not present or could not be loaded.
[ 1.994139] registered taskstats version 1
[ 1.996863] rtc_cmos 00:0a: setting system clock to 2011-07-15 15:37:47 UTC (1310744267)
[ 1.997030] Initializing network drop monitor service
[ 1.998319] Freeing unused kernel memory: 556k freed
[ 1.998730] Write protecting the kernel read-only data: 6144k
[ 2.008578] Freeing unused kernel memory: 748k freed
[ 2.010262] Freeing unused kernel memory: 752k freed
[ 2.045541] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.135911] udevd[208]: starting version 171
[ 2.538200] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.6 (Mar 7, 2011)
[ 2.541024] ACPI: PCI Interrupt Link [I040] enabled at IRQ 44
[ 2.541049] xen: registering gsi 44 triggering 0 polarity 0
[ 2.541147] xen: --> pirq=44 -> irq=44 (gsi=44)
[ 2.541472] bnx2 0000:04:00.0: PCI INT A -> Link[I040] -> GSI 44 (level, high) -> IRQ 44
[ 2.541657] bnx2 0000:04:00.0: setting latency timer to 64
[ 2.572612] SCSI subsystem initialized
[ 2.573690] usbcore: registered new interface driver usbfs
[ 2.573816] usbcore: registered new interface driver hub
[ 2.574267] usbcore: registered new device driver usb
[ 2.587418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.588060] ACPI: PCI Interrupt Link [USB2] enabled at IRQ 23
[ 2.588093] xen: registering gsi 23 triggering 0 polarity 1
[ 2.588554] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 2.588597] ehci_hcd 0000:00:12.2: PCI INT B -> Link[USB2] -> GSI 23 (level, low) -> IRQ 23
[ 2.588707] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.588808] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.588868] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.589132] ehci_hcd 0000:00:12.2: debug port 1
[ 2.589260] ehci_hcd 0000:00:12.2: irq 23, io mem 0xf38c0000
[ 2.590383] HP HPSA Driver (v 2.0.2-1)
[ 2.593181] ACPI: PCI Interrupt Link [I0D0] enabled at IRQ 40
[ 2.593198] xen: registering gsi 40 triggering 0 polarity 0
[ 2.593241] xen: --> pirq=40 -> irq=40 (gsi=40)
[ 2.593266] hpsa 0000:03:00.0: PCI INT A -> Link[I0D0] -> GSI 40 (level, high) -> IRQ 40
[ 2.593328] hpsa 0000:03:00.0: MSIX
[ 2.600837] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.600937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.600954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.600971] usb usb1: Product: EHCI Host Controller
[ 2.600983] usb usb1: Manufacturer: Linux 3.0.0-rc7 ehci_hcd
[ 2.600995] usb usb1: SerialNumber: 0000:00:12.2
[ 2.601503] hub 1-0:1.0: USB hub found
[ 2.601528] hub 1-0:1.0: 6 ports detected
[ 2.602531] ACPI: PCI Interrupt Link [USB4] enabled at IRQ 22
[ 2.602548] xen: registering gsi 22 triggering 0 polarity 1
[ 2.602633] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 2.602665] ehci_hcd 0000:00:13.2: PCI INT B -> Link[USB4] -> GSI 22 (level, low) -> IRQ 22
[ 2.602922] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.602976] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.603007] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.603218] ehci_hcd 0000:00:13.2: debug port 1
[ 2.603335] ehci_hcd 0000:00:13.2: irq 22, io mem 0xf3890000
[ 2.612806] hpsa 0000:03:00.0: hpsa0: <0x323a> at IRQ 422 using DAC
[ 2.618850] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.619002] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.619018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.619033] usb usb2: Product: EHCI Host Controller
[ 2.619045] usb usb2: Manufacturer: Linux 3.0.0-rc7 ehci_hcd
[ 2.619057] usb usb2: SerialNumber: 0000:00:13.2
[ 2.619475] hub 2-0:1.0: USB hub found
[ 2.619499] hub 2-0:1.0: 6 ports detected
[ 2.626114] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.626439] libata version 3.00 loaded.
