* ASUS U3100 Mini
@ 2012-04-07 18:21 Jan Prunk
2012-04-07 20:15 ` Oliver Schinagl
0 siblings, 1 reply; 7+ messages in thread
From: Jan Prunk @ 2012-04-07 18:21 UTC (permalink / raw)
To: linux-media
Hi !
I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
TV streams with it on Debian. The dongle when its plugged in lights with
the green light. Performing "(dvb)scan" segfaults.
I (partially) followed these guides:
http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
I am using debian testing and it seems the device gets somehow recognised:
[15120.976095] usb 3-1: USB disconnect, device number 2
[15124.716041] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[15124.848958] usb 1-3: New USB device found, idVendor=0b05, idProduct=173f
[15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15124.848970] usb 1-3: Product: ASUS DVBT Tuner
[15124.848974] usb 1-3: Manufacturer: ASUSTeK
[15124.848977] usb 1-3: SerialNumber: 8500500875
[15125.344564] IR NEC protocol handler initialized
[15125.370992] IR RC5(x) protocol handler initialized
[15125.409376] dib0700: loaded with support for 21 different device-types
[15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
in cold state, will try to load a firmware
[15125.412893] IR RC6 protocol handler initialized
[15125.440888] IR JVC protocol handler initialized
[15125.463698] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[15125.465236] IR Sony protocol handler initialized
[15125.468745] IR MCE Keyboard/mouse protocol handler initialized
[15125.473597] lirc_dev: IR Remote Control driver registered, major 249
[15125.474883] IR LIRC bridge handler initialized
[15125.671203] dib0700: firmware started successfully.
[15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
in warm state.
[15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
to the software demuxer.
[15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
DVBT Tuner)
[15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[15126.607078] DiB0070: successfully identified
[15126.708031] Registered IR keymap rc-dib0700-rc5
[15126.708271] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
[15126.709054] rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
[15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
[15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
successfully initialized and connected.
[15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
[15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
4 in libc-2.13.so[b75e2000+156000]
[15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
4 in libc-2.13.so[b7631000+156000]
After this I used the guide at:
http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
Which resulted into:
yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana > ~/.tzap/channels.conf
scanning /usr/share/dvb/dvb-t/si-Ljubljana
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 602000000 0 2 9 3 1 3 0
initial transponder 514000000 0 2 9 3 1 2 0
>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
So I seem to be stuck here.
I please for some guidance here, thank you !
Kind regards,
Jan Prunk
--
Jan Prunk http://www.prunk.si
0x00E80E86 http://pgp.prunk.si
http://AS50763.peeringdb.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ASUS U3100 Mini
2012-04-07 18:21 ASUS U3100 Mini Jan Prunk
@ 2012-04-07 20:15 ` Oliver Schinagl
2012-04-07 21:32 ` Jan Prunk
0 siblings, 1 reply; 7+ messages in thread
From: Oliver Schinagl @ 2012-04-07 20:15 UTC (permalink / raw)
To: Jan Prunk; +Cc: linux-media
Hi Jan,
That page is probably not supported by linux-media and shows support
(currently not working afaik) forthe U3100 mini PLUS. yes, minor
difference in name, huge difference inside. The non-plus is a dib0700
based device, whereas the Plus is a af9035 based device. The non-plus
should work out of the box on most distro's.
Oliver
On 07-04-12 20:21, Jan Prunk wrote:
> Hi !
>
> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
> TV streams with it on Debian. The dongle when its plugged in lights with
> the green light. Performing "(dvb)scan" segfaults.
>
> I (partially) followed these guides:
>
> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
>
> I am using debian testing and it seems the device gets somehow recognised:
>
> [15120.976095] usb 3-1: USB disconnect, device number 2
> [15124.716041] usb 1-3: new high-speed USB device number 5 using ehci_hcd
> [15124.848958] usb 1-3: New USB device found, idVendor=0b05, idProduct=173f
> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
> [15124.848974] usb 1-3: Manufacturer: ASUSTeK
> [15124.848977] usb 1-3: SerialNumber: 8500500875
> [15125.344564] IR NEC protocol handler initialized
> [15125.370992] IR RC5(x) protocol handler initialized
> [15125.409376] dib0700: loaded with support for 21 different device-types
> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
> in cold state, will try to load a firmware
> [15125.412893] IR RC6 protocol handler initialized
> [15125.440888] IR JVC protocol handler initialized
> [15125.463698] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
> [15125.465236] IR Sony protocol handler initialized
> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
> [15125.474883] IR LIRC bridge handler initialized
> [15125.671203] dib0700: firmware started successfully.
> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
> in warm state.
> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
> to the software demuxer.
> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
> DVBT Tuner)
> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
> [15126.607078] DiB0070: successfully identified
> [15126.708031] Registered IR keymap rc-dib0700-rc5
> [15126.708271] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
> successfully initialized and connected.
> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
> 4 in libc-2.13.so[b75e2000+156000]
> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
> 4 in libc-2.13.so[b7631000+156000]
>
> After this I used the guide at:
> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
>
> Which resulted into:
> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana> ~/.tzap/channels.conf
> scanning /usr/share/dvb/dvb-t/si-Ljubljana
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 602000000 0 2 9 3 1 3 0
> initial transponder 514000000 0 2 9 3 1 2 0
>>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> WARNING:>>> tuning failed!!!
>>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
> WARNING:>>> tuning failed!!!
>>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> WARNING:>>> tuning failed!!!
>>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
> WARNING:>>> tuning failed!!!
> ERROR: initial tuning failed
> dumping lists (0 services)
> Done.
>
> So I seem to be stuck here.
>
> I please for some guidance here, thank you !
>
> Kind regards,
> Jan Prunk
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ASUS U3100 Mini
2012-04-07 20:15 ` Oliver Schinagl
@ 2012-04-07 21:32 ` Jan Prunk
2012-04-10 9:32 ` Oliver Schinagl
0 siblings, 1 reply; 7+ messages in thread
From: Jan Prunk @ 2012-04-07 21:32 UTC (permalink / raw)
To: Oliver Schinagl; +Cc: linux-media
Hi Oliver !
Thank you for your quick response.
I assume that mine is a non-plus version.
Do you know how I could proceed tuning the channel list,
which I could then use in the combination with MPlayer ?
Kind regards,
Jan
On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl <oliverlist@schinagl.nl> wrote:
> Hi Jan,
>
> That page is probably not supported by linux-media and shows support
> (currently not working afaik) forthe U3100 mini PLUS. yes, minor difference
> in name, huge difference inside. The non-plus is a dib0700 based device,
> whereas the Plus is a af9035 based device. The non-plus should work out of
> the box on most distro's.
>
> Oliver
>
>
> On 07-04-12 20:21, Jan Prunk wrote:
>>
>> Hi !
>>
>> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
>> TV streams with it on Debian. The dongle when its plugged in lights with
>> the green light. Performing "(dvb)scan" segfaults.
>>
>> I (partially) followed these guides:
>>
>> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
>>
>> I am using debian testing and it seems the device gets somehow recognised:
>>
>> [15120.976095] usb 3-1: USB disconnect, device number 2
>> [15124.716041] usb 1-3: new high-speed USB device number 5 using ehci_hcd
>> [15124.848958] usb 1-3: New USB device found, idVendor=0b05,
>> idProduct=173f
>> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
>> SerialNumber=3
>> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
>> [15124.848974] usb 1-3: Manufacturer: ASUSTeK
>> [15124.848977] usb 1-3: SerialNumber: 8500500875
>> [15125.344564] IR NEC protocol handler initialized
>> [15125.370992] IR RC5(x) protocol handler initialized
>> [15125.409376] dib0700: loaded with support for 21 different device-types
>> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>> in cold state, will try to load a firmware
>> [15125.412893] IR RC6 protocol handler initialized
>> [15125.440888] IR JVC protocol handler initialized
>> [15125.463698] dvb-usb: downloading firmware from file
>> 'dvb-usb-dib0700-1.20.fw'
>> [15125.465236] IR Sony protocol handler initialized
>> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
>> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
>> [15125.474883] IR LIRC bridge handler initialized
>> [15125.671203] dib0700: firmware started successfully.
>> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>> in warm state.
>> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
>> to the software demuxer.
>> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
>> DVBT Tuner)
>> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
>> [15126.607078] DiB0070: successfully identified
>> [15126.708031] Registered IR keymap rc-dib0700-rc5
>> [15126.708271] input: IR-receiver inside an USB DVB receiver as
>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
>> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
>> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
>> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
>> successfully initialized and connected.
>> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
>> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
>> 4 in libc-2.13.so[b75e2000+156000]
>> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
>> 4 in libc-2.13.so[b7631000+156000]
>>
>> After this I used the guide at:
>> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
>>
>> Which resulted into:
>> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana>
>> ~/.tzap/channels.conf
>> scanning /usr/share/dvb/dvb-t/si-Ljubljana
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> initial transponder 602000000 0 2 9 3 1 3 0
>> initial transponder 514000000 0 2 9 3 1 2 0
>>>>>
>>>>> tune to:
>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>
>> WARNING:>>> tuning failed!!!
>>>>>
>>>>> tune to:
>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>>>> (tuning failed)
>>
>> WARNING:>>> tuning failed!!!
>>>>>
>>>>> tune to:
>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>
>> WARNING:>>> tuning failed!!!
>>>>>
>>>>> tune to:
>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>> (tuning failed)
>>
>> WARNING:>>> tuning failed!!!
>> ERROR: initial tuning failed
>> dumping lists (0 services)
>> Done.
>>
>> So I seem to be stuck here.
>>
>> I please for some guidance here, thank you !
>>
>> Kind regards,
>> Jan Prunk
>
>
--
Jan Prunk http://www.prunk.si
0x00E80E86 http://pgp.prunk.si
http://AS50763.peeringdb.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ASUS U3100 Mini
2012-04-07 21:32 ` Jan Prunk
@ 2012-04-10 9:32 ` Oliver Schinagl
2012-04-14 14:43 ` Jan Prunk
0 siblings, 1 reply; 7+ messages in thread
From: Oliver Schinagl @ 2012-04-10 9:32 UTC (permalink / raw)
To: Jan Prunk; +Cc: linux-media
Unfortunatly I am not familiar with the dib0700 device, so not sure if
you need firmware (I assume so, check linuxtv wiki on any dib0700 device.
To test the device in its most basic level, I think w_scan is the best
bet, as it works without any other extra files.
Oliver
On 07-04-12 23:32, Jan Prunk wrote:
> Hi Oliver !
>
> Thank you for your quick response.
>
> I assume that mine is a non-plus version.
> Do you know how I could proceed tuning the channel list,
> which I could then use in the combination with MPlayer ?
>
> Kind regards,
> Jan
>
> On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl<oliverlist@schinagl.nl> wrote:
>> Hi Jan,
>>
>> That page is probably not supported by linux-media and shows support
>> (currently not working afaik) forthe U3100 mini PLUS. yes, minor difference
>> in name, huge difference inside. The non-plus is a dib0700 based device,
>> whereas the Plus is a af9035 based device. The non-plus should work out of
>> the box on most distro's.
>>
>> Oliver
>>
>>
>> On 07-04-12 20:21, Jan Prunk wrote:
>>> Hi !
>>>
>>> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
>>> TV streams with it on Debian. The dongle when its plugged in lights with
>>> the green light. Performing "(dvb)scan" segfaults.
>>>
>>> I (partially) followed these guides:
>>>
>>> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
>>>
>>> I am using debian testing and it seems the device gets somehow recognised:
>>>
>>> [15120.976095] usb 3-1: USB disconnect, device number 2
>>> [15124.716041] usb 1-3: new high-speed USB device number 5 using ehci_hcd
>>> [15124.848958] usb 1-3: New USB device found, idVendor=0b05,
>>> idProduct=173f
>>> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
>>> SerialNumber=3
>>> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
>>> [15124.848974] usb 1-3: Manufacturer: ASUSTeK
>>> [15124.848977] usb 1-3: SerialNumber: 8500500875
>>> [15125.344564] IR NEC protocol handler initialized
>>> [15125.370992] IR RC5(x) protocol handler initialized
>>> [15125.409376] dib0700: loaded with support for 21 different device-types
>>> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>>> in cold state, will try to load a firmware
>>> [15125.412893] IR RC6 protocol handler initialized
>>> [15125.440888] IR JVC protocol handler initialized
>>> [15125.463698] dvb-usb: downloading firmware from file
>>> 'dvb-usb-dib0700-1.20.fw'
>>> [15125.465236] IR Sony protocol handler initialized
>>> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
>>> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
>>> [15125.474883] IR LIRC bridge handler initialized
>>> [15125.671203] dib0700: firmware started successfully.
>>> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>>> in warm state.
>>> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
>>> to the software demuxer.
>>> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
>>> DVBT Tuner)
>>> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
>>> [15126.607078] DiB0070: successfully identified
>>> [15126.708031] Registered IR keymap rc-dib0700-rc5
>>> [15126.708271] input: IR-receiver inside an USB DVB receiver as
>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
>>> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
>>> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
>>> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
>>> successfully initialized and connected.
