* Ubuntu installation on omap
@ 2010-02-09 9:41 Niamathullah sharief
[not found] ` <4B7130E8.1060703@ela-soft.com>
2010-02-09 15:07 ` Robert Nelson
0 siblings, 2 replies; 9+ messages in thread
From: Niamathullah sharief @ 2010-02-09 9:41 UTC (permalink / raw)
To: linux-omap
Hi,
I am trying to install ubuntu on my beagleboard. i installed
successfully and it is booting fine. But after booting the graphics
which i get is not good. It has some graphics problem. And how can
work on ubuntu in board with my mouse and keyboard? If i insert mouse
and keyboard to board it is not working. only my serial port is
working. just i am getting login screen in my monitor.Please help me.
^ permalink raw reply [flat|nested] 9+ messages in thread[parent not found: <4B7130E8.1060703@ela-soft.com>]
* Re: Ubuntu installation on omap [not found] ` <4B7130E8.1060703@ela-soft.com> @ 2010-02-09 10:43 ` Niamathullah sharief 0 siblings, 0 replies; 9+ messages in thread From: Niamathullah sharief @ 2010-02-09 10:43 UTC (permalink / raw) To: Jochen Terbeck; +Cc: linux-omap I followed thid only. In that i have this doubts On Tue, Feb 9, 2010 at 3:24 PM, Jochen Terbeck <jterbeck@ela-soft.com> wrote: > See http://www.elinux.org/BeagleBoardUbuntu > > > Niamathullah sharief schrieb: >> Hi, >> I am trying to install ubuntu on my beagleboard. i installed >> successfully and it is booting fine. But after booting the graphics >> which i get is not good. It has some graphics problem. And how can >> work on ubuntu in board with my mouse and keyboard? If i insert mouse >> and keyboard to board it is not working. only my serial port is >> working. just i am getting login screen in my monitor.Please help me. >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Ubuntu installation on omap 2010-02-09 9:41 Ubuntu installation on omap Niamathullah sharief [not found] ` <4B7130E8.1060703@ela-soft.com> @ 2010-02-09 15:07 ` Robert Nelson 2010-02-10 5:30 ` Niamathullah sharief 1 sibling, 1 reply; 9+ messages in thread From: Robert Nelson @ 2010-02-09 15:07 UTC (permalink / raw) To: Niamathullah sharief; +Cc: linux-omap On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com> wrote: > Hi, > I am trying to install ubuntu on my beagleboard. i installed > successfully and it is booting fine. But after booting the graphics > which i get is not good. It has some graphics problem. Ahh, what kind of graphic problems? > And how can > work on ubuntu in board with my mouse and keyboard? If i insert mouse > and keyboard to board it is not working. only my serial port is > working. just i am getting login screen in my monitor.Please help me. Are you using a certified USB 2.0 Hub? Kernel version? As a quick verification test, use one of my demo images listed here: http://elinux.org/BeagleBoardUbuntu#Demo_Image Which have been tested on multiple Beagles (Bx's,Cx's..) Regards, -- Robert Nelson http://www.rcn-ee.com/ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Ubuntu installation on omap 2010-02-09 15:07 ` Robert Nelson @ 2010-02-10 5:30 ` Niamathullah sharief 2010-02-10 5:50 ` Menon, Nishanth 0 siblings, 1 reply; 9+ messages in thread From: Niamathullah sharief @ 2010-02-10 5:30 UTC (permalink / raw) To: Robert Nelson; +Cc: linux-omap On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com> wrote: > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com> wrote: >> Hi, >> I am trying to install ubuntu on my beagleboard. i installed >> successfully and it is booting fine. But after booting the graphics >> which i get is not good. It has some graphics problem. > > Ahh, what kind of graphic problems? it is like working without graphics driver > >> And how can >> work on ubuntu in board with my mouse and keyboard? If i insert mouse >> and keyboard to board it is not working. only my serial port is >> working. just i am getting login screen in my monitor.Please help me. > > Are you using a certified USB 2.0 Hub? Kernel version? Yes i am using perfect. If i give lsmod in serial, i am not not getting anything. no modules running > > As a quick verification test, use one of my demo images listed here: > > http://elinux.org/BeagleBoardUbuntu#Demo_Image > > Which have been tested on multiple Beagles (Bx's,Cx's..) > > Regards, > -- > Robert Nelson > http://www.rcn-ee.com/ > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: Ubuntu installation on omap 2010-02-10 5:30 ` Niamathullah sharief @ 2010-02-10 5:50 ` Menon, Nishanth [not found] ` <4ad3b6301002100434n74910f7csf736b92f957f4555@mail.gmail.com> 0 siblings, 1 reply; 9+ messages in thread From: Menon, Nishanth @ 2010-02-10 5:50 UTC (permalink / raw) To: Niamathullah sharief, Robert Nelson; +Cc: linux-omap > From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- > owner@vger.kernel.org] On Behalf Of Niamathullah sharief > Sent: Wednesday, February 10, 2010 7:30 AM > > On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com> > wrote: > > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com> > wrote: > >> Hi, > >> I am trying to install ubuntu on my beagleboard. i installed > >> successfully and it is booting fine. But after booting the graphics > >> which i get is not good. It has some graphics problem. > > > > Ahh, what kind of graphic problems? > it is like working without graphics driver Is'nt http://groups.google.com/group/beagleboard/ having more folks Who can specifically help on beagleboard? Could we take the discussion there? Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <4ad3b6301002100434n74910f7csf736b92f957f4555@mail.gmail.com>]
* Re: Ubuntu installation on omap [not found] ` <4ad3b6301002100434n74910f7csf736b92f957f4555@mail.gmail.com> @ 2010-02-10 12:35 ` Niamathullah sharief 2010-02-10 12:38 ` Niamathullah sharief 0 siblings, 1 reply; 9+ messages in thread From: Niamathullah sharief @ 2010-02-10 12:35 UTC (permalink / raw) To: Menon, Nishanth; +Cc: Robert Nelson, linux-omap Now i have the new problem. My env has changed and my uImage is not booting. see reading uImage 3610172 bytes read ## Booting kernel from Legacy Image at 80000000 ... Image Name: 2.6.32.7-x7.1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3610108 Bytes = 3.4 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... After this it is not going. I followed the link http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create the uImage. whether my env setting are correct? i mean "## Booting kernel from Legacy Image at 80000000 ..." is correct when i followed the above link to create uImage? On Wed, Feb 10, 2010 at 6:04 PM, Niamathullah sharief <omapsha@gmail.com> wrote: > > Now i have the new problem. My env has changed and my uImage is not booting. see > reading uImage > >> 3610172 bytes read >> >> ## Booting kernel from Legacy Image at 80000000 ... >> >> Image Name: 2.6.32.7-x7.1 >> >> Image Type: ARM Linux Kernel Image (uncompressed) >> >> Data Size: 3610108 Bytes = 3.4 MB >> >> Load Address: 80008000 >> >> Entry Point: 80008000 >> >> Verifying Checksum ... OK >> >> Loading Kernel Image ... OK >> >> OK >> >> Starting kernel ... > > After this it is not going. I followed the link http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create the uImage. whether my env setting are correct? i mean "## Booting kernel from Legacy Image at 80000000 ..." is correct when i followed the above link to create uImage? > > > On Wed, Feb 10, 2010 at 11:20 AM, Menon, Nishanth <nm@ti.com> wrote: > >> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- > >> owner@vger.kernel.org] On Behalf Of Niamathullah sharief > >> Sent: Wednesday, February 10, 2010 7:30 AM > >> > >> On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com> > >> wrote: > >> > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com> > >> wrote: > >> >> Hi, > >> >> I am trying to install ubuntu on my beagleboard. i installed > >> >> successfully and it is booting fine. But after booting the graphics > >> >> which i get is not good. It has some graphics problem. > >> > > >> > Ahh, what kind of graphic problems? > >> it is like working without graphics driver > > Is'nt http://groups.google.com/group/beagleboard/ having more folks > > Who can specifically help on beagleboard? Could we take the discussion > > there? > > > > Regards, > > Nishanth Menon > > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Ubuntu installation on omap 