* [linux-media] Strange behavior between Terratec Cinergy HD RTL2838 & Alfa AWUS036h RTL2870
@ 2013-01-23 10:16 didli
2013-01-23 15:26 ` Antti Palosaari
0 siblings, 1 reply; 2+ messages in thread
From: didli @ 2013-01-23 10:16 UTC (permalink / raw)
To: linux-media
Hi to u all !
I'm using Xubuntu 12.10, v4l latest media_build, with Alfa Network
AWUS036H (rtl2870) and a Terratec Cinergy HD (rtl2832).
These two cards works flawlessly, but not together : I need to
manually power off the Alfa Network card in order to get TV image with
the Terratec Cinergy HD.
If I use kaffeine or me-tv with AWUS036H power on, display is crappy
and scan with Terratec is almost impossible.
If I power off the AWUS036h usb card, everything with the Cinergy card
works as expected.
lsusb :
[code]
Bus 001 Device 002: ID 0ccd:00d3 TerraTec Electronic GmbH
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0ccd TerraTec Electronic GmbH
idProduct 0x00d3
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5
Bus 001 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187
Wireless Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x8187 RTL8187 Wireless Adapter
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 0 (Defined at Interface level)
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0[/code]
dmesg :
[code]
[45981.215807] i2c i2c-2: rtl2832: i2c rd failed=-110 reg=51 len=1
[45982.539669] i2c i2c-2: rtl2832: i2c rd failed=-110 reg=51 len=1
[45983.539751] i2c i2c-2: rtl2832: i2c rd failed=-110 reg=51 len=1
[45985.264752] usb_urb_complete: 269 callbacks suppressed
[45988.455662] i2c i2c-2: rtl2832: i2c rd failed=-110 reg=51 len=1
[45989.011363] i2c i2c-2: rtl2832: i2c wr failed=-32 reg=01 len=1
[45989.013075] i2c i2c-2: e4000: i2c wr failed=-32 reg=1a len=1
[45989.020746] i2c i2c-2: rtl2832: i2c wr failed=-32 reg=1c len=1
[45990.267531] usb_urb_complete: 730 callbacks suppressed
[45995.369950] usb_urb_complete: 988 callbacks suppressed
[46000.379616] usb_urb_complete: 2908 callbacks suppressed
[46005.383791] usb_urb_complete: 3790 callbacks suppressed
[46010.387969] usb_urb_complete: 3152 callbacks suppressed
[46015.392149] usb_urb_complete: 3790 callbacks suppressed
[46020.396057] usb_urb_complete: 3790 callbacks suppressed
[46025.400225] usb_urb_complete: 3790 callbacks suppressed
[46030.404399] usb_urb_complete: 3790 callbacks suppressed
[46035.408324] usb_urb_complete: 3790 callbacks suppressed
[46040.411231] usb_urb_complete: 3789 callbacks suppressed
[46045.415154] usb_urb_complete: 3790 callbacks suppressed
[46050.419447] usb_urb_complete: 3790 callbacks suppressed
[46055.423361] usb_urb_complete: 3790 callbacks suppressed
[46060.427535] usb_urb_complete: 3790 callbacks suppressed
[46065.431447] usb_urb_complete: 3790 callbacks suppressed
[46070.435627] usb_urb_complete: 3790 callbacks suppressed
[46075.439661] usb_urb_complete: 3790 callbacks suppressed
[46080.443713] usb_urb_complete: 3790 callbacks suppressed
[46085.447875] usb_urb_complete: 3790 callbacks suppressed
[46090.452049] usb_urb_complete: 3790 callbacks suppressed
[46095.454710] usb_urb_complete: 3789 callbacks suppressed
[46100.458881] usb_urb_complete: 3790 callbacks suppressed
[133177.263354] usb 1-1: new high-speed USB device number 11 using ehci_hcd
[133177.407784] usb 1-1: New USB device found, idVendor=0ccd, idProduct=00d3
[133177.407791] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[133177.407794] usb 1-1: Product: RTL2838UHIDIR
[133177.407796] usb 1-1: Manufacturer: Realtek
[133177.407799] usb 1-1: SerialNumber: 00000001
[133177.413632] usb 1-1: dvb_usb_v2: found a 'TerraTec Cinergy T Stick
RC (Rev. 3)' in warm state
[133177.480380] usb 1-1: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[133177.480409] DVB: registering new adapter (TerraTec Cinergy T Stick
RC (Rev. 3))
[133177.483575] usb 1-1: DVB: registering adapter 0 frontend 0
(Realtek RTL2832 (DVB-T))...
