[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tero Kristo]

Hi,

Changes compared to v9:
- rebased on top of 3.13-rc1
- modified the low level clk register API to provide SoC specific clk_readl
  and clk_writel support which can be registered during boot, TI SoC variant
  uses regmap on low level
- dropped regmap parameter from clock init calls, instead a helper is used
  for getting regmap index along with the register offset from DT
- dropped regmap parameter from clock structs, instead platform specific
  clk_readl / clk_writel are used to parse reg parameter according to
  platform, for TI SoC:s, this is encoded as:
  struct clk_omap_reg {
    u16 offset; /* register offset */
    u16 index; /* regmap index */
  }
- Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
  tweak which I would actually want some feedback upon, basically the problem
  is I need to return status from the clk init functions so I can see if
  -EAGAIN is passed, in which case init will be retried later, maybe some of
  this can be made generic, like converting all the CLK_OF_DECLARE type
  functions to return status

Testing done:
- omap3-beagle : boot + suspend/resume
- omap3-beagle-xm : boot (thanks to Nishanth)
- omap4-panda-es : boot + suspend/resume
- omap5-uevm : boot
- dra7-evm : boot
- am335x-bone : boot

Separate branches available at https://github.com/t-kristo/linux-pm.git

- full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
- clk driver only: 3.13-rc1-dt-clks-v10-for-mike
- DT data only: 3.13-rc1-dt-clks-v10-for-benoit

-Tero

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tero Kristo]

Hi,

Changes compared to v9:
- rebased on top of 3.13-rc1
- modified the low level clk register API to provide SoC specific clk_readl
  and clk_writel support which can be registered during boot, TI SoC variant
  uses regmap on low level
- dropped regmap parameter from clock init calls, instead a helper is used
  for getting regmap index along with the register offset from DT
- dropped regmap parameter from clock structs, instead platform specific
  clk_readl / clk_writel are used to parse reg parameter according to
  platform, for TI SoC:s, this is encoded as:
  struct clk_omap_reg {
    u16 offset; /* register offset */
    u16 index; /* regmap index */
  }
- Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
  tweak which I would actually want some feedback upon, basically the problem
  is I need to return status from the clk init functions so I can see if
  -EAGAIN is passed, in which case init will be retried later, maybe some of
  this can be made generic, like converting all the CLK_OF_DECLARE type
  functions to return status

Testing done:
- omap3-beagle : boot + suspend/resume
- omap3-beagle-xm : boot (thanks to Nishanth)
- omap4-panda-es : boot + suspend/resume
- omap5-uevm : boot
- dra7-evm : boot
- am335x-bone : boot

Separate branches available at https://github.com/t-kristo/linux-pm.git

- full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
- clk driver only: 3.13-rc1-dt-clks-v10-for-mike
- DT data only: 3.13-rc1-dt-clks-v10-for-benoit

-Tero

[PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Tero Kristo]

Current clock wrappers assume simple and direct mapped hardware register
access. Improve this support by adding functionality for registering
platform specific clock I/O wrappers, which can be used to support
various features needed like endianess conversions, indexed regmap support,
etc. Default I/O wrapper provided also which uses the existing direct
I/O mapped behavior.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk.c            |   68 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk-provider.h |   15 +++++-----
 2 files changed, 75 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2cf2ea6..c331386 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -34,6 +34,74 @@ static HLIST_HEAD(clk_root_list);
 static HLIST_HEAD(clk_orphan_list);
 static LIST_HEAD(clk_notifier_list);
 
+/**
+ * clk_readl_default - default clock register read support function
+ * @reg: register to read
+ *
+ * Default implementation for reading a clock register.
+ */
+static u32 clk_readl_default(u32 __iomem *reg)
+{
+	return readl(reg);
+}
+
+/**
+ * clk_writel_default - default clock register write support function
+ * @val: value to write
+ * @reg: register to write to
+ *
+ * Default implementation for writing a clock register.
+ */
+static void clk_writel_default(u32 val, u32 __iomem *reg)
+{
+	writel(val, reg);
+}
+
+struct clk_reg_ops clk_reg_ops_default = {
+	.clk_readl = clk_readl_default,
+	.clk_writel = clk_writel_default
+};
+
+static struct clk_reg_ops *clk_reg_ops = &clk_reg_ops_default;
+
+/**
+ * clk_register_reg_ops - register access functions for clock registers
+ * @ops: register level ops
+ *
+ * Registers platform or SoC specific operations for reading / writing
+ * clock registers.
+ */
+int clk_register_reg_ops(struct clk_reg_ops *ops)
+{
+	if (!ops)
+		return -EINVAL;
+	clk_reg_ops = ops;
+	return 0;
+}
+
+/**
+ * clk_readl - read a clock register value from hardware
+ * @reg: register to read
+ *
+ * Uses the registered clk_reg_ops to read a hardware clock register value.
+ */
+u32 clk_readl(u32 __iomem *reg)
+{
+	return clk_reg_ops->clk_readl(reg);
+}
+
+/**
+ * clk_writel - write a clock register value to hardware
+ * @val: value to write
+ * @reg: register to write
+ *
+ * Uses the registered clk_reg_ops to write a hardware clock register value.
+ */
+void clk_writel(u32 val, u32 __iomem *reg)
+{
+	clk_reg_ops->clk_writel(val, reg);
+}
+
 /***           locking             ***/
 static void clk_prepare_lock(void)
 {
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7e59253..16e4df2 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -512,15 +512,14 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
  * for improved portability across platforms
  */
 
-static inline u32 clk_readl(u32 __iomem *reg)
-{
-	return readl(reg);
-}
+struct clk_reg_ops {
+	u32 (*clk_readl)(u32 __iomem *reg);
+	void (*clk_writel)(u32 val, u32 __iomem *reg);
+};
 
-static inline void clk_writel(u32 val, u32 __iomem *reg)
-{
-	writel(val, reg);
-}
+u32 clk_readl(u32 __iomem *reg);
+void clk_writel(u32 val, u32 __iomem *reg);
+int clk_register_reg_ops(struct clk_reg_ops *ops);
 
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PROVIDER_H */
-- 
1.7.9.5

[PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Tero Kristo]

Current clock wrappers assume simple and direct mapped hardware register
access. Improve this support by adding functionality for registering
platform specific clock I/O wrappers, which can be used to support
various features needed like endianess conversions, indexed regmap support,
etc. Default I/O wrapper provided also which uses the existing direct
I/O mapped behavior.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk.c            |   68 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk-provider.h |   15 +++++-----
 2 files changed, 75 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2cf2ea6..c331386 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -34,6 +34,74 @@ static HLIST_HEAD(clk_root_list);
 static HLIST_HEAD(clk_orphan_list);
 static LIST_HEAD(clk_notifier_list);
 
+/**
+ * clk_readl_default - default clock register read support function
+ * @reg: register to read
+ *
+ * Default implementation for reading a clock register.
+ */
+static u32 clk_readl_default(u32 __iomem *reg)
+{
+	return readl(reg);
+}
+
+/**
+ * clk_writel_default - default clock register write support function
+ * @val: value to write
+ * @reg: register to write to
+ *
+ * Default implementation for writing a clock register.
+ */
+static void clk_writel_default(u32 val, u32 __iomem *reg)
+{
+	writel(val, reg);
+}
+
+struct clk_reg_ops clk_reg_ops_default = {
+	.clk_readl = clk_readl_default,
+	.clk_writel = clk_writel_default
+};
+
+static struct clk_reg_ops *clk_reg_ops = &clk_reg_ops_default;
+
+/**
+ * clk_register_reg_ops - register access functions for clock registers
+ * @ops: register level ops
+ *
+ * Registers platform or SoC specific operations for reading / writing
+ * clock registers.
+ */
+int clk_register_reg_ops(struct clk_reg_ops *ops)
+{
+	if (!ops)
+		return -EINVAL;
+	clk_reg_ops = ops;
+	return 0;
+}
+
+/**
+ * clk_readl - read a clock register value from hardware
+ * @reg: register to read
+ *
+ * Uses the registered clk_reg_ops to read a hardware clock register value.
+ */
+u32 clk_readl(u32 __iomem *reg)
+{
+	return clk_reg_ops->clk_readl(reg);
+}
+
+/**
+ * clk_writel - write a clock register value to hardware
+ * @val: value to write
+ * @reg: register to write
+ *
+ * Uses the registered clk_reg_ops to write a hardware clock register value.
+ */
+void clk_writel(u32 val, u32 __iomem *reg)
+{
+	clk_reg_ops->clk_writel(val, reg);
+}
+
 /***           locking             ***/
 static void clk_prepare_lock(void)
 {
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7e59253..16e4df2 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -512,15 +512,14 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
  * for improved portability across platforms
  */
 
-static inline u32 clk_readl(u32 __iomem *reg)
-{
-	return readl(reg);
-}
+struct clk_reg_ops {
+	u32 (*clk_readl)(u32 __iomem *reg);
+	void (*clk_writel)(u32 val, u32 __iomem *reg);
+};
 
-static inline void clk_writel(u32 val, u32 __iomem *reg)
-{
-	writel(val, reg);
-}
+u32 clk_readl(u32 __iomem *reg);
+void clk_writel(u32 val, u32 __iomem *reg);
+int clk_register_reg_ops(struct clk_reg_ops *ops);
 
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PROVIDER_H */
-- 
1.7.9.5

Re: [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Mike Turquette]

Quoting Tero Kristo (2013-11-26 00:05:42)
> Current clock wrappers assume simple and direct mapped hardware register
> access. Improve this support by adding functionality for registering
> platform specific clock I/O wrappers, which can be used to support
> various features needed like endianess conversions, indexed regmap support,
> etc. Default I/O wrapper provided also which uses the existing direct
> I/O mapped behavior.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

There is a separate discussion on removing regmap for reading omap clk
registers. I guess this patch is not needed in that case?

Regards,
Mike

> ---
>  drivers/clk/clk.c            |   68 ++++++++++++++++++++++++++++++++++++++++++
>  include/linux/clk-provider.h |   15 +++++-----
>  2 files changed, 75 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 2cf2ea6..c331386 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -34,6 +34,74 @@ static HLIST_HEAD(clk_root_list);
>  static HLIST_HEAD(clk_orphan_list);
>  static LIST_HEAD(clk_notifier_list);
>  
> +/**
> + * clk_readl_default - default clock register read support function
> + * @reg: register to read
> + *
> + * Default implementation for reading a clock register.
> + */
> +static u32 clk_readl_default(u32 __iomem *reg)
> +{
> +       return readl(reg);
> +}
> +
> +/**
> + * clk_writel_default - default clock register write support function
> + * @val: value to write
> + * @reg: register to write to
> + *
> + * Default implementation for writing a clock register.
> + */
> +static void clk_writel_default(u32 val, u32 __iomem *reg)
> +{
> +       writel(val, reg);
> +}
> +
> +struct clk_reg_ops clk_reg_ops_default = {
> +       .clk_readl = clk_readl_default,
> +       .clk_writel = clk_writel_default
> +};
> +
> +static struct clk_reg_ops *clk_reg_ops = &clk_reg_ops_default;
> +
> +/**
> + * clk_register_reg_ops - register access functions for clock registers
> + * @ops: register level ops
> + *
> + * Registers platform or SoC specific operations for reading / writing
> + * clock registers.
> + */
> +int clk_register_reg_ops(struct clk_reg_ops *ops)
> +{
> +       if (!ops)
> +               return -EINVAL;
> +       clk_reg_ops = ops;
> +       return 0;
> +}
> +
> +/**
> + * clk_readl - read a clock register value from hardware
> + * @reg: register to read
> + *
> + * Uses the registered clk_reg_ops to read a hardware clock register value.
> + */
> +u32 clk_readl(u32 __iomem *reg)
> +{
> +       return clk_reg_ops->clk_readl(reg);
> +}
> +
> +/**
> + * clk_writel - write a clock register value to hardware
> + * @val: value to write
> + * @reg: register to write
> + *
> + * Uses the registered clk_reg_ops to write a hardware clock register value.
> + */
> +void clk_writel(u32 val, u32 __iomem *reg)
> +{
> +       clk_reg_ops->clk_writel(val, reg);
> +}
> +
>  /***           locking             ***/
>  static void clk_prepare_lock(void)
>  {
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 7e59253..16e4df2 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -512,15 +512,14 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
>   * for improved portability across platforms
>   */
>  
> -static inline u32 clk_readl(u32 __iomem *reg)
> -{
> -       return readl(reg);
> -}
> +struct clk_reg_ops {
> +       u32 (*clk_readl)(u32 __iomem *reg);
> +       void (*clk_writel)(u32 val, u32 __iomem *reg);
> +};
>  
> -static inline void clk_writel(u32 val, u32 __iomem *reg)
> -{
> -       writel(val, reg);
> -}
> +u32 clk_readl(u32 __iomem *reg);
> +void clk_writel(u32 val, u32 __iomem *reg);
> +int clk_register_reg_ops(struct clk_reg_ops *ops);
>  
>  #endif /* CONFIG_COMMON_CLK */
>  #endif /* CLK_PROVIDER_H */
> -- 
> 1.7.9.5
> 

[PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Mike Turquette]

Quoting Tero Kristo (2013-11-26 00:05:42)
> Current clock wrappers assume simple and direct mapped hardware register
> access. Improve this support by adding functionality for registering
> platform specific clock I/O wrappers, which can be used to support
> various features needed like endianess conversions, indexed regmap support,
> etc. Default I/O wrapper provided also which uses the existing direct
> I/O mapped behavior.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

There is a separate discussion on removing regmap for reading omap clk
registers. I guess this patch is not needed in that case?

Regards,
Mike

> ---
>  drivers/clk/clk.c            |   68 ++++++++++++++++++++++++++++++++++++++++++
>  include/linux/clk-provider.h |   15 +++++-----
>  2 files changed, 75 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 2cf2ea6..c331386 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -34,6 +34,74 @@ static HLIST_HEAD(clk_root_list);
>  static HLIST_HEAD(clk_orphan_list);
>  static LIST_HEAD(clk_notifier_list);
>  
> +/**
> + * clk_readl_default - default clock register read support function
> + * @reg: register to read
> + *
> + * Default implementation for reading a clock register.
> + */
> +static u32 clk_readl_default(u32 __iomem *reg)
> +{
> +       return readl(reg);
> +}
> +
> +/**
> + * clk_writel_default - default clock register write support function
> + * @val: value to write
> + * @reg: register to write to
> + *
> + * Default implementation for writing a clock register.
> + */
> +static void clk_writel_default(u32 val, u32 __iomem *reg)
> +{
> +       writel(val, reg);
> +}
> +
> +struct clk_reg_ops clk_reg_ops_default = {
> +       .clk_readl = clk_readl_default,
> +       .clk_writel = clk_writel_default
> +};
> +
> +static struct clk_reg_ops *clk_reg_ops = &clk_reg_ops_default;
> +
> +/**
> + * clk_register_reg_ops - register access functions for clock registers
> + * @ops: register level ops
> + *
> + * Registers platform or SoC specific operations for reading / writing
> + * clock registers.
> + */
> +int clk_register_reg_ops(struct clk_reg_ops *ops)
> +{
> +       if (!ops)
> +               return -EINVAL;
> +       clk_reg_ops = ops;
> +       return 0;
> +}
> +
> +/**
> + * clk_readl - read a clock register value from hardware
> + * @reg: register to read
> + *
> + * Uses the registered clk_reg_ops to read a hardware clock register value.
> + */
> +u32 clk_readl(u32 __iomem *reg)
> +{
> +       return clk_reg_ops->clk_readl(reg);
> +}
> +
> +/**
> + * clk_writel - write a clock register value to hardware
> + * @val: value to write
> + * @reg: register to write
> + *
> + * Uses the registered clk_reg_ops to write a hardware clock register value.
> + */
> +void clk_writel(u32 val, u32 __iomem *reg)
> +{
> +       clk_reg_ops->clk_writel(val, reg);
> +}
> +
>  /***           locking             ***/
>  static void clk_prepare_lock(void)
>  {
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 7e59253..16e4df2 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -512,15 +512,14 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
>   * for improved portability across platforms
>   */
>  
> -static inline u32 clk_readl(u32 __iomem *reg)
> -{
> -       return readl(reg);
> -}
> +struct clk_reg_ops {
> +       u32 (*clk_readl)(u32 __iomem *reg);
> +       void (*clk_writel)(u32 val, u32 __iomem *reg);
> +};
>  
> -static inline void clk_writel(u32 val, u32 __iomem *reg)
> -{
> -       writel(val, reg);
> -}
> +u32 clk_readl(u32 __iomem *reg);
> +void clk_writel(u32 val, u32 __iomem *reg);
> +int clk_register_reg_ops(struct clk_reg_ops *ops);
>  
>  #endif /* CONFIG_COMMON_CLK */
>  #endif /* CLK_PROVIDER_H */
> -- 
> 1.7.9.5
> 

Re: [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Tero Kristo]

On 12/15/2013 02:48 AM, Mike Turquette wrote:
> Quoting Tero Kristo (2013-11-26 00:05:42)
>> Current clock wrappers assume simple and direct mapped hardware register
>> access. Improve this support by adding functionality for registering
>> platform specific clock I/O wrappers, which can be used to support
>> various features needed like endianess conversions, indexed regmap support,
>> etc. Default I/O wrapper provided also which uses the existing direct
>> I/O mapped behavior.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>
> There is a separate discussion on removing regmap for reading omap clk
> registers. I guess this patch is not needed in that case?

Actually, this is still needed, as I need to map the clocks according to 
their parent nodes.

-Tero

>
> Regards,
> Mike
>
>> ---
>>   drivers/clk/clk.c            |   68 ++++++++++++++++++++++++++++++++++++++++++
>>   include/linux/clk-provider.h |   15 +++++-----
>>   2 files changed, 75 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
>> index 2cf2ea6..c331386 100644
>> --- a/drivers/clk/clk.c
>> +++ b/drivers/clk/clk.c
>> @@ -34,6 +34,74 @@ static HLIST_HEAD(clk_root_list);
>>   static HLIST_HEAD(clk_orphan_list);
>>   static LIST_HEAD(clk_notifier_list);
>>
>> +/**
>> + * clk_readl_default - default clock register read support function
>> + * @reg: register to read
>> + *
>> + * Default implementation for reading a clock register.
>> + */
>> +static u32 clk_readl_default(u32 __iomem *reg)
>> +{
>> +       return readl(reg);
>> +}
>> +
>> +/**
>> + * clk_writel_default - default clock register write support function
>> + * @val: value to write
>> + * @reg: register to write to
>> + *
>> + * Default implementation for writing a clock register.
>> + */
>> +static void clk_writel_default(u32 val, u32 __iomem *reg)
>> +{
>> +       writel(val, reg);
>> +}
>> +
>> +struct clk_reg_ops clk_reg_ops_default = {
>> +       .clk_readl = clk_readl_default,
>> +       .clk_writel = clk_writel_default
>> +};
>> +
>> +static struct clk_reg_ops *clk_reg_ops = &clk_reg_ops_default;
>> +
>> +/**
>> + * clk_register_reg_ops - register access functions for clock registers
>> + * @ops: register level ops
>> + *
>> + * Registers platform or SoC specific operations for reading / writing
>> + * clock registers.
>> + */
>> +int clk_register_reg_ops(struct clk_reg_ops *ops)
>> +{
>> +       if (!ops)
>> +               return -EINVAL;
>> +       clk_reg_ops = ops;
>> +       return 0;
>> +}
>> +
>> +/**
>> + * clk_readl - read a clock register value from hardware
>> + * @reg: register to read
>> + *
>> + * Uses the registered clk_reg_ops to read a hardware clock register value.
>> + */
>> +u32 clk_readl(u32 __iomem *reg)
>> +{
>> +       return clk_reg_ops->clk_readl(reg);
>> +}
>> +
>> +/**
>> + * clk_writel - write a clock register value to hardware
>> + * @val: value to write
>> + * @reg: register to write
>> + *
>> + * Uses the registered clk_reg_ops to write a hardware clock register value.
>> + */
>> +void clk_writel(u32 val, u32 __iomem *reg)
>> +{
>> +       clk_reg_ops->clk_writel(val, reg);
>> +}
>> +
>>   /***           locking             ***/
>>   static void clk_prepare_lock(void)
>>   {
>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>> index 7e59253..16e4df2 100644
>> --- a/include/linux/clk-provider.h
>> +++ b/include/linux/clk-provider.h
>> @@ -512,15 +512,14 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
>>    * for improved portability across platforms
>>    */
>>
>> -static inline u32 clk_readl(u32 __iomem *reg)
>> -{
>> -       return readl(reg);
>> -}
>> +struct clk_reg_ops {
>> +       u32 (*clk_readl)(u32 __iomem *reg);
>> +       void (*clk_writel)(u32 val, u32 __iomem *reg);
>> +};
>>
>> -static inline void clk_writel(u32 val, u32 __iomem *reg)
>> -{
>> -       writel(val, reg);
>> -}
>> +u32 clk_readl(u32 __iomem *reg);
>> +void clk_writel(u32 val, u32 __iomem *reg);
>> +int clk_register_reg_ops(struct clk_reg_ops *ops);
>>
>>   #endif /* CONFIG_COMMON_CLK */
>>   #endif /* CLK_PROVIDER_H */
>> --
>> 1.7.9.5
>>

[PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Tero Kristo]

On 12/15/2013 02:48 AM, Mike Turquette wrote:
> Quoting Tero Kristo (2013-11-26 00:05:42)
>> Current clock wrappers assume simple and direct mapped hardware register
>> access. Improve this support by adding functionality for registering
>> platform specific clock I/O wrappers, which can be used to support
>> various features needed like endianess conversions, indexed regmap support,
>> etc. Default I/O wrapper provided also which uses the existing direct
>> I/O mapped behavior.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>
> There is a separate discussion on removing regmap for reading omap clk
> registers. I guess this patch is not needed in that case?

Actually, this is still needed, as I need to map the clocks according to 
their parent nodes.

-Tero

>
> Regards,
> Mike
>
>> ---
>>   drivers/clk/clk.c            |   68 ++++++++++++++++++++++++++++++++++++++++++
>>   include/linux/clk-provider.h |   15 +++++-----
>>   2 files changed, 75 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
>> index 2cf2ea6..c331386 100644
>> --- a/drivers/clk/clk.c
>> +++ b/drivers/clk/clk.c
>> @@ -34,6 +34,74 @@ static HLIST_HEAD(clk_root_list);
>>   static HLIST_HEAD(clk_orphan_list);
>>   static LIST_HEAD(clk_notifier_list);
>>
>> +/**
>> + * clk_readl_default - default clock register read support function
>> + * @reg: register to read
>> + *
>> + * Default implementation for reading a clock register.
>> + */
>> +static u32 clk_readl_default(u32 __iomem *reg)
>> +{
>> +       return readl(reg);
>> +}
>> +
>> +/**
>> + * clk_writel_default - default clock register write support function
>> + * @val: value to write
>> + * @reg: register to write to
>> + *
>> + * Default implementation for writing a clock register.
>> + */
>> +static void clk_writel_default(u32 val, u32 __iomem *reg)
>> +{
>> +       writel(val, reg);
>> +}
>> +
>> +struct clk_reg_ops clk_reg_ops_default = {
>> +       .clk_readl = clk_readl_default,
>> +       .clk_writel = clk_writel_default
>> +};
>> +
>> +static struct clk_reg_ops *clk_reg_ops = &clk_reg_ops_default;
>> +
>> +/**
>> + * clk_register_reg_ops - register access functions for clock registers
>> + * @ops: register level ops
>> + *
>> + * Registers platform or SoC specific operations for reading / writing
>> + * clock registers.
>> + */
>> +int clk_register_reg_ops(struct clk_reg_ops *ops)
>> +{
>> +       if (!ops)
>> +               return -EINVAL;
>> +       clk_reg_ops = ops;
>> +       return 0;
>> +}
>> +
>> +/**
>> + * clk_readl - read a clock register value from hardware
>> + * @reg: register to read
>> + *
>> + * Uses the registered clk_reg_ops to read a hardware clock register value.
>> + */
>> +u32 clk_readl(u32 __iomem *reg)
>> +{
>> +       return clk_reg_ops->clk_readl(reg);
>> +}
>> +
>> +/**
>> + * clk_writel - write a clock register value to hardware
>> + * @val: value to write
>> + * @reg: register to write
>> + *
>> + * Uses the registered clk_reg_ops to write a hardware clock register value.
>> + */
>> +void clk_writel(u32 val, u32 __iomem *reg)
>> +{
>> +       clk_reg_ops->clk_writel(val, reg);
>> +}
>> +
>>   /***           locking             ***/
>>   static void clk_prepare_lock(void)
>>   {
>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>> index 7e59253..16e4df2 100644
>> --- a/include/linux/clk-provider.h
>> +++ b/include/linux/clk-provider.h
>> @@ -512,15 +512,14 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
>>    * for improved portability across platforms
>>    */
>>
>> -static inline u32 clk_readl(u32 __iomem *reg)
>> -{
>> -       return readl(reg);
>> -}
>> +struct clk_reg_ops {
>> +       u32 (*clk_readl)(u32 __iomem *reg);
>> +       void (*clk_writel)(u32 val, u32 __iomem *reg);
>> +};
>>
>> -static inline void clk_writel(u32 val, u32 __iomem *reg)
>> -{
>> -       writel(val, reg);
>> -}
>> +u32 clk_readl(u32 __iomem *reg);
>> +void clk_writel(u32 val, u32 __iomem *reg);
>> +int clk_register_reg_ops(struct clk_reg_ops *ops);
>>
>>   #endif /* CONFIG_COMMON_CLK */
>>   #endif /* CLK_PROVIDER_H */
>> --
>> 1.7.9.5
>>

Re: [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> Current clock wrappers assume simple and direct mapped hardware register
> access. Improve this support by adding functionality for registering
> platform specific clock I/O wrappers, which can be used to support
> various features needed like endianess conversions, indexed regmap support,
> etc. Default I/O wrapper provided also which uses the existing direct
> I/O mapped behavior.

I think it makes more sense to define per-SoC register read and write 
functions, for the same reason that I think it makes more sense to define 
clock data as part of the IP blocks that contain the clocks' registers.  
The register read and write functions should be implemented by the drivers 
for the IP blocks that the clocks are contained in.  That way the register 
read and write functions can take whatever steps are necessary to ensure 
that the IP block registers are accessible before performing the 
read/write; can implement non-MMIO register accesses if needed; and can 
operate on register offsets, rather than absolute addresses.

Something like the following draft implementation.  Also needed would be a 
way for clock providers that rely on the common clock providers (e.g., 
divider, mux, etc.) to pass in the struct clk_ll_ops pointer.  I guess the 
simplest way to implement this would be to add another set of registration 
functions - e.g., clk_register_divider_ipb() or clk_register_divider2() or 
something similar.  These functions would be similar to 
clk_register_divider(), but would take a pointer to a struct clk_ll_ops 
and pass that along to the CCF core.


- Paul

---
 drivers/clk/clk-divider.c    |  6 +++---
 drivers/clk/clk-gate.c       |  6 +++---
 drivers/clk/clk-mux.c        |  6 +++---
 drivers/clk/clk.c            | 18 ++++++++++++++++++
 include/linux/clk-provider.h | 28 +++++++++++++---------------
 5 files changed, 40 insertions(+), 24 deletions(-)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 8d3009e44fba..55ad7170a6e2 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -104,7 +104,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 	struct clk_divider *divider = to_clk_divider(hw);
 	unsigned int div, val;
 
-	val = clk_readl(divider->reg) >> divider->shift;
+	val = hw->ll_ops->clk_readl(divider->reg) >> divider->shift;
 	val &= div_mask(divider);
 
 	div = _get_div(divider, val);
@@ -230,11 +230,11 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
 		val = div_mask(divider) << (divider->shift + 16);
 	} else {
-		val = clk_readl(divider->reg);
+		val = hw->ll_ops->clk_readl(divider->reg);
 		val &= ~(div_mask(divider) << divider->shift);
 	}
 	val |= value << divider->shift;
-	clk_writel(val, divider->reg);
+	hw->ll_ops->clk_writel(val, divider->reg);
 
 	if (divider->lock)
 		spin_unlock_irqrestore(divider->lock, flags);
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 4a58c55255bd..a60177c7f418 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -58,7 +58,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 		if (set)
 			reg |= BIT(gate->bit_idx);
 	} else {
-		reg = clk_readl(gate->reg);
+		reg = hw->ll_ops->clk_readl(gate->reg);
 
 		if (set)
 			reg |= BIT(gate->bit_idx);
@@ -66,7 +66,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 			reg &= ~BIT(gate->bit_idx);
 	}
 
-	clk_writel(reg, gate->reg);
+	hw->ll_ops->clk_writel(reg, gate->reg);
 
 	if (gate->lock)
 		spin_unlock_irqrestore(gate->lock, flags);
@@ -89,7 +89,7 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
 	u32 reg;
 	struct clk_gate *gate = to_clk_gate(hw);
 
-	reg = clk_readl(gate->reg);
+	reg = hw->ll_ops->clk_readl(gate->reg);
 
 	/* if a set bit disables this clk, flip it before masking */
 	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 4f96ff3ba728..5b808ef5a47b 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -42,7 +42,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
 	 * val = 0x4 really means "bit 2, index starts at bit 0"
 	 */
-	val = clk_readl(mux->reg) >> mux->shift;
+	val = hw->ll_ops->clk_readl(mux->reg) >> mux->shift;
 	val &= mux->mask;
 
 	if (mux->table) {
@@ -89,11 +89,11 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	if (mux->flags & CLK_MUX_HIWORD_MASK) {
 		val = mux->mask << (mux->shift + 16);
 	} else {
-		val = clk_readl(mux->reg);
+		val = hw->ll_ops->clk_readl(mux->reg);
 		val &= ~(mux->mask << mux->shift);
 	}
 	val |= index << mux->shift;
-	clk_writel(val, mux->reg);
+	hw->ll_ops->clk_writel(val, mux->reg);
 
 	if (mux->lock)
 		spin_unlock_irqrestore(mux->lock, flags);
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2cf2ea6b77a1..7f9596469765 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/io.h>
 
 static DEFINE_SPINLOCK(enable_lock);
 static DEFINE_MUTEX(prepare_lock);
@@ -1819,6 +1820,21 @@ struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
 }
 EXPORT_SYMBOL_GPL(__clk_register);
 
+static u32 clk_readl(u32 __iomem *reg)
+{
+	return readl(reg);
+}
+
+static void clk_writel(u32 val, u32 __iomem *reg)
+{
+	writel(val, reg);
+}
+
+static const struct clk_ll_ops clk_ll_ops_default = {
+	.clk_readl = clk_readl,
+	.clk_writel = clk_writel,
+};
+
 static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk)
 {
 	int i, ret;
@@ -1831,6 +1847,8 @@ static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk)
 	}
 	clk->ops = hw->init->ops;
 	clk->hw = hw;
+	if (!clk->hw->ll_ops)
+		clk->hw->ll_ops = &clk_ll_ops_default;
 	clk->flags = hw->init->flags;
 	clk->num_parents = hw->init->num_parents;
 	hw->clk = clk;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7e59253b8603..1adbc81a3deb 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -143,6 +143,16 @@ struct clk_ops {
 };
 
 /**
+ * struct clk_ll_ops - low-level register operations on the clock's IP block
+ * @clk_readl: fn ptr to a register read function
+ * @clk_writel: fn ptr to a register write function
+ */
+struct clk_ll_ops {
+	u32		(*clk_readl)(u32 __iomem *reg);
+	void		(*clk_writel)(u32 val, u32 __iomem *reg);
+};
+
+/**
  * struct clk_init_data - holds init data that's common to all clocks and is
  * shared between the clock provider and the common clock framework.
  *
@@ -171,10 +181,13 @@ struct clk_init_data {
  *
  * @init: pointer to struct clk_init_data that contains the init data shared
  * with the common clock framework.
+ *
+ * @ll_ops: low-level operations provided by the clock's driver (readl, writel)
  */
 struct clk_hw {
 	struct clk *clk;
 	const struct clk_init_data *init;
+	const struct clk_ll_ops *ll_ops;
 };
 
 /*
@@ -507,20 +520,5 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
 	{ while (0); }
 #endif /* CONFIG_OF */
 
-/*
- * wrap access to peripherals in accessor routines
- * for improved portability across platforms
- */
-
-static inline u32 clk_readl(u32 __iomem *reg)
-{
-	return readl(reg);
-}
-
-static inline void clk_writel(u32 val, u32 __iomem *reg)
-{
-	writel(val, reg);
-}
-
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PROVIDER_H */
-- 
1.8.5.1

[PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> Current clock wrappers assume simple and direct mapped hardware register
> access. Improve this support by adding functionality for registering
> platform specific clock I/O wrappers, which can be used to support
> various features needed like endianess conversions, indexed regmap support,
> etc. Default I/O wrapper provided also which uses the existing direct
> I/O mapped behavior.

I think it makes more sense to define per-SoC register read and write 
functions, for the same reason that I think it makes more sense to define 
clock data as part of the IP blocks that contain the clocks' registers.  
The register read and write functions should be implemented by the drivers 
for the IP blocks that the clocks are contained in.  That way the register 
read and write functions can take whatever steps are necessary to ensure 
that the IP block registers are accessible before performing the 
read/write; can implement non-MMIO register accesses if needed; and can 
operate on register offsets, rather than absolute addresses.

Something like the following draft implementation.  Also needed would be a 
way for clock providers that rely on the common clock providers (e.g., 
divider, mux, etc.) to pass in the struct clk_ll_ops pointer.  I guess the 
simplest way to implement this would be to add another set of registration 
functions - e.g., clk_register_divider_ipb() or clk_register_divider2() or 
something similar.  These functions would be similar to 
clk_register_divider(), but would take a pointer to a struct clk_ll_ops 
and pass that along to the CCF core.


- Paul

---
 drivers/clk/clk-divider.c    |  6 +++---
 drivers/clk/clk-gate.c       |  6 +++---
 drivers/clk/clk-mux.c        |  6 +++---
 drivers/clk/clk.c            | 18 ++++++++++++++++++
 include/linux/clk-provider.h | 28 +++++++++++++---------------
 5 files changed, 40 insertions(+), 24 deletions(-)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 8d3009e44fba..55ad7170a6e2 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -104,7 +104,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 	struct clk_divider *divider = to_clk_divider(hw);
 	unsigned int div, val;
 
-	val = clk_readl(divider->reg) >> divider->shift;
+	val = hw->ll_ops->clk_readl(divider->reg) >> divider->shift;
 	val &= div_mask(divider);
 
 	div = _get_div(divider, val);
@@ -230,11 +230,11 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
 		val = div_mask(divider) << (divider->shift + 16);
 	} else {
-		val = clk_readl(divider->reg);
+		val = hw->ll_ops->clk_readl(divider->reg);
 		val &= ~(div_mask(divider) << divider->shift);
 	}
 	val |= value << divider->shift;
-	clk_writel(val, divider->reg);
+	hw->ll_ops->clk_writel(val, divider->reg);
 
 	if (divider->lock)
 		spin_unlock_irqrestore(divider->lock, flags);
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 4a58c55255bd..a60177c7f418 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -58,7 +58,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 		if (set)
 			reg |= BIT(gate->bit_idx);
 	} else {
-		reg = clk_readl(gate->reg);
+		reg = hw->ll_ops->clk_readl(gate->reg);
 
 		if (set)
 			reg |= BIT(gate->bit_idx);
@@ -66,7 +66,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 			reg &= ~BIT(gate->bit_idx);
 	}
 
-	clk_writel(reg, gate->reg);
+	hw->ll_ops->clk_writel(reg, gate->reg);
 
 	if (gate->lock)
 		spin_unlock_irqrestore(gate->lock, flags);
@@ -89,7 +89,7 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
 	u32 reg;
 	struct clk_gate *gate = to_clk_gate(hw);
 
-	reg = clk_readl(gate->reg);
+	reg = hw->ll_ops->clk_readl(gate->reg);
 
 	/* if a set bit disables this clk, flip it before masking */
 	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 4f96ff3ba728..5b808ef5a47b 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -42,7 +42,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
 	 * val = 0x4 really means "bit 2, index starts at bit 0"
 	 */
-	val = clk_readl(mux->reg) >> mux->shift;
+	val = hw->ll_ops->clk_readl(mux->reg) >> mux->shift;
 	val &= mux->mask;
 
 	if (mux->table) {
@@ -89,11 +89,11 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	if (mux->flags & CLK_MUX_HIWORD_MASK) {
 		val = mux->mask << (mux->shift + 16);
 	} else {
-		val = clk_readl(mux->reg);
+		val = hw->ll_ops->clk_readl(mux->reg);
 		val &= ~(mux->mask << mux->shift);
 	}
 	val |= index << mux->shift;
-	clk_writel(val, mux->reg);
+	hw->ll_ops->clk_writel(val, mux->reg);
 
 	if (mux->lock)
 		spin_unlock_irqrestore(mux->lock, flags);
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2cf2ea6b77a1..7f9596469765 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/io.h>
 
 static DEFINE_SPINLOCK(enable_lock);
 static DEFINE_MUTEX(prepare_lock);
@@ -1819,6 +1820,21 @@ struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
 }
 EXPORT_SYMBOL_GPL(__clk_register);
 
+static u32 clk_readl(u32 __iomem *reg)
+{
+	return readl(reg);
+}
+
+static void clk_writel(u32 val, u32 __iomem *reg)
+{
+	writel(val, reg);
+}
+
+static const struct clk_ll_ops clk_ll_ops_default = {
+	.clk_readl = clk_readl,
+	.clk_writel = clk_writel,
+};
+
 static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk)
 {
 	int i, ret;
@@ -1831,6 +1847,8 @@ static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk)
 	}
 	clk->ops = hw->init->ops;
 	clk->hw = hw;
+	if (!clk->hw->ll_ops)
+		clk->hw->ll_ops = &clk_ll_ops_default;
 	clk->flags = hw->init->flags;
 	clk->num_parents = hw->init->num_parents;
 	hw->clk = clk;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7e59253b8603..1adbc81a3deb 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -143,6 +143,16 @@ struct clk_ops {
 };
 
 /**
+ * struct clk_ll_ops - low-level register operations on the clock's IP block
+ * @clk_readl: fn ptr to a register read function
+ * @clk_writel: fn ptr to a register write function
+ */
+struct clk_ll_ops {
+	u32		(*clk_readl)(u32 __iomem *reg);
+	void		(*clk_writel)(u32 val, u32 __iomem *reg);
+};
+
+/**
  * struct clk_init_data - holds init data that's common to all clocks and is
  * shared between the clock provider and the common clock framework.
  *
@@ -171,10 +181,13 @@ struct clk_init_data {
  *
  * @init: pointer to struct clk_init_data that contains the init data shared
  * with the common clock framework.
+ *
+ * @ll_ops: low-level operations provided by the clock's driver (readl, writel)
  */
 struct clk_hw {
 	struct clk *clk;
 	const struct clk_init_data *init;
+	const struct clk_ll_ops *ll_ops;
 };
 
 /*
@@ -507,20 +520,5 @@ static inline const char *of_clk_get_parent_name(struct device_node *np,
 	{ while (0); }
 #endif /* CONFIG_OF */
 
-/*
- * wrap access to peripherals in accessor routines
- * for improved portability across platforms
- */
-
-static inline u32 clk_readl(u32 __iomem *reg)
-{
-	return readl(reg);
-}
-
-static inline void clk_writel(u32 val, u32 __iomem *reg)
-{
-	writel(val, reg);
-}
-
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PROVIDER_H */
-- 
1.8.5.1

Re: [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Paul Walmsley]

On Tue, 17 Dec 2013, Paul Walmsley wrote:

> On Tue, 26 Nov 2013, Tero Kristo wrote:
> 
> > Current clock wrappers assume simple and direct mapped hardware register
> > access. Improve this support by adding functionality for registering
> > platform specific clock I/O wrappers, which can be used to support
> > various features needed like endianess conversions, indexed regmap support,
> > etc. Default I/O wrapper provided also which uses the existing direct
> > I/O mapped behavior.
> 
> I think it makes more sense to define per-SoC register read and write 
> functions,

Sorry, this should have read "per-IP block register read and write 
functions".

> for the same reason that I think it makes more sense to define clock 
> data as part of the IP blocks that contain the clocks' registers.  The 
> register read and write functions should be implemented by the drivers 
> for the IP blocks that the clocks are contained in.  That way the 
> register read and write functions can take whatever steps are necessary 
> to ensure that the IP block registers are accessible before performing 
> the read/write; can implement non-MMIO register accesses if needed; and 
> can operate on register offsets, rather than absolute addresses.
> 
> Something like the following draft implementation.  Also needed would be a 
> way for clock providers that rely on the common clock providers (e.g., 
> divider, mux, etc.) to pass in the struct clk_ll_ops pointer.  I guess the 
> simplest way to implement this would be to add another set of registration 
> functions - e.g., clk_register_divider_ipb() or clk_register_divider2() or 
> something similar.  These functions would be similar to 
> clk_register_divider(), but would take a pointer to a struct clk_ll_ops 
> and pass that along to the CCF core.


- Paul

[PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions

[Paul Walmsley]

On Tue, 17 Dec 2013, Paul Walmsley wrote:

> On Tue, 26 Nov 2013, Tero Kristo wrote:
> 
> > Current clock wrappers assume simple and direct mapped hardware register
> > access. Improve this support by adding functionality for registering
> > platform specific clock I/O wrappers, which can be used to support
> > various features needed like endianess conversions, indexed regmap support,
> > etc. Default I/O wrapper provided also which uses the existing direct
> > I/O mapped behavior.
> 
> I think it makes more sense to define per-SoC register read and write 
> functions,

Sorry, this should have read "per-IP block register read and write 
functions".

> for the same reason that I think it makes more sense to define clock 
> data as part of the IP blocks that contain the clocks' registers.  The 
> register read and write functions should be implemented by the drivers 
> for the IP blocks that the clocks are contained in.  That way the 
> register read and write functions can take whatever steps are necessary 
> to ensure that the IP block registers are accessible before performing 
> the read/write; can implement non-MMIO register accesses if needed; and 
> can operate on register offsets, rather than absolute addresses.
> 
> Something like the following draft implementation.  Also needed would be a 
> way for clock providers that rely on the common clock providers (e.g., 
> divider, mux, etc.) to pass in the struct clk_ll_ops pointer.  I guess the 
> simplest way to implement this would be to add another set of registration 
> functions - e.g., clk_register_divider_ipb() or clk_register_divider2() or 
> something similar.  These functions would be similar to 
> clk_register_divider(), but would take a pointer to a struct clk_ll_ops 
> and pass that along to the CCF core.


- Paul

[PATCHv10 02/41] CLK: TI: add DT alias clock registration mechanism

[Tero Kristo]

Some devices require their clocks to be available with a specific
dev-id con-id mapping. With DT, the clocks can be found by default
only with their name, or alternatively through the device node of
the consumer. With drivers, that don't support DT fully yet, add
mechanism to register specific clock names.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/Makefile    |    1 +
 drivers/clk/ti/Makefile |    3 +++
 drivers/clk/ti/clk.c    |   55 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h  |   42 ++++++++++++++++++++++++++++++++++++
 4 files changed, 101 insertions(+)
 create mode 100644 drivers/clk/ti/Makefile
 create mode 100644 drivers/clk/ti/clk.c
 create mode 100644 include/linux/clk/ti.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 7a10bc9..c61f768 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_PLAT_SAMSUNG)	+= samsung/
 obj-$(CONFIG_COMMON_CLK_XGENE)  += clk-xgene.o
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
+obj-$(CONFIG_ARCH_OMAP)		+= ti/
 
 obj-$(CONFIG_X86)		+= x86/
 
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
new file mode 100644
index 0000000..1825f7f
--- /dev/null
+++ b/drivers/clk/ti/Makefile
@@ -0,0 +1,3 @@
+ifneq ($(CONFIG_OF),)
+obj-y					+= clk.o
+endif
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
new file mode 100644
index 0000000..ef1a7cd
--- /dev/null
+++ b/drivers/clk/ti/clk.c
@@ -0,0 +1,55 @@
+/*
+ * TI clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+#include <linux/of.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * ti_dt_clocks_register - register DT alias clocks during boot
+ * @oclks: list of clocks to register
+ *
+ * Register alias or non-standard DT clock entries during boot. By
+ * default, DT clocks are found based on their node name. If any
+ * additional con-id / dev-id -> clock mapping is required, use this
+ * function to list these.
+ */
+void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
+{
+	struct ti_dt_clk *c;
+	struct device_node *node;
+	struct clk *clk;
+	struct of_phandle_args clkspec;
+
+	for (c = oclks; c->node_name != NULL; c++) {
+		node = of_find_node_by_name(NULL, c->node_name);
+		clkspec.np = node;
+		clk = of_clk_get_from_provider(&clkspec);
+
+		if (!IS_ERR(clk)) {
+			c->lk.clk = clk;
+			clkdev_add(&c->lk);
+		} else {
+			pr_warn("failed to lookup clock node %s\n",
+				c->node_name);
+		}
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
new file mode 100644
index 0000000..df94c24
--- /dev/null
+++ b/include/linux/clk/ti.h
@@ -0,0 +1,42 @@
+/*
+ * TI clock drivers support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __LINUX_CLK_TI_H__
+#define __LINUX_CLK_TI_H__
+
+#include <linux/clkdev.h>
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+	struct clk_lookup		lk;
+	char				*node_name;
+};
+
+#define DT_CLK(dev, con, name)		\
+	{				\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+		},			\
+		.node_name = name,	\
+	}
+
+
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+
+#endif
-- 
1.7.9.5

[PATCHv10 02/41] CLK: TI: add DT alias clock registration mechanism

[Tero Kristo]

Some devices require their clocks to be available with a specific
dev-id con-id mapping. With DT, the clocks can be found by default
only with their name, or alternatively through the device node of
the consumer. With drivers, that don't support DT fully yet, add
mechanism to register specific clock names.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/Makefile    |    1 +
 drivers/clk/ti/Makefile |    3 +++
 drivers/clk/ti/clk.c    |   55 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h  |   42 ++++++++++++++++++++++++++++++++++++
 4 files changed, 101 insertions(+)
 create mode 100644 drivers/clk/ti/Makefile
 create mode 100644 drivers/clk/ti/clk.c
 create mode 100644 include/linux/clk/ti.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 7a10bc9..c61f768 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_PLAT_SAMSUNG)	+= samsung/
 obj-$(CONFIG_COMMON_CLK_XGENE)  += clk-xgene.o
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
+obj-$(CONFIG_ARCH_OMAP)		+= ti/
 
 obj-$(CONFIG_X86)		+= x86/
 
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
new file mode 100644
index 0000000..1825f7f
--- /dev/null
+++ b/drivers/clk/ti/Makefile
@@ -0,0 +1,3 @@
+ifneq ($(CONFIG_OF),)
+obj-y					+= clk.o
+endif
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
new file mode 100644
index 0000000..ef1a7cd
--- /dev/null
+++ b/drivers/clk/ti/clk.c
@@ -0,0 +1,55 @@
+/*
+ * TI clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+#include <linux/of.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * ti_dt_clocks_register - register DT alias clocks during boot
+ * @oclks: list of clocks to register
+ *
+ * Register alias or non-standard DT clock entries during boot. By
+ * default, DT clocks are found based on their node name. If any
+ * additional con-id / dev-id -> clock mapping is required, use this
+ * function to list these.
+ */
+void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
+{
+	struct ti_dt_clk *c;
+	struct device_node *node;
+	struct clk *clk;
+	struct of_phandle_args clkspec;
+
+	for (c = oclks; c->node_name != NULL; c++) {
+		node = of_find_node_by_name(NULL, c->node_name);
+		clkspec.np = node;
+		clk = of_clk_get_from_provider(&clkspec);
+
+		if (!IS_ERR(clk)) {
+			c->lk.clk = clk;
+			clkdev_add(&c->lk);
+		} else {
+			pr_warn("failed to lookup clock node %s\n",
+				c->node_name);
+		}
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
new file mode 100644
index 0000000..df94c24
--- /dev/null
+++ b/include/linux/clk/ti.h
@@ -0,0 +1,42 @@
+/*
+ * TI clock drivers support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __LINUX_CLK_TI_H__
+#define __LINUX_CLK_TI_H__
+
+#include <linux/clkdev.h>
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+	struct clk_lookup		lk;
+	char				*node_name;
+};
+
+#define DT_CLK(dev, con, name)		\
+	{				\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+		},			\
+		.node_name = name,	\
+	}
+
+
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+
+#endif
-- 
1.7.9.5

[PATCHv10 03/41] CLK: ti: add init support for clock IP blocks

[Tero Kristo]

ti_dt_clk_init_provider() can now be used to initialize the contents of
a single clock IP block. This parses all the clocks under the IP block
and calls the corresponding init function for them.

This patch also introduces a helper function for the TI clock drivers
to get register info from DT and append the master IP info to this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/ti/clk.c   |   98 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h |   14 +++++++
 2 files changed, 112 insertions(+)

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index ef1a7cd..63f85e9 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -19,10 +19,15 @@
 #include <linux/clkdev.h>
 #include <linux/clk/ti.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/list.h>
 
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
+extern struct of_device_id __clk_of_table[];
+static int ti_dt_clk_regmap_index;
+
 /**
  * ti_dt_clocks_register - register DT alias clocks during boot
  * @oclks: list of clocks to register
@@ -53,3 +58,96 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 		}
 	}
 }
+
+typedef int (*ti_of_clk_init_cb_t)(struct device_node *);
+
+struct clk_init_item {
+	int index;
+	struct device_node *np;
+	ti_of_clk_init_cb_t init_cb;
+	struct list_head node;
+};
+
+static LIST_HEAD(retry_list);
+
+/**
+ * ti_clk_get_reg_addr - get register address for a clock register
+ * @node: device node for the clock
+ * @index: register index from the clock node
+ *
+ * Builds clock register address from device tree information. This
+ * is a struct of type clk_omap_reg.
+ */
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
+{
+	struct clk_omap_reg *reg;
+	u32 val;
+	u32 tmp;
+
+	reg = (struct clk_omap_reg *)&tmp;
+	reg->index = ti_dt_clk_regmap_index;
+
+	if (of_property_read_u32_index(node, "reg", index, &val)) {
+		pr_err("%s must have reg[%d]!\n", node->name, index);
+		return NULL;
+	}
+
+	reg->offset = val;
+
+	return (void __iomem *)tmp;
+}
+
+/**
+ * ti_dt_clk_init_provider - init master clock provider
+ * @parent: master node
+ * @index: internal index for clk_reg_ops
+ *
+ * Initializes a master clock IP block and its child clock nodes.
+ * Regmap is provided for accessing the register space for the
+ * IP block and all the clocks under it.
+ */
+void ti_dt_clk_init_provider(struct device_node *parent, int index)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+	ti_of_clk_init_cb_t clk_init_cb;
+	struct clk_init_item *retry;
+	struct clk_init_item *tmp;
+	int ret;
+
+	ti_dt_clk_regmap_index = index;
+
+	for_each_child_of_node(parent, np) {
+		match = of_match_node(__clk_of_table, np);
+		if (!match)
+			continue;
+		clk_init_cb = (ti_of_clk_init_cb_t)match->data;
+		pr_debug("%s: initializing: %s\n", __func__, np->name);
+		ret = clk_init_cb(np);
+		if (ret == -EAGAIN) {
+			pr_debug("%s: adding to again list...\n", np->name);
+			retry = kzalloc(sizeof(*retry), GFP_KERNEL);
+			retry->np = np;
+			retry->init_cb = clk_init_cb;
+			list_add(&retry->node, &retry_list);
+		} else if (ret) {
+			pr_err("%s: clock init failed for %s (%d)!\n", __func__,
+			       np->name, ret);
+		}
+	}
+
+	list_for_each_entry_safe(retry, tmp, &retry_list, node) {
+		pr_debug("%s: retry-init: %s\n", __func__, retry->np->name);
+		ti_dt_clk_regmap_index = retry->index;
+		ret = retry->init_cb(retry->np);
+		if (ret == -EAGAIN) {
+			pr_debug("%s failed again?\n", retry->np->name);
+		} else {
+			if (ret)
+				pr_err("%s: clock init failed for %s (%d)!\n",
+				       __func__, retry->np->name, ret);
+			list_del(&retry->node);
+			kfree(retry);
+		}
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index df94c24..d6bf530 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -36,7 +36,21 @@ struct ti_dt_clk {
 		.node_name = name,	\
 	}
 
+/* Maximum number of clock regmaps */
+#define CLK_MAX_REGMAPS			4
 
+/**
+ * struct clk_omap_reg - OMAP register declaration
+ * @offset: offset from the master IP module base address
+ * @index: index of the master IP module
+ */
+struct clk_omap_reg {
+	u16 offset;
+	u16 index;
+};
+
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+void ti_dt_clk_init_provider(struct device_node *np, int index);
 
 #endif
-- 
1.7.9.5

[PATCHv10 03/41] CLK: ti: add init support for clock IP blocks

[Tero Kristo]

ti_dt_clk_init_provider() can now be used to initialize the contents of
a single clock IP block. This parses all the clocks under the IP block
and calls the corresponding init function for them.

This patch also introduces a helper function for the TI clock drivers
to get register info from DT and append the master IP info to this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/ti/clk.c   |   98 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h |   14 +++++++
 2 files changed, 112 insertions(+)

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index ef1a7cd..63f85e9 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -19,10 +19,15 @@
 #include <linux/clkdev.h>
 #include <linux/clk/ti.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/list.h>
 
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
+extern struct of_device_id __clk_of_table[];
+static int ti_dt_clk_regmap_index;
+
 /**
  * ti_dt_clocks_register - register DT alias clocks during boot
  * @oclks: list of clocks to register
@@ -53,3 +58,96 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 		}
 	}
 }
+
+typedef int (*ti_of_clk_init_cb_t)(struct device_node *);
+
+struct clk_init_item {
+	int index;
+	struct device_node *np;
+	ti_of_clk_init_cb_t init_cb;
+	struct list_head node;
+};
+
+static LIST_HEAD(retry_list);
+
+/**
+ * ti_clk_get_reg_addr - get register address for a clock register
+ * @node: device node for the clock
+ * @index: register index from the clock node
+ *
+ * Builds clock register address from device tree information. This
+ * is a struct of type clk_omap_reg.
+ */
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
+{
+	struct clk_omap_reg *reg;
+	u32 val;
+	u32 tmp;
+
+	reg = (struct clk_omap_reg *)&tmp;
+	reg->index = ti_dt_clk_regmap_index;
+
+	if (of_property_read_u32_index(node, "reg", index, &val)) {
+		pr_err("%s must have reg[%d]!\n", node->name, index);
+		return NULL;
+	}
+
+	reg->offset = val;
+
+	return (void __iomem *)tmp;
+}
+
+/**
+ * ti_dt_clk_init_provider - init master clock provider
+ * @parent: master node
+ * @index: internal index for clk_reg_ops
+ *
+ * Initializes a master clock IP block and its child clock nodes.
+ * Regmap is provided for accessing the register space for the
+ * IP block and all the clocks under it.
+ */
+void ti_dt_clk_init_provider(struct device_node *parent, int index)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+	ti_of_clk_init_cb_t clk_init_cb;
+	struct clk_init_item *retry;
+	struct clk_init_item *tmp;
+	int ret;
+
+	ti_dt_clk_regmap_index = index;
+
+	for_each_child_of_node(parent, np) {
+		match = of_match_node(__clk_of_table, np);
+		if (!match)
+			continue;
+		clk_init_cb = (ti_of_clk_init_cb_t)match->data;
+		pr_debug("%s: initializing: %s\n", __func__, np->name);
+		ret = clk_init_cb(np);
+		if (ret == -EAGAIN) {
+			pr_debug("%s: adding to again list...\n", np->name);
+			retry = kzalloc(sizeof(*retry), GFP_KERNEL);
+			retry->np = np;
+			retry->init_cb = clk_init_cb;
+			list_add(&retry->node, &retry_list);
+		} else if (ret) {
+			pr_err("%s: clock init failed for %s (%d)!\n", __func__,
+			       np->name, ret);
+		}
+	}
+
+	list_for_each_entry_safe(retry, tmp, &retry_list, node) {
+		pr_debug("%s: retry-init: %s\n", __func__, retry->np->name);
+		ti_dt_clk_regmap_index = retry->index;
+		ret = retry->init_cb(retry->np);
+		if (ret == -EAGAIN) {
+			pr_debug("%s failed again?\n", retry->np->name);
+		} else {
+			if (ret)
+				pr_err("%s: clock init failed for %s (%d)!\n",
+				       __func__, retry->np->name, ret);
+			list_del(&retry->node);
+			kfree(retry);
+		}
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index df94c24..d6bf530 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -36,7 +36,21 @@ struct ti_dt_clk {
 		.node_name = name,	\
 	}
 
+/* Maximum number of clock regmaps */
+#define CLK_MAX_REGMAPS			4
 
+/**
+ * struct clk_omap_reg - OMAP register declaration
+ * @offset: offset from the master IP module base address
+ * @index: index of the master IP module
+ */
+struct clk_omap_reg {
+	u16 offset;
+	u16 index;
+};
+
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+void ti_dt_clk_init_provider(struct device_node *np, int index);
 
 #endif
-- 
1.7.9.5

Re: [PATCHv10 03/41] CLK: ti: add init support for clock IP blocks

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> ti_dt_clk_init_provider() can now be used to initialize the contents of
> a single clock IP block. This parses all the clocks under the IP block
> and calls the corresponding init function for them.
> 
> This patch also introduces a helper function for the TI clock drivers
> to get register info from DT and append the master IP info to this.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
> index ef1a7cd..63f85e9 100644
> --- a/drivers/clk/ti/clk.c
> +++ b/drivers/clk/ti/clk.c
> @@ -19,10 +19,15 @@
>  #include <linux/clkdev.h>
>  #include <linux/clk/ti.h>
>  #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/list.h>
>  
>  #undef pr_fmt
>  #define pr_fmt(fmt) "%s: " fmt, __func__
>  
> +extern struct of_device_id __clk_of_table[];

This results in a checkpatch.pl warning:

WARNING: externs should be avoided in .c files
#33: FILE: drivers/clk/ti/clk.c:28:
+extern struct of_device_id __clk_of_table[];

Please make sure your patches are checkpatch.pl-clean, with the exception 
of the 80-column warnings and any const-related warnings related to the 
clock framework.

> +static int ti_dt_clk_regmap_index;
> +
>  /**
>   * ti_dt_clocks_register - register DT alias clocks during boot
>   * @oclks: list of clocks to register
> @@ -53,3 +58,96 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
>  		}
>  	}
>  }
> +
> +typedef int (*ti_of_clk_init_cb_t)(struct device_node *);

Normally typedefs should be a red flag to reviewers due to 
Documentation/CodingStyle chapter 5.  Still it seems this patch is just 
duplicating the way that the CCF does it, so I'm not too worried about it.

> +
> +struct clk_init_item {
> +	int index;
> +	struct device_node *np;
> +	ti_of_clk_init_cb_t init_cb;
> +	struct list_head node;
> +};
> +
> +static LIST_HEAD(retry_list);
> +
> +/**
> + * ti_clk_get_reg_addr - get register address for a clock register
> + * @node: device node for the clock
> + * @index: register index from the clock node
> + *
> + * Builds clock register address from device tree information. This
> + * is a struct of type clk_omap_reg.
> + */
> +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
> +{
> +	struct clk_omap_reg *reg;
> +	u32 val;
> +	u32 tmp;
> +
> +	reg = (struct clk_omap_reg *)&tmp;
> +	reg->index = ti_dt_clk_regmap_index;
> +
> +	if (of_property_read_u32_index(node, "reg", index, &val)) {
> +		pr_err("%s must have reg[%d]!\n", node->name, index);
> +		return NULL;
> +	}
> +
> +	reg->offset = val;
> +
> +	return (void __iomem *)tmp;
> +}
> +
> +/**
> + * ti_dt_clk_init_provider - init master clock provider
> + * @parent: master node
> + * @index: internal index for clk_reg_ops
> + *
> + * Initializes a master clock IP block and its child clock nodes.
> + * Regmap is provided for accessing the register space for the
> + * IP block and all the clocks under it.
> + */
> +void ti_dt_clk_init_provider(struct device_node *parent, int index)
> +{
> +	const struct of_device_id *match;
> +	struct device_node *np;
> +	ti_of_clk_init_cb_t clk_init_cb;
> +	struct clk_init_item *retry;
> +	struct clk_init_item *tmp;
> +	int ret;
> +
> +	ti_dt_clk_regmap_index = index;
> +
> +	for_each_child_of_node(parent, np) {
> +		match = of_match_node(__clk_of_table, np);
> +		if (!match)
> +			continue;
> +		clk_init_cb = (ti_of_clk_init_cb_t)match->data;
> +		pr_debug("%s: initializing: %s\n", __func__, np->name);
> +		ret = clk_init_cb(np);
> +		if (ret == -EAGAIN) {
> +			pr_debug("%s: adding to again list...\n", np->name);
> +			retry = kzalloc(sizeof(*retry), GFP_KERNEL);
> +			retry->np = np;
> +			retry->init_cb = clk_init_cb;
> +			list_add(&retry->node, &retry_list);
> +		} else if (ret) {
> +			pr_err("%s: clock init failed for %s (%d)!\n", __func__,
> +			       np->name, ret);
> +		}
> +	}
> +
> +	list_for_each_entry_safe(retry, tmp, &retry_list, node) {
> +		pr_debug("%s: retry-init: %s\n", __func__, retry->np->name);
> +		ti_dt_clk_regmap_index = retry->index;
> +		ret = retry->init_cb(retry->np);
> +		if (ret == -EAGAIN) {
> +			pr_debug("%s failed again?\n", retry->np->name);

This is presumably a serious error condition and should be a pr_warn() or 
pr_err(), right?

If retry_list won't be walked again, then it seems best to delete and free 
the list_entry no matter what the return value is from retry->init_cb(), 
since it's not like it will be retried.  Otherwise the code will leak 
memory.

> +		} else {
> +			if (ret)
> +				pr_err("%s: clock init failed for %s (%d)!\n",
> +				       __func__, retry->np->name, ret);
> +			list_del(&retry->node);
> +			kfree(retry);
> +		}
> +	}
> +}
> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> index df94c24..d6bf530 100644
> --- a/include/linux/clk/ti.h
> +++ b/include/linux/clk/ti.h
> @@ -36,7 +36,21 @@ struct ti_dt_clk {
>  		.node_name = name,	\
>  	}
>  
> +/* Maximum number of clock regmaps */
> +#define CLK_MAX_REGMAPS			4
>  
> +/**
> + * struct clk_omap_reg - OMAP register declaration
> + * @offset: offset from the master IP module base address
> + * @index: index of the master IP module
> + */
> +struct clk_omap_reg {
> +	u16 offset;
> +	u16 index;
> +};
> +
> +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>  void ti_dt_clocks_register(struct ti_dt_clk *oclks);
> +void ti_dt_clk_init_provider(struct device_node *np, int index);
>  
>  #endif
> -- 
> 1.7.9.5
> 


- Paul

[PATCHv10 03/41] CLK: ti: add init support for clock IP blocks

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> ti_dt_clk_init_provider() can now be used to initialize the contents of
> a single clock IP block. This parses all the clocks under the IP block
> and calls the corresponding init function for them.
> 
> This patch also introduces a helper function for the TI clock drivers
> to get register info from DT and append the master IP info to this.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
> index ef1a7cd..63f85e9 100644
> --- a/drivers/clk/ti/clk.c
> +++ b/drivers/clk/ti/clk.c
> @@ -19,10 +19,15 @@
>  #include <linux/clkdev.h>
>  #include <linux/clk/ti.h>
>  #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/list.h>
>  
>  #undef pr_fmt
>  #define pr_fmt(fmt) "%s: " fmt, __func__
>  
> +extern struct of_device_id __clk_of_table[];

This results in a checkpatch.pl warning:

WARNING: externs should be avoided in .c files
#33: FILE: drivers/clk/ti/clk.c:28:
+extern struct of_device_id __clk_of_table[];

Please make sure your patches are checkpatch.pl-clean, with the exception 
of the 80-column warnings and any const-related warnings related to the 
clock framework.

> +static int ti_dt_clk_regmap_index;
> +
>  /**
>   * ti_dt_clocks_register - register DT alias clocks during boot
>   * @oclks: list of clocks to register
> @@ -53,3 +58,96 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
>  		}
>  	}
>  }
> +
> +typedef int (*ti_of_clk_init_cb_t)(struct device_node *);

Normally typedefs should be a red flag to reviewers due to 
Documentation/CodingStyle chapter 5.  Still it seems this patch is just 
duplicating the way that the CCF does it, so I'm not too worried about it.

> +
> +struct clk_init_item {
> +	int index;
> +	struct device_node *np;
> +	ti_of_clk_init_cb_t init_cb;
> +	struct list_head node;
> +};
> +
> +static LIST_HEAD(retry_list);
> +
> +/**
> + * ti_clk_get_reg_addr - get register address for a clock register
> + * @node: device node for the clock
> + * @index: register index from the clock node
> + *
> + * Builds clock register address from device tree information. This
> + * is a struct of type clk_omap_reg.
> + */
> +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
> +{
> +	struct clk_omap_reg *reg;
> +	u32 val;
> +	u32 tmp;
> +
> +	reg = (struct clk_omap_reg *)&tmp;
> +	reg->index = ti_dt_clk_regmap_index;
> +
> +	if (of_property_read_u32_index(node, "reg", index, &val)) {
> +		pr_err("%s must have reg[%d]!\n", node->name, index);
> +		return NULL;
> +	}
> +
> +	reg->offset = val;
> +
> +	return (void __iomem *)tmp;
> +}
> +
> +/**
> + * ti_dt_clk_init_provider - init master clock provider
> + * @parent: master node
> + * @index: internal index for clk_reg_ops
> + *
> + * Initializes a master clock IP block and its child clock nodes.
> + * Regmap is provided for accessing the register space for the
> + * IP block and all the clocks under it.
> + */
> +void ti_dt_clk_init_provider(struct device_node *parent, int index)
> +{
> +	const struct of_device_id *match;
> +	struct device_node *np;
> +	ti_of_clk_init_cb_t clk_init_cb;
> +	struct clk_init_item *retry;
> +	struct clk_init_item *tmp;
> +	int ret;
> +
> +	ti_dt_clk_regmap_index = index;
> +
> +	for_each_child_of_node(parent, np) {
> +		match = of_match_node(__clk_of_table, np);
> +		if (!match)
> +			continue;
> +		clk_init_cb = (ti_of_clk_init_cb_t)match->data;
> +		pr_debug("%s: initializing: %s\n", __func__, np->name);
> +		ret = clk_init_cb(np);
> +		if (ret == -EAGAIN) {
> +			pr_debug("%s: adding to again list...\n", np->name);
> +			retry = kzalloc(sizeof(*retry), GFP_KERNEL);
> +			retry->np = np;
> +			retry->init_cb = clk_init_cb;
> +			list_add(&retry->node, &retry_list);
> +		} else if (ret) {
> +			pr_err("%s: clock init failed for %s (%d)!\n", __func__,
> +			       np->name, ret);
> +		}
> +	}
> +
> +	list_for_each_entry_safe(retry, tmp, &retry_list, node) {
> +		pr_debug("%s: retry-init: %s\n", __func__, retry->np->name);
> +		ti_dt_clk_regmap_index = retry->index;
> +		ret = retry->init_cb(retry->np);
> +		if (ret == -EAGAIN) {
> +			pr_debug("%s failed again?\n", retry->np->name);

This is presumably a serious error condition and should be a pr_warn() or 
pr_err(), right?

If retry_list won't be walked again, then it seems best to delete and free 
the list_entry no matter what the return value is from retry->init_cb(), 
since it's not like it will be retried.  Otherwise the code will leak 
memory.

> +		} else {
> +			if (ret)
> +				pr_err("%s: clock init failed for %s (%d)!\n",
> +				       __func__, retry->np->name, ret);
> +			list_del(&retry->node);
> +			kfree(retry);
> +		}
> +	}
> +}
> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> index df94c24..d6bf530 100644
> --- a/include/linux/clk/ti.h
> +++ b/include/linux/clk/ti.h
> @@ -36,7 +36,21 @@ struct ti_dt_clk {
>  		.node_name = name,	\
>  	}
>  
> +/* Maximum number of clock regmaps */
> +#define CLK_MAX_REGMAPS			4
>  
> +/**
> + * struct clk_omap_reg - OMAP register declaration
> + * @offset: offset from the master IP module base address
> + * @index: index of the master IP module
> + */
> +struct clk_omap_reg {
> +	u16 offset;
> +	u16 index;
> +};
> +
> +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>  void ti_dt_clocks_register(struct ti_dt_clk *oclks);
> +void ti_dt_clk_init_provider(struct device_node *np, int index);
>  
>  #endif
> -- 
> 1.7.9.5
> 


- Paul

Re: [PATCHv10 03/41] CLK: ti: add init support for clock IP blocks

[Tero Kristo]

On 12/17/2013 10:14 AM, Paul Walmsley wrote:
> On Tue, 26 Nov 2013, Tero Kristo wrote:
>
>> ti_dt_clk_init_provider() can now be used to initialize the contents of
>> a single clock IP block. This parses all the clocks under the IP block
>> and calls the corresponding init function for them.
>>
>> This patch also introduces a helper function for the TI clock drivers
>> to get register info from DT and append the master IP info to this.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>
> ...
>
>> diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
>> index ef1a7cd..63f85e9 100644
>> --- a/drivers/clk/ti/clk.c
>> +++ b/drivers/clk/ti/clk.c
>> @@ -19,10 +19,15 @@
>>   #include <linux/clkdev.h>
>>   #include <linux/clk/ti.h>
>>   #include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/list.h>
>>
>>   #undef pr_fmt
>>   #define pr_fmt(fmt) "%s: " fmt, __func__
>>
>> +extern struct of_device_id __clk_of_table[];
>
> This results in a checkpatch.pl warning:
>
> WARNING: externs should be avoided in .c files
> #33: FILE: drivers/clk/ti/clk.c:28:
> +extern struct of_device_id __clk_of_table[];

This extern is only needed from this single file, and this code is 
duplicated from drivers/clk/clk.c.

> Please make sure your patches are checkpatch.pl-clean, with the exception
> of the 80-column warnings and any const-related warnings related to the
> clock framework.
>
>> +static int ti_dt_clk_regmap_index;
>> +
>>   /**
>>    * ti_dt_clocks_register - register DT alias clocks during boot
>>    * @oclks: list of clocks to register
>> @@ -53,3 +58,96 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
>>   		}
>>   	}
>>   }
>> +
>> +typedef int (*ti_of_clk_init_cb_t)(struct device_node *);
>
> Normally typedefs should be a red flag to reviewers due to
> Documentation/CodingStyle chapter 5.  Still it seems this patch is just
> duplicating the way that the CCF does it, so I'm not too worried about it.

This will be removed in next rev, and the standard typedef done by CCF 
will be used instead.

>
>> +
>> +struct clk_init_item {
>> +	int index;
>> +	struct device_node *np;
>> +	ti_of_clk_init_cb_t init_cb;
>> +	struct list_head node;
>> +};
>> +
>> +static LIST_HEAD(retry_list);
>> +
>> +/**
>> + * ti_clk_get_reg_addr - get register address for a clock register
>> + * @node: device node for the clock
>> + * @index: register index from the clock node
>> + *
>> + * Builds clock register address from device tree information. This
>> + * is a struct of type clk_omap_reg.
>> + */
>> +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
>> +{
>> +	struct clk_omap_reg *reg;
>> +	u32 val;
>> +	u32 tmp;
>> +
>> +	reg = (struct clk_omap_reg *)&tmp;
>> +	reg->index = ti_dt_clk_regmap_index;
>> +
>> +	if (of_property_read_u32_index(node, "reg", index, &val)) {
>> +		pr_err("%s must have reg[%d]!\n", node->name, index);
>> +		return NULL;
>> +	}
>> +
>> +	reg->offset = val;
>> +
>> +	return (void __iomem *)tmp;
>> +}
>> +
>> +/**
>> + * ti_dt_clk_init_provider - init master clock provider
>> + * @parent: master node
>> + * @index: internal index for clk_reg_ops
>> + *
>> + * Initializes a master clock IP block and its child clock nodes.
>> + * Regmap is provided for accessing the register space for the
>> + * IP block and all the clocks under it.
>> + */
>> +void ti_dt_clk_init_provider(struct device_node *parent, int index)
>> +{
>> +	const struct of_device_id *match;
>> +	struct device_node *np;
>> +	ti_of_clk_init_cb_t clk_init_cb;
>> +	struct clk_init_item *retry;
>> +	struct clk_init_item *tmp;
>> +	int ret;
>> +
>> +	ti_dt_clk_regmap_index = index;
>> +
>> +	for_each_child_of_node(parent, np) {
>> +		match = of_match_node(__clk_of_table, np);
>> +		if (!match)
>> +			continue;
>> +		clk_init_cb = (ti_of_clk_init_cb_t)match->data;
>> +		pr_debug("%s: initializing: %s\n", __func__, np->name);
>> +		ret = clk_init_cb(np);
>> +		if (ret == -EAGAIN) {
>> +			pr_debug("%s: adding to again list...\n", np->name);
>> +			retry = kzalloc(sizeof(*retry), GFP_KERNEL);
>> +			retry->np = np;
>> +			retry->init_cb = clk_init_cb;
>> +			list_add(&retry->node, &retry_list);
>> +		} else if (ret) {
>> +			pr_err("%s: clock init failed for %s (%d)!\n", __func__,
>> +			       np->name, ret);
>> +		}
>> +	}
>> +
>> +	list_for_each_entry_safe(retry, tmp, &retry_list, node) {
>> +		pr_debug("%s: retry-init: %s\n", __func__, retry->np->name);
>> +		ti_dt_clk_regmap_index = retry->index;
>> +		ret = retry->init_cb(retry->np);
>> +		if (ret == -EAGAIN) {
>> +			pr_debug("%s failed again?\n", retry->np->name);
>
> This is presumably a serious error condition and should be a pr_warn() or
> pr_err(), right?

Not a serious, I think this can happen still if we have dependencies 
towards clocks from other IP blocks which provide clocks (e.g. DPLL uses 
source clocks from both PRM + CM IPs.)

> If retry_list won't be walked again, then it seems best to delete and free
> the list_entry no matter what the return value is from retry->init_cb(),
> since it's not like it will be retried.  Otherwise the code will leak
> memory.

It is actually retried, once the next IP block does its init.

-Tero

>
>> +		} else {
>> +			if (ret)
>> +				pr_err("%s: clock init failed for %s (%d)!\n",
>> +				       __func__, retry->np->name, ret);
>> +			list_del(&retry->node);
>> +			kfree(retry);
>> +		}
>> +	}
>> +}
>> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
>> index df94c24..d6bf530 100644
>> --- a/include/linux/clk/ti.h
>> +++ b/include/linux/clk/ti.h
>> @@ -36,7 +36,21 @@ struct ti_dt_clk {
>>   		.node_name = name,	\
>>   	}
>>
>> +/* Maximum number of clock regmaps */
>> +#define CLK_MAX_REGMAPS			4
>>
>> +/**
>> + * struct clk_omap_reg - OMAP register declaration
>> + * @offset: offset from the master IP module base address
>> + * @index: index of the master IP module
>> + */
>> +struct clk_omap_reg {
>> +	u16 offset;
>> +	u16 index;
>> +};
>> +
>> +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>>   void ti_dt_clocks_register(struct ti_dt_clk *oclks);
>> +void ti_dt_clk_init_provider(struct device_node *np, int index);
>>
>>   #endif
>> --
>> 1.7.9.5
>>
>
>
> - Paul
>

[PATCHv10 03/41] CLK: ti: add init support for clock IP blocks

[Tero Kristo]

On 12/17/2013 10:14 AM, Paul Walmsley wrote:
> On Tue, 26 Nov 2013, Tero Kristo wrote:
>
>> ti_dt_clk_init_provider() can now be used to initialize the contents of
>> a single clock IP block. This parses all the clocks under the IP block
>> and calls the corresponding init function for them.
>>
>> This patch also introduces a helper function for the TI clock drivers
>> to get register info from DT and append the master IP info to this.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>
> ...
>
>> diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
>> index ef1a7cd..63f85e9 100644
>> --- a/drivers/clk/ti/clk.c
>> +++ b/drivers/clk/ti/clk.c
>> @@ -19,10 +19,15 @@
>>   #include <linux/clkdev.h>
>>   #include <linux/clk/ti.h>
>>   #include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/list.h>
>>
>>   #undef pr_fmt
>>   #define pr_fmt(fmt) "%s: " fmt, __func__
>>
>> +extern struct of_device_id __clk_of_table[];
>
> This results in a checkpatch.pl warning:
>
> WARNING: externs should be avoided in .c files
> #33: FILE: drivers/clk/ti/clk.c:28:
> +extern struct of_device_id __clk_of_table[];

This extern is only needed from this single file, and this code is 
duplicated from drivers/clk/clk.c.

> Please make sure your patches are checkpatch.pl-clean, with the exception
> of the 80-column warnings and any const-related warnings related to the
> clock framework.
>
>> +static int ti_dt_clk_regmap_index;
>> +
>>   /**
>>    * ti_dt_clocks_register - register DT alias clocks during boot
>>    * @oclks: list of clocks to register
>> @@ -53,3 +58,96 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
>>   		}
>>   	}
>>   }
>> +
>> +typedef int (*ti_of_clk_init_cb_t)(struct device_node *);
>
> Normally typedefs should be a red flag to reviewers due to
> Documentation/CodingStyle chapter 5.  Still it seems this patch is just
> duplicating the way that the CCF does it, so I'm not too worried about it.

This will be removed in next rev, and the standard typedef done by CCF 
will be used instead.

>
>> +
>> +struct clk_init_item {
>> +	int index;
>> +	struct device_node *np;
>> +	ti_of_clk_init_cb_t init_cb;
>> +	struct list_head node;
>> +};
>> +
>> +static LIST_HEAD(retry_list);
>> +
>> +/**
>> + * ti_clk_get_reg_addr - get register address for a clock register
>> + * @node: device node for the clock
>> + * @index: register index from the clock node
>> + *
>> + * Builds clock register address from device tree information. This
>> + * is a struct of type clk_omap_reg.
>> + */
>> +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
>> +{
>> +	struct clk_omap_reg *reg;
>> +	u32 val;
>> +	u32 tmp;
>> +
>> +	reg = (struct clk_omap_reg *)&tmp;
>> +	reg->index = ti_dt_clk_regmap_index;
>> +
>> +	if (of_property_read_u32_index(node, "reg", index, &val)) {
>> +		pr_err("%s must have reg[%d]!\n", node->name, index);
>> +		return NULL;
>> +	}
>> +
>> +	reg->offset = val;
>> +
>> +	return (void __iomem *)tmp;
>> +}
>> +
>> +/**
>> + * ti_dt_clk_init_provider - init master clock provider
>> + * @parent: master node
>> + * @index: internal index for clk_reg_ops
>> + *
>> + * Initializes a master clock IP block and its child clock nodes.
>> + * Regmap is provided for accessing the register space for the
>> + * IP block and all the clocks under it.
>> + */
>> +void ti_dt_clk_init_provider(struct device_node *parent, int index)
>> +{
>> +	const struct of_device_id *match;
>> +	struct device_node *np;
>> +	ti_of_clk_init_cb_t clk_init_cb;
>> +	struct clk_init_item *retry;
>> +	struct clk_init_item *tmp;
>> +	int ret;
>> +
>> +	ti_dt_clk_regmap_index = index;
>> +
>> +	for_each_child_of_node(parent, np) {
>> +		match = of_match_node(__clk_of_table, np);
>> +		if (!match)
>> +			continue;
>> +		clk_init_cb = (ti_of_clk_init_cb_t)match->data;
>> +		pr_debug("%s: initializing: %s\n", __func__, np->name);
>> +		ret = clk_init_cb(np);
>> +		if (ret == -EAGAIN) {
>> +			pr_debug("%s: adding to again list...\n", np->name);
>> +			retry = kzalloc(sizeof(*retry), GFP_KERNEL);
>> +			retry->np = np;
>> +			retry->init_cb = clk_init_cb;
>> +			list_add(&retry->node, &retry_list);
>> +		} else if (ret) {
>> +			pr_err("%s: clock init failed for %s (%d)!\n", __func__,
>> +			       np->name, ret);
>> +		}
>> +	}
>> +
>> +	list_for_each_entry_safe(retry, tmp, &retry_list, node) {
>> +		pr_debug("%s: retry-init: %s\n", __func__, retry->np->name);
>> +		ti_dt_clk_regmap_index = retry->index;
>> +		ret = retry->init_cb(retry->np);
>> +		if (ret == -EAGAIN) {
>> +			pr_debug("%s failed again?\n", retry->np->name);
>
> This is presumably a serious error condition and should be a pr_warn() or
> pr_err(), right?

Not a serious, I think this can happen still if we have dependencies 
towards clocks from other IP blocks which provide clocks (e.g. DPLL uses 
source clocks from both PRM + CM IPs.)

> If retry_list won't be walked again, then it seems best to delete and free
> the list_entry no matter what the return value is from retry->init_cb(),
> since it's not like it will be retried.  Otherwise the code will leak
> memory.

It is actually retried, once the next IP block does its init.

-Tero

>
>> +		} else {
>> +			if (ret)
>> +				pr_err("%s: clock init failed for %s (%d)!\n",
>> +				       __func__, retry->np->name, ret);
>> +			list_del(&retry->node);
>> +			kfree(retry);
>> +		}
>> +	}
>> +}
>> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
>> index df94c24..d6bf530 100644
>> --- a/include/linux/clk/ti.h
>> +++ b/include/linux/clk/ti.h
>> @@ -36,7 +36,21 @@ struct ti_dt_clk {
>>   		.node_name = name,	\
>>   	}
>>
>> +/* Maximum number of clock regmaps */
>> +#define CLK_MAX_REGMAPS			4
>>
>> +/**
>> + * struct clk_omap_reg - OMAP register declaration
>> + * @offset: offset from the master IP module base address
>> + * @index: index of the master IP module
>> + */
>> +struct clk_omap_reg {
>> +	u16 offset;
>> +	u16 index;
>> +};
>> +
>> +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>>   void ti_dt_clocks_register(struct ti_dt_clk *oclks);
>> +void ti_dt_clk_init_provider(struct device_node *np, int index);
>>
>>   #endif
>> --
>> 1.7.9.5
>>
>
>
> - Paul
>

Re: [PATCHv10 03/41] CLK: ti: add init support for clock IP blocks

[Paul Walmsley]

On Tue, 17 Dec 2013, Tero Kristo wrote:

> On 12/17/2013 10:14 AM, Paul Walmsley wrote:
> > On Tue, 26 Nov 2013, Tero Kristo wrote:
> > 
> > > ti_dt_clk_init_provider() can now be used to initialize the contents of
> > > a single clock IP block. This parses all the clocks under the IP block
> > > and calls the corresponding init function for them.
> > > 
> > > This patch also introduces a helper function for the TI clock drivers
> > > to get register info from DT and append the master IP info to this.
> > > 
> > > Signed-off-by: Tero Kristo <t-kristo@ti.com>
> > 
> > ...
> > 
> > > diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
> > > index ef1a7cd..63f85e9 100644
> > > --- a/drivers/clk/ti/clk.c
> > > +++ b/drivers/clk/ti/clk.c
> > > @@ -19,10 +19,15 @@
> > >   #include <linux/clkdev.h>
> > >   #include <linux/clk/ti.h>
> > >   #include <linux/of.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/list.h>
> > > 
> > >   #undef pr_fmt
> > >   #define pr_fmt(fmt) "%s: " fmt, __func__
> > > 
> > > +extern struct of_device_id __clk_of_table[];
> > 
> > This results in a checkpatch.pl warning:
> > 
> > WARNING: externs should be avoided in .c files
> > #33: FILE: drivers/clk/ti/clk.c:28:
> > +extern struct of_device_id __clk_of_table[];
> 
> This extern is only needed from this single file, and this code is duplicated
> from drivers/clk/clk.c.

So the right thing to do here is to move it into a separate header file 
that both drivers/clk/clk.c and drivers/clk/ti/clk.c either already 
#include, or can add a new #include for.


- Paul

[PATCHv10 03/41] CLK: ti: add init support for clock IP blocks

[Paul Walmsley]

On Tue, 17 Dec 2013, Tero Kristo wrote:

> On 12/17/2013 10:14 AM, Paul Walmsley wrote:
> > On Tue, 26 Nov 2013, Tero Kristo wrote:
> > 
> > > ti_dt_clk_init_provider() can now be used to initialize the contents of
> > > a single clock IP block. This parses all the clocks under the IP block
> > > and calls the corresponding init function for them.
> > > 
> > > This patch also introduces a helper function for the TI clock drivers
> > > to get register info from DT and append the master IP info to this.
> > > 
> > > Signed-off-by: Tero Kristo <t-kristo@ti.com>
> > 
> > ...
> > 
> > > diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
> > > index ef1a7cd..63f85e9 100644
> > > --- a/drivers/clk/ti/clk.c
> > > +++ b/drivers/clk/ti/clk.c
> > > @@ -19,10 +19,15 @@
> > >   #include <linux/clkdev.h>
> > >   #include <linux/clk/ti.h>
> > >   #include <linux/of.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/list.h>
> > > 
> > >   #undef pr_fmt
> > >   #define pr_fmt(fmt) "%s: " fmt, __func__
> > > 
> > > +extern struct of_device_id __clk_of_table[];
> > 
> > This results in a checkpatch.pl warning:
> > 
> > WARNING: externs should be avoided in .c files
> > #33: FILE: drivers/clk/ti/clk.c:28:
> > +extern struct of_device_id __clk_of_table[];
> 
> This extern is only needed from this single file, and this code is duplicated
> from drivers/clk/clk.c.

So the right thing to do here is to move it into a separate header file 
that both drivers/clk/clk.c and drivers/clk/ti/clk.c either already 
#include, or can add a new #include for.


- Paul

[PATCHv10 04/41] CLK: TI: Add DPLL clock support

[Tero Kristo]

The OMAP clock driver now supports DPLL clock type. This patch also
adds support for DT DPLL nodes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/dpll.txt          |   75 +++
 arch/arm/mach-omap2/clock.h                        |  163 +-----
 arch/arm/mach-omap2/clock3xxx.h                    |    2 -
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/dpll.c                              |  597 ++++++++++++++++++++
 include/linux/clk/ti.h                             |  170 ++++++
 6 files changed, 844 insertions(+), 165 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/dpll.txt
 create mode 100644 drivers/clk/ti/dpll.c

diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
new file mode 100644
index 0000000..30bfdb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -0,0 +1,75 @@
+Binding for Texas Instruments DPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped DPLL with usually two selectable input clocks
+(reference clock and bypass clock), with digital phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) This binding has several
+sub-types, which effectively result in slightly different setup
+for the actual DPLL clock.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of:
+		"ti,omap3-dpll-clock",
+		"ti,omap3-dpll-core-clock",
+		"ti,omap3-dpll-per-clock",
+		"ti,omap3-dpll-per-j-type-clock",
+		"ti,omap4-dpll-clock",
+		"ti,omap4-dpll-x2-clock",
+		"ti,omap4-dpll-core-clock",
+		"ti,omap4-dpll-m4xen-clock",
+		"ti,omap4-dpll-j-type-clock",
+		"ti,am3-dpll-no-gate-clock",
+		"ti,am3-dpll-j-type-clock",
+		"ti,am3-dpll-no-gate-j-type-clock",
+		"ti,am3-dpll-clock",
+		"ti,am3-dpll-core-clock",
+		"ti,am3-dpll-x2-clock",
+
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks, first entry lists reference clock
+  and second entry bypass clock
+- reg : offsets for the register set for controlling the DPLL.
+  Registers are listed in following order:
+	"control" - contains the control register base address
+	"idlest" - contains the idle status register base address
+	"mult-div1" - contains the multiplier / divider register base address
+	"autoidle" - contains the autoidle register base address (optional)
+  ti,am3-* dpll types do not have autoidle register
+
+Optional properties:
+- DPLL mode setting - defining any one or more of the following overrides
+  default setting.
+	- ti,low-power-stop : DPLL supports low power stop mode, gating output
+	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
+	- ti,lock : DPLL locks in programmed rate
+
+Examples:
+	dpll_core_ck: dpll_core_ck@44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x490>, <0x45c>, <0x488>, <0x468>;
+	};
+
+	dpll2_ck: dpll2_ck@48004004 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		ti,low-power-stop;
+		ti,low-power-bypass;
+		ti,lock;
+		reg = <0x4>, <0x24>, <0x34>, <0x40>;
+	};
+
+	dpll_core_ck: dpll_core_ck@44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x90>, <0x5c>, <0x68>;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 82916cc..7ce0b7f 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
 
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
 
 struct omap_clk {
 	u16				cpu;
@@ -178,141 +179,6 @@ struct clksel {
 	const struct clksel_rate *rates;
 };
 
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @last_rounded_m4xen: cache of the last M4X result of
- *			omap4_dpll_regm4xen_round_rate()
- * @last_rounded_lpmode: cache of the last lpmode result of
- *			 omap4_dpll_lpmode_recalc()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
- * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
-	void __iomem		*mult_div1_reg;
-	u32			mult_mask;
-	u32			div1_mask;
-	struct clk		*clk_bypass;
-	struct clk		*clk_ref;
-	void __iomem		*control_reg;
-	u32			enable_mask;
-	unsigned long		last_rounded_rate;
-	u16			last_rounded_m;
-	u8			last_rounded_m4xen;
-	u8			last_rounded_lpmode;
-	u16			max_multiplier;
-	u8			last_rounded_n;
-	u8			min_divider;
-	u16			max_divider;
-	u8			modes;
-	void __iomem		*autoidle_reg;
-	void __iomem		*idlest_reg;
-	u32			autoidle_mask;
-	u32			freqsel_mask;
-	u32			idlest_mask;
-	u32			dco_mask;
-	u32			sddiv_mask;
-	u32			lpmode_mask;
-	u32			m4xen_mask;
-	u8			auto_recal_bit;
-	u8			recal_en_bit;
-	u8			recal_st_bit;
-	u8			flags;
-};
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 1)
-#define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2		(1 << 5)
-
-/**
- * struct clk_hw_omap - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- */
-
-struct clk_hw_omap_ops;
-
-struct clk_hw_omap {
-	struct clk_hw		hw;
-	struct list_head	node;
-	unsigned long		fixed_rate;
-	u8			fixed_div;
-	void __iomem		*enable_reg;
-	u8			enable_bit;
-	u8			flags;
-	void __iomem		*clksel_reg;
-	u32			clksel_mask;
-	const struct clksel	*clksel;
-	struct dpll_data	*dpll_data;
-	const char		*clkdm_name;
-	struct clockdomain	*clkdm;
-	const struct clk_hw_omap_ops	*ops;
-};
-
 struct clk_hw_omap_ops {
 	void			(*find_idlest)(struct clk_hw_omap *oclk,
 					void __iomem **idlest_reg,
@@ -348,36 +214,13 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
-#define DPLL_LOW_POWER_STOP	0x1
-#define DPLL_LOW_POWER_BYPASS	0x5
-#define DPLL_LOCKED		0x7
-
-/* DPLL Type and DCO Selection Flags */
-#define DPLL_J_TYPE		0x1
-
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
-			unsigned long *parent_rate);
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
-int omap3_noncore_dpll_enable(struct clk_hw *hw);
-void omap3_noncore_dpll_disable(struct clk_hw *hw);
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate);
 u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
 void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
 void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
-				    unsigned long parent_rate);
 int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk);
 void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
 void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
-				unsigned long parent_rate);
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
-				    unsigned long target_rate,
-				    unsigned long *parent_rate);
 
-void omap2_init_clk_clkdm(struct clk_hw *clk);
 void __init omap2_clk_disable_clkdm_control(void);
 
 /* clkt_clksel.c public functions */
@@ -396,7 +239,6 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
 extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
 extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
 
-u8 omap2_init_dpll_parent(struct clk_hw *hw);
 unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
 
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -408,7 +250,6 @@ void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
 void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 				void __iomem **idlest_reg,
 				u8 *idlest_bit, u8 *idlest_val);
-void omap2_init_clk_hw_omap_clocks(struct clk *clk);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
@@ -433,10 +274,8 @@ extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 extern struct clk dummy_ck;
 
-extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
 extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
index 8cd4b0a..dab90e2 100644
--- a/arch/arm/mach-omap2/clock3xxx.h
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -9,8 +9,6 @@
 #define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
 
 int omap3xxx_clk_init(void);
-int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
-					unsigned long parent_rate);
 int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
 					unsigned long parent_rate);
 void omap3_clk_lock_dpll5(void);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 1825f7f..05af5d8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o
+obj-y					+= clk.o dpll.o
 endif
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
new file mode 100644
index 0000000..921a409
--- /dev/null
+++ b/drivers/clk/ti/dpll.c
@@ -0,0 +1,597 @@
+/*
+ * OMAP DPLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#define DPLL_HAS_AUTOIDLE	0x1
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static const struct clk_ops dpll_m4xen_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap4_dpll_regm4xen_recalc,
+	.round_rate	= &omap4_dpll_regm4xen_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+#endif
+
+static const struct clk_ops dpll_core_ck_ops = {
+	.recalc_rate	= &omap3_dpll_recalc,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+
+#ifdef CONFIG_ARCH_OMAP3
+static const struct clk_ops omap3_dpll_core_ck_ops = {
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+#endif
+
+static const struct clk_ops dpll_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+
+static const struct clk_ops dpll_no_gate_ck_ops = {
+	.recalc_rate	= &omap3_dpll_recalc,
+	.get_parent	= &omap2_init_dpll_parent,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+};
+
+#ifdef CONFIG_ARCH_OMAP3
+static const struct clk_ops omap3_dpll_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+
+static const struct clk_ops omap3_dpll_per_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.set_rate	= &omap3_dpll4_set_rate,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+#endif
+
+static const struct clk_ops dpll_x2_ck_ops = {
+	.recalc_rate	= &omap3_clkoutx2_recalc,
+};
+
+/**
+ * ti_clk_register_dpll() - Registers the DPLL clock
+ * @name:	Name of the clock node
+ * @parent_names: list of parent names
+ * @num_parents: num of parents in parent_names
+ * @flags:	init flags
+ * @dpll_data:	DPLL data
+ * @ops:	ops for DPLL
+ */
+static struct clk *ti_clk_register_dpll(const char *name,
+					const char **parent_names,
+					int num_parents, unsigned long flags,
+					struct dpll_data *dpll_data,
+					const struct clk_ops *ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+
+	/* allocate the divider */
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return ERR_PTR(-ENOMEM);
+
+	clk_hw->dpll_data = dpll_data;
+	clk_hw->ops = &clkhwops_omap3_dpll;
+	clk_hw->hw.init = &init;
+	clk_hw->flags = REGMAP_ADDRESSING;
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	/* register the clock */
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (IS_ERR(clk)) {
+		pr_err("failed clk_register for %s (%ld)\n", name,
+		       PTR_ERR(clk));
+		kfree(clk_hw);
+	} else {
+		omap2_init_clk_hw_omap_clocks(clk);
+	}
+
+	return clk;
+}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX)
+/**
+ * ti_clk_register_dpll_x2 -  Registers the DPLLx2 clock
+ * @node: device node for this clock
+ * @ops: clk_ops for this clock
+ * @hw_ops: clk_hw_ops for this clock
+ */
+static struct clk *ti_clk_register_dpll_x2(struct device_node *node,
+					   const struct clk_ops *ops,
+					   const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *name = node->name;
+	const char *parent_name;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s must have parent\n", node->name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return ERR_PTR(-ENOMEM);
+
+	clk_hw->ops = hw_ops;
+	clk_hw->hw.init = &init;
+
+	init.name = name;
+	init.ops = ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	/* register the clock */
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (IS_ERR(clk))
+		kfree(clk_hw);
+	else
+		omap2_init_clk_hw_omap_clocks(clk);
+
+	return clk;
+}
+#endif
+
+/**
+ * of_ti_dpll_setup - Setup function for OMAP DPLL clocks
+ *
+ * @node: device node containing the DPLL info
+ * @ops: ops for the DPLL
+ * @ddt: DPLL data template to use
+ * @init_flags: flags for controlling init types
+ */
+static int __init of_ti_dpll_setup(struct device_node *node,
+				    const struct clk_ops *ops,
+				    const struct dpll_data *ddt,
+				    u8 init_flags)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	int num_parents;
+	const char **parent_names = NULL;
+	u8 dpll_flags = 0;
+	struct dpll_data *dd;
+	int i;
+	u8 dpll_mode = 0;
+	int ret = 0;
+
+	dd = kzalloc(sizeof(*dd), GFP_KERNEL);
+	if (!dd)
+		return -ENOMEM;
+
+	memcpy(dd, ddt, sizeof(*dd));
+
+	num_parents = of_clk_get_parent_count(node);
+	if (num_parents < 1) {
+		pr_err("%s must have parent(s)\n", clk_name);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
+	if (!parent_names) {
+		ret = -ENOMEM;
+		goto cleanup;
+	}
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	dd->clk_ref = of_clk_get(node, 0);
+	dd->clk_bypass = of_clk_get(node, 1);
+
+	if (IS_ERR(dd->clk_ref)) {
+		ret = -EAGAIN;
+		goto cleanup;
+	}
+
+	if (IS_ERR(dd->clk_bypass)) {
+		ret = -EAGAIN;
+		goto cleanup;
+	}
+
+	dd->control_reg = ti_clk_get_reg_addr(node, 0);
+	dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
+	dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
+
+	if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg)
+		goto cleanup;
+
+	if (init_flags & DPLL_HAS_AUTOIDLE) {
+		dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
+		if (!dd->autoidle_reg)
+			goto cleanup;
+	}
+
+	if (of_property_read_bool(node, "ti,low-power-stop"))
+		dpll_mode |= 1 << DPLL_LOW_POWER_STOP;
+
+	if (of_property_read_bool(node, "ti,low-power-bypass"))
+		dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS;
+
+	if (of_property_read_bool(node, "ti,lock"))
+		dpll_mode |= 1 << DPLL_LOCKED;
+
+	if (dpll_mode)
+		dd->modes = dpll_mode;
+
+	clk = ti_clk_register_dpll(clk_name, parent_names, num_parents,
+				   dpll_flags, dd, ops);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+
+cleanup:
+	kfree(dd);
+	kfree(parent_names);
+	return ret;
+}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static int __init of_ti_omap4_dpll_x2_setup(struct device_node *node)
+{
+	struct clk *clk;
+
+	clk = ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops,
+				      &clkhwops_omap4_dpllmx);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+}
+CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock",
+	       of_ti_omap4_dpll_x2_setup);
+#endif
+
+#ifdef CONFIG_SOC_AM33XX
+static int __init of_ti_am3_dpll_x2_setup(struct device_node *node)
+{
+	struct clk *clk;
+
+	clk = ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+}
+CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock",
+	       of_ti_am3_dpll_x2_setup);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static int __init of_ti_omap3_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf0,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock",
+	       of_ti_omap3_dpll_setup);
+
+static int __init of_ti_omap3_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 16,
+		.div1_mask = 0x7f << 8,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf0,
+	};
+
+	return of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock",
+	       of_ti_omap3_core_dpll_setup);
+
+static int __init of_ti_omap3_per_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1 << 1,
+		.enable_mask = 0x7 << 16,
+		.autoidle_mask = 0x7 << 3,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf00000,
+		.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock",
+	       of_ti_omap3_per_dpll_setup);
+
+static int __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1 << 1,
+		.enable_mask = 0x7 << 16,
+		.autoidle_mask = 0x7 << 3,
+		.mult_mask = 0xfff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 4095,
+		.max_divider = 128,
+		.min_divider = 1,
+		.sddiv_mask = 0xff << 24,
+		.dco_mask = 0xe << 20,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock",
+	       of_ti_omap3_per_jtype_dpll_setup);
+#endif
+
+static int __init of_ti_omap4_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock",
+	       of_ti_omap4_dpll_setup);
+
+static int __init of_ti_omap4_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock",
+	       of_ti_omap4_core_dpll_setup);
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static int __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.m4xen_mask = 0x800,
+		.lpmode_mask = 1 << 10,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock",
+	       of_ti_omap4_m4xen_dpll_setup);
+
+static int __init of_ti_omap4_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0xfff << 8,
+		.div1_mask = 0xff,
+		.max_multiplier = 4095,
+		.max_divider = 256,
+		.min_divider = 1,
+		.sddiv_mask = 0xff << 24,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock",
+	       of_ti_omap4_jtype_dpll_setup);
+#endif
+
+static int __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock",
+	       of_ti_am3_no_gate_dpll_setup);
+
+static int __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 4095,
+		.max_divider = 256,
+		.min_divider = 2,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock",
+	       of_ti_am3_jtype_dpll_setup);
+
+static int __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock,
+	       "ti,am3-dpll-no-gate-j-type-clock",
+	       of_ti_am3_no_gate_jtype_dpll_setup);
+
+static int __init of_ti_am3_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup);
+
+static int __init of_ti_am3_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock",
+	       of_ti_am3_core_dpll_setup);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index d6bf530..fe32294 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -18,6 +18,153 @@
 #include <linux/clkdev.h>
 