[ 2.628708] ACPI: PCI Interrupt Link [I071] enabled at IRQ 44
[ 2.628733] xen: registering gsi 44 triggering 0 polarity 0
[ 2.628753] xen_map_pirq_gsi: returning irq 44 for gsi 44
[ 2.628766] xen: --> pirq=44 -> irq=44 (gsi=44)
[ 2.628780] Already setup the GSI :44
[ 2.628796] uhci_hcd 0000:02:00.4: PCI INT B -> Link[I071] -> GSI 44 (level, high) -> IRQ 44
[ 2.628833] uhci_hcd 0000:02:00.4: setting latency timer to 64
[ 2.628848] uhci_hcd 0000:02:00.4: UHCI Host Controller
[ 2.628893] uhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 3
[ 2.628955] uhci_hcd 0000:02:00.4: port count misdetected? forcing to 2 ports
[ 2.629118] uhci_hcd 0000:02:00.4: irq 44, io base 0x00003c00
[ 2.629353] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.629372] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.629387] usb usb3: Product: UHCI Host Controller
[ 2.629400] usb usb3: Manufacturer: Linux 3.0.0-rc7 uhci_hcd
[ 2.629412] usb usb3: SerialNumber: 0000:02:00.4
[ 2.629875] hub 3-0:1.0: USB hub found
[ 2.629899] hub 3-0:1.0: 2 ports detected
[ 2.637307] scsi0 : hpsa
[ 2.638512] ahci 0000:00:11.0: version 3.0
[ 2.638837] ACPI: PCI Interrupt Link [SATA] enabled at IRQ 16
[ 2.638861] xen: registering gsi 16 triggering 0 polarity 1
[ 2.638933] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 2.638960] ahci 0000:00:11.0: PCI INT A -> Link[SATA] -> GSI 16 (level, low) -> IRQ 16
[ 2.639713] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 2.639742] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.641440] scsi1 : ahci
[ 2.641671] ata1: SATA max UDMA/133 abar m1024@0xf38f0000 port 0xf38f0100 irq 16
[ 2.642068] hpsa 0000:03:00.0: RAID device c0b0t0l0 added.
[ 2.642087] hpsa 0000:03:00.0: Direct-Access device c0b0t0l1 added.
[ 2.642656] scsi 0:0:0:0: RAID HP P410i 3.66 PQ: 0 ANSI: 5
[ 2.643048] scsi 0:0:0:1: Direct-Access HP LOGICAL VOLUME 3.66 PQ: 0 ANSI: 5
[ 2.663152] pata_atiixp 0000:00:14.1: can't derive routing for PCI INT A
[ 2.663253] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 2.666147] bnx2 0000:04:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 44, node addr 68:b5:99:74:02:08
[ 2.668433] ACPI: PCI Interrupt Link [I041] enabled at IRQ 45
[ 2.668453] xen: registering gsi 45 triggering 0 polarity 0
[ 2.668492] xen: --> pirq=45 -> irq=45 (gsi=45)
[ 2.668513] bnx2 0000:04:00.1: PCI INT B -> Link[I041] -> GSI 45 (level, high) -> IRQ 45
[ 2.668547] bnx2 0000:04:00.1: setting latency timer to 64
[ 2.669312] scsi2 : pata_atiixp
[ 2.669708] scsi3 : pata_atiixp
[ 2.669886] ata2: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
[ 2.669903] ata3: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
[ 2.705722] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.706282] ACPI: PCI Interrupt Link [USB1] enabled at IRQ 22
[ 2.706306] xen: registering gsi 22 triggering 0 polarity 1
[ 2.706325] xen_map_pirq_gsi: returning irq 22 for gsi 22
[ 2.706338] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 2.706351] Already setup the GSI :22
[ 2.706367] ohci_hcd 0000:00:12.0: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
[ 2.706450] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.706496] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.706599] ohci_hcd 0000:00:12.0: irq 22, io mem 0xf38e0000
[ 2.720400] bnx2 0000:04:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 45, node addr 68:b5:99:74:02:0a
[ 2.722810] ACPI: PCI Interrupt Link [I050] enabled at IRQ 51
[ 2.722829] xen: registering gsi 51 triggering 0 polarity 0
[ 2.722871] xen: --> pirq=51 -> irq=51 (gsi=51)
[ 2.722892] bnx2 0000:05:00.0: PCI INT A -> Link[I050] -> GSI 51 (level, high) -> IRQ 51
[ 2.722927] bnx2 0000:05:00.0: setting latency timer to 64
[ 2.764263] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.764286] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.764303] usb usb4: Product: OHCI Host Controller
