[PATCH 4.19 00/53] 4.19.240-rc1 review

[PATCH 4.19 00/53] 4.19.240-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.240 release.
There are 53 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.240-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.240-rc1

Marek Vasut <marex@denx.de>
    Revert "net: micrel: fix KS8851_MLL Kconfig"

Duoming Zhou <duoming@zju.edu.cn>
    ax25: Fix UAF bugs in ax25 timers

Duoming Zhou <duoming@zju.edu.cn>
    ax25: Fix NULL pointer dereferences in ax25 timers

Duoming Zhou <duoming@zju.edu.cn>
    ax25: fix NPD bug in ax25_disconnect

Duoming Zhou <duoming@zju.edu.cn>
    ax25: fix UAF bug in ax25_send_control()

Duoming Zhou <duoming@zju.edu.cn>
    ax25: Fix refcount leaks caused by ax25_cb_del()

Duoming Zhou <duoming@zju.edu.cn>
    ax25: fix UAF bugs of net_device caused by rebinding operation

Duoming Zhou <duoming@zju.edu.cn>
    ax25: fix reference count leaks of ax25_dev

Duoming Zhou <duoming@zju.edu.cn>
    ax25: add refcount in ax25_dev to avoid UAF bugs

Khazhismel Kumykov <khazhy@google.com>
    block/compat_ioctl: fix range check in BLKGETSIZE

Lee Jones <lee.jones@linaro.org>
    staging: ion: Prevent incorrect reference counting behavour

Theodore Ts'o <tytso@mit.edu>
    ext4: force overhead calculation if the s_overhead_cluster makes no sense

Theodore Ts'o <tytso@mit.edu>
    ext4: fix overhead calculation to account for the reserved gdt blocks

Tadeusz Struk <tadeusz.struk@linaro.org>
    ext4: limit length to bitmap_maxbytes - blocksize in punch_hole

Ye Bin <yebin10@huawei.com>
    ext4: fix symlink file size not match to file content

Rob Herring <robh@kernel.org>
    arm_pmu: Validate single/group leader events

Sergey Matyukevich <sergey.matyukevich@synopsys.com>
    ARC: entry: fix syscall_trace_exit argument

Sasha Neftin <sasha.neftin@intel.com>
    e1000e: Fix possible overflow in LTR decoding

Xiaomeng Tong <xiam0nd.tong@gmail.com>
    ASoC: soc-dapm: fix two incorrect uses of list iterator

Paolo Valerio <pvalerio@redhat.com>
    openvswitch: fix OOB access in reserve_sfa_size()

Athira Rajeev <atrajeev@linux.vnet.ibm.com>
    powerpc/perf: Fix power9 event alternatives

Dave Stevenson <dave.stevenson@raspberrypi.com>
    drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

Dave Stevenson <dave.stevenson@raspberrypi.com>
    drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

Xiaomeng Tong <xiam0nd.tong@gmail.com>
    dma: at_xdmac: fix a missing check on list iterator

Zheyu Ma <zheyuma97@gmail.com>
    ata: pata_marvell: Check the 'bmdma_addr' beforing reading

Mikulas Patocka <mpatocka@redhat.com>
    stat: fix inconsistency between struct stat and struct compat_stat

Tomas Melin <tomas.melin@vaisala.com>
    net: macb: Restart tx only if queue pointer is lagging

Xiaoke Wang <xkernel.wang@foxmail.com>
    drm/msm/mdp5: check the return of kzalloc()

Lv Ruyi <lv.ruyi@zte.com.cn>
    dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()

Borislav Petkov <bp@alien8.de>
    brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constant

Borislav Petkov <bp@suse.de>
    mt76: Fix undefined behavior due to shift overflowing the constant

David Howells <dhowells@redhat.com>
    cifs: Check the IOCB_DIRECT flag, not O_DIRECT

Hongbin Wang <wh_bin@126.com>
    vxlan: fix error return code in vxlan_fdb_append

Borislav Petkov <bp@suse.de>
    ALSA: usb-audio: Fix undefined behavior due to shift overflowing the constant

Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
    platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative

Sameer Pujar <spujar@nvidia.com>
    reset: tegra-bpmp: Restore Handle errors in BPMP response

Kees Cook <keescook@chromium.org>
    ARM: vexpress/spc: Avoid negative array index when !SMP

Eric Dumazet <edumazet@google.com>
    netlink: reset network and mac headers in netlink_dump()

Eric Dumazet <edumazet@google.com>
    net/sched: cls_u32: fix possible leak in u32_init_knode()

Hangbin Liu <liuhangbin@gmail.com>
    net/packet: fix packet_sock xmit return value checking

David Howells <dhowells@redhat.com>
    rxrpc: Restore removed timer deletion

Miaoqian Lin <linmq006@gmail.com>
    dmaengine: imx-sdma: Fix error checking in sdma_event_remap

Miaoqian Lin <linmq006@gmail.com>
    ASoC: msm8916-wcd-digital: Check failure for devm_snd_soc_register_component

Mark Brown <broonie@kernel.org>
    ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek

Kuniyuki Iwashima <kuniyu@amazon.co.jp>
    tcp: Fix potential use-after-free due to double kfree()

Ricardo Dias <rdias@singlestore.com>
    tcp: fix race condition when creating child sockets from syncookies

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Clear MIDI port active flag after draining

Bob Peterson <rpeterso@redhat.com>
    gfs2: assign rgrp glock before compute_bitstructs

Mikulas Patocka <mpatocka@redhat.com>
    dm integrity: fix memory corruption when tag_size is less than digest size

Hangyu Hua <hbh25y@gmail.com>
    can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path

Daniel Bristot de Oliveira <bristot@kernel.org>
    tracing: Dump stacktrace trigger to the corresponding instance

Xiongwei Song <sxwjean@gmail.com>
    mm: page_alloc: fix building error on -Werror=array-compare

Kees Cook <keescook@chromium.org>
    etherdevice: Adjust ether_addr* prototypes to silence -Wstringop-overead


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arc/kernel/entry.S                            |  1 +
 arch/arm/mach-vexpress/spc.c                       |  2 +-
 arch/powerpc/perf/power9-pmu.c                     |  8 +--
 arch/x86/include/asm/compat.h                      |  6 +-
 block/compat_ioctl.c                               |  2 +-
 drivers/ata/pata_marvell.c                         |  2 +
 drivers/dma/at_xdmac.c                             | 12 ++--
 drivers/dma/imx-sdma.c                             |  4 +-
 drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c         |  3 +
 .../gpu/drm/panel/panel-raspberrypi-touchscreen.c  | 13 ++++-
 drivers/md/dm-integrity.c                          |  7 ++-
 drivers/net/can/usb/usb_8dev.c                     | 30 +++++-----
 drivers/net/ethernet/cadence/macb_main.c           |  8 +++
 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c |  8 ++-
 drivers/net/ethernet/intel/e1000e/ich8lan.c        |  4 +-
 drivers/net/ethernet/micrel/Kconfig                |  1 -
 drivers/net/vxlan.c                                |  4 +-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |  2 +-
 drivers/net/wireless/mediatek/mt76/mt76x2_pci.c    |  2 +-
 drivers/perf/arm_pmu.c                             | 10 ++--
 drivers/platform/x86/samsung-laptop.c              |  2 -
 drivers/reset/tegra/reset-bpmp.c                   |  9 ++-
 drivers/staging/android/ion/ion.c                  |  3 +
 fs/cifs/cifsfs.c                                   |  2 +-
 fs/ext4/inode.c                                    | 11 +++-
 fs/ext4/page-io.c                                  |  4 +-
 fs/ext4/super.c                                    | 19 ++++--
 fs/gfs2/rgrp.c                                     |  9 +--
 fs/stat.c                                          | 19 +++---
 include/linux/etherdevice.h                        |  5 +-
 include/net/ax25.h                                 | 12 ++++
 include/net/inet_hashtables.h                      |  5 +-
 kernel/trace/trace_events_trigger.c                |  9 ++-
 mm/page_alloc.c                                    |  2 +-
 net/ax25/af_ax25.c                                 | 38 +++++++++---
 net/ax25/ax25_dev.c                                | 28 +++++++--
 net/ax25/ax25_route.c                              | 13 ++++-
 net/ax25/ax25_subr.c                               | 20 +++++--
 net/dccp/ipv4.c                                    |  2 +-
 net/dccp/ipv6.c                                    |  2 +-
 net/ipv4/inet_connection_sock.c                    |  2 +-
 net/ipv4/inet_hashtables.c                         | 68 +++++++++++++++++++---
 net/ipv4/tcp_ipv4.c                                | 13 ++++-
 net/ipv6/tcp_ipv6.c                                | 13 ++++-
 net/netlink/af_netlink.c                           |  7 +++
 net/openvswitch/flow_netlink.c                     |  2 +-
 net/packet/af_packet.c                             | 13 +++--
 net/rxrpc/net_ns.c                                 |  2 +
 net/sched/cls_u32.c                                |  8 +--
 sound/soc/atmel/sam9g20_wm8731.c                   | 61 -------------------
 sound/soc/codecs/msm8916-wcd-digital.c             |  9 ++-
 sound/soc/soc-dapm.c                               |  6 +-
 sound/usb/midi.c                                   |  1 +
 sound/usb/usbaudio.h                               |  2 +-
 55 files changed, 359 insertions(+), 195 deletions(-)

[PATCH 4.19 01/53] etherdevice: Adjust ether_addr* prototypes to silence -Wstringop-overead

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 2618a0dae09ef37728dab89ff60418cbe25ae6bd upstream.

With GCC 12, -Wstringop-overread was warning about an implicit cast from
char[6] to char[8]. However, the extra 2 bytes are always thrown away,
alignment doesn't matter, and the risk of hitting the edge of unallocated
memory has been accepted, so this prototype can just be converted to a
regular char *. Silences:

net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread]
 4618 |         orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr);
      |                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’
  375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
      |                    ^~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/netdev/20220212090811.uuzk6d76agw2vv73@pengutronix.de
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/etherdevice.h |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -130,7 +130,7 @@ static inline bool is_multicast_ether_ad
 #endif
 }
 
-static inline bool is_multicast_ether_addr_64bits(const u8 addr[6+2])
+static inline bool is_multicast_ether_addr_64bits(const u8 *addr)
 {
 #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
 #ifdef __BIG_ENDIAN
@@ -344,8 +344,7 @@ static inline bool ether_addr_equal(cons
  * Please note that alignment of addr1 & addr2 are only guaranteed to be 16 bits.
  */
 
-static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
-					   const u8 addr2[6+2])
+static inline bool ether_addr_equal_64bits(const u8 *addr1, const u8 *addr2)
 {
 #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
 	u64 fold = (*(const u64 *)addr1) ^ (*(const u64 *)addr2);

[PATCH 4.19 02/53] mm: page_alloc: fix building error on -Werror=array-compare

[Greg Kroah-Hartman]

From: Xiongwei Song <sxwjean@gmail.com>

commit ca831f29f8f25c97182e726429b38c0802200c8f upstream.

Arthur Marsh reported we would hit the error below when building kernel
with gcc-12:

  CC      mm/page_alloc.o
  mm/page_alloc.c: In function `mem_init_print_info':
  mm/page_alloc.c:8173:27: error: comparison between two arrays [-Werror=array-compare]
   8173 |                 if (start <= pos && pos < end && size > adj) \
        |

In C++20, the comparision between arrays should be warned.

Link: https://lkml.kernel.org/r/20211125130928.32465-1-sxwjean@me.com
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/page_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7117,7 +7117,7 @@ void __init mem_init_print_info(const ch
 	 */
 #define adj_init_size(start, end, size, pos, adj) \
 	do { \
-		if (start <= pos && pos < end && size > adj) \
+		if (&start[0] <= &pos[0] && &pos[0] < &end[0] && size > adj) \
 			size -= adj; \
 	} while (0)
 

[PATCH 4.19 03/53] tracing: Dump stacktrace trigger to the corresponding instance

[Greg Kroah-Hartman]

From: Daniel Bristot de Oliveira <bristot@kernel.org>

commit ce33c845b030c9cf768370c951bc699470b09fa7 upstream.

The stacktrace event trigger is not dumping the stacktrace to the instance
where it was enabled, but to the global "instance."

Use the private_data, pointing to the trigger file, to figure out the
corresponding trace instance, and use it in the trigger action, like
snapshot_trigger does.

Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org

Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_events_trigger.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/kernel/trace/trace_events_trigger.c
+++ b/kernel/trace/trace_events_trigger.c
@@ -1212,7 +1212,14 @@ static void
 stacktrace_trigger(struct event_trigger_data *data, void *rec,
 		   struct ring_buffer_event *event)
 {
-	trace_dump_stack(STACK_SKIP);
+	struct trace_event_file *file = data->private_data;
+	unsigned long flags;
+
+	if (file) {
+		local_save_flags(flags);
+		__trace_stack(file->tr, flags, STACK_SKIP, preempt_count());
+	} else
+		trace_dump_stack(STACK_SKIP);
 }
 
 static void

[PATCH 4.19 04/53] can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

commit 3d3925ff6433f98992685a9679613a2cc97f3ce2 upstream.

There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.

Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[DP: adjusted params of can_free_echo_skb() for 4.19 stable]
Signed-off-by: Dragos-Marian Panait <dragos.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/usb_8dev.c |   30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -681,9 +681,20 @@ static netdev_tx_t usb_8dev_start_xmit(s
 	atomic_inc(&priv->active_tx_urbs);
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (unlikely(err))
-		goto failed;
-	else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
+	if (unlikely(err)) {
+		can_free_echo_skb(netdev, context->echo_index);
+
+		usb_unanchor_urb(urb);
+		usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
+
+		atomic_dec(&priv->active_tx_urbs);
+
+		if (err == -ENODEV)
+			netif_device_detach(netdev);
+		else
+			netdev_warn(netdev, "failed tx_urb %d\n", err);
+		stats->tx_dropped++;
+	} else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
 		/* Slow down tx path */
 		netif_stop_queue(netdev);
 
@@ -702,19 +713,6 @@ nofreecontext:
 
 	return NETDEV_TX_BUSY;
 
-failed:
-	can_free_echo_skb(netdev, context->echo_index);
-
-	usb_unanchor_urb(urb);
-	usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
-
-	atomic_dec(&priv->active_tx_urbs);
-
-	if (err == -ENODEV)
-		netif_device_detach(netdev);
-	else
-		netdev_warn(netdev, "failed tx_urb %d\n", err);
-
 nomembuf:
 	usb_free_urb(urb);
 

[PATCH 4.19 05/53] dm integrity: fix memory corruption when tag_size is less than digest size

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 08c1af8f1c13bbf210f1760132f4df24d0ed46d6 upstream.

It is possible to set up dm-integrity in such a way that the
"tag_size" parameter is less than the actual digest size. In this
situation, a part of the digest beyond tag_size is ignored.

In this case, dm-integrity would write beyond the end of the
ic->recalc_tags array and corrupt memory. The corruption happened in
integrity_recalc->integrity_sector_checksum->crypto_shash_final.

Fix this corruption by increasing the tags array so that it has enough
padding at the end to accomodate the loop in integrity_recalc() being
able to write a full digest size for the last member of the tags
array.

Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-integrity.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -3504,6 +3504,7 @@ try_smaller_buffer:
 	}
 
 	if (ic->sb->flags & cpu_to_le32(SB_FLAG_RECALCULATING)) {
+		size_t recalc_tags_size;
 		if (!ic->internal_hash) {
 			r = -EINVAL;
 			ti->error = "Recalculate is only valid with internal hash";
@@ -3522,8 +3523,10 @@ try_smaller_buffer:
 			r = -ENOMEM;
 			goto bad;
 		}
-		ic->recalc_tags = kvmalloc_array(RECALC_SECTORS >> ic->sb->log2_sectors_per_block,
-						 ic->tag_size, GFP_KERNEL);
+		recalc_tags_size = (RECALC_SECTORS >> ic->sb->log2_sectors_per_block) * ic->tag_size;
+		if (crypto_shash_digestsize(ic->internal_hash) > ic->tag_size)
+			recalc_tags_size += crypto_shash_digestsize(ic->internal_hash) - ic->tag_size;
+		ic->recalc_tags = kvmalloc(recalc_tags_size, GFP_KERNEL);
 		if (!ic->recalc_tags) {
 			ti->error = "Cannot allocate tags for recalculating";
 			r = -ENOMEM;

[PATCH 4.19 06/53] gfs2: assign rgrp glock before compute_bitstructs

[Greg Kroah-Hartman]

From: Bob Peterson <rpeterso@redhat.com>

commit 428f651cb80b227af47fc302e4931791f2fb4741 upstream.

