* M-Audio FastTrack C400
@ 2012-04-17 12:37 Chris Cavey
[not found] ` <CACckToXF6yW+GzhzJ3zVBKi3e+thwrpDVnFmMCtjQOqePuixZg@mail.gmail.com>
0 siblings, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-04-17 12:37 UTC (permalink / raw)
To: alsa-devel
I'd love to be able to help ALSA support this USB sound device. I've
currently got the device working in a VM on my Ubuntu 12.04 workstation.
I believe I can capture USB packets. Would this be helpful to anyone?
Any pointers on where to get started?
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
[not found] ` <4F8DF29B.9090907@rauros.net>
@ 2012-04-18 1:12 ` Grant Diffey
2012-04-18 7:26 ` Clemens Ladisch
2012-08-18 17:47 ` Mudwalker
0 siblings, 2 replies; 30+ messages in thread
From: Grant Diffey @ 2012-04-18 1:12 UTC (permalink / raw)
To: chris-alsa; +Cc: alsa-devel, Clemens Ladisch, Daniel Mack
So this looks reasonably familiar,
int0 is DFU
int1 is mixer
int2 is audio out
int3 is audio in
int4 is midi
int5 is HID
Quirk should look like the fast track ultra basically. maybe the mixer is
less broken in this device?
Should we start with just QUIRK_STANDARD_AUDIO_INTERFACE or copy the whole
data section from the Ultra quirk?
This has isosyncronous feedback for clock control needs current sound tree
usb-audio tree
Grant
On Wed, Apr 18, 2012 at 8:45 AM, Chris Cavey <chris-alsa@rauros.net> wrote:
> Will to help with development, may need pointers to get started and
> willing to test things. I am mostly concerned with simple playback.
> Recording, DSP, and Midi can all come later if at all.
>
> As requested the output of sudo lsusb -v -d 0763:2030"
>
> Bus 002 Device 003: ID 0763:2030 Midiman
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 239 Miscellaneous Device
> bDeviceSubClass 2 ?
> bDeviceProtocol 1 Interface Association
> bMaxPacketSize0 64
> idVendor 0x0763 Midiman
> idProduct 0x2030
> bcdDevice 1.01
> iManufacturer 1 M-Audio
> iProduct 2 Fast Track C400
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 455
> bNumInterfaces 6
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 0
> bInterfaceClass 254 Application Specific Interface
> bInterfaceSubClass 1 Device Firmware Update
> bInterfaceProtocol 0
> iInterface 6 Fast Track C400 DFU
> Device Firmware Upgrade Interface Descriptor:
> bLength 9
> bDescriptorType 33
> bmAttributes 1
> Will Not Detach
> Manifestation Intolerant
> Upload Unsupported
> Download Supported
> wDetachTimeout 2000 milliseconds
> wTransferSize 1024 bytes
> bcdDFUVersion 1.10
> Interface Association:
> bLength 8
> bDescriptorType 11
> bFirstInterface 1
> bInterfaceCount 4
> bFunctionClass 255 Vendor Specific Class
> bFunctionSubClass 0
> bFunctionProtocol 32
> iFunction 2 Fast Track C400
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 0
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 1
> bInterfaceProtocol 32
> iInterface 2 Fast Track C400
> ** UNRECOGNIZED: 09 24 01 00 02 0a a3 00 00
> ** UNRECOGNIZED: 09 24 0b 80 02 81 82 03 00
> ** UNRECOGNIZED: 08 24 0a 81 03 03 03 00
> ** UNRECOGNIZED: 08 24 0a 82 00 05 03 00
> ** UNRECOGNIZED: 11 24 02 00 01 01 00 80 06 00 00 00 00 00 00 00 00
> ** UNRECOGNIZED: 0c 24 03 01 01 01 00 02 80 00 00 00
> ** UNRECOGNIZED: 11 24 02 02 03 06 00 80 04 00 00 00 00 00 00 00 00
> ** UNRECOGNIZED: 0c 24 03 03 03 06 00 40 80 00 00 00
> ** UNRECOGNIZED: 11 24 09 20 00 00 02 02 00 04 00 00 00 00 00 00 00
> ** UNRECOGNIZED: 15 24 04 40 03 02 00 43 04 00 00 00 00 00 ff ff ff
> ff 0f 00 00
> ** UNRECOGNIZED: 10 24 04 42 02 02 00 01 00 00 00 00 00 ff 00 00
> ** UNRECOGNIZED: 10 24 07 43 02 00 42 fd 03 00 00 fd 03 00 00 00
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 0
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 2
> bInterfaceProtocol 32
> iInterface 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 1
> bNumEndpoints 1
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 2
> bInterfaceProtocol 32
> iInterface 4 Line
> ** UNRECOGNIZED: 10 24 01 00 00 01 01 00 00 00 06 00 00 00 00 00
> ** UNRECOGNIZED: 06 24 02 01 03 18
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 37
> Transfer Type Isochronous
> Synch Type Asynchronous
> Usage Type Implicit feedback Data
> wMaxPacketSize 0x00ea 1x 234 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 2
> bNumEndpoints 1
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 2
> bInterfaceProtocol 32
> iInterface 4 Line
> ** UNRECOGNIZED: 10 24 01 00 00 01 d0 00 00 00 02 00 00 00 00 00
> ** UNRECOGNIZED: 06 24 02 03 02 10
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 37
> Transfer Type Isochronous
> Synch Type Asynchronous
> Usage Type Implicit feedback Data
> wMaxPacketSize 0x004e 1x 78 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 0
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 2
> bInterfaceProtocol 32
> iInterface 4 Line
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 1
> bNumEndpoints 1
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 2
> bInterfaceProtocol 32
> iInterface 4 Line
> ** UNRECOGNIZED: 10 24 01 00 00 01 01 00 00 00 04 00 00 00 00 00
> ** UNRECOGNIZED: 06 24 02 01 03 18
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 5
> Transfer Type Isochronous
> Synch Type Asynchronous
> Usage Type Data
> wMaxPacketSize 0x009c 1x 156 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 4
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 1 Audio
> bInterfaceSubClass 3 MIDI Streaming
> bInterfaceProtocol 0
> iInterface 0
> MIDIStreaming Interface Descriptor:
> bLength 7
> bDescriptorType 36
> bDescriptorSubtype 1 (HEADER)
> bcdADC 1.00
> wTotalLength 35
> MIDIStreaming Interface Descriptor:
> bLength 6
> bDescriptorType 36
> bDescriptorSubtype 2 (MIDI_IN_JACK)
> bJackType 1 Embedded
> bJackID 1
> iJack 0
> MIDIStreaming Interface Descriptor:
> bLength 6
> bDescriptorType 36
> bDescriptorSubtype 2 (MIDI_IN_JACK)
> bJackType 2 External
> bJackID 2
> iJack 0
> MIDIStreaming Interface Descriptor:
> bLength 8
> bDescriptorType 36
> bDescriptorSubtype 3 (MIDI_OUT_JACK)
> Warning: Descriptor too short
> bJackType 1 Embedded
> bJackID 3
> bNrInputPins 1
> baSourceID( 0) 2
> BaSourcePin( 0) 1
> iJack 8
> MIDIStreaming Interface Descriptor:
> bLength 8
> bDescriptorType 36
> bDescriptorSubtype 3 (MIDI_OUT_JACK)
> Warning: Descriptor too short
> bJackType 2 External
> bJackID 4
> bNrInputPins 1
> baSourceID( 0) 1
> BaSourcePin( 0) 1
> iJack 105
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x07 EP 7 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> MIDIStreaming Endpoint Descriptor:
> bLength 5
> bDescriptorType 37
> bDescriptorSubtype 1 (GENERAL)
> bNumEmbMIDIJack 1
> baAssocJackID( 0) 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x87 EP 7 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> MIDIStreaming Endpoint Descriptor:
> bLength 5
> bDescriptorType 37
> bDescriptorSubtype 1 (GENERAL)
> bNumEmbMIDIJack 1
> baAssocJackID( 0) 3
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 5
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 0 No Subclass
> bInterfaceProtocol 1 Keyboard
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.10
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 63
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x86 EP 6 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 8
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 239 Miscellaneous Device
> bDeviceSubClass 2 ?
> bDeviceProtocol 1 Interface Association
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
>
> On 04/17/2012 09:15 AM, Grant Diffey wrote:
>
> start with an lsusb -v -d (vid:pid) pasted here
>
> On Tue, Apr 17, 2012 at 10:37 PM, Chris Cavey <chris-alsa@rauros.net>wrote:
>
>> I'd love to be able to help ALSA support this USB sound device. I've
>> currently got the device working in a VM on my Ubuntu 12.04 workstation.
>> I believe I can capture USB packets. Would this be helpful to anyone?
>> Any pointers on where to get started?
>> _______________________________________________
>> Alsa-devel mailing list
>> Alsa-devel@alsa-project.org
>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>>
>
>
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-18 1:12 ` Grant Diffey
@ 2012-04-18 7:26 ` Clemens Ladisch
2012-04-19 2:01 ` Chris Cavey
2012-08-18 17:47 ` Mudwalker
1 sibling, 1 reply; 30+ messages in thread
From: Clemens Ladisch @ 2012-04-18 7:26 UTC (permalink / raw)
To: Grant Diffey; +Cc: alsa-devel, chris-alsa, Daniel Mack
Grant Diffey wrote:
> So this looks reasonably familiar,
>
> int0 is DFU
> int1 is mixer
> int2 is audio out
> int3 is audio in
> int4 is midi
> int5 is HID
>
> Quirk should look like the fast track ultra basically. maybe the mixer is less broken in this device?
There only one way to find out. :)
{
USB_DEVICE_VENDOR_SPEC(0x0763, 0x2030),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
/* .vendor_name = "M-Audio", */
/* .product_name = "Fast Track C400", */
.ifnum = QUIRK_ANY_INTERFACE,
.type = QUIRK_COMPOSITE,
.data = & (const struct snd_usb_audio_quirk[]) {
{
.ifnum = 1,
.type = QUIRK_AUDIO_STANDARD_MIXER,
},
{
.ifnum = 2,
.type = QUIRK_AUDIO_STANDARD_INTERFACE,
},
{
.ifnum = 3,
.type = QUIRK_AUDIO_STANDARD_INTERFACE,
},
/* interface 4 (MIDI) is standard compliant */
{
.ifnum = -1
}
}
}
},
Chris, add this to sound/usb/quirks-table.h and recompile the kernel.
Regards,
Clemens
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-18 7:26 ` Clemens Ladisch
@ 2012-04-19 2:01 ` Chris Cavey
2012-04-19 7:58 ` Chris Cavey
2012-04-19 8:53 ` Clemens Ladisch
0 siblings, 2 replies; 30+ messages in thread
From: Chris Cavey @ 2012-04-19 2:01 UTC (permalink / raw)
To: Clemens Ladisch; +Cc: Grant Diffey, alsa-devel, Daniel Mack
Stood up a new Ubuntu 12.04 VM and built alsa from 1.0.25 with the patch
listed. I'm using VirtualBox with USB passthrough. This works fine when
using the device in Win7 so I figured it would serve as good way to test
the device without mucking around on my desktop.
After "alsa force-reload":
snd-usb-audio: probe of 1-1:1.1 failed with error -5
snd-usb-audio: probe of 1-1:1.2 failed with error -5
snd-usb-audio: probe of 1-1:1.3 failed with error -5
Thoughts?
On 04/18/2012 03:26 AM, Clemens Ladisch wrote:
> Grant Diffey wrote:
>> So this looks reasonably familiar,
>>
>> int0 is DFU
>> int1 is mixer
>> int2 is audio out
>> int3 is audio in
>> int4 is midi
>> int5 is HID
>>
>> Quirk should look like the fast track ultra basically. maybe the mixer is less broken in this device?
> There only one way to find out. :)
>
> {
> USB_DEVICE_VENDOR_SPEC(0x0763, 0x2030),
> .driver_info = (unsigned long)& (const struct snd_usb_audio_quirk) {
> /* .vendor_name = "M-Audio", */
> /* .product_name = "Fast Track C400", */
> .ifnum = QUIRK_ANY_INTERFACE,
> .type = QUIRK_COMPOSITE,
> .data =& (const struct snd_usb_audio_quirk[]) {
> {
> .ifnum = 1,
> .type = QUIRK_AUDIO_STANDARD_MIXER,
> },
> {
> .ifnum = 2,
> .type = QUIRK_AUDIO_STANDARD_INTERFACE,
> },
> {
> .ifnum = 3,
> .type = QUIRK_AUDIO_STANDARD_INTERFACE,
> },
> /* interface 4 (MIDI) is standard compliant */
> {
> .ifnum = -1
> }
> }
> }
> },
>
>
> Chris, add this to sound/usb/quirks-table.h and recompile the kernel.
>
>
> Regards,
> Clemens
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-19 2:01 ` Chris Cavey
@ 2012-04-19 7:58 ` Chris Cavey
2012-04-19 8:53 ` Clemens Ladisch
1 sibling, 0 replies; 30+ messages in thread
From: Chris Cavey @ 2012-04-19 7:58 UTC (permalink / raw)
To: alsa-devel
I had been building from stable 1.0.25. I've since tried using the
latest git master. I've also tried copying to the Fast Track Ultra (with
adjusted channel/interface numbers). None of these combinations work. I
get the same -5 (EIO?) error every time I force reload.
Hopefully the VM passthrough isn't causing the problem.
On 04/18/2012 10:01 PM, Chris Cavey wrote:
> Stood up a new Ubuntu 12.04 VM and built alsa from 1.0.25 with the patch
> listed. I'm using VirtualBox with USB passthrough. This works fine when
> using the device in Win7 so I figured it would serve as good way to test
> the device without mucking around on my desktop.
>
> After "alsa force-reload":
>
> snd-usb-audio: probe of 1-1:1.1 failed with error -5
> snd-usb-audio: probe of 1-1:1.2 failed with error -5
> snd-usb-audio: probe of 1-1:1.3 failed with error -5
>
> Thoughts?
>
> On 04/18/2012 03:26 AM, Clemens Ladisch wrote:
>> Grant Diffey wrote:
>>> So this looks reasonably familiar,
>>>
>>> int0 is DFU
>>> int1 is mixer
>>> int2 is audio out
>>> int3 is audio in
>>> int4 is midi
>>> int5 is HID
>>>
>>> Quirk should look like the fast track ultra basically. maybe the mixer is less broken in this device?
>> There only one way to find out. :)
>>
>> {
>> USB_DEVICE_VENDOR_SPEC(0x0763, 0x2030),
>> .driver_info = (unsigned long)& (const struct snd_usb_audio_quirk) {
>> /* .vendor_name = "M-Audio", */
>> /* .product_name = "Fast Track C400", */
>> .ifnum = QUIRK_ANY_INTERFACE,
>> .type = QUIRK_COMPOSITE,
>> .data =& (const struct snd_usb_audio_quirk[]) {
>> {
>> .ifnum = 1,
>> .type = QUIRK_AUDIO_STANDARD_MIXER,
>> },
>> {
>> .ifnum = 2,
>> .type = QUIRK_AUDIO_STANDARD_INTERFACE,
>> },
>> {
>> .ifnum = 3,
>> .type = QUIRK_AUDIO_STANDARD_INTERFACE,
>> },
>> /* interface 4 (MIDI) is standard compliant */
>> {
>> .ifnum = -1
>> }
>> }
>> }
>> },
>>
>>
>> Chris, add this to sound/usb/quirks-table.h and recompile the kernel.
>>
>>
>> Regards,
>> Clemens
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-19 2:01 ` Chris Cavey
2012-04-19 7:58 ` Chris Cavey
@ 2012-04-19 8:53 ` Clemens Ladisch
2012-04-19 10:26 ` Chris Cavey
2012-04-20 7:54 ` Daniel Mack
1 sibling, 2 replies; 30+ messages in thread
From: Clemens Ladisch @ 2012-04-19 8:53 UTC (permalink / raw)
To: chris-alsa; +Cc: Grant Diffey, alsa-devel, Daniel Mack
Chris Cavey wrote:
> snd-usb-audio: probe of 1-1:1.1 failed with error -5
> snd-usb-audio: probe of 1-1:1.2 failed with error -5
> snd-usb-audio: probe of 1-1:1.3 failed with error -5
Are there no other messages immediately before this?
Daniel, are there places where the code aborts without
print an error message?
Regards,
Clemens
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-19 8:53 ` Clemens Ladisch
@ 2012-04-19 10:26 ` Chris Cavey
2012-04-19 11:09 ` Grant Diffey
2012-04-20 7:54 ` Daniel Mack
1 sibling, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-04-19 10:26 UTC (permalink / raw)
To: alsa-devel
Complete snippet from the log
[ 374.104138] usbcore: deregistering interface driver snd-usb-audio
[ 374.875660] snd-usb-audio: probe of 1-1:1.1 failed with error -5
[ 374.881649] snd-usb-audio: probe of 1-1:1.2 failed with error -5
[ 374.887654] snd-usb-audio: probe of 1-1:1.3 failed with error -5
[ 374.895366] usbcore: registered new interface driver snd-usb-audio
Sidenote - While I don't have a midi device to test with, it would
appear that the midi portion registers correctly and is accessible (at
least through amidi and aplaymidi)
On 04/19/2012 04:53 AM, Clemens Ladisch wrote:
> Chris Cavey wrote:
>> snd-usb-audio: probe of 1-1:1.1 failed with error -5
>> snd-usb-audio: probe of 1-1:1.2 failed with error -5
>> snd-usb-audio: probe of 1-1:1.3 failed with error -5
> Are there no other messages immediately before this?
>
> Daniel, are there places where the code aborts without
> print an error message?
>
>
> Regards,
> Clemens
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-19 10:26 ` Chris Cavey
@ 2012-04-19 11:09 ` Grant Diffey
2012-04-19 11:19 ` Chris Cavey
0 siblings, 1 reply; 30+ messages in thread
From: Grant Diffey @ 2012-04-19 11:09 UTC (permalink / raw)
To: chris-alsa; +Cc: alsa-devel
On Thu, Apr 19, 2012 at 8:26 PM, Chris Cavey <chris-alsa@rauros.net> wrote:
> Complete snippet from the log
>
> [ 374.104138] usbcore: deregistering interface driver snd-usb-audio
> [ 374.875660] snd-usb-audio: probe of 1-1:1.1 failed with error -5
> [ 374.881649] snd-usb-audio: probe of 1-1:1.2 failed with error -5
> [ 374.887654] snd-usb-audio: probe of 1-1:1.3 failed with error -5
> [ 374.895366] usbcore: registered new interface driver snd-usb-audio
>
> Sidenote - While I don't have a midi device to test with, it would
> appear that the midi portion registers correctly and is accessible (at
> least through amidi and aplaymidi)
>
> On 04/19/2012 04:53 AM, Clemens Ladisch wrote:
> > Chris Cavey wrote:
> >> snd-usb-audio: probe of 1-1:1.1 failed with error -5
> >> snd-usb-audio: probe of 1-1:1.2 failed with error -5
> >> snd-usb-audio: probe of 1-1:1.3 failed with error -5
> > Are there no other messages immediately before this?
> >
>
that looks like a snippet on unload can I have another 10 lines either side?