 /**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @last_rounded_m4xen: cache of the last M4X result of
+ *			omap4_dpll_regm4xen_round_rate()
+ * @last_rounded_lpmode: cache of the last lpmode result of
+ *			 omap4_dpll_lpmode_recalc()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
+ * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+	struct clk		*clk_bypass;
+	struct clk		*clk_ref;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	unsigned long		last_rounded_rate;
+	u16			last_rounded_m;
+	u8			last_rounded_m4xen;
+	u8			last_rounded_lpmode;
+	u16			max_multiplier;
+	u8			last_rounded_n;
+	u8			min_divider;
+	u16			max_divider;
+	u8			modes;
+	void __iomem		*autoidle_reg;
+	void __iomem		*idlest_reg;
+	u32			autoidle_mask;
+	u32			freqsel_mask;
+	u32			idlest_mask;
+	u32			dco_mask;
+	u32			sddiv_mask;
+	u32			lpmode_mask;
+	u32			m4xen_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+	u8			flags;
+};
+
+struct clk_hw_omap_ops;
+
+/**
+ * struct clk_hw_omap - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @ops: clock ops for this clock
+ */
+struct clk_hw_omap {
+	struct clk_hw		hw;
+	struct list_head	node;
+	unsigned long		fixed_rate;
+	u8			fixed_div;
+	void __iomem		*enable_reg;
+	u8			enable_bit;
+	u8			flags;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	struct dpll_data	*dpll_data;
+	const char		*clkdm_name;
+	struct clockdomain	*clkdm;
+	const struct clk_hw_omap_ops	*ops;
+};
+
+/*
+ * struct clk_hw_omap.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
+ *     with 32bit ops, by default OMAP1 uses 16bit ops.
+ * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
+ * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
+ *     clock is put to no-idle mode.
+ * ENABLE_ON_INIT: Clock is enabled on init.
+ * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
+ *     disable. This inverts the behavior making '0' enable and '1' disable.
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ * REGMAP_ADDRESSING: Use regmap addressing to access clock registers.
+ */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2		(1 << 5)
+#define REGMAP_ADDRESSING	(1 << 6)
+
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP	0x1
+#define DPLL_LOW_POWER_BYPASS	0x5
+#define DPLL_LOCKED		0x7
+
+/* DPLL Type and DCO Selection Flags */
+#define DPLL_J_TYPE		0x1
+
+/**
  * struct ti_dt_clk - OMAP DT clock alias declarations
  * @lk: clock lookup definition
  * @node_name: clock DT node to map to
@@ -49,8 +196,31 @@ struct clk_omap_reg {
 	u16 index;
 };
 
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+					 unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+				    unsigned long target_rate,
+				    unsigned long *parent_rate);
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+			   unsigned long *parent_rate);
+void omap2_init_clk_clkdm(struct clk_hw *clk);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+			 unsigned long parent_rate);
+
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
 
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+
 #endif
-- 
1.7.9.5

[PATCHv10 04/41] CLK: TI: Add DPLL clock support

[Tero Kristo]

The OMAP clock driver now supports DPLL clock type. This patch also
adds support for DT DPLL nodes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/dpll.txt          |   75 +++
 arch/arm/mach-omap2/clock.h                        |  163 +-----
 arch/arm/mach-omap2/clock3xxx.h                    |    2 -
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/dpll.c                              |  597 ++++++++++++++++++++
 include/linux/clk/ti.h                             |  170 ++++++
 6 files changed, 844 insertions(+), 165 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/dpll.txt
 create mode 100644 drivers/clk/ti/dpll.c

diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
new file mode 100644
index 0000000..30bfdb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -0,0 +1,75 @@
+Binding for Texas Instruments DPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped DPLL with usually two selectable input clocks
+(reference clock and bypass clock), with digital phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) This binding has several
+sub-types, which effectively result in slightly different setup
+for the actual DPLL clock.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of:
+		"ti,omap3-dpll-clock",
+		"ti,omap3-dpll-core-clock",
+		"ti,omap3-dpll-per-clock",
+		"ti,omap3-dpll-per-j-type-clock",
+		"ti,omap4-dpll-clock",
+		"ti,omap4-dpll-x2-clock",
+		"ti,omap4-dpll-core-clock",
+		"ti,omap4-dpll-m4xen-clock",
+		"ti,omap4-dpll-j-type-clock",
+		"ti,am3-dpll-no-gate-clock",
+		"ti,am3-dpll-j-type-clock",
+		"ti,am3-dpll-no-gate-j-type-clock",
+		"ti,am3-dpll-clock",
+		"ti,am3-dpll-core-clock",
+		"ti,am3-dpll-x2-clock",
+
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks, first entry lists reference clock
+  and second entry bypass clock
+- reg : offsets for the register set for controlling the DPLL.
+  Registers are listed in following order:
+	"control" - contains the control register base address
+	"idlest" - contains the idle status register base address
+	"mult-div1" - contains the multiplier / divider register base address
+	"autoidle" - contains the autoidle register base address (optional)
+  ti,am3-* dpll types do not have autoidle register
+
+Optional properties:
+- DPLL mode setting - defining any one or more of the following overrides
+  default setting.
+	- ti,low-power-stop : DPLL supports low power stop mode, gating output
+	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
+	- ti,lock : DPLL locks in programmed rate
+
+Examples:
+	dpll_core_ck: dpll_core_ck at 44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x490>, <0x45c>, <0x488>, <0x468>;
+	};
+
+	dpll2_ck: dpll2_ck at 48004004 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		ti,low-power-stop;
+		ti,low-power-bypass;
+		ti,lock;
+		reg = <0x4>, <0x24>, <0x34>, <0x40>;
+	};
+
+	dpll_core_ck: dpll_core_ck at 44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x90>, <0x5c>, <0x68>;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 82916cc..7ce0b7f 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
 
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
 
 struct omap_clk {
 	u16				cpu;
@@ -178,141 +179,6 @@ struct clksel {
 	const struct clksel_rate *rates;
 };
 
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @last_rounded_m4xen: cache of the last M4X result of
- *			omap4_dpll_regm4xen_round_rate()
- * @last_rounded_lpmode: cache of the last lpmode result of
- *			 omap4_dpll_lpmode_recalc()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
- * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
-	void __iomem		*mult_div1_reg;
-	u32			mult_mask;
-	u32			div1_mask;
-	struct clk		*clk_bypass;
-	struct clk		*clk_ref;
-	void __iomem		*control_reg;
-	u32			enable_mask;
-	unsigned long		last_rounded_rate;
-	u16			last_rounded_m;
-	u8			last_rounded_m4xen;
-	u8			last_rounded_lpmode;
-	u16			max_multiplier;
-	u8			last_rounded_n;
-	u8			min_divider;
-	u16			max_divider;
-	u8			modes;
-	void __iomem		*autoidle_reg;
-	void __iomem		*idlest_reg;
-	u32			autoidle_mask;
-	u32			freqsel_mask;
-	u32			idlest_mask;
-	u32			dco_mask;
-	u32			sddiv_mask;
-	u32			lpmode_mask;
-	u32			m4xen_mask;
-	u8			auto_recal_bit;
-	u8			recal_en_bit;
-	u8			recal_st_bit;
-	u8			flags;
-};
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 1)
-#define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2		(1 << 5)
-
-/**
- * struct clk_hw_omap - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- */
-
-struct clk_hw_omap_ops;
-
-struct clk_hw_omap {
-	struct clk_hw		hw;
-	struct list_head	node;
-	unsigned long		fixed_rate;
-	u8			fixed_div;
-	void __iomem		*enable_reg;
-	u8			enable_bit;
-	u8			flags;
-	void __iomem		*clksel_reg;
-	u32			clksel_mask;
-	const struct clksel	*clksel;
-	struct dpll_data	*dpll_data;
-	const char		*clkdm_name;
-	struct clockdomain	*clkdm;
-	const struct clk_hw_omap_ops	*ops;
-};
-
 struct clk_hw_omap_ops {
 	void			(*find_idlest)(struct clk_hw_omap *oclk,
 					void __iomem **idlest_reg,
@@ -348,36 +214,13 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
-#define DPLL_LOW_POWER_STOP	0x1
-#define DPLL_LOW_POWER_BYPASS	0x5
-#define DPLL_LOCKED		0x7
-
-/* DPLL Type and DCO Selection Flags */
-#define DPLL_J_TYPE		0x1
-
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
-			unsigned long *parent_rate);
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
-int omap3_noncore_dpll_enable(struct clk_hw *hw);
-void omap3_noncore_dpll_disable(struct clk_hw *hw);
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate);
 u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
 void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
 void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
-				    unsigned long parent_rate);
 int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk);
 void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
 void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
-				unsigned long parent_rate);
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
-				    unsigned long target_rate,
-				    unsigned long *parent_rate);
 
-void omap2_init_clk_clkdm(struct clk_hw *clk);
 void __init omap2_clk_disable_clkdm_control(void);
 
 /* clkt_clksel.c public functions */
@@ -396,7 +239,6 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
 extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
 extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
 
-u8 omap2_init_dpll_parent(struct clk_hw *hw);
 unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
 
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -408,7 +250,6 @@ void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
 void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 				void __iomem **idlest_reg,
 				u8 *idlest_bit, u8 *idlest_val);
-void omap2_init_clk_hw_omap_clocks(struct clk *clk);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
@@ -433,10 +274,8 @@ extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 extern struct clk dummy_ck;
 
-extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
 extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
index 8cd4b0a..dab90e2 100644
--- a/arch/arm/mach-omap2/clock3xxx.h
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -9,8 +9,6 @@
 #define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
 
 int omap3xxx_clk_init(void);
-int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
-					unsigned long parent_rate);
 int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
 					unsigned long parent_rate);
 void omap3_clk_lock_dpll5(void);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 1825f7f..05af5d8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o
+obj-y					+= clk.o dpll.o
 endif
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
new file mode 100644
index 0000000..921a409
--- /dev/null
+++ b/drivers/clk/ti/dpll.c
@@ -0,0 +1,597 @@
+/*
+ * OMAP DPLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#define DPLL_HAS_AUTOIDLE	0x1
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static const struct clk_ops dpll_m4xen_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap4_dpll_regm4xen_recalc,
+	.round_rate	= &omap4_dpll_regm4xen_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+#endif
+
+static const struct clk_ops dpll_core_ck_ops = {
+	.recalc_rate	= &omap3_dpll_recalc,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+
+#ifdef CONFIG_ARCH_OMAP3
+static const struct clk_ops omap3_dpll_core_ck_ops = {
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+#endif
+
+static const struct clk_ops dpll_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+
+static const struct clk_ops dpll_no_gate_ck_ops = {
+	.recalc_rate	= &omap3_dpll_recalc,
+	.get_parent	= &omap2_init_dpll_parent,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+};
+
+#ifdef CONFIG_ARCH_OMAP3
+static const struct clk_ops omap3_dpll_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+
+static const struct clk_ops omap3_dpll_per_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.set_rate	= &omap3_dpll4_set_rate,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+#endif
+
+static const struct clk_ops dpll_x2_ck_ops = {
+	.recalc_rate	= &omap3_clkoutx2_recalc,
+};
+
+/**
+ * ti_clk_register_dpll() - Registers the DPLL clock
+ * @name:	Name of the clock node
+ * @parent_names: list of parent names
+ * @num_parents: num of parents in parent_names
+ * @flags:	init flags
+ * @dpll_data:	DPLL data
+ * @ops:	ops for DPLL
+ */
+static struct clk *ti_clk_register_dpll(const char *name,
+					const char **parent_names,
+					int num_parents, unsigned long flags,
+					struct dpll_data *dpll_data,
+					const struct clk_ops *ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+
+	/* allocate the divider */
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return ERR_PTR(-ENOMEM);
+
+	clk_hw->dpll_data = dpll_data;
+	clk_hw->ops = &clkhwops_omap3_dpll;
+	clk_hw->hw.init = &init;
+	clk_hw->flags = REGMAP_ADDRESSING;
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	/* register the clock */
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (IS_ERR(clk)) {
+		pr_err("failed clk_register for %s (%ld)\n", name,
+		       PTR_ERR(clk));
+		kfree(clk_hw);
+	} else {
+		omap2_init_clk_hw_omap_clocks(clk);
+	}
+
+	return clk;
+}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX)
+/**
+ * ti_clk_register_dpll_x2 -  Registers the DPLLx2 clock
+ * @node: device node for this clock
+ * @ops: clk_ops for this clock
+ * @hw_ops: clk_hw_ops for this clock
+ */
+static struct clk *ti_clk_register_dpll_x2(struct device_node *node,
+					   const struct clk_ops *ops,
+					   const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *name = node->name;
+	const char *parent_name;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s must have parent\n", node->name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return ERR_PTR(-ENOMEM);
+
+	clk_hw->ops = hw_ops;
+	clk_hw->hw.init = &init;
+
+	init.name = name;
+	init.ops = ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	/* register the clock */
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (IS_ERR(clk))
+		kfree(clk_hw);
+	else
+		omap2_init_clk_hw_omap_clocks(clk);
+
+	return clk;
+}
+#endif
+
+/**
+ * of_ti_dpll_setup - Setup function for OMAP DPLL clocks
+ *
+ * @node: device node containing the DPLL info
+ * @ops: ops for the DPLL
+ * @ddt: DPLL data template to use
+ * @init_flags: flags for controlling init types
+ */
+static int __init of_ti_dpll_setup(struct device_node *node,
+				    const struct clk_ops *ops,
+				    const struct dpll_data *ddt,
+				    u8 init_flags)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	int num_parents;
+	const char **parent_names = NULL;
+	u8 dpll_flags = 0;
+	struct dpll_data *dd;
+	int i;
+	u8 dpll_mode = 0;
+	int ret = 0;
+
+	dd = kzalloc(sizeof(*dd), GFP_KERNEL);
+	if (!dd)
+		return -ENOMEM;
+
+	memcpy(dd, ddt, sizeof(*dd));
+
+	num_parents = of_clk_get_parent_count(node);
+	if (num_parents < 1) {
+		pr_err("%s must have parent(s)\n", clk_name);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
+	if (!parent_names) {
+		ret = -ENOMEM;
+		goto cleanup;
+	}
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	dd->clk_ref = of_clk_get(node, 0);
+	dd->clk_bypass = of_clk_get(node, 1);
+
+	if (IS_ERR(dd->clk_ref)) {
+		ret = -EAGAIN;
+		goto cleanup;
+	}
+
+	if (IS_ERR(dd->clk_bypass)) {
+		ret = -EAGAIN;
+		goto cleanup;
+	}
+
+	dd->control_reg = ti_clk_get_reg_addr(node, 0);
+	dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
+	dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
+
+	if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg)
+		goto cleanup;
+
+	if (init_flags & DPLL_HAS_AUTOIDLE) {
+		dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
+		if (!dd->autoidle_reg)
+			goto cleanup;
+	}
+
+	if (of_property_read_bool(node, "ti,low-power-stop"))
+		dpll_mode |= 1 << DPLL_LOW_POWER_STOP;
+
+	if (of_property_read_bool(node, "ti,low-power-bypass"))
+		dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS;
+
+	if (of_property_read_bool(node, "ti,lock"))
+		dpll_mode |= 1 << DPLL_LOCKED;
+
+	if (dpll_mode)
+		dd->modes = dpll_mode;
+
+	clk = ti_clk_register_dpll(clk_name, parent_names, num_parents,
+				   dpll_flags, dd, ops);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+
+cleanup:
+	kfree(dd);
+	kfree(parent_names);
+	return ret;
+}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static int __init of_ti_omap4_dpll_x2_setup(struct device_node *node)
+{
+	struct clk *clk;
+
+	clk = ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops,
+				      &clkhwops_omap4_dpllmx);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+}
+CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock",
+	       of_ti_omap4_dpll_x2_setup);
+#endif
+
+#ifdef CONFIG_SOC_AM33XX
+static int __init of_ti_am3_dpll_x2_setup(struct device_node *node)
+{
+	struct clk *clk;
+
+	clk = ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+}
+CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock",
+	       of_ti_am3_dpll_x2_setup);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static int __init of_ti_omap3_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf0,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock",
+	       of_ti_omap3_dpll_setup);
+
+static int __init of_ti_omap3_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 16,
+		.div1_mask = 0x7f << 8,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf0,
+	};
+
+	return of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock",
+	       of_ti_omap3_core_dpll_setup);
+
+static int __init of_ti_omap3_per_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1 << 1,
+		.enable_mask = 0x7 << 16,
+		.autoidle_mask = 0x7 << 3,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf00000,
+		.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock",
+	       of_ti_omap3_per_dpll_setup);
+
+static int __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1 << 1,
+		.enable_mask = 0x7 << 16,
+		.autoidle_mask = 0x7 << 3,
+		.mult_mask = 0xfff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 4095,
+		.max_divider = 128,
+		.min_divider = 1,
+		.sddiv_mask = 0xff << 24,
+		.dco_mask = 0xe << 20,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock",
+	       of_ti_omap3_per_jtype_dpll_setup);
+#endif
+
+static int __init of_ti_omap4_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock",
+	       of_ti_omap4_dpll_setup);
+
+static int __init of_ti_omap4_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock",
+	       of_ti_omap4_core_dpll_setup);
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static int __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.m4xen_mask = 0x800,
+		.lpmode_mask = 1 << 10,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock",
+	       of_ti_omap4_m4xen_dpll_setup);
+
+static int __init of_ti_omap4_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0xfff << 8,
+		.div1_mask = 0xff,
+		.max_multiplier = 4095,
+		.max_divider = 256,
+		.min_divider = 1,
+		.sddiv_mask = 0xff << 24,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd,
+				DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock",
+	       of_ti_omap4_jtype_dpll_setup);
+#endif
+
+static int __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock",
+	       of_ti_am3_no_gate_dpll_setup);
+
+static int __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 4095,
+		.max_divider = 256,
+		.min_divider = 2,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock",
+	       of_ti_am3_jtype_dpll_setup);
+
+static int __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock,
+	       "ti,am3-dpll-no-gate-j-type-clock",
+	       of_ti_am3_no_gate_jtype_dpll_setup);
+
+static int __init of_ti_am3_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup);
+
+static int __init of_ti_am3_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	return of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock",
+	       of_ti_am3_core_dpll_setup);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index d6bf530..fe32294 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -18,6 +18,153 @@
 #include <linux/clkdev.h>
 
 /**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @last_rounded_m4xen: cache of the last M4X result of
+ *			omap4_dpll_regm4xen_round_rate()
+ * @last_rounded_lpmode: cache of the last lpmode result of
+ *			 omap4_dpll_lpmode_recalc()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
+ * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+	struct clk		*clk_bypass;
+	struct clk		*clk_ref;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	unsigned long		last_rounded_rate;
+	u16			last_rounded_m;
+	u8			last_rounded_m4xen;
+	u8			last_rounded_lpmode;
+	u16			max_multiplier;
+	u8			last_rounded_n;
+	u8			min_divider;
+	u16			max_divider;
+	u8			modes;
+	void __iomem		*autoidle_reg;
+	void __iomem		*idlest_reg;
+	u32			autoidle_mask;
+	u32			freqsel_mask;
+	u32			idlest_mask;
+	u32			dco_mask;
+	u32			sddiv_mask;
+	u32			lpmode_mask;
+	u32			m4xen_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+	u8			flags;
+};
+
+struct clk_hw_omap_ops;
+
+/**
+ * struct clk_hw_omap - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @ops: clock ops for this clock
+ */
+struct clk_hw_omap {
+	struct clk_hw		hw;
+	struct list_head	node;
+	unsigned long		fixed_rate;
+	u8			fixed_div;
+	void __iomem		*enable_reg;
+	u8			enable_bit;
+	u8			flags;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	struct dpll_data	*dpll_data;
+	const char		*clkdm_name;
+	struct clockdomain	*clkdm;
+	const struct clk_hw_omap_ops	*ops;
+};
+
+/*
+ * struct clk_hw_omap.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
+ *     with 32bit ops, by default OMAP1 uses 16bit ops.
+ * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
+ * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
+ *     clock is put to no-idle mode.
+ * ENABLE_ON_INIT: Clock is enabled on init.
+ * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
+ *     disable. This inverts the behavior making '0' enable and '1' disable.
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ * REGMAP_ADDRESSING: Use regmap addressing to access clock registers.
+ */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2		(1 << 5)
+#define REGMAP_ADDRESSING	(1 << 6)
+
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP	0x1
+#define DPLL_LOW_POWER_BYPASS	0x5
+#define DPLL_LOCKED		0x7
+
+/* DPLL Type and DCO Selection Flags */
+#define DPLL_J_TYPE		0x1
+
+/**
  * struct ti_dt_clk - OMAP DT clock alias declarations
  * @lk: clock lookup definition
  * @node_name: clock DT node to map to
@@ -49,8 +196,31 @@ struct clk_omap_reg {
 	u16 index;
 };
 
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+					 unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+				    unsigned long target_rate,
+				    unsigned long *parent_rate);
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+			   unsigned long *parent_rate);
+void omap2_init_clk_clkdm(struct clk_hw *clk);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+			 unsigned long parent_rate);
+
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
 
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+
 #endif
-- 
1.7.9.5

Re: [PATCHv10 04/41] CLK: TI: Add DPLL clock support

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> The OMAP clock driver now supports DPLL clock type. This patch also
> adds support for DT DPLL nodes.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> +/*
> + * struct clk_hw_omap.flags possibilities
> + *
> + * XXX document the rest of the clock flags here
> + *
> + * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
> + *     with 32bit ops, by default OMAP1 uses 16bit ops.
> + * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
> + * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
> + *     clock is put to no-idle mode.
> + * ENABLE_ON_INIT: Clock is enabled on init.
> + * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
> + *     disable. This inverts the behavior making '0' enable and '1' disable.
> + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
> + *     bits share the same register.  This flag allows the
> + *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
> + *     should be used.  This is a temporary solution - a better approach
> + *     would be to associate clock type-specific data with the clock,
> + *     similar to the struct dpll_data approach.
> + * REGMAP_ADDRESSING: Use regmap addressing to access clock registers.
> + */

Nice work adding the additional flag documentation here.


- Paul

[PATCHv10 04/41] CLK: TI: Add DPLL clock support

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> The OMAP clock driver now supports DPLL clock type. This patch also
> adds support for DT DPLL nodes.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> +/*
> + * struct clk_hw_omap.flags possibilities
> + *
> + * XXX document the rest of the clock flags here
> + *
> + * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
> + *     with 32bit ops, by default OMAP1 uses 16bit ops.
> + * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
> + * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
> + *     clock is put to no-idle mode.
> + * ENABLE_ON_INIT: Clock is enabled on init.
> + * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
> + *     disable. This inverts the behavior making '0' enable and '1' disable.
> + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
> + *     bits share the same register.  This flag allows the
> + *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
> + *     should be used.  This is a temporary solution - a better approach
> + *     would be to associate clock type-specific data with the clock,
> + *     similar to the struct dpll_data approach.
> + * REGMAP_ADDRESSING: Use regmap addressing to access clock registers.
> + */

Nice work adding the additional flag documentation here.


- Paul

Re: [PATCHv10 04/41] CLK: TI: Add DPLL clock support

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> The OMAP clock driver now supports DPLL clock type. This patch also
> adds support for DT DPLL nodes.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
> new file mode 100644
> index 0000000..921a409
> --- /dev/null
> +++ b/drivers/clk/ti/dpll.c
> @@ -0,0 +1,597 @@

...

> +/**
> + * of_ti_dpll_setup - Setup function for OMAP DPLL clocks
> + *
> + * @node: device node containing the DPLL info
> + * @ops: ops for the DPLL
> + * @ddt: DPLL data template to use
> + * @init_flags: flags for controlling init types
> + */

The kerneldoc-nano for this function isn't right.  The blank line
before the arguments should be removed.


- Paul

[PATCHv10 04/41] CLK: TI: Add DPLL clock support

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> The OMAP clock driver now supports DPLL clock type. This patch also
> adds support for DT DPLL nodes.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
> new file mode 100644
> index 0000000..921a409
> --- /dev/null
> +++ b/drivers/clk/ti/dpll.c
> @@ -0,0 +1,597 @@

...

> +/**
> + * of_ti_dpll_setup - Setup function for OMAP DPLL clocks
> + *
> + * @node: device node containing the DPLL info
> + * @ops: ops for the DPLL
> + * @ddt: DPLL data template to use
> + * @init_flags: flags for controlling init types
> + */

The kerneldoc-nano for this function isn't right.  The blank line
before the arguments should be removed.


- Paul

[PATCHv10 05/41] CLK: TI: add autoidle support

[Tero Kristo]

TI clk driver now routes some of the basic clocks through own
registration routine to allow autoidle support. This routine just
checks a couple of device node properties and adds autoidle support
if required, and just passes the registration forward to basic clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/autoidle.txt      |   39 ++++++
 arch/arm/mach-omap2/clock.c                        |    6 +
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/autoidle.c                          |  134 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    9 ++
 5 files changed, 189 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt
 create mode 100644 drivers/clk/ti/autoidle.c

diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
new file mode 100644
index 0000000..7c735dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
@@ -0,0 +1,39 @@
+Binding for Texas Instruments autoidle clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a register mapped
+clock which can be put to idle automatically by hardware based on the usage
+and a configuration bit setting. Autoidle clock is never an individual
+clock, it is always a derivative of some basic clock like a gate, divider,
+or fixed-factor.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- reg : offset for the register controlling the autoidle
+- ti,autoidle-shift : bit shift of the autoidle enable bit
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
+
+Examples:
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index c7c5d31..238be3f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -520,6 +520,9 @@ int omap2_clk_enable_autoidle_all(void)
 	list_for_each_entry(c, &clk_hw_omap_clocks, node)
 		if (c->ops && c->ops->allow_idle)
 			c->ops->allow_idle(c);
+
+	of_ti_clk_allow_autoidle_all();
+
 	return 0;
 }
 
@@ -539,6 +542,9 @@ int omap2_clk_disable_autoidle_all(void)
 	list_for_each_entry(c, &clk_hw_omap_clocks, node)
 		if (c->ops && c->ops->deny_idle)
 			c->ops->deny_idle(c);
+
+	of_ti_clk_deny_autoidle_all();
+
 	return 0;
 }
 
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 05af5d8..533efb4 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o
+obj-y					+= clk.o dpll.o autoidle.o
 endif
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
new file mode 100644
index 0000000..01c9250
--- /dev/null
+++ b/drivers/clk/ti/autoidle.c
@@ -0,0 +1,134 @@
+/*
+ * TI clock autoidle support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+struct clk_ti_autoidle {
+	void __iomem		*reg;
+	struct regmap		*regmap;
+	u8			shift;
+	u8			flags;
+	const char		*name;
+	struct list_head	node;
+};
+
+#define AUTOIDLE_LOW		0x1
+
+static LIST_HEAD(autoidle_clks);
+
+static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+{
+	u32 val;
+
+	val = clk_readl(clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val &= ~(1 << clk->shift);
+	else
+		val |= (1 << clk->shift);
+
+	clk_writel(val, clk->reg);
+}
+
+static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+{
+	u32 val;
+
+	val = clk_readl(clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val |= (1 << clk->shift);
+	else
+		val &= ~(1 << clk->shift);
+
+	clk_writel(val, clk->reg);
+}
+
+/**
+ * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ *
+ * Enables hardware autoidle for all registered DT clocks, which have
+ * the feature.
+ */
+void of_ti_clk_allow_autoidle_all(void)
+{
+	struct clk_ti_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		ti_allow_autoidle(c);
+}
+
+/**
+ * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ *
+ * Disables hardware autoidle for all registered DT clocks, which have
+ * the feature.
+ */
+void of_ti_clk_deny_autoidle_all(void)
+{
+	struct clk_ti_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		ti_deny_autoidle(c);
+}
+
+/**
+ * of_ti_clk_autoidle_setup - sets up hardware autoidle for a clock
+ * @node: pointer to the clock device node
+ *
+ * Checks if a clock has hardware autoidle support or not (check
+ * for presence of 'ti,autoidle-shift' property in the device tree
+ * node) and sets up the hardware autoidle feature for the clock
+ * if available. If autoidle is available, the clock is also added
+ * to the autoidle list for later processing. Returns 0 on success,
+ * negative error value on failure.
+ */
+int __init of_ti_clk_autoidle_setup(struct device_node *node)
+{
+	u32 shift;
+	struct clk_ti_autoidle *clk;
+
+	/* Check if this clock has autoidle support or not */
+	if (of_property_read_u32(node, "ti,autoidle-shift", &shift))
+		return 0;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+
+	if (!clk)
+		return -ENOMEM;
+
+	clk->shift = shift;
+	clk->name = node->name;
+	clk->reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!clk->reg) {
+		kfree(clk);
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(node, "ti,invert-autoidle-bit"))
+		clk->flags |= AUTOIDLE_LOW;
+
+	list_add(&clk->node, &autoidle_clks);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index fe32294..58a3c7e 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -219,6 +219,15 @@ int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+
+#ifdef CONFIG_OF
+void of_ti_clk_allow_autoidle_all(void);
+void of_ti_clk_deny_autoidle_all(void);
+#else
+static inline void of_ti_clk_allow_autoidle_all(void) { }
+static inline void of_ti_clk_deny_autoidle_all(void) { }
+#endif
 
 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
-- 
1.7.9.5

[PATCHv10 05/41] CLK: TI: add autoidle support

[Tero Kristo]

TI clk driver now routes some of the basic clocks through own
registration routine to allow autoidle support. This routine just
checks a couple of device node properties and adds autoidle support
if required, and just passes the registration forward to basic clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/autoidle.txt      |   39 ++++++
 arch/arm/mach-omap2/clock.c                        |    6 +
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/autoidle.c                          |  134 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    9 ++
 5 files changed, 189 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt
 create mode 100644 drivers/clk/ti/autoidle.c

diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
new file mode 100644
index 0000000..7c735dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
@@ -0,0 +1,39 @@
+Binding for Texas Instruments autoidle clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a register mapped
+clock which can be put to idle automatically by hardware based on the usage
+and a configuration bit setting. Autoidle clock is never an individual
+clock, it is always a derivative of some basic clock like a gate, divider,
+or fixed-factor.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- reg : offset for the register controlling the autoidle
+- ti,autoidle-shift : bit shift of the autoidle enable bit
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
+
+Examples:
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index c7c5d31..238be3f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -520,6 +520,9 @@ int omap2_clk_enable_autoidle_all(void)
 	list_for_each_entry(c, &clk_hw_omap_clocks, node)
 		if (c->ops && c->ops->allow_idle)
 			c->ops->allow_idle(c);
+
+	of_ti_clk_allow_autoidle_all();
+
 	return 0;
 }
 
@@ -539,6 +542,9 @@ int omap2_clk_disable_autoidle_all(void)
 	list_for_each_entry(c, &clk_hw_omap_clocks, node)
 		if (c->ops && c->ops->deny_idle)
 			c->ops->deny_idle(c);
+
+	of_ti_clk_deny_autoidle_all();
+
 	return 0;
 }
 
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 05af5d8..533efb4 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o
+obj-y					+= clk.o dpll.o autoidle.o
 endif
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
new file mode 100644
index 0000000..01c9250
--- /dev/null
+++ b/drivers/clk/ti/autoidle.c
@@ -0,0 +1,134 @@
+/*
+ * TI clock autoidle support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+struct clk_ti_autoidle {
+	void __iomem		*reg;
+	struct regmap		*regmap;
+	u8			shift;
+	u8			flags;
+	const char		*name;
+	struct list_head	node;
+};
+
+#define AUTOIDLE_LOW		0x1
+
+static LIST_HEAD(autoidle_clks);
+
+static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+{
+	u32 val;
+
+	val = clk_readl(clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val &= ~(1 << clk->shift);
+	else
+		val |= (1 << clk->shift);
+
+	clk_writel(val, clk->reg);
+}
+
+static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+{
+	u32 val;
+
+	val = clk_readl(clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val |= (1 << clk->shift);
+	else
+		val &= ~(1 << clk->shift);
+
+	clk_writel(val, clk->reg);
+}
+
+/**
+ * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ *
+ * Enables hardware autoidle for all registered DT clocks, which have
+ * the feature.
+ */
+void of_ti_clk_allow_autoidle_all(void)
+{
+	struct clk_ti_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		ti_allow_autoidle(c);
+}
+
+/**
+ * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ *
+ * Disables hardware autoidle for all registered DT clocks, which have
+ * the feature.
+ */
+void of_ti_clk_deny_autoidle_all(void)
+{
+	struct clk_ti_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		ti_deny_autoidle(c);
+}
+
+/**
+ * of_ti_clk_autoidle_setup - sets up hardware autoidle for a clock
+ * @node: pointer to the clock device node
+ *
+ * Checks if a clock has hardware autoidle support or not (check
+ * for presence of 'ti,autoidle-shift' property in the device tree
+ * node) and sets up the hardware autoidle feature for the clock
+ * if available. If autoidle is available, the clock is also added
+ * to the autoidle list for later processing. Returns 0 on success,
+ * negative error value on failure.
+ */
+int __init of_ti_clk_autoidle_setup(struct device_node *node)
+{
+	u32 shift;
+	struct clk_ti_autoidle *clk;
+
+	/* Check if this clock has autoidle support or not */
+	if (of_property_read_u32(node, "ti,autoidle-shift", &shift))
+		return 0;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+
+	if (!clk)
+		return -ENOMEM;
+
+	clk->shift = shift;
+	clk->name = node->name;
+	clk->reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!clk->reg) {
+		kfree(clk);
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(node, "ti,invert-autoidle-bit"))
+		clk->flags |= AUTOIDLE_LOW;
+
+	list_add(&clk->node, &autoidle_clks);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index fe32294..58a3c7e 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -219,6 +219,15 @@ int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+
+#ifdef CONFIG_OF
+void of_ti_clk_allow_autoidle_all(void);
+void of_ti_clk_deny_autoidle_all(void);
+#else
+static inline void of_ti_clk_allow_autoidle_all(void) { }
+static inline void of_ti_clk_deny_autoidle_all(void) { }
+#endif
 
 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
-- 
1.7.9.5

[PATCHv10 06/41] clk: ti: add composite clock support

[Tero Kristo]

This is a multipurpose clock node, which contains support for multiple
sub-clocks. Uses basic composite clock type to implement the actual
functionality, and TI specific gate, mux and divider clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/composite.txt     |   54 +++++
 arch/arm/mach-omap2/clock.h                        |    3 -
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/composite.c                         |  224 ++++++++++++++++++++
 include/linux/clk/ti.h                             |   12 ++
 5 files changed, 291 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/composite.txt
 create mode 100644 drivers/clk/ti/composite.c

diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
new file mode 100644
index 0000000..5f43c47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -0,0 +1,54 @@
+Binding for TI composite clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped composite clock with multiple different sub-types;
+
+a multiplexer clock with multiple input clock signals or parents, one
+of which can be selected as output, this behaves exactly as [2]
+
+an adjustable clock rate divider, this behaves exactly as [3]
+
+a gating function which can be used to enable and disable the output
+clock, this behaves exactly as [4]
+
+The binding must provide a list of the component clocks that shall be
+merged to this clock. The component clocks shall be of one of the
+"ti,*composite*-clock" types.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/mux.txt
+[3] Documentation/devicetree/bindings/clock/ti/divider.txt
+[4] Documentation/devicetree/bindings/clock/ti/gate.txt
+
+Required properties:
+- compatible : shall be: "ti,composite-clock"
+- clocks : link phandles of component clocks
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Examples:
+
+usb_l4_gate_ick: usb_l4_gate_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-interface-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <5>;
+	reg = <0x0a10>;
+};
+
+usb_l4_div_ick: usb_l4_div_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <4>;
+	ti,max-div = <1>;
+	reg = <0x0a40>;
+	ti,index-starts-at-one;
+};
+
+usb_l4_ick: usb_l4_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-clock";
+	clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 7ce0b7f..bc0f9fc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -241,9 +241,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
 
 unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
 
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
 				   void __iomem **other_reg,
 				   u8 *other_bit);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 533efb4..a4a7595 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o autoidle.o
+obj-y					+= clk.o dpll.o autoidle.o composite.o
 endif
diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c
new file mode 100644
index 0000000..6208071
--- /dev/null
+++ b/drivers/clk/ti/composite.c
@@ -0,0 +1,224 @@
+/*
+ * TI composite clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include <linux/list.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+static unsigned long ti_composite_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long ti_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	return -EINVAL;
+}
+
+static int ti_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	return -EINVAL;
+}
+
+static const struct clk_ops ti_composite_divider_ops = {
+	.recalc_rate	= &ti_composite_recalc_rate,
+	.round_rate	= &ti_composite_round_rate,
+	.set_rate	= &ti_composite_set_rate,
+};
+
+static const struct clk_ops ti_composite_gate_ops = {
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+struct component_clk {
+	int num_parents;
+	const char **parent_names;
+	struct device_node *node;
+	int type;
+	struct clk_hw *hw;
+	struct list_head link;
+};
+
+static const char * __initconst component_clk_types[] = {
+	"gate", "divider", "mux"
+};
+
+static LIST_HEAD(component_clks);
+
+static struct component_clk *_lookup_component(struct device_node *node, int i)
+{
+	int rc;
+	struct of_phandle_args clkspec;
+	struct component_clk *comp;
+
+	rc = of_parse_phandle_with_args(node, "clocks", "#clock-cells", i,
+					&clkspec);
+	if (rc)
+		return NULL;
+
+	list_for_each_entry(comp, &component_clks, link) {
+		if (comp->node == clkspec.np)
+			return comp;
+	}
+	return NULL;
+}
+
+static inline struct clk_hw *_get_hw(struct component_clk *clk)
+{
+	if (clk)
+		return clk->hw;
+
+	return NULL;
+}
+
+static int __init of_ti_composite_clk_setup(struct device_node *node)
+{
+	int num_clks;
+	int i;
+	struct clk *clk;
+	struct component_clk *comp;
+	struct component_clk *clks[CLK_COMPONENT_TYPE_MAX] = { NULL };
+	const char *name = node->name;
+	int num_parents = 0;
+	const char **parent_names = NULL;
+	int ret = 0;
+
+	/* Number of component clocks to be put inside this clock */
+	num_clks = of_clk_get_parent_count(node);
+
+	if (num_clks < 1) {
+		pr_err("composite clk %s must have component(s)\n", name);
+		return -EINVAL;
+	}
+
+	/* Check for presence of each component clock */
+	for (i = 0; i < num_clks; i++) {
+		comp = _lookup_component(node, i);
+		if (!comp)
+			return -EAGAIN;
+		if (clks[comp->type] != NULL) {
+			pr_err("duplicate component types for %s (%s)!\n",
+			       name, component_clk_types[comp->type]);
+			return -EINVAL;
+		}
+		clks[comp->type] = comp;
+	}
+
+	/* All components exists, proceed with registration */
+	for (i = 0; i < CLK_COMPONENT_TYPE_MAX; i++) {
+		if (!clks[i])
+			continue;
+		if (clks[i]->num_parents) {
+			num_parents = clks[i]->num_parents;
+			parent_names = clks[i]->parent_names;
+		}
+	}
+
+	if (!num_parents) {
+		pr_err("%s: no parents found for %s!\n", __func__,
+		       name);
+		return -EINVAL;
+	}
+
+	clk = clk_register_composite(NULL, name, parent_names, num_parents,
+				     _get_hw(clks[CLK_COMPONENT_TYPE_MUX]),
+				     &clk_mux_ops,
+				     _get_hw(clks[CLK_COMPONENT_TYPE_DIVIDER]),
+				     &ti_composite_divider_ops,
+				     _get_hw(clks[CLK_COMPONENT_TYPE_GATE]),
+				     &ti_composite_gate_ops, 0);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		goto cleanup;
+	}
+
+	ret = PTR_ERR(clk);
+cleanup:
+	/* Free component clock list entries */
+	for (i = 0; i < 3; i++) {
+		if (!clks[i])
+			continue;
+		list_del(&clks[i]->link);
+		kfree(clks[i]);
+	}
+
+	return ret;
+}
+CLK_OF_DECLARE(ti_composite_clock, "ti,composite-clock",
+	       of_ti_composite_clk_setup);
+
+/**
+ * ti_clk_add_component - add a component clock to the pool
+ * @node: device node of the component clock
+ * @hw: hardware clock definition for the component clock
+ * @type: type of the component clock
+ *
+ * Adds a component clock to the list of available components, so that
+ * it can be registered by a composite clock.
+ */
+int __init ti_clk_add_component(struct device_node *node, struct clk_hw *hw,
+				int type)
+{
+	int num_parents;
+	const char **parent_names;
+	struct component_clk *clk;
+	int i;
+
+	num_parents = of_clk_get_parent_count(node);
+
+	if (num_parents < 1) {
+		pr_err("component-clock %s must have parent(s)\n", node->name);
+		return -EINVAL;
+	}
+
+	parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL);
+	if (!parent_names)
+		return -ENOMEM;
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk) {
+		kfree(parent_names);
+		return -ENOMEM;
+	}
+
+	clk->num_parents = num_parents;
+	clk->parent_names = parent_names;
+	clk->hw = hw;
+	clk->node = node;
+	clk->type = type;
+	list_add(&clk->link, &component_clks);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 58a3c7e..155a7a4 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -164,6 +164,14 @@ struct clk_hw_omap {
 /* DPLL Type and DCO Selection Flags */
 #define DPLL_J_TYPE		0x1
 
+/* Composite clock component types */
+enum {
+	CLK_COMPONENT_TYPE_GATE = 0,
+	CLK_COMPONENT_TYPE_DIVIDER,
+	CLK_COMPONENT_TYPE_MUX,
+	CLK_COMPONENT_TYPE_MAX,
+};
+
 /**
  * struct ti_dt_clk - OMAP DT clock alias declarations
  * @lk: clock lookup definition
@@ -215,11 +223,15 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
 int of_ti_clk_autoidle_setup(struct device_node *node);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 06/41] clk: ti: add composite clock support

[Tero Kristo]

This is a multipurpose clock node, which contains support for multiple
sub-clocks. Uses basic composite clock type to implement the actual
functionality, and TI specific gate, mux and divider clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/composite.txt     |   54 +++++
 arch/arm/mach-omap2/clock.h                        |    3 -
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/composite.c                         |  224 ++++++++++++++++++++
 include/linux/clk/ti.h                             |   12 ++
 5 files changed, 291 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/composite.txt
 create mode 100644 drivers/clk/ti/composite.c

diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
new file mode 100644
index 0000000..5f43c47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -0,0 +1,54 @@
+Binding for TI composite clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped composite clock with multiple different sub-types;
+
+a multiplexer clock with multiple input clock signals or parents, one
+of which can be selected as output, this behaves exactly as [2]
+
+an adjustable clock rate divider, this behaves exactly as [3]
+
+a gating function which can be used to enable and disable the output
+clock, this behaves exactly as [4]
+
+The binding must provide a list of the component clocks that shall be
+merged to this clock. The component clocks shall be of one of the
+"ti,*composite*-clock" types.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/mux.txt
+[3] Documentation/devicetree/bindings/clock/ti/divider.txt
+[4] Documentation/devicetree/bindings/clock/ti/gate.txt
+
+Required properties:
+- compatible : shall be: "ti,composite-clock"
+- clocks : link phandles of component clocks
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Examples:
+
+usb_l4_gate_ick: usb_l4_gate_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-interface-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <5>;
+	reg = <0x0a10>;
+};
+
+usb_l4_div_ick: usb_l4_div_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <4>;
+	ti,max-div = <1>;
+	reg = <0x0a40>;
+	ti,index-starts-at-one;
+};
+
+usb_l4_ick: usb_l4_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-clock";
+	clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 7ce0b7f..bc0f9fc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -241,9 +241,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
 
 unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
 
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
 				   void __iomem **other_reg,
 				   u8 *other_bit);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 533efb4..a4a7595 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o autoidle.o
+obj-y					+= clk.o dpll.o autoidle.o composite.o
 endif
diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c
new file mode 100644
index 0000000..6208071
--- /dev/null
+++ b/drivers/clk/ti/composite.c
@@ -0,0 +1,224 @@
+/*
+ * TI composite clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include <linux/list.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+static unsigned long ti_composite_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long ti_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	return -EINVAL;
+}
+
+static int ti_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	return -EINVAL;
+}
+
+static const struct clk_ops ti_composite_divider_ops = {
+	.recalc_rate	= &ti_composite_recalc_rate,
+	.round_rate	= &ti_composite_round_rate,
+	.set_rate	= &ti_composite_set_rate,
+};
+
+static const struct clk_ops ti_composite_gate_ops = {
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+struct component_clk {
+	int num_parents;
+	const char **parent_names;
+	struct device_node *node;
+	int type;
+	struct clk_hw *hw;
+	struct list_head link;
+};
+
+static const char * __initconst component_clk_types[] = {
+	"gate", "divider", "mux"
+};
+
+static LIST_HEAD(component_clks);
+
+static struct component_clk *_lookup_component(struct device_node *node, int i)
+{
+	int rc;
+	struct of_phandle_args clkspec;
+	struct component_clk *comp;
+
+	rc = of_parse_phandle_with_args(node, "clocks", "#clock-cells", i,
+					&clkspec);
+	if (rc)
+		return NULL;
+
+	list_for_each_entry(comp, &component_clks, link) {
+		if (comp->node == clkspec.np)
+			return comp;
+	}
+	return NULL;
+}
+
+static inline struct clk_hw *_get_hw(struct component_clk *clk)
+{
+	if (clk)
+		return clk->hw;
+
+	return NULL;
+}
+
+static int __init of_ti_composite_clk_setup(struct device_node *node)
+{
+	int num_clks;
+	int i;
+	struct clk *clk;
+	struct component_clk *comp;
+	struct component_clk *clks[CLK_COMPONENT_TYPE_MAX] = { NULL };
+	const char *name = node->name;
+	int num_parents = 0;
+	const char **parent_names = NULL;
+	int ret = 0;
+
+	/* Number of component clocks to be put inside this clock */
+	num_clks = of_clk_get_parent_count(node);
+
+	if (num_clks < 1) {
+		pr_err("composite clk %s must have component(s)\n", name);
+		return -EINVAL;
+	}
+
+	/* Check for presence of each component clock */
+	for (i = 0; i < num_clks; i++) {
+		comp = _lookup_component(node, i);
+		if (!comp)
+			return -EAGAIN;
+		if (clks[comp->type] != NULL) {
+			pr_err("duplicate component types for %s (%s)!\n",
+			       name, component_clk_types[comp->type]);
+			return -EINVAL;
+		}
+		clks[comp->type] = comp;
+	}
+
+	/* All components exists, proceed with registration */
+	for (i = 0; i < CLK_COMPONENT_TYPE_MAX; i++) {
+		if (!clks[i])
+			continue;
+		if (clks[i]->num_parents) {
+			num_parents = clks[i]->num_parents;
+			parent_names = clks[i]->parent_names;
+		}
+	}
+
+	if (!num_parents) {
+		pr_err("%s: no parents found for %s!\n", __func__,
+		       name);
+		return -EINVAL;
+	}
+
+	clk = clk_register_composite(NULL, name, parent_names, num_parents,
+				     _get_hw(clks[CLK_COMPONENT_TYPE_MUX]),
+				     &clk_mux_ops,
+				     _get_hw(clks[CLK_COMPONENT_TYPE_DIVIDER]),
+				     &ti_composite_divider_ops,
+				     _get_hw(clks[CLK_COMPONENT_TYPE_GATE]),
+				     &ti_composite_gate_ops, 0);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		goto cleanup;
+	}
+
+	ret = PTR_ERR(clk);
+cleanup:
+	/* Free component clock list entries */
+	for (i = 0; i < 3; i++) {
+		if (!clks[i])
+			continue;
+		list_del(&clks[i]->link);
+		kfree(clks[i]);
+	}
+
+	return ret;
+}
+CLK_OF_DECLARE(ti_composite_clock, "ti,composite-clock",
+	       of_ti_composite_clk_setup);
+
+/**
+ * ti_clk_add_component - add a component clock to the pool
+ * @node: device node of the component clock
+ * @hw: hardware clock definition for the component clock
+ * @type: type of the component clock
+ *
+ * Adds a component clock to the list of available components, so that
+ * it can be registered by a composite clock.
+ */
+int __init ti_clk_add_component(struct device_node *node, struct clk_hw *hw,
+				int type)
+{
+	int num_parents;
+	const char **parent_names;
+	struct component_clk *clk;
+	int i;
+
+	num_parents = of_clk_get_parent_count(node);
+
+	if (num_parents < 1) {
+		pr_err("component-clock %s must have parent(s)\n", node->name);
+		return -EINVAL;
+	}
+
+	parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL);
+	if (!parent_names)
+		return -ENOMEM;
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk) {
+		kfree(parent_names);
+		return -ENOMEM;
+	}
+
+	clk->num_parents = num_parents;
+	clk->parent_names = parent_names;
+	clk->hw = hw;
+	clk->node = node;
+	clk->type = type;
+	list_add(&clk->link, &component_clks);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 58a3c7e..155a7a4 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -164,6 +164,14 @@ struct clk_hw_omap {
 /* DPLL Type and DCO Selection Flags */
 #define DPLL_J_TYPE		0x1
 
+/* Composite clock component types */
+enum {
+	CLK_COMPONENT_TYPE_GATE = 0,
+	CLK_COMPONENT_TYPE_DIVIDER,
+	CLK_COMPONENT_TYPE_MUX,
+	CLK_COMPONENT_TYPE_MAX,
+};
+
 /**
  * struct ti_dt_clk - OMAP DT clock alias declarations
  * @lk: clock lookup definition
@@ -215,11 +223,15 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
 int of_ti_clk_autoidle_setup(struct device_node *node);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 07/41] CLK: ti: add support for ti divider-clock

[Tero Kristo]

This patch adds support for TI divider clock binding, which simply uses
the basic clock divider to provide the features needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/divider.txt       |  114 ++++++++++
 drivers/clk/ti/Makefile                            |    3 +-
 drivers/clk/ti/divider.c                           |  228 ++++++++++++++++++++
 3 files changed, 344 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/divider.txt
 create mode 100644 drivers/clk/ti/divider.c

diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
new file mode 100644
index 0000000..35a6f5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/divider.txt
@@ -0,0 +1,114 @@
+Binding for TI divider clock
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped adjustable clock rate divider that does not gate and has
+only one input clock or parent.  By default the value programmed into
+the register is one less than the actual divisor value.  E.g:
+
+register value		actual divisor value
+0			1
+1			2
+2			3
+
+This assumption may be modified by the following optional properties:
+
+ti,index-starts-at-one - valid divisor values start at 1, not the default
+of 0.  E.g:
+register value		actual divisor value
+1			1
+2			2
+3			3
+
+ti,index-power-of-two - valid divisor values are powers of two.  E.g:
+register value		actual divisor value
+0			1
+1			2
+2			4
+
+Additionally an array of valid dividers may be supplied like so:
+
+	ti,dividers = <4>, <8>, <0>, <16>;
+
+Which will map the resulting values to a divisor table by their index:
+register value		actual divisor value
+0			4
+1			8
+2			<invalid divisor, skipped>
+3			16
+
+Any zero value in this array means the corresponding bit-value is invalid
+and must not be used.
+
+The binding must also provide the register to control the divider and
+unless the divider array is provided, min and max dividers. Optionally
+the number of bits to shift that mask, if necessary. If the shift value
+is missing it is the same as supplying a zero shift.
+
+This binding can also optionally provide support to the hardware autoidle
+feature, see [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable divider
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,dividers : array of integers defining divisors
+- ti,bit-shift : number of bits to shift the divider value, defaults to 0
+- ti,min-div : min divisor for dividing the input clock rate, only
+  needed if the first divisor is offset from the default value (1)
+- ti,max-div : max divisor for dividing the input clock rate, only needed
+  if ti,dividers is not defined.
+- ti,index-starts-at-one : valid divisor programming starts at 1, not zero,
+  only valid if ti,dividers is not defined.
+- ti,index-power-of-two : valid divisor programming must be a power of two,
+  only valid if ti,dividers is not defined.
+- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock,
+  see [2]
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
+  see [2]
+- ti,set-rate-parent : clk_set_rate is propagated to parent
+
+Examples:
+dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&dpll_usb_ck>;
+	ti,max-div = <127>;
+	reg = <0x190>;
+	ti,index-starts-at-one;
+};
+
+aess_fclk: aess_fclk@4a004528 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&abe_clk>;
+	ti,bit-shift = <24>;
+	reg = <0x528>;
+	ti,max-div = <2>;
+};
+
+dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&dpll_core_x2_ck>;
+	ti,max-div = <31>;
+	reg = <0x0134>;
+	ti,index-starts-at-one;
+};
+
+ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&corex2_fck>;
+	ti,bit-shift = <8>;
+	reg = <0x0a40>;
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index a4a7595..640ebf9 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,4 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o autoidle.o composite.o
+obj-y					+= clk.o dpll.o autoidle.o divider.o \
+					   composite.o
 endif
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
new file mode 100644
index 0000000..818549f
--- /dev/null
+++ b/drivers/clk/ti/divider.c
@@ -0,0 +1,228 @@
+/*
+ * TI Divider Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static struct clk_div_table
+__init *ti_clk_get_div_table(struct device_node *node)
+{
+	struct clk_div_table *table;
+	const __be32 *divspec;
+	u32 val;
+	u32 num_div;
+	u32 valid_div;
+	int i;
+
+	divspec = of_get_property(node, "ti,dividers", &num_div);
+
+	if (!divspec)
+		return NULL;
+
+	num_div /= 4;
+
+	valid_div = 0;
+
+	/* Determine required size for divider table */
+	for (i = 0; i < num_div; i++) {
+		of_property_read_u32_index(node, "ti,dividers", i, &val);
+		if (val)
+			valid_div++;
+	}
+
+	if (!valid_div) {
+		pr_err("no valid dividers for %s table\n", node->name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	table = kzalloc(sizeof(*table) * (valid_div + 1), GFP_KERNEL);
+
+	if (!table)
+		return ERR_PTR(-ENOMEM);
+
+	valid_div = 0;
+
+	for (i = 0; i < num_div; i++) {
+		of_property_read_u32_index(node, "ti,dividers", i, &val);
+		if (val) {
+			table[valid_div].div = val;
+			table[valid_div].val = i;
+			valid_div++;
+		}
+	}
+
+	return table;
+}
+
+static int _get_divider_width(struct device_node *node,
+			      const struct clk_div_table *table,
+			      u8 flags)
+{
+	u32 min_div;
+	u32 max_div;
+	u32 val = 0;
+	u32 div;
+
+	if (!table) {
+		/* Clk divider table not provided, determine min/max divs */
+		if (of_property_read_u32(node, "ti,min-div", &min_div))
+			min_div = 1;
+
+		if (of_property_read_u32(node, "ti,max-div", &max_div)) {
+			pr_err("no max-div for %s!\n", node->name);
+			return -EINVAL;
+		}
+
+		/* Determine bit width for the field */
+		if (flags & CLK_DIVIDER_ONE_BASED)
+			val = 1;
+
+		div = min_div;
+
+		while (div < max_div) {
+			if (flags & CLK_DIVIDER_POWER_OF_TWO)
+				div <<= 1;
+			else
+				div++;
+			val++;
+		}
+	} else {
+		div = 0;
+
+		while (table[div].div) {
+			val = table[div].val;
+			div++;
+		}
+	}
+
+	return fls(val);
+}
+
+static int __init ti_clk_divider_populate(struct device_node *node,
+	void __iomem **reg, const struct clk_div_table **table, u32 *flags,
+	u8 *div_flags, u8 *width, u8 *shift)
+{
+	u32 val;
+
+	*reg = ti_clk_get_reg_addr(node, 0);
+	if (!*reg)
+		return -EINVAL;
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		*shift = val;
+	else
+		*shift = 0;
+
+	*flags = 0;
+	*div_flags = 0;
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		*div_flags |= CLK_DIVIDER_ONE_BASED;
+
+	if (of_property_read_bool(node, "ti,index-power-of-two"))
+		*div_flags |= CLK_DIVIDER_POWER_OF_TWO;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		*flags |= CLK_SET_RATE_PARENT;
+
+	*table = ti_clk_get_div_table(node);
+
+	if (IS_ERR(*table))
+		return PTR_ERR(*table);
+
+	*width = _get_divider_width(node, *table, *div_flags);
+
+	kfree(*table);
+	*table = NULL;
+
+	return 0;
+}
+
+/**
+ * of_ti_divider_clk_setup - Setup function for simple div rate clock
+ * @node: device node for this clock
+ *
+ * Sets up a basic divider clock.
+ */
+static int __init of_ti_divider_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	void __iomem *reg;
+	const char *parent_name;
+	u8 clk_divider_flags = 0;
+	u8 width = 0;
+	u8 shift = 0;
+	const struct clk_div_table *table = NULL;
+	u32 flags = 0;
+	int ret = 0;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	ret = ti_clk_divider_populate(node, &reg, &table, &flags,
+				      &clk_divider_flags, &width, &shift);
+	if (ret < 0)
+		return ret;
+
+	clk = clk_register_divider_table(NULL, clk_name, parent_name,
+					 flags, reg, shift, width,
+					 clk_divider_flags, table, NULL);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		of_ti_clk_autoidle_setup(node);
+		return 0;
+	}
+
+	kfree(table);
+	return PTR_ERR(clk);
+}
+CLK_OF_DECLARE(divider_clk, "ti,divider-clock", of_ti_divider_clk_setup);
+
+static int __init of_ti_composite_divider_clk_setup(struct device_node *node)
+{
+	struct clk_divider *div;
+	u32 val;
+	int ret;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return -ENOMEM;
+
+	ret = ti_clk_divider_populate(node, &div->reg, &div->table, &val,
+				      &div->flags, &div->width, &div->shift);
+	if (ret < 0)
+		goto cleanup;
+
+	ret = ti_clk_add_component(node, &div->hw, CLK_COMPONENT_TYPE_DIVIDER);
+	if (!ret)
+		return 0;
+
+cleanup:
+	kfree(div->table);
+	kfree(div);
+	return ret;
+}
+CLK_OF_DECLARE(ti_composite_divider_clk, "ti,composite-divider-clock",
+	       of_ti_composite_divider_clk_setup);
-- 
1.7.9.5

[PATCHv10 07/41] CLK: ti: add support for ti divider-clock

[Tero Kristo]

This patch adds support for TI divider clock binding, which simply uses
the basic clock divider to provide the features needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/divider.txt       |  114 ++++++++++
 drivers/clk/ti/Makefile                            |    3 +-
 drivers/clk/ti/divider.c                           |  228 ++++++++++++++++++++
 3 files changed, 344 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/divider.txt
 create mode 100644 drivers/clk/ti/divider.c

diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
new file mode 100644
index 0000000..35a6f5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/divider.txt
@@ -0,0 +1,114 @@
+Binding for TI divider clock
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped adjustable clock rate divider that does not gate and has
+only one input clock or parent.  By default the value programmed into
+the register is one less than the actual divisor value.  E.g:
+
+register value		actual divisor value
+0			1
+1			2
+2			3
+
+This assumption may be modified by the following optional properties:
+
+ti,index-starts-at-one - valid divisor values start at 1, not the default
+of 0.  E.g:
+register value		actual divisor value
+1			1
+2			2
+3			3
+
+ti,index-power-of-two - valid divisor values are powers of two.  E.g:
+register value		actual divisor value
+0			1
+1			2
+2			4
+
+Additionally an array of valid dividers may be supplied like so:
+
+	ti,dividers = <4>, <8>, <0>, <16>;
+
+Which will map the resulting values to a divisor table by their index:
+register value		actual divisor value
+0			4
+1			8
+2			<invalid divisor, skipped>
+3			16
+
+Any zero value in this array means the corresponding bit-value is invalid
+and must not be used.
+
+The binding must also provide the register to control the divider and
+unless the divider array is provided, min and max dividers. Optionally
+the number of bits to shift that mask, if necessary. If the shift value
+is missing it is the same as supplying a zero shift.
+
+This binding can also optionally provide support to the hardware autoidle
+feature, see [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable divider
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,dividers : array of integers defining divisors
+- ti,bit-shift : number of bits to shift the divider value, defaults to 0
+- ti,min-div : min divisor for dividing the input clock rate, only
+  needed if the first divisor is offset from the default value (1)
+- ti,max-div : max divisor for dividing the input clock rate, only needed
+  if ti,dividers is not defined.
+- ti,index-starts-at-one : valid divisor programming starts at 1, not zero,
+  only valid if ti,dividers is not defined.
+- ti,index-power-of-two : valid divisor programming must be a power of two,
+  only valid if ti,dividers is not defined.
+- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock,
+  see [2]
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
+  see [2]
+- ti,set-rate-parent : clk_set_rate is propagated to parent
+
+Examples:
+dpll_usb_m2_ck: dpll_usb_m2_ck at 4a008190 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&dpll_usb_ck>;
+	ti,max-div = <127>;
+	reg = <0x190>;
+	ti,index-starts-at-one;
+};
+
+aess_fclk: aess_fclk at 4a004528 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&abe_clk>;
+	ti,bit-shift = <24>;
+	reg = <0x528>;
+	ti,max-div = <2>;
+};
+
+dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&dpll_core_x2_ck>;
+	ti,max-div = <31>;
+	reg = <0x0134>;
+	ti,index-starts-at-one;
+};
+
+ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&corex2_fck>;
+	ti,bit-shift = <8>;
+	reg = <0x0a40>;
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index a4a7595..640ebf9 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,4 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o autoidle.o composite.o
+obj-y					+= clk.o dpll.o autoidle.o divider.o \
+					   composite.o
 endif
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
new file mode 100644
index 0000000..818549f
--- /dev/null
+++ b/drivers/clk/ti/divider.c
@@ -0,0 +1,228 @@
+/*
+ * TI Divider Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static struct clk_div_table
+__init *ti_clk_get_div_table(struct device_node *node)
+{
+	struct clk_div_table *table;
+	const __be32 *divspec;
+	u32 val;
+	u32 num_div;
+	u32 valid_div;
+	int i;
+
+	divspec = of_get_property(node, "ti,dividers", &num_div);
+
+	if (!divspec)
+		return NULL;
+
+	num_div /= 4;
+
+	valid_div = 0;
+
+	/* Determine required size for divider table */
+	for (i = 0; i < num_div; i++) {
+		of_property_read_u32_index(node, "ti,dividers", i, &val);
+		if (val)
+			valid_div++;
+	}
+
+	if (!valid_div) {
+		pr_err("no valid dividers for %s table\n", node->name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	table = kzalloc(sizeof(*table) * (valid_div + 1), GFP_KERNEL);
+
+	if (!table)
+		return ERR_PTR(-ENOMEM);
+
+	valid_div = 0;
+
+	for (i = 0; i < num_div; i++) {
+		of_property_read_u32_index(node, "ti,dividers", i, &val);
+		if (val) {
+			table[valid_div].div = val;
+			table[valid_div].val = i;
+			valid_div++;
+		}
+	}
+
+	return table;
+}
+
+static int _get_divider_width(struct device_node *node,
+			      const struct clk_div_table *table,
+			      u8 flags)
+{
+	u32 min_div;
+	u32 max_div;
+	u32 val = 0;
+	u32 div;
+
+	if (!table) {
+		/* Clk divider table not provided, determine min/max divs */
+		if (of_property_read_u32(node, "ti,min-div", &min_div))
+			min_div = 1;
+
+		if (of_property_read_u32(node, "ti,max-div", &max_div)) {
+			pr_err("no max-div for %s!\n", node->name);
+			return -EINVAL;
+		}
+
+		/* Determine bit width for the field */
+		if (flags & CLK_DIVIDER_ONE_BASED)
+			val = 1;
+
+		div = min_div;
+
+		while (div < max_div) {
+			if (flags & CLK_DIVIDER_POWER_OF_TWO)
+				div <<= 1;
+			else
+				div++;
+			val++;
+		}
+	} else {
+		div = 0;
+
+		while (table[div].div) {
+			val = table[div].val;
+			div++;
+		}
+	}
+
+	return fls(val);
+}
+
+static int __init ti_clk_divider_populate(struct device_node *node,
+	void __iomem **reg, const struct clk_div_table **table, u32 *flags,
+	u8 *div_flags, u8 *width, u8 *shift)
+{
+	u32 val;
+
+	*reg = ti_clk_get_reg_addr(node, 0);
+	if (!*reg)
+		return -EINVAL;
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		*shift = val;
+	else
+		*shift = 0;
+
+	*flags = 0;
+	*div_flags = 0;
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		*div_flags |= CLK_DIVIDER_ONE_BASED;
+
+	if (of_property_read_bool(node, "ti,index-power-of-two"))
+		*div_flags |= CLK_DIVIDER_POWER_OF_TWO;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		*flags |= CLK_SET_RATE_PARENT;
+
+	*table = ti_clk_get_div_table(node);
+
+	if (IS_ERR(*table))
+		return PTR_ERR(*table);
+
+	*width = _get_divider_width(node, *table, *div_flags);
+
+	kfree(*table);
+	*table = NULL;
+
+	return 0;
+}
+
+/**
+ * of_ti_divider_clk_setup - Setup function for simple div rate clock
+ * @node: device node for this clock
+ *
+ * Sets up a basic divider clock.
+ */
+static int __init of_ti_divider_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	void __iomem *reg;
+	const char *parent_name;
+	u8 clk_divider_flags = 0;
+	u8 width = 0;
+	u8 shift = 0;
+	const struct clk_div_table *table = NULL;
+	u32 flags = 0;
+	int ret = 0;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	ret = ti_clk_divider_populate(node, &reg, &table, &flags,
+				      &clk_divider_flags, &width, &shift);
+	if (ret < 0)
+		return ret;
+
+	clk = clk_register_divider_table(NULL, clk_name, parent_name,
+					 flags, reg, shift, width,
+					 clk_divider_flags, table, NULL);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		of_ti_clk_autoidle_setup(node);
+		return 0;
+	}
+
+	kfree(table);
+	return PTR_ERR(clk);
+}
+CLK_OF_DECLARE(divider_clk, "ti,divider-clock", of_ti_divider_clk_setup);
+
+static int __init of_ti_composite_divider_clk_setup(struct device_node *node)
+{
+	struct clk_divider *div;
+	u32 val;
+	int ret;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return -ENOMEM;
+
+	ret = ti_clk_divider_populate(node, &div->reg, &div->table, &val,
+				      &div->flags, &div->width, &div->shift);
+	if (ret < 0)
+		goto cleanup;
+
+	ret = ti_clk_add_component(node, &div->hw, CLK_COMPONENT_TYPE_DIVIDER);
+	if (!ret)
+		return 0;
+
+cleanup:
+	kfree(div->table);
+	kfree(div);
+	return ret;
+}
+CLK_OF_DECLARE(ti_composite_divider_clk, "ti,composite-divider-clock",
+	       of_ti_composite_divider_clk_setup);
-- 
1.7.9.5

[PATCHv10 08/41] clk: ti: add support for TI fixed factor clock

[Tero Kristo]

This behaves exactly in similar manner to basic fixed-factor-clock, but
adds a few properties on top for handling clock hardware autoidling.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../bindings/clock/ti/fixed-factor-clock.txt       |   43 +++++++++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/fixed-factor.c                      |   68 ++++++++++++++++++++
 3 files changed, 112 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
 create mode 100644 drivers/clk/ti/fixed-factor.c

diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
new file mode 100644
index 0000000..662b36d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -0,0 +1,43 @@
+Binding for TI fixed factor rate clock sources.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1], and also uses the autoidle
+support from TI autoidle clock [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- ti,clock-div: fixed divider.
+- ti,clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
+  see [2]
+- reg: offset for the autoidle register of this clock, see [2]
+- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
+- ti,set-rate-parent: clk_set_rate is propagated to parent
+
+Example:
+	clock {
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		ti,clock-div = <2>;
+		ti,clock-mult = <1>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 640ebf9..f57fc4b 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,4 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   composite.o
+					   fixed-factor.o composite.o
 endif
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
new file mode 100644
index 0000000..e28f9b9
--- /dev/null
+++ b/drivers/clk/ti/fixed-factor.c
@@ -0,0 +1,68 @@
+/*
+ * TI Fixed Factor Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * of_ti_fixed_factor_clk_setup - Setup function for TI fixed factor clock
+ * @node: device node for this clock
+ *
+ * Sets up a simple fixed factor clock based on device tree info.
+ */
+static int __init of_ti_fixed_factor_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 div, mult;
+	u32 flags = 0;
+
+	if (of_property_read_u32(node, "ti,clock-div", &div)) {
+		pr_err("%s must have a clock-div property\n", node->name);
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(node, "ti,clock-mult", &mult)) {
+		pr_err("%s must have a clock-mult property\n", node->name);
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		flags |= CLK_SET_RATE_PARENT;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags,
+					mult, div);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return of_ti_clk_autoidle_setup(node);
+	}
+
+	return PTR_ERR(clk);
+}
+CLK_OF_DECLARE(ti_fixed_factor_clk, "ti,fixed-factor-clock",
+	       of_ti_fixed_factor_clk_setup);
-- 
1.7.9.5

[PATCHv10 08/41] clk: ti: add support for TI fixed factor clock

[Tero Kristo]

This behaves exactly in similar manner to basic fixed-factor-clock, but
adds a few properties on top for handling clock hardware autoidling.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../bindings/clock/ti/fixed-factor-clock.txt       |   43 +++++++++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/fixed-factor.c                      |   68 ++++++++++++++++++++
 3 files changed, 112 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
 create mode 100644 drivers/clk/ti/fixed-factor.c

diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
new file mode 100644
index 0000000..662b36d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -0,0 +1,43 @@
+Binding for TI fixed factor rate clock sources.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1], and also uses the autoidle
+support from TI autoidle clock [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- ti,clock-div: fixed divider.
+- ti,clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
+  see [2]
+- reg: offset for the autoidle register of this clock, see [2]
+- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
+- ti,set-rate-parent: clk_set_rate is propagated to parent
+
+Example:
+	clock {
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		ti,clock-div = <2>;
+		ti,clock-mult = <1>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 640ebf9..f57fc4b 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,4 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   composite.o
+					   fixed-factor.o composite.o
 endif
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
new file mode 100644
index 0000000..e28f9b9
--- /dev/null
+++ b/drivers/clk/ti/fixed-factor.c
@@ -0,0 +1,68 @@
+/*
+ * TI Fixed Factor Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * of_ti_fixed_factor_clk_setup - Setup function for TI fixed factor clock
+ * @node: device node for this clock
+ *
+ * Sets up a simple fixed factor clock based on device tree info.
+ */
+static int __init of_ti_fixed_factor_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 div, mult;
+	u32 flags = 0;
+
+	if (of_property_read_u32(node, "ti,clock-div", &div)) {
+		pr_err("%s must have a clock-div property\n", node->name);
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(node, "ti,clock-mult", &mult)) {
+		pr_err("%s must have a clock-mult property\n", node->name);
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		flags |= CLK_SET_RATE_PARENT;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags,
+					mult, div);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return of_ti_clk_autoidle_setup(node);
+	}
+
+	return PTR_ERR(clk);
+}
+CLK_OF_DECLARE(ti_fixed_factor_clk, "ti,fixed-factor-clock",
+	       of_ti_fixed_factor_clk_setup);
-- 
1.7.9.5

[PATCHv10 09/41] CLK: TI: add support for gate clock

[Tero Kristo]

This patch adds support for TI specific gate clocks. These behave as basic
gate-clock, but have different ops / hw-ops for controlling the actual
gate, for example waiting until the clock is ready. Several sub-types
are supported:
- ti,gate-clock: basic gate clock with default ops/hwops
- ti,clkdm-gate-clock: clockdomain level gate control
- ti,dss-gate-clock: gate clock with DSS specific hardware handling
- ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling
- ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/gate.txt          |   85 +++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/gate.c                              |  249 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    6 +
 4 files changed, 341 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/gate.txt
 create mode 100644 drivers/clk/ti/gate.c

diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
new file mode 100644
index 0000000..125281a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -0,0 +1,85 @@
+Binding for Texas Instruments gate clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features. If no register
+is provided for this clock, the code assumes that a clockdomain
+will be controlled instead and the corresponding hw-ops for
+that is used.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,gate-clock" - basic gate clock
+  "ti,wait-gate-clock" - gate clock which waits until clock is active before
+			 returning from clk_enable()
+  "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
+  "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
+  "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
+			  clock directly from a clockdomain, see [3] how
+			  to map clockdomains properly
+  "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
+			  required for a hardware errata
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable gate, not needed for
+	ti,clkdm-gate-clock type
+
+Optional properties:
+- ti,bit-shift : bit shift for programming the clock gate, invalid for
+		 ti,clkdm-gate-clock type
+- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
+  gates the clock and clearing the bit ungates the clock.
+
+Examples:
+	mmchs2_fck: mmchs2_fck@48004a00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x48004a00 0x4>;
+		ti,bit-shift = <25>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		reg = <0x48004e00 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	emac_ick: emac_ick@4800259c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x4800259c 0x4>;
+		ti,bit-shift = <1>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x48004d00 0x4>;
+		ti,set-bit-to-disable;
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index f57fc4b..7cba389 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,4 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   fixed-factor.o composite.o
+					   fixed-factor.o gate.o composite.o
 endif
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
new file mode 100644
index 0000000..05a5996
--- /dev/null
+++ b/drivers/clk/ti/gate.c
@@ -0,0 +1,249 @@
+/*
+ * OMAP gate clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk);
+
+static const struct clk_ops omap_gate_clkdm_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_clkops_enable_clkdm,
+	.disable	= &omap2_clkops_disable_clkdm,
+};
+
+static const struct clk_ops omap_gate_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap36xx_gate_clk_enable_with_hsdiv_restore,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+/**
+ * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
+ *         from HSDivider PWRDN problem Implements Errata ID: i556.
+ * @clk: DPLL output struct clk
+ *
+ * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
+ * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
+ * valueafter their respective PWRDN bits are set.  Any dummy write
+ * (Any other value different from the Read value) to the
+ * corresponding CM_CLKSEL register will refresh the dividers.
+ */
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
+{
+	struct clk_divider *parent;
+	struct clk_hw *parent_hw;
+	u32 dummy_v, orig_v;
+	int ret;
+
+	/* Clear PWRDN bit of HSDIVIDER */
+	ret = omap2_dflt_clk_enable(clk);
+
+	/* Parent is the x2 node, get parent of parent for the m2 div */
+	parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk)));
+	parent = to_clk_divider(parent_hw);
+
+	/* Restore the dividers */
+	if (!ret) {
+		orig_v = clk_readl(parent->reg);
+		dummy_v = orig_v;
+
+		/* Write any other value different from the Read value */
+		dummy_v ^= (1 << parent->shift);
+		clk_writel(dummy_v, parent->reg);
+
+		/* Write the original divider */
+		clk_writel(orig_v, parent->reg);
+	}
+
+	return ret;
+}
+
+static int __init _of_ti_gate_clk_setup(struct device_node *node,
+					const struct clk_ops *ops,
+					const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 val;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return -ENOMEM;
+
+	clk_hw->hw.init = &init;
+
+	init.name = clk_name;
+	init.ops = ops;
+
+	if (ops != &omap_gate_clkdm_clk_ops) {
+		clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0);
+		if (!clk_hw->enable_reg)
+			return -EINVAL;
+
+		if (!of_property_read_u32(node, "ti,bit-shift", &val))
+			clk_hw->enable_bit = val;
+	}
+
+	clk_hw->ops = hw_ops;
+
+	clk_hw->flags = REGMAP_ADDRESSING;
+
+	if (of_clk_get_parent_count(node) != 1) {
+		pr_err("%s must have 1 parent\n", clk_name);
+		return -EINVAL;
+	}
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		init.flags |= CLK_SET_RATE_PARENT;
+
+	if (of_property_read_bool(node, "ti,set-bit-to-disable"))
+		clk_hw->flags |= INVERT_ENABLE;
+
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	kfree(clk_hw);
+	return PTR_ERR(clk);
+}
+
+static int __init _of_ti_composite_gate_clk_setup(struct device_node *node,
+					const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk_hw_omap *gate;
+	u32 val = 0;
+	int ret;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return -ENOMEM;
+
+	gate->enable_reg = ti_clk_get_reg_addr(node, 0);
+	if (!gate->enable_reg)
+		return -EINVAL;
+
+	of_property_read_u32(node, "ti,bit-shift", &val);
+
+	gate->enable_bit = val;
+	gate->ops = hw_ops;
+	gate->flags = REGMAP_ADDRESSING;
+
+	ret = ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE);
+	if (!ret)
+		return 0;
+
+	kfree(gate);
+
+	return ret;
+}
+
+static int __init
+of_ti_composite_no_wait_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_composite_gate_clk_setup(node, NULL);
+}
+CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock",
+	       of_ti_composite_no_wait_gate_clk_setup);
+
+static int __init of_ti_composite_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait);
+}
+CLK_OF_DECLARE(ti_composite_interface_clk, "ti,composite-interface-clock",
+	       of_ti_composite_interface_clk_setup);
+
+static int __init of_ti_composite_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_composite_gate_clk_setup(node, &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_composite_gate_clk, "ti,composite-gate-clock",
+	       of_ti_composite_gate_clk_setup);
+
+
+static int __init of_ti_clkdm_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clkdm_clk_ops, NULL);
+}
+CLK_OF_DECLARE(ti_clkdm_gate_clk, "ti,clkdm-gate-clock",
+	       of_ti_clkdm_gate_clk_setup);
+
+static int __init of_ti_hsdiv_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_hsdiv_restore_ops,
+				     &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_hsdiv_gate_clk, "ti,hsdiv-gate-clock",
+	       of_ti_hsdiv_gate_clk_setup);
+
+static int __init of_ti_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL);
+}
+CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup)
+
+static int __init of_ti_wait_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_wait_gate_clk, "ti,wait-gate-clock",
+	       of_ti_wait_gate_clk_setup);
+
+#ifdef CONFIG_ARCH_OMAP3
+static int __init of_ti_am35xx_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
+				     &clkhwops_am35xx_ipss_module_wait);
+}
+CLK_OF_DECLARE(ti_am35xx_gate_clk, "ti,am35xx-gate-clock",
+	       of_ti_am35xx_gate_clk_setup);
+
+static int __init of_ti_dss_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
+				     &clkhwops_omap3430es2_dss_usbhost_wait);
+}
+CLK_OF_DECLARE(ti_dss_gate_clk, "ti,dss-gate-clock",
+	       of_ti_dss_gate_clk_setup);
+#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 155a7a4..872ff2a 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -221,6 +221,8 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 void omap2_init_clk_clkdm(struct clk_hw *clk);
 unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -243,5 +245,9 @@ static inline void of_ti_clk_deny_autoidle_all(void) { }
 
 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 
 #endif
-- 
1.7.9.5

[PATCHv10 09/41] CLK: TI: add support for gate clock

[Tero Kristo]

This patch adds support for TI specific gate clocks. These behave as basic
gate-clock, but have different ops / hw-ops for controlling the actual
gate, for example waiting until the clock is ready. Several sub-types
are supported:
- ti,gate-clock: basic gate clock with default ops/hwops
- ti,clkdm-gate-clock: clockdomain level gate control
- ti,dss-gate-clock: gate clock with DSS specific hardware handling
- ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling
- ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/gate.txt          |   85 +++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/gate.c                              |  249 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    6 +
 4 files changed, 341 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/gate.txt
 create mode 100644 drivers/clk/ti/gate.c

diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
new file mode 100644
index 0000000..125281a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -0,0 +1,85 @@
+Binding for Texas Instruments gate clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features. If no register
+is provided for this clock, the code assumes that a clockdomain
+will be controlled instead and the corresponding hw-ops for
+that is used.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,gate-clock" - basic gate clock
+  "ti,wait-gate-clock" - gate clock which waits until clock is active before
+			 returning from clk_enable()
+  "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
+  "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
+  "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
+			  clock directly from a clockdomain, see [3] how
+			  to map clockdomains properly
+  "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
+			  required for a hardware errata
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable gate, not needed for
+	ti,clkdm-gate-clock type
+
+Optional properties:
+- ti,bit-shift : bit shift for programming the clock gate, invalid for
+		 ti,clkdm-gate-clock type
+- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
+  gates the clock and clearing the bit ungates the clock.
+
+Examples:
+	mmchs2_fck: mmchs2_fck at 48004a00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x48004a00 0x4>;
+		ti,bit-shift = <25>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2 at 48004e00 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		reg = <0x48004e00 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	emac_ick: emac_ick at 4800259c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x4800259c 0x4>;
+		ti,bit-shift = <1>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck at 48004d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x48004d00 0x4>;
+		ti,set-bit-to-disable;
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index f57fc4b..7cba389 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,4 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   fixed-factor.o composite.o
+					   fixed-factor.o gate.o composite.o
 endif
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
new file mode 100644
index 0000000..05a5996
--- /dev/null
+++ b/drivers/clk/ti/gate.c
@@ -0,0 +1,249 @@
+/*
+ * OMAP gate clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk);
+
+static const struct clk_ops omap_gate_clkdm_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_clkops_enable_clkdm,
+	.disable	= &omap2_clkops_disable_clkdm,
+};
+
+static const struct clk_ops omap_gate_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap36xx_gate_clk_enable_with_hsdiv_restore,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+/**
+ * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
+ *         from HSDivider PWRDN problem Implements Errata ID: i556.
+ * @clk: DPLL output struct clk
+ *
+ * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
+ * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
+ * valueafter their respective PWRDN bits are set.  Any dummy write
+ * (Any other value different from the Read value) to the
+ * corresponding CM_CLKSEL register will refresh the dividers.
+ */
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
+{
+	struct clk_divider *parent;
+	struct clk_hw *parent_hw;
+	u32 dummy_v, orig_v;
+	int ret;
+
+	/* Clear PWRDN bit of HSDIVIDER */
+	ret = omap2_dflt_clk_enable(clk);
+
+	/* Parent is the x2 node, get parent of parent for the m2 div */
+	parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk)));
+	parent = to_clk_divider(parent_hw);
+
+	/* Restore the dividers */
+	if (!ret) {
+		orig_v = clk_readl(parent->reg);
+		dummy_v = orig_v;
+
+		/* Write any other value different from the Read value */
+		dummy_v ^= (1 << parent->shift);
+		clk_writel(dummy_v, parent->reg);
+
+		/* Write the original divider */
+		clk_writel(orig_v, parent->reg);
+	}
+
+	return ret;
+}
+
+static int __init _of_ti_gate_clk_setup(struct device_node *node,
+					const struct clk_ops *ops,
+					const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 val;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return -ENOMEM;
+
+	clk_hw->hw.init = &init;
+
+	init.name = clk_name;
+	init.ops = ops;
+
+	if (ops != &omap_gate_clkdm_clk_ops) {
+		clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0);
+		if (!clk_hw->enable_reg)
+			return -EINVAL;
+
+		if (!of_property_read_u32(node, "ti,bit-shift", &val))
+			clk_hw->enable_bit = val;
+	}
+
+	clk_hw->ops = hw_ops;
+
+	clk_hw->flags = REGMAP_ADDRESSING;
+
+	if (of_clk_get_parent_count(node) != 1) {
+		pr_err("%s must have 1 parent\n", clk_name);
+		return -EINVAL;
+	}
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		init.flags |= CLK_SET_RATE_PARENT;
+
+	if (of_property_read_bool(node, "ti,set-bit-to-disable"))
+		clk_hw->flags |= INVERT_ENABLE;
+
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	kfree(clk_hw);
+	return PTR_ERR(clk);
+}
+
+static int __init _of_ti_composite_gate_clk_setup(struct device_node *node,
+					const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk_hw_omap *gate;
+	u32 val = 0;
+	int ret;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return -ENOMEM;
+
+	gate->enable_reg = ti_clk_get_reg_addr(node, 0);
+	if (!gate->enable_reg)
+		return -EINVAL;
+
+	of_property_read_u32(node, "ti,bit-shift", &val);
+
+	gate->enable_bit = val;
+	gate->ops = hw_ops;
+	gate->flags = REGMAP_ADDRESSING;
+
+	ret = ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE);
+	if (!ret)
+		return 0;
+
+	kfree(gate);
+
+	return ret;
+}
+
+static int __init
+of_ti_composite_no_wait_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_composite_gate_clk_setup(node, NULL);
+}
+CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock",
+	       of_ti_composite_no_wait_gate_clk_setup);
+
+static int __init of_ti_composite_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait);
+}
+CLK_OF_DECLARE(ti_composite_interface_clk, "ti,composite-interface-clock",
+	       of_ti_composite_interface_clk_setup);
+
+static int __init of_ti_composite_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_composite_gate_clk_setup(node, &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_composite_gate_clk, "ti,composite-gate-clock",
+	       of_ti_composite_gate_clk_setup);
+
+
+static int __init of_ti_clkdm_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clkdm_clk_ops, NULL);
+}
+CLK_OF_DECLARE(ti_clkdm_gate_clk, "ti,clkdm-gate-clock",
+	       of_ti_clkdm_gate_clk_setup);
+
+static int __init of_ti_hsdiv_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_hsdiv_restore_ops,
+				     &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_hsdiv_gate_clk, "ti,hsdiv-gate-clock",
+	       of_ti_hsdiv_gate_clk_setup);
+
+static int __init of_ti_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL);
+}
+CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup)
+
+static int __init of_ti_wait_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_wait_gate_clk, "ti,wait-gate-clock",
+	       of_ti_wait_gate_clk_setup);
+
+#ifdef CONFIG_ARCH_OMAP3
+static int __init of_ti_am35xx_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
+				     &clkhwops_am35xx_ipss_module_wait);
+}
+CLK_OF_DECLARE(ti_am35xx_gate_clk, "ti,am35xx-gate-clock",
+	       of_ti_am35xx_gate_clk_setup);
+
+static int __init of_ti_dss_gate_clk_setup(struct device_node *node)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
+				     &clkhwops_omap3430es2_dss_usbhost_wait);
+}
+CLK_OF_DECLARE(ti_dss_gate_clk, "ti,dss-gate-clock",
+	       of_ti_dss_gate_clk_setup);
+#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 155a7a4..872ff2a 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -221,6 +221,8 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 void omap2_init_clk_clkdm(struct clk_hw *clk);
 unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -243,5 +245,9 @@ static inline void of_ti_clk_deny_autoidle_all(void) { }
 
 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 
 #endif
-- 
1.7.9.5

[PATCHv10 11/41] clk: ti: add support for basic mux clock

[Tero Kristo]

ti,mux-clock provides now a binding for basic mux support. This is just
using the basic clock type.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 Documentation/devicetree/bindings/clock/ti/mux.txt |   76 +++++++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/mux.c                               |  141 ++++++++++++++++++++
 3 files changed, 218 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/mux.txt
 create mode 100644 drivers/clk/ti/mux.c

diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
new file mode 100644
index 0000000..2d0d170
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -0,0 +1,76 @@
+Binding for TI mux clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped multiplexer with multiple input clock signals or
+parents, one of which can be selected as output.  This clock does not
+gate or adjust the parent rate via a divider or multiplier.
+
+By default the "clocks" property lists the parents in the same order
+as they are programmed into the regster.  E.g:
+
+	clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
+
+results in programming the register as follows:
+
+register value		selected parent clock
+0			foo_clock
+1			bar_clock
+2			baz_clock
+
+Some clock controller IPs do not allow a value of zero to be programmed
+into the register, instead indexing begins at 1.  The optional property
+"index-starts-at-one" modified the scheme as follows:
+
+register value		selected clock parent
+1			foo_clock
+2			bar_clock
+3			baz_clock
+
+The binding must provide the register to control the mux. Optionally
+the number of bits to shift the control field in the register can be
+supplied. If the shift value is missing it is the same as supplying
+a zero shift.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks
+- reg : register offset for register controlling adjustable mux
+
+Optional properties:
+- ti,bit-shift : number of bits to shift the bit-mask, defaults to
+  0 if not present
+- ti,index-starts-at-one : valid input select programming starts at 1, not
+  zero
+- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
+  not supported by the composite-mux-clock subtype
+
+Examples:
+
+sys_clkin_ck: sys_clkin_ck@4a306110 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+	reg = <0x0110>;
+	ti,index-starts-at-one;
+};
+
+abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+	ti,bit-shift = <24>;
+	reg = <0x0108>;
+};
+
+mcbsp5_mux_fck: mcbsp5_mux_fck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-mux-clock";
+	clocks = <&core_96m_fck>, <&mcbsp_clks>;
+	ti,bit-shift = <4>;
+	reg = <0x02d8>;
+};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 67056fb..ef61d39 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,5 +1,5 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o
+					   composite.o mux.o
 endif
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
new file mode 100644
index 0000000..b0aac6a
--- /dev/null
+++ b/drivers/clk/ti/mux.c
@@ -0,0 +1,141 @@
+/*
+ * TI Multiplexer Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * of_mux_clk_setup - Setup function for simple mux rate clock
+ * @node: DT node for the clock
+ *
+ * Sets up a basic clock multiplexer.
+ */
+static int of_mux_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	void __iomem *reg;
+	int num_parents;
+	const char **parent_names;
+	int i;
+	u8 clk_mux_flags = 0;
+	u32 mask = 0;
+	u32 shift = 0;
+	u32 flags = 0;
+	int ret;
+
+	num_parents = of_clk_get_parent_count(node);
+	if (num_parents < 2) {
+		pr_err("mux-clock %s must have parents\n", node->name);
+		return -EINVAL;
+	}
+	parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL);
+	if (!parent_names)
+		return -ENOMEM;
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!reg) {
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	of_property_read_u32(node, "ti,bit-shift", &shift);
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		clk_mux_flags |= CLK_MUX_INDEX_ONE;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		flags |= CLK_SET_RATE_PARENT;
+
+	/* Generate bit-mask based on parent info */
+	mask = num_parents;
+	if (!(clk_mux_flags & CLK_MUX_INDEX_ONE))
+		mask--;
+
+	mask = (1 << fls(mask)) - 1;
+
+	clk = clk_register_mux_table(NULL, node->name, parent_names,
+				     num_parents, flags, reg, shift, mask,
+				     clk_mux_flags, NULL, NULL);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+	ret = PTR_ERR(clk);
+
+cleanup:
+	kfree(parent_names);
+	return ret;
+}
+CLK_OF_DECLARE(mux_clk, "ti,mux-clock", of_mux_clk_setup);
+
+static int __init of_ti_composite_mux_clk_setup(struct device_node *node)
+{
+	struct clk_mux *mux;
+	int num_parents;
+	int ret;
+	u32 val;
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	mux->reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!mux->reg) {
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		mux->shift = val;
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		mux->flags |= CLK_MUX_INDEX_ONE;
+
+	num_parents = of_clk_get_parent_count(node);
+
+	if (num_parents < 2) {
+		pr_err("%s must have parents\n", node->name);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	mux->mask = num_parents - 1;
+	mux->mask = (1 << fls(mux->mask)) - 1;
+
+	ret = ti_clk_add_component(node, &mux->hw, CLK_COMPONENT_TYPE_MUX);
+	if (!ret)
+		return 0;
+
+cleanup:
+	kfree(mux);
+	return ret;
+}
+CLK_OF_DECLARE(ti_composite_mux_clk_setup, "ti,composite-mux-clock",
+	       of_ti_composite_mux_clk_setup);
-- 
1.7.9.5

[PATCHv10 11/41] clk: ti: add support for basic mux clock

[Tero Kristo]

ti,mux-clock provides now a binding for basic mux support. This is just
using the basic clock type.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 Documentation/devicetree/bindings/clock/ti/mux.txt |   76 +++++++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/mux.c                               |  141 ++++++++++++++++++++
 3 files changed, 218 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/mux.txt
 create mode 100644 drivers/clk/ti/mux.c

diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
new file mode 100644
index 0000000..2d0d170
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -0,0 +1,76 @@
+Binding for TI mux clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped multiplexer with multiple input clock signals or
+parents, one of which can be selected as output.  This clock does not
+gate or adjust the parent rate via a divider or multiplier.
+
+By default the "clocks" property lists the parents in the same order
+as they are programmed into the regster.  E.g:
+
+	clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
+
+results in programming the register as follows:
+
+register value		selected parent clock
+0			foo_clock
+1			bar_clock
+2			baz_clock
+
+Some clock controller IPs do not allow a value of zero to be programmed
+into the register, instead indexing begins at 1.  The optional property
+"index-starts-at-one" modified the scheme as follows:
+
+register value		selected clock parent
+1			foo_clock
+2			bar_clock
+3			baz_clock
+
+The binding must provide the register to control the mux. Optionally
+the number of bits to shift the control field in the register can be
+supplied. If the shift value is missing it is the same as supplying
+a zero shift.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks
+- reg : register offset for register controlling adjustable mux
+
+Optional properties:
+- ti,bit-shift : number of bits to shift the bit-mask, defaults to
+  0 if not present
+- ti,index-starts-at-one : valid input select programming starts at 1, not
+  zero
+- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
+  not supported by the composite-mux-clock subtype
+
+Examples:
+
+sys_clkin_ck: sys_clkin_ck at 4a306110 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+	reg = <0x0110>;
+	ti,index-starts-at-one;
+};
+
+abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck at 4a306108 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+	ti,bit-shift = <24>;
+	reg = <0x0108>;
+};
+
+mcbsp5_mux_fck: mcbsp5_mux_fck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-mux-clock";
+	clocks = <&core_96m_fck>, <&mcbsp_clks>;
+	ti,bit-shift = <4>;
+	reg = <0x02d8>;
+};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 67056fb..ef61d39 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,5 +1,5 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o
+					   composite.o mux.o
 endif
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
new file mode 100644
index 0000000..b0aac6a
--- /dev/null
+++ b/drivers/clk/ti/mux.c
@@ -0,0 +1,141 @@
+/*
+ * TI Multiplexer Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * of_mux_clk_setup - Setup function for simple mux rate clock
+ * @node: DT node for the clock
+ *
+ * Sets up a basic clock multiplexer.
+ */
+static int of_mux_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	void __iomem *reg;
+	int num_parents;
+	const char **parent_names;
+	int i;
+	u8 clk_mux_flags = 0;
+	u32 mask = 0;
+	u32 shift = 0;
+	u32 flags = 0;
+	int ret;
+
+	num_parents = of_clk_get_parent_count(node);
+	if (num_parents < 2) {
+		pr_err("mux-clock %s must have parents\n", node->name);
+		return -EINVAL;
+	}
+	parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL);
+	if (!parent_names)
+		return -ENOMEM;
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!reg) {
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	of_property_read_u32(node, "ti,bit-shift", &shift);
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		clk_mux_flags |= CLK_MUX_INDEX_ONE;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		flags |= CLK_SET_RATE_PARENT;
+
+	/* Generate bit-mask based on parent info */
+	mask = num_parents;
+	if (!(clk_mux_flags & CLK_MUX_INDEX_ONE))
+		mask--;
+
+	mask = (1 << fls(mask)) - 1;
+
+	clk = clk_register_mux_table(NULL, node->name, parent_names,
+				     num_parents, flags, reg, shift, mask,
+				     clk_mux_flags, NULL, NULL);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+	ret = PTR_ERR(clk);
+
+cleanup:
+	kfree(parent_names);
+	return ret;
+}
+CLK_OF_DECLARE(mux_clk, "ti,mux-clock", of_mux_clk_setup);
+
+static int __init of_ti_composite_mux_clk_setup(struct device_node *node)
+{
+	struct clk_mux *mux;
+	int num_parents;
+	int ret;
+	u32 val;
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	mux->reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!mux->reg) {
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		mux->shift = val;
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		mux->flags |= CLK_MUX_INDEX_ONE;
+
+	num_parents = of_clk_get_parent_count(node);
+
+	if (num_parents < 2) {
+		pr_err("%s must have parents\n", node->name);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	mux->mask = num_parents - 1;
+	mux->mask = (1 << fls(mux->mask)) - 1;
+
+	ret = ti_clk_add_component(node, &mux->hw, CLK_COMPONENT_TYPE_MUX);
+	if (!ret)
+		return 0;
+
+cleanup:
+	kfree(mux);
+	return ret;
+}
+CLK_OF_DECLARE(ti_composite_mux_clk_setup, "ti,composite-mux-clock",
+	       of_ti_composite_mux_clk_setup);
-- 
1.7.9.5