Before this patch, function read_rindex_entry called compute_bitstructs
before it allocated a glock for the rgrp. But if compute_bitstructs found
a problem with the rgrp, it called gfs2_consist_rgrpd, and that called
gfs2_dump_glock for rgd->rd_gl which had not yet been assigned.

read_rindex_entry
   compute_bitstructs
      gfs2_consist_rgrpd
         gfs2_dump_glock <---------rgd->rd_gl was not set.

This patch changes read_rindex_entry so it assigns an rgrp glock before
calling compute_bitstructs so gfs2_dump_glock does not reference an
unassigned pointer. If an error is discovered, the glock must also be
put, so a new goto and label were added.

Reported-by: syzbot+c6fd14145e2f62ca0784@syzkaller.appspotmail.com
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/gfs2/rgrp.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -926,15 +926,15 @@ static int read_rindex_entry(struct gfs2
 	rgd->rd_bitbytes = be32_to_cpu(buf.ri_bitbytes);
 	spin_lock_init(&rgd->rd_rsspin);
 
-	error = compute_bitstructs(rgd);
-	if (error)
-		goto fail;
-
 	error = gfs2_glock_get(sdp, rgd->rd_addr,
 			       &gfs2_rgrp_glops, CREATE, &rgd->rd_gl);
 	if (error)
 		goto fail;
 
+	error = compute_bitstructs(rgd);
+	if (error)
+		goto fail_glock;
+
 	rgd->rd_rgl = (struct gfs2_rgrp_lvb *)rgd->rd_gl->gl_lksb.sb_lvbptr;
 	rgd->rd_flags &= ~(GFS2_RDF_UPTODATE | GFS2_RDF_PREFERRED);
 	if (rgd->rd_data > sdp->sd_max_rg_data)
@@ -951,6 +951,7 @@ static int read_rindex_entry(struct gfs2
 	}
 
 	error = 0; /* someone else read in the rgrp; free it and ignore it */
+fail_glock:
 	gfs2_glock_put(rgd->rd_gl);
 
 fail:

[PATCH 4.19 07/53] ALSA: usb-audio: Clear MIDI port active flag after draining

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 0665886ad1392e6b5bae85d7a6ccbed48dca1522 upstream.

When a rawmidi output stream is closed, it calls the drain at first,
then does trigger-off only when the drain returns -ERESTARTSYS as a
fallback.  It implies that each driver should turn off the stream
properly after the drain.  Meanwhile, USB-audio MIDI interface didn't
change the port->active flag after the drain.  This may leave the
output work picking up the port that is closed right now, which
eventually leads to a use-after-free for the already released rawmidi
object.

This patch fixes the bug by properly clearing the port->active flag
after the output drain.

Reported-by: syzbot+70e777a39907d6d5fd0a@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000011555605dceaff03@google.com
Link: https://lore.kernel.org/r/20220420130247.22062-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/midi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1211,6 +1211,7 @@ static void snd_usbmidi_output_drain(str
 		} while (drain_urbs && timeout);
 		finish_wait(&ep->drain_wait, &wait);
 	}
+	port->active = 0;
 	spin_unlock_irq(&ep->buffer_lock);
 }
 

[PATCH 4.19 08/53] tcp: fix race condition when creating child sockets from syncookies

[Greg Kroah-Hartman]

From: Ricardo Dias <rdias@singlestore.com>

[ Upstream commit 01770a166165738a6e05c3d911fb4609cc4eb416 ]

When the TCP stack is in SYN flood mode, the server child socket is
created from the SYN cookie received in a TCP packet with the ACK flag
set.

The child socket is created when the server receives the first TCP
packet with a valid SYN cookie from the client. Usually, this packet
corresponds to the final step of the TCP 3-way handshake, the ACK
packet. But is also possible to receive a valid SYN cookie from the
first TCP data packet sent by the client, and thus create a child socket
from that SYN cookie.

Since a client socket is ready to send data as soon as it receives the
SYN+ACK packet from the server, the client can send the ACK packet (sent
by the TCP stack code), and the first data packet (sent by the userspace
program) almost at the same time, and thus the server will equally
receive the two TCP packets with valid SYN cookies almost at the same
instant.

When such event happens, the TCP stack code has a race condition that
occurs between the momement a lookup is done to the established
connections hashtable to check for the existence of a connection for the
same client, and the moment that the child socket is added to the
established connections hashtable. As a consequence, this race condition
can lead to a situation where we add two child sockets to the
established connections hashtable and deliver two sockets to the
userspace program to the same client.

This patch fixes the race condition by checking if an existing child
socket exists for the same client when we are adding the second child
socket to the established connections socket. If an existing child
socket exists, we drop the packet and discard the second child socket
to the same client.

Signed-off-by: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/inet_hashtables.h   |    5 +-
 net/dccp/ipv4.c                 |    2 -
 net/dccp/ipv6.c                 |    2 -
 net/ipv4/inet_connection_sock.c |    2 -
 net/ipv4/inet_hashtables.c      |   68 +++++++++++++++++++++++++++++++++++-----
 net/ipv4/tcp_ipv4.c             |   15 +++++++-
 net/ipv6/tcp_ipv6.c             |   13 +++++++
 7 files changed, 91 insertions(+), 16 deletions(-)

--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -232,8 +232,9 @@ void inet_hashinfo2_init(struct inet_has
 			 unsigned long low_limit,
 			 unsigned long high_limit);
 
-bool inet_ehash_insert(struct sock *sk, struct sock *osk);
-bool inet_ehash_nolisten(struct sock *sk, struct sock *osk);
+bool inet_ehash_insert(struct sock *sk, struct sock *osk, bool *found_dup_sk);
+bool inet_ehash_nolisten(struct sock *sk, struct sock *osk,
+			 bool *found_dup_sk);
 int __inet_hash(struct sock *sk, struct sock *osk);
 int inet_hash(struct sock *sk);
 void inet_unhash(struct sock *sk);
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -428,7 +428,7 @@ struct sock *dccp_v4_request_recv_sock(c
 
 	if (__inet_inherit_port(sk, newsk) < 0)
 		goto put_and_exit;
-	*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash));
+	*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash), NULL);
 	if (*own_req)
 		ireq->ireq_opt = NULL;
 	else
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -538,7 +538,7 @@ static struct sock *dccp_v6_request_recv
 		dccp_done(newsk);
 		goto out;
 	}
-	*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash));
+	*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash), NULL);
 	/* Clone pktoptions received with SYN, if we own the req */
 	if (*own_req && ireq->pktopts) {
 		newnp->pktoptions = skb_clone(ireq->pktopts, GFP_ATOMIC);
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -793,7 +793,7 @@ static void reqsk_queue_hash_req(struct
 	timer_setup(&req->rsk_timer, reqsk_timer_handler, TIMER_PINNED);
 	mod_timer(&req->rsk_timer, jiffies + timeout);
 
-	inet_ehash_insert(req_to_sk(req), NULL);
+	inet_ehash_insert(req_to_sk(req), NULL, NULL);
 	/* before letting lookups find us, make sure all req fields
 	 * are committed to memory and refcnt initialized.
 	 */
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -24,6 +24,9 @@
 #include <net/addrconf.h>
 #include <net/inet_connection_sock.h>
 #include <net/inet_hashtables.h>
+#if IS_ENABLED(CONFIG_IPV6)
+#include <net/inet6_hashtables.h>
+#endif
 #include <net/secure_seq.h>
 #include <net/ip.h>
 #include <net/tcp.h>
@@ -513,10 +516,52 @@ static u32 inet_sk_port_offset(const str
 					  inet->inet_dport);
 }
 
-/* insert a socket into ehash, and eventually remove another one
- * (The another one can be a SYN_RECV or TIMEWAIT
+/* Searches for an exsiting socket in the ehash bucket list.
+ * Returns true if found, false otherwise.
  */
-bool inet_ehash_insert(struct sock *sk, struct sock *osk)
+static bool inet_ehash_lookup_by_sk(struct sock *sk,
+				    struct hlist_nulls_head *list)
+{
+	const __portpair ports = INET_COMBINED_PORTS(sk->sk_dport, sk->sk_num);
+	const int sdif = sk->sk_bound_dev_if;
+	const int dif = sk->sk_bound_dev_if;
+	const struct hlist_nulls_node *node;
+	struct net *net = sock_net(sk);
+	struct sock *esk;
+
+	INET_ADDR_COOKIE(acookie, sk->sk_daddr, sk->sk_rcv_saddr);
+
+	sk_nulls_for_each_rcu(esk, node, list) {
+		if (esk->sk_hash != sk->sk_hash)
+			continue;
+		if (sk->sk_family == AF_INET) {
+			if (unlikely(INET_MATCH(esk, net, acookie,
+						sk->sk_daddr,
+						sk->sk_rcv_saddr,
+						ports, dif, sdif))) {
+				return true;
+			}
+		}
+#if IS_ENABLED(CONFIG_IPV6)
+		else if (sk->sk_family == AF_INET6) {
+			if (unlikely(INET6_MATCH(esk, net,
+						 &sk->sk_v6_daddr,
+						 &sk->sk_v6_rcv_saddr,
+						 ports, dif, sdif))) {
+				return true;
+			}
+		}
+#endif
+	}
+	return false;
+}
+
+/* Insert a socket into ehash, and eventually remove another one
+ * (The another one can be a SYN_RECV or TIMEWAIT)
+ * If an existing socket already exists, socket sk is not inserted,
+ * and sets found_dup_sk parameter to true.
+ */
+bool inet_ehash_insert(struct sock *sk, struct sock *osk, bool *found_dup_sk)
 {
 	struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
 	struct hlist_nulls_head *list;
@@ -535,16 +580,23 @@ bool inet_ehash_insert(struct sock *sk,
 	if (osk) {
 		WARN_ON_ONCE(sk->sk_hash != osk->sk_hash);
 		ret = sk_nulls_del_node_init_rcu(osk);
+	} else if (found_dup_sk) {
+		*found_dup_sk = inet_ehash_lookup_by_sk(sk, list);
+		if (*found_dup_sk)
+			ret = false;
 	}
+
 	if (ret)
 		__sk_nulls_add_node_rcu(sk, list);
+
 	spin_unlock(lock);
+
 	return ret;
 }
 
-bool inet_ehash_nolisten(struct sock *sk, struct sock *osk)
+bool inet_ehash_nolisten(struct sock *sk, struct sock *osk, bool *found_dup_sk)
 {
-	bool ok = inet_ehash_insert(sk, osk);
+	bool ok = inet_ehash_insert(sk, osk, found_dup_sk);
 
 	if (ok) {
 		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
@@ -588,7 +640,7 @@ int __inet_hash(struct sock *sk, struct
 	int err = 0;
 
 	if (sk->sk_state != TCP_LISTEN) {
-		inet_ehash_nolisten(sk, osk);
+		inet_ehash_nolisten(sk, osk, NULL);
 		return 0;
 	}
 	WARN_ON(!sk_unhashed(sk));
@@ -683,7 +735,7 @@ int __inet_hash_connect(struct inet_time
 		tb = inet_csk(sk)->icsk_bind_hash;
 		spin_lock_bh(&head->lock);
 		if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) {
-			inet_ehash_nolisten(sk, NULL);
+			inet_ehash_nolisten(sk, NULL, NULL);
 			spin_unlock_bh(&head->lock);
 			return 0;
 		}
@@ -759,7 +811,7 @@ ok:
 	inet_bind_hash(sk, tb, port);
 	if (sk_unhashed(sk)) {
 		inet_sk(sk)->inet_sport = htons(port);
-		inet_ehash_nolisten(sk, (struct sock *)tw);
+		inet_ehash_nolisten(sk, (struct sock *)tw, NULL);
 	}
 	if (tw)
 		inet_twsk_bind_unhash(tw, hinfo);
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1415,6 +1415,7 @@ struct sock *tcp_v4_syn_recv_sock(const
 				  bool *own_req)
 {
 	struct inet_request_sock *ireq;
+	bool found_dup_sk = false;
 	struct inet_sock *newinet;
 	struct tcp_sock *newtp;
 	struct sock *newsk;
@@ -1485,12 +1486,22 @@ struct sock *tcp_v4_syn_recv_sock(const
 
 	if (__inet_inherit_port(sk, newsk) < 0)
 		goto put_and_exit;
-	*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash));
+	*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash),
+				       &found_dup_sk);
 	if (likely(*own_req)) {
 		tcp_move_syn(newtp, req);
 		ireq->ireq_opt = NULL;
 	} else {
-		newinet->inet_opt = NULL;
+		if (!req_unhash && found_dup_sk) {
+			/* This code path should only be executed in the
+			 * syncookie case only
+			 */
+			bh_unlock_sock(newsk);
+			sock_put(newsk);
+			newsk = NULL;
+		} else {
+			newinet->inet_opt = NULL;
+		}
 	}
 	return newsk;
 
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1090,6 +1090,7 @@ static struct sock *tcp_v6_syn_recv_sock
 	struct ipv6_txoptions *opt;
 	struct tcp6_sock *newtcp6sk;
 	struct inet_sock *newinet;
+	bool found_dup_sk = false;
 	struct tcp_sock *newtp;
 	struct sock *newsk;
 #ifdef CONFIG_TCP_MD5SIG
@@ -1258,7 +1259,8 @@ static struct sock *tcp_v6_syn_recv_sock
 		tcp_done(newsk);
 		goto out;
 	}
-	*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash));
+	*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash),
+				       &found_dup_sk);
 	if (*own_req) {
 		tcp_move_syn(newtp, req);
 
@@ -1273,6 +1275,15 @@ static struct sock *tcp_v6_syn_recv_sock
 				skb_set_owner_r(newnp->pktoptions, newsk);
 			}
 		}
+	} else {
+		if (!req_unhash && found_dup_sk) {
+			/* This code path should only be executed in the
+			 * syncookie case only
+			 */
+			bh_unlock_sock(newsk);
+			sock_put(newsk);
+			newsk = NULL;
+		}
 	}
 
 	return newsk;

[PATCH 4.19 09/53] tcp: Fix potential use-after-free due to double kfree()

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.co.jp>

commit c89dffc70b340780e5b933832d8c3e045ef3791e upstream.

Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct
request_sock and then can allocate inet_rsk(req)->ireq_opt. After that,
tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to
inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full
socket into ehash and sets NULL to ireq_opt. Otherwise,
tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full
socket.

The commit 01770a1661657 ("tcp: fix race condition when creating child
sockets from syncookies") added a new path, in which more than one cores
create full sockets for the same SYN cookie. Currently, the core which
loses the race frees the full socket without resetting inet_opt, resulting
in that both sock_put() and reqsk_put() call kfree() for the same memory:

  sock_put
    sk_free
      __sk_free
        sk_destruct
          __sk_destruct
            sk->sk_destruct/inet_sock_destruct
              kfree(rcu_dereference_protected(inet->inet_opt, 1));

  reqsk_put
    reqsk_free
      __reqsk_free
        req->rsk_ops->destructor/tcp_v4_reqsk_destructor
          kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1));

Calling kmalloc() between the double kfree() can lead to use-after-free, so
this patch fixes it by setting NULL to inet_opt before sock_put().

As a side note, this kind of issue does not happen for IPv6. This is
because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which
correspond to ireq_opt in IPv4.