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-19 11:09 ` Grant Diffey
@ 2012-04-19 11:19 ` Chris Cavey
[not found] ` <CACckToXHxm0y28ir+HGjE+Wug9PusHdrOeJpb3zQAFgQLjdP5w@mail.gmail.com>
0 siblings, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-04-19 11:19 UTC (permalink / raw)
To: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 28999 bytes --]
entire log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc
version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10
20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic
root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff88000009fff0] 9fff0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfff0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfff0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfff0000 @
1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @
dffea000-dfff0000
[ 0.000000] RAMDISK: 364ec000 - 3726e000
[ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 00000000dfff0030 0003C (v01 VBOX VBOXXSDT
00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000dfff00f0 000F4 (v04 VBOX VBOXFACP
00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000dfff0480 01B96 (v01 VBOX VBOXBIOS
00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfff0200 00040
[ 0.000000] ACPI: APIC 00000000dfff0240 0006C (v02 VBOX VBOXAPIC
00000001 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000dfff02b0 001CC (v01 VBOX VBOXCPUT
00000002 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD ->
[ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfff0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048447
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 897072 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfff0000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:1ffc0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256
nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83072
r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1030010
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic
root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4032084k/4718592k available (6566k kernel code,
524804k absent, 161704k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3385.153 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6770.30 BogoMIPS (lpj=13540612)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004023] Security Framework initialized
[ 0.004033] AppArmor: AppArmor initialized
[ 0.004035] Yama: becoming mindful.
[ 0.004588] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.005520] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.005792] Mount-cache hash table entries: 256
[ 0.005903] Initializing cgroup subsys cpuacct
[ 0.005908] Initializing cgroup subsys memory
[ 0.005913] Initializing cgroup subsys devices
[ 0.005916] Initializing cgroup subsys freezer
[ 0.005918] Initializing cgroup subsys blkio
[ 0.005922] Initializing cgroup subsys perf_event
[ 0.006124] CPU: Physical Processor ID: 0
[ 0.006127] CPU: Processor Core ID: 0
[ 0.006143] mce: CPU supports 0 MCE banks
[ 0.024772] ACPI: Core revision 20110623
[ 0.025296] ftrace: allocating 27049 entries in 107 pages
[ 0.036357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076499] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[ 0.080004] Performance Events: unsupported p6 CPU model 42 no PMU
driver, software events only.
[ 0.080004] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.080004] Booting Node 0, Processors #1
[ 0.080004] smpboot cpu 1: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.168009] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.168009] Measured 195227 cycles TSC warp between CPUs, turning off
TSC clock.
[ 0.168009] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.168030] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.168227] #2
[ 0.168228] smpboot cpu 2: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.256324] NMI watchdog disabled (cpu2): hardware events not enabled
[ 0.256528] #3 Ok.
[ 0.256529] smpboot cpu 3: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.344331] NMI watchdog disabled (cpu3): hardware events not enabled
[ 0.344371] Brought up 4 CPUs
[ 0.344373] Total of 4 processors activated (27145.08 BogoMIPS).
[ 0.345354] devtmpfs: initialized
[ 0.345354] EVM: security.selinux
[ 0.345354] EVM: security.SMACK64
[ 0.345354] EVM: security.capability
[ 0.345354] print_constraints: dummy:
[ 0.345354] RTC time: 10:28:42, date: 04/19/12
[ 0.345354] NET: Registered protocol family 16
[ 0.345354] ACPI: bus type pci registered
[ 0.345354] PCI: Using configuration type 1 for base access
[ 0.345354] Trying to unpack rootfs image as initramfs...
[ 0.348353] bio: create slab <bio-0> at 0
[ 0.348353] ACPI: Added _OSI(Module Device)
[ 0.348353] ACPI: Added _OSI(Processor Device)
[ 0.348353] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.348353] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.348353] ACPI: EC: Look up EC in DSDT
[ 0.348547] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.350447] ACPI: Interpreter enabled
[ 0.350450] ACPI: (supports S0 S5)
[ 0.350459] ACPI: Using IOAPIC for interrupt routing
[ 0.352692] ACPI: No dock devices found.
[ 0.352695] HEST: Table not found.
[ 0.352697] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.352738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.352813] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7] (ignored)
[ 0.352815] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff] (ignored)
[ 0.352816] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.352818] pci_root PNP0A03:00: host bridge window [mem
0xe0000000-0xffdfffff] (ignored)
[ 0.352852] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.353150] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.353567] pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
[ 0.353885] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.354120] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
[ 0.356449] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.372789] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.372900] pci 0000:00:03.0: reg 10: [io 0xd020-0xd03f]
[ 0.373432] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
[ 0.376229] pci 0000:00:04.0: reg 10: [io 0xd040-0xd05f]
[ 0.380229] pci 0000:00:04.0: reg 14: [mem 0xf0000000-0xf03fffff]
[ 0.382891] pci 0000:00:04.0: reg 18: [mem 0xf0400000-0xf0403fff pref]
[ 0.392444] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
[ 0.396234] pci 0000:00:06.0: reg 10: [mem 0xf0404000-0xf0404fff]
[ 0.411054] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
[ 0.412109] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03
[ 0.414940] pci 0000:00:0b.0: reg 10: [mem 0xf0405000-0xf0405fff]
[ 0.431155] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
[ 0.432285] pci 0000:00:0d.0: reg 10: [io 0xd060-0xd067]
[ 0.440252] pci 0000:00:0d.0: reg 18: [io 0xd070-0xd077]
[ 0.444431] pci 0000:00:0d.0: reg 20: [io 0xd080-0xd08f]
[ 0.448447] pci 0000:00:0d.0: reg 24: [mem 0xf0406000-0xf0407fff]
[ 0.453161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.454249] pci0000:00: Unable to request _OSC control (_OSC support
mask: 0x1e)
[ 0.460028] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.460448] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.460566] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.460681] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.461127] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.461127] vgaarb: loaded
[ 0.461127] vgaarb: bridge control possible 0000:00:02.0
[ 0.461127] i2c-core: driver [aat2870] using legacy suspend method
[ 0.461127] i2c-core: driver [aat2870] using legacy resume method
[ 0.461127] SCSI subsystem initialized
[ 0.461127] libata version 3.00 loaded.
[ 0.461127] usbcore: registered new interface driver usbfs
[ 0.461127] usbcore: registered new interface driver hub
[ 0.461127] usbcore: registered new device driver usb
[ 0.461127] PCI: Using ACPI for IRQ routing
[ 0.461127] PCI: pci_cache_line_size set to 64 bytes
[ 0.461127] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.461127] reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff
[ 0.461127] NetLabel: Initializing
[ 0.461127] NetLabel: domain hash size = 128
[ 0.461127] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.461127] NetLabel: unlabeled traffic allowed by default
[ 0.469329] AppArmor: AppArmor Filesystem Enabled
[ 0.469352] pnp: PnP ACPI init
[ 0.469365] ACPI: bus type pnp registered
[ 0.469424] pnp 00:00: [bus 00-ff]
[ 0.469425] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.469427] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.469428] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.469431] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.469432] pnp 00:00: [mem 0xe0000000-0xffdfffff window]
[ 0.469454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.469465] pnp 00:01: [io 0x0060]
[ 0.469466] pnp 00:01: [io 0x0064]
[ 0.469492] pnp 00:01: [irq 1]
[ 0.469507] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.469513] pnp 00:02: [io 0x0000-0x000f]
[ 0.469514] pnp 00:02: [io 0x0080-0x008f]
[ 0.469515] pnp 00:02: [io 0x00c0-0x00df]
[ 0.469516] pnp 00:02: [dma 4]
[ 0.469527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.469569] pnp 00:03: [irq 12]
[ 0.469584] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.469593] pnp 00:04: [io 0x0378-0x037f]
[ 0.469594] pnp 00:04: [io 0x0778-0x077f]
[ 0.469612] pnp 00:04: [irq 7]
[ 0.469626] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.469954] pnp: PnP ACPI: found 5 devices
[ 0.469956] ACPI: ACPI bus type pnp unregistered
[ 0.479843] Switching to clocksource acpi_pm
[ 0.479942] PCI: max bus depth: 0 pci_try_num: 1
[ 0.479960] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.479964] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.479989] NET: Registered protocol family 2
[ 0.479989] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.479989] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.479989] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.479989] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.479989] TCP reno registered
[ 0.479989] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479989] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479989] NET: Registered protocol family 1
[ 0.479989] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.479989] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.479989] pci 0000:00:02.0: Boot video device
[ 0.479989] pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.536224] pci 0000:00:06.0: PCI INT A disabled
[ 0.536281] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.536419] pci 0000:00:0b.0: PCI INT A disabled
[ 0.536438] PCI: CLS 64 bytes, default 64
[ 0.536440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.536442] Placing 64MB software IO TLB between ffff8800dbfea000 -
ffff8800dffea000
[ 0.536445] software IO TLB at phys 0xdbfea000 - 0xdffea000
[ 0.536534] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 0.537218] audit: initializing netlink socket (disabled)
[ 0.537228] type=2000 audit(1334831321.536:1): initialized
[ 0.559691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.569424] VFS: Disk quotas dquot_6.5.2
[ 0.569466] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.570011] fuse init (API version 7.17)
[ 0.570131] msgmni has been set to 7875
[ 0.571849] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.571976] io scheduler noop registered
[ 0.571979] io scheduler deadline registered
[ 0.572009] io scheduler cfq registered (default)
[ 0.572158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.572176] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.572258] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.572298] ACPI: AC Adapter [AC] (on-line)
[ 0.572375] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.572380] ACPI: Power Button [PWRF]
[ 0.572433] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 0.572437] ACPI: Sleep Button [SLPF]
[ 0.573452] ERST: Table is not found!
[ 0.573454] GHES: HEST is not enabled!
[ 0.573530] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 0.573727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.605871] Freeing initrd memory: 13832k freed
[ 1.248951] Linux agpgart interface v0.103
[ 1.254544] brd: module loaded
[ 1.256947] loop: module loaded
[ 1.257314] ahci 0000:00:0d.0: version 3.0
[ 1.257415] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.257633] ahci: SSS flag set, parallel bus scan disabled
[ 1.257942] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps
0x1 impl SATA mode
[ 1.257951] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.258674] scsi0 : ahci
[ 1.258767] ata1: SATA max UDMA/133 abar m8192@0xf0406000 port
0xf0406100 irq 21
[ 1.258844] ata_piix 0000:00:01.1: version 2.13
[ 1.259824] scsi1 : ata_piix
[ 1.260317] scsi2 : ata_piix
[ 1.260374] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000
irq 14
[ 1.260380] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008
irq 15
[ 1.260804] Fixed MDIO Bus: probed
[ 1.260817] tun: Universal TUN/TAP device driver, 1.6
[ 1.260818] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.261638] PPP generic driver version 2.4.2
[ 1.262079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.262122] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 1.262195] ehci_hcd 0000:00:0b.0: EHCI Host Controller
[ 1.262430] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned
bus number 1
[ 1.262761] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0405000
[ 1.272188] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.272644] hub 1-0:1.0: USB hub found
[ 1.272654] hub 1-0:1.0: 8 ports detected
[ 1.272827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.272898] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 1.272984] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.273269] ohci_hcd 0000:00:06.0: new USB bus registered, assigned
bus number 2
[ 1.273417] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000
[ 1.329002] hub 2-0:1.0: USB hub found
[ 1.329032] hub 2-0:1.0: 8 ports detected
[ 1.329525] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.329601] usbcore: registered new interface driver libusual
[ 1.329655] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M]
at 0x60,0x64 irq 1,12
[ 1.330733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.330748] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.331290] mousedev: PS/2 mouse device common for all mice
[ 1.332223] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.332913] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.333075] rtc0: alarms up to one day, 114 bytes nvram
[ 1.333222] device-mapper: uevent: version 1.0.3
[ 1.333528] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel@redhat.com
[ 1.333559] cpuidle: using governor ladder
[ 1.333563] cpuidle: using governor menu
[ 1.333567] EFI Variables Facility v0.08 2004-May-17
[ 1.333859] TCP cubic registered
[ 1.334011] NET: Registered protocol family 10
[ 1.334802] NET: Registered protocol family 17
[ 1.334835] Registering the dns_resolver key type
[ 1.335954] PM: Hibernation image not present or could not be loaded.
[ 1.335973] registered taskstats version 1
[ 1.360349] Magic number: 8:400:477
[ 1.360600] rtc_cmos rtc_cmos: setting system clock to 2012-04-19
10:28:43 UTC (1334831323)
[ 1.360808] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.360813] EDD information not available.
[ 1.417071] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.418236] ata3.00: configured for UDMA/33
[ 1.576294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.576442] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.576449] ata1.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.576637] ata1.00: configured for UDMA/133
[ 1.577145] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK
1.0 PQ: 0 ANSI: 5
[ 1.577596] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.577628] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58
GB/8.00 GiB)
[ 1.578323] sd 0:0:0:0: [sda] Write Protect is off
[ 1.578332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.578580] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.578765] scsi 2:0:0:0: CD-ROM VBOX CD-ROM
1.0 PQ: 0 ANSI: 5
[ 1.579836] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.579853] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.580258] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.580557] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.581366] sda: sda1 sda2 < sda5 >
[ 1.583094] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.584231] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.585305] Freeing unused kernel memory: 920k freed
[ 1.585472] Write protecting the kernel read-only data: 12288k
[ 1.593051] Freeing unused kernel memory: 1608k freed
[ 1.599031] Freeing unused kernel memory: 1196k freed
[ 1.637534] udevd[101]: starting version 175
[ 1.771768] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.874977] hrtimer: interrupt took 107977688 ns
[ 2.224241] usb 2-1: new full-speed USB device number 2 using ohci_hcd
[ 4.998829] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.015680] udevd[296]: starting version 175
[ 5.046608] Adding 4192252k swap on /dev/sda5. Priority:-1 extents:1
across:4192252k
[ 5.084794] piix4_smbus 0000:00:07.0: SMBus base address
uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 5.090614] lp: driver loaded but no devices found
[ 5.096851] type=1400 audit(1334831327.232:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient" pid=359
comm="apparmor_parser"
[ 5.097421] type=1400 audit(1334831327.232:3): apparmor="STATUS"
operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359
comm="apparmor_parser"
[ 5.097656] type=1400 audit(1334831327.232:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=359 comm="apparmor_parser"
[ 5.142805] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.148416] input: M-Audio Fast Track C400 as
/devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input3
[ 5.150294] input: Unspecified device as /devices/virtual/input/input4
[ 5.151404] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at
00000000f0000000 (size 0x400000)
[ 5.151407] vboxguest: Successfully loaded version 4.1.12 (interface
0x00010004)
[ 5.153200] generic-usb 0003:0763:2030.0001: input,hidraw0: USB HID
v1.10 Keyboard [M-Audio Fast Track C400] on usb-0000:00:0b.0-1/input5
[ 5.154104] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
[ 5.173055] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.176070] input: VirtualBox USB Tablet as
/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input6
[ 5.176363] generic-usb 0003:80EE:0021.0002: input,hidraw1: USB HID
v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 5.176376] usbcore: registered new interface driver usbhid
[ 5.176377] usbhid: USB HID core driver
[ 5.193484] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.197201] ppdev: user-space parallel port driver
[ 5.284929] snd-usb-audio: probe of 1-1:1.1 failed with error -5
[ 5.290898] snd-usb-audio: probe of 1-1:1.2 failed with error -5
[ 5.296928] snd-usb-audio: probe of 1-1:1.3 failed with error -5
[ 5.303749] usbcore: registered new interface driver snd-usb-audio
[ 5.568497] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 5.568501] vesafb: scrolling: redraw
[ 5.568505] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 5.568573] mtrr: your processor doesn't support write-combining
[ 5.568906] vesafb: framebuffer at 0xe0000000, mapped to
0xffffc90003f00000, using 1216k, total 1216k
[ 5.569237] Console: switching to colour frame buffer device 80x30
[ 5.573612] fb0: VESA VGA frame buffer device
[ 7.628873] init: failsafe main process (676) killed by TERM signal
[ 7.686842] type=1400 audit(1334831329.820:5): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/tcpdump" pid=856
comm="apparmor_parser"
[ 7.686955] type=1400 audit(1334831329.820:6): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient" pid=854
comm="apparmor_parser"
[ 7.687523] type=1400 audit(1334831329.820:7): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854
comm="apparmor_parser"
[ 7.687836] type=1400 audit(1334831329.820:8): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/connman/scripts/dhclient-script" pid=854
comm="apparmor_parser"
[ 7.881629] vboxsf: Successfully loaded version 4.1.12 (interface
0x00010004)
[ 15.552201] eth0: no IPv6 routers present
On 4/19/2012 7:09 AM, Grant Diffey wrote:
> On Thu, Apr 19, 2012 at 8:26 PM, Chris Cavey<chris-alsa@rauros.net> wrote:
>
>> Complete snippet from the log
>>
>> [ 374.104138] usbcore: deregistering interface driver snd-usb-audio
>> [ 374.875660] snd-usb-audio: probe of 1-1:1.1 failed with error -5
>> [ 374.881649] snd-usb-audio: probe of 1-1:1.2 failed with error -5
>> [ 374.887654] snd-usb-audio: probe of 1-1:1.3 failed with error -5
>> [ 374.895366] usbcore: registered new interface driver snd-usb-audio
>>
>> Sidenote - While I don't have a midi device to test with, it would
>> appear that the midi portion registers correctly and is accessible (at
>> least through amidi and aplaymidi)
>>
>> On 04/19/2012 04:53 AM, Clemens Ladisch wrote:
>>> Chris Cavey wrote:
>>>> snd-usb-audio: probe of 1-1:1.1 failed with error -5
>>>> snd-usb-audio: probe of 1-1:1.2 failed with error -5
>>>> snd-usb-audio: probe of 1-1:1.3 failed with error -5
>>> Are there no other messages immediately before this?
>>>
>>
> that looks like a snippet on unload can I have another 10 lines either side?
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
[-- Attachment #2: c400bootlog.txt --]
[-- Type: text/plain, Size: 27636 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff88000009fff0] 9fff0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfff0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfff0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfff0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dffea000-dfff0000
[ 0.000000] RAMDISK: 364ec000 - 3726e000
[ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 00000000dfff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000dfff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000dfff0480 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfff0200 00040
[ 0.000000] ACPI: APIC 00000000dfff0240 0006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000dfff02b0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfff0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048447
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 897072 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfff0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ffc0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030010
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4032084k/4718592k available (6566k kernel code, 524804k absent, 161704k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3385.153 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6770.30 BogoMIPS (lpj=13540612)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004023] Security Framework initialized
[ 0.004033] AppArmor: AppArmor initialized
[ 0.004035] Yama: becoming mindful.
[ 0.004588] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005520] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005792] Mount-cache hash table entries: 256
[ 0.005903] Initializing cgroup subsys cpuacct
[ 0.005908] Initializing cgroup subsys memory
[ 0.005913] Initializing cgroup subsys devices
[ 0.005916] Initializing cgroup subsys freezer
[ 0.005918] Initializing cgroup subsys blkio
[ 0.005922] Initializing cgroup subsys perf_event
[ 0.006124] CPU: Physical Processor ID: 0
[ 0.006127] CPU: Processor Core ID: 0
[ 0.006143] mce: CPU supports 0 MCE banks
[ 0.024772] ACPI: Core revision 20110623
[ 0.025296] ftrace: allocating 27049 entries in 107 pages
[ 0.036357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076499] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[ 0.080004] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.080004] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.080004] Booting Node 0, Processors #1
[ 0.080004] smpboot cpu 1: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.168009] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.168009] Measured 195227 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.168009] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.168030] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.168227] #2
[ 0.168228] smpboot cpu 2: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.256324] NMI watchdog disabled (cpu2): hardware events not enabled
[ 0.256528] #3 Ok.
[ 0.256529] smpboot cpu 3: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.344331] NMI watchdog disabled (cpu3): hardware events not enabled
[ 0.344371] Brought up 4 CPUs
[ 0.344373] Total of 4 processors activated (27145.08 BogoMIPS).
