All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 0/2] arm: cleanup board code
@ 2011-06-03  8:11 Heiko Schocher
  2011-06-03  8:11 ` [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup Heiko Schocher
  2011-06-03  8:11 ` [U-Boot] [PATCH 2/2] arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize Heiko Schocher
  0 siblings, 2 replies; 15+ messages in thread
From: Heiko Schocher @ 2011-06-03  8:11 UTC (permalink / raw)
  To: u-boot

fix Coding Style for arch/arm/lib/board.c
use gd->ram_size instead of bd->bi_memsize

Heiko Schocher (2):
  arm, lib/board.c: Coding Style cleanup
  arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize

 arch/arm/lib/board.c |  218 ++++++++++++++++++++++++++------------------------
 1 files changed, 113 insertions(+), 105 deletions(-)

-- 
1.7.4.4

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup
  2011-06-03  8:11 [U-Boot] [PATCH 0/2] arm: cleanup board code Heiko Schocher
@ 2011-06-03  8:11 ` Heiko Schocher
  2011-06-06 11:09   ` Detlev Zundel
                     ` (4 more replies)
  2011-06-03  8:11 ` [U-Boot] [PATCH 2/2] arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize Heiko Schocher
  1 sibling, 5 replies; 15+ messages in thread
From: Heiko Schocher @ 2011-06-03  8:11 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Albert Aribaud <albert.u.boot@aribaud.net>
---
 arch/arm/lib/board.c |  218 ++++++++++++++++++++++++++------------------------
 1 files changed, 113 insertions(+), 105 deletions(-)

diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 1a784a1..05ee71b 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -92,26 +92,28 @@ extern void rtl8019_get_enetaddr (uchar * addr);
  ************************************************************************
  * May be supplied by boards if desired
  */
-void inline __coloured_LED_init (void) {}
-void coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
-void inline __red_LED_on (void) {}
-void red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
-void inline __red_LED_off(void) {}
+inline void __coloured_LED_init(void) {}
+void coloured_LED_init(void)
+__attribute__((weak, alias("__coloured_LED_init")));
+inline void __red_LED_on(void) {}
+void red_LED_on(void) __attribute__((weak, alias("__red_LED_on")));
+inline void __red_LED_off(void) {}
 void red_LED_off(void) __attribute__((weak, alias("__red_LED_off")));
-void inline __green_LED_on(void) {}
+inline void __green_LED_on(void) {}
 void green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
-void inline __green_LED_off(void) {}
+inline void __green_LED_off(void) {}
 void green_LED_off(void) __attribute__((weak, alias("__green_LED_off")));
-void inline __yellow_LED_on(void) {}
+inline void __yellow_LED_on(void) {}
 void yellow_LED_on(void) __attribute__((weak, alias("__yellow_LED_on")));
-void inline __yellow_LED_off(void) {}
+inline void __yellow_LED_off(void) {}
 void yellow_LED_off(void) __attribute__((weak, alias("__yellow_LED_off")));
-void inline __blue_LED_on(void) {}
+inline void __blue_LED_on(void) {}
 void blue_LED_on(void) __attribute__((weak, alias("__blue_LED_on")));
-void inline __blue_LED_off(void) {}
+inline void __blue_LED_off(void) {}
 void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
 
-/************************************************************************
+/*
+ ************************************************************************
  * Init Utilities							*
  ************************************************************************
  * Some of this code should be moved into the core functions,
@@ -122,30 +124,30 @@ void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
 #if defined(CONFIG_ARM_DCC) && !defined(CONFIG_BAUDRATE)
 #define CONFIG_BAUDRATE 115200
 #endif
-static int init_baudrate (void)
+static int init_baudrate(void)
 {
 	char tmp[64];	/* long enough for environment variables */
-	int i = getenv_f("baudrate", tmp, sizeof (tmp));
+	int i = getenv_f("baudrate", tmp, sizeof(tmp));
 
 	gd->baudrate = (i > 0)
-			? (int) simple_strtoul (tmp, NULL, 10)
+			? (int) simple_strtoul(tmp, NULL, 10)
 			: CONFIG_BAUDRATE;
 
 	return (0);
 }
 
-static int display_banner (void)
+static int display_banner(void)
 {
-	printf ("\n\n%s\n\n", version_string);
-	debug ("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
+	printf("\n\n%s\n\n", version_string);
+	debug("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
 	       _TEXT_BASE,
-	       _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE);
+	       _bss_start_ofs + _TEXT_BASE, _bss_end_ofs + _TEXT_BASE);
 #ifdef CONFIG_MODEM_SUPPORT
-	debug ("Modem Support enabled\n");
+	debug("Modem Support enabled\n");
 #endif
 #ifdef CONFIG_USE_IRQ
-	debug ("IRQ Stack: %08lx\n", IRQ_STACK_START);
-	debug ("FIQ Stack: %08lx\n", FIQ_STACK_START);
+	debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
+	debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
 #endif
 
 	return (0);
@@ -158,23 +160,23 @@ static int display_banner (void)
  * gives a simple yet clear indication which part of the
  * initialization if failing.
  */
-static int display_dram_config (void)
+static int display_dram_config(void)
 {
 	int i;
 
 #ifdef DEBUG
-	puts ("RAM Configuration:\n");
+	puts("RAM Configuration:\n");
 
-	for(i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
-		printf ("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
-		print_size (gd->bd->bi_dram[i].size, "\n");
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+		print_size(gd->bd->bi_dram[i].size, "\n");
 	}
 #else
 	ulong size = 0;
 
-	for (i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
 		size += gd->bd->bi_dram[i].size;
-	}
+
 	puts("DRAM:  ");
 	print_size(size, "\n");
 #endif
@@ -183,11 +185,11 @@ static int display_dram_config (void)
 }
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-static int init_func_i2c (void)
+static int init_func_i2c(void)
 {
-	puts ("I2C:   ");
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	puts ("ready\n");
+	puts("I2C:   ");
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	puts("ready\n");
 	return (0);
 }
 #endif
@@ -226,7 +228,7 @@ static int arm_pci_init(void)
  */
 typedef int (init_fnc_t) (void);
 
-int print_cpuinfo (void);
+int print_cpuinfo(void);
 
 void __dram_init_banksize(void)
 {
@@ -268,7 +270,7 @@ init_fnc_t *init_sequence[] = {
 	NULL,
 };
 
-void board_init_f (ulong bootflag)
+void board_init_f(ulong bootflag)
 {
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
@@ -280,7 +282,7 @@ void board_init_f (ulong bootflag)
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-	memset ((void*)gd, 0, sizeof (gd_t));
+	memset((void *)gd, 0, sizeof(gd_t));
 
 	gd->mon_len = _bss_end_ofs;
 
@@ -290,11 +292,11 @@ void board_init_f (ulong bootflag)
 		}
 	}
 
-	debug ("monitor len: %08lX\n", gd->mon_len);
+	debug("monitor len: %08lX\n", gd->mon_len);
 	/*
 	 * Ram is setup, size stored in gd !!
 	 */
-	debug ("ramsize: %08lX\n", gd->ram_size);
+	debug("ramsize: %08lX\n", gd->ram_size);
 #if defined(CONFIG_SYS_MEM_TOP_HIDE)
 	/*
 	 * Subtract specified amount of memory to hide so that it won't
@@ -315,7 +317,8 @@ void board_init_f (ulong bootflag)
 #ifndef CONFIG_ALT_LB_ADDR
 	/* reserve kernel log buffer */
 	addr -= (LOGBUFF_RESERVE);
-	debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
+	debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
+		addr);
 #endif
 #endif
 
@@ -323,10 +326,11 @@ void board_init_f (ulong bootflag)
 	/*
 	 * reserve protected RAM
 	 */
-	i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
-	reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
+	i = getenv_r("pram", (char *)tmp, sizeof(tmp));
+	reg = (i > 0) ? simple_strtoul((const char *)tmp, NULL, 10) :
+		CONFIG_PRAM;
 	addr -= (reg << 10);		/* size is in kB */
-	debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+	debug("Reserving %ldk for protected RAM@%08lx\n", reg, addr);
 #endif /* CONFIG_PRAM */
 
 #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
@@ -337,12 +341,12 @@ void board_init_f (ulong bootflag)
 	addr &= ~(0x10000 - 1);
 
 	gd->tlb_addr = addr;
-	debug ("TLB table at: %08lx\n", addr);
+	debug("TLB table at: %08lx\n", addr);
 #endif
 
 	/* round down to next 4 kB limit */
 	addr &= ~(4096 - 1);
-	debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+	debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
 
 #ifdef CONFIG_VFD
 #	ifndef PAGE_SIZE
@@ -351,7 +355,7 @@ void board_init_f (ulong bootflag)
 	/*
 	 * reserve memory for VFD display (always full pages)
 	 */
-	addr -= vfd_setmem (addr);
+	addr -= vfd_setmem(addr);
 	gd->fb_base = addr;
 #endif /* CONFIG_VFD */
 
@@ -360,7 +364,7 @@ void board_init_f (ulong bootflag)
 	gd->fb_base = CONFIG_FB_ADDR;
 #else
 	/* reserve memory for LCD display (always full pages) */
-	addr = lcd_setmem (addr);
+	addr = lcd_setmem(addr);
 	gd->fb_base = addr;
 #endif /* CONFIG_FB_ADDR */
 #endif /* CONFIG_LCD */
@@ -372,14 +376,14 @@ void board_init_f (ulong bootflag)
 	addr -= gd->mon_len;
 	addr &= ~(4096 - 1);
 
-	debug ("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
+	debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
 
