Ubuntu installation on omap

Ubuntu installation on omap

[Niamathullah sharief]

Hi,
   I am trying to install ubuntu on my beagleboard. i installed
successfully and it is booting fine. But after booting the graphics
which i get is not good. It has some graphics problem. And how can
work on ubuntu in board with my mouse and keyboard? If i insert mouse
and keyboard to board it is not working. only my serial port is
working. just i am getting login screen in my monitor.Please help me.

Re: Ubuntu installation on omap

[Niamathullah sharief]

I followed thid only. In that i have this doubts

On Tue, Feb 9, 2010 at 3:24 PM, Jochen Terbeck <jterbeck@ela-soft.com> wrote:
> See http://www.elinux.org/BeagleBoardUbuntu
>
>
> Niamathullah sharief schrieb:
>> Hi,
>>    I am trying to install ubuntu on my beagleboard. i installed
>> successfully and it is booting fine. But after booting the graphics
>> which i get is not good. It has some graphics problem. And how can
>> work on ubuntu in board with my mouse and keyboard? If i insert mouse
>> and keyboard to board it is not working. only my serial port is
>> working. just i am getting login screen in my monitor.Please help me.
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Ubuntu installation on omap

[Robert Nelson]

On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com> wrote:
> Hi,
>   I am trying to install ubuntu on my beagleboard. i installed
> successfully and it is booting fine. But after booting the graphics
> which i get is not good. It has some graphics problem.

Ahh, what kind of graphic problems?

> And how can
> work on ubuntu in board with my mouse and keyboard? If i insert mouse
> and keyboard to board it is not working. only my serial port is
> working. just i am getting login screen in my monitor.Please help me.

Are you using a certified USB 2.0 Hub?  Kernel version?

As a quick verification test, use one of my demo images listed here:

http://elinux.org/BeagleBoardUbuntu#Demo_Image

Which have been tested on multiple Beagles (Bx's,Cx's..)

Regards,
-- 
Robert Nelson
http://www.rcn-ee.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Ubuntu installation on omap

[Niamathullah sharief]

On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com> wrote:
> On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com> wrote:
>> Hi,
>>   I am trying to install ubuntu on my beagleboard. i installed
>> successfully and it is booting fine. But after booting the graphics
>> which i get is not good. It has some graphics problem.
>
> Ahh, what kind of graphic problems?
it is like working without graphics driver
>
>> And how can
>> work on ubuntu in board with my mouse and keyboard? If i insert mouse
>> and keyboard to board it is not working. only my serial port is
>> working. just i am getting login screen in my monitor.Please help me.
>
> Are you using a certified USB 2.0 Hub?  Kernel version?
Yes i am using perfect. If i give lsmod in serial, i am not not
getting anything. no modules running
>
> As a quick verification test, use one of my demo images listed here:
>
> http://elinux.org/BeagleBoardUbuntu#Demo_Image
>
> Which have been tested on multiple Beagles (Bx's,Cx's..)
>
> Regards,
> --
> Robert Nelson
> http://www.rcn-ee.com/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: Ubuntu installation on omap

[Menon, Nishanth]

> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-
> owner@vger.kernel.org] On Behalf Of Niamathullah sharief
> Sent: Wednesday, February 10, 2010 7:30 AM
> 
> On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com>
> wrote:
> > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com>
> wrote:
> >> Hi,
> >>   I am trying to install ubuntu on my beagleboard. i installed
> >> successfully and it is booting fine. But after booting the graphics
> >> which i get is not good. It has some graphics problem.
> >
> > Ahh, what kind of graphic problems?
> it is like working without graphics driver
Is'nt http://groups.google.com/group/beagleboard/ having more folks
Who can specifically help on beagleboard? Could we take the discussion 
there?

Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Ubuntu installation on omap

[Niamathullah sharief]

Now i have the new problem. My env has changed and my uImage is not booting. see
reading uImage

3610172 bytes read
## Booting kernel from Legacy Image at 80000000 ...
  Image Name:   2.6.32.7-x7.1
  Image Type:   ARM Linux Kernel Image (uncompressed)
  Data Size:    3610108 Bytes =  3.4 MB
  Load Address: 80008000
  Entry Point:  80008000
  Verifying Checksum ... OK
  Loading Kernel Image ... OK
OK

Starting kernel ...

After this it is not going. I followed the link
http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create
the uImage. whether my env setting are correct? i mean "## Booting
kernel from Legacy Image at 80000000 ..." is correct when i followed
the above link to create uImage?