Fixes: 01770a166165 ("tcp: fix race condition when creating child sockets from syncookies")
CC: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210118055920.82516-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_ipv4.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1492,6 +1492,8 @@ struct sock *tcp_v4_syn_recv_sock(const
 		tcp_move_syn(newtp, req);
 		ireq->ireq_opt = NULL;
 	} else {
+		newinet->inet_opt = NULL;
+
 		if (!req_unhash && found_dup_sk) {
 			/* This code path should only be executed in the
 			 * syncookie case only
@@ -1499,8 +1501,6 @@ struct sock *tcp_v4_syn_recv_sock(const
 			bh_unlock_sock(newsk);
 			sock_put(newsk);
 			newsk = NULL;
-		} else {
-			newinet->inet_opt = NULL;
 		}
 	}
 	return newsk;

[PATCH 4.19 10/53] ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit c775cbf62ed4911e4f0f23880f01815753123690 ]

The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC, intended in the reference software to be supplied
using PLLB and programmed to 12MHz. As originally written for use with a
board file the audio driver was responsible for configuring the entire tree
but in the conversion to the common clock framework the registration of
the named pck0 and pllb clocks was removed so the driver has failed to
instantiate ever since.

Since the WM8731 driver has had support for managing a MCLK provided via
the common clock framework for some time we can simply drop all the clock
management code from the machine driver other than configuration of the
sysclk rate, the CODEC driver still respects that configuration from the
machine driver.

Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220325154241.1600757-2-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/atmel/sam9g20_wm8731.c | 61 --------------------------------
 1 file changed, 61 deletions(-)

diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 5041f43ee5f7..06d32257ddb6 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -59,35 +59,6 @@
  */
 #undef ENABLE_MIC_INPUT
 
-static struct clk *mclk;
-
-static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card,
-					struct snd_soc_dapm_context *dapm,
-					enum snd_soc_bias_level level)
-{
-	static int mclk_on;
-	int ret = 0;
-
-	switch (level) {
-	case SND_SOC_BIAS_ON:
-	case SND_SOC_BIAS_PREPARE:
-		if (!mclk_on)
-			ret = clk_enable(mclk);
-		if (ret == 0)
-			mclk_on = 1;
-		break;
-
-	case SND_SOC_BIAS_OFF:
-	case SND_SOC_BIAS_STANDBY:
-		if (mclk_on)
-			clk_disable(mclk);
-		mclk_on = 0;
-		break;
-	}
-
-	return ret;
-}
-
 static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
 	SND_SOC_DAPM_MIC("Int Mic", NULL),
 	SND_SOC_DAPM_SPK("Ext Spk", NULL),
@@ -146,7 +117,6 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = {
 	.owner = THIS_MODULE,
 	.dai_link = &at91sam9g20ek_dai,
 	.num_links = 1,
-	.set_bias_level = at91sam9g20ek_set_bias_level,
 
 	.dapm_widgets = at91sam9g20ek_dapm_widgets,
 	.num_dapm_widgets = ARRAY_SIZE(at91sam9g20ek_dapm_widgets),
@@ -159,7 +129,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct device_node *codec_np, *cpu_np;
-	struct clk *pllb;
 	struct snd_soc_card *card = &snd_soc_at91sam9g20ek;
 	int ret;
 
@@ -173,31 +142,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	/*
-	 * Codec MCLK is supplied by PCK0 - set it up.
-	 */
-	mclk = clk_get(NULL, "pck0");
-	if (IS_ERR(mclk)) {
-		dev_err(&pdev->dev, "Failed to get MCLK\n");
-		ret = PTR_ERR(mclk);
-		goto err;
-	}
-
-	pllb = clk_get(NULL, "pllb");
-	if (IS_ERR(pllb)) {
-		dev_err(&pdev->dev, "Failed to get PLLB\n");
-		ret = PTR_ERR(pllb);
-		goto err_mclk;
-	}
-	ret = clk_set_parent(mclk, pllb);
-	clk_put(pllb);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "Failed to set MCLK parent\n");
-		goto err_mclk;
-	}
-
-	clk_set_rate(mclk, MCLK_RATE);
-
 	card->dev = &pdev->dev;
 
 	/* Parse device node info */
@@ -241,9 +185,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
 
 	return ret;
 
-err_mclk:
-	clk_put(mclk);
-	mclk = NULL;
 err:
 	atmel_ssc_put_audio(0);
 	return ret;
@@ -253,8 +194,6 @@ static int at91sam9g20ek_audio_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
 
-	clk_disable(mclk);
-	mclk = NULL;
 	snd_soc_unregister_card(card);
 	atmel_ssc_put_audio(0);
 
-- 
2.35.1

[PATCH 4.19 11/53] ASoC: msm8916-wcd-digital: Check failure for devm_snd_soc_register_component

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit e927b05f3cc20de87f6b7d912a5bbe556931caca ]

devm_snd_soc_register_component() may fails, we should check the error
and do the corresponding error handling.

Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220403115239.30140-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/msm8916-wcd-digital.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/msm8916-wcd-digital.c b/sound/soc/codecs/msm8916-wcd-digital.c
index e6750bda542a..fa813ec32119 100644
--- a/sound/soc/codecs/msm8916-wcd-digital.c
+++ b/sound/soc/codecs/msm8916-wcd-digital.c
@@ -923,9 +923,16 @@ static int msm8916_wcd_digital_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(dev, priv);
 
-	return devm_snd_soc_register_component(dev, &msm8916_wcd_digital,
+	ret = devm_snd_soc_register_component(dev, &msm8916_wcd_digital,
 				      msm8916_wcd_digital_dai,
 				      ARRAY_SIZE(msm8916_wcd_digital_dai));
+	if (ret)
+		goto err_mclk;
+
+	return 0;
+
+err_mclk:
+	clk_disable_unprepare(priv->mclk);
 err_clk:
 	clk_disable_unprepare(priv->ahbclk);
 	return ret;
-- 
2.35.1

[PATCH 4.19 12/53] dmaengine: imx-sdma: Fix error checking in sdma_event_remap

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 7104b9cb35a33ad803a1adbbfa50569b008faf15 ]

of_parse_phandle() returns NULL on errors, rather than error
pointers. Using NULL check on grp_np to fix this.

Fixes: d078cd1b4185 ("dmaengine: imx-sdma: Add imx6sx platform support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220308064952.15743-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/imx-sdma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index eea89c3b54c1..709ead443fc5 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1771,7 +1771,7 @@ static int sdma_event_remap(struct sdma_engine *sdma)
 	u32 reg, val, shift, num_map, i;
 	int ret = 0;
 
-	if (IS_ERR(np) || IS_ERR(gpr_np))
+	if (IS_ERR(np) || !gpr_np)
 		goto out;
 
 	event_remap = of_find_property(np, propname, NULL);
@@ -1819,7 +1819,7 @@ static int sdma_event_remap(struct sdma_engine *sdma)
 	}
 
 out:
-	if (!IS_ERR(gpr_np))
+	if (gpr_np)
 		of_node_put(gpr_np);
 
 	return ret;
-- 
2.35.1

[PATCH 4.19 13/53] rxrpc: Restore removed timer deletion

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit ee3b0826b4764f6c13ad6db67495c5a1c38e9025 ]

A recent patch[1] from Eric Dumazet flipped the order in which the
keepalive timer and the keepalive worker were cancelled in order to fix a
syzbot reported issue[2].  Unfortunately, this enables the mirror image bug
whereby the timer races with rxrpc_exit_net(), restarting the worker after
it has been cancelled:

	CPU 1		CPU 2
	===============	=====================
			if (rxnet->live)
			<INTERRUPT>
	rxnet->live = false;
 	cancel_work_sync(&rxnet->peer_keepalive_work);
			rxrpc_queue_work(&rxnet->peer_keepalive_work);
	del_timer_sync(&rxnet->peer_keepalive_timer);

Fix this by restoring the removed del_timer_sync() so that we try to remove
the timer twice.  If the timer runs again, it should see ->live == false
and not restart the worker.

Fixes: 1946014ca3b1 ("rxrpc: fix a race in rxrpc_exit_net()")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20220404183439.3537837-1-eric.dumazet@gmail.com/ [1]
Link: https://syzkaller.appspot.com/bug?extid=724378c4bb58f703b09a [2]
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/net_ns.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/rxrpc/net_ns.c b/net/rxrpc/net_ns.c
index 1b403c2573da..39579cfcf9b8 100644
--- a/net/rxrpc/net_ns.c
+++ b/net/rxrpc/net_ns.c
@@ -117,7 +117,9 @@ static __net_exit void rxrpc_exit_net(struct net *net)
 	struct rxrpc_net *rxnet = rxrpc_net(net);
 
 	rxnet->live = false;
+	del_timer_sync(&rxnet->peer_keepalive_timer);
 	cancel_work_sync(&rxnet->peer_keepalive_work);
+	/* Remove the timer again as the worker may have restarted it. */
 	del_timer_sync(&rxnet->peer_keepalive_timer);
 	rxrpc_destroy_all_calls(rxnet);
 	rxrpc_destroy_all_connections(rxnet);
-- 
2.35.1

[PATCH 4.19 14/53] net/packet: fix packet_sock xmit return value checking

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 29e8e659f984be00d75ec5fef4e37c88def72712 ]

packet_sock xmit could be dev_queue_xmit, which also returns negative
errors. So only checking positive errors is not enough, or userspace
sendmsg may return success while packet is not send out.

Move the net_xmit_errno() assignment in the braces as checkpatch.pl said
do not use assignment in if condition.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index b951f411dded..f654f79e3310 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2791,8 +2791,9 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
 
 		status = TP_STATUS_SEND_REQUEST;
 		err = po->xmit(skb);
-		if (unlikely(err > 0)) {
-			err = net_xmit_errno(err);
+		if (unlikely(err != 0)) {
+			if (err > 0)
+				err = net_xmit_errno(err);
 			if (err && __packet_get_status(po, ph) ==
 				   TP_STATUS_AVAILABLE) {
 				/* skb was destructed already */
@@ -2993,8 +2994,12 @@ static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len)
 		skb->no_fcs = 1;
 
 	err = po->xmit(skb);
-	if (err > 0 && (err = net_xmit_errno(err)) != 0)
-		goto out_unlock;
+	if (unlikely(err != 0)) {
+		if (err > 0)
+			err = net_xmit_errno(err);
+		if (err)
+			goto out_unlock;
+	}
 
 	dev_put(dev);
 
-- 
2.35.1

[PATCH 4.19 15/53] net/sched: cls_u32: fix possible leak in u32_init_knode()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit ec5b0f605b105457f257f2870acad4a5d463984b ]

While investigating a related syzbot report,
I found that whenever call to tcf_exts_init()
from u32_init_knode() is failing, we end up
with an elevated refcount on ht->refcnt

To avoid that, only increase the refcount after
all possible errors have been evaluated.

Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/cls_u32.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index fe246e03fcd9..5eee26cf9011 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -873,10 +873,6 @@ static struct tc_u_knode *u32_init_knode(struct tcf_proto *tp,
 	new->flags = n->flags;
 	RCU_INIT_POINTER(new->ht_down, ht);
 
-	/* bump reference count as long as we hold pointer to structure */
-	if (ht)
-		ht->refcnt++;
-
 #ifdef CONFIG_CLS_U32_PERF
 	/* Statistics may be incremented by readers during update
 	 * so we must keep them in tact. When the node is later destroyed
@@ -899,6 +895,10 @@ static struct tc_u_knode *u32_init_knode(struct tcf_proto *tp,
 		return NULL;
 	}
 
+	/* bump reference count as long as we hold pointer to structure */
+	if (ht)
+		ht->refcnt++;
+
 	return new;
 }
 
-- 
2.35.1

[PATCH 4.19 16/53] netlink: reset network and mac headers in netlink_dump()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 99c07327ae11e24886d552dddbe4537bfca2765d ]

netlink_dump() is allocating an skb, reserves space in it
but forgets to reset network header.

This allows a BPF program, invoked later from sk_filter()
to access uninitialized kernel memory from the reserved
space.

Theorically mac header reset could be omitted, because
it is set to a special initial value.
bpf_internal_load_pointer_neg_helper calls skb_mac_header()
without checking skb_mac_header_was_set().
Relying on skb->len not being too big seems fragile.
We also could add a sanity check in bpf_internal_load_pointer_neg_helper()
to avoid surprises in the future.

syzbot report was:

BUG: KMSAN: uninit-value in ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637
 ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637
 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796
 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline]
 __bpf_prog_run include/linux/filter.h:626 [inline]
 bpf_prog_run include/linux/filter.h:633 [inline]
 __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756
 bpf_prog_run_save_cb include/linux/filter.h:770 [inline]
 sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150
 sk_filter include/linux/filter.h:905 [inline]
 netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was stored to memory at:
 ___bpf_prog_run+0x96c/0xb420 kernel/bpf/core.c:1558
 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796
 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline]
 __bpf_prog_run include/linux/filter.h:626 [inline]
 bpf_prog_run include/linux/filter.h:633 [inline]
 __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756
 bpf_prog_run_save_cb include/linux/filter.h:770 [inline]
 sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150
 sk_filter include/linux/filter.h:905 [inline]
 netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3244 [inline]
 __kmalloc_node_track_caller+0xde3/0x14f0 mm/slub.c:4972
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x30f/0x16c0 net/netlink/af_netlink.c:2242
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

CPU: 0 PID: 3470 Comm: syz-executor751 Not tainted 5.17.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: db65a3aaf29e ("netlink: Trim skb to alloc size to avoid MSG_TRUNC")
Fixes: 9063e21fb026 ("netlink: autosize skb lengthes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220415181442.551228-1-eric.dumazet@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlink/af_netlink.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 5c6241964637..e2120221b957 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2243,6 +2243,13 @@ static int netlink_dump(struct sock *sk)
 	 * single netdev. The outcome is MSG_TRUNC error.
 	 */
 	skb_reserve(skb, skb_tailroom(skb) - alloc_size);
+
+	/* Make sure malicious BPF programs can not read unitialized memory
+	 * from skb->head -> skb->data
+	 */
+	skb_reset_network_header(skb);
+	skb_reset_mac_header(skb);
+
 	netlink_skb_set_owner_r(skb, sk);
 
 	if (nlk->dump_done_errno > 0)
-- 
2.35.1

[PATCH 4.19 17/53] ARM: vexpress/spc: Avoid negative array index when !SMP

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit b3f1dd52c991d79118f35e6d1bf4d7cb09882e38 ]

When building multi_v7_defconfig+CONFIG_SMP=n, -Warray-bounds exposes
a couple negative array index accesses:

arch/arm/mach-vexpress/spc.c: In function 've_spc_clk_init':
arch/arm/mach-vexpress/spc.c:583:21: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  583 |   if (init_opp_table[cluster])
      |       ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~
arch/arm/mach-vexpress/spc.c:592:18: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  592 |    init_opp_table[cluster] = true;
      |    ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~

Skip this logic when built !SMP.

Link: https://lore.kernel.org/r/20220331190443.851661-1-keescook@chromium.org
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-vexpress/spc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 55bbbc3b328f..e65c04be86cc 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void)
 		}
 
 		cluster = topology_physical_package_id(cpu_dev->id);
-		if (init_opp_table[cluster])
+		if (cluster < 0 || init_opp_table[cluster])
 			continue;
 
 		if (ve_init_opp_table(cpu_dev))
-- 
2.35.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4.19 17/53] ARM: vexpress/spc: Avoid negative array index when !SMP

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit b3f1dd52c991d79118f35e6d1bf4d7cb09882e38 ]

When building multi_v7_defconfig+CONFIG_SMP=n, -Warray-bounds exposes
a couple negative array index accesses:

arch/arm/mach-vexpress/spc.c: In function 've_spc_clk_init':
arch/arm/mach-vexpress/spc.c:583:21: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  583 |   if (init_opp_table[cluster])
      |       ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~
arch/arm/mach-vexpress/spc.c:592:18: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  592 |    init_opp_table[cluster] = true;
      |    ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~

Skip this logic when built !SMP.