 #ifndef CONFIG_PRELOADER
 	/*
 	 * reserve memory for malloc() arena
 	 */
 	addr_sp = addr - TOTAL_MALLOC_LEN;
-	debug ("Reserving %dk for malloc() at: %08lx\n",
+	debug("Reserving %dk for malloc() at: %08lx\n",
 			TOTAL_MALLOC_LEN >> 10, addr_sp);
 	/*
 	 * (permanently) allocate a Board Info struct
@@ -388,18 +392,18 @@ void board_init_f (ulong bootflag)
 	addr_sp -= sizeof (bd_t);
 	bd = (bd_t *) addr_sp;
 	gd->bd = bd;
-	debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
+	debug("Reserving %zu Bytes for Board Info at: %08lx\n",
 			sizeof (bd_t), addr_sp);
 	addr_sp -= sizeof (gd_t);
 	id = (gd_t *) addr_sp;
-	debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
+	debug("Reserving %zu Bytes for Global Data at: %08lx\n",
 			sizeof (gd_t), addr_sp);
 
 	/* setup stackpointer for exeptions */
 	gd->irq_sp = addr_sp;
 #ifdef CONFIG_USE_IRQ
 	addr_sp -= (CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ);
-	debug ("Reserving %zu Bytes for IRQ stack at: %08lx\n",
+	debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
 		CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp);
 #endif
 	/* leave 3 words for abort-stack    */
@@ -412,11 +416,11 @@ void board_init_f (ulong bootflag)
 	gd->irq_sp = addr_sp;
 #endif
 
-	debug ("New Stack Pointer is: %08lx\n", addr_sp);
+	debug("New Stack Pointer is: %08lx\n", addr_sp);
 
 #ifdef CONFIG_POST
 	post_bootmode_init();
-	post_run (NULL, POST_ROM | post_bootmode_get(0));
+	post_run(NULL, POST_ROM | post_bootmode_get(0));
 #endif
 
 	gd->bd->bi_baudrate = gd->baudrate;
@@ -427,10 +431,10 @@ void board_init_f (ulong bootflag)
 	gd->relocaddr = addr;
 	gd->start_addr_sp = addr_sp;
 	gd->reloc_off = addr - _TEXT_BASE;
-	debug ("relocation Offset is: %08lx\n", gd->reloc_off);
-	memcpy (id, (void *)gd, sizeof (gd_t));
+	debug("relocation Offset is: %08lx\n", gd->reloc_off);
+	memcpy(id, (void *)gd, sizeof(gd_t));
 
-	relocate_code (addr_sp, id, addr);
+	relocate_code(addr_sp, id, addr);
 
 	/* NOTREACHED - relocate_code() does not return */
 }
@@ -439,7 +443,8 @@ void board_init_f (ulong bootflag)
 static char *failed = "*** failed ***\n";
 #endif
 
-/************************************************************************
+/*
+ ************************************************************************
  *
  * This is the next part if the initialization sequence: we are now
  * running from RAM and have a "normal" C environment, i. e. global
@@ -449,7 +454,7 @@ static char *failed = "*** failed ***\n";
  ************************************************************************
  */
 
-void board_init_r (gd_t *id, ulong dest_addr)
+void board_init_r(gd_t *id, ulong dest_addr)
 {
 	char *s;
 	bd_t *bd;
@@ -464,20 +469,20 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
 
 	monitor_flash_len = _end_ofs;
-	debug ("monitor flash len: %08lX\n", monitor_flash_len);
+	debug("monitor flash len: %08lX\n", monitor_flash_len);
 	board_init();	/* Setup chipselects */
 
 #ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
 #endif
 
-	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+	debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
 #ifdef CONFIG_LOGBUFFER
-	logbuff_init_ptrs ();
+	logbuff_init_ptrs();
 #endif
 #ifdef CONFIG_POST
-	post_output_backlog ();
+	post_output_backlog();
 #endif
 
 	/* The Malloc area is immediately below the monitor copy in DRAM */
@@ -485,34 +490,37 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
 
 #if !defined(CONFIG_SYS_NO_FLASH)
-	puts ("Flash: ");
+	puts("Flash: ");
 
-	if ((flash_size = flash_init ()) > 0) {
+	flash_size = flash_init();
+	if (flash_size > 0) {
 # ifdef CONFIG_SYS_FLASH_CHECKSUM
-		print_size (flash_size, "");
+		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		s = getenv ("flashchecksum");
+		s = getenv("flashchecksum");
 		if (s && (*s == 'y')) {
-			printf ("  CRC: %08X",
-				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
+			printf("  CRC: %08X",
+				crc32(0,
+				(const unsigned char *) CONFIG_SYS_FLASH_BASE,
+				flash_size)
 			);
 		}
-		putc ('\n');
+		putc('\n');
 # else	/* !CONFIG_SYS_FLASH_CHECKSUM */
-		print_size (flash_size, "\n");
+		print_size(flash_size, "\n");
 # endif /* CONFIG_SYS_FLASH_CHECKSUM */
 	} else {
-		puts (failed);
-		hang ();
+		puts(failed);
+		hang();
 	}
 #endif
 
 #if defined(CONFIG_CMD_NAND)
-	puts ("NAND:  ");
+	puts("NAND:  ");
 	nand_init();		/* go init the NAND */
 #endif
 
@@ -531,7 +539,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 
 	/* initialize environment */
-	env_relocate ();
+	env_relocate();
 
 #ifdef CONFIG_VFD
 	/* must do this after the framebuffer is allocated */
@@ -539,37 +547,37 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif /* CONFIG_VFD */
 
 	/* IP Address */
-	gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+	gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
 
-	stdio_init ();	/* get the devices list going. */
+	stdio_init();	/* get the devices list going. */
 
-	jumptable_init ();
+	jumptable_init();
 
 #if defined(CONFIG_API)
 	/* Initialize API */
-	api_init ();
+	api_init();
 #endif
 
-	console_init_r ();	/* fully init console as a device */
+	console_init_r();	/* fully init console as a device */
 
 #if defined(CONFIG_ARCH_MISC_INIT)
 	/* miscellaneous arch dependent initialisations */
-	arch_misc_init ();
+	arch_misc_init();
 #endif
 #if defined(CONFIG_MISC_INIT_R)
 	/* miscellaneous platform dependent initialisations */
-	misc_init_r ();
+	misc_init_r();
 #endif
 
 	 /* set up exceptions */
-	interrupt_init ();
+	interrupt_init();
 	/* enable exceptions */
-	enable_interrupts ();
+	enable_interrupts();
 
 	/* Perform network card initialisation if necessary */
 #if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
 	/* XXX: this needs to be moved to board init */
-	if (getenv ("ethaddr")) {
+	if (getenv("ethaddr")) {
 		uchar enetaddr[6];
 		eth_getenv_enetaddr("ethaddr", enetaddr);
 		smc_set_mac_addr(enetaddr);
@@ -577,17 +585,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
 
 	/* Initialize from environment */
-	if ((s = getenv ("loadaddr")) != NULL) {
-		load_addr = simple_strtoul (s, NULL, 16);
-	}
+	s = getenv("loadaddr");
+	if (s != NULL)
+		load_addr = simple_strtoul(s, NULL, 16);
 #if defined(CONFIG_CMD_NET)
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
-	}
+	s = getenv("bootfile");
+	if (s != NULL)
+		copy_filename(BootFile, s, sizeof(BootFile));
 #endif
 
 #ifdef BOARD_LATE_INIT
-	board_late_init ();
+	board_late_init();
 #endif
 
 #ifdef CONFIG_BITBANGMII
@@ -595,17 +603,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 #if defined(CONFIG_CMD_NET)
 #if defined(CONFIG_NET_MULTI)
-	puts ("Net:   ");
+	puts("Net:   ");
 #endif
 	eth_initialize(gd->bd);
 #if defined(CONFIG_RESET_PHY_R)
-	debug ("Reset Ethernet PHY\n");
+	debug("Reset Ethernet PHY\n");
 	reset_phy();
 #endif
 #endif
 
 #ifdef CONFIG_POST
-	post_run (NULL, POST_RAM | post_bootmode_get(0));
+	post_run(NULL, POST_RAM | post_bootmode_get(0));
 #endif
 
 #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
@@ -619,35 +627,35 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #ifdef CONFIG_PRAM
 		char *s;
 
-		if ((s = getenv ("pram")) != NULL) {
-			pram = simple_strtoul (s, NULL, 10);
-		} else {
+		s = getenv("pram");
+		if (s != NULL)
+			pram = simple_strtoul(s, NULL, 10);
+		else
 			pram = CONFIG_PRAM;
-		}
 #else
-		pram=0;
+		pram = 0;
 #endif
 #ifdef CONFIG_LOGBUFFER
 #ifndef CONFIG_ALT_LB_ADDR
 		/* Also take the logbuffer into account (pram is in kB) */
-		pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+		pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
 #endif
 #endif
-		sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
-		setenv ("mem", (char *)memsz);
+		sprintf((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+		setenv("mem", (char *)memsz);
 	}
 #endif
 
 	/* main_loop() can return to retry autoboot, if so just run it again. */
 	for (;;) {
-		main_loop ();
+		main_loop();
 	}
 