[ 2.764316] usb usb4: Manufacturer: Linux 3.0.0-rc7 ohci_hcd
[ 2.764328] usb usb4: SerialNumber: 0000:00:12.0
[ 2.764755] hub 4-0:1.0: USB hub found
[ 2.764782] hub 4-0:1.0: 3 ports detected
[ 2.765440] xen: registering gsi 22 triggering 0 polarity 1
[ 2.765461] xen_map_pirq_gsi: returning irq 22 for gsi 22
[ 2.765477] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 2.765491] Already setup the GSI :22
[ 2.765507] ohci_hcd 0000:00:12.1: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
[ 2.765634] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.765704] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 5
[ 2.765810] ohci_hcd 0000:00:12.1: irq 22, io mem 0xf38d0000
[ 2.775375] bnx2 0000:05:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem fa000000, IRQ 51, node addr 68:b5:99:74:02:0c
[ 2.777961] ACPI: PCI Interrupt Link [I051] enabled at IRQ 48
[ 2.777982] xen: registering gsi 48 triggering 0 polarity 0
[ 2.778020] xen: --> pirq=48 -> irq=48 (gsi=48)
[ 2.778043] bnx2 0000:05:00.1: PCI INT B -> Link[I051] -> GSI 48 (level, high) -> IRQ 48
[ 2.778076] bnx2 0000:05:00.1: setting latency timer to 64
[ 2.824749] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.824770] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.824787] usb usb5: Product: OHCI Host Controller
[ 2.824799] usb usb5: Manufacturer: Linux 3.0.0-rc7 ohci_hcd
[ 2.824818] usb usb5: SerialNumber: 0000:00:12.1
[ 2.825223] hub 5-0:1.0: USB hub found
[ 2.825253] hub 5-0:1.0: 3 ports detected
[ 2.826235] ACPI: PCI Interrupt Link [USB3] enabled at IRQ 23
[ 2.826255] xen: registering gsi 23 triggering 0 polarity 1
[ 2.826273] xen_map_pirq_gsi: returning irq 23 for gsi 23
[ 2.826286] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 2.826298] Already setup the GSI :23
[ 2.826314] ohci_hcd 0000:00:13.0: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
[ 2.826399] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.826441] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 2.826557] ohci_hcd 0000:00:13.0: irq 23, io mem 0xf38b0000
[ 2.830875] bnx2 0000:05:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 48, node addr 68:b5:99:74:02:0e
[ 2.845044] ata3.00: ATAPI: hp DVD A DS8A5LH, 1HE3, max UDMA/100
[ 2.845077] ata3.00: limited to UDMA/33 due to 40-wire cable
[ 2.861152] ata3.00: configured for UDMA/33
[ 2.884450] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.884475] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.884491] usb usb6: Product: OHCI Host Controller
[ 2.884503] usb usb6: Manufacturer: Linux 3.0.0-rc7 ohci_hcd
[ 2.884516] usb usb6: SerialNumber: 0000:00:13.0
[ 2.884920] hub 6-0:1.0: USB hub found
[ 2.884947] hub 6-0:1.0: 3 ports detected
[ 2.885568] xen: registering gsi 23 triggering 0 polarity 1
[ 2.885587] xen_map_pirq_gsi: returning irq 23 for gsi 23
[ 2.885604] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 2.885617] Already setup the GSI :23
[ 2.885633] ohci_hcd 0000:00:13.1: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
[ 2.885717] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.885759] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 7
[ 2.885921] ohci_hcd 0000:00:13.1: irq 23, io mem 0xf38a0000
[ 2.928459] usb 2-4: new high speed USB device number 2 using ehci_hcd
[ 2.944405] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.944428] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.944443] usb usb7: Product: OHCI Host Controller
[ 2.944455] usb usb7: Manufacturer: Linux 3.0.0-rc7 ohci_hcd
[ 2.944467] usb usb7: SerialNumber: 0000:00:13.1
[ 2.944857] hub 7-0:1.0: USB hub found
[ 2.944882] hub 7-0:1.0: 3 ports detected
[ 2.960407] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.966313] scsi 3:0:0:0: CD-ROM hp DVD A DS8A5LH 1HE3 PQ: 0 ANSI: 5