[ 0.345354] devtmpfs: initialized
[ 0.345354] EVM: security.selinux
[ 0.345354] EVM: security.SMACK64
[ 0.345354] EVM: security.capability
[ 0.345354] print_constraints: dummy:
[ 0.345354] RTC time: 10:28:42, date: 04/19/12
[ 0.345354] NET: Registered protocol family 16
[ 0.345354] ACPI: bus type pci registered
[ 0.345354] PCI: Using configuration type 1 for base access
[ 0.345354] Trying to unpack rootfs image as initramfs...
[ 0.348353] bio: create slab <bio-0> at 0
[ 0.348353] ACPI: Added _OSI(Module Device)
[ 0.348353] ACPI: Added _OSI(Processor Device)
[ 0.348353] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.348353] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.348353] ACPI: EC: Look up EC in DSDT
[ 0.348547] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.350447] ACPI: Interpreter enabled
[ 0.350450] ACPI: (supports S0 S5)
[ 0.350459] ACPI: Using IOAPIC for interrupt routing
[ 0.352692] ACPI: No dock devices found.
[ 0.352695] HEST: Table not found.
[ 0.352697] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.352738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.352813] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.352815] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.352816] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.352818] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xffdfffff] (ignored)
[ 0.352852] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.353150] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.353567] pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
[ 0.353885] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.354120] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
[ 0.356449] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.372789] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.372900] pci 0000:00:03.0: reg 10: [io 0xd020-0xd03f]
[ 0.373432] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
[ 0.376229] pci 0000:00:04.0: reg 10: [io 0xd040-0xd05f]
[ 0.380229] pci 0000:00:04.0: reg 14: [mem 0xf0000000-0xf03fffff]
[ 0.382891] pci 0000:00:04.0: reg 18: [mem 0xf0400000-0xf0403fff pref]
[ 0.392444] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
[ 0.396234] pci 0000:00:06.0: reg 10: [mem 0xf0404000-0xf0404fff]
[ 0.411054] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
[ 0.412109] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03
[ 0.414940] pci 0000:00:0b.0: reg 10: [mem 0xf0405000-0xf0405fff]
[ 0.431155] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
[ 0.432285] pci 0000:00:0d.0: reg 10: [io 0xd060-0xd067]
[ 0.440252] pci 0000:00:0d.0: reg 18: [io 0xd070-0xd077]
[ 0.444431] pci 0000:00:0d.0: reg 20: [io 0xd080-0xd08f]
[ 0.448447] pci 0000:00:0d.0: reg 24: [mem 0xf0406000-0xf0407fff]
[ 0.453161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.454249] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.460028] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.460448] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.460566] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.460681] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.461127] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.461127] vgaarb: loaded
[ 0.461127] vgaarb: bridge control possible 0000:00:02.0
[ 0.461127] i2c-core: driver [aat2870] using legacy suspend method
[ 0.461127] i2c-core: driver [aat2870] using legacy resume method
[ 0.461127] SCSI subsystem initialized
[ 0.461127] libata version 3.00 loaded.
[ 0.461127] usbcore: registered new interface driver usbfs
[ 0.461127] usbcore: registered new interface driver hub
[ 0.461127] usbcore: registered new device driver usb
[ 0.461127] PCI: Using ACPI for IRQ routing
[ 0.461127] PCI: pci_cache_line_size set to 64 bytes
[ 0.461127] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.461127] reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff
[ 0.461127] NetLabel: Initializing
[ 0.461127] NetLabel: domain hash size = 128
[ 0.461127] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.461127] NetLabel: unlabeled traffic allowed by default
[ 0.469329] AppArmor: AppArmor Filesystem Enabled
[ 0.469352] pnp: PnP ACPI init
[ 0.469365] ACPI: bus type pnp registered
[ 0.469424] pnp 00:00: [bus 00-ff]
[ 0.469425] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.469427] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.469428] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.469431] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.469432] pnp 00:00: [mem 0xe0000000-0xffdfffff window]
[ 0.469454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.469465] pnp 00:01: [io 0x0060]
[ 0.469466] pnp 00:01: [io 0x0064]
[ 0.469492] pnp 00:01: [irq 1]
[ 0.469507] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.469513] pnp 00:02: [io 0x0000-0x000f]
[ 0.469514] pnp 00:02: [io 0x0080-0x008f]
[ 0.469515] pnp 00:02: [io 0x00c0-0x00df]
[ 0.469516] pnp 00:02: [dma 4]
[ 0.469527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.469569] pnp 00:03: [irq 12]
[ 0.469584] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.469593] pnp 00:04: [io 0x0378-0x037f]
[ 0.469594] pnp 00:04: [io 0x0778-0x077f]
[ 0.469612] pnp 00:04: [irq 7]
[ 0.469626] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.469954] pnp: PnP ACPI: found 5 devices
[ 0.469956] ACPI: ACPI bus type pnp unregistered
[ 0.479843] Switching to clocksource acpi_pm
[ 0.479942] PCI: max bus depth: 0 pci_try_num: 1
[ 0.479960] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.479964] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.479989] NET: Registered protocol family 2
[ 0.479989] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.479989] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.479989] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.479989] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.479989] TCP reno registered
[ 0.479989] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479989] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479989] NET: Registered protocol family 1
[ 0.479989] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.479989] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.479989] pci 0000:00:02.0: Boot video device
[ 0.479989] pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.536224] pci 0000:00:06.0: PCI INT A disabled
[ 0.536281] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.536419] pci 0000:00:0b.0: PCI INT A disabled
[ 0.536438] PCI: CLS 64 bytes, default 64
[ 0.536440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.536442] Placing 64MB software IO TLB between ffff8800dbfea000 - ffff8800dffea000
[ 0.536445] software IO TLB at phys 0xdbfea000 - 0xdffea000
[ 0.536534] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.537218] audit: initializing netlink socket (disabled)
[ 0.537228] type=2000 audit(1334831321.536:1): initialized
[ 0.559691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.569424] VFS: Disk quotas dquot_6.5.2
[ 0.569466] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.570011] fuse init (API version 7.17)
[ 0.570131] msgmni has been set to 7875
[ 0.571849] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.571976] io scheduler noop registered
[ 0.571979] io scheduler deadline registered
[ 0.572009] io scheduler cfq registered (default)
[ 0.572158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.572176] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.572258] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.572298] ACPI: AC Adapter [AC] (on-line)
[ 0.572375] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.572380] ACPI: Power Button [PWRF]
[ 0.572433] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 0.572437] ACPI: Sleep Button [SLPF]
[ 0.573452] ERST: Table is not found!
[ 0.573454] GHES: HEST is not enabled!
[ 0.573530] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.573727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.605871] Freeing initrd memory: 13832k freed
[ 1.248951] Linux agpgart interface v0.103
[ 1.254544] brd: module loaded
[ 1.256947] loop: module loaded
[ 1.257314] ahci 0000:00:0d.0: version 3.0
[ 1.257415] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.257633] ahci: SSS flag set, parallel bus scan disabled
[ 1.257942] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.257951] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.258674] scsi0 : ahci
[ 1.258767] ata1: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406100 irq 21
[ 1.258844] ata_piix 0000:00:01.1: version 2.13
[ 1.259824] scsi1 : ata_piix
[ 1.260317] scsi2 : ata_piix
[ 1.260374] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.260380] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.260804] Fixed MDIO Bus: probed
[ 1.260817] tun: Universal TUN/TAP device driver, 1.6
[ 1.260818] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.261638] PPP generic driver version 2.4.2
[ 1.262079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.262122] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.262195] ehci_hcd 0000:00:0b.0: EHCI Host Controller
[ 1.262430] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 1.262761] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0405000
[ 1.272188] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.272644] hub 1-0:1.0: USB hub found
[ 1.272654] hub 1-0:1.0: 8 ports detected
[ 1.272827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.272898] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.272984] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.273269] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 1.273417] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000
[ 1.329002] hub 2-0:1.0: USB hub found
[ 1.329032] hub 2-0:1.0: 8 ports detected
[ 1.329525] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.329601] usbcore: registered new interface driver libusual
[ 1.329655] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.330733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.330748] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.331290] mousedev: PS/2 mouse device common for all mice
[ 1.332223] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.332913] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.333075] rtc0: alarms up to one day, 114 bytes nvram
[ 1.333222] device-mapper: uevent: version 1.0.3
[ 1.333528] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.333559] cpuidle: using governor ladder
[ 1.333563] cpuidle: using governor menu
[ 1.333567] EFI Variables Facility v0.08 2004-May-17
[ 1.333859] TCP cubic registered
[ 1.334011] NET: Registered protocol family 10
[ 1.334802] NET: Registered protocol family 17
[ 1.334835] Registering the dns_resolver key type
[ 1.335954] PM: Hibernation image not present or could not be loaded.
[ 1.335973] registered taskstats version 1
[ 1.360349] Magic number: 8:400:477
[ 1.360600] rtc_cmos rtc_cmos: setting system clock to 2012-04-19 10:28:43 UTC (1334831323)
[ 1.360808] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.360813] EDD information not available.
[ 1.417071] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.418236] ata3.00: configured for UDMA/33
[ 1.576294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.576442] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.576449] ata1.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.576637] ata1.00: configured for UDMA/133
[ 1.577145] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.577596] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.577628] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
[ 1.578323] sd 0:0:0:0: [sda] Write Protect is off
[ 1.578332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.578580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.578765] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.579836] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.579853] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.580258] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.580557] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.581366] sda: sda1 sda2 < sda5 >
[ 1.583094] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.584231] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.585305] Freeing unused kernel memory: 920k freed
[ 1.585472] Write protecting the kernel read-only data: 12288k
[ 1.593051] Freeing unused kernel memory: 1608k freed
[ 1.599031] Freeing unused kernel memory: 1196k freed
[ 1.637534] udevd[101]: starting version 175
[ 1.771768] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.874977] hrtimer: interrupt took 107977688 ns
[ 2.224241] usb 2-1: new full-speed USB device number 2 using ohci_hcd
[ 4.998829] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.015680] udevd[296]: starting version 175
[ 5.046608] Adding 4192252k swap on /dev/sda5. Priority:-1 extents:1 across:4192252k
[ 5.084794] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 5.090614] lp: driver loaded but no devices found
[ 5.096851] type=1400 audit(1334831327.232:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=359 comm="apparmor_parser"
[ 5.097421] type=1400 audit(1334831327.232:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 comm="apparmor_parser"
[ 5.097656] type=1400 audit(1334831327.232:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
[ 5.142805] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.148416] input: M-Audio Fast Track C400 as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input3
[ 5.150294] input: Unspecified device as /devices/virtual/input/input4
[ 5.151404] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at 00000000f0000000 (size 0x400000)
[ 5.151407] vboxguest: Successfully loaded version 4.1.12 (interface 0x00010004)
[ 5.153200] generic-usb 0003:0763:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [M-Audio Fast Track C400] on usb-0000:00:0b.0-1/input5
[ 5.154104] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 5.173055] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.176070] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input6
[ 5.176363] generic-usb 0003:80EE:0021.0002: input,hidraw1: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 5.176376] usbcore: registered new interface driver usbhid
[ 5.176377] usbhid: USB HID core driver
[ 5.193484] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.197201] ppdev: user-space parallel port driver
[ 5.284929] snd-usb-audio: probe of 1-1:1.1 failed with error -5
[ 5.290898] snd-usb-audio: probe of 1-1:1.2 failed with error -5
[ 5.296928] snd-usb-audio: probe of 1-1:1.3 failed with error -5
[ 5.303749] usbcore: registered new interface driver snd-usb-audio
[ 5.568497] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 5.568501] vesafb: scrolling: redraw
[ 5.568505] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 5.568573] mtrr: your processor doesn't support write-combining
[ 5.568906] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90003f00000, using 1216k, total 1216k
[ 5.569237] Console: switching to colour frame buffer device 80x30
[ 5.573612] fb0: VESA VGA frame buffer device
[ 7.628873] init: failsafe main process (676) killed by TERM signal
[ 7.686842] type=1400 audit(1334831329.820:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=856 comm="apparmor_parser"
[ 7.686955] type=1400 audit(1334831329.820:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=854 comm="apparmor_parser"
[ 7.687523] type=1400 audit(1334831329.820:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854 comm="apparmor_parser"
[ 7.687836] type=1400 audit(1334831329.820:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=854 comm="apparmor_parser"
[ 7.881629] vboxsf: Successfully loaded version 4.1.12 (interface 0x00010004)
[ 15.552201] eth0: no IPv6 routers present
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
[not found] ` <CACckToXHxm0y28ir+HGjE+Wug9PusHdrOeJpb3zQAFgQLjdP5w@mail.gmail.com>
@ 2012-04-19 19:47 ` Chris Cavey
0 siblings, 0 replies; 30+ messages in thread
From: Chris Cavey @ 2012-04-19 19:47 UTC (permalink / raw)
To: alsa-devel
Here we go - disconnect, reconnect, wait, disconnect, reconnect
[ 81.626968] usb 1-1: USB disconnect, device number 2
[ 96.644352] usb 1-1: new high-speed USB device number 3 using ehci_hcd
[ 96.854092] snd-usb-audio: probe of 1-1:1.1 failed with error -5
[ 96.860196] snd-usb-audio: probe of 1-1:1.2 failed with error -5
[ 96.869071] snd-usb-audio: probe of 1-1:1.3 failed with error -5
[ 96.886969] input: M-Audio Fast Track C400 as
/devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input7
[ 96.887558] generic-usb 0003:0763:2030.0003: input,hidraw0: USB HID
v1.10 Keyboard [M-Audio Fast Track C400] on usb-0000:00:0b.0-1/input5
[ 132.340302] usb 1-1: USB disconnect, device number 3
[ 140.444314] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[ 140.665648] snd-usb-audio: probe of 1-1:1.1 failed with error -5
[ 140.671506] snd-usb-audio: probe of 1-1:1.2 failed with error -5
[ 140.680480] snd-usb-audio: probe of 1-1:1.3 failed with error -5
[ 140.695583] input: M-Audio Fast Track C400 as
/devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input8
[ 140.696324] generic-usb 0003:0763:2030.0004: input,hidraw0: USB HID
v1.10 Keyboard [M-Audio Fast Track C400] on usb-0000:00:0b.0-1/input5
On 04/19/2012 07:20 AM, Grant Diffey wrote:
> oh... turn the interface off and on and give us the last 10 lines.
>
> On Thu, Apr 19, 2012 at 9:19 PM, Chris Cavey <chris-alsa@rauros.net
> <mailto:chris-alsa@rauros.net>> wrote:
>
> entire log
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.2.0-23-generic (buildd@crested)
> (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP
> Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
> [ 0.000000] Command line:
> BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic
> root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
> (usable)
> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
> (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
> (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000
> (usable)
> [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000
> (ACPI data)
> [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000
> (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000
> (usable)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.5 present.
> [ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox
> 12/01/2006
> [ 0.000000] e820 update range: 0000000000000000 -
> 0000000000010000 (usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 -
> 0000000000100000 (usable)
> [ 0.000000] No AGP bridge found
> [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR variable ranges disabled:
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> [ 0.000000] CPU MTRRs all blank - virtualized system.
> [ 0.000000] last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [ffff88000009fff0] 9fff0
> [ 0.000000] initial memory mapped : 0 - 20000000
> [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000
> size 20480
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfff0000
> [ 0.000000] 0000000000 - 00dfe00000 page 2M
> [ 0.000000] 00dfe00000 - 00dfff0000 page 4k
> [ 0.000000] kernel direct mapping tables up to dfff0000 @
> 1fffa000-20000000
> [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
> [ 0.000000] 0100000000 - 0120000000 page 2M
> [ 0.000000] kernel direct mapping tables up to 120000000 @
> dffea000-dfff0000
> [ 0.000000] RAMDISK: 364ec000 - 3726e000
> [ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
> [ 0.000000] ACPI: XSDT 00000000dfff0030 0003C (v01 VBOX
> VBOXXSDT 00000001 ASL 00000061)
> [ 0.000000] ACPI: FACP 00000000dfff00f0 000F4 (v04 VBOX
> VBOXFACP 00000001 ASL 00000061)
> [ 0.000000] ACPI: DSDT 00000000dfff0480 01B96 (v01 VBOX
> VBOXBIOS 00000002 INTL 20100528)
> [ 0.000000] ACPI: FACS 00000000dfff0200 00040
> [ 0.000000] ACPI: APIC 00000000dfff0240 0006C (v02 VBOX
> VBOXAPIC 00000001 ASL 00000061)
> [ 0.000000] ACPI: SSDT 00000000dfff02b0 001CC (v01 VBOX
> VBOXCPUT 00000002 INTL 20100528)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-0000000120000000
> [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
> [ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
> [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD ->
> [ffff88011b600000-ffff88011f5fffff] on node 0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00120000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x000dfff0
> [ 0.000000] 0: 0x00100000 -> 0x00120000
> [ 0.000000] On node 0 totalpages: 1048447
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 5 pages reserved
> [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 16320 pages used for memmap
> [ 0.000000] DMA32 zone: 897072 pages, LIFO batch:31
> [ 0.000000] Normal zone: 2048 pages used for memmap
> [ 0.000000] Normal zone: 129024 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address
> 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
> dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
> high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
> 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000dfff0000 -
> 00000000e0000000
> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
> 00000000fffc0000
> [ 0.000000] PM: Registered nosave memory: 00000000fffc0000 -
> 0000000100000000
> [ 0.000000] Allocating PCI resources starting at e0000000 (gap:
> e0000000:1ffc0000)
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256
> nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000
> s83072 r8192 d23424 u524288
> [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping
> on. Total pages: 1030010
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic
> root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA
> - bailing!
> [ 0.000000] Memory: 4032084k/4718592k available (6566k kernel
> code, 524804k absent, 161704k reserved, 6637k data, 920k init)
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3,
> MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] NR_IRQS:16640 nr_irqs:712 16
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 33554432 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you
> don't want memory cgroups
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 3385.153 MHz processor.
> [ 0.004003] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 6770.30 BogoMIPS (lpj=13540612)
> [ 0.004007] pid_max: default: 32768 minimum: 301
> [ 0.004023] Security Framework initialized
> [ 0.004033] AppArmor: AppArmor initialized
> [ 0.004035] Yama: becoming mindful.
> [ 0.004588] Dentry cache hash table entries: 524288 (order: 10,
> 4194304 bytes)
> [ 0.005520] Inode-cache hash table entries: 262144 (order: 9,
> 2097152 bytes)
> [ 0.005792] Mount-cache hash table entries: 256
> [ 0.005903] Initializing cgroup subsys cpuacct
> [ 0.005908] Initializing cgroup subsys memory
> [ 0.005913] Initializing cgroup subsys devices
> [ 0.005916] Initializing cgroup subsys freezer
> [ 0.005918] Initializing cgroup subsys blkio
> [ 0.005922] Initializing cgroup subsys perf_event
> [ 0.006124] CPU: Physical Processor ID: 0
> [ 0.006127] CPU: Processor Core ID: 0
> [ 0.006143] mce: CPU supports 0 MCE banks
> [ 0.024772] ACPI: Core revision 20110623
> [ 0.025296] ftrace: allocating 27049 entries in 107 pages
> [ 0.036357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.076499] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
> stepping 07
> [ 0.080004] Performance Events: unsupported p6 CPU model 42 no
> PMU driver, software events only.