 	/* NOTREACHED - no way out of command loop except booting */
 }
 
-void hang (void)
+void hang(void)
 {
-	puts ("### ERROR ### Please RESET the board ###\n");
+	puts("### ERROR ### Please RESET the board ###\n");
 	for (;;);
 }
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 2/2] arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  2011-06-03  8:11 [U-Boot] [PATCH 0/2] arm: cleanup board code Heiko Schocher
  2011-06-03  8:11 ` [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup Heiko Schocher
@ 2011-06-03  8:11 ` Heiko Schocher
  2011-08-05  6:09   ` Heiko Schocher
  2011-08-12 17:56   ` Albert ARIBAUD
  1 sibling, 2 replies; 15+ messages in thread
From: Heiko Schocher @ 2011-06-03  8:11 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Albert Aribaud <albert.u.boot@aribaud.net>
---
 arch/arm/lib/board.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 05ee71b..0acd23b 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -641,7 +641,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 		pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
 #endif
 #endif
-		sprintf((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+		sprintf((char *)memsz, "%ldk", (gd->ram_size / 1024) - pram);
 		setenv("mem", (char *)memsz);
 	}
 #endif
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup
  2011-06-03  8:11 ` [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup Heiko Schocher
@ 2011-06-06 11:09   ` Detlev Zundel
  2011-07-14 16:21   ` Albert ARIBAUD
                     ` (3 subsequent siblings)
  4 siblings, 0 replies; 15+ messages in thread
From: Detlev Zundel @ 2011-06-06 11:09 UTC (permalink / raw)
  To: u-boot

Hallo Heiko,

> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Albert Aribaud <albert.u.boot@aribaud.net>
> ---
>  arch/arm/lib/board.c |  218 ++++++++++++++++++++++++++------------------------
>  1 files changed, 113 insertions(+), 105 deletions(-)

If this is meant to be a patch without any "real" changes, it should be
marked with "cosmetic: " so that people know it does not introduce
functional changes.

The script that I posted a while ago here, indeed makes it easy to check
only the non-whitespace parts and they look good, so

Acked-by: Detlev Zundel <dzu@denx.de>

Cheers
  Detlev

-- 
Each language has its purpose, however humble. Each language expresses
the Yin and Yang of software. Each language has its place within the Tao.
But do not program in COBOL if you can avoid it.
                           -- The Tao of Programming
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup
  2011-06-03  8:11 ` [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup Heiko Schocher
  2011-06-06 11:09   ` Detlev Zundel
@ 2011-07-14 16:21   ` Albert ARIBAUD
  2011-07-15  0:17     ` 馬克泡
  2011-07-15  6:57     ` Heiko Schocher
  2011-07-15  7:03   ` [U-Boot] [PATCH v2 01/02] cosmetic: arm: libboard.c: " Heiko Schocher
                     ` (2 subsequent siblings)
  4 siblings, 2 replies; 15+ messages in thread
From: Albert ARIBAUD @ 2011-07-14 16:21 UTC (permalink / raw)
  To: u-boot

Hi Heiko,

Sorry for having kept this patch unanswered so long. I am now on 
holiday, which means *a bit* more time for U-Boot, so here comes:

Re: patch title, can you make it "arm: libboard.c: ..." rather than 
"arm, libboard.c" ?

Also, make sure you rebase onto latest u-boot-arm/master for next 
version: this one does not apply cleanly ATM.

Le 03/06/2011 10:11, Heiko Schocher a ?crit :

> --- a/arch/arm/lib/board.c
> +++ b/arch/arm/lib/board.c
> @@ -92,26 +92,28 @@ extern void rtl8019_get_enetaddr (uchar * addr);
>    ************************************************************************
>    * May be supplied by boards if desired
>    */
> -void inline __coloured_LED_init (void) {}
> -void coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
> -void inline __red_LED_on (void) {}
> -void red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
> -void inline __red_LED_off(void) {}
> +inline void __coloured_LED_init(void) {}
> +void coloured_LED_init(void)
> +__attribute__((weak, alias("__coloured_LED_init")));

If you break the declaration in several lines, please leave some 
indentation in the second and subsequent lines.

> +inline void __red_LED_on(void) {}
> +void red_LED_on(void) __attribute__((weak, alias("__red_LED_on")));
> +inline void __red_LED_off(void) {}
>   void red_LED_off(void) __attribute__((weak, alias("__red_LED_off")));
> -void inline __green_LED_on(void) {}
> +inline void __green_LED_on(void) {}
>   void green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
> -void inline __green_LED_off(void) {}
> +inline void __green_LED_off(void) {}
>   void green_LED_off(void) __attribute__((weak, alias("__green_LED_off")));
> -void inline __yellow_LED_on(void) {}
> +inline void __yellow_LED_on(void) {}
>   void yellow_LED_on(void) __attribute__((weak, alias("__yellow_LED_on")));
> -void inline __yellow_LED_off(void) {}
> +inline void __yellow_LED_off(void) {}
>   void yellow_LED_off(void) __attribute__((weak, alias("__yellow_LED_off")));
> -void inline __blue_LED_on(void) {}
> +inline void __blue_LED_on(void) {}
>   void blue_LED_on(void) __attribute__((weak, alias("__blue_LED_on")));
> -void inline __blue_LED_off(void) {}
> +inline void __blue_LED_off(void) {}
>   void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
>
> -/************************************************************************
> +/*
> + ************************************************************************
>    * Init Utilities							*
>    ************************************************************************
>    * Some of this code should be moved into the core functions,
> @@ -485,34 +490,37 @@ void board_init_r (gd_t *id, ulong dest_addr)
>   	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
>
>   #if !defined(CONFIG_SYS_NO_FLASH)
> -	puts ("Flash: ");
> +	puts("Flash: ");
>
> -	if ((flash_size = flash_init ())>  0) {
> +	flash_size = flash_init();
> +	if (flash_size>  0) {
>   # ifdef CONFIG_SYS_FLASH_CHECKSUM
> -		print_size (flash_size, "");
> +		print_size(flash_size, "");
>   		/*
>   		 * Compute and print flash CRC if flashchecksum is set to 'y'
>   		 *
>   		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
>   		 */
> -		s = getenv ("flashchecksum");
> +		s = getenv("flashchecksum");
>   		if (s&&  (*s == 'y')) {
> -			printf ("  CRC: %08X",
> -				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
> +			printf("  CRC: %08X",
> +				crc32(0,
> +				(const unsigned char *) CONFIG_SYS_FLASH_BASE,
> +				flash_size)

Pleas indent deeper for the last two lines that belong to the call to crc32.

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup
  2011-07-14 16:21   ` Albert ARIBAUD
@ 2011-07-15  0:17     ` 馬克泡
  2011-07-15  6:57     ` Heiko Schocher
  1 sibling, 0 replies; 15+ messages in thread
From: 馬克泡 @ 2011-07-15  0:17 UTC (permalink / raw)
  To: u-boot

Hi Heiko and Albert,

2011/7/15 Albert ARIBAUD <albert.u.boot@aribaud.net>
>
> Hi Heiko,
>
> Sorry for having kept this patch unanswered so long. I am now on
> holiday, which means *a bit* more time for U-Boot, so here comes:
>
> Re: patch title, can you make it "arm: libboard.c: ..." rather than
> "arm, libboard.c" ?

Just remind both of you here, about the clean up patches,
we have an other prefix for the patch title (subject).

http://www.denx.de/wiki/U-Boot/Patches
General Patch Submission Rules

"Non-functional changes, i.e. whitespace and reformatting changes,
should be done in separate patches marked as cosmetic. This separation
of functional and cosmetic changes greatly facilitates the review
process."

So, please use "cosmetic:" as the beginning prefix of your clear up patch.

>
> Also, make sure you rebase onto latest u-boot-arm/master for next
> version: this one does not apply cleanly ATM.

[deleted]

>
> > - ? ? ? ? ? ? ? ? ? ? printf (" ?CRC: %08X",
> > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
> > + ? ? ? ? ? ? ? ? ? ? printf(" ?CRC: %08X",
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? crc32(0,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? (const unsigned char *) CONFIG_SYS_FLASH_BASE,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? flash_size)
>
> Pleas indent deeper for the last two lines that belong to the call to crc32.
>
> Amicalement,

--
Best regards,
Macpaul Lin

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup
  2011-07-14 16:21   ` Albert ARIBAUD
  2011-07-15  0:17     ` 馬克泡
@ 2011-07-15  6:57     ` Heiko Schocher
  1 sibling, 0 replies; 15+ messages in thread
From: Heiko Schocher @ 2011-07-15  6:57 UTC (permalink / raw)
  To: u-boot

Hello Albert,

Albert ARIBAUD wrote:
> Hi Heiko,
> 
> Sorry for having kept this patch unanswered so long. I am now on
> holiday, which means *a bit* more time for U-Boot, so here comes:
> 
> Re: patch title, can you make it "arm: libboard.c: ..." rather than
> "arm, libboard.c" ?

Yep, do this. Also add "cosmetic" as "macpaul at gmail.com" commented.

> Also, make sure you rebase onto latest u-boot-arm/master for next
> version: this one does not apply cleanly ATM.

Yes, I saw this too now, but at the time I posted the patch,
it applied clean...

> Le 03/06/2011 10:11, Heiko Schocher a ?crit :
> 
>> --- a/arch/arm/lib/board.c
>> +++ b/arch/arm/lib/board.c
>> @@ -92,26 +92,28 @@ extern void rtl8019_get_enetaddr (uchar * addr);
>>   
>> ************************************************************************
>>    * May be supplied by boards if desired
>>    */
>> -void inline __coloured_LED_init (void) {}
>> -void coloured_LED_init (void) __attribute__((weak,
>> alias("__coloured_LED_init")));
>> -void inline __red_LED_on (void) {}
>> -void red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
>> -void inline __red_LED_off(void) {}
>> +inline void __coloured_LED_init(void) {}
>> +void coloured_LED_init(void)
>> +__attribute__((weak, alias("__coloured_LED_init")));
> 
> If you break the declaration in several lines, please leave some
> indentation in the second and subsequent lines.