[ 2.974204] sd 0:0:0:1: [sda] 1720099632 512-byte logical blocks: (880 GB/820 GiB)
[ 2.974654] sd 0:0:0:1: [sda] Write Protect is off
[ 2.974674] sd 0:0:0:1: [sda] Mode Sense: 6b 00 00 08
[ 2.974974] sd 0:0:0:1: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.997348] sda: sda1 sda2 < sda5 >
[ 2.999105] sd 0:0:0:1: [sda] Attached SCSI disk
[ 3.015037] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.015067] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.015560] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.038294] scsi 0:0:0:0: Attached scsi generic sg0 type 12
[ 3.038567] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 3.038728] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.535842] usb 2-4: New USB device found, idVendor=03f0, idProduct=5607
[ 3.535886] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.535901] usb 2-4: Product: v210w
[ 3.535913] usb 2-4: Manufacturer: HP
[ 3.535923] usb 2-4: SerialNumber: AA04012700009185
[ 3.558191] usbcore: registered new interface driver uas
[ 3.569597] Initializing USB Mass Storage driver...
[ 3.570257] scsi4 : usb-storage 2-4:1.0
[ 3.570630] usbcore: registered new interface driver usb-storage
[ 3.570644] USB Mass Storage support registered.
[ 3.648321] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 3.793650] usb 3-1: New USB device found, idVendor=03f0, idProduct=7029
[ 3.793671] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.793686] usb 3-1: Product: Virtual Keyboard
[ 3.793698] usb 3-1: Manufacturer: HP
[ 3.832031] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:0a.0/0000:02:00.4/usb3/3-1/3-1:1.0/input/input1
[ 3.832434] generic-usb 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input0
[ 3.836265] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:0a.0/0000:02:00.4/usb3/3-1/3-1:1.1/input/input2
[ 3.836569] generic-usb 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input1
[ 3.836686] usbcore: registered new interface driver usbhid
[ 3.836700] usbhid: USB HID core driver
[ 3.961403] Uniform Multi-Platform E-IDE driver
[ 3.967949] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 4.378086] EXT3-fs: barriers not enabled
[ 4.382311] kjournald starting. Commit interval 5 seconds
[ 4.382918] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 4.625266] scsi 4:0:0:0: Direct-Access hp v210w 1100 PQ: 0 ANSI: 0 CCS
[ 4.852987] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 4.853649] sd 4:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4.854781] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.854805] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 4.855920] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4.855941] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.860760] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4.860779] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.862053] sdb: sdb1
[ 4.866334] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4.866354] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.866369] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.899437] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.910989] ISO 9660 Extensions: RRIP_1991A
[ 6.090160] loop: module loaded
[ 6.347915] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 19.940592] udevd[1248]: starting version 171
[ 20.189867] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 20.189917] ACPI: Power Button [PWRF]
[ 20.285388] ACPI: acpi_idle registered with cpuidle
[ 20.743844] ACPI: PCI Interrupt Link [I070] enabled at IRQ 47
[ 20.743871] xen: registering gsi 47 triggering 0 polarity 0
[ 20.743930] xen: --> pirq=47 -> irq=47 (gsi=47)
[ 20.743960] hpwdt 0000:02:00.0: PCI INT A -> Link[I070] -> GSI 47 (level, high) -> IRQ 47
[ 20.744832] hpwdt: New timer passed in is 30 seconds.