>>> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
>>> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
>>> 4 in libc-2.13.so[b75e2000+156000]
>>> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
>>> 4 in libc-2.13.so[b7631000+156000]
>>>
>>> After this I used the guide at:
>>> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
>>>
>>> Which resulted into:
>>> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana>
>>> ~/.tzap/channels.conf
>>> scanning /usr/share/dvb/dvb-t/si-Ljubljana
>>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>> initial transponder 602000000 0 2 9 3 1 3 0
>>> initial transponder 514000000 0 2 9 3 1 2 0
>>>>>> tune to:
>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>> WARNING:>>> tuning failed!!!
>>>>>> tune to:
>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>>>>> (tuning failed)
>>> WARNING:>>> tuning failed!!!
>>>>>> tune to:
>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>> WARNING:>>> tuning failed!!!
>>>>>> tune to:
>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>>> (tuning failed)
>>> WARNING:>>> tuning failed!!!
>>> ERROR: initial tuning failed
>>> dumping lists (0 services)
>>> Done.
>>>
>>> So I seem to be stuck here.
>>>
>>> I please for some guidance here, thank you !
>>>
>>> Kind regards,
>>> Jan Prunk
>>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ASUS U3100 Mini
2012-04-10 9:32 ` Oliver Schinagl
@ 2012-04-14 14:43 ` Jan Prunk
2012-04-15 8:26 ` Jan Prunk
0 siblings, 1 reply; 7+ messages in thread
From: Jan Prunk @ 2012-04-14 14:43 UTC (permalink / raw)
To: Oliver Schinagl; +Cc: linux-media
Hello Oliver,
Thank you for your hint.
I have written up a WIKI page for this device, which hasn't been
written earlier.
I am willing to test the device further, if any of the devs can give
me further hints
for that. It's still not in a full working mode. I mean video is
somehow partially visible
with VLC, but I am no expert in fine-tuning the device.
The wiki page is located at
http://linuxtv.org/wiki/index.php/ASUS_My_Cinema-U3100_Mini
I will update the information there, if I will receive any further hints.
Kind regards,
Jan
On Tue, Apr 10, 2012 at 11:32 AM, Oliver Schinagl
<oliver+list@schinagl.nl> wrote:
> Unfortunatly I am not familiar with the dib0700 device, so not sure if you
> need firmware (I assume so, check linuxtv wiki on any dib0700 device.
>
> To test the device in its most basic level, I think w_scan is the best bet,
> as it works without any other extra files.
>
> Oliver
>
>
> On 07-04-12 23:32Hello , Jan Prunk wrote:
>>
>> Hi Oliver !
>>
>> Thank you for your quick response.
>>
>> I assume that mine is a non-plus version.
>> Do you know how I could proceed tuning the channel list,
>> which I could then use in the combination with MPlayer ?
>>
>> Kind regards,
>> Jan
>>
>> On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl<oliverlist@schinagl.nl>
>> wrote:
>>>
>>> Hi Jan,
>>>
>>> That page is probably not supported by linux-media and shows support
>>> (currently not working afaik) forthe U3100 mini PLUS. yes, minor
>>> difference
>>> in name, huge difference inside. The non-plus is a dib0700 based device,
>>> whereas the Plus is a af9035 based device. The non-plus should work out
>>> of
>>> the box on most distro's.
>>>
>>> Oliver
>>>
>>>
>>> On 07-04-12 20:21, Jan Prunk wrote:
>>>>
>>>> Hi !
>>>>
>>>> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
>>>> TV streams with it on Debian. The dongle when its plugged in lights with
>>>> the green light. Performing "(dvb)scan" segfaults.