Ok, fixed.

>> +inline void __red_LED_on(void) {}
>> +void red_LED_on(void) __attribute__((weak, alias("__red_LED_on")));
>> +inline void __red_LED_off(void) {}
>>   void red_LED_off(void) __attribute__((weak, alias("__red_LED_off")));
>> -void inline __green_LED_on(void) {}
>> +inline void __green_LED_on(void) {}
>>   void green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
>> -void inline __green_LED_off(void) {}
>> +inline void __green_LED_off(void) {}
>>   void green_LED_off(void) __attribute__((weak,
>> alias("__green_LED_off")));
>> -void inline __yellow_LED_on(void) {}
>> +inline void __yellow_LED_on(void) {}
>>   void yellow_LED_on(void) __attribute__((weak,
>> alias("__yellow_LED_on")));
>> -void inline __yellow_LED_off(void) {}
>> +inline void __yellow_LED_off(void) {}
>>   void yellow_LED_off(void) __attribute__((weak,
>> alias("__yellow_LED_off")));
>> -void inline __blue_LED_on(void) {}
>> +inline void __blue_LED_on(void) {}
>>   void blue_LED_on(void) __attribute__((weak, alias("__blue_LED_on")));
>> -void inline __blue_LED_off(void) {}
>> +inline void __blue_LED_off(void) {}
>>   void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
>>
>> -/************************************************************************
>>
>> +/*
>> +
>> ************************************************************************
>>    * Init Utilities                            *
>>   
>> ************************************************************************
>>    * Some of this code should be moved into the core functions,
>> @@ -485,34 +490,37 @@ void board_init_r (gd_t *id, ulong dest_addr)
>>       mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
>>
>>   #if !defined(CONFIG_SYS_NO_FLASH)
>> -    puts ("Flash: ");
>> +    puts("Flash: ");
>>
>> -    if ((flash_size = flash_init ())>  0) {
>> +    flash_size = flash_init();
>> +    if (flash_size>  0) {
>>   # ifdef CONFIG_SYS_FLASH_CHECKSUM
>> -        print_size (flash_size, "");
>> +        print_size(flash_size, "");
>>           /*
>>            * Compute and print flash CRC if flashchecksum is set to 'y'
>>            *
>>            * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
>>            */
>> -        s = getenv ("flashchecksum");
>> +        s = getenv("flashchecksum");
>>           if (s&&  (*s == 'y')) {
>> -            printf ("  CRC: %08X",
>> -                crc32 (0, (const unsigned char *)
>> CONFIG_SYS_FLASH_BASE, flash_size)
>> +            printf("  CRC: %08X",
>> +                crc32(0,
>> +                (const unsigned char *) CONFIG_SYS_FLASH_BASE,
>> +                flash_size)
> 
> Pleas indent deeper for the last two lines that belong to the call to
> crc32.

Ups, I think, the crc32 call could be in the previous line! Fixed.

Thanks for the review!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH v2 01/02] cosmetic: arm: libboard.c: Coding Style cleanup
  2011-06-03  8:11 ` [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup Heiko Schocher
  2011-06-06 11:09   ` Detlev Zundel
  2011-07-14 16:21   ` Albert ARIBAUD
@ 2011-07-15  7:03   ` Heiko Schocher
  2011-07-15  7:22     ` Wolfgang Denk
  2011-07-16  5:36   ` [U-Boot] [PATCH v3 01/02] cosmetic: arm: lib/board.c: " Heiko Schocher
  2011-07-27 21:40   ` [U-Boot] [PATCH 1/2] arm, " Wolfgang Denk
  4 siblings, 1 reply; 15+ messages in thread
From: Heiko Schocher @ 2011-07-15  7:03 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
cc: Albert Aribaud <albert.u.boot@aribaud.net>
cc: <macpaul@gmail.com>

---
changes for v2:
  Added Acked-by from Detlev Zundel
  Added comments from Albert Aribaud:
    - fixed some Codingstyle issues
    - changed subject title
  Added comment from macpaul at gmail.com:
    - Add cosmetic to subject title


 arch/arm/lib/board.c |  216 ++++++++++++++++++++++++++------------------------
 1 files changed, 111 insertions(+), 105 deletions(-)

diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index fc52a26..8b11eb1 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -92,26 +92,28 @@ extern void rtl8019_get_enetaddr (uchar * addr);
  ************************************************************************
  * May be supplied by boards if desired
  */
-void inline __coloured_LED_init (void) {}
-void coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
-void inline __red_LED_on (void) {}
-void red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
-void inline __red_LED_off(void) {}
+inline void __coloured_LED_init(void) {}
+void coloured_LED_init(void)
+	__attribute__((weak, alias("__coloured_LED_init")));
+inline void __red_LED_on(void) {}
+void red_LED_on(void) __attribute__((weak, alias("__red_LED_on")));
+inline void __red_LED_off(void) {}
 void red_LED_off(void) __attribute__((weak, alias("__red_LED_off")));
-void inline __green_LED_on(void) {}
+inline void __green_LED_on(void) {}
 void green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
-void inline __green_LED_off(void) {}
+inline void __green_LED_off(void) {}
 void green_LED_off(void) __attribute__((weak, alias("__green_LED_off")));
-void inline __yellow_LED_on(void) {}
+inline void __yellow_LED_on(void) {}
 void yellow_LED_on(void) __attribute__((weak, alias("__yellow_LED_on")));
-void inline __yellow_LED_off(void) {}
+inline void __yellow_LED_off(void) {}
 void yellow_LED_off(void) __attribute__((weak, alias("__yellow_LED_off")));
-void inline __blue_LED_on(void) {}
+inline void __blue_LED_on(void) {}
 void blue_LED_on(void) __attribute__((weak, alias("__blue_LED_on")));
-void inline __blue_LED_off(void) {}
+inline void __blue_LED_off(void) {}
 void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
 
-/************************************************************************
+/*
+ ************************************************************************
  * Init Utilities							*
  ************************************************************************
  * Some of this code should be moved into the core functions,
@@ -122,30 +124,30 @@ void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
 #if defined(CONFIG_ARM_DCC) && !defined(CONFIG_BAUDRATE)
 #define CONFIG_BAUDRATE 115200
 #endif
-static int init_baudrate (void)
+static int init_baudrate(void)
 {
 	char tmp[64];	/* long enough for environment variables */
-	int i = getenv_f("baudrate", tmp, sizeof (tmp));
+	int i = getenv_f("baudrate", tmp, sizeof(tmp));
 
 	gd->baudrate = (i > 0)
-			? (int) simple_strtoul (tmp, NULL, 10)
+			? (int) simple_strtoul(tmp, NULL, 10)
 			: CONFIG_BAUDRATE;
 
 	return (0);
 }
 
-static int display_banner (void)
+static int display_banner(void)
 {
-	printf ("\n\n%s\n\n", version_string);
-	debug ("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
+	printf("\n\n%s\n\n", version_string);
+	debug("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
 	       _TEXT_BASE,
-	       _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE);
+	       _bss_start_ofs + _TEXT_BASE, _bss_end_ofs + _TEXT_BASE);
 #ifdef CONFIG_MODEM_SUPPORT
-	debug ("Modem Support enabled\n");
+	debug("Modem Support enabled\n");
 #endif
 #ifdef CONFIG_USE_IRQ
-	debug ("IRQ Stack: %08lx\n", IRQ_STACK_START);
-	debug ("FIQ Stack: %08lx\n", FIQ_STACK_START);
+	debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
+	debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
 #endif
 
 	return (0);
@@ -158,23 +160,23 @@ static int display_banner (void)
  * gives a simple yet clear indication which part of the
  * initialization if failing.
  */
-static int display_dram_config (void)
+static int display_dram_config(void)
 {
 	int i;
 
 #ifdef DEBUG
-	puts ("RAM Configuration:\n");
+	puts("RAM Configuration:\n");
 
-	for(i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
-		printf ("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
-		print_size (gd->bd->bi_dram[i].size, "\n");
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+		print_size(gd->bd->bi_dram[i].size, "\n");
 	}
 #else
 	ulong size = 0;
 
-	for (i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
 		size += gd->bd->bi_dram[i].size;
-	}
+
 	puts("DRAM:  ");
 	print_size(size, "\n");
 #endif
@@ -183,11 +185,11 @@ static int display_dram_config (void)
 }
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-static int init_func_i2c (void)
+static int init_func_i2c(void)
 {
-	puts ("I2C:   ");
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	puts ("ready\n");
+	puts("I2C:   ");
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	puts("ready\n");
 	return (0);
 }
 #endif
@@ -226,7 +228,7 @@ static int arm_pci_init(void)
  */
 typedef int (init_fnc_t) (void);
 
-int print_cpuinfo (void);
+int print_cpuinfo(void);
 
 void __dram_init_banksize(void)
 {
@@ -265,7 +267,7 @@ init_fnc_t *init_sequence[] = {
 	NULL,
 };
 
-void board_init_f (ulong bootflag)
+void board_init_f(ulong bootflag)
 {
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
@@ -277,7 +279,7 @@ void board_init_f (ulong bootflag)
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-	memset ((void*)gd, 0, sizeof (gd_t));
+	memset((void *)gd, 0, sizeof(gd_t));
 
 	gd->mon_len = _bss_end_ofs;
 