On Wed, Feb 10, 2010 at 6:04 PM, Niamathullah sharief <omapsha@gmail.com> wrote:
>
> Now i have the new problem. My env has changed and my uImage is not booting. see
> reading uImage
>
>> 3610172 bytes read
>>
>> ## Booting kernel from Legacy Image at 80000000 ...
>>
>>   Image Name:   2.6.32.7-x7.1
>>
>>   Image Type:   ARM Linux Kernel Image (uncompressed)
>>
>>   Data Size:    3610108 Bytes =  3.4 MB
>>
>>   Load Address: 80008000
>>
>>   Entry Point:  80008000
>>
>>   Verifying Checksum ... OK
>>
>>   Loading Kernel Image ... OK
>>
>> OK
>>
>> Starting kernel ...
>
> After this it is not going. I followed the link http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create the uImage. whether my env setting are correct? i mean "## Booting kernel from Legacy Image at 80000000 ..." is correct when i followed the above link to create uImage?
>
>
> On Wed, Feb 10, 2010 at 11:20 AM, Menon, Nishanth <nm@ti.com> wrote:
> >> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-
> >> owner@vger.kernel.org] On Behalf Of Niamathullah sharief
> >> Sent: Wednesday, February 10, 2010 7:30 AM
> >>
> >> On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com>
> >> wrote:
> >> > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com>
> >> wrote:
> >> >> Hi,
> >> >>   I am trying to install ubuntu on my beagleboard. i installed
> >> >> successfully and it is booting fine. But after booting the graphics
> >> >> which i get is not good. It has some graphics problem.
> >> >
> >> > Ahh, what kind of graphic problems?
> >> it is like working without graphics driver
> > Is'nt http://groups.google.com/group/beagleboard/ having more folks
> > Who can specifically help on beagleboard? Could we take the discussion
> > there?
> >
> > Regards,
> > Nishanth Menon
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Ubuntu installation on omap

[Niamathullah sharief]

sorry i followed this link to create uImage
"http://elinux.org/BeagleBoardUbuntu#Create_uImage_for_U-Boot" now
whether my "bootm" env is correct?

On Wed, Feb 10, 2010 at 6:05 PM, Niamathullah sharief <omapsha@gmail.com> wrote:
> Now i have the new problem. My env has changed and my uImage is not booting. see
> reading uImage
>
> 3610172 bytes read
> ## Booting kernel from Legacy Image at 80000000 ...
>  Image Name:   2.6.32.7-x7.1
>  Image Type:   ARM Linux Kernel Image (uncompressed)
>  Data Size:    3610108 Bytes =  3.4 MB
>  Load Address: 80008000
>  Entry Point:  80008000
>  Verifying Checksum ... OK
>  Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> After this it is not going. I followed the link
> http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create
> the uImage. whether my env setting are correct? i mean "## Booting
> kernel from Legacy Image at 80000000 ..." is correct when i followed
> the above link to create uImage?
>
> On Wed, Feb 10, 2010 at 6:04 PM, Niamathullah sharief <omapsha@gmail.com> wrote:
>>
>> Now i have the new problem. My env has changed and my uImage is not booting. see
>> reading uImage
>>
>>> 3610172 bytes read
>>>
>>> ## Booting kernel from Legacy Image at 80000000 ...
>>>
>>>   Image Name:   2.6.32.7-x7.1
>>>
>>>   Image Type:   ARM Linux Kernel Image (uncompressed)
>>>
>>>   Data Size:    3610108 Bytes =  3.4 MB
>>>
>>>   Load Address: 80008000
>>>
>>>   Entry Point:  80008000
>>>
>>>   Verifying Checksum ... OK
>>>
>>>   Loading Kernel Image ... OK
>>>
>>> OK
>>>
>>> Starting kernel ...
>>
>> After this it is not going. I followed the link http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create the uImage. whether my env setting are correct? i mean "## Booting kernel from Legacy Image at 80000000 ..." is correct when i followed the above link to create uImage?
>>
>>
>> On Wed, Feb 10, 2010 at 11:20 AM, Menon, Nishanth <nm@ti.com> wrote:
>> >> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-
>> >> owner@vger.kernel.org] On Behalf Of Niamathullah sharief
>> >> Sent: Wednesday, February 10, 2010 7:30 AM
>> >>
>> >> On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com>
>> >> wrote:
>> >> > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com>
>> >> wrote:
>> >> >> Hi,
>> >> >>   I am trying to install ubuntu on my beagleboard. i installed
>> >> >> successfully and it is booting fine. But after booting the graphics
>> >> >> which i get is not good. It has some graphics problem.
>> >> >
>> >> > Ahh, what kind of graphic problems?
>> >> it is like working without graphics driver
>> > Is'nt http://groups.google.com/group/beagleboard/ having more folks
>> > Who can specifically help on beagleboard? Could we take the discussion
>> > there?
>> >
>> > Regards,
>> > Nishanth Menon
>> >
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Ubuntu installation on omap