> [ 0.080004] NMI watchdog disabled (cpu0): hardware events not
> enabled
> [ 0.080004] Booting Node 0, Processors #1
> [ 0.080004] smpboot cpu 1: start_ip = 9a000
> [ 0.008000] mce: CPU supports 0 MCE banks
> [ 0.168009] TSC synchronization [CPU#0 -> CPU#1]:
> [ 0.168009] Measured 195227 cycles TSC warp between CPUs,
> turning off TSC clock.
> [ 0.168009] Marking TSC unstable due to check_tsc_sync_source
> failed
> [ 0.168030] NMI watchdog disabled (cpu1): hardware events not
> enabled
> [ 0.168227] #2
> [ 0.168228] smpboot cpu 2: start_ip = 9a000
> [ 0.008000] mce: CPU supports 0 MCE banks
> [ 0.256324] NMI watchdog disabled (cpu2): hardware events not
> enabled
> [ 0.256528] #3 Ok.
> [ 0.256529] smpboot cpu 3: start_ip = 9a000
> [ 0.008000] mce: CPU supports 0 MCE banks
> [ 0.344331] NMI watchdog disabled (cpu3): hardware events not
> enabled
> [ 0.344371] Brought up 4 CPUs
> [ 0.344373] Total of 4 processors activated (27145.08 BogoMIPS).
> [ 0.345354] devtmpfs: initialized
> [ 0.345354] EVM: security.selinux
> [ 0.345354] EVM: security.SMACK64
> [ 0.345354] EVM: security.capability
> [ 0.345354] print_constraints: dummy:
> [ 0.345354] RTC time: 10:28:42, date: 04/19/12
> [ 0.345354] NET: Registered protocol family 16
> [ 0.345354] ACPI: bus type pci registered
> [ 0.345354] PCI: Using configuration type 1 for base access
> [ 0.345354] Trying to unpack rootfs image as initramfs...
> [ 0.348353] bio: create slab <bio-0> at 0
> [ 0.348353] ACPI: Added _OSI(Module Device)
> [ 0.348353] ACPI: Added _OSI(Processor Device)
> [ 0.348353] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.348353] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.348353] ACPI: EC: Look up EC in DSDT
> [ 0.348547] ACPI: Executed 1 blocks of module-level executable
> AML code
> [ 0.350447] ACPI: Interpreter enabled
> [ 0.350450] ACPI: (supports S0 S5)
> [ 0.350459] ACPI: Using IOAPIC for interrupt routing
> [ 0.352692] ACPI: No dock devices found.
> [ 0.352695] HEST: Table not found.
> [ 0.352697] PCI: Ignoring host bridge windows from ACPI; if
> necessary, use "pci=use_crs" and report a bug
> [ 0.352738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.352813] pci_root PNP0A03:00: host bridge window [io
> 0x0000-0x0cf7] (ignored)
> [ 0.352815] pci_root PNP0A03:00: host bridge window [io
> 0x0d00-0xffff] (ignored)
> [ 0.352816] pci_root PNP0A03:00: host bridge window [mem
> 0x000a0000-0x000bffff] (ignored)
> [ 0.352818] pci_root PNP0A03:00: host bridge window [mem
> 0xe0000000-0xffdfffff] (ignored)
> [ 0.352852] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
> [ 0.353150] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
> [ 0.353567] pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
> [ 0.353885] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
> [ 0.354120] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
> [ 0.356449] pci 0000:00:02.0: reg 10: [mem
> 0xe0000000-0xe0ffffff pref]
> [ 0.372789] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
> [ 0.372900] pci 0000:00:03.0: reg 10: [io 0xd020-0xd03f]
> [ 0.373432] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
> [ 0.376229] pci 0000:00:04.0: reg 10: [io 0xd040-0xd05f]
> [ 0.380229] pci 0000:00:04.0: reg 14: [mem 0xf0000000-0xf03fffff]
> [ 0.382891] pci 0000:00:04.0: reg 18: [mem
> 0xf0400000-0xf0403fff pref]
> [ 0.392444] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
> [ 0.396234] pci 0000:00:06.0: reg 10: [mem 0xf0404000-0xf0404fff]
> [ 0.411054] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
> [ 0.412109] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03
> [ 0.414940] pci 0000:00:0b.0: reg 10: [mem 0xf0405000-0xf0405fff]
> [ 0.431155] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
> [ 0.432285] pci 0000:00:0d.0: reg 10: [io 0xd060-0xd067]
> [ 0.440252] pci 0000:00:0d.0: reg 18: [io 0xd070-0xd077]
> [ 0.444431] pci 0000:00:0d.0: reg 20: [io 0xd080-0xd08f]
> [ 0.448447] pci 0000:00:0d.0: reg 24: [mem 0xf0406000-0xf0407fff]
> [ 0.453161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.454249] pci0000:00: Unable to request _OSC control (_OSC
> support mask: 0x1e)
> [ 0.460028] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
> [ 0.460448] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
> [ 0.460566] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
> [ 0.460681] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
> [ 0.461127] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.461127] vgaarb: loaded
> [ 0.461127] vgaarb: bridge control possible 0000:00:02.0
> [ 0.461127] i2c-core: driver [aat2870] using legacy suspend method
> [ 0.461127] i2c-core: driver [aat2870] using legacy resume method
> [ 0.461127] SCSI subsystem initialized
> [ 0.461127] libata version 3.00 loaded.
> [ 0.461127] usbcore: registered new interface driver usbfs
> [ 0.461127] usbcore: registered new interface driver hub
> [ 0.461127] usbcore: registered new device driver usb
> [ 0.461127] PCI: Using ACPI for IRQ routing
> [ 0.461127] PCI: pci_cache_line_size set to 64 bytes
> [ 0.461127] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
> [ 0.461127] reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff
> [ 0.461127] NetLabel: Initializing
> [ 0.461127] NetLabel: domain hash size = 128
> [ 0.461127] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.461127] NetLabel: unlabeled traffic allowed by default
> [ 0.469329] AppArmor: AppArmor Filesystem Enabled
> [ 0.469352] pnp: PnP ACPI init
> [ 0.469365] ACPI: bus type pnp registered
> [ 0.469424] pnp 00:00: [bus 00-ff]
> [ 0.469425] pnp 00:00: [io 0x0cf8-0x0cff]
> [ 0.469427] pnp 00:00: [io 0x0000-0x0cf7 window]
> [ 0.469428] pnp 00:00: [io 0x0d00-0xffff window]
> [ 0.469431] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [ 0.469432] pnp 00:00: [mem 0xe0000000-0xffdfffff window]
> [ 0.469454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03
> (active)
> [ 0.469465] pnp 00:01: [io 0x0060]
> [ 0.469466] pnp 00:01: [io 0x0064]
> [ 0.469492] pnp 00:01: [irq 1]
> [ 0.469507] pnp 00:01: Plug and Play ACPI device, IDs PNP0303
> (active)
> [ 0.469513] pnp 00:02: [io 0x0000-0x000f]
> [ 0.469514] pnp 00:02: [io 0x0080-0x008f]
> [ 0.469515] pnp 00:02: [io 0x00c0-0x00df]
> [ 0.469516] pnp 00:02: [dma 4]
> [ 0.469527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200
> (active)
> [ 0.469569] pnp 00:03: [irq 12]
> [ 0.469584] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03
> (active)
> [ 0.469593] pnp 00:04: [io 0x0378-0x037f]
> [ 0.469594] pnp 00:04: [io 0x0778-0x077f]
> [ 0.469612] pnp 00:04: [irq 7]
> [ 0.469626] pnp 00:04: Plug and Play ACPI device, IDs PNP0400
> (active)
> [ 0.469954] pnp: PnP ACPI: found 5 devices
> [ 0.469956] ACPI: ACPI bus type pnp unregistered
> [ 0.479843] Switching to clocksource acpi_pm
> [ 0.479942] PCI: max bus depth: 0 pci_try_num: 1
> [ 0.479960] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
> [ 0.479964] pci_bus 0000:00: resource 1 [mem
> 0x00000000-0xfffffffff]
> [ 0.479989] NET: Registered protocol family 2
> [ 0.479989] IP route cache hash table entries: 131072 (order:
> 8, 1048576 bytes)
> [ 0.479989] TCP established hash table entries: 524288 (order:
> 11, 8388608 bytes)
> [ 0.479989] TCP bind hash table entries: 65536 (order: 8,
> 1048576 bytes)
> [ 0.479989] TCP: Hash tables configured (established 524288
> bind 65536)
> [ 0.479989] TCP reno registered
> [ 0.479989] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> [ 0.479989] UDP-Lite hash table entries: 2048 (order: 4, 65536
> bytes)
> [ 0.479989] NET: Registered protocol family 1
> [ 0.479989] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> [ 0.479989] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> [ 0.479989] pci 0000:00:02.0: Boot video device
> [ 0.479989] pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low)
> -> IRQ 22
> [ 0.536224] pci 0000:00:06.0: PCI INT A disabled
> [ 0.536281] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low)
> -> IRQ 19
> [ 0.536419] pci 0000:00:0b.0: PCI INT A disabled
> [ 0.536438] PCI: CLS 64 bytes, default 64
> [ 0.536440] PCI-DMA: Using software bounce buffering for IO
> (SWIOTLB)
> [ 0.536442] Placing 64MB software IO TLB between
> ffff8800dbfea000 - ffff8800dffea000
> [ 0.536445] software IO TLB at phys 0xdbfea000 - 0xdffea000
> [ 0.536534] platform rtc_cmos: registered platform RTC device
> (no PNP device found)
> [ 0.537218] audit: initializing netlink socket (disabled)
> [ 0.537228] type=2000 audit(1334831321.536:1): initialized
> [ 0.559691] HugeTLB registered 2 MB page size, pre-allocated 0
> pages
> [ 0.569424] VFS: Disk quotas dquot_6.5.2
> [ 0.569466] Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> [ 0.570011] fuse init (API version 7.17)
> [ 0.570131] msgmni has been set to 7875
> [ 0.571849] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 253)
> [ 0.571976] io scheduler noop registered
> [ 0.571979] io scheduler deadline registered
> [ 0.572009] io scheduler cfq registered (default)
> [ 0.572158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.572176] pciehp: PCI Express Hot Plug Controller Driver
> version: 0.4
> [ 0.572258] ACPI: Deprecated procfs I/F for AC is loaded,
> please retry with CONFIG_ACPI_PROCFS_POWER cleared
> [ 0.572298] ACPI: AC Adapter [AC] (on-line)
> [ 0.572375] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 0.572380] ACPI: Power Button [PWRF]
> [ 0.572433] input: Sleep Button as
> /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
> [ 0.572437] ACPI: Sleep Button [SLPF]
> [ 0.573452] ERST: Table is not found!
> [ 0.573454] GHES: HEST is not enabled!
> [ 0.573530] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19
> (level, low) -> IRQ 19
> [ 0.573727] Serial: 8250/16550 driver, 32 ports, IRQ sharing
> enabled
> [ 0.605871] Freeing initrd memory: 13832k freed
> [ 1.248951] Linux agpgart interface v0.103
> [ 1.254544] brd: module loaded
> [ 1.256947] loop: module loaded
> [ 1.257314] ahci 0000:00:0d.0: version 3.0
> [ 1.257415] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low)
> -> IRQ 21
> [ 1.257633] ahci: SSS flag set, parallel bus scan disabled
> [ 1.257942] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports
> 3 Gbps 0x1 impl SATA mode
> [ 1.257951] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
> [ 1.258674] scsi0 : ahci
> [ 1.258767] ata1: SATA max UDMA/133 abar m8192@0xf0406000 port
> 0xf0406100 irq 21
> [ 1.258844] ata_piix 0000:00:01.1: version 2.13
> [ 1.259824] scsi1 : ata_piix
> [ 1.260317] scsi2 : ata_piix
> [ 1.260374] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma
> 0xd000 irq 14
> [ 1.260380] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma
> 0xd008 irq 15
> [ 1.260804] Fixed MDIO Bus: probed
> [ 1.260817] tun: Universal TUN/TAP device driver, 1.6
> [ 1.260818] tun: (C) 1999-2004 Max Krasnyansky
> <maxk@qualcomm.com <mailto:maxk@qualcomm.com>>
> [ 1.261638] PPP generic driver version 2.4.2
> [ 1.262079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 1.262122] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level,
> low) -> IRQ 19
> [ 1.262195] ehci_hcd 0000:00:0b.0: EHCI Host Controller
> [ 1.262430] ehci_hcd 0000:00:0b.0: new USB bus registered,
> assigned bus number 1
> [ 1.262761] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0405000
> [ 1.272188] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
> [ 1.272644] hub 1-0:1.0: USB hub found
> [ 1.272654] hub 1-0:1.0: 8 ports detected
> [ 1.272827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.272898] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level,
> low) -> IRQ 22
> [ 1.272984] ohci_hcd 0000:00:06.0: OHCI Host Controller
> [ 1.273269] ohci_hcd 0000:00:06.0: new USB bus registered,
> assigned bus number 2
> [ 1.273417] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000
> [ 1.329002] hub 2-0:1.0: USB hub found
> [ 1.329032] hub 2-0:1.0: 8 ports detected
> [ 1.329525] uhci_hcd: USB Universal Host Controller Interface
> driver
> [ 1.329601] usbcore: registered new interface driver libusual
> [ 1.329655] i8042: PNP: PS/2 Controller
> [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> [ 1.330733] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.330748] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.331290] mousedev: PS/2 mouse device common for all mice
> [ 1.332223] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input2
> [ 1.332913] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as
> rtc0
> [ 1.333075] rtc0: alarms up to one day, 114 bytes nvram
> [ 1.333222] device-mapper: uevent: version 1.0.3
> [ 1.333528] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
> initialised: dm-devel@redhat.com <mailto:dm-devel@redhat.com>
> [ 1.333559] cpuidle: using governor ladder
> [ 1.333563] cpuidle: using governor menu
> [ 1.333567] EFI Variables Facility v0.08 2004-May-17
> [ 1.333859] TCP cubic registered
> [ 1.334011] NET: Registered protocol family 10
> [ 1.334802] NET: Registered protocol family 17
> [ 1.334835] Registering the dns_resolver key type
> [ 1.335954] PM: Hibernation image not present or could not be
> loaded.
> [ 1.335973] registered taskstats version 1
> [ 1.360349] Magic number: 8:400:477
> [ 1.360600] rtc_cmos rtc_cmos: setting system clock to
> 2012-04-19 10:28:43 UTC (1334831323)
> [ 1.360808] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.360813] EDD information not available.
> [ 1.417071] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
> [ 1.418236] ata3.00: configured for UDMA/33
> [ 1.576294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.576442] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
> [ 1.576449] ata1.00: 16777216 sectors, multi 128: LBA48 NCQ
> (depth 31/32)
> [ 1.576637] ata1.00: configured for UDMA/133
> [ 1.577145] scsi 0:0:0:0: Direct-Access ATA VBOX
> HARDDISK 1.0 PQ: 0 ANSI: 5
> [ 1.577596] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.577628] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks:
> (8.58 GB/8.00 GiB)
> [ 1.578323] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.578332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.578580] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.578765] scsi 2:0:0:0: CD-ROM VBOX CD-ROM
> 1.0 PQ: 0 ANSI: 5
> [ 1.579836] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
> [ 1.579853] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.580258] sr 2:0:0:0: Attached scsi CD-ROM sr0
> [ 1.580557] sr 2:0:0:0: Attached scsi generic sg1 type 5
> [ 1.581366] sda: sda1 sda2 < sda5 >
> [ 1.583094] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.584231] usb 1-1: new high-speed USB device number 2 using
> ehci_hcd
> [ 1.585305] Freeing unused kernel memory: 920k freed
> [ 1.585472] Write protecting the kernel read-only data: 12288k
> [ 1.593051] Freeing unused kernel memory: 1608k freed
> [ 1.599031] Freeing unused kernel memory: 1196k freed
> [ 1.637534] udevd[101]: starting version 175
> [ 1.771768] EXT4-fs (sda1): mounted filesystem with ordered
> data mode. Opts: (null)
> [ 1.874977] hrtimer: interrupt took 107977688 ns
> [ 2.224241] usb 2-1: new full-speed USB device number 2 using
> ohci_hcd
> [ 4.998829] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 5.015680] udevd[296]: starting version 175
> [ 5.046608] Adding 4192252k swap on /dev/sda5. Priority:-1
> extents:1 across:4192252k
> [ 5.084794] piix4_smbus 0000:00:07.0: SMBus base address
> uninitialized - upgrade BIOS or use force_addr=0xaddr
> [ 5.090614] lp: driver loaded but no devices found
> [ 5.096851] type=1400 audit(1334831327.232:2):
> apparmor="STATUS" operation="profile_load" name="/sbin/dhclient"
> pid=359 comm="apparmor_parser"
> [ 5.097421] type=1400 audit(1334831327.232:3):
> apparmor="STATUS" operation="profile_load"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359
> comm="apparmor_parser"
> [ 5.097656] type=1400 audit(1334831327.232:4):
> apparmor="STATUS" operation="profile_load"
> name="/usr/lib/connman/scripts/dhclient-script" pid=359
> comm="apparmor_parser"
> [ 5.142805] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low)
> -> IRQ 20
> [ 5.148416] input: M-Audio Fast Track C400 as
> /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input3
> [ 5.150294] input: Unspecified device as
> /devices/virtual/input/input4
> [ 5.151404] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at
> 00000000f0000000 (size 0x400000)
> [ 5.151407] vboxguest: Successfully loaded version 4.1.12
> (interface 0x00010004)
> [ 5.153200] generic-usb 0003:0763:2030.0001: input,hidraw0: USB
> HID v1.10 Keyboard [M-Audio Fast Track C400] on
> usb-0000:00:0b.0-1/input5
> [ 5.154104] input: ImExPS/2 Generic Explorer Mouse as
> /devices/platform/i8042/serio1/input/input5
> [ 5.173055] parport_pc 00:04: reported by Plug and Play ACPI
> [ 5.176070] input: VirtualBox USB Tablet as
> /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input6
> [ 5.176363] generic-usb 0003:80EE:0021.0002: input,hidraw1: USB
> HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
> [ 5.176376] usbcore: registered new interface driver usbhid
> [ 5.176377] usbhid: USB HID core driver
> [ 5.193484] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
> [ 5.197201] ppdev: user-space parallel port driver
> [ 5.284929] snd-usb-audio: probe of 1-1:1.1 failed with error -5
> [ 5.290898] snd-usb-audio: probe of 1-1:1.2 failed with error -5
> [ 5.296928] snd-usb-audio: probe of 1-1:1.3 failed with error -5
> [ 5.303749] usbcore: registered new interface driver snd-usb-audio
> [ 5.568497] vesafb: mode is 640x480x32, linelength=2560, pages=0
> [ 5.568501] vesafb: scrolling: redraw
> [ 5.568505] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 5.568573] mtrr: your processor doesn't support write-combining
> [ 5.568906] vesafb: framebuffer at 0xe0000000, mapped to
> 0xffffc90003f00000, using 1216k, total 1216k
> [ 5.569237] Console: switching to colour frame buffer device 80x30
> [ 5.573612] fb0: VESA VGA frame buffer device
> [ 7.628873] init: failsafe main process (676) killed by TERM signal
> [ 7.686842] type=1400 audit(1334831329.820:5):
> apparmor="STATUS" operation="profile_load"
> name="/usr/sbin/tcpdump" pid=856 comm="apparmor_parser"
> [ 7.686955] type=1400 audit(1334831329.820:6):
> apparmor="STATUS" operation="profile_replace"
> name="/sbin/dhclient" pid=854 comm="apparmor_parser"
> [ 7.687523] type=1400 audit(1334831329.820:7):
> apparmor="STATUS" operation="profile_replace"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854
> comm="apparmor_parser"
> [ 7.687836] type=1400 audit(1334831329.820:8):
> apparmor="STATUS" operation="profile_replace"
> name="/usr/lib/connman/scripts/dhclient-script" pid=854
> comm="apparmor_parser"
> [ 7.881629] vboxsf: Successfully loaded version 4.1.12
> (interface 0x00010004)
> [ 15.552201] eth0: no IPv6 routers present
>
>
>
> On 4/19/2012 7:09 AM, Grant Diffey wrote:
>
> On Thu, Apr 19, 2012 at 8:26 PM, Chris
> Cavey<chris-alsa@rauros.net <mailto:chris-alsa@rauros.net>>
> wrote:
>
> Complete snippet from the log
>
> [ 374.104138] usbcore: deregistering interface driver
> snd-usb-audio
> [ 374.875660] snd-usb-audio: probe of 1-1:1.1 failed with
> error -5
> [ 374.881649] snd-usb-audio: probe of 1-1:1.2 failed with
> error -5
> [ 374.887654] snd-usb-audio: probe of 1-1:1.3 failed with
> error -5
> [ 374.895366] usbcore: registered new interface driver
> snd-usb-audio
>
> Sidenote - While I don't have a midi device to test with,
> it would
> appear that the midi portion registers correctly and is
> accessible (at
> least through amidi and aplaymidi)
>
> On 04/19/2012 04:53 AM, Clemens Ladisch wrote:
>
> Chris Cavey wrote:
>
> snd-usb-audio: probe of 1-1:1.1 failed with error -5
> snd-usb-audio: probe of 1-1:1.2 failed with error -5
> snd-usb-audio: probe of 1-1:1.3 failed with error -5
>
> Are there no other messages immediately before this?