@@ -287,11 +289,11 @@ void board_init_f (ulong bootflag)
 		}
 	}
 
-	debug ("monitor len: %08lX\n", gd->mon_len);
+	debug("monitor len: %08lX\n", gd->mon_len);
 	/*
 	 * Ram is setup, size stored in gd !!
 	 */
-	debug ("ramsize: %08lX\n", gd->ram_size);
+	debug("ramsize: %08lX\n", gd->ram_size);
 #if defined(CONFIG_SYS_MEM_TOP_HIDE)
 	/*
 	 * Subtract specified amount of memory to hide so that it won't
@@ -312,7 +314,8 @@ void board_init_f (ulong bootflag)
 #ifndef CONFIG_ALT_LB_ADDR
 	/* reserve kernel log buffer */
 	addr -= (LOGBUFF_RESERVE);
-	debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
+	debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
+		addr);
 #endif
 #endif
 
@@ -320,10 +323,11 @@ void board_init_f (ulong bootflag)
 	/*
 	 * reserve protected RAM
 	 */
-	i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
-	reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
+	i = getenv_r("pram", (char *)tmp, sizeof(tmp));
+	reg = (i > 0) ? simple_strtoul((const char *)tmp, NULL, 10) :
+		CONFIG_PRAM;
 	addr -= (reg << 10);		/* size is in kB */
-	debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+	debug("Reserving %ldk for protected RAM@%08lx\n", reg, addr);
 #endif /* CONFIG_PRAM */
 
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
@@ -334,19 +338,19 @@ void board_init_f (ulong bootflag)
 	addr &= ~(0x10000 - 1);
 
 	gd->tlb_addr = addr;
-	debug ("TLB table at: %08lx\n", addr);
+	debug("TLB table at: %08lx\n", addr);
 #endif
 
 	/* round down to next 4 kB limit */
 	addr &= ~(4096 - 1);
-	debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+	debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
 
 #ifdef CONFIG_LCD
 #ifdef CONFIG_FB_ADDR
 	gd->fb_base = CONFIG_FB_ADDR;
 #else
 	/* reserve memory for LCD display (always full pages) */
-	addr = lcd_setmem (addr);
+	addr = lcd_setmem(addr);
 	gd->fb_base = addr;
 #endif /* CONFIG_FB_ADDR */
 #endif /* CONFIG_LCD */
@@ -358,14 +362,14 @@ void board_init_f (ulong bootflag)
 	addr -= gd->mon_len;
 	addr &= ~(4096 - 1);
 
-	debug ("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
+	debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
 
 #ifndef CONFIG_PRELOADER
 	/*
 	 * reserve memory for malloc() arena
 	 */
 	addr_sp = addr - TOTAL_MALLOC_LEN;
-	debug ("Reserving %dk for malloc() at: %08lx\n",
+	debug("Reserving %dk for malloc() at: %08lx\n",
 			TOTAL_MALLOC_LEN >> 10, addr_sp);
 	/*
 	 * (permanently) allocate a Board Info struct
@@ -374,18 +378,18 @@ void board_init_f (ulong bootflag)
 	addr_sp -= sizeof (bd_t);
 	bd = (bd_t *) addr_sp;
 	gd->bd = bd;
-	debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
+	debug("Reserving %zu Bytes for Board Info at: %08lx\n",
 			sizeof (bd_t), addr_sp);
 	addr_sp -= sizeof (gd_t);
 	id = (gd_t *) addr_sp;
-	debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
+	debug("Reserving %zu Bytes for Global Data at: %08lx\n",
 			sizeof (gd_t), addr_sp);
 
 	/* setup stackpointer for exeptions */
 	gd->irq_sp = addr_sp;
 #ifdef CONFIG_USE_IRQ
 	addr_sp -= (CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ);
-	debug ("Reserving %zu Bytes for IRQ stack at: %08lx\n",
+	debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
 		CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp);
 #endif
 	/* leave 3 words for abort-stack    */
@@ -398,11 +402,11 @@ void board_init_f (ulong bootflag)
 	gd->irq_sp = addr_sp;
 #endif
 
-	debug ("New Stack Pointer is: %08lx\n", addr_sp);
+	debug("New Stack Pointer is: %08lx\n", addr_sp);
 
 #ifdef CONFIG_POST
 	post_bootmode_init();
-	post_run (NULL, POST_ROM | post_bootmode_get(0));
+	post_run(NULL, POST_ROM | post_bootmode_get(0));
 #endif
 
 	gd->bd->bi_baudrate = gd->baudrate;
@@ -413,10 +417,10 @@ void board_init_f (ulong bootflag)
 	gd->relocaddr = addr;
 	gd->start_addr_sp = addr_sp;
 	gd->reloc_off = addr - _TEXT_BASE;
-	debug ("relocation Offset is: %08lx\n", gd->reloc_off);
-	memcpy (id, (void *)gd, sizeof (gd_t));
+	debug("relocation Offset is: %08lx\n", gd->reloc_off);
+	memcpy(id, (void *)gd, sizeof(gd_t));
 
-	relocate_code (addr_sp, id, addr);
+	relocate_code(addr_sp, id, addr);
 
 	/* NOTREACHED - relocate_code() does not return */
 }
@@ -425,7 +429,8 @@ void board_init_f (ulong bootflag)
 static char *failed = "*** failed ***\n";
 #endif
 
-/************************************************************************
+/*
+ ************************************************************************
  *
  * This is the next part if the initialization sequence: we are now
  * running from RAM and have a "normal" C environment, i. e. global
@@ -435,7 +440,7 @@ static char *failed = "*** failed ***\n";
  ************************************************************************
  */
 
-void board_init_r (gd_t *id, ulong dest_addr)
+void board_init_r(gd_t *id, ulong dest_addr)
 {
 	char *s;
 	bd_t *bd;
@@ -456,20 +461,20 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	 */
 	dcache_enable();
 
-	debug ("monitor flash len: %08lX\n", monitor_flash_len);
+	debug("monitor flash len: %08lX\n", monitor_flash_len);
 	board_init();	/* Setup chipselects */
 
 #ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
 #endif
 
-	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+	debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
 #ifdef CONFIG_LOGBUFFER
-	logbuff_init_ptrs ();
+	logbuff_init_ptrs();
 #endif
 #ifdef CONFIG_POST
-	post_output_backlog ();
+	post_output_backlog();
 #endif
 
 	/* The Malloc area is immediately below the monitor copy in DRAM */
@@ -477,34 +482,35 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
 
 #if !defined(CONFIG_SYS_NO_FLASH)
-	puts ("Flash: ");
+	puts("Flash: ");
 
-	if ((flash_size = flash_init ()) > 0) {
+	flash_size = flash_init();
+	if (flash_size > 0) {
 # ifdef CONFIG_SYS_FLASH_CHECKSUM
-		print_size (flash_size, "");
+		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		s = getenv ("flashchecksum");
+		s = getenv("flashchecksum");
 		if (s && (*s == 'y')) {
-			printf ("  CRC: %08X",
-				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
-			);
+			printf("  CRC: %08X", crc32(0,
+				(const unsigned char *) CONFIG_SYS_FLASH_BASE,
+				flash_size));
 		}
-		putc ('\n');
+		putc('\n');
 # else	/* !CONFIG_SYS_FLASH_CHECKSUM */
-		print_size (flash_size, "\n");
+		print_size(flash_size, "\n");
 # endif /* CONFIG_SYS_FLASH_CHECKSUM */
 	} else {
-		puts (failed);
-		hang ();
+		puts(failed);
+		hang();
 	}
 #endif
 
 #if defined(CONFIG_CMD_NAND)
-	puts ("NAND:  ");
+	puts("NAND:  ");
 	nand_init();		/* go init the NAND */
 #endif
 
@@ -523,44 +529,44 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 
 	/* initialize environment */
-	env_relocate ();
+	env_relocate();
 
 #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
 	arm_pci_init();
 #endif
 
 	/* IP Address */
-	gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+	gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
 
-	stdio_init ();	/* get the devices list going. */
+	stdio_init();	/* get the devices list going. */
 
-	jumptable_init ();
+	jumptable_init();
 
 #if defined(CONFIG_API)
 	/* Initialize API */
-	api_init ();
+	api_init();
 #endif
 
-	console_init_r ();	/* fully init console as a device */
+	console_init_r();	/* fully init console as a device */
 
 #if defined(CONFIG_ARCH_MISC_INIT)
 	/* miscellaneous arch dependent initialisations */
-	arch_misc_init ();
+	arch_misc_init();
 #endif
 #if defined(CONFIG_MISC_INIT_R)
 	/* miscellaneous platform dependent initialisations */
-	misc_init_r ();
+	misc_init_r();
 #endif
 
 	 /* set up exceptions */
-	interrupt_init ();
+	interrupt_init();
 	/* enable exceptions */
-	enable_interrupts ();
+	enable_interrupts();
 
 	/* Perform network card initialisation if necessary */
 #if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
 	/* XXX: this needs to be moved to board init */
-	if (getenv ("ethaddr")) {
+	if (getenv("ethaddr")) {
 		uchar enetaddr[6];
 		eth_getenv_enetaddr("ethaddr", enetaddr);
 		smc_set_mac_addr(enetaddr);
@@ -568,17 +574,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
 
 	/* Initialize from environment */
-	if ((s = getenv ("loadaddr")) != NULL) {
-		load_addr = simple_strtoul (s, NULL, 16);
-	}
+	s = getenv("loadaddr");
+	if (s != NULL)
+		load_addr = simple_strtoul(s, NULL, 16);
 #if defined(CONFIG_CMD_NET)
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
-	}
+	s = getenv("bootfile");
+	if (s != NULL)
+		copy_filename(BootFile, s, sizeof(BootFile));
 #endif
 