[PATCHv10 12/41] CLK: TI: add omap4 clock init file

[Tero Kristo]

clk-44xx.c now contains the clock init functionality for omap4, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock.h |    1 -
 drivers/clk/ti/Makefile     |    1 +
 drivers/clk/ti/clk-44xx.c   |  328 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h      |    3 +
 4 files changed, 332 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-44xx.c

diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 6bd72b5..b83fca6 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -247,7 +247,6 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 				void __iomem **idlest_reg,
 				u8 *idlest_bit, u8 *idlest_val);
 int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
 int omap2_clk_deny_idle(struct clk *clk);
 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index ef61d39..381f1f8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -2,4 +2,5 @@ ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o
+obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 endif
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
new file mode 100644
index 0000000..3e2090b
--- /dev/null
+++ b/drivers/clk/ti/clk-44xx.c
@@ -0,0 +1,328 @@
+/*
+ * OMAP4 Clock data
+ *
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Mike Turquette (mturquette@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX Some of the ES1 clocks have been removed/changed; once support
+ * is added for discriminating clocks by ES level, these should be added back
+ * in.
+ *
+ * XXX All of the remaining MODULEMODE clock nodes should be removed
+ * once the drivers are updated to use pm_runtime or to use the appropriate
+ * upstream clock node for rate/parent selection.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+/*
+ * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
+ * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
+ * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
+ * half of this value.
+ */
+#define OMAP4_DPLL_ABE_DEFFREQ				98304000
+
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ				960000000
+
+static struct ti_dt_clk omap44xx_clks[] = {
+	DT_CLK(NULL, "extalt_clkin_ck", "extalt_clkin_ck"),
+	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
+	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
+	DT_CLK(NULL, "pad_slimbus_core_clks_ck", "pad_slimbus_core_clks_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "slimbus_src_clk", "slimbus_src_clk"),
+	DT_CLK(NULL, "slimbus_clk", "slimbus_clk"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tie_low_clock_ck", "tie_low_clock_ck"),
+	DT_CLK(NULL, "utmi_phy_clkout_ck", "utmi_phy_clkout_ck"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "xclk60mhsp1_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "xclk60mhsp2_ck"),
+	DT_CLK(NULL, "xclk60motg_ck", "xclk60motg_ck"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux_ck", "abe_dpll_bypass_clk_mux_ck"),
+	DT_CLK(NULL, "abe_dpll_refclk_mux_ck", "abe_dpll_refclk_mux_ck"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "core_hsd_byp_clk_mux_ck", "core_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m6x2_ck", "dpll_core_m6x2_ck"),
+	DT_CLK(NULL, "dbgclk_mux_ck", "dbgclk_mux_ck"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "ddrphy_ck", "ddrphy_ck"),
+	DT_CLK(NULL, "dpll_core_m5x2_ck", "dpll_core_m5x2_ck"),
+	DT_CLK(NULL, "div_core_ck", "div_core_ck"),
+	DT_CLK(NULL, "div_iva_hs_clk", "div_iva_hs_clk"),
+	DT_CLK(NULL, "div_mpu_hs_clk", "div_mpu_hs_clk"),
+	DT_CLK(NULL, "dpll_core_m4x2_ck", "dpll_core_m4x2_ck"),
+	DT_CLK(NULL, "dll_clk_div_ck", "dll_clk_div_ck"),
+	DT_CLK(NULL, "dpll_abe_m2_ck", "dpll_abe_m2_ck"),
+	DT_CLK(NULL, "dpll_core_m3x2_ck", "dpll_core_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_m7x2_ck", "dpll_core_m7x2_ck"),
+	DT_CLK(NULL, "iva_hsd_byp_clk_mux_ck", "iva_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_x2_ck", "dpll_iva_x2_ck"),
+	DT_CLK(NULL, "dpll_iva_m4x2_ck", "dpll_iva_m4x2_ck"),
+	DT_CLK(NULL, "dpll_iva_m5x2_ck", "dpll_iva_m5x2_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "per_hs_clk_div_ck", "per_hs_clk_div_ck"),
+	DT_CLK(NULL, "per_hsd_byp_clk_mux_ck", "per_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_per_m3x2_ck", "dpll_per_m3x2_ck"),
+	DT_CLK(NULL, "dpll_per_m4x2_ck", "dpll_per_m4x2_ck"),
+	DT_CLK(NULL, "dpll_per_m5x2_ck", "dpll_per_m5x2_ck"),
+	DT_CLK(NULL, "dpll_per_m6x2_ck", "dpll_per_m6x2_ck"),
+	DT_CLK(NULL, "dpll_per_m7x2_ck", "dpll_per_m7x2_ck"),
+	DT_CLK(NULL, "usb_hs_clk_div_ck", "usb_hs_clk_div_ck"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo_ck", "dpll_usb_clkdcoldo_ck"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "ducati_clk_mux_ck", "ducati_clk_mux_ck"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_24mc_fclk", "func_24mc_fclk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_48mc_fclk", "func_48mc_fclk"),
+	DT_CLK(NULL, "func_64m_fclk", "func_64m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "init_60m_fclk", "init_60m_fclk"),
+	DT_CLK(NULL, "l3_div_ck", "l3_div_ck"),
+	DT_CLK(NULL, "l4_div_ck", "l4_div_ck"),
+	DT_CLK(NULL, "lp_clk_div_ck", "lp_clk_div_ck"),
+	DT_CLK(NULL, "l4_wkup_clk_mux_ck", "l4_wkup_clk_mux_ck"),
+	DT_CLK("smp_twd", NULL, "mpu_periphclk"),
+	DT_CLK(NULL, "ocp_abe_iclk", "ocp_abe_iclk"),
+	DT_CLK(NULL, "per_abe_24m_fclk", "per_abe_24m_fclk"),
+	DT_CLK(NULL, "per_abe_nc_fclk", "per_abe_nc_fclk"),
+	DT_CLK(NULL, "syc_clk_div_ck", "syc_clk_div_ck"),
+	DT_CLK(NULL, "aes1_fck", "aes1_fck"),
+	DT_CLK(NULL, "aes2_fck", "aes2_fck"),
+	DT_CLK(NULL, "dmic_sync_mux_ck", "dmic_sync_mux_ck"),
+	DT_CLK(NULL, "func_dmic_abe_gfclk", "func_dmic_abe_gfclk"),
+	DT_CLK(NULL, "dss_sys_clk", "dss_sys_clk"),
+	DT_CLK(NULL, "dss_tv_clk", "dss_tv_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_fck", "dss_fck"),
+	DT_CLK("omapdss_dss", "ick", "dss_fck"),
+	DT_CLK(NULL, "fdif_fck", "fdif_fck"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "sgx_clk_mux", "sgx_clk_mux"),
+	DT_CLK(NULL, "hsi_fck", "hsi_fck"),
+	DT_CLK(NULL, "iss_ctrlclk", "iss_ctrlclk"),
+	DT_CLK(NULL, "mcasp_sync_mux_ck", "mcasp_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcasp_abe_gfclk", "func_mcasp_abe_gfclk"),
+	DT_CLK(NULL, "mcbsp1_sync_mux_ck", "mcbsp1_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp1_gfclk", "func_mcbsp1_gfclk"),
+	DT_CLK(NULL, "mcbsp2_sync_mux_ck", "mcbsp2_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp2_gfclk", "func_mcbsp2_gfclk"),
+	DT_CLK(NULL, "mcbsp3_sync_mux_ck", "mcbsp3_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp3_gfclk", "func_mcbsp3_gfclk"),
+	DT_CLK(NULL, "mcbsp4_sync_mux_ck", "mcbsp4_sync_mux_ck"),
+	DT_CLK(NULL, "per_mcbsp4_gfclk", "per_mcbsp4_gfclk"),
+	DT_CLK(NULL, "hsmmc1_fclk", "hsmmc1_fclk"),
+	DT_CLK(NULL, "hsmmc2_fclk", "hsmmc2_fclk"),
+	DT_CLK(NULL, "ocp2scp_usb_phy_phy_48m", "ocp2scp_usb_phy_phy_48m"),
+	DT_CLK(NULL, "sha2md5_fck", "sha2md5_fck"),
+	DT_CLK(NULL, "slimbus1_fclk_1", "slimbus1_fclk_1"),
+	DT_CLK(NULL, "slimbus1_fclk_0", "slimbus1_fclk_0"),
+	DT_CLK(NULL, "slimbus1_fclk_2", "slimbus1_fclk_2"),
+	DT_CLK(NULL, "slimbus1_slimbus_clk", "slimbus1_slimbus_clk"),
+	DT_CLK(NULL, "slimbus2_fclk_1", "slimbus2_fclk_1"),
+	DT_CLK(NULL, "slimbus2_fclk_0", "slimbus2_fclk_0"),
+	DT_CLK(NULL, "slimbus2_slimbus_clk", "slimbus2_slimbus_clk"),
+	DT_CLK(NULL, "smartreflex_core_fck", "smartreflex_core_fck"),
+	DT_CLK(NULL, "smartreflex_iva_fck", "smartreflex_iva_fck"),
+	DT_CLK(NULL, "smartreflex_mpu_fck", "smartreflex_mpu_fck"),
+	DT_CLK(NULL, "dmt1_clk_mux", "dmt1_clk_mux"),
+	DT_CLK(NULL, "cm2_dm10_mux", "cm2_dm10_mux"),
+	DT_CLK(NULL, "cm2_dm11_mux", "cm2_dm11_mux"),
+	DT_CLK(NULL, "cm2_dm2_mux", "cm2_dm2_mux"),
+	DT_CLK(NULL, "cm2_dm3_mux", "cm2_dm3_mux"),
+	DT_CLK(NULL, "cm2_dm4_mux", "cm2_dm4_mux"),
+	DT_CLK(NULL, "timer5_sync_mux", "timer5_sync_mux"),
+	DT_CLK(NULL, "timer6_sync_mux", "timer6_sync_mux"),
+	DT_CLK(NULL, "timer7_sync_mux", "timer7_sync_mux"),
+	DT_CLK(NULL, "timer8_sync_mux", "timer8_sync_mux"),
+	DT_CLK(NULL, "cm2_dm9_mux", "cm2_dm9_mux"),
+	DT_CLK(NULL, "usb_host_fs_fck", "usb_host_fs_fck"),
+	DT_CLK("usbhs_omap", "fs_fck", "usb_host_fs_fck"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "utmi_p1_gfclk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "usb_host_hs_utmi_p1_clk"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "utmi_p2_gfclk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "usb_host_hs_utmi_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "usb_host_hs_utmi_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "usb_host_hs_hsic480m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "usb_host_hs_hsic60m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "usb_host_hs_hsic60m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "usb_host_hs_hsic480m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_func48mclk", "usb_host_hs_func48mclk"),
+	DT_CLK(NULL, "usb_host_hs_fck", "usb_host_hs_fck"),
+	DT_CLK("usbhs_omap", "hs_fck", "usb_host_hs_fck"),
+	DT_CLK(NULL, "otg_60m_gfclk", "otg_60m_gfclk"),
+	DT_CLK(NULL, "usb_otg_hs_xclk", "usb_otg_hs_xclk"),
+	DT_CLK(NULL, "usb_otg_hs_ick", "usb_otg_hs_ick"),
+	DT_CLK("musb-omap2430", "ick", "usb_otg_hs_ick"),
+	DT_CLK(NULL, "usb_phy_cm_clk32k", "usb_phy_cm_clk32k"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "usb_tll_hs_usb_ch2_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "usb_tll_hs_usb_ch0_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "usb_tll_hs_usb_ch1_clk"),
+	DT_CLK(NULL, "usb_tll_hs_ick", "usb_tll_hs_ick"),
+	DT_CLK("usbhs_omap", "usbtll_ick", "usb_tll_hs_ick"),
+	DT_CLK("usbhs_tll", "usbtll_ick", "usb_tll_hs_ick"),
+	DT_CLK(NULL, "usim_ck", "usim_ck"),
+	DT_CLK(NULL, "usim_fclk", "usim_fclk"),
+	DT_CLK(NULL, "pmd_stm_clock_mux_ck", "pmd_stm_clock_mux_ck"),
+	DT_CLK(NULL, "pmd_trace_clk_mux_ck", "pmd_trace_clk_mux_ck"),
+	DT_CLK(NULL, "stm_clk_div_ck", "stm_clk_div_ck"),
+	DT_CLK(NULL, "trace_clk_div_ck", "trace_clk_div_ck"),
+	DT_CLK(NULL, "auxclk0_src_ck", "auxclk0_src_ck"),
+	DT_CLK(NULL, "auxclk0_ck", "auxclk0_ck"),
+	DT_CLK(NULL, "auxclkreq0_ck", "auxclkreq0_ck"),
+	DT_CLK(NULL, "auxclk1_src_ck", "auxclk1_src_ck"),
+	DT_CLK(NULL, "auxclk1_ck", "auxclk1_ck"),
+	DT_CLK(NULL, "auxclkreq1_ck", "auxclkreq1_ck"),
+	DT_CLK(NULL, "auxclk2_src_ck", "auxclk2_src_ck"),
+	DT_CLK(NULL, "auxclk2_ck", "auxclk2_ck"),
+	DT_CLK(NULL, "auxclkreq2_ck", "auxclkreq2_ck"),
+	DT_CLK(NULL, "auxclk3_src_ck", "auxclk3_src_ck"),
+	DT_CLK(NULL, "auxclk3_ck", "auxclk3_ck"),
+	DT_CLK(NULL, "auxclkreq3_ck", "auxclkreq3_ck"),
+	DT_CLK(NULL, "auxclk4_src_ck", "auxclk4_src_ck"),
+	DT_CLK(NULL, "auxclk4_ck", "auxclk4_ck"),
+	DT_CLK(NULL, "auxclkreq4_ck", "auxclkreq4_ck"),
+	DT_CLK(NULL, "auxclk5_src_ck", "auxclk5_src_ck"),
+	DT_CLK(NULL, "auxclk5_ck", "auxclk5_ck"),
+	DT_CLK(NULL, "auxclkreq5_ck", "auxclkreq5_ck"),
+	DT_CLK("50000000.gpmc", "fck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("usbhs_tll", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("omap_timer.1", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.2", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.3", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.4", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.9", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.10", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.11", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.5", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.6", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.7", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.8", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4a318000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48032000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48034000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48036000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("4803e000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48086000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48088000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("40138000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013a000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013c000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013e000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK(NULL, "cpufreq_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "bandgap_fclk", "bandgap_fclk"),
+	DT_CLK(NULL, "div_ts_ck", "div_ts_ck"),
+	DT_CLK(NULL, "bandgap_ts_fclk", "bandgap_ts_fclk"),
+	{ .node_name = NULL },
+};
+
+int __init omap4xxx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
+
+	ti_dt_clocks_register(omap44xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+	rc = clk_set_rate(usb_dpll, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+	/*
+	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
+	 * state when turning the ABE clock domain. Workaround this by
+	 * locking the ABE DPLL on boot.
+	 * Lock the ABE DPLL in any case to avoid issues with audio.
+	 */
+	abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_refclk_mux_ck");
+	sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
+	rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
+	abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
+	if (!rc)
+		rc = clk_set_rate(abe_dpll, OMAP4_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 231b071..2ce4586 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -225,6 +225,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
 int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+int omap2_clk_disable_autoidle_all(void);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -238,6 +239,8 @@ void ti_dt_clockdomains_setup(void);
 int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
+int omap4xxx_dt_clk_init(void);
+
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
 void of_ti_clk_deny_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 12/41] CLK: TI: add omap4 clock init file

[Tero Kristo]

clk-44xx.c now contains the clock init functionality for omap4, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock.h |    1 -
 drivers/clk/ti/Makefile     |    1 +
 drivers/clk/ti/clk-44xx.c   |  328 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h      |    3 +
 4 files changed, 332 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-44xx.c

diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 6bd72b5..b83fca6 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -247,7 +247,6 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 				void __iomem **idlest_reg,
 				u8 *idlest_bit, u8 *idlest_val);
 int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
 int omap2_clk_deny_idle(struct clk *clk);
 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index ef61d39..381f1f8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -2,4 +2,5 @@ ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o
+obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 endif
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
new file mode 100644
index 0000000..3e2090b
--- /dev/null
+++ b/drivers/clk/ti/clk-44xx.c
@@ -0,0 +1,328 @@
+/*
+ * OMAP4 Clock data
+ *
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley (paul at pwsan.com)
+ * Rajendra Nayak (rnayak at ti.com)
+ * Benoit Cousson (b-cousson at ti.com)
+ * Mike Turquette (mturquette at ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX Some of the ES1 clocks have been removed/changed; once support
+ * is added for discriminating clocks by ES level, these should be added back
+ * in.
+ *
+ * XXX All of the remaining MODULEMODE clock nodes should be removed
+ * once the drivers are updated to use pm_runtime or to use the appropriate
+ * upstream clock node for rate/parent selection.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+/*
+ * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
+ * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
+ * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
+ * half of this value.
+ */
+#define OMAP4_DPLL_ABE_DEFFREQ				98304000
+
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ				960000000
+
+static struct ti_dt_clk omap44xx_clks[] = {
+	DT_CLK(NULL, "extalt_clkin_ck", "extalt_clkin_ck"),
+	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
+	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
+	DT_CLK(NULL, "pad_slimbus_core_clks_ck", "pad_slimbus_core_clks_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "slimbus_src_clk", "slimbus_src_clk"),
+	DT_CLK(NULL, "slimbus_clk", "slimbus_clk"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tie_low_clock_ck", "tie_low_clock_ck"),
+	DT_CLK(NULL, "utmi_phy_clkout_ck", "utmi_phy_clkout_ck"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "xclk60mhsp1_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "xclk60mhsp2_ck"),
+	DT_CLK(NULL, "xclk60motg_ck", "xclk60motg_ck"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux_ck", "abe_dpll_bypass_clk_mux_ck"),
+	DT_CLK(NULL, "abe_dpll_refclk_mux_ck", "abe_dpll_refclk_mux_ck"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "core_hsd_byp_clk_mux_ck", "core_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m6x2_ck", "dpll_core_m6x2_ck"),
+	DT_CLK(NULL, "dbgclk_mux_ck", "dbgclk_mux_ck"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "ddrphy_ck", "ddrphy_ck"),
+	DT_CLK(NULL, "dpll_core_m5x2_ck", "dpll_core_m5x2_ck"),
+	DT_CLK(NULL, "div_core_ck", "div_core_ck"),
+	DT_CLK(NULL, "div_iva_hs_clk", "div_iva_hs_clk"),
+	DT_CLK(NULL, "div_mpu_hs_clk", "div_mpu_hs_clk"),
+	DT_CLK(NULL, "dpll_core_m4x2_ck", "dpll_core_m4x2_ck"),
+	DT_CLK(NULL, "dll_clk_div_ck", "dll_clk_div_ck"),
+	DT_CLK(NULL, "dpll_abe_m2_ck", "dpll_abe_m2_ck"),
+	DT_CLK(NULL, "dpll_core_m3x2_ck", "dpll_core_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_m7x2_ck", "dpll_core_m7x2_ck"),
+	DT_CLK(NULL, "iva_hsd_byp_clk_mux_ck", "iva_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_x2_ck", "dpll_iva_x2_ck"),
+	DT_CLK(NULL, "dpll_iva_m4x2_ck", "dpll_iva_m4x2_ck"),
+	DT_CLK(NULL, "dpll_iva_m5x2_ck", "dpll_iva_m5x2_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "per_hs_clk_div_ck", "per_hs_clk_div_ck"),
+	DT_CLK(NULL, "per_hsd_byp_clk_mux_ck", "per_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_per_m3x2_ck", "dpll_per_m3x2_ck"),
+	DT_CLK(NULL, "dpll_per_m4x2_ck", "dpll_per_m4x2_ck"),
+	DT_CLK(NULL, "dpll_per_m5x2_ck", "dpll_per_m5x2_ck"),
+	DT_CLK(NULL, "dpll_per_m6x2_ck", "dpll_per_m6x2_ck"),
+	DT_CLK(NULL, "dpll_per_m7x2_ck", "dpll_per_m7x2_ck"),
+	DT_CLK(NULL, "usb_hs_clk_div_ck", "usb_hs_clk_div_ck"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo_ck", "dpll_usb_clkdcoldo_ck"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "ducati_clk_mux_ck", "ducati_clk_mux_ck"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_24mc_fclk", "func_24mc_fclk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_48mc_fclk", "func_48mc_fclk"),
+	DT_CLK(NULL, "func_64m_fclk", "func_64m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "init_60m_fclk", "init_60m_fclk"),
+	DT_CLK(NULL, "l3_div_ck", "l3_div_ck"),
+	DT_CLK(NULL, "l4_div_ck", "l4_div_ck"),
+	DT_CLK(NULL, "lp_clk_div_ck", "lp_clk_div_ck"),
+	DT_CLK(NULL, "l4_wkup_clk_mux_ck", "l4_wkup_clk_mux_ck"),
+	DT_CLK("smp_twd", NULL, "mpu_periphclk"),
+	DT_CLK(NULL, "ocp_abe_iclk", "ocp_abe_iclk"),
+	DT_CLK(NULL, "per_abe_24m_fclk", "per_abe_24m_fclk"),
+	DT_CLK(NULL, "per_abe_nc_fclk", "per_abe_nc_fclk"),
+	DT_CLK(NULL, "syc_clk_div_ck", "syc_clk_div_ck"),
+	DT_CLK(NULL, "aes1_fck", "aes1_fck"),
+	DT_CLK(NULL, "aes2_fck", "aes2_fck"),
+	DT_CLK(NULL, "dmic_sync_mux_ck", "dmic_sync_mux_ck"),
+	DT_CLK(NULL, "func_dmic_abe_gfclk", "func_dmic_abe_gfclk"),
+	DT_CLK(NULL, "dss_sys_clk", "dss_sys_clk"),
+	DT_CLK(NULL, "dss_tv_clk", "dss_tv_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_fck", "dss_fck"),
+	DT_CLK("omapdss_dss", "ick", "dss_fck"),
+	DT_CLK(NULL, "fdif_fck", "fdif_fck"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "sgx_clk_mux", "sgx_clk_mux"),
+	DT_CLK(NULL, "hsi_fck", "hsi_fck"),
+	DT_CLK(NULL, "iss_ctrlclk", "iss_ctrlclk"),
+	DT_CLK(NULL, "mcasp_sync_mux_ck", "mcasp_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcasp_abe_gfclk", "func_mcasp_abe_gfclk"),
+	DT_CLK(NULL, "mcbsp1_sync_mux_ck", "mcbsp1_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp1_gfclk", "func_mcbsp1_gfclk"),
+	DT_CLK(NULL, "mcbsp2_sync_mux_ck", "mcbsp2_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp2_gfclk", "func_mcbsp2_gfclk"),
+	DT_CLK(NULL, "mcbsp3_sync_mux_ck", "mcbsp3_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp3_gfclk", "func_mcbsp3_gfclk"),
+	DT_CLK(NULL, "mcbsp4_sync_mux_ck", "mcbsp4_sync_mux_ck"),
+	DT_CLK(NULL, "per_mcbsp4_gfclk", "per_mcbsp4_gfclk"),
+	DT_CLK(NULL, "hsmmc1_fclk", "hsmmc1_fclk"),
+	DT_CLK(NULL, "hsmmc2_fclk", "hsmmc2_fclk"),
+	DT_CLK(NULL, "ocp2scp_usb_phy_phy_48m", "ocp2scp_usb_phy_phy_48m"),
+	DT_CLK(NULL, "sha2md5_fck", "sha2md5_fck"),
+	DT_CLK(NULL, "slimbus1_fclk_1", "slimbus1_fclk_1"),
+	DT_CLK(NULL, "slimbus1_fclk_0", "slimbus1_fclk_0"),
+	DT_CLK(NULL, "slimbus1_fclk_2", "slimbus1_fclk_2"),
+	DT_CLK(NULL, "slimbus1_slimbus_clk", "slimbus1_slimbus_clk"),
+	DT_CLK(NULL, "slimbus2_fclk_1", "slimbus2_fclk_1"),
+	DT_CLK(NULL, "slimbus2_fclk_0", "slimbus2_fclk_0"),
+	DT_CLK(NULL, "slimbus2_slimbus_clk", "slimbus2_slimbus_clk"),
+	DT_CLK(NULL, "smartreflex_core_fck", "smartreflex_core_fck"),
+	DT_CLK(NULL, "smartreflex_iva_fck", "smartreflex_iva_fck"),
+	DT_CLK(NULL, "smartreflex_mpu_fck", "smartreflex_mpu_fck"),
+	DT_CLK(NULL, "dmt1_clk_mux", "dmt1_clk_mux"),
+	DT_CLK(NULL, "cm2_dm10_mux", "cm2_dm10_mux"),
+	DT_CLK(NULL, "cm2_dm11_mux", "cm2_dm11_mux"),
+	DT_CLK(NULL, "cm2_dm2_mux", "cm2_dm2_mux"),
+	DT_CLK(NULL, "cm2_dm3_mux", "cm2_dm3_mux"),
+	DT_CLK(NULL, "cm2_dm4_mux", "cm2_dm4_mux"),
+	DT_CLK(NULL, "timer5_sync_mux", "timer5_sync_mux"),
+	DT_CLK(NULL, "timer6_sync_mux", "timer6_sync_mux"),
+	DT_CLK(NULL, "timer7_sync_mux", "timer7_sync_mux"),
+	DT_CLK(NULL, "timer8_sync_mux", "timer8_sync_mux"),
+	DT_CLK(NULL, "cm2_dm9_mux", "cm2_dm9_mux"),
+	DT_CLK(NULL, "usb_host_fs_fck", "usb_host_fs_fck"),
+	DT_CLK("usbhs_omap", "fs_fck", "usb_host_fs_fck"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "utmi_p1_gfclk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "usb_host_hs_utmi_p1_clk"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "utmi_p2_gfclk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "usb_host_hs_utmi_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "usb_host_hs_utmi_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "usb_host_hs_hsic480m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "usb_host_hs_hsic60m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "usb_host_hs_hsic60m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "usb_host_hs_hsic480m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_func48mclk", "usb_host_hs_func48mclk"),
+	DT_CLK(NULL, "usb_host_hs_fck", "usb_host_hs_fck"),
+	DT_CLK("usbhs_omap", "hs_fck", "usb_host_hs_fck"),
+	DT_CLK(NULL, "otg_60m_gfclk", "otg_60m_gfclk"),
+	DT_CLK(NULL, "usb_otg_hs_xclk", "usb_otg_hs_xclk"),
+	DT_CLK(NULL, "usb_otg_hs_ick", "usb_otg_hs_ick"),
+	DT_CLK("musb-omap2430", "ick", "usb_otg_hs_ick"),
+	DT_CLK(NULL, "usb_phy_cm_clk32k", "usb_phy_cm_clk32k"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "usb_tll_hs_usb_ch2_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "usb_tll_hs_usb_ch0_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "usb_tll_hs_usb_ch1_clk"),
+	DT_CLK(NULL, "usb_tll_hs_ick", "usb_tll_hs_ick"),
+	DT_CLK("usbhs_omap", "usbtll_ick", "usb_tll_hs_ick"),
+	DT_CLK("usbhs_tll", "usbtll_ick", "usb_tll_hs_ick"),
+	DT_CLK(NULL, "usim_ck", "usim_ck"),
+	DT_CLK(NULL, "usim_fclk", "usim_fclk"),
+	DT_CLK(NULL, "pmd_stm_clock_mux_ck", "pmd_stm_clock_mux_ck"),
+	DT_CLK(NULL, "pmd_trace_clk_mux_ck", "pmd_trace_clk_mux_ck"),
+	DT_CLK(NULL, "stm_clk_div_ck", "stm_clk_div_ck"),
+	DT_CLK(NULL, "trace_clk_div_ck", "trace_clk_div_ck"),
+	DT_CLK(NULL, "auxclk0_src_ck", "auxclk0_src_ck"),
+	DT_CLK(NULL, "auxclk0_ck", "auxclk0_ck"),
+	DT_CLK(NULL, "auxclkreq0_ck", "auxclkreq0_ck"),
+	DT_CLK(NULL, "auxclk1_src_ck", "auxclk1_src_ck"),
+	DT_CLK(NULL, "auxclk1_ck", "auxclk1_ck"),
+	DT_CLK(NULL, "auxclkreq1_ck", "auxclkreq1_ck"),
+	DT_CLK(NULL, "auxclk2_src_ck", "auxclk2_src_ck"),
+	DT_CLK(NULL, "auxclk2_ck", "auxclk2_ck"),
+	DT_CLK(NULL, "auxclkreq2_ck", "auxclkreq2_ck"),
+	DT_CLK(NULL, "auxclk3_src_ck", "auxclk3_src_ck"),
+	DT_CLK(NULL, "auxclk3_ck", "auxclk3_ck"),
+	DT_CLK(NULL, "auxclkreq3_ck", "auxclkreq3_ck"),
+	DT_CLK(NULL, "auxclk4_src_ck", "auxclk4_src_ck"),
+	DT_CLK(NULL, "auxclk4_ck", "auxclk4_ck"),
+	DT_CLK(NULL, "auxclkreq4_ck", "auxclkreq4_ck"),
+	DT_CLK(NULL, "auxclk5_src_ck", "auxclk5_src_ck"),
+	DT_CLK(NULL, "auxclk5_ck", "auxclk5_ck"),
+	DT_CLK(NULL, "auxclkreq5_ck", "auxclkreq5_ck"),
+	DT_CLK("50000000.gpmc", "fck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("usbhs_tll", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("omap_timer.1", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.2", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.3", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.4", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.9", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.10", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.11", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.5", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.6", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.7", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.8", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4a318000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48032000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48034000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48036000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("4803e000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48086000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48088000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("40138000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013a000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013c000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013e000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK(NULL, "cpufreq_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "bandgap_fclk", "bandgap_fclk"),
+	DT_CLK(NULL, "div_ts_ck", "div_ts_ck"),
+	DT_CLK(NULL, "bandgap_ts_fclk", "bandgap_ts_fclk"),
+	{ .node_name = NULL },
+};
+
+int __init omap4xxx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
+
+	ti_dt_clocks_register(omap44xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+	rc = clk_set_rate(usb_dpll, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+	/*
+	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
+	 * state when turning the ABE clock domain. Workaround this by
+	 * locking the ABE DPLL on boot.
+	 * Lock the ABE DPLL in any case to avoid issues with audio.
+	 */
+	abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_refclk_mux_ck");
+	sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
+	rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
+	abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
+	if (!rc)
+		rc = clk_set_rate(abe_dpll, OMAP4_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 231b071..2ce4586 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -225,6 +225,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
 int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+int omap2_clk_disable_autoidle_all(void);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -238,6 +239,8 @@ void ti_dt_clockdomains_setup(void);
 int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
+int omap4xxx_dt_clk_init(void);
+
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
 void of_ti_clk_deny_autoidle_all(void);
-- 
1.7.9.5

Re: [PATCHv10 12/41] CLK: TI: add omap4 clock init file

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> clk-44xx.c now contains the clock init functionality for omap4, including
> DT clock registration and adding of static clkdev entries.

...

> diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
> new file mode 100644
> index 0000000..3e2090b
> --- /dev/null
> +++ b/drivers/clk/ti/clk-44xx.c
> @@ -0,0 +1,328 @@
> +/*
> + * OMAP4 Clock data
> + *
> + * Copyright (C) 2009-2012 Texas Instruments, Inc.
> + * Copyright (C) 2009-2010 Nokia Corporation
> + *
> + * Paul Walmsley (paul@pwsan.com)

Please remove my name and E-mail address from this file.


- Paul

[PATCHv10 12/41] CLK: TI: add omap4 clock init file

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> clk-44xx.c now contains the clock init functionality for omap4, including
> DT clock registration and adding of static clkdev entries.

...

> diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
> new file mode 100644
> index 0000000..3e2090b
> --- /dev/null
> +++ b/drivers/clk/ti/clk-44xx.c
> @@ -0,0 +1,328 @@
> +/*
> + * OMAP4 Clock data
> + *
> + * Copyright (C) 2009-2012 Texas Instruments, Inc.
> + * Copyright (C) 2009-2010 Nokia Corporation
> + *
> + * Paul Walmsley (paul at pwsan.com)

Please remove my name and E-mail address from this file.


- Paul

[PATCHv10 14/41] CLK: TI: omap5: Initialize USB_DPLL at boot

[Tero Kristo]

From: Roger Quadros <rogerq@ti.com>

USB_DPLL must be initialized and locked at boot so that
USB modules can work.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/clk-54xx.c |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index c876e6e..0ef9f58 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -19,6 +19,12 @@
 
 #define OMAP5_DPLL_ABE_DEFFREQ				98304000
 
+/*
+ * OMAP543x TRM, section "3.6.3.9.5 DPLL_USB Preferred Settings"
+ * states it must be at 960MHz
+ */
+#define OMAP5_DPLL_USB_DEFFREQ				960000000
+
 static struct ti_dt_clk omap54xx_clks[] = {
 	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
 	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
@@ -220,7 +226,7 @@ static struct ti_dt_clk omap54xx_clks[] = {
 int __init omap5xxx_dt_clk_init(void)
 {
 	int rc;
-	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
 
 	ti_dt_clocks_register(omap54xx_clks);
 
@@ -235,5 +241,15 @@ int __init omap5xxx_dt_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+	rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_m2_ck");
+	rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ/2);
+	if (rc)
+		pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);
+
 	return 0;
 }
-- 
1.7.9.5

[PATCHv10 14/41] CLK: TI: omap5: Initialize USB_DPLL at boot

[Tero Kristo]

From: Roger Quadros <rogerq@ti.com>

USB_DPLL must be initialized and locked at boot so that
USB modules can work.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/clk-54xx.c |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index c876e6e..0ef9f58 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -19,6 +19,12 @@
 
 #define OMAP5_DPLL_ABE_DEFFREQ				98304000
 
+/*
+ * OMAP543x TRM, section "3.6.3.9.5 DPLL_USB Preferred Settings"
+ * states it must be at 960MHz
+ */
+#define OMAP5_DPLL_USB_DEFFREQ				960000000
+
 static struct ti_dt_clk omap54xx_clks[] = {
 	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
 	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
@@ -220,7 +226,7 @@ static struct ti_dt_clk omap54xx_clks[] = {
 int __init omap5xxx_dt_clk_init(void)
 {
 	int rc;
-	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
 
 	ti_dt_clocks_register(omap54xx_clks);
 
@@ -235,5 +241,15 @@ int __init omap5xxx_dt_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+	rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_m2_ck");
+	rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ/2);
+	if (rc)
+		pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);
+
 	return 0;
 }
-- 
1.7.9.5

[PATCHv10 15/41] CLK: TI: DRA7: Add APLL support

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

The patch adds support for DRA7 PCIe APLL. The APLL
sources the optional functional clocks for PCIe module.

APLL stands for Analog PLL. This is different when comapred
with DPLL meaning Digital PLL, the phase detection is done
using an analog circuit.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/apll.c                              |  239 ++++++++++++++++++++
 3 files changed, 271 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
 create mode 100644 drivers/clk/ti/apll.c

diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
new file mode 100644
index 0000000..7faf5a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -0,0 +1,31 @@
+Binding for Texas Instruments APLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped APLL with usually two selectable input clocks
+(reference clock and bypass clock), with analog phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) APLL mostly behaves like
+a subtype of a DPLL [2], although a simplified one at that.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-apll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the APLL.
+  It contains the information of registers in the following order:
+	"control" - contains the control register base address
+	"idlest" - contains the idlest register base address
+
+Examples:
+	apll_pcie_ck: apll_pcie_ck@4a008200 {
+		#clock-cells = <0>;
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x4a00821c 0x4>, <0x4a008220 0x4>;
+		compatible = "ti,dra7-apll-clock";
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 935e5d2..3d71e1e 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o mux.o
+					   composite.o mux.o apll.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 endif
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
new file mode 100644
index 0000000..5402b45
--- /dev/null
+++ b/drivers/clk/ti/apll.c
@@ -0,0 +1,239 @@
+/*
+ * OMAP APLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * J Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#define APLL_FORCE_LOCK 0x1
+#define APLL_AUTO_IDLE	0x2
+#define MAX_APLL_WAIT_TRIES		1000000
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static int dra7_apll_enable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int r = 0, i = 0;
+	struct dpll_data *ad;
+	const char *clk_name;
+	u8 state = 1;
+	u32 v;
+
+	ad = clk->dpll_data;
+	if (!ad)
+		return -EINVAL;
+
+	clk_name = __clk_get_name(clk->hw.clk);
+
+	state <<= __ffs(ad->idlest_mask);
+
+	/* Check is already locked */
+	v = clk_readl(ad->idlest_reg);
+
+	if ((v & ad->idlest_mask) == state)
+		return r;
+
+	v = clk_readl(ad->control_reg);
+	v &= ~ad->enable_mask;
+	v |= APLL_FORCE_LOCK << __ffs(ad->enable_mask);
+	clk_writel(v, ad->control_reg);
+
+	state <<= __ffs(ad->idlest_mask);
+
+	while (1) {
+		v = clk_readl(ad->idlest_reg);
+		if ((v & ad->idlest_mask) == state)
+			break;
+		if (i > MAX_APLL_WAIT_TRIES)
+			break;
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_APLL_WAIT_TRIES) {
+		pr_warn("clock: %s failed transition to '%s'\n",
+			clk_name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk_name, (state) ? "locked" : "bypassed", i);
+
+		r = 0;
+	}
+
+	return r;
+}
+
+static void dra7_apll_disable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *ad;
+	u8 state = 1;
+	u32 v;
+
+	ad = clk->dpll_data;
+
+	state <<= __ffs(ad->idlest_mask);
+
+	v = clk_readl(ad->control_reg);
+	v &= ~ad->enable_mask;
+	v |= APLL_AUTO_IDLE << __ffs(ad->enable_mask);
+	clk_writel(v, ad->control_reg);
+}
+
+static int dra7_apll_is_enabled(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *ad;
+	u32 v;
+
+	ad = clk->dpll_data;
+
+	v = clk_readl(ad->control_reg);
+	v &= ad->enable_mask;
+
+	v >>= __ffs(ad->enable_mask);
+
+	return v == APLL_AUTO_IDLE ? 0 : 1;
+}
+
+static u8 dra7_init_apll_parent(struct clk_hw *hw)
+{
+	return 0;
+}
+
+static const struct clk_ops apll_ck_ops = {
+	.enable		= &dra7_apll_enable,
+	.disable	= &dra7_apll_disable,
+	.is_enabled	= &dra7_apll_is_enabled,
+	.get_parent	= &dra7_init_apll_parent,
+};
+
+static struct clk *omap_clk_register_apll(struct device *dev, const char *name,
+		const char **parent_names, int num_parents, unsigned long flags,
+		struct dpll_data *dpll_data, const char *clkdm_name,
+		const struct clk_ops *ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return ERR_PTR(-ENOMEM);
+
+	clk_hw->dpll_data = dpll_data;
+	clk_hw->hw.init = &init;
+	clk_hw->flags = REGMAP_ADDRESSING;
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	/* register the clock */
+	clk = clk_register(dev, &clk_hw->hw);
+
+	return clk;
+}
+
+static int __init of_dra7_apll_setup(struct device_node *node)
+{
+	const struct clk_ops *ops;
+	struct clk *clk;
+	const char *clk_name = node->name;
+	int num_parents;
+	const char **parent_names = NULL;
+	u8 apll_flags = 0;
+	struct dpll_data *ad;
+	u32 idlest_mask = 0x1;
+	u32 autoidle_mask = 0x3;
+	int i;
+	int ret;
+
+	ops = &apll_ck_ops;
+	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+	if (!ad)
+		return -ENOMEM;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	num_parents = of_clk_get_parent_count(node);
+	if (num_parents < 1) {
+		pr_err("dra7 apll %s must have parent(s)\n", node->name);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	ad->clk_ref = of_clk_get(node, 0);
+	ad->clk_bypass = of_clk_get(node, 1);
+
+	if (IS_ERR(ad->clk_ref)) {
+		pr_debug("ti,clk-ref for %s not found\n", clk_name);
+		ret = -EAGAIN;
+		goto cleanup;
+	}
+
+	if (IS_ERR(ad->clk_bypass)) {
+		pr_debug("ti,clk-bypass for %s not found\n", clk_name);
+		ret = -EAGAIN;
+		goto cleanup;
+	}
+
+	ad->control_reg = ti_clk_get_reg_addr(node, 0);
+	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
+
+	if (!ad->control_reg || !ad->idlest_reg) {
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	ad->idlest_mask = idlest_mask;
+	ad->enable_mask = autoidle_mask;
+
+	clk = omap_clk_register_apll(NULL, clk_name, parent_names,
+				num_parents, apll_flags, ad,
+				NULL, ops);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+
+cleanup:
+	kfree(parent_names);
+	kfree(ad);
+	return ret;
+}
+CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup);
-- 
1.7.9.5

[PATCHv10 15/41] CLK: TI: DRA7: Add APLL support

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

The patch adds support for DRA7 PCIe APLL. The APLL
sources the optional functional clocks for PCIe module.

APLL stands for Analog PLL. This is different when comapred
with DPLL meaning Digital PLL, the phase detection is done
using an analog circuit.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/apll.c                              |  239 ++++++++++++++++++++
 3 files changed, 271 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
 create mode 100644 drivers/clk/ti/apll.c

diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
new file mode 100644
index 0000000..7faf5a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -0,0 +1,31 @@
+Binding for Texas Instruments APLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped APLL with usually two selectable input clocks
+(reference clock and bypass clock), with analog phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) APLL mostly behaves like
+a subtype of a DPLL [2], although a simplified one at that.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-apll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the APLL.
+  It contains the information of registers in the following order:
+	"control" - contains the control register base address
+	"idlest" - contains the idlest register base address
+
+Examples:
+	apll_pcie_ck: apll_pcie_ck at 4a008200 {
+		#clock-cells = <0>;
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x4a00821c 0x4>, <0x4a008220 0x4>;
+		compatible = "ti,dra7-apll-clock";
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 935e5d2..3d71e1e 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o mux.o
+					   composite.o mux.o apll.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 endif
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
new file mode 100644
index 0000000..5402b45
--- /dev/null
+++ b/drivers/clk/ti/apll.c
@@ -0,0 +1,239 @@
+/*
+ * OMAP APLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * J Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#define APLL_FORCE_LOCK 0x1
+#define APLL_AUTO_IDLE	0x2
+#define MAX_APLL_WAIT_TRIES		1000000
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static int dra7_apll_enable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int r = 0, i = 0;
+	struct dpll_data *ad;
+	const char *clk_name;
+	u8 state = 1;
+	u32 v;
+
+	ad = clk->dpll_data;
+	if (!ad)
+		return -EINVAL;
+
+	clk_name = __clk_get_name(clk->hw.clk);
+
+	state <<= __ffs(ad->idlest_mask);
+
+	/* Check is already locked */
+	v = clk_readl(ad->idlest_reg);
+
+	if ((v & ad->idlest_mask) == state)
+		return r;
+
+	v = clk_readl(ad->control_reg);
+	v &= ~ad->enable_mask;
+	v |= APLL_FORCE_LOCK << __ffs(ad->enable_mask);
+	clk_writel(v, ad->control_reg);
+
+	state <<= __ffs(ad->idlest_mask);
+
+	while (1) {
+		v = clk_readl(ad->idlest_reg);
+		if ((v & ad->idlest_mask) == state)
+			break;
+		if (i > MAX_APLL_WAIT_TRIES)
+			break;
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_APLL_WAIT_TRIES) {
+		pr_warn("clock: %s failed transition to '%s'\n",
+			clk_name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk_name, (state) ? "locked" : "bypassed", i);
+
+		r = 0;
+	}
+
+	return r;
+}
+
+static void dra7_apll_disable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *ad;
+	u8 state = 1;
+	u32 v;
+
+	ad = clk->dpll_data;
+
+	state <<= __ffs(ad->idlest_mask);
+
+	v = clk_readl(ad->control_reg);
+	v &= ~ad->enable_mask;
+	v |= APLL_AUTO_IDLE << __ffs(ad->enable_mask);
+	clk_writel(v, ad->control_reg);
+}
+
+static int dra7_apll_is_enabled(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *ad;
+	u32 v;
+
+	ad = clk->dpll_data;
+
+	v = clk_readl(ad->control_reg);
+	v &= ad->enable_mask;
+
+	v >>= __ffs(ad->enable_mask);
+
+	return v == APLL_AUTO_IDLE ? 0 : 1;
+}
+
+static u8 dra7_init_apll_parent(struct clk_hw *hw)
+{
+	return 0;
+}
+
+static const struct clk_ops apll_ck_ops = {
+	.enable		= &dra7_apll_enable,
+	.disable	= &dra7_apll_disable,
+	.is_enabled	= &dra7_apll_is_enabled,
+	.get_parent	= &dra7_init_apll_parent,
+};
+
+static struct clk *omap_clk_register_apll(struct device *dev, const char *name,
+		const char **parent_names, int num_parents, unsigned long flags,
+		struct dpll_data *dpll_data, const char *clkdm_name,
+		const struct clk_ops *ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return ERR_PTR(-ENOMEM);
+
+	clk_hw->dpll_data = dpll_data;
+	clk_hw->hw.init = &init;
+	clk_hw->flags = REGMAP_ADDRESSING;
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	/* register the clock */
+	clk = clk_register(dev, &clk_hw->hw);
+
+	return clk;
+}
+
+static int __init of_dra7_apll_setup(struct device_node *node)
+{
+	const struct clk_ops *ops;
+	struct clk *clk;
+	const char *clk_name = node->name;
+	int num_parents;
+	const char **parent_names = NULL;
+	u8 apll_flags = 0;
+	struct dpll_data *ad;
+	u32 idlest_mask = 0x1;
+	u32 autoidle_mask = 0x3;
+	int i;
+	int ret;
+
+	ops = &apll_ck_ops;
+	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+	if (!ad)
+		return -ENOMEM;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	num_parents = of_clk_get_parent_count(node);
+	if (num_parents < 1) {
+		pr_err("dra7 apll %s must have parent(s)\n", node->name);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	ad->clk_ref = of_clk_get(node, 0);
+	ad->clk_bypass = of_clk_get(node, 1);
+
+	if (IS_ERR(ad->clk_ref)) {
+		pr_debug("ti,clk-ref for %s not found\n", clk_name);
+		ret = -EAGAIN;
+		goto cleanup;
+	}
+
+	if (IS_ERR(ad->clk_bypass)) {
+		pr_debug("ti,clk-bypass for %s not found\n", clk_name);
+		ret = -EAGAIN;
+		goto cleanup;
+	}
+
+	ad->control_reg = ti_clk_get_reg_addr(node, 0);
+	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
+
+	if (!ad->control_reg || !ad->idlest_reg) {
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	ad->idlest_mask = idlest_mask;
+	ad->enable_mask = autoidle_mask;
+
+	clk = omap_clk_register_apll(NULL, clk_name, parent_names,
+				num_parents, apll_flags, ad,
+				NULL, ops);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+
+cleanup:
+	kfree(parent_names);
+	kfree(ad);
+	return ret;
+}
+CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup);
-- 
1.7.9.5

Re: [PATCHv10 15/41] CLK: TI: DRA7: Add APLL support

[Alexander Aring]

Hi,

On Tue, Nov 26, 2013 at 10:05:56AM +0200, Tero Kristo wrote:
> From: J Keerthy <j-keerthy@ti.com>
> 
> The patch adds support for DRA7 PCIe APLL. The APLL
> sources the optional functional clocks for PCIe module.
> 
> APLL stands for Analog PLL. This is different when comapred
> with DPLL meaning Digital PLL, the phase detection is done
> using an analog circuit.
> 
> Signed-off-by: J Keerthy <j-keerthy@ti.com>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
>  drivers/clk/ti/Makefile                            |    2 +-
>  drivers/clk/ti/apll.c                              |  239 ++++++++++++++++++++
>  3 files changed, 271 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
>  create mode 100644 drivers/clk/ti/apll.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
> new file mode 100644
> index 0000000..7faf5a6
...
> +
> +static int __init of_dra7_apll_setup(struct device_node *node)
> +{
> +	const struct clk_ops *ops;
> +	struct clk *clk;
> +	const char *clk_name = node->name;
> +	int num_parents;
> +	const char **parent_names = NULL;
> +	u8 apll_flags = 0;
> +	struct dpll_data *ad;
> +	u32 idlest_mask = 0x1;
> +	u32 autoidle_mask = 0x3;
> +	int i;
> +	int ret;
> +
> +	ops = &apll_ck_ops;
> +	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
> +	if (!ad)
> +		return -ENOMEM;
> +
> +	of_property_read_string(node, "clock-output-names", &clk_name);
> +
> +	num_parents = of_clk_get_parent_count(node);
> +	if (num_parents < 1) {
> +		pr_err("dra7 apll %s must have parent(s)\n", node->name);
> +		ret = -EINVAL;
> +		goto cleanup;
> +	}
> +
> +	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
> +
> +	for (i = 0; i < num_parents; i++)
> +		parent_names[i] = of_clk_get_parent_name(node, i);
> +
> +	ad->clk_ref = of_clk_get(node, 0);
> +	ad->clk_bypass = of_clk_get(node, 1);
> +
> +	if (IS_ERR(ad->clk_ref)) {
> +		pr_debug("ti,clk-ref for %s not found\n", clk_name);
> +		ret = -EAGAIN;
> +		goto cleanup;
> +	}
> +
> +	if (IS_ERR(ad->clk_bypass)) {
> +		pr_debug("ti,clk-bypass for %s not found\n", clk_name);
> +		ret = -EAGAIN;
> +		goto cleanup;
> +	}
> +
> +	ad->control_reg = ti_clk_get_reg_addr(node, 0);
> +	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
> +
> +	if (!ad->control_reg || !ad->idlest_reg) {
> +		ret = -EINVAL;
> +		goto cleanup;
> +	}
> +
> +	ad->idlest_mask = idlest_mask;
> +	ad->enable_mask = autoidle_mask;
> +
> +	clk = omap_clk_register_apll(NULL, clk_name, parent_names,
> +				num_parents, apll_flags, ad,
> +				NULL, ops);
> +
> +	if (!IS_ERR(clk)) {
> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +		return 0;
> +	}
> +

Should we not also here do a cleanup for allocated memory?

> +	return PTR_ERR(clk);
> +
> +cleanup:
> +	kfree(parent_names);
> +	kfree(ad);
> +	return ret;
> +}
> +CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup);

- Alex

[PATCHv10 15/41] CLK: TI: DRA7: Add APLL support

[Alexander Aring]

Hi,

On Tue, Nov 26, 2013 at 10:05:56AM +0200, Tero Kristo wrote:
> From: J Keerthy <j-keerthy@ti.com>
> 
> The patch adds support for DRA7 PCIe APLL. The APLL
> sources the optional functional clocks for PCIe module.
> 
> APLL stands for Analog PLL. This is different when comapred
> with DPLL meaning Digital PLL, the phase detection is done
> using an analog circuit.
> 
> Signed-off-by: J Keerthy <j-keerthy@ti.com>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
>  drivers/clk/ti/Makefile                            |    2 +-
>  drivers/clk/ti/apll.c                              |  239 ++++++++++++++++++++
>  3 files changed, 271 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
>  create mode 100644 drivers/clk/ti/apll.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
> new file mode 100644
> index 0000000..7faf5a6
...
> +
> +static int __init of_dra7_apll_setup(struct device_node *node)
> +{
> +	const struct clk_ops *ops;
> +	struct clk *clk;
> +	const char *clk_name = node->name;
> +	int num_parents;
> +	const char **parent_names = NULL;
> +	u8 apll_flags = 0;
> +	struct dpll_data *ad;
> +	u32 idlest_mask = 0x1;
> +	u32 autoidle_mask = 0x3;
> +	int i;
> +	int ret;
> +
> +	ops = &apll_ck_ops;
> +	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
> +	if (!ad)
> +		return -ENOMEM;
> +
> +	of_property_read_string(node, "clock-output-names", &clk_name);
> +
> +	num_parents = of_clk_get_parent_count(node);
> +	if (num_parents < 1) {
> +		pr_err("dra7 apll %s must have parent(s)\n", node->name);
> +		ret = -EINVAL;
> +		goto cleanup;
> +	}
> +
> +	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
> +
> +	for (i = 0; i < num_parents; i++)
> +		parent_names[i] = of_clk_get_parent_name(node, i);
> +
> +	ad->clk_ref = of_clk_get(node, 0);
> +	ad->clk_bypass = of_clk_get(node, 1);
> +
> +	if (IS_ERR(ad->clk_ref)) {
> +		pr_debug("ti,clk-ref for %s not found\n", clk_name);
> +		ret = -EAGAIN;
> +		goto cleanup;
> +	}
> +
> +	if (IS_ERR(ad->clk_bypass)) {
> +		pr_debug("ti,clk-bypass for %s not found\n", clk_name);
> +		ret = -EAGAIN;
> +		goto cleanup;
> +	}
> +
> +	ad->control_reg = ti_clk_get_reg_addr(node, 0);
> +	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
> +
> +	if (!ad->control_reg || !ad->idlest_reg) {
> +		ret = -EINVAL;
> +		goto cleanup;
> +	}
> +
> +	ad->idlest_mask = idlest_mask;
> +	ad->enable_mask = autoidle_mask;
> +
> +	clk = omap_clk_register_apll(NULL, clk_name, parent_names,
> +				num_parents, apll_flags, ad,
> +				NULL, ops);
> +
> +	if (!IS_ERR(clk)) {
> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +		return 0;
> +	}
> +

Should we not also here do a cleanup for allocated memory?

> +	return PTR_ERR(clk);
> +
> +cleanup:
> +	kfree(parent_names);
> +	kfree(ad);
> +	return ret;
> +}
> +CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup);

- Alex

Re: [PATCHv10 15/41] CLK: TI: DRA7: Add APLL support

[Tero Kristo]

On 11/26/2013 10:51 AM, Alexander Aring wrote:
> Hi,
>
> On Tue, Nov 26, 2013 at 10:05:56AM +0200, Tero Kristo wrote:
>> From: J Keerthy <j-keerthy@ti.com>
>>
>> The patch adds support for DRA7 PCIe APLL. The APLL
>> sources the optional functional clocks for PCIe module.
>>
>> APLL stands for Analog PLL. This is different when comapred
>> with DPLL meaning Digital PLL, the phase detection is done
>> using an analog circuit.
>>
>> Signed-off-by: J Keerthy <j-keerthy@ti.com>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
>>   drivers/clk/ti/Makefile                            |    2 +-
>>   drivers/clk/ti/apll.c                              |  239 ++++++++++++++++++++
>>   3 files changed, 271 insertions(+), 1 deletion(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
>>   create mode 100644 drivers/clk/ti/apll.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
>> new file mode 100644
>> index 0000000..7faf5a6
> ...
>> +
>> +static int __init of_dra7_apll_setup(struct device_node *node)
>> +{
>> +	const struct clk_ops *ops;
>> +	struct clk *clk;
>> +	const char *clk_name = node->name;
>> +	int num_parents;
>> +	const char **parent_names = NULL;
>> +	u8 apll_flags = 0;
>> +	struct dpll_data *ad;
>> +	u32 idlest_mask = 0x1;
>> +	u32 autoidle_mask = 0x3;
>> +	int i;
>> +	int ret;
>> +
>> +	ops = &apll_ck_ops;
>> +	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
>> +	if (!ad)
>> +		return -ENOMEM;
>> +
>> +	of_property_read_string(node, "clock-output-names", &clk_name);
>> +
>> +	num_parents = of_clk_get_parent_count(node);
>> +	if (num_parents < 1) {
>> +		pr_err("dra7 apll %s must have parent(s)\n", node->name);
>> +		ret = -EINVAL;
>> +		goto cleanup;
>> +	}
>> +
>> +	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
>> +
>> +	for (i = 0; i < num_parents; i++)
>> +		parent_names[i] = of_clk_get_parent_name(node, i);
>> +
>> +	ad->clk_ref = of_clk_get(node, 0);
>> +	ad->clk_bypass = of_clk_get(node, 1);
>> +
>> +	if (IS_ERR(ad->clk_ref)) {
>> +		pr_debug("ti,clk-ref for %s not found\n", clk_name);
>> +		ret = -EAGAIN;
>> +		goto cleanup;
>> +	}
>> +
>> +	if (IS_ERR(ad->clk_bypass)) {
>> +		pr_debug("ti,clk-bypass for %s not found\n", clk_name);
>> +		ret = -EAGAIN;
>> +		goto cleanup;
>> +	}
>> +
>> +	ad->control_reg = ti_clk_get_reg_addr(node, 0);
>> +	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
>> +
>> +	if (!ad->control_reg || !ad->idlest_reg) {
>> +		ret = -EINVAL;
>> +		goto cleanup;
>> +	}
>> +
>> +	ad->idlest_mask = idlest_mask;
>> +	ad->enable_mask = autoidle_mask;
>> +
>> +	clk = omap_clk_register_apll(NULL, clk_name, parent_names,
>> +				num_parents, apll_flags, ad,
>> +				NULL, ops);
>> +
>> +	if (!IS_ERR(clk)) {
>> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
>> +		return 0;
>> +	}
>> +
>
> Should we not also here do a cleanup for allocated memory?
>
>> +	return PTR_ERR(clk);

Yes, this should be changed to be ret = PTR_ERR(clk);

-Tero

>> +
>> +cleanup:
>> +	kfree(parent_names);
>> +	kfree(ad);
>> +	return ret;
>> +}
>> +CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup);
>
> - Alex
>

[PATCHv10 15/41] CLK: TI: DRA7: Add APLL support

[Tero Kristo]

On 11/26/2013 10:51 AM, Alexander Aring wrote:
> Hi,
>
> On Tue, Nov 26, 2013 at 10:05:56AM +0200, Tero Kristo wrote:
>> From: J Keerthy <j-keerthy@ti.com>
>>
>> The patch adds support for DRA7 PCIe APLL. The APLL
>> sources the optional functional clocks for PCIe module.
>>
>> APLL stands for Analog PLL. This is different when comapred
>> with DPLL meaning Digital PLL, the phase detection is done
>> using an analog circuit.
>>
>> Signed-off-by: J Keerthy <j-keerthy@ti.com>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
>>   drivers/clk/ti/Makefile                            |    2 +-
>>   drivers/clk/ti/apll.c                              |  239 ++++++++++++++++++++
>>   3 files changed, 271 insertions(+), 1 deletion(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
>>   create mode 100644 drivers/clk/ti/apll.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
>> new file mode 100644
>> index 0000000..7faf5a6
> ...
>> +
>> +static int __init of_dra7_apll_setup(struct device_node *node)
>> +{
>> +	const struct clk_ops *ops;
>> +	struct clk *clk;
>> +	const char *clk_name = node->name;
>> +	int num_parents;
>> +	const char **parent_names = NULL;
>> +	u8 apll_flags = 0;
>> +	struct dpll_data *ad;
>> +	u32 idlest_mask = 0x1;
>> +	u32 autoidle_mask = 0x3;
>> +	int i;
>> +	int ret;
>> +
>> +	ops = &apll_ck_ops;
>> +	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
>> +	if (!ad)
>> +		return -ENOMEM;
>> +
>> +	of_property_read_string(node, "clock-output-names", &clk_name);
>> +
>> +	num_parents = of_clk_get_parent_count(node);
>> +	if (num_parents < 1) {
>> +		pr_err("dra7 apll %s must have parent(s)\n", node->name);
>> +		ret = -EINVAL;
>> +		goto cleanup;
>> +	}
>> +
>> +	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
>> +
>> +	for (i = 0; i < num_parents; i++)
>> +		parent_names[i] = of_clk_get_parent_name(node, i);
>> +
>> +	ad->clk_ref = of_clk_get(node, 0);
>> +	ad->clk_bypass = of_clk_get(node, 1);
>> +
>> +	if (IS_ERR(ad->clk_ref)) {
>> +		pr_debug("ti,clk-ref for %s not found\n", clk_name);
>> +		ret = -EAGAIN;
>> +		goto cleanup;
>> +	}
>> +
>> +	if (IS_ERR(ad->clk_bypass)) {
>> +		pr_debug("ti,clk-bypass for %s not found\n", clk_name);
>> +		ret = -EAGAIN;
>> +		goto cleanup;
>> +	}
>> +
>> +	ad->control_reg = ti_clk_get_reg_addr(node, 0);
>> +	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
>> +
>> +	if (!ad->control_reg || !ad->idlest_reg) {
>> +		ret = -EINVAL;
>> +		goto cleanup;
>> +	}
>> +
>> +	ad->idlest_mask = idlest_mask;
>> +	ad->enable_mask = autoidle_mask;
>> +
>> +	clk = omap_clk_register_apll(NULL, clk_name, parent_names,
>> +				num_parents, apll_flags, ad,
>> +				NULL, ops);
>> +
>> +	if (!IS_ERR(clk)) {
>> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
>> +		return 0;
>> +	}
>> +
>
> Should we not also here do a cleanup for allocated memory?
>
>> +	return PTR_ERR(clk);

Yes, this should be changed to be ret = PTR_ERR(clk);

-Tero

>> +
>> +cleanup:
>> +	kfree(parent_names);
>> +	kfree(ad);
>> +	return ret;
>> +}
>> +CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup);
>
> - Alex
>

Re: [PATCHv10 15/41] CLK: TI: DRA7: Add APLL support

[Alexander Aring]

Hi,

On Fri, Nov 29, 2013 at 09:00:29PM +0200, Tero Kristo wrote:
> On 11/26/2013 10:51 AM, Alexander Aring wrote:
> >Hi,
> >
> >On Tue, Nov 26, 2013 at 10:05:56AM +0200, Tero Kristo wrote:
> >>From: J Keerthy <j-keerthy@ti.com>
> >>
> >>The patch adds support for DRA7 PCIe APLL. The APLL
> >>sources the optional functional clocks for PCIe module.
> >>
> >>APLL stands for Analog PLL. This is different when comapred
> >>with DPLL meaning Digital PLL, the phase detection is done
> >>using an analog circuit.
> >>
> >>Signed-off-by: J Keerthy <j-keerthy@ti.com>
> >>Signed-off-by: Tero Kristo <t-kristo@ti.com>
> >>---
> >>  .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
> >>  drivers/clk/ti/Makefile                            |    2 +-
> >>  drivers/clk/ti/apll.c                              |  239 ++++++++++++++++++++
> >>  3 files changed, 271 insertions(+), 1 deletion(-)
> >>  create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
> >>  create mode 100644 drivers/clk/ti/apll.c
> >>
> >>diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
> >>new file mode 100644
> >>index 0000000..7faf5a6
> >...
> >>+
> >>+static int __init of_dra7_apll_setup(struct device_node *node)
> >>+{
> >>+	const struct clk_ops *ops;
> >>+	struct clk *clk;
> >>+	const char *clk_name = node->name;
> >>+	int num_parents;
> >>+	const char **parent_names = NULL;
> >>+	u8 apll_flags = 0;
> >>+	struct dpll_data *ad;
> >>+	u32 idlest_mask = 0x1;
> >>+	u32 autoidle_mask = 0x3;
> >>+	int i;
> >>+	int ret;
> >>+
> >>+	ops = &apll_ck_ops;
> >>+	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
> >>+	if (!ad)
> >>+		return -ENOMEM;
> >>+
> >>+	of_property_read_string(node, "clock-output-names", &clk_name);
> >>+
> >>+	num_parents = of_clk_get_parent_count(node);
> >>+	if (num_parents < 1) {
> >>+		pr_err("dra7 apll %s must have parent(s)\n", node->name);
> >>+		ret = -EINVAL;
> >>+		goto cleanup;
> >>+	}
> >>+
> >>+	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
> >>+
> >>+	for (i = 0; i < num_parents; i++)
> >>+		parent_names[i] = of_clk_get_parent_name(node, i);
> >>+
> >>+	ad->clk_ref = of_clk_get(node, 0);
> >>+	ad->clk_bypass = of_clk_get(node, 1);
> >>+
> >>+	if (IS_ERR(ad->clk_ref)) {
> >>+		pr_debug("ti,clk-ref for %s not found\n", clk_name);
> >>+		ret = -EAGAIN;
> >>+		goto cleanup;
> >>+	}
> >>+
> >>+	if (IS_ERR(ad->clk_bypass)) {
> >>+		pr_debug("ti,clk-bypass for %s not found\n", clk_name);
> >>+		ret = -EAGAIN;
> >>+		goto cleanup;
> >>+	}
> >>+
> >>+	ad->control_reg = ti_clk_get_reg_addr(node, 0);
> >>+	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
> >>+
> >>+	if (!ad->control_reg || !ad->idlest_reg) {
> >>+		ret = -EINVAL;
> >>+		goto cleanup;
> >>+	}
> >>+
> >>+	ad->idlest_mask = idlest_mask;
> >>+	ad->enable_mask = autoidle_mask;
> >>+
> >>+	clk = omap_clk_register_apll(NULL, clk_name, parent_names,
> >>+				num_parents, apll_flags, ad,
> >>+				NULL, ops);
> >>+
> >>+	if (!IS_ERR(clk)) {
> >>+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> >>+		return 0;
> >>+	}
> >>+
> >
> >Should we not also here do a cleanup for allocated memory?
> >
> >>+	return PTR_ERR(clk);
> 
> Yes, this should be changed to be ret = PTR_ERR(clk);
> 
ahh, ok. Just figure this out... I saw this on other patches in your
patchstack too sometimes. Please check this. :-)

- Alex

[PATCHv10 15/41] CLK: TI: DRA7: Add APLL support

[Alexander Aring]

Hi,

On Fri, Nov 29, 2013 at 09:00:29PM +0200, Tero Kristo wrote:
> On 11/26/2013 10:51 AM, Alexander Aring wrote:
> >Hi,
> >
> >On Tue, Nov 26, 2013 at 10:05:56AM +0200, Tero Kristo wrote:
> >>From: J Keerthy <j-keerthy@ti.com>
> >>
> >>The patch adds support for DRA7 PCIe APLL. The APLL
> >>sources the optional functional clocks for PCIe module.
> >>
> >>APLL stands for Analog PLL. This is different when comapred
> >>with DPLL meaning Digital PLL, the phase detection is done
> >>using an analog circuit.
> >>
> >>Signed-off-by: J Keerthy <j-keerthy@ti.com>
> >>Signed-off-by: Tero Kristo <t-kristo@ti.com>
> >>---
> >>  .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
> >>  drivers/clk/ti/Makefile                            |    2 +-
> >>  drivers/clk/ti/apll.c                              |  239 ++++++++++++++++++++
> >>  3 files changed, 271 insertions(+), 1 deletion(-)
> >>  create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
> >>  create mode 100644 drivers/clk/ti/apll.c
> >>
> >>diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
> >>new file mode 100644
> >>index 0000000..7faf5a6
> >...
> >>+
> >>+static int __init of_dra7_apll_setup(struct device_node *node)
> >>+{
> >>+	const struct clk_ops *ops;
> >>+	struct clk *clk;
> >>+	const char *clk_name = node->name;
> >>+	int num_parents;
> >>+	const char **parent_names = NULL;
> >>+	u8 apll_flags = 0;
> >>+	struct dpll_data *ad;
> >>+	u32 idlest_mask = 0x1;
> >>+	u32 autoidle_mask = 0x3;
> >>+	int i;
> >>+	int ret;
> >>+
> >>+	ops = &apll_ck_ops;
> >>+	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
> >>+	if (!ad)
> >>+		return -ENOMEM;
> >>+
> >>+	of_property_read_string(node, "clock-output-names", &clk_name);
> >>+
> >>+	num_parents = of_clk_get_parent_count(node);
> >>+	if (num_parents < 1) {
> >>+		pr_err("dra7 apll %s must have parent(s)\n", node->name);
> >>+		ret = -EINVAL;
> >>+		goto cleanup;
> >>+	}
> >>+
> >>+	parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
> >>+
> >>+	for (i = 0; i < num_parents; i++)
> >>+		parent_names[i] = of_clk_get_parent_name(node, i);
> >>+
> >>+	ad->clk_ref = of_clk_get(node, 0);
> >>+	ad->clk_bypass = of_clk_get(node, 1);
> >>+
> >>+	if (IS_ERR(ad->clk_ref)) {
> >>+		pr_debug("ti,clk-ref for %s not found\n", clk_name);
> >>+		ret = -EAGAIN;
> >>+		goto cleanup;
> >>+	}
> >>+
> >>+	if (IS_ERR(ad->clk_bypass)) {
> >>+		pr_debug("ti,clk-bypass for %s not found\n", clk_name);
> >>+		ret = -EAGAIN;
> >>+		goto cleanup;
> >>+	}
> >>+
> >>+	ad->control_reg = ti_clk_get_reg_addr(node, 0);
> >>+	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
> >>+
> >>+	if (!ad->control_reg || !ad->idlest_reg) {
> >>+		ret = -EINVAL;
> >>+		goto cleanup;
> >>+	}
> >>+
> >>+	ad->idlest_mask = idlest_mask;
> >>+	ad->enable_mask = autoidle_mask;
> >>+
> >>+	clk = omap_clk_register_apll(NULL, clk_name, parent_names,
> >>+				num_parents, apll_flags, ad,
> >>+				NULL, ops);
> >>+
> >>+	if (!IS_ERR(clk)) {
> >>+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> >>+		return 0;
> >>+	}
> >>+
> >
> >Should we not also here do a cleanup for allocated memory?
> >
> >>+	return PTR_ERR(clk);
> 
> Yes, this should be changed to be ret = PTR_ERR(clk);
> 
ahh, ok. Just figure this out... I saw this on other patches in your
patchstack too sometimes. Please check this. :-)

- Alex

[PATCHv10 16/41] CLK: TI: add dra7 clock init file

[Tero Kristo]

clk-7xx.c now contains the clock init functionality for dra7, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/Makefile  |    1 +
 drivers/clk/ti/clk-7xx.c |  332 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h   |    1 +
 3 files changed, 334 insertions(+)
 create mode 100644 drivers/clk/ti/clk-7xx.c

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 3d71e1e..f8ae4b5 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -4,4 +4,5 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
+obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
 endif
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
new file mode 100644
index 0000000..9977653
--- /dev/null
+++ b/drivers/clk/ti/clk-7xx.c
@@ -0,0 +1,332 @@
+/*
+ * DRA7 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#define DRA7_DPLL_ABE_DEFFREQ				361267200
+#define DRA7_DPLL_GMAC_DEFFREQ				1000000000
+
+
+static struct ti_dt_clk dra7xx_clks[] = {
+	DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
+	DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
+	DT_CLK(NULL, "atl_clkin2_ck", "atl_clkin2_ck"),
+	DT_CLK(NULL, "atlclkin3_ck", "atlclkin3_ck"),
+	DT_CLK(NULL, "hdmi_clkin_ck", "hdmi_clkin_ck"),
+	DT_CLK(NULL, "mlb_clkin_ck", "mlb_clkin_ck"),
+	DT_CLK(NULL, "mlbp_clkin_ck", "mlbp_clkin_ck"),
+	DT_CLK(NULL, "pciesref_acs_clk_ck", "pciesref_acs_clk_ck"),
+	DT_CLK(NULL, "ref_clkin0_ck", "ref_clkin0_ck"),
+	DT_CLK(NULL, "ref_clkin1_ck", "ref_clkin1_ck"),
+	DT_CLK(NULL, "ref_clkin2_ck", "ref_clkin2_ck"),
+	DT_CLK(NULL, "ref_clkin3_ck", "ref_clkin3_ck"),
+	DT_CLK(NULL, "rmii_clk_ck", "rmii_clk_ck"),
+	DT_CLK(NULL, "sdvenc_clkin_ck", "sdvenc_clkin_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_20000000_ck", "virt_20000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin1", "sys_clkin1"),
+	DT_CLK(NULL, "sys_clkin2", "sys_clkin2"),
+	DT_CLK(NULL, "usb_otg_clkin_ck", "usb_otg_clkin_ck"),
+	DT_CLK(NULL, "video1_clkin_ck", "video1_clkin_ck"),
+	DT_CLK(NULL, "video1_m2_clkin_ck", "video1_m2_clkin_ck"),
+	DT_CLK(NULL, "video2_clkin_ck", "video2_clkin_ck"),
+	DT_CLK(NULL, "video2_m2_clkin_ck", "video2_m2_clkin_ck"),
+	DT_CLK(NULL, "abe_dpll_sys_clk_mux", "abe_dpll_sys_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux", "abe_dpll_bypass_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_clk_mux", "abe_dpll_clk_mux"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "abe_giclk_div", "abe_giclk_div"),
+	DT_CLK(NULL, "abe_lp_clk_div", "abe_lp_clk_div"),
+	DT_CLK(NULL, "abe_sys_clk_div", "abe_sys_clk_div"),
+	DT_CLK(NULL, "adc_gfclk_mux", "adc_gfclk_mux"),
+	DT_CLK(NULL, "dpll_pcie_ref_ck", "dpll_pcie_ref_ck"),
+	DT_CLK(NULL, "dpll_pcie_ref_m2ldo_ck", "dpll_pcie_ref_m2ldo_ck"),
+	DT_CLK(NULL, "apll_pcie_ck", "apll_pcie_ck"),
+	DT_CLK(NULL, "apll_pcie_clkvcoldo", "apll_pcie_clkvcoldo"),
+	DT_CLK(NULL, "apll_pcie_clkvcoldo_div", "apll_pcie_clkvcoldo_div"),
+	DT_CLK(NULL, "apll_pcie_m2_ck", "apll_pcie_m2_ck"),
+	DT_CLK(NULL, "sys_clk1_dclk_div", "sys_clk1_dclk_div"),
+	DT_CLK(NULL, "sys_clk2_dclk_div", "sys_clk2_dclk_div"),
+	DT_CLK(NULL, "dpll_abe_m2_ck", "dpll_abe_m2_ck"),
+	DT_CLK(NULL, "per_abe_x1_dclk_div", "per_abe_x1_dclk_div"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_h12x2_ck", "dpll_core_h12x2_ck"),
+	DT_CLK(NULL, "mpu_dpll_hs_clk_div", "mpu_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "mpu_dclk_div", "mpu_dclk_div"),
+	DT_CLK(NULL, "dsp_dpll_hs_clk_div", "dsp_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_dsp_ck", "dpll_dsp_ck"),
+	DT_CLK(NULL, "dpll_dsp_m2_ck", "dpll_dsp_m2_ck"),
+	DT_CLK(NULL, "dsp_gclk_div", "dsp_gclk_div"),
+	DT_CLK(NULL, "iva_dpll_hs_clk_div", "iva_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_m2_ck", "dpll_iva_m2_ck"),
+	DT_CLK(NULL, "iva_dclk", "iva_dclk"),
+	DT_CLK(NULL, "dpll_gpu_ck", "dpll_gpu_ck"),
+	DT_CLK(NULL, "dpll_gpu_m2_ck", "dpll_gpu_m2_ck"),
+	DT_CLK(NULL, "gpu_dclk", "gpu_dclk"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "core_dpll_out_dclk_div", "core_dpll_out_dclk_div"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "emif_phy_dclk_div", "emif_phy_dclk_div"),
+	DT_CLK(NULL, "dpll_gmac_ck", "dpll_gmac_ck"),
+	DT_CLK(NULL, "dpll_gmac_m2_ck", "dpll_gmac_m2_ck"),
+	DT_CLK(NULL, "gmac_250m_dclk_div", "gmac_250m_dclk_div"),
+	DT_CLK(NULL, "video2_dclk_div", "video2_dclk_div"),
+	DT_CLK(NULL, "video1_dclk_div", "video1_dclk_div"),
+	DT_CLK(NULL, "hdmi_dclk_div", "hdmi_dclk_div"),
+	DT_CLK(NULL, "per_dpll_hs_clk_div", "per_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "func_96m_aon_dclk_div", "func_96m_aon_dclk_div"),
+	DT_CLK(NULL, "usb_dpll_hs_clk_div", "usb_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "l3init_480m_dclk_div", "l3init_480m_dclk_div"),
+	DT_CLK(NULL, "usb_otg_dclk_div", "usb_otg_dclk_div"),
+	DT_CLK(NULL, "sata_dclk_div", "sata_dclk_div"),
+	DT_CLK(NULL, "dpll_pcie_ref_m2_ck", "dpll_pcie_ref_m2_ck"),
+	DT_CLK(NULL, "pcie2_dclk_div", "pcie2_dclk_div"),
+	DT_CLK(NULL, "pcie_dclk_div", "pcie_dclk_div"),
+	DT_CLK(NULL, "emu_dclk_div", "emu_dclk_div"),
+	DT_CLK(NULL, "secure_32k_dclk_div", "secure_32k_dclk_div"),
+	DT_CLK(NULL, "eve_dpll_hs_clk_div", "eve_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_eve_ck", "dpll_eve_ck"),
+	DT_CLK(NULL, "dpll_eve_m2_ck", "dpll_eve_m2_ck"),
+	DT_CLK(NULL, "eve_dclk_div", "eve_dclk_div"),
+	DT_CLK(NULL, "clkoutmux0_clk_mux", "clkoutmux0_clk_mux"),
+	DT_CLK(NULL, "clkoutmux1_clk_mux", "clkoutmux1_clk_mux"),
+	DT_CLK(NULL, "clkoutmux2_clk_mux", "clkoutmux2_clk_mux"),
+	DT_CLK(NULL, "custefuse_sys_gfclk_div", "custefuse_sys_gfclk_div"),
+	DT_CLK(NULL, "dpll_core_h13x2_ck", "dpll_core_h13x2_ck"),
+	DT_CLK(NULL, "dpll_core_h14x2_ck", "dpll_core_h14x2_ck"),
+	DT_CLK(NULL, "dpll_core_h22x2_ck", "dpll_core_h22x2_ck"),
+	DT_CLK(NULL, "dpll_core_h23x2_ck", "dpll_core_h23x2_ck"),
+	DT_CLK(NULL, "dpll_core_h24x2_ck", "dpll_core_h24x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_x2_ck", "dpll_ddr_x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_h11x2_ck", "dpll_ddr_h11x2_ck"),
+	DT_CLK(NULL, "dpll_dsp_x2_ck", "dpll_dsp_x2_ck"),
+	DT_CLK(NULL, "dpll_dsp_m3x2_ck", "dpll_dsp_m3x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_x2_ck", "dpll_gmac_x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h11x2_ck", "dpll_gmac_h11x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h12x2_ck", "dpll_gmac_h12x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h13x2_ck", "dpll_gmac_h13x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_m3x2_ck", "dpll_gmac_m3x2_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_h11x2_ck", "dpll_per_h11x2_ck"),
+	DT_CLK(NULL, "dpll_per_h12x2_ck", "dpll_per_h12x2_ck"),
+	DT_CLK(NULL, "dpll_per_h13x2_ck", "dpll_per_h13x2_ck"),
+	DT_CLK(NULL, "dpll_per_h14x2_ck", "dpll_per_h14x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo", "dpll_usb_clkdcoldo"),
+	DT_CLK(NULL, "eve_clk", "eve_clk"),
+	DT_CLK(NULL, "func_128m_clk", "func_128m_clk"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "gmii_m_clk_div", "gmii_m_clk_div"),
+	DT_CLK(NULL, "hdmi_clk2_div", "hdmi_clk2_div"),
+	DT_CLK(NULL, "hdmi_div_clk", "hdmi_div_clk"),
+	DT_CLK(NULL, "hdmi_dpll_clk_mux", "hdmi_dpll_clk_mux"),
+	DT_CLK(NULL, "l3_iclk_div", "l3_iclk_div"),
+	DT_CLK(NULL, "l3init_60m_fclk", "l3init_60m_fclk"),
+	DT_CLK(NULL, "l4_root_clk_div", "l4_root_clk_div"),
+	DT_CLK(NULL, "mlb_clk", "mlb_clk"),
+	DT_CLK(NULL, "mlbp_clk", "mlbp_clk"),
+	DT_CLK(NULL, "per_abe_x1_gfclk2_div", "per_abe_x1_gfclk2_div"),
+	DT_CLK(NULL, "timer_sys_clk_div", "timer_sys_clk_div"),
+	DT_CLK(NULL, "video1_clk2_div", "video1_clk2_div"),
+	DT_CLK(NULL, "video1_div_clk", "video1_div_clk"),
+	DT_CLK(NULL, "video1_dpll_clk_mux", "video1_dpll_clk_mux"),
+	DT_CLK(NULL, "video2_clk2_div", "video2_clk2_div"),
+	DT_CLK(NULL, "video2_div_clk", "video2_div_clk"),
+	DT_CLK(NULL, "video2_dpll_clk_mux", "video2_dpll_clk_mux"),
+	DT_CLK(NULL, "wkupaon_iclk_mux", "wkupaon_iclk_mux"),
+	DT_CLK(NULL, "dss_32khz_clk", "dss_32khz_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_hdmi_clk", "dss_hdmi_clk"),
+	DT_CLK(NULL, "dss_video1_clk", "dss_video1_clk"),
+	DT_CLK(NULL, "dss_video2_clk", "dss_video2_clk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "gpio7_dbclk", "gpio7_dbclk"),
+	DT_CLK(NULL, "gpio8_dbclk", "gpio8_dbclk"),
+	DT_CLK(NULL, "mmc1_clk32k", "mmc1_clk32k"),
+	DT_CLK(NULL, "mmc2_clk32k", "mmc2_clk32k"),
+	DT_CLK(NULL, "mmc3_clk32k", "mmc3_clk32k"),
+	DT_CLK(NULL, "mmc4_clk32k", "mmc4_clk32k"),
+	DT_CLK(NULL, "sata_ref_clk", "sata_ref_clk"),
+	DT_CLK(NULL, "usb_otg_ss1_refclk960m", "usb_otg_ss1_refclk960m"),
+	DT_CLK(NULL, "usb_otg_ss2_refclk960m", "usb_otg_ss2_refclk960m"),
+	DT_CLK(NULL, "usb_phy1_always_on_clk32k", "usb_phy1_always_on_clk32k"),
+	DT_CLK(NULL, "usb_phy2_always_on_clk32k", "usb_phy2_always_on_clk32k"),
+	DT_CLK(NULL, "usb_phy3_always_on_clk32k", "usb_phy3_always_on_clk32k"),
+	DT_CLK(NULL, "atl_dpll_clk_mux", "atl_dpll_clk_mux"),
+	DT_CLK(NULL, "atl_gfclk_mux", "atl_gfclk_mux"),
+	DT_CLK(NULL, "dcan1_sys_clk_mux", "dcan1_sys_clk_mux"),
+	DT_CLK(NULL, "gmac_gmii_ref_clk_div", "gmac_gmii_ref_clk_div"),
+	DT_CLK(NULL, "gmac_rft_clk_mux", "gmac_rft_clk_mux"),
+	DT_CLK(NULL, "gpu_core_gclk_mux", "gpu_core_gclk_mux"),
+	DT_CLK(NULL, "gpu_hyd_gclk_mux", "gpu_hyd_gclk_mux"),
+	DT_CLK(NULL, "ipu1_gfclk_mux", "ipu1_gfclk_mux"),
+	DT_CLK(NULL, "l3instr_ts_gclk_div", "l3instr_ts_gclk_div"),
+	DT_CLK(NULL, "mcasp1_ahclkr_mux", "mcasp1_ahclkr_mux"),
+	DT_CLK(NULL, "mcasp1_ahclkx_mux", "mcasp1_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp1_aux_gfclk_mux", "mcasp1_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp2_ahclkr_mux", "mcasp2_ahclkr_mux"),
+	DT_CLK(NULL, "mcasp2_ahclkx_mux", "mcasp2_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp2_aux_gfclk_mux", "mcasp2_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp3_ahclkx_mux", "mcasp3_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp3_aux_gfclk_mux", "mcasp3_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp4_ahclkx_mux", "mcasp4_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp4_aux_gfclk_mux", "mcasp4_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp5_ahclkx_mux", "mcasp5_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp5_aux_gfclk_mux", "mcasp5_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp6_ahclkx_mux", "mcasp6_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "mcasp6_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp7_ahclkx_mux", "mcasp7_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "mcasp7_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp8_ahclk_mux", "mcasp8_ahclk_mux"),
+	DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "mcasp8_aux_gfclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk_mux", "mmc1_fclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk_div", "mmc1_fclk_div"),
+	DT_CLK(NULL, "mmc2_fclk_mux", "mmc2_fclk_mux"),
+	DT_CLK(NULL, "mmc2_fclk_div", "mmc2_fclk_div"),
+	DT_CLK(NULL, "mmc3_gfclk_mux", "mmc3_gfclk_mux"),
+	DT_CLK(NULL, "mmc3_gfclk_div", "mmc3_gfclk_div"),
+	DT_CLK(NULL, "mmc4_gfclk_mux", "mmc4_gfclk_mux"),
+	DT_CLK(NULL, "mmc4_gfclk_div", "mmc4_gfclk_div"),
+	DT_CLK(NULL, "qspi_gfclk_mux", "qspi_gfclk_mux"),
+	DT_CLK(NULL, "qspi_gfclk_div", "qspi_gfclk_div"),
+	DT_CLK(NULL, "timer10_gfclk_mux", "timer10_gfclk_mux"),
+	DT_CLK(NULL, "timer11_gfclk_mux", "timer11_gfclk_mux"),
+	DT_CLK(NULL, "timer13_gfclk_mux", "timer13_gfclk_mux"),
+	DT_CLK(NULL, "timer14_gfclk_mux", "timer14_gfclk_mux"),
+	DT_CLK(NULL, "timer15_gfclk_mux", "timer15_gfclk_mux"),
+	DT_CLK(NULL, "timer16_gfclk_mux", "timer16_gfclk_mux"),
+	DT_CLK(NULL, "timer1_gfclk_mux", "timer1_gfclk_mux"),
+	DT_CLK(NULL, "timer2_gfclk_mux", "timer2_gfclk_mux"),
+	DT_CLK(NULL, "timer3_gfclk_mux", "timer3_gfclk_mux"),
+	DT_CLK(NULL, "timer4_gfclk_mux", "timer4_gfclk_mux"),
+	DT_CLK(NULL, "timer5_gfclk_mux", "timer5_gfclk_mux"),
+	DT_CLK(NULL, "timer6_gfclk_mux", "timer6_gfclk_mux"),
+	DT_CLK(NULL, "timer7_gfclk_mux", "timer7_gfclk_mux"),
+	DT_CLK(NULL, "timer8_gfclk_mux", "timer8_gfclk_mux"),
+	DT_CLK(NULL, "timer9_gfclk_mux", "timer9_gfclk_mux"),
+	DT_CLK(NULL, "uart10_gfclk_mux", "uart10_gfclk_mux"),
+	DT_CLK(NULL, "uart1_gfclk_mux", "uart1_gfclk_mux"),
+	DT_CLK(NULL, "uart2_gfclk_mux", "uart2_gfclk_mux"),
+	DT_CLK(NULL, "uart3_gfclk_mux", "uart3_gfclk_mux"),
+	DT_CLK(NULL, "uart4_gfclk_mux", "uart4_gfclk_mux"),
+	DT_CLK(NULL, "uart5_gfclk_mux", "uart5_gfclk_mux"),
+	DT_CLK(NULL, "uart6_gfclk_mux", "uart6_gfclk_mux"),
+	DT_CLK(NULL, "uart7_gfclk_mux", "uart7_gfclk_mux"),
+	DT_CLK(NULL, "uart8_gfclk_mux", "uart8_gfclk_mux"),
+	DT_CLK(NULL, "uart9_gfclk_mux", "uart9_gfclk_mux"),
+	DT_CLK(NULL, "vip1_gclk_mux", "vip1_gclk_mux"),
+	DT_CLK(NULL, "vip2_gclk_mux", "vip2_gclk_mux"),
+	DT_CLK(NULL, "vip3_gclk_mux", "vip3_gclk_mux"),
+	DT_CLK(NULL, "gpmc_ck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("4ae18000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48032000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48034000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48036000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("4803e000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48086000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48088000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48820000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48822000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48824000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48826000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
+	{ .node_name = NULL },
+};
+
+int __init dra7xx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck;
+
+	ti_dt_clocks_register(dra7xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	abe_dpll_mux = clk_get_sys(NULL, "abe_dpll_sys_clk_mux");
+	sys_clkin2 = clk_get_sys(NULL, "sys_clkin2");
+	dpll_ck = clk_get_sys(NULL, "dpll_abe_ck");
+
+	rc = clk_set_parent(abe_dpll_mux, sys_clkin2);
+	if (!rc)
+		rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	dpll_ck = clk_get_sys(NULL, "dpll_gmac_ck");
+	rc = clk_set_rate(dpll_ck, DRA7_DPLL_GMAC_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure GMAC DPLL!\n", __func__);
+
+	return rc;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 50c532c..671c8af 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -241,6 +241,7 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
+int dra7xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 16/41] CLK: TI: add dra7 clock init file

[Tero Kristo]

clk-7xx.c now contains the clock init functionality for dra7, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/Makefile  |    1 +
 drivers/clk/ti/clk-7xx.c |  332 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h   |    1 +
 3 files changed, 334 insertions(+)
 create mode 100644 drivers/clk/ti/clk-7xx.c

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 3d71e1e..f8ae4b5 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -4,4 +4,5 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
+obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
 endif
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
new file mode 100644
index 0000000..9977653
--- /dev/null
+++ b/drivers/clk/ti/clk-7xx.c
@@ -0,0 +1,332 @@
+/*
+ * DRA7 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo (t-kristo at ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#define DRA7_DPLL_ABE_DEFFREQ				361267200
+#define DRA7_DPLL_GMAC_DEFFREQ				1000000000
+
+
+static struct ti_dt_clk dra7xx_clks[] = {
+	DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
+	DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
+	DT_CLK(NULL, "atl_clkin2_ck", "atl_clkin2_ck"),
+	DT_CLK(NULL, "atlclkin3_ck", "atlclkin3_ck"),
+	DT_CLK(NULL, "hdmi_clkin_ck", "hdmi_clkin_ck"),
+	DT_CLK(NULL, "mlb_clkin_ck", "mlb_clkin_ck"),
+	DT_CLK(NULL, "mlbp_clkin_ck", "mlbp_clkin_ck"),
+	DT_CLK(NULL, "pciesref_acs_clk_ck", "pciesref_acs_clk_ck"),
+	DT_CLK(NULL, "ref_clkin0_ck", "ref_clkin0_ck"),
+	DT_CLK(NULL, "ref_clkin1_ck", "ref_clkin1_ck"),
+	DT_CLK(NULL, "ref_clkin2_ck", "ref_clkin2_ck"),
+	DT_CLK(NULL, "ref_clkin3_ck", "ref_clkin3_ck"),
+	DT_CLK(NULL, "rmii_clk_ck", "rmii_clk_ck"),
+	DT_CLK(NULL, "sdvenc_clkin_ck", "sdvenc_clkin_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_20000000_ck", "virt_20000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin1", "sys_clkin1"),
+	DT_CLK(NULL, "sys_clkin2", "sys_clkin2"),
+	DT_CLK(NULL, "usb_otg_clkin_ck", "usb_otg_clkin_ck"),
+	DT_CLK(NULL, "video1_clkin_ck", "video1_clkin_ck"),
+	DT_CLK(NULL, "video1_m2_clkin_ck", "video1_m2_clkin_ck"),
+	DT_CLK(NULL, "video2_clkin_ck", "video2_clkin_ck"),
+	DT_CLK(NULL, "video2_m2_clkin_ck", "video2_m2_clkin_ck"),
+	DT_CLK(NULL, "abe_dpll_sys_clk_mux", "abe_dpll_sys_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux", "abe_dpll_bypass_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_clk_mux", "abe_dpll_clk_mux"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "abe_giclk_div", "abe_giclk_div"),
+	DT_CLK(NULL, "abe_lp_clk_div", "abe_lp_clk_div"),
+	DT_CLK(NULL, "abe_sys_clk_div", "abe_sys_clk_div"),
+	DT_CLK(NULL, "adc_gfclk_mux", "adc_gfclk_mux"),
+	DT_CLK(NULL, "dpll_pcie_ref_ck", "dpll_pcie_ref_ck"),
+	DT_CLK(NULL, "dpll_pcie_ref_m2ldo_ck", "dpll_pcie_ref_m2ldo_ck"),
+	DT_CLK(NULL, "apll_pcie_ck", "apll_pcie_ck"),
+	DT_CLK(NULL, "apll_pcie_clkvcoldo", "apll_pcie_clkvcoldo"),
+	DT_CLK(NULL, "apll_pcie_clkvcoldo_div", "apll_pcie_clkvcoldo_div"),
+	DT_CLK(NULL, "apll_pcie_m2_ck", "apll_pcie_m2_ck"),
+	DT_CLK(NULL, "sys_clk1_dclk_div", "sys_clk1_dclk_div"),
+	DT_CLK(NULL, "sys_clk2_dclk_div", "sys_clk2_dclk_div"),
+	DT_CLK(NULL, "dpll_abe_m2_ck", "dpll_abe_m2_ck"),
+	DT_CLK(NULL, "per_abe_x1_dclk_div", "per_abe_x1_dclk_div"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_h12x2_ck", "dpll_core_h12x2_ck"),
+	DT_CLK(NULL, "mpu_dpll_hs_clk_div", "mpu_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "mpu_dclk_div", "mpu_dclk_div"),
+	DT_CLK(NULL, "dsp_dpll_hs_clk_div", "dsp_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_dsp_ck", "dpll_dsp_ck"),
+	DT_CLK(NULL, "dpll_dsp_m2_ck", "dpll_dsp_m2_ck"),
+	DT_CLK(NULL, "dsp_gclk_div", "dsp_gclk_div"),
+	DT_CLK(NULL, "iva_dpll_hs_clk_div", "iva_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_m2_ck", "dpll_iva_m2_ck"),
+	DT_CLK(NULL, "iva_dclk", "iva_dclk"),
+	DT_CLK(NULL, "dpll_gpu_ck", "dpll_gpu_ck"),
+	DT_CLK(NULL, "dpll_gpu_m2_ck", "dpll_gpu_m2_ck"),
+	DT_CLK(NULL, "gpu_dclk", "gpu_dclk"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "core_dpll_out_dclk_div", "core_dpll_out_dclk_div"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "emif_phy_dclk_div", "emif_phy_dclk_div"),
+	DT_CLK(NULL, "dpll_gmac_ck", "dpll_gmac_ck"),
+	DT_CLK(NULL, "dpll_gmac_m2_ck", "dpll_gmac_m2_ck"),
+	DT_CLK(NULL, "gmac_250m_dclk_div", "gmac_250m_dclk_div"),
+	DT_CLK(NULL, "video2_dclk_div", "video2_dclk_div"),
+	DT_CLK(NULL, "video1_dclk_div", "video1_dclk_div"),
+	DT_CLK(NULL, "hdmi_dclk_div", "hdmi_dclk_div"),
+	DT_CLK(NULL, "per_dpll_hs_clk_div", "per_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "func_96m_aon_dclk_div", "func_96m_aon_dclk_div"),
+	DT_CLK(NULL, "usb_dpll_hs_clk_div", "usb_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "l3init_480m_dclk_div", "l3init_480m_dclk_div"),
+	DT_CLK(NULL, "usb_otg_dclk_div", "usb_otg_dclk_div"),
+	DT_CLK(NULL, "sata_dclk_div", "sata_dclk_div"),
+	DT_CLK(NULL, "dpll_pcie_ref_m2_ck", "dpll_pcie_ref_m2_ck"),
+	DT_CLK(NULL, "pcie2_dclk_div", "pcie2_dclk_div"),
+	DT_CLK(NULL, "pcie_dclk_div", "pcie_dclk_div"),
+	DT_CLK(NULL, "emu_dclk_div", "emu_dclk_div"),
+	DT_CLK(NULL, "secure_32k_dclk_div", "secure_32k_dclk_div"),
+	DT_CLK(NULL, "eve_dpll_hs_clk_div", "eve_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_eve_ck", "dpll_eve_ck"),
+	DT_CLK(NULL, "dpll_eve_m2_ck", "dpll_eve_m2_ck"),
+	DT_CLK(NULL, "eve_dclk_div", "eve_dclk_div"),
+	DT_CLK(NULL, "clkoutmux0_clk_mux", "clkoutmux0_clk_mux"),
+	DT_CLK(NULL, "clkoutmux1_clk_mux", "clkoutmux1_clk_mux"),
+	DT_CLK(NULL, "clkoutmux2_clk_mux", "clkoutmux2_clk_mux"),
+	DT_CLK(NULL, "custefuse_sys_gfclk_div", "custefuse_sys_gfclk_div"),
+	DT_CLK(NULL, "dpll_core_h13x2_ck", "dpll_core_h13x2_ck"),
+	DT_CLK(NULL, "dpll_core_h14x2_ck", "dpll_core_h14x2_ck"),
+	DT_CLK(NULL, "dpll_core_h22x2_ck", "dpll_core_h22x2_ck"),
+	DT_CLK(NULL, "dpll_core_h23x2_ck", "dpll_core_h23x2_ck"),
+	DT_CLK(NULL, "dpll_core_h24x2_ck", "dpll_core_h24x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_x2_ck", "dpll_ddr_x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_h11x2_ck", "dpll_ddr_h11x2_ck"),
+	DT_CLK(NULL, "dpll_dsp_x2_ck", "dpll_dsp_x2_ck"),
+	DT_CLK(NULL, "dpll_dsp_m3x2_ck", "dpll_dsp_m3x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_x2_ck", "dpll_gmac_x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h11x2_ck", "dpll_gmac_h11x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h12x2_ck", "dpll_gmac_h12x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h13x2_ck", "dpll_gmac_h13x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_m3x2_ck", "dpll_gmac_m3x2_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_h11x2_ck", "dpll_per_h11x2_ck"),
+	DT_CLK(NULL, "dpll_per_h12x2_ck", "dpll_per_h12x2_ck"),
+	DT_CLK(NULL, "dpll_per_h13x2_ck", "dpll_per_h13x2_ck"),
+	DT_CLK(NULL, "dpll_per_h14x2_ck", "dpll_per_h14x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo", "dpll_usb_clkdcoldo"),
+	DT_CLK(NULL, "eve_clk", "eve_clk"),
+	DT_CLK(NULL, "func_128m_clk", "func_128m_clk"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "gmii_m_clk_div", "gmii_m_clk_div"),
+	DT_CLK(NULL, "hdmi_clk2_div", "hdmi_clk2_div"),
+	DT_CLK(NULL, "hdmi_div_clk", "hdmi_div_clk"),
+	DT_CLK(NULL, "hdmi_dpll_clk_mux", "hdmi_dpll_clk_mux"),
+	DT_CLK(NULL, "l3_iclk_div", "l3_iclk_div"),
+	DT_CLK(NULL, "l3init_60m_fclk", "l3init_60m_fclk"),
+	DT_CLK(NULL, "l4_root_clk_div", "l4_root_clk_div"),
+	DT_CLK(NULL, "mlb_clk", "mlb_clk"),
+	DT_CLK(NULL, "mlbp_clk", "mlbp_clk"),
+	DT_CLK(NULL, "per_abe_x1_gfclk2_div", "per_abe_x1_gfclk2_div"),
+	DT_CLK(NULL, "timer_sys_clk_div", "timer_sys_clk_div"),
+	DT_CLK(NULL, "video1_clk2_div", "video1_clk2_div"),
+	DT_CLK(NULL, "video1_div_clk", "video1_div_clk"),
+	DT_CLK(NULL, "video1_dpll_clk_mux", "video1_dpll_clk_mux"),
+	DT_CLK(NULL, "video2_clk2_div", "video2_clk2_div"),
+	DT_CLK(NULL, "video2_div_clk", "video2_div_clk"),
+	DT_CLK(NULL, "video2_dpll_clk_mux", "video2_dpll_clk_mux"),
+	DT_CLK(NULL, "wkupaon_iclk_mux", "wkupaon_iclk_mux"),
+	DT_CLK(NULL, "dss_32khz_clk", "dss_32khz_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_hdmi_clk", "dss_hdmi_clk"),
+	DT_CLK(NULL, "dss_video1_clk", "dss_video1_clk"),
+	DT_CLK(NULL, "dss_video2_clk", "dss_video2_clk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "gpio7_dbclk", "gpio7_dbclk"),
+	DT_CLK(NULL, "gpio8_dbclk", "gpio8_dbclk"),
+	DT_CLK(NULL, "mmc1_clk32k", "mmc1_clk32k"),
+	DT_CLK(NULL, "mmc2_clk32k", "mmc2_clk32k"),
+	DT_CLK(NULL, "mmc3_clk32k", "mmc3_clk32k"),
+	DT_CLK(NULL, "mmc4_clk32k", "mmc4_clk32k"),
+	DT_CLK(NULL, "sata_ref_clk", "sata_ref_clk"),
+	DT_CLK(NULL, "usb_otg_ss1_refclk960m", "usb_otg_ss1_refclk960m"),
+	DT_CLK(NULL, "usb_otg_ss2_refclk960m", "usb_otg_ss2_refclk960m"),
+	DT_CLK(NULL, "usb_phy1_always_on_clk32k", "usb_phy1_always_on_clk32k"),
+	DT_CLK(NULL, "usb_phy2_always_on_clk32k", "usb_phy2_always_on_clk32k"),
+	DT_CLK(NULL, "usb_phy3_always_on_clk32k", "usb_phy3_always_on_clk32k"),
+	DT_CLK(NULL, "atl_dpll_clk_mux", "atl_dpll_clk_mux"),
+	DT_CLK(NULL, "atl_gfclk_mux", "atl_gfclk_mux"),
+	DT_CLK(NULL, "dcan1_sys_clk_mux", "dcan1_sys_clk_mux"),
+	DT_CLK(NULL, "gmac_gmii_ref_clk_div", "gmac_gmii_ref_clk_div"),
+	DT_CLK(NULL, "gmac_rft_clk_mux", "gmac_rft_clk_mux"),
+	DT_CLK(NULL, "gpu_core_gclk_mux", "gpu_core_gclk_mux"),
+	DT_CLK(NULL, "gpu_hyd_gclk_mux", "gpu_hyd_gclk_mux"),
+	DT_CLK(NULL, "ipu1_gfclk_mux", "ipu1_gfclk_mux"),
+	DT_CLK(NULL, "l3instr_ts_gclk_div", "l3instr_ts_gclk_div"),
+	DT_CLK(NULL, "mcasp1_ahclkr_mux", "mcasp1_ahclkr_mux"),
+	DT_CLK(NULL, "mcasp1_ahclkx_mux", "mcasp1_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp1_aux_gfclk_mux", "mcasp1_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp2_ahclkr_mux", "mcasp2_ahclkr_mux"),
+	DT_CLK(NULL, "mcasp2_ahclkx_mux", "mcasp2_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp2_aux_gfclk_mux", "mcasp2_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp3_ahclkx_mux", "mcasp3_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp3_aux_gfclk_mux", "mcasp3_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp4_ahclkx_mux", "mcasp4_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp4_aux_gfclk_mux", "mcasp4_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp5_ahclkx_mux", "mcasp5_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp5_aux_gfclk_mux", "mcasp5_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp6_ahclkx_mux", "mcasp6_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "mcasp6_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp7_ahclkx_mux", "mcasp7_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "mcasp7_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp8_ahclk_mux", "mcasp8_ahclk_mux"),
+	DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "mcasp8_aux_gfclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk_mux", "mmc1_fclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk_div", "mmc1_fclk_div"),
+	DT_CLK(NULL, "mmc2_fclk_mux", "mmc2_fclk_mux"),
+	DT_CLK(NULL, "mmc2_fclk_div", "mmc2_fclk_div"),
+	DT_CLK(NULL, "mmc3_gfclk_mux", "mmc3_gfclk_mux"),
+	DT_CLK(NULL, "mmc3_gfclk_div", "mmc3_gfclk_div"),
+	DT_CLK(NULL, "mmc4_gfclk_mux", "mmc4_gfclk_mux"),
+	DT_CLK(NULL, "mmc4_gfclk_div", "mmc4_gfclk_div"),
+	DT_CLK(NULL, "qspi_gfclk_mux", "qspi_gfclk_mux"),
+	DT_CLK(NULL, "qspi_gfclk_div", "qspi_gfclk_div"),
+	DT_CLK(NULL, "timer10_gfclk_mux", "timer10_gfclk_mux"),
+	DT_CLK(NULL, "timer11_gfclk_mux", "timer11_gfclk_mux"),
+	DT_CLK(NULL, "timer13_gfclk_mux", "timer13_gfclk_mux"),
+	DT_CLK(NULL, "timer14_gfclk_mux", "timer14_gfclk_mux"),
+	DT_CLK(NULL, "timer15_gfclk_mux", "timer15_gfclk_mux"),
+	DT_CLK(NULL, "timer16_gfclk_mux", "timer16_gfclk_mux"),
+	DT_CLK(NULL, "timer1_gfclk_mux", "timer1_gfclk_mux"),
+	DT_CLK(NULL, "timer2_gfclk_mux", "timer2_gfclk_mux"),
+	DT_CLK(NULL, "timer3_gfclk_mux", "timer3_gfclk_mux"),
+	DT_CLK(NULL, "timer4_gfclk_mux", "timer4_gfclk_mux"),
+	DT_CLK(NULL, "timer5_gfclk_mux", "timer5_gfclk_mux"),
+	DT_CLK(NULL, "timer6_gfclk_mux", "timer6_gfclk_mux"),
+	DT_CLK(NULL, "timer7_gfclk_mux", "timer7_gfclk_mux"),
+	DT_CLK(NULL, "timer8_gfclk_mux", "timer8_gfclk_mux"),
+	DT_CLK(NULL, "timer9_gfclk_mux", "timer9_gfclk_mux"),
+	DT_CLK(NULL, "uart10_gfclk_mux", "uart10_gfclk_mux"),
+	DT_CLK(NULL, "uart1_gfclk_mux", "uart1_gfclk_mux"),
+	DT_CLK(NULL, "uart2_gfclk_mux", "uart2_gfclk_mux"),
+	DT_CLK(NULL, "uart3_gfclk_mux", "uart3_gfclk_mux"),
+	DT_CLK(NULL, "uart4_gfclk_mux", "uart4_gfclk_mux"),
+	DT_CLK(NULL, "uart5_gfclk_mux", "uart5_gfclk_mux"),
+	DT_CLK(NULL, "uart6_gfclk_mux", "uart6_gfclk_mux"),
+	DT_CLK(NULL, "uart7_gfclk_mux", "uart7_gfclk_mux"),
+	DT_CLK(NULL, "uart8_gfclk_mux", "uart8_gfclk_mux"),
+	DT_CLK(NULL, "uart9_gfclk_mux", "uart9_gfclk_mux"),
+	DT_CLK(NULL, "vip1_gclk_mux", "vip1_gclk_mux"),
+	DT_CLK(NULL, "vip2_gclk_mux", "vip2_gclk_mux"),
+	DT_CLK(NULL, "vip3_gclk_mux", "vip3_gclk_mux"),
+	DT_CLK(NULL, "gpmc_ck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("4ae18000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48032000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48034000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48036000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("4803e000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48086000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48088000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48820000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48822000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48824000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48826000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
+	{ .node_name = NULL },
+};
+
+int __init dra7xx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck;
+
+	ti_dt_clocks_register(dra7xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	abe_dpll_mux = clk_get_sys(NULL, "abe_dpll_sys_clk_mux");
+	sys_clkin2 = clk_get_sys(NULL, "sys_clkin2");
+	dpll_ck = clk_get_sys(NULL, "dpll_abe_ck");
+
+	rc = clk_set_parent(abe_dpll_mux, sys_clkin2);
+	if (!rc)
+		rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	dpll_ck = clk_get_sys(NULL, "dpll_gmac_ck");
+	rc = clk_set_rate(dpll_ck, DRA7_DPLL_GMAC_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure GMAC DPLL!\n", __func__);
+
+	return rc;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 50c532c..671c8af 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -241,6 +241,7 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
+int dra7xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 17/41] CLK: TI: add am33xx clock init file

[Tero Kristo]

clk-33xx.c now contains the clock init functionality for am33xx, including
DT clock registration and adding of static clkdev entries.