>
>
> that looks like a snippet on unload can I have another 10
> lines either side?
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org <mailto:Alsa-devel@alsa-project.org>
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org <mailto:Alsa-devel@alsa-project.org>
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-19 8:53 ` Clemens Ladisch
2012-04-19 10:26 ` Chris Cavey
@ 2012-04-20 7:54 ` Daniel Mack
2012-04-21 1:29 ` Chris Cavey
1 sibling, 1 reply; 30+ messages in thread
From: Daniel Mack @ 2012-04-20 7:54 UTC (permalink / raw)
To: Clemens Ladisch; +Cc: Grant Diffey, chris-alsa, alsa-devel
On 04/19/2012 10:53 AM, Clemens Ladisch wrote:
> Chris Cavey wrote:
>> snd-usb-audio: probe of 1-1:1.1 failed with error -5
>> snd-usb-audio: probe of 1-1:1.2 failed with error -5
>> snd-usb-audio: probe of 1-1:1.3 failed with error -5
>
> Are there no other messages immediately before this?
>
> Daniel, are there places where the code aborts without
> print an error message?
Yes, there are in fact some. -5 means -EIO, and the module probe will
fail with this error code in case snd_usb_audio_probe() returns NULL.
Chris, can you trace this functions in sound/usb/card.c and see where it
bails?
Daniel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-20 7:54 ` Daniel Mack
@ 2012-04-21 1:29 ` Chris Cavey
2012-04-21 8:10 ` Felix Homann
0 siblings, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-04-21 1:29 UTC (permalink / raw)
To: alsa-devel
Having never done kernel module debugging I resorted to littering printk
everywhere. Crude but effective. I'll really need to look into setting
up kernel debug in VirtualBox...
The C400 appears to be UAC2 device.
The root cause of the failure occurs during snd_usb_mixer_controls()
Following down the rabbit hole,
parse_audio_unit() discovers a type, UAC_MIXER_UNIT and beings to parse
pins in parse_audio_mixer_unit()
A pin is found of type "7" which since this is UAC2 device, could be
UAC2_EFFECT_UNIT or UAC1_PROCESSING_UNIT
We arrive at the following case in check_input_term:
case UAC1_PROCESSING_UNIT:
case UAC1_EXTENSION_UNIT: {
struct uac_processing_unit_descriptor *d = p1;
if (d->bNrInPins) {
id = d->baSourceID[0];
break; /* continue to parse */
}
The break ultimately results (after find_audio_control_unit returns
NULL) in ENODEV which bubbles all the way back out to
snd_usb_audio_probe(), goto returns NULL, back out to usb_audio_probe()
which finally returns -EIO.
Being a little daring I replaced the break with "return 0;" - now the
card is detected but fails trying to probe sample rates.
I copied the FIXED_ENDPOINT quirk descriptor from the FTU and trying to
slam in workable values(channels = 2, ifnum = 2).
Viola! The card now completes probing and shows up as a device in aplay
-L/-l.
Except I can't get it to play anything (figure it would all be too good
to be true)
$ speaker-test -Dfront:C400
speaker-test 1.0.25
Playback device is front:C400
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Sample format not available for playback: Invalid argument
Setting of hwparams failed: Invalid argument
$ amixer contents
numid=1,iface=MIXER,name='PCM Clock Source'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Unit 129'
; Item #1 'Unit 130'
: values=0
On 04/20/2012 03:54 AM, Daniel Mack wrote:
> On 04/19/2012 10:53 AM, Clemens Ladisch wrote:
>> Chris Cavey wrote:
>>> snd-usb-audio: probe of 1-1:1.1 failed with error -5
>>> snd-usb-audio: probe of 1-1:1.2 failed with error -5
>>> snd-usb-audio: probe of 1-1:1.3 failed with error -5
>> Are there no other messages immediately before this?
>>
>> Daniel, are there places where the code aborts without
>> print an error message?
> Yes, there are in fact some. -5 means -EIO, and the module probe will
> fail with this error code in case snd_usb_audio_probe() returns NULL.
> Chris, can you trace this functions in sound/usb/card.c and see where it
> bails?
>
>
>
> Daniel
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-21 1:29 ` Chris Cavey
@ 2012-04-21 8:10 ` Felix Homann
2012-04-21 8:48 ` Felix Homann
2012-04-21 9:19 ` Grant Diffey
0 siblings, 2 replies; 30+ messages in thread
From: Felix Homann @ 2012-04-21 8:10 UTC (permalink / raw)
To: chris-alsa; +Cc: alsa-devel
2012/4/21 Chris Cavey <chris-alsa@rauros.net>:
> The C400 appears to be UAC2 device.
How do you come to this conclusion?
> I copied the FIXED_ENDPOINT quirk descriptor from the FTU and trying to
> slam in workable values
That's a good idea given that the C400 is said to use the same chip as the FTU.
>(channels = 2, ifnum = 2).
Why do you use channels=2. As fas as I can tell the device has 6
channels. Try that.
> Except I can't get it to play anything (figure it would all be too good
> to be true)
>
> $ speaker-test -Dfront:C400
> speaker-test 1.0.25
>
> Playback device is front:C400
> Stream parameters are 48000Hz, S16_LE, 1 channels
> Using 16 octaves of pink noise
> Sample format not available for playback: Invalid argument
> Setting of hwparams failed: Invalid argument
>
The device probably supports only S24_3LE audio. At least that's what
you tell Alsa with the FTU quirk. Try to play something through the
corresponding hw device or use Jack or convert some audio file to
S24_3LE and play through aplay etc...
> $ amixer contents
> numid=1,iface=MIXER,name='PCM Clock Source'
> ; type=ENUMERATED,access=rw------,values=1,items=2
> ; Item #0 'Unit 129'
> ; Item #1 'Unit 130'
> : values=0
>
That's good. Probably we won't need to implement a custom clock source
switch for this device.
Nevertheless, I'll try to come up with a quirk that might get the
mixer working. Might take a couple of days.
Regards,
Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-21 8:10 ` Felix Homann
@ 2012-04-21 8:48 ` Felix Homann
2012-04-21 9:19 ` Grant Diffey
1 sibling, 0 replies; 30+ messages in thread
From: Felix Homann @ 2012-04-21 8:48 UTC (permalink / raw)
To: chris-alsa; +Cc: alsa-devel
2012/4/21 Felix Homann <linuxaudio@showlabor.de>:
>>(channels = 2, ifnum = 2).
>
> Why do you use channels=2. As fas as I can tell the device has 6
> channels.
That should be: 6 playback channels and 4 capture channels.
--Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-21 8:10 ` Felix Homann
2012-04-21 8:48 ` Felix Homann
@ 2012-04-21 9:19 ` Grant Diffey
2012-04-21 16:07 ` Chris Cavey
2012-04-29 3:09 ` Chris Cavey
1 sibling, 2 replies; 30+ messages in thread
From: Grant Diffey @ 2012-04-21 9:19 UTC (permalink / raw)
To: Felix Homann; +Cc: alsa-devel, chris-alsa
> >(channels = 2, ifnum = 2).
>
> Why do you use channels=2. As fas as I can tell the device has 6
> channels. Try that.
>
>
> > Except I can't get it to play anything (figure it would all be too good
> > to be true)
> >
> > $ speaker-test -Dfront:C400
> > speaker-test 1.0.25
> >
> > Playback device is front:C400
> > Stream parameters are 48000Hz, S16_LE, 1 channels
> > Using 16 octaves of pink noise
> > Sample format not available for playback: Invalid argument
> > Setting of hwparams failed: Invalid argument
> >
>
> The device probably supports only S24_3LE audio. At least that's what
> you tell Alsa with the FTU quirk. Try to play something through the
> corresponding hw device or use Jack or convert some audio file to
> S24_3LE and play through aplay etc...
>
>
that's a good point
try speaker-test -D plughw:C400
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-21 9:19 ` Grant Diffey
@ 2012-04-21 16:07 ` Chris Cavey
2012-04-29 3:09 ` Chris Cavey
1 sibling, 0 replies; 30+ messages in thread
From: Chris Cavey @ 2012-04-21 16:07 UTC (permalink / raw)
To: alsa-devel
speaker-test plughw:C400 got me further but complains still
Setting of hwparams failed: Invalid argument
From the manual:
2 analog mono inputs, 1 stereo SPDIF gives a total 4 inputs
4 analog mono outputs, 1 stereo SPDIF gives a total 6 outputs
Does SPDIF factor into channels?
I noticed, the endpoint attributes are slightly different that the FTU.
Could this be an issue? I'm also guessing that the mixer lacking
channels is probably an issue. I wonder if the some the FTU mixer
"workarounds" may fit.
On 4/21/2012 5:19 AM, Grant Diffey wrote:
>>> (channels = 2, ifnum = 2).
>>
>> Why do you use channels=2. As fas as I can tell the device has 6
>> channels. Try that.
>>
>>
>>> Except I can't get it to play anything (figure it would all be too good
>>> to be true)
>>>
>>> $ speaker-test -Dfront:C400
>>> speaker-test 1.0.25
>>>
>>> Playback device is front:C400
>>> Stream parameters are 48000Hz, S16_LE, 1 channels
>>> Using 16 octaves of pink noise
>>> Sample format not available for playback: Invalid argument
>>> Setting of hwparams failed: Invalid argument
>>>
>>
>> The device probably supports only S24_3LE audio. At least that's what
>> you tell Alsa with the FTU quirk. Try to play something through the
>> corresponding hw device or use Jack or convert some audio file to
>> S24_3LE and play through aplay etc...
>>
>>
> that's a good point
>
> try speaker-test -D plughw:C400
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-21 9:19 ` Grant Diffey
2012-04-21 16:07 ` Chris Cavey
@ 2012-04-29 3:09 ` Chris Cavey
2012-04-29 6:51 ` Felix Homann
1 sibling, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-04-29 3:09 UTC (permalink / raw)
To: Grant Diffey; +Cc: alsa-devel, Felix Homann
I did some more digging on the mixer setup of the C400 using
usbmon+tcpdump+wireshark. I'm happy to provide binary captures if it helps.
I adjusted volume on each channel under and arrived at the following.
Best to consult the C400 manual for screenshots of the interface.
The values listed correspond to the wValue in the URB block. The wIndex
for all is 16385. Looks like two bytes for values.
Treat this as CSV in any editor and you'll see my table. Omitted numbers
are sequential based on the other numbers in the row. Out 1-6 are the
software returns, In 1-4 being the hardware inputs. The top row are the
6 outputs. For each output it would appears that the routed signal is
always manipulated in (stereo) pairs - ex. Adjusting volume on software
return 1 (Out 1) for Analog1/2 will adjust volume on 0x0100 AND 0x0101.
,A1-2 (1),A1-2 (2),A3-4 (3),A3-4 (4),SP (L),SP (R)
Out 1,0x0100,0x0101,,,,0x0105
Out 2,0x0106,0x0107,,,,0x010b
Out 3,0x010c,0x010d,,,,
Out 4,0x0112,0x0113,,,,0x0117
Out 5,0x0118,0x0119,,,,0x011d
Out 6,0x011e,0x011f,,,,0x0123
In 1,0x0124,0x0125,0x0126,0x0127,0x0128,0x0129
In 2,0x012a,0x12b,0x012c,0x012d,0x012e,0x012f
In 3,0x0130,0x0131,,,,0x0135
In 4,0x0136,0x0137,,,,0x013b
Also captured some sample rate adjustment values
wValue = 0x0100 (always)
wIndex = 33025
values in the data for the sample rates
0x00770100 => 96000
0x44ac0000 => 44100
0x80bb0000 => 48000
0x88580100 => 88200
On 4/21/2012 5:19 AM, Grant Diffey wrote:
>
> >(channels = 2, ifnum = 2).
>
> Why do you use channels=2. As fas as I can tell the device has 6
> channels. Try that.
>
>
> > Except I can't get it to play anything (figure it would all be
> too good
> > to be true)
> >
> > $ speaker-test -Dfront:C400
> > speaker-test 1.0.25
> >
> > Playback device is front:C400
> > Stream parameters are 48000Hz, S16_LE, 1 channels
> > Using 16 octaves of pink noise
> > Sample format not available for playback: Invalid argument
> > Setting of hwparams failed: Invalid argument
> >
>
> The device probably supports only S24_3LE audio. At least that's what
> you tell Alsa with the FTU quirk. Try to play something through the
> corresponding hw device or use Jack or convert some audio file to
> S24_3LE and play through aplay etc...
>
>
> that's a good point
>
> try speaker-test -D plughw:C400
>
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-29 3:09 ` Chris Cavey
@ 2012-04-29 6:51 ` Felix Homann
2012-04-29 13:30 ` Chris Cavey
0 siblings, 1 reply; 30+ messages in thread
From: Felix Homann @ 2012-04-29 6:51 UTC (permalink / raw)
To: chris-alsa; +Cc: Grant Diffey, alsa-devel
Hi Chris,
2012/4/29 Chris Cavey <chris-alsa@rauros.net>:
> I did some more digging on the mixer setup of the C400 using
> usbmon+tcpdump+wireshark. I'm happy to provide binary captures if it helps.
thanks.
> In 2,0x012a,0x12b,0x012c,0x012d,0x012e,0x012f
> In 3,0x0130,0x0131,,,,0x0135
> In 4,0x0136,0x0137,,,,0x013b
Ok, it seems the controls are organized differently ("flat") than on
the FTUs ("matrix").
> Also captured some sample rate adjustment values
>
> wValue = 0x0100 (always)
> wIndex = 33025
>
> values in the data for the sample rates
> 0x00770100 => 96000
> 0x44ac0000 => 44100
> 0x80bb0000 => 48000
> 0x88580100 => 88200
This seems pretty standard.
Could you please post some usbmon output since I need to know the unit
id and the value range of the controls as well. You can even shorten
those logs by just sending the output of 'grep Co some.log'. It should
look something like this:
ffff88007d9d70c0 3382435826 S Co:1:003:0 s 21 01 0201 0500 0002 2 = 92f3
ffff88007d9d70c0 3382436191 C Co:1:003:0 0 2 >
ffff88007d9d70c0 3382441208 S Co:1:003:0 s 21 01 0101 0500 0002 2 = 92f3
ffff88007d9d70c0 3382441565 C Co:1:003:0 0 2 >
ffff88007d9d70c0 3383137494 S Co:1:003:0 s 21 01 0201 0500 0002 2 = fefc
ffff88007d9d70c0 3383137823 C Co:1:003:0 0 2 >
ffff88007d9d70c0 3383141778 S Co:1:003:0 s 21 01 0101 0500 0002 2 = fefc
ffff88007d9d70c0 3383142070 C Co:1:003:0 0 2 >
(This is changing the volume for Monitor1/2, Input 1 on the FTU).
I don't need a log for every control just the first and last of a kind
would suffice.