>>>>
>>>> I (partially) followed these guides:
>>>>
>>>> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
>>>>
>>>> I am using debian testing and it seems the device gets somehow
>>>> recognised:
>>>>
>>>> [15120.976095] usb 3-1: USB disconnect, device number 2
>>>> [15124.716041] usb 1-3: new high-speed USB device number 5 using
>>>> ehci_hcd
>>>> [15124.848958] usb 1-3: New USB device found, idVendor=0b05,
>>>> idProduct=173f
>>>> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
>>>> SerialNumber=3
>>>> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
>>>> [15124.848974] usb 1-3: Manufacturer: ASUSTeK
>>>> [15124.848977] usb 1-3: SerialNumber: 8500500875
>>>> [15125.344564] IR NEC protocol handler initialized
>>>> [15125.370992] IR RC5(x) protocol handler initialized
>>>> [15125.409376] dib0700: loaded with support for 21 different
>>>> device-types
>>>> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>>>> in cold state, will try to load a firmware
>>>> [15125.412893] IR RC6 protocol handler initialized
>>>> [15125.440888] IR JVC protocol handler initialized
>>>> [15125.463698] dvb-usb: downloading firmware from file
>>>> 'dvb-usb-dib0700-1.20.fw'
>>>> [15125.465236] IR Sony protocol handler initialized
>>>> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
>>>> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
>>>> [15125.474883] IR LIRC bridge handler initialized
>>>> [15125.671203] dib0700: firmware started successfully.
>>>> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>>>> in warm state.
>>>> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
>>>> to the software demuxer.
>>>> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
>>>> DVBT Tuner)
>>>> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
>>>> [15126.607078] DiB0070: successfully identified
>>>> [15126.708031] Registered IR keymap rc-dib0700-rc5
>>>> [15126.708271] input: IR-receiver inside an USB DVB receiver as
>>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
>>>> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
>>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
>>>> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
>>>> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
>>>> successfully initialized and connected.
>>>> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
>>>> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
>>>> 4 in libc-2.13.so[b75e2000+156000]
>>>> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
>>>> 4 in libc-2.13.so[b7631000+156000]
>>>>
>>>> After this I used the guide at:
>>>> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
>>>>
>>>> Which resulted into:
>>>> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana>
>>>> ~/.tzap/channels.conf
>>>> scanning /usr/share/dvb/dvb-t/si-Ljubljana
>>>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>>> initial transponder 602000000 0 2 9 3 1 3 0
>>>> initial transponder 514000000 0 2 9 3 1 2 0
>>>>>>>
>>>>>>> tune to:
>>>>>>>
>>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>>>
>>>> WARNING:>>> tuning failed!!!
>>>>>>>
>>>>>>> tune to:
>>>>>>>
>>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>>>>>> (tuning failed)
>>>>
>>>> WARNING:>>> tuning failed!!!
>>>>>>>
>>>>>>> tune to:
>>>>>>>
>>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>
>>>> WARNING:>>> tuning failed!!!
>>>>>>>
>>>>>>> tune to:
>>>>>>>
>>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>>>> (tuning failed)
>>>>
>>>> WARNING:>>> tuning failed!!!
>>>> ERROR: initial tuning failed
>>>> dumping lists (0 services)
>>>> Done.
>>>>
>>>> So I seem to be stuck here.
>>>>
>>>> I please for some guidance here, thank you !
>>>>
>>>> Kind regards,
>>>> Jan Prunk
>>>
>>>
>>
>>
>
--
Jan Prunk http://www.prunk.si
0x00E80E86 http://pgp.prunk.si
http://AS50763.peeringdb.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ASUS U3100 Mini
2012-04-14 14:43 ` Jan Prunk
@ 2012-04-15 8:26 ` Jan Prunk
2012-04-15 18:43 ` Oliver Schinagl
0 siblings, 1 reply; 7+ messages in thread
From: Jan Prunk @ 2012-04-15 8:26 UTC (permalink / raw)
To: Oliver Schinagl; +Cc: linux-media
The trick was with bad reception indoors.
I went testing to the balcony and framedrop dissapeared,
and I get a clear picture.
It seems that the Antenna is too weak in my apartment
to have a clear signal.
Kind regards,
Jan
On Sat, Apr 14, 2012 at 4:43 PM, Jan Prunk <janprunk@gmail.com> wrote:
> Hello Oliver,
>
> Thank you for your hint.
>
> I have written up a WIKI page for this device, which hasn't been
> written earlier.
> I am willing to test the device further, if any of the devs can give
> me further hints
> for that. It's still not in a full working mode. I mean video is
> somehow partially visible
> with VLC, but I am no expert in fine-tuning the device.
>
> The wiki page is located at
> http://linuxtv.org/wiki/index.php/ASUS_My_Cinema-U3100_Mini
>
> I will update the information there, if I will receive any further hints.
>
> Kind regards,
> Jan
>
> On Tue, Apr 10, 2012 at 11:32 AM, Oliver Schinagl
> <oliver+list@schinagl.nl> wrote:
>> Unfortunatly I am not familiar with the dib0700 device, so not sure if you
>> need firmware (I assume so, check linuxtv wiki on any dib0700 device.