2010-02-10 12:35 ` Niamathullah sharief @ 2010-02-10 12:38 ` Niamathullah sharief 2010-02-10 14:33 ` Niamathullah sharief 0 siblings, 1 reply; 9+ messages in thread From: Niamathullah sharief @ 2010-02-10 12:38 UTC (permalink / raw) To: Menon, Nishanth; +Cc: Robert Nelson, linux-omap sorry i followed this link to create uImage "http://elinux.org/BeagleBoardUbuntu#Create_uImage_for_U-Boot" now whether my "bootm" env is correct? On Wed, Feb 10, 2010 at 6:05 PM, Niamathullah sharief <omapsha@gmail.com> wrote: > Now i have the new problem. My env has changed and my uImage is not booting. see > reading uImage > > 3610172 bytes read > ## Booting kernel from Legacy Image at 80000000 ... > Image Name: 2.6.32.7-x7.1 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3610108 Bytes = 3.4 MB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... > > After this it is not going. I followed the link > http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create > the uImage. whether my env setting are correct? i mean "## Booting > kernel from Legacy Image at 80000000 ..." is correct when i followed > the above link to create uImage? > > On Wed, Feb 10, 2010 at 6:04 PM, Niamathullah sharief <omapsha@gmail.com> wrote: >> >> Now i have the new problem. My env has changed and my uImage is not booting. see >> reading uImage >> >>> 3610172 bytes read >>> >>> ## Booting kernel from Legacy Image at 80000000 ... >>> >>> Image Name: 2.6.32.7-x7.1 >>> >>> Image Type: ARM Linux Kernel Image (uncompressed) >>> >>> Data Size: 3610108 Bytes = 3.4 MB >>> >>> Load Address: 80008000 >>> >>> Entry Point: 80008000 >>> >>> Verifying Checksum ... OK >>> >>> Loading Kernel Image ... OK >>> >>> OK >>> >>> Starting kernel ... >> >> After this it is not going. I followed the link http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create the uImage. whether my env setting are correct? i mean "## Booting kernel from Legacy Image at 80000000 ..." is correct when i followed the above link to create uImage? >> >> >> On Wed, Feb 10, 2010 at 11:20 AM, Menon, Nishanth <nm@ti.com> wrote: >> >> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- >> >> owner@vger.kernel.org] On Behalf Of Niamathullah sharief >> >> Sent: Wednesday, February 10, 2010 7:30 AM >> >> >> >> On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com> >> >> wrote: >> >> > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com> >> >> wrote: >> >> >> Hi, >> >> >> I am trying to install ubuntu on my beagleboard. i installed >> >> >> successfully and it is booting fine. But after booting the graphics >> >> >> which i get is not good. It has some graphics problem. >> >> > >> >> > Ahh, what kind of graphic problems? >> >> it is like working without graphics driver >> > Is'nt http://groups.google.com/group/beagleboard/ having more folks >> > Who can specifically help on beagleboard? Could we take the discussion >> > there? >> > >> > Regards, >> > Nishanth Menon >> > >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Ubuntu installation on omap 2010-02-10 12:38 ` Niamathullah sharief @ 2010-02-10 14:33 ` Niamathullah sharief 2010-02-10 14:44 ` Robert Nelson 0 siblings, 1 reply; 9+ messages in thread From: Niamathullah sharief @ 2010-02-10 14:33 UTC (permalink / raw) To: Menon, Nishanth; +Cc: Robert Nelson, linux-omap still i am getting my kernel booting i am using "bootcmd=mmcinit;fatload mmc 0:1 0x80000000 uImage;bootm 0x80000000". But i am creating uImage using "mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./vmlinuz-* ./uImage" is this ok?i think the problem might be here. Please help me On Wed, Feb 10, 2010 at 6:08 PM, Niamathullah sharief <omapsha@gmail.com> wrote: > sorry i followed this link to create uImage > "http://elinux.org/BeagleBoardUbuntu#Create_uImage_for_U-Boot" now > whether my "bootm" env is correct? > > On Wed, Feb 10, 2010 at 6:05 PM, Niamathullah sharief <omapsha@gmail.com> wrote: >> Now i have the new problem. My env has changed and my uImage is not booting. see >> reading uImage >> >> 3610172 bytes read >> ## Booting kernel from Legacy Image at 80000000 ... >> Image Name: 2.6.32.7-x7.1 >> Image Type: ARM Linux Kernel Image (uncompressed) >> Data Size: 3610108 Bytes = 3.4 MB >> Load Address: 80008000 >> Entry Point: 80008000 >> Verifying Checksum ... OK >> Loading Kernel Image ... OK >> OK >> >> Starting kernel ... >> >> After this it is not going. I followed the link >> http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create >> the uImage. whether my env setting are correct? i mean "## Booting >> kernel from Legacy Image at 80000000 ..." is correct when i followed >> the above link to create uImage? >> >> On Wed, Feb 10, 2010 at 6:04 PM, Niamathullah sharief <omapsha@gmail.com> wrote: >>> >>> Now i have the new problem. My env has changed and my uImage is not booting. see >>> reading uImage >>> >>>> 3610172 bytes read >>>> >>>> ## Booting kernel from Legacy Image at 80000000 ... >>>> >>>> Image Name: 2.6.32.7-x7.1 >>>> >>>> Image Type: ARM Linux Kernel Image (uncompressed) >>>> >>>> Data Size: 3610108 Bytes = 3.4 MB >>>> >>>> Load Address: 80008000 >>>> >>>> Entry Point: 80008000 >>>> >>>> Verifying Checksum ... OK >>>> >>>> Loading Kernel Image ... OK >>>> >>>> OK >>>> >>>> Starting kernel ... >>> >>> After this it is not going. I followed the link http://elinux.org/BeagleBoardUbuntu#Create_U-Boot_boot_image to create the uImage. whether my env setting are correct? i mean "## Booting kernel from Legacy Image at 80000000 ..." is correct when i followed the above link to create uImage? >>> >>> >>> On Wed, Feb 10, 2010 at 11:20 AM, Menon, Nishanth <nm@ti.com> wrote: >>> >> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- >>> >> owner@vger.kernel.org] On Behalf Of Niamathullah sharief >>> >> Sent: Wednesday, February 10, 2010 7:30 AM >>> >> >>> >> On Tue, Feb 9, 2010 at 8:37 PM, Robert Nelson <robertcnelson@gmail.com> >>> >> wrote: >>> >> > On Tue, Feb 9, 2010 at 3:41 AM, Niamathullah sharief <omapsha@gmail.com> >>> >> wrote: >>> >> >> Hi, >>> >> >> I am trying to install ubuntu on my beagleboard. i installed >>> >> >> successfully and it is booting fine. But after booting the graphics >>> >> >> which i get is not good. It has some graphics problem. >>> >> > >>> >> > Ahh, what kind of graphic problems? >>> >> it is like working without graphics driver >>> > Is'nt http://groups.google.com/group/beagleboard/ having more folks >>> > Who can specifically help on beagleboard? Could we take the discussion >>> > there? >>> > >>> > Regards, >>> > Nishanth Menon >>> > >>> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Ubuntu installation on omap 2010-02-10 14:33 ` Niamathullah sharief @ 2010-02-10 14:44 ` Robert Nelson 0 siblings, 0 replies; 9+ messages in thread From: Robert Nelson @ 2010-02-10 14:44 UTC (permalink / raw) To: Niamathullah sharief; +Cc: linux-omap On Wed, Feb 10, 2010 at 8:33 AM, Niamathullah sharief <omapsha@gmail.com> wrote: > still i am getting my kernel booting > i am using "bootcmd=mmcinit;fatload mmc 0:1 0x80000000 uImage;bootm > 0x80000000". But i am creating uImage using "mkimage -A arm -O linux > -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d > ./vmlinuz-* ./uImage" > is this ok?i think the problem might be here. Please help me this is kinda offtopic for this list, you should really use: http://groups.google.com/group/beagleboard heads up: 'mmcinit' was depreciated in later uboot's as it's now 'mmc init' For the beagle most use: 0x80300000 instead of 0x80000000 but it should boot.. Could you pastebin.com your complete boot log from the serial port, so we could see what's actually going wrong? Regards, -- Robert Nelson http://www.rcn-ee.com/ ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-02-10 14:44 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-02-09 9:41 Ubuntu installation on omap Niamathullah sharief
[not found] ` <4B7130E8.1060703@ela-soft.com>
2010-02-09 10:43 ` Niamathullah sharief
2010-02-09 15:07 ` Robert Nelson
2010-02-10 5:30 ` Niamathullah sharief
2010-02-10 5:50 ` Menon, Nishanth
[not found] ` <4ad3b6301002100434n74910f7csf736b92f957f4555@mail.gmail.com>
2010-02-10 12:35 ` Niamathullah sharief
2010-02-10 12:38 ` Niamathullah sharief
2010-02-10 14:33 ` Niamathullah sharief
2010-02-10 14:44 ` Robert Nelson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.