 #ifdef BOARD_LATE_INIT
-	board_late_init ();
+	board_late_init();
 #endif
 
 #ifdef CONFIG_BITBANGMII
@@ -586,17 +592,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 #if defined(CONFIG_CMD_NET)
 #if defined(CONFIG_NET_MULTI)
-	puts ("Net:   ");
+	puts("Net:   ");
 #endif
 	eth_initialize(gd->bd);
 #if defined(CONFIG_RESET_PHY_R)
-	debug ("Reset Ethernet PHY\n");
+	debug("Reset Ethernet PHY\n");
 	reset_phy();
 #endif
 #endif
 
 #ifdef CONFIG_POST
-	post_run (NULL, POST_RAM | post_bootmode_get(0));
+	post_run(NULL, POST_RAM | post_bootmode_get(0));
 #endif
 
 #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
@@ -610,35 +616,35 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #ifdef CONFIG_PRAM
 		char *s;
 
-		if ((s = getenv ("pram")) != NULL) {
-			pram = simple_strtoul (s, NULL, 10);
-		} else {
+		s = getenv("pram");
+		if (s != NULL)
+			pram = simple_strtoul(s, NULL, 10);
+		else
 			pram = CONFIG_PRAM;
-		}
 #else
-		pram=0;
+		pram = 0;
 #endif
 #ifdef CONFIG_LOGBUFFER
 #ifndef CONFIG_ALT_LB_ADDR
 		/* Also take the logbuffer into account (pram is in kB) */
-		pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+		pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
 #endif
 #endif
-		sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
-		setenv ("mem", (char *)memsz);
+		sprintf((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+		setenv("mem", (char *)memsz);
 	}
 #endif
 
 	/* main_loop() can return to retry autoboot, if so just run it again. */
 	for (;;) {
-		main_loop ();
+		main_loop();
 	}
 
 	/* NOTREACHED - no way out of command loop except booting */
 }
 
-void hang (void)
+void hang(void)
 {
-	puts ("### ERROR ### Please RESET the board ###\n");
+	puts("### ERROR ### Please RESET the board ###\n");
 	for (;;);
 }
-- 
1.7.6

^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH v2 01/02] cosmetic: arm: libboard.c: Coding Style cleanup
  2011-07-15  7:03   ` [U-Boot] [PATCH v2 01/02] cosmetic: arm: libboard.c: " Heiko Schocher
@ 2011-07-15  7:22     ` Wolfgang Denk
  2011-07-15  7:43       ` Heiko Schocher
  0 siblings, 1 reply; 15+ messages in thread
From: Wolfgang Denk @ 2011-07-15  7:22 UTC (permalink / raw)
  To: u-boot

Dear Heiko Schocher,

In message <1310713420-6076-1-git-send-email-hs@denx.de> you wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Acked-by: Detlev Zundel <dzu@denx.de>
> cc: Albert Aribaud <albert.u.boot@aribaud.net>
> cc: <macpaul@gmail.com>
> 
> ---
> changes for v2:
>   Added Acked-by from Detlev Zundel
>   Added comments from Albert Aribaud:
>     - fixed some Codingstyle issues
>     - changed subject title
>   Added comment from macpaul at gmail.com:
>     - Add cosmetic to subject title
> 
> 
>  arch/arm/lib/board.c |  216 ++++++++++++++++++++++++++------------------------
>  1 files changed, 111 insertions(+), 105 deletions(-)

Sorry, but "libboard.c" appears to be wrong.  Should this not be
"lib/board.c" instead?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The philosophy exam was a piece of cake  -  which  was  a  bit  of  a
surprise, actually, because I was expecting some questions on a sheet
of paper.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH v2 01/02] cosmetic: arm: libboard.c: Coding Style cleanup
  2011-07-15  7:22     ` Wolfgang Denk
@ 2011-07-15  7:43       ` Heiko Schocher
  0 siblings, 0 replies; 15+ messages in thread
From: Heiko Schocher @ 2011-07-15  7:43 UTC (permalink / raw)
  To: u-boot

Hello Wolfgang,

Wolfgang Denk wrote:
> Dear Heiko Schocher,
> 
> In message <1310713420-6076-1-git-send-email-hs@denx.de> you wrote:
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> Acked-by: Detlev Zundel <dzu@denx.de>
>> cc: Albert Aribaud <albert.u.boot@aribaud.net>
>> cc: <macpaul@gmail.com>
>>
>> ---
>> changes for v2:
>>   Added Acked-by from Detlev Zundel
>>   Added comments from Albert Aribaud:
>>     - fixed some Codingstyle issues
>>     - changed subject title
>>   Added comment from macpaul at gmail.com:
>>     - Add cosmetic to subject title
>>
>>
>>  arch/arm/lib/board.c |  216 ++++++++++++++++++++++++++------------------------
>>  1 files changed, 111 insertions(+), 105 deletions(-)
> 
> Sorry, but "libboard.c" appears to be wrong.  Should this not be
> "lib/board.c" instead?

Hehe, you are right, I just copy&pasted from Alberts comment ;-)

Fixed! (waiting for some more coments before posting v3)

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH v3 01/02] cosmetic: arm: lib/board.c: Coding Style cleanup
  2011-06-03  8:11 ` [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup Heiko Schocher
                     ` (2 preceding siblings ...)
  2011-07-15  7:03   ` [U-Boot] [PATCH v2 01/02] cosmetic: arm: libboard.c: " Heiko Schocher
@ 2011-07-16  5:36   ` Heiko Schocher
  2011-07-27 21:40   ` [U-Boot] [PATCH 1/2] arm, " Wolfgang Denk
  4 siblings, 0 replies; 15+ messages in thread
From: Heiko Schocher @ 2011-07-16  5:36 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
cc: Albert Aribaud <albert.u.boot@aribaud.net>
cc: <macpaul@gmail.com>
cc: Wolfgang Denk <wd@denx.de>

---
changes for v2:
  Added Acked-by from Detlev Zundel
  Added comments from Albert Aribaud:
    - fixed some Codingstyle issues
    - changed subject title
  Added comment from macpaul at gmail.com:
    - Add cosmetic to subject title

changes for v3:
  Added comment from Wolfgang Denk:
    - fix copy&paste error in subject title

 arch/arm/lib/board.c |  216 ++++++++++++++++++++++++++------------------------
 1 files changed, 111 insertions(+), 105 deletions(-)

diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index fc52a26..8b11eb1 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -92,26 +92,28 @@ extern void rtl8019_get_enetaddr (uchar * addr);
  ************************************************************************
  * May be supplied by boards if desired
  */
-void inline __coloured_LED_init (void) {}
-void coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
-void inline __red_LED_on (void) {}
-void red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
-void inline __red_LED_off(void) {}
+inline void __coloured_LED_init(void) {}
+void coloured_LED_init(void)
+	__attribute__((weak, alias("__coloured_LED_init")));
+inline void __red_LED_on(void) {}
+void red_LED_on(void) __attribute__((weak, alias("__red_LED_on")));
+inline void __red_LED_off(void) {}
 void red_LED_off(void) __attribute__((weak, alias("__red_LED_off")));
-void inline __green_LED_on(void) {}
+inline void __green_LED_on(void) {}
 void green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
-void inline __green_LED_off(void) {}
+inline void __green_LED_off(void) {}
 void green_LED_off(void) __attribute__((weak, alias("__green_LED_off")));
-void inline __yellow_LED_on(void) {}
+inline void __yellow_LED_on(void) {}
 void yellow_LED_on(void) __attribute__((weak, alias("__yellow_LED_on")));
-void inline __yellow_LED_off(void) {}
+inline void __yellow_LED_off(void) {}
 void yellow_LED_off(void) __attribute__((weak, alias("__yellow_LED_off")));
-void inline __blue_LED_on(void) {}
+inline void __blue_LED_on(void) {}
 void blue_LED_on(void) __attribute__((weak, alias("__blue_LED_on")));
-void inline __blue_LED_off(void) {}
+inline void __blue_LED_off(void) {}
 void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
 
-/************************************************************************
+/*
+ ************************************************************************
  * Init Utilities							*
  ************************************************************************
  * Some of this code should be moved into the core functions,
@@ -122,30 +124,30 @@ void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
 #if defined(CONFIG_ARM_DCC) && !defined(CONFIG_BAUDRATE)
 #define CONFIG_BAUDRATE 115200
 #endif
-static int init_baudrate (void)
+static int init_baudrate(void)
 {
 	char tmp[64];	/* long enough for environment variables */
-	int i = getenv_f("baudrate", tmp, sizeof (tmp));
+	int i = getenv_f("baudrate", tmp, sizeof(tmp));
 
 	gd->baudrate = (i > 0)
-			? (int) simple_strtoul (tmp, NULL, 10)
+			? (int) simple_strtoul(tmp, NULL, 10)
 			: CONFIG_BAUDRATE;
 
 	return (0);
 }
 
-static int display_banner (void)
+static int display_banner(void)
 {
-	printf ("\n\n%s\n\n", version_string);
-	debug ("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
+	printf("\n\n%s\n\n", version_string);
+	debug("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
 	       _TEXT_BASE,
-	       _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE);
+	       _bss_start_ofs + _TEXT_BASE, _bss_end_ofs + _TEXT_BASE);
 #ifdef CONFIG_MODEM_SUPPORT
-	debug ("Modem Support enabled\n");
+	debug("Modem Support enabled\n");
 #endif
 #ifdef CONFIG_USE_IRQ
-	debug ("IRQ Stack: %08lx\n", IRQ_STACK_START);
-	debug ("FIQ Stack: %08lx\n", FIQ_STACK_START);
+	debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
+	debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
 #endif
 
 	return (0);
@@ -158,23 +160,23 @@ static int display_banner (void)
  * gives a simple yet clear indication which part of the
  * initialization if failing.
  */
-static int display_dram_config (void)
+static int display_dram_config(void)
 {
 	int i;
 