Link: https://lore.kernel.org/r/20220331190443.851661-1-keescook@chromium.org
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-vexpress/spc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 55bbbc3b328f..e65c04be86cc 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void)
 		}
 
 		cluster = topology_physical_package_id(cpu_dev->id);
-		if (init_opp_table[cluster])
+		if (cluster < 0 || init_opp_table[cluster])
 			continue;
 
 		if (ve_init_opp_table(cpu_dev))
-- 
2.35.1

[PATCH 4.19 18/53] reset: tegra-bpmp: Restore Handle errors in BPMP response

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

[ Upstream commit d1da1052ffad63aa5181b69f20a6952e31f339c2 ]

This reverts following commit 69125b4b9440 ("reset: tegra-bpmp: Revert
Handle errors in BPMP response").

The Tegra194 HDA reset failure is fixed by commit d278dc9151a0 ("ALSA:
hda/tegra: Fix Tegra194 HDA reset failure"). The temporary revert of
original commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP
response") can be removed now.

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1641995806-15245-1-git-send-email-spujar@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/tegra/reset-bpmp.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/reset/tegra/reset-bpmp.c b/drivers/reset/tegra/reset-bpmp.c
index 5daf2ee1a396..f9790b60f996 100644
--- a/drivers/reset/tegra/reset-bpmp.c
+++ b/drivers/reset/tegra/reset-bpmp.c
@@ -23,6 +23,7 @@ static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc,
 	struct tegra_bpmp *bpmp = to_tegra_bpmp(rstc);
 	struct mrq_reset_request request;
 	struct tegra_bpmp_message msg;
+	int err;
 
 	memset(&request, 0, sizeof(request));
 	request.cmd = command;
@@ -33,7 +34,13 @@ static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc,
 	msg.tx.data = &request;
 	msg.tx.size = sizeof(request);
 
-	return tegra_bpmp_transfer(bpmp, &msg);
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	return 0;
 }
 
 static int tegra_bpmp_reset_module(struct reset_controller_dev *rstc,
-- 
2.35.1

[PATCH 4.19 19/53] platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative

[Greg Kroah-Hartman]

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit 0284d4d1be753f648f28b77bdfbe6a959212af5c ]

Eliminate the follow smatch warnings:

drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned
'value' is never less than zero.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220322061830.105579-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/samsung-laptop.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index 7b160ee98115..3e66be504a0d 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -1125,8 +1125,6 @@ static void kbd_led_set(struct led_classdev *led_cdev,
 
 	if (value > samsung->kbd_led.max_brightness)
 		value = samsung->kbd_led.max_brightness;
-	else if (value < 0)
-		value = 0;
 
 	samsung->kbd_led_wk = value;
 	queue_work(samsung->led_workqueue, &samsung->kbd_led_work);
-- 
2.35.1

[PATCH 4.19 20/53] ALSA: usb-audio: Fix undefined behavior due to shift overflowing the constant

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 1ef8715975de8bd481abbd0839ed4f49d9e5b0ff ]

Fix:

  sound/usb/midi.c: In function ‘snd_usbmidi_out_endpoint_create’:
  sound/usb/midi.c:1389:2: error: case label does not reduce to an integer constant
    case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

[ A slight correction with parentheses around the argument by tiwai ]

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220405151517.29753-3-bp@alien8.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/usbaudio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 0c7ea78317fc..0206fecfd377 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -22,7 +22,7 @@
  */
 
 /* handling of USB vendor/product ID pairs as 32-bit numbers */
-#define USB_ID(vendor, product) (((vendor) << 16) | (product))
+#define USB_ID(vendor, product) (((unsigned int)(vendor) << 16) | (product))
 #define USB_ID_VENDOR(id) ((id) >> 16)
 #define USB_ID_PRODUCT(id) ((u16)(id))
 
-- 
2.35.1

[PATCH 4.19 21/53] vxlan: fix error return code in vxlan_fdb_append

[Greg Kroah-Hartman]

From: Hongbin Wang <wh_bin@126.com>

[ Upstream commit 7cea5560bf656b84f9ed01c0cc829d4eecd0640b ]

When kmalloc and dst_cache_init failed,
should return ENOMEM rather than ENOBUFS.

Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index eacc1e32d547..1b98a888a168 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -524,11 +524,11 @@ static int vxlan_fdb_append(struct vxlan_fdb *f,
 
 	rd = kmalloc(sizeof(*rd), GFP_ATOMIC);
 	if (rd == NULL)
-		return -ENOBUFS;
+		return -ENOMEM;
 
 	if (dst_cache_init(&rd->dst_cache, GFP_ATOMIC)) {
 		kfree(rd);
-		return -ENOBUFS;
+		return -ENOMEM;
 	}
 
 	rd->remote_ip = *ip;
-- 
2.35.1

[PATCH 4.19 22/53] cifs: Check the IOCB_DIRECT flag, not O_DIRECT

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 994fd530a512597ffcd713b0f6d5bc916c5698f0 ]

Use the IOCB_DIRECT indicator flag on the I/O context rather than checking to
see if the file was opened O_DIRECT.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifsfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index baa1713d6695..52b1524b40cd 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -813,7 +813,7 @@ cifs_loose_read_iter(struct kiocb *iocb, struct iov_iter *iter)
 	ssize_t rc;
 	struct inode *inode = file_inode(iocb->ki_filp);
 
-	if (iocb->ki_filp->f_flags & O_DIRECT)
+	if (iocb->ki_flags & IOCB_DIRECT)
 		return cifs_user_readv(iocb, iter);
 
 	rc = cifs_revalidate_mapping(inode);
-- 
2.35.1

[PATCH 4.19 23/53] mt76: Fix undefined behavior due to shift overflowing the constant

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit dbc2b1764734857d68425468ffa8486e97ab89df ]

Fix:

  drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’:
  ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \
	declared with attribute error: FIELD_PREP: mask is not constant
    _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Shayne Chen <shayne.chen@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-9-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76x2_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_pci.c b/drivers/net/wireless/mediatek/mt76/mt76x2_pci.c
index 26cfda24ce08..e26947f89299 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_pci.c
@@ -73,7 +73,7 @@ mt76pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	mt76_rmw_field(dev, 0x15a10, 0x1f << 16, 0x9);
 
 	/* RG_SSUSB_G1_CDR_BIC_LTR = 0xf */
-	mt76_rmw_field(dev, 0x15a0c, 0xf << 28, 0xf);
+	mt76_rmw_field(dev, 0x15a0c, 0xfU << 28, 0xf);
 
 	/* RG_SSUSB_CDR_BR_PE1D = 0x3 */
 	mt76_rmw_field(dev, 0x15c58, 0x3 << 6, 0x3);
-- 
2.35.1

[PATCH 4.19 24/53] brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constant

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@alien8.de>

[ Upstream commit 6fb3a5868b2117611f41e421e10e6a8c2a13039a ]

Fix:

  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’:
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant
    case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
    ^~~~
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant
    case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: netdev@vger.kernel.org
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index a5195bdb4d9b..0a96c1071e5b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -560,7 +560,7 @@ enum brcmf_sdio_frmtype {
 	BRCMF_SDIO_FT_SUB,
 };
 
-#define SDIOD_DRVSTR_KEY(chip, pmu)     (((chip) << 16) | (pmu))
+#define SDIOD_DRVSTR_KEY(chip, pmu)     (((unsigned int)(chip) << 16) | (pmu))
 
 /* SDIO Pad drive strength to select value mappings */
 struct sdiod_drive_str {
-- 
2.35.1

[PATCH 4.19 25/53] dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()

[Greg Kroah-Hartman]

From: Lv Ruyi <lv.ruyi@zte.com.cn>

[ Upstream commit 1a7eb80d170c28be2928433702256fe2a0bd1e0f ]

Both of of_get_parent() and of_parse_phandle() return node pointer with
refcount incremented, use of_node_put() on it to decrease refcount
when done.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
index 3184c8f7cdd0..6e69bcdf9c40 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -530,11 +530,15 @@ static int dpaa_get_ts_info(struct net_device *net_dev,
 	info->phc_index = -1;
 
 	fman_node = of_get_parent(mac_node);
-	if (fman_node)
+	if (fman_node) {
 		ptp_node = of_parse_phandle(fman_node, "ptimer-handle", 0);
+		of_node_put(fman_node);
+	}
 
-	if (ptp_node)
+	if (ptp_node) {
 		ptp_dev = of_find_device_by_node(ptp_node);
+		of_node_put(ptp_node);
+	}
 
 	if (ptp_dev)
 		ptp = platform_get_drvdata(ptp_dev);
-- 
2.35.1

[PATCH 4.19 26/53] drm/msm/mdp5: check the return of kzalloc()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

[ Upstream commit 047ae665577776b7feb11bd4f81f46627cff95e7 ]

kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.

Besides, since mdp5_plane_reset() is void type, so we should better
set `plane-state` to NULL after releasing it.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481055/
Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c
index 1ddf07514de6..3d8eaa25bea0 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c
@@ -188,7 +188,10 @@ static void mdp5_plane_reset(struct drm_plane *plane)
 		drm_framebuffer_unreference(plane->state->fb);
 
 	kfree(to_mdp5_plane_state(plane->state));
+	plane->state = NULL;
 	mdp5_state = kzalloc(sizeof(*mdp5_state), GFP_KERNEL);
+	if (!mdp5_state)
+		return;
 
 	/* assign default blend parameters */
 	mdp5_state->alpha = 255;
-- 
2.35.1

[PATCH 4.19 27/53] net: macb: Restart tx only if queue pointer is lagging

[Greg Kroah-Hartman]

From: Tomas Melin <tomas.melin@vaisala.com>

[ Upstream commit 5ad7f18cd82cee8e773d40cc7a1465a526f2615c ]

commit 4298388574da ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.

For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.

This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 460bb81acf2b..d8e4842af055 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -1364,6 +1364,7 @@ static void macb_tx_restart(struct macb_queue *queue)
 	unsigned int head = queue->tx_head;
 	unsigned int tail = queue->tx_tail;
 	struct macb *bp = queue->bp;
+	unsigned int head_idx, tbqp;
 
 	if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
 		queue_writel(queue, ISR, MACB_BIT(TXUBR));
@@ -1371,6 +1372,13 @@ static void macb_tx_restart(struct macb_queue *queue)
 	if (head == tail)
 		return;
 
+	tbqp = queue_readl(queue, TBQP) / macb_dma_desc_get_size(bp);
+	tbqp = macb_adj_dma_desc_idx(bp, macb_tx_ring_wrap(bp, tbqp));
+	head_idx = macb_adj_dma_desc_idx(bp, macb_tx_ring_wrap(bp, head));
+
+	if (tbqp == head_idx)
+		return;
+
 	macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TSTART));
 }
 
-- 
2.35.1

[PATCH 4.19 28/53] stat: fix inconsistency between struct stat and struct compat_stat

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 932aba1e169090357a77af18850a10c256b50819 ]

struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit
st_dev and st_rdev; struct compat_stat (defined in
arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by
a 16-bit padding.

This patch fixes struct compat_stat to match struct stat.

[ Historical note: the old x86 'struct stat' did have that 16-bit field
  that the compat layer had kept around, but it was changes back in 2003
  by "struct stat - support larger dev_t":

    https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d

  and back in those days, the x86_64 port was still new, and separate
  from the i386 code, and had already picked up the old version with a
  16-bit st_dev field ]

Note that we can't change compat_dev_t because it is used by
compat_loop_info.

Also, if the st_dev and st_rdev values are 32-bit, we don't have to use
old_valid_dev to test if the value fits into them.  This fixes
-EOVERFLOW on filesystems that are on NVMe because NVMe uses the major
number 259.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/compat.h |  6 ++----
 fs/stat.c                     | 19 ++++++++++---------
 2 files changed, 12 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index fb97cf7c4137..1def972b6ca3 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -46,15 +46,13 @@ typedef u64 __attribute__((aligned(4))) compat_u64;
 typedef u32		compat_uptr_t;
 
 struct compat_stat {
-	compat_dev_t	st_dev;
-	u16		__pad1;
+	u32		st_dev;
 	compat_ino_t	st_ino;
 	compat_mode_t	st_mode;
 	compat_nlink_t	st_nlink;
 	__compat_uid_t	st_uid;
 	__compat_gid_t	st_gid;
-	compat_dev_t	st_rdev;
-	u16		__pad2;
+	u32		st_rdev;
 	u32		st_size;
 	u32		st_blksize;
 	u32		st_blocks;
diff --git a/fs/stat.c b/fs/stat.c
index f8e6fb2c3657..376543199b5a 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -286,9 +286,6 @@ SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, stat
 #  define choose_32_64(a,b) b
 #endif
 
-#define valid_dev(x)  choose_32_64(old_valid_dev(x),true)
-#define encode_dev(x) choose_32_64(old_encode_dev,new_encode_dev)(x)
-
 #ifndef INIT_STRUCT_STAT_PADDING
 #  define INIT_STRUCT_STAT_PADDING(st) memset(&st, 0, sizeof(st))
 #endif
@@ -297,7 +294,9 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf)
 {
 	struct stat tmp;
 
-	if (!valid_dev(stat->dev) || !valid_dev(stat->rdev))
+	if (sizeof(tmp.st_dev) < 4 && !old_valid_dev(stat->dev))
+		return -EOVERFLOW;
+	if (sizeof(tmp.st_rdev) < 4 && !old_valid_dev(stat->rdev))
 		return -EOVERFLOW;
 #if BITS_PER_LONG == 32
 	if (stat->size > MAX_NON_LFS)
@@ -305,7 +304,7 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf)
 #endif
 
 	INIT_STRUCT_STAT_PADDING(tmp);
-	tmp.st_dev = encode_dev(stat->dev);
+	tmp.st_dev = new_encode_dev(stat->dev);
 	tmp.st_ino = stat->ino;
 	if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
 		return -EOVERFLOW;
@@ -315,7 +314,7 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf)
 		return -EOVERFLOW;
 	SET_UID(tmp.st_uid, from_kuid_munged(current_user_ns(), stat->uid));
 	SET_GID(tmp.st_gid, from_kgid_munged(current_user_ns(), stat->gid));
-	tmp.st_rdev = encode_dev(stat->rdev);
+	tmp.st_rdev = new_encode_dev(stat->rdev);
 	tmp.st_size = stat->size;
 	tmp.st_atime = stat->atime.tv_sec;
 	tmp.st_mtime = stat->mtime.tv_sec;
@@ -588,11 +587,13 @@ static int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
 {
 	struct compat_stat tmp;
 
-	if (!old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev))
+	if (sizeof(tmp.st_dev) < 4 && !old_valid_dev(stat->dev))
+		return -EOVERFLOW;
+	if (sizeof(tmp.st_rdev) < 4 && !old_valid_dev(stat->rdev))
 		return -EOVERFLOW;
 
 	memset(&tmp, 0, sizeof(tmp));
-	tmp.st_dev = old_encode_dev(stat->dev);
+	tmp.st_dev = new_encode_dev(stat->dev);
 	tmp.st_ino = stat->ino;
 	if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
 		return -EOVERFLOW;
@@ -602,7 +603,7 @@ static int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
 		return -EOVERFLOW;
 	SET_UID(tmp.st_uid, from_kuid_munged(current_user_ns(), stat->uid));
 	SET_GID(tmp.st_gid, from_kgid_munged(current_user_ns(), stat->gid));
-	tmp.st_rdev = old_encode_dev(stat->rdev);
+	tmp.st_rdev = new_encode_dev(stat->rdev);
 	if ((u64) stat->size > MAX_NON_LFS)
 		return -EOVERFLOW;
 	tmp.st_size = stat->size;
-- 
2.35.1

[PATCH 4.19 29/53] ata: pata_marvell: Check the bmdma_addr beforing reading

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

commit aafa9f958342db36c17ac2a7f1b841032c96feb4 upstream.