[133177.493415] i2c i2c-2: e4000: Elonics E4000 successfully identified
[133177.505594] Registered IR keymap rc-empty
[133177.505719] input: TerraTec Cinergy T Stick RC (Rev. 3) as
/devices/pci0000:00/0000:00:13.5/usb1/1-1/rc/rc1/input7
[133177.505866] rc1: TerraTec Cinergy T Stick RC (Rev. 3) as
/devices/pci0000:00/0000:00:13.5/usb1/1-1/rc/rc1
[133177.505873] usb 1-1: dvb_usb_v2: schedule remote query interval to 400 msecs
[133177.518320] usb 1-1: dvb_usb_v2: 'TerraTec Cinergy T Stick RC
(Rev. 3)' successfully initialized and connected
[/code]
Any idea to fix this behavior please ?
Thanks to u all !
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Didier LIMA | Mediaklan
Webdesign - Création Graphique - Identité Visuelle
Mobile : 06 516 04 992 - Tél. : 09 53 45 00 90
Mél. : mediaklan@gmail.com
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [linux-media] Strange behavior between Terratec Cinergy HD RTL2838 & Alfa AWUS036h RTL2870
2013-01-23 10:16 [linux-media] Strange behavior between Terratec Cinergy HD RTL2838 & Alfa AWUS036h RTL2870 didli
@ 2013-01-23 15:26 ` Antti Palosaari
0 siblings, 0 replies; 2+ messages in thread
From: Antti Palosaari @ 2013-01-23 15:26 UTC (permalink / raw)
To: didli; +Cc: linux-media
On 01/23/2013 12:16 PM, didli wrote:
> Hi to u all !
> I'm using Xubuntu 12.10, v4l latest media_build, with Alfa Network
> AWUS036H (rtl2870) and a Terratec Cinergy HD (rtl2832).
> These two cards works flawlessly, but not together : I need to
> manually power off the Alfa Network card in order to get TV image with
> the Terratec Cinergy HD.
> If I use kaffeine or me-tv with AWUS036H power on, display is crappy
> and scan with Terratec is almost impossible.
> If I power off the AWUS036h usb card, everything with the Cinergy card
> works as expected.
[...]
> [45981.215807] i2c i2c-2: rtl2832: i2c rd failed=-110 reg=51 len=1
> [45982.539669] i2c i2c-2: rtl2832: i2c rd failed=-110 reg=51 len=1
> [45983.539751] i2c i2c-2: rtl2832: i2c rd failed=-110 reg=51 len=1
> [45985.264752] usb_urb_complete: 269 callbacks suppressed
> [45988.455662] i2c i2c-2: rtl2832: i2c rd failed=-110 reg=51 len=1
> [45989.011363] i2c i2c-2: rtl2832: i2c wr failed=-32 reg=01 len=1
> [45989.013075] i2c i2c-2: e4000: i2c wr failed=-32 reg=1a len=1
> [45989.020746] i2c i2c-2: rtl2832: i2c wr failed=-32 reg=1c len=1
[...]
> Any idea to fix this behavior please ?
> Thanks to u all !
Sounds like USB host controller issue. What is USB controller (AMD SBxxx?)?
Easiest way to work around problem is to put these devices to USB port
that are under different USB HCI.
regards
Antti
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-01-23 15:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-01-23 10:16 [linux-media] Strange behavior between Terratec Cinergy HD RTL2838 & Alfa AWUS036h RTL2870 didli
2013-01-23 15:26 ` Antti Palosaari
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.