>>
>> To test the device in its most basic level, I think w_scan is the best bet,
>> as it works without any other extra files.
>>
>> Oliver
>>
>>
>> On 07-04-12 23:32Hello , Jan Prunk wrote:
>>>
>>> Hi Oliver !
>>>
>>> Thank you for your quick response.
>>>
>>> I assume that mine is a non-plus version.
>>> Do you know how I could proceed tuning the channel list,
>>> which I could then use in the combination with MPlayer ?
>>>
>>> Kind regards,
>>> Jan
>>>
>>> On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl<oliverlist@schinagl.nl>
>>> wrote:
>>>>
>>>> Hi Jan,
>>>>
>>>> That page is probably not supported by linux-media and shows support
>>>> (currently not working afaik) forthe U3100 mini PLUS. yes, minor
>>>> difference
>>>> in name, huge difference inside. The non-plus is a dib0700 based device,
>>>> whereas the Plus is a af9035 based device. The non-plus should work out
>>>> of
>>>> the box on most distro's.
>>>>
>>>> Oliver
>>>>
>>>>
>>>> On 07-04-12 20:21, Jan Prunk wrote:
>>>>>
>>>>> Hi !
>>>>>
>>>>> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
>>>>> TV streams with it on Debian. The dongle when its plugged in lights with
>>>>> the green light. Performing "(dvb)scan" segfaults.
>>>>>
>>>>> I (partially) followed these guides:
>>>>>
>>>>> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
>>>>>
>>>>> I am using debian testing and it seems the device gets somehow
>>>>> recognised:
>>>>>
>>>>> [15120.976095] usb 3-1: USB disconnect, device number 2
>>>>> [15124.716041] usb 1-3: new high-speed USB device number 5 using
>>>>> ehci_hcd
>>>>> [15124.848958] usb 1-3: New USB device found, idVendor=0b05,
>>>>> idProduct=173f
>>>>> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
>>>>> SerialNumber=3
>>>>> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
>>>>> [15124.848974] usb 1-3: Manufacturer: ASUSTeK
>>>>> [15124.848977] usb 1-3: SerialNumber: 8500500875
>>>>> [15125.344564] IR NEC protocol handler initialized
>>>>> [15125.370992] IR RC5(x) protocol handler initialized
>>>>> [15125.409376] dib0700: loaded with support for 21 different
>>>>> device-types
>>>>> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>>>>> in cold state, will try to load a firmware
>>>>> [15125.412893] IR RC6 protocol handler initialized
>>>>> [15125.440888] IR JVC protocol handler initialized
>>>>> [15125.463698] dvb-usb: downloading firmware from file
>>>>> 'dvb-usb-dib0700-1.20.fw'
>>>>> [15125.465236] IR Sony protocol handler initialized
>>>>> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
>>>>> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
>>>>> [15125.474883] IR LIRC bridge handler initialized
>>>>> [15125.671203] dib0700: firmware started successfully.
>>>>> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>>>>> in warm state.
>>>>> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
>>>>> to the software demuxer.
>>>>> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
>>>>> DVBT Tuner)
>>>>> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
>>>>> [15126.607078] DiB0070: successfully identified
>>>>> [15126.708031] Registered IR keymap rc-dib0700-rc5
>>>>> [15126.708271] input: IR-receiver inside an USB DVB receiver as
>>>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
>>>>> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
>>>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
>>>>> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
>>>>> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
>>>>> successfully initialized and connected.
>>>>> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
>>>>> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
>>>>> 4 in libc-2.13.so[b75e2000+156000]
>>>>> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
>>>>> 4 in libc-2.13.so[b7631000+156000]
>>>>>
>>>>> After this I used the guide at:
>>>>> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
>>>>>
>>>>> Which resulted into:
>>>>> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana>
>>>>> ~/.tzap/channels.conf
>>>>> scanning /usr/share/dvb/dvb-t/si-Ljubljana
>>>>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>>>> initial transponder 602000000 0 2 9 3 1 3 0
>>>>> initial transponder 514000000 0 2 9 3 1 2 0
>>>>>>>>
>>>>>>>> tune to:
>>>>>>>>
>>>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>>>>
>>>>> WARNING:>>> tuning failed!!!
>>>>>>>>
>>>>>>>> tune to:
>>>>>>>>
>>>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>>>>>>> (tuning failed)
>>>>>
>>>>> WARNING:>>> tuning failed!!!