This patch also moves the omap2_clk_enable_init_clocks declaration to
the driver include, as this is needed by the am33xx clock init code.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock.h |    1 -
 drivers/clk/ti/Makefile     |    1 +
 drivers/clk/ti/clk-33xx.c   |  161 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h      |    2 +
 4 files changed, 164 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-33xx.c

diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b83fca6..1da9dc3 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -249,7 +249,6 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
 int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index f8ae4b5..7eb6f2b 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -2,6 +2,7 @@ ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
+obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
new file mode 100644
index 0000000..776ee45
--- /dev/null
+++ b/drivers/clk/ti/clk-33xx.c
@@ -0,0 +1,161 @@
+/*
+ * AM33XX Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+static struct ti_dt_clk am33xx_clks[] = {
+	DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
+	DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_24000000_ck", "virt_24000000_ck"),
+	DT_CLK(NULL, "virt_25000000_ck", "virt_25000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tclkin_ck", "tclkin_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m4_ck", "dpll_core_m4_ck"),
+	DT_CLK(NULL, "dpll_core_m5_ck", "dpll_core_m5_ck"),
+	DT_CLK(NULL, "dpll_core_m6_ck", "dpll_core_m6_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK("cpu0", NULL, "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_div2_ck", "dpll_ddr_m2_div2_ck"),
+	DT_CLK(NULL, "dpll_disp_ck", "dpll_disp_ck"),
+	DT_CLK(NULL, "dpll_disp_m2_ck", "dpll_disp_m2_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", "dpll_per_m2_div4_wkupdm_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_ck", "dpll_per_m2_div4_ck"),
+	DT_CLK(NULL, "adc_tsc_fck", "adc_tsc_fck"),
+	DT_CLK(NULL, "cefuse_fck", "cefuse_fck"),
+	DT_CLK(NULL, "clkdiv32k_ck", "clkdiv32k_ck"),
+	DT_CLK(NULL, "clkdiv32k_ick", "clkdiv32k_ick"),
+	DT_CLK(NULL, "dcan0_fck", "dcan0_fck"),
+	DT_CLK("481cc000.d_can", NULL, "dcan0_fck"),
+	DT_CLK(NULL, "dcan1_fck", "dcan1_fck"),
+	DT_CLK("481d0000.d_can", NULL, "dcan1_fck"),
+	DT_CLK(NULL, "pruss_ocp_gclk", "pruss_ocp_gclk"),
+	DT_CLK(NULL, "mcasp0_fck", "mcasp0_fck"),
+	DT_CLK(NULL, "mcasp1_fck", "mcasp1_fck"),
+	DT_CLK(NULL, "mmu_fck", "mmu_fck"),
+	DT_CLK(NULL, "smartreflex0_fck", "smartreflex0_fck"),
+	DT_CLK(NULL, "smartreflex1_fck", "smartreflex1_fck"),
+	DT_CLK(NULL, "sha0_fck", "sha0_fck"),
+	DT_CLK(NULL, "aes0_fck", "aes0_fck"),
+	DT_CLK(NULL, "rng_fck", "rng_fck"),
+	DT_CLK(NULL, "timer1_fck", "timer1_fck"),
+	DT_CLK(NULL, "timer2_fck", "timer2_fck"),
+	DT_CLK(NULL, "timer3_fck", "timer3_fck"),
+	DT_CLK(NULL, "timer4_fck", "timer4_fck"),
+	DT_CLK(NULL, "timer5_fck", "timer5_fck"),
+	DT_CLK(NULL, "timer6_fck", "timer6_fck"),
+	DT_CLK(NULL, "timer7_fck", "timer7_fck"),
+	DT_CLK(NULL, "usbotg_fck", "usbotg_fck"),
+	DT_CLK(NULL, "ieee5000_fck", "ieee5000_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "l4_rtc_gclk", "l4_rtc_gclk"),
+	DT_CLK(NULL, "l3_gclk", "l3_gclk"),
+	DT_CLK(NULL, "dpll_core_m4_div2_ck", "dpll_core_m4_div2_ck"),
+	DT_CLK(NULL, "l4hs_gclk", "l4hs_gclk"),
+	DT_CLK(NULL, "l3s_gclk", "l3s_gclk"),
+	DT_CLK(NULL, "l4fw_gclk", "l4fw_gclk"),
+	DT_CLK(NULL, "l4ls_gclk", "l4ls_gclk"),
+	DT_CLK(NULL, "clk_24mhz", "clk_24mhz"),
+	DT_CLK(NULL, "sysclk_div_ck", "sysclk_div_ck"),
+	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
+	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
+	DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"),
+	DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "lcd_gclk", "lcd_gclk"),
+	DT_CLK(NULL, "mmc_clk", "mmc_clk"),
+	DT_CLK(NULL, "gfx_fclk_clksel_ck", "gfx_fclk_clksel_ck"),
+	DT_CLK(NULL, "gfx_fck_div_ck", "gfx_fck_div_ck"),
+	DT_CLK(NULL, "sysclkout_pre_ck", "sysclkout_pre_ck"),
+	DT_CLK(NULL, "clkout2_div_ck", "clkout2_div_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "dbg_sysclk_ck", "dbg_sysclk_ck"),
+	DT_CLK(NULL, "dbg_clka_ck", "dbg_clka_ck"),
+	DT_CLK(NULL, "stm_pmd_clock_mux_ck", "stm_pmd_clock_mux_ck"),
+	DT_CLK(NULL, "trace_pmd_clk_mux_ck", "trace_pmd_clk_mux_ck"),
+	DT_CLK(NULL, "stm_clk_div_ck", "stm_clk_div_ck"),
+	DT_CLK(NULL, "trace_clk_div_ck", "trace_clk_div_ck"),
+	DT_CLK(NULL, "clkout2_ck", "clkout2_ck"),
+	DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
+	DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
+	DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
+	{ .node_name = NULL },
+};
+
+static const char *enable_init_clks[] = {
+	"dpll_ddr_m2_ck",
+	"dpll_mpu_m2_ck",
+	"l3_gclk",
+	"l4hs_gclk",
+	"l4fw_gclk",
+	"l4ls_gclk",
+	/* Required for external peripherals like, Audio codecs */
+	"clkout2_ck",
+};
+
+int __init am33xx_dt_clk_init(void)
+{
+	struct clk *clk1, *clk2;
+
+	ti_dt_clocks_register(am33xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	omap2_clk_enable_init_clocks(enable_init_clks,
+				     ARRAY_SIZE(enable_init_clks));
+
+	/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
+	 *    physically present, in such a case HWMOD enabling of
+	 *    clock would be failure with default parent. And timer
+	 *    probe thinks clock is already enabled, this leads to
+	 *    crash upon accessing timer 3 & 6 registers in probe.
+	 *    Fix by setting parent of both these timers to master
+	 *    oscillator clock.
+	 */
+
+	clk1 = clk_get_sys(NULL, "sys_clkin_ck");
+	clk2 = clk_get_sys(NULL, "timer3_fck");
+	clk_set_parent(clk2, clk1);
+
+	clk2 = clk_get_sys(NULL, "timer6_fck");
+	clk_set_parent(clk2, clk1);
+	/*
+	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
+	 * the design/spec, so as a result, for example, timer which supposed
+	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
+	 * not expected by any use-case, so change WDT1 clock source to PRCM
+	 * 32KHz clock.
+	 */
+	clk1 = clk_get_sys(NULL, "wdt1_fck");
+	clk2 = clk_get_sys(NULL, "clkdiv32k_ick");
+	clk_set_parent(clk1, clk2);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 671c8af..f7287ef 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -226,6 +226,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap2_clk_disable_autoidle_all(void);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -242,6 +243,7 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
+int am33xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 17/41] CLK: TI: add am33xx clock init file

[Tero Kristo]

clk-33xx.c now contains the clock init functionality for am33xx, including
DT clock registration and adding of static clkdev entries.

This patch also moves the omap2_clk_enable_init_clocks declaration to
the driver include, as this is needed by the am33xx clock init code.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock.h |    1 -
 drivers/clk/ti/Makefile     |    1 +
 drivers/clk/ti/clk-33xx.c   |  161 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h      |    2 +
 4 files changed, 164 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-33xx.c

diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b83fca6..1da9dc3 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -249,7 +249,6 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
 int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index f8ae4b5..7eb6f2b 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -2,6 +2,7 @@ ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
+obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
new file mode 100644
index 0000000..776ee45
--- /dev/null
+++ b/drivers/clk/ti/clk-33xx.c
@@ -0,0 +1,161 @@
+/*
+ * AM33XX Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo at ti.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+static struct ti_dt_clk am33xx_clks[] = {
+	DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
+	DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_24000000_ck", "virt_24000000_ck"),
+	DT_CLK(NULL, "virt_25000000_ck", "virt_25000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tclkin_ck", "tclkin_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m4_ck", "dpll_core_m4_ck"),
+	DT_CLK(NULL, "dpll_core_m5_ck", "dpll_core_m5_ck"),
+	DT_CLK(NULL, "dpll_core_m6_ck", "dpll_core_m6_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK("cpu0", NULL, "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_div2_ck", "dpll_ddr_m2_div2_ck"),
+	DT_CLK(NULL, "dpll_disp_ck", "dpll_disp_ck"),
+	DT_CLK(NULL, "dpll_disp_m2_ck", "dpll_disp_m2_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", "dpll_per_m2_div4_wkupdm_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_ck", "dpll_per_m2_div4_ck"),
+	DT_CLK(NULL, "adc_tsc_fck", "adc_tsc_fck"),
+	DT_CLK(NULL, "cefuse_fck", "cefuse_fck"),
+	DT_CLK(NULL, "clkdiv32k_ck", "clkdiv32k_ck"),
+	DT_CLK(NULL, "clkdiv32k_ick", "clkdiv32k_ick"),
+	DT_CLK(NULL, "dcan0_fck", "dcan0_fck"),
+	DT_CLK("481cc000.d_can", NULL, "dcan0_fck"),
+	DT_CLK(NULL, "dcan1_fck", "dcan1_fck"),
+	DT_CLK("481d0000.d_can", NULL, "dcan1_fck"),
+	DT_CLK(NULL, "pruss_ocp_gclk", "pruss_ocp_gclk"),
+	DT_CLK(NULL, "mcasp0_fck", "mcasp0_fck"),
+	DT_CLK(NULL, "mcasp1_fck", "mcasp1_fck"),
+	DT_CLK(NULL, "mmu_fck", "mmu_fck"),
+	DT_CLK(NULL, "smartreflex0_fck", "smartreflex0_fck"),
+	DT_CLK(NULL, "smartreflex1_fck", "smartreflex1_fck"),
+	DT_CLK(NULL, "sha0_fck", "sha0_fck"),
+	DT_CLK(NULL, "aes0_fck", "aes0_fck"),
+	DT_CLK(NULL, "rng_fck", "rng_fck"),
+	DT_CLK(NULL, "timer1_fck", "timer1_fck"),
+	DT_CLK(NULL, "timer2_fck", "timer2_fck"),
+	DT_CLK(NULL, "timer3_fck", "timer3_fck"),
+	DT_CLK(NULL, "timer4_fck", "timer4_fck"),
+	DT_CLK(NULL, "timer5_fck", "timer5_fck"),
+	DT_CLK(NULL, "timer6_fck", "timer6_fck"),
+	DT_CLK(NULL, "timer7_fck", "timer7_fck"),
+	DT_CLK(NULL, "usbotg_fck", "usbotg_fck"),
+	DT_CLK(NULL, "ieee5000_fck", "ieee5000_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "l4_rtc_gclk", "l4_rtc_gclk"),
+	DT_CLK(NULL, "l3_gclk", "l3_gclk"),
+	DT_CLK(NULL, "dpll_core_m4_div2_ck", "dpll_core_m4_div2_ck"),
+	DT_CLK(NULL, "l4hs_gclk", "l4hs_gclk"),
+	DT_CLK(NULL, "l3s_gclk", "l3s_gclk"),
+	DT_CLK(NULL, "l4fw_gclk", "l4fw_gclk"),
+	DT_CLK(NULL, "l4ls_gclk", "l4ls_gclk"),
+	DT_CLK(NULL, "clk_24mhz", "clk_24mhz"),
+	DT_CLK(NULL, "sysclk_div_ck", "sysclk_div_ck"),
+	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
+	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
+	DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"),
+	DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "lcd_gclk", "lcd_gclk"),
+	DT_CLK(NULL, "mmc_clk", "mmc_clk"),
+	DT_CLK(NULL, "gfx_fclk_clksel_ck", "gfx_fclk_clksel_ck"),
+	DT_CLK(NULL, "gfx_fck_div_ck", "gfx_fck_div_ck"),
+	DT_CLK(NULL, "sysclkout_pre_ck", "sysclkout_pre_ck"),
+	DT_CLK(NULL, "clkout2_div_ck", "clkout2_div_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "dbg_sysclk_ck", "dbg_sysclk_ck"),
+	DT_CLK(NULL, "dbg_clka_ck", "dbg_clka_ck"),
+	DT_CLK(NULL, "stm_pmd_clock_mux_ck", "stm_pmd_clock_mux_ck"),
+	DT_CLK(NULL, "trace_pmd_clk_mux_ck", "trace_pmd_clk_mux_ck"),
+	DT_CLK(NULL, "stm_clk_div_ck", "stm_clk_div_ck"),
+	DT_CLK(NULL, "trace_clk_div_ck", "trace_clk_div_ck"),
+	DT_CLK(NULL, "clkout2_ck", "clkout2_ck"),
+	DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
+	DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
+	DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
+	{ .node_name = NULL },
+};
+
+static const char *enable_init_clks[] = {
+	"dpll_ddr_m2_ck",
+	"dpll_mpu_m2_ck",
+	"l3_gclk",
+	"l4hs_gclk",
+	"l4fw_gclk",
+	"l4ls_gclk",
+	/* Required for external peripherals like, Audio codecs */
+	"clkout2_ck",
+};
+
+int __init am33xx_dt_clk_init(void)
+{
+	struct clk *clk1, *clk2;
+
+	ti_dt_clocks_register(am33xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	omap2_clk_enable_init_clocks(enable_init_clks,
+				     ARRAY_SIZE(enable_init_clks));
+
+	/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
+	 *    physically present, in such a case HWMOD enabling of
+	 *    clock would be failure with default parent. And timer
+	 *    probe thinks clock is already enabled, this leads to
+	 *    crash upon accessing timer 3 & 6 registers in probe.
+	 *    Fix by setting parent of both these timers to master
+	 *    oscillator clock.
+	 */
+
+	clk1 = clk_get_sys(NULL, "sys_clkin_ck");
+	clk2 = clk_get_sys(NULL, "timer3_fck");
+	clk_set_parent(clk2, clk1);
+
+	clk2 = clk_get_sys(NULL, "timer6_fck");
+	clk_set_parent(clk2, clk1);
+	/*
+	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
+	 * the design/spec, so as a result, for example, timer which supposed
+	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
+	 * not expected by any use-case, so change WDT1 clock source to PRCM
+	 * 32KHz clock.
+	 */
+	clk1 = clk_get_sys(NULL, "wdt1_fck");
+	clk2 = clk_get_sys(NULL, "clkdiv32k_ick");
+	clk_set_parent(clk1, clk2);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 671c8af..f7287ef 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -226,6 +226,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap2_clk_disable_autoidle_all(void);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -242,6 +243,7 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
+int am33xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 19/41] CLK: TI: add omap3 clock init file

[Tero Kristo]

clk-3xxx.c now contains the clock init functionality for omap3, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock3xxx.h |    1 -
 drivers/clk/ti/Makefile         |    2 +-
 drivers/clk/ti/clk-3xxx.c       |  401 +++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h          |    5 +
 4 files changed, 407 insertions(+), 2 deletions(-)
 create mode 100644 drivers/clk/ti/clk-3xxx.c

diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
index dab90e2..78d9f56 100644
--- a/arch/arm/mach-omap2/clock3xxx.h
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -11,7 +11,6 @@
 int omap3xxx_clk_init(void);
 int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
 					unsigned long parent_rate);
-void omap3_clk_lock_dpll5(void);
 
 extern struct clk *sdrc_ick_p;
 extern struct clk *arm_fck_p;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index e42a703..ab386c8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,7 +3,7 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= interface.o
+obj-$(CONFIG_ARCH_OMAP3)		+= interface.o clk-3xxx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
new file mode 100644
index 0000000..d323023
--- /dev/null
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -0,0 +1,401 @@
+/*
+ * OMAP3 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+
+static struct ti_dt_clk omap3xxx_clks[] = {
+	DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
+	DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
+	DT_CLK(NULL, "virt_12m_ck", "virt_12m_ck"),
+	DT_CLK(NULL, "virt_13m_ck", "virt_13m_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_38_4m_ck", "virt_38_4m_ck"),
+	DT_CLK(NULL, "osc_sys_ck", "osc_sys_ck"),
+	DT_CLK("twl", "fck", "osc_sys_ck"),
+	DT_CLK(NULL, "sys_ck", "sys_ck"),
+	DT_CLK(NULL, "omap_96m_alwon_fck", "omap_96m_alwon_fck"),
+	DT_CLK("etb", "emu_core_alwon_ck", "emu_core_alwon_ck"),
+	DT_CLK(NULL, "sys_altclk", "sys_altclk"),
+	DT_CLK(NULL, "mcbsp_clks", "mcbsp_clks"),
+	DT_CLK(NULL, "sys_clkout1", "sys_clkout1"),
+	DT_CLK(NULL, "dpll1_ck", "dpll1_ck"),
+	DT_CLK(NULL, "dpll1_x2_ck", "dpll1_x2_ck"),
+	DT_CLK(NULL, "dpll1_x2m2_ck", "dpll1_x2m2_ck"),
+	DT_CLK(NULL, "dpll3_ck", "dpll3_ck"),
+	DT_CLK(NULL, "core_ck", "core_ck"),
+	DT_CLK(NULL, "dpll3_x2_ck", "dpll3_x2_ck"),
+	DT_CLK(NULL, "dpll3_m2_ck", "dpll3_m2_ck"),
+	DT_CLK(NULL, "dpll3_m2x2_ck", "dpll3_m2x2_ck"),
+	DT_CLK(NULL, "dpll3_m3_ck", "dpll3_m3_ck"),
+	DT_CLK(NULL, "dpll3_m3x2_ck", "dpll3_m3x2_ck"),
+	DT_CLK(NULL, "dpll4_ck", "dpll4_ck"),
+	DT_CLK(NULL, "dpll4_x2_ck", "dpll4_x2_ck"),
+	DT_CLK(NULL, "omap_96m_fck", "omap_96m_fck"),
+	DT_CLK(NULL, "cm_96m_fck", "cm_96m_fck"),
+	DT_CLK(NULL, "omap_54m_fck", "omap_54m_fck"),
+	DT_CLK(NULL, "omap_48m_fck", "omap_48m_fck"),
+	DT_CLK(NULL, "omap_12m_fck", "omap_12m_fck"),
+	DT_CLK(NULL, "dpll4_m2_ck", "dpll4_m2_ck"),
+	DT_CLK(NULL, "dpll4_m2x2_ck", "dpll4_m2x2_ck"),
+	DT_CLK(NULL, "dpll4_m3_ck", "dpll4_m3_ck"),
+	DT_CLK(NULL, "dpll4_m3x2_ck", "dpll4_m3x2_ck"),
+	DT_CLK(NULL, "dpll4_m4_ck", "dpll4_m4_ck"),
+	DT_CLK(NULL, "dpll4_m4x2_ck", "dpll4_m4x2_ck"),
+	DT_CLK(NULL, "dpll4_m5_ck", "dpll4_m5_ck"),
+	DT_CLK(NULL, "dpll4_m5x2_ck", "dpll4_m5x2_ck"),
+	DT_CLK(NULL, "dpll4_m6_ck", "dpll4_m6_ck"),
+	DT_CLK(NULL, "dpll4_m6x2_ck", "dpll4_m6x2_ck"),
+	DT_CLK("etb", "emu_per_alwon_ck", "emu_per_alwon_ck"),
+	DT_CLK(NULL, "clkout2_src_ck", "clkout2_src_ck"),
+	DT_CLK(NULL, "sys_clkout2", "sys_clkout2"),
+	DT_CLK(NULL, "corex2_fck", "corex2_fck"),
+	DT_CLK(NULL, "dpll1_fck", "dpll1_fck"),
+	DT_CLK(NULL, "mpu_ck", "mpu_ck"),
+	DT_CLK(NULL, "arm_fck", "arm_fck"),
+	DT_CLK("etb", "emu_mpu_alwon_ck", "emu_mpu_alwon_ck"),
+	DT_CLK(NULL, "l3_ick", "l3_ick"),
+	DT_CLK(NULL, "l4_ick", "l4_ick"),
+	DT_CLK(NULL, "rm_ick", "rm_ick"),
+	DT_CLK(NULL, "gpt10_fck", "gpt10_fck"),
+	DT_CLK(NULL, "gpt11_fck", "gpt11_fck"),
+	DT_CLK(NULL, "core_96m_fck", "core_96m_fck"),
+	DT_CLK(NULL, "mmchs2_fck", "mmchs2_fck"),
+	DT_CLK(NULL, "mmchs1_fck", "mmchs1_fck"),
+	DT_CLK(NULL, "i2c3_fck", "i2c3_fck"),
+	DT_CLK(NULL, "i2c2_fck", "i2c2_fck"),
+	DT_CLK(NULL, "i2c1_fck", "i2c1_fck"),
+	DT_CLK(NULL, "mcbsp5_fck", "mcbsp5_fck"),
+	DT_CLK(NULL, "mcbsp1_fck", "mcbsp1_fck"),
+	DT_CLK(NULL, "core_48m_fck", "core_48m_fck"),
+	DT_CLK(NULL, "mcspi4_fck", "mcspi4_fck"),
+	DT_CLK(NULL, "mcspi3_fck", "mcspi3_fck"),
+	DT_CLK(NULL, "mcspi2_fck", "mcspi2_fck"),
+	DT_CLK(NULL, "mcspi1_fck", "mcspi1_fck"),
+	DT_CLK(NULL, "uart2_fck", "uart2_fck"),
+	DT_CLK(NULL, "uart1_fck", "uart1_fck"),
+	DT_CLK(NULL, "core_12m_fck", "core_12m_fck"),
+	DT_CLK("omap_hdq.0", "fck", "hdq_fck"),
+	DT_CLK(NULL, "hdq_fck", "hdq_fck"),
+	DT_CLK(NULL, "core_l3_ick", "core_l3_ick"),
+	DT_CLK(NULL, "sdrc_ick", "sdrc_ick"),
+	DT_CLK(NULL, "gpmc_fck", "gpmc_fck"),
+	DT_CLK(NULL, "core_l4_ick", "core_l4_ick"),
+	DT_CLK("omap_hsmmc.1", "ick", "mmchs2_ick"),
+	DT_CLK("omap_hsmmc.0", "ick", "mmchs1_ick"),
+	DT_CLK(NULL, "mmchs2_ick", "mmchs2_ick"),
+	DT_CLK(NULL, "mmchs1_ick", "mmchs1_ick"),
+	DT_CLK("omap_hdq.0", "ick", "hdq_ick"),
+	DT_CLK(NULL, "hdq_ick", "hdq_ick"),
+	DT_CLK("omap2_mcspi.4", "ick", "mcspi4_ick"),
+	DT_CLK("omap2_mcspi.3", "ick", "mcspi3_ick"),
+	DT_CLK("omap2_mcspi.2", "ick", "mcspi2_ick"),
+	DT_CLK("omap2_mcspi.1", "ick", "mcspi1_ick"),
+	DT_CLK(NULL, "mcspi4_ick", "mcspi4_ick"),
+	DT_CLK(NULL, "mcspi3_ick", "mcspi3_ick"),
+	DT_CLK(NULL, "mcspi2_ick", "mcspi2_ick"),
+	DT_CLK(NULL, "mcspi1_ick", "mcspi1_ick"),
+	DT_CLK("omap_i2c.3", "ick", "i2c3_ick"),
+	DT_CLK("omap_i2c.2", "ick", "i2c2_ick"),
+	DT_CLK("omap_i2c.1", "ick", "i2c1_ick"),
+	DT_CLK(NULL, "i2c3_ick", "i2c3_ick"),
+	DT_CLK(NULL, "i2c2_ick", "i2c2_ick"),
+	DT_CLK(NULL, "i2c1_ick", "i2c1_ick"),
+	DT_CLK(NULL, "uart2_ick", "uart2_ick"),
+	DT_CLK(NULL, "uart1_ick", "uart1_ick"),
+	DT_CLK(NULL, "gpt11_ick", "gpt11_ick"),
+	DT_CLK(NULL, "gpt10_ick", "gpt10_ick"),
+	DT_CLK("omap-mcbsp.5", "ick", "mcbsp5_ick"),
+	DT_CLK("omap-mcbsp.1", "ick", "mcbsp1_ick"),
+	DT_CLK(NULL, "mcbsp5_ick", "mcbsp5_ick"),
+	DT_CLK(NULL, "mcbsp1_ick", "mcbsp1_ick"),
+	DT_CLK(NULL, "omapctrl_ick", "omapctrl_ick"),
+	DT_CLK(NULL, "dss_tv_fck", "dss_tv_fck"),
+	DT_CLK(NULL, "dss_96m_fck", "dss_96m_fck"),
+	DT_CLK(NULL, "dss2_alwon_fck", "dss2_alwon_fck"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "dummy_ck"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "dummy_ck"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "dummy_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "dummy_ck"),
+	DT_CLK(NULL, "init_60m_fclk", "dummy_ck"),
+	DT_CLK(NULL, "gpt1_fck", "gpt1_fck"),
+	DT_CLK(NULL, "aes2_ick", "aes2_ick"),
+	DT_CLK(NULL, "wkup_32k_fck", "wkup_32k_fck"),
+	DT_CLK(NULL, "gpio1_dbck", "gpio1_dbck"),
+	DT_CLK(NULL, "sha12_ick", "sha12_ick"),
+	DT_CLK(NULL, "wdt2_fck", "wdt2_fck"),
+	DT_CLK("omap_wdt", "ick", "wdt2_ick"),
+	DT_CLK(NULL, "wdt2_ick", "wdt2_ick"),
+	DT_CLK(NULL, "wdt1_ick", "wdt1_ick"),
+	DT_CLK(NULL, "gpio1_ick", "gpio1_ick"),
+	DT_CLK(NULL, "omap_32ksync_ick", "omap_32ksync_ick"),
+	DT_CLK(NULL, "gpt12_ick", "gpt12_ick"),
+	DT_CLK(NULL, "gpt1_ick", "gpt1_ick"),
+	DT_CLK(NULL, "per_96m_fck", "per_96m_fck"),
+	DT_CLK(NULL, "per_48m_fck", "per_48m_fck"),
+	DT_CLK(NULL, "uart3_fck", "uart3_fck"),
+	DT_CLK(NULL, "gpt2_fck", "gpt2_fck"),
+	DT_CLK(NULL, "gpt3_fck", "gpt3_fck"),
+	DT_CLK(NULL, "gpt4_fck", "gpt4_fck"),
+	DT_CLK(NULL, "gpt5_fck", "gpt5_fck"),
+	DT_CLK(NULL, "gpt6_fck", "gpt6_fck"),
+	DT_CLK(NULL, "gpt7_fck", "gpt7_fck"),
+	DT_CLK(NULL, "gpt8_fck", "gpt8_fck"),
+	DT_CLK(NULL, "gpt9_fck", "gpt9_fck"),
+	DT_CLK(NULL, "per_32k_alwon_fck", "per_32k_alwon_fck"),
+	DT_CLK(NULL, "gpio6_dbck", "gpio6_dbck"),
+	DT_CLK(NULL, "gpio5_dbck", "gpio5_dbck"),
+	DT_CLK(NULL, "gpio4_dbck", "gpio4_dbck"),
+	DT_CLK(NULL, "gpio3_dbck", "gpio3_dbck"),
+	DT_CLK(NULL, "gpio2_dbck", "gpio2_dbck"),
+	DT_CLK(NULL, "wdt3_fck", "wdt3_fck"),
+	DT_CLK(NULL, "per_l4_ick", "per_l4_ick"),
+	DT_CLK(NULL, "gpio6_ick", "gpio6_ick"),
+	DT_CLK(NULL, "gpio5_ick", "gpio5_ick"),
+	DT_CLK(NULL, "gpio4_ick", "gpio4_ick"),
+	DT_CLK(NULL, "gpio3_ick", "gpio3_ick"),
+	DT_CLK(NULL, "gpio2_ick", "gpio2_ick"),
+	DT_CLK(NULL, "wdt3_ick", "wdt3_ick"),
+	DT_CLK(NULL, "uart3_ick", "uart3_ick"),
+	DT_CLK(NULL, "uart4_ick", "uart4_ick"),
+	DT_CLK(NULL, "gpt9_ick", "gpt9_ick"),
+	DT_CLK(NULL, "gpt8_ick", "gpt8_ick"),
+	DT_CLK(NULL, "gpt7_ick", "gpt7_ick"),
+	DT_CLK(NULL, "gpt6_ick", "gpt6_ick"),
+	DT_CLK(NULL, "gpt5_ick", "gpt5_ick"),
+	DT_CLK(NULL, "gpt4_ick", "gpt4_ick"),
+	DT_CLK(NULL, "gpt3_ick", "gpt3_ick"),
+	DT_CLK(NULL, "gpt2_ick", "gpt2_ick"),
+	DT_CLK("omap-mcbsp.2", "ick", "mcbsp2_ick"),
+	DT_CLK("omap-mcbsp.3", "ick", "mcbsp3_ick"),
+	DT_CLK("omap-mcbsp.4", "ick", "mcbsp4_ick"),
+	DT_CLK(NULL, "mcbsp4_ick", "mcbsp2_ick"),
+	DT_CLK(NULL, "mcbsp3_ick", "mcbsp3_ick"),
+	DT_CLK(NULL, "mcbsp2_ick", "mcbsp4_ick"),
+	DT_CLK(NULL, "mcbsp2_fck", "mcbsp2_fck"),
+	DT_CLK(NULL, "mcbsp3_fck", "mcbsp3_fck"),
+	DT_CLK(NULL, "mcbsp4_fck", "mcbsp4_fck"),
+	DT_CLK("etb", "emu_src_ck", "emu_src_ck"),
+	DT_CLK(NULL, "emu_src_ck", "emu_src_ck"),
+	DT_CLK(NULL, "pclk_fck", "pclk_fck"),
+	DT_CLK(NULL, "pclkx2_fck", "pclkx2_fck"),
+	DT_CLK(NULL, "atclk_fck", "atclk_fck"),
+	DT_CLK(NULL, "traceclk_src_fck", "traceclk_src_fck"),
+	DT_CLK(NULL, "traceclk_fck", "traceclk_fck"),
+	DT_CLK(NULL, "secure_32k_fck", "secure_32k_fck"),
+	DT_CLK(NULL, "gpt12_fck", "gpt12_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "timer_32k_ck", "omap_32k_fck"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_ck"),
+	DT_CLK(NULL, "cpufreq_ck", "dpll1_ck"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap34xx_omap36xx_clks[] = {
+	DT_CLK(NULL, "aes1_ick", "aes1_ick"),
+	DT_CLK("omap_rng", "ick", "rng_ick"),
+	DT_CLK("omap3-rom-rng", "ick", "rng_ick"),
+	DT_CLK(NULL, "sha11_ick", "sha11_ick"),
+	DT_CLK(NULL, "des1_ick", "des1_ick"),
+	DT_CLK(NULL, "cam_mclk", "cam_mclk"),
+	DT_CLK(NULL, "cam_ick", "cam_ick"),
+	DT_CLK(NULL, "csi2_96m_fck", "csi2_96m_fck"),
+	DT_CLK(NULL, "security_l3_ick", "security_l3_ick"),
+	DT_CLK(NULL, "pka_ick", "pka_ick"),
+	DT_CLK(NULL, "icr_ick", "icr_ick"),
+	DT_CLK("omap-aes", "ick", "aes2_ick"),
+	DT_CLK("omap-sham", "ick", "sha12_ick"),
+	DT_CLK(NULL, "des2_ick", "des2_ick"),
+	DT_CLK(NULL, "mspro_ick", "mspro_ick"),
+	DT_CLK(NULL, "mailboxes_ick", "mailboxes_ick"),
+	DT_CLK(NULL, "ssi_l4_ick", "ssi_l4_ick"),
+	DT_CLK(NULL, "sr1_fck", "sr1_fck"),
+	DT_CLK(NULL, "sr2_fck", "sr2_fck"),
+	DT_CLK(NULL, "sr_l4_ick", "sr_l4_ick"),
+	DT_CLK(NULL, "security_l4_ick2", "security_l4_ick2"),
+	DT_CLK(NULL, "wkup_l4_ick", "wkup_l4_ick"),
+	DT_CLK(NULL, "dpll2_fck", "dpll2_fck"),
+	DT_CLK(NULL, "iva2_ck", "iva2_ck"),
+	DT_CLK(NULL, "modem_fck", "modem_fck"),
+	DT_CLK(NULL, "sad2d_ick", "sad2d_ick"),
+	DT_CLK(NULL, "mad2d_ick", "mad2d_ick"),
+	DT_CLK(NULL, "mspro_fck", "mspro_fck"),
+	DT_CLK(NULL, "dpll2_ck", "dpll2_ck"),
+	DT_CLK(NULL, "dpll2_m2_ck", "dpll2_m2_ck"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_omap3430es2plus_clks[] = {
+	DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es2"),
+	DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es2"),
+	DT_CLK("musb-omap2430", "ick", "hsotgusb_ick_3430es2"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es2"),
+	DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es2"),
+	DT_CLK(NULL, "usim_fck", "usim_fck"),
+	DT_CLK(NULL, "usim_ick", "usim_ick"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap3430es1_clks[] = {
+	DT_CLK(NULL, "gfx_l3_ck", "gfx_l3_ck"),
+	DT_CLK(NULL, "gfx_l3_fck", "gfx_l3_fck"),
+	DT_CLK(NULL, "gfx_l3_ick", "gfx_l3_ick"),
+	DT_CLK(NULL, "gfx_cg1_ck", "gfx_cg1_ck"),
+	DT_CLK(NULL, "gfx_cg2_ck", "gfx_cg2_ck"),
+	DT_CLK(NULL, "d2d_26m_fck", "d2d_26m_fck"),
+	DT_CLK(NULL, "fshostusb_fck", "fshostusb_fck"),
+	DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es1"),
+	DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es1"),
+	DT_CLK("musb-omap2430", "ick", "hsotgusb_ick_3430es1"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es1"),
+	DT_CLK(NULL, "fac_ick", "fac_ick"),
+	DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es1"),
+	DT_CLK(NULL, "usb_l4_ick", "usb_l4_ick"),
+	DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es1"),
+	DT_CLK("omapdss_dss", "ick", "dss_ick_3430es1"),
+	DT_CLK(NULL, "dss_ick", "dss_ick_3430es1"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_am35xx_omap3430es2plus_clks[] = {
+	DT_CLK(NULL, "virt_16_8m_ck", "virt_16_8m_ck"),
+	DT_CLK(NULL, "dpll5_ck", "dpll5_ck"),
+	DT_CLK(NULL, "dpll5_m2_ck", "dpll5_m2_ck"),
+	DT_CLK(NULL, "sgx_fck", "sgx_fck"),
+	DT_CLK(NULL, "sgx_ick", "sgx_ick"),
+	DT_CLK(NULL, "cpefuse_fck", "cpefuse_fck"),
+	DT_CLK(NULL, "ts_fck", "ts_fck"),
+	DT_CLK(NULL, "usbtll_fck", "usbtll_fck"),
+	DT_CLK(NULL, "usbtll_ick", "usbtll_ick"),
+	DT_CLK("omap_hsmmc.2", "ick", "mmchs3_ick"),
+	DT_CLK(NULL, "mmchs3_ick", "mmchs3_ick"),
+	DT_CLK(NULL, "mmchs3_fck", "mmchs3_fck"),
+	DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es2"),
+	DT_CLK("omapdss_dss", "ick", "dss_ick_3430es2"),
+	DT_CLK(NULL, "dss_ick", "dss_ick_3430es2"),
+	DT_CLK(NULL, "usbhost_120m_fck", "usbhost_120m_fck"),
+	DT_CLK(NULL, "usbhost_48m_fck", "usbhost_48m_fck"),
+	DT_CLK(NULL, "usbhost_ick", "usbhost_ick"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk am35xx_clks[] = {
+	DT_CLK(NULL, "ipss_ick", "ipss_ick"),
+	DT_CLK(NULL, "rmii_ck", "rmii_ck"),
+	DT_CLK(NULL, "pclk_ck", "pclk_ck"),
+	DT_CLK(NULL, "emac_ick", "emac_ick"),
+	DT_CLK(NULL, "emac_fck", "emac_fck"),
+	DT_CLK("davinci_emac.0", NULL, "emac_ick"),
+	DT_CLK("davinci_mdio.0", NULL, "emac_fck"),
+	DT_CLK("vpfe-capture", "master", "vpfe_ick"),
+	DT_CLK("vpfe-capture", "slave", "vpfe_fck"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_am35xx"),
+	DT_CLK(NULL, "hsotgusb_fck", "hsotgusb_fck_am35xx"),
+	DT_CLK(NULL, "hecc_ck", "hecc_ck"),
+	DT_CLK(NULL, "uart4_ick", "uart4_ick_am35xx"),
+	DT_CLK(NULL, "uart4_fck", "uart4_fck_am35xx"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_clks[] = {
+	DT_CLK(NULL, "omap_192m_alwon_fck", "omap_192m_alwon_fck"),
+	DT_CLK(NULL, "uart4_fck", "uart4_fck"),
+	{ .node_name = NULL },
+};
+
+static const char *enable_init_clks[] = {
+	"sdrc_ick",
+	"gpmc_fck",
+	"omapctrl_ick",
+};
+
+enum {
+	OMAP3_SOC_AM35XX,
+	OMAP3_SOC_OMAP3430_ES1,
+	OMAP3_SOC_OMAP3430_ES2_PLUS,
+	OMAP3_SOC_OMAP3630,
+	OMAP3_SOC_TI81XX,
+};
+
+static int __init omap3xxx_dt_clk_init(int soc_type)
+{
+	if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES1 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
+		ti_dt_clocks_register(omap3xxx_clks);
+
+	if (soc_type == OMAP3_SOC_AM35XX)
+		ti_dt_clocks_register(am35xx_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3630 || soc_type == OMAP3_SOC_AM35XX ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
+		ti_dt_clocks_register(omap36xx_am35xx_omap3430es2plus_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES1)
+		ti_dt_clocks_register(omap3430es1_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
+	    soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap36xx_omap3430es2plus_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES1 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
+	    soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap34xx_omap36xx_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap36xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	omap2_clk_enable_init_clocks(enable_init_clks,
+				     ARRAY_SIZE(enable_init_clks));
+
+	pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 1000000),
+		(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 100000) % 10,
+		(clk_get_rate(clk_get_sys(NULL, "core_ck")) / 1000000),
+		(clk_get_rate(clk_get_sys(NULL, "arm_fck")) / 1000000));
+
+	if (soc_type != OMAP3_SOC_TI81XX && soc_type != OMAP3_SOC_OMAP3430_ES1)
+		omap3_clk_lock_dpll5();
+
+	return 0;
+}
+
+int __init omap3430_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3430_ES2_PLUS);
+}
+
+int __init omap3630_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3630);
+}
+
+int __init am35xx_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_AM35XX);
+}
+
+int __init ti81xx_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_TI81XX);
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 45d9d52..f134997 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -232,6 +232,7 @@ int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 int omap2_dflt_clk_enable(struct clk_hw *hw);
 void omap2_dflt_clk_disable(struct clk_hw *hw);
 int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap3_clk_lock_dpll5(void);
 
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -240,6 +241,10 @@ void ti_dt_clockdomains_setup(void);
 int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
+int omap3430_dt_clk_init(void);
+int omap3630_dt_clk_init(void);
+int am35xx_dt_clk_init(void);
+int ti81xx_dt_clk_init(void);
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
-- 
1.7.9.5

[PATCHv10 19/41] CLK: TI: add omap3 clock init file

[Tero Kristo]

clk-3xxx.c now contains the clock init functionality for omap3, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock3xxx.h |    1 -
 drivers/clk/ti/Makefile         |    2 +-
 drivers/clk/ti/clk-3xxx.c       |  401 +++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h          |    5 +
 4 files changed, 407 insertions(+), 2 deletions(-)
 create mode 100644 drivers/clk/ti/clk-3xxx.c

diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
index dab90e2..78d9f56 100644
--- a/arch/arm/mach-omap2/clock3xxx.h
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -11,7 +11,6 @@
 int omap3xxx_clk_init(void);
 int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
 					unsigned long parent_rate);
-void omap3_clk_lock_dpll5(void);
 
 extern struct clk *sdrc_ick_p;
 extern struct clk *arm_fck_p;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index e42a703..ab386c8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,7 +3,7 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= interface.o
+obj-$(CONFIG_ARCH_OMAP3)		+= interface.o clk-3xxx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
new file mode 100644
index 0000000..d323023
--- /dev/null
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -0,0 +1,401 @@
+/*
+ * OMAP3 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo at ti.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+
+static struct ti_dt_clk omap3xxx_clks[] = {
+	DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
+	DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
+	DT_CLK(NULL, "virt_12m_ck", "virt_12m_ck"),
+	DT_CLK(NULL, "virt_13m_ck", "virt_13m_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_38_4m_ck", "virt_38_4m_ck"),
+	DT_CLK(NULL, "osc_sys_ck", "osc_sys_ck"),
+	DT_CLK("twl", "fck", "osc_sys_ck"),
+	DT_CLK(NULL, "sys_ck", "sys_ck"),
+	DT_CLK(NULL, "omap_96m_alwon_fck", "omap_96m_alwon_fck"),
+	DT_CLK("etb", "emu_core_alwon_ck", "emu_core_alwon_ck"),
+	DT_CLK(NULL, "sys_altclk", "sys_altclk"),
+	DT_CLK(NULL, "mcbsp_clks", "mcbsp_clks"),
+	DT_CLK(NULL, "sys_clkout1", "sys_clkout1"),
+	DT_CLK(NULL, "dpll1_ck", "dpll1_ck"),
+	DT_CLK(NULL, "dpll1_x2_ck", "dpll1_x2_ck"),
+	DT_CLK(NULL, "dpll1_x2m2_ck", "dpll1_x2m2_ck"),
+	DT_CLK(NULL, "dpll3_ck", "dpll3_ck"),
+	DT_CLK(NULL, "core_ck", "core_ck"),
+	DT_CLK(NULL, "dpll3_x2_ck", "dpll3_x2_ck"),
+	DT_CLK(NULL, "dpll3_m2_ck", "dpll3_m2_ck"),
+	DT_CLK(NULL, "dpll3_m2x2_ck", "dpll3_m2x2_ck"),
+	DT_CLK(NULL, "dpll3_m3_ck", "dpll3_m3_ck"),
+	DT_CLK(NULL, "dpll3_m3x2_ck", "dpll3_m3x2_ck"),
+	DT_CLK(NULL, "dpll4_ck", "dpll4_ck"),
+	DT_CLK(NULL, "dpll4_x2_ck", "dpll4_x2_ck"),
+	DT_CLK(NULL, "omap_96m_fck", "omap_96m_fck"),
+	DT_CLK(NULL, "cm_96m_fck", "cm_96m_fck"),
+	DT_CLK(NULL, "omap_54m_fck", "omap_54m_fck"),
+	DT_CLK(NULL, "omap_48m_fck", "omap_48m_fck"),
+	DT_CLK(NULL, "omap_12m_fck", "omap_12m_fck"),
+	DT_CLK(NULL, "dpll4_m2_ck", "dpll4_m2_ck"),
+	DT_CLK(NULL, "dpll4_m2x2_ck", "dpll4_m2x2_ck"),
+	DT_CLK(NULL, "dpll4_m3_ck", "dpll4_m3_ck"),
+	DT_CLK(NULL, "dpll4_m3x2_ck", "dpll4_m3x2_ck"),
+	DT_CLK(NULL, "dpll4_m4_ck", "dpll4_m4_ck"),
+	DT_CLK(NULL, "dpll4_m4x2_ck", "dpll4_m4x2_ck"),
+	DT_CLK(NULL, "dpll4_m5_ck", "dpll4_m5_ck"),
+	DT_CLK(NULL, "dpll4_m5x2_ck", "dpll4_m5x2_ck"),
+	DT_CLK(NULL, "dpll4_m6_ck", "dpll4_m6_ck"),
+	DT_CLK(NULL, "dpll4_m6x2_ck", "dpll4_m6x2_ck"),
+	DT_CLK("etb", "emu_per_alwon_ck", "emu_per_alwon_ck"),
+	DT_CLK(NULL, "clkout2_src_ck", "clkout2_src_ck"),
+	DT_CLK(NULL, "sys_clkout2", "sys_clkout2"),
+	DT_CLK(NULL, "corex2_fck", "corex2_fck"),
+	DT_CLK(NULL, "dpll1_fck", "dpll1_fck"),
+	DT_CLK(NULL, "mpu_ck", "mpu_ck"),
+	DT_CLK(NULL, "arm_fck", "arm_fck"),
+	DT_CLK("etb", "emu_mpu_alwon_ck", "emu_mpu_alwon_ck"),
+	DT_CLK(NULL, "l3_ick", "l3_ick"),
+	DT_CLK(NULL, "l4_ick", "l4_ick"),
+	DT_CLK(NULL, "rm_ick", "rm_ick"),
+	DT_CLK(NULL, "gpt10_fck", "gpt10_fck"),
+	DT_CLK(NULL, "gpt11_fck", "gpt11_fck"),
+	DT_CLK(NULL, "core_96m_fck", "core_96m_fck"),
+	DT_CLK(NULL, "mmchs2_fck", "mmchs2_fck"),
+	DT_CLK(NULL, "mmchs1_fck", "mmchs1_fck"),
+	DT_CLK(NULL, "i2c3_fck", "i2c3_fck"),
+	DT_CLK(NULL, "i2c2_fck", "i2c2_fck"),
+	DT_CLK(NULL, "i2c1_fck", "i2c1_fck"),
+	DT_CLK(NULL, "mcbsp5_fck", "mcbsp5_fck"),
+	DT_CLK(NULL, "mcbsp1_fck", "mcbsp1_fck"),
+	DT_CLK(NULL, "core_48m_fck", "core_48m_fck"),
+	DT_CLK(NULL, "mcspi4_fck", "mcspi4_fck"),
+	DT_CLK(NULL, "mcspi3_fck", "mcspi3_fck"),
+	DT_CLK(NULL, "mcspi2_fck", "mcspi2_fck"),
+	DT_CLK(NULL, "mcspi1_fck", "mcspi1_fck"),
+	DT_CLK(NULL, "uart2_fck", "uart2_fck"),
+	DT_CLK(NULL, "uart1_fck", "uart1_fck"),
+	DT_CLK(NULL, "core_12m_fck", "core_12m_fck"),
+	DT_CLK("omap_hdq.0", "fck", "hdq_fck"),
+	DT_CLK(NULL, "hdq_fck", "hdq_fck"),
+	DT_CLK(NULL, "core_l3_ick", "core_l3_ick"),
+	DT_CLK(NULL, "sdrc_ick", "sdrc_ick"),
+	DT_CLK(NULL, "gpmc_fck", "gpmc_fck"),
+	DT_CLK(NULL, "core_l4_ick", "core_l4_ick"),
+	DT_CLK("omap_hsmmc.1", "ick", "mmchs2_ick"),
+	DT_CLK("omap_hsmmc.0", "ick", "mmchs1_ick"),
+	DT_CLK(NULL, "mmchs2_ick", "mmchs2_ick"),
+	DT_CLK(NULL, "mmchs1_ick", "mmchs1_ick"),
+	DT_CLK("omap_hdq.0", "ick", "hdq_ick"),
+	DT_CLK(NULL, "hdq_ick", "hdq_ick"),
+	DT_CLK("omap2_mcspi.4", "ick", "mcspi4_ick"),
+	DT_CLK("omap2_mcspi.3", "ick", "mcspi3_ick"),
+	DT_CLK("omap2_mcspi.2", "ick", "mcspi2_ick"),
+	DT_CLK("omap2_mcspi.1", "ick", "mcspi1_ick"),
+	DT_CLK(NULL, "mcspi4_ick", "mcspi4_ick"),
+	DT_CLK(NULL, "mcspi3_ick", "mcspi3_ick"),
+	DT_CLK(NULL, "mcspi2_ick", "mcspi2_ick"),
+	DT_CLK(NULL, "mcspi1_ick", "mcspi1_ick"),
+	DT_CLK("omap_i2c.3", "ick", "i2c3_ick"),
+	DT_CLK("omap_i2c.2", "ick", "i2c2_ick"),
+	DT_CLK("omap_i2c.1", "ick", "i2c1_ick"),
+	DT_CLK(NULL, "i2c3_ick", "i2c3_ick"),
+	DT_CLK(NULL, "i2c2_ick", "i2c2_ick"),
+	DT_CLK(NULL, "i2c1_ick", "i2c1_ick"),
+	DT_CLK(NULL, "uart2_ick", "uart2_ick"),
+	DT_CLK(NULL, "uart1_ick", "uart1_ick"),
+	DT_CLK(NULL, "gpt11_ick", "gpt11_ick"),
+	DT_CLK(NULL, "gpt10_ick", "gpt10_ick"),
+	DT_CLK("omap-mcbsp.5", "ick", "mcbsp5_ick"),
+	DT_CLK("omap-mcbsp.1", "ick", "mcbsp1_ick"),
+	DT_CLK(NULL, "mcbsp5_ick", "mcbsp5_ick"),
+	DT_CLK(NULL, "mcbsp1_ick", "mcbsp1_ick"),
+	DT_CLK(NULL, "omapctrl_ick", "omapctrl_ick"),
+	DT_CLK(NULL, "dss_tv_fck", "dss_tv_fck"),
+	DT_CLK(NULL, "dss_96m_fck", "dss_96m_fck"),
+	DT_CLK(NULL, "dss2_alwon_fck", "dss2_alwon_fck"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "dummy_ck"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "dummy_ck"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "dummy_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "dummy_ck"),
+	DT_CLK(NULL, "init_60m_fclk", "dummy_ck"),
+	DT_CLK(NULL, "gpt1_fck", "gpt1_fck"),
+	DT_CLK(NULL, "aes2_ick", "aes2_ick"),
+	DT_CLK(NULL, "wkup_32k_fck", "wkup_32k_fck"),
+	DT_CLK(NULL, "gpio1_dbck", "gpio1_dbck"),
+	DT_CLK(NULL, "sha12_ick", "sha12_ick"),
+	DT_CLK(NULL, "wdt2_fck", "wdt2_fck"),
+	DT_CLK("omap_wdt", "ick", "wdt2_ick"),
+	DT_CLK(NULL, "wdt2_ick", "wdt2_ick"),
+	DT_CLK(NULL, "wdt1_ick", "wdt1_ick"),
+	DT_CLK(NULL, "gpio1_ick", "gpio1_ick"),
+	DT_CLK(NULL, "omap_32ksync_ick", "omap_32ksync_ick"),
+	DT_CLK(NULL, "gpt12_ick", "gpt12_ick"),
+	DT_CLK(NULL, "gpt1_ick", "gpt1_ick"),
+	DT_CLK(NULL, "per_96m_fck", "per_96m_fck"),
+	DT_CLK(NULL, "per_48m_fck", "per_48m_fck"),
+	DT_CLK(NULL, "uart3_fck", "uart3_fck"),
+	DT_CLK(NULL, "gpt2_fck", "gpt2_fck"),
+	DT_CLK(NULL, "gpt3_fck", "gpt3_fck"),
+	DT_CLK(NULL, "gpt4_fck", "gpt4_fck"),
+	DT_CLK(NULL, "gpt5_fck", "gpt5_fck"),
+	DT_CLK(NULL, "gpt6_fck", "gpt6_fck"),
+	DT_CLK(NULL, "gpt7_fck", "gpt7_fck"),
+	DT_CLK(NULL, "gpt8_fck", "gpt8_fck"),
+	DT_CLK(NULL, "gpt9_fck", "gpt9_fck"),
+	DT_CLK(NULL, "per_32k_alwon_fck", "per_32k_alwon_fck"),
+	DT_CLK(NULL, "gpio6_dbck", "gpio6_dbck"),
+	DT_CLK(NULL, "gpio5_dbck", "gpio5_dbck"),
+	DT_CLK(NULL, "gpio4_dbck", "gpio4_dbck"),
+	DT_CLK(NULL, "gpio3_dbck", "gpio3_dbck"),
+	DT_CLK(NULL, "gpio2_dbck", "gpio2_dbck"),
+	DT_CLK(NULL, "wdt3_fck", "wdt3_fck"),
+	DT_CLK(NULL, "per_l4_ick", "per_l4_ick"),
+	DT_CLK(NULL, "gpio6_ick", "gpio6_ick"),
+	DT_CLK(NULL, "gpio5_ick", "gpio5_ick"),
+	DT_CLK(NULL, "gpio4_ick", "gpio4_ick"),
+	DT_CLK(NULL, "gpio3_ick", "gpio3_ick"),
+	DT_CLK(NULL, "gpio2_ick", "gpio2_ick"),
+	DT_CLK(NULL, "wdt3_ick", "wdt3_ick"),
+	DT_CLK(NULL, "uart3_ick", "uart3_ick"),
+	DT_CLK(NULL, "uart4_ick", "uart4_ick"),
+	DT_CLK(NULL, "gpt9_ick", "gpt9_ick"),
+	DT_CLK(NULL, "gpt8_ick", "gpt8_ick"),
+	DT_CLK(NULL, "gpt7_ick", "gpt7_ick"),
+	DT_CLK(NULL, "gpt6_ick", "gpt6_ick"),
+	DT_CLK(NULL, "gpt5_ick", "gpt5_ick"),
+	DT_CLK(NULL, "gpt4_ick", "gpt4_ick"),
+	DT_CLK(NULL, "gpt3_ick", "gpt3_ick"),
+	DT_CLK(NULL, "gpt2_ick", "gpt2_ick"),
+	DT_CLK("omap-mcbsp.2", "ick", "mcbsp2_ick"),
+	DT_CLK("omap-mcbsp.3", "ick", "mcbsp3_ick"),
+	DT_CLK("omap-mcbsp.4", "ick", "mcbsp4_ick"),
+	DT_CLK(NULL, "mcbsp4_ick", "mcbsp2_ick"),
+	DT_CLK(NULL, "mcbsp3_ick", "mcbsp3_ick"),
+	DT_CLK(NULL, "mcbsp2_ick", "mcbsp4_ick"),
+	DT_CLK(NULL, "mcbsp2_fck", "mcbsp2_fck"),
+	DT_CLK(NULL, "mcbsp3_fck", "mcbsp3_fck"),
+	DT_CLK(NULL, "mcbsp4_fck", "mcbsp4_fck"),
+	DT_CLK("etb", "emu_src_ck", "emu_src_ck"),
+	DT_CLK(NULL, "emu_src_ck", "emu_src_ck"),
+	DT_CLK(NULL, "pclk_fck", "pclk_fck"),
+	DT_CLK(NULL, "pclkx2_fck", "pclkx2_fck"),
+	DT_CLK(NULL, "atclk_fck", "atclk_fck"),
+	DT_CLK(NULL, "traceclk_src_fck", "traceclk_src_fck"),
+	DT_CLK(NULL, "traceclk_fck", "traceclk_fck"),
+	DT_CLK(NULL, "secure_32k_fck", "secure_32k_fck"),
+	DT_CLK(NULL, "gpt12_fck", "gpt12_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "timer_32k_ck", "omap_32k_fck"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_ck"),
+	DT_CLK(NULL, "cpufreq_ck", "dpll1_ck"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap34xx_omap36xx_clks[] = {
+	DT_CLK(NULL, "aes1_ick", "aes1_ick"),
+	DT_CLK("omap_rng", "ick", "rng_ick"),
+	DT_CLK("omap3-rom-rng", "ick", "rng_ick"),
+	DT_CLK(NULL, "sha11_ick", "sha11_ick"),
+	DT_CLK(NULL, "des1_ick", "des1_ick"),
+	DT_CLK(NULL, "cam_mclk", "cam_mclk"),
+	DT_CLK(NULL, "cam_ick", "cam_ick"),
+	DT_CLK(NULL, "csi2_96m_fck", "csi2_96m_fck"),
+	DT_CLK(NULL, "security_l3_ick", "security_l3_ick"),
+	DT_CLK(NULL, "pka_ick", "pka_ick"),
+	DT_CLK(NULL, "icr_ick", "icr_ick"),
+	DT_CLK("omap-aes", "ick", "aes2_ick"),
+	DT_CLK("omap-sham", "ick", "sha12_ick"),
+	DT_CLK(NULL, "des2_ick", "des2_ick"),
+	DT_CLK(NULL, "mspro_ick", "mspro_ick"),
+	DT_CLK(NULL, "mailboxes_ick", "mailboxes_ick"),
+	DT_CLK(NULL, "ssi_l4_ick", "ssi_l4_ick"),
+	DT_CLK(NULL, "sr1_fck", "sr1_fck"),
+	DT_CLK(NULL, "sr2_fck", "sr2_fck"),
+	DT_CLK(NULL, "sr_l4_ick", "sr_l4_ick"),
+	DT_CLK(NULL, "security_l4_ick2", "security_l4_ick2"),
+	DT_CLK(NULL, "wkup_l4_ick", "wkup_l4_ick"),
+	DT_CLK(NULL, "dpll2_fck", "dpll2_fck"),
+	DT_CLK(NULL, "iva2_ck", "iva2_ck"),
+	DT_CLK(NULL, "modem_fck", "modem_fck"),
+	DT_CLK(NULL, "sad2d_ick", "sad2d_ick"),
+	DT_CLK(NULL, "mad2d_ick", "mad2d_ick"),
+	DT_CLK(NULL, "mspro_fck", "mspro_fck"),
+	DT_CLK(NULL, "dpll2_ck", "dpll2_ck"),
+	DT_CLK(NULL, "dpll2_m2_ck", "dpll2_m2_ck"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_omap3430es2plus_clks[] = {
+	DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es2"),
+	DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es2"),
+	DT_CLK("musb-omap2430", "ick", "hsotgusb_ick_3430es2"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es2"),
+	DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es2"),
+	DT_CLK(NULL, "usim_fck", "usim_fck"),
+	DT_CLK(NULL, "usim_ick", "usim_ick"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap3430es1_clks[] = {
+	DT_CLK(NULL, "gfx_l3_ck", "gfx_l3_ck"),
+	DT_CLK(NULL, "gfx_l3_fck", "gfx_l3_fck"),
+	DT_CLK(NULL, "gfx_l3_ick", "gfx_l3_ick"),
+	DT_CLK(NULL, "gfx_cg1_ck", "gfx_cg1_ck"),
+	DT_CLK(NULL, "gfx_cg2_ck", "gfx_cg2_ck"),
+	DT_CLK(NULL, "d2d_26m_fck", "d2d_26m_fck"),
+	DT_CLK(NULL, "fshostusb_fck", "fshostusb_fck"),
+	DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es1"),
+	DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es1"),
+	DT_CLK("musb-omap2430", "ick", "hsotgusb_ick_3430es1"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es1"),
+	DT_CLK(NULL, "fac_ick", "fac_ick"),
+	DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es1"),
+	DT_CLK(NULL, "usb_l4_ick", "usb_l4_ick"),
+	DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es1"),
+	DT_CLK("omapdss_dss", "ick", "dss_ick_3430es1"),
+	DT_CLK(NULL, "dss_ick", "dss_ick_3430es1"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_am35xx_omap3430es2plus_clks[] = {
+	DT_CLK(NULL, "virt_16_8m_ck", "virt_16_8m_ck"),
+	DT_CLK(NULL, "dpll5_ck", "dpll5_ck"),
+	DT_CLK(NULL, "dpll5_m2_ck", "dpll5_m2_ck"),
+	DT_CLK(NULL, "sgx_fck", "sgx_fck"),
+	DT_CLK(NULL, "sgx_ick", "sgx_ick"),
+	DT_CLK(NULL, "cpefuse_fck", "cpefuse_fck"),
+	DT_CLK(NULL, "ts_fck", "ts_fck"),
+	DT_CLK(NULL, "usbtll_fck", "usbtll_fck"),
+	DT_CLK(NULL, "usbtll_ick", "usbtll_ick"),
+	DT_CLK("omap_hsmmc.2", "ick", "mmchs3_ick"),
+	DT_CLK(NULL, "mmchs3_ick", "mmchs3_ick"),
+	DT_CLK(NULL, "mmchs3_fck", "mmchs3_fck"),
+	DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es2"),
+	DT_CLK("omapdss_dss", "ick", "dss_ick_3430es2"),
+	DT_CLK(NULL, "dss_ick", "dss_ick_3430es2"),
+	DT_CLK(NULL, "usbhost_120m_fck", "usbhost_120m_fck"),
+	DT_CLK(NULL, "usbhost_48m_fck", "usbhost_48m_fck"),
+	DT_CLK(NULL, "usbhost_ick", "usbhost_ick"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk am35xx_clks[] = {
+	DT_CLK(NULL, "ipss_ick", "ipss_ick"),
+	DT_CLK(NULL, "rmii_ck", "rmii_ck"),
+	DT_CLK(NULL, "pclk_ck", "pclk_ck"),
+	DT_CLK(NULL, "emac_ick", "emac_ick"),
+	DT_CLK(NULL, "emac_fck", "emac_fck"),
+	DT_CLK("davinci_emac.0", NULL, "emac_ick"),
+	DT_CLK("davinci_mdio.0", NULL, "emac_fck"),
+	DT_CLK("vpfe-capture", "master", "vpfe_ick"),
+	DT_CLK("vpfe-capture", "slave", "vpfe_fck"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_am35xx"),
+	DT_CLK(NULL, "hsotgusb_fck", "hsotgusb_fck_am35xx"),
+	DT_CLK(NULL, "hecc_ck", "hecc_ck"),
+	DT_CLK(NULL, "uart4_ick", "uart4_ick_am35xx"),
+	DT_CLK(NULL, "uart4_fck", "uart4_fck_am35xx"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_clks[] = {
+	DT_CLK(NULL, "omap_192m_alwon_fck", "omap_192m_alwon_fck"),
+	DT_CLK(NULL, "uart4_fck", "uart4_fck"),
+	{ .node_name = NULL },
+};
+
+static const char *enable_init_clks[] = {
+	"sdrc_ick",
+	"gpmc_fck",
+	"omapctrl_ick",
+};
+
+enum {
+	OMAP3_SOC_AM35XX,
+	OMAP3_SOC_OMAP3430_ES1,
+	OMAP3_SOC_OMAP3430_ES2_PLUS,
+	OMAP3_SOC_OMAP3630,
+	OMAP3_SOC_TI81XX,
+};
+
+static int __init omap3xxx_dt_clk_init(int soc_type)
+{
+	if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES1 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
+		ti_dt_clocks_register(omap3xxx_clks);
+
+	if (soc_type == OMAP3_SOC_AM35XX)
+		ti_dt_clocks_register(am35xx_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3630 || soc_type == OMAP3_SOC_AM35XX ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
+		ti_dt_clocks_register(omap36xx_am35xx_omap3430es2plus_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES1)
+		ti_dt_clocks_register(omap3430es1_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
+	    soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap36xx_omap3430es2plus_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES1 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
+	    soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap34xx_omap36xx_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap36xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	omap2_clk_enable_init_clocks(enable_init_clks,
+				     ARRAY_SIZE(enable_init_clks));
+
+	pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 1000000),
+		(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 100000) % 10,
+		(clk_get_rate(clk_get_sys(NULL, "core_ck")) / 1000000),
+		(clk_get_rate(clk_get_sys(NULL, "arm_fck")) / 1000000));
+
+	if (soc_type != OMAP3_SOC_TI81XX && soc_type != OMAP3_SOC_OMAP3430_ES1)
+		omap3_clk_lock_dpll5();
+
+	return 0;
+}
+
+int __init omap3430_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3430_ES2_PLUS);
+}
+
+int __init omap3630_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3630);
+}
+
+int __init am35xx_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_AM35XX);
+}
+
+int __init ti81xx_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_TI81XX);
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 45d9d52..f134997 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -232,6 +232,7 @@ int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 int omap2_dflt_clk_enable(struct clk_hw *hw);
 void omap2_dflt_clk_disable(struct clk_hw *hw);
 int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap3_clk_lock_dpll5(void);
 
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -240,6 +241,10 @@ void ti_dt_clockdomains_setup(void);
 int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
+int omap3430_dt_clk_init(void);
+int omap3630_dt_clk_init(void);
+int am35xx_dt_clk_init(void);
+int ti81xx_dt_clk_init(void);
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
-- 
1.7.9.5

[PATCHv10 20/41] CLK: TI: add am43xx clock init file

[Tero Kristo]

clk-43xx.c now contains the clock init functionality for am43xx, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/Makefile   |    2 +-
 drivers/clk/ti/clk-43xx.c |  118 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h    |    1 +
 3 files changed, 120 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-43xx.c

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index ab386c8..007c3c2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o mux.o apll.o
+					   composite.o mux.o apll.o clk-43xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= interface.o clk-3xxx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
new file mode 100644
index 0000000..67c8de5
--- /dev/null
+++ b/drivers/clk/ti/clk-43xx.c
@@ -0,0 +1,118 @@
+/*
+ * AM43XX Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+static struct ti_dt_clk am43xx_clks[] = {
+	DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
+	DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_24000000_ck", "virt_24000000_ck"),
+	DT_CLK(NULL, "virt_25000000_ck", "virt_25000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tclkin_ck", "tclkin_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m4_ck", "dpll_core_m4_ck"),
+	DT_CLK(NULL, "dpll_core_m5_ck", "dpll_core_m5_ck"),
+	DT_CLK(NULL, "dpll_core_m6_ck", "dpll_core_m6_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "dpll_disp_ck", "dpll_disp_ck"),
+	DT_CLK(NULL, "dpll_disp_m2_ck", "dpll_disp_m2_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", "dpll_per_m2_div4_wkupdm_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_ck", "dpll_per_m2_div4_ck"),
+	DT_CLK(NULL, "adc_tsc_fck", "adc_tsc_fck"),
+	DT_CLK(NULL, "clkdiv32k_ck", "clkdiv32k_ck"),
+	DT_CLK(NULL, "clkdiv32k_ick", "clkdiv32k_ick"),
+	DT_CLK(NULL, "dcan0_fck", "dcan0_fck"),
+	DT_CLK(NULL, "dcan1_fck", "dcan1_fck"),
+	DT_CLK(NULL, "pruss_ocp_gclk", "pruss_ocp_gclk"),
+	DT_CLK(NULL, "mcasp0_fck", "mcasp0_fck"),
+	DT_CLK(NULL, "mcasp1_fck", "mcasp1_fck"),
+	DT_CLK(NULL, "smartreflex0_fck", "smartreflex0_fck"),
+	DT_CLK(NULL, "smartreflex1_fck", "smartreflex1_fck"),
+	DT_CLK(NULL, "sha0_fck", "sha0_fck"),
+	DT_CLK(NULL, "aes0_fck", "aes0_fck"),
+	DT_CLK(NULL, "timer1_fck", "timer1_fck"),
+	DT_CLK(NULL, "timer2_fck", "timer2_fck"),
+	DT_CLK(NULL, "timer3_fck", "timer3_fck"),
+	DT_CLK(NULL, "timer4_fck", "timer4_fck"),
+	DT_CLK(NULL, "timer5_fck", "timer5_fck"),
+	DT_CLK(NULL, "timer6_fck", "timer6_fck"),
+	DT_CLK(NULL, "timer7_fck", "timer7_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "l3_gclk", "l3_gclk"),
+	DT_CLK(NULL, "dpll_core_m4_div2_ck", "dpll_core_m4_div2_ck"),
+	DT_CLK(NULL, "l4hs_gclk", "l4hs_gclk"),
+	DT_CLK(NULL, "l3s_gclk", "l3s_gclk"),
+	DT_CLK(NULL, "l4ls_gclk", "l4ls_gclk"),
+	DT_CLK(NULL, "clk_24mhz", "clk_24mhz"),
+	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
+	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
+	DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"),
+	DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "mmc_clk", "mmc_clk"),
+	DT_CLK(NULL, "gfx_fclk_clksel_ck", "gfx_fclk_clksel_ck"),
+	DT_CLK(NULL, "gfx_fck_div_ck", "gfx_fck_div_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "sysclk_div", "sysclk_div"),
+	DT_CLK(NULL, "disp_clk", "disp_clk"),
+	DT_CLK(NULL, "clk_32k_mosc_ck", "clk_32k_mosc_ck"),
+	DT_CLK(NULL, "clk_32k_tpm_ck", "clk_32k_tpm_ck"),
+	DT_CLK(NULL, "dpll_extdev_ck", "dpll_extdev_ck"),
+	DT_CLK(NULL, "dpll_extdev_m2_ck", "dpll_extdev_m2_ck"),
+	DT_CLK(NULL, "mux_synctimer32k_ck", "mux_synctimer32k_ck"),
+	DT_CLK(NULL, "synctimer_32kclk", "synctimer_32kclk"),
+	DT_CLK(NULL, "timer8_fck", "timer8_fck"),
+	DT_CLK(NULL, "timer9_fck", "timer9_fck"),
+	DT_CLK(NULL, "timer10_fck", "timer10_fck"),
+	DT_CLK(NULL, "timer11_fck", "timer11_fck"),
+	DT_CLK(NULL, "cpsw_50m_clkdiv", "cpsw_50m_clkdiv"),
+	DT_CLK(NULL, "cpsw_5m_clkdiv", "cpsw_5m_clkdiv"),
+	DT_CLK(NULL, "dpll_ddr_x2_ck", "dpll_ddr_x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_m4_ck", "dpll_ddr_m4_ck"),
+	DT_CLK(NULL, "dpll_per_clkdcoldo", "dpll_per_clkdcoldo"),
+	DT_CLK(NULL, "dll_aging_clk_div", "dll_aging_clk_div"),
+	DT_CLK(NULL, "div_core_25m_ck", "div_core_25m_ck"),
+	DT_CLK(NULL, "func_12m_clk", "func_12m_clk"),
+	DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"),
+	DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"),
+	{ .node_name = NULL },
+};
+
+int __init am43xx_dt_clk_init(void)
+{
+	ti_dt_clocks_register(am43xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index f134997..a284265 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -249,6 +249,7 @@ int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
 int am33xx_dt_clk_init(void);
+int am43xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 20/41] CLK: TI: add am43xx clock init file

[Tero Kristo]

clk-43xx.c now contains the clock init functionality for am43xx, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/Makefile   |    2 +-
 drivers/clk/ti/clk-43xx.c |  118 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h    |    1 +
 3 files changed, 120 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-43xx.c

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index ab386c8..007c3c2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o mux.o apll.o
+					   composite.o mux.o apll.o clk-43xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= interface.o clk-3xxx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
new file mode 100644
index 0000000..67c8de5
--- /dev/null
+++ b/drivers/clk/ti/clk-43xx.c
@@ -0,0 +1,118 @@
+/*
+ * AM43XX Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo at ti.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+static struct ti_dt_clk am43xx_clks[] = {
+	DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
+	DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_24000000_ck", "virt_24000000_ck"),
+	DT_CLK(NULL, "virt_25000000_ck", "virt_25000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tclkin_ck", "tclkin_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m4_ck", "dpll_core_m4_ck"),
+	DT_CLK(NULL, "dpll_core_m5_ck", "dpll_core_m5_ck"),
+	DT_CLK(NULL, "dpll_core_m6_ck", "dpll_core_m6_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "dpll_disp_ck", "dpll_disp_ck"),
+	DT_CLK(NULL, "dpll_disp_m2_ck", "dpll_disp_m2_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", "dpll_per_m2_div4_wkupdm_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_ck", "dpll_per_m2_div4_ck"),
+	DT_CLK(NULL, "adc_tsc_fck", "adc_tsc_fck"),
+	DT_CLK(NULL, "clkdiv32k_ck", "clkdiv32k_ck"),
+	DT_CLK(NULL, "clkdiv32k_ick", "clkdiv32k_ick"),
+	DT_CLK(NULL, "dcan0_fck", "dcan0_fck"),
+	DT_CLK(NULL, "dcan1_fck", "dcan1_fck"),
+	DT_CLK(NULL, "pruss_ocp_gclk", "pruss_ocp_gclk"),
+	DT_CLK(NULL, "mcasp0_fck", "mcasp0_fck"),
+	DT_CLK(NULL, "mcasp1_fck", "mcasp1_fck"),
+	DT_CLK(NULL, "smartreflex0_fck", "smartreflex0_fck"),
+	DT_CLK(NULL, "smartreflex1_fck", "smartreflex1_fck"),
+	DT_CLK(NULL, "sha0_fck", "sha0_fck"),
+	DT_CLK(NULL, "aes0_fck", "aes0_fck"),
+	DT_CLK(NULL, "timer1_fck", "timer1_fck"),
+	DT_CLK(NULL, "timer2_fck", "timer2_fck"),
+	DT_CLK(NULL, "timer3_fck", "timer3_fck"),
+	DT_CLK(NULL, "timer4_fck", "timer4_fck"),
+	DT_CLK(NULL, "timer5_fck", "timer5_fck"),
+	DT_CLK(NULL, "timer6_fck", "timer6_fck"),
+	DT_CLK(NULL, "timer7_fck", "timer7_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "l3_gclk", "l3_gclk"),
+	DT_CLK(NULL, "dpll_core_m4_div2_ck", "dpll_core_m4_div2_ck"),
+	DT_CLK(NULL, "l4hs_gclk", "l4hs_gclk"),
+	DT_CLK(NULL, "l3s_gclk", "l3s_gclk"),
+	DT_CLK(NULL, "l4ls_gclk", "l4ls_gclk"),
+	DT_CLK(NULL, "clk_24mhz", "clk_24mhz"),
+	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
+	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
+	DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"),
+	DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "mmc_clk", "mmc_clk"),
+	DT_CLK(NULL, "gfx_fclk_clksel_ck", "gfx_fclk_clksel_ck"),
+	DT_CLK(NULL, "gfx_fck_div_ck", "gfx_fck_div_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "sysclk_div", "sysclk_div"),
+	DT_CLK(NULL, "disp_clk", "disp_clk"),
+	DT_CLK(NULL, "clk_32k_mosc_ck", "clk_32k_mosc_ck"),
+	DT_CLK(NULL, "clk_32k_tpm_ck", "clk_32k_tpm_ck"),
+	DT_CLK(NULL, "dpll_extdev_ck", "dpll_extdev_ck"),
+	DT_CLK(NULL, "dpll_extdev_m2_ck", "dpll_extdev_m2_ck"),
+	DT_CLK(NULL, "mux_synctimer32k_ck", "mux_synctimer32k_ck"),
+	DT_CLK(NULL, "synctimer_32kclk", "synctimer_32kclk"),
+	DT_CLK(NULL, "timer8_fck", "timer8_fck"),
+	DT_CLK(NULL, "timer9_fck", "timer9_fck"),
+	DT_CLK(NULL, "timer10_fck", "timer10_fck"),
+	DT_CLK(NULL, "timer11_fck", "timer11_fck"),
+	DT_CLK(NULL, "cpsw_50m_clkdiv", "cpsw_50m_clkdiv"),
+	DT_CLK(NULL, "cpsw_5m_clkdiv", "cpsw_5m_clkdiv"),
+	DT_CLK(NULL, "dpll_ddr_x2_ck", "dpll_ddr_x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_m4_ck", "dpll_ddr_m4_ck"),
+	DT_CLK(NULL, "dpll_per_clkdcoldo", "dpll_per_clkdcoldo"),
+	DT_CLK(NULL, "dll_aging_clk_div", "dll_aging_clk_div"),
+	DT_CLK(NULL, "div_core_25m_ck", "div_core_25m_ck"),
+	DT_CLK(NULL, "func_12m_clk", "func_12m_clk"),
+	DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"),
+	DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"),
+	{ .node_name = NULL },
+};
+
+int __init am43xx_dt_clk_init(void)
+{
+	ti_dt_clocks_register(am43xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index f134997..a284265 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -249,6 +249,7 @@ int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
 int am33xx_dt_clk_init(void);
+int am43xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 21/41] ARM: dts: omap4 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP4 power,
reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
different clock tree which is taken into account in the data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/omap4.dtsi           |   30 +
 arch/arm/boot/dts/omap443x-clocks.dtsi |   18 +
 arch/arm/boot/dts/omap443x.dtsi        |    2 +
 arch/arm/boot/dts/omap4460.dtsi        |    2 +
 arch/arm/boot/dts/omap446x-clocks.dtsi |   27 +
 arch/arm/boot/dts/omap44xx-clocks.dtsi | 1645 ++++++++++++++++++++++++++++++++
 6 files changed, 1724 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap443x-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap446x-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap44xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index a1e0585..c2e3993 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -107,6 +107,34 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		cm1: cm1@4a004000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a004000 0x2000>;
+		};
+
+		prm: prm@4a306000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a306000 0x3000>;
+		};
+
+		cm2: cm2@4a008000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a008000 0x3000>;
+		};
+
+		scrm: scrm@4a30a000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a30a000 0x2000>;
+		};
+
 		counter32k: counter@4a304000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4a304000 0x20>;
@@ -707,3 +735,5 @@
 		};
 	};
 };
+
+/include/ "omap44xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
new file mode 100644
index 0000000..643755b
--- /dev/null
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm {
+	bandgap_fclk: bandgap_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index bcf455e..f67e191 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -31,3 +31,5 @@
 		compatible = "ti,omap4430-bandgap";
 	};
 };
+
+/include/ "omap443x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index c2f0f39..1758601 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -39,3 +39,5 @@
 		gpios = <&gpio3 22 0>; /* tshut */
 	};
 };
+
+/include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
new file mode 100644
index 0000000..d5ba999
--- /dev/null
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm {
+	div_ts_ck: div_ts_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	bandgap_ts_fclk: bandgap_ts_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&div_ts_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
new file mode 100644
index 0000000..2b59d54
--- /dev/null
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -0,0 +1,1645 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm1 {
+	extalt_clkin_ck: extalt_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <59000000>;
+	};
+
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	tie_low_clock_ck: tie_low_clock_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60motg_ck: xclk60motg_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+		reg = <0x01f0>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m6x2_ck: dpll_core_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ddrphy_ck: ddrphy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_m5x2_ck: dpll_core_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	div_core_ck: div_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	div_iva_hs_clk: div_iva_hs_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x01dc>;
+		ti,index-power-of-two;
+	};
+
+	div_mpu_hs_clk: div_mpu_hs_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	dpll_core_m4x2_ck: dpll_core_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_clk_div_ck: dll_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0134>;
+	};
+
+	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
+	};
+
+	dpll_core_m7x2_ck: dpll_core_m7x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_hs_clk_div_ck: per_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_div_ck: l3_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&div_core_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	l4_div_ck: l4_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	lp_clk_div_ck: lp_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ocp_abe_iclk: ocp_abe_iclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	per_abe_24m_fclk: per_abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dmic_sync_mux_ck: dmic_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0538>;
+	};
+
+	func_dmic_abe_gfclk: func_dmic_abe_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0538>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0540>;
+	};
+
+	func_mcasp_abe_gfclk: func_mcasp_abe_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0548>;
+	};
+
+	func_mcbsp1_gfclk: func_mcbsp1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0548>;
+	};
+
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0550>;
+	};
+
+	func_mcbsp2_gfclk: func_mcbsp2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0558>;
+	};
+
+	func_mcbsp3_gfclk: func_mcbsp3_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	slimbus1_fclk_1: slimbus1_fclk_1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_24m_clk>;
+		ti,bit-shift = <9>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_fclk_0: slimbus1_fclk_0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&abe_24m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_fclk_2: slimbus1_fclk_2 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	timer5_sync_mux: timer5_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer6_sync_mux: timer6_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	timer7_sync_mux: timer7_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0578>;
+	};
+
+	timer8_sync_mux: timer8_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	dbgclk_mux_ck: dbgclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
+		reg = <0x0108>;
+	};
+
+	syc_clk_div_ck: syc_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dmt1_clk_mux: dmt1_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	usim_ck: usim_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+		ti,dividers = <14>, <18>;
+	};
+
+	usim_fclk: usim_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usim_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1858>;
+	};
+
+	pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x1a20>;
+	};
+
+	pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x1a20>;
+	};
+
+	stm_clk_div_ck: stm_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&pmd_stm_clock_mux_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <64>;
+		reg = <0x1a20>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_div_ck: trace_clk_div_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,bit-shift = <24>;
+		ti,max-div = <64>;
+		reg = <0x1a20>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&trace_clk_div_div_ck>;
+	};
+
+	emu_sys_clkdm: emu_sys_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&trace_clk_div_ck>;
+	};
+};
+&cm2 {
+	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+		reg = <0x0150>;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0154>;
+	};
+
+	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
+	};
+
+	dpll_per_m4x2_ck: dpll_per_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m5x2_ck: dpll_per_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m6x2_ck: dpll_per_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m7x2_ck: dpll_per_m7x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ducati_clk_mux_ck: ducati_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
+		reg = <0x0100>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_24mc_fclk: func_24mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <4>, <8>;
+	};
+
+	func_48mc_fclk: func_48mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_64m_fclk: func_64m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	init_60m_fclk: init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	per_abe_nc_fclk: per_abe_nc_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		reg = <0x0108>;
+		ti,max-div = <2>;
+	};
+
+	aes1_fck: aes1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15a0>;
+	};
+
+	aes2_fck: aes2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15a8>;
+	};
+
+	dss_sys_clk: dss_sys_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&syc_clk_div_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_tv_clk: dss_tv_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&extalt_clkin_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m5x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+		ti,set-rate-parent;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	dss_fck: dss_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1120>;
+	};
+
+	fdif_fck: fdif_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <4>;
+		reg = <0x1028>;
+		ti,index-power-of-two;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1460>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1468>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1470>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1478>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1480>;
+	};
+
+	sgx_clk_mux: sgx_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+	};
+
+	hsi_fck: hsi_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <4>;
+		reg = <0x1338>;
+		ti,index-power-of-two;
+	};
+
+	iss_ctrlclk: iss_ctrlclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1020>;
+	};
+
+	mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>;
+		ti,bit-shift = <25>;
+		reg = <0x14e0>;
+	};
+
+	per_mcbsp4_gfclk: per_mcbsp4_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x14e0>;
+	};
+
+	hsmmc1_fclk: hsmmc1_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	hsmmc2_fclk: hsmmc2_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x13e0>;
+	};
+
+	sha2md5_fck: sha2md5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15c8>;
+	};
+
+	slimbus2_fclk_1: slimbus2_fclk_1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_abe_24m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1538>;
+	};
+
+	slimbus2_fclk_0: slimbus2_fclk_0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_24mc_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1538>;
+	};
+
+	slimbus2_slimbus_clk: slimbus2_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_slimbus_core_clks_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1538>;
+	};
+
+	smartreflex_core_fck: smartreflex_core_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0638>;
+	};
+
+	smartreflex_iva_fck: smartreflex_iva_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0630>;
+	};
+
+	smartreflex_mpu_fck: smartreflex_mpu_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0628>;
+	};
+
+	cm2_dm10_mux: cm2_dm10_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1428>;
+	};
+
+	cm2_dm11_mux: cm2_dm11_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1430>;
+	};
+
+	cm2_dm2_mux: cm2_dm2_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1438>;
+	};
+
+	cm2_dm3_mux: cm2_dm3_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1440>;
+	};
+
+	cm2_dm4_mux: cm2_dm4_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1448>;
+	};
+
+	cm2_dm9_mux: cm2_dm9_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1450>;
+	};
+
+	usb_host_fs_fck: usb_host_fs_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <1>;
+		reg = <0x13d0>;
+	};
+
+	utmi_p1_gfclk: utmi_p1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p1_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1358>;
+	};
+
+	utmi_p2_gfclk: utmi_p2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p2_gfclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <11>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <12>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_func48mclk: usb_host_hs_func48mclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <15>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_fck: usb_host_hs_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <1>;
+		reg = <0x1358>;
+	};
+
+	otg_60m_gfclk: otg_60m_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1360>;
+	};
+
+	usb_otg_hs_xclk: usb_otg_hs_xclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&otg_60m_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1360>;
+	};
+
+	usb_otg_hs_ick: usb_otg_hs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x1360>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_ick: usb_tll_hs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_div_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x1368>;
+	};
+
+	l3_init_clkdm: l3_init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>, <&usb_host_fs_fck>;
+	};
+};
+&scrm {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclk5_src_gate_ck: auxclk5_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_mux_ck: auxclk5_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_ck: auxclk5_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
+	};
+
+	auxclk5_ck: auxclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk5_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0324>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	auxclkreq4_ck: auxclkreq4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0220>;
+	};
+
+	auxclkreq5_ck: auxclkreq5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0224>;
+	};
+};
-- 
1.7.9.5

[PATCHv10 21/41] ARM: dts: omap4 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP4 power,
reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
different clock tree which is taken into account in the data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/omap4.dtsi           |   30 +
 arch/arm/boot/dts/omap443x-clocks.dtsi |   18 +
 arch/arm/boot/dts/omap443x.dtsi        |    2 +
 arch/arm/boot/dts/omap4460.dtsi        |    2 +
 arch/arm/boot/dts/omap446x-clocks.dtsi |   27 +
 arch/arm/boot/dts/omap44xx-clocks.dtsi | 1645 ++++++++++++++++++++++++++++++++
 6 files changed, 1724 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap443x-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap446x-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap44xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index a1e0585..c2e3993 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -107,6 +107,34 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		cm1: cm1 at 4a004000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a004000 0x2000>;
+		};
+
+		prm: prm at 4a306000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a306000 0x3000>;
+		};
+
+		cm2: cm2 at 4a008000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a008000 0x3000>;
+		};
+
+		scrm: scrm at 4a30a000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a30a000 0x2000>;
+		};
+
 		counter32k: counter at 4a304000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4a304000 0x20>;
@@ -707,3 +735,5 @@
 		};
 	};
 };
+
+/include/ "omap44xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
new file mode 100644
index 0000000..643755b
--- /dev/null
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm {
+	bandgap_fclk: bandgap_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index bcf455e..f67e191 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -31,3 +31,5 @@
 		compatible = "ti,omap4430-bandgap";
 	};
 };
+
+/include/ "omap443x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index c2f0f39..1758601 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -39,3 +39,5 @@
 		gpios = <&gpio3 22 0>; /* tshut */
 	};
 };
+
+/include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
new file mode 100644
index 0000000..d5ba999
--- /dev/null
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm {
+	div_ts_ck: div_ts_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	bandgap_ts_fclk: bandgap_ts_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&div_ts_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
new file mode 100644
index 0000000..2b59d54
--- /dev/null
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -0,0 +1,1645 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm1 {
+	extalt_clkin_ck: extalt_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <59000000>;
+	};
+
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	tie_low_clock_ck: tie_low_clock_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60motg_ck: xclk60motg_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+		reg = <0x01f0>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m6x2_ck: dpll_core_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ddrphy_ck: ddrphy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_m5x2_ck: dpll_core_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	div_core_ck: div_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	div_iva_hs_clk: div_iva_hs_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x01dc>;
+		ti,index-power-of-two;
+	};
+
+	div_mpu_hs_clk: div_mpu_hs_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	dpll_core_m4x2_ck: dpll_core_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_clk_div_ck: dll_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0134>;
+	};
+
+	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
+	};
+
+	dpll_core_m7x2_ck: dpll_core_m7x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_hs_clk_div_ck: per_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_div_ck: l3_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&div_core_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	l4_div_ck: l4_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	lp_clk_div_ck: lp_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ocp_abe_iclk: ocp_abe_iclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	per_abe_24m_fclk: per_abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dmic_sync_mux_ck: dmic_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0538>;
+	};
+
+	func_dmic_abe_gfclk: func_dmic_abe_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0538>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0540>;
+	};
+
+	func_mcasp_abe_gfclk: func_mcasp_abe_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0548>;
+	};
+
+	func_mcbsp1_gfclk: func_mcbsp1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0548>;
+	};
+
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0550>;
+	};
+
+	func_mcbsp2_gfclk: func_mcbsp2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0558>;
+	};
+
+	func_mcbsp3_gfclk: func_mcbsp3_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	slimbus1_fclk_1: slimbus1_fclk_1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_24m_clk>;
+		ti,bit-shift = <9>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_fclk_0: slimbus1_fclk_0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&abe_24m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_fclk_2: slimbus1_fclk_2 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	timer5_sync_mux: timer5_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer6_sync_mux: timer6_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	timer7_sync_mux: timer7_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0578>;
+	};
+
+	timer8_sync_mux: timer8_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	dbgclk_mux_ck: dbgclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
+		reg = <0x0108>;
+	};
+
+	syc_clk_div_ck: syc_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dmt1_clk_mux: dmt1_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	usim_ck: usim_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+		ti,dividers = <14>, <18>;
+	};
+
+	usim_fclk: usim_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usim_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1858>;
+	};
+
+	pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x1a20>;
+	};
+
+	pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x1a20>;
+	};
+
+	stm_clk_div_ck: stm_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&pmd_stm_clock_mux_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <64>;
+		reg = <0x1a20>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_div_ck: trace_clk_div_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,bit-shift = <24>;
+		ti,max-div = <64>;
+		reg = <0x1a20>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&trace_clk_div_div_ck>;
+	};
+
+	emu_sys_clkdm: emu_sys_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&trace_clk_div_ck>;
+	};
+};
+&cm2 {
+	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+		reg = <0x0150>;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0154>;
+	};
+
+	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
+	};
+
+	dpll_per_m4x2_ck: dpll_per_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m5x2_ck: dpll_per_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m6x2_ck: dpll_per_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m7x2_ck: dpll_per_m7x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ducati_clk_mux_ck: ducati_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
+		reg = <0x0100>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_24mc_fclk: func_24mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <4>, <8>;
+	};
+
+	func_48mc_fclk: func_48mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_64m_fclk: func_64m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	init_60m_fclk: init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	per_abe_nc_fclk: per_abe_nc_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		reg = <0x0108>;
+		ti,max-div = <2>;
+	};
+
+	aes1_fck: aes1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15a0>;
+	};
+
+	aes2_fck: aes2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15a8>;
+	};
+
+	dss_sys_clk: dss_sys_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&syc_clk_div_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_tv_clk: dss_tv_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&extalt_clkin_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m5x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+		ti,set-rate-parent;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	dss_fck: dss_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1120>;
+	};
+
+	fdif_fck: fdif_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <4>;
+		reg = <0x1028>;
+		ti,index-power-of-two;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1460>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1468>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1470>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1478>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1480>;
+	};
+
+	sgx_clk_mux: sgx_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+	};
+
+	hsi_fck: hsi_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <4>;
+		reg = <0x1338>;
+		ti,index-power-of-two;
+	};
+
+	iss_ctrlclk: iss_ctrlclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1020>;
+	};
+
+	mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>;
+		ti,bit-shift = <25>;
+		reg = <0x14e0>;
+	};
+
+	per_mcbsp4_gfclk: per_mcbsp4_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x14e0>;
+	};
+
+	hsmmc1_fclk: hsmmc1_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	hsmmc2_fclk: hsmmc2_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x13e0>;
+	};
+
+	sha2md5_fck: sha2md5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15c8>;
+	};
+
+	slimbus2_fclk_1: slimbus2_fclk_1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_abe_24m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1538>;
+	};
+
+	slimbus2_fclk_0: slimbus2_fclk_0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_24mc_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1538>;
+	};
+
+	slimbus2_slimbus_clk: slimbus2_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_slimbus_core_clks_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1538>;
+	};
+
+	smartreflex_core_fck: smartreflex_core_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0638>;
+	};
+
+	smartreflex_iva_fck: smartreflex_iva_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0630>;
+	};
+
+	smartreflex_mpu_fck: smartreflex_mpu_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0628>;
+	};
+
+	cm2_dm10_mux: cm2_dm10_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1428>;
+	};
+
+	cm2_dm11_mux: cm2_dm11_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1430>;
+	};
+
+	cm2_dm2_mux: cm2_dm2_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1438>;
+	};
+
+	cm2_dm3_mux: cm2_dm3_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1440>;
+	};
+
+	cm2_dm4_mux: cm2_dm4_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1448>;
+	};
+
+	cm2_dm9_mux: cm2_dm9_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1450>;
+	};
+
+	usb_host_fs_fck: usb_host_fs_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <1>;
+		reg = <0x13d0>;
+	};
+
+	utmi_p1_gfclk: utmi_p1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p1_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1358>;
+	};
+
+	utmi_p2_gfclk: utmi_p2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p2_gfclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <11>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <12>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_func48mclk: usb_host_hs_func48mclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <15>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_fck: usb_host_hs_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <1>;
+		reg = <0x1358>;
+	};
+
+	otg_60m_gfclk: otg_60m_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1360>;
+	};
+
+	usb_otg_hs_xclk: usb_otg_hs_xclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&otg_60m_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1360>;
+	};
+
+	usb_otg_hs_ick: usb_otg_hs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x1360>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_ick: usb_tll_hs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_div_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x1368>;
+	};
+
+	l3_init_clkdm: l3_init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>, <&usb_host_fs_fck>;
+	};
+};
+&scrm {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclk5_src_gate_ck: auxclk5_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_mux_ck: auxclk5_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_ck: auxclk5_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
+	};
+
+	auxclk5_ck: auxclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk5_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0324>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	auxclkreq4_ck: auxclkreq4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0220>;
+	};
+
+	auxclkreq5_ck: auxclkreq5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0224>;
+	};
+};
-- 
1.7.9.5

Re: [PATCHv10 21/41] ARM: dts: omap4 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the OMAP4 power,
> reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
> different clock tree which is taken into account in the data.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index a1e0585..c2e3993 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -107,6 +107,34 @@
>  		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>  
> +		cm1: cm1@4a004000 {
> +			compatible = "ti,clock-master";

These devices are low-level IP blocks, and should have accurate compatible 
strings like any other low-level IP block.  At some point in the future, 
these IP blocks will have device driver code that matches up with these DT 
nodes, and is probed via these compatible strings.  These should be 
corrected now, so unnecessary DT data synchronization problems don't 
appear with later kernels.

So this should be something like:

compatible = "ti,omap4-cm1";

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x4a004000 0x2000>;
> +		};
> +
> +		prm: prm@4a306000 {
> +			compatible = "ti,clock-master";

Similarly this should be 

compatible = "ti,omap4-prm";

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x4a306000 0x3000>;
> +		};
> +
> +		cm2: cm2@4a008000 {
> +			compatible = "ti,clock-master";

compatible = "ti,omap4-cm2";

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x4a008000 0x3000>;
> +		};
> +
> +		scrm: scrm@4a30a000 {
> +			compatible = "ti,clock-master";

compatible = "ti,omap4-scrm";


...

> diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
> new file mode 100644
> index 0000000..643755b
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
> @@ -0,0 +1,18 @@
> +/*
> + * Device Tree Source for OMAP4 clock data
> + *
> + * Copyright (C) 2013 Texas Instruments, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +&prm {
> +	bandgap_fclk: bandgap_fclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&sys_32k_ck>;
> +		ti,bit-shift = <8>;
> +		reg = <0x1888>;
> +	};

So we've already discussed that clocks should be moved underneath
separate "clocks {" node in the IP block data.  And similarly...

> diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
> new file mode 100644
> index 0000000..2b59d54
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi

...

> +	emu_sys_clkdm: emu_sys_clkdm {
> +		compatible = "ti,clockdomain";
> +		clocks = <&trace_clk_div_ck>;
> +	};

... all of the clockdomains should be moved underneath "clockdomains {"
nodes in the IP block DT data.


- Paul

[PATCHv10 21/41] ARM: dts: omap4 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the OMAP4 power,
> reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
> different clock tree which is taken into account in the data.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index a1e0585..c2e3993 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -107,6 +107,34 @@
>  		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>  
> +		cm1: cm1 at 4a004000 {
> +			compatible = "ti,clock-master";

These devices are low-level IP blocks, and should have accurate compatible 
strings like any other low-level IP block.  At some point in the future, 
these IP blocks will have device driver code that matches up with these DT 
nodes, and is probed via these compatible strings.  These should be 
corrected now, so unnecessary DT data synchronization problems don't 
appear with later kernels.

So this should be something like:

compatible = "ti,omap4-cm1";

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x4a004000 0x2000>;
> +		};
> +
> +		prm: prm at 4a306000 {
> +			compatible = "ti,clock-master";

Similarly this should be 

compatible = "ti,omap4-prm";

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x4a306000 0x3000>;
> +		};
> +
> +		cm2: cm2 at 4a008000 {
> +			compatible = "ti,clock-master";

compatible = "ti,omap4-cm2";

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x4a008000 0x3000>;
> +		};
> +
> +		scrm: scrm at 4a30a000 {
> +			compatible = "ti,clock-master";

compatible = "ti,omap4-scrm";


...

> diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
> new file mode 100644
> index 0000000..643755b
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
> @@ -0,0 +1,18 @@
> +/*
> + * Device Tree Source for OMAP4 clock data
> + *
> + * Copyright (C) 2013 Texas Instruments, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +&prm {
> +	bandgap_fclk: bandgap_fclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&sys_32k_ck>;
> +		ti,bit-shift = <8>;
> +		reg = <0x1888>;
> +	};

So we've already discussed that clocks should be moved underneath
separate "clocks {" node in the IP block data.  And similarly...

> diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
> new file mode 100644
> index 0000000..2b59d54
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi

...

> +	emu_sys_clkdm: emu_sys_clkdm {
> +		compatible = "ti,clockdomain";
> +		clocks = <&trace_clk_div_ck>;
> +	};

... all of the clockdomains should be moved underneath "clockdomains {"
nodes in the IP block DT data.


- Paul

Re: [PATCHv10 21/41] ARM: dts: omap4 clock data

[Tero Kristo]

On 12/17/2013 11:44 AM, Paul Walmsley wrote:
> On Tue, 26 Nov 2013, Tero Kristo wrote:
>
>> This patch creates a unique node for each clock in the OMAP4 power,
>> reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
>> different clock tree which is taken into account in the data.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>
> ...
>
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index a1e0585..c2e3993 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -107,6 +107,34 @@
>>   		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
>>   			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>
>> +		cm1: cm1@4a004000 {
>> +			compatible = "ti,clock-master";
>
> These devices are low-level IP blocks, and should have accurate compatible
> strings like any other low-level IP block.  At some point in the future,
> these IP blocks will have device driver code that matches up with these DT
> nodes, and is probed via these compatible strings.  These should be
> corrected now, so unnecessary DT data synchronization problems don't
> appear with later kernels.
>
> So this should be something like:
>
> compatible = "ti,omap4-cm1";
>
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x4a004000 0x2000>;
>> +		};
>> +
>> +		prm: prm@4a306000 {
>> +			compatible = "ti,clock-master";
>
> Similarly this should be
>
> compatible = "ti,omap4-prm";

How about just adding dual compatible strings? Keep the current one and 
add the other as extra.

	compatible = "ti,clock-master", "ti,omap4-prm";

Easier to handle it this way.

>
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x4a306000 0x3000>;
>> +		};
>> +
>> +		cm2: cm2@4a008000 {
>> +			compatible = "ti,clock-master";
>
> compatible = "ti,omap4-cm2";
>
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x4a008000 0x3000>;
>> +		};
>> +
>> +		scrm: scrm@4a30a000 {
>> +			compatible = "ti,clock-master";
>
> compatible = "ti,omap4-scrm";
>
>
> ...
>
>> diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
>> new file mode 100644
>> index 0000000..643755b
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
>> @@ -0,0 +1,18 @@
>> +/*
>> + * Device Tree Source for OMAP4 clock data
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +&prm {
>> +	bandgap_fclk: bandgap_fclk {
>> +		#clock-cells = <0>;
>> +		compatible = "ti,gate-clock";
>> +		clocks = <&sys_32k_ck>;
>> +		ti,bit-shift = <8>;
>> +		reg = <0x1888>;
>> +	};
>
> So we've already discussed that clocks should be moved underneath
> separate "clocks {" node in the IP block data.  And similarly...