Before detecting the cable type on the dma bar, the driver should check
whether the 'bmdma_addr' is zero, which means the adapter does not
support DMA, otherwise we will get the following error:

[    5.146634] Bad IO access at port 0x1 (return inb(port))
[    5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[    5.150856] RIP: 0010:ioread8+0x4a/0x60
[    5.160238] Call Trace:
[    5.160470]  <TASK>
[    5.160674]  marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[    5.161728]  ata_eh_recover+0x3520/0x6cc0
[    5.168075]  ata_do_eh+0x49/0x3c0

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/pata_marvell.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -82,6 +82,8 @@ static int marvell_cable_detect(struct a
 	switch(ap->port_no)
 	{
 	case 0:
+		if (!ap->ioaddr.bmdma_addr)
+			return ATA_CBL_PATA_UNK;
 		if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
 			return ATA_CBL_PATA40;
 		return ATA_CBL_PATA80;

[PATCH 4.19 30/53] dma: at_xdmac: fix a missing check on list iterator

[Greg Kroah-Hartman]

From: Xiaomeng Tong <xiam0nd.tong@gmail.com>

commit 206680c4e46b62fd8909385e0874a36952595b85 upstream.

The bug is here:
	__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);

The list iterator 'desc' will point to a bogus position containing
HEAD if the list is empty or no element is found. To avoid dev_dbg()
prints a invalid address, use a new variable 'iter' as the list
iterator, while use the origin variable 'desc' as a dedicated
pointer to point to the found element.

Cc: stable@vger.kernel.org
Fixes: 82e2424635f4c ("dmaengine: xdmac: fix print warning on dma_addr_t variable")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/at_xdmac.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1390,7 +1390,7 @@ at_xdmac_tx_status(struct dma_chan *chan
 {
 	struct at_xdmac_chan	*atchan = to_at_xdmac_chan(chan);
 	struct at_xdmac		*atxdmac = to_at_xdmac(atchan->chan.device);
-	struct at_xdmac_desc	*desc, *_desc;
+	struct at_xdmac_desc	*desc, *_desc, *iter;
 	struct list_head	*descs_list;
 	enum dma_status		ret;
 	int			residue, retry;
@@ -1505,11 +1505,13 @@ at_xdmac_tx_status(struct dma_chan *chan
 	 * microblock.
 	 */
 	descs_list = &desc->descs_list;
-	list_for_each_entry_safe(desc, _desc, descs_list, desc_node) {
-		dwidth = at_xdmac_get_dwidth(desc->lld.mbr_cfg);
-		residue -= (desc->lld.mbr_ubc & 0xffffff) << dwidth;
-		if ((desc->lld.mbr_nda & 0xfffffffc) == cur_nda)
+	list_for_each_entry_safe(iter, _desc, descs_list, desc_node) {
+		dwidth = at_xdmac_get_dwidth(iter->lld.mbr_cfg);
+		residue -= (iter->lld.mbr_ubc & 0xffffff) << dwidth;
+		if ((iter->lld.mbr_nda & 0xfffffffc) == cur_nda) {
+			desc = iter;
 			break;
+		}
 	}
 	residue += cur_ubc << dwidth;
 

[PATCH 4.19 31/53] drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

[Greg Kroah-Hartman]

From: Dave Stevenson <dave.stevenson@raspberrypi.com>

[ Upstream commit f92055ae0acb035891e988ce345d6b81a0316423 ]

If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe
fails before mipi_dsi_device_register_full is called, then
in trying to log the error message if uses ts->dsi->dev when
it is still NULL.

Use ts->i2c->dev instead, which is initialised earlier in probe.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index 06bd03915973..2073e0e43e2f 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -233,7 +233,7 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
 
 	ret = i2c_smbus_write_byte_data(ts->i2c, reg, val);
 	if (ret)
-		dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret);
+		dev_err(&ts->i2c->dev, "I2C write failed: %d\n", ret);
 }
 
 static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
-- 
2.35.1

[PATCH 4.19 32/53] drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

[Greg Kroah-Hartman]

From: Dave Stevenson <dave.stevenson@raspberrypi.com>

[ Upstream commit 5f18c0782b99e26121efa93d20b76c19e17aa1dd ]

The panel has a prepare call which is before video starts, and an
enable call which is after.
The Toshiba bridge should be configured before video, so move
the relevant power and initialisation calls to prepare.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index 2073e0e43e2f..f57eec47ef6a 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -269,7 +269,7 @@ static int rpi_touchscreen_noop(struct drm_panel *panel)
 	return 0;
 }
 
-static int rpi_touchscreen_enable(struct drm_panel *panel)
+static int rpi_touchscreen_prepare(struct drm_panel *panel)
 {
 	struct rpi_touchscreen *ts = panel_to_ts(panel);
 	int i;
@@ -299,6 +299,13 @@ static int rpi_touchscreen_enable(struct drm_panel *panel)
 	rpi_touchscreen_write(ts, DSI_STARTDSI, 0x01);
 	msleep(100);
 
+	return 0;
+}
+
+static int rpi_touchscreen_enable(struct drm_panel *panel)
+{
+	struct rpi_touchscreen *ts = panel_to_ts(panel);
+
 	/* Turn on the backlight. */
 	rpi_touchscreen_i2c_write(ts, REG_PWM, 255);
 
@@ -353,7 +360,7 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel)
 static const struct drm_panel_funcs rpi_touchscreen_funcs = {
 	.disable = rpi_touchscreen_disable,
 	.unprepare = rpi_touchscreen_noop,
-	.prepare = rpi_touchscreen_noop,
+	.prepare = rpi_touchscreen_prepare,
 	.enable = rpi_touchscreen_enable,
 	.get_modes = rpi_touchscreen_get_modes,
 };
-- 
2.35.1

[PATCH 4.19 33/53] powerpc/perf: Fix power9 event alternatives

[Greg Kroah-Hartman]

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit 0dcad700bb2776e3886fe0a645a4bf13b1e747cd ]

When scheduling a group of events, there are constraint checks done to
make sure all events can go in a group. Example, one of the criteria is
that events in a group cannot use the same PMC. But platform specific
PMU supports alternative event for some of the event codes. During
perf_event_open(), if any event group doesn't match constraint check
criteria, further lookup is done to find alternative event.

By current design, the array of alternatives events in PMU code is
expected to be sorted by column 0. This is because in
find_alternative() the return criteria is based on event code
comparison. ie. "event < ev_alt[i][0])". This optimisation is there
since find_alternative() can be called multiple times. In power9 PMU
code, the alternative event array is not sorted properly and hence there
is breakage in finding alternative events.

To work with existing logic, fix the alternative event array to be
sorted by column 0 for power9-pmu.c

Results:

With alternative events, multiplexing can be avoided. That is, for
example, in power9 PM_LD_MISS_L1 (0x3e054) has alternative event,
PM_LD_MISS_L1_ALT (0x400f0). This is an identical event which can be
programmed in a different PMC.

Before:

 # perf stat -e r3e054,r300fc

 Performance counter stats for 'system wide':

           1057860      r3e054              (50.21%)
               379      r300fc              (49.79%)

       0.944329741 seconds time elapsed

Since both the events are using PMC3 in this case, they are
multiplexed here.

After:

 # perf stat -e r3e054,r300fc

 Performance counter stats for 'system wide':

           1006948      r3e054
               182      r300fc

Fixes: 91e0bd1e6251 ("powerpc/perf: Add PM_LD_MISS_L1 and PM_BR_2PATH to power9 event list")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220419114828.89843-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/power9-pmu.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/perf/power9-pmu.c b/arch/powerpc/perf/power9-pmu.c
index c07b1615ee39..1aa083db77f1 100644
--- a/arch/powerpc/perf/power9-pmu.c
+++ b/arch/powerpc/perf/power9-pmu.c
@@ -143,11 +143,11 @@ int p9_dd22_bl_ev[] = {
 
 /* Table of alternatives, sorted by column 0 */
 static const unsigned int power9_event_alternatives[][MAX_ALT] = {
-	{ PM_INST_DISP,			PM_INST_DISP_ALT },
-	{ PM_RUN_CYC_ALT,		PM_RUN_CYC },
-	{ PM_RUN_INST_CMPL_ALT,		PM_RUN_INST_CMPL },
-	{ PM_LD_MISS_L1,		PM_LD_MISS_L1_ALT },
 	{ PM_BR_2PATH,			PM_BR_2PATH_ALT },
+	{ PM_INST_DISP,			PM_INST_DISP_ALT },
+	{ PM_RUN_CYC_ALT,               PM_RUN_CYC },
+	{ PM_LD_MISS_L1,                PM_LD_MISS_L1_ALT },
+	{ PM_RUN_INST_CMPL_ALT,         PM_RUN_INST_CMPL },
 };
 
 static int power9_get_alternatives(u64 event, unsigned int flags, u64 alt[])
-- 
2.35.1

[PATCH 4.19 34/53] openvswitch: fix OOB access in reserve_sfa_size()

[Greg Kroah-Hartman]

From: Paolo Valerio <pvalerio@redhat.com>

commit cefa91b2332d7009bc0be5d951d6cbbf349f90f8 upstream.

Given a sufficiently large number of actions, while copying and
reserving memory for a new action of a new flow, if next_offset is
greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does
not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE
bytes increasing actions_len by req_size. This can then lead to an OOB
write access, especially when further actions need to be copied.

Fix it by rearranging the flow action size check.

KASAN splat below:

==================================================================
BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch]
Write of size 65360 at addr ffff888147e4001c by task handler15/836

CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27
...
Call Trace:
 <TASK>
 dump_stack_lvl+0x45/0x5a
 print_report.cold+0x5e/0x5db
 ? __lock_text_start+0x8/0x8
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_report+0xb5/0x130
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_check_range+0xf5/0x1d0
 memcpy+0x39/0x60
 reserve_sfa_size+0x1ba/0x380 [openvswitch]
 __add_action+0x24/0x120 [openvswitch]
 ovs_nla_add_action+0xe/0x20 [openvswitch]
 ovs_ct_copy_action+0x29d/0x1130 [openvswitch]
 ? __kernel_text_address+0xe/0x30
 ? unwind_get_return_address+0x56/0xa0
 ? create_prof_cpu_mask+0x20/0x20
 ? ovs_ct_verify+0xf0/0xf0 [openvswitch]
 ? prep_compound_page+0x198/0x2a0
 ? __kasan_check_byte+0x10/0x40
 ? kasan_unpoison+0x40/0x70
 ? ksize+0x44/0x60
 ? reserve_sfa_size+0x75/0x380 [openvswitch]
 __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch]
 ? __zone_watermark_ok+0x420/0x420
 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch]
 ? __alloc_pages+0x1a9/0x3e0
 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0
 ? unwind_next_frame+0x991/0x1e40
 ? __mod_node_page_state+0x99/0x120
 ? __mod_lruvec_page_state+0x2e3/0x470
 ? __kasan_kmalloc_large+0x90/0xe0
 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch]
 ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch]
 ...

Cc: stable@vger.kernel.org
Fixes: f28cd2af22a0 ("openvswitch: fix flow actions reallocation")
Signed-off-by: Paolo Valerio <pvalerio@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/openvswitch/flow_netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/openvswitch/flow_netlink.c
+++ b/net/openvswitch/flow_netlink.c
@@ -2316,7 +2316,7 @@ static struct nlattr *reserve_sfa_size(s
 	new_acts_size = max(next_offset + req_size, ksize(*sfa) * 2);
 
 	if (new_acts_size > MAX_ACTIONS_BUFSIZE) {
-		if ((MAX_ACTIONS_BUFSIZE - next_offset) < req_size) {
+		if ((next_offset + req_size) > MAX_ACTIONS_BUFSIZE) {
 			OVS_NLERR(log, "Flow action size exceeds max %u",
 				  MAX_ACTIONS_BUFSIZE);
 			return ERR_PTR(-EMSGSIZE);

[PATCH 4.19 35/53] ASoC: soc-dapm: fix two incorrect uses of list iterator

[Greg Kroah-Hartman]

From: Xiaomeng Tong <xiam0nd.tong@gmail.com>

commit f730a46b931d894816af34a0ff8e4ad51565b39f upstream.

These two bug are here:
	list_for_each_entry_safe_continue(w, n, list,
					power_list);
	list_for_each_entry_safe_continue(w, n, list,
					power_list);

After the list_for_each_entry_safe_continue() exits, the list iterator
will always be a bogus pointer which point to an invalid struct objdect
containing HEAD member. The funciton poniter 'w->event' will be a
invalid value which can lead to a control-flow hijack if the 'w' can be
controlled.

The original intention was to continue the outer list_for_each_entry_safe()
loop with the same entry if w->event is NULL, but misunderstanding the
meaning of list_for_each_entry_safe_continue().

So just add a 'continue;' to fix the bug.

Cc: stable@vger.kernel.org
Fixes: 163cac061c973 ("ASoC: Factor out DAPM sequence execution")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220329012134.9375-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-dapm.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -1635,8 +1635,7 @@ static void dapm_seq_run(struct snd_soc_
 		switch (w->id) {
 		case snd_soc_dapm_pre:
 			if (!w->event)
-				list_for_each_entry_safe_continue(w, n, list,
-								  power_list);
+				continue;
 
 			if (event == SND_SOC_DAPM_STREAM_START)
 				ret = w->event(w,
@@ -1648,8 +1647,7 @@ static void dapm_seq_run(struct snd_soc_
 
 		case snd_soc_dapm_post:
 			if (!w->event)
-				list_for_each_entry_safe_continue(w, n, list,
-								  power_list);
+				continue;
 
 			if (event == SND_SOC_DAPM_STREAM_START)
 				ret = w->event(w,

[PATCH 4.19 36/53] e1000e: Fix possible overflow in LTR decoding

[Greg Kroah-Hartman]

From: Sasha Neftin <sasha.neftin@intel.com>

commit 04ebaa1cfddae5f240cc7404f009133bb0389a47 upstream.

When we decode the latency and the max_latency, u16 value may not fit
the required size and could lead to the wrong LTR representation.

Scaling is represented as:
scale 0 - 1         (2^(5*0)) = 2^0
scale 1 - 32        (2^(5 *1))= 2^5
scale 2 - 1024      (2^(5 *2)) =2^10
scale 3 - 32768     (2^(5 *3)) =2^15
scale 4 - 1048576   (2^(5 *4)) = 2^20
scale 5 - 33554432  (2^(5 *4)) = 2^25
scale 4 and scale 5 required 20 and 25 bits respectively.
scale 6 reserved.

Replace the u16 type with the u32 type and allow corrected LTR
representation.

Cc: stable@vger.kernel.org
Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M")
Reported-by: James Hutchinson <jahutchinson99@googlemail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -995,8 +995,8 @@ static s32 e1000_platform_pm_pch_lpt(str
 {
 	u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) |
 	    link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND;
-	u16 max_ltr_enc_d = 0;	/* maximum LTR decoded by platform */
-	u16 lat_enc_d = 0;	/* latency decoded */
+	u32 max_ltr_enc_d = 0;	/* maximum LTR decoded by platform */
+	u32 lat_enc_d = 0;	/* latency decoded */
 	u16 lat_enc = 0;	/* latency encoded */
 
 	if (link) {

[PATCH 4.19 37/53] ARC: entry: fix syscall_trace_exit argument

[Greg Kroah-Hartman]

From: Sergey Matyukevich <sergey.matyukevich@synopsys.com>

commit b1c6ecfdd06907554518ec384ce8e99889d15193 upstream.

Function syscall_trace_exit expects pointer to pt_regs. However
r0 is also used to keep syscall return value. Restore pointer
to pt_regs before calling syscall_trace_exit.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arc/kernel/entry.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -191,6 +191,7 @@ tracesys_exit:
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
 	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
 	; we'd done before calling post hook above

[PATCH 4.19 38/53] arm_pmu: Validate single/group leader events

[Greg Kroah-Hartman]

From: Rob Herring <robh@kernel.org>

commit e5c23779f93d45e39a52758ca593bd7e62e9b4be upstream.

In the case where there is only a cycle counter available (i.e.
PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open
should fail as the event can never possibly be scheduled. However, the
event validation when an event is opened is skipped when the group
leader is opened. Fix this by always validating the group leader events.