 #ifdef DEBUG
-	puts ("RAM Configuration:\n");
+	puts("RAM Configuration:\n");
 
-	for(i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
-		printf ("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
-		print_size (gd->bd->bi_dram[i].size, "\n");
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+		print_size(gd->bd->bi_dram[i].size, "\n");
 	}
 #else
 	ulong size = 0;
 
-	for (i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
 		size += gd->bd->bi_dram[i].size;
-	}
+
 	puts("DRAM:  ");
 	print_size(size, "\n");
 #endif
@@ -183,11 +185,11 @@ static int display_dram_config (void)
 }
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-static int init_func_i2c (void)
+static int init_func_i2c(void)
 {
-	puts ("I2C:   ");
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	puts ("ready\n");
+	puts("I2C:   ");
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	puts("ready\n");
 	return (0);
 }
 #endif
@@ -226,7 +228,7 @@ static int arm_pci_init(void)
  */
 typedef int (init_fnc_t) (void);
 
-int print_cpuinfo (void);
+int print_cpuinfo(void);
 
 void __dram_init_banksize(void)
 {
@@ -265,7 +267,7 @@ init_fnc_t *init_sequence[] = {
 	NULL,
 };
 
-void board_init_f (ulong bootflag)
+void board_init_f(ulong bootflag)
 {
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
@@ -277,7 +279,7 @@ void board_init_f (ulong bootflag)
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-	memset ((void*)gd, 0, sizeof (gd_t));
+	memset((void *)gd, 0, sizeof(gd_t));
 
 	gd->mon_len = _bss_end_ofs;
 
@@ -287,11 +289,11 @@ void board_init_f (ulong bootflag)
 		}
 	}
 
-	debug ("monitor len: %08lX\n", gd->mon_len);
+	debug("monitor len: %08lX\n", gd->mon_len);
 	/*
 	 * Ram is setup, size stored in gd !!
 	 */
-	debug ("ramsize: %08lX\n", gd->ram_size);
+	debug("ramsize: %08lX\n", gd->ram_size);
 #if defined(CONFIG_SYS_MEM_TOP_HIDE)
 	/*
 	 * Subtract specified amount of memory to hide so that it won't
@@ -312,7 +314,8 @@ void board_init_f (ulong bootflag)
 #ifndef CONFIG_ALT_LB_ADDR
 	/* reserve kernel log buffer */
 	addr -= (LOGBUFF_RESERVE);
-	debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
+	debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
+		addr);
 #endif
 #endif
 
@@ -320,10 +323,11 @@ void board_init_f (ulong bootflag)
 	/*
 	 * reserve protected RAM
 	 */
-	i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
-	reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
+	i = getenv_r("pram", (char *)tmp, sizeof(tmp));
+	reg = (i > 0) ? simple_strtoul((const char *)tmp, NULL, 10) :
+		CONFIG_PRAM;
 	addr -= (reg << 10);		/* size is in kB */
-	debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+	debug("Reserving %ldk for protected RAM@%08lx\n", reg, addr);
 #endif /* CONFIG_PRAM */
 
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
@@ -334,19 +338,19 @@ void board_init_f (ulong bootflag)
 	addr &= ~(0x10000 - 1);
 
 	gd->tlb_addr = addr;
-	debug ("TLB table at: %08lx\n", addr);
+	debug("TLB table at: %08lx\n", addr);
 #endif
 
 	/* round down to next 4 kB limit */
 	addr &= ~(4096 - 1);
-	debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+	debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
 
 #ifdef CONFIG_LCD
 #ifdef CONFIG_FB_ADDR
 	gd->fb_base = CONFIG_FB_ADDR;
 #else
 	/* reserve memory for LCD display (always full pages) */
-	addr = lcd_setmem (addr);
+	addr = lcd_setmem(addr);
 	gd->fb_base = addr;
 #endif /* CONFIG_FB_ADDR */
 #endif /* CONFIG_LCD */
@@ -358,14 +362,14 @@ void board_init_f (ulong bootflag)
 	addr -= gd->mon_len;
 	addr &= ~(4096 - 1);
 
-	debug ("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
+	debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
 
 #ifndef CONFIG_PRELOADER
 	/*
 	 * reserve memory for malloc() arena
 	 */
 	addr_sp = addr - TOTAL_MALLOC_LEN;
-	debug ("Reserving %dk for malloc() at: %08lx\n",
+	debug("Reserving %dk for malloc() at: %08lx\n",
 			TOTAL_MALLOC_LEN >> 10, addr_sp);
 	/*
 	 * (permanently) allocate a Board Info struct
@@ -374,18 +378,18 @@ void board_init_f (ulong bootflag)
 	addr_sp -= sizeof (bd_t);
 	bd = (bd_t *) addr_sp;
 	gd->bd = bd;
-	debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
+	debug("Reserving %zu Bytes for Board Info at: %08lx\n",
 			sizeof (bd_t), addr_sp);
 	addr_sp -= sizeof (gd_t);
 	id = (gd_t *) addr_sp;
-	debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
+	debug("Reserving %zu Bytes for Global Data at: %08lx\n",
 			sizeof (gd_t), addr_sp);
 
 	/* setup stackpointer for exeptions */
 	gd->irq_sp = addr_sp;
 #ifdef CONFIG_USE_IRQ
 	addr_sp -= (CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ);
-	debug ("Reserving %zu Bytes for IRQ stack at: %08lx\n",
+	debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
 		CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp);
 #endif
 	/* leave 3 words for abort-stack    */
@@ -398,11 +402,11 @@ void board_init_f (ulong bootflag)
 	gd->irq_sp = addr_sp;
 #endif
 
-	debug ("New Stack Pointer is: %08lx\n", addr_sp);
+	debug("New Stack Pointer is: %08lx\n", addr_sp);
 
 #ifdef CONFIG_POST
 	post_bootmode_init();
-	post_run (NULL, POST_ROM | post_bootmode_get(0));
+	post_run(NULL, POST_ROM | post_bootmode_get(0));
 #endif
 
 	gd->bd->bi_baudrate = gd->baudrate;
@@ -413,10 +417,10 @@ void board_init_f (ulong bootflag)
 	gd->relocaddr = addr;
 	gd->start_addr_sp = addr_sp;
 	gd->reloc_off = addr - _TEXT_BASE;
-	debug ("relocation Offset is: %08lx\n", gd->reloc_off);
-	memcpy (id, (void *)gd, sizeof (gd_t));
+	debug("relocation Offset is: %08lx\n", gd->reloc_off);
+	memcpy(id, (void *)gd, sizeof(gd_t));
 
-	relocate_code (addr_sp, id, addr);
+	relocate_code(addr_sp, id, addr);
 
 	/* NOTREACHED - relocate_code() does not return */
 }
@@ -425,7 +429,8 @@ void board_init_f (ulong bootflag)
 static char *failed = "*** failed ***\n";
 #endif
 
-/************************************************************************
+/*
+ ************************************************************************
  *
  * This is the next part if the initialization sequence: we are now
  * running from RAM and have a "normal" C environment, i. e. global
@@ -435,7 +440,7 @@ static char *failed = "*** failed ***\n";
  ************************************************************************
  */
 
-void board_init_r (gd_t *id, ulong dest_addr)
+void board_init_r(gd_t *id, ulong dest_addr)
 {
 	char *s;
 	bd_t *bd;
@@ -456,20 +461,20 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	 */
 	dcache_enable();
 
-	debug ("monitor flash len: %08lX\n", monitor_flash_len);
+	debug("monitor flash len: %08lX\n", monitor_flash_len);
 	board_init();	/* Setup chipselects */
 
 #ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
 #endif
 
-	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+	debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
 #ifdef CONFIG_LOGBUFFER
-	logbuff_init_ptrs ();
+	logbuff_init_ptrs();
 #endif
 #ifdef CONFIG_POST
-	post_output_backlog ();
+	post_output_backlog();
 #endif
 
 	/* The Malloc area is immediately below the monitor copy in DRAM */
@@ -477,34 +482,35 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
 
 #if !defined(CONFIG_SYS_NO_FLASH)
-	puts ("Flash: ");
+	puts("Flash: ");
 
-	if ((flash_size = flash_init ()) > 0) {
+	flash_size = flash_init();
+	if (flash_size > 0) {
 # ifdef CONFIG_SYS_FLASH_CHECKSUM
-		print_size (flash_size, "");
+		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		s = getenv ("flashchecksum");
+		s = getenv("flashchecksum");
 		if (s && (*s == 'y')) {
-			printf ("  CRC: %08X",
-				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
-			);
+			printf("  CRC: %08X", crc32(0,
+				(const unsigned char *) CONFIG_SYS_FLASH_BASE,
+				flash_size));
 		}
-		putc ('\n');
+		putc('\n');
 # else	/* !CONFIG_SYS_FLASH_CHECKSUM */
-		print_size (flash_size, "\n");
+		print_size(flash_size, "\n");
 # endif /* CONFIG_SYS_FLASH_CHECKSUM */
 	} else {
-		puts (failed);
-		hang ();
+		puts(failed);
+		hang();
 	}
 #endif
 
 #if defined(CONFIG_CMD_NAND)
-	puts ("NAND:  ");
+	puts("NAND:  ");
 	nand_init();		/* go init the NAND */
 #endif
 
@@ -523,44 +529,44 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 
 	/* initialize environment */
-	env_relocate ();
+	env_relocate();
 