Regards,
Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-29 6:51 ` Felix Homann
@ 2012-04-29 13:30 ` Chris Cavey
2012-05-02 10:05 ` Felix Homann
0 siblings, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-04-29 13:30 UTC (permalink / raw)
To: Felix Homann; +Cc: Grant Diffey, alsa-devel
Performing these operations on other channels results in the same values
just different wValues per channel as a I listed in the previous message
toggling mute on software return 1 (centered), analog out 1/2
ffff8804046af840 3934536050 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 0080
ffff8804046af840 3934536518 C Co:2:003:0 0 2 >
ffff8804046af840 3934538968 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 0080
ffff8804046af840 3934539372 C Co:2:003:0 0 2 >
ffff8804046af840 3935031971 S Co:2:003:0 s 21 01 0100 4001 0002 2 = fefc
ffff8804046af840 3935032367 C Co:2:003:0 0 2 >
ffff8804046af840 3935034996 S Co:2:003:0 s 21 01 0101 4001 0002 2 = fefc
ffff8804046af840 3935035368 C Co:2:003:0 0 2 >
toggling mute on software return 1 (hard left pan), analog out 1/2
ffff88034f6af240 4014847999 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 0080
ffff88034f6af240 4014848445 C Co:2:003:0 0 2 >
ffff8803e08b8840 4015764061 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 0000
ffff8803e08b8840 4015764455 C Co:2:003:0 0 2 >
toggling mute on software return 1 (hard right pan), analog out 1/2
ffff8803e0948300 4039205995 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 0080
ffff8803e0948300 4039206407 C Co:2:003:0 0 2 >
ffff8804047eb540 4039862082 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 0000
ffff8804047eb540 4039862528 C Co:2:003:0 0 2 >
volume slider starting at max(0db) sliding down on software return 1
(centered), analog out 1/2
ffff880348410600 4093231001 S Co:2:003:0 s 21 01 0100 4001 0002 2 = cffc
ffff880348410600 4093231440 C Co:2:003:0 0 2 >
ffff880348410600 4093234037 S Co:2:003:0 s 21 01 0101 4001 0002 2 = cffc
ffff880348410600 4093234440 C Co:2:003:0 0 2 >
ffff880348412540 4093274051 S Co:2:003:0 s 21 01 0100 4001 0002 2 = a1fc
ffff880348412540 4093274567 C Co:2:003:0 0 2 >
ffff8803485e2240 4093276987 S Co:2:003:0 s 21 01 0101 4001 0002 2 = a1fc
ffff8803485e2240 4093277440 C Co:2:003:0 0 2 >
ffff8803485e1e40 4094062031 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 71fc
ffff8803485e1e40 4094062409 C Co:2:003:0 0 2 >
ffff8803485e1e40 4094065065 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 71fc
ffff8803485e1e40 4094065533 C Co:2:003:0 0 2 >
ffff8803485e2b40 4094116974 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 42fc
ffff8803485e2b40 4094117408 C Co:2:003:0 0 2 >
ffff8803485e2b40 4094120025 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 42fc
ffff8803485e2b40 4094120408 C Co:2:003:0 0 2 >
ffff880348412cc0 4095241073 S Co:2:003:0 s 21 01 0100 4001 0002 2 = e1fb
ffff880348412cc0 4095241552 C Co:2:003:0 0 2 >
ffff880348412cc0 4095243963 S Co:2:003:0 s 21 01 0101 4001 0002 2 = e1fb
ffff880348412cc0 4095244427 C Co:2:003:0 0 2 >
volume slider starting at max(0db) sliding down on software return 1
(hard left pan), analog out 1/2
ffff8803484109c0 58930083 S Co:2:003:0 s 21 01 0100 4001 0002 2 = d2ff
ffff8803484109c0 58930493 C Co:2:003:0 0 2 >
ffff8803484109c0 59022034 S Co:2:003:0 s 21 01 0100 4001 0002 2 = a3ff
ffff8803484109c0 59022492 C Co:2:003:0 0 2 >
ffff8803484103c0 59660057 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 74ff
ffff8803484103c0 59660515 C Co:2:003:0 0 2 >
ffff8803484103c0 59668011 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 44ff
ffff8803484103c0 59668502 C Co:2:003:0 0 2 >
ffff8803484103c0 59698056 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 14ff
ffff8803484103c0 59698514 C Co:2:003:0 0 2 >
ffff880404f83840 59762997 S Co:2:003:0 s 21 01 0100 4001 0002 2 = e4fe
ffff880404f83840 59763488 C Co:2:003:0 0 2 >
ffff8803e4dc3600 59859000 S Co:2:003:0 s 21 01 0100 4001 0002 2 = b3fe
ffff8803e4dc3600 59859486 C Co:2:003:0 0 2 >
volume slider starting at max(0db) sliding down on software return 1
(hard right pan), analog out 1/2
ffff8803e09e1000 92304977 S Co:2:003:0 s 21 01 0101 4001 0002 2 = d2ff
ffff8803e09e1000 92305391 C Co:2:003:0 0 2 >
ffff8803e09e1000 92349071 S Co:2:003:0 s 21 01 0101 4001 0002 2 = a3ff
ffff8803e09e1000 92349516 C Co:2:003:0 0 2 >
ffff8803e45d1240 92386949 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 74ff
ffff8803e45d1240 92387390 C Co:2:003:0 0 2 >
ffff8803e0999d80 92720056 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 44ff
ffff8803e0999d80 92720540 C Co:2:003:0 0 2 >
ffff88040069a540 92806078 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 14ff
ffff88040069a540 92806512 C Co:2:003:0 0 2 >
ffff8803e47e16c0 92970046 S Co:2:003:0 s 21 01 0101 4001 0002 2 = e4fe
ffff8803e47e16c0 92970538 C Co:2:003:0 0 2 >
ffff8803f1b47900 93019042 S Co:2:003:0 s 21 01 0101 4001 0002 2 = b3fe
ffff8803f1b47900 93019528 C Co:2:003:0 0 2 >
ffff8803e0999cc0 93057231 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 82fe
ffff8803e0999cc0 93057646 C Co:2:003:0 0 2 >
ffff8803f1b47480 93149025 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 50fe
ffff8803f1b47480 93149509 C Co:2:003:0 0 2 >
adjusting pan starting at center and volume max(0db) going left on
software return 1 (hard right pan), analog out 1/2
ffff8803f1adda80 168635963 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 0bfd
ffff8803f1adda80 168636396 C Co:2:003:0 0 2 >
ffff8803f1adda80 168638996 S Co:2:003:0 s 21 01 0101 4001 0002 2 = f0fc
ffff8803f1adda80 168639395 C Co:2:003:0 0 2 >
ffff8803f1adda80 168646993 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 26fd
ffff8803f1adda80 168647380 C Co:2:003:0 0 2 >
ffff8803485e1d80 168649992 S Co:2:003:0 s 21 01 0101 4001 0002 2 = d4fc
ffff8803485e1d80 168650382 C Co:2:003:0 0 2 >
ffff88034843d480 168664021 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 40fd
ffff88034843d480 168664494 C Co:2:003:0 0 2 >
ffff88034843d480 168667043 S Co:2:003:0 s 21 01 0101 4001 0002 2 = b8fc
ffff88034843d480 168667493 C Co:2:003:0 0 2 >
ffff8803485e1780 168699997 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 71fd
ffff8803485e1780 168700367 C Co:2:003:0 0 2 >
ffff8803485e1780 168703030 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 7dfc
ffff8803485e1780 168703490 C Co:2:003:0 0 2 >
adjusting pan starting at center and volume max(0db) going right on
software return 1 (hard right pan), analog out 1/2
ffff8804004789c0 199900005 S Co:2:003:0 s 21 01 0100 4001 0002 2 = d4fc
ffff8804004789c0 199900407 C Co:2:003:0 0 2 >
ffff8804004789c0 199903042 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 26fd
ffff8804004789c0 199903406 C Co:2:003:0 0 2 >
ffff8804004789c0 199947000 S Co:2:003:0 s 21 01 0100 4001 0002 2 = b8fc
ffff8804004789c0 199947406 C Co:2:003:0 0 2 >
ffff8804004789c0 199950033 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 40fd
ffff8804004789c0 199950406 C Co:2:003:0 0 2 >
ffff8804004789c0 200613069 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 9bfc
ffff8804004789c0 200613527 C Co:2:003:0 0 2 >
ffff8804004789c0 200615964 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 59fd
ffff8804004789c0 200616413 C Co:2:003:0 0 2 >
ffff8804004789c0 200638078 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 7dfc
ffff8804004789c0 200638526 C Co:2:003:0 0 2 >
ffff8804004789c0 200640977 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 71fd
ffff8804004789c0 200641400 C Co:2:003:0 0 2 >
ffff8804004789c0 200700977 S Co:2:003:0 s 21 01 0100 4001 0002 2 = 5efc
ffff8804004789c0 200701401 C Co:2:003:0 0 2 >
ffff8804004789c0 200704023 S Co:2:003:0 s 21 01 0101 4001 0002 2 = 89fd
ffff8804004789c0 200704400 C Co:2:003:0 0 2 >
On 04/29/2012 02:51 AM, Felix Homann wrote:
> Hi Chris,
>
> 2012/4/29 Chris Cavey<chris-alsa@rauros.net>:
>> I did some more digging on the mixer setup of the C400 using
>> usbmon+tcpdump+wireshark. I'm happy to provide binary captures if it helps.
> thanks.
>
>
>> In 2,0x012a,0x12b,0x012c,0x012d,0x012e,0x012f
>> In 3,0x0130,0x0131,,,,0x0135
>> In 4,0x0136,0x0137,,,,0x013b
> Ok, it seems the controls are organized differently ("flat") than on
> the FTUs ("matrix").
>
>
>> Also captured some sample rate adjustment values
>>
>> wValue = 0x0100 (always)
>> wIndex = 33025
>>
>> values in the data for the sample rates
>> 0x00770100 => 96000
>> 0x44ac0000 => 44100
>> 0x80bb0000 => 48000
>> 0x88580100 => 88200
> This seems pretty standard.
>
> Could you please post some usbmon output since I need to know the unit
> id and the value range of the controls as well. You can even shorten
> those logs by just sending the output of 'grep Co some.log'. It should
> look something like this:
>
> ffff88007d9d70c0 3382435826 S Co:1:003:0 s 21 01 0201 0500 0002 2 = 92f3
> ffff88007d9d70c0 3382436191 C Co:1:003:0 0 2>
> ffff88007d9d70c0 3382441208 S Co:1:003:0 s 21 01 0101 0500 0002 2 = 92f3
> ffff88007d9d70c0 3382441565 C Co:1:003:0 0 2>
> ffff88007d9d70c0 3383137494 S Co:1:003:0 s 21 01 0201 0500 0002 2 = fefc
> ffff88007d9d70c0 3383137823 C Co:1:003:0 0 2>
> ffff88007d9d70c0 3383141778 S Co:1:003:0 s 21 01 0101 0500 0002 2 = fefc
> ffff88007d9d70c0 3383142070 C Co:1:003:0 0 2>
>
> (This is changing the volume for Monitor1/2, Input 1 on the FTU).
>
> I don't need a log for every control just the first and last of a kind
> would suffice.
>
> Regards,
>
> Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-29 13:30 ` Chris Cavey
@ 2012-05-02 10:05 ` Felix Homann
2012-05-02 20:44 ` Chris Cavey
0 siblings, 1 reply; 30+ messages in thread
From: Felix Homann @ 2012-05-02 10:05 UTC (permalink / raw)
To: chris-alsa; +Cc: Grant Diffey, alsa-devel
[-- Attachment #1: Type: text/plain, Size: 943 bytes --]
Hi,
thanks for the usbmon logs.
Here's small patch for mixer_quirks.c that might get you *some*
controls (should be 16 controls). I could not even try to compile this
at the moment so it might be completely broken ;-)
If you don't hear any sound it would still be a success if you can
actually control the controls. Please, also take a look at usbmon
output (grep Co) and see if we really match the corresponding Windows
messages.
Due to the flat layout of the mixer we can't get more controls within
the current quirk without a couple of deeper changes in mixer.c. I'm
hesitating to do something like this without knowing if it's actually
needed *and* sufficient.
Hence, could you please send usbmon logs of the effect controls.
Again, I'm only interested in the "Co" lines.
(If the effect controls extend the flat layout we need to write our
own get/set functions anyway and there was no need for dealing with
mixer.c)
Regards,
Felix
[-- Attachment #2: c400_test.diff --]
[-- Type: application/octet-stream, Size: 1732 bytes --]
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 12125ca..2ba4a28 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -925,6 +925,52 @@ static int snd_ftu_create_mixer(struct usb_mixer_interface *mixer)
}
+/* Try to create mixer controls for M-Audio C400 */
+static int snd_c400_create_vol_ctls(struct usb_mixer_interface *mixer)
+{
+ char name[64];
+ unsigned int control, cmask;
+ int in, out, err;
+
+ const unsigned int id = 0x40;
+ const int val_type = USB_MIXER_S16;
+ const control = 1;
+
+ for (in = 0; in < 10; in++) {
+ for (out = 0; out < 6; out++) {
+ /* Give it a name */
+ if(in < 6) {
+ snprintf(name, sizeof(name),
+ "DIn%d - Out%d Playback Volume",
+ in + 1, out + 1);
+ } else {
+ snprintf(name, sizeof(name),
+ "AIn%d - Out%d Playback Volume",
+ in - 6, out + 1);
+ }
+ /* Create as many controls as possible a.t.m. */
+ if (in * 6 + out < MAX_CHANNELS {
+ cmask = 1 << (in * 6 + out);
+ err = snd_create_std_mono_ctl(mixer, id, control,
+ cmask, val_type, name,
+ &snd_usb_mixer_vol_tlv);
+ if (err < 0)
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int snd_c400_create_mixer(struct usb_mixer_interface *mixer)
+{
+ int err = 0;
+ err = snd_c400_create_vol_ctls(mixer);
+
+ return err;
+}
+
/*
* Create mixer for Electrix Ebox-44
*
@@ -1025,6 +1071,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
err = snd_ftu_create_mixer(mixer);
break;
+ case USB_ID(0x0763, 0x2030): /* M-Audio C400 */
+ err = snd_c400_create_mixer(mixer);
+ break;
+
case USB_ID(0x0b05, 0x1739):
case USB_ID(0x0b05, 0x1743):
err = snd_xonar_u1_controls_create(mixer);
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-05-02 10:05 ` Felix Homann
@ 2012-05-02 20:44 ` Chris Cavey
2012-05-03 14:58 ` Felix Homann
0 siblings, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-05-02 20:44 UTC (permalink / raw)
To: Felix Homann; +Cc: Grant Diffey, alsa-devel
I got it to compile just fine - missing paren in the MAX_CHANNEL if,
duplicate definition of control.
alsamixer shows mixers but the values are all zero and cannot be adjusted.
usbmon captures for effect and any remaining control panel widgets I
could find
usbmon for adjusting the effects send volume (doesn't matter if which
output is selected)
ffff8803e1a5b3c0 2382776826 S Co:2:003:0 s 21 01 0100 4201 0002 2 = 03b4
ffff8803e1a5b3c0 2382777292 C Co:2:003:0 0 2 >
ffff8803e1a5b3c0 2385038760 S Co:2:003:0 s 21 01 0101 4201 0002 2 = 0080
ffff8803e1a5b3c0 2385039277 C Co:2:003:0 0 2 >
ffff8803dcb32540 2387392782 S Co:2:003:0 s 21 01 0102 4201 0002 2 = 03b4
ffff8803dcb32540 2387393233 C Co:2:003:0 0 2 >
ffff8803e1bf9f00 2388700780 S Co:2:003:0 s 21 01 0103 4201 0002 2 = e5b7
ffff8803e1bf9f00 2388701259 C Co:2:003:0 0 2 >
ffff8803e1bf9f00 2389689845 S Co:2:003:0 s 21 01 0104 4201 0002 2 = 03b4
ffff8803e1bf9f00 2389690228 C Co:2:003:0 0 2 >
ffff8803e1bf9f00 2390616736 S Co:2:003:0 s 21 01 0105 4201 0002 2 = 03b4
ffff8803e1bf9f00 2390617223 C Co:2:003:0 0 2 >
ffff8803e1bf9f00 2393137750 S Co:2:003:0 s 21 01 0106 4201 0002 2 = 03b4
ffff8803e1bf9f00 2393138194 C Co:2:003:0 0 2 >
ffff8803e1bf9f00 2394557798 S Co:2:003:0 s 21 01 0107 4201 0002 2 = fbb5
ffff8803e1bf9f00 2394558184 C Co:2:003:0 0 2 >
ffff8803e1bf9f00 2395823861 S Co:2:003:0 s 21 01 0108 4201 0002 2 = fbb5
ffff8803e1bf9f00 2395824329 C Co:2:003:0 0 2 >
ffff8803e1bf9f00 2397001750 S Co:2:003:0 s 21 01 0109 4201 0002 2 = 92bb
ffff8803e1bf9f00 2397002168 C Co:2:003:0 0 2 >
changing the effect type:
ffff8803f0c5a000 2643006814 S Co:2:003:0 s 21 01 0200 4301 0001 1 = 00
(00-08, Room 1 through Echo)
ffff8803f0c5a000 2643007241 C Co:2:003:0 0 1 >
effect duration:
ffff8803e1af5cc0 2695371771 S Co:2:003:0 s 21 01 0400 4301 0002 2 = c81b
ffff8803e1af5cc0 2695372257 C Co:2:003:0 0 2 >
effect feedback:
ffff8803dcb32a80 2711915828 S Co:2:003:0 s 21 01 0500 4301 0001 1 = 23
ffff8803dcb32a80 2711916269 C Co:2:003:0 0 1 >
effect volume:
ffff880400ee8e40 2731234853 S Co:2:003:0 s 21 01 0300 4301 0001 1 = 37
ffff880400ee8e40 2731235264 C Co:2:003:0 0 1 >
overall effect return volume:
ffff8803e1bf9480 2765908779 S Co:2:003:0 s 21 01 013c 4001 0002 2 = d4ff
ffff8803e1bf9480 2765909151 C Co:2:003:0 0 2 >
ffff8803e1bf9480 2765911816 S Co:2:003:0 s 21 01 0143 4001 0002 2 = d4ff
ffff8803e1bf9480 2765912275 C Co:2:003:0 0 2 >
master volume (moved one notch):
ffff8803e1a47e40 2836313798 S Co:2:003:0 s 21 01 0124 4001 0002 2 = d1fc
ffff8803e1a47e40 2836314199 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836316831 S Co:2:003:0 s 21 01 012a 4001 0002 2 = d1fc
ffff8803e1a47e40 2836317296 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836319865 S Co:2:003:0 s 21 01 0130 4001 0002 2 = d1fc
ffff8803e1a47e40 2836320309 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836322759 S Co:2:003:0 s 21 01 0136 4001 0002 2 = d1fc
ffff8803e1a47e40 2836323198 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836325793 S Co:2:003:0 s 21 01 0100 4001 0002 2 = d1fc
ffff8803e1a47e40 2836326172 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836328826 S Co:2:003:0 s 21 01 0106 4001 0002 2 = d1fc
ffff8803e1a47e40 2836329323 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836331783 S Co:2:003:0 s 21 01 010c 4001 0002 2 = d1fc
ffff8803e1a47e40 2836332185 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836334757 S Co:2:003:0 s 21 01 0112 4001 0002 2 = d1fc
ffff8803e1a47e40 2836335172 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836337793 S Co:2:003:0 s 21 01 0118 4001 0002 2 = d1fc
ffff8803e1a47e40 2836338171 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836340827 S Co:2:003:0 s 21 01 011e 4001 0002 2 = d1fc
ffff8803e1a47e40 2836341297 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836343864 S Co:2:003:0 s 21 01 013c 4001 0002 2 = d4ff
ffff8803e1a47e40 2836344296 C Co:2:003:0 0 2 >
ffff880401863300 2836346765 S Co:2:003:0 s 21 01 0125 4001 0002 2 = d1fc
ffff880401863300 2836347168 C Co:2:003:0 0 2 >
ffff880401863300 2836349869 S Co:2:003:0 s 21 01 012b 4001 0002 2 = d1fc
ffff880401863300 2836350293 C Co:2:003:0 0 2 >
ffff880401863300 2836352833 S Co:2:003:0 s 21 01 0131 4001 0002 2 = d1fc
ffff880401863300 2836353294 C Co:2:003:0 0 2 >
ffff880401863300 2836355759 S Co:2:003:0 s 21 01 0137 4001 0002 2 = d1fc
ffff880401863300 2836356167 C Co:2:003:0 0 2 >
ffff8803e1a3ff00 2836358806 S Co:2:003:0 s 21 01 0101 4001 0002 2 = d1fc
ffff8803e1a3ff00 2836359294 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836361795 S Co:2:003:0 s 21 01 0107 4001 0002 2 = d1fc
ffff8803e1a47e40 2836362174 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836364826 S Co:2:003:0 s 21 01 010d 4001 0002 2 = d1fc
ffff8803e1a47e40 2836365295 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836367862 S Co:2:003:0 s 21 01 0113 4001 0002 2 = d1fc
ffff8803e1a47e40 2836368293 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836370756 S Co:2:003:0 s 21 01 0119 4001 0002 2 = d1fc
ffff8803e1a47e40 2836371170 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836373791 S Co:2:003:0 s 21 01 011f 4001 0002 2 = d1fc
ffff8803e1a47e40 2836374169 C Co:2:003:0 0 2 >
ffff8803e1a47e40 2836376830 S Co:2:003:0 s 21 01 0143 4001 0002 2 = d4ff
ffff8803e1a47e40 2836377296 C Co:2:003:0 0 2 >
toggling clock source:
ffff88040087f3c0 2880985746 S Co:2:003:0 s 21 01 0100 8001 0001 1 = 01
(01 = internal, 02 = external)
ffff88040087f3c0 2880987241 C Co:2:003:0 0 1 >
from mixer control panel "Master Volume Controls" check boxes for
AnalogOut1/2 and AnalogOut3/4:
ffff8803dcb32e40 3038896784 S Co:2:003:0 s 21 03 0006 2001 0001 1 = 03
(bit 0 = 1/2, bit 1 = 3/4)
ffff8803dcb32e40 3038897166 C Co:2:003:0 0 1 >
"disable host control" checkbox:
ffff8803e1bf9a80 3137226621 S Co:2:003:0 s 21 03 0000 2001 0001 1 = 02
(same value regardless of checkbox state)
ffff8803e1bf9a80 3137226993 C Co:2:003:0 0 1 >
On 05/02/2012 06:05 AM, Felix Homann wrote:
> Hi,
>
> thanks for the usbmon logs.