>>>>>>>>
>>>>>>>> tune to:
>>>>>>>>
>>>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>>
>>>>> WARNING:>>> tuning failed!!!
>>>>>>>>
>>>>>>>> tune to:
>>>>>>>>
>>>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>>>>> (tuning failed)
>>>>>
>>>>> WARNING:>>> tuning failed!!!
>>>>> ERROR: initial tuning failed
>>>>> dumping lists (0 services)
>>>>> Done.
>>>>>
>>>>> So I seem to be stuck here.
>>>>>
>>>>> I please for some guidance here, thank you !
>>>>>
>>>>> Kind regards,
>>>>> Jan Prunk
>>>>
>>>>
>>>
>>>
>>
>
>
>
> --
> Jan Prunk http://www.prunk.si
> 0x00E80E86 http://pgp.prunk.si
> http://AS50763.peeringdb.com
--
Jan Prunk http://www.prunk.si
0x00E80E86 http://pgp.prunk.si
http://AS50763.peeringdb.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ASUS U3100 Mini
2012-04-15 8:26 ` Jan Prunk
@ 2012-04-15 18:43 ` Oliver Schinagl
0 siblings, 0 replies; 7+ messages in thread
From: Oliver Schinagl @ 2012-04-15 18:43 UTC (permalink / raw)
To: Jan Prunk; +Cc: linux-media
That makes a lot of sense. I had the same issue initially with the plus,
where I would only receive signals if the antenna was near the window.
On 04/15/12 10:26, Jan Prunk wrote:
> The trick was with bad reception indoors.
> I went testing to the balcony and framedrop dissapeared,
> and I get a clear picture.
> It seems that the Antenna is too weak in my apartment
> to have a clear signal.
>
> Kind regards,
> Jan
>
> On Sat, Apr 14, 2012 at 4:43 PM, Jan Prunk<janprunk@gmail.com> wrote:
>> Hello Oliver,
>>
>> Thank you for your hint.
>>
>> I have written up a WIKI page for this device, which hasn't been
>> written earlier.
>> I am willing to test the device further, if any of the devs can give
>> me further hints
>> for that. It's still not in a full working mode. I mean video is
>> somehow partially visible
>> with VLC, but I am no expert in fine-tuning the device.
>>
>> The wiki page is located at
>> http://linuxtv.org/wiki/index.php/ASUS_My_Cinema-U3100_Mini
>>
>> I will update the information there, if I will receive any further hints.
>>
>> Kind regards,
>> Jan
>>
>> On Tue, Apr 10, 2012 at 11:32 AM, Oliver Schinagl
>> <oliver+list@schinagl.nl> wrote:
>>> Unfortunatly I am not familiar with the dib0700 device, so not sure if you
>>> need firmware (I assume so, check linuxtv wiki on any dib0700 device.
>>>
>>> To test the device in its most basic level, I think w_scan is the best bet,
>>> as it works without any other extra files.
>>>
>>> Oliver
>>>
>>>
>>> On 07-04-12 23:32Hello , Jan Prunk wrote:
>>>>
>>>> Hi Oliver !
>>>>
>>>> Thank you for your quick response.
>>>>
>>>> I assume that mine is a non-plus version.
>>>> Do you know how I could proceed tuning the channel list,
>>>> which I could then use in the combination with MPlayer ?
>>>>
>>>> Kind regards,
>>>> Jan
>>>>
>>>> On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl<oliverlist@schinagl.nl>
>>>> wrote:
>>>>>
>>>>> Hi Jan,
>>>>>
>>>>> That page is probably not supported by linux-media and shows support
>>>>> (currently not working afaik) forthe U3100 mini PLUS. yes, minor
>>>>> difference
>>>>> in name, huge difference inside. The non-plus is a dib0700 based device,
>>>>> whereas the Plus is a af9035 based device. The non-plus should work out
>>>>> of
>>>>> the box on most distro's.
>>>>>
>>>>> Oliver
>>>>>
>>>>>
>>>>> On 07-04-12 20:21, Jan Prunk wrote:
>>>>>>
>>>>>> Hi !
>>>>>>
>>>>>> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
>>>>>> TV streams with it on Debian. The dongle when its plugged in lights with
>>>>>> the green light. Performing "(dvb)scan" segfaults.