[ 20.746194] hpwdt 0000:02:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST).
[ 20.746435] hpwdt 0000:02:00.0: HP Watchdog Timer Driver: 1.2.0, timer margin: 30 seconds (nowayout=0).
[ 20.750655] xen: registering gsi 44 triggering 0 polarity 0
[ 20.750675] xen_map_pirq_gsi: returning irq 44 for gsi 44
[ 20.750692] xen: --> pirq=44 -> irq=44 (gsi=44)
[ 20.750705] Already setup the GSI :44
[ 20.750729] hpilo 0000:02:00.2: PCI INT B -> Link[I071] -> GSI 44 (level, high) -> IRQ 44
[ 20.750761] hpilo 0000:02:00.2: setting latency timer to 64
[ 20.849790] MCE: In-kernel MCE decoding enabled.
[ 20.888842] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 20.930988] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 21.262931] EDAC MC: Ver: 2.1.0
[ 21.318781] AMD64 EDAC driver v3.4.0
[ 21.319181] EDAC amd64: DRAM ECC enabled.
[ 21.319328] EDAC amd64: F10h detected (node 0).
[ 21.319563] EDAC MC: DCT0 chip selects:
[ 21.319573] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 21.319593] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 21.319612] EDAC amd64: MC: 4: 4096MB 5: 0MB
[ 21.319630] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.319644] EDAC MC: DCT1 chip selects:
[ 21.319659] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 21.319676] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 21.319694] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 21.319713] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.319731] EDAC amd64: using x8 syndromes.
[ 21.319745] EDAC amd64: MCT channel count: 1
[ 21.319848] EDAC amd64: CS4: Registered DDR3 RAM
[ 21.319903] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
[ 21.320854] EDAC amd64: DRAM ECC enabled.
[ 21.321623] EDAC amd64: F10h detected (node 1).
[ 21.321792] EDAC MC: DCT0 chip selects:
[ 21.321801] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 21.321814] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 21.321827] EDAC amd64: MC: 4: 4096MB 5: 0MB
[ 21.321840] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.321851] EDAC MC: DCT1 chip selects:
[ 21.321860] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 21.321872] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 21.321884] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 21.321897] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.321909] EDAC amd64: using x8 syndromes.
[ 21.321920] EDAC amd64: MCT channel count: 1
[ 21.321986] EDAC amd64: CS4: Registered DDR3 RAM
[ 21.322035] EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
[ 21.322417] EDAC amd64: DRAM ECC enabled.
[ 21.322443] EDAC amd64: F10h detected (node 2).
[ 21.322635] EDAC MC: DCT0 chip selects:
[ 21.322644] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 21.322657] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 21.322669] EDAC amd64: MC: 4: 4096MB 5: 0MB
[ 21.322686] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.322698] EDAC MC: DCT1 chip selects:
[ 21.322706] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 21.322717] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 21.322729] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 21.322740] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.322751] EDAC amd64: using x8 syndromes.
[ 21.322762] EDAC amd64: MCT channel count: 1
[ 21.322898] EDAC amd64: CS4: Registered DDR3 RAM
[ 21.322944] EDAC MC2: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:1a.2
[ 21.323285] EDAC amd64: DRAM ECC enabled.
[ 21.323302] EDAC amd64: F10h detected (node 3).