>
> Here's small patch for mixer_quirks.c that might get you *some*
> controls (should be 16 controls). I could not even try to compile this
> at the moment so it might be completely broken ;-)
>
> If you don't hear any sound it would still be a success if you can
> actually control the controls. Please, also take a look at usbmon
> output (grep Co) and see if we really match the corresponding Windows
> messages.
>
> Due to the flat layout of the mixer we can't get more controls within
> the current quirk without a couple of deeper changes in mixer.c. I'm
> hesitating to do something like this without knowing if it's actually
> needed *and* sufficient.
>
> Hence, could you please send usbmon logs of the effect controls.
> Again, I'm only interested in the "Co" lines.
> (If the effect controls extend the flat layout we need to write our
> own get/set functions anyway and there was no need for dealing with
> mixer.c)
>
> Regards,
>
> Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-05-02 20:44 ` Chris Cavey
@ 2012-05-03 14:58 ` Felix Homann
2012-05-04 4:54 ` Chris Cavey
0 siblings, 1 reply; 30+ messages in thread
From: Felix Homann @ 2012-05-03 14:58 UTC (permalink / raw)
To: chris-alsa; +Cc: Grant Diffey, alsa-devel
Hi,
2012/5/2 Chris Cavey <chris-alsa@rauros.net>:
> I got it to compile just fine - missing paren in the MAX_CHANNEL if,
> duplicate definition of control.
sorry for the errors.
>
> alsamixer shows mixers but the values are all zero and cannot be adjusted.
Hmm, please do the following:
(0. Switch the device off.)
1. Start usbmon capturing
2. Switch the device on
3. Start alsamixer and select the C400 device
Again, search for Co lines. Is there anything even close to the
control messages you saw on Windows?
>
> usbmon captures for effect and any remaining control panel widgets I could
> find
Thank you. From a quick glimpse they seem almost identical to the FTU,
just using a different interface/unitid. I will try to send another
patch in a couple of days.
BTW, is the clock source switch still there after applying my patch?
Regards,
Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-05-03 14:58 ` Felix Homann
@ 2012-05-04 4:54 ` Chris Cavey
2012-05-04 8:26 ` Felix Homann
0 siblings, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-05-04 4:54 UTC (permalink / raw)
To: Felix Homann; +Cc: Grant Diffey, alsa-devel
[-- Attachment #1: Type: text/plain, Size: 154 bytes --]
Attached are logs from win7 vm unplug/replug and my ubuntu 12.04 dev vm
with alsa mods.
I've also included a patch of my current set of modifications
[-- Attachment #2: changes.diff --]
[-- Type: text/x-patch, Size: 4284 bytes --]
diff --git a/usb/mixer.c b/usb/mixer.c
index 3d70245..4e42458 100644
--- a/usb/mixer.c
+++ b/usb/mixer.c
@@ -702,7 +702,8 @@ static int check_input_term(struct mixer_build *state, int id, struct usb_audio_
struct uac_processing_unit_descriptor *d = p1;
if (d->bNrInPins) {
id = d->baSourceID[0];
- break; /* continue to parse */
+ //break; /* continue to parse */
+ return 0;
}
term->type = d->bDescriptorSubtype << 16; /* virtual type */
term->channels = uac_processing_unit_bNrChannels(d);
diff --git a/usb/mixer_quirks.c b/usb/mixer_quirks.c
index 12125ca..a2a1ef5 100644
--- a/usb/mixer_quirks.c
+++ b/usb/mixer_quirks.c
@@ -925,6 +925,53 @@ static int snd_ftu_create_mixer(struct usb_mixer_interface *mixer)
}
+/* Try to create mixer controls for M-Audio C400 */
+static int snd_c400_create_vol_ctls(struct usb_mixer_interface *mixer)
+{
+ char name[64];
+ unsigned int cmask;
+ int in, out, err;
+
+ const unsigned int id = 0x40;
+ const int val_type = USB_MIXER_S16;
+ const control = 1;
+
+ for (in = 0; in < 10; in++) {
+ for (out = 0; out < 6; out++) {
+ /* Give it a name */
+ if(in < 6) {
+ snprintf(name, sizeof(name),
+ "DIn%d - Out%d Playback Volume",
+ in + 1, out + 1);
+ } else {
+ snprintf(name, sizeof(name),
+ "AIn%d - Out%d Playback Volume",
+ in - 6, out + 1);
+ }
+ /* Create as many controls as possible a.t.m. */
+ if (in * 6 + out < MAX_CHANNELS) {
+ cmask = 1 << (in * 6 + out);
+ printk(KERN_DEBUG "out = %d, in = %d, cmask=%x\n", out, in, cmask);
+ err = snd_create_std_mono_ctl(mixer, id, control,
+ cmask, val_type, name,
+ &snd_usb_mixer_vol_tlv);
+ if (err < 0)
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int snd_c400_create_mixer(struct usb_mixer_interface *mixer)
+{
+ int err = 0;
+ err = snd_c400_create_vol_ctls(mixer);
+
+ return err;
+}
+
/*
* Create mixer for Electrix Ebox-44
*
@@ -1025,6 +1072,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
err = snd_ftu_create_mixer(mixer);
break;
+ case USB_ID(0x0763, 0x2030): /* M-Audio C400 */
+ err = snd_c400_create_mixer(mixer);
+ break;
+
case USB_ID(0x0b05, 0x1739):
case USB_ID(0x0b05, 0x1743):
err = snd_xonar_u1_controls_create(mixer);
diff --git a/usb/quirks-table.h b/usb/quirks-table.h
index d89ab4c..9114f8c 100644
--- a/usb/quirks-table.h
+++ b/usb/quirks-table.h
@@ -2266,7 +2266,73 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
}
},
-
+{
+ USB_DEVICE_VENDOR_SPEC(0x0763, 0x2030),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "M-Audio", */
+ /* .product_name = "Fast Track C400", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = & (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_MIXER,
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = & (const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 4,
+ .iface = 2,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
+ .endpoint = 0x01,
+ .ep_attr = 0x09,
+ .rates = SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 44100,
+ .rate_max = 96000,
+ .nr_rates = 4,
+ .rate_table = (unsigned int[]) {
+ 44100, 48000, 88200, 96000
+ }
+ }
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = & (const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 6,
+ .iface = 3,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
+ .endpoint = 0x81,
+ .ep_attr = 0x05,
+ .rates = SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 44100,
+ .rate_max = 96000,
+ .nr_rates = 4,
+ .rate_table = (unsigned int[]) {
+ 44100, 48000, 88200, 96000
+ }
+ }
+ },
+ /* interface 4 (MIDI) is standard compliant */
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Casio devices */
{
USB_DEVICE(0x07cf, 0x6801),
[-- Attachment #3: ubuntu1204.txt --]
[-- Type: text/plain, Size: 1842 bytes --]
Unplug (Ubuntu 12.04 VM)
ffff880369405a80 1193301105 S Co:2:011:0 s 00 09 0001 0000 0000 0
ffff880369405a80 1193301470 C Co:2:011:0 0 0
ffff880369405f00 1193301609 S Co:2:011:0 s 21 0a 0000 0005 0000 0
ffff880369405f00 1193301929 C Co:2:011:0 0 0
Replug (Ubuntu 12.04 VM)
ffff8803fccb4a80 1037234014 S Co:2:011:0 s 01 0b 0000 0002 0000 0
ffff8803fccb4a80 1037234345 C Co:2:011:0 0 0
ffff8803fccb4a80 1037236029 S Co:2:011:0 s 01 0b 0000 0003 0000 0
ffff8803fccb4a80 1037236365 C Co:2:011:0 0 0
ffff8803fccb4240 1037247033 S Co:2:011:0 s 21 0a 0000 0005 0000 0
ffff8803fccb4240 1037247315 C Co:2:011:0 0 0
Followed by this in syslog:
ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x101, wIndex = 0x4001, type = 4
ALSA mixer.c:877 64:1: cannot get min/max values for control 1 (id 64)
alsamixer generates no "Co" when attempting to adjust values
alsamixer generates a "Ci" first (read current value?)
alsamixer start (Ci)
ffff880401422c00 1589115481 S Ci:2:011:0 s a1 01 0100 8001 0002 2 < //Checking clock?
ffff880401422c00 1589115869 C Ci:2:011:0 0 1 = 01
ffff880401422c00 1589120513 S Ci:2:011:0 s a1 01 0100 8001 0002 2 <
ffff880401422c00 1589120864 C Ci:2:011:0 0 1 = 01
ffff880401422c00 1589123541 S Ci:2:011:0 s a1 01 0100 8001 0002 2 <
ffff880401422c00 1589123866 C Ci:2:011:0 0 1 = 01
ffff880401422c00 1589126428 S Ci:2:011:0 s a1 01 0100 8001 0002 2 <
ffff880401422c00 1589126738 C Ci:2:011:0 0 1 = 01
alsamixer toggling clock works fine
alsamixer adjust "Din1 - Out1", windows never does this
ffff8803fccfacc0 1659629521 S Ci:2:011:0 s a1 01 0100 8001 0002 2 < //Checking clock?
ffff8803fccfacc0 1659629839 C Ci:2:011:0 0 1 = 01
alsamixer adjust "Din1 - Out2", windows never does this
ffff880369a2f300 1682163455 S Ci:2:011:0 s a1 01 0100 8001 0002 2 <
ffff880369a2f300 1682163797 C Ci:2:011:0 0 1 = 01
[-- Attachment #4: win7.txt --]
[-- Type: text/plain, Size: 12231 bytes --]
Unplug (Win7 VM)
ffff8803dec60240 736093195 S Co:2:011:0 s 01 0b 0000 0002 0000 0
ffff8803dec60240 736093553 C Co:2:011:0 0 0
ffff8803dec60240 736093622 S Co:2:011:0 s 01 0b 0000 0003 0000 0
ffff8803dec60240 736093952 C Co:2:011:0 0 0
ffff8803cf472600 736260912 S Co:2:011:0 s 00 09 0001 0000 0000 0
ffff8803cf472600 736261233 C Co:2:011:0 0 0
ffff8803cf472840 736261376 S Co:2:011:0 s 21 0a 0000 0005 0000 0
ffff8803cf472840 736261701 C Co:2:011:0 0 0
Replug (Win7 VM)
ffff8803fce97cc0 743034698 S Co:2:011:0 s 01 0b 0000 0002 0000 0
ffff8803fce97cc0 743035029 C Co:2:011:0 0 0
ffff8803fce97cc0 743036583 S Co:2:011:0 s 01 0b 0000 0003 0000 0
ffff8803fce97cc0 743036934 C Co:2:011:0 0 0
ffff8803f952c240 743084105 S Co:2:011:0 s 21 01 0100 8101 0004 4 = 80bb0000
ffff8803f952c240 743085580 C Co:2:011:0 0 4 >
ffff8804009ad300 743089186 S Co:2:011:0 s 21 01 0100 8001 0001 1 = 01
ffff8804009ad300 743090625 C Co:2:011:0 0 1 >
ffff8804009ad300 743093241 S Co:2:011:0 s 01 0b 0000 0002 0000 0
ffff8804009ad300 743093501 C Co:2:011:0 0 0
ffff8804009ad300 743095253 S Co:2:011:0 s 01 0b 0000 0003 0000 0
ffff8804009ad300 743095625 C Co:2:011:0 0 0
ffff8804009ad540 743232173 S Co:2:011:0 s 01 0b 0001 0002 0000 0
ffff8804009ad540 743232499 C Co:2:011:0 0 0
ffff8804017aca80 743234179 S Co:2:011:0 s 01 0b 0001 0003 0000 0
ffff8804017aca80 743234523 C Co:2:011:0 0 0
ffff8804017ac000 743238366 S Co:2:011:0 s 21 0a 0000 0005 0000 0
ffff8804017ac000 743238624 C Co:2:011:0 0 0
ffff8804017acd80 743601365 S Co:2:011:0 s 21 01 0124 4001 0002 2 = fefc
ffff8804017acd80 743601769 C Co:2:011:0 0 2 >
ffff8804017acd80 743604965 S Co:2:011:0 s 21 01 0125 4001 0002 2 = fefc
ffff8804017acd80 743605371 C Co:2:011:0 0 2 >
ffff8804017acd80 743609211 S Co:2:011:0 s 21 01 012a 4001 0002 2 = fefc
ffff8804017acd80 743609620 C Co:2:011:0 0 2 >
ffff8804017acd80 743612110 S Co:2:011:0 s 21 01 012b 4001 0002 2 = fefc
ffff8804017acd80 743612495 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743615146 S Co:2:011:0 s 21 01 0130 4001 0002 2 = fefc
ffff8804009ad9c0 743615620 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743618179 S Co:2:011:0 s 21 01 0131 4001 0002 2 = fefc
ffff8804009ad9c0 743618619 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743621437 S Co:2:011:0 s 21 01 0136 4001 0002 2 = fefc
ffff8804009ad9c0 743621871 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743629171 S Co:2:011:0 s 21 01 0137 4001 0002 2 = fefc
ffff8804009ad9c0 743629621 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743634913 S Co:2:011:0 s 21 01 0100 4001 0002 2 = fefc
ffff8804009ad9c0 743635372 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743642915 S Co:2:011:0 s 21 01 0101 4001 0002 2 = fefc
ffff8804009ad9c0 743643370 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743647332 S Co:2:011:0 s 21 01 0106 4001 0002 2 = fefc
ffff8804009ad9c0 743647745 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743652820 S Co:2:011:0 s 21 01 0107 4001 0002 2 = fefc
ffff8804009ad9c0 743653244 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743656848 S Co:2:011:0 s 21 01 010c 4001 0002 2 = fefc
ffff8804009ad9c0 743657247 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743659883 S Co:2:011:0 s 21 01 010d 4001 0002 2 = fefc
ffff8804009ad9c0 743660246 C Co:2:011:0 0 2 >
ffff8804009adf00 743662799 S Co:2:011:0 s 21 01 0112 4001 0002 2 = fefc
ffff8804009adf00 743663247 C Co:2:011:0 0 2 >
ffff8804009adf00 743665814 S Co:2:011:0 s 21 01 0113 4001 0002 2 = fefc
ffff8804009adf00 743666246 C Co:2:011:0 0 2 >
ffff8804009adf00 743668909 S Co:2:011:0 s 21 01 0118 4001 0002 2 = fefc
ffff8804009adf00 743669370 C Co:2:011:0 0 2 >
ffff8804009adf00 743671816 S Co:2:011:0 s 21 01 0119 4001 0002 2 = fefc
ffff8804009adf00 743672246 C Co:2:011:0 0 2 >
ffff8804009adf00 743674776 S Co:2:011:0 s 21 01 011e 4001 0002 2 = fefc
ffff8804009adf00 743675245 C Co:2:011:0 0 2 >
ffff8803fce976c0 743677811 S Co:2:011:0 s 21 01 011f 4001 0002 2 = fefc
ffff8803fce976c0 743678269 C Co:2:011:0 0 2 >
ffff8803fce976c0 743680845 S Co:2:011:0 s 21 01 013c 4001 0002 2 = 0000
ffff8803fce976c0 743681245 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743683873 S Co:2:011:0 s 21 01 013d 4001 0002 2 = 0080
ffff8804009ad9c0 743684259 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743686870 S Co:2:011:0 s 21 01 0142 4001 0002 2 = 0080
ffff8804009ad9c0 743687261 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743689816 S Co:2:011:0 s 21 01 0143 4001 0002 2 = 0000
ffff8804009ad9c0 743690250 C Co:2:011:0 0 2 >
ffff8804009ad9c0 743692872 S Co:2:011:0 s 21 01 0100 4201 0002 2 = 0080
ffff8804009ad9c0 743693246 C Co:2:011:0 0 2 >
ffff8803fce976c0 743695781 S Co:2:011:0 s 21 01 0101 4201 0002 2 = 0080
ffff8803fce976c0 743696249 C Co:2:011:0 0 2 >
ffff8803fce976c0 743698783 S Co:2:011:0 s 21 01 0102 4201 0002 2 = fbb5
ffff8803fce976c0 743699259 C Co:2:011:0 0 2 >
ffff8803fce976c0 743701810 S Co:2:011:0 s 21 01 0103 4201 0002 2 = e5b7
ffff8803fce976c0 743702266 C Co:2:011:0 0 2 >
ffff8803fce976c0 743704846 S Co:2:011:0 s 21 01 0104 4201 0002 2 = e5b7
ffff8803fce976c0 743705260 C Co:2:011:0 0 2 >
ffff8803fce976c0 743707883 S Co:2:011:0 s 21 01 0105 4201 0002 2 = 0080
ffff8803fce976c0 743708393 C Co:2:011:0 0 2 >
ffff8803fce976c0 743710775 S Co:2:011:0 s 21 01 0106 4201 0002 2 = 03b4
ffff8803fce976c0 743711260 C Co:2:011:0 0 2 >
ffff8803fce976c0 743713809 S Co:2:011:0 s 21 01 0107 4201 0002 2 = fbb5
ffff8803fce976c0 743714259 C Co:2:011:0 0 2 >
ffff8803fce976c0 743727362 S Co:2:011:0 s 21 01 0108 4201 0002 2 = e5b7
ffff8803fce976c0 743727760 C Co:2:011:0 0 2 >
ffff8803fce976c0 743730412 S Co:2:011:0 s 21 01 0109 4201 0002 2 = c2b9
ffff8803fce976c0 743730869 C Co:2:011:0 0 2 >
ffff8803fce976c0 743733367 S Co:2:011:0 s 21 03 0000 2001 0001 1 = 02
ffff8803fce976c0 743733760 C Co:2:011:0 0 1 >
ffff8803fce976c0 743736356 S Co:2:011:0 s 21 01 0126 4001 0002 2 = fefc
ffff8803fce976c0 743736759 C Co:2:011:0 0 2 >
ffff8803fce976c0 743739345 S Co:2:011:0 s 21 01 0127 4001 0002 2 = fefc
ffff8803fce976c0 743739759 C Co:2:011:0 0 2 >
ffff8803fce976c0 743742384 S Co:2:011:0 s 21 01 012c 4001 0002 2 = fefc
ffff8803fce976c0 743742885 C Co:2:011:0 0 2 >
ffff8803fce976c0 743745275 S Co:2:011:0 s 21 01 012d 4001 0002 2 = fefc
ffff8803fce976c0 743745760 C Co:2:011:0 0 2 >
ffff8803fce976c0 743748365 S Co:2:011:0 s 21 01 0132 4001 0002 2 = fefc
ffff8803fce976c0 743748760 C Co:2:011:0 0 2 >
ffff8803fce976c0 743751366 S Co:2:011:0 s 21 01 0133 4001 0002 2 = fefc
ffff8803fce976c0 743751759 C Co:2:011:0 0 2 >
ffff8803fce976c0 743754396 S Co:2:011:0 s 21 01 0138 4001 0002 2 = fefc
ffff8803fce976c0 743754870 C Co:2:011:0 0 2 >
ffff8803fce976c0 743759321 S Co:2:011:0 s 21 01 0139 4001 0002 2 = fefc
ffff8803fce976c0 743759743 C Co:2:011:0 0 2 >
ffff8803fce976c0 743766405 S Co:2:011:0 s 21 01 0102 4001 0002 2 = fefc
ffff8803fce976c0 743766893 C Co:2:011:0 0 2 >
ffff8803fce976c0 743768821 S Co:2:011:0 s 21 01 0103 4001 0002 2 = fefc
ffff8803fce976c0 743769296 C Co:2:011:0 0 2 >
ffff8803fce976c0 743771915 S Co:2:011:0 s 21 01 0108 4001 0002 2 = fefc
ffff8803fce976c0 743772394 C Co:2:011:0 0 2 >
ffff8803fce976c0 743774882 S Co:2:011:0 s 21 01 0109 4001 0002 2 = fefc
ffff8803fce976c0 743775395 C Co:2:011:0 0 2 >
ffff8803fce976c0 743777971 S Co:2:011:0 s 21 01 010e 4001 0002 2 = fefc