Yeah, I have actually wip v11 which has this done. I ended up creating 
this though:

...
    prm {
       prm_clocks: clocks {

       };
    };

... and references like:

&prm_clocks {

};

It seems the references to existing clocks {} nodes is impossible 
otherwise as I need to add some extra clocks to these.

>
>> diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
>> new file mode 100644
>> index 0000000..2b59d54
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
>
> ...
>
>> +	emu_sys_clkdm: emu_sys_clkdm {
>> +		compatible = "ti,clockdomain";
>> +		clocks = <&trace_clk_div_ck>;
>> +	};
>
> ... all of the clockdomains should be moved underneath "clockdomains {"
> nodes in the IP block DT data.

Ok that can be done.

>
>
> - Paul
>

[PATCHv10 21/41] ARM: dts: omap4 clock data

[Tero Kristo]

On 12/17/2013 11:44 AM, Paul Walmsley wrote:
> On Tue, 26 Nov 2013, Tero Kristo wrote:
>
>> This patch creates a unique node for each clock in the OMAP4 power,
>> reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
>> different clock tree which is taken into account in the data.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>
> ...
>
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index a1e0585..c2e3993 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -107,6 +107,34 @@
>>   		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
>>   			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>
>> +		cm1: cm1 at 4a004000 {
>> +			compatible = "ti,clock-master";
>
> These devices are low-level IP blocks, and should have accurate compatible
> strings like any other low-level IP block.  At some point in the future,
> these IP blocks will have device driver code that matches up with these DT
> nodes, and is probed via these compatible strings.  These should be
> corrected now, so unnecessary DT data synchronization problems don't
> appear with later kernels.
>
> So this should be something like:
>
> compatible = "ti,omap4-cm1";
>
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x4a004000 0x2000>;
>> +		};
>> +
>> +		prm: prm at 4a306000 {
>> +			compatible = "ti,clock-master";
>
> Similarly this should be
>
> compatible = "ti,omap4-prm";

How about just adding dual compatible strings? Keep the current one and 
add the other as extra.

	compatible = "ti,clock-master", "ti,omap4-prm";

Easier to handle it this way.

>
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x4a306000 0x3000>;
>> +		};
>> +
>> +		cm2: cm2 at 4a008000 {
>> +			compatible = "ti,clock-master";
>
> compatible = "ti,omap4-cm2";
>
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0x4a008000 0x3000>;
>> +		};
>> +
>> +		scrm: scrm at 4a30a000 {
>> +			compatible = "ti,clock-master";
>
> compatible = "ti,omap4-scrm";
>
>
> ...
>
>> diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
>> new file mode 100644
>> index 0000000..643755b
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
>> @@ -0,0 +1,18 @@
>> +/*
>> + * Device Tree Source for OMAP4 clock data
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +&prm {
>> +	bandgap_fclk: bandgap_fclk {
>> +		#clock-cells = <0>;
>> +		compatible = "ti,gate-clock";
>> +		clocks = <&sys_32k_ck>;
>> +		ti,bit-shift = <8>;
>> +		reg = <0x1888>;
>> +	};
>
> So we've already discussed that clocks should be moved underneath
> separate "clocks {" node in the IP block data.  And similarly...

Yeah, I have actually wip v11 which has this done. I ended up creating 
this though:

...
    prm {
       prm_clocks: clocks {

       };
    };

... and references like:

&prm_clocks {

};

It seems the references to existing clocks {} nodes is impossible 
otherwise as I need to add some extra clocks to these.

>
>> diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
>> new file mode 100644
>> index 0000000..2b59d54
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
>
> ...
>
>> +	emu_sys_clkdm: emu_sys_clkdm {
>> +		compatible = "ti,clockdomain";
>> +		clocks = <&trace_clk_div_ck>;
>> +	};
>
> ... all of the clockdomains should be moved underneath "clockdomains {"
> nodes in the IP block DT data.

Ok that can be done.

>
>
> - Paul
>

Re: [PATCHv10 21/41] ARM: dts: omap4 clock data

[Paul Walmsley]

On Tue, 17 Dec 2013, Tero Kristo wrote:

> On 12/17/2013 11:44 AM, Paul Walmsley wrote:
> > On Tue, 26 Nov 2013, Tero Kristo wrote:
> > 
> > > This patch creates a unique node for each clock in the OMAP4 power,
> > > reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
> > > different clock tree which is taken into account in the data.
> > > 
> > > Signed-off-by: Tero Kristo <t-kristo@ti.com>
> > 
> > ...
> > 
> > > diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> > > index a1e0585..c2e3993 100644
> > > --- a/arch/arm/boot/dts/omap4.dtsi
> > > +++ b/arch/arm/boot/dts/omap4.dtsi
> > > @@ -107,6 +107,34 @@
> > >   		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> > >   			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> > > 
> > > +		cm1: cm1@4a004000 {
> > > +			compatible = "ti,clock-master";
> > 
> > These devices are low-level IP blocks, and should have accurate compatible
> > strings like any other low-level IP block.  At some point in the future,
> > these IP blocks will have device driver code that matches up with these DT
> > nodes, and is probed via these compatible strings.  These should be
> > corrected now, so unnecessary DT data synchronization problems don't
> > appear with later kernels.
> > 
> > So this should be something like:
> > 
> > compatible = "ti,omap4-cm1";
> > 
> > > +			#address-cells = <1>;
> > > +			#size-cells = <0>;
> > > +			reg = <0x4a004000 0x2000>;
> > > +		};
> > > +
> > > +		prm: prm@4a306000 {
> > > +			compatible = "ti,clock-master";
> > 
> > Similarly this should be
> > 
> > compatible = "ti,omap4-prm";
> 
> How about just adding dual compatible strings? Keep the current one and add
> the other as extra.
> 
> 	compatible = "ti,clock-master", "ti,omap4-prm";
> 
> Easier to handle it this way.
> 
> > 
> > > +			#address-cells = <1>;
> > > +			#size-cells = <0>;
> > > +			reg = <0x4a306000 0x3000>;
> > > +		};
> > > +
> > > +		cm2: cm2@4a008000 {
> > > +			compatible = "ti,clock-master";
> > 
> > compatible = "ti,omap4-cm2";
> > 
> > > +			#address-cells = <1>;
> > > +			#size-cells = <0>;
> > > +			reg = <0x4a008000 0x3000>;
> > > +		};
> > > +
> > > +		scrm: scrm@4a30a000 {
> > > +			compatible = "ti,clock-master";
> > 
> > compatible = "ti,omap4-scrm";
> > 
> > 
> > ...
> > 
> > > diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi
> > > b/arch/arm/boot/dts/omap443x-clocks.dtsi
> > > new file mode 100644
> > > index 0000000..643755b
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
> > > @@ -0,0 +1,18 @@
> > > +/*
> > > + * Device Tree Source for OMAP4 clock data
> > > + *
> > > + * Copyright (C) 2013 Texas Instruments, Inc.
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + */
> > > +&prm {
> > > +	bandgap_fclk: bandgap_fclk {
> > > +		#clock-cells = <0>;
> > > +		compatible = "ti,gate-clock";
> > > +		clocks = <&sys_32k_ck>;
> > > +		ti,bit-shift = <8>;
> > > +		reg = <0x1888>;
> > > +	};
> > 
> > So we've already discussed that clocks should be moved underneath
> > separate "clocks {" node in the IP block data.  And similarly...
> 
> Yeah, I have actually wip v11 which has this done. I ended up creating this
> though:
> 
> ...
>    prm {
>       prm_clocks: clocks {
> 
>       };
>    };
> 
> ... and references like:
> 
> &prm_clocks {
> 
> };
> 
> It seems the references to existing clocks {} nodes is impossible otherwise as
> I need to add some extra clocks to these.
> 
> > 
> > > diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi
> > > b/arch/arm/boot/dts/omap44xx-clocks.dtsi
> > > new file mode 100644
> > > index 0000000..2b59d54
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
> > 
> > ...
> > 
> > > +	emu_sys_clkdm: emu_sys_clkdm {
> > > +		compatible = "ti,clockdomain";
> > > +		clocks = <&trace_clk_div_ck>;
> > > +	};
> > 
> > ... all of the clockdomains should be moved underneath "clockdomains {"
> > nodes in the IP block DT data.
> 
> Ok that can be done.

Thanks for making these changes; the data looks better now.


- Paul

[PATCHv10 21/41] ARM: dts: omap4 clock data

[Paul Walmsley]

On Tue, 17 Dec 2013, Tero Kristo wrote:

> On 12/17/2013 11:44 AM, Paul Walmsley wrote:
> > On Tue, 26 Nov 2013, Tero Kristo wrote:
> > 
> > > This patch creates a unique node for each clock in the OMAP4 power,
> > > reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
> > > different clock tree which is taken into account in the data.
> > > 
> > > Signed-off-by: Tero Kristo <t-kristo@ti.com>
> > 
> > ...
> > 
> > > diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> > > index a1e0585..c2e3993 100644
> > > --- a/arch/arm/boot/dts/omap4.dtsi
> > > +++ b/arch/arm/boot/dts/omap4.dtsi
> > > @@ -107,6 +107,34 @@
> > >   		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> > >   			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> > > 
> > > +		cm1: cm1 at 4a004000 {
> > > +			compatible = "ti,clock-master";
> > 
> > These devices are low-level IP blocks, and should have accurate compatible
> > strings like any other low-level IP block.  At some point in the future,
> > these IP blocks will have device driver code that matches up with these DT
> > nodes, and is probed via these compatible strings.  These should be
> > corrected now, so unnecessary DT data synchronization problems don't
> > appear with later kernels.
> > 
> > So this should be something like:
> > 
> > compatible = "ti,omap4-cm1";
> > 
> > > +			#address-cells = <1>;
> > > +			#size-cells = <0>;
> > > +			reg = <0x4a004000 0x2000>;
> > > +		};
> > > +
> > > +		prm: prm at 4a306000 {
> > > +			compatible = "ti,clock-master";
> > 
> > Similarly this should be
> > 
> > compatible = "ti,omap4-prm";
> 
> How about just adding dual compatible strings? Keep the current one and add
> the other as extra.
> 
> 	compatible = "ti,clock-master", "ti,omap4-prm";
> 
> Easier to handle it this way.
> 
> > 
> > > +			#address-cells = <1>;
> > > +			#size-cells = <0>;
> > > +			reg = <0x4a306000 0x3000>;
> > > +		};
> > > +
> > > +		cm2: cm2 at 4a008000 {
> > > +			compatible = "ti,clock-master";
> > 
> > compatible = "ti,omap4-cm2";
> > 
> > > +			#address-cells = <1>;
> > > +			#size-cells = <0>;
> > > +			reg = <0x4a008000 0x3000>;
> > > +		};
> > > +
> > > +		scrm: scrm at 4a30a000 {
> > > +			compatible = "ti,clock-master";
> > 
> > compatible = "ti,omap4-scrm";
> > 
> > 
> > ...
> > 
> > > diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi
> > > b/arch/arm/boot/dts/omap443x-clocks.dtsi
> > > new file mode 100644
> > > index 0000000..643755b
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
> > > @@ -0,0 +1,18 @@
> > > +/*
> > > + * Device Tree Source for OMAP4 clock data
> > > + *
> > > + * Copyright (C) 2013 Texas Instruments, Inc.
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + */
> > > +&prm {
> > > +	bandgap_fclk: bandgap_fclk {
> > > +		#clock-cells = <0>;
> > > +		compatible = "ti,gate-clock";
> > > +		clocks = <&sys_32k_ck>;
> > > +		ti,bit-shift = <8>;
> > > +		reg = <0x1888>;
> > > +	};
> > 
> > So we've already discussed that clocks should be moved underneath
> > separate "clocks {" node in the IP block data.  And similarly...
> 
> Yeah, I have actually wip v11 which has this done. I ended up creating this
> though:
> 
> ...
>    prm {
>       prm_clocks: clocks {
> 
>       };
>    };
> 
> ... and references like:
> 
> &prm_clocks {
> 
> };
> 
> It seems the references to existing clocks {} nodes is impossible otherwise as
> I need to add some extra clocks to these.
> 
> > 
> > > diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi
> > > b/arch/arm/boot/dts/omap44xx-clocks.dtsi
> > > new file mode 100644
> > > index 0000000..2b59d54
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
> > 
> > ...
> > 
> > > +	emu_sys_clkdm: emu_sys_clkdm {
> > > +		compatible = "ti,clockdomain";
> > > +		clocks = <&trace_clk_div_ck>;
> > > +	};
> > 
> > ... all of the clockdomains should be moved underneath "clockdomains {"
> > nodes in the IP block DT data.
> 
> Ok that can be done.

Thanks for making these changes; the data looks better now.


- Paul

[PATCHv10 23/41] ARM: dts: dra7 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the DRA7 power,
reset and clock manager (PRCM).

TODO: apll_pcie clock node is still a dummy in this version, and
proper support for the APLL should be added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi          |   23 +
 arch/arm/boot/dts/dra7xx-clocks.dtsi | 1983 ++++++++++++++++++++++++++++++++++
 2 files changed, 2006 insertions(+)
 create mode 100644 arch/arm/boot/dts/dra7xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d0df4c4..6cf1c76 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -104,6 +104,27 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		prm: prm@4ae06000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4ae06000 0x3000>;
+		};
+
+		cm_core_aon: cm_core_aon@4a005000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a005000 0x2000>;
+		};
+
+		cm_core: cm_core@4a008000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a008000 0x3000>;
+		};
+
 		counter32k: counter@4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
@@ -584,3 +605,5 @@
 		};
 	};
 };
+
+/include/ "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
new file mode 100644
index 0000000..bc4158f
--- /dev/null
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -0,0 +1,1983 @@
+/*
+ * Device Tree Source for DRA7xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon {
+	atl_clkin0_ck: atl_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atl_clkin1_ck: atl_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atl_clkin2_ck: atl_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atlclkin3_ck: atlclkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	hdmi_clkin_ck: hdmi_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlb_clkin_ck: mlb_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlbp_clkin_ck: mlbp_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	ref_clkin0_ck: ref_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin1_ck: ref_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin2_ck: ref_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin3_ck: ref_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	rmii_clk_ck: rmii_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	sdvenc_clkin_ck: sdvenc_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	sys_clkin2: sys_clkin2 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22579200>;
+	};
+
+	usb_otg_clkin_ck: usb_otg_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_clkin_ck: video1_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_m2_clkin_ck: video1_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_clkin_ck: video2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_m2_clkin_ck: video2_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dclk_div: mpu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_dsp_ck: dpll_dsp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+	};
+
+	dpll_dsp_m2_ck: dpll_dsp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0244>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_m2_ck: dpll_iva_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dclk: iva_dclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_iva_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_gpu_ck: dpll_gpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+	};
+
+	dpll_gpu_m2_ck: dpll_gpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02e8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0220>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_ck: dpll_gmac_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
+	};
+
+	dpll_gmac_m2_ck: dpll_gmac_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	video2_dclk_div: video2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_dclk_div: video1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_dclk_div: hdmi_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_eve_ck: dpll_eve_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
+	};
+
+	dpll_eve_m2_ck: dpll_eve_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_eve_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0294>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	eve_dclk_div: eve_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_eve_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0228>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_dsp_ck>;
+	};
+
+	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0248>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_gmac_ck>;
+	};
+
+	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	gmii_m_clk_div: gmii_m_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_gmac_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hdmi_clk2_div: hdmi_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_div_clk: hdmi_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_iclk_div: l3_iclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_clk2_div: video1_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_div_clk: video1_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_clk2_div: video2_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_div_clk: video2_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ipu1_gfclk_mux: ipu1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0520>;
+	};
+
+	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0550>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0560>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	uart6_gfclk_mux: uart6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm {
+	sys_clkin1: sys_clkin1 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0118>;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x0114>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x011c>;
+		ti,dividers = <8>, <16>;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		reg = <0x0178>;
+		ti,max-div = <2>;
+	};
+
+	abe_giclk_div: abe_giclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		reg = <0x0174>;
+		ti,max-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x01d8>;
+		ti,dividers = <16>, <32>;
+	};
+
+	abe_sys_clk_div: abe_sys_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0120>;
+		ti,max-div = <2>;
+	};
+
+	adc_gfclk_mux: adc_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
+		reg = <0x01dc>;
+	};
+
+	sys_clk1_dclk_div: sys_clk1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c8>;
+		ti,index-power-of-two;
+	};
+
+	sys_clk2_dclk_div: sys_clk2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin2>;
+		ti,max-div = <64>;
+		reg = <0x01cc>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_dclk_div: per_abe_x1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01bc>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gclk_div: dsp_gclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x018c>;
+		ti,index-power-of-two;
+	};
+
+	gpu_dclk: gpu_dclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01a0>;
+		ti,index-power-of-two;
+	};
+
+	emif_phy_dclk_div: emif_phy_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0190>;
+		ti,index-power-of-two;
+	};
+
+	gmac_250m_dclk_div: gmac_250m_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	l3init_480m_dclk_div: l3init_480m_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01ac>;
+		ti,index-power-of-two;
+	};
+
+	usb_otg_dclk_div: usb_otg_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&usb_otg_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0184>;
+		ti,index-power-of-two;
+	};
+
+	sata_dclk_div: sata_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c0>;
+		ti,index-power-of-two;
+	};
+
+	pcie2_dclk_div: pcie2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b8>;
+		ti,index-power-of-two;
+	};
+
+	pcie_dclk_div: pcie_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b4>;
+		ti,index-power-of-two;
+	};
+
+	emu_dclk_div: emu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x0194>;
+		ti,index-power-of-two;
+	};
+
+	secure_32k_dclk_div: secure_32k_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&secure_32k_clk_src_ck>;
+		ti,max-div = <64>;
+		reg = <0x01c4>;
+		ti,index-power-of-two;
+	};
+
+	clkoutmux0_clk_mux: clkoutmux0_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0158>;
+	};
+
+	clkoutmux1_clk_mux: clkoutmux1_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x015c>;
+	};
+
+	clkoutmux2_clk_mux: clkoutmux2_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0160>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	eve_clk: eve_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
+		reg = <0x0180>;
+	};
+
+	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01a4>;
+	};
+
+	mlb_clk: mlb_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlb_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0134>;
+		ti,index-power-of-two;
+	};
+
+	mlbp_clk: mlbp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlbp_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0130>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0138>;
+		ti,index-power-of-two;
+	};
+
+	timer_sys_clk_div: timer_sys_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0144>;
+		ti,max-div = <2>;
+	};
+
+	video1_dpll_clk_mux: video1_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01d0>;
+	};
+
+	video2_dpll_clk_mux: video2_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01d4>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dcan1_sys_clk_mux: dcan1_sys_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart10_gfclk_mux: uart10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1880>;
+	};
+};
+&cm_core {
+	dpll_pcie_ref_ck: dpll_pcie_ref_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin1>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	apll_pcie_ck: apll_pcie_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_ck>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_m2_ck: apll_pcie_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0224>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h13x2_ck: dpll_per_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+	};
+
+	dss_hdmi_clk: dss_hdmi_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&hdmi_dpll_clk_mux>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_video1_clk: dss_video1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video1_dpll_clk_mux>;
+		ti,bit-shift = <12>;
+		reg = <0x1120>;
+	};
+
+	dss_video2_clk: dss_video2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video2_dpll_clk_mux>;
+		ti,bit-shift = <13>;
+		reg = <0x1120>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1760>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1768>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1770>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1778>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1780>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1810>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1818>;
+	};
+
+	mmc1_clk32k: mmc1_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1328>;
+	};
+
+	mmc2_clk32k: mmc2_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1330>;
+	};
+
+	mmc3_clk32k: mmc3_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1820>;
+	};
+
+	mmc4_clk32k: mmc4_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1828>;
+	};
+
+	sata_ref_clk: sata_ref_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin1>;
+		ti,bit-shift = <8>;
+		reg = <0x1388>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x13f0>;
+	};
+
+	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x1340>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0688>;
+	};
+
+	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0698>;
+	};
+
+	atl_dpll_clk_mux: atl_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0c00>;
+	};
+
+	atl_gfclk_mux: atl_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
+		ti,bit-shift = <26>;
+		reg = <0x0c00>;
+	};
+
+	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x13d0>;
+		ti,dividers = <2>;
+	};
+
+	gmac_rft_clk_mux: gmac_rft_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
+		ti,bit-shift = <25>;
+		reg = <0x13d0>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x1220>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0e50>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1860>;
+	};
+
+	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1868>;
+	};
+
+	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1868>;
+	};
+
+	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1898>;
+	};
+
+	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1898>;
+	};
+
+	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1878>;
+	};
+
+	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1878>;
+	};
+
+	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1904>;
+	};
+
+	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1904>;
+	};
+
+	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1908>;
+	};
+
+	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1908>;
+	};
+
+	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <22>;
+		reg = <0x1890>;
+	};
+
+	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <24>;
+		reg = <0x1890>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	mmc1_fclk_div: mmc1_fclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1328>;
+		ti,index-power-of-two;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	mmc2_fclk_div: mmc2_fclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1330>;
+		ti,index-power-of-two;
+	};
+
+	mmc3_gfclk_mux: mmc3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1820>;
+	};
+
+	mmc3_gfclk_div: mmc3_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc3_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1820>;
+		ti,index-power-of-two;
+	};
+
+	mmc4_gfclk_mux: mmc4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1828>;
+	};
+
+	mmc4_gfclk_div: mmc4_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc4_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1828>;
+		ti,index-power-of-two;
+	};
+
+	qspi_gfclk_mux: qspi_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1838>;
+	};
+
+	qspi_gfclk_div: qspi_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&qspi_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1838>;
+		ti,index-power-of-two;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1728>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1730>;
+	};
+
+	timer13_gfclk_mux: timer13_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17c8>;
+	};
+
+	timer14_gfclk_mux: timer14_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d0>;
+	};
+
+	timer15_gfclk_mux: timer15_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d8>;
+	};
+
+	timer16_gfclk_mux: timer16_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1830>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1738>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1740>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1748>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1750>;
+	};
+
+	uart1_gfclk_mux: uart1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart2_gfclk_mux: uart2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1848>;
+	};
+
+	uart3_gfclk_mux: uart3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1850>;
+	};
+
+	uart4_gfclk_mux: uart4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+	};
+
+	uart5_gfclk_mux: uart5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1870>;
+	};
+
+	uart7_gfclk_mux: uart7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18d0>;
+	};
+
+	uart8_gfclk_mux: uart8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e0>;
+	};
+
+	uart9_gfclk_mux: uart9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e8>;
+	};
+
+	vip1_gclk_mux: vip1_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1020>;
+	};
+
+	vip2_gclk_mux: vip2_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	vip3_gclk_mux: vip3_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+
+	coreaon_clkdm: coreaon_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
-- 
1.7.9.5

[PATCHv10 23/41] ARM: dts: dra7 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the DRA7 power,
reset and clock manager (PRCM).

TODO: apll_pcie clock node is still a dummy in this version, and
proper support for the APLL should be added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi          |   23 +
 arch/arm/boot/dts/dra7xx-clocks.dtsi | 1983 ++++++++++++++++++++++++++++++++++
 2 files changed, 2006 insertions(+)
 create mode 100644 arch/arm/boot/dts/dra7xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d0df4c4..6cf1c76 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -104,6 +104,27 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		prm: prm at 4ae06000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4ae06000 0x3000>;
+		};
+
+		cm_core_aon: cm_core_aon at 4a005000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a005000 0x2000>;
+		};
+
+		cm_core: cm_core at 4a008000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a008000 0x3000>;
+		};
+
 		counter32k: counter at 4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
@@ -584,3 +605,5 @@
 		};
 	};
 };
+
+/include/ "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
new file mode 100644
index 0000000..bc4158f
--- /dev/null
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -0,0 +1,1983 @@
+/*
+ * Device Tree Source for DRA7xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon {
+	atl_clkin0_ck: atl_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atl_clkin1_ck: atl_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atl_clkin2_ck: atl_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atlclkin3_ck: atlclkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	hdmi_clkin_ck: hdmi_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlb_clkin_ck: mlb_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlbp_clkin_ck: mlbp_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	ref_clkin0_ck: ref_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin1_ck: ref_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin2_ck: ref_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin3_ck: ref_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	rmii_clk_ck: rmii_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	sdvenc_clkin_ck: sdvenc_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	sys_clkin2: sys_clkin2 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22579200>;
+	};
+
+	usb_otg_clkin_ck: usb_otg_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_clkin_ck: video1_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_m2_clkin_ck: video1_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_clkin_ck: video2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_m2_clkin_ck: video2_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dclk_div: mpu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_dsp_ck: dpll_dsp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+	};
+
+	dpll_dsp_m2_ck: dpll_dsp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0244>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_m2_ck: dpll_iva_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dclk: iva_dclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_iva_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_gpu_ck: dpll_gpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+	};
+
+	dpll_gpu_m2_ck: dpll_gpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02e8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0220>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_ck: dpll_gmac_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
+	};
+
+	dpll_gmac_m2_ck: dpll_gmac_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	video2_dclk_div: video2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_dclk_div: video1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_dclk_div: hdmi_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_eve_ck: dpll_eve_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
+	};
+
+	dpll_eve_m2_ck: dpll_eve_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_eve_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0294>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	eve_dclk_div: eve_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_eve_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0228>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_dsp_ck>;
+	};
+
+	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0248>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_gmac_ck>;
+	};
+
+	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	gmii_m_clk_div: gmii_m_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_gmac_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hdmi_clk2_div: hdmi_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_div_clk: hdmi_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_iclk_div: l3_iclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_clk2_div: video1_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_div_clk: video1_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_clk2_div: video2_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_div_clk: video2_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ipu1_gfclk_mux: ipu1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0520>;
+	};
+
+	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0550>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0560>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	uart6_gfclk_mux: uart6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm {
+	sys_clkin1: sys_clkin1 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0118>;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x0114>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x011c>;
+		ti,dividers = <8>, <16>;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		reg = <0x0178>;
+		ti,max-div = <2>;
+	};
+
+	abe_giclk_div: abe_giclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		reg = <0x0174>;
+		ti,max-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x01d8>;
+		ti,dividers = <16>, <32>;
+	};
+
+	abe_sys_clk_div: abe_sys_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0120>;
+		ti,max-div = <2>;
+	};
+
+	adc_gfclk_mux: adc_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
+		reg = <0x01dc>;
+	};
+
+	sys_clk1_dclk_div: sys_clk1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c8>;
+		ti,index-power-of-two;
+	};
+
+	sys_clk2_dclk_div: sys_clk2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin2>;
+		ti,max-div = <64>;
+		reg = <0x01cc>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_dclk_div: per_abe_x1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01bc>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gclk_div: dsp_gclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x018c>;
+		ti,index-power-of-two;
+	};
+
+	gpu_dclk: gpu_dclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01a0>;
+		ti,index-power-of-two;
+	};
+
+	emif_phy_dclk_div: emif_phy_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0190>;
+		ti,index-power-of-two;
+	};
+
+	gmac_250m_dclk_div: gmac_250m_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	l3init_480m_dclk_div: l3init_480m_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01ac>;
+		ti,index-power-of-two;
+	};
+
+	usb_otg_dclk_div: usb_otg_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&usb_otg_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0184>;
+		ti,index-power-of-two;
+	};
+
+	sata_dclk_div: sata_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c0>;
+		ti,index-power-of-two;
+	};
+
+	pcie2_dclk_div: pcie2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b8>;
+		ti,index-power-of-two;
+	};
+
+	pcie_dclk_div: pcie_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b4>;
+		ti,index-power-of-two;
+	};
+
+	emu_dclk_div: emu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x0194>;
+		ti,index-power-of-two;
+	};
+
+	secure_32k_dclk_div: secure_32k_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&secure_32k_clk_src_ck>;
+		ti,max-div = <64>;
+		reg = <0x01c4>;
+		ti,index-power-of-two;
+	};
+
+	clkoutmux0_clk_mux: clkoutmux0_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0158>;
+	};
+
+	clkoutmux1_clk_mux: clkoutmux1_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x015c>;
+	};
+
+	clkoutmux2_clk_mux: clkoutmux2_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0160>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	eve_clk: eve_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
+		reg = <0x0180>;
+	};
+
+	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01a4>;
+	};
+
+	mlb_clk: mlb_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlb_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0134>;
+		ti,index-power-of-two;
+	};
+
+	mlbp_clk: mlbp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlbp_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0130>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0138>;
+		ti,index-power-of-two;
+	};
+
+	timer_sys_clk_div: timer_sys_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0144>;
+		ti,max-div = <2>;
+	};
+
+	video1_dpll_clk_mux: video1_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01d0>;
+	};
+
+	video2_dpll_clk_mux: video2_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01d4>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dcan1_sys_clk_mux: dcan1_sys_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart10_gfclk_mux: uart10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1880>;
+	};
+};
+&cm_core {
+	dpll_pcie_ref_ck: dpll_pcie_ref_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin1>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	apll_pcie_ck: apll_pcie_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_ck>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_m2_ck: apll_pcie_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0224>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h13x2_ck: dpll_per_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+	};
+
+	dss_hdmi_clk: dss_hdmi_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&hdmi_dpll_clk_mux>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_video1_clk: dss_video1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video1_dpll_clk_mux>;
+		ti,bit-shift = <12>;
+		reg = <0x1120>;
+	};
+
+	dss_video2_clk: dss_video2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video2_dpll_clk_mux>;
+		ti,bit-shift = <13>;
+		reg = <0x1120>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1760>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1768>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1770>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1778>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1780>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1810>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1818>;
+	};
+
+	mmc1_clk32k: mmc1_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1328>;
+	};
+
+	mmc2_clk32k: mmc2_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1330>;
+	};
+
+	mmc3_clk32k: mmc3_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1820>;
+	};
+
+	mmc4_clk32k: mmc4_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1828>;
+	};
+
+	sata_ref_clk: sata_ref_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin1>;
+		ti,bit-shift = <8>;
+		reg = <0x1388>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x13f0>;
+	};
+
+	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x1340>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0688>;
+	};
+
+	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0698>;
+	};
+
+	atl_dpll_clk_mux: atl_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0c00>;
+	};
+
+	atl_gfclk_mux: atl_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
+		ti,bit-shift = <26>;
+		reg = <0x0c00>;
+	};
+
+	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x13d0>;
+		ti,dividers = <2>;
+	};
+
+	gmac_rft_clk_mux: gmac_rft_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
+		ti,bit-shift = <25>;
+		reg = <0x13d0>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x1220>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0e50>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1860>;
+	};
+
+	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1868>;
+	};
+
+	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1868>;
+	};
+
+	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1898>;
+	};
+
+	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1898>;
+	};
+
+	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1878>;
+	};
+
+	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1878>;
+	};
+
+	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1904>;
+	};
+
+	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1904>;
+	};
+
+	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1908>;
+	};
+
+	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1908>;
+	};
+
+	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <22>;
+		reg = <0x1890>;
+	};
+
+	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <24>;
+		reg = <0x1890>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	mmc1_fclk_div: mmc1_fclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1328>;
+		ti,index-power-of-two;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	mmc2_fclk_div: mmc2_fclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1330>;
+		ti,index-power-of-two;
+	};
+
+	mmc3_gfclk_mux: mmc3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1820>;
+	};
+
+	mmc3_gfclk_div: mmc3_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc3_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1820>;
+		ti,index-power-of-two;
+	};
+
+	mmc4_gfclk_mux: mmc4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1828>;
+	};
+
+	mmc4_gfclk_div: mmc4_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc4_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1828>;
+		ti,index-power-of-two;
+	};
+
+	qspi_gfclk_mux: qspi_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1838>;
+	};
+
+	qspi_gfclk_div: qspi_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&qspi_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1838>;
+		ti,index-power-of-two;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1728>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1730>;
+	};
+
+	timer13_gfclk_mux: timer13_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17c8>;
+	};
+
+	timer14_gfclk_mux: timer14_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d0>;
+	};
+
+	timer15_gfclk_mux: timer15_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d8>;
+	};
+
+	timer16_gfclk_mux: timer16_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1830>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1738>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1740>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1748>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1750>;
+	};
+
+	uart1_gfclk_mux: uart1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart2_gfclk_mux: uart2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1848>;
+	};
+
+	uart3_gfclk_mux: uart3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1850>;
+	};
+
+	uart4_gfclk_mux: uart4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+	};
+
+	uart5_gfclk_mux: uart5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1870>;
+	};
+
+	uart7_gfclk_mux: uart7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18d0>;
+	};
+
+	uart8_gfclk_mux: uart8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e0>;
+	};
+
+	uart9_gfclk_mux: uart9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e8>;
+	};
+
+	vip1_gclk_mux: vip1_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1020>;
+	};
+
+	vip2_gclk_mux: vip2_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	vip3_gclk_mux: vip3_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+
+	coreaon_clkdm: coreaon_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
-- 
1.7.9.5

Re: [PATCHv10 23/41] ARM: dts: dra7 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the DRA7 power,
> reset and clock manager (PRCM).
> 
> TODO: apll_pcie clock node is still a dummy in this version, and
> proper support for the APLL should be added.

...

> ---
>  arch/arm/boot/dts/dra7.dtsi          |   23 +
>  arch/arm/boot/dts/dra7xx-clocks.dtsi | 1983 ++++++++++++++++++++++++++++++++++
>  2 files changed, 2006 insertions(+)
>  create mode 100644 arch/arm/boot/dts/dra7xx-clocks.dtsi
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index d0df4c4..6cf1c76 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -104,6 +104,27 @@
>  		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>  
> +		prm: prm@4ae06000 {
> +			compatible = "ti,clock-master";


Likewise, same issues here with the compatible strings and
separating out the clocks and clockdomain data into separate DT
nodes, as discussed with the OMAP4 data patch.


- Paul

[PATCHv10 23/41] ARM: dts: dra7 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the DRA7 power,
> reset and clock manager (PRCM).
> 
> TODO: apll_pcie clock node is still a dummy in this version, and
> proper support for the APLL should be added.

...

> ---
>  arch/arm/boot/dts/dra7.dtsi          |   23 +
>  arch/arm/boot/dts/dra7xx-clocks.dtsi | 1983 ++++++++++++++++++++++++++++++++++
>  2 files changed, 2006 insertions(+)
>  create mode 100644 arch/arm/boot/dts/dra7xx-clocks.dtsi
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index d0df4c4..6cf1c76 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -104,6 +104,27 @@
>  		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>  
> +		prm: prm at 4ae06000 {
> +			compatible = "ti,clock-master";


Likewise, same issues here with the compatible strings and
separating out the clocks and clockdomain data into separate DT
nodes, as discussed with the OMAP4 data patch.


- Paul

[PATCHv10 24/41] ARM: dts: clk: Add apll related clocks

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

The patch adds a mux node to choose the parent of apll_pcie_ck node.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index bc4158f..2fdb904 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1150,11 +1150,19 @@
 		ti,invert-autoidle-bit;
 	};
 
+	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c 0x4>;
+		ti,bit-shift = <7>;
+	};
+
 	apll_pcie_ck: apll_pcie_ck {
 		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_ck>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+		compatible = "ti,dra7-apll-clock";
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
 	};
 
 	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
-- 
1.7.9.5

[PATCHv10 24/41] ARM: dts: clk: Add apll related clocks

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

The patch adds a mux node to choose the parent of apll_pcie_ck node.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index bc4158f..2fdb904 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1150,11 +1150,19 @@
 		ti,invert-autoidle-bit;
 	};
 
+	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux at 4ae06118 {
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c 0x4>;
+		ti,bit-shift = <7>;
+	};
+
 	apll_pcie_ck: apll_pcie_ck {
 		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_ck>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+		compatible = "ti,dra7-apll-clock";
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
 	};
 
 	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
-- 
1.7.9.5

[PATCHv10 26/41] ARM: dts: DRA7: Add PCIe related clock nodes

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

This patch adds optfclk_pciephy_clk and optfclk_pciephy_div_clk
which are used by PCIe phy. It also adds a mux clock to choose
the source of optfclk_pciephy_div_clk clock.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 7708d84..aebbc5a 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1165,6 +1165,31 @@
 		reg = <0x021c>, <0x0220>;
 	};
 
+	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+	};
+
+	optfclk_pciephy_clk: optfclk_pciephy_clk@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <9>;
+	};
+
+	optfclk_pciephy_div_clk: optfclk_pciephy_div_clk@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&optfclk_pciephy_div>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <10>;
+	};
+
 	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
-- 
1.7.9.5

[PATCHv10 26/41] ARM: dts: DRA7: Add PCIe related clock nodes

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

This patch adds optfclk_pciephy_clk and optfclk_pciephy_div_clk
which are used by PCIe phy. It also adds a mux clock to choose
the source of optfclk_pciephy_div_clk clock.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 7708d84..aebbc5a 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1165,6 +1165,31 @@
 		reg = <0x021c>, <0x0220>;
 	};
 
+	optfclk_pciephy_div: optfclk_pciephy_div at 4a00821c {
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+	};
+
+	optfclk_pciephy_clk: optfclk_pciephy_clk at 4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <9>;
+	};
+
+	optfclk_pciephy_div_clk: optfclk_pciephy_div_clk at 4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&optfclk_pciephy_div>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <10>;
+	};
+
 	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
-- 
1.7.9.5

[PATCHv10 27/41] ARM: dts: am33xx clock data

[Tero Kristo]

This patch creates a unique node for each clock in the AM33xx power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am33xx-clocks.dtsi |  662 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am33xx.dtsi        |   16 +
 2 files changed, 678 insertions(+)
 create mode 100644 arch/arm/boot/dts/am33xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
new file mode 100644
index 0000000..ccc990d
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -0,0 +1,662 @@
+/*
+ * Device Tree Source for AM33xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm0_gate_tbclk>;
+	};
+
+	ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm1_gate_tbclk>;
+	};
+
+	ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm2_gate_tbclk>;
+	};
+};
+&prcm {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0490>, <0x045c>, <0x0468>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0480>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0484>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x04d8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0488>, <0x0420>, <0x042c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0494>, <0x0434>, <0x0440>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a4>;
+		ti,index-starts-at-one;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x048c>, <0x0470>, <0x049c>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x04ac>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	cefuse_fck: cefuse_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0a20>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x014c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
+		reg = <0x0530>;
+	};
+
+	mmu_fck: mmu_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0914>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
+		reg = <0x0528>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0508>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x050c>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0510>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0518>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x051c>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0504>;
+	};
+
+	usbotg_fck: usbotg_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x047c>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ieee5000_fck: ieee5000_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x00e4>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x0538>;
+	};
+
+	l4_rtc_gclk: l4_rtc_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4fw_gclk: l4fw_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sysclk_div_ck: sysclk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
+		reg = <0x0520>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
+		reg = <0x053c>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0408>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00ac>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00b0>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00b4>;
+	};
+
+	lcd_gclk: lcd_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x0534>;
+		ti,set-rate-parent;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x052c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x052c>;
+		ti,max-div = <2>;
+	};
+
+	sysclkout_pre_ck: sysclkout_pre_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		reg = <0x0700>;
+	};
+
+	clkout2_div_ck: clkout2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x0700>;
+	};
+
+	dbg_sysclk_ck: dbg_sysclk_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0414>;
+	};
+
+	dbg_clka_ck: dbg_clka_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <30>;
+		reg = <0x0414>;
+	};
+
+	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0414>;
+	};
+
+	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0414>;
+	};
+
+	stm_clk_div_ck: stm_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&stm_pmd_clock_mux_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <64>;
+		reg = <0x0414>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&trace_pmd_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <64>;
+		reg = <0x0414>;
+		ti,index-power-of-two;
+	};
+
+	clkout2_ck: clkout2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout2_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0700>;
+	};
+
+	clk_24mhz_clkdm: clk_24mhz_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&clkdiv32k_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f6d8ffe..52c46e1 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -102,6 +102,20 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		prcm: prcm@44e00000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44e00000 0x4000>;
+		};
+
+		scrm: scrm@44e10000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44e10000 0x2000>;
+		};
+
 		intc: interrupt-controller@48200000 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -794,3 +808,5 @@
 		};
 	};
 };
+
+/include/ "am33xx-clocks.dtsi"
\ No newline at end of file
-- 
1.7.9.5

[PATCHv10 27/41] ARM: dts: am33xx clock data

[Tero Kristo]

This patch creates a unique node for each clock in the AM33xx power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am33xx-clocks.dtsi |  662 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am33xx.dtsi        |   16 +
 2 files changed, 678 insertions(+)
 create mode 100644 arch/arm/boot/dts/am33xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
new file mode 100644
index 0000000..ccc990d
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -0,0 +1,662 @@
+/*
+ * Device Tree Source for AM33xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm0_gate_tbclk>;
+	};
+
+	ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm1_gate_tbclk>;
+	};
+
+	ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm2_gate_tbclk>;
+	};
+};
+&prcm {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0490>, <0x045c>, <0x0468>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0480>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0484>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x04d8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0488>, <0x0420>, <0x042c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0494>, <0x0434>, <0x0440>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a4>;
+		ti,index-starts-at-one;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x048c>, <0x0470>, <0x049c>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x04ac>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	cefuse_fck: cefuse_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0a20>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x014c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
+		reg = <0x0530>;
+	};
+
+	mmu_fck: mmu_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0914>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
+		reg = <0x0528>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0508>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x050c>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0510>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0518>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x051c>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0504>;
+	};
+
+	usbotg_fck: usbotg_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x047c>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ieee5000_fck: ieee5000_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x00e4>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x0538>;
+	};
+
+	l4_rtc_gclk: l4_rtc_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4fw_gclk: l4fw_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sysclk_div_ck: sysclk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
+		reg = <0x0520>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
+		reg = <0x053c>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0408>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00ac>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00b0>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00b4>;
+	};
+
+	lcd_gclk: lcd_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x0534>;
+		ti,set-rate-parent;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x052c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x052c>;
+		ti,max-div = <2>;
+	};
+
+	sysclkout_pre_ck: sysclkout_pre_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		reg = <0x0700>;
+	};
+
+	clkout2_div_ck: clkout2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x0700>;
+	};
+
+	dbg_sysclk_ck: dbg_sysclk_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0414>;
+	};
+
+	dbg_clka_ck: dbg_clka_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <30>;
+		reg = <0x0414>;
+	};
+
+	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0414>;
+	};
+
+	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0414>;
+	};
+
+	stm_clk_div_ck: stm_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&stm_pmd_clock_mux_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <64>;
+		reg = <0x0414>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&trace_pmd_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <64>;
+		reg = <0x0414>;
+		ti,index-power-of-two;
+	};
+
+	clkout2_ck: clkout2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout2_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0700>;
+	};
+
+	clk_24mhz_clkdm: clk_24mhz_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&clkdiv32k_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f6d8ffe..52c46e1 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -102,6 +102,20 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		prcm: prcm at 44e00000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44e00000 0x4000>;
+		};
+
+		scrm: scrm at 44e10000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44e10000 0x2000>;
+		};
+
 		intc: interrupt-controller at 48200000 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -794,3 +808,5 @@
 		};
 	};
 };
+
+/include/ "am33xx-clocks.dtsi"
\ No newline at end of file
-- 
1.7.9.5

Re: [PATCHv10 27/41] ARM: dts: am33xx clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the AM33xx power,
> reset and clock manager (PRCM).
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> ---
>  arch/arm/boot/dts/am33xx-clocks.dtsi |  662 ++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/am33xx.dtsi        |   16 +
>  2 files changed, 678 insertions(+)
>  create mode 100644 arch/arm/boot/dts/am33xx-clocks.dtsi
> 

...

> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index f6d8ffe..52c46e1 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -102,6 +102,20 @@
>  		ranges;
>  		ti,hwmods = "l3_main";
>  
> +		prcm: prcm@44e00000 {
> +			compatible = "ti,clock-master";

Same issues here with the compatible strings and separating out the
clocks and clockdomain data into separate DT nodes, as discussed with
the OMAP4 data patch.


- Paul

[PATCHv10 27/41] ARM: dts: am33xx clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the AM33xx power,
> reset and clock manager (PRCM).
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> ---
>  arch/arm/boot/dts/am33xx-clocks.dtsi |  662 ++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/am33xx.dtsi        |   16 +
>  2 files changed, 678 insertions(+)
>  create mode 100644 arch/arm/boot/dts/am33xx-clocks.dtsi
> 

...

> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index f6d8ffe..52c46e1 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -102,6 +102,20 @@
>  		ranges;
>  		ti,hwmods = "l3_main";
>  
> +		prcm: prcm at 44e00000 {
> +			compatible = "ti,clock-master";

Same issues here with the compatible strings and separating out the
clocks and clockdomain data into separate DT nodes, as discussed with
the OMAP4 data patch.


- Paul

[PATCHv10 28/41] ARM: dts: omap3 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP3 power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am35xx-clocks.dtsi               |  126 ++
 arch/arm/boot/dts/omap3.dtsi                       |   23 +
 arch/arm/boot/dts/omap3430es1-clocks.dtsi          |  206 +++
 arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi    |  266 ++++
 arch/arm/boot/dts/omap34xx.dtsi                    |    4 +
 .../omap36xx-am35xx-omap3430es2plus-clocks.dtsi    |  240 +++
 arch/arm/boot/dts/omap36xx-clocks.dtsi             |   88 ++
 .../boot/dts/omap36xx-omap3430es2plus-clocks.dtsi  |  196 +++
 arch/arm/boot/dts/omap36xx.dtsi                    |    5 +
 arch/arm/boot/dts/omap3xxx-clocks.dtsi             | 1658 ++++++++++++++++++++
 10 files changed, 2812 insertions(+)
 create mode 100644 arch/arm/boot/dts/am35xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap3430es1-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap3xxx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
new file mode 100644
index 0000000..53e9d61
--- /dev/null
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm {
+	emac_ick: emac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <1>;
+	};
+
+	emac_fck: emac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&rmii_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <9>;
+	};
+
+	vpfe_ick: vpfe_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <2>;
+	};
+
+	vpfe_fck: vpfe_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pclk_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <10>;
+	};
+
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <0>;
+	};
+
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <8>;
+	};
+
+	hecc_ck: hecc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <3>;
+	};
+};
+&cm {
+	ipss_ick: ipss_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	rmii_ck: rmii_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	pclk_ck: pclk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	uart4_ick_am35xx: uart4_ick_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
+			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
+			 <&hecc_ck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f3a0c26..9e6ea02 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -82,6 +82,27 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		prm: prm@48306000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48306000 0x4000>;
+		};
+
+		cm: cm@48004000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48004000 0x4000>;
+		};
+
+		scrm: scrm@48002000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48002000 0x2000>;
+		};
+
 		counter32k: counter@48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -590,3 +611,5 @@
 		};
 	};
 };
+
+/include/ "omap3xxx-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
new file mode 100644
index 0000000..4c98f24
--- /dev/null
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -0,0 +1,206 @@
+/*
+ * Device Tree Source for OMAP3430 ES1 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm {
+	gfx_l3_ck: gfx_l3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	gfx_l3_fck: gfx_l3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,max-div = <7>;
+		reg = <0x0b40>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_l3_ick: gfx_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gfx_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gfx_cg1_ck: gfx_cg1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <1>;
+	};
+
+	gfx_cg2_ck: gfx_cg2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <2>;
+	};
+
+	d2d_26m_fck: d2d_26m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <3>;
+	};
+
+	fshostusb_fck: fshostusb_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <5>;
+	};
+
+	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck_3430es1: ssi_ssr_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
+	};
+
+	ssi_sst_fck_3430es1: ssi_sst_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck_3430es1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	fac_ick: fac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <8>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick_3430es1: ssi_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <5>;
+		reg = <0x0a10>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <4>;
+		ti,max-div = <1>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	dss1_alwon_fck_3430es1: dss1_alwon_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick_3430es1: dss_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
+	};
+
+	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck_3430es1>, <&dss_ick_3430es1>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&d2d_26m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick_3430es1>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
new file mode 100644
index 0000000..525a24a
--- /dev/null
+++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
@@ -0,0 +1,266 @@
+/*
+ * Device Tree Source for OMAP34XX/OMAP36XX clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm {
+	security_l4_ick2: security_l4_ick2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes1_ick: aes1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		ti,bit-shift = <3>;
+		reg = <0x0a14>;
+	};
+
+	rng_ick: rng_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <2>;
+	};
+
+	sha11_ick: sha11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <1>;
+	};
+
+	des1_ick: des1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <0>;
+	};
+
+	cam_mclk: cam_mclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0f00>;
+		ti,set-rate-parent;
+	};
+
+	cam_ick: cam_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0f10>;
+		ti,bit-shift = <0>;
+	};
+
+	csi2_96m_fck: csi2_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0f00>;
+		ti,bit-shift = <1>;
+	};
+
+	security_l3_ick: security_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pka_ick: pka_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l3_ick>;
+		reg = <0x0a14>;
+		ti,bit-shift = <4>;
+	};
+
+	icr_ick: icr_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <29>;
+	};
+
+	des2_ick: des2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <26>;
+	};
+
+	mspro_ick: mspro_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	mailboxes_ick: mailboxes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <7>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sr1_fck: sr1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <6>;
+	};
+
+	sr2_fck: sr2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <7>;
+	};
+
+	sr_l4_ick: sr_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll2_fck: dpll2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0040>;
+		ti,index-starts-at-one;
+	};
+
+	dpll2_ck: dpll2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
+		ti,low-power-stop;
+		ti,lock;
+		ti,low-power-bypass;
+	};
+
+	dpll2_m2_ck: dpll2_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0044>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_ck: iva2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll2_m2_ck>;
+		reg = <0x0000>;
+		ti,bit-shift = <0>;
+	};
+
+	modem_fck: modem_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <31>;
+	};
+
+	sad2d_ick: sad2d_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <3>;
+	};
+
+	mad2d_ick: mad2d_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <3>;
+	};
+
+	mspro_fck: mspro_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	cam_clkdm: cam_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_ick>, <&csi2_96m_fck>;
+	};
+
+	iva2_clkdm: iva2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva2_ck>;
+	};
+
+	dpll2_clkdm: dpll2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll2_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
+			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
+			 <&mspro_fck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 5355d61..d531abf 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -26,3 +26,7 @@
 		};
 	};
 };
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 0000000..1cc3c68
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm {
+	corex2_d3_fck: corex2_d3_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	corex2_d5_fck: corex2_d5_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+};
+&cm {
+	dpll5_ck: dpll5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
+		ti,low-power-stop;
+		ti,lock;
+	};
+
+	dpll5_m2_ck: dpll5_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll5_ck>;
+		ti,max-div = <31>;
+		reg = <0x0d50>;
+		ti,index-starts-at-one;
+	};
+
+	sgx_gate_fck: sgx_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0b00>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	omap_192m_alwon_fck: omap_192m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	sgx_mux_fck: sgx_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
+		reg = <0x0b40>;
+	};
+
+	sgx_fck: sgx_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
+	};
+
+	sgx_ick: sgx_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	cpefuse_fck: cpefuse_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <0>;
+	};
+
+	ts_fck: ts_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_32k_fck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <1>;
+	};
+
+	usbtll_fck: usbtll_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <2>;
+	};
+
+	usbtll_ick: usbtll_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <2>;
+	};
+
+	mmchs3_ick: mmchs3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <30>;
+	};
+
+	mmchs3_fck: mmchs3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <30>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick_3430es2: dss_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_120m_fck: usbhost_120m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x1400>;
+		ti,bit-shift = <1>;
+	};
+
+	usbhost_48m_fck: usbhost_48m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&omap_48m_fck>;
+		reg = <0x1400>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_ick: usbhost_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x1410>;
+		ti,bit-shift = <0>;
+	};
+
+	dpll5_clkdm: dpll5_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll5_ck>;
+	};
+
+	sgx_clkdm: sgx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sgx_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
+	};
+
+	usbhost_clkdm: usbhost_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
+			 <&usbhost_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
new file mode 100644
index 0000000..985f337
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Device Tree Source for OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm {
+	dpll4_ck: dpll4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-j-type-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-rate-parent;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	uart4_fck: uart4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <18>;
+	};
+
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&uart4_fck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 0000000..8415556
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm {
+	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck_3430es2: ssi_ssr_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
+	};
+
+	ssi_sst_fck_3430es2: ssi_sst_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck_3430es2>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-hsotgusb-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick_3430es2: ssi_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usim_gate_fck: usim_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&omap_96m_fck>;
+		ti,bit-shift = <9>;
+		reg = <0x0c00>;
+	};
+
+	sys_d2_ck: sys_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d2_fck: omap_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d4_fck: omap_96m_d4_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	omap_96m_d8_fck: omap_96m_d8_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	omap_96m_d10_fck: omap_96m_d10_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <20>;
+	};
+
+	usim_mux_fck: usim_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	usim_fck: usim_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
+	};
+
+	usim_ick: usim_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <9>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&usim_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&ssi_ick_3430es2>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 380c22e..55ebaaa 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -40,3 +40,8 @@
 		};
 	};
 };
+
+/include/ "omap36xx-clocks.dtsi"
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
new file mode 100644
index 0000000..7b45734
--- /dev/null
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -0,0 +1,1658 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm {
+	virt_16_8m_ck: virt_16_8m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	osc_sys_ck: osc_sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
+		reg = <0x0d40>;
+	};
+
+	sys_ck: sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_sys_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1270>;
+		ti,index-starts-at-one;
+	};
+
+	sys_clkout1: sys_clkout1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&osc_sys_ck>;
+		reg = <0x0d70>;
+		ti,bit-shift = <7>;
+	};
+
+	dpll3_x2_ck: dpll3_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m2x2_ck: dpll3_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_x2_ck: dpll4_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	corex2_fck: corex2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkup_l4_ick: wkup_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+&scrm {
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+
+	mcbsp1_mux_fck: mcbsp1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x0274>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x0274>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+
+	mcbsp3_mux_fck: mcbsp3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+};
+&cm {
+	dummy_apb_pclk: dummy_apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	omap_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_38_4m_ck: virt_38_4m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	dpll4_ck: dpll4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m2_ck: dpll4_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0d48>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_96m_alwon_fck: omap_96m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll3_ck: dpll3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
+	};
+
+	dpll3_m3_ck: dpll3_m3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <31>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_core_alwon_ck: emu_core_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sys_altclk: sys_altclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll3_m2_ck: dpll3_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <31>;
+		reg = <0x0d40>;
+		ti,index-starts-at-one;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll1_fck: dpll1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0940>;
+		ti,index-starts-at-one;
+	};
+
+	dpll1_ck: dpll1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll1_fck>;
+		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
+	};
+
+	dpll1_x2_ck: dpll1_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll1_x2m2_ck: dpll1_x2m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll1_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0944>;
+		ti,index-starts-at-one;
+	};
+
+	cm_96m_fck: cm_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	omap_96m_fck: omap_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0d40>;
+	};
+
+	dpll4_m3_ck: dpll4_m3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_54m_fck: omap_54m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0d40>;
+	};
+
+	cm_96m_d2_fck: cm_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cm_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_48m_fck: omap_48m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+		ti,bit-shift = <3>;
+		reg = <0x0d40>;
+	};
+
+	omap_12m_fck: omap_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll4_m4_ck: dpll4_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m4x2_ck: dpll4_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_mul_ck>;
+		ti,bit-shift = <0x1d>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m5_ck: dpll4_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0f40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m5_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6_ck: dpll4_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <63>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_per_alwon_ck: emu_per_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	clkout2_src_gate_ck: clkout2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_mux_ck: clkout2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_ck: clkout2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
+	};
+
+	sys_clkout2: sys_clkout2 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout2_src_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0d70>;
+		ti,index-power-of-two;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_x2m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	arm_fck: arm_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mpu_ck>;
+		reg = <0x0924>;
+		ti,max-div = <2>;
+	};
+
+	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_ick: l3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	l4_ick: l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,bit-shift = <2>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	rm_ick: rm_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <1>;
+		ti,max-div = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0a00>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0a40>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0a00>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0a40>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	core_96m_fck: core_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_fck: mmchs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_fck: mmchs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <24>;
+	};
+
+	i2c3_fck: i2c3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_fck: i2c2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_fck: i2c1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <15>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <10>;
+		reg = <0x0a00>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <9>;
+		reg = <0x0a00>;
+	};
+
+	core_48m_fck: core_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcspi4_fck: mcspi4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_fck: mcspi3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_fck: mcspi2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_fck: mcspi1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <18>;
+	};
+
+	uart2_fck: uart2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_fck: uart1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <13>;
+	};
+
+	core_12m_fck: core_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_12m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdq_fck: hdq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_12m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <22>;
+	};
+
+	core_l3_ick: core_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdrc_ick: sdrc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_l4_ick: core_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_ick: mmchs2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_ick: mmchs1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <24>;
+	};
+
+	hdq_ick: hdq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <22>;
+	};
+
+	mcspi4_ick: mcspi4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_ick: mcspi3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_ick: mcspi2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_ick: mcspi1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <18>;
+	};
+
+	i2c3_ick: i2c3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_ick: i2c2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_ick: i2c1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <15>;
+	};
+
+	uart2_ick: uart2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_ick: uart1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <13>;
+	};
+
+	gpt11_ick: gpt11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <12>;
+	};
+
+	gpt10_ick: gpt10_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <11>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <10>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <9>;
+	};
+
+	omapctrl_ick: omapctrl_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <6>;
+	};
+
+	dss_tv_fck: dss_tv_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_54m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss_96m_fck: dss_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_96m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss2_alwon_fck: dss2_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <1>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c00>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x0c40>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	aes2_ick: aes2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		ti,bit-shift = <28>;
+		reg = <0x0a10>;
+	};
+
+	wkup_32k_fck: wkup_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbck: gpio1_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <3>;
+	};
+
+	sha12_ick: sha12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <27>;
+	};
+
+	wdt2_fck: wdt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt2_ick: wdt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt1_ick: wdt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <4>;
+	};
+
+	gpio1_ick: gpio1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <3>;
+	};
+
+	omap_32ksync_ick: omap_32ksync_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <2>;
+	};
+
+	gpt12_ick: gpt12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpt1_ick: gpt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <0>;
+	};
+
+	per_96m_fck: per_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_48m_fck: per_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	uart3_fck: uart3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <11>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1000>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x1040>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1000>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1040>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1000>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1040>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1000>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1040>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1000>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1040>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1000>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1040>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x1000>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1040>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1000>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1040>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	per_32k_alwon_fck: per_32k_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_dbck: gpio6_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_dbck: gpio5_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_dbck: gpio4_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_dbck: gpio3_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_dbck: gpio2_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_fck: wdt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <12>;
+	};
+
+	per_l4_ick: per_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_ick: gpio6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_ick: gpio5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_ick: gpio4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_ick: gpio3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_ick: gpio2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_ick: wdt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <12>;
+	};
+
+	uart3_ick: uart3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <11>;
+	};
+
+	uart4_ick: uart4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <18>;
+	};
+
+	gpt9_ick: gpt9_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <10>;
+	};
+
+	gpt8_ick: gpt8_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <9>;
+	};
+
+	gpt7_ick: gpt7_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <8>;
+	};
+
+	gpt6_ick: gpt6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <7>;
+	};
+
+	gpt5_ick: gpt5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <6>;
+	};
+
+	gpt4_ick: gpt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <5>;
+	};
+
+	gpt3_ick: gpt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <4>;
+	};
+
+	gpt2_ick: gpt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <3>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <0>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <1>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <2>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <0>;
+		reg = <0x1000>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <1>;
+		reg = <0x1000>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x1000>;
+	};
+
+	emu_src_mux_ck: emu_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		reg = <0x1140>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	pclk_fck: pclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	pclkx2_fck: pclkx2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	atclk_fck: atclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	traceclk_src_fck: traceclk_src_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1140>;
+	};
+
+	traceclk_fck: traceclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&traceclk_src_fck>;
+		ti,bit-shift = <11>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	secure_32k_fck: secure_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+
+	dpll3_clkdm: dpll3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll3_ck>;
+	};
+
+	dpll1_clkdm: dpll1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll1_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>;
+	};
+
+	emu_clkdm: emu_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&emu_src_ck>;
+	};
+
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
+	};
+};
-- 
1.7.9.5

[PATCHv10 28/41] ARM: dts: omap3 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP3 power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am35xx-clocks.dtsi               |  126 ++
 arch/arm/boot/dts/omap3.dtsi                       |   23 +
 arch/arm/boot/dts/omap3430es1-clocks.dtsi          |  206 +++
 arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi    |  266 ++++
 arch/arm/boot/dts/omap34xx.dtsi                    |    4 +
 .../omap36xx-am35xx-omap3430es2plus-clocks.dtsi    |  240 +++
 arch/arm/boot/dts/omap36xx-clocks.dtsi             |   88 ++
 .../boot/dts/omap36xx-omap3430es2plus-clocks.dtsi  |  196 +++
 arch/arm/boot/dts/omap36xx.dtsi                    |    5 +
 arch/arm/boot/dts/omap3xxx-clocks.dtsi             | 1658 ++++++++++++++++++++
 10 files changed, 2812 insertions(+)
 create mode 100644 arch/arm/boot/dts/am35xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap3430es1-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap3xxx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
new file mode 100644
index 0000000..53e9d61
--- /dev/null
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm {
+	emac_ick: emac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <1>;
+	};
+
+	emac_fck: emac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&rmii_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <9>;
+	};
+
+	vpfe_ick: vpfe_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <2>;
+	};
+
+	vpfe_fck: vpfe_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pclk_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <10>;
+	};
+
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <0>;
+	};
+
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <8>;
+	};
+
+	hecc_ck: hecc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <3>;
+	};
+};
+&cm {
+	ipss_ick: ipss_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	rmii_ck: rmii_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	pclk_ck: pclk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	uart4_ick_am35xx: uart4_ick_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
+			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
+			 <&hecc_ck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f3a0c26..9e6ea02 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -82,6 +82,27 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		prm: prm at 48306000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48306000 0x4000>;
+		};
+
+		cm: cm at 48004000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48004000 0x4000>;
+		};
+
+		scrm: scrm at 48002000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48002000 0x2000>;
+		};
+
 		counter32k: counter at 48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -590,3 +611,5 @@
 		};
 	};
 };
+
+/include/ "omap3xxx-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
new file mode 100644
index 0000000..4c98f24
--- /dev/null
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -0,0 +1,206 @@
+/*
+ * Device Tree Source for OMAP3430 ES1 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm {
+	gfx_l3_ck: gfx_l3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	gfx_l3_fck: gfx_l3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,max-div = <7>;
+		reg = <0x0b40>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_l3_ick: gfx_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gfx_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gfx_cg1_ck: gfx_cg1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <1>;
+	};
+
+	gfx_cg2_ck: gfx_cg2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <2>;
+	};
+
+	d2d_26m_fck: d2d_26m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <3>;
+	};
+
+	fshostusb_fck: fshostusb_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <5>;
+	};
+
+	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck_3430es1: ssi_ssr_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
+	};
+
+	ssi_sst_fck_3430es1: ssi_sst_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck_3430es1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	fac_ick: fac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <8>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick_3430es1: ssi_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <5>;
+		reg = <0x0a10>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <4>;
+		ti,max-div = <1>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	dss1_alwon_fck_3430es1: dss1_alwon_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick_3430es1: dss_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
+	};
+
+	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck_3430es1>, <&dss_ick_3430es1>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&d2d_26m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick_3430es1>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
new file mode 100644
index 0000000..525a24a
--- /dev/null
+++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
@@ -0,0 +1,266 @@
+/*
+ * Device Tree Source for OMAP34XX/OMAP36XX clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm {
+	security_l4_ick2: security_l4_ick2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes1_ick: aes1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		ti,bit-shift = <3>;
+		reg = <0x0a14>;
+	};
+
+	rng_ick: rng_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <2>;
+	};
+
+	sha11_ick: sha11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <1>;
+	};
+
+	des1_ick: des1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <0>;
+	};
+
+	cam_mclk: cam_mclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0f00>;
+		ti,set-rate-parent;
+	};
+
+	cam_ick: cam_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0f10>;
+		ti,bit-shift = <0>;
+	};
+
+	csi2_96m_fck: csi2_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0f00>;
+		ti,bit-shift = <1>;
+	};
+
+	security_l3_ick: security_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pka_ick: pka_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l3_ick>;
+		reg = <0x0a14>;
+		ti,bit-shift = <4>;
+	};
+
+	icr_ick: icr_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <29>;
+	};
+
+	des2_ick: des2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <26>;
+	};
+
+	mspro_ick: mspro_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	mailboxes_ick: mailboxes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <7>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sr1_fck: sr1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <6>;
+	};
+
+	sr2_fck: sr2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <7>;
+	};
+
+	sr_l4_ick: sr_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll2_fck: dpll2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0040>;
+		ti,index-starts-at-one;
+	};
+
+	dpll2_ck: dpll2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
+		ti,low-power-stop;
+		ti,lock;
+		ti,low-power-bypass;
+	};
+
+	dpll2_m2_ck: dpll2_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0044>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_ck: iva2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll2_m2_ck>;
+		reg = <0x0000>;
+		ti,bit-shift = <0>;
+	};
+
+	modem_fck: modem_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <31>;
+	};
+
+	sad2d_ick: sad2d_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <3>;
+	};
+
+	mad2d_ick: mad2d_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <3>;
+	};
+
+	mspro_fck: mspro_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	cam_clkdm: cam_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_ick>, <&csi2_96m_fck>;
+	};
+
+	iva2_clkdm: iva2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva2_ck>;
+	};
+
+	dpll2_clkdm: dpll2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll2_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
+			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
+			 <&mspro_fck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 5355d61..d531abf 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -26,3 +26,7 @@
 		};
 	};
 };
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 0000000..1cc3c68
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm {
+	corex2_d3_fck: corex2_d3_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	corex2_d5_fck: corex2_d5_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+};
+&cm {
+	dpll5_ck: dpll5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
+		ti,low-power-stop;
+		ti,lock;
+	};
+
+	dpll5_m2_ck: dpll5_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll5_ck>;
+		ti,max-div = <31>;
+		reg = <0x0d50>;
+		ti,index-starts-at-one;
+	};
+
+	sgx_gate_fck: sgx_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0b00>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	omap_192m_alwon_fck: omap_192m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	sgx_mux_fck: sgx_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
+		reg = <0x0b40>;
+	};
+
+	sgx_fck: sgx_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
+	};
+
+	sgx_ick: sgx_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	cpefuse_fck: cpefuse_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <0>;
+	};
+
+	ts_fck: ts_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_32k_fck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <1>;
+	};
+
+	usbtll_fck: usbtll_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <2>;
+	};
+
+	usbtll_ick: usbtll_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <2>;
+	};
+
+	mmchs3_ick: mmchs3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <30>;
+	};
+
+	mmchs3_fck: mmchs3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <30>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick_3430es2: dss_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_120m_fck: usbhost_120m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x1400>;
+		ti,bit-shift = <1>;
+	};
+
+	usbhost_48m_fck: usbhost_48m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&omap_48m_fck>;
+		reg = <0x1400>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_ick: usbhost_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x1410>;
+		ti,bit-shift = <0>;
+	};
+
+	dpll5_clkdm: dpll5_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll5_ck>;
+	};
+
+	sgx_clkdm: sgx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sgx_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
+	};
+
+	usbhost_clkdm: usbhost_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
+			 <&usbhost_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
new file mode 100644
index 0000000..985f337
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Device Tree Source for OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm {
+	dpll4_ck: dpll4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-j-type-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-rate-parent;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	uart4_fck: uart4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <18>;
+	};
+
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&uart4_fck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 0000000..8415556
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm {
+	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck_3430es2: ssi_ssr_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
+	};
+
+	ssi_sst_fck_3430es2: ssi_sst_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck_3430es2>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-hsotgusb-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick_3430es2: ssi_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usim_gate_fck: usim_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&omap_96m_fck>;
+		ti,bit-shift = <9>;
+		reg = <0x0c00>;
+	};
+
+	sys_d2_ck: sys_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d2_fck: omap_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d4_fck: omap_96m_d4_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	omap_96m_d8_fck: omap_96m_d8_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	omap_96m_d10_fck: omap_96m_d10_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <20>;
+	};
+
+	usim_mux_fck: usim_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	usim_fck: usim_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
+	};
+
+	usim_ick: usim_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <9>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&usim_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&ssi_ick_3430es2>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 380c22e..55ebaaa 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -40,3 +40,8 @@
 		};
 	};
 };
+
+/include/ "omap36xx-clocks.dtsi"
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
new file mode 100644
index 0000000..7b45734
--- /dev/null
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -0,0 +1,1658 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm {
+	virt_16_8m_ck: virt_16_8m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	osc_sys_ck: osc_sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
+		reg = <0x0d40>;
+	};
+
+	sys_ck: sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_sys_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1270>;
+		ti,index-starts-at-one;
+	};
+
+	sys_clkout1: sys_clkout1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&osc_sys_ck>;
+		reg = <0x0d70>;
+		ti,bit-shift = <7>;
+	};
+
+	dpll3_x2_ck: dpll3_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m2x2_ck: dpll3_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_x2_ck: dpll4_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	corex2_fck: corex2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkup_l4_ick: wkup_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+&scrm {
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+
+	mcbsp1_mux_fck: mcbsp1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x0274>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x0274>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+
+	mcbsp3_mux_fck: mcbsp3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+};
+&cm {
+	dummy_apb_pclk: dummy_apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	omap_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_38_4m_ck: virt_38_4m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	dpll4_ck: dpll4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m2_ck: dpll4_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0d48>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_96m_alwon_fck: omap_96m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll3_ck: dpll3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
+	};
+
+	dpll3_m3_ck: dpll3_m3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <31>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_core_alwon_ck: emu_core_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sys_altclk: sys_altclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll3_m2_ck: dpll3_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <31>;
+		reg = <0x0d40>;
+		ti,index-starts-at-one;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll1_fck: dpll1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0940>;
+		ti,index-starts-at-one;
+	};
+
+	dpll1_ck: dpll1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll1_fck>;
+		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
+	};
+
+	dpll1_x2_ck: dpll1_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll1_x2m2_ck: dpll1_x2m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll1_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0944>;
+		ti,index-starts-at-one;
+	};
+
+	cm_96m_fck: cm_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	omap_96m_fck: omap_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0d40>;
+	};
+
+	dpll4_m3_ck: dpll4_m3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_54m_fck: omap_54m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0d40>;
+	};
+
+	cm_96m_d2_fck: cm_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cm_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_48m_fck: omap_48m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+		ti,bit-shift = <3>;
+		reg = <0x0d40>;
+	};
+
+	omap_12m_fck: omap_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll4_m4_ck: dpll4_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m4x2_ck: dpll4_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_mul_ck>;
+		ti,bit-shift = <0x1d>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m5_ck: dpll4_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0f40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m5_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6_ck: dpll4_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <63>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_per_alwon_ck: emu_per_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	clkout2_src_gate_ck: clkout2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_mux_ck: clkout2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_ck: clkout2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
+	};
+
+	sys_clkout2: sys_clkout2 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout2_src_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0d70>;
+		ti,index-power-of-two;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_x2m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	arm_fck: arm_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mpu_ck>;
+		reg = <0x0924>;
+		ti,max-div = <2>;
+	};
+
+	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_ick: l3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	l4_ick: l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,bit-shift = <2>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	rm_ick: rm_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <1>;
+		ti,max-div = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0a00>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0a40>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0a00>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0a40>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	core_96m_fck: core_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_fck: mmchs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_fck: mmchs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <24>;
+	};
+
+	i2c3_fck: i2c3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_fck: i2c2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_fck: i2c1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <15>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <10>;
+		reg = <0x0a00>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <9>;
+		reg = <0x0a00>;
+	};
+
+	core_48m_fck: core_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcspi4_fck: mcspi4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_fck: mcspi3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_fck: mcspi2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_fck: mcspi1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <18>;
+	};
+
+	uart2_fck: uart2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_fck: uart1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <13>;
+	};
+
+	core_12m_fck: core_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_12m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdq_fck: hdq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_12m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <22>;
+	};
+
+	core_l3_ick: core_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdrc_ick: sdrc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_l4_ick: core_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_ick: mmchs2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_ick: mmchs1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <24>;
+	};
+
+	hdq_ick: hdq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <22>;
+	};
+
+	mcspi4_ick: mcspi4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_ick: mcspi3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_ick: mcspi2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_ick: mcspi1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <18>;
+	};
+
+	i2c3_ick: i2c3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_ick: i2c2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_ick: i2c1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <15>;
+	};
+
+	uart2_ick: uart2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_ick: uart1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <13>;
+	};
+
+	gpt11_ick: gpt11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <12>;
+	};
+
+	gpt10_ick: gpt10_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <11>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <10>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <9>;
+	};
+
+	omapctrl_ick: omapctrl_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <6>;
+	};
+
+	dss_tv_fck: dss_tv_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_54m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss_96m_fck: dss_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_96m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss2_alwon_fck: dss2_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <1>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c00>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x0c40>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	aes2_ick: aes2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		ti,bit-shift = <28>;
+		reg = <0x0a10>;
+	};
+
+	wkup_32k_fck: wkup_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbck: gpio1_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <3>;
+	};
+
+	sha12_ick: sha12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <27>;
+	};
+
+	wdt2_fck: wdt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt2_ick: wdt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt1_ick: wdt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <4>;
+	};
+
+	gpio1_ick: gpio1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <3>;
+	};
+
+	omap_32ksync_ick: omap_32ksync_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <2>;
+	};
+
+	gpt12_ick: gpt12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpt1_ick: gpt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <0>;
+	};
+
+	per_96m_fck: per_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_48m_fck: per_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	uart3_fck: uart3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <11>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1000>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x1040>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1000>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1040>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1000>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1040>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1000>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1040>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1000>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1040>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1000>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1040>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x1000>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1040>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1000>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1040>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	per_32k_alwon_fck: per_32k_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_dbck: gpio6_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_dbck: gpio5_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_dbck: gpio4_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_dbck: gpio3_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_dbck: gpio2_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_fck: wdt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <12>;
+	};
+
+	per_l4_ick: per_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_ick: gpio6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_ick: gpio5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_ick: gpio4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_ick: gpio3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_ick: gpio2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_ick: wdt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <12>;
+	};
+
+	uart3_ick: uart3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <11>;
+	};
+
+	uart4_ick: uart4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <18>;
+	};
+
+	gpt9_ick: gpt9_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <10>;
+	};
+
+	gpt8_ick: gpt8_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <9>;
+	};
+
+	gpt7_ick: gpt7_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <8>;
+	};
+
+	gpt6_ick: gpt6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <7>;
+	};
+
+	gpt5_ick: gpt5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <6>;
+	};
+
+	gpt4_ick: gpt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <5>;
+	};
+
+	gpt3_ick: gpt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <4>;
+	};
+
+	gpt2_ick: gpt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <3>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <0>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <1>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <2>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <0>;
+		reg = <0x1000>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <1>;
+		reg = <0x1000>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x1000>;
+	};
+
+	emu_src_mux_ck: emu_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		reg = <0x1140>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	pclk_fck: pclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	pclkx2_fck: pclkx2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	atclk_fck: atclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	traceclk_src_fck: traceclk_src_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1140>;
+	};
+
+	traceclk_fck: traceclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&traceclk_src_fck>;
+		ti,bit-shift = <11>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	secure_32k_fck: secure_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+
+	dpll3_clkdm: dpll3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll3_ck>;
+	};
+
+	dpll1_clkdm: dpll1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll1_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>;
+	};
+
+	emu_clkdm: emu_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&emu_src_ck>;
+	};
+
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
+	};
+};
-- 
1.7.9.5

Re: [PATCHv10 28/41] ARM: dts: omap3 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the OMAP3 power,
> reset and clock manager (PRCM).
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>


> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index f3a0c26..9e6ea02 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -82,6 +82,27 @@
>  		ranges;
>  		ti,hwmods = "l3_main";
>  
> +		prm: prm@48306000 {
> +			compatible = "ti,clock-master";

Likewise, same issues here with the compatible strings and
separating out the clocks and clockdomain data into separate DT
nodes, as discussed with the OMAP4 data patch.



- Paul

[PATCHv10 28/41] ARM: dts: omap3 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the OMAP3 power,
> reset and clock manager (PRCM).
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>


> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index f3a0c26..9e6ea02 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -82,6 +82,27 @@
>  		ranges;
>  		ti,hwmods = "l3_main";
>  
> +		prm: prm at 48306000 {
> +			compatible = "ti,clock-master";

Likewise, same issues here with the compatible strings and
separating out the clocks and clockdomain data into separate DT
nodes, as discussed with the OMAP4 data patch.



- Paul

[PATCHv10 29/41] ARM: dts: AM35xx: use DT clock data

[Tero Kristo]

AM35xx now uses the clock data from device tree. Most of the data is
shared with OMAP3xxx, but as there is some delta, a new base .dtsi
file is also created for the SoC.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am3517-evm.dts        |    2 +-
 arch/arm/boot/dts/am3517.dtsi           |   31 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am3517_mt_ventoux.dts |    2 +-
 3 files changed, 33 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/am3517.dtsi

diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index e99dfaf..9ff51d7 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
 
 / {
 	model = "TI AM3517 EVM (AM3517/05)";
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
new file mode 100644
index 0000000..6e8157c
--- /dev/null
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -0,0 +1,31 @@
+/*
+ * Device Tree Source for AM3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			/* AM35xx variants OPP1-5 */
+			operating-points = <
+				/* kHz    uV */
+				125000   975000
+				250000  1075000
+				500000  1200000
+				550000  1270000
+				600000  1350000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+};
+
+/include/ "am35xx-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
index fdf5ce6..d00e934 100644
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts
@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
 
 / {
 	model = "TeeJet Mt.Ventoux";
-- 
1.7.9.5

[PATCHv10 29/41] ARM: dts: AM35xx: use DT clock data

[Tero Kristo]

AM35xx now uses the clock data from device tree. Most of the data is
shared with OMAP3xxx, but as there is some delta, a new base .dtsi
file is also created for the SoC.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am3517-evm.dts        |    2 +-
 arch/arm/boot/dts/am3517.dtsi           |   31 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am3517_mt_ventoux.dts |    2 +-
 3 files changed, 33 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/am3517.dtsi

diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index e99dfaf..9ff51d7 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
 
 / {
 	model = "TI AM3517 EVM (AM3517/05)";
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
new file mode 100644
index 0000000..6e8157c
--- /dev/null
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -0,0 +1,31 @@
+/*
+ * Device Tree Source for AM3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	cpus {
+		cpu at 0 {
+			/* AM35xx variants OPP1-5 */
+			operating-points = <
+				/* kHz    uV */
+				125000   975000
+				250000  1075000
+				500000  1200000
+				550000  1270000
+				600000  1350000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+};
+
+/include/ "am35xx-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
index fdf5ce6..d00e934 100644
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts
@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
 
 / {
 	model = "TeeJet Mt.Ventoux";
-- 
1.7.9.5

[PATCHv10 30/41] ARM: dts: am43xx clock data

[Tero Kristo]

This patch creates a unique node for each clock in the AM43xx power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am4372.dtsi        |   16 +
 arch/arm/boot/dts/am43xx-clocks.dtsi |  656 ++++++++++++++++++++++++++++++++++
 2 files changed, 672 insertions(+)
 create mode 100644 arch/arm/boot/dts/am43xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 974d103..18f2401 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -67,6 +67,20 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		prcm: prcm@44df0000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44df0000 0x11000>;
+		};
+
+		scrm: scrm@44e10000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44e10000 0x2000>;
+		};
+
 		edma: edma@49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
@@ -665,3 +679,5 @@
 		};
 	};
 };
+
+/include/ "am43xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
new file mode 100644
index 0000000..bc8c814
--- /dev/null
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -0,0 +1,656 @@
+/*
+ * Device Tree Source for AM43xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+&prcm {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d3c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d40>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e30>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2df0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a38>;
+	};
+
+	sysclk_div: sysclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
+		reg = <0x4248>;
+	};
+
+	clk_32k_tpm_ck: clk_32k_tpm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4200>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4204>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4208>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x420c>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4210>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4214>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4218>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x422c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
+		reg = <0x4238>;
+	};
+
+	clk_32k_mosc_ck: clk_32k_mosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4240>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2b68>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c78>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c80>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c88>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c90>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c98>;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x423c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x423c>;
+		ti,max-div = <2>;
+	};
+
+	disp_clk: disp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x4244>;
+	};
+
+	dpll_extdev_ck: dpll_extdev_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+	};
+
+	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_extdev_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mux_synctimer32k_ck: mux_synctimer32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
+		reg = <0x4230>;
+	};
+
+	synctimer_32kclk: synctimer_32kclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&mux_synctimer32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a30>;
+	};
+
+	timer8_fck: timer8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x421c>;
+	};
+
+	timer9_fck: timer9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4220>;
+	};
+
+	timer10_fck: timer10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4224>;
+	};
+
+	timer11_fck: timer11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4228>;
+	};
+
+	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpsw_50m_clkdiv>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dll_aging_clk_div: dll_aging_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x4250>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	div_core_25m_ck: div_core_25m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_12m_clk: func_12m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	vtp_clk_div: vtp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4260>;
+	};
+};
-- 
1.7.9.5

[PATCHv10 30/41] ARM: dts: am43xx clock data

[Tero Kristo]

This patch creates a unique node for each clock in the AM43xx power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am4372.dtsi        |   16 +
 arch/arm/boot/dts/am43xx-clocks.dtsi |  656 ++++++++++++++++++++++++++++++++++
 2 files changed, 672 insertions(+)
 create mode 100644 arch/arm/boot/dts/am43xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 974d103..18f2401 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -67,6 +67,20 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		prcm: prcm at 44df0000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44df0000 0x11000>;
+		};
+
+		scrm: scrm at 44e10000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44e10000 0x2000>;
+		};
+
 		edma: edma at 49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
@@ -665,3 +679,5 @@
 		};
 	};
 };
+
+/include/ "am43xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
new file mode 100644
index 0000000..bc8c814
--- /dev/null
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -0,0 +1,656 @@
+/*
+ * Device Tree Source for AM43xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+&prcm {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d3c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d40>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e30>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2df0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a38>;
+	};
+
+	sysclk_div: sysclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
+		reg = <0x4248>;
+	};
+
+	clk_32k_tpm_ck: clk_32k_tpm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4200>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4204>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4208>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x420c>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4210>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4214>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4218>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x422c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
+		reg = <0x4238>;
+	};
+
+	clk_32k_mosc_ck: clk_32k_mosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4240>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2b68>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c78>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c80>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c88>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c90>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c98>;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x423c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x423c>;
+		ti,max-div = <2>;
+	};
+
+	disp_clk: disp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x4244>;
+	};
+
+	dpll_extdev_ck: dpll_extdev_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+	};
+
+	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_extdev_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mux_synctimer32k_ck: mux_synctimer32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
+		reg = <0x4230>;
+	};
+
+	synctimer_32kclk: synctimer_32kclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&mux_synctimer32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a30>;
+	};
+
+	timer8_fck: timer8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x421c>;
+	};
+
+	timer9_fck: timer9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4220>;
+	};
+
+	timer10_fck: timer10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4224>;
+	};
+
+	timer11_fck: timer11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4228>;
+	};
+
+	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpsw_50m_clkdiv>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dll_aging_clk_div: dll_aging_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x4250>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	div_core_25m_ck: div_core_25m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_12m_clk: func_12m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	vtp_clk_div: vtp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4260>;
+	};
+};
-- 
1.7.9.5

Re: [PATCHv10 30/41] ARM: dts: am43xx clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the AM43xx power,
> reset and clock manager (PRCM).
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index 974d103..18f2401 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -67,6 +67,20 @@
>  		ranges;
>  		ti,hwmods = "l3_main";
>  
> +		prcm: prcm@44df0000 {
> +			compatible = "ti,clock-master";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x44df0000 0x11000>;
> +		};
> +
> +		scrm: scrm@44e10000 {
> +			compatible = "ti,clock-master";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x44e10000 0x2000>;
> +		};

Same issues here with the compatible strings and
separating out the clocks and clockdomain data into separate DT
nodes, as discussed with the OMAP4 data patch.


- Paul

[PATCHv10 30/41] ARM: dts: am43xx clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the AM43xx power,
> reset and clock manager (PRCM).
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index 974d103..18f2401 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -67,6 +67,20 @@
>  		ranges;
>  		ti,hwmods = "l3_main";
>  
> +		prcm: prcm at 44df0000 {
> +			compatible = "ti,clock-master";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x44df0000 0x11000>;
> +		};
> +
> +		scrm: scrm at 44e10000 {
> +			compatible = "ti,clock-master";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x44e10000 0x2000>;
> +		};

Same issues here with the compatible strings and
separating out the clocks and clockdomain data into separate DT
nodes, as discussed with the OMAP4 data patch.


- Paul

[PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap

[Tero Kristo]

Using regmap is required for isolating the actual memory access from
the clock code. Now, the driver providing the support for the clock IP
block can provide a regmap for this purpose.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c |   27 ++++++++++++++++++++++++++-
 arch/arm/mach-omap2/clock.h |    3 +++
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 238be3f..1ef6df8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -25,7 +25,7 @@
 #include <linux/bitops.h>
 #include <linux/clk-private.h>
 #include <asm/cpu.h>
-
+#include <linux/regmap.h>
 
 #include <trace/events/power.h>
 
@@ -56,6 +56,31 @@ u16 cpu_mask;
 static bool clkdm_control = true;
 
 static LIST_HEAD(clk_hw_omap_clocks);
+struct regmap *clk_regmaps[CLK_MAX_REGMAPS];
+
+void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
+{
+	if (clk->flags & REGMAP_ADDRESSING) {
+		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+		regmap_write(clk_regmaps[r->index], r->offset, val);
+	} else {
+		__raw_writel(val, reg);
+	}
+}
+
+u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
+{
+	u32 val;
+
+	if (clk->flags & REGMAP_ADDRESSING) {
+		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+		regmap_read(clk_regmaps[r->index], r->offset, &val);
+	} else {
+		val = __raw_readl(reg);
+	}
+
+	return val;
+}
 
 /*
  * Used for clocks that have the same value as the parent clock,
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index cbe5ff7..9595d72 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -254,6 +254,9 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
 
+u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
+void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
+
 extern u16 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
-- 
1.7.9.5

[PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap

[Tero Kristo]

Using regmap is required for isolating the actual memory access from
the clock code. Now, the driver providing the support for the clock IP
block can provide a regmap for this purpose.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c |   27 ++++++++++++++++++++++++++-
 arch/arm/mach-omap2/clock.h |    3 +++
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 238be3f..1ef6df8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -25,7 +25,7 @@
 #include <linux/bitops.h>
 #include <linux/clk-private.h>
 #include <asm/cpu.h>
-
+#include <linux/regmap.h>
 
 #include <trace/events/power.h>
 
@@ -56,6 +56,31 @@ u16 cpu_mask;
 static bool clkdm_control = true;
 
 static LIST_HEAD(clk_hw_omap_clocks);
+struct regmap *clk_regmaps[CLK_MAX_REGMAPS];
+
+void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
+{
+	if (clk->flags & REGMAP_ADDRESSING) {
+		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+		regmap_write(clk_regmaps[r->index], r->offset, val);
+	} else {
+		__raw_writel(val, reg);
+	}
+}
+
+u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
+{
+	u32 val;
+
+	if (clk->flags & REGMAP_ADDRESSING) {
+		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+		regmap_read(clk_regmaps[r->index], r->offset, &val);
+	} else {
+		val = __raw_readl(reg);
+	}
+
+	return val;
+}
 
 /*
  * Used for clocks that have the same value as the parent clock,
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index cbe5ff7..9595d72 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -254,6 +254,9 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
 
+u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
+void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
+
 extern u16 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
-- 
1.7.9.5

Re: [PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [131126 00:10]:
> Using regmap is required for isolating the actual memory access from
> the clock code. Now, the driver providing the support for the clock IP
> block can provide a regmap for this purpose.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  arch/arm/mach-omap2/clock.c |   27 ++++++++++++++++++++++++++-
>  arch/arm/mach-omap2/clock.h |    3 +++
>  2 files changed, 29 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
> index 238be3f..1ef6df8 100644
> --- a/arch/arm/mach-omap2/clock.c
> +++ b/arch/arm/mach-omap2/clock.c
> @@ -25,7 +25,7 @@
>  #include <linux/bitops.h>
>  #include <linux/clk-private.h>
>  #include <asm/cpu.h>
> -
> +#include <linux/regmap.h>
>  
>  #include <trace/events/power.h>
>  
> @@ -56,6 +56,31 @@ u16 cpu_mask;
>  static bool clkdm_control = true;
>  
>  static LIST_HEAD(clk_hw_omap_clocks);
> +struct regmap *clk_regmaps[CLK_MAX_REGMAPS];
> +
> +void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
> +{
> +	if (clk->flags & REGMAP_ADDRESSING) {
> +		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
> +		regmap_write(clk_regmaps[r->index], r->offset, val);
> +	} else {
> +		__raw_writel(val, reg);
> +	}
> +}
> +
> +u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
> +{
> +	u32 val;
> +
> +	if (clk->flags & REGMAP_ADDRESSING) {
> +		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
> +		regmap_read(clk_regmaps[r->index], r->offset, &val);
> +	} else {
> +		val = __raw_readl(reg);
> +	}
> +
> +	return val;
> +}
>  
>  /*
>   * Used for clocks that have the same value as the parent clock,

Maybe use read[lw]_relaxed and write[lw]_relaxed here and elsewhere
instead of __raw_read/write to help cut down the changes needed for
the big endian patch set?

Regards,

Tony

[PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [131126 00:10]:
> Using regmap is required for isolating the actual memory access from
> the clock code. Now, the driver providing the support for the clock IP
> block can provide a regmap for this purpose.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  arch/arm/mach-omap2/clock.c |   27 ++++++++++++++++++++++++++-
>  arch/arm/mach-omap2/clock.h |    3 +++
>  2 files changed, 29 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
> index 238be3f..1ef6df8 100644
> --- a/arch/arm/mach-omap2/clock.c
> +++ b/arch/arm/mach-omap2/clock.c
> @@ -25,7 +25,7 @@
>  #include <linux/bitops.h>
>  #include <linux/clk-private.h>
>  #include <asm/cpu.h>
> -
> +#include <linux/regmap.h>
>  
>  #include <trace/events/power.h>
>  
> @@ -56,6 +56,31 @@ u16 cpu_mask;
>  static bool clkdm_control = true;
>  
>  static LIST_HEAD(clk_hw_omap_clocks);
> +struct regmap *clk_regmaps[CLK_MAX_REGMAPS];
> +
> +void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
> +{
> +	if (clk->flags & REGMAP_ADDRESSING) {
> +		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
> +		regmap_write(clk_regmaps[r->index], r->offset, val);
> +	} else {
> +		__raw_writel(val, reg);
> +	}
> +}
> +
> +u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
> +{
> +	u32 val;
> +
> +	if (clk->flags & REGMAP_ADDRESSING) {
> +		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
> +		regmap_read(clk_regmaps[r->index], r->offset, &val);
> +	} else {
> +		val = __raw_readl(reg);
> +	}
> +
> +	return val;
> +}
>  
>  /*
>   * Used for clocks that have the same value as the parent clock,

Maybe use read[lw]_relaxed and write[lw]_relaxed here and elsewhere
instead of __raw_read/write to help cut down the changes needed for
the big endian patch set?

Regards,

Tony

Re: [PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap

[Tero Kristo]

On 11/26/2013 07:40 PM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [131126 00:10]:
>> Using regmap is required for isolating the actual memory access from
>> the clock code. Now, the driver providing the support for the clock IP
>> block can provide a regmap for this purpose.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   arch/arm/mach-omap2/clock.c |   27 ++++++++++++++++++++++++++-
>>   arch/arm/mach-omap2/clock.h |    3 +++
>>   2 files changed, 29 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
>> index 238be3f..1ef6df8 100644
>> --- a/arch/arm/mach-omap2/clock.c
>> +++ b/arch/arm/mach-omap2/clock.c
>> @@ -25,7 +25,7 @@
>>   #include <linux/bitops.h>
>>   #include <linux/clk-private.h>
>>   #include <asm/cpu.h>
>> -
>> +#include <linux/regmap.h>
>>
>>   #include <trace/events/power.h>
>>
>> @@ -56,6 +56,31 @@ u16 cpu_mask;
>>   static bool clkdm_control = true;
>>
>>   static LIST_HEAD(clk_hw_omap_clocks);
>> +struct regmap *clk_regmaps[CLK_MAX_REGMAPS];
>> +
>> +void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
>> +{
>> +	if (clk->flags & REGMAP_ADDRESSING) {
>> +		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
>> +		regmap_write(clk_regmaps[r->index], r->offset, val);
>> +	} else {
>> +		__raw_writel(val, reg);
>> +	}
>> +}
>> +
>> +u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
>> +{
>> +	u32 val;
>> +
>> +	if (clk->flags & REGMAP_ADDRESSING) {
>> +		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
>> +		regmap_read(clk_regmaps[r->index], r->offset, &val);
>> +	} else {
>> +		val = __raw_readl(reg);
>> +	}
>> +
>> +	return val;
>> +}
>>
>>   /*
>>    * Used for clocks that have the same value as the parent clock,
>
> Maybe use read[lw]_relaxed and write[lw]_relaxed here and elsewhere
> instead of __raw_read/write to help cut down the changes needed for
> the big endian patch set?

Well, this is the only place where we have a call to __raw_readl / 
__raw_writel in this patch set, the next patch actually removes all 
these calls from mach-omap2. But yes, I can change this.

-Tero

[PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap

[Tero Kristo]

On 11/26/2013 07:40 PM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [131126 00:10]:
>> Using regmap is required for isolating the actual memory access from
>> the clock code. Now, the driver providing the support for the clock IP
>> block can provide a regmap for this purpose.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   arch/arm/mach-omap2/clock.c |   27 ++++++++++++++++++++++++++-
>>   arch/arm/mach-omap2/clock.h |    3 +++
>>   2 files changed, 29 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
>> index 238be3f..1ef6df8 100644
>> --- a/arch/arm/mach-omap2/clock.c
>> +++ b/arch/arm/mach-omap2/clock.c
>> @@ -25,7 +25,7 @@
>>   #include <linux/bitops.h>
>>   #include <linux/clk-private.h>
>>   #include <asm/cpu.h>
>> -
>> +#include <linux/regmap.h>
>>
>>   #include <trace/events/power.h>
>>
>> @@ -56,6 +56,31 @@ u16 cpu_mask;
>>   static bool clkdm_control = true;
>>
>>   static LIST_HEAD(clk_hw_omap_clocks);
>> +struct regmap *clk_regmaps[CLK_MAX_REGMAPS];
>> +
>> +void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
>> +{
>> +	if (clk->flags & REGMAP_ADDRESSING) {
>> +		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
>> +		regmap_write(clk_regmaps[r->index], r->offset, val);
>> +	} else {
>> +		__raw_writel(val, reg);
>> +	}
>> +}
>> +
>> +u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
>> +{
>> +	u32 val;
>> +
>> +	if (clk->flags & REGMAP_ADDRESSING) {
>> +		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
>> +		regmap_read(clk_regmaps[r->index], r->offset, &val);
>> +	} else {
>> +		val = __raw_readl(reg);
>> +	}
>> +
>> +	return val;
>> +}
>>
>>   /*
>>    * Used for clocks that have the same value as the parent clock,
>
> Maybe use read[lw]_relaxed and write[lw]_relaxed here and elsewhere
> instead of __raw_read/write to help cut down the changes needed for
> the big endian patch set?

Well, this is the only place where we have a call to __raw_readl / 
__raw_writel in this patch set, the next patch actually removes all 
these calls from mach-omap2. But yes, I can change this.