Reported-by: Al Grant <al.grant@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/perf/arm_pmu.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -321,6 +321,9 @@ validate_group(struct perf_event *event)
 	if (!validate_event(event->pmu, &fake_pmu, leader))
 		return -EINVAL;
 
+	if (event == leader)
+		return 0;
+
 	for_each_sibling_event(sibling, leader) {
 		if (!validate_event(event->pmu, &fake_pmu, sibling))
 			return -EINVAL;
@@ -418,12 +421,7 @@ __hw_perf_event_init(struct perf_event *
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
 
-	if (event->group_leader != event) {
-		if (validate_group(event) != 0)
-			return -EINVAL;
-	}
-
-	return 0;
+	return validate_group(event);
 }
 
 static int armpmu_event_init(struct perf_event *event)

[PATCH 4.19 39/53] ext4: fix symlink file size not match to file content

[Greg Kroah-Hartman]

From: Ye Bin <yebin10@huawei.com>

commit a2b0b205d125f27cddfb4f7280e39affdaf46686 upstream.

We got issue as follows:
[home]# fsck.ext4  -fn  ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0).
Fix? no

As the symlink file size does not match the file content. If the writeback
of the symlink data block failed, ext4_finish_bio() handles the end of IO.
However this function fails to mark the buffer with BH_write_io_error and
so when unmount does journal checkpoint it cannot detect the writeback
error and will cleanup the journal. Thus we've lost the correct data in the
journal area. To solve this issue, mark the buffer as BH_write_io_error in
ext4_finish_bio().

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321144438.201685-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/page-io.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -105,8 +105,10 @@ static void ext4_finish_bio(struct bio *
 				continue;
 			}
 			clear_buffer_async_write(bh);
-			if (bio->bi_status)
+			if (bio->bi_status) {
+				set_buffer_write_io_error(bh);
 				buffer_io_error(bh);
+			}
 		} while ((bh = bh->b_this_page) != head);
 		bit_spin_unlock(BH_Uptodate_Lock, &head->b_state);
 		local_irq_restore(flags);

[PATCH 4.19 40/53] ext4: limit length to bitmap_maxbytes - blocksize in punch_hole

[Greg Kroah-Hartman]

From: Tadeusz Struk <tadeusz.struk@linaro.org>

commit 2da376228a2427501feb9d15815a45dbdbdd753e upstream.

Syzbot found an issue [1] in ext4_fallocate().
The C reproducer [2] calls fallocate(), passing size 0xffeffeff000ul,
and offset 0x1000000ul, which, when added together exceed the
bitmap_maxbytes for the inode. This triggers a BUG in
ext4_ind_remove_space(). According to the comments in this function
the 'end' parameter needs to be one block after the last block to be
removed. In the case when the BUG is triggered it points to the last
block. Modify the ext4_punch_hole() function and add constraint that
caps the length to satisfy the one before laster block requirement.

LINK: [1] https://syzkaller.appspot.com/bug?id=b80bd9cf348aac724a4f4dff251800106d721331
LINK: [2] https://syzkaller.appspot.com/text?tag=ReproC&x=14ba0238700000

Fixes: a4bb6b64e39a ("ext4: enable "punch hole" functionality")
Reported-by: syzbot+7a806094edd5d07ba029@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220331200515.153214-1-tadeusz.struk@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inode.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4314,7 +4314,8 @@ int ext4_punch_hole(struct inode *inode,
 	struct super_block *sb = inode->i_sb;
 	ext4_lblk_t first_block, stop_block;
 	struct address_space *mapping = inode->i_mapping;
-	loff_t first_block_offset, last_block_offset;
+	loff_t first_block_offset, last_block_offset, max_length;
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	handle_t *handle;
 	unsigned int credits;
 	int ret = 0;
@@ -4360,6 +4361,14 @@ int ext4_punch_hole(struct inode *inode,
 		   offset;
 	}
 
+	/*
+	 * For punch hole the length + offset needs to be within one block
+	 * before last range. Adjust the length if it goes beyond that limit.
+	 */
+	max_length = sbi->s_bitmap_maxbytes - inode->i_sb->s_blocksize;
+	if (offset + length > max_length)
+		length = max_length - offset;
+
 	if (offset & (sb->s_blocksize - 1) ||
 	    (offset + length) & (sb->s_blocksize - 1)) {
 		/*

[PATCH 4.19 41/53] ext4: fix overhead calculation to account for the reserved gdt blocks

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 10b01ee92df52c8d7200afead4d5e5f55a5c58b1 upstream.

The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks.  With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3440,9 +3440,11 @@ static int count_overhead(struct super_b
 	ext4_fsblk_t		first_block, last_block, b;
 	ext4_group_t		i, ngroups = ext4_get_groups_count(sb);
 	int			s, j, count = 0;
+	int			has_super = ext4_bg_has_super(sb, grp);
 
 	if (!ext4_has_feature_bigalloc(sb))
-		return (ext4_bg_has_super(sb, grp) + ext4_bg_num_gdb(sb, grp) +
+		return (has_super + ext4_bg_num_gdb(sb, grp) +
+			(has_super ? le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) : 0) +
 			sbi->s_itb_per_group + 2);
 
 	first_block = le32_to_cpu(sbi->s_es->s_first_data_block) +

[PATCH 4.19 42/53] ext4: force overhead calculation if the s_overhead_cluster makes no sense

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 85d825dbf4899a69407338bae462a59aa9a37326 upstream.

If the file system does not use bigalloc, calculating the overhead is
cheap, so force the recalculation of the overhead so we don't have to
trust the precalculated overhead in the superblock.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4423,9 +4423,18 @@ no_journal:
 	 * Get the # of file system overhead blocks from the
 	 * superblock if present.
 	 */
-	if (es->s_overhead_clusters)
-		sbi->s_overhead = le32_to_cpu(es->s_overhead_clusters);
-	else {
+	sbi->s_overhead = le32_to_cpu(es->s_overhead_clusters);
+	/* ignore the precalculated value if it is ridiculous */
+	if (sbi->s_overhead > ext4_blocks_count(es))
+		sbi->s_overhead = 0;
+	/*
+	 * If the bigalloc feature is not enabled recalculating the
+	 * overhead doesn't take long, so we might as well just redo
+	 * it to make sure we are using the correct value.
+	 */
+	if (!ext4_has_feature_bigalloc(sb))
+		sbi->s_overhead = 0;
+	if (sbi->s_overhead == 0) {
 		err = ext4_calculate_overhead(sb);
 		if (err)
 			goto failed_mount_wq;

[PATCH 4.19 43/53] staging: ion: Prevent incorrect reference counting behavour

[Greg Kroah-Hartman]

Supply additional check in order to prevent unexpected results.

Fixes: b892bf75b2034 ("ion: Switch ion to use dma-buf")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/android/ion/ion.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -140,6 +140,9 @@ static void *ion_buffer_kmap_get(struct
 	void *vaddr;
 
 	if (buffer->kmap_cnt) {
+		if (buffer->kmap_cnt == INT_MAX)
+			return ERR_PTR(-EOVERFLOW);
+
 		buffer->kmap_cnt++;
 		return buffer->vaddr;
 	}

[PATCH 4.19 44/53] block/compat_ioctl: fix range check in BLKGETSIZE

[Greg Kroah-Hartman]

From: Khazhismel Kumykov <khazhy@google.com>

commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream.

kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.

This would result in truncation rather than EFBIG for 32bit mode for
large disks.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/compat_ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -391,7 +391,7 @@ long compat_blkdev_ioctl(struct file *fi
 		return 0;
 	case BLKGETSIZE:
 		size = i_size_read(bdev->bd_inode);
-		if ((size >> 9) > ~0UL)
+		if ((size >> 9) > ~(compat_ulong_t)0)
 			return -EFBIG;
 		return compat_put_ulong(arg, size >> 9);
 

[PATCH 4.19 45/53] ax25: add refcount in ax25_dev to avoid UAF bugs

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

commit d01ffb9eee4af165d83b08dd73ebdf9fe94a519b upstream.

If we dereference ax25_dev after we call kfree(ax25_dev) in
ax25_dev_device_down(), it will lead to concurrency UAF bugs.
There are eight syscall functions suffer from UAF bugs, include
ax25_bind(), ax25_release(), ax25_connect(), ax25_ioctl(),
ax25_getname(), ax25_sendmsg(), ax25_getsockopt() and
ax25_info_show().

One of the concurrency UAF can be shown as below:

  (USE)                       |    (FREE)
                              |  ax25_device_event
                              |    ax25_dev_device_down
ax25_bind                     |    ...
  ...                         |      kfree(ax25_dev)
  ax25_fillin_cb()            |    ...
    ax25_fillin_cb_from_dev() |
  ...                         |

The root cause of UAF bugs is that kfree(ax25_dev) in
ax25_dev_device_down() is not protected by any locks.
When ax25_dev, which there are still pointers point to,
is released, the concurrency UAF bug will happen.

This patch introduces refcount into ax25_dev in order to
guarantee that there are no pointers point to it when ax25_dev
is released.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 4.19: adjusted context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ax25.h    |   10 ++++++++++
 net/ax25/af_ax25.c    |    2 ++
 net/ax25/ax25_dev.c   |   12 ++++++++++--
 net/ax25/ax25_route.c |    3 +++
 4 files changed, 25 insertions(+), 2 deletions(-)

--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -236,6 +236,7 @@ typedef struct ax25_dev {
 #if defined(CONFIG_AX25_DAMA_SLAVE) || defined(CONFIG_AX25_DAMA_MASTER)
 	ax25_dama_info		dama;
 #endif
+	refcount_t		refcount;
 } ax25_dev;
 
 typedef struct ax25_cb {
@@ -290,6 +291,15 @@ static __inline__ void ax25_cb_put(ax25_
 	}
 }
 
+#define ax25_dev_hold(__ax25_dev) \
+	refcount_inc(&((__ax25_dev)->refcount))
+
+static __inline__ void ax25_dev_put(ax25_dev *ax25_dev)
+{
+	if (refcount_dec_and_test(&ax25_dev->refcount)) {
+		kfree(ax25_dev);
+	}
+}
 static inline __be16 ax25_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	skb->dev      = dev;
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -101,6 +101,7 @@ again:
 			spin_unlock_bh(&ax25_list_lock);
 			lock_sock(sk);
 			s->ax25_dev = NULL;
+			ax25_dev_put(ax25_dev);
 			release_sock(sk);
 			ax25_disconnect(s, ENETUNREACH);
 			spin_lock_bh(&ax25_list_lock);
@@ -449,6 +450,7 @@ static int ax25_ctl_ioctl(const unsigned
 	  }
 
 out_put:
+	ax25_dev_put(ax25_dev);
 	ax25_cb_put(ax25);
 	return ret;
 
--- a/net/ax25/ax25_dev.c
+++ b/net/ax25/ax25_dev.c
@@ -40,6 +40,7 @@ ax25_dev *ax25_addr_ax25dev(ax25_address
 	for (ax25_dev = ax25_dev_list; ax25_dev != NULL; ax25_dev = ax25_dev->next)
 		if (ax25cmp(addr, (ax25_address *)ax25_dev->dev->dev_addr) == 0) {
 			res = ax25_dev;
+			ax25_dev_hold(ax25_dev);
 		}
 	spin_unlock_bh(&ax25_dev_lock);
 
@@ -59,6 +60,7 @@ void ax25_dev_device_up(struct net_devic
 		return;
 	}
 
+	refcount_set(&ax25_dev->refcount, 1);
 	dev->ax25_ptr     = ax25_dev;
 	ax25_dev->dev     = dev;
 	dev_hold(dev);
@@ -86,6 +88,7 @@ void ax25_dev_device_up(struct net_devic
 	spin_lock_bh(&ax25_dev_lock);
 	ax25_dev->next = ax25_dev_list;
 	ax25_dev_list  = ax25_dev;
+	ax25_dev_hold(ax25_dev);
 	spin_unlock_bh(&ax25_dev_lock);
 
 	ax25_register_dev_sysctl(ax25_dev);
@@ -115,20 +118,22 @@ void ax25_dev_device_down(struct net_dev
 
 	if ((s = ax25_dev_list) == ax25_dev) {
 		ax25_dev_list = s->next;
+		ax25_dev_put(ax25_dev);
 		spin_unlock_bh(&ax25_dev_lock);
 		dev->ax25_ptr = NULL;
 		dev_put(dev);
-		kfree(ax25_dev);
+		ax25_dev_put(ax25_dev);
 		return;
 	}
 
 	while (s != NULL && s->next != NULL) {
 		if (s->next == ax25_dev) {
 			s->next = ax25_dev->next;
+			ax25_dev_put(ax25_dev);
 			spin_unlock_bh(&ax25_dev_lock);
 			dev->ax25_ptr = NULL;
 			dev_put(dev);
-			kfree(ax25_dev);
+			ax25_dev_put(ax25_dev);
 			return;
 		}
 
@@ -136,6 +141,7 @@ void ax25_dev_device_down(struct net_dev
 	}
 	spin_unlock_bh(&ax25_dev_lock);
 	dev->ax25_ptr = NULL;
+	ax25_dev_put(ax25_dev);
 }
 
 int ax25_fwd_ioctl(unsigned int cmd, struct ax25_fwd_struct *fwd)
@@ -152,6 +158,7 @@ int ax25_fwd_ioctl(unsigned int cmd, str
 		if (ax25_dev->forward != NULL)
 			return -EINVAL;
 		ax25_dev->forward = fwd_dev->dev;
+		ax25_dev_put(fwd_dev);
 		break;
 
 	case SIOCAX25DELFWD:
@@ -164,6 +171,7 @@ int ax25_fwd_ioctl(unsigned int cmd, str
 		return -EINVAL;
 	}
 
+	ax25_dev_put(ax25_dev);
 	return 0;
 }
 
--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -119,6 +119,7 @@ static int __must_check ax25_rt_add(stru
 	ax25_rt->dev          = ax25_dev->dev;
 	ax25_rt->digipeat     = NULL;
 	ax25_rt->ip_mode      = ' ';
+	ax25_dev_put(ax25_dev);
 	if (route->digi_count != 0) {
 		if ((ax25_rt->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
 			write_unlock_bh(&ax25_route_lock);
@@ -175,6 +176,7 @@ static int ax25_rt_del(struct ax25_route
 			}
 		}
 	}
+	ax25_dev_put(ax25_dev);
 	write_unlock_bh(&ax25_route_lock);
 
 	return 0;
@@ -217,6 +219,7 @@ static int ax25_rt_opt(struct ax25_route
 	}
 
 out:
+	ax25_dev_put(ax25_dev);
 	write_unlock_bh(&ax25_route_lock);
 	return err;
 }

[PATCH 4.19 46/53] ax25: fix reference count leaks of ax25_dev

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

commit 87563a043cef044fed5db7967a75741cc16ad2b1 upstream.

The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev
to avoid UAF bugs") introduces refcount into ax25_dev, but there
are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(),
ax25_rt_add(), ax25_rt_del() and ax25_rt_opt().

This patch uses ax25_dev_put() and adjusts the position of
ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev.

Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[OP: backport to 4.19: adjust context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ax25.h    |    8 +++++---
 net/ax25/af_ax25.c    |   12 ++++++++----
 net/ax25/ax25_dev.c   |   24 +++++++++++++++++-------
 net/ax25/ax25_route.c |   16 +++++++++++-----
 4 files changed, 41 insertions(+), 19 deletions(-)

--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -291,10 +291,12 @@ static __inline__ void ax25_cb_put(ax25_
 	}
 }
 
-#define ax25_dev_hold(__ax25_dev) \
-	refcount_inc(&((__ax25_dev)->refcount))
+static inline void ax25_dev_hold(ax25_dev *ax25_dev)
+{
+	refcount_inc(&ax25_dev->refcount);
+}
 
-static __inline__ void ax25_dev_put(ax25_dev *ax25_dev)
+static inline void ax25_dev_put(ax25_dev *ax25_dev)
 {
 	if (refcount_dec_and_test(&ax25_dev->refcount)) {
 		kfree(ax25_dev);
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -369,21 +369,25 @@ static int ax25_ctl_ioctl(const unsigned
 	if (copy_from_user(&ax25_ctl, arg, sizeof(ax25_ctl)))
 		return -EFAULT;
 
-	if ((ax25_dev = ax25_addr_ax25dev(&ax25_ctl.port_addr)) == NULL)
-		return -ENODEV;
-
 	if (ax25_ctl.digi_count > AX25_MAX_DIGIS)
 		return -EINVAL;
 
 	if (ax25_ctl.arg > ULONG_MAX / HZ && ax25_ctl.cmd != AX25_KILL)
 		return -EINVAL;
 
+	ax25_dev = ax25_addr_ax25dev(&ax25_ctl.port_addr);
+	if (!ax25_dev)
+		return -ENODEV;
+
 	digi.ndigi = ax25_ctl.digi_count;
 	for (k = 0; k < digi.ndigi; k++)
 		digi.calls[k] = ax25_ctl.digi_addr[k];
 
-	if ((ax25 = ax25_find_cb(&ax25_ctl.source_addr, &ax25_ctl.dest_addr, &digi, ax25_dev->dev)) == NULL)
+	ax25 = ax25_find_cb(&ax25_ctl.source_addr, &ax25_ctl.dest_addr, &digi, ax25_dev->dev);
+	if (!ax25) {
+		ax25_dev_put(ax25_dev);
 		return -ENOTCONN;
+	}
 
 	switch (ax25_ctl.cmd) {
 	case AX25_KILL:
--- a/net/ax25/ax25_dev.c
+++ b/net/ax25/ax25_dev.c
@@ -88,8 +88,8 @@ void ax25_dev_device_up(struct net_devic
 	spin_lock_bh(&ax25_dev_lock);
 	ax25_dev->next = ax25_dev_list;
 	ax25_dev_list  = ax25_dev;
-	ax25_dev_hold(ax25_dev);
 	spin_unlock_bh(&ax25_dev_lock);
+	ax25_dev_hold(ax25_dev);
 
 	ax25_register_dev_sysctl(ax25_dev);
 }
@@ -118,8 +118,8 @@ void ax25_dev_device_down(struct net_dev
 
 	if ((s = ax25_dev_list) == ax25_dev) {
 		ax25_dev_list = s->next;
-		ax25_dev_put(ax25_dev);
 		spin_unlock_bh(&ax25_dev_lock);
+		ax25_dev_put(ax25_dev);
 		dev->ax25_ptr = NULL;
 		dev_put(dev);
 		ax25_dev_put(ax25_dev);
@@ -129,8 +129,8 @@ void ax25_dev_device_down(struct net_dev
 	while (s != NULL && s->next != NULL) {
 		if (s->next == ax25_dev) {
 			s->next = ax25_dev->next;
-			ax25_dev_put(ax25_dev);
 			spin_unlock_bh(&ax25_dev_lock);
+			ax25_dev_put(ax25_dev);
 			dev->ax25_ptr = NULL;
 			dev_put(dev);
 			ax25_dev_put(ax25_dev);
@@ -153,25 +153,35 @@ int ax25_fwd_ioctl(unsigned int cmd, str
 
 	switch (cmd) {
 	case SIOCAX25ADDFWD:
-		if ((fwd_dev = ax25_addr_ax25dev(&fwd->port_to)) == NULL)
+		fwd_dev = ax25_addr_ax25dev(&fwd->port_to);
+		if (!fwd_dev) {
+			ax25_dev_put(ax25_dev);
 			return -EINVAL;
-		if (ax25_dev->forward != NULL)
+		}
+		if (ax25_dev->forward) {
+			ax25_dev_put(fwd_dev);
+			ax25_dev_put(ax25_dev);
 			return -EINVAL;
+		}
 		ax25_dev->forward = fwd_dev->dev;
 		ax25_dev_put(fwd_dev);
+		ax25_dev_put(ax25_dev);
 		break;
 
 	case SIOCAX25DELFWD:
-		if (ax25_dev->forward == NULL)
+		if (!ax25_dev->forward) {
+			ax25_dev_put(ax25_dev);
 			return -EINVAL;
+		}
 		ax25_dev->forward = NULL;
+		ax25_dev_put(ax25_dev);
 		break;
 
 	default:
+		ax25_dev_put(ax25_dev);
 		return -EINVAL;
 	}
 
-	ax25_dev_put(ax25_dev);
 	return 0;
 }
 
--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -78,11 +78,13 @@ static int __must_check ax25_rt_add(stru
 	ax25_dev *ax25_dev;
 	int i;
 
-	if ((ax25_dev = ax25_addr_ax25dev(&route->port_addr)) == NULL)
-		return -EINVAL;
 	if (route->digi_count > AX25_MAX_DIGIS)
 		return -EINVAL;
 
+	ax25_dev = ax25_addr_ax25dev(&route->port_addr);
+	if (!ax25_dev)
+		return -EINVAL;
+
 	write_lock_bh(&ax25_route_lock);
 
 	ax25_rt = ax25_route_list;
@@ -94,6 +96,7 @@ static int __must_check ax25_rt_add(stru
 			if (route->digi_count != 0) {
 				if ((ax25_rt->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
 					write_unlock_bh(&ax25_route_lock);
+					ax25_dev_put(ax25_dev);
 					return -ENOMEM;
 				}
 				ax25_rt->digipeat->lastrepeat = -1;
@@ -104,6 +107,7 @@ static int __must_check ax25_rt_add(stru
 				}
 			}
 			write_unlock_bh(&ax25_route_lock);
+			ax25_dev_put(ax25_dev);
 			return 0;
 		}
 		ax25_rt = ax25_rt->next;
@@ -111,6 +115,7 @@ static int __must_check ax25_rt_add(stru
 
 	if ((ax25_rt = kmalloc(sizeof(ax25_route), GFP_ATOMIC)) == NULL) {
 		write_unlock_bh(&ax25_route_lock);
+		ax25_dev_put(ax25_dev);
 		return -ENOMEM;
 	}
 
@@ -119,11 +124,11 @@ static int __must_check ax25_rt_add(stru
 	ax25_rt->dev          = ax25_dev->dev;
 	ax25_rt->digipeat     = NULL;
 	ax25_rt->ip_mode      = ' ';
-	ax25_dev_put(ax25_dev);
 	if (route->digi_count != 0) {
 		if ((ax25_rt->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
 			write_unlock_bh(&ax25_route_lock);
 			kfree(ax25_rt);
+			ax25_dev_put(ax25_dev);
 			return -ENOMEM;
 		}
 		ax25_rt->digipeat->lastrepeat = -1;
@@ -136,6 +141,7 @@ static int __must_check ax25_rt_add(stru
 	ax25_rt->next   = ax25_route_list;
 	ax25_route_list = ax25_rt;
 	write_unlock_bh(&ax25_route_lock);
+	ax25_dev_put(ax25_dev);
 
 	return 0;
 }
@@ -176,8 +182,8 @@ static int ax25_rt_del(struct ax25_route
 			}
 		}
 	}
-	ax25_dev_put(ax25_dev);
 	write_unlock_bh(&ax25_route_lock);
+	ax25_dev_put(ax25_dev);
 
 	return 0;
 }
@@ -219,8 +225,8 @@ static int ax25_rt_opt(struct ax25_route
 	}
 
 out:
-	ax25_dev_put(ax25_dev);
 	write_unlock_bh(&ax25_route_lock);
+	ax25_dev_put(ax25_dev);
 	return err;
 }
 

[PATCH 4.19 47/53] ax25: fix UAF bugs of net_device caused by rebinding operation

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

commit feef318c855a361a1eccd880f33e88c460eb63b4 upstream.

The ax25_kill_by_device() will set s->ax25_dev = NULL and
call ax25_disconnect() to change states of ax25_cb and
sock, if we call ax25_bind() before ax25_kill_by_device().

However, if we call ax25_bind() again between the window of
ax25_kill_by_device() and ax25_dev_device_down(), the values
and states changed by ax25_kill_by_device() will be reassigned.

Finally, ax25_dev_device_down() will deallocate net_device.
If we dereference net_device in syscall functions such as
ax25_release(), ax25_sendmsg(), ax25_getsockopt(), ax25_getname()
and ax25_info_show(), a UAF bug will occur.

One of the possible race conditions is shown below:

      (USE)                   |      (FREE)
ax25_bind()                   |
                              |  ax25_kill_by_device()
ax25_bind()                   |
ax25_connect()                |    ...
                              |  ax25_dev_device_down()
                              |    ...
                              |    dev_put_track(dev, ...) //FREE
ax25_release()                |    ...
  ax25_send_control()         |
    alloc_skb()      //USE    |

the corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in ax25_send_control+0x43/0x210
...
Call Trace:
  ...
  ax25_send_control+0x43/0x210
  ax25_release+0x2db/0x3b0
  __sock_release+0x6d/0x120
  sock_close+0xf/0x20
  __fput+0x11f/0x420
  ...
Allocated by task 1283:
  ...
  __kasan_kmalloc+0x81/0xa0
  alloc_netdev_mqs+0x5a/0x680
  mkiss_open+0x6c/0x380
  tty_ldisc_open+0x55/0x90
  ...
Freed by task 1969:
  ...
  kfree+0xa3/0x2c0
  device_release+0x54/0xe0
  kobject_put+0xa5/0x120
  tty_ldisc_kill+0x3e/0x80
  ...

In order to fix these UAF bugs caused by rebinding operation,
this patch adds dev_hold_track() into ax25_bind() and
corresponding dev_put_track() into ax25_kill_by_device().

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 4.19: adjust dev_put_track()->dev_put() and
dev_hold_track()->dev_hold()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -101,6 +101,7 @@ again:
 			spin_unlock_bh(&ax25_list_lock);
 			lock_sock(sk);
 			s->ax25_dev = NULL;
+			dev_put(ax25_dev->dev);
 			ax25_dev_put(ax25_dev);
 			release_sock(sk);
 			ax25_disconnect(s, ENETUNREACH);
@@ -1125,8 +1126,10 @@ static int ax25_bind(struct socket *sock
 		}
 	}
 
-	if (ax25_dev != NULL)
+	if (ax25_dev) {
 		ax25_fillin_cb(ax25, ax25_dev);
+		dev_hold(ax25_dev->dev);
+	}
 
 done:
 	ax25_cb_add(ax25);

[PATCH 4.19 48/53] ax25: Fix refcount leaks caused by ax25_cb_del()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

commit 9fd75b66b8f68498454d685dc4ba13192ae069b0 upstream.

The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev to
avoid UAF bugs") and commit feef318c855a ("ax25: fix UAF bugs of
net_device caused by rebinding operation") increase the refcounts of
ax25_dev and net_device in ax25_bind() and decrease the matching refcounts
in ax25_kill_by_device() in order to prevent UAF bugs, but there are
reference count leaks.

The root cause of refcount leaks is shown below:

     (Thread 1)                      |      (Thread 2)
ax25_bind()                          |
 ...                                 |
 ax25_addr_ax25dev()                 |
  ax25_dev_hold()   //(1)            |
  ...                                |
 dev_hold_track()   //(2)            |
 ...                                 | ax25_destroy_socket()
                                     |  ax25_cb_del()
                                     |   ...
                                     |   hlist_del_init() //(3)
                                     |
                                     |
     (Thread 3)                      |
ax25_kill_by_device()                |
 ...                                 |
 ax25_for_each(s, &ax25_list) {      |
  if (s->ax25_dev == ax25_dev) //(4) |
   ...                               |

Firstly, we use ax25_bind() to increase the refcount of ax25_dev in
position (1) and increase the refcount of net_device in position (2).
Then, we use ax25_cb_del() invoked by ax25_destroy_socket() to delete
ax25_cb in hlist in position (3) before calling ax25_kill_by_device().
Finally, the decrements of refcounts in ax25_kill_by_device() will not
be executed, because no s->ax25_dev equals to ax25_dev in position (4).

This patch adds decrements of refcounts in ax25_release() and use
lock_sock() to do synchronization. If refcounts decrease in ax25_release(),
the decrements of refcounts in ax25_kill_by_device() will not be
executed and vice versa.

Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Fixes: 87563a043cef ("ax25: fix reference count leaks of ax25_dev")
Fixes: feef318c855a ("ax25: fix UAF bugs of net_device caused by rebinding operation")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 4.19: adjust dev_put_track()->dev_put()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -101,8 +101,10 @@ again:
 			spin_unlock_bh(&ax25_list_lock);
 			lock_sock(sk);
 			s->ax25_dev = NULL;
-			dev_put(ax25_dev->dev);
-			ax25_dev_put(ax25_dev);
+			if (sk->sk_socket) {
+				dev_put(ax25_dev->dev);
+				ax25_dev_put(ax25_dev);
+			}
 			release_sock(sk);
 			ax25_disconnect(s, ENETUNREACH);
 			spin_lock_bh(&ax25_list_lock);
@@ -981,14 +983,20 @@ static int ax25_release(struct socket *s
 {
 	struct sock *sk = sock->sk;
 	ax25_cb *ax25;
+	ax25_dev *ax25_dev;
 
 	if (sk == NULL)
 		return 0;
 
 	sock_hold(sk);
-	sock_orphan(sk);
 	lock_sock(sk);
+	sock_orphan(sk);
 	ax25 = sk_to_ax25(sk);
+	ax25_dev = ax25->ax25_dev;
+	if (ax25_dev) {
+		dev_put(ax25_dev->dev);
+		ax25_dev_put(ax25_dev);
+	}
 
 	if (sk->sk_type == SOCK_SEQPACKET) {
 		switch (ax25->state) {

[PATCH 4.19 49/53] ax25: fix UAF bug in ax25_send_control()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

commit 5352a761308397a0e6250fdc629bb3f615b94747 upstream.

There are UAF bugs in ax25_send_control(), when we call ax25_release()
to deallocate ax25_dev. The possible race condition is shown below:

      (Thread 1)              |     (Thread 2)
ax25_dev_device_up() //(1)    |
                              | ax25_kill_by_device()
ax25_bind()          //(2)    |
ax25_connect()                | ...
 ax25->state = AX25_STATE_1   |
 ...                          | ax25_dev_device_down() //(3)

      (Thread 3)
ax25_release()                |
 ax25_dev_put()  //(4) FREE   |
 case AX25_STATE_1:           |
  ax25_send_control()         |
   alloc_skb()       //USE    |

The refcount of ax25_dev increases in position (1) and (2), and
decreases in position (3) and (4). The ax25_dev will be freed
before dereference sites in ax25_send_control().

The following is part of the report:

[  102.297448] BUG: KASAN: use-after-free in ax25_send_control+0x33/0x210
[  102.297448] Read of size 8 at addr ffff888009e6e408 by task ax25_close/602
[  102.297448] Call Trace:
[  102.303751]  ax25_send_control+0x33/0x210
[  102.303751]  ax25_release+0x356/0x450
[  102.305431]  __sock_release+0x6d/0x120
[  102.305431]  sock_close+0xf/0x20
[  102.305431]  __fput+0x11f/0x420
[  102.305431]  task_work_run+0x86/0xd0
[  102.307130]  get_signal+0x1075/0x1220
[  102.308253]  arch_do_signal_or_restart+0x1df/0xc00
[  102.308253]  exit_to_user_mode_prepare+0x150/0x1e0
[  102.308253]  syscall_exit_to_user_mode+0x19/0x50
[  102.308253]  do_syscall_64+0x48/0x90
[  102.308253]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  102.308253] RIP: 0033:0x405ae7

This patch defers the free operation of ax25_dev and net_device after
all corresponding dereference sites in ax25_release() to avoid UAF.