>>>>>>
>>>>>> I (partially) followed these guides:
>>>>>>
>>>>>> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
>>>>>>
>>>>>> I am using debian testing and it seems the device gets somehow
>>>>>> recognised:
>>>>>>
>>>>>> [15120.976095] usb 3-1: USB disconnect, device number 2
>>>>>> [15124.716041] usb 1-3: new high-speed USB device number 5 using
>>>>>> ehci_hcd
>>>>>> [15124.848958] usb 1-3: New USB device found, idVendor=0b05,
>>>>>> idProduct=173f
>>>>>> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
>>>>>> SerialNumber=3
>>>>>> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
>>>>>> [15124.848974] usb 1-3: Manufacturer: ASUSTeK
>>>>>> [15124.848977] usb 1-3: SerialNumber: 8500500875
>>>>>> [15125.344564] IR NEC protocol handler initialized
>>>>>> [15125.370992] IR RC5(x) protocol handler initialized
>>>>>> [15125.409376] dib0700: loaded with support for 21 different
>>>>>> device-types
>>>>>> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>>>>>> in cold state, will try to load a firmware
>>>>>> [15125.412893] IR RC6 protocol handler initialized
>>>>>> [15125.440888] IR JVC protocol handler initialized
>>>>>> [15125.463698] dvb-usb: downloading firmware from file
>>>>>> 'dvb-usb-dib0700-1.20.fw'
>>>>>> [15125.465236] IR Sony protocol handler initialized
>>>>>> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
>>>>>> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
>>>>>> [15125.474883] IR LIRC bridge handler initialized
>>>>>> [15125.671203] dib0700: firmware started successfully.
>>>>>> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
>>>>>> in warm state.
>>>>>> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
>>>>>> to the software demuxer.
>>>>>> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
>>>>>> DVBT Tuner)
>>>>>> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
>>>>>> [15126.607078] DiB0070: successfully identified
>>>>>> [15126.708031] Registered IR keymap rc-dib0700-rc5
>>>>>> [15126.708271] input: IR-receiver inside an USB DVB receiver as
>>>>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
>>>>>> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
>>>>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
>>>>>> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
>>>>>> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
>>>>>> successfully initialized and connected.
>>>>>> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
>>>>>> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
>>>>>> 4 in libc-2.13.so[b75e2000+156000]
>>>>>> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
>>>>>> 4 in libc-2.13.so[b7631000+156000]
>>>>>>
>>>>>> After this I used the guide at:
>>>>>> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
>>>>>>
>>>>>> Which resulted into:
>>>>>> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana>
>>>>>> ~/.tzap/channels.conf
>>>>>> scanning /usr/share/dvb/dvb-t/si-Ljubljana
>>>>>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>>>>> initial transponder 602000000 0 2 9 3 1 3 0
>>>>>> initial transponder 514000000 0 2 9 3 1 2 0
>>>>>>>>>
>>>>>>>>> tune to:
>>>>>>>>>
>>>>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>>>>>
>>>>>> WARNING:>>> tuning failed!!!
>>>>>>>>>
>>>>>>>>> tune to:
>>>>>>>>>
>>>>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
>>>>>>>>> (tuning failed)
>>>>>>
>>>>>> WARNING:>>> tuning failed!!!
>>>>>>>>>
>>>>>>>>> tune to:
>>>>>>>>>
>>>>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>>>
>>>>>> WARNING:>>> tuning failed!!!
>>>>>>>>>
>>>>>>>>> tune to:
>>>>>>>>>
>>>>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>>>>>> (tuning failed)
>>>>>>
>>>>>> WARNING:>>> tuning failed!!!
>>>>>> ERROR: initial tuning failed
>>>>>> dumping lists (0 services)
>>>>>> Done.
>>>>>>
>>>>>> So I seem to be stuck here.
>>>>>>
>>>>>> I please for some guidance here, thank you !
>>>>>>
>>>>>> Kind regards,
>>>>>> Jan Prunk
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>>
>> --
>> Jan Prunk http://www.prunk.si
>> 0x00E80E86 http://pgp.prunk.si
>> http://AS50763.peeringdb.com
>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-04-15 18:43 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-07 18:21 ASUS U3100 Mini Jan Prunk
2012-04-07 20:15 ` Oliver Schinagl
2012-04-07 21:32 ` Jan Prunk
2012-04-10 9:32 ` Oliver Schinagl
2012-04-14 14:43 ` Jan Prunk
2012-04-15 8:26 ` Jan Prunk
2012-04-15 18:43 ` Oliver Schinagl
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.