-Tero

[PATCHv10 32/41] ARM: OMAP2+: clock: use driver API instead of direct memory read/write

[Tero Kristo]

Clock nodes shall use the services provided by underlying drivers to access
the hardware registers instead of direct memory read/write. Thus, change
all the code to use the new omap2_clk_readl / omap2_clk_writel APIs for this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clkt_clksel.c |   10 +++++-----
 arch/arm/mach-omap2/clkt_dpll.c   |    6 +++---
 arch/arm/mach-omap2/clkt_iclk.c   |   20 ++++++++++++--------
 arch/arm/mach-omap2/clock.c       |   24 ++++++++++++------------
 arch/arm/mach-omap2/clock36xx.c   |    7 ++++---
 arch/arm/mach-omap2/dpll3xxx.c    |   37 ++++++++++++++++++++-----------------
 arch/arm/mach-omap2/dpll44xx.c    |   12 ++++++------
 7 files changed, 62 insertions(+), 54 deletions(-)

diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 0ec9f6f..7ee2610 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -97,12 +97,12 @@ static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
 {
 	u32 v;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= ~clk->clksel_mask;
 	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+	v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
 }
 
 /**
@@ -204,7 +204,7 @@ static u32 _read_divisor(struct clk_hw_omap *clk)
 	if (!clk->clksel || !clk->clksel_mask)
 		return 0;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= clk->clksel_mask;
 	v >>= __ffs(clk->clksel_mask);
 
@@ -320,7 +320,7 @@ u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
 	WARN((!clk->clksel || !clk->clksel_mask),
 	     "clock: %s: attempt to call on a non-clksel clock", clk_name);
 
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
 	r >>= __ffs(clk->clksel_mask);
 
 	for (clks = clk->clksel; clks->parent && !found; clks++) {
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 924c230..47f9562 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -196,7 +196,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
 	if (!dd)
 		return -EINVAL;
 
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -243,7 +243,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 		return 0;
 
 	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -262,7 +262,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 			return __clk_get_rate(dd->clk_bypass);
 	}
 
-	v = __raw_readl(dd->mult_div1_reg);
+	v = omap2_clk_readl(clk, dd->mult_div1_reg);
 	dpll_mult = v & dd->mult_mask;
 	dpll_mult >>= __ffs(dd->mult_mask);
 	dpll_div = v & dd->div1_mask;
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index f10eb03..333f0a6 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -25,25 +25,29 @@
 /* XXX */
 void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
 {
-	u32 v, r;
+	u32 v;
+	void __iomem *r;
 
-	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+	r = (__force void __iomem *)
+		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
 
-	v = __raw_readl((__force void __iomem *)r);
+	v = omap2_clk_readl(clk, r);
 	v |= (1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
+	omap2_clk_writel(v, clk, r);
 }
 
 /* XXX */
 void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
 {
-	u32 v, r;
+	u32 v;
+	void __iomem *r;
 
-	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+	r = (__force void __iomem *)
+		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
 
-	v = __raw_readl((__force void __iomem *)r);
+	v = omap2_clk_readl(clk, r);
 	v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
+	omap2_clk_writel(v, clk, r);
 }
 
 /* Public data */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 1ef6df8..364b8f1 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -123,14 +123,14 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
  * elapsed.  XXX Deprecated - should be moved into drivers for the
  * individual IP block that the IDLEST register exists in.
  */
-static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest,
-				const char *name)
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+				u32 mask, u8 idlest, const char *name)
 {
 	int i = 0, ena = 0;
 
 	ena = (idlest) ? 0 : mask;
 
-	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+	omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
 			  MAX_MODULE_ENABLE_WAIT, i);
 
 	if (i < MAX_MODULE_ENABLE_WAIT)
@@ -163,7 +163,7 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 	/* Not all modules have multiple clocks that their IDLEST depends on */
 	if (clk->ops->find_companion) {
 		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+		if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
 			return;
 	}
 
@@ -171,8 +171,8 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 	r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
 	if (r) {
 		/* IDLEST register not in the CM module */
-		_wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val,
-				     __clk_get_name(clk->hw.clk));
+		_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+				     idlest_val, __clk_get_name(clk->hw.clk));
 	} else {
 		cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
 	};
@@ -334,13 +334,13 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
 	}
 
 	/* FIXME should not have INVERT_ENABLE bit here */
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
 		v &= ~(1 << clk->enable_bit);
 	else
 		v |= (1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
-	v = __raw_readl(clk->enable_reg); /* OCP barrier */
+	omap2_clk_writel(v, clk, clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
 
 	if (clk->ops && clk->ops->find_idlest)
 		_omap2_module_wait_ready(clk);
@@ -378,12 +378,12 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
 		return;
 	}
 
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
 		v |= (1 << clk->enable_bit);
 	else
 		v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
+	omap2_clk_writel(v, clk, clk->enable_reg);
 	/* No OCP barrier needed here since it is a disable operation */
 
 	if (clkdm_control && clk->clkdm)
@@ -479,7 +479,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 v;
 
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 
 	if (clk->flags & INVERT_ENABLE)
 		v ^= BIT(clk->enable_bit);
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index bbd6a3f..91ccb96 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -43,6 +43,7 @@ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 	struct clk_divider *parent;
 	struct clk_hw *parent_hw;
 	u32 dummy_v, orig_v;
+	struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
 	int ret;
 
 	/* Clear PWRDN bit of HSDIVIDER */
@@ -53,15 +54,15 @@ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 
 	/* Restore the dividers */
 	if (!ret) {
-		orig_v = __raw_readl(parent->reg);
+		orig_v = omap2_clk_readl(omap_clk, parent->reg);
 		dummy_v = orig_v;
 
 		/* Write any other value different from the Read value */
 		dummy_v ^= (1 << parent->shift);
-		__raw_writel(dummy_v, parent->reg);
+		omap2_clk_writel(dummy_v, omap_clk, parent->reg);
 
 		/* Write the original divider */
-		__raw_writel(orig_v, parent->reg);
+		omap2_clk_writel(orig_v, omap_clk, parent->reg);
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 3a0296c..3185ced 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -50,10 +50,10 @@ static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
 
 	dd = clk->dpll_data;
 
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= ~dd->enable_mask;
 	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
+	omap2_clk_writel(v, clk, dd->control_reg);
 }
 
 /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -69,8 +69,8 @@ static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
 
 	state <<= __ffs(dd->idlest_mask);
 
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
-	       i < MAX_DPLL_WAIT_TRIES) {
+	while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
+		!= state) && i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
 	}
@@ -147,7 +147,7 @@ static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
 	state <<= __ffs(dd->idlest_mask);
 
 	/* Check if already locked */
-	if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+	if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
 		goto done;
 
 	ai = omap3_dpll_autoidle_read(clk);
@@ -311,14 +311,14 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 	 * only since freqsel field is no longer present on other devices.
 	 */
 	if (cpu_is_omap343x()) {
-		v = __raw_readl(dd->control_reg);
+		v = omap2_clk_readl(clk, dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
-		__raw_writel(v, dd->control_reg);
+		omap2_clk_writel(v, clk, dd->control_reg);
 	}
 
 	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
+	v = omap2_clk_readl(clk, dd->mult_div1_reg);
 	v &= ~(dd->mult_mask | dd->div1_mask);
 	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
 	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
@@ -336,11 +336,11 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 		v |= sd_div << __ffs(dd->sddiv_mask);
 	}
 
-	__raw_writel(v, dd->mult_div1_reg);
+	omap2_clk_writel(v, clk, dd->mult_div1_reg);
 
 	/* Set 4X multiplier and low-power mode */
 	if (dd->m4xen_mask || dd->lpmode_mask) {
-		v = __raw_readl(dd->control_reg);
+		v = omap2_clk_readl(clk, dd->control_reg);
 
 		if (dd->m4xen_mask) {
 			if (dd->last_rounded_m4xen)
@@ -356,7 +356,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 				v &= ~dd->lpmode_mask;
 		}
 
-		__raw_writel(v, dd->control_reg);
+		omap2_clk_writel(v, clk, dd->control_reg);
 	}
 
 	/* We let the clock framework set the other output dividers later */
@@ -554,7 +554,7 @@ u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
 	if (!dd->autoidle_reg)
 		return -EINVAL;
 
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
 
@@ -588,10 +588,10 @@ void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
 	 * optionally enter this mode.
 	 */
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
+	omap2_clk_writel(v, clk, dd->autoidle_reg);
 
 }
 
@@ -614,10 +614,10 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 	if (!dd->autoidle_reg)
 		return;
 
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
+	omap2_clk_writel(v, clk, dd->autoidle_reg);
 
 }
 
@@ -639,6 +639,9 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	struct clk_hw_omap *pclk = NULL;
 	struct clk *parent;
 
+	if (!parent_rate)
+		return 0;
+
 	/* Walk up the parents of clk, looking for a DPLL */
 	do {
 		do {
@@ -660,7 +663,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 
 	WARN_ON(!dd->enable_mask);
 
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
 		rate = parent_rate;
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index d28b0f7..52f9438 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -42,7 +42,7 @@ int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= mask;
 	v >>= __ffs(mask);
 
@@ -61,10 +61,10 @@ void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	/* Clear the bit to allow gatectrl */
 	v &= ~mask;
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 }
 
 void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
@@ -79,10 +79,10 @@ void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	/* Set the bit to deny gatectrl */
 	v |= mask;
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 }
 
 const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
@@ -140,7 +140,7 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
 	rate = omap2_get_dpll_rate(clk);
 
 	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
 		rate *= OMAP4430_REGM4XEN_MULT;
 
-- 
1.7.9.5

[PATCHv10 32/41] ARM: OMAP2+: clock: use driver API instead of direct memory read/write

[Tero Kristo]

Clock nodes shall use the services provided by underlying drivers to access
the hardware registers instead of direct memory read/write. Thus, change
all the code to use the new omap2_clk_readl / omap2_clk_writel APIs for this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clkt_clksel.c |   10 +++++-----
 arch/arm/mach-omap2/clkt_dpll.c   |    6 +++---
 arch/arm/mach-omap2/clkt_iclk.c   |   20 ++++++++++++--------
 arch/arm/mach-omap2/clock.c       |   24 ++++++++++++------------
 arch/arm/mach-omap2/clock36xx.c   |    7 ++++---
 arch/arm/mach-omap2/dpll3xxx.c    |   37 ++++++++++++++++++++-----------------
 arch/arm/mach-omap2/dpll44xx.c    |   12 ++++++------
 7 files changed, 62 insertions(+), 54 deletions(-)

diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 0ec9f6f..7ee2610 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -97,12 +97,12 @@ static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
 {
 	u32 v;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= ~clk->clksel_mask;
 	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+	v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
 }
 
 /**
@@ -204,7 +204,7 @@ static u32 _read_divisor(struct clk_hw_omap *clk)
 	if (!clk->clksel || !clk->clksel_mask)
 		return 0;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= clk->clksel_mask;
 	v >>= __ffs(clk->clksel_mask);
 
@@ -320,7 +320,7 @@ u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
 	WARN((!clk->clksel || !clk->clksel_mask),
 	     "clock: %s: attempt to call on a non-clksel clock", clk_name);
 
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
 	r >>= __ffs(clk->clksel_mask);
 
 	for (clks = clk->clksel; clks->parent && !found; clks++) {
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 924c230..47f9562 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -196,7 +196,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
 	if (!dd)
 		return -EINVAL;
 
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -243,7 +243,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 		return 0;
 
 	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -262,7 +262,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 			return __clk_get_rate(dd->clk_bypass);
 	}
 
-	v = __raw_readl(dd->mult_div1_reg);
+	v = omap2_clk_readl(clk, dd->mult_div1_reg);
 	dpll_mult = v & dd->mult_mask;
 	dpll_mult >>= __ffs(dd->mult_mask);
 	dpll_div = v & dd->div1_mask;
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index f10eb03..333f0a6 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -25,25 +25,29 @@
 /* XXX */
 void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
 {
-	u32 v, r;
+	u32 v;
+	void __iomem *r;
 
-	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+	r = (__force void __iomem *)
+		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
 
-	v = __raw_readl((__force void __iomem *)r);
+	v = omap2_clk_readl(clk, r);
 	v |= (1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
+	omap2_clk_writel(v, clk, r);
 }
 
 /* XXX */
 void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
 {
-	u32 v, r;
+	u32 v;
+	void __iomem *r;
 
-	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+	r = (__force void __iomem *)
+		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
 
-	v = __raw_readl((__force void __iomem *)r);
+	v = omap2_clk_readl(clk, r);
 	v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
+	omap2_clk_writel(v, clk, r);
 }
 
 /* Public data */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 1ef6df8..364b8f1 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -123,14 +123,14 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
  * elapsed.  XXX Deprecated - should be moved into drivers for the
  * individual IP block that the IDLEST register exists in.
  */
-static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest,
-				const char *name)
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+				u32 mask, u8 idlest, const char *name)
 {
 	int i = 0, ena = 0;
 
 	ena = (idlest) ? 0 : mask;
 
-	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+	omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
 			  MAX_MODULE_ENABLE_WAIT, i);
 
 	if (i < MAX_MODULE_ENABLE_WAIT)
@@ -163,7 +163,7 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 	/* Not all modules have multiple clocks that their IDLEST depends on */
 	if (clk->ops->find_companion) {
 		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+		if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
 			return;
 	}
 
@@ -171,8 +171,8 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 	r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
 	if (r) {
 		/* IDLEST register not in the CM module */
-		_wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val,
-				     __clk_get_name(clk->hw.clk));
+		_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+				     idlest_val, __clk_get_name(clk->hw.clk));
 	} else {
 		cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
 	};
@@ -334,13 +334,13 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
 	}
 
 	/* FIXME should not have INVERT_ENABLE bit here */
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
 		v &= ~(1 << clk->enable_bit);
 	else
 		v |= (1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
-	v = __raw_readl(clk->enable_reg); /* OCP barrier */
+	omap2_clk_writel(v, clk, clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
 
 	if (clk->ops && clk->ops->find_idlest)
 		_omap2_module_wait_ready(clk);
@@ -378,12 +378,12 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
 		return;
 	}
 
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
 		v |= (1 << clk->enable_bit);
 	else
 		v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
+	omap2_clk_writel(v, clk, clk->enable_reg);
 	/* No OCP barrier needed here since it is a disable operation */
 
 	if (clkdm_control && clk->clkdm)
@@ -479,7 +479,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 v;
 
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 
 	if (clk->flags & INVERT_ENABLE)
 		v ^= BIT(clk->enable_bit);
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index bbd6a3f..91ccb96 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -43,6 +43,7 @@ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 	struct clk_divider *parent;
 	struct clk_hw *parent_hw;
 	u32 dummy_v, orig_v;
+	struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
 	int ret;
 
 	/* Clear PWRDN bit of HSDIVIDER */
@@ -53,15 +54,15 @@ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 
 	/* Restore the dividers */
 	if (!ret) {
-		orig_v = __raw_readl(parent->reg);
+		orig_v = omap2_clk_readl(omap_clk, parent->reg);
 		dummy_v = orig_v;
 
 		/* Write any other value different from the Read value */
 		dummy_v ^= (1 << parent->shift);
-		__raw_writel(dummy_v, parent->reg);
+		omap2_clk_writel(dummy_v, omap_clk, parent->reg);
 
 		/* Write the original divider */
-		__raw_writel(orig_v, parent->reg);
+		omap2_clk_writel(orig_v, omap_clk, parent->reg);
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 3a0296c..3185ced 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -50,10 +50,10 @@ static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
 
 	dd = clk->dpll_data;
 
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= ~dd->enable_mask;
 	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
+	omap2_clk_writel(v, clk, dd->control_reg);
 }
 
 /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -69,8 +69,8 @@ static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
 
 	state <<= __ffs(dd->idlest_mask);
 
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
-	       i < MAX_DPLL_WAIT_TRIES) {
+	while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
+		!= state) && i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
 	}
@@ -147,7 +147,7 @@ static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
 	state <<= __ffs(dd->idlest_mask);
 
 	/* Check if already locked */
-	if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+	if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
 		goto done;
 
 	ai = omap3_dpll_autoidle_read(clk);
@@ -311,14 +311,14 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 	 * only since freqsel field is no longer present on other devices.
 	 */
 	if (cpu_is_omap343x()) {
-		v = __raw_readl(dd->control_reg);
+		v = omap2_clk_readl(clk, dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
-		__raw_writel(v, dd->control_reg);
+		omap2_clk_writel(v, clk, dd->control_reg);
 	}
 
 	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
+	v = omap2_clk_readl(clk, dd->mult_div1_reg);
 	v &= ~(dd->mult_mask | dd->div1_mask);
 	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
 	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
@@ -336,11 +336,11 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 		v |= sd_div << __ffs(dd->sddiv_mask);
 	}
 
-	__raw_writel(v, dd->mult_div1_reg);
+	omap2_clk_writel(v, clk, dd->mult_div1_reg);
 
 	/* Set 4X multiplier and low-power mode */
 	if (dd->m4xen_mask || dd->lpmode_mask) {
-		v = __raw_readl(dd->control_reg);
+		v = omap2_clk_readl(clk, dd->control_reg);
 
 		if (dd->m4xen_mask) {
 			if (dd->last_rounded_m4xen)
@@ -356,7 +356,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 				v &= ~dd->lpmode_mask;
 		}
 
-		__raw_writel(v, dd->control_reg);
+		omap2_clk_writel(v, clk, dd->control_reg);
 	}
 
 	/* We let the clock framework set the other output dividers later */
@@ -554,7 +554,7 @@ u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
 	if (!dd->autoidle_reg)
 		return -EINVAL;
 
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
 
@@ -588,10 +588,10 @@ void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
 	 * optionally enter this mode.
 	 */
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
+	omap2_clk_writel(v, clk, dd->autoidle_reg);
 
 }
 
@@ -614,10 +614,10 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 	if (!dd->autoidle_reg)
 		return;
 
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
+	omap2_clk_writel(v, clk, dd->autoidle_reg);
 
 }
 
@@ -639,6 +639,9 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	struct clk_hw_omap *pclk = NULL;
 	struct clk *parent;
 
+	if (!parent_rate)
+		return 0;
+
 	/* Walk up the parents of clk, looking for a DPLL */
 	do {
 		do {
@@ -660,7 +663,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 
 	WARN_ON(!dd->enable_mask);
 
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
 		rate = parent_rate;
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index d28b0f7..52f9438 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -42,7 +42,7 @@ int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= mask;
 	v >>= __ffs(mask);
 
@@ -61,10 +61,10 @@ void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	/* Clear the bit to allow gatectrl */
 	v &= ~mask;
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 }
 
 void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
@@ -79,10 +79,10 @@ void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	/* Set the bit to deny gatectrl */
 	v |= mask;
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 }
 
 const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
@@ -140,7 +140,7 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
 	rate = omap2_get_dpll_rate(clk);
 
 	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
 		rate *= OMAP4430_REGM4XEN_MULT;
 
-- 
1.7.9.5

[PATCHv10 33/41] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm

[Tero Kristo]

If the main clock for a hwmod is of basic clock type, it is illegal to type
cast this to clk_hw_omap and will result in bogus data. Fixed by checking
the clock flags before attempting the type cast.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 25411e3..9296b69 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -656,6 +656,8 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
 	if (oh->clkdm) {
 		return oh->clkdm;
 	} else if (oh->_clk) {
+		if (__clk_get_flags(oh->_clk) & CLK_IS_BASIC)
+			return NULL;
 		clk = to_clk_hw_omap(__clk_get_hw(oh->_clk));
 		return  clk->clkdm;
 	}
-- 
1.7.9.5

[PATCHv10 33/41] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm

[Tero Kristo]

If the main clock for a hwmod is of basic clock type, it is illegal to type
cast this to clk_hw_omap and will result in bogus data. Fixed by checking
the clock flags before attempting the type cast.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 25411e3..9296b69 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -656,6 +656,8 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
 	if (oh->clkdm) {
 		return oh->clkdm;
 	} else if (oh->_clk) {
+		if (__clk_get_flags(oh->_clk) & CLK_IS_BASIC)
+			return NULL;
 		clk = to_clk_hw_omap(__clk_get_hw(oh->_clk));
 		return  clk->clkdm;
 	}
-- 
1.7.9.5

[PATCHv10 34/41] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name

[Tero Kristo]

DT clocks are mostly missing clkdm info now, and this causes an issue with
counter32k which makes its slave idlemode wrong and prevents core idle.

Fixed by initializing the hwmod clkdm pointers for omap3 also which makes
sure the clkdm flag matching logic works properly.

This patch also changes the return value for _init_clkdm to 0 for
incorrect clkdm_name, as this a warning, not a fatal error.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9296b69..d0cf926 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1546,7 +1546,7 @@ static int _init_clkdm(struct omap_hwmod *oh)
 	if (!oh->clkdm) {
 		pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
 			oh->name, oh->clkdm_name);
-		return -EINVAL;
+		return 0;
 	}
 
 	pr_debug("omap_hwmod: %s: associated to clkdm %s\n",
@@ -4136,6 +4136,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
 	} else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
-- 
1.7.9.5

[PATCHv10 34/41] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name

[Tero Kristo]

DT clocks are mostly missing clkdm info now, and this causes an issue with
counter32k which makes its slave idlemode wrong and prevents core idle.

Fixed by initializing the hwmod clkdm pointers for omap3 also which makes
sure the clkdm flag matching logic works properly.

This patch also changes the return value for _init_clkdm to 0 for
incorrect clkdm_name, as this a warning, not a fatal error.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9296b69..d0cf926 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1546,7 +1546,7 @@ static int _init_clkdm(struct omap_hwmod *oh)
 	if (!oh->clkdm) {
 		pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
 			oh->name, oh->clkdm_name);
-		return -EINVAL;
+		return 0;
 	}
 
 	pr_debug("omap_hwmod: %s: associated to clkdm %s\n",
@@ -4136,6 +4136,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
 	} else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
-- 
1.7.9.5

[PATCHv10 35/41] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT

[Tero Kristo]

This patch provides top level functionality for the DT clock initialization.
Clock tree is initialized hierarchically starting from IP modules (CM/PRM/PRCM)
going down towards individual clock nodes, and finally initializing
clockdomains once all the clocks are ready.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/Kconfig      |    1 +
 arch/arm/mach-omap2/clock.h      |    2 +
 arch/arm/mach-omap2/prm.h        |    1 +
 arch/arm/mach-omap2/prm_common.c |  128 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 132 insertions(+)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dc21df1..4fccbbe 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -95,6 +95,7 @@ config ARCH_OMAP2PLUS
 	select SPARSE_IRQ
 	select TI_PRIV_EDMA
 	select USE_OF
+	select REGMAP_MMIO
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9595d72..10efab8 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -291,6 +291,8 @@ extern const struct clksel_rate div_1_3_rates[];
 extern const struct clksel_rate div_1_4_rates[];
 extern const struct clksel_rate div31_1to31_rates[];
 
+extern struct regmap *clk_regmaps[];
+
 extern int am33xx_clk_init(void);
 
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ac25ae6..623db40 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -18,6 +18,7 @@
 # ifndef __ASSEMBLER__
 extern void __iomem *prm_base;
 extern void omap2_set_globals_prm(void __iomem *prm);
+int of_prcm_init(void);
 # endif
 
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index a2e1174..16ab63c 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -23,6 +23,12 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
 
 #include "soc.h"
 #include "prm2xxx_3xxx.h"
@@ -30,6 +36,7 @@
 #include "prm3xxx.h"
 #include "prm44xx.h"
 #include "common.h"
+#include "clock.h"
 
 /*
  * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
@@ -464,3 +471,124 @@ int prm_unregister(struct prm_ll_data *pld)
 
 	return 0;
 }
+
+static struct of_device_id omap_prcm_dt_match_table[] = {
+	{ .compatible = "ti,clock-master" },
+	{ }
+};
+
+static struct regmap_config ti_clk_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.cache_type = REGCACHE_NONE,
+};
+
+static LIST_HEAD(prcm_early_devs);
+
+struct prcm_early_dev {
+	struct device_node *node;
+	struct platform_device *dev;
+	struct list_head link;
+};
+
+static struct clk_hw_omap regmap_dummy_ck = {
+	.flags = REGMAP_ADDRESSING,
+};
+
+static u32 prm_clk_readl(u32 *reg)
+{
+	return omap2_clk_readl(&regmap_dummy_ck, reg);
+}
+
+static void prm_clk_writel(u32 val, u32 *reg)
+{
+	omap2_clk_writel(val, &regmap_dummy_ck, reg);
+}
+
+static struct clk_reg_ops omap_clk_reg_ops = {
+	.clk_readl = prm_clk_readl,
+	.clk_writel = prm_clk_writel,
+};
+
+int __init of_prcm_init(void)
+{
+	struct device_node *np;
+	void __iomem *mem;
+	struct regmap *regmap;
+	struct platform_device *pdev;
+	struct prcm_early_dev *edev;
+	int regmap_index = 0;
+
+	clk_register_reg_ops(&omap_clk_reg_ops);
+
+	for_each_matching_node(np, omap_prcm_dt_match_table) {
+		pdev = platform_device_alloc(np->name, 0);
+		dev_set_name(&pdev->dev, "%s", pdev->name);
+		edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+		edev->dev = pdev;
+		edev->node = np;
+		list_add(&edev->link, &prcm_early_devs);
+		mem = of_iomap(np, 0);
+		ti_clk_regmap_config.name = "0";
+		regmap = regmap_init_mmio(&pdev->dev, mem,
+					  &ti_clk_regmap_config);
+		clk_regmaps[regmap_index] = regmap;
+		ti_dt_clk_init_provider(np, regmap_index);
+		regmap_index++;
+	}
+
+	ti_dt_clockdomains_setup();
+
+	return 0;
+}
+
+static int prcm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+		of_match_device(omap_prcm_dt_match_table, &pdev->dev);
+	struct prcm_early_dev *edev;
+	int ret;
+
+	if (!of_id)
+		return 0;
+
+	list_for_each_entry(edev, &prcm_early_devs, link) {
+		if (edev->node == pdev->dev.of_node) {
+			platform_device_add(edev->dev);
+			edev->dev->dev.driver = pdev->dev.driver;
+			ret = device_bind_driver(&edev->dev->dev);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int prcm_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver prcm_driver = {
+	.probe		= prcm_probe,
+	.remove		= prcm_remove,
+	.driver		= {
+		.name	= "prcm-driver",
+		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(omap_prcm_dt_match_table),
+	},
+};
+
+static __init int prcm_init(void)
+{
+	return platform_driver_register(&prcm_driver);
+}
+
+static __exit void prcm_exit(void)
+{
+	platform_driver_unregister(&prcm_driver);
+}
+omap_postcore_initcall(prcm_init);
+module_exit(prcm_exit);
-- 
1.7.9.5

[PATCHv10 35/41] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT

[Tero Kristo]

This patch provides top level functionality for the DT clock initialization.
Clock tree is initialized hierarchically starting from IP modules (CM/PRM/PRCM)
going down towards individual clock nodes, and finally initializing
clockdomains once all the clocks are ready.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/Kconfig      |    1 +
 arch/arm/mach-omap2/clock.h      |    2 +
 arch/arm/mach-omap2/prm.h        |    1 +
 arch/arm/mach-omap2/prm_common.c |  128 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 132 insertions(+)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dc21df1..4fccbbe 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -95,6 +95,7 @@ config ARCH_OMAP2PLUS
 	select SPARSE_IRQ
 	select TI_PRIV_EDMA
 	select USE_OF
+	select REGMAP_MMIO
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9595d72..10efab8 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -291,6 +291,8 @@ extern const struct clksel_rate div_1_3_rates[];
 extern const struct clksel_rate div_1_4_rates[];
 extern const struct clksel_rate div31_1to31_rates[];
 
+extern struct regmap *clk_regmaps[];
+
 extern int am33xx_clk_init(void);
 
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ac25ae6..623db40 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -18,6 +18,7 @@
 # ifndef __ASSEMBLER__
 extern void __iomem *prm_base;
 extern void omap2_set_globals_prm(void __iomem *prm);
+int of_prcm_init(void);
 # endif
 
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index a2e1174..16ab63c 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -23,6 +23,12 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
 
 #include "soc.h"
 #include "prm2xxx_3xxx.h"
@@ -30,6 +36,7 @@
 #include "prm3xxx.h"
 #include "prm44xx.h"
 #include "common.h"
+#include "clock.h"
 
 /*
  * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
@@ -464,3 +471,124 @@ int prm_unregister(struct prm_ll_data *pld)
 
 	return 0;
 }
+
+static struct of_device_id omap_prcm_dt_match_table[] = {
+	{ .compatible = "ti,clock-master" },
+	{ }
+};
+
+static struct regmap_config ti_clk_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.cache_type = REGCACHE_NONE,
+};
+
+static LIST_HEAD(prcm_early_devs);
+
+struct prcm_early_dev {
+	struct device_node *node;
+	struct platform_device *dev;
+	struct list_head link;
+};
+
+static struct clk_hw_omap regmap_dummy_ck = {
+	.flags = REGMAP_ADDRESSING,
+};
+
+static u32 prm_clk_readl(u32 *reg)
+{
+	return omap2_clk_readl(&regmap_dummy_ck, reg);
+}
+
+static void prm_clk_writel(u32 val, u32 *reg)
+{
+	omap2_clk_writel(val, &regmap_dummy_ck, reg);
+}
+
+static struct clk_reg_ops omap_clk_reg_ops = {
+	.clk_readl = prm_clk_readl,
+	.clk_writel = prm_clk_writel,
+};
+
+int __init of_prcm_init(void)
+{
+	struct device_node *np;
+	void __iomem *mem;
+	struct regmap *regmap;
+	struct platform_device *pdev;
+	struct prcm_early_dev *edev;
+	int regmap_index = 0;
+
+	clk_register_reg_ops(&omap_clk_reg_ops);
+
+	for_each_matching_node(np, omap_prcm_dt_match_table) {
+		pdev = platform_device_alloc(np->name, 0);
+		dev_set_name(&pdev->dev, "%s", pdev->name);
+		edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+		edev->dev = pdev;
+		edev->node = np;
+		list_add(&edev->link, &prcm_early_devs);
+		mem = of_iomap(np, 0);
+		ti_clk_regmap_config.name = "0";
+		regmap = regmap_init_mmio(&pdev->dev, mem,
+					  &ti_clk_regmap_config);
+		clk_regmaps[regmap_index] = regmap;
+		ti_dt_clk_init_provider(np, regmap_index);
+		regmap_index++;
+	}
+
+	ti_dt_clockdomains_setup();
+
+	return 0;
+}
+
+static int prcm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+		of_match_device(omap_prcm_dt_match_table, &pdev->dev);
+	struct prcm_early_dev *edev;
+	int ret;
+
+	if (!of_id)
+		return 0;
+
+	list_for_each_entry(edev, &prcm_early_devs, link) {
+		if (edev->node == pdev->dev.of_node) {
+			platform_device_add(edev->dev);
+			edev->dev->dev.driver = pdev->dev.driver;
+			ret = device_bind_driver(&edev->dev->dev);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int prcm_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver prcm_driver = {
+	.probe		= prcm_probe,
+	.remove		= prcm_remove,
+	.driver		= {
+		.name	= "prcm-driver",
+		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(omap_prcm_dt_match_table),
+	},
+};
+
+static __init int prcm_init(void)
+{
+	return platform_driver_register(&prcm_driver);
+}
+
+static __exit void prcm_exit(void)
+{
+	platform_driver_unregister(&prcm_driver);
+}
+omap_postcore_initcall(prcm_init);
+module_exit(prcm_exit);
-- 
1.7.9.5

[PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Tero Kristo]

Some OMAP clocks require knowledge about their parent clockdomain for
book keeping purposes. This patch creates a new DT binding for TI
clockdomains, which act as a collection of device clocks.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
 arch/arm/mach-omap2/clock.h                        |    1 -
 drivers/clk/ti/Makefile                            |    3 +-
 drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    3 +
 5 files changed, 96 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 create mode 100644 drivers/clk/ti/clockdomain.c

diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
new file mode 100644
index 0000000..45e6f7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -0,0 +1,21 @@
+Binding for Texas Instruments clockdomain.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. Every clock on
+TI SoC belongs to one clockdomain, but software only needs this
+information for specific clocks which require their parent
+clockdomain to be controlled when the clock is enabled/disabled.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,clockdomain"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of clocks within this domain
+
+Examples:
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index bc0f9fc..6bd72b5 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -38,7 +38,6 @@ struct omap_clk {
 	}
 
 struct clockdomain;
-#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
 
 #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)	\
 	static struct clk _name = {				\
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 7cba389..67056fb 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,5 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   fixed-factor.o gate.o composite.o
+					   fixed-factor.o gate.o clockdomain.o \
+					   composite.o
 endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
new file mode 100644
index 0000000..f1e0038
--- /dev/null
+++ b/drivers/clk/ti/clockdomain.c
@@ -0,0 +1,70 @@
+/*
+ * OMAP clockdomain support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static void __init of_ti_clockdomain_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_hw *clk_hw;
+	const char *clkdm_name = node->name;
+	int i;
+	int num_clks;
+
+	num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
+
+	for (i = 0; i < num_clks; i++) {
+		clk = of_clk_get(node, i);
+		if (__clk_get_flags(clk) & CLK_IS_BASIC) {
+			pr_warn("can't setup clkdm for basic clk %s\n",
+				__clk_get_name(clk));
+			continue;
+		}
+		clk_hw = __clk_get_hw(clk);
+		to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
+		omap2_init_clk_clkdm(clk_hw);
+	}
+}
+
+static struct of_device_id ti_clkdm_match_table[] __initdata = {
+	{ .compatible = "ti,clockdomain" },
+	{ }
+};
+
+/**
+ * ti_dt_clockdomains_setup - setup device tree clockdomains
+ *
+ * Initializes clockdomain nodes for a SoC. This parses through all the
+ * nodes with compatible = "ti,clockdomain", and add the clockdomain
+ * info for all the clocks listed under these. This function shall be
+ * called after rest of the DT clock init has completed and all
+ * clock nodes have been registered.
+ */
+void __init ti_dt_clockdomains_setup(void)
+{
+	struct device_node *np;
+	for_each_matching_node(np, ti_clkdm_match_table) {
+		of_ti_clockdomain_setup(np);
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 872ff2a..231b071 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -204,6 +204,8 @@ struct clk_omap_reg {
 	u16 index;
 };
 
+#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
+
 void omap2_init_clk_hw_omap_clocks(struct clk *clk);
 int omap3_noncore_dpll_enable(struct clk_hw *hw);
 void omap3_noncore_dpll_disable(struct clk_hw *hw);
@@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
+void ti_dt_clockdomains_setup(void);
 int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Tero Kristo]

Some OMAP clocks require knowledge about their parent clockdomain for
book keeping purposes. This patch creates a new DT binding for TI
clockdomains, which act as a collection of device clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
 arch/arm/mach-omap2/clock.h                        |    1 -
 drivers/clk/ti/Makefile                            |    3 +-
 drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    3 +
 5 files changed, 96 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 create mode 100644 drivers/clk/ti/clockdomain.c

diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
new file mode 100644
index 0000000..45e6f7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -0,0 +1,21 @@
+Binding for Texas Instruments clockdomain.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. Every clock on
+TI SoC belongs to one clockdomain, but software only needs this
+information for specific clocks which require their parent
+clockdomain to be controlled when the clock is enabled/disabled.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,clockdomain"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of clocks within this domain
+
+Examples:
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index bc0f9fc..6bd72b5 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -38,7 +38,6 @@ struct omap_clk {
 	}
 
 struct clockdomain;
-#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
 
 #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)	\
 	static struct clk _name = {				\
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 7cba389..67056fb 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,5 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   fixed-factor.o gate.o composite.o
+					   fixed-factor.o gate.o clockdomain.o \
+					   composite.o
 endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
new file mode 100644
index 0000000..f1e0038
--- /dev/null
+++ b/drivers/clk/ti/clockdomain.c
@@ -0,0 +1,70 @@
+/*
+ * OMAP clockdomain support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static void __init of_ti_clockdomain_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_hw *clk_hw;
+	const char *clkdm_name = node->name;
+	int i;
+	int num_clks;
+
+	num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
+
+	for (i = 0; i < num_clks; i++) {
+		clk = of_clk_get(node, i);
+		if (__clk_get_flags(clk) & CLK_IS_BASIC) {
+			pr_warn("can't setup clkdm for basic clk %s\n",
+				__clk_get_name(clk));
+			continue;
+		}
+		clk_hw = __clk_get_hw(clk);
+		to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
+		omap2_init_clk_clkdm(clk_hw);
+	}
+}
+
+static struct of_device_id ti_clkdm_match_table[] __initdata = {
+	{ .compatible = "ti,clockdomain" },
+	{ }
+};
+
+/**
+ * ti_dt_clockdomains_setup - setup device tree clockdomains
+ *
+ * Initializes clockdomain nodes for a SoC. This parses through all the
+ * nodes with compatible = "ti,clockdomain", and add the clockdomain
+ * info for all the clocks listed under these. This function shall be
+ * called after rest of the DT clock init has completed and all
+ * clock nodes have been registered.
+ */
+void __init ti_dt_clockdomains_setup(void)
+{
+	struct device_node *np;
+	for_each_matching_node(np, ti_clkdm_match_table) {
+		of_ti_clockdomain_setup(np);
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 872ff2a..231b071 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -204,6 +204,8 @@ struct clk_omap_reg {
 	u16 index;
 };
 
+#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
+
 void omap2_init_clk_hw_omap_clocks(struct clk *clk);
 int omap3_noncore_dpll_enable(struct clk_hw *hw);
 void omap3_noncore_dpll_disable(struct clk_hw *hw);
@@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
+void ti_dt_clockdomains_setup(void);
 int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
-- 
1.7.9.5

Re: [PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Mike Turquette]

Quoting Tero Kristo (2013-11-26 00:05:51)
> Some OMAP clocks require knowledge about their parent clockdomain for
> book keeping purposes. This patch creates a new DT binding for TI
> clockdomains, which act as a collection of device clocks.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
>  arch/arm/mach-omap2/clock.h                        |    1 -
>  drivers/clk/ti/Makefile                            |    3 +-
>  drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
>  include/linux/clk/ti.h                             |    3 +
>  5 files changed, 96 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>  create mode 100644 drivers/clk/ti/clockdomain.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> new file mode 100644
> index 0000000..45e6f7c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> @@ -0,0 +1,21 @@
> +Binding for Texas Instruments clockdomain.
> +
> +Binding status: Unstable - ABI compatibility may be broken in the future
> +
> +This binding uses the common clock binding[1]. Every clock on

The patch looks fine to me but I think that the binding description
should capture the fact that you are re-using the common clock binding
but that this binding definition does not define any new clocks or clock
controllers in the way that a typical clock binding would.

This code uses the 'clocks' property the same way that any other
consumer binding definition would, such as an MMC controller or UART.
Those bindings do not say that they are based on the common clock
binding AFAIK.

Regards,
Mike

> +TI SoC belongs to one clockdomain, but software only needs this
> +information for specific clocks which require their parent
> +clockdomain to be controlled when the clock is enabled/disabled.
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be "ti,clockdomain"
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : link phandles of clocks within this domain
> +
> +Examples:
> +       dss_clkdm: dss_clkdm {
> +               compatible = "ti,clockdomain";
> +               clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
> +       };
> diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
> index bc0f9fc..6bd72b5 100644
> --- a/arch/arm/mach-omap2/clock.h
> +++ b/arch/arm/mach-omap2/clock.h
> @@ -38,7 +38,6 @@ struct omap_clk {
>         }
>  
>  struct clockdomain;
> -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
>  
>  #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)     \
>         static struct clk _name = {                             \
> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
> index 7cba389..67056fb 100644
> --- a/drivers/clk/ti/Makefile
> +++ b/drivers/clk/ti/Makefile
> @@ -1,4 +1,5 @@
>  ifneq ($(CONFIG_OF),)
>  obj-y                                  += clk.o dpll.o autoidle.o divider.o \
> -                                          fixed-factor.o gate.o composite.o
> +                                          fixed-factor.o gate.o clockdomain.o \
> +                                          composite.o
>  endif
> diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
> new file mode 100644
> index 0000000..f1e0038
> --- /dev/null
> +++ b/drivers/clk/ti/clockdomain.c
> @@ -0,0 +1,70 @@
> +/*
> + * OMAP clockdomain support
> + *
> + * Copyright (C) 2013 Texas Instruments, Inc.
> + *
> + * Tero Kristo <t-kristo@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/clk/ti.h>
> +
> +#undef pr_fmt
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> +static void __init of_ti_clockdomain_setup(struct device_node *node)
> +{
> +       struct clk *clk;
> +       struct clk_hw *clk_hw;
> +       const char *clkdm_name = node->name;
> +       int i;
> +       int num_clks;
> +
> +       num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
> +
> +       for (i = 0; i < num_clks; i++) {
> +               clk = of_clk_get(node, i);
> +               if (__clk_get_flags(clk) & CLK_IS_BASIC) {
> +                       pr_warn("can't setup clkdm for basic clk %s\n",
> +                               __clk_get_name(clk));
> +                       continue;
> +               }
> +               clk_hw = __clk_get_hw(clk);
> +               to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
> +               omap2_init_clk_clkdm(clk_hw);
> +       }
> +}
> +
> +static struct of_device_id ti_clkdm_match_table[] __initdata = {
> +       { .compatible = "ti,clockdomain" },
> +       { }
> +};
> +
> +/**
> + * ti_dt_clockdomains_setup - setup device tree clockdomains
> + *
> + * Initializes clockdomain nodes for a SoC. This parses through all the
> + * nodes with compatible = "ti,clockdomain", and add the clockdomain
> + * info for all the clocks listed under these. This function shall be
> + * called after rest of the DT clock init has completed and all
> + * clock nodes have been registered.
> + */
> +void __init ti_dt_clockdomains_setup(void)
> +{
> +       struct device_node *np;
> +       for_each_matching_node(np, ti_clkdm_match_table) {
> +               of_ti_clockdomain_setup(np);
> +       }
> +}
> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> index 872ff2a..231b071 100644
> --- a/include/linux/clk/ti.h
> +++ b/include/linux/clk/ti.h
> @@ -204,6 +204,8 @@ struct clk_omap_reg {
>         u16 index;
>  };
>  
> +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
> +
>  void omap2_init_clk_hw_omap_clocks(struct clk *clk);
>  int omap3_noncore_dpll_enable(struct clk_hw *hw);
>  void omap3_noncore_dpll_disable(struct clk_hw *hw);
> @@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
>  void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>  void ti_dt_clocks_register(struct ti_dt_clk *oclks);
>  void ti_dt_clk_init_provider(struct device_node *np, int index);
> +void ti_dt_clockdomains_setup(void);
>  int of_ti_clk_autoidle_setup(struct device_node *node);
>  int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
>  
> -- 
> 1.7.9.5
> 

[PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Mike Turquette]

Quoting Tero Kristo (2013-11-26 00:05:51)
> Some OMAP clocks require knowledge about their parent clockdomain for
> book keeping purposes. This patch creates a new DT binding for TI
> clockdomains, which act as a collection of device clocks.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
>  arch/arm/mach-omap2/clock.h                        |    1 -
>  drivers/clk/ti/Makefile                            |    3 +-
>  drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
>  include/linux/clk/ti.h                             |    3 +
>  5 files changed, 96 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>  create mode 100644 drivers/clk/ti/clockdomain.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> new file mode 100644
> index 0000000..45e6f7c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> @@ -0,0 +1,21 @@
> +Binding for Texas Instruments clockdomain.
> +
> +Binding status: Unstable - ABI compatibility may be broken in the future
> +
> +This binding uses the common clock binding[1]. Every clock on

The patch looks fine to me but I think that the binding description
should capture the fact that you are re-using the common clock binding
but that this binding definition does not define any new clocks or clock
controllers in the way that a typical clock binding would.

This code uses the 'clocks' property the same way that any other
consumer binding definition would, such as an MMC controller or UART.
Those bindings do not say that they are based on the common clock
binding AFAIK.

Regards,
Mike

> +TI SoC belongs to one clockdomain, but software only needs this
> +information for specific clocks which require their parent
> +clockdomain to be controlled when the clock is enabled/disabled.
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be "ti,clockdomain"
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : link phandles of clocks within this domain
> +
> +Examples:
> +       dss_clkdm: dss_clkdm {
> +               compatible = "ti,clockdomain";
> +               clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
> +       };
> diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
> index bc0f9fc..6bd72b5 100644
> --- a/arch/arm/mach-omap2/clock.h
> +++ b/arch/arm/mach-omap2/clock.h
> @@ -38,7 +38,6 @@ struct omap_clk {
>         }
>  
>  struct clockdomain;
> -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
>  
>  #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)     \
>         static struct clk _name = {                             \
> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
> index 7cba389..67056fb 100644
> --- a/drivers/clk/ti/Makefile
> +++ b/drivers/clk/ti/Makefile
> @@ -1,4 +1,5 @@
>  ifneq ($(CONFIG_OF),)
>  obj-y                                  += clk.o dpll.o autoidle.o divider.o \
> -                                          fixed-factor.o gate.o composite.o
> +                                          fixed-factor.o gate.o clockdomain.o \
> +                                          composite.o
>  endif
> diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
> new file mode 100644
> index 0000000..f1e0038
> --- /dev/null
> +++ b/drivers/clk/ti/clockdomain.c
> @@ -0,0 +1,70 @@
> +/*
> + * OMAP clockdomain support
> + *
> + * Copyright (C) 2013 Texas Instruments, Inc.
> + *
> + * Tero Kristo <t-kristo@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/clk/ti.h>
> +
> +#undef pr_fmt
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> +static void __init of_ti_clockdomain_setup(struct device_node *node)
> +{
> +       struct clk *clk;
> +       struct clk_hw *clk_hw;
> +       const char *clkdm_name = node->name;
> +       int i;
> +       int num_clks;
> +
> +       num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
> +
> +       for (i = 0; i < num_clks; i++) {
> +               clk = of_clk_get(node, i);
> +               if (__clk_get_flags(clk) & CLK_IS_BASIC) {
> +                       pr_warn("can't setup clkdm for basic clk %s\n",
> +                               __clk_get_name(clk));
> +                       continue;
> +               }
> +               clk_hw = __clk_get_hw(clk);
> +               to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
> +               omap2_init_clk_clkdm(clk_hw);
> +       }
> +}
> +
> +static struct of_device_id ti_clkdm_match_table[] __initdata = {
> +       { .compatible = "ti,clockdomain" },
> +       { }
> +};
> +
> +/**
> + * ti_dt_clockdomains_setup - setup device tree clockdomains
> + *
> + * Initializes clockdomain nodes for a SoC. This parses through all the
> + * nodes with compatible = "ti,clockdomain", and add the clockdomain
> + * info for all the clocks listed under these. This function shall be
> + * called after rest of the DT clock init has completed and all
> + * clock nodes have been registered.
> + */
> +void __init ti_dt_clockdomains_setup(void)
> +{
> +       struct device_node *np;
> +       for_each_matching_node(np, ti_clkdm_match_table) {
> +               of_ti_clockdomain_setup(np);
> +       }
> +}
> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> index 872ff2a..231b071 100644
> --- a/include/linux/clk/ti.h
> +++ b/include/linux/clk/ti.h
> @@ -204,6 +204,8 @@ struct clk_omap_reg {
>         u16 index;
>  };
>  
> +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
> +
>  void omap2_init_clk_hw_omap_clocks(struct clk *clk);
>  int omap3_noncore_dpll_enable(struct clk_hw *hw);
>  void omap3_noncore_dpll_disable(struct clk_hw *hw);
> @@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
>  void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>  void ti_dt_clocks_register(struct ti_dt_clk *oclks);
>  void ti_dt_clk_init_provider(struct device_node *np, int index);
> +void ti_dt_clockdomains_setup(void);
>  int of_ti_clk_autoidle_setup(struct device_node *node);
>  int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
>  
> -- 
> 1.7.9.5
> 

Re: [PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Tero Kristo]

On 12/15/2013 06:23 AM, Mike Turquette wrote:
> Quoting Tero Kristo (2013-11-26 00:05:51)
>> Some OMAP clocks require knowledge about their parent clockdomain for
>> book keeping purposes. This patch creates a new DT binding for TI
>> clockdomains, which act as a collection of device clocks.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
>>   arch/arm/mach-omap2/clock.h                        |    1 -
>>   drivers/clk/ti/Makefile                            |    3 +-
>>   drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
>>   include/linux/clk/ti.h                             |    3 +
>>   5 files changed, 96 insertions(+), 2 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>>   create mode 100644 drivers/clk/ti/clockdomain.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>> new file mode 100644
>> index 0000000..45e6f7c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>> @@ -0,0 +1,21 @@
>> +Binding for Texas Instruments clockdomain.
>> +
>> +Binding status: Unstable - ABI compatibility may be broken in the future
>> +
>> +This binding uses the common clock binding[1]. Every clock on
>
> The patch looks fine to me but I think that the binding description
> should capture the fact that you are re-using the common clock binding
> but that this binding definition does not define any new clocks or clock
> controllers in the way that a typical clock binding would.
>
> This code uses the 'clocks' property the same way that any other
> consumer binding definition would, such as an MMC controller or UART.
> Those bindings do not say that they are based on the common clock
> binding AFAIK.
>

Ok, will modify the doc accordingly.

-Tero

> Regards,
> Mike
>
>> +TI SoC belongs to one clockdomain, but software only needs this
>> +information for specific clocks which require their parent
>> +clockdomain to be controlled when the clock is enabled/disabled.
>> +
>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +
>> +Required properties:
>> +- compatible : shall be "ti,clockdomain"
>> +- #clock-cells : from common clock binding; shall be set to 0.
>> +- clocks : link phandles of clocks within this domain
>> +
>> +Examples:
>> +       dss_clkdm: dss_clkdm {
>> +               compatible = "ti,clockdomain";
>> +               clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
>> +       };
>> diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
>> index bc0f9fc..6bd72b5 100644
>> --- a/arch/arm/mach-omap2/clock.h
>> +++ b/arch/arm/mach-omap2/clock.h
>> @@ -38,7 +38,6 @@ struct omap_clk {
>>          }
>>
>>   struct clockdomain;
>> -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
>>
>>   #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)     \
>>          static struct clk _name = {                             \
>> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
>> index 7cba389..67056fb 100644
>> --- a/drivers/clk/ti/Makefile
>> +++ b/drivers/clk/ti/Makefile
>> @@ -1,4 +1,5 @@
>>   ifneq ($(CONFIG_OF),)
>>   obj-y                                  += clk.o dpll.o autoidle.o divider.o \
>> -                                          fixed-factor.o gate.o composite.o
>> +                                          fixed-factor.o gate.o clockdomain.o \
>> +                                          composite.o
>>   endif
>> diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
>> new file mode 100644
>> index 0000000..f1e0038
>> --- /dev/null
>> +++ b/drivers/clk/ti/clockdomain.c
>> @@ -0,0 +1,70 @@
>> +/*
>> + * OMAP clockdomain support
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + *
>> + * Tero Kristo <t-kristo@ti.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/clk/ti.h>
>> +
>> +#undef pr_fmt
>> +#define pr_fmt(fmt) "%s: " fmt, __func__
>> +
>> +static void __init of_ti_clockdomain_setup(struct device_node *node)
>> +{
>> +       struct clk *clk;
>> +       struct clk_hw *clk_hw;
>> +       const char *clkdm_name = node->name;
>> +       int i;
>> +       int num_clks;
>> +
>> +       num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
>> +
>> +       for (i = 0; i < num_clks; i++) {
>> +               clk = of_clk_get(node, i);
>> +               if (__clk_get_flags(clk) & CLK_IS_BASIC) {
>> +                       pr_warn("can't setup clkdm for basic clk %s\n",
>> +                               __clk_get_name(clk));
>> +                       continue;
>> +               }
>> +               clk_hw = __clk_get_hw(clk);
>> +               to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
>> +               omap2_init_clk_clkdm(clk_hw);
>> +       }
>> +}
>> +
>> +static struct of_device_id ti_clkdm_match_table[] __initdata = {
>> +       { .compatible = "ti,clockdomain" },
>> +       { }
>> +};
>> +
>> +/**
>> + * ti_dt_clockdomains_setup - setup device tree clockdomains
>> + *
>> + * Initializes clockdomain nodes for a SoC. This parses through all the
>> + * nodes with compatible = "ti,clockdomain", and add the clockdomain
>> + * info for all the clocks listed under these. This function shall be
>> + * called after rest of the DT clock init has completed and all
>> + * clock nodes have been registered.
>> + */
>> +void __init ti_dt_clockdomains_setup(void)
>> +{
>> +       struct device_node *np;
>> +       for_each_matching_node(np, ti_clkdm_match_table) {
>> +               of_ti_clockdomain_setup(np);
>> +       }
>> +}
>> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
>> index 872ff2a..231b071 100644
>> --- a/include/linux/clk/ti.h
>> +++ b/include/linux/clk/ti.h
>> @@ -204,6 +204,8 @@ struct clk_omap_reg {
>>          u16 index;
>>   };
>>
>> +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
>> +
>>   void omap2_init_clk_hw_omap_clocks(struct clk *clk);
>>   int omap3_noncore_dpll_enable(struct clk_hw *hw);
>>   void omap3_noncore_dpll_disable(struct clk_hw *hw);
>> @@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
>>   void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>>   void ti_dt_clocks_register(struct ti_dt_clk *oclks);
>>   void ti_dt_clk_init_provider(struct device_node *np, int index);
>> +void ti_dt_clockdomains_setup(void);
>>   int of_ti_clk_autoidle_setup(struct device_node *node);
>>   int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
>>
>> --
>> 1.7.9.5
>>

[PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Tero Kristo]

On 12/15/2013 06:23 AM, Mike Turquette wrote:
> Quoting Tero Kristo (2013-11-26 00:05:51)
>> Some OMAP clocks require knowledge about their parent clockdomain for
>> book keeping purposes. This patch creates a new DT binding for TI
>> clockdomains, which act as a collection of device clocks.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
>>   arch/arm/mach-omap2/clock.h                        |    1 -
>>   drivers/clk/ti/Makefile                            |    3 +-
>>   drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
>>   include/linux/clk/ti.h                             |    3 +
>>   5 files changed, 96 insertions(+), 2 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>>   create mode 100644 drivers/clk/ti/clockdomain.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>> new file mode 100644
>> index 0000000..45e6f7c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>> @@ -0,0 +1,21 @@
>> +Binding for Texas Instruments clockdomain.
>> +
>> +Binding status: Unstable - ABI compatibility may be broken in the future
>> +
>> +This binding uses the common clock binding[1]. Every clock on
>
> The patch looks fine to me but I think that the binding description
> should capture the fact that you are re-using the common clock binding
> but that this binding definition does not define any new clocks or clock
> controllers in the way that a typical clock binding would.
>
> This code uses the 'clocks' property the same way that any other
> consumer binding definition would, such as an MMC controller or UART.
> Those bindings do not say that they are based on the common clock
> binding AFAIK.
>

Ok, will modify the doc accordingly.

-Tero

> Regards,
> Mike
>
>> +TI SoC belongs to one clockdomain, but software only needs this
>> +information for specific clocks which require their parent
>> +clockdomain to be controlled when the clock is enabled/disabled.
>> +
>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +
>> +Required properties:
>> +- compatible : shall be "ti,clockdomain"
>> +- #clock-cells : from common clock binding; shall be set to 0.
>> +- clocks : link phandles of clocks within this domain
>> +
>> +Examples:
>> +       dss_clkdm: dss_clkdm {
>> +               compatible = "ti,clockdomain";
>> +               clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
>> +       };
>> diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
>> index bc0f9fc..6bd72b5 100644
>> --- a/arch/arm/mach-omap2/clock.h
>> +++ b/arch/arm/mach-omap2/clock.h
>> @@ -38,7 +38,6 @@ struct omap_clk {
>>          }
>>
>>   struct clockdomain;
>> -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
>>
>>   #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)     \
>>          static struct clk _name = {                             \
>> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
>> index 7cba389..67056fb 100644
>> --- a/drivers/clk/ti/Makefile
>> +++ b/drivers/clk/ti/Makefile
>> @@ -1,4 +1,5 @@
>>   ifneq ($(CONFIG_OF),)
>>   obj-y                                  += clk.o dpll.o autoidle.o divider.o \
>> -                                          fixed-factor.o gate.o composite.o
>> +                                          fixed-factor.o gate.o clockdomain.o \
>> +                                          composite.o
>>   endif
>> diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
>> new file mode 100644
>> index 0000000..f1e0038
>> --- /dev/null
>> +++ b/drivers/clk/ti/clockdomain.c
>> @@ -0,0 +1,70 @@
>> +/*
>> + * OMAP clockdomain support
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + *
>> + * Tero Kristo <t-kristo@ti.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/clk/ti.h>
>> +
>> +#undef pr_fmt
>> +#define pr_fmt(fmt) "%s: " fmt, __func__
>> +
>> +static void __init of_ti_clockdomain_setup(struct device_node *node)
>> +{
>> +       struct clk *clk;
>> +       struct clk_hw *clk_hw;
>> +       const char *clkdm_name = node->name;
>> +       int i;
>> +       int num_clks;
>> +
>> +       num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
>> +
>> +       for (i = 0; i < num_clks; i++) {
>> +               clk = of_clk_get(node, i);
>> +               if (__clk_get_flags(clk) & CLK_IS_BASIC) {
>> +                       pr_warn("can't setup clkdm for basic clk %s\n",
>> +                               __clk_get_name(clk));
>> +                       continue;
>> +               }
>> +               clk_hw = __clk_get_hw(clk);
>> +               to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
>> +               omap2_init_clk_clkdm(clk_hw);
>> +       }
>> +}
>> +
>> +static struct of_device_id ti_clkdm_match_table[] __initdata = {
>> +       { .compatible = "ti,clockdomain" },
>> +       { }
>> +};
>> +
>> +/**
>> + * ti_dt_clockdomains_setup - setup device tree clockdomains
>> + *
>> + * Initializes clockdomain nodes for a SoC. This parses through all the
>> + * nodes with compatible = "ti,clockdomain", and add the clockdomain
>> + * info for all the clocks listed under these. This function shall be
>> + * called after rest of the DT clock init has completed and all
>> + * clock nodes have been registered.
>> + */
>> +void __init ti_dt_clockdomains_setup(void)
>> +{
>> +       struct device_node *np;
>> +       for_each_matching_node(np, ti_clkdm_match_table) {
>> +               of_ti_clockdomain_setup(np);
>> +       }
>> +}
>> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
>> index 872ff2a..231b071 100644
>> --- a/include/linux/clk/ti.h
>> +++ b/include/linux/clk/ti.h
>> @@ -204,6 +204,8 @@ struct clk_omap_reg {
>>          u16 index;
>>   };
>>
>> +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
>> +
>>   void omap2_init_clk_hw_omap_clocks(struct clk *clk);
>>   int omap3_noncore_dpll_enable(struct clk_hw *hw);
>>   void omap3_noncore_dpll_disable(struct clk_hw *hw);
>> @@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
>>   void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>>   void ti_dt_clocks_register(struct ti_dt_clk *oclks);
>>   void ti_dt_clk_init_provider(struct device_node *np, int index);
>> +void ti_dt_clockdomains_setup(void);
>>   int of_ti_clk_autoidle_setup(struct device_node *node);
>>   int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
>>
>> --
>> 1.7.9.5
>>

Re: [PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Mike Turquette]

Quoting Tero Kristo (2013-12-16 00:13:08)
> On 12/15/2013 06:23 AM, Mike Turquette wrote:
> > Quoting Tero Kristo (2013-11-26 00:05:51)
> >> Some OMAP clocks require knowledge about their parent clockdomain for
> >> book keeping purposes. This patch creates a new DT binding for TI
> >> clockdomains, which act as a collection of device clocks.
> >>
> >> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> >> ---
> >>   .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
> >>   arch/arm/mach-omap2/clock.h                        |    1 -
> >>   drivers/clk/ti/Makefile                            |    3 +-
> >>   drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
> >>   include/linux/clk/ti.h                             |    3 +
> >>   5 files changed, 96 insertions(+), 2 deletions(-)
> >>   create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> >>   create mode 100644 drivers/clk/ti/clockdomain.c
> >>
> >> diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> >> new file mode 100644
> >> index 0000000..45e6f7c
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> >> @@ -0,0 +1,21 @@
> >> +Binding for Texas Instruments clockdomain.
> >> +
> >> +Binding status: Unstable - ABI compatibility may be broken in the future
> >> +
> >> +This binding uses the common clock binding[1]. Every clock on
> >
> > The patch looks fine to me but I think that the binding description
> > should capture the fact that you are re-using the common clock binding
> > but that this binding definition does not define any new clocks or clock
> > controllers in the way that a typical clock binding would.
> >
> > This code uses the 'clocks' property the same way that any other
> > consumer binding definition would, such as an MMC controller or UART.
> > Those bindings do not say that they are based on the common clock
> > binding AFAIK.
> >
> 
> Ok, will modify the doc accordingly.

Just to clarify: I think it is great to reference clock-bindings.txt,
but somehow make sure that someone reading this doesn't mistake it for a
clock controller binding or a new clock type binding. This ip sort of
"consumes" clocks in the usual way as an IO controller.

Regards,
Mike

> 
> -Tero
> 
> > Regards,
> > Mike
> >
> >> +TI SoC belongs to one clockdomain, but software only needs this
> >> +information for specific clocks which require their parent
> >> +clockdomain to be controlled when the clock is enabled/disabled.
> >> +
> >> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> >> +
> >> +Required properties:
> >> +- compatible : shall be "ti,clockdomain"
> >> +- #clock-cells : from common clock binding; shall be set to 0.
> >> +- clocks : link phandles of clocks within this domain
> >> +
> >> +Examples:
> >> +       dss_clkdm: dss_clkdm {
> >> +               compatible = "ti,clockdomain";
> >> +               clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
> >> +       };
> >> diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
> >> index bc0f9fc..6bd72b5 100644
> >> --- a/arch/arm/mach-omap2/clock.h
> >> +++ b/arch/arm/mach-omap2/clock.h
> >> @@ -38,7 +38,6 @@ struct omap_clk {
> >>          }
> >>
> >>   struct clockdomain;
> >> -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
> >>
> >>   #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)     \
> >>          static struct clk _name = {                             \
> >> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
> >> index 7cba389..67056fb 100644
> >> --- a/drivers/clk/ti/Makefile
> >> +++ b/drivers/clk/ti/Makefile
> >> @@ -1,4 +1,5 @@
> >>   ifneq ($(CONFIG_OF),)
> >>   obj-y                                  += clk.o dpll.o autoidle.o divider.o \
> >> -                                          fixed-factor.o gate.o composite.o
> >> +                                          fixed-factor.o gate.o clockdomain.o \
> >> +                                          composite.o
> >>   endif
> >> diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
> >> new file mode 100644
> >> index 0000000..f1e0038
> >> --- /dev/null
> >> +++ b/drivers/clk/ti/clockdomain.c
> >> @@ -0,0 +1,70 @@
> >> +/*
> >> + * OMAP clockdomain support
> >> + *
> >> + * Copyright (C) 2013 Texas Instruments, Inc.
> >> + *
> >> + * Tero Kristo <t-kristo@ti.com>
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License version 2 as
> >> + * published by the Free Software Foundation.
> >> + *
> >> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> >> + * kind, whether express or implied; without even the implied warranty
> >> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >> + * GNU General Public License for more details.
> >> + */
> >> +
> >> +#include <linux/clk-provider.h>
> >> +#include <linux/slab.h>
> >> +#include <linux/of.h>
> >> +#include <linux/of_address.h>
> >> +#include <linux/clk/ti.h>
> >> +
> >> +#undef pr_fmt
> >> +#define pr_fmt(fmt) "%s: " fmt, __func__
> >> +
> >> +static void __init of_ti_clockdomain_setup(struct device_node *node)
> >> +{
> >> +       struct clk *clk;
> >> +       struct clk_hw *clk_hw;
> >> +       const char *clkdm_name = node->name;
> >> +       int i;
> >> +       int num_clks;
> >> +
> >> +       num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
> >> +
> >> +       for (i = 0; i < num_clks; i++) {
> >> +               clk = of_clk_get(node, i);
> >> +               if (__clk_get_flags(clk) & CLK_IS_BASIC) {
> >> +                       pr_warn("can't setup clkdm for basic clk %s\n",
> >> +                               __clk_get_name(clk));
> >> +                       continue;
> >> +               }
> >> +               clk_hw = __clk_get_hw(clk);
> >> +               to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
> >> +               omap2_init_clk_clkdm(clk_hw);
> >> +       }
> >> +}
> >> +
> >> +static struct of_device_id ti_clkdm_match_table[] __initdata = {
> >> +       { .compatible = "ti,clockdomain" },
> >> +       { }
> >> +};
> >> +
> >> +/**
> >> + * ti_dt_clockdomains_setup - setup device tree clockdomains
> >> + *
> >> + * Initializes clockdomain nodes for a SoC. This parses through all the
> >> + * nodes with compatible = "ti,clockdomain", and add the clockdomain
> >> + * info for all the clocks listed under these. This function shall be
> >> + * called after rest of the DT clock init has completed and all
> >> + * clock nodes have been registered.
> >> + */
> >> +void __init ti_dt_clockdomains_setup(void)
> >> +{
> >> +       struct device_node *np;
> >> +       for_each_matching_node(np, ti_clkdm_match_table) {
> >> +               of_ti_clockdomain_setup(np);
> >> +       }
> >> +}
> >> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> >> index 872ff2a..231b071 100644
> >> --- a/include/linux/clk/ti.h
> >> +++ b/include/linux/clk/ti.h
> >> @@ -204,6 +204,8 @@ struct clk_omap_reg {
> >>          u16 index;
> >>   };
> >>
> >> +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
> >> +
> >>   void omap2_init_clk_hw_omap_clocks(struct clk *clk);
> >>   int omap3_noncore_dpll_enable(struct clk_hw *hw);
> >>   void omap3_noncore_dpll_disable(struct clk_hw *hw);
> >> @@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
> >>   void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
> >>   void ti_dt_clocks_register(struct ti_dt_clk *oclks);
> >>   void ti_dt_clk_init_provider(struct device_node *np, int index);
> >> +void ti_dt_clockdomains_setup(void);
> >>   int of_ti_clk_autoidle_setup(struct device_node *node);
> >>   int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
> >>
> >> --
> >> 1.7.9.5
> >>
> 

[PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Mike Turquette]

Quoting Tero Kristo (2013-12-16 00:13:08)
> On 12/15/2013 06:23 AM, Mike Turquette wrote:
> > Quoting Tero Kristo (2013-11-26 00:05:51)
> >> Some OMAP clocks require knowledge about their parent clockdomain for
> >> book keeping purposes. This patch creates a new DT binding for TI
> >> clockdomains, which act as a collection of device clocks.
> >>
> >> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> >> ---
> >>   .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
> >>   arch/arm/mach-omap2/clock.h                        |    1 -
> >>   drivers/clk/ti/Makefile                            |    3 +-
> >>   drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
> >>   include/linux/clk/ti.h                             |    3 +
> >>   5 files changed, 96 insertions(+), 2 deletions(-)
> >>   create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> >>   create mode 100644 drivers/clk/ti/clockdomain.c
> >>
> >> diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> >> new file mode 100644
> >> index 0000000..45e6f7c
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> >> @@ -0,0 +1,21 @@
> >> +Binding for Texas Instruments clockdomain.
> >> +
> >> +Binding status: Unstable - ABI compatibility may be broken in the future
> >> +
> >> +This binding uses the common clock binding[1]. Every clock on
> >
> > The patch looks fine to me but I think that the binding description
> > should capture the fact that you are re-using the common clock binding
> > but that this binding definition does not define any new clocks or clock
> > controllers in the way that a typical clock binding would.
> >
> > This code uses the 'clocks' property the same way that any other
> > consumer binding definition would, such as an MMC controller or UART.
> > Those bindings do not say that they are based on the common clock
> > binding AFAIK.
> >
> 
> Ok, will modify the doc accordingly.

Just to clarify: I think it is great to reference clock-bindings.txt,
but somehow make sure that someone reading this doesn't mistake it for a
clock controller binding or a new clock type binding. This ip sort of
"consumes" clocks in the usual way as an IO controller.

Regards,
Mike

> 
> -Tero
> 
> > Regards,
> > Mike
> >
> >> +TI SoC belongs to one clockdomain, but software only needs this
> >> +information for specific clocks which require their parent
> >> +clockdomain to be controlled when the clock is enabled/disabled.
> >> +
> >> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> >> +
> >> +Required properties:
> >> +- compatible : shall be "ti,clockdomain"
> >> +- #clock-cells : from common clock binding; shall be set to 0.
> >> +- clocks : link phandles of clocks within this domain
> >> +
> >> +Examples:
> >> +       dss_clkdm: dss_clkdm {
> >> +               compatible = "ti,clockdomain";
> >> +               clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
> >> +       };
> >> diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
> >> index bc0f9fc..6bd72b5 100644
> >> --- a/arch/arm/mach-omap2/clock.h
> >> +++ b/arch/arm/mach-omap2/clock.h
> >> @@ -38,7 +38,6 @@ struct omap_clk {
> >>          }
> >>
> >>   struct clockdomain;
> >> -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
> >>
> >>   #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)     \
> >>          static struct clk _name = {                             \
> >> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
> >> index 7cba389..67056fb 100644
> >> --- a/drivers/clk/ti/Makefile
> >> +++ b/drivers/clk/ti/Makefile
> >> @@ -1,4 +1,5 @@
> >>   ifneq ($(CONFIG_OF),)
> >>   obj-y                                  += clk.o dpll.o autoidle.o divider.o \
> >> -                                          fixed-factor.o gate.o composite.o
> >> +                                          fixed-factor.o gate.o clockdomain.o \
> >> +                                          composite.o
> >>   endif
> >> diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
> >> new file mode 100644
> >> index 0000000..f1e0038
> >> --- /dev/null
> >> +++ b/drivers/clk/ti/clockdomain.c
> >> @@ -0,0 +1,70 @@
> >> +/*
> >> + * OMAP clockdomain support
> >> + *
> >> + * Copyright (C) 2013 Texas Instruments, Inc.
> >> + *
> >> + * Tero Kristo <t-kristo@ti.com>
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License version 2 as
> >> + * published by the Free Software Foundation.
> >> + *
> >> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> >> + * kind, whether express or implied; without even the implied warranty
> >> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >> + * GNU General Public License for more details.
> >> + */
> >> +
> >> +#include <linux/clk-provider.h>
> >> +#include <linux/slab.h>
> >> +#include <linux/of.h>
> >> +#include <linux/of_address.h>
> >> +#include <linux/clk/ti.h>
> >> +
> >> +#undef pr_fmt
> >> +#define pr_fmt(fmt) "%s: " fmt, __func__
> >> +
> >> +static void __init of_ti_clockdomain_setup(struct device_node *node)
> >> +{
> >> +       struct clk *clk;
> >> +       struct clk_hw *clk_hw;
> >> +       const char *clkdm_name = node->name;
> >> +       int i;
> >> +       int num_clks;
> >> +
> >> +       num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
> >> +
> >> +       for (i = 0; i < num_clks; i++) {
> >> +               clk = of_clk_get(node, i);
> >> +               if (__clk_get_flags(clk) & CLK_IS_BASIC) {
> >> +                       pr_warn("can't setup clkdm for basic clk %s\n",
> >> +                               __clk_get_name(clk));
> >> +                       continue;
> >> +               }
> >> +               clk_hw = __clk_get_hw(clk);
> >> +               to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
> >> +               omap2_init_clk_clkdm(clk_hw);
> >> +       }
> >> +}
> >> +
> >> +static struct of_device_id ti_clkdm_match_table[] __initdata = {
> >> +       { .compatible = "ti,clockdomain" },
> >> +       { }
> >> +};
> >> +
> >> +/**
> >> + * ti_dt_clockdomains_setup - setup device tree clockdomains
> >> + *
> >> + * Initializes clockdomain nodes for a SoC. This parses through all the
> >> + * nodes with compatible = "ti,clockdomain", and add the clockdomain
> >> + * info for all the clocks listed under these. This function shall be
> >> + * called after rest of the DT clock init has completed and all
> >> + * clock nodes have been registered.
> >> + */
> >> +void __init ti_dt_clockdomains_setup(void)
> >> +{
> >> +       struct device_node *np;
> >> +       for_each_matching_node(np, ti_clkdm_match_table) {
> >> +               of_ti_clockdomain_setup(np);
> >> +       }
> >> +}
> >> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> >> index 872ff2a..231b071 100644
> >> --- a/include/linux/clk/ti.h
> >> +++ b/include/linux/clk/ti.h
> >> @@ -204,6 +204,8 @@ struct clk_omap_reg {
> >>          u16 index;
> >>   };
> >>
> >> +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
> >> +
> >>   void omap2_init_clk_hw_omap_clocks(struct clk *clk);
> >>   int omap3_noncore_dpll_enable(struct clk_hw *hw);
> >>   void omap3_noncore_dpll_disable(struct clk_hw *hw);
> >> @@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
> >>   void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
> >>   void ti_dt_clocks_register(struct ti_dt_clk *oclks);
> >>   void ti_dt_clk_init_provider(struct device_node *np, int index);
> >> +void ti_dt_clockdomains_setup(void);
> >>   int of_ti_clk_autoidle_setup(struct device_node *node);
> >>   int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
> >>
> >> --
> >> 1.7.9.5
> >>
> 

[PATCHv10 13/41] CLK: TI: add omap5 clock init file

[Tero Kristo]

clk-54xx.c now contains the clock init functionality for omap5, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
Tested-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/mach-omap2/io.c  |    1 +
 drivers/clk/ti/Makefile   |    1 +
 drivers/clk/ti/clk-54xx.c |  239 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h    |    1 +
 4 files changed, 242 insertions(+)
 create mode 100644 drivers/clk/ti/clk-54xx.c

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index cd22262..3d9b3fc 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -666,6 +666,7 @@ void __init omap5_init_early(void)
 	omap54xx_clockdomains_init();
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_init = omap5xxx_dt_clk_init;
 }
 
 void __init omap5_init_late(void)
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 381f1f8..935e5d2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,4 +3,5 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 endif
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
new file mode 100644
index 0000000..c876e6e
--- /dev/null
+++ b/drivers/clk/ti/clk-54xx.c
@@ -0,0 +1,239 @@
+/*
+ * OMAP5 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo (t-kristo-l0cyMroinI0@public.gmane.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#define OMAP5_DPLL_ABE_DEFFREQ				98304000
+
+static struct ti_dt_clk omap54xx_clks[] = {
+	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
+	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "slimbus_src_clk", "slimbus_src_clk"),
+	DT_CLK(NULL, "slimbus_clk", "slimbus_clk"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin", "sys_clkin"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "xclk60mhsp1_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "xclk60mhsp2_ck"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux", "abe_dpll_bypass_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_clk_mux", "abe_dpll_clk_mux"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "abe_iclk", "abe_iclk"),
+	DT_CLK(NULL, "abe_lp_clk_div", "abe_lp_clk_div"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_h21x2_ck", "dpll_core_h21x2_ck"),
+	DT_CLK(NULL, "c2c_fclk", "c2c_fclk"),
+	DT_CLK(NULL, "c2c_iclk", "c2c_iclk"),
+	DT_CLK(NULL, "custefuse_sys_gfclk_div", "custefuse_sys_gfclk_div"),
+	DT_CLK(NULL, "dpll_core_h11x2_ck", "dpll_core_h11x2_ck"),
+	DT_CLK(NULL, "dpll_core_h12x2_ck", "dpll_core_h12x2_ck"),
+	DT_CLK(NULL, "dpll_core_h13x2_ck", "dpll_core_h13x2_ck"),
+	DT_CLK(NULL, "dpll_core_h14x2_ck", "dpll_core_h14x2_ck"),
+	DT_CLK(NULL, "dpll_core_h22x2_ck", "dpll_core_h22x2_ck"),
+	DT_CLK(NULL, "dpll_core_h23x2_ck", "dpll_core_h23x2_ck"),
+	DT_CLK(NULL, "dpll_core_h24x2_ck", "dpll_core_h24x2_ck"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "dpll_core_m3x2_ck", "dpll_core_m3x2_ck"),
+	DT_CLK(NULL, "iva_dpll_hs_clk_div", "iva_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_x2_ck", "dpll_iva_x2_ck"),
+	DT_CLK(NULL, "dpll_iva_h11x2_ck", "dpll_iva_h11x2_ck"),
+	DT_CLK(NULL, "dpll_iva_h12x2_ck", "dpll_iva_h12x2_ck"),
+	DT_CLK(NULL, "mpu_dpll_hs_clk_div", "mpu_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "per_dpll_hs_clk_div", "per_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_h11x2_ck", "dpll_per_h11x2_ck"),
+	DT_CLK(NULL, "dpll_per_h12x2_ck", "dpll_per_h12x2_ck"),
+	DT_CLK(NULL, "dpll_per_h14x2_ck", "dpll_per_h14x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_per_m3x2_ck", "dpll_per_m3x2_ck"),
+	DT_CLK(NULL, "dpll_unipro1_ck", "dpll_unipro1_ck"),
+	DT_CLK(NULL, "dpll_unipro1_clkdcoldo", "dpll_unipro1_clkdcoldo"),
+	DT_CLK(NULL, "dpll_unipro1_m2_ck", "dpll_unipro1_m2_ck"),
+	DT_CLK(NULL, "dpll_unipro2_ck", "dpll_unipro2_ck"),
+	DT_CLK(NULL, "dpll_unipro2_clkdcoldo", "dpll_unipro2_clkdcoldo"),
+	DT_CLK(NULL, "dpll_unipro2_m2_ck", "dpll_unipro2_m2_ck"),
+	DT_CLK(NULL, "usb_dpll_hs_clk_div", "usb_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo", "dpll_usb_clkdcoldo"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "dss_syc_gfclk_div", "dss_syc_gfclk_div"),
+	DT_CLK(NULL, "func_128m_clk", "func_128m_clk"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "l3_iclk_div", "l3_iclk_div"),
+	DT_CLK(NULL, "gpu_l3_iclk", "gpu_l3_iclk"),
+	DT_CLK(NULL, "l3init_60m_fclk", "l3init_60m_fclk"),
+	DT_CLK(NULL, "wkupaon_iclk_mux", "wkupaon_iclk_mux"),
+	DT_CLK(NULL, "l3instr_ts_gclk_div", "l3instr_ts_gclk_div"),
+	DT_CLK(NULL, "l4_root_clk_div", "l4_root_clk_div"),
+	DT_CLK(NULL, "dss_32khz_clk", "dss_32khz_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_sys_clk", "dss_sys_clk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "gpio7_dbclk", "gpio7_dbclk"),
+	DT_CLK(NULL, "gpio8_dbclk", "gpio8_dbclk"),
+	DT_CLK(NULL, "iss_ctrlclk", "iss_ctrlclk"),
+	DT_CLK(NULL, "lli_txphy_clk", "lli_txphy_clk"),
+	DT_CLK(NULL, "lli_txphy_ls_clk", "lli_txphy_ls_clk"),
+	DT_CLK(NULL, "mmc1_32khz_clk", "mmc1_32khz_clk"),
+	DT_CLK(NULL, "sata_ref_clk", "sata_ref_clk"),
+	DT_CLK(NULL, "slimbus1_slimbus_clk", "slimbus1_slimbus_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "usb_host_hs_hsic480m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "usb_host_hs_hsic480m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p3_clk", "usb_host_hs_hsic480m_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "usb_host_hs_hsic60m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "usb_host_hs_hsic60m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p3_clk", "usb_host_hs_hsic60m_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "usb_host_hs_utmi_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "usb_host_hs_utmi_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "usb_host_hs_utmi_p3_clk"),
+	DT_CLK(NULL, "usb_otg_ss_refclk960m", "usb_otg_ss_refclk960m"),
+	DT_CLK(NULL, "usb_phy_cm_clk32k", "usb_phy_cm_clk32k"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "usb_tll_hs_usb_ch0_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "usb_tll_hs_usb_ch1_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "usb_tll_hs_usb_ch2_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "dmic_sync_mux_ck", "dmic_sync_mux_ck"),
+	DT_CLK(NULL, "dmic_gfclk", "dmic_gfclk"),
+	DT_CLK(NULL, "fdif_fclk", "fdif_fclk"),
+	DT_CLK(NULL, "gpu_core_gclk_mux", "gpu_core_gclk_mux"),
+	DT_CLK(NULL, "gpu_hyd_gclk_mux", "gpu_hyd_gclk_mux"),
+	DT_CLK(NULL, "hsi_fclk", "hsi_fclk"),
+	DT_CLK(NULL, "mcasp_sync_mux_ck", "mcasp_sync_mux_ck"),
+	DT_CLK(NULL, "mcasp_gfclk", "mcasp_gfclk"),
+	DT_CLK(NULL, "mcbsp1_sync_mux_ck", "mcbsp1_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp1_gfclk", "mcbsp1_gfclk"),
+	DT_CLK(NULL, "mcbsp2_sync_mux_ck", "mcbsp2_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp2_gfclk", "mcbsp2_gfclk"),
+	DT_CLK(NULL, "mcbsp3_sync_mux_ck", "mcbsp3_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp3_gfclk", "mcbsp3_gfclk"),
+	DT_CLK(NULL, "mmc1_fclk_mux", "mmc1_fclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk", "mmc1_fclk"),
+	DT_CLK(NULL, "mmc2_fclk_mux", "mmc2_fclk_mux"),
+	DT_CLK(NULL, "mmc2_fclk", "mmc2_fclk"),
+	DT_CLK(NULL, "timer10_gfclk_mux", "timer10_gfclk_mux"),
+	DT_CLK(NULL, "timer11_gfclk_mux", "timer11_gfclk_mux"),
+	DT_CLK(NULL, "timer1_gfclk_mux", "timer1_gfclk_mux"),
+	DT_CLK(NULL, "timer2_gfclk_mux", "timer2_gfclk_mux"),
+	DT_CLK(NULL, "timer3_gfclk_mux", "timer3_gfclk_mux"),
+	DT_CLK(NULL, "timer4_gfclk_mux", "timer4_gfclk_mux"),
+	DT_CLK(NULL, "timer5_gfclk_mux", "timer5_gfclk_mux"),
+	DT_CLK(NULL, "timer6_gfclk_mux", "timer6_gfclk_mux"),
+	DT_CLK(NULL, "timer7_gfclk_mux", "timer7_gfclk_mux"),
+	DT_CLK(NULL, "timer8_gfclk_mux", "timer8_gfclk_mux"),
+	DT_CLK(NULL, "timer9_gfclk_mux", "timer9_gfclk_mux"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "utmi_p1_gfclk"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "utmi_p2_gfclk"),
+	DT_CLK(NULL, "auxclk0_src_ck", "auxclk0_src_ck"),
+	DT_CLK(NULL, "auxclk0_ck", "auxclk0_ck"),
+	DT_CLK(NULL, "auxclkreq0_ck", "auxclkreq0_ck"),
+	DT_CLK(NULL, "auxclk1_src_ck", "auxclk1_src_ck"),
+	DT_CLK(NULL, "auxclk1_ck", "auxclk1_ck"),
+	DT_CLK(NULL, "auxclkreq1_ck", "auxclkreq1_ck"),
+	DT_CLK(NULL, "auxclk2_src_ck", "auxclk2_src_ck"),
+	DT_CLK(NULL, "auxclk2_ck", "auxclk2_ck"),
+	DT_CLK(NULL, "auxclkreq2_ck", "auxclkreq2_ck"),
+	DT_CLK(NULL, "auxclk3_src_ck", "auxclk3_src_ck"),
+	DT_CLK(NULL, "auxclk3_ck", "auxclk3_ck"),
+	DT_CLK(NULL, "auxclkreq3_ck", "auxclkreq3_ck"),
+	DT_CLK(NULL, "gpmc_ck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("omap_timer.1", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.2", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.3", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.4", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.9", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.10", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.11", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.5", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.6", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.7", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.8", "sys_ck", "dss_syc_gfclk_div"),
+	{ .node_name = NULL },
+};
+
+int __init omap5xxx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck;
+
+	ti_dt_clocks_register(omap54xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_clk_mux");
+	sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
+	rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
+	abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
+	if (!rc)
+		rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 2ce4586..50c532c 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -240,6 +240,7 @@ int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 int omap4xxx_dt_clk_init(void);
+int omap5xxx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv10 13/41] CLK: TI: add omap5 clock init file

[Tero Kristo]

clk-54xx.c now contains the clock init functionality for omap5, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/io.c  |    1 +
 drivers/clk/ti/Makefile   |    1 +
 drivers/clk/ti/clk-54xx.c |  239 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h    |    1 +
 4 files changed, 242 insertions(+)
 create mode 100644 drivers/clk/ti/clk-54xx.c

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index cd22262..3d9b3fc 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -666,6 +666,7 @@ void __init omap5_init_early(void)
 	omap54xx_clockdomains_init();
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_init = omap5xxx_dt_clk_init;
 }
 
 void __init omap5_init_late(void)
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 381f1f8..935e5d2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,4 +3,5 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 endif
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
new file mode 100644
index 0000000..c876e6e
--- /dev/null
+++ b/drivers/clk/ti/clk-54xx.c
@@ -0,0 +1,239 @@
+/*
+ * OMAP5 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo (t-kristo at ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#define OMAP5_DPLL_ABE_DEFFREQ				98304000
+
+static struct ti_dt_clk omap54xx_clks[] = {
+	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
+	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "slimbus_src_clk", "slimbus_src_clk"),
+	DT_CLK(NULL, "slimbus_clk", "slimbus_clk"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin", "sys_clkin"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "xclk60mhsp1_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "xclk60mhsp2_ck"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux", "abe_dpll_bypass_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_clk_mux", "abe_dpll_clk_mux"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "abe_iclk", "abe_iclk"),
+	DT_CLK(NULL, "abe_lp_clk_div", "abe_lp_clk_div"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_h21x2_ck", "dpll_core_h21x2_ck"),
+	DT_CLK(NULL, "c2c_fclk", "c2c_fclk"),
+	DT_CLK(NULL, "c2c_iclk", "c2c_iclk"),
+	DT_CLK(NULL, "custefuse_sys_gfclk_div", "custefuse_sys_gfclk_div"),
+	DT_CLK(NULL, "dpll_core_h11x2_ck", "dpll_core_h11x2_ck"),
+	DT_CLK(NULL, "dpll_core_h12x2_ck", "dpll_core_h12x2_ck"),
+	DT_CLK(NULL, "dpll_core_h13x2_ck", "dpll_core_h13x2_ck"),
+	DT_CLK(NULL, "dpll_core_h14x2_ck", "dpll_core_h14x2_ck"),
+	DT_CLK(NULL, "dpll_core_h22x2_ck", "dpll_core_h22x2_ck"),
+	DT_CLK(NULL, "dpll_core_h23x2_ck", "dpll_core_h23x2_ck"),
+	DT_CLK(NULL, "dpll_core_h24x2_ck", "dpll_core_h24x2_ck"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "dpll_core_m3x2_ck", "dpll_core_m3x2_ck"),
+	DT_CLK(NULL, "iva_dpll_hs_clk_div", "iva_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_x2_ck", "dpll_iva_x2_ck"),
+	DT_CLK(NULL, "dpll_iva_h11x2_ck", "dpll_iva_h11x2_ck"),
+	DT_CLK(NULL, "dpll_iva_h12x2_ck", "dpll_iva_h12x2_ck"),
+	DT_CLK(NULL, "mpu_dpll_hs_clk_div", "mpu_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "per_dpll_hs_clk_div", "per_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_h11x2_ck", "dpll_per_h11x2_ck"),
+	DT_CLK(NULL, "dpll_per_h12x2_ck", "dpll_per_h12x2_ck"),
+	DT_CLK(NULL, "dpll_per_h14x2_ck", "dpll_per_h14x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_per_m3x2_ck", "dpll_per_m3x2_ck"),
+	DT_CLK(NULL, "dpll_unipro1_ck", "dpll_unipro1_ck"),
+	DT_CLK(NULL, "dpll_unipro1_clkdcoldo", "dpll_unipro1_clkdcoldo"),
+	DT_CLK(NULL, "dpll_unipro1_m2_ck", "dpll_unipro1_m2_ck"),
+	DT_CLK(NULL, "dpll_unipro2_ck", "dpll_unipro2_ck"),
+	DT_CLK(NULL, "dpll_unipro2_clkdcoldo", "dpll_unipro2_clkdcoldo"),
+	DT_CLK(NULL, "dpll_unipro2_m2_ck", "dpll_unipro2_m2_ck"),
+	DT_CLK(NULL, "usb_dpll_hs_clk_div", "usb_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo", "dpll_usb_clkdcoldo"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "dss_syc_gfclk_div", "dss_syc_gfclk_div"),
+	DT_CLK(NULL, "func_128m_clk", "func_128m_clk"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "l3_iclk_div", "l3_iclk_div"),
+	DT_CLK(NULL, "gpu_l3_iclk", "gpu_l3_iclk"),
+	DT_CLK(NULL, "l3init_60m_fclk", "l3init_60m_fclk"),
+	DT_CLK(NULL, "wkupaon_iclk_mux", "wkupaon_iclk_mux"),
+	DT_CLK(NULL, "l3instr_ts_gclk_div", "l3instr_ts_gclk_div"),
+	DT_CLK(NULL, "l4_root_clk_div", "l4_root_clk_div"),
+	DT_CLK(NULL, "dss_32khz_clk", "dss_32khz_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_sys_clk", "dss_sys_clk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "gpio7_dbclk", "gpio7_dbclk"),
+	DT_CLK(NULL, "gpio8_dbclk", "gpio8_dbclk"),
+	DT_CLK(NULL, "iss_ctrlclk", "iss_ctrlclk"),
+	DT_CLK(NULL, "lli_txphy_clk", "lli_txphy_clk"),
+	DT_CLK(NULL, "lli_txphy_ls_clk", "lli_txphy_ls_clk"),
+	DT_CLK(NULL, "mmc1_32khz_clk", "mmc1_32khz_clk"),
+	DT_CLK(NULL, "sata_ref_clk", "sata_ref_clk"),
+	DT_CLK(NULL, "slimbus1_slimbus_clk", "slimbus1_slimbus_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "usb_host_hs_hsic480m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "usb_host_hs_hsic480m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p3_clk", "usb_host_hs_hsic480m_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "usb_host_hs_hsic60m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "usb_host_hs_hsic60m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p3_clk", "usb_host_hs_hsic60m_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "usb_host_hs_utmi_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "usb_host_hs_utmi_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "usb_host_hs_utmi_p3_clk"),
+	DT_CLK(NULL, "usb_otg_ss_refclk960m", "usb_otg_ss_refclk960m"),
+	DT_CLK(NULL, "usb_phy_cm_clk32k", "usb_phy_cm_clk32k"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "usb_tll_hs_usb_ch0_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "usb_tll_hs_usb_ch1_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "usb_tll_hs_usb_ch2_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "dmic_sync_mux_ck", "dmic_sync_mux_ck"),
+	DT_CLK(NULL, "dmic_gfclk", "dmic_gfclk"),
+	DT_CLK(NULL, "fdif_fclk", "fdif_fclk"),
+	DT_CLK(NULL, "gpu_core_gclk_mux", "gpu_core_gclk_mux"),
+	DT_CLK(NULL, "gpu_hyd_gclk_mux", "gpu_hyd_gclk_mux"),
+	DT_CLK(NULL, "hsi_fclk", "hsi_fclk"),
+	DT_CLK(NULL, "mcasp_sync_mux_ck", "mcasp_sync_mux_ck"),
+	DT_CLK(NULL, "mcasp_gfclk", "mcasp_gfclk"),
+	DT_CLK(NULL, "mcbsp1_sync_mux_ck", "mcbsp1_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp1_gfclk", "mcbsp1_gfclk"),
+	DT_CLK(NULL, "mcbsp2_sync_mux_ck", "mcbsp2_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp2_gfclk", "mcbsp2_gfclk"),
+	DT_CLK(NULL, "mcbsp3_sync_mux_ck", "mcbsp3_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp3_gfclk", "mcbsp3_gfclk"),
+	DT_CLK(NULL, "mmc1_fclk_mux", "mmc1_fclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk", "mmc1_fclk"),
+	DT_CLK(NULL, "mmc2_fclk_mux", "mmc2_fclk_mux"),
+	DT_CLK(NULL, "mmc2_fclk", "mmc2_fclk"),
+	DT_CLK(NULL, "timer10_gfclk_mux", "timer10_gfclk_mux"),
+	DT_CLK(NULL, "timer11_gfclk_mux", "timer11_gfclk_mux"),
+	DT_CLK(NULL, "timer1_gfclk_mux", "timer1_gfclk_mux"),
+	DT_CLK(NULL, "timer2_gfclk_mux", "timer2_gfclk_mux"),
+	DT_CLK(NULL, "timer3_gfclk_mux", "timer3_gfclk_mux"),
+	DT_CLK(NULL, "timer4_gfclk_mux", "timer4_gfclk_mux"),
+	DT_CLK(NULL, "timer5_gfclk_mux", "timer5_gfclk_mux"),
+	DT_CLK(NULL, "timer6_gfclk_mux", "timer6_gfclk_mux"),
+	DT_CLK(NULL, "timer7_gfclk_mux", "timer7_gfclk_mux"),
+	DT_CLK(NULL, "timer8_gfclk_mux", "timer8_gfclk_mux"),
+	DT_CLK(NULL, "timer9_gfclk_mux", "timer9_gfclk_mux"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "utmi_p1_gfclk"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "utmi_p2_gfclk"),
+	DT_CLK(NULL, "auxclk0_src_ck", "auxclk0_src_ck"),
+	DT_CLK(NULL, "auxclk0_ck", "auxclk0_ck"),
+	DT_CLK(NULL, "auxclkreq0_ck", "auxclkreq0_ck"),
+	DT_CLK(NULL, "auxclk1_src_ck", "auxclk1_src_ck"),
+	DT_CLK(NULL, "auxclk1_ck", "auxclk1_ck"),
+	DT_CLK(NULL, "auxclkreq1_ck", "auxclkreq1_ck"),
+	DT_CLK(NULL, "auxclk2_src_ck", "auxclk2_src_ck"),
+	DT_CLK(NULL, "auxclk2_ck", "auxclk2_ck"),
+	DT_CLK(NULL, "auxclkreq2_ck", "auxclkreq2_ck"),
+	DT_CLK(NULL, "auxclk3_src_ck", "auxclk3_src_ck"),
+	DT_CLK(NULL, "auxclk3_ck", "auxclk3_ck"),
+	DT_CLK(NULL, "auxclkreq3_ck", "auxclkreq3_ck"),
+	DT_CLK(NULL, "gpmc_ck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("omap_timer.1", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.2", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.3", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.4", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.9", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.10", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.11", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.5", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.6", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.7", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.8", "sys_ck", "dss_syc_gfclk_div"),
+	{ .node_name = NULL },
+};
+
+int __init omap5xxx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck;
+
+	ti_dt_clocks_register(omap54xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_clk_mux");
+	sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
+	rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
+	abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
+	if (!rc)
+		rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 2ce4586..50c532c 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -240,6 +240,7 @@ int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 int omap4xxx_dt_clk_init(void);
+int omap5xxx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv10 18/41] CLK: TI: add interface clock support for OMAP3

[Tero Kristo]

OMAP3 has interface clocks in addition to functional clocks, which
require special handling for the autoidle and idle status register
offsets mainly.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 .../devicetree/bindings/clock/ti/interface.txt     |   54 ++++++++
 arch/arm/mach-omap2/clock.h                        |    5 -
 drivers/clk/ti/Makefile                            |    1 +
 drivers/clk/ti/interface.c                         |  130 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    5 +
 5 files changed, 190 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/interface.txt
 create mode 100644 drivers/clk/ti/interface.c

diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
new file mode 100644
index 0000000..064e8ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -0,0 +1,54 @@
+Binding for Texas Instruments interface clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features, including
+companion clock finding (match corresponding functional gate
+clock) and hardware autoidle enable / disable.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,omap3-interface-clock" - basic OMAP3 interface clock
+  "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
+				       capability for waiting clock to be ready
+  "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
+					handling
+  "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
+  "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
+  "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : base address for the control register
+
+Optional properties:
+- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
+
+Examples:
+	aes1_ick: aes1_ick@48004a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x48004a14 0x4>;
+		ti,bit-shift = <3>;
+	};
+
+	cam_ick: cam_ick@48004f10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x48004f10 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	ssi_ick_3430es2: ssi_ick_3430es2@48004a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x48004a10 0x4>;
+		ti,bit-shift = <0>;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1da9dc3..cbe5ff7 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -270,15 +270,10 @@ extern struct clk dummy_ck;
 
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
 extern const struct clk_hw_omap_ops clkhwops_apll54;
 extern const struct clk_hw_omap_ops clkhwops_apll96;
 extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 7eb6f2b..e42a703 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,6 +3,7 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= interface.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
new file mode 100644
index 0000000..9180423
--- /dev/null
+++ b/drivers/clk/ti/interface.c
@@ -0,0 +1,130 @@
+/*
+ * OMAP interface clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static const struct clk_ops ti_interface_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+static int __init _of_ti_interface_clk_setup(struct device_node *node,
+					     const struct clk_hw_omap_ops *ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *parent_name;
+	u32 val;
+	int ret = 0;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return -ENOMEM;
+
+	clk_hw->hw.init = &init;
+	clk_hw->ops = ops;
+	clk_hw->flags = REGMAP_ADDRESSING;
+
+	clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0);
+	if (!clk_hw->enable_reg) {
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		clk_hw->enable_bit = val;
+
+	init.name = node->name;
+	init.ops = &ti_interface_clk_ops;
+	init.flags = 0;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s must have a parent\n", node->name);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	init.num_parents = 1;
+	init.parent_names = &parent_name;
+
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		omap2_init_clk_hw_omap_clocks(clk);
+		return 0;
+	}
+	ret = PTR_ERR(clk);
+
+cleanup:
+	kfree(clk_hw);
+	return ret;
+}
+
+static int __init of_ti_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_iclk_wait);
+}
+CLK_OF_DECLARE(ti_interface_clk, "ti,omap3-interface-clock",
+	       of_ti_interface_clk_setup);
+
+static int __init of_ti_no_wait_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_iclk);
+}
+CLK_OF_DECLARE(ti_no_wait_interface_clk, "ti,omap3-no-wait-interface-clock",
+	       of_ti_no_wait_interface_clk_setup);
+
+static int __init of_ti_hsotgusb_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_omap3430es2_iclk_hsotgusb_wait);
+}
+CLK_OF_DECLARE(ti_hsotgusb_interface_clk, "ti,omap3-hsotgusb-interface-clock",
+	       of_ti_hsotgusb_interface_clk_setup);
+
+static int __init of_ti_dss_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_omap3430es2_iclk_dss_usbhost_wait);
+}
+CLK_OF_DECLARE(ti_dss_interface_clk, "ti,omap3-dss-interface-clock",
+	       of_ti_dss_interface_clk_setup);
+
+static int __init of_ti_ssi_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node,
+					  &clkhwops_omap3430es2_iclk_ssi_wait);
+}
+CLK_OF_DECLARE(ti_ssi_interface_clk, "ti,omap3-ssi-interface-clock",
+	       of_ti_ssi_interface_clk_setup);
+
+static int __init of_ti_am35xx_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_am35xx_ipss_wait);
+}
+CLK_OF_DECLARE(ti_am35xx_interface_clk, "ti,am35xx-interface-clock",
+	       of_ti_am35xx_interface_clk_setup);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index f7287ef..45d9d52 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -258,6 +258,11 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
 extern const struct clk_hw_omap_ops clkhwops_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
 
 #endif
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv10 18/41] CLK: TI: add interface clock support for OMAP3

[Tero Kristo]

OMAP3 has interface clocks in addition to functional clocks, which
require special handling for the autoidle and idle status register
offsets mainly.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/interface.txt     |   54 ++++++++
 arch/arm/mach-omap2/clock.h                        |    5 -
 drivers/clk/ti/Makefile                            |    1 +
 drivers/clk/ti/interface.c                         |  130 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    5 +
 5 files changed, 190 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/interface.txt
 create mode 100644 drivers/clk/ti/interface.c

diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
new file mode 100644
index 0000000..064e8ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -0,0 +1,54 @@
+Binding for Texas Instruments interface clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features, including
+companion clock finding (match corresponding functional gate
+clock) and hardware autoidle enable / disable.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,omap3-interface-clock" - basic OMAP3 interface clock
+  "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
+				       capability for waiting clock to be ready
+  "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
+					handling
+  "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
+  "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
+  "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : base address for the control register
+
+Optional properties:
+- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
+
+Examples:
+	aes1_ick: aes1_ick at 48004a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x48004a14 0x4>;
+		ti,bit-shift = <3>;
+	};
+
+	cam_ick: cam_ick at 48004f10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x48004f10 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	ssi_ick_3430es2: ssi_ick_3430es2 at 48004a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x48004a10 0x4>;
+		ti,bit-shift = <0>;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1da9dc3..cbe5ff7 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -270,15 +270,10 @@ extern struct clk dummy_ck;
 
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
 extern const struct clk_hw_omap_ops clkhwops_apll54;
 extern const struct clk_hw_omap_ops clkhwops_apll96;
 extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 7eb6f2b..e42a703 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,6 +3,7 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= interface.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
new file mode 100644
index 0000000..9180423
--- /dev/null
+++ b/drivers/clk/ti/interface.c
@@ -0,0 +1,130 @@
+/*
+ * OMAP interface clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static const struct clk_ops ti_interface_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+static int __init _of_ti_interface_clk_setup(struct device_node *node,
+					     const struct clk_hw_omap_ops *ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *parent_name;
+	u32 val;
+	int ret = 0;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return -ENOMEM;
+
+	clk_hw->hw.init = &init;
+	clk_hw->ops = ops;
+	clk_hw->flags = REGMAP_ADDRESSING;
+
+	clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0);
+	if (!clk_hw->enable_reg) {
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		clk_hw->enable_bit = val;
+
+	init.name = node->name;
+	init.ops = &ti_interface_clk_ops;
+	init.flags = 0;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s must have a parent\n", node->name);
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	init.num_parents = 1;
+	init.parent_names = &parent_name;
+
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		omap2_init_clk_hw_omap_clocks(clk);
+		return 0;
+	}
+	ret = PTR_ERR(clk);
+
+cleanup:
+	kfree(clk_hw);
+	return ret;
+}
+
+static int __init of_ti_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_iclk_wait);
+}
+CLK_OF_DECLARE(ti_interface_clk, "ti,omap3-interface-clock",
+	       of_ti_interface_clk_setup);
+
+static int __init of_ti_no_wait_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_iclk);
+}
+CLK_OF_DECLARE(ti_no_wait_interface_clk, "ti,omap3-no-wait-interface-clock",
+	       of_ti_no_wait_interface_clk_setup);
+
+static int __init of_ti_hsotgusb_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_omap3430es2_iclk_hsotgusb_wait);
+}
+CLK_OF_DECLARE(ti_hsotgusb_interface_clk, "ti,omap3-hsotgusb-interface-clock",
+	       of_ti_hsotgusb_interface_clk_setup);
+
+static int __init of_ti_dss_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_omap3430es2_iclk_dss_usbhost_wait);
+}
+CLK_OF_DECLARE(ti_dss_interface_clk, "ti,omap3-dss-interface-clock",
+	       of_ti_dss_interface_clk_setup);
+
+static int __init of_ti_ssi_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node,
+					  &clkhwops_omap3430es2_iclk_ssi_wait);
+}
+CLK_OF_DECLARE(ti_ssi_interface_clk, "ti,omap3-ssi-interface-clock",
+	       of_ti_ssi_interface_clk_setup);
+
+static int __init of_ti_am35xx_interface_clk_setup(struct device_node *node)
+{
+	return _of_ti_interface_clk_setup(node, &clkhwops_am35xx_ipss_wait);
+}
+CLK_OF_DECLARE(ti_am35xx_interface_clk, "ti,am35xx-interface-clock",
+	       of_ti_am35xx_interface_clk_setup);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index f7287ef..45d9d52 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -258,6 +258,11 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
 extern const struct clk_hw_omap_ops clkhwops_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
 
 #endif
-- 
1.7.9.5

[PATCHv10 22/41] ARM: dts: omap5 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP5 power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/omap5.dtsi           |   30 +
 arch/arm/boot/dts/omap54xx-clocks.dtsi | 1396 ++++++++++++++++++++++++++++++++
 2 files changed, 1426 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap54xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 17fe896..3920087 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -107,6 +107,34 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		prm: prm@4ae06000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4ae06000 0x3000>;
+		};
+
+		cm_core_aon: cm_core_aon@4a004000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a004000 0x2000>;
+		};
+
+		scrm: scrm@4ae0a000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4ae0a000 0x2000>;
+		};
+
+		cm_core: cm_core@4a008000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a008000 0x3000>;
+		};
+
 		counter32k: counter@4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
@@ -750,3 +778,5 @@
 		};
 	};
 };
+
+/include/ "omap54xx-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
new file mode 100644
index 0000000..7c19f38
--- /dev/null
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -0,0 +1,1396 @@
+/*
+ * Device Tree Source for OMAP5 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon {
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	abe_iclk: abe_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&abe_clk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h21x2_ck: dpll_core_h21x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	c2c_fclk: c2c_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h21x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	c2c_iclk: c2c_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&c2c_fclk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_h11x2_ck: dpll_core_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_iclk_div: l3_iclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpu_l3_iclk: gpu_l3_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	dmic_sync_mux_ck: dmic_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0538>;
+	};
+
+	dmic_gfclk: dmic_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0538>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0540>;
+	};
+
+	mcasp_gfclk: mcasp_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0548>;
+	};
+
+	mcbsp1_gfclk: mcbsp1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0548>;
+	};
+
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0550>;
+	};
+
+	mcbsp2_gfclk: mcbsp2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0558>;
+	};
+
+	mcbsp3_gfclk: mcbsp3_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0578>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm {
+	sys_clkin: sys_clkin {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dss_syc_gfclk_div: dss_syc_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1938>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1940>;
+	};
+};
+&cm_core {
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_unipro1_ck: dpll_unipro1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro1_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro1_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_unipro2_ck: dpll_unipro2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
+	};
+
+	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro2_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01d0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1420>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1420>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1420>;
+	};
+
+	dss_sys_clk: dss_sys_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dss_syc_gfclk_div>;
+		ti,bit-shift = <10>;
+		reg = <0x1420>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1060>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1068>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1070>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1078>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1080>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1110>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1118>;
+	};
+
+	iss_ctrlclk: iss_ctrlclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1320>;
+	};
+
+	lli_txphy_clk: lli_txphy_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x0f20>;
+	};
+
+	lli_txphy_ls_clk: lli_txphy_ls_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_m2_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0f20>;
+	};
+
+	mmc1_32khz_clk: mmc1_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1628>;
+	};
+
+	sata_ref_clk: sata_ref_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin>;
+		ti,bit-shift = <8>;
+		reg = <0x1688>;
+	};
+
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <11>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <12>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <6>;
+		reg = <0x1658>;
+	};
+
+	utmi_p1_gfclk: utmi_p1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p1_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1658>;
+	};
+
+	utmi_p2_gfclk: utmi_p2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p2_gfclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1658>;
+	};
+
+	usb_otg_ss_refclk960m: usb_otg_ss_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x16f0>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1668>;
+	};
+
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1668>;
+	};
+
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1668>;
+	};
+
+	fdif_fclk: fdif_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1328>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1520>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1520>;
+	};
+
+	hsi_fclk: hsi_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1638>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1628>;
+	};
+
+	mmc1_fclk: mmc1_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <2>;
+		reg = <0x1628>;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1630>;
+	};
+
+	mmc2_fclk: mmc2_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <2>;
+		reg = <0x1630>;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1038>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1040>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1048>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1050>;
+	};
+
+	l3init_clkdm: l3init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+&scrm {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv10 22/41] ARM: dts: omap5 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP5 power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi           |   30 +
 arch/arm/boot/dts/omap54xx-clocks.dtsi | 1396 ++++++++++++++++++++++++++++++++
 2 files changed, 1426 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap54xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 17fe896..3920087 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -107,6 +107,34 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		prm: prm at 4ae06000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4ae06000 0x3000>;
+		};
+
+		cm_core_aon: cm_core_aon at 4a004000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a004000 0x2000>;
+		};
+
+		scrm: scrm at 4ae0a000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4ae0a000 0x2000>;
+		};
+
+		cm_core: cm_core at 4a008000 {
+			compatible = "ti,clock-master";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a008000 0x3000>;
+		};
+
 		counter32k: counter at 4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
@@ -750,3 +778,5 @@
 		};
 	};
 };
+
+/include/ "omap54xx-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
new file mode 100644
index 0000000..7c19f38
--- /dev/null
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -0,0 +1,1396 @@
+/*
+ * Device Tree Source for OMAP5 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon {
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	abe_iclk: abe_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&abe_clk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h21x2_ck: dpll_core_h21x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	c2c_fclk: c2c_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h21x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	c2c_iclk: c2c_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&c2c_fclk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_h11x2_ck: dpll_core_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_iclk_div: l3_iclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpu_l3_iclk: gpu_l3_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	dmic_sync_mux_ck: dmic_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0538>;
+	};
+
+	dmic_gfclk: dmic_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0538>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0540>;
+	};
+
+	mcasp_gfclk: mcasp_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0548>;
+	};
+
+	mcbsp1_gfclk: mcbsp1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0548>;
+	};
+
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0550>;
+	};
+
+	mcbsp2_gfclk: mcbsp2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0558>;
+	};
+
+	mcbsp3_gfclk: mcbsp3_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0578>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm {
+	sys_clkin: sys_clkin {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dss_syc_gfclk_div: dss_syc_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1938>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1940>;
+	};
+};
+&cm_core {
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_unipro1_ck: dpll_unipro1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro1_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro1_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_unipro2_ck: dpll_unipro2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
+	};
+
+	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro2_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01d0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1420>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1420>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1420>;
+	};
+
+	dss_sys_clk: dss_sys_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dss_syc_gfclk_div>;
+		ti,bit-shift = <10>;
+		reg = <0x1420>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1060>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1068>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1070>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1078>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1080>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1110>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1118>;
+	};
+
+	iss_ctrlclk: iss_ctrlclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1320>;
+	};
+
+	lli_txphy_clk: lli_txphy_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x0f20>;
+	};
+
+	lli_txphy_ls_clk: lli_txphy_ls_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_m2_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0f20>;
+	};
+
+	mmc1_32khz_clk: mmc1_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1628>;
+	};
+
+	sata_ref_clk: sata_ref_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin>;
+		ti,bit-shift = <8>;
+		reg = <0x1688>;
+	};
+
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <11>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <12>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <6>;
+		reg = <0x1658>;
+	};
+
+	utmi_p1_gfclk: utmi_p1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p1_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1658>;
+	};
+
+	utmi_p2_gfclk: utmi_p2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p2_gfclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1658>;
+	};
+
+	usb_otg_ss_refclk960m: usb_otg_ss_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x16f0>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1668>;
+	};
+
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1668>;
+	};
+
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1668>;
+	};
+
+	fdif_fclk: fdif_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1328>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1520>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1520>;
+	};
+
+	hsi_fclk: hsi_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1638>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1628>;
+	};
+
+	mmc1_fclk: mmc1_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <2>;
+		reg = <0x1628>;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1630>;
+	};
+
+	mmc2_fclk: mmc2_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <2>;
+		reg = <0x1630>;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1038>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1040>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1048>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1050>;
+	};
+
+	l3init_clkdm: l3init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+&scrm {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+};
-- 
1.7.9.5

Re: [PATCHv10 22/41] ARM: dts: omap5 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the OMAP5 power,
> reset and clock manager (PRCM).