[Niamathullah sharief]

still i am getting my kernel booting
i am using "bootcmd=mmcinit;fatload mmc 0:1 0x80000000 uImage;bootm
0x80000000". But i am creating uImage using "mkimage -A arm -O linux
-T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d
./vmlinuz-* ./uImage"
is this ok?i think the problem might be here. Please help me

On Wed, Feb 10, 2010 at 6:08 PM, Niamathullah sharief <omapsha@gmail.com> wrote:
> sorry i followed this link to create uImage
> "http://elinux.org/BeagleBoardUbuntu#Create_uImage_for_U-Boot" now
> whether my "bootm" env is correct?
>
> On Wed, Feb 10, 2010 at 6:05 PM, Niamathullah sharief <omapsha@gmail.com> wrote:
>> Now i have the new problem. My env has changed and my uImage is not booting. see
>> reading uImage
>>
>> 3610172 bytes read
>> ## Booting kernel from Legacy Image at 80000000 ...
>>  Image Name:   2.6.32.7-x7.1
>>  Image Type:   ARM Linux Kernel Image (uncompressed)
>>  Data Size:    3610108 Bytes =  3.4 MB
>>  Load Address: 80008000
>>  Entry Point:  80008000
>>  Verifying Checksum ... OK
>>  Loading Kernel Image ... OK
>> OK
>>
>> Starting kernel ...
>>
>> After this it is not going. I followed the link
>> http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create
>> the uImage. whether my env setting are correct? i mean "## Booting
>> kernel from Legacy Image at 80000000 ..." is correct when i followed
>> the above link to create uImage?
>>
>> On Wed, Feb 10, 2010 at 6:04 PM, Niamathullah sharief <omapsha@gmail.com> wrote:
>>>
>>> Now i have the new problem. My env has changed and my uImage is not booting. see
>>> reading uImage
>>>
>>>> 3610172 bytes read
>>>>
>>>> ## Booting kernel from Legacy Image at 80000000 ...
>>>>
>>>>   Image Name:   2.6.32.7-x7.1
>>>>
>>>>   Image Type:   ARM Linux Kernel Image (uncompressed)
>>>>
>>>>   Data Size:    3610108 Bytes =  3.4 MB
>>>>
>>>>   Load Address: 80008000
>>>>
>>>>   Entry Point:  80008000
>>>>
>>>>   Verifying Checksum ... OK
>>>>
>>>>   Loading Kernel Image ... OK
>>>>
>>>> OK
>>>>
>>>> Starting kernel ...
>>>
>>> After this it is not going. I followed the link http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create the uImage. whether my env setting are correct? i mean "## Booting kernel from Legacy Image at 80000000 ..." is correct when i followed the above link to create uImage?
>>>
>>>
>>> On Wed, Feb 10, 2010 at 11:20 AM, Menon, Nishanth <nm@ti.com> wrote:
>>> >> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-
>>> >> owner@vger.kernel.org] On Behalf Of Niamathullah sharief
>>> >> Sent: Wednesday, February 10, 2010 7:30 AM
>>> >>
>>> >> On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com>
>>> >> wrote:
>>> >> > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com>
>>> >> wrote:
>>> >> >> Hi,
>>> >> >>   I am trying to install ubuntu on my beagleboard. i installed
>>> >> >> successfully and it is booting fine. But after booting the graphics
>>> >> >> which i get is not good. It has some graphics problem.
>>> >> >
>>> >> > Ahh, what kind of graphic problems?
>>> >> it is like working without graphics driver
>>> > Is'nt http://groups.google.com/group/beagleboard/ having more folks
>>> > Who can specifically help on beagleboard? Could we take the discussion
>>> > there?
>>> >
>>> > Regards,
>>> > Nishanth Menon
>>> >
>>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Ubuntu installation on omap

[Robert Nelson]

On Wed, Feb 10, 2010 at 8:33 AM, Niamathullah sharief <omapsha@gmail.com> wrote:
> still i am getting my kernel booting
> i am using "bootcmd=mmcinit;fatload mmc 0:1 0x80000000 uImage;bootm
> 0x80000000". But i am creating uImage using "mkimage -A arm -O linux
> -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d
> ./vmlinuz-* ./uImage"
> is this ok?i think the problem might be here. Please help me

this is kinda offtopic for this list, you should really use:
http://groups.google.com/group/beagleboard

heads up: 'mmcinit' was depreciated in later uboot's as it's now 'mmc init'

For the beagle most use: 0x80300000 instead of 0x80000000  but it should boot..

Could you pastebin.com your complete boot log from the serial port, so
we could see what's actually going wrong?

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/