[ 21.323484] EDAC MC: DCT0 chip selects:
[ 21.323494] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 21.323507] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 21.323520] EDAC amd64: MC: 4: 4096MB 5: 0MB
[ 21.323532] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.323543] EDAC MC: DCT1 chip selects:
[ 21.323552] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 21.323564] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 21.323576] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 21.323588] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.323599] EDAC amd64: using x8 syndromes.
[ 21.323609] EDAC amd64: MCT channel count: 1
[ 21.323665] EDAC amd64: CS4: Registered DDR3 RAM
[ 21.323726] EDAC MC3: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:1b.2
[ 21.323964] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 21.390916] logips2pp: Detected unknown logitech mouse model 127
[ 21.529974] [drm] Initialized drm 1.1.0 20060810
[ 21.880928] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 21.981648] [drm] radeon kernel modesetting enabled.
[ 21.982394] ACPI: PCI Interrupt Link [VIDA] enabled at IRQ 16
[ 21.982417] xen: registering gsi 16 triggering 0 polarity 1
[ 21.982445] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 21.982458] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 21.982473] Already setup the GSI :16
[ 21.982490] radeon 0000:01:03.0: PCI INT A -> Link[VIDA] -> GSI 16 (level, low) -> IRQ 16
[ 21.983271] [drm] initializing kernel modesetting (RV100 0x1002:0x515E).
[ 21.983394] [drm] register mmio base: 0xF39F0000
[ 21.983407] [drm] register mmio size: 65536
[ 21.983935] radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used)
[ 21.983956] radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[ 21.983997] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.984010] [drm] Driver supports precise vblank timestamp query.
[ 21.984041] [drm] radeon: irq initialized.
[ 21.984062] [drm] Detected VRAM RAM=128M, BAR=128M
[ 21.984074] [drm] RAM width 16bits DDR
[ 21.984349] [TTM] Zone kernel: Available graphics memory: 623974 kiB.
[ 21.984364] [TTM] Initializing pool allocator.
[ 21.984434] [drm] radeon: 64M of VRAM memory ready
[ 21.984449] [drm] radeon: 512M of GTT memory ready.
[ 21.984507] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 22.009244] radeon 0000:01:03.0: WB enabled
[ 22.009393] [drm] Loading R100 Microcode
[ 22.032392] radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
[ 22.032413] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 22.032429] radeon 0000:01:03.0: failed initializing CP (-2).
[ 22.032441] radeon 0000:01:03.0: Disabling GPU acceleration
[ 22.032460] [drm] radeon: cp finalized
[ 22.034789] [drm] Radeon Display Connectors
[ 22.034808] [drm] Connector 0:
[ 22.034818] [drm] VGA
[ 22.034829] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 22.034841] [drm] Encoders:
[ 22.034857] [drm] CRT1: INTERNAL_DAC1
[ 22.034869] [drm] Connector 1:
[ 22.034885] [drm] VGA
[ 22.034902] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[ 22.034920] [drm] Encoders:
[ 22.034930] [drm] CRT2: INTERNAL_DAC2
[ 22.224791] [drm] fb mappable at 0xE8040000
[ 22.224806] [drm] vram apper at 0xE8000000
[ 22.224818] [drm] size 786432
[ 22.224827] [drm] fb depth is 8
[ 22.224837] [drm] pitch is 1024
[ 22.225055] fbcon: radeondrmfb (fb0) is primary device
[ 22.374463] Console: switching to colour frame buffer device 128x48
[ 22.396377] fb0: radeondrmfb frame buffer device
[ 22.396570] drm: registered panic notifier
[ 22.396749] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:03.0 on minor 0
[ 100.907977] device-mapper: uevent: version 1.0.3
[ 100.908765] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 103.657883] RPC: Registered named UNIX socket transport module.
[ 103.661137] RPC: Registered udp transport module.
[ 103.661137] RPC: Registered tcp transport module.