...

> +&cm_core_aon {
> +	pad_clks_src_ck: pad_clks_src_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <12000000>;
> +	};
> +
> +	pad_clks_ck: pad_clks_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&pad_clks_src_ck>;
> +		ti,bit-shift = <8>;
> +		reg = <0x0108>;
> +	};

All of the clock data should be underneath a "clocks {" node, for all of 
the chips.  Please see the Calxeda ECX clocks DT data as an example of how 
this should look:

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/ecx-common.dtsi#n141


- Paul

[PATCHv10 22/41] ARM: dts: omap5 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the OMAP5 power,
> reset and clock manager (PRCM).

...

> +&cm_core_aon {
> +	pad_clks_src_ck: pad_clks_src_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <12000000>;
> +	};
> +
> +	pad_clks_ck: pad_clks_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&pad_clks_src_ck>;
> +		ti,bit-shift = <8>;
> +		reg = <0x0108>;
> +	};

All of the clock data should be underneath a "clocks {" node, for all of 
the chips.  Please see the Calxeda ECX clocks DT data as an example of how 
this should look:

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/ecx-common.dtsi#n141


- Paul

Re: [PATCHv10 22/41] ARM: dts: omap5 clock data

[Tero Kristo]

On 12/16/2013 12:51 PM, Paul Walmsley wrote:
> On Tue, 26 Nov 2013, Tero Kristo wrote:
>
>> This patch creates a unique node for each clock in the OMAP5 power,
>> reset and clock manager (PRCM).
>
> ...
>
>> +&cm_core_aon {
>> +	pad_clks_src_ck: pad_clks_src_ck {
>> +		#clock-cells = <0>;
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <12000000>;
>> +	};
>> +
>> +	pad_clks_ck: pad_clks_ck {
>> +		#clock-cells = <0>;
>> +		compatible = "ti,gate-clock";
>> +		clocks = <&pad_clks_src_ck>;
>> +		ti,bit-shift = <8>;
>> +		reg = <0x0108>;
>> +	};
>
> All of the clock data should be underneath a "clocks {" node, for all of
> the chips.  Please see the Calxeda ECX clocks DT data as an example of how
> this should look:
>
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/ecx-common.dtsi#n141

Any reason why?

Should be relatively trivial to change though, however I am not too sure 
if this works:

&core_core_aon {
   &clocks {
     pad_clks_src_ck: ...
   };
};

... as I want to modify nodes under the structure. Does it?

-Tero

[PATCHv10 22/41] ARM: dts: omap5 clock data

[Tero Kristo]

On 12/16/2013 12:51 PM, Paul Walmsley wrote:
> On Tue, 26 Nov 2013, Tero Kristo wrote:
>
>> This patch creates a unique node for each clock in the OMAP5 power,
>> reset and clock manager (PRCM).
>
> ...
>
>> +&cm_core_aon {
>> +	pad_clks_src_ck: pad_clks_src_ck {
>> +		#clock-cells = <0>;
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <12000000>;
>> +	};
>> +
>> +	pad_clks_ck: pad_clks_ck {
>> +		#clock-cells = <0>;
>> +		compatible = "ti,gate-clock";
>> +		clocks = <&pad_clks_src_ck>;
>> +		ti,bit-shift = <8>;
>> +		reg = <0x0108>;
>> +	};
>
> All of the clock data should be underneath a "clocks {" node, for all of
> the chips.  Please see the Calxeda ECX clocks DT data as an example of how
> this should look:
>
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/ecx-common.dtsi#n141

Any reason why?

Should be relatively trivial to change though, however I am not too sure 
if this works:

&core_core_aon {
   &clocks {
     pad_clks_src_ck: ...
   };
};

... as I want to modify nodes under the structure. Does it?

-Tero

Re: [PATCHv10 22/41] ARM: dts: omap5 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the OMAP5 power,
> reset and clock manager (PRCM).
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 17fe896..3920087 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -107,6 +107,34 @@
>  		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>  
> +		prm: prm@4ae06000 {
> +			compatible = "ti,clock-master";

Same issues here with the compatible strings and separating out the clocks 
and clockdomain data into separate DT nodes, as discussed with the OMAP4 
data patch.


- Paul

[PATCHv10 22/41] ARM: dts: omap5 clock data

[Paul Walmsley]

On Tue, 26 Nov 2013, Tero Kristo wrote:

> This patch creates a unique node for each clock in the OMAP5 power,
> reset and clock manager (PRCM).
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 17fe896..3920087 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -107,6 +107,34 @@
>  		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>  
> +		prm: prm at 4ae06000 {
> +			compatible = "ti,clock-master";

Same issues here with the compatible strings and separating out the clocks 
and clockdomain data into separate DT nodes, as discussed with the OMAP4 
data patch.


- Paul

[PATCHv10 25/41] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock

[Tero Kristo]

From: J Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>

This patch changes apll_pcie_m2_ck to fixed factor
clock as there are no configurable divider associated to m2.

Signed-off-by: J Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
Tested-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 2fdb904..7708d84 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1183,13 +1183,10 @@
 
 	apll_pcie_m2_ck: apll_pcie_m2_ck {
 		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
+		compatible = "fixed-factor-clock";
 		clocks = <&apll_pcie_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0224>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
+		clock-mult = <1>;
+		clock-div = <1>;
 	};
 
 	dpll_per_ck: dpll_per_ck {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv10 25/41] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

This patch changes apll_pcie_m2_ck to fixed factor
clock as there are no configurable divider associated to m2.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 2fdb904..7708d84 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1183,13 +1183,10 @@
 
 	apll_pcie_m2_ck: apll_pcie_m2_ck {
 		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
+		compatible = "fixed-factor-clock";
 		clocks = <&apll_pcie_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0224>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
+		clock-mult = <1>;
+		clock-div = <1>;
 	};
 
 	dpll_per_ck: dpll_per_ck {
-- 
1.7.9.5

[PATCHv10 36/41] ARM: OMAP2+: io: use new clock init API

[Tero Kristo]

clk_init is now separated to a common function which gets called for all
SoC:s, which initializes the DT clocks and calls the SoC specific clock init.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/mach-omap2/common.h |    2 +-
 arch/arm/mach-omap2/io.c     |   32 +++++++++++++++++++++++---------
 arch/arm/mach-omap2/timer.c  |    6 ++----
 3 files changed, 26 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index f7644fe..5b44bcc 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -306,7 +306,7 @@ struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
 /* SoC specific clock initializer */
-extern int (*omap_clk_init)(void);
+int omap_clk_init(void);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3d9b3fc..7a394d7 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -55,10 +55,10 @@
 #include "prm44xx.h"
 
 /*
- * omap_clk_init: points to a function that does the SoC-specific
+ * omap_clk_soc_init: points to a function that does the SoC-specific
  * clock initializations
  */
-int (*omap_clk_init)(void);
+int (*omap_clk_soc_init)(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -419,7 +419,7 @@ void __init omap2420_init_early(void)
 	omap242x_clockdomains_init();
 	omap2420_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap2420_clk_init;
+	omap_clk_soc_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -448,7 +448,7 @@ void __init omap2430_init_early(void)
 	omap243x_clockdomains_init();
 	omap2430_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap2430_clk_init;
+	omap_clk_soc_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -482,7 +482,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap3xxx_clk_init;
+	omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -520,7 +520,7 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap3xxx_clk_init;
+	omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -581,7 +581,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = am33xx_clk_init;
+	omap_clk_soc_init = am33xx_clk_init;
 }
 
 void __init am33xx_init_late(void)
@@ -635,7 +635,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap4xxx_clk_init;
+	omap_clk_soc_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)
@@ -666,7 +666,7 @@ void __init omap5_init_early(void)
 	omap54xx_clockdomains_init();
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap5xxx_dt_clk_init;
+	omap_clk_soc_init = omap5xxx_dt_clk_init;
 }
 
 void __init omap5_init_late(void)
@@ -711,3 +711,17 @@ void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 		_omap2_init_reprogram_sdrc();
 	}
 }
+
+int __init omap_clk_init(void)
+{
+	int ret = 0;
+
+	if (!omap_clk_soc_init)
+		return 0;
+
+	ret = of_prcm_init();
+	if (!ret)
+		ret = omap_clk_soc_init();
+
+	return ret;
+}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 3ca81e0..60e5fc9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -570,8 +570,7 @@ static inline void __init realtime_counter_init(void)
 			       clksrc_nr, clksrc_src, clksrc_prop)	\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
-	if (omap_clk_init)						\
-		omap_clk_init();					\
+	omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,		\
@@ -582,8 +581,7 @@ void __init omap##name##_gptimer_timer_init(void)			\
 				clksrc_nr, clksrc_src, clksrc_prop)	\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
-	if (omap_clk_init)						\
-		omap_clk_init();					\
+	omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv10 36/41] ARM: OMAP2+: io: use new clock init API

[Tero Kristo]

clk_init is now separated to a common function which gets called for all
SoC:s, which initializes the DT clocks and calls the SoC specific clock init.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/common.h |    2 +-
 arch/arm/mach-omap2/io.c     |   32 +++++++++++++++++++++++---------
 arch/arm/mach-omap2/timer.c  |    6 ++----
 3 files changed, 26 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index f7644fe..5b44bcc 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -306,7 +306,7 @@ struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
 /* SoC specific clock initializer */
-extern int (*omap_clk_init)(void);
+int omap_clk_init(void);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3d9b3fc..7a394d7 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -55,10 +55,10 @@
 #include "prm44xx.h"
 
 /*
- * omap_clk_init: points to a function that does the SoC-specific
+ * omap_clk_soc_init: points to a function that does the SoC-specific
  * clock initializations
  */
-int (*omap_clk_init)(void);
+int (*omap_clk_soc_init)(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -419,7 +419,7 @@ void __init omap2420_init_early(void)
 	omap242x_clockdomains_init();
 	omap2420_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap2420_clk_init;
+	omap_clk_soc_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -448,7 +448,7 @@ void __init omap2430_init_early(void)
 	omap243x_clockdomains_init();
 	omap2430_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap2430_clk_init;
+	omap_clk_soc_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -482,7 +482,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap3xxx_clk_init;
+	omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -520,7 +520,7 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap3xxx_clk_init;
+	omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -581,7 +581,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = am33xx_clk_init;
+	omap_clk_soc_init = am33xx_clk_init;
 }
 
 void __init am33xx_init_late(void)
@@ -635,7 +635,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap4xxx_clk_init;
+	omap_clk_soc_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)
@@ -666,7 +666,7 @@ void __init omap5_init_early(void)
 	omap54xx_clockdomains_init();
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap5xxx_dt_clk_init;
+	omap_clk_soc_init = omap5xxx_dt_clk_init;
 }
 
 void __init omap5_init_late(void)
@@ -711,3 +711,17 @@ void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 		_omap2_init_reprogram_sdrc();
 	}
 }
+
+int __init omap_clk_init(void)
+{
+	int ret = 0;
+
+	if (!omap_clk_soc_init)
+		return 0;
+
+	ret = of_prcm_init();
+	if (!ret)
+		ret = omap_clk_soc_init();
+
+	return ret;
+}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 3ca81e0..60e5fc9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -570,8 +570,7 @@ static inline void __init realtime_counter_init(void)
 			       clksrc_nr, clksrc_src, clksrc_prop)	\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
-	if (omap_clk_init)						\
-		omap_clk_init();					\
+	omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,		\
@@ -582,8 +581,7 @@ void __init omap##name##_gptimer_timer_init(void)			\
 				clksrc_nr, clksrc_src, clksrc_prop)	\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
-	if (omap_clk_init)						\
-		omap_clk_init();					\
+	omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\
-- 
1.7.9.5

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Nishanth Menon]

On 11/26/2013 02:05 AM, Tero Kristo wrote:
> Hi,
> 
> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level
> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume
> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)

More testing (boot):
(uImage + dtb combined):
http://pastebin.mozilla.org/3681899 - AM37xx-evm
http://pastebin.mozilla.org/3681900 -> AM3517-evm (not sure yet how
long this has been broken).

zImage and dtbs: (boot tests):
http://pastebin.mozilla.org/3669889 -> omap5uevm
http://pastebin.mozilla.org/3669917 -> Panda-ES
http://pastebin.mozilla.org/3669928 -> Beagle-XM
http://pastebin.mozilla.org/3669939 -> BBBlack
http://pastebin.mozilla.org/3670104 ->AM335x-EVM

Other than these, ran a quick coccicheck
http://pastebin.mozilla.org/3682339
at least the kzalloc one seems to indicate a pending fix.

-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Nishanth Menon]

On 11/26/2013 02:05 AM, Tero Kristo wrote:
> Hi,
> 
> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level
> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume
> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)

More testing (boot):
(uImage + dtb combined):
http://pastebin.mozilla.org/3681899 - AM37xx-evm
http://pastebin.mozilla.org/3681900 -> AM3517-evm (not sure yet how
long this has been broken).

zImage and dtbs: (boot tests):
http://pastebin.mozilla.org/3669889 -> omap5uevm
http://pastebin.mozilla.org/3669917 -> Panda-ES
http://pastebin.mozilla.org/3669928 -> Beagle-XM
http://pastebin.mozilla.org/3669939 -> BBBlack
http://pastebin.mozilla.org/3670104 ->AM335x-EVM

Other than these, ran a quick coccicheck
http://pastebin.mozilla.org/3682339
at least the kzalloc one seems to indicate a pending fix.

-- 
Regards,
Nishanth Menon

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Paul Walmsley]

On Wed, 27 Nov 2013, Nishanth Menon wrote:

> http://pastebin.mozilla.org/3681900 -> AM3517-evm (not sure yet how
> long this has been broken).

Seems to work in v3.13-rc1:

http://www.pwsan.com/omap/testlogs/test_v3.13-rc1/20131124230250/boot/3517evm/3517evm_log.txt


- Paul
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Paul Walmsley]

On Wed, 27 Nov 2013, Nishanth Menon wrote:

> http://pastebin.mozilla.org/3681900 -> AM3517-evm (not sure yet how
> long this has been broken).

Seems to work in v3.13-rc1:

http://www.pwsan.com/omap/testlogs/test_v3.13-rc1/20131124230250/boot/3517evm/3517evm_log.txt


- Paul

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tony Lindgren]

* Paul Walmsley <paul@pwsan.com> [131128 10:59]:
> On Wed, 27 Nov 2013, Nishanth Menon wrote:
> 
> > http://pastebin.mozilla.org/3681900 -> AM3517-evm (not sure yet how
> > long this has been broken).
> 
> Seems to work in v3.13-rc1:
> 
> http://www.pwsan.com/omap/testlogs/test_v3.13-rc1/20131124230250/boot/3517evm/3517evm_log.txt

FYI, not really related to the clock patches, but we're also missing the .dtsi
file for 3517 currently for the device tree based booting. I'm planning to take
a look at that next week.

Regards,

Tony

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tony Lindgren]

* Paul Walmsley <paul@pwsan.com> [131128 10:59]:
> On Wed, 27 Nov 2013, Nishanth Menon wrote:
> 
> > http://pastebin.mozilla.org/3681900 -> AM3517-evm (not sure yet how
> > long this has been broken).
> 
> Seems to work in v3.13-rc1:
> 
> http://www.pwsan.com/omap/testlogs/test_v3.13-rc1/20131124230250/boot/3517evm/3517evm_log.txt

FYI, not really related to the clock patches, but we're also missing the .dtsi
file for 3517 currently for the device tree based booting. I'm planning to take
a look at that next week.

Regards,

Tony

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tero Kristo]

On 11/29/2013 07:12 PM, Tony Lindgren wrote:
> * Paul Walmsley <paul@pwsan.com> [131128 10:59]:
>> On Wed, 27 Nov 2013, Nishanth Menon wrote:
>>
>>> http://pastebin.mozilla.org/3681900 -> AM3517-evm (not sure yet how
>>> long this has been broken).
>>
>> Seems to work in v3.13-rc1:
>>
>> http://www.pwsan.com/omap/testlogs/test_v3.13-rc1/20131124230250/boot/3517evm/3517evm_log.txt
>
> FYI, not really related to the clock patches, but we're also missing the .dtsi
> file for 3517 currently for the device tree based booting. I'm planning to take
> a look at that next week.

Yea I would guess this prevents this set from working also on that board. :)

-Tero

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tero Kristo]

On 11/29/2013 07:12 PM, Tony Lindgren wrote:
> * Paul Walmsley <paul@pwsan.com> [131128 10:59]:
>> On Wed, 27 Nov 2013, Nishanth Menon wrote:
>>
>>> http://pastebin.mozilla.org/3681900 -> AM3517-evm (not sure yet how
>>> long this has been broken).
>>
>> Seems to work in v3.13-rc1:
>>
>> http://www.pwsan.com/omap/testlogs/test_v3.13-rc1/20131124230250/boot/3517evm/3517evm_log.txt
>
> FYI, not really related to the clock patches, but we're also missing the .dtsi
> file for 3517 currently for the device tree based booting. I'm planning to take
> a look at that next week.

Yea I would guess this prevents this set from working also on that board. :)

-Tero

[PATCHv10 37/41] ARM: OMAP4: remove old clock data and link in new clock init code

[Tero Kristo]

OMAP4 clocks have now been moved to DT, thus remove the old data file
and use the new init code under drivers/clk/omap/clk-44xx.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile          |    2 +-
 arch/arm/mach-omap2/cclock44xx_data.c | 1735 ---------------------------------
 arch/arm/mach-omap2/io.c              |    2 +-
 3 files changed, 2 insertions(+), 1737 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/cclock44xx_data.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1f25f3e..e81cb52ac 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o cclock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) cclock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
 obj-$(CONFIG_SOC_AM33XX)		+= cclock33xx_data.o
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
deleted file mode 100644
index ec0dc0b..0000000
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ /dev/null
@@ -1,1735 +0,0 @@
-/*
- * OMAP4 Clock data
- *
- * Copyright (C) 2009-2012 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Mike Turquette (mturquette@ti.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX Some of the ES1 clocks have been removed/changed; once support
- * is added for discriminating clocks by ES level, these should be added back
- * in.
- *
- * XXX All of the remaining MODULEMODE clock nodes should be removed
- * once the drivers are updated to use pm_runtime or to use the appropriate
- * upstream clock node for rate/parent selection.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk-private.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock44xx.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "cm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "control.h"
-#include "scrm44xx.h"
-
-/* OMAP4 modulemode control */
-#define OMAP4430_MODULEMODE_HWCTRL_SHIFT		0
-#define OMAP4430_MODULEMODE_SWCTRL_SHIFT		1
-
-/*
- * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
- * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
- * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
- * half of this value.
- */
-#define OMAP4_DPLL_ABE_DEFFREQ				98304000
-
-/*
- * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
- * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
- * locked frequency for the USB DPLL is 960MHz.
- */
-#define OMAP4_DPLL_USB_DEFFREQ				960000000
-
-/* Root clocks */
-
-DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(pad_clks_src_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_GATE(pad_clks_ck, "pad_clks_src_ck", &pad_clks_src_ck, 0x0,
-		OMAP4430_CM_CLKSEL_ABE, OMAP4430_PAD_CLKS_GATE_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_FIXED_RATE(pad_slimbus_core_clks_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(secure_32k_clk_src_ck, CLK_IS_ROOT, 32768, 0x0);
-
-DEFINE_CLK_FIXED_RATE(slimbus_src_clk, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_GATE(slimbus_clk, "slimbus_src_clk", &slimbus_src_clk, 0x0,
-		OMAP4430_CM_CLKSEL_ABE, OMAP4430_SLIMBUS_CLK_GATE_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_FIXED_RATE(sys_32k_ck, CLK_IS_ROOT, 32768, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_12000000_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_13000000_ck, CLK_IS_ROOT, 13000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_16800000_ck, CLK_IS_ROOT, 16800000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_27000000_ck, CLK_IS_ROOT, 27000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_38400000_ck, CLK_IS_ROOT, 38400000, 0x0);
-
-static const char *sys_clkin_ck_parents[] = {
-	"virt_12000000_ck", "virt_13000000_ck", "virt_16800000_ck",
-	"virt_19200000_ck", "virt_26000000_ck", "virt_27000000_ck",
-	"virt_38400000_ck",
-};
-
-DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_SYS_CLKSEL, OMAP4430_SYS_CLKSEL_SHIFT,
-	       OMAP4430_SYS_CLKSEL_WIDTH, CLK_MUX_INDEX_ONE, NULL);
-
-DEFINE_CLK_FIXED_RATE(tie_low_clock_ck, CLK_IS_ROOT, 0, 0x0);
-
-DEFINE_CLK_FIXED_RATE(utmi_phy_clkout_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60mhsp1_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60mhsp2_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60motg_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-/* Module clocks and DPLL outputs */
-
-static const char *abe_dpll_bypass_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "sys_32k_ck",
-};
-
-DEFINE_CLK_MUX(abe_dpll_bypass_clk_mux_ck, abe_dpll_bypass_clk_mux_ck_parents,
-	       NULL, 0x0, OMAP4430_CM_L4_WKUP_CLKSEL, OMAP4430_CLKSEL_SHIFT,
-	       OMAP4430_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(abe_dpll_refclk_mux_ck, abe_dpll_bypass_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_ABE_PLL_REF_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-/* DPLL_ABE */
-static struct dpll_data dpll_abe_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_ABE,
-	.clk_bypass	= &abe_dpll_bypass_clk_mux_ck,
-	.clk_ref	= &abe_dpll_refclk_mux_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_ABE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_ABE,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_ABE,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.m4xen_mask	= OMAP4430_DPLL_REGM4XEN_MASK,
-	.lpmode_mask	= OMAP4430_DPLL_LPMODE_EN_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static const char *dpll_abe_ck_parents[] = {
-	"abe_dpll_refclk_mux_ck",
-};
-
-static struct clk dpll_abe_ck;
-
-static const struct clk_ops dpll_abe_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap4_dpll_regm4xen_recalc,
-	.round_rate	= &omap4_dpll_regm4xen_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_abe_ck_hw = {
-	.hw = {
-		.clk = &dpll_abe_ck,
-	},
-	.dpll_data	= &dpll_abe_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_abe_ck, dpll_abe_ck_parents, dpll_abe_ck_ops);
-
-static const char *dpll_abe_x2_ck_parents[] = {
-	"dpll_abe_ck",
-};
-
-static struct clk dpll_abe_x2_ck;
-
-static const struct clk_ops dpll_abe_x2_ck_ops = {
-	.recalc_rate	= &omap3_clkoutx2_recalc,
-};
-
-static struct clk_hw_omap dpll_abe_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_abe_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_abe_x2_ck, dpll_abe_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-static const struct clk_ops omap_hsdivider_ops = {
-	.set_rate	= &omap2_clksel_set_rate,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-};
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_abe_m2x2_ck, "dpll_abe_x2_ck", &dpll_abe_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M2_DPLL_ABE,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(abe_24m_fclk, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck,
-			0x0, 1, 8);
-
-DEFINE_CLK_DIVIDER(abe_clk, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_ABE, OMAP4430_CLKSEL_OPP_SHIFT,
-		   OMAP4430_CLKSEL_OPP_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_DIVIDER(aess_fclk, "abe_clk", &abe_clk, 0x0,
-		   OMAP4430_CM1_ABE_AESS_CLKCTRL,
-		   OMAP4430_CLKSEL_AESS_FCLK_SHIFT,
-		   OMAP4430_CLKSEL_AESS_FCLK_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_abe_m3x2_ck, "dpll_abe_x2_ck", &dpll_abe_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M3_DPLL_ABE,
-			  OMAP4430_DPLL_CLKOUTHIF_DIV_MASK);
-
-static const char *core_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "dpll_abe_m3x2_ck",
-};
-
-DEFINE_CLK_MUX(core_hsd_byp_clk_mux_ck, core_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_CORE,
-	       OMAP4430_DPLL_BYP_CLKSEL_SHIFT, OMAP4430_DPLL_BYP_CLKSEL_WIDTH,
-	       0x0, NULL);
-
-/* DPLL_CORE */
-static struct dpll_data dpll_core_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
-	.clk_bypass	= &core_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_CORE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_CORE,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_CORE,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static const char *dpll_core_ck_parents[] = {
-	"sys_clkin_ck", "core_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_core_ck;
-
-static const struct clk_ops dpll_core_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_core_ck_hw = {
-	.hw = {
-		.clk = &dpll_core_ck,
-	},
-	.dpll_data	= &dpll_core_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops);
-
-static const char *dpll_core_x2_ck_parents[] = {
-	"dpll_core_ck",
-};
-
-static struct clk dpll_core_x2_ck;
-
-static struct clk_hw_omap dpll_core_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_core_x2_ck,
-	},
-};
-
-DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m6x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M6_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m2_ck, "dpll_core_ck", &dpll_core_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_CORE,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(ddrphy_ck, "dpll_core_m2_ck", &dpll_core_m2_ck, 0x0, 1,
-			2);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m5x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M5_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT,
-		   OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
-		   0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT,
-		   OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
-		   0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT,
-		   OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m4x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M4_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(dll_clk_div_ck, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck,
-			0x0, 1, 2);
-
-DEFINE_CLK_DIVIDER(dpll_abe_m2_ck, "dpll_abe_ck", &dpll_abe_ck, 0x0,
-		   OMAP4430_CM_DIV_M2_DPLL_ABE, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
-		   OMAP4430_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-static const struct clk_ops dpll_hsd_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static const struct clk_ops func_dmic_abe_gfclk_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-};
-
-static const char *dpll_core_m3x2_ck_parents[] = {
-	"dpll_core_x2_ck",
-};
-
-static const struct clksel dpll_core_m3x2_div[] = {
-	{ .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-/* XXX Missing round_rate, set_rate in ops */
-DEFINE_CLK_OMAP_MUX_GATE(dpll_core_m3x2_ck, NULL, dpll_core_m3x2_div,
-			 OMAP4430_CM_DIV_M3_DPLL_CORE,
-			 OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-			 OMAP4430_CM_DIV_M3_DPLL_CORE,
-			 OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL,
-			 dpll_core_m3x2_ck_parents, dpll_hsd_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m7x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M7_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK);
-
-static const char *iva_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "div_iva_hs_clk",
-};
-
-DEFINE_CLK_MUX(iva_hsd_byp_clk_mux_ck, iva_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_IVA, OMAP4430_DPLL_BYP_CLKSEL_SHIFT,
-	       OMAP4430_DPLL_BYP_CLKSEL_WIDTH, 0x0, NULL);
-
-/* DPLL_IVA */
-static struct dpll_data dpll_iva_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
-	.clk_bypass	= &iva_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_IVA,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_IVA,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_IVA,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_iva_ck_parents[] = {
-	"sys_clkin_ck", "iva_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_iva_ck;
-
-static const struct clk_ops dpll_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_iva_ck_hw = {
-	.hw = {
-		.clk = &dpll_iva_ck,
-	},
-	.dpll_data	= &dpll_iva_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops);
-
-static const char *dpll_iva_x2_ck_parents[] = {
-	"dpll_iva_ck",
-};
-
-static struct clk dpll_iva_x2_ck;
-
-static struct clk_hw_omap dpll_iva_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_iva_x2_ck,
-	},
-};
-
-DEFINE_STRUCT_CLK(dpll_iva_x2_ck, dpll_iva_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_iva_m4x2_ck, "dpll_iva_x2_ck", &dpll_iva_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M4_DPLL_IVA,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_iva_m5x2_ck, "dpll_iva_x2_ck", &dpll_iva_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M5_DPLL_IVA,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-/* DPLL_MPU */
-static struct dpll_data dpll_mpu_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_MPU,
-	.clk_bypass	= &div_mpu_hs_clk,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_MPU,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_MPU,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_MPU,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_mpu_ck_parents[] = {
-	"sys_clkin_ck", "div_mpu_hs_clk"
-};
-
-static struct clk dpll_mpu_ck;
-
-static struct clk_hw_omap dpll_mpu_ck_hw = {
-	.hw = {
-		.clk = &dpll_mpu_ck,
-	},
-	.dpll_data	= &dpll_mpu_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops);
-
-DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_MPU,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(per_hs_clk_div_ck, "dpll_abe_m3x2_ck",
-			&dpll_abe_m3x2_ck, 0x0, 1, 2);
-
-static const char *per_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "per_hs_clk_div_ck",
-};
-
-DEFINE_CLK_MUX(per_hsd_byp_clk_mux_ck, per_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_PER, OMAP4430_DPLL_BYP_CLKSEL_SHIFT,
-	       OMAP4430_DPLL_BYP_CLKSEL_WIDTH, 0x0, NULL);
-
-/* DPLL_PER */
-static struct dpll_data dpll_per_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
-	.clk_bypass	= &per_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_PER,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_PER,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_PER,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_per_ck_parents[] = {
-	"sys_clkin_ck", "per_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_per_ck;
-
-static struct clk_hw_omap dpll_per_ck_hw = {
-	.hw = {
-		.clk = &dpll_per_ck,
-	},
-	.dpll_data	= &dpll_per_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops);
-
-DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		   OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
-		   OMAP4430_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-static const char *dpll_per_x2_ck_parents[] = {
-	"dpll_per_ck",
-};
-
-static struct clk dpll_per_x2_ck;
-
-static struct clk_hw_omap dpll_per_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_per_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_x2_ck, dpll_per_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m2x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M2_DPLL_PER,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-static const char *dpll_per_m3x2_ck_parents[] = {
-	"dpll_per_x2_ck",
-};
-
-static const struct clksel dpll_per_m3x2_div[] = {
-	{ .parent = &dpll_per_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-/* XXX Missing round_rate, set_rate in ops */
-DEFINE_CLK_OMAP_MUX_GATE(dpll_per_m3x2_ck, NULL, dpll_per_m3x2_div,
-			 OMAP4430_CM_DIV_M3_DPLL_PER,
-			 OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-			 OMAP4430_CM_DIV_M3_DPLL_PER,
-			 OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL,
-			 dpll_per_m3x2_ck_parents, dpll_hsd_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m4x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M4_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m5x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M5_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m6x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M6_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m7x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M7_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(usb_hs_clk_div_ck, "dpll_abe_m3x2_ck",
-			&dpll_abe_m3x2_ck, 0x0, 1, 3);
-
-/* DPLL_USB */
-static struct dpll_data dpll_usb_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_USB,
-	.clk_bypass	= &usb_hs_clk_div_ck,
-	.flags		= DPLL_J_TYPE,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_USB,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_USB,
-	.mult_mask	= OMAP4430_DPLL_MULT_USB_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_0_7_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.sddiv_mask	= OMAP4430_DPLL_SD_DIV_MASK,
-	.max_multiplier	= 4095,
-	.max_divider	= 256,
-	.min_divider	= 1,
-};
-
-static const char *dpll_usb_ck_parents[] = {
-	"sys_clkin_ck", "usb_hs_clk_div_ck"
-};
-
-static struct clk dpll_usb_ck;
-
-static const struct clk_ops dpll_usb_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap dpll_usb_ck_hw = {
-	.hw = {
-		.clk = &dpll_usb_ck,
-	},
-	.dpll_data	= &dpll_usb_dd,
-	.clkdm_name	= "l3_init_clkdm",
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_usb_ck_ops);
-
-static const char *dpll_usb_clkdcoldo_ck_parents[] = {
-	"dpll_usb_ck",
-};
-
-static struct clk dpll_usb_clkdcoldo_ck;
-
-static const struct clk_ops dpll_usb_clkdcoldo_ck_ops = {
-};
-
-static struct clk_hw_omap dpll_usb_clkdcoldo_ck_hw = {
-	.hw = {
-		.clk = &dpll_usb_clkdcoldo_ck,
-	},
-	.clksel_reg	= OMAP4430_CM_CLKDCOLDO_DPLL_USB,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_usb_clkdcoldo_ck, dpll_usb_clkdcoldo_ck_parents,
-		  dpll_usb_clkdcoldo_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_usb_m2_ck, "dpll_usb_ck", &dpll_usb_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_USB,
-			  OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK);
-
-static const char *ducati_clk_mux_ck_parents[] = {
-	"div_core_ck", "dpll_per_m6x2_ck",
-};
-
-DEFINE_CLK_MUX(ducati_clk_mux_ck, ducati_clk_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(func_12m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 16);
-
-DEFINE_CLK_FIXED_FACTOR(func_24m_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0,
-			1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(func_24mc_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 8);
-
-static const struct clk_div_table func_48m_fclk_rates[] = {
-	{ .div = 4, .val = 0 },
-	{ .div = 8, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_48m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_48m_fclk_rates,
-			 NULL);
-
-DEFINE_CLK_FIXED_FACTOR(func_48mc_fclk,	"dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 4);
-
-static const struct clk_div_table func_64m_fclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 4, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_64m_fclk, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_64m_fclk_rates,
-			 NULL);
-
-static const struct clk_div_table func_96m_fclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 4, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_96m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_96m_fclk_rates,
-			 NULL);
-
-static const struct clk_div_table init_60m_fclk_rates[] = {
-	{ .div = 1, .val = 0 },
-	{ .div = 8, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(init_60m_fclk, "dpll_usb_m2_ck", &dpll_usb_m2_ck,
-			 0x0, OMAP4430_CM_CLKSEL_USB_60MHZ,
-			 OMAP4430_CLKSEL_0_0_SHIFT, OMAP4430_CLKSEL_0_0_WIDTH,
-			 0x0, init_60m_fclk_rates, NULL);
-
-DEFINE_CLK_DIVIDER(l3_div_ck, "div_core_ck", &div_core_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_L3_SHIFT,
-		   OMAP4430_CLKSEL_L3_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(l4_div_ck, "l3_div_ck", &l3_div_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_L4_SHIFT,
-		   OMAP4430_CLKSEL_L4_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(lp_clk_div_ck, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck,
-			0x0, 1, 16);
-
-static const char *l4_wkup_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "lp_clk_div_ck",
-};
-
-DEFINE_CLK_MUX(l4_wkup_clk_mux_ck, l4_wkup_clk_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_L4_WKUP_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-static const struct clk_div_table ocp_abe_iclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 1, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(ocp_abe_iclk, "aess_fclk", &aess_fclk, 0x0,
-			 OMAP4430_CM1_ABE_AESS_CLKCTRL,
-			 OMAP4430_CLKSEL_AESS_FCLK_SHIFT,
-			 OMAP4430_CLKSEL_AESS_FCLK_WIDTH,
-			 0x0, ocp_abe_iclk_rates, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(per_abe_24m_fclk, "dpll_abe_m2_ck", &dpll_abe_m2_ck,
-			0x0, 1, 4);
-
-DEFINE_CLK_DIVIDER(per_abe_nc_fclk, "dpll_abe_m2_ck", &dpll_abe_m2_ck, 0x0,
-		   OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-		   OMAP4430_SCALE_FCLK_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
-		   OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-		   OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-static const char *dbgclk_mux_ck_parents[] = {
-	"sys_clkin_ck"
-};
-
-static struct clk dbgclk_mux_ck;
-DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL);
-DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents,
-		  dpll_usb_clkdcoldo_ck_ops);
-
-/* Leaf clocks controlled by modules */
-
-DEFINE_CLK_GATE(aes1_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_AES1_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(aes2_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_AES2_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(bandgap_fclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-		OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT, 0x0, NULL);
-
-static const struct clk_div_table div_ts_ck_rates[] = {
-	{ .div = 8, .val = 0 },
-	{ .div = 16, .val = 1 },
-	{ .div = 32, .val = 2 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(div_ts_ck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-			 0x0, OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-			 OMAP4430_CLKSEL_24_25_SHIFT,
-			 OMAP4430_CLKSEL_24_25_WIDTH, 0x0, div_ts_ck_rates,
-			 NULL);
-
-DEFINE_CLK_GATE(bandgap_ts_fclk, "div_ts_ck", &div_ts_ck, 0x0,
-		OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-		OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT,
-		0x0, NULL);
-
-static const char *dmic_sync_mux_ck_parents[] = {
-	"abe_24m_fclk", "syc_clk_div_ck", "func_24m_clk",
-};
-
-DEFINE_CLK_MUX(dmic_sync_mux_ck, dmic_sync_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM1_ABE_DMIC_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_dmic_abe_gfclk_sel[] = {
-	{ .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_dmic_abe_gfclk_parents[] = {
-	"dmic_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_dmic_abe_gfclk, "abe_clkdm", func_dmic_abe_gfclk_sel,
-		    OMAP4430_CM1_ABE_DMIC_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK,
-		    func_dmic_abe_gfclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_GATE(dss_sys_clk, "syc_clk_div_ck", &syc_clk_div_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dss_tv_clk, "extalt_clkin_ck", &extalt_clkin_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck,
-		CLK_SET_RATE_PARENT,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(dss_48mhz_clk, "func_48mc_fclk", &func_48mc_fclk, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(dss_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_DIVIDER(fdif_fck, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, 0x0,
-		   OMAP4430_CM_CAM_FDIF_CLKCTRL, OMAP4430_CLKSEL_FCLK_SHIFT,
-		   OMAP4430_CLKSEL_FCLK_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_GATE(gpio1_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
-		OMAP4430_OPTFCLKEN_DBCLK_SHIFT,	0x0, NULL);
-
-DEFINE_CLK_GATE(gpio2_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO2_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio3_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
-		OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio4_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO4_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio5_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO5_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio6_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO6_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-static const struct clksel sgx_clk_mux_sel[] = {
-	{ .parent = &dpll_core_m7x2_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m7x2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *sgx_clk_mux_parents[] = {
-	"dpll_core_m7x2_ck", "dpll_per_m7x2_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(sgx_clk_mux, "l3_gfx_clkdm", sgx_clk_mux_sel,
-		    OMAP4430_CM_GFX_GFX_CLKCTRL, OMAP4430_CLKSEL_SGX_FCLK_MASK,
-		    sgx_clk_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_DIVIDER(hsi_fck, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, 0x0,
-		   OMAP4430_CM_L3INIT_HSI_CLKCTRL, OMAP4430_CLKSEL_24_25_SHIFT,
-		   OMAP4430_CLKSEL_24_25_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-DEFINE_CLK_GATE(iss_ctrlclk, "func_96m_fclk", &func_96m_fclk, 0x0,
-		OMAP4430_CM_CAM_ISS_CLKCTRL, OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_MUX(mcasp_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCASP_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcasp_abe_gfclk_sel[] = {
-	{ .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcasp_abe_gfclk_parents[] = {
-	"mcasp_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcasp_abe_gfclk, "abe_clkdm", func_mcasp_abe_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCASP_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK,
-		    func_mcasp_abe_gfclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp1_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp1_gfclk_sel[] = {
-	{ .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp1_gfclk_parents[] = {
-	"mcbsp1_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp1_gfclk, "abe_clkdm", func_mcbsp1_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp1_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp2_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp2_gfclk_sel[] = {
-	{ .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp2_gfclk_parents[] = {
-	"mcbsp2_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp2_gfclk, "abe_clkdm", func_mcbsp2_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp2_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp3_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp3_gfclk_sel[] = {
-	{ .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp3_gfclk_parents[] = {
-	"mcbsp3_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp3_gfclk, "abe_clkdm", func_mcbsp3_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp3_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const char *mcbsp4_sync_mux_ck_parents[] = {
-	"func_96m_fclk", "per_abe_nc_fclk",
-};
-
-DEFINE_CLK_MUX(mcbsp4_sync_mux_ck, mcbsp4_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel per_mcbsp4_gfclk_sel[] = {
-	{ .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *per_mcbsp4_gfclk_parents[] = {
-	"mcbsp4_sync_mux_ck", "pad_clks_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(per_mcbsp4_gfclk, "l4_per_clkdm", per_mcbsp4_gfclk_sel,
-		    OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_24_24_MASK, per_mcbsp4_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const struct clksel hsmmc1_fclk_sel[] = {
-	{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
-	{ .parent = &func_96m_fclk, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *hsmmc1_fclk_parents[] = {
-	"func_64m_fclk", "func_96m_fclk",
-};
-
-DEFINE_CLK_OMAP_MUX(hsmmc1_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
-		    OMAP4430_CM_L3INIT_MMC1_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
-		    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_1, "func_24m_clk", &func_24m_clk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK1_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_0, "abe_24m_fclk", &abe_24m_fclk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK0_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_2, "pad_clks_ck", &pad_clks_ck, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK2_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_slimbus_clk, "slimbus_clk", &slimbus_clk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_fclk_1, "per_abe_24m_fclk", &per_abe_24m_fclk, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_fclk_0, "func_24mc_fclk", &func_24mc_fclk, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_slimbus_clk, "pad_slimbus_core_clks_ck",
-		&pad_slimbus_core_clks_ck, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_core_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_iva_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_mpu_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-static const struct clksel dmt1_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-DEFINE_CLK_OMAP_MUX(dmt1_clk_mux, "l4_wkup_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_WKUP_TIMER1_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm10_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm11_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm2_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm3_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm4_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const struct clksel timer5_sync_mux_sel[] = {
-	{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer5_sync_mux_parents[] = {
-	"syc_clk_div_ck", "sys_32k_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(timer5_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER5_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer6_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER6_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer7_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER7_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer8_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER8_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm9_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static struct clk usb_host_fs_fck;
-
-static const char *usb_host_fs_fck_parent_names[] = {
-	"func_48mc_fclk",
-};
-
-static const struct clk_ops usb_host_fs_fck_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-};
-
-static struct clk_hw_omap usb_host_fs_fck_hw = {
-	.hw = {
-		.clk = &usb_host_fs_fck,
-	},
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-};
-
-DEFINE_STRUCT_CLK(usb_host_fs_fck, usb_host_fs_fck_parent_names,
-		  usb_host_fs_fck_ops);
-
-static const char *utmi_p1_gfclk_parents[] = {
-	"init_60m_fclk", "xclk60mhsp1_ck",
-};
-
-DEFINE_CLK_MUX(utmi_p1_gfclk, utmi_p1_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	       OMAP4430_CLKSEL_UTMI_P1_SHIFT, OMAP4430_CLKSEL_UTMI_P1_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p1_clk, "utmi_p1_gfclk", &utmi_p1_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT, 0x0, NULL);
-
-static const char *utmi_p2_gfclk_parents[] = {
-	"init_60m_fclk", "xclk60mhsp2_ck",
-};
-
-DEFINE_CLK_MUX(utmi_p2_gfclk, utmi_p2_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	       OMAP4430_CLKSEL_UTMI_P2_SHIFT, OMAP4430_CLKSEL_UTMI_P2_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p2_clk, "utmi_p2_gfclk", &utmi_p2_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p3_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic480m_p1_clk, "dpll_usb_m2_ck",
-		&dpll_usb_m2_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic60m_p1_clk, "init_60m_fclk",
-		&init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic60m_p2_clk, "init_60m_fclk",
-		&init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic480m_p2_clk, "dpll_usb_m2_ck",
-		&dpll_usb_m2_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_func48mclk, "func_48mc_fclk", &func_48mc_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_fck, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-static const char *otg_60m_gfclk_parents[] = {
-	"utmi_phy_clkout_ck", "xclk60motg_ck",
-};
-
-DEFINE_CLK_MUX(otg_60m_gfclk, otg_60m_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, OMAP4430_CLKSEL_60M_SHIFT,
-	       OMAP4430_CLKSEL_60M_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_otg_hs_xclk, "otg_60m_gfclk", &otg_60m_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-		OMAP4430_OPTFCLKEN_XCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_otg_hs_ick, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-		OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_phy_cm_clk32k, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_ALWON_USBPHY_CLKCTRL,
-		OMAP4430_OPTFCLKEN_CLK32K_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch2_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch0_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch1_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_ick, "l4_div_ck", &l4_div_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
-
-static const struct clk_div_table usim_ck_rates[] = {
-	{ .div = 14, .val = 0 },
-	{ .div = 18, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(usim_ck, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, 0x0,
-			 OMAP4430_CM_WKUP_USIM_CLKCTRL,
-			 OMAP4430_CLKSEL_DIV_SHIFT, OMAP4430_CLKSEL_DIV_WIDTH,
-			 0x0, usim_ck_rates, NULL);
-
-DEFINE_CLK_GATE(usim_fclk, "usim_ck", &usim_ck, 0x0,
-		OMAP4430_CM_WKUP_USIM_CLKCTRL, OMAP4430_OPTFCLKEN_FCLK_SHIFT,
-		0x0, NULL);
-
-/* Remaining optional clocks */
-static const char *pmd_stm_clock_mux_ck_parents[] = {
-	"sys_clkin_ck", "dpll_core_m6x2_ck", "tie_low_clock_ck",
-};
-
-DEFINE_CLK_MUX(pmd_stm_clock_mux_ck, pmd_stm_clock_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, OMAP4430_PMD_STM_MUX_CTRL_SHIFT,
-	       OMAP4430_PMD_STM_MUX_CTRL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(pmd_trace_clk_mux_ck, pmd_stm_clock_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	       OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT,
-	       OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(stm_clk_div_ck, "pmd_stm_clock_mux_ck",
-		   &pmd_stm_clock_mux_ck, 0x0, OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-		   OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT,
-		   OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-static const char *trace_clk_div_ck_parents[] = {
-	"pmd_trace_clk_mux_ck",
-};
-
-static const struct clksel trace_clk_div_div[] = {
-	{ .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk trace_clk_div_ck;
-
-static const struct clk_ops trace_clk_div_ck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-	.init		= &omap2_init_clk_clkdm,
-	.enable		= &omap2_clkops_enable_clkdm,
-	.disable	= &omap2_clkops_disable_clkdm,
-};
-
-static struct clk_hw_omap trace_clk_div_ck_hw = {
-	.hw = {
-		.clk = &trace_clk_div_ck,
-	},
-	.clkdm_name	= "emu_sys_clkdm",
-	.clksel		= trace_clk_div_div,
-	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
-};
-
-DEFINE_STRUCT_CLK(trace_clk_div_ck, trace_clk_div_ck_parents,
-		  trace_clk_div_ck_ops);
-
-/* SCRM aux clk nodes */
-
-static const struct clksel auxclk_src_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m3x2_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m3x2_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *auxclk_src_ck_parents[] = {
-	"sys_clkin_ck", "dpll_core_m3x2_ck", "dpll_per_m3x2_ck",
-};
-
-static const struct clk_ops auxclk_src_ck_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk0_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK0, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK0, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk0_ck, "auxclk0_src_ck", &auxclk0_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK0, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk1_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK1, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK1, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk1_ck, "auxclk1_src_ck", &auxclk1_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK1, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk2_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK2, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK2, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk2_ck, "auxclk2_src_ck", &auxclk2_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK2, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk3_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK3, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK3, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk3_ck, "auxclk3_src_ck", &auxclk3_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK3, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk4_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK4, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK4, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk4_ck, "auxclk4_src_ck", &auxclk4_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK4, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk5_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK5, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK5, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk5_ck, "auxclk5_src_ck", &auxclk5_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK5, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-static const char *auxclkreq_ck_parents[] = {
-	"auxclk0_ck", "auxclk1_ck", "auxclk2_ck", "auxclk3_ck", "auxclk4_ck",
-	"auxclk5_ck",
-};
-
-DEFINE_CLK_MUX(auxclkreq0_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ0, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq1_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ1, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq2_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ2, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq3_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ3, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq4_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ4, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq5_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ5, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-/*
- * clocks specific to omap4460
- */
-static struct omap_clk omap446x_clks[] = {
-	CLK(NULL,	"div_ts_ck",			&div_ts_ck),
-	CLK(NULL,	"bandgap_ts_fclk",		&bandgap_ts_fclk),
-};
-
-/*
- * clocks specific to omap4430
- */
-static struct omap_clk omap443x_clks[] = {
-	CLK(NULL,	"bandgap_fclk",			&bandgap_fclk),
-};
-
-/*
- * clocks common to omap44xx
- */
-static struct omap_clk omap44xx_clks[] = {
-	CLK(NULL,	"extalt_clkin_ck",		&extalt_clkin_ck),
-	CLK(NULL,	"pad_clks_src_ck",		&pad_clks_src_ck),
-	CLK(NULL,	"pad_clks_ck",			&pad_clks_ck),
-	CLK(NULL,	"pad_slimbus_core_clks_ck",	&pad_slimbus_core_clks_ck),
-	CLK(NULL,	"secure_32k_clk_src_ck",	&secure_32k_clk_src_ck),
-	CLK(NULL,	"slimbus_src_clk",		&slimbus_src_clk),
-	CLK(NULL,	"slimbus_clk",			&slimbus_clk),
-	CLK(NULL,	"sys_32k_ck",			&sys_32k_ck),
-	CLK(NULL,	"virt_12000000_ck",		&virt_12000000_ck),
-	CLK(NULL,	"virt_13000000_ck",		&virt_13000000_ck),
-	CLK(NULL,	"virt_16800000_ck",		&virt_16800000_ck),
-	CLK(NULL,	"virt_19200000_ck",		&virt_19200000_ck),
-	CLK(NULL,	"virt_26000000_ck",		&virt_26000000_ck),
-	CLK(NULL,	"virt_27000000_ck",		&virt_27000000_ck),
-	CLK(NULL,	"virt_38400000_ck",		&virt_38400000_ck),
-	CLK(NULL,	"sys_clkin_ck",			&sys_clkin_ck),
-	CLK(NULL,	"tie_low_clock_ck",		&tie_low_clock_ck),
-	CLK(NULL,	"utmi_phy_clkout_ck",		&utmi_phy_clkout_ck),
-	CLK(NULL,	"xclk60mhsp1_ck",		&xclk60mhsp1_ck),
-	CLK(NULL,	"xclk60mhsp2_ck",		&xclk60mhsp2_ck),
-	CLK(NULL,	"xclk60motg_ck",		&xclk60motg_ck),
-	CLK(NULL,	"abe_dpll_bypass_clk_mux_ck",	&abe_dpll_bypass_clk_mux_ck),
-	CLK(NULL,	"abe_dpll_refclk_mux_ck",	&abe_dpll_refclk_mux_ck),
-	CLK(NULL,	"dpll_abe_ck",			&dpll_abe_ck),
-	CLK(NULL,	"dpll_abe_x2_ck",		&dpll_abe_x2_ck),
-	CLK(NULL,	"dpll_abe_m2x2_ck",		&dpll_abe_m2x2_ck),
-	CLK(NULL,	"abe_24m_fclk",			&abe_24m_fclk),
-	CLK(NULL,	"abe_clk",			&abe_clk),
-	CLK(NULL,	"aess_fclk",			&aess_fclk),
-	CLK(NULL,	"dpll_abe_m3x2_ck",		&dpll_abe_m3x2_ck),
-	CLK(NULL,	"core_hsd_byp_clk_mux_ck",	&core_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_core_ck",			&dpll_core_ck),
-	CLK(NULL,	"dpll_core_x2_ck",		&dpll_core_x2_ck),
-	CLK(NULL,	"dpll_core_m6x2_ck",		&dpll_core_m6x2_ck),
-	CLK(NULL,	"dbgclk_mux_ck",		&dbgclk_mux_ck),
-	CLK(NULL,	"dpll_core_m2_ck",		&dpll_core_m2_ck),
-	CLK(NULL,	"ddrphy_ck",			&ddrphy_ck),
-	CLK(NULL,	"dpll_core_m5x2_ck",		&dpll_core_m5x2_ck),
-	CLK(NULL,	"div_core_ck",			&div_core_ck),
-	CLK(NULL,	"div_iva_hs_clk",		&div_iva_hs_clk),
-	CLK(NULL,	"div_mpu_hs_clk",		&div_mpu_hs_clk),
-	CLK(NULL,	"dpll_core_m4x2_ck",		&dpll_core_m4x2_ck),
-	CLK(NULL,	"dll_clk_div_ck",		&dll_clk_div_ck),
-	CLK(NULL,	"dpll_abe_m2_ck",		&dpll_abe_m2_ck),
-	CLK(NULL,	"dpll_core_m3x2_ck",		&dpll_core_m3x2_ck),
-	CLK(NULL,	"dpll_core_m7x2_ck",		&dpll_core_m7x2_ck),
-	CLK(NULL,	"iva_hsd_byp_clk_mux_ck",	&iva_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_iva_ck",			&dpll_iva_ck),
-	CLK(NULL,	"dpll_iva_x2_ck",		&dpll_iva_x2_ck),
-	CLK(NULL,	"dpll_iva_m4x2_ck",		&dpll_iva_m4x2_ck),
-	CLK(NULL,	"dpll_iva_m5x2_ck",		&dpll_iva_m5x2_ck),
-	CLK(NULL,	"dpll_mpu_ck",			&dpll_mpu_ck),
-	CLK(NULL,	"dpll_mpu_m2_ck",		&dpll_mpu_m2_ck),
-	CLK(NULL,	"per_hs_clk_div_ck",		&per_hs_clk_div_ck),
-	CLK(NULL,	"per_hsd_byp_clk_mux_ck",	&per_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_per_ck",			&dpll_per_ck),
-	CLK(NULL,	"dpll_per_m2_ck",		&dpll_per_m2_ck),
-	CLK(NULL,	"dpll_per_x2_ck",		&dpll_per_x2_ck),
-	CLK(NULL,	"dpll_per_m2x2_ck",		&dpll_per_m2x2_ck),
-	CLK(NULL,	"dpll_per_m3x2_ck",		&dpll_per_m3x2_ck),
-	CLK(NULL,	"dpll_per_m4x2_ck",		&dpll_per_m4x2_ck),
-	CLK(NULL,	"dpll_per_m5x2_ck",		&dpll_per_m5x2_ck),
-	CLK(NULL,	"dpll_per_m6x2_ck",		&dpll_per_m6x2_ck),
-	CLK(NULL,	"dpll_per_m7x2_ck",		&dpll_per_m7x2_ck),
-	CLK(NULL,	"usb_hs_clk_div_ck",		&usb_hs_clk_div_ck),
-	CLK(NULL,	"dpll_usb_ck",			&dpll_usb_ck),
-	CLK(NULL,	"dpll_usb_clkdcoldo_ck",	&dpll_usb_clkdcoldo_ck),
-	CLK(NULL,	"dpll_usb_m2_ck",		&dpll_usb_m2_ck),
-	CLK(NULL,	"ducati_clk_mux_ck",		&ducati_clk_mux_ck),
-	CLK(NULL,	"func_12m_fclk",		&func_12m_fclk),
-	CLK(NULL,	"func_24m_clk",			&func_24m_clk),
-	CLK(NULL,	"func_24mc_fclk",		&func_24mc_fclk),
-	CLK(NULL,	"func_48m_fclk",		&func_48m_fclk),
-	CLK(NULL,	"func_48mc_fclk",		&func_48mc_fclk),
-	CLK(NULL,	"func_64m_fclk",		&func_64m_fclk),
-	CLK(NULL,	"func_96m_fclk",		&func_96m_fclk),
-	CLK(NULL,	"init_60m_fclk",		&init_60m_fclk),
-	CLK(NULL,	"l3_div_ck",			&l3_div_ck),
-	CLK(NULL,	"l4_div_ck",			&l4_div_ck),
-	CLK(NULL,	"lp_clk_div_ck",		&lp_clk_div_ck),
-	CLK(NULL,	"l4_wkup_clk_mux_ck",		&l4_wkup_clk_mux_ck),
-	CLK("smp_twd",	NULL,				&mpu_periphclk),
-	CLK(NULL,	"ocp_abe_iclk",			&ocp_abe_iclk),
-	CLK(NULL,	"per_abe_24m_fclk",		&per_abe_24m_fclk),
-	CLK(NULL,	"per_abe_nc_fclk",		&per_abe_nc_fclk),
-	CLK(NULL,	"syc_clk_div_ck",		&syc_clk_div_ck),
-	CLK(NULL,	"aes1_fck",			&aes1_fck),
-	CLK(NULL,	"aes2_fck",			&aes2_fck),
-	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck),
-	CLK(NULL,	"func_dmic_abe_gfclk",		&func_dmic_abe_gfclk),
-	CLK(NULL,	"dss_sys_clk",			&dss_sys_clk),
-	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk),
-	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk),
-	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk),
-	CLK(NULL,	"dss_fck",			&dss_fck),
-	CLK("omapdss_dss",	"ick",			&dss_fck),
-	CLK(NULL,	"fdif_fck",			&fdif_fck),
-	CLK(NULL,	"gpio1_dbclk",			&gpio1_dbclk),
-	CLK(NULL,	"gpio2_dbclk",			&gpio2_dbclk),
-	CLK(NULL,	"gpio3_dbclk",			&gpio3_dbclk),
-	CLK(NULL,	"gpio4_dbclk",			&gpio4_dbclk),
-	CLK(NULL,	"gpio5_dbclk",			&gpio5_dbclk),
-	CLK(NULL,	"gpio6_dbclk",			&gpio6_dbclk),
-	CLK(NULL,	"sgx_clk_mux",			&sgx_clk_mux),
-	CLK(NULL,	"hsi_fck",			&hsi_fck),
-	CLK(NULL,	"iss_ctrlclk",			&iss_ctrlclk),
-	CLK(NULL,	"mcasp_sync_mux_ck",		&mcasp_sync_mux_ck),
-	CLK(NULL,	"func_mcasp_abe_gfclk",		&func_mcasp_abe_gfclk),
-	CLK(NULL,	"mcbsp1_sync_mux_ck",		&mcbsp1_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp1_gfclk",		&func_mcbsp1_gfclk),
-	CLK(NULL,	"mcbsp2_sync_mux_ck",		&mcbsp2_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp2_gfclk",		&func_mcbsp2_gfclk),
-	CLK(NULL,	"mcbsp3_sync_mux_ck",		&mcbsp3_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp3_gfclk",		&func_mcbsp3_gfclk),
-	CLK(NULL,	"mcbsp4_sync_mux_ck",		&mcbsp4_sync_mux_ck),
-	CLK(NULL,	"per_mcbsp4_gfclk",		&per_mcbsp4_gfclk),
-	CLK(NULL,	"hsmmc1_fclk",			&hsmmc1_fclk),
-	CLK(NULL,	"hsmmc2_fclk",			&hsmmc2_fclk),
-	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m),
-	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck),
-	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1),
-	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0),
-	CLK(NULL,	"slimbus1_fclk_2",		&slimbus1_fclk_2),
-	CLK(NULL,	"slimbus1_slimbus_clk",		&slimbus1_slimbus_clk),
-	CLK(NULL,	"slimbus2_fclk_1",		&slimbus2_fclk_1),
-	CLK(NULL,	"slimbus2_fclk_0",		&slimbus2_fclk_0),
-	CLK(NULL,	"slimbus2_slimbus_clk",		&slimbus2_slimbus_clk),
-	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck),
-	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck),
-	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck),
-	CLK(NULL,	"dmt1_clk_mux",			&dmt1_clk_mux),
-	CLK(NULL,	"cm2_dm10_mux",			&cm2_dm10_mux),
-	CLK(NULL,	"cm2_dm11_mux",			&cm2_dm11_mux),
-	CLK(NULL,	"cm2_dm2_mux",			&cm2_dm2_mux),
-	CLK(NULL,	"cm2_dm3_mux",			&cm2_dm3_mux),
-	CLK(NULL,	"cm2_dm4_mux",			&cm2_dm4_mux),
-	CLK(NULL,	"timer5_sync_mux",		&timer5_sync_mux),
-	CLK(NULL,	"timer6_sync_mux",		&timer6_sync_mux),
-	CLK(NULL,	"timer7_sync_mux",		&timer7_sync_mux),
-	CLK(NULL,	"timer8_sync_mux",		&timer8_sync_mux),
-	CLK(NULL,	"cm2_dm9_mux",			&cm2_dm9_mux),
-	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck),
-	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck),
-	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk),
-	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk),
-	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk),
-	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&usb_host_hs_utmi_p2_clk),
-	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk),
-	CLK(NULL,	"usb_host_hs_hsic480m_p1_clk",	&usb_host_hs_hsic480m_p1_clk),
-	CLK(NULL,	"usb_host_hs_hsic60m_p1_clk",	&usb_host_hs_hsic60m_p1_clk),
-	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk),
-	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk),
-	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk),
-	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck),
-	CLK("usbhs_omap",	"hs_fck",		&usb_host_hs_fck),
-	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk),
-	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk),
-	CLK(NULL,	"usb_otg_hs_ick",		&usb_otg_hs_ick),
-	CLK("musb-omap2430",	"ick",			&usb_otg_hs_ick),
-	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k),
-	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk),
-	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk),
-	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk),
-	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick),
-	CLK("usbhs_omap",	"usbtll_ick",		&usb_tll_hs_ick),
-	CLK("usbhs_tll",	"usbtll_ick",		&usb_tll_hs_ick),
-	CLK(NULL,	"usim_ck",			&usim_ck),
-	CLK(NULL,	"usim_fclk",			&usim_fclk),
-	CLK(NULL,	"pmd_stm_clock_mux_ck",		&pmd_stm_clock_mux_ck),
-	CLK(NULL,	"pmd_trace_clk_mux_ck",		&pmd_trace_clk_mux_ck),
-	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck),
-	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck),
-	CLK(NULL,	"auxclk0_src_ck",		&auxclk0_src_ck),
-	CLK(NULL,	"auxclk0_ck",			&auxclk0_ck),
-	CLK(NULL,	"auxclkreq0_ck",		&auxclkreq0_ck),
-	CLK(NULL,	"auxclk1_src_ck",		&auxclk1_src_ck),
-	CLK(NULL,	"auxclk1_ck",			&auxclk1_ck),
-	CLK(NULL,	"auxclkreq1_ck",		&auxclkreq1_ck),
-	CLK(NULL,	"auxclk2_src_ck",		&auxclk2_src_ck),
-	CLK(NULL,	"auxclk2_ck",			&auxclk2_ck),
-	CLK(NULL,	"auxclkreq2_ck",		&auxclkreq2_ck),
-	CLK(NULL,	"auxclk3_src_ck",		&auxclk3_src_ck),
-	CLK(NULL,	"auxclk3_ck",			&auxclk3_ck),
-	CLK(NULL,	"auxclkreq3_ck",		&auxclkreq3_ck),
-	CLK(NULL,	"auxclk4_src_ck",		&auxclk4_src_ck),
-	CLK(NULL,	"auxclk4_ck",			&auxclk4_ck),
-	CLK(NULL,	"auxclkreq4_ck",		&auxclkreq4_ck),
-	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck),
-	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck),
-	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck),
-	CLK("50000000.gpmc",	"fck",			&dummy_ck),
-	CLK("omap_i2c.1",	"ick",			&dummy_ck),
-	CLK("omap_i2c.2",	"ick",			&dummy_ck),
-	CLK("omap_i2c.3",	"ick",			&dummy_ck),
-	CLK("omap_i2c.4",	"ick",			&dummy_ck),
-	CLK(NULL,	"mailboxes_ick",		&dummy_ck),
-	CLK("omap_hsmmc.0",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.1",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.2",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.3",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.4",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.1",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.2",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.3",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.4",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.1",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.2",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.3",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.4",	"ick",			&dummy_ck),
-	CLK(NULL,	"uart1_ick",			&dummy_ck),
-	CLK(NULL,	"uart2_ick",			&dummy_ck),
-	CLK(NULL,	"uart3_ick",			&dummy_ck),
-	CLK(NULL,	"uart4_ick",			&dummy_ck),
-	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck),
-	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck),
-	CLK("usbhs_tll",	"usbtll_fck",		&dummy_ck),
-	CLK("omap_wdt",	"ick",				&dummy_ck),
-	CLK(NULL,	"timer_32k_ck",	&sys_32k_ck),
-	/* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
-	CLK("omap_timer.1",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.2",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.3",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.4",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.9",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.10",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.11",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.5",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.6",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.7",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.8",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4a318000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48032000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48034000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48036000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("40138000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013a000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013c000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013e000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck),
-};
-
-int __init omap4xxx_clk_init(void)
-{
-	int rc;
-
-	if (cpu_is_omap443x()) {
-		cpu_mask = RATE_IN_4430;
-		omap_clocks_register(omap443x_clks, ARRAY_SIZE(omap443x_clks));
-	} else if (cpu_is_omap446x() || cpu_is_omap447x()) {
-		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
-		omap_clocks_register(omap446x_clks, ARRAY_SIZE(omap446x_clks));
-		if (cpu_is_omap447x())
-			pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
-	} else {
-		return 0;
-	}
-
-	omap_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks));
-
-	omap2_clk_disable_autoidle_all();
-
-	/*
-	 * A set rate of ABE DPLL inturn triggers a set rate of USB DPLL
-	 * when its in bypass. So always lock USB before ABE DPLL.
-	 */
-	/*
-	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
-	 * domain can transition to retention state when not in use.
-	 */
-	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure USB DPLL!\n", __func__);
-
-	/*
-	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
-	 * state when turning the ABE clock domain. Workaround this by
-	 * locking the ABE DPLL on boot.
-	 * Lock the ABE DPLL in any case to avoid issues with audio.
-	 */
-	rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-	if (!rc)
-		rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7a394d7..5854677 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -635,7 +635,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = omap4xxx_clk_init;
+	omap_clk_soc_init = omap4xxx_dt_clk_init;
 }
 
 void __init omap4430_init_late(void)
-- 
1.7.9.5

[PATCHv10 37/41] ARM: OMAP4: remove old clock data and link in new clock init code

[Tero Kristo]

OMAP4 clocks have now been moved to DT, thus remove the old data file
and use the new init code under drivers/clk/omap/clk-44xx.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile          |    2 +-
 arch/arm/mach-omap2/cclock44xx_data.c | 1735 ---------------------------------
 arch/arm/mach-omap2/io.c              |    2 +-
 3 files changed, 2 insertions(+), 1737 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/cclock44xx_data.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1f25f3e..e81cb52ac 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o cclock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) cclock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
 obj-$(CONFIG_SOC_AM33XX)		+= cclock33xx_data.o
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
deleted file mode 100644
index ec0dc0b..0000000
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ /dev/null
@@ -1,1735 +0,0 @@
-/*
- * OMAP4 Clock data
- *
- * Copyright (C) 2009-2012 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul at pwsan.com)
- * Rajendra Nayak (rnayak at ti.com)
- * Benoit Cousson (b-cousson at ti.com)
- * Mike Turquette (mturquette at ti.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX Some of the ES1 clocks have been removed/changed; once support
- * is added for discriminating clocks by ES level, these should be added back
- * in.
- *
- * XXX All of the remaining MODULEMODE clock nodes should be removed
- * once the drivers are updated to use pm_runtime or to use the appropriate
- * upstream clock node for rate/parent selection.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk-private.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock44xx.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "cm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "control.h"
-#include "scrm44xx.h"
-
-/* OMAP4 modulemode control */
-#define OMAP4430_MODULEMODE_HWCTRL_SHIFT		0
-#define OMAP4430_MODULEMODE_SWCTRL_SHIFT		1
-
-/*
- * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
- * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
- * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
- * half of this value.
- */
-#define OMAP4_DPLL_ABE_DEFFREQ				98304000
-
-/*
- * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
- * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
- * locked frequency for the USB DPLL is 960MHz.
- */
-#define OMAP4_DPLL_USB_DEFFREQ				960000000
-
-/* Root clocks */
-
-DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(pad_clks_src_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_GATE(pad_clks_ck, "pad_clks_src_ck", &pad_clks_src_ck, 0x0,
-		OMAP4430_CM_CLKSEL_ABE, OMAP4430_PAD_CLKS_GATE_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_FIXED_RATE(pad_slimbus_core_clks_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(secure_32k_clk_src_ck, CLK_IS_ROOT, 32768, 0x0);
-
-DEFINE_CLK_FIXED_RATE(slimbus_src_clk, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_GATE(slimbus_clk, "slimbus_src_clk", &slimbus_src_clk, 0x0,
-		OMAP4430_CM_CLKSEL_ABE, OMAP4430_SLIMBUS_CLK_GATE_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_FIXED_RATE(sys_32k_ck, CLK_IS_ROOT, 32768, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_12000000_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_13000000_ck, CLK_IS_ROOT, 13000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_16800000_ck, CLK_IS_ROOT, 16800000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_27000000_ck, CLK_IS_ROOT, 27000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_38400000_ck, CLK_IS_ROOT, 38400000, 0x0);
-
-static const char *sys_clkin_ck_parents[] = {
-	"virt_12000000_ck", "virt_13000000_ck", "virt_16800000_ck",
-	"virt_19200000_ck", "virt_26000000_ck", "virt_27000000_ck",
-	"virt_38400000_ck",
-};
-
-DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_SYS_CLKSEL, OMAP4430_SYS_CLKSEL_SHIFT,
-	       OMAP4430_SYS_CLKSEL_WIDTH, CLK_MUX_INDEX_ONE, NULL);
-
-DEFINE_CLK_FIXED_RATE(tie_low_clock_ck, CLK_IS_ROOT, 0, 0x0);
-
-DEFINE_CLK_FIXED_RATE(utmi_phy_clkout_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60mhsp1_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60mhsp2_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60motg_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-/* Module clocks and DPLL outputs */
-
-static const char *abe_dpll_bypass_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "sys_32k_ck",
-};
-
-DEFINE_CLK_MUX(abe_dpll_bypass_clk_mux_ck, abe_dpll_bypass_clk_mux_ck_parents,
-	       NULL, 0x0, OMAP4430_CM_L4_WKUP_CLKSEL, OMAP4430_CLKSEL_SHIFT,
-	       OMAP4430_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(abe_dpll_refclk_mux_ck, abe_dpll_bypass_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_ABE_PLL_REF_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-/* DPLL_ABE */
-static struct dpll_data dpll_abe_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_ABE,
-	.clk_bypass	= &abe_dpll_bypass_clk_mux_ck,
-	.clk_ref	= &abe_dpll_refclk_mux_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_ABE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_ABE,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_ABE,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.m4xen_mask	= OMAP4430_DPLL_REGM4XEN_MASK,
-	.lpmode_mask	= OMAP4430_DPLL_LPMODE_EN_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static const char *dpll_abe_ck_parents[] = {
-	"abe_dpll_refclk_mux_ck",
-};
-
-static struct clk dpll_abe_ck;
-
-static const struct clk_ops dpll_abe_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap4_dpll_regm4xen_recalc,
-	.round_rate	= &omap4_dpll_regm4xen_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_abe_ck_hw = {
-	.hw = {
-		.clk = &dpll_abe_ck,
-	},
-	.dpll_data	= &dpll_abe_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_abe_ck, dpll_abe_ck_parents, dpll_abe_ck_ops);
-
-static const char *dpll_abe_x2_ck_parents[] = {
-	"dpll_abe_ck",
-};
-
-static struct clk dpll_abe_x2_ck;
-
-static const struct clk_ops dpll_abe_x2_ck_ops = {
-	.recalc_rate	= &omap3_clkoutx2_recalc,
-};
-
-static struct clk_hw_omap dpll_abe_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_abe_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_abe_x2_ck, dpll_abe_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-static const struct clk_ops omap_hsdivider_ops = {
-	.set_rate	= &omap2_clksel_set_rate,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-};
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_abe_m2x2_ck, "dpll_abe_x2_ck", &dpll_abe_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M2_DPLL_ABE,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(abe_24m_fclk, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck,
-			0x0, 1, 8);
-
-DEFINE_CLK_DIVIDER(abe_clk, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_ABE, OMAP4430_CLKSEL_OPP_SHIFT,
-		   OMAP4430_CLKSEL_OPP_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_DIVIDER(aess_fclk, "abe_clk", &abe_clk, 0x0,
-		   OMAP4430_CM1_ABE_AESS_CLKCTRL,
-		   OMAP4430_CLKSEL_AESS_FCLK_SHIFT,
-		   OMAP4430_CLKSEL_AESS_FCLK_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_abe_m3x2_ck, "dpll_abe_x2_ck", &dpll_abe_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M3_DPLL_ABE,
-			  OMAP4430_DPLL_CLKOUTHIF_DIV_MASK);
-
-static const char *core_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "dpll_abe_m3x2_ck",
-};
-
-DEFINE_CLK_MUX(core_hsd_byp_clk_mux_ck, core_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_CORE,
-	       OMAP4430_DPLL_BYP_CLKSEL_SHIFT, OMAP4430_DPLL_BYP_CLKSEL_WIDTH,
-	       0x0, NULL);
-
-/* DPLL_CORE */
-static struct dpll_data dpll_core_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
-	.clk_bypass	= &core_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_CORE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_CORE,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_CORE,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static const char *dpll_core_ck_parents[] = {
-	"sys_clkin_ck", "core_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_core_ck;
-
-static const struct clk_ops dpll_core_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_core_ck_hw = {
-	.hw = {
-		.clk = &dpll_core_ck,
-	},
-	.dpll_data	= &dpll_core_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops);
-
-static const char *dpll_core_x2_ck_parents[] = {
-	"dpll_core_ck",
-};
-
-static struct clk dpll_core_x2_ck;
-
-static struct clk_hw_omap dpll_core_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_core_x2_ck,
-	},
-};
-
-DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m6x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M6_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m2_ck, "dpll_core_ck", &dpll_core_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_CORE,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(ddrphy_ck, "dpll_core_m2_ck", &dpll_core_m2_ck, 0x0, 1,
-			2);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m5x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M5_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT,
-		   OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
-		   0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT,
-		   OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
-		   0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT,
-		   OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m4x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M4_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(dll_clk_div_ck, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck,
-			0x0, 1, 2);
-
-DEFINE_CLK_DIVIDER(dpll_abe_m2_ck, "dpll_abe_ck", &dpll_abe_ck, 0x0,
-		   OMAP4430_CM_DIV_M2_DPLL_ABE, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
-		   OMAP4430_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-static const struct clk_ops dpll_hsd_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static const struct clk_ops func_dmic_abe_gfclk_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-};
-
-static const char *dpll_core_m3x2_ck_parents[] = {
-	"dpll_core_x2_ck",
-};
-
-static const struct clksel dpll_core_m3x2_div[] = {
-	{ .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-/* XXX Missing round_rate, set_rate in ops */
-DEFINE_CLK_OMAP_MUX_GATE(dpll_core_m3x2_ck, NULL, dpll_core_m3x2_div,
-			 OMAP4430_CM_DIV_M3_DPLL_CORE,
-			 OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-			 OMAP4430_CM_DIV_M3_DPLL_CORE,
-			 OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL,
-			 dpll_core_m3x2_ck_parents, dpll_hsd_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m7x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M7_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK);
-
-static const char *iva_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "div_iva_hs_clk",
-};
-
-DEFINE_CLK_MUX(iva_hsd_byp_clk_mux_ck, iva_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_IVA, OMAP4430_DPLL_BYP_CLKSEL_SHIFT,
-	       OMAP4430_DPLL_BYP_CLKSEL_WIDTH, 0x0, NULL);
-
-/* DPLL_IVA */
-static struct dpll_data dpll_iva_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
-	.clk_bypass	= &iva_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_IVA,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_IVA,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_IVA,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_iva_ck_parents[] = {
-	"sys_clkin_ck", "iva_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_iva_ck;
-
-static const struct clk_ops dpll_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_iva_ck_hw = {
-	.hw = {
-		.clk = &dpll_iva_ck,
-	},
-	.dpll_data	= &dpll_iva_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops);
-
-static const char *dpll_iva_x2_ck_parents[] = {
-	"dpll_iva_ck",
-};
-
-static struct clk dpll_iva_x2_ck;
-
-static struct clk_hw_omap dpll_iva_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_iva_x2_ck,
-	},
-};
-
-DEFINE_STRUCT_CLK(dpll_iva_x2_ck, dpll_iva_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_iva_m4x2_ck, "dpll_iva_x2_ck", &dpll_iva_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M4_DPLL_IVA,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_iva_m5x2_ck, "dpll_iva_x2_ck", &dpll_iva_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M5_DPLL_IVA,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-/* DPLL_MPU */
-static struct dpll_data dpll_mpu_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_MPU,
-	.clk_bypass	= &div_mpu_hs_clk,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_MPU,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_MPU,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_MPU,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_mpu_ck_parents[] = {
-	"sys_clkin_ck", "div_mpu_hs_clk"
-};
-
-static struct clk dpll_mpu_ck;
-
-static struct clk_hw_omap dpll_mpu_ck_hw = {
-	.hw = {
-		.clk = &dpll_mpu_ck,
-	},
-	.dpll_data	= &dpll_mpu_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops);
-
-DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_MPU,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(per_hs_clk_div_ck, "dpll_abe_m3x2_ck",
-			&dpll_abe_m3x2_ck, 0x0, 1, 2);
-
-static const char *per_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "per_hs_clk_div_ck",
-};
-
-DEFINE_CLK_MUX(per_hsd_byp_clk_mux_ck, per_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_PER, OMAP4430_DPLL_BYP_CLKSEL_SHIFT,
-	       OMAP4430_DPLL_BYP_CLKSEL_WIDTH, 0x0, NULL);
-
-/* DPLL_PER */
-static struct dpll_data dpll_per_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
-	.clk_bypass	= &per_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_PER,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_PER,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_PER,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_per_ck_parents[] = {
-	"sys_clkin_ck", "per_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_per_ck;
-
-static struct clk_hw_omap dpll_per_ck_hw = {
-	.hw = {
-		.clk = &dpll_per_ck,
-	},
-	.dpll_data	= &dpll_per_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops);
-
-DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		   OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
-		   OMAP4430_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-static const char *dpll_per_x2_ck_parents[] = {
-	"dpll_per_ck",
-};
-
-static struct clk dpll_per_x2_ck;
-
-static struct clk_hw_omap dpll_per_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_per_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_x2_ck, dpll_per_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m2x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M2_DPLL_PER,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-static const char *dpll_per_m3x2_ck_parents[] = {
-	"dpll_per_x2_ck",
-};
-
-static const struct clksel dpll_per_m3x2_div[] = {
-	{ .parent = &dpll_per_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-/* XXX Missing round_rate, set_rate in ops */
-DEFINE_CLK_OMAP_MUX_GATE(dpll_per_m3x2_ck, NULL, dpll_per_m3x2_div,
-			 OMAP4430_CM_DIV_M3_DPLL_PER,
-			 OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-			 OMAP4430_CM_DIV_M3_DPLL_PER,
-			 OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL,
-			 dpll_per_m3x2_ck_parents, dpll_hsd_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m4x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M4_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m5x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M5_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m6x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M6_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m7x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M7_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(usb_hs_clk_div_ck, "dpll_abe_m3x2_ck",
-			&dpll_abe_m3x2_ck, 0x0, 1, 3);
-
-/* DPLL_USB */
-static struct dpll_data dpll_usb_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_USB,
-	.clk_bypass	= &usb_hs_clk_div_ck,
-	.flags		= DPLL_J_TYPE,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_USB,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_USB,
-	.mult_mask	= OMAP4430_DPLL_MULT_USB_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_0_7_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.sddiv_mask	= OMAP4430_DPLL_SD_DIV_MASK,
-	.max_multiplier	= 4095,
-	.max_divider	= 256,
-	.min_divider	= 1,
-};
-
-static const char *dpll_usb_ck_parents[] = {
-	"sys_clkin_ck", "usb_hs_clk_div_ck"
-};
-
-static struct clk dpll_usb_ck;
-
-static const struct clk_ops dpll_usb_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap dpll_usb_ck_hw = {
-	.hw = {
-		.clk = &dpll_usb_ck,
-	},
-	.dpll_data	= &dpll_usb_dd,
-	.clkdm_name	= "l3_init_clkdm",
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_usb_ck_ops);
-
-static const char *dpll_usb_clkdcoldo_ck_parents[] = {
-	"dpll_usb_ck",
-};
-
-static struct clk dpll_usb_clkdcoldo_ck;
-
-static const struct clk_ops dpll_usb_clkdcoldo_ck_ops = {
-};
-
-static struct clk_hw_omap dpll_usb_clkdcoldo_ck_hw = {
-	.hw = {
-		.clk = &dpll_usb_clkdcoldo_ck,
-	},
-	.clksel_reg	= OMAP4430_CM_CLKDCOLDO_DPLL_USB,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_usb_clkdcoldo_ck, dpll_usb_clkdcoldo_ck_parents,
-		  dpll_usb_clkdcoldo_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_usb_m2_ck, "dpll_usb_ck", &dpll_usb_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_USB,
-			  OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK);
-
-static const char *ducati_clk_mux_ck_parents[] = {
-	"div_core_ck", "dpll_per_m6x2_ck",
-};
-
-DEFINE_CLK_MUX(ducati_clk_mux_ck, ducati_clk_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(func_12m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 16);
-
-DEFINE_CLK_FIXED_FACTOR(func_24m_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0,
-			1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(func_24mc_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 8);
-
-static const struct clk_div_table func_48m_fclk_rates[] = {
-	{ .div = 4, .val = 0 },
-	{ .div = 8, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_48m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_48m_fclk_rates,
-			 NULL);
-
-DEFINE_CLK_FIXED_FACTOR(func_48mc_fclk,	"dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 4);
-
-static const struct clk_div_table func_64m_fclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 4, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_64m_fclk, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_64m_fclk_rates,
-			 NULL);
-
-static const struct clk_div_table func_96m_fclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 4, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_96m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_96m_fclk_rates,
-			 NULL);
-
-static const struct clk_div_table init_60m_fclk_rates[] = {
-	{ .div = 1, .val = 0 },
-	{ .div = 8, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(init_60m_fclk, "dpll_usb_m2_ck", &dpll_usb_m2_ck,
-			 0x0, OMAP4430_CM_CLKSEL_USB_60MHZ,
-			 OMAP4430_CLKSEL_0_0_SHIFT, OMAP4430_CLKSEL_0_0_WIDTH,
-			 0x0, init_60m_fclk_rates, NULL);
-
-DEFINE_CLK_DIVIDER(l3_div_ck, "div_core_ck", &div_core_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_L3_SHIFT,
-		   OMAP4430_CLKSEL_L3_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(l4_div_ck, "l3_div_ck", &l3_div_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_L4_SHIFT,
-		   OMAP4430_CLKSEL_L4_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(lp_clk_div_ck, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck,
-			0x0, 1, 16);
-
-static const char *l4_wkup_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "lp_clk_div_ck",
-};
-
-DEFINE_CLK_MUX(l4_wkup_clk_mux_ck, l4_wkup_clk_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_L4_WKUP_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-static const struct clk_div_table ocp_abe_iclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 1, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(ocp_abe_iclk, "aess_fclk", &aess_fclk, 0x0,
-			 OMAP4430_CM1_ABE_AESS_CLKCTRL,
-			 OMAP4430_CLKSEL_AESS_FCLK_SHIFT,
-			 OMAP4430_CLKSEL_AESS_FCLK_WIDTH,
-			 0x0, ocp_abe_iclk_rates, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(per_abe_24m_fclk, "dpll_abe_m2_ck", &dpll_abe_m2_ck,
-			0x0, 1, 4);
-
-DEFINE_CLK_DIVIDER(per_abe_nc_fclk, "dpll_abe_m2_ck", &dpll_abe_m2_ck, 0x0,
-		   OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-		   OMAP4430_SCALE_FCLK_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
-		   OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-		   OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-static const char *dbgclk_mux_ck_parents[] = {
-	"sys_clkin_ck"
-};
-
-static struct clk dbgclk_mux_ck;
-DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL);
-DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents,
-		  dpll_usb_clkdcoldo_ck_ops);
-
-/* Leaf clocks controlled by modules */
-
-DEFINE_CLK_GATE(aes1_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_AES1_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(aes2_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_AES2_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(bandgap_fclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-		OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT, 0x0, NULL);
-
-static const struct clk_div_table div_ts_ck_rates[] = {
-	{ .div = 8, .val = 0 },
-	{ .div = 16, .val = 1 },
-	{ .div = 32, .val = 2 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(div_ts_ck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-			 0x0, OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-			 OMAP4430_CLKSEL_24_25_SHIFT,
-			 OMAP4430_CLKSEL_24_25_WIDTH, 0x0, div_ts_ck_rates,
-			 NULL);
-
-DEFINE_CLK_GATE(bandgap_ts_fclk, "div_ts_ck", &div_ts_ck, 0x0,
-		OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-		OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT,
-		0x0, NULL);
-
-static const char *dmic_sync_mux_ck_parents[] = {
-	"abe_24m_fclk", "syc_clk_div_ck", "func_24m_clk",
-};
-
-DEFINE_CLK_MUX(dmic_sync_mux_ck, dmic_sync_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM1_ABE_DMIC_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_dmic_abe_gfclk_sel[] = {
-	{ .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_dmic_abe_gfclk_parents[] = {
-	"dmic_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_dmic_abe_gfclk, "abe_clkdm", func_dmic_abe_gfclk_sel,
-		    OMAP4430_CM1_ABE_DMIC_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK,
-		    func_dmic_abe_gfclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_GATE(dss_sys_clk, "syc_clk_div_ck", &syc_clk_div_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dss_tv_clk, "extalt_clkin_ck", &extalt_clkin_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck,
-		CLK_SET_RATE_PARENT,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(dss_48mhz_clk, "func_48mc_fclk", &func_48mc_fclk, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(dss_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_DIVIDER(fdif_fck, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, 0x0,
-		   OMAP4430_CM_CAM_FDIF_CLKCTRL, OMAP4430_CLKSEL_FCLK_SHIFT,
-		   OMAP4430_CLKSEL_FCLK_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_GATE(gpio1_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
-		OMAP4430_OPTFCLKEN_DBCLK_SHIFT,	0x0, NULL);
-
-DEFINE_CLK_GATE(gpio2_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO2_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio3_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
-		OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio4_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO4_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio5_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO5_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio6_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO6_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-static const struct clksel sgx_clk_mux_sel[] = {
-	{ .parent = &dpll_core_m7x2_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m7x2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *sgx_clk_mux_parents[] = {
-	"dpll_core_m7x2_ck", "dpll_per_m7x2_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(sgx_clk_mux, "l3_gfx_clkdm", sgx_clk_mux_sel,
-		    OMAP4430_CM_GFX_GFX_CLKCTRL, OMAP4430_CLKSEL_SGX_FCLK_MASK,
-		    sgx_clk_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_DIVIDER(hsi_fck, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, 0x0,
-		   OMAP4430_CM_L3INIT_HSI_CLKCTRL, OMAP4430_CLKSEL_24_25_SHIFT,
-		   OMAP4430_CLKSEL_24_25_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-DEFINE_CLK_GATE(iss_ctrlclk, "func_96m_fclk", &func_96m_fclk, 0x0,
-		OMAP4430_CM_CAM_ISS_CLKCTRL, OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_MUX(mcasp_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCASP_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcasp_abe_gfclk_sel[] = {
-	{ .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcasp_abe_gfclk_parents[] = {
-	"mcasp_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcasp_abe_gfclk, "abe_clkdm", func_mcasp_abe_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCASP_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK,
-		    func_mcasp_abe_gfclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp1_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp1_gfclk_sel[] = {
-	{ .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp1_gfclk_parents[] = {
-	"mcbsp1_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp1_gfclk, "abe_clkdm", func_mcbsp1_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp1_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp2_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp2_gfclk_sel[] = {
-	{ .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp2_gfclk_parents[] = {
-	"mcbsp2_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp2_gfclk, "abe_clkdm", func_mcbsp2_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp2_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp3_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp3_gfclk_sel[] = {
-	{ .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp3_gfclk_parents[] = {
-	"mcbsp3_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp3_gfclk, "abe_clkdm", func_mcbsp3_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp3_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const char *mcbsp4_sync_mux_ck_parents[] = {
-	"func_96m_fclk", "per_abe_nc_fclk",
-};
-
-DEFINE_CLK_MUX(mcbsp4_sync_mux_ck, mcbsp4_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel per_mcbsp4_gfclk_sel[] = {
-	{ .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *per_mcbsp4_gfclk_parents[] = {
-	"mcbsp4_sync_mux_ck", "pad_clks_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(per_mcbsp4_gfclk, "l4_per_clkdm", per_mcbsp4_gfclk_sel,
-		    OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_24_24_MASK, per_mcbsp4_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const struct clksel hsmmc1_fclk_sel[] = {
-	{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
-	{ .parent = &func_96m_fclk, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *hsmmc1_fclk_parents[] = {
-	"func_64m_fclk", "func_96m_fclk",
-};
-
-DEFINE_CLK_OMAP_MUX(hsmmc1_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
-		    OMAP4430_CM_L3INIT_MMC1_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
-		    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_1, "func_24m_clk", &func_24m_clk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK1_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_0, "abe_24m_fclk", &abe_24m_fclk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK0_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_2, "pad_clks_ck", &pad_clks_ck, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK2_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_slimbus_clk, "slimbus_clk", &slimbus_clk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_fclk_1, "per_abe_24m_fclk", &per_abe_24m_fclk, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_fclk_0, "func_24mc_fclk", &func_24mc_fclk, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_slimbus_clk, "pad_slimbus_core_clks_ck",
-		&pad_slimbus_core_clks_ck, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_core_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_iva_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_mpu_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-static const struct clksel dmt1_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-DEFINE_CLK_OMAP_MUX(dmt1_clk_mux, "l4_wkup_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_WKUP_TIMER1_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm10_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm11_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm2_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm3_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm4_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const struct clksel timer5_sync_mux_sel[] = {
-	{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer5_sync_mux_parents[] = {
-	"syc_clk_div_ck", "sys_32k_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(timer5_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER5_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer6_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER6_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer7_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER7_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer8_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER8_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm9_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static struct clk usb_host_fs_fck;
-
-static const char *usb_host_fs_fck_parent_names[] = {
-	"func_48mc_fclk",
-};
-
-static const struct clk_ops usb_host_fs_fck_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-};
-
-static struct clk_hw_omap usb_host_fs_fck_hw = {
-	.hw = {
-		.clk = &usb_host_fs_fck,
-	},
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-};
-
-DEFINE_STRUCT_CLK(usb_host_fs_fck, usb_host_fs_fck_parent_names,
-		  usb_host_fs_fck_ops);
-
-static const char *utmi_p1_gfclk_parents[] = {
-	"init_60m_fclk", "xclk60mhsp1_ck",
-};
-
-DEFINE_CLK_MUX(utmi_p1_gfclk, utmi_p1_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	       OMAP4430_CLKSEL_UTMI_P1_SHIFT, OMAP4430_CLKSEL_UTMI_P1_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p1_clk, "utmi_p1_gfclk", &utmi_p1_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT, 0x0, NULL);
-
-static const char *utmi_p2_gfclk_parents[] = {
-	"init_60m_fclk", "xclk60mhsp2_ck",
-};
-
-DEFINE_CLK_MUX(utmi_p2_gfclk, utmi_p2_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	       OMAP4430_CLKSEL_UTMI_P2_SHIFT, OMAP4430_CLKSEL_UTMI_P2_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p2_clk, "utmi_p2_gfclk", &utmi_p2_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p3_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic480m_p1_clk, "dpll_usb_m2_ck",
-		&dpll_usb_m2_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic60m_p1_clk, "init_60m_fclk",
-		&init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic60m_p2_clk, "init_60m_fclk",
-		&init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic480m_p2_clk, "dpll_usb_m2_ck",
-		&dpll_usb_m2_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_func48mclk, "func_48mc_fclk", &func_48mc_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_fck, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-static const char *otg_60m_gfclk_parents[] = {
-	"utmi_phy_clkout_ck", "xclk60motg_ck",
-};
-
-DEFINE_CLK_MUX(otg_60m_gfclk, otg_60m_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, OMAP4430_CLKSEL_60M_SHIFT,
-	       OMAP4430_CLKSEL_60M_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_otg_hs_xclk, "otg_60m_gfclk", &otg_60m_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-		OMAP4430_OPTFCLKEN_XCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_otg_hs_ick, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-		OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_phy_cm_clk32k, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_ALWON_USBPHY_CLKCTRL,
-		OMAP4430_OPTFCLKEN_CLK32K_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch2_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch0_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch1_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_ick, "l4_div_ck", &l4_div_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
-
-static const struct clk_div_table usim_ck_rates[] = {
-	{ .div = 14, .val = 0 },
-	{ .div = 18, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(usim_ck, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, 0x0,
-			 OMAP4430_CM_WKUP_USIM_CLKCTRL,
-			 OMAP4430_CLKSEL_DIV_SHIFT, OMAP4430_CLKSEL_DIV_WIDTH,
-			 0x0, usim_ck_rates, NULL);
-
-DEFINE_CLK_GATE(usim_fclk, "usim_ck", &usim_ck, 0x0,
-		OMAP4430_CM_WKUP_USIM_CLKCTRL, OMAP4430_OPTFCLKEN_FCLK_SHIFT,
-		0x0, NULL);
-
-/* Remaining optional clocks */
-static const char *pmd_stm_clock_mux_ck_parents[] = {
-	"sys_clkin_ck", "dpll_core_m6x2_ck", "tie_low_clock_ck",
-};
-
-DEFINE_CLK_MUX(pmd_stm_clock_mux_ck, pmd_stm_clock_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, OMAP4430_PMD_STM_MUX_CTRL_SHIFT,
-	       OMAP4430_PMD_STM_MUX_CTRL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(pmd_trace_clk_mux_ck, pmd_stm_clock_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	       OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT,
-	       OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(stm_clk_div_ck, "pmd_stm_clock_mux_ck",
-		   &pmd_stm_clock_mux_ck, 0x0, OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-		   OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT,
-		   OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-static const char *trace_clk_div_ck_parents[] = {
-	"pmd_trace_clk_mux_ck",
-};
-
-static const struct clksel trace_clk_div_div[] = {
-	{ .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk trace_clk_div_ck;
-
-static const struct clk_ops trace_clk_div_ck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-	.init		= &omap2_init_clk_clkdm,
-	.enable		= &omap2_clkops_enable_clkdm,
-	.disable	= &omap2_clkops_disable_clkdm,
-};
-
-static struct clk_hw_omap trace_clk_div_ck_hw = {
-	.hw = {
-		.clk = &trace_clk_div_ck,
-	},
-	.clkdm_name	= "emu_sys_clkdm",
-	.clksel		= trace_clk_div_div,
-	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
-};
-
-DEFINE_STRUCT_CLK(trace_clk_div_ck, trace_clk_div_ck_parents,
-		  trace_clk_div_ck_ops);
-
-/* SCRM aux clk nodes */
-
-static const struct clksel auxclk_src_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m3x2_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m3x2_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *auxclk_src_ck_parents[] = {
-	"sys_clkin_ck", "dpll_core_m3x2_ck", "dpll_per_m3x2_ck",
-};
-
-static const struct clk_ops auxclk_src_ck_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk0_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK0, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK0, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk0_ck, "auxclk0_src_ck", &auxclk0_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK0, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk1_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK1, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK1, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk1_ck, "auxclk1_src_ck", &auxclk1_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK1, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk2_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK2, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK2, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk2_ck, "auxclk2_src_ck", &auxclk2_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK2, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk3_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK3, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK3, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk3_ck, "auxclk3_src_ck", &auxclk3_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK3, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk4_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK4, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK4, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk4_ck, "auxclk4_src_ck", &auxclk4_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK4, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk5_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK5, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK5, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk5_ck, "auxclk5_src_ck", &auxclk5_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK5, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-static const char *auxclkreq_ck_parents[] = {
-	"auxclk0_ck", "auxclk1_ck", "auxclk2_ck", "auxclk3_ck", "auxclk4_ck",
-	"auxclk5_ck",
-};
-
-DEFINE_CLK_MUX(auxclkreq0_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ0, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq1_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ1, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq2_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ2, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq3_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ3, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq4_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ4, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq5_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ5, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-/*
- * clocks specific to omap4460
- */
-static struct omap_clk omap446x_clks[] = {
-	CLK(NULL,	"div_ts_ck",			&div_ts_ck),
-	CLK(NULL,	"bandgap_ts_fclk",		&bandgap_ts_fclk),
-};
-
-/*
- * clocks specific to omap4430
- */
-static struct omap_clk omap443x_clks[] = {
-	CLK(NULL,	"bandgap_fclk",			&bandgap_fclk),
-};
-
-/*
- * clocks common to omap44xx
- */
-static struct omap_clk omap44xx_clks[] = {
-	CLK(NULL,	"extalt_clkin_ck",		&extalt_clkin_ck),
-	CLK(NULL,	"pad_clks_src_ck",		&pad_clks_src_ck),
-	CLK(NULL,	"pad_clks_ck",			&pad_clks_ck),
-	CLK(NULL,	"pad_slimbus_core_clks_ck",	&pad_slimbus_core_clks_ck),
-	CLK(NULL,	"secure_32k_clk_src_ck",	&secure_32k_clk_src_ck),
-	CLK(NULL,	"slimbus_src_clk",		&slimbus_src_clk),
-	CLK(NULL,	"slimbus_clk",			&slimbus_clk),
-	CLK(NULL,	"sys_32k_ck",			&sys_32k_ck),
-	CLK(NULL,	"virt_12000000_ck",		&virt_12000000_ck),
-	CLK(NULL,	"virt_13000000_ck",		&virt_13000000_ck),
-	CLK(NULL,	"virt_16800000_ck",		&virt_16800000_ck),
-	CLK(NULL,	"virt_19200000_ck",		&virt_19200000_ck),
-	CLK(NULL,	"virt_26000000_ck",		&virt_26000000_ck),
-	CLK(NULL,	"virt_27000000_ck",		&virt_27000000_ck),
-	CLK(NULL,	"virt_38400000_ck",		&virt_38400000_ck),
-	CLK(NULL,	"sys_clkin_ck",			&sys_clkin_ck),
-	CLK(NULL,	"tie_low_clock_ck",		&tie_low_clock_ck),
-	CLK(NULL,	"utmi_phy_clkout_ck",		&utmi_phy_clkout_ck),
-	CLK(NULL,	"xclk60mhsp1_ck",		&xclk60mhsp1_ck),
-	CLK(NULL,	"xclk60mhsp2_ck",		&xclk60mhsp2_ck),
-	CLK(NULL,	"xclk60motg_ck",		&xclk60motg_ck),
-	CLK(NULL,	"abe_dpll_bypass_clk_mux_ck",	&abe_dpll_bypass_clk_mux_ck),
-	CLK(NULL,	"abe_dpll_refclk_mux_ck",	&abe_dpll_refclk_mux_ck),
-	CLK(NULL,	"dpll_abe_ck",			&dpll_abe_ck),
-	CLK(NULL,	"dpll_abe_x2_ck",		&dpll_abe_x2_ck),
-	CLK(NULL,	"dpll_abe_m2x2_ck",		&dpll_abe_m2x2_ck),
-	CLK(NULL,	"abe_24m_fclk",			&abe_24m_fclk),
-	CLK(NULL,	"abe_clk",			&abe_clk),
-	CLK(NULL,	"aess_fclk",			&aess_fclk),
-	CLK(NULL,	"dpll_abe_m3x2_ck",		&dpll_abe_m3x2_ck),
-	CLK(NULL,	"core_hsd_byp_clk_mux_ck",	&core_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_core_ck",			&dpll_core_ck),
-	CLK(NULL,	"dpll_core_x2_ck",		&dpll_core_x2_ck),
-	CLK(NULL,	"dpll_core_m6x2_ck",		&dpll_core_m6x2_ck),
-	CLK(NULL,	"dbgclk_mux_ck",		&dbgclk_mux_ck),
-	CLK(NULL,	"dpll_core_m2_ck",		&dpll_core_m2_ck),
-	CLK(NULL,	"ddrphy_ck",			&ddrphy_ck),
-	CLK(NULL,	"dpll_core_m5x2_ck",		&dpll_core_m5x2_ck),
-	CLK(NULL,	"div_core_ck",			&div_core_ck),
-	CLK(NULL,	"div_iva_hs_clk",		&div_iva_hs_clk),
-	CLK(NULL,	"div_mpu_hs_clk",		&div_mpu_hs_clk),
-	CLK(NULL,	"dpll_core_m4x2_ck",		&dpll_core_m4x2_ck),
-	CLK(NULL,	"dll_clk_div_ck",		&dll_clk_div_ck),
-	CLK(NULL,	"dpll_abe_m2_ck",		&dpll_abe_m2_ck),
-	CLK(NULL,	"dpll_core_m3x2_ck",		&dpll_core_m3x2_ck),
-	CLK(NULL,	"dpll_core_m7x2_ck",		&dpll_core_m7x2_ck),
-	CLK(NULL,	"iva_hsd_byp_clk_mux_ck",	&iva_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_iva_ck",			&dpll_iva_ck),
-	CLK(NULL,	"dpll_iva_x2_ck",		&dpll_iva_x2_ck),
-	CLK(NULL,	"dpll_iva_m4x2_ck",		&dpll_iva_m4x2_ck),
-	CLK(NULL,	"dpll_iva_m5x2_ck",		&dpll_iva_m5x2_ck),
-	CLK(NULL,	"dpll_mpu_ck",			&dpll_mpu_ck),
-	CLK(NULL,	"dpll_mpu_m2_ck",		&dpll_mpu_m2_ck),
-	CLK(NULL,	"per_hs_clk_div_ck",		&per_hs_clk_div_ck),
-	CLK(NULL,	"per_hsd_byp_clk_mux_ck",	&per_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_per_ck",			&dpll_per_ck),
-	CLK(NULL,	"dpll_per_m2_ck",		&dpll_per_m2_ck),
-	CLK(NULL,	"dpll_per_x2_ck",		&dpll_per_x2_ck),
-	CLK(NULL,	"dpll_per_m2x2_ck",		&dpll_per_m2x2_ck),
-	CLK(NULL,	"dpll_per_m3x2_ck",		&dpll_per_m3x2_ck),
-	CLK(NULL,	"dpll_per_m4x2_ck",		&dpll_per_m4x2_ck),
-	CLK(NULL,	"dpll_per_m5x2_ck",		&dpll_per_m5x2_ck),
-	CLK(NULL,	"dpll_per_m6x2_ck",		&dpll_per_m6x2_ck),
-	CLK(NULL,	"dpll_per_m7x2_ck",		&dpll_per_m7x2_ck),
-	CLK(NULL,	"usb_hs_clk_div_ck",		&usb_hs_clk_div_ck),
-	CLK(NULL,	"dpll_usb_ck",			&dpll_usb_ck),
-	CLK(NULL,	"dpll_usb_clkdcoldo_ck",	&dpll_usb_clkdcoldo_ck),
-	CLK(NULL,	"dpll_usb_m2_ck",		&dpll_usb_m2_ck),
-	CLK(NULL,	"ducati_clk_mux_ck",		&ducati_clk_mux_ck),
-	CLK(NULL,	"func_12m_fclk",		&func_12m_fclk),
-	CLK(NULL,	"func_24m_clk",			&func_24m_clk),
-	CLK(NULL,	"func_24mc_fclk",		&func_24mc_fclk),
-	CLK(NULL,	"func_48m_fclk",		&func_48m_fclk),
-	CLK(NULL,	"func_48mc_fclk",		&func_48mc_fclk),
-	CLK(NULL,	"func_64m_fclk",		&func_64m_fclk),
-	CLK(NULL,	"func_96m_fclk",		&func_96m_fclk),
-	CLK(NULL,	"init_60m_fclk",		&init_60m_fclk),
-	CLK(NULL,	"l3_div_ck",			&l3_div_ck),
-	CLK(NULL,	"l4_div_ck",			&l4_div_ck),
-	CLK(NULL,	"lp_clk_div_ck",		&lp_clk_div_ck),
-	CLK(NULL,	"l4_wkup_clk_mux_ck",		&l4_wkup_clk_mux_ck),
-	CLK("smp_twd",	NULL,				&mpu_periphclk),
-	CLK(NULL,	"ocp_abe_iclk",			&ocp_abe_iclk),
-	CLK(NULL,	"per_abe_24m_fclk",		&per_abe_24m_fclk),
-	CLK(NULL,	"per_abe_nc_fclk",		&per_abe_nc_fclk),
-	CLK(NULL,	"syc_clk_div_ck",		&syc_clk_div_ck),
-	CLK(NULL,	"aes1_fck",			&aes1_fck),
-	CLK(NULL,	"aes2_fck",			&aes2_fck),
-	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck),
-	CLK(NULL,	"func_dmic_abe_gfclk",		&func_dmic_abe_gfclk),
-	CLK(NULL,	"dss_sys_clk",			&dss_sys_clk),
-	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk),
-	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk),
-	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk),
-	CLK(NULL,	"dss_fck",			&dss_fck),
-	CLK("omapdss_dss",	"ick",			&dss_fck),
-	CLK(NULL,	"fdif_fck",			&fdif_fck),
-	CLK(NULL,	"gpio1_dbclk",			&gpio1_dbclk),
-	CLK(NULL,	"gpio2_dbclk",			&gpio2_dbclk),
-	CLK(NULL,	"gpio3_dbclk",			&gpio3_dbclk),
-	CLK(NULL,	"gpio4_dbclk",			&gpio4_dbclk),
-	CLK(NULL,	"gpio5_dbclk",			&gpio5_dbclk),
-	CLK(NULL,	"gpio6_dbclk",			&gpio6_dbclk),
-	CLK(NULL,	"sgx_clk_mux",			&sgx_clk_mux),
-	CLK(NULL,	"hsi_fck",			&hsi_fck),
-	CLK(NULL,	"iss_ctrlclk",			&iss_ctrlclk),
-	CLK(NULL,	"mcasp_sync_mux_ck",		&mcasp_sync_mux_ck),
-	CLK(NULL,	"func_mcasp_abe_gfclk",		&func_mcasp_abe_gfclk),
-	CLK(NULL,	"mcbsp1_sync_mux_ck",		&mcbsp1_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp1_gfclk",		&func_mcbsp1_gfclk),
-	CLK(NULL,	"mcbsp2_sync_mux_ck",		&mcbsp2_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp2_gfclk",		&func_mcbsp2_gfclk),
-	CLK(NULL,	"mcbsp3_sync_mux_ck",		&mcbsp3_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp3_gfclk",		&func_mcbsp3_gfclk),
-	CLK(NULL,	"mcbsp4_sync_mux_ck",		&mcbsp4_sync_mux_ck),
-	CLK(NULL,	"per_mcbsp4_gfclk",		&per_mcbsp4_gfclk),
-	CLK(NULL,	"hsmmc1_fclk",			&hsmmc1_fclk),
-	CLK(NULL,	"hsmmc2_fclk",			&hsmmc2_fclk),
-	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m),
-	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck),
-	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1),
-	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0),
-	CLK(NULL,	"slimbus1_fclk_2",		&slimbus1_fclk_2),
-	CLK(NULL,	"slimbus1_slimbus_clk",		&slimbus1_slimbus_clk),
-	CLK(NULL,	"slimbus2_fclk_1",		&slimbus2_fclk_1),
-	CLK(NULL,	"slimbus2_fclk_0",		&slimbus2_fclk_0),
-	CLK(NULL,	"slimbus2_slimbus_clk",		&slimbus2_slimbus_clk),
-	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck),
-	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck),
-	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck),
-	CLK(NULL,	"dmt1_clk_mux",			&dmt1_clk_mux),
-	CLK(NULL,	"cm2_dm10_mux",			&cm2_dm10_mux),
-	CLK(NULL,	"cm2_dm11_mux",			&cm2_dm11_mux),
-	CLK(NULL,	"cm2_dm2_mux",			&cm2_dm2_mux),
-	CLK(NULL,	"cm2_dm3_mux",			&cm2_dm3_mux),
-	CLK(NULL,	"cm2_dm4_mux",			&cm2_dm4_mux),
-	CLK(NULL,	"timer5_sync_mux",		&timer5_sync_mux),
-	CLK(NULL,	"timer6_sync_mux",		&timer6_sync_mux),
-	CLK(NULL,	"timer7_sync_mux",		&timer7_sync_mux),
-	CLK(NULL,	"timer8_sync_mux",		&timer8_sync_mux),
-	CLK(NULL,	"cm2_dm9_mux",			&cm2_dm9_mux),
-	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck),
-	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck),
-	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk),
-	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk),
-	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk),
-	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&usb_host_hs_utmi_p2_clk),
-	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk),
-	CLK(NULL,	"usb_host_hs_hsic480m_p1_clk",	&usb_host_hs_hsic480m_p1_clk),
-	CLK(NULL,	"usb_host_hs_hsic60m_p1_clk",	&usb_host_hs_hsic60m_p1_clk),
-	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk),
-	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk),
-	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk),
-	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck),
-	CLK("usbhs_omap",	"hs_fck",		&usb_host_hs_fck),
-	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk),
-	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk),
-	CLK(NULL,	"usb_otg_hs_ick",		&usb_otg_hs_ick),
-	CLK("musb-omap2430",	"ick",			&usb_otg_hs_ick),
-	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k),
-	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk),
-	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk),
-	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk),
-	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick),
-	CLK("usbhs_omap",	"usbtll_ick",		&usb_tll_hs_ick),
-	CLK("usbhs_tll",	"usbtll_ick",		&usb_tll_hs_ick),
-	CLK(NULL,	"usim_ck",			&usim_ck),
-	CLK(NULL,	"usim_fclk",			&usim_fclk),
-	CLK(NULL,	"pmd_stm_clock_mux_ck",		&pmd_stm_clock_mux_ck),
-	CLK(NULL,	"pmd_trace_clk_mux_ck",		&pmd_trace_clk_mux_ck),
-	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck),
-	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck),
-	CLK(NULL,	"auxclk0_src_ck",		&auxclk0_src_ck),
-	CLK(NULL,	"auxclk0_ck",			&auxclk0_ck),
-	CLK(NULL,	"auxclkreq0_ck",		&auxclkreq0_ck),
-	CLK(NULL,	"auxclk1_src_ck",		&auxclk1_src_ck),
-	CLK(NULL,	"auxclk1_ck",			&auxclk1_ck),
-	CLK(NULL,	"auxclkreq1_ck",		&auxclkreq1_ck),
-	CLK(NULL,	"auxclk2_src_ck",		&auxclk2_src_ck),
-	CLK(NULL,	"auxclk2_ck",			&auxclk2_ck),
-	CLK(NULL,	"auxclkreq2_ck",		&auxclkreq2_ck),
-	CLK(NULL,	"auxclk3_src_ck",		&auxclk3_src_ck),
-	CLK(NULL,	"auxclk3_ck",			&auxclk3_ck),
-	CLK(NULL,	"auxclkreq3_ck",		&auxclkreq3_ck),
-	CLK(NULL,	"auxclk4_src_ck",		&auxclk4_src_ck),
-	CLK(NULL,	"auxclk4_ck",			&auxclk4_ck),
-	CLK(NULL,	"auxclkreq4_ck",		&auxclkreq4_ck),
-	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck),
-	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck),
-	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck),
-	CLK("50000000.gpmc",	"fck",			&dummy_ck),
-	CLK("omap_i2c.1",	"ick",			&dummy_ck),
-	CLK("omap_i2c.2",	"ick",			&dummy_ck),
-	CLK("omap_i2c.3",	"ick",			&dummy_ck),
-	CLK("omap_i2c.4",	"ick",			&dummy_ck),
-	CLK(NULL,	"mailboxes_ick",		&dummy_ck),
-	CLK("omap_hsmmc.0",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.1",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.2",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.3",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.4",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.1",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.2",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.3",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.4",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.1",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.2",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.3",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.4",	"ick",			&dummy_ck),
-	CLK(NULL,	"uart1_ick",			&dummy_ck),
-	CLK(NULL,	"uart2_ick",			&dummy_ck),
-	CLK(NULL,	"uart3_ick",			&dummy_ck),
-	CLK(NULL,	"uart4_ick",			&dummy_ck),
-	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck),
-	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck),
-	CLK("usbhs_tll",	"usbtll_fck",		&dummy_ck),
-	CLK("omap_wdt",	"ick",				&dummy_ck),
-	CLK(NULL,	"timer_32k_ck",	&sys_32k_ck),
-	/* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
-	CLK("omap_timer.1",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.2",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.3",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.4",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.9",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.10",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.11",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.5",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.6",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.7",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.8",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4a318000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48032000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48034000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48036000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("40138000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013a000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013c000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013e000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck),
-};
-
-int __init omap4xxx_clk_init(void)
-{
-	int rc;
-
-	if (cpu_is_omap443x()) {
-		cpu_mask = RATE_IN_4430;
-		omap_clocks_register(omap443x_clks, ARRAY_SIZE(omap443x_clks));
-	} else if (cpu_is_omap446x() || cpu_is_omap447x()) {
-		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
-		omap_clocks_register(omap446x_clks, ARRAY_SIZE(omap446x_clks));
-		if (cpu_is_omap447x())
-			pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
-	} else {
-		return 0;
-	}
-
-	omap_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks));
-
-	omap2_clk_disable_autoidle_all();
-
-	/*
-	 * A set rate of ABE DPLL inturn triggers a set rate of USB DPLL
-	 * when its in bypass. So always lock USB before ABE DPLL.
-	 */
-	/*
-	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
-	 * domain can transition to retention state when not in use.
-	 */
-	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure USB DPLL!\n", __func__);
-
-	/*
-	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
-	 * state when turning the ABE clock domain. Workaround this by
-	 * locking the ABE DPLL on boot.
-	 * Lock the ABE DPLL in any case to avoid issues with audio.
-	 */
-	rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-	if (!rc)
-		rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7a394d7..5854677 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -635,7 +635,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = omap4xxx_clk_init;
+	omap_clk_soc_init = omap4xxx_dt_clk_init;
 }
 