ffff8803fce976c0 743778396 C Co:2:011:0 0 2 >
ffff8803fce976c0 743780800 S Co:2:011:0 s 21 01 010f 4001 0002 2 = fefc
ffff8803fce976c0 743781244 C Co:2:011:0 0 2 >
ffff8804009adb40 743783861 S Co:2:011:0 s 21 01 0114 4001 0002 2 = fefc
ffff8804009adb40 743784245 C Co:2:011:0 0 2 >
ffff8804009adb40 743786897 S Co:2:011:0 s 21 01 0115 4001 0002 2 = fefc
ffff8804009adb40 743787370 C Co:2:011:0 0 2 >
ffff8804009adb40 743789903 S Co:2:011:0 s 21 01 011a 4001 0002 2 = fefc
ffff8804009adb40 743790368 C Co:2:011:0 0 2 >
ffff8804009adb40 743792798 S Co:2:011:0 s 21 01 011b 4001 0002 2 = fefc
ffff8804009adb40 743793251 C Co:2:011:0 0 2 >
ffff8804009ad180 743795837 S Co:2:011:0 s 21 01 0120 4001 0002 2 = fefc
ffff8804009ad180 743796243 C Co:2:011:0 0 2 >
ffff8804009ad180 743798896 S Co:2:011:0 s 21 01 0121 4001 0002 2 = fefc
ffff8804009ad180 743799368 C Co:2:011:0 0 2 >
ffff8804017acd80 743801916 S Co:2:011:0 s 21 01 013e 4001 0002 2 = 0000
ffff8804017acd80 743802368 C Co:2:011:0 0 2 >
ffff8804009ad180 743804823 S Co:2:011:0 s 21 01 013f 4001 0002 2 = 0080
ffff8804009ad180 743805245 C Co:2:011:0 0 2 >
ffff8804009adb40 743807841 S Co:2:011:0 s 21 01 0144 4001 0002 2 = 0080
ffff8804009adb40 743808243 C Co:2:011:0 0 2 >
ffff8804009adb40 743810874 S Co:2:011:0 s 21 01 0145 4001 0002 2 = 0000
ffff8804009adb40 743811247 C Co:2:011:0 0 2 >
ffff8804017ac240 743813968 S Co:2:011:0 s 21 01 0128 4001 0002 2 = fefc
ffff8804017ac240 743814376 C Co:2:011:0 0 2 >
ffff8804017ac240 743816823 S Co:2:011:0 s 21 01 0129 4001 0002 2 = fefc
ffff8804017ac240 743817249 C Co:2:011:0 0 2 >
ffff8804017ac240 743819836 S Co:2:011:0 s 21 01 012e 4001 0002 2 = fefc
ffff8804017ac240 743820245 C Co:2:011:0 0 2 >
ffff8804017ac240 743822948 S Co:2:011:0 s 21 01 012f 4001 0002 2 = fefc
ffff8804017ac240 743823370 C Co:2:011:0 0 2 >
ffff8804017ac240 743825911 S Co:2:011:0 s 21 01 0134 4001 0002 2 = fefc
ffff8804017ac240 743826369 C Co:2:011:0 0 2 >
ffff8804017ac240 743828804 S Co:2:011:0 s 21 01 0135 4001 0002 2 = fefc
ffff8804017ac240 743829244 C Co:2:011:0 0 2 >
ffff8804017ac240 743831839 S Co:2:011:0 s 21 01 013a 4001 0002 2 = fefc
ffff8804017ac240 743832245 C Co:2:011:0 0 2 >
ffff8804017ac240 743834880 S Co:2:011:0 s 21 01 013b 4001 0002 2 = fefc
ffff8804017ac240 743835371 C Co:2:011:0 0 2 >
ffff8804017ac240 743837921 S Co:2:011:0 s 21 01 0104 4001 0002 2 = fefc
ffff8804017ac240 743838370 C Co:2:011:0 0 2 >
ffff8804017ac240 743840855 S Co:2:011:0 s 21 01 0105 4001 0002 2 = fefc
ffff8804017ac240 743841243 C Co:2:011:0 0 2 >
ffff8804017ac240 743844021 S Co:2:011:0 s 21 01 010a 4001 0002 2 = fefc
ffff8804017ac240 743844493 C Co:2:011:0 0 2 >
ffff8804017ac240 743846987 S Co:2:011:0 s 21 01 010b 4001 0002 2 = fefc
ffff8804017ac240 743847379 C Co:2:011:0 0 2 >
ffff8804017ac240 743849920 S Co:2:011:0 s 21 01 0110 4001 0002 2 = fefc
ffff8804017ac240 743850370 C Co:2:011:0 0 2 >
ffff8804017ac240 743852797 S Co:2:011:0 s 21 01 0111 4001 0002 2 = fefc
ffff8804017ac240 743853242 C Co:2:011:0 0 2 >
ffff8804017ac240 743855832 S Co:2:011:0 s 21 01 0116 4001 0002 2 = fefc
ffff8804017ac240 743856242 C Co:2:011:0 0 2 >
ffff8804017ac240 743858874 S Co:2:011:0 s 21 01 0117 4001 0002 2 = fefc
ffff8804017ac240 743859242 C Co:2:011:0 0 2 >
ffff8804009ada80 743861920 S Co:2:011:0 s 21 01 011c 4001 0002 2 = fefc
ffff8804009ada80 743862394 C Co:2:011:0 0 2 >
ffff880401333480 743864815 S Co:2:011:0 s 21 01 011d 4001 0002 2 = fefc
ffff880401333480 743865268 C Co:2:011:0 0 2 >
ffff880401333480 743867849 S Co:2:011:0 s 21 01 0122 4001 0002 2 = fefc
ffff880401333480 743868246 C Co:2:011:0 0 2 >
ffff880401333480 743870896 S Co:2:011:0 s 21 01 0123 4001 0002 2 = fefc
ffff880401333480 743871384 C Co:2:011:0 0 2 >
ffff880401333480 743873910 S Co:2:011:0 s 21 01 0140 4001 0002 2 = 0080
ffff880401333480 743874383 C Co:2:011:0 0 2 >
ffff880401333480 743876798 S Co:2:011:0 s 21 01 0141 4001 0002 2 = 0080
ffff880401333480 743877261 C Co:2:011:0 0 2 >
ffff880401333480 743879830 S Co:2:011:0 s 21 01 0146 4001 0002 2 = 0080
ffff880401333480 743880254 C Co:2:011:0 0 2 >
ffff880401333480 743882875 S Co:2:011:0 s 21 01 0147 4001 0002 2 = 0080
ffff880401333480 743883274 C Co:2:011:0 0 2 >
ffff880401333480 743885900 S Co:2:011:0 s 21 01 0200 4301 0001 1 = 00
ffff880401333480 743886509 C Co:2:011:0 0 1 >
ffff880401333480 743888798 S Co:2:011:0 s 21 01 0400 4301 0002 2 = c81b
ffff880401333480 743889242 C Co:2:011:0 0 2 >
ffff880401333480 743891884 S Co:2:011:0 s 21 01 0500 4301 0001 1 = 19
ffff880401333480 743892379 C Co:2:011:0 0 1 >
ffff880401333480 743895571 S Co:2:011:0 s 21 01 0300 4301 0001 1 = 31
ffff880401333480 743896005 C Co:2:011:0 0 1 >
ffff880401333480 743902756 S Co:2:011:0 s 21 03 0005 2001 0001 1 = 00
ffff880401333480 743903242 C Co:2:011:0 0 1 >
ffff880401333480 743910190 S Co:2:011:0 s 21 03 0004 2001 0010 16 = 005b002c 00000000 00000000 00000000
ffff880401333480 743910631 C Co:2:011:0 0 16 >
ffff880401333480 743913084 S Co:2:011:0 s 21 03 0006 2001 0001 1 = 03
ffff880401333480 743913587 C Co:2:011:0 0 1 >
ffff8804009ada80 744272081 S Co:2:011:0 s 21 09 0200 0005 0001 1 = 00
ffff8804009ada80 744272491 C Co:2:011:0 0 1 >
[-- Attachment #5: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-05-04 4:54 ` Chris Cavey
@ 2012-05-04 8:26 ` Felix Homann
2012-05-04 22:42 ` Chris Cavey
0 siblings, 1 reply; 30+ messages in thread
From: Felix Homann @ 2012-05-04 8:26 UTC (permalink / raw)
To: chris-alsa; +Cc: Grant Diffey, alsa-devel
[-- Attachment #1: Type: text/plain, Size: 308 bytes --]
Hi,
2012/5/4 Chris Cavey <chris-alsa@rauros.net>:
> Attached are logs from win7 vm unplug/replug and my ubuntu 12.04 dev vm with
> alsa mods.
Great!
>
> I've also included a patch of my current set of modifications
>
Thanks.
Could you please try if the attached patch changes anything?
Regards,
Felix
[-- Attachment #2: c400_force_uac1.diff --]
[-- Type: application/octet-stream, Size: 985 bytes --]
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 3d70245..70df2f9 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -369,7 +369,8 @@ error:
static int get_ctl_value(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
{
- return (cval->mixer->protocol == UAC_VERSION_1) ?
+ return (cval->mixer->protocol == UAC_VERSION_1 ||
+ cval->mixer->chip->usb_id == USB_ID(0x0763, 0x2030)) ?
get_ctl_value_v1(cval, request, validx, value_ret) :
get_ctl_value_v2(cval, request, validx, value_ret);
}
@@ -419,7 +420,8 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
unsigned char buf[2];
int val_len, err, timeout = 10;
- if (cval->mixer->protocol == UAC_VERSION_1) {
+ if (cval->mixer->protocol == UAC_VERSION_1 ||
+ cval->mixer->chip->usb_id == USB_ID(0x0763, 0x2030)) {
val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
} else { /* UAC_VERSION_2 */
/* audio class v2 controls are always 2 bytes in size */
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-05-04 8:26 ` Felix Homann
@ 2012-05-04 22:42 ` Chris Cavey
2012-05-05 7:05 ` Felix Homann
0 siblings, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-05-04 22:42 UTC (permalink / raw)
To: Felix Homann; +Cc: Grant Diffey, alsa-devel
No change. According to usbmon looks like no matter what channel I
adjust, the clock ctl is always being adjusted as if the wrong wIndex
gets selected. The clock wIndex is 0x8001 but the mixer volume is
0x4001. The wValue looks correct (first mixer, according to my docs,
should be 0x0100). I'm going to trace down the rabbit hole to learn how
wValue/wIndex is derived from the mixer controls.
I'll keep tinkering. At some point I should probably just buy you a
C400, probably easier.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-05-04 22:42 ` Chris Cavey
@ 2012-05-05 7:05 ` Felix Homann
2012-05-09 1:11 ` Chris Cavey
0 siblings, 1 reply; 30+ messages in thread
From: Felix Homann @ 2012-05-05 7:05 UTC (permalink / raw)
To: chris-alsa; +Cc: Grant Diffey, alsa-devel
Hi again,
2012/5/5 Chris Cavey <chris-alsa@rauros.net>:
> No change.
Hmm, do you still get this message:
ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x101,
wIndex = 0x4001, type = 4
ALSA mixer.c:877 64:1: cannot get min/max values for control 1 (id 64)
If so, can you please look at mixer.c 352 if line 352 corresponds to
get_ctl_value_v2? (My line numbers are a bit off compared to yours it
seems). Can you send some Ci lines from usbmon from before the
mesasage appears.
> According to usbmon looks like no matter what channel I adjust,
> the clock ctl is always being adjusted as if the wrong wIndex gets selected.
> The clock wIndex is 0x8001 but the mixer volume is 0x4001. The wValue looks
> correct (first mixer, according to my docs, should be 0x0100).
That's strange. Can you try if your "return 0" instead of "break" in
the device parsing is still needed now that we have a mixer quirk?
(Just a blind guess...)
> I'm going to
> trace down the rabbit hole to learn how wValue/wIndex is derived from the
> mixer controls.
Just compare with the FTUs controls.
>
> I'll keep tinkering. At some point I should probably just buy you a C400,
> probably easier.
Have you thought about switching to a MOTU or RME device? Maybe we
should work on these ;-)
Kind regards,
Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-05-05 7:05 ` Felix Homann
@ 2012-05-09 1:11 ` Chris Cavey
2012-05-09 8:33 ` Felix Homann
0 siblings, 1 reply; 30+ messages in thread
From: Chris Cavey @ 2012-05-09 1:11 UTC (permalink / raw)
To: Felix Homann; +Cc: Grant Diffey, alsa-devel
I do not get that message anymore.
Fixing the "return 0" back to "break" results in the device not even
registering, back to the -5 error from the beginning of this thread.
I'll capture more and get back to you.
The following derails the thread a bit:
As far as switching devices, I'm open. Due to a bug with a PCIE-PCI
bridge on my mainboard, I cannot use any PCI devices (I've got a Delta44
collecting dust). I really just want to find a single device, USB or
Firewire (or PCIE), which works flawlessly in both Windows and Linux.
Instrument/Mic input as well as independent balanced out and headphones.
Any thoughts on this?
On 5/5/2012 3:05 AM, Felix Homann wrote:
> Hi again,
>
> 2012/5/5 Chris Cavey<chris-alsa@rauros.net>:
>> No change.
>
> Hmm, do you still get this message:
>
> ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x101,
> wIndex = 0x4001, type = 4
> ALSA mixer.c:877 64:1: cannot get min/max values for control 1 (id 64)
>
> If so, can you please look at mixer.c 352 if line 352 corresponds to
> get_ctl_value_v2? (My line numbers are a bit off compared to yours it
> seems). Can you send some Ci lines from usbmon from before the
> mesasage appears.
>
>
>> According to usbmon looks like no matter what channel I adjust,
>> the clock ctl is always being adjusted as if the wrong wIndex gets selected.
>> The clock wIndex is 0x8001 but the mixer volume is 0x4001. The wValue looks
>> correct (first mixer, according to my docs, should be 0x0100).
>
> That's strange. Can you try if your "return 0" instead of "break" in
> the device parsing is still needed now that we have a mixer quirk?
> (Just a blind guess...)
>
>
>> I'm going to
>> trace down the rabbit hole to learn how wValue/wIndex is derived from the
>> mixer controls.
>
> Just compare with the FTUs controls.
>
>>
>> I'll keep tinkering. At some point I should probably just buy you a C400,
>> probably easier.
>
> Have you thought about switching to a MOTU or RME device? Maybe we
> should work on these ;-)
>
> Kind regards,
>
> Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-05-09 1:11 ` Chris Cavey
@ 2012-05-09 8:33 ` Felix Homann
0 siblings, 0 replies; 30+ messages in thread
From: Felix Homann @ 2012-05-09 8:33 UTC (permalink / raw)
To: chris-alsa; +Cc: Grant Diffey, alsa-devel
Hi again,
2012/5/9 Chris Cavey <chris-alsa@rauros.net>:
> I do not get that message anymore.
That's good.
Could you please send me the contents of your
/proc/asound/[YOUR_DEVICE]/usbmixer.
BTW, you could try to experiment a bit with volume quirks: See,
mixer.c search for 2081 to see how it's done for some of the FTU
controls. The volume controls for the FTU are reported in usbmixer to
range from -32768 to 0.
>
> Fixing the "return 0" back to "break" results in the device not even
> registering, back to the -5 error from the beginning of this thread.
OK, it was just a blind guess as I said.
> I really just want to find a single device, USB or Firewire (or
> PCIE), which works flawlessly in both Windows and Linux. Instrument/Mic
> input as well as independent balanced out and headphones.
>
> Any thoughts on this?
I was just joking when I mentioned the MOTUs and RMEs ;-) I would
certainly enjoy getting a MOTU Ultralite mk3 hybrid or a RME Babyface
to play around with and personally I will never buy a M-Audio device
again.
But while I'm quite confident that we can get the C400 working (might
take some time though) I don't know wether or not the MOTUs and RMEs
do behave in any way like UAC1/2 devices at all. I haven't seen a
single report on them, yet.
Regards,
Felix
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: M-Audio FastTrack C400
2012-04-18 1:12 ` Grant Diffey
2012-04-18 7:26 ` Clemens Ladisch
@ 2012-08-18 17:47 ` Mudwalker
1 sibling, 0 replies; 30+ messages in thread
From: Mudwalker @ 2012-08-18 17:47 UTC (permalink / raw)
To: alsa-devel
Hi. My name is Luke. I have the c400 and ubuntu. I know nothing about
programing. Does anyone have the c400 up and running on ubuntu? Help and/or
advice apreciated.
Luke
^ permalink raw reply [flat|nested] 30+ messages in thread
* M-Audio FastTrack C400
@ 2012-11-02 16:11 Raphael Souza
0 siblings, 0 replies; 30+ messages in thread
From: Raphael Souza @ 2012-11-02 16:11 UTC (permalink / raw)
To: alsa-devel
Hello, first of all, i want to thank you for the attention. It's necessary
good support recording with Ubuntu, and you do so well.
So, i have the M-Audio Fast Track C400 and i have installed on my computer
Ubuntu 12.04 LTS (Precise Pangolin). My system recognized the soundcard,
run JACK with it, but i can't record or hear any sound from there.
Which procedure i have to do?
Thank you again.
Best regards.
Raphael Fonseca
Sing-songwriter and Producer from Manaus, Brazil.
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2012-11-02 16:11 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-17 12:37 M-Audio FastTrack C400 Chris Cavey
[not found] ` <CACckToXF6yW+GzhzJ3zVBKi3e+thwrpDVnFmMCtjQOqePuixZg@mail.gmail.com>
[not found] ` <4F8DF29B.9090907@rauros.net>
2012-04-18 1:12 ` Grant Diffey
2012-04-18 7:26 ` Clemens Ladisch
2012-04-19 2:01 ` Chris Cavey
2012-04-19 7:58 ` Chris Cavey
2012-04-19 8:53 ` Clemens Ladisch
2012-04-19 10:26 ` Chris Cavey
2012-04-19 11:09 ` Grant Diffey
2012-04-19 11:19 ` Chris Cavey
[not found] ` <CACckToXHxm0y28ir+HGjE+Wug9PusHdrOeJpb3zQAFgQLjdP5w@mail.gmail.com>
2012-04-19 19:47 ` Chris Cavey
2012-04-20 7:54 ` Daniel Mack
2012-04-21 1:29 ` Chris Cavey
2012-04-21 8:10 ` Felix Homann
2012-04-21 8:48 ` Felix Homann
2012-04-21 9:19 ` Grant Diffey
2012-04-21 16:07 ` Chris Cavey
2012-04-29 3:09 ` Chris Cavey
2012-04-29 6:51 ` Felix Homann
2012-04-29 13:30 ` Chris Cavey
2012-05-02 10:05 ` Felix Homann
2012-05-02 20:44 ` Chris Cavey
2012-05-03 14:58 ` Felix Homann
2012-05-04 4:54 ` Chris Cavey
2012-05-04 8:26 ` Felix Homann
2012-05-04 22:42 ` Chris Cavey
2012-05-05 7:05 ` Felix Homann
2012-05-09 1:11 ` Chris Cavey
2012-05-09 8:33 ` Felix Homann
2012-08-18 17:47 ` Mudwalker
2012-11-02 16:11 Raphael Souza
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.