[ 103.661137] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 103.861622] FS-Cache: Loaded
[ 103.945179] bnx2 0000:04:00.1: eth1: using MSIX
[ 103.960459] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 104.044309] bnx2 0000:04:00.0: eth0: using MSIX
[ 104.059403] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 104.140013] bnx2 0000:05:00.0: eth2: using MSIX
[ 104.155523] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 104.220994] FS-Cache: Netfs 'nfs' registered for caching
[ 104.235674] bnx2 0000:05:00.1: eth3: using MSIX
[ 104.251030] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 104.417233] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 104.875715] fuse init (API version 7.16)
[ 105.175457] DLM installed
[ 107.402578] bnx2 0000:04:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[ 107.430201] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 109.074076] Event-channel device installed.
[ 109.323410] XENBUS: Unable to read cpu state
[ 109.334004] XENBUS: Unable to read cpu state
[ 109.334527] XENBUS: Unable to read cpu state
[ 109.335118] XENBUS: Unable to read cpu state
[ 109.336372] XENBUS: Unable to read cpu state
[ 109.337024] XENBUS: Unable to read cpu state
[ 109.337792] XENBUS: Unable to read cpu state
[ 109.338346] XENBUS: Unable to read cpu state
[ 109.338822] XENBUS: Unable to read cpu state
[ 109.339531] XENBUS: Unable to read cpu state
[ 109.340753] XENBUS: Unable to read cpu state
[ 109.341260] XENBUS: Unable to read cpu state
[ 109.341670] XENBUS: Unable to read cpu state
[ 109.342150] XENBUS: Unable to read cpu state
[ 109.342589] XENBUS: Unable to read cpu state
[ 109.343179] XENBUS: Unable to read cpu state
[ 109.343601] XENBUS: Unable to read cpu state
[ 109.344015] XENBUS: Unable to read cpu state
[ 109.344840] XENBUS: Unable to read cpu state
[ 109.345754] XENBUS: Unable to read cpu state
[ 109.346360] XENBUS: Unable to read cpu state
[ 109.346941] XENBUS: Unable to read cpu state
[ 109.347445] XENBUS: Unable to read cpu state
[ 109.347960] XENBUS: Unable to read cpu state
[ 110.316566] powernow-k8: Found 1 AMD Opteron(tm) Processor 6176 SE (24 cpu cores) (version 2.20.00)
[ 110.316631] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 110.316638] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 110.423403] sshd (3682): /proc/3682/oom_adj is deprecated, please use /proc/3682/oom_score_adj instead.
[ 110.663671] powernow-k8: Found 1 AMD Opteron(tm) Processor 6176 SE (24 cpu cores) (version 2.20.00)
[ 110.663754] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 110.663760] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 111.606827] Ebtables v2.0 registered
[ 111.837771] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 111.983795] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 113.699690] Bridge firewalling registered
[ 114.707470] bnx2 0000:04:00.0: peth0: using MSIX
[ 114.713705] ADDRCONF(NETDEV_UP): peth0: link is not ready
[ 117.498554] bnx2 0000:04:00.0: peth0: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[ 117.507016] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[ 117.841444] device peth0 entered promiscuous mode
[ 117.993914] eth0: port 1(peth0) entering forwarding state
[ 117.993931] eth0: port 1(peth0) entering forwarding state
[ 128.268182] peth0: no IPv6 routers present
[ 128.500156] eth0: no IPv6 routers present
[ 134.352210] usb 6-3: new low speed USB device number 2 using ohci_hcd
[ 134.522319] usb 6-3: New USB device found, idVendor=05ac, idProduct=0304
[ 134.522335] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 134.522347] usb 6-3: Product: Apple Optical USB Mouse
[ 134.522356] usb 6-3: Manufacturer: Mitsumi Electric
[ 134.587212] input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.0/input/input6
[ 134.587631] apple 0003:05AC:0304.0003: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:13.0-3/input0
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 6+ messages in thread