 void __init omap4430_init_late(void)
-- 
1.7.9.5

[PATCHv10 38/41] ARM: OMAP: DRA7: Enable clock init

[Tero Kristo]

Initializes clock data from device tree.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5854677..628a7f5 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -692,6 +692,7 @@ void __init dra7xx_init_early(void)
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_soc_init = dra7xx_dt_clk_init;
 }
 
 void __init dra7xx_init_late(void)
-- 
1.7.9.5

[PATCHv10 38/41] ARM: OMAP: DRA7: Enable clock init

[Tero Kristo]

Initializes clock data from device tree.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5854677..628a7f5 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -692,6 +692,7 @@ void __init dra7xx_init_early(void)
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_soc_init = dra7xx_dt_clk_init;
 }
 
 void __init dra7xx_init_late(void)
-- 
1.7.9.5

[PATCHv10 39/41] ARM: AM43xx: Enable clock init

[Tero Kristo]

Initializes clock data from device tree.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 628a7f5..2e0f0fe 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -606,6 +606,7 @@ void __init am43xx_init_early(void)
 	am43xx_clockdomains_init();
 	am43xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_soc_init = am43xx_clk_init;
 }
 
 void __init am43xx_init_late(void)
-- 
1.7.9.5

[PATCHv10 39/41] ARM: AM43xx: Enable clock init

[Tero Kristo]

Initializes clock data from device tree.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 628a7f5..2e0f0fe 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -606,6 +606,7 @@ void __init am43xx_init_early(void)
 	am43xx_clockdomains_init();
 	am43xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_soc_init = am43xx_clk_init;
 }
 
 void __init am43xx_init_late(void)
-- 
1.7.9.5

[PATCHv10 40/41] ARM: AM33xx: remove old clock data and link in new clock init code

[Tero Kristo]

AM33xx clocks have now been moved to DT, thus remove the old data file
and use the new init code under OMAP clock driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile          |    1 -
 arch/arm/mach-omap2/cclock33xx_data.c | 1064 ---------------------------------
 arch/arm/mach-omap2/io.c              |    2 +-
 3 files changed, 1 insertion(+), 1066 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/cclock33xx_data.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e81cb52ac..27fe1ec 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,7 +189,6 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX)		+= cclock33xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
deleted file mode 100644
index 865d30e..0000000
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ /dev/null
@@ -1,1064 +0,0 @@
-/*
- * AM33XX Clock data
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk-private.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-
-#include "am33xx.h"
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "control.h"
-#include "cm.h"
-#include "cm33xx.h"
-#include "cm-regbits-33xx.h"
-#include "prm.h"
-
-/* Modulemode control */
-#define AM33XX_MODULEMODE_HWCTRL_SHIFT		0
-#define AM33XX_MODULEMODE_SWCTRL_SHIFT		1
-
-/*LIST_HEAD(clocks);*/
-
-/* Root clocks */
-
-/* RTC 32k */
-DEFINE_CLK_FIXED_RATE(clk_32768_ck, CLK_IS_ROOT, 32768, 0x0);
-
-/* On-Chip 32KHz RC OSC */
-DEFINE_CLK_FIXED_RATE(clk_rc32k_ck, CLK_IS_ROOT, 32000, 0x0);
-
-/* Crystal input clks */
-DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_24000000_ck, CLK_IS_ROOT, 24000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_25000000_ck, CLK_IS_ROOT, 25000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0);
-
-/* Oscillator clock */
-/* 19.2, 24, 25 or 26 MHz */
-static const char *sys_clkin_ck_parents[] = {
-	"virt_19200000_ck", "virt_24000000_ck", "virt_25000000_ck",
-	"virt_26000000_ck",
-};
-
-/*
- * sys_clk in: input to the dpll and also used as funtional clock for,
- *   adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse
- *
- */
-DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0,
-	       AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS),
-	       AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT,
-	       AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH,
-	       0, NULL);
-
-/* External clock - 12 MHz */
-DEFINE_CLK_FIXED_RATE(tclkin_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-/* Module clocks and DPLL outputs */
-
-/* DPLL_CORE */
-static struct dpll_data dpll_core_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_CORE,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_CORE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_CORE,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKDCOLDO output */
-static const char *dpll_core_ck_parents[] = {
-	"sys_clkin_ck",
-};
-
-static struct clk dpll_core_ck;
-
-static const struct clk_ops dpll_core_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_core_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_core_ck,
-	},
-	.dpll_data	= &dpll_core_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops);
-
-static const char *dpll_core_x2_ck_parents[] = {
-	"dpll_core_ck",
-};
-
-static struct clk dpll_core_x2_ck;
-
-static const struct clk_ops dpll_x2_ck_ops = {
-	.recalc_rate	= &omap3_clkoutx2_recalc,
-};
-
-static struct clk_hw_omap dpll_core_x2_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_core_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_x2_ck_ops);
-
-DEFINE_CLK_DIVIDER(dpll_core_m4_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M4_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
-		   NULL);
-
-DEFINE_CLK_DIVIDER(dpll_core_m5_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M5_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-DEFINE_CLK_DIVIDER(dpll_core_m6_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M6_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-
-/* DPLL_MPU */
-static struct dpll_data dpll_mpu_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_MPU,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_MPU,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_MPU,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_mpu_ck;
-
-static const struct clk_ops dpll_mpu_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_mpu_ck_hw = {
-	.hw = {
-		.clk	= &dpll_mpu_ck,
-	},
-	.dpll_data	= &dpll_mpu_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_mpu_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck,
-		   0x0, AM33XX_CM_DIV_M2_DPLL_MPU, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-/* DPLL_DDR */
-static struct dpll_data dpll_ddr_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_DDR,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_DDR,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_DDR,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_ddr_ck;
-
-static const struct clk_ops dpll_ddr_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static struct clk_hw_omap dpll_ddr_ck_hw = {
-	.hw = {
-		.clk	= &dpll_ddr_ck,
-	},
-	.dpll_data	= &dpll_ddr_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_ddr_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_ddr_m2_ck, "dpll_ddr_ck", &dpll_ddr_ck,
-		   0x0, AM33XX_CM_DIV_M2_DPLL_DDR,
-		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-/* emif_fck functional clock */
-DEFINE_CLK_FIXED_FACTOR(dpll_ddr_m2_div2_ck, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck,
-			0x0, 1, 2);
-
-/* DPLL_DISP */
-static struct dpll_data dpll_disp_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_DISP,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_DISP,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_DISP,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_disp_ck;
-
-static struct clk_hw_omap dpll_disp_ck_hw = {
-	.hw = {
-		.clk	= &dpll_disp_ck,
-	},
-	.dpll_data	= &dpll_disp_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck,
-		   CLK_SET_RATE_PARENT, AM33XX_CM_DIV_M2_DPLL_DISP,
-		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-/* DPLL_PER */
-static struct dpll_data dpll_per_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_PERIPH,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_PER,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_PER,
-	.mult_mask	= AM33XX_DPLL_MULT_PERIPH_MASK,
-	.div1_mask	= AM33XX_DPLL_PER_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-	.flags		= DPLL_J_TYPE,
-};
-
-/* CLKDCOLDO */
-static struct clk dpll_per_ck;
-
-static struct clk_hw_omap dpll_per_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_per_ck,
-	},
-	.dpll_data	= &dpll_per_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/* CLKOUT: fdpll/M2 */
-DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		   AM33XX_CM_DIV_M2_DPLL_PER, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
-		   NULL);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_wkupdm_ck, "dpll_per_m2_ck",
-			&dpll_per_m2_ck, 0x0, 1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_ck, "dpll_per_m2_ck",
-			&dpll_per_m2_ck, 0x0, 1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_core_m4_div2_ck, "dpll_core_m4_ck",
-			&dpll_core_m4_ck, 0x0, 1, 2);
-
-DEFINE_CLK_FIXED_FACTOR(l4_rtc_gclk, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-			1, 2);
-
-DEFINE_CLK_FIXED_FACTOR(clk_24mhz, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1,
-			8);
-
-/*
- * Below clock nodes describes clockdomains derived out
- * of core clock.
- */
-static const struct clk_ops clk_ops_null = {
-};
-
-static const char *l3_gclk_parents[] = {
-	"dpll_core_m4_ck"
-};
-
-static struct clk l3_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l3_gclk, NULL);
-DEFINE_STRUCT_CLK(l3_gclk, l3_gclk_parents, clk_ops_null);
-
-static struct clk l4hs_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4hs_gclk, NULL);
-DEFINE_STRUCT_CLK(l4hs_gclk, l3_gclk_parents, clk_ops_null);
-
-static const char *l3s_gclk_parents[] = {
-	"dpll_core_m4_div2_ck"
-};
-
-static struct clk l3s_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l3s_gclk, NULL);
-DEFINE_STRUCT_CLK(l3s_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk l4fw_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4fw_gclk, NULL);
-DEFINE_STRUCT_CLK(l4fw_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk l4ls_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4ls_gclk, NULL);
-DEFINE_STRUCT_CLK(l4ls_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk sysclk_div_ck;
-DEFINE_STRUCT_CLK_HW_OMAP(sysclk_div_ck, NULL);
-DEFINE_STRUCT_CLK(sysclk_div_ck, l3_gclk_parents, clk_ops_null);
-
-/*
- * In order to match the clock domain with hwmod clockdomain entry,
- * separate clock nodes is required for the modules which are
- * directly getting their funtioncal clock from sys_clkin.
- */
-static struct clk adc_tsc_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(adc_tsc_fck, NULL);
-DEFINE_STRUCT_CLK(adc_tsc_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk dcan0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(dcan0_fck, NULL);
-DEFINE_STRUCT_CLK(dcan0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk dcan1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(dcan1_fck, NULL);
-DEFINE_STRUCT_CLK(dcan1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk mcasp0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(mcasp0_fck, NULL);
-DEFINE_STRUCT_CLK(mcasp0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk mcasp1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(mcasp1_fck, NULL);
-DEFINE_STRUCT_CLK(mcasp1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk smartreflex0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex0_fck, NULL);
-DEFINE_STRUCT_CLK(smartreflex0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk smartreflex1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex1_fck, NULL);
-DEFINE_STRUCT_CLK(smartreflex1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk sha0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(sha0_fck, NULL);
-DEFINE_STRUCT_CLK(sha0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk aes0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL);
-DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk rng_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(rng_fck, NULL);
-DEFINE_STRUCT_CLK(rng_fck, dpll_core_ck_parents, clk_ops_null);
-
-/*
- * Modules clock nodes
- *
- * The following clock leaf nodes are added for the moment because:
- *
- *  - hwmod data is not present for these modules, either hwmod
- *    control is not required or its not populated.
- *  - Driver code is not yet migrated to use hwmod/runtime pm
- *  - Modules outside kernel access (to disable them by default)
- *
- *     - mmu (gfx domain)
- *     - cefuse
- *     - usbotg_fck (its additional clock and not really a modulemode)
- *     - ieee5000
- */
-
-DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-		AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
-		AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-/*
- * clkdiv32 is generated from fixed division of 732.4219
- */
-DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
-
-static struct clk clkdiv32k_ick;
-
-static const char *clkdiv32k_ick_parent_names[] = {
-	"clkdiv32k_ck",
-};
-
-static const struct clk_ops clkdiv32k_ick_ops = {
-	.enable         = &omap2_dflt_clk_enable,
-	.disable        = &omap2_dflt_clk_disable,
-	.is_enabled     = &omap2_dflt_clk_is_enabled,
-	.init           = &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap clkdiv32k_ick_hw = {
-	.hw	= {
-		.clk	= &clkdiv32k_ick,
-	},
-	.enable_reg	= AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
-	.enable_bit	= AM33XX_MODULEMODE_SWCTRL_SHIFT,
-	.clkdm_name	= "clk_24mhz_clkdm",
-};
-
-DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
-
-/* "usbotg_fck" is an additional clock and not really a modulemode */
-DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		AM33XX_CM_CLKDCOLDO_DPLL_PER, AM33XX_ST_DPLL_CLKDCOLDO_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(ieee5000_fck, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck,
-		0x0, AM33XX_CM_PER_IEEE5000_CLKCTRL,
-		AM33XX_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-/* Timers */
-static const struct clksel timer1_clkmux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
-	{ .parent = &tclkin_ck, .rates = div_1_2_rates },
-	{ .parent = &clk_rc32k_ck, .rates = div_1_3_rates },
-	{ .parent = &clk_32768_ck, .rates = div_1_4_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer1_ck_parents[] = {
-	"sys_clkin_ck", "clkdiv32k_ick", "tclkin_ck", "clk_rc32k_ck",
-	"clk_32768_ck",
-};
-
-static struct clk timer1_fck;
-
-static const struct clk_ops timer1_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap timer1_fck_hw = {
-	.hw	= {
-		.clk	= &timer1_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer1_clkmux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER1MS_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_2_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer1_fck, timer1_ck_parents, timer1_fck_ops);
-
-static const struct clksel timer2_to_7_clk_sel[] = {
-	{ .parent = &tclkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_clkin_ck, .rates = div_1_1_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer2_to_7_ck_parents[] = {
-	"tclkin_ck", "sys_clkin_ck", "clkdiv32k_ick",
-};
-
-static struct clk timer2_fck;
-
-static struct clk_hw_omap timer2_fck_hw = {
-	.hw	= {
-		.clk	= &timer2_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER2_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer2_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer3_fck;
-
-static struct clk_hw_omap timer3_fck_hw = {
-	.hw	= {
-		.clk	= &timer3_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER3_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer3_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer4_fck;
-
-static struct clk_hw_omap timer4_fck_hw = {
-	.hw	= {
-		.clk	= &timer4_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER4_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer4_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer5_fck;
-
-static struct clk_hw_omap timer5_fck_hw = {
-	.hw	= {
-		.clk	= &timer5_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER5_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer5_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer6_fck;
-
-static struct clk_hw_omap timer6_fck_hw = {
-	.hw	= {
-		.clk	= &timer6_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER6_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer6_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer7_fck;
-
-static struct clk_hw_omap timer7_fck_hw = {
-	.hw	= {
-		.clk	= &timer7_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER7_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer7_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-DEFINE_CLK_FIXED_FACTOR(cpsw_125mhz_gclk,
-			"dpll_core_m5_ck",
-			&dpll_core_m5_ck,
-			0x0,
-			1, 2);
-
-static const struct clk_ops cpsw_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-};
-
-static const struct clksel cpsw_cpts_rft_clkmux_sel[] = {
-	{ .parent = &dpll_core_m5_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m4_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *cpsw_cpts_rft_ck_parents[] = {
-	"dpll_core_m5_ck", "dpll_core_m4_ck",
-};
-
-static struct clk cpsw_cpts_rft_clk;
-
-static struct clk_hw_omap cpsw_cpts_rft_clk_hw = {
-	.hw	= {
-		.clk	= &cpsw_cpts_rft_clk,
-	},
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.clksel		= cpsw_cpts_rft_clkmux_sel,
-	.clksel_reg	= AM33XX_CM_CPTS_RFT_CLKSEL,
-	.clksel_mask	= AM33XX_CLKSEL_0_0_MASK,
-};
-
-DEFINE_STRUCT_CLK(cpsw_cpts_rft_clk, cpsw_cpts_rft_ck_parents, cpsw_fck_ops);
-
-
-/* gpio */
-static const char *gpio0_ck_parents[] = {
-	"clk_rc32k_ck", "clk_32768_ck", "clkdiv32k_ick",
-};
-
-static const struct clksel gpio0_dbclk_mux_sel[] = {
-	{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
-	{ .parent = &clk_32768_ck, .rates = div_1_1_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const struct clk_ops gpio_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk gpio0_dbclk_mux_ck;
-
-static struct clk_hw_omap gpio0_dbclk_mux_ck_hw = {
-	.hw	= {
-		.clk	= &gpio0_dbclk_mux_ck,
-	},
-	.clkdm_name	= "l4_wkup_clkdm",
-	.clksel		= gpio0_dbclk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_GPIO0_DBCLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(gpio0_dbclk_mux_ck, gpio0_ck_parents, gpio_fck_ops);
-
-DEFINE_CLK_GATE(gpio0_dbclk, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, 0x0,
-		AM33XX_CM_WKUP_GPIO0_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio1_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO1_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio2_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO2_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio3_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO3_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT, 0x0, NULL);
-
-
-static const char *pruss_ck_parents[] = {
-	"l3_gclk", "dpll_disp_m2_ck",
-};
-
-static const struct clksel pruss_ocp_clk_mux_sel[] = {
-	{ .parent = &l3_gclk, .rates = div_1_0_rates },
-	{ .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pruss_ocp_gclk;
-
-static struct clk_hw_omap pruss_ocp_gclk_hw = {
-	.hw	= {
-		.clk	= &pruss_ocp_gclk,
-	},
-	.clkdm_name	= "pruss_ocp_clkdm",
-	.clksel		= pruss_ocp_clk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_PRUSS_OCP_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_0_MASK,
-};
-
-DEFINE_STRUCT_CLK(pruss_ocp_gclk, pruss_ck_parents, gpio_fck_ops);
-
-static const char *lcd_ck_parents[] = {
-	"dpll_disp_m2_ck", "dpll_core_m5_ck", "dpll_per_m2_ck",
-};
-
-static const struct clksel lcd_clk_mux_sel[] = {
-	{ .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m5_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk lcd_gclk;
-
-static struct clk_hw_omap lcd_gclk_hw = {
-	.hw	= {
-		.clk	= &lcd_gclk,
-	},
-	.clkdm_name	= "lcdc_clkdm",
-	.clksel		= lcd_clk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_LCDC_PIXEL_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK_FLAGS(lcd_gclk, lcd_ck_parents,
-			gpio_fck_ops, CLK_SET_RATE_PARENT);
-
-DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2);
-
-static const char *gfx_ck_parents[] = {
-	"dpll_core_m4_ck", "dpll_per_m2_ck",
-};
-
-static const struct clksel gfx_clksel_sel[] = {
-	{ .parent = &dpll_core_m4_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gfx_fclk_clksel_ck;
-
-static struct clk_hw_omap gfx_fclk_clksel_ck_hw = {
-	.hw	= {
-		.clk	= &gfx_fclk_clksel_ck,
-	},
-	.clksel		= gfx_clksel_sel,
-	.clksel_reg	= AM33XX_CLKSEL_GFX_FCLK,
-	.clksel_mask	= AM33XX_CLKSEL_GFX_FCLK_MASK,
-};
-
-DEFINE_STRUCT_CLK(gfx_fclk_clksel_ck, gfx_ck_parents, gpio_fck_ops);
-
-static const struct clk_div_table div_1_0_2_1_rates[] = {
-	{ .div = 1, .val = 0, },
-	{ .div = 2, .val = 1, },
-	{ .div = 0 },
-};
-
-DEFINE_CLK_DIVIDER_TABLE(gfx_fck_div_ck, "gfx_fclk_clksel_ck",
-			 &gfx_fclk_clksel_ck, 0x0, AM33XX_CLKSEL_GFX_FCLK,
-			 AM33XX_CLKSEL_0_0_SHIFT, AM33XX_CLKSEL_0_0_WIDTH,
-			 0x0, div_1_0_2_1_rates, NULL);
-
-static const char *sysclkout_ck_parents[] = {
-	"clk_32768_ck", "l3_gclk", "dpll_ddr_m2_ck", "dpll_per_m2_ck",
-	"lcd_gclk",
-};
-
-static const struct clksel sysclkout_pre_sel[] = {
-	{ .parent = &clk_32768_ck, .rates = div_1_0_rates },
-	{ .parent = &l3_gclk, .rates = div_1_1_rates },
-	{ .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_3_rates },
-	{ .parent = &lcd_gclk, .rates = div_1_4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sysclkout_pre_ck;
-
-static struct clk_hw_omap sysclkout_pre_ck_hw = {
-	.hw	= {
-		.clk	= &sysclkout_pre_ck,
-	},
-	.clksel		= sysclkout_pre_sel,
-	.clksel_reg	= AM33XX_CM_CLKOUT_CTRL,
-	.clksel_mask	= AM33XX_CLKOUT2SOURCE_MASK,
-};
-
-DEFINE_STRUCT_CLK(sysclkout_pre_ck, sysclkout_ck_parents, gpio_fck_ops);
-
-/* Divide by 8 clock rates with default clock is 1/1*/
-static const struct clk_div_table div8_rates[] = {
-	{ .div = 1, .val = 0, },
-	{ .div = 2, .val = 1, },
-	{ .div = 3, .val = 2, },
-	{ .div = 4, .val = 3, },
-	{ .div = 5, .val = 4, },
-	{ .div = 6, .val = 5, },
-	{ .div = 7, .val = 6, },
-	{ .div = 8, .val = 7, },
-	{ .div = 0 },
-};
-
-DEFINE_CLK_DIVIDER_TABLE(clkout2_div_ck, "sysclkout_pre_ck", &sysclkout_pre_ck,
-			 0x0, AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2DIV_SHIFT,
-			 AM33XX_CLKOUT2DIV_WIDTH, 0x0, div8_rates, NULL);
-
-DEFINE_CLK_GATE(clkout2_ck, "clkout2_div_ck", &clkout2_div_ck, 0x0,
-		AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2EN_SHIFT, 0x0, NULL);
-
-static const char *wdt_ck_parents[] = {
-	"clk_rc32k_ck", "clkdiv32k_ick",
-};
-
-static const struct clksel wdt_clkmux_sel[] = {
-	{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk wdt1_fck;
-
-static struct clk_hw_omap wdt1_fck_hw = {
-	.hw	= {
-		.clk	= &wdt1_fck,
-	},
-	.clkdm_name	= "l4_wkup_clkdm",
-	.clksel		= wdt_clkmux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_WDT1_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops);
-
-static const char *pwmss_clk_parents[] = {
-	"dpll_per_m2_ck",
-};
-
-static const struct clk_ops ehrpwm_tbclk_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm0_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS0_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm1_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS1_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm2_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS2_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-/*
- * debugss optional clocks
- */
-DEFINE_CLK_GATE(dbg_sysclk_ck, "sys_clkin_ck", &sys_clkin_ck,
-		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dbg_clka_ck, "dpll_core_m4_ck", &dpll_core_m4_ck,
-		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		AM33XX_OPTCLK_DEBUG_CLKA_SHIFT, 0x0, NULL);
-
-static const char *stm_pmd_clock_mux_ck_parents[] = {
-	"dbg_sysclk_ck", "dbg_clka_ck",
-};
-
-DEFINE_CLK_MUX(stm_pmd_clock_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
-	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_STM_PMD_CLKSEL_SHIFT,
-	       AM33XX_STM_PMD_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(trace_pmd_clk_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
-	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-	       AM33XX_TRC_PMD_CLKSEL_SHIFT,
-	       AM33XX_TRC_PMD_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(stm_clk_div_ck, "stm_pmd_clock_mux_ck",
-		   &stm_pmd_clock_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		   AM33XX_STM_PMD_CLKDIVSEL_SHIFT,
-		   AM33XX_STM_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-DEFINE_CLK_DIVIDER(trace_clk_div_ck, "trace_pmd_clk_mux_ck",
-		   &trace_pmd_clk_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		   AM33XX_TRC_PMD_CLKDIVSEL_SHIFT,
-		   AM33XX_TRC_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-/*
- * clkdev
- */
-static struct omap_clk am33xx_clks[] = {
-	CLK(NULL,	"clk_32768_ck",		&clk_32768_ck),
-	CLK(NULL,	"clk_rc32k_ck",		&clk_rc32k_ck),
-	CLK(NULL,	"virt_19200000_ck",	&virt_19200000_ck),
-	CLK(NULL,	"virt_24000000_ck",	&virt_24000000_ck),
-	CLK(NULL,	"virt_25000000_ck",	&virt_25000000_ck),
-	CLK(NULL,	"virt_26000000_ck",	&virt_26000000_ck),
-	CLK(NULL,	"sys_clkin_ck",		&sys_clkin_ck),
-	CLK(NULL,	"tclkin_ck",		&tclkin_ck),
-	CLK(NULL,	"dpll_core_ck",		&dpll_core_ck),
-	CLK(NULL,	"dpll_core_x2_ck",	&dpll_core_x2_ck),
-	CLK(NULL,	"dpll_core_m4_ck",	&dpll_core_m4_ck),
-	CLK(NULL,	"dpll_core_m5_ck",	&dpll_core_m5_ck),
-	CLK(NULL,	"dpll_core_m6_ck",	&dpll_core_m6_ck),
-	CLK(NULL,	"dpll_mpu_ck",		&dpll_mpu_ck),
-	CLK("cpu0",	NULL,			&dpll_mpu_ck),
-	CLK(NULL,	"dpll_mpu_m2_ck",	&dpll_mpu_m2_ck),
-	CLK(NULL,	"dpll_ddr_ck",		&dpll_ddr_ck),
-	CLK(NULL,	"dpll_ddr_m2_ck",	&dpll_ddr_m2_ck),
-	CLK(NULL,	"dpll_ddr_m2_div2_ck",	&dpll_ddr_m2_div2_ck),
-	CLK(NULL,	"dpll_disp_ck",		&dpll_disp_ck),
-	CLK(NULL,	"dpll_disp_m2_ck",	&dpll_disp_m2_ck),
-	CLK(NULL,	"dpll_per_ck",		&dpll_per_ck),
-	CLK(NULL,	"dpll_per_m2_ck",	&dpll_per_m2_ck),
-	CLK(NULL,	"dpll_per_m2_div4_wkupdm_ck",	&dpll_per_m2_div4_wkupdm_ck),
-	CLK(NULL,	"dpll_per_m2_div4_ck",	&dpll_per_m2_div4_ck),
-	CLK(NULL,	"adc_tsc_fck",		&adc_tsc_fck),
-	CLK(NULL,	"cefuse_fck",		&cefuse_fck),
-	CLK(NULL,	"clkdiv32k_ck",		&clkdiv32k_ck),
-	CLK(NULL,	"clkdiv32k_ick",	&clkdiv32k_ick),
-	CLK(NULL,	"dcan0_fck",		&dcan0_fck),
-	CLK("481cc000.d_can",	NULL,		&dcan0_fck),
-	CLK(NULL,	"dcan1_fck",		&dcan1_fck),
-	CLK("481d0000.d_can",	NULL,		&dcan1_fck),
-	CLK(NULL,	"pruss_ocp_gclk",	&pruss_ocp_gclk),
-	CLK(NULL,	"mcasp0_fck",		&mcasp0_fck),
-	CLK(NULL,	"mcasp1_fck",		&mcasp1_fck),
-	CLK(NULL,	"mmu_fck",		&mmu_fck),
-	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck),
-	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck),
-	CLK(NULL,	"sha0_fck",		&sha0_fck),
-	CLK(NULL,	"aes0_fck",		&aes0_fck),
-	CLK(NULL,	"rng_fck",		&rng_fck),
-	CLK(NULL,	"timer1_fck",		&timer1_fck),
-	CLK(NULL,	"timer2_fck",		&timer2_fck),
-	CLK(NULL,	"timer3_fck",		&timer3_fck),
-	CLK(NULL,	"timer4_fck",		&timer4_fck),
-	CLK(NULL,	"timer5_fck",		&timer5_fck),
-	CLK(NULL,	"timer6_fck",		&timer6_fck),
-	CLK(NULL,	"timer7_fck",		&timer7_fck),
-	CLK(NULL,	"usbotg_fck",		&usbotg_fck),
-	CLK(NULL,	"ieee5000_fck",		&ieee5000_fck),
-	CLK(NULL,	"wdt1_fck",		&wdt1_fck),
-	CLK(NULL,	"l4_rtc_gclk",		&l4_rtc_gclk),
-	CLK(NULL,	"l3_gclk",		&l3_gclk),
-	CLK(NULL,	"dpll_core_m4_div2_ck",	&dpll_core_m4_div2_ck),
-	CLK(NULL,	"l4hs_gclk",		&l4hs_gclk),
-	CLK(NULL,	"l3s_gclk",		&l3s_gclk),
-	CLK(NULL,	"l4fw_gclk",		&l4fw_gclk),
-	CLK(NULL,	"l4ls_gclk",		&l4ls_gclk),
-	CLK(NULL,	"clk_24mhz",		&clk_24mhz),
-	CLK(NULL,	"sysclk_div_ck",	&sysclk_div_ck),
-	CLK(NULL,	"cpsw_125mhz_gclk",	&cpsw_125mhz_gclk),
-	CLK(NULL,	"cpsw_cpts_rft_clk",	&cpsw_cpts_rft_clk),
-	CLK(NULL,	"gpio0_dbclk_mux_ck",	&gpio0_dbclk_mux_ck),
-	CLK(NULL,	"gpio0_dbclk",		&gpio0_dbclk),
-	CLK(NULL,	"gpio1_dbclk",		&gpio1_dbclk),
-	CLK(NULL,	"gpio2_dbclk",		&gpio2_dbclk),
-	CLK(NULL,	"gpio3_dbclk",		&gpio3_dbclk),
-	CLK(NULL,	"lcd_gclk",		&lcd_gclk),
-	CLK(NULL,	"mmc_clk",		&mmc_clk),
-	CLK(NULL,	"gfx_fclk_clksel_ck",	&gfx_fclk_clksel_ck),
-	CLK(NULL,	"gfx_fck_div_ck",	&gfx_fck_div_ck),
-	CLK(NULL,	"sysclkout_pre_ck",	&sysclkout_pre_ck),
-	CLK(NULL,	"clkout2_div_ck",	&clkout2_div_ck),
-	CLK(NULL,	"timer_32k_ck",		&clkdiv32k_ick),
-	CLK(NULL,	"timer_sys_ck",		&sys_clkin_ck),
-	CLK(NULL,	"dbg_sysclk_ck",	&dbg_sysclk_ck),
-	CLK(NULL,	"dbg_clka_ck",		&dbg_clka_ck),
-	CLK(NULL,	"stm_pmd_clock_mux_ck",	&stm_pmd_clock_mux_ck),
-	CLK(NULL,	"trace_pmd_clk_mux_ck",	&trace_pmd_clk_mux_ck),
-	CLK(NULL,	"stm_clk_div_ck",	&stm_clk_div_ck),
-	CLK(NULL,	"trace_clk_div_ck",	&trace_clk_div_ck),
-	CLK(NULL,	"clkout2_ck",		&clkout2_ck),
-	CLK("48300200.ehrpwm",	"tbclk",	&ehrpwm0_tbclk),
-	CLK("48302200.ehrpwm",	"tbclk",	&ehrpwm1_tbclk),
-	CLK("48304200.ehrpwm",	"tbclk",	&ehrpwm2_tbclk),
-};
-
-
-static const char *enable_init_clks[] = {
-	"dpll_ddr_m2_ck",
-	"dpll_mpu_m2_ck",
-	"l3_gclk",
-	"l4hs_gclk",
-	"l4fw_gclk",
-	"l4ls_gclk",
-	"clkout2_ck",	/* Required for external peripherals like, Audio codecs */
-};
-
-int __init am33xx_clk_init(void)
-{
-	if (soc_is_am33xx())
-		cpu_mask = RATE_IN_AM33XX;
-
-	omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks));
-
-	omap2_clk_disable_autoidle_all();
-
-	omap2_clk_enable_init_clocks(enable_init_clks,
-				     ARRAY_SIZE(enable_init_clks));
-
-	/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
-	 *    physically present, in such a case HWMOD enabling of
-	 *    clock would be failure with default parent. And timer
-	 *    probe thinks clock is already enabled, this leads to
-	 *    crash upon accessing timer 3 & 6 registers in probe.
-	 *    Fix by setting parent of both these timers to master
-	 *    oscillator clock.
-	 */
-
-	clk_set_parent(&timer3_fck, &sys_clkin_ck);
-	clk_set_parent(&timer6_fck, &sys_clkin_ck);
-	/*
-	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
-	 * the design/spec, so as a result, for example, timer which supposed
-	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
-	 * not expected by any use-case, so change WDT1 clock source to PRCM
-	 * 32KHz clock.
-	 */
-	clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2e0f0fe..0937e50 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -581,7 +581,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = am33xx_clk_init;
+	omap_clk_soc_init = am33xx_dt_clk_init;
 }
 
 void __init am33xx_init_late(void)
-- 
1.7.9.5

[PATCHv10 40/41] ARM: AM33xx: remove old clock data and link in new clock init code

[Tero Kristo]

AM33xx clocks have now been moved to DT, thus remove the old data file
and use the new init code under OMAP clock driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile          |    1 -
 arch/arm/mach-omap2/cclock33xx_data.c | 1064 ---------------------------------
 arch/arm/mach-omap2/io.c              |    2 +-
 3 files changed, 1 insertion(+), 1066 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/cclock33xx_data.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e81cb52ac..27fe1ec 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,7 +189,6 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX)		+= cclock33xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
deleted file mode 100644
index 865d30e..0000000
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ /dev/null
@@ -1,1064 +0,0 @@
-/*
- * AM33XX Clock data
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk-private.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-
-#include "am33xx.h"
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "control.h"
-#include "cm.h"
-#include "cm33xx.h"
-#include "cm-regbits-33xx.h"
-#include "prm.h"
-
-/* Modulemode control */
-#define AM33XX_MODULEMODE_HWCTRL_SHIFT		0
-#define AM33XX_MODULEMODE_SWCTRL_SHIFT		1
-
-/*LIST_HEAD(clocks);*/
-
-/* Root clocks */
-
-/* RTC 32k */
-DEFINE_CLK_FIXED_RATE(clk_32768_ck, CLK_IS_ROOT, 32768, 0x0);
-
-/* On-Chip 32KHz RC OSC */
-DEFINE_CLK_FIXED_RATE(clk_rc32k_ck, CLK_IS_ROOT, 32000, 0x0);
-
-/* Crystal input clks */
-DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_24000000_ck, CLK_IS_ROOT, 24000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_25000000_ck, CLK_IS_ROOT, 25000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0);
-
-/* Oscillator clock */
-/* 19.2, 24, 25 or 26 MHz */
-static const char *sys_clkin_ck_parents[] = {
-	"virt_19200000_ck", "virt_24000000_ck", "virt_25000000_ck",
-	"virt_26000000_ck",
-};
-
-/*
- * sys_clk in: input to the dpll and also used as funtional clock for,
- *   adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse
- *
- */
-DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0,
-	       AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS),
-	       AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT,
-	       AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH,
-	       0, NULL);
-
-/* External clock - 12 MHz */
-DEFINE_CLK_FIXED_RATE(tclkin_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-/* Module clocks and DPLL outputs */
-
-/* DPLL_CORE */
-static struct dpll_data dpll_core_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_CORE,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_CORE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_CORE,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKDCOLDO output */
-static const char *dpll_core_ck_parents[] = {
-	"sys_clkin_ck",
-};
-
-static struct clk dpll_core_ck;
-
-static const struct clk_ops dpll_core_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_core_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_core_ck,
-	},
-	.dpll_data	= &dpll_core_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops);
-
-static const char *dpll_core_x2_ck_parents[] = {
-	"dpll_core_ck",
-};
-
-static struct clk dpll_core_x2_ck;
-
-static const struct clk_ops dpll_x2_ck_ops = {
-	.recalc_rate	= &omap3_clkoutx2_recalc,
-};
-
-static struct clk_hw_omap dpll_core_x2_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_core_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_x2_ck_ops);
-
-DEFINE_CLK_DIVIDER(dpll_core_m4_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M4_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
-		   NULL);
-
-DEFINE_CLK_DIVIDER(dpll_core_m5_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M5_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-DEFINE_CLK_DIVIDER(dpll_core_m6_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M6_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-
-/* DPLL_MPU */
-static struct dpll_data dpll_mpu_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_MPU,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_MPU,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_MPU,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_mpu_ck;
-
-static const struct clk_ops dpll_mpu_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_mpu_ck_hw = {
-	.hw = {
-		.clk	= &dpll_mpu_ck,
-	},
-	.dpll_data	= &dpll_mpu_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_mpu_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck,
-		   0x0, AM33XX_CM_DIV_M2_DPLL_MPU, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-/* DPLL_DDR */
-static struct dpll_data dpll_ddr_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_DDR,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_DDR,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_DDR,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_ddr_ck;
-
-static const struct clk_ops dpll_ddr_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static struct clk_hw_omap dpll_ddr_ck_hw = {
-	.hw = {
-		.clk	= &dpll_ddr_ck,
-	},
-	.dpll_data	= &dpll_ddr_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_ddr_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_ddr_m2_ck, "dpll_ddr_ck", &dpll_ddr_ck,
-		   0x0, AM33XX_CM_DIV_M2_DPLL_DDR,
-		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-/* emif_fck functional clock */
-DEFINE_CLK_FIXED_FACTOR(dpll_ddr_m2_div2_ck, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck,
-			0x0, 1, 2);
-
-/* DPLL_DISP */
-static struct dpll_data dpll_disp_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_DISP,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_DISP,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_DISP,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_disp_ck;
-
-static struct clk_hw_omap dpll_disp_ck_hw = {
-	.hw = {
-		.clk	= &dpll_disp_ck,
-	},
-	.dpll_data	= &dpll_disp_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck,
-		   CLK_SET_RATE_PARENT, AM33XX_CM_DIV_M2_DPLL_DISP,
-		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-/* DPLL_PER */
-static struct dpll_data dpll_per_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_PERIPH,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_PER,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_PER,
-	.mult_mask	= AM33XX_DPLL_MULT_PERIPH_MASK,
-	.div1_mask	= AM33XX_DPLL_PER_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-	.flags		= DPLL_J_TYPE,
-};
-
-/* CLKDCOLDO */
-static struct clk dpll_per_ck;
-
-static struct clk_hw_omap dpll_per_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_per_ck,
-	},
-	.dpll_data	= &dpll_per_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/* CLKOUT: fdpll/M2 */
-DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		   AM33XX_CM_DIV_M2_DPLL_PER, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
-		   NULL);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_wkupdm_ck, "dpll_per_m2_ck",
-			&dpll_per_m2_ck, 0x0, 1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_ck, "dpll_per_m2_ck",
-			&dpll_per_m2_ck, 0x0, 1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_core_m4_div2_ck, "dpll_core_m4_ck",
-			&dpll_core_m4_ck, 0x0, 1, 2);
-
-DEFINE_CLK_FIXED_FACTOR(l4_rtc_gclk, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-			1, 2);
-
-DEFINE_CLK_FIXED_FACTOR(clk_24mhz, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1,
-			8);
-
-/*
- * Below clock nodes describes clockdomains derived out
- * of core clock.
- */
-static const struct clk_ops clk_ops_null = {
-};
-
-static const char *l3_gclk_parents[] = {
-	"dpll_core_m4_ck"
-};
-
-static struct clk l3_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l3_gclk, NULL);
-DEFINE_STRUCT_CLK(l3_gclk, l3_gclk_parents, clk_ops_null);
-
-static struct clk l4hs_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4hs_gclk, NULL);
-DEFINE_STRUCT_CLK(l4hs_gclk, l3_gclk_parents, clk_ops_null);
-
-static const char *l3s_gclk_parents[] = {
-	"dpll_core_m4_div2_ck"
-};
-
-static struct clk l3s_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l3s_gclk, NULL);
-DEFINE_STRUCT_CLK(l3s_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk l4fw_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4fw_gclk, NULL);
-DEFINE_STRUCT_CLK(l4fw_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk l4ls_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4ls_gclk, NULL);
-DEFINE_STRUCT_CLK(l4ls_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk sysclk_div_ck;
-DEFINE_STRUCT_CLK_HW_OMAP(sysclk_div_ck, NULL);
-DEFINE_STRUCT_CLK(sysclk_div_ck, l3_gclk_parents, clk_ops_null);
-
-/*
- * In order to match the clock domain with hwmod clockdomain entry,
- * separate clock nodes is required for the modules which are
- * directly getting their funtioncal clock from sys_clkin.
- */
-static struct clk adc_tsc_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(adc_tsc_fck, NULL);
-DEFINE_STRUCT_CLK(adc_tsc_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk dcan0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(dcan0_fck, NULL);
-DEFINE_STRUCT_CLK(dcan0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk dcan1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(dcan1_fck, NULL);
-DEFINE_STRUCT_CLK(dcan1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk mcasp0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(mcasp0_fck, NULL);
-DEFINE_STRUCT_CLK(mcasp0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk mcasp1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(mcasp1_fck, NULL);
-DEFINE_STRUCT_CLK(mcasp1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk smartreflex0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex0_fck, NULL);
-DEFINE_STRUCT_CLK(smartreflex0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk smartreflex1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex1_fck, NULL);
-DEFINE_STRUCT_CLK(smartreflex1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk sha0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(sha0_fck, NULL);
-DEFINE_STRUCT_CLK(sha0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk aes0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL);
-DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk rng_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(rng_fck, NULL);
-DEFINE_STRUCT_CLK(rng_fck, dpll_core_ck_parents, clk_ops_null);
-
-/*
- * Modules clock nodes
- *
- * The following clock leaf nodes are added for the moment because:
- *
- *  - hwmod data is not present for these modules, either hwmod
- *    control is not required or its not populated.
- *  - Driver code is not yet migrated to use hwmod/runtime pm
- *  - Modules outside kernel access (to disable them by default)
- *
- *     - mmu (gfx domain)
- *     - cefuse
- *     - usbotg_fck (its additional clock and not really a modulemode)
- *     - ieee5000
- */
-
-DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-		AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
-		AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-/*
- * clkdiv32 is generated from fixed division of 732.4219
- */
-DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
-
-static struct clk clkdiv32k_ick;
-
-static const char *clkdiv32k_ick_parent_names[] = {
-	"clkdiv32k_ck",
-};
-
-static const struct clk_ops clkdiv32k_ick_ops = {
-	.enable         = &omap2_dflt_clk_enable,
-	.disable        = &omap2_dflt_clk_disable,
-	.is_enabled     = &omap2_dflt_clk_is_enabled,
-	.init           = &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap clkdiv32k_ick_hw = {
-	.hw	= {
-		.clk	= &clkdiv32k_ick,
-	},
-	.enable_reg	= AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
-	.enable_bit	= AM33XX_MODULEMODE_SWCTRL_SHIFT,
-	.clkdm_name	= "clk_24mhz_clkdm",
-};
-
-DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
-
-/* "usbotg_fck" is an additional clock and not really a modulemode */
-DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		AM33XX_CM_CLKDCOLDO_DPLL_PER, AM33XX_ST_DPLL_CLKDCOLDO_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(ieee5000_fck, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck,
-		0x0, AM33XX_CM_PER_IEEE5000_CLKCTRL,
-		AM33XX_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-/* Timers */
-static const struct clksel timer1_clkmux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
-	{ .parent = &tclkin_ck, .rates = div_1_2_rates },
-	{ .parent = &clk_rc32k_ck, .rates = div_1_3_rates },
-	{ .parent = &clk_32768_ck, .rates = div_1_4_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer1_ck_parents[] = {
-	"sys_clkin_ck", "clkdiv32k_ick", "tclkin_ck", "clk_rc32k_ck",
-	"clk_32768_ck",
-};
-
-static struct clk timer1_fck;
-
-static const struct clk_ops timer1_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap timer1_fck_hw = {
-	.hw	= {
-		.clk	= &timer1_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer1_clkmux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER1MS_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_2_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer1_fck, timer1_ck_parents, timer1_fck_ops);
-
-static const struct clksel timer2_to_7_clk_sel[] = {
-	{ .parent = &tclkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_clkin_ck, .rates = div_1_1_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer2_to_7_ck_parents[] = {
-	"tclkin_ck", "sys_clkin_ck", "clkdiv32k_ick",
-};
-
-static struct clk timer2_fck;
-
-static struct clk_hw_omap timer2_fck_hw = {
-	.hw	= {
-		.clk	= &timer2_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER2_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer2_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer3_fck;
-
-static struct clk_hw_omap timer3_fck_hw = {
-	.hw	= {
-		.clk	= &timer3_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER3_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer3_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer4_fck;
-
-static struct clk_hw_omap timer4_fck_hw = {
-	.hw	= {
-		.clk	= &timer4_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER4_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer4_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer5_fck;
-
-static struct clk_hw_omap timer5_fck_hw = {
-	.hw	= {
-		.clk	= &timer5_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER5_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer5_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer6_fck;
-
-static struct clk_hw_omap timer6_fck_hw = {
-	.hw	= {
-		.clk	= &timer6_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER6_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer6_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer7_fck;
-
-static struct clk_hw_omap timer7_fck_hw = {
-	.hw	= {
-		.clk	= &timer7_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER7_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer7_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-DEFINE_CLK_FIXED_FACTOR(cpsw_125mhz_gclk,
-			"dpll_core_m5_ck",
-			&dpll_core_m5_ck,
-			0x0,
-			1, 2);
-
-static const struct clk_ops cpsw_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-};
-
-static const struct clksel cpsw_cpts_rft_clkmux_sel[] = {
-	{ .parent = &dpll_core_m5_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m4_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *cpsw_cpts_rft_ck_parents[] = {
-	"dpll_core_m5_ck", "dpll_core_m4_ck",
-};
-
-static struct clk cpsw_cpts_rft_clk;
-
-static struct clk_hw_omap cpsw_cpts_rft_clk_hw = {
-	.hw	= {
-		.clk	= &cpsw_cpts_rft_clk,
-	},
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.clksel		= cpsw_cpts_rft_clkmux_sel,
-	.clksel_reg	= AM33XX_CM_CPTS_RFT_CLKSEL,
-	.clksel_mask	= AM33XX_CLKSEL_0_0_MASK,
-};
-
-DEFINE_STRUCT_CLK(cpsw_cpts_rft_clk, cpsw_cpts_rft_ck_parents, cpsw_fck_ops);
-
-
-/* gpio */
-static const char *gpio0_ck_parents[] = {
-	"clk_rc32k_ck", "clk_32768_ck", "clkdiv32k_ick",
-};
-
-static const struct clksel gpio0_dbclk_mux_sel[] = {
-	{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
-	{ .parent = &clk_32768_ck, .rates = div_1_1_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const struct clk_ops gpio_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk gpio0_dbclk_mux_ck;
-
-static struct clk_hw_omap gpio0_dbclk_mux_ck_hw = {
-	.hw	= {
-		.clk	= &gpio0_dbclk_mux_ck,
-	},
-	.clkdm_name	= "l4_wkup_clkdm",
-	.clksel		= gpio0_dbclk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_GPIO0_DBCLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(gpio0_dbclk_mux_ck, gpio0_ck_parents, gpio_fck_ops);
-
-DEFINE_CLK_GATE(gpio0_dbclk, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, 0x0,
-		AM33XX_CM_WKUP_GPIO0_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio1_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO1_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio2_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO2_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio3_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO3_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT, 0x0, NULL);
-
-
-static const char *pruss_ck_parents[] = {
-	"l3_gclk", "dpll_disp_m2_ck",
-};
-
-static const struct clksel pruss_ocp_clk_mux_sel[] = {
-	{ .parent = &l3_gclk, .rates = div_1_0_rates },
-	{ .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pruss_ocp_gclk;
-
-static struct clk_hw_omap pruss_ocp_gclk_hw = {
-	.hw	= {
-		.clk	= &pruss_ocp_gclk,
-	},
-	.clkdm_name	= "pruss_ocp_clkdm",
-	.clksel		= pruss_ocp_clk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_PRUSS_OCP_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_0_MASK,
-};
-
-DEFINE_STRUCT_CLK(pruss_ocp_gclk, pruss_ck_parents, gpio_fck_ops);
-
-static const char *lcd_ck_parents[] = {
-	"dpll_disp_m2_ck", "dpll_core_m5_ck", "dpll_per_m2_ck",
-};
-
-static const struct clksel lcd_clk_mux_sel[] = {
-	{ .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m5_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk lcd_gclk;
-
-static struct clk_hw_omap lcd_gclk_hw = {
-	.hw	= {
-		.clk	= &lcd_gclk,
-	},
-	.clkdm_name	= "lcdc_clkdm",
-	.clksel		= lcd_clk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_LCDC_PIXEL_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK_FLAGS(lcd_gclk, lcd_ck_parents,
-			gpio_fck_ops, CLK_SET_RATE_PARENT);
-
-DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2);
-
-static const char *gfx_ck_parents[] = {
-	"dpll_core_m4_ck", "dpll_per_m2_ck",
-};
-
-static const struct clksel gfx_clksel_sel[] = {
-	{ .parent = &dpll_core_m4_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gfx_fclk_clksel_ck;
-
-static struct clk_hw_omap gfx_fclk_clksel_ck_hw = {
-	.hw	= {
-		.clk	= &gfx_fclk_clksel_ck,
-	},
-	.clksel		= gfx_clksel_sel,
-	.clksel_reg	= AM33XX_CLKSEL_GFX_FCLK,
-	.clksel_mask	= AM33XX_CLKSEL_GFX_FCLK_MASK,
-};
-
-DEFINE_STRUCT_CLK(gfx_fclk_clksel_ck, gfx_ck_parents, gpio_fck_ops);
-
-static const struct clk_div_table div_1_0_2_1_rates[] = {
-	{ .div = 1, .val = 0, },
-	{ .div = 2, .val = 1, },
-	{ .div = 0 },
-};
-
-DEFINE_CLK_DIVIDER_TABLE(gfx_fck_div_ck, "gfx_fclk_clksel_ck",
-			 &gfx_fclk_clksel_ck, 0x0, AM33XX_CLKSEL_GFX_FCLK,
-			 AM33XX_CLKSEL_0_0_SHIFT, AM33XX_CLKSEL_0_0_WIDTH,
-			 0x0, div_1_0_2_1_rates, NULL);
-
-static const char *sysclkout_ck_parents[] = {
-	"clk_32768_ck", "l3_gclk", "dpll_ddr_m2_ck", "dpll_per_m2_ck",
-	"lcd_gclk",
-};
-
-static const struct clksel sysclkout_pre_sel[] = {
-	{ .parent = &clk_32768_ck, .rates = div_1_0_rates },
-	{ .parent = &l3_gclk, .rates = div_1_1_rates },
-	{ .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_3_rates },
-	{ .parent = &lcd_gclk, .rates = div_1_4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sysclkout_pre_ck;
-
-static struct clk_hw_omap sysclkout_pre_ck_hw = {
-	.hw	= {
-		.clk	= &sysclkout_pre_ck,
-	},
-	.clksel		= sysclkout_pre_sel,
-	.clksel_reg	= AM33XX_CM_CLKOUT_CTRL,
-	.clksel_mask	= AM33XX_CLKOUT2SOURCE_MASK,
-};
-
-DEFINE_STRUCT_CLK(sysclkout_pre_ck, sysclkout_ck_parents, gpio_fck_ops);
-
-/* Divide by 8 clock rates with default clock is 1/1*/
-static const struct clk_div_table div8_rates[] = {
-	{ .div = 1, .val = 0, },
-	{ .div = 2, .val = 1, },
-	{ .div = 3, .val = 2, },
-	{ .div = 4, .val = 3, },
-	{ .div = 5, .val = 4, },
-	{ .div = 6, .val = 5, },
-	{ .div = 7, .val = 6, },
-	{ .div = 8, .val = 7, },
-	{ .div = 0 },
-};
-
-DEFINE_CLK_DIVIDER_TABLE(clkout2_div_ck, "sysclkout_pre_ck", &sysclkout_pre_ck,
-			 0x0, AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2DIV_SHIFT,
-			 AM33XX_CLKOUT2DIV_WIDTH, 0x0, div8_rates, NULL);
-
-DEFINE_CLK_GATE(clkout2_ck, "clkout2_div_ck", &clkout2_div_ck, 0x0,
-		AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2EN_SHIFT, 0x0, NULL);
-
-static const char *wdt_ck_parents[] = {
-	"clk_rc32k_ck", "clkdiv32k_ick",
-};
-
-static const struct clksel wdt_clkmux_sel[] = {
-	{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk wdt1_fck;
-
-static struct clk_hw_omap wdt1_fck_hw = {
-	.hw	= {
-		.clk	= &wdt1_fck,
-	},
-	.clkdm_name	= "l4_wkup_clkdm",
-	.clksel		= wdt_clkmux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_WDT1_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops);
-
-static const char *pwmss_clk_parents[] = {
-	"dpll_per_m2_ck",
-};
-
-static const struct clk_ops ehrpwm_tbclk_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm0_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS0_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm1_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS1_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm2_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS2_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-/*
- * debugss optional clocks
- */
-DEFINE_CLK_GATE(dbg_sysclk_ck, "sys_clkin_ck", &sys_clkin_ck,
-		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dbg_clka_ck, "dpll_core_m4_ck", &dpll_core_m4_ck,
-		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		AM33XX_OPTCLK_DEBUG_CLKA_SHIFT, 0x0, NULL);
-
-static const char *stm_pmd_clock_mux_ck_parents[] = {
-	"dbg_sysclk_ck", "dbg_clka_ck",
-};
-
-DEFINE_CLK_MUX(stm_pmd_clock_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
-	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_STM_PMD_CLKSEL_SHIFT,
-	       AM33XX_STM_PMD_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(trace_pmd_clk_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
-	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-	       AM33XX_TRC_PMD_CLKSEL_SHIFT,
-	       AM33XX_TRC_PMD_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(stm_clk_div_ck, "stm_pmd_clock_mux_ck",
-		   &stm_pmd_clock_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		   AM33XX_STM_PMD_CLKDIVSEL_SHIFT,
-		   AM33XX_STM_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-DEFINE_CLK_DIVIDER(trace_clk_div_ck, "trace_pmd_clk_mux_ck",
-		   &trace_pmd_clk_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		   AM33XX_TRC_PMD_CLKDIVSEL_SHIFT,
-		   AM33XX_TRC_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-/*
- * clkdev
- */
-static struct omap_clk am33xx_clks[] = {
-	CLK(NULL,	"clk_32768_ck",		&clk_32768_ck),
-	CLK(NULL,	"clk_rc32k_ck",		&clk_rc32k_ck),
-	CLK(NULL,	"virt_19200000_ck",	&virt_19200000_ck),
-	CLK(NULL,	"virt_24000000_ck",	&virt_24000000_ck),
-	CLK(NULL,	"virt_25000000_ck",	&virt_25000000_ck),
-	CLK(NULL,	"virt_26000000_ck",	&virt_26000000_ck),
-	CLK(NULL,	"sys_clkin_ck",		&sys_clkin_ck),
-	CLK(NULL,	"tclkin_ck",		&tclkin_ck),
-	CLK(NULL,	"dpll_core_ck",		&dpll_core_ck),
-	CLK(NULL,	"dpll_core_x2_ck",	&dpll_core_x2_ck),
-	CLK(NULL,	"dpll_core_m4_ck",	&dpll_core_m4_ck),
-	CLK(NULL,	"dpll_core_m5_ck",	&dpll_core_m5_ck),
-	CLK(NULL,	"dpll_core_m6_ck",	&dpll_core_m6_ck),
-	CLK(NULL,	"dpll_mpu_ck",		&dpll_mpu_ck),
-	CLK("cpu0",	NULL,			&dpll_mpu_ck),
-	CLK(NULL,	"dpll_mpu_m2_ck",	&dpll_mpu_m2_ck),
-	CLK(NULL,	"dpll_ddr_ck",		&dpll_ddr_ck),
-	CLK(NULL,	"dpll_ddr_m2_ck",	&dpll_ddr_m2_ck),
-	CLK(NULL,	"dpll_ddr_m2_div2_ck",	&dpll_ddr_m2_div2_ck),
-	CLK(NULL,	"dpll_disp_ck",		&dpll_disp_ck),
-	CLK(NULL,	"dpll_disp_m2_ck",	&dpll_disp_m2_ck),
-	CLK(NULL,	"dpll_per_ck",		&dpll_per_ck),
-	CLK(NULL,	"dpll_per_m2_ck",	&dpll_per_m2_ck),
-	CLK(NULL,	"dpll_per_m2_div4_wkupdm_ck",	&dpll_per_m2_div4_wkupdm_ck),
-	CLK(NULL,	"dpll_per_m2_div4_ck",	&dpll_per_m2_div4_ck),
-	CLK(NULL,	"adc_tsc_fck",		&adc_tsc_fck),
-	CLK(NULL,	"cefuse_fck",		&cefuse_fck),
-	CLK(NULL,	"clkdiv32k_ck",		&clkdiv32k_ck),
-	CLK(NULL,	"clkdiv32k_ick",	&clkdiv32k_ick),
-	CLK(NULL,	"dcan0_fck",		&dcan0_fck),
-	CLK("481cc000.d_can",	NULL,		&dcan0_fck),
-	CLK(NULL,	"dcan1_fck",		&dcan1_fck),
-	CLK("481d0000.d_can",	NULL,		&dcan1_fck),
-	CLK(NULL,	"pruss_ocp_gclk",	&pruss_ocp_gclk),
-	CLK(NULL,	"mcasp0_fck",		&mcasp0_fck),
-	CLK(NULL,	"mcasp1_fck",		&mcasp1_fck),
-	CLK(NULL,	"mmu_fck",		&mmu_fck),
-	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck),
-	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck),
-	CLK(NULL,	"sha0_fck",		&sha0_fck),
-	CLK(NULL,	"aes0_fck",		&aes0_fck),
-	CLK(NULL,	"rng_fck",		&rng_fck),
-	CLK(NULL,	"timer1_fck",		&timer1_fck),
-	CLK(NULL,	"timer2_fck",		&timer2_fck),
-	CLK(NULL,	"timer3_fck",		&timer3_fck),
-	CLK(NULL,	"timer4_fck",		&timer4_fck),
-	CLK(NULL,	"timer5_fck",		&timer5_fck),
-	CLK(NULL,	"timer6_fck",		&timer6_fck),
-	CLK(NULL,	"timer7_fck",		&timer7_fck),
-	CLK(NULL,	"usbotg_fck",		&usbotg_fck),
-	CLK(NULL,	"ieee5000_fck",		&ieee5000_fck),
-	CLK(NULL,	"wdt1_fck",		&wdt1_fck),
-	CLK(NULL,	"l4_rtc_gclk",		&l4_rtc_gclk),
-	CLK(NULL,	"l3_gclk",		&l3_gclk),
-	CLK(NULL,	"dpll_core_m4_div2_ck",	&dpll_core_m4_div2_ck),
-	CLK(NULL,	"l4hs_gclk",		&l4hs_gclk),
-	CLK(NULL,	"l3s_gclk",		&l3s_gclk),
-	CLK(NULL,	"l4fw_gclk",		&l4fw_gclk),
-	CLK(NULL,	"l4ls_gclk",		&l4ls_gclk),
-	CLK(NULL,	"clk_24mhz",		&clk_24mhz),
-	CLK(NULL,	"sysclk_div_ck",	&sysclk_div_ck),
-	CLK(NULL,	"cpsw_125mhz_gclk",	&cpsw_125mhz_gclk),
-	CLK(NULL,	"cpsw_cpts_rft_clk",	&cpsw_cpts_rft_clk),
-	CLK(NULL,	"gpio0_dbclk_mux_ck",	&gpio0_dbclk_mux_ck),
-	CLK(NULL,	"gpio0_dbclk",		&gpio0_dbclk),
-	CLK(NULL,	"gpio1_dbclk",		&gpio1_dbclk),
-	CLK(NULL,	"gpio2_dbclk",		&gpio2_dbclk),
-	CLK(NULL,	"gpio3_dbclk",		&gpio3_dbclk),
-	CLK(NULL,	"lcd_gclk",		&lcd_gclk),
-	CLK(NULL,	"mmc_clk",		&mmc_clk),
-	CLK(NULL,	"gfx_fclk_clksel_ck",	&gfx_fclk_clksel_ck),
-	CLK(NULL,	"gfx_fck_div_ck",	&gfx_fck_div_ck),
-	CLK(NULL,	"sysclkout_pre_ck",	&sysclkout_pre_ck),
-	CLK(NULL,	"clkout2_div_ck",	&clkout2_div_ck),
-	CLK(NULL,	"timer_32k_ck",		&clkdiv32k_ick),
-	CLK(NULL,	"timer_sys_ck",		&sys_clkin_ck),
-	CLK(NULL,	"dbg_sysclk_ck",	&dbg_sysclk_ck),
-	CLK(NULL,	"dbg_clka_ck",		&dbg_clka_ck),
-	CLK(NULL,	"stm_pmd_clock_mux_ck",	&stm_pmd_clock_mux_ck),
-	CLK(NULL,	"trace_pmd_clk_mux_ck",	&trace_pmd_clk_mux_ck),
-	CLK(NULL,	"stm_clk_div_ck",	&stm_clk_div_ck),
-	CLK(NULL,	"trace_clk_div_ck",	&trace_clk_div_ck),
-	CLK(NULL,	"clkout2_ck",		&clkout2_ck),
-	CLK("48300200.ehrpwm",	"tbclk",	&ehrpwm0_tbclk),
-	CLK("48302200.ehrpwm",	"tbclk",	&ehrpwm1_tbclk),
-	CLK("48304200.ehrpwm",	"tbclk",	&ehrpwm2_tbclk),
-};
-
-
-static const char *enable_init_clks[] = {
-	"dpll_ddr_m2_ck",
-	"dpll_mpu_m2_ck",
-	"l3_gclk",
-	"l4hs_gclk",
-	"l4fw_gclk",
-	"l4ls_gclk",
-	"clkout2_ck",	/* Required for external peripherals like, Audio codecs */
-};
-
-int __init am33xx_clk_init(void)
-{
-	if (soc_is_am33xx())
-		cpu_mask = RATE_IN_AM33XX;
-
-	omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks));
-
-	omap2_clk_disable_autoidle_all();
-
-	omap2_clk_enable_init_clocks(enable_init_clks,
-				     ARRAY_SIZE(enable_init_clks));
-
-	/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
-	 *    physically present, in such a case HWMOD enabling of
-	 *    clock would be failure with default parent. And timer
-	 *    probe thinks clock is already enabled, this leads to
-	 *    crash upon accessing timer 3 & 6 registers in probe.
-	 *    Fix by setting parent of both these timers to master
-	 *    oscillator clock.
-	 */
-
-	clk_set_parent(&timer3_fck, &sys_clkin_ck);
-	clk_set_parent(&timer6_fck, &sys_clkin_ck);
-	/*
-	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
-	 * the design/spec, so as a result, for example, timer which supposed
-	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
-	 * not expected by any use-case, so change WDT1 clock source to PRCM
-	 * 32KHz clock.
-	 */
-	clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2e0f0fe..0937e50 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -581,7 +581,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = am33xx_clk_init;
+	omap_clk_soc_init = am33xx_dt_clk_init;
 }
 
 void __init am33xx_init_late(void)
-- 
1.7.9.5

[PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available

[Tero Kristo]

OMAP3 platforms support both DT and non-DT boot at the moment, make
the clock init work according to the used setup.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/io.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 0937e50..05cdff3 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -488,21 +488,29 @@ void __init omap3_init_early(void)
 void __init omap3430_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
 void __init omap35xx_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
 void __init omap3630_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3630_dt_clk_init;
 }
 
 void __init am35xx_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = am35xx_dt_clk_init;
 }
 
 void __init ti81xx_init_early(void)
@@ -520,7 +528,10 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = omap3xxx_clk_init;
+	if (of_have_populated_dt())
+		omap_clk_soc_init = ti81xx_dt_clk_init;
+	else
+		omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
-- 
1.7.9.5

[PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available

[Tero Kristo]

OMAP3 platforms support both DT and non-DT boot at the moment, make
the clock init work according to the used setup.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/io.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 0937e50..05cdff3 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -488,21 +488,29 @@ void __init omap3_init_early(void)
 void __init omap3430_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
 void __init omap35xx_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
 void __init omap3630_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3630_dt_clk_init;
 }
 
 void __init am35xx_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = am35xx_dt_clk_init;
 }
 
 void __init ti81xx_init_early(void)
@@ -520,7 +528,10 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = omap3xxx_clk_init;
+	if (of_have_populated_dt())
+		omap_clk_soc_init = ti81xx_dt_clk_init;
+	else
+		omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
-- 
1.7.9.5

Re: [PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [131126 00:10]:
> OMAP3 platforms support both DT and non-DT boot at the moment, make
> the clock init work according to the used setup.

We're making omap3 to be DT only as well, so it might make sense to
drop the omap3 clock data as well while at it. Or do it later to
avoid adding dependencies, up to you.

Regards,

Tony

[PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [131126 00:10]:
> OMAP3 platforms support both DT and non-DT boot at the moment, make
> the clock init work according to the used setup.

We're making omap3 to be DT only as well, so it might make sense to
drop the omap3 clock data as well while at it. Or do it later to
avoid adding dependencies, up to you.

Regards,

Tony

Re: [PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available

[Tero Kristo]

On 11/26/2013 07:44 PM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [131126 00:10]:
>> OMAP3 platforms support both DT and non-DT boot at the moment, make
>> the clock init work according to the used setup.
>
> We're making omap3 to be DT only as well, so it might make sense to
> drop the omap3 clock data as well while at it. Or do it later to
> avoid adding dependencies, up to you.

Ok, I can remove it with next rev if you like.

-Tero

[PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available

[Tero Kristo]

On 11/26/2013 07:44 PM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [131126 00:10]:
>> OMAP3 platforms support both DT and non-DT boot at the moment, make
>> the clock init work according to the used setup.
>
> We're making omap3 to be DT only as well, so it might make sense to
> drop the omap3 clock data as well while at it. Or do it later to
> avoid adding dependencies, up to you.

Ok, I can remove it with next rev if you like.

-Tero

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [131126 00:09]:
> Hi,
> 
> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level
> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume
> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)

FYI, I noticed you still have few hack pathces in this branch that you
should drop before it's pullable.

You can drop "HACK: force enable uart3 rx iochain wakeup" and replace it
with "ARM: dts: Fix omap serial wake-up when booted with device tree" I
posted few days ago. You may also want to use the latest attempt of patch
"of/platform: Fix no irq domain found errors when populating interrupts"
to avoid some new warnings. That way you can test off-idle on omap3 with
DT, but it's best to keep those out of your branch.

Then the "HACK: Makefile: Build a uImage with dtb already appended" you
can just replace with a shell script to leave that one out :)

> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit

I pulled these on top of my patches to make mach-omap2 boot in DT only
mode, and there's just a trivial merge conflict with the DT data which
is no problem.

And looks like off-idle keeps working for me on omap3 :) So for the
patches that don't have it yet, please feel free to add:

Acked-by: Tony Lindgren <tony@atomide.com>

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [131126 00:09]:
> Hi,
> 
> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level
> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume
> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)

FYI, I noticed you still have few hack pathces in this branch that you
should drop before it's pullable.

You can drop "HACK: force enable uart3 rx iochain wakeup" and replace it
with "ARM: dts: Fix omap serial wake-up when booted with device tree" I
posted few days ago. You may also want to use the latest attempt of patch
"of/platform: Fix no irq domain found errors when populating interrupts"
to avoid some new warnings. That way you can test off-idle on omap3 with
DT, but it's best to keep those out of your branch.

Then the "HACK: Makefile: Build a uImage with dtb already appended" you
can just replace with a shell script to leave that one out :)

> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit

I pulled these on top of my patches to make mach-omap2 boot in DT only
mode, and there's just a trivial merge conflict with the DT data which
is no problem.

And looks like off-idle keeps working for me on omap3 :) So for the
patches that don't have it yet, please feel free to add:

Acked-by: Tony Lindgren <tony@atomide.com>

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Mike Turquette]

Quoting Tero Kristo (2013-11-26 00:05:41)
> Hi,
> 
> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level
> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume

A quick note in testing: trace_clk_div_ck ends up as an orphan clock on
my Panda ES.

Regards,
Mike

> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit
> 
> -Tero
> 

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Mike Turquette]

Quoting Tero Kristo (2013-11-26 00:05:41)
> Hi,
> 
> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level
> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume

A quick note in testing: trace_clk_div_ck ends up as an orphan clock on
my Panda ES.

Regards,
Mike

> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit
> 
> -Tero
> 

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Mike Turquette]

Quoting Tero Kristo (2013-11-26 00:05:41)
> Hi,
> 

Hi Tero,

Thanks for your long suffering patience on this series. The clock
patches look very good to me with exception of a few small comments. Let
me know how I can help with the hierarchal DT stuff since I think that
has been the gating factor for this series for the past few revisions.

> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level

Regarding regmap, will that be dropped for V11? I don't care whether it
stays or goes but the approach you took is probably too top-level. Patch
#1 sets clk_reg_ops system-wide which probably isn't right. Different
clock drivers might compete to set those ops and the last one to write
wins.

A better approach is to support regmap ops on a per-clock basis (for
clocks that use the generic implementations like clk-divider and
clk-gate; obviously this is overkill for entirely hardware-specific
clocks). Stephen Boyd's approach is a better solution[1][2] but
unfortunately that approach dumps crap into struct clk_hw which is bad.

Anyways if you decide against regmap for V11 then the whole issue is
avoided.

Regards,
Mike

[1] http://article.gmane.org/gmane.linux.ports.arm.kernel/273742
[2] http://article.gmane.org/gmane.linux.ports.arm.kernel/273744

> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume
> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit
> 
> -Tero
> 

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Mike Turquette]

Quoting Tero Kristo (2013-11-26 00:05:41)
> Hi,
> 

Hi Tero,

Thanks for your long suffering patience on this series. The clock
patches look very good to me with exception of a few small comments. Let
me know how I can help with the hierarchal DT stuff since I think that
has been the gating factor for this series for the past few revisions.

> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level

Regarding regmap, will that be dropped for V11? I don't care whether it
stays or goes but the approach you took is probably too top-level. Patch
#1 sets clk_reg_ops system-wide which probably isn't right. Different
clock drivers might compete to set those ops and the last one to write
wins.

A better approach is to support regmap ops on a per-clock basis (for
clocks that use the generic implementations like clk-divider and
clk-gate; obviously this is overkill for entirely hardware-specific
clocks). Stephen Boyd's approach is a better solution[1][2] but
unfortunately that approach dumps crap into struct clk_hw which is bad.

Anyways if you decide against regmap for V11 then the whole issue is
avoided.

Regards,
Mike

[1] http://article.gmane.org/gmane.linux.ports.arm.kernel/273742
[2] http://article.gmane.org/gmane.linux.ports.arm.kernel/273744

> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume
> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit
> 
> -Tero
> 

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tero Kristo]

On 12/15/2013 06:35 AM, Mike Turquette wrote:
> Quoting Tero Kristo (2013-11-26 00:05:41)
>> Hi,
>>
>
> Hi Tero,
>
> Thanks for your long suffering patience on this series. The clock
> patches look very good to me with exception of a few small comments. Let
> me know how I can help with the hierarchal DT stuff since I think that
> has been the gating factor for this series for the past few revisions.
>
>> Changes compared to v9:
>> - rebased on top of 3.13-rc1
>> - modified the low level clk register API to provide SoC specific clk_readl
>>    and clk_writel support which can be registered during boot, TI SoC variant
>>    uses regmap on low level
>
> Regarding regmap, will that be dropped for V11? I don't care whether it
> stays or goes but the approach you took is probably too top-level. Patch
> #1 sets clk_reg_ops system-wide which probably isn't right. Different
> clock drivers might compete to set those ops and the last one to write
> wins.

I will be dropping regmap for v11. However...

>
> A better approach is to support regmap ops on a per-clock basis (for
> clocks that use the generic implementations like clk-divider and
> clk-gate; obviously this is overkill for entirely hardware-specific
> clocks). Stephen Boyd's approach is a better solution[1][2] but
> unfortunately that approach dumps crap into struct clk_hw which is bad.
>
> Anyways if you decide against regmap for V11 then the whole issue is
> avoided.

Not avoided, some sort of solution is still needed to wrap the register 
reads/writes. Alternatives are basically top level clk_ops or some stuff 
like the patches you referred to, however it needs to be expanded to 
support also the basic clock types.

-Tero

>
> Regards,
> Mike
>
> [1] http://article.gmane.org/gmane.linux.ports.arm.kernel/273742
> [2] http://article.gmane.org/gmane.linux.ports.arm.kernel/273744
>
>> - dropped regmap parameter from clock init calls, instead a helper is used
>>    for getting regmap index along with the register offset from DT
>> - dropped regmap parameter from clock structs, instead platform specific
>>    clk_readl / clk_writel are used to parse reg parameter according to
>>    platform, for TI SoC:s, this is encoded as:
>>    struct clk_omap_reg {
>>      u16 offset; /* register offset */
>>      u16 index; /* regmap index */
>>    }
>> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>>    tweak which I would actually want some feedback upon, basically the problem
>>    is I need to return status from the clk init functions so I can see if
>>    -EAGAIN is passed, in which case init will be retried later, maybe some of
>>    this can be made generic, like converting all the CLK_OF_DECLARE type
>>    functions to return status
>>
>> Testing done:
>> - omap3-beagle : boot + suspend/resume
>> - omap3-beagle-xm : boot (thanks to Nishanth)
>> - omap4-panda-es : boot + suspend/resume
>> - omap5-uevm : boot
>> - dra7-evm : boot
>> - am335x-bone : boot
>>
>> Separate branches available at https://github.com/t-kristo/linux-pm.git
>>
>> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
>> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
>> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit
>>
>> -Tero
>>

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Tero Kristo]

On 12/15/2013 06:35 AM, Mike Turquette wrote:
> Quoting Tero Kristo (2013-11-26 00:05:41)
>> Hi,
>>
>
> Hi Tero,
>
> Thanks for your long suffering patience on this series. The clock
> patches look very good to me with exception of a few small comments. Let
> me know how I can help with the hierarchal DT stuff since I think that
> has been the gating factor for this series for the past few revisions.
>
>> Changes compared to v9:
>> - rebased on top of 3.13-rc1
>> - modified the low level clk register API to provide SoC specific clk_readl
>>    and clk_writel support which can be registered during boot, TI SoC variant
>>    uses regmap on low level
>
> Regarding regmap, will that be dropped for V11? I don't care whether it
> stays or goes but the approach you took is probably too top-level. Patch
> #1 sets clk_reg_ops system-wide which probably isn't right. Different
> clock drivers might compete to set those ops and the last one to write
> wins.

I will be dropping regmap for v11. However...

>
> A better approach is to support regmap ops on a per-clock basis (for
> clocks that use the generic implementations like clk-divider and
> clk-gate; obviously this is overkill for entirely hardware-specific
> clocks). Stephen Boyd's approach is a better solution[1][2] but
> unfortunately that approach dumps crap into struct clk_hw which is bad.
>
> Anyways if you decide against regmap for V11 then the whole issue is
> avoided.

Not avoided, some sort of solution is still needed to wrap the register 
reads/writes. Alternatives are basically top level clk_ops or some stuff 
like the patches you referred to, however it needs to be expanded to 
support also the basic clock types.

-Tero

>
> Regards,
> Mike
>
> [1] http://article.gmane.org/gmane.linux.ports.arm.kernel/273742
> [2] http://article.gmane.org/gmane.linux.ports.arm.kernel/273744
>
>> - dropped regmap parameter from clock init calls, instead a helper is used
>>    for getting regmap index along with the register offset from DT
>> - dropped regmap parameter from clock structs, instead platform specific
>>    clk_readl / clk_writel are used to parse reg parameter according to
>>    platform, for TI SoC:s, this is encoded as:
>>    struct clk_omap_reg {
>>      u16 offset; /* register offset */
>>      u16 index; /* regmap index */
>>    }
>> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>>    tweak which I would actually want some feedback upon, basically the problem
>>    is I need to return status from the clk init functions so I can see if
>>    -EAGAIN is passed, in which case init will be retried later, maybe some of
>>    this can be made generic, like converting all the CLK_OF_DECLARE type
>>    functions to return status
>>
>> Testing done:
>> - omap3-beagle : boot + suspend/resume
>> - omap3-beagle-xm : boot (thanks to Nishanth)
>> - omap4-panda-es : boot + suspend/resume
>> - omap5-uevm : boot
>> - dra7-evm : boot
>> - am335x-bone : boot
>>
>> Separate branches available at https://github.com/t-kristo/linux-pm.git
>>
>> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
>> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
>> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit
>>
>> -Tero
>>

Re: [PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 2438 bytes --]

Hi,

On Tue, Nov 26, 2013 at 10:05:41AM +0200, Tero Kristo wrote:
> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level
> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume
> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit

OMAP5-only configuration doesn't build. Attached .config

Below patch fixed it for me, but I'm not sure if it's the right fix:

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 088305f..1a627c6 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,7 +189,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common) clkt_iclk.o
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)

-- 
balbi

[-- Attachment #1.2: .config --]
[-- Type: text/plain, Size: 57411 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.13.0-rc4 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_FHANDLE is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MXC is not set

#
# TI OMAP Common Features
#

#
# OMAP Feature Selections
#
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_OMAP2 is not set
# CONFIG_ARCH_OMAP3 is not set
# CONFIG_ARCH_OMAP4 is not set
CONFIG_SOC_OMAP5=y
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
CONFIG_ARCH_OMAP2PLUS=y

#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_HAS_REALTIME_COUNTER=y
# CONFIG_SOC_DRA7XX is not set

#
# OMAP Legacy Platform Data Board Type
#
# CONFIG_ARCH_PICOXCELL is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_WM8750 is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V6=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y

#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_326103 is not set
CONFIG_ARM_ERRATA_411920=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_643719 is not set
CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ERRATA_754322=y
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_364296 is not set
# CONFIG_ARM_ERRATA_764369 is not set
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_798181=y
# CONFIG_ARM_ERRATA_773022 is not set
CONFIG_TI_PRIV_EDMA=y

#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
# CONFIG_MCPM is not set
# CONFIG_BIG_LITTLE is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=512
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_ZBUD is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y

#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_NET is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7

#
# Bus devices
#
CONFIG_OMAP_OCP2SCP=y
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_ARM_CCI is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_MTD=y
# CONFIG_PARPORT is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MG_DISK is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
CONFIG_HW_RANDOM_OMAP=y
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_PALMAS is not set
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_PALMAS is not set
# CONFIG_GPIO_TPS65910 is not set
# CONFIG_GPIO_BCM_KONA is not set

#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
CONFIG_TWL4030_POWER=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_TEGRA_HOST1X is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_OMAP2_DSS=m
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_OMAP2_DSS_DEBUGFS is not set
CONFIG_OMAP2_DSS_DPI=y
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
CONFIG_FB_OMAP2=m
CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
CONFIG_FB_OMAP2_NUM_FBS=3

#
# OMAP Display Device Drivers (new device model)
#
CONFIG_DISPLAY_ENCODER_TFP410=m
CONFIG_DISPLAY_ENCODER_TPD12S015=m
CONFIG_DISPLAY_CONNECTOR_DVI=m
CONFIG_DISPLAY_CONNECTOR_HDMI=m
# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
CONFIG_DISPLAY_PANEL_DPI=m
# CONFIG_DISPLAY_PANEL_DSI_CM is not set
# CONFIG_DISPLAY_PANEL_SONY_ACX565AKM is not set
# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_TPS65217 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_FB_SSD1307 is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_GADGET=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=m
# CONFIG_USB_DWC3_EXYNOS is not set
# CONFIG_USB_DWC3_KEYSTONE is not set

#
# Debugging features
#
CONFIG_USB_DWC3_DEBUG=y
CONFIG_USB_DWC3_VERBOSE=y
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_USB_OTG_FSM is not set
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_CONTROL_USB=y
CONFIG_OMAP_USB3=y
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
CONFIG_USB_ZERO=m
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PALMAS is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_MOXART is not set

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
# CONFIG_TI_CPPI41 is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_CLK_TWL6040 is not set

#
# Hardware Spinlock drivers
#
# CONFIG_HWSPINLOCK_OMAP is not set
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_OF_EXTCON=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_PALMAS=y
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_OMAP_USB2=y
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_POWERCAP is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
CONFIG_OLD_MCOUNT=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_UART_8250 is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_ARM_KPROBES_TEST is not set
# CONFIG_PID_IN_CONTEXTIDR is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_VIRTUALIZATION is not set

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCHv10 00/41] ARM: TI SoC clock DT conversion

[Felipe Balbi]

Hi,

On Tue, Nov 26, 2013 at 10:05:41AM +0200, Tero Kristo wrote:
> Changes compared to v9:
> - rebased on top of 3.13-rc1
> - modified the low level clk register API to provide SoC specific clk_readl
>   and clk_writel support which can be registered during boot, TI SoC variant
>   uses regmap on low level
> - dropped regmap parameter from clock init calls, instead a helper is used
>   for getting regmap index along with the register offset from DT
> - dropped regmap parameter from clock structs, instead platform specific
>   clk_readl / clk_writel are used to parse reg parameter according to
>   platform, for TI SoC:s, this is encoded as:
>   struct clk_omap_reg {
>     u16 offset; /* register offset */
>     u16 index; /* regmap index */
>   }
> - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE
>   tweak which I would actually want some feedback upon, basically the problem
>   is I need to return status from the clk init functions so I can see if
>   -EAGAIN is passed, in which case init will be retried later, maybe some of
>   this can be made generic, like converting all the CLK_OF_DECLARE type
>   functions to return status
> 
> Testing done:
> - omap3-beagle : boot + suspend/resume
> - omap3-beagle-xm : boot (thanks to Nishanth)
> - omap4-panda-es : boot + suspend/resume
> - omap5-uevm : boot
> - dra7-evm : boot
> - am335x-bone : boot
> 
> Separate branches available at https://github.com/t-kristo/linux-pm.git
> 
> - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything)
> - clk driver only: 3.13-rc1-dt-clks-v10-for-mike
> - DT data only: 3.13-rc1-dt-clks-v10-for-benoit

OMAP5-only configuration doesn't build. Attached .config

Below patch fixed it for me, but I'm not sure if it's the right fix:

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 088305f..1a627c6 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,7 +189,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common) clkt_iclk.o
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)

-- 
balbi
-------------- next part --------------
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.13.0-rc4 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_FHANDLE is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MXC is not set

#
# TI OMAP Common Features
#

#
# OMAP Feature Selections
#
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_OMAP2 is not set
# CONFIG_ARCH_OMAP3 is not set
# CONFIG_ARCH_OMAP4 is not set
CONFIG_SOC_OMAP5=y
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
CONFIG_ARCH_OMAP2PLUS=y

#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_HAS_REALTIME_COUNTER=y
# CONFIG_SOC_DRA7XX is not set

#
# OMAP Legacy Platform Data Board Type
#
# CONFIG_ARCH_PICOXCELL is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_WM8750 is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V6=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y

#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_326103 is not set
CONFIG_ARM_ERRATA_411920=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_643719 is not set
CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ERRATA_754322=y
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_364296 is not set
# CONFIG_ARM_ERRATA_764369 is not set
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_798181=y
# CONFIG_ARM_ERRATA_773022 is not set
CONFIG_TI_PRIV_EDMA=y

#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
# CONFIG_MCPM is not set
# CONFIG_BIG_LITTLE is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=512
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_ZBUD is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y

#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_NET is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7

#
# Bus devices
#
CONFIG_OMAP_OCP2SCP=y
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_ARM_CCI is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_MTD=y
# CONFIG_PARPORT is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MG_DISK is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
CONFIG_HW_RANDOM_OMAP=y
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_PALMAS is not set
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_PALMAS is not set
# CONFIG_GPIO_TPS65910 is not set
# CONFIG_GPIO_BCM_KONA is not set

#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
CONFIG_TWL4030_POWER=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_TEGRA_HOST1X is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_OMAP2_DSS=m
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_OMAP2_DSS_DEBUGFS is not set
CONFIG_OMAP2_DSS_DPI=y
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
CONFIG_FB_OMAP2=m
CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
CONFIG_FB_OMAP2_NUM_FBS=3

#
# OMAP Display Device Drivers (new device model)
#
CONFIG_DISPLAY_ENCODER_TFP410=m
CONFIG_DISPLAY_ENCODER_TPD12S015=m
CONFIG_DISPLAY_CONNECTOR_DVI=m
CONFIG_DISPLAY_CONNECTOR_HDMI=m
# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
CONFIG_DISPLAY_PANEL_DPI=m
# CONFIG_DISPLAY_PANEL_DSI_CM is not set
# CONFIG_DISPLAY_PANEL_SONY_ACX565AKM is not set
# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_TPS65217 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_FB_SSD1307 is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_GADGET=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=m
# CONFIG_USB_DWC3_EXYNOS is not set
# CONFIG_USB_DWC3_KEYSTONE is not set

#
# Debugging features
#
CONFIG_USB_DWC3_DEBUG=y
CONFIG_USB_DWC3_VERBOSE=y
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_USB_OTG_FSM is not set
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_CONTROL_USB=y
CONFIG_OMAP_USB3=y
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
CONFIG_USB_ZERO=m
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PALMAS is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_MOXART is not set

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
# CONFIG_TI_CPPI41 is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_CLK_TWL6040 is not set

#
# Hardware Spinlock drivers
#
# CONFIG_HWSPINLOCK_OMAP is not set
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_OF_EXTCON=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_PALMAS=y
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_OMAP_USB2=y
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_POWERCAP is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
CONFIG_OLD_MCOUNT=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_UART_8250 is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_ARM_KPROBES_TEST is not set
# CONFIG_PID_IN_CONTEXTIDR is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_VIRTUALIZATION is not set
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131220/7ed5f698/attachment-0001.sig>