 #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
 	arm_pci_init();
 #endif
 
 	/* IP Address */
-	gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+	gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
 
-	stdio_init ();	/* get the devices list going. */
+	stdio_init();	/* get the devices list going. */
 
-	jumptable_init ();
+	jumptable_init();
 
 #if defined(CONFIG_API)
 	/* Initialize API */
-	api_init ();
+	api_init();
 #endif
 
-	console_init_r ();	/* fully init console as a device */
+	console_init_r();	/* fully init console as a device */
 
 #if defined(CONFIG_ARCH_MISC_INIT)
 	/* miscellaneous arch dependent initialisations */
-	arch_misc_init ();
+	arch_misc_init();
 #endif
 #if defined(CONFIG_MISC_INIT_R)
 	/* miscellaneous platform dependent initialisations */
-	misc_init_r ();
+	misc_init_r();
 #endif
 
 	 /* set up exceptions */
-	interrupt_init ();
+	interrupt_init();
 	/* enable exceptions */
-	enable_interrupts ();
+	enable_interrupts();
 
 	/* Perform network card initialisation if necessary */
 #if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
 	/* XXX: this needs to be moved to board init */
-	if (getenv ("ethaddr")) {
+	if (getenv("ethaddr")) {
 		uchar enetaddr[6];
 		eth_getenv_enetaddr("ethaddr", enetaddr);
 		smc_set_mac_addr(enetaddr);
@@ -568,17 +574,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
 
 	/* Initialize from environment */
-	if ((s = getenv ("loadaddr")) != NULL) {
-		load_addr = simple_strtoul (s, NULL, 16);
-	}
+	s = getenv("loadaddr");
+	if (s != NULL)
+		load_addr = simple_strtoul(s, NULL, 16);
 #if defined(CONFIG_CMD_NET)
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
-	}
+	s = getenv("bootfile");
+	if (s != NULL)
+		copy_filename(BootFile, s, sizeof(BootFile));
 #endif
 
 #ifdef BOARD_LATE_INIT
-	board_late_init ();
+	board_late_init();
 #endif
 
 #ifdef CONFIG_BITBANGMII
@@ -586,17 +592,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 #if defined(CONFIG_CMD_NET)
 #if defined(CONFIG_NET_MULTI)
-	puts ("Net:   ");
+	puts("Net:   ");
 #endif
 	eth_initialize(gd->bd);
 #if defined(CONFIG_RESET_PHY_R)
-	debug ("Reset Ethernet PHY\n");
+	debug("Reset Ethernet PHY\n");
 	reset_phy();
 #endif
 #endif
 
 #ifdef CONFIG_POST
-	post_run (NULL, POST_RAM | post_bootmode_get(0));
+	post_run(NULL, POST_RAM | post_bootmode_get(0));
 #endif
 
 #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
@@ -610,35 +616,35 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #ifdef CONFIG_PRAM
 		char *s;
 
-		if ((s = getenv ("pram")) != NULL) {
-			pram = simple_strtoul (s, NULL, 10);
-		} else {
+		s = getenv("pram");
+		if (s != NULL)
+			pram = simple_strtoul(s, NULL, 10);
+		else
 			pram = CONFIG_PRAM;
-		}
 #else
-		pram=0;
+		pram = 0;
 #endif
 #ifdef CONFIG_LOGBUFFER
 #ifndef CONFIG_ALT_LB_ADDR
 		/* Also take the logbuffer into account (pram is in kB) */
-		pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+		pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
 #endif
 #endif
-		sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
-		setenv ("mem", (char *)memsz);
+		sprintf((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+		setenv("mem", (char *)memsz);
 	}
 #endif
 
 	/* main_loop() can return to retry autoboot, if so just run it again. */
 	for (;;) {
-		main_loop ();
+		main_loop();
 	}
 
 	/* NOTREACHED - no way out of command loop except booting */
 }
 
-void hang (void)
+void hang(void)
 {
-	puts ("### ERROR ### Please RESET the board ###\n");
+	puts("### ERROR ### Please RESET the board ###\n");
 	for (;;);
 }
-- 
1.7.6

^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup
  2011-06-03  8:11 ` [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup Heiko Schocher
                     ` (3 preceding siblings ...)
  2011-07-16  5:36   ` [U-Boot] [PATCH v3 01/02] cosmetic: arm: lib/board.c: " Heiko Schocher
@ 2011-07-27 21:40   ` Wolfgang Denk
  2011-08-04 11:40     ` Albert ARIBAUD
  4 siblings, 1 reply; 15+ messages in thread
From: Wolfgang Denk @ 2011-07-27 21:40 UTC (permalink / raw)
  To: u-boot

Dear Albert,

In message <1307088697-12159-2-git-send-email-hs@denx.de> Heiko
Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Albert Aribaud <albert.u.boot@aribaud.net>
> ---
>  arch/arm/lib/board.c |  218 ++++++++++++++++++++++++++------------------------
>  1 files changed, 113 insertions(+), 105 deletions(-)

This is a cosmetic patch (Coding Style cleanup) only.  Are you going
to take it?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Looks clean and obviously correct to me, but then _everything_ I
write always looks obviously correct to me.  - Linus Torvalds in
<Pine.LNX.4.10.10012090054360.791-100000@penguin.transmeta.com>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup
  2011-07-27 21:40   ` [U-Boot] [PATCH 1/2] arm, " Wolfgang Denk
@ 2011-08-04 11:40     ` Albert ARIBAUD
  0 siblings, 0 replies; 15+ messages in thread
From: Albert ARIBAUD @ 2011-08-04 11:40 UTC (permalink / raw)
  To: u-boot

Hi Wolfgang,

On 27/07/2011 23:40, Wolfgang Denk wrote:
> Dear Albert,
>
> In message<1307088697-12159-2-git-send-email-hs@denx.de>  Heiko
> Schocher wrote:
>> Signed-off-by: Heiko Schocher<hs@denx.de>
>> cc: Albert Aribaud<albert.u.boot@aribaud.net>
>> ---
>>   arch/arm/lib/board.c |  218 ++++++++++++++++++++++++++------------------------
>>   1 files changed, 113 insertions(+), 105 deletions(-)
>
> This is a cosmetic patch (Coding Style cleanup) only.  Are you going
> to take it?

As it was originated within the merge window:

Applied to u-boot-arm/master, manually in one place where context had 
changed (CONFIG_PRELOADER has become CONFIG_SPL_BUILD).

> Best regards,
>
> Wolfgang Denk

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 2/2] arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  2011-06-03  8:11 ` [U-Boot] [PATCH 2/2] arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize Heiko Schocher
@ 2011-08-05  6:09   ` Heiko Schocher
  2011-08-12 17:56   ` Albert ARIBAUD
  1 sibling, 0 replies; 15+ messages in thread
From: Heiko Schocher @ 2011-08-05  6:09 UTC (permalink / raw)
  To: u-boot

Hello Albert,

Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Albert Aribaud <albert.u.boot@aribaud.net>
> ---
>  arch/arm/lib/board.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)

Could you apply this patch also, as it is in the same patchserie
as the already apllied patch:

http://patchwork.ozlabs.org/patch/104932/

It fixes a compilererror, if CONFIG_LOGBUFFER is activated.

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [U-Boot] [PATCH 2/2] arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  2011-06-03  8:11 ` [U-Boot] [PATCH 2/2] arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize Heiko Schocher
  2011-08-05  6:09   ` Heiko Schocher
@ 2011-08-12 17:56   ` Albert ARIBAUD
  1 sibling, 0 replies; 15+ messages in thread
From: Albert ARIBAUD @ 2011-08-12 17:56 UTC (permalink / raw)
  To: u-boot

Hi Heiko,

Le 03/06/2011 10:11, Heiko Schocher a ?crit :
> Signed-off-by: Heiko Schocher<hs@denx.de>
> cc: Albert Aribaud<albert.u.boot@aribaud.net>
> ---
>   arch/arm/lib/board.c |    2 +-
>   1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
> index 05ee71b..0acd23b 100644
> --- a/arch/arm/lib/board.c
> +++ b/arch/arm/lib/board.c
> @@ -641,7 +641,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
>   		pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
>   #endif
>   #endif
> -		sprintf((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
> +		sprintf((char *)memsz, "%ldk", (gd->ram_size / 1024) - pram);
>   		setenv("mem", (char *)memsz);
>   	}
>   #endif

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2011-08-12 17:56 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-03  8:11 [U-Boot] [PATCH 0/2] arm: cleanup board code Heiko Schocher
2011-06-03  8:11 ` [U-Boot] [PATCH 1/2] arm, lib/board.c: Coding Style cleanup Heiko Schocher
2011-06-06 11:09   ` Detlev Zundel
2011-07-14 16:21   ` Albert ARIBAUD
2011-07-15  0:17     ` 馬克泡
2011-07-15  6:57     ` Heiko Schocher
2011-07-15  7:03   ` [U-Boot] [PATCH v2 01/02] cosmetic: arm: libboard.c: " Heiko Schocher
2011-07-15  7:22     ` Wolfgang Denk
2011-07-15  7:43       ` Heiko Schocher
2011-07-16  5:36   ` [U-Boot] [PATCH v3 01/02] cosmetic: arm: lib/board.c: " Heiko Schocher
2011-07-27 21:40   ` [U-Boot] [PATCH 1/2] arm, " Wolfgang Denk
2011-08-04 11:40     ` Albert ARIBAUD
2011-06-03  8:11 ` [U-Boot] [PATCH 2/2] arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize Heiko Schocher
2011-08-05  6:09   ` Heiko Schocher
2011-08-12 17:56   ` Albert ARIBAUD

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.