Fixes: 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[OP: backport to 4.19: adjust dev_put_track()->dev_put()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -993,10 +993,6 @@ static int ax25_release(struct socket *s
 	sock_orphan(sk);
 	ax25 = sk_to_ax25(sk);
 	ax25_dev = ax25->ax25_dev;
-	if (ax25_dev) {
-		dev_put(ax25_dev->dev);
-		ax25_dev_put(ax25_dev);
-	}
 
 	if (sk->sk_type == SOCK_SEQPACKET) {
 		switch (ax25->state) {
@@ -1058,6 +1054,10 @@ static int ax25_release(struct socket *s
 		sk->sk_state_change(sk);
 		ax25_destroy_socket(ax25);
 	}
+	if (ax25_dev) {
+		dev_put(ax25_dev->dev);
+		ax25_dev_put(ax25_dev);
+	}
 
 	sock->sk   = NULL;
 	release_sock(sk);

[PATCH 4.19 50/53] ax25: fix NPD bug in ax25_disconnect

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

commit 7ec02f5ac8a5be5a3f20611731243dc5e1d9ba10 upstream.

The ax25_disconnect() in ax25_kill_by_device() is not
protected by any locks, thus there is a race condition
between ax25_disconnect() and ax25_destroy_socket().
when ax25->sk is assigned as NULL by ax25_destroy_socket(),
a NULL pointer dereference bug will occur if site (1) or (2)
dereferences ax25->sk.

ax25_kill_by_device()                | ax25_release()
  ax25_disconnect()                  |   ax25_destroy_socket()
    ...                              |
    if(ax25->sk != NULL)             |     ...
      ...                            |     ax25->sk = NULL;
      bh_lock_sock(ax25->sk); //(1)  |     ...
      ...                            |
      bh_unlock_sock(ax25->sk); //(2)|

This patch moves ax25_disconnect() into lock_sock(), which can
synchronize with ax25_destroy_socket() in ax25_release().

Fail log:
===============================================================
BUG: kernel NULL pointer dereference, address: 0000000000000088
...
RIP: 0010:_raw_spin_lock+0x7e/0xd0
...
Call Trace:
ax25_disconnect+0xf6/0x220
ax25_device_event+0x187/0x250
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x17d/0x230
rollback_registered_many+0x1f1/0x950
unregister_netdevice_queue+0x133/0x200
unregister_netdev+0x13/0x20
...

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 4.19: adjust context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -105,8 +105,8 @@ again:
 				dev_put(ax25_dev->dev);
 				ax25_dev_put(ax25_dev);
 			}
-			release_sock(sk);
 			ax25_disconnect(s, ENETUNREACH);
+			release_sock(sk);
 			spin_lock_bh(&ax25_list_lock);
 			sock_put(sk);
 			/* The entry could have been deleted from the

[PATCH 4.19 51/53] ax25: Fix NULL pointer dereferences in ax25 timers

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

commit fc6d01ff9ef03b66d4a3a23b46fc3c3d8cf92009 upstream.

The previous commit 7ec02f5ac8a5 ("ax25: fix NPD bug in ax25_disconnect")
move ax25_disconnect into lock_sock() in order to prevent NPD bugs. But
there are race conditions that may lead to null pointer dereferences in
ax25_heartbeat_expiry(), ax25_t1timer_expiry(), ax25_t2timer_expiry(),
ax25_t3timer_expiry() and ax25_idletimer_expiry(), when we use
ax25_kill_by_device() to detach the ax25 device.

One of the race conditions that cause null pointer dereferences can be
shown as below:

      (Thread 1)                    |      (Thread 2)
ax25_connect()                      |
 ax25_std_establish_data_link()     |
  ax25_start_t1timer()              |
   mod_timer(&ax25->t1timer,..)     |
                                    | ax25_kill_by_device()
   (wait a time)                    |  ...
                                    |  s->ax25_dev = NULL; //(1)
   ax25_t1timer_expiry()            |
    ax25->ax25_dev->values[..] //(2)|  ...
     ...                            |

We set null to ax25_cb->ax25_dev in position (1) and dereference
the null pointer in position (2).

The corresponding fail log is shown below:
===============================================================
BUG: kernel NULL pointer dereference, address: 0000000000000050
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc6-00794-g45690b7d0
RIP: 0010:ax25_t1timer_expiry+0x12/0x40
...
Call Trace:
 call_timer_fn+0x21/0x120
 __run_timers.part.0+0x1ca/0x250
 run_timer_softirq+0x2c/0x60
 __do_softirq+0xef/0x2f3
 irq_exit_rcu+0xb6/0x100
 sysvec_apic_timer_interrupt+0xa2/0xd0
...

This patch moves ax25_disconnect() before s->ax25_dev = NULL
and uses del_timer_sync() to delete timers in ax25_disconnect().
If ax25_disconnect() is called by ax25_kill_by_device() or
ax25->ax25_dev is NULL, the reason in ax25_disconnect() will be
equal to ENETUNREACH, it will wait all timers to stop before we
set null to s->ax25_dev in ax25_kill_by_device().

Fixes: 7ec02f5ac8a5 ("ax25: fix NPD bug in ax25_disconnect")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 4.19: adjust context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c   |    4 ++--
 net/ax25/ax25_subr.c |   20 ++++++++++++++------
 2 files changed, 16 insertions(+), 8 deletions(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -92,20 +92,20 @@ again:
 			sk = s->sk;
 			if (!sk) {
 				spin_unlock_bh(&ax25_list_lock);
-				s->ax25_dev = NULL;
 				ax25_disconnect(s, ENETUNREACH);
+				s->ax25_dev = NULL;
 				spin_lock_bh(&ax25_list_lock);
 				goto again;
 			}
 			sock_hold(sk);
 			spin_unlock_bh(&ax25_list_lock);
 			lock_sock(sk);
+			ax25_disconnect(s, ENETUNREACH);
 			s->ax25_dev = NULL;
 			if (sk->sk_socket) {
 				dev_put(ax25_dev->dev);
 				ax25_dev_put(ax25_dev);
 			}
-			ax25_disconnect(s, ENETUNREACH);
 			release_sock(sk);
 			spin_lock_bh(&ax25_list_lock);
 			sock_put(sk);
--- a/net/ax25/ax25_subr.c
+++ b/net/ax25/ax25_subr.c
@@ -264,12 +264,20 @@ void ax25_disconnect(ax25_cb *ax25, int
 {
 	ax25_clear_queues(ax25);
 
-	if (!ax25->sk || !sock_flag(ax25->sk, SOCK_DESTROY))
-		ax25_stop_heartbeat(ax25);
-	ax25_stop_t1timer(ax25);
-	ax25_stop_t2timer(ax25);
-	ax25_stop_t3timer(ax25);
-	ax25_stop_idletimer(ax25);
+	if (reason == ENETUNREACH) {
+		del_timer_sync(&ax25->timer);
+		del_timer_sync(&ax25->t1timer);
+		del_timer_sync(&ax25->t2timer);
+		del_timer_sync(&ax25->t3timer);
+		del_timer_sync(&ax25->idletimer);
+	} else {
+		if (!ax25->sk || !sock_flag(ax25->sk, SOCK_DESTROY))
+			ax25_stop_heartbeat(ax25);
+		ax25_stop_t1timer(ax25);
+		ax25_stop_t2timer(ax25);
+		ax25_stop_t3timer(ax25);
+		ax25_stop_idletimer(ax25);
+	}
 
 	ax25->state = AX25_STATE_0;
 

[PATCH 4.19 52/53] ax25: Fix UAF bugs in ax25 timers

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

commit 82e31755e55fbcea6a9dfaae5fe4860ade17cbc0 upstream.

There are race conditions that may lead to UAF bugs in
ax25_heartbeat_expiry(), ax25_t1timer_expiry(), ax25_t2timer_expiry(),
ax25_t3timer_expiry() and ax25_idletimer_expiry(), when we call
ax25_release() to deallocate ax25_dev.

One of the UAF bugs caused by ax25_release() is shown below:

      (Thread 1)                    |      (Thread 2)
ax25_dev_device_up() //(1)          |
...                                 | ax25_kill_by_device()
ax25_bind()          //(2)          |
ax25_connect()                      | ...
 ax25_std_establish_data_link()     |
  ax25_start_t1timer()              | ax25_dev_device_down() //(3)
   mod_timer(&ax25->t1timer,..)     |
                                    | ax25_release()
   (wait a time)                    |  ...
                                    |  ax25_dev_put(ax25_dev) //(4)FREE
   ax25_t1timer_expiry()            |
    ax25->ax25_dev->values[..] //USE|  ...
     ...                            |

We increase the refcount of ax25_dev in position (1) and (2), and
decrease the refcount of ax25_dev in position (3) and (4).
The ax25_dev will be freed in position (4) and be used in
ax25_t1timer_expiry().

The fail log is shown below:
==============================================================

[  106.116942] BUG: KASAN: use-after-free in ax25_t1timer_expiry+0x1c/0x60
[  106.116942] Read of size 8 at addr ffff88800bda9028 by task swapper/0/0
[  106.116942] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-06123-g0905eec574
[  106.116942] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-14
[  106.116942] Call Trace:
...
[  106.116942]  ax25_t1timer_expiry+0x1c/0x60
[  106.116942]  call_timer_fn+0x122/0x3d0
[  106.116942]  __run_timers.part.0+0x3f6/0x520
[  106.116942]  run_timer_softirq+0x4f/0xb0
[  106.116942]  __do_softirq+0x1c2/0x651
...

This patch adds del_timer_sync() in ax25_release(), which could ensure
that all timers stop before we deallocate ax25_dev.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[OP: backport to 4.19: adjust context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1055,6 +1055,11 @@ static int ax25_release(struct socket *s
 		ax25_destroy_socket(ax25);
 	}
 	if (ax25_dev) {
+		del_timer_sync(&ax25->timer);
+		del_timer_sync(&ax25->t1timer);
+		del_timer_sync(&ax25->t2timer);
+		del_timer_sync(&ax25->t3timer);
+		del_timer_sync(&ax25->idletimer);
 		dev_put(ax25_dev->dev);
 		ax25_dev_put(ax25_dev);
 	}

[PATCH 4.19 53/53] Revert "net: micrel: fix KS8851_MLL Kconfig"

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

This reverts commit 05b4c37fca84976ab9e3873d36fe53cd88d45408 which is
commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a upstream.

The upstream commit c3efcedd272a ("net: micrel: fix KS8851_MLL Kconfig")
depends on e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")
which is not part of Linux 4.19.y . Revert the aforementioned commit to
prevent breakage in 4.19.y .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/micrel/Kconfig |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -45,7 +45,6 @@ config KS8851
 config KS8851_MLL
 	tristate "Micrel KS8851 MLL"
 	depends on HAS_IOMEM
-	depends on PTP_1588_CLOCK_OPTIONAL
 	select MII
 	---help---
 	  This platform driver is for Micrel KS8851 Address/data bus

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review

[Jon Hunter]

On Tue, 26 Apr 2022 10:20:40 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.240 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.240-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:
    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version:	4.19.240-rc1-g5e5c9d690926
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 5473 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.240 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
> Anything received after that time might be too late.

I still see problems on socfpga:

[    1.227759]  mmcblk0: p1 p2 p3
[    1.269825] Micrel KSZ9031 Gigabit PHY stmmac-0:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    1.284600] socfpga-dwmac ff702000.ethernet eth0: No Safety Features support found
[    1.292374] socfpga-dwmac ff702000.ethernet eth0: registered PTP clock
[    1.299247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.444552] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    5.452609] pgd = (ptrval)
[    5.455322] [00000000] *pgd=00000000
[    5.458890] Internal error: Oops: 805 [#1] SMP ARM
[    5.463660] Modules linked in:
[    5.466708] CPU: 0 PID: 766 Comm: kworker/0:2 Not tainted 4.19.240-rc1-g5e5c9d690926 #1
[    5.474674] Hardware name: Altera SOCFPGA
[    5.478679] Workqueue: events_power_efficient phy_state_machine
[    5.484579] PC is at socfpga_dwmac_fix_mac_speed+0x3c/0xbc
[    5.490044] LR is at arm_heavy_mb+0x2c/0x48
[    5.494208] pc : [<c05d9a2c>]    lr : [<c01182e8>]    psr: 60000013
[    5.500446] sp : ee84de58  ip : ee84de48  fp : ee84de7c
[    5.505648] r10: 00000001  r9 : ee8fb800  r8 : 00000000
[    5.510848] r7 : 00000000  r6 : 000003e8  r5 : eebe4000  r4 : eeb0a880
[    5.517343] r3 : 00000001  r2 : 00000730  r1 : 00000000  r0 : eeb0a880
[    5.523842] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    5.530945] Control: 10c5387d  Table: 0000404a  DAC: 00000051
[    5.536665] Process kworker/0:2 (pid: 766, stack limit = 0x(ptrval))
[    5.542989] Stack: (0xee84de58 to 0xee84e000)
[    5.547328] de40:                                                       ee8fb800 eebe4000
[    5.555470] de60: eebe5000 eebe4538 00610c8c eebe4500 ee84deb4 ee84de80 c05cd084 c05d99fc
[    5.563613] de80: c07058f0 c018fabc eebe4000 ee8fb800 eebe4000 ee8fba90 00000000 00000000
[    5.571756] dea0: c0c77830 00000000 ee84decc ee84deb8 c05baf3c c05ccef0 ee8fba64 ee8fb800
[    5.579899] dec0: ee84def4 ee84ded0 c05b921c c05baf08 ee8fba64 ef1cda80 ef7d2fc0 ef7d6500
[    5.588041] dee0: 00000000 c0c77830 ee84df34 ee84def8 c013e18c c05b8ee0 ef7d2fc0 ef7d2fc0
[    5.596183] df00: 00000008 ef7d2fd8 c0c02d00 ef1cda80 ef1cda94 ef7d2fc0 00000008 ef7d2fd8
[    5.604327] df20: c0c02d00 ef7d2fc0 ee84df74 ee84df38 c013f178 c013df74 c013f118 c09e2128
[    5.612469] df40: c0c77250 ffffe000 ee84df74 ef375140 ef3b9900 00000000 ee84c000 ef1cda80
[    5.620612] df60: c013f118 ef127e74 ee84dfac ee84df78 c0144ac8 c013f124 ef37515c ef37515c
[    5.628754] df80: ee84dfac ef3b9900 c014495c 00000000 00000000 00000000 00000000 00000000
[    5.636896] dfa0: 00000000 ee84dfb0 c01010e8 c0144968 00000000 00000000 00000000 00000000
[    5.645038] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    5.653180] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    5.661317] Backtrace: 
[    5.663767] [<c05d99f0>] (socfpga_dwmac_fix_mac_speed) from [<c05cd084>] (stmmac_adjust_link+0x1a0/0x21c)
[    5.673294]  r9:eebe4500 r8:00610c8c r7:eebe4538 r6:eebe5000 r5:eebe4000 r4:ee8fb800
[    5.681009] [<c05ccee4>] (stmmac_adjust_link) from [<c05baf3c>] (phy_link_change+0x40/0x4c)
[    5.689323]  r10:00000000 r9:c0c77830 r8:00000000 r7:00000000 r6:ee8fba90 r5:eebe4000
[    5.697116]  r4:ee8fb800
[    5.699644] [<c05baefc>] (phy_link_change) from [<c05b921c>] (phy_state_machine+0x348/0x580)
[    5.708042]  r5:ee8fb800 r4:ee8fba64
[    5.711610] [<c05b8ed4>] (phy_state_machine) from [<c013e18c>] (process_one_work+0x224/0x518)
[    5.720098]  r9:c0c77830 r8:00000000 r7:ef7d6500 r6:ef7d2fc0 r5:ef1cda80 r4:ee8fba64
[    5.727811] [<c013df68>] (process_one_work) from [<c013f178>] (worker_thread+0x60/0x5ac)
[    5.735866]  r10:ef7d2fc0 r9:c0c02d00 r8:ef7d2fd8 r7:00000008 r6:ef7d2fc0 r5:ef1cda94
[    5.743658]  r4:ef1cda80
[    5.746187] [<c013f118>] (worker_thread) from [<c0144ac8>] (kthread+0x16c/0x174)
[    5.753551]  r10:ef127e74 r9:c013f118 r8:ef1cda80 r7:ee84c000 r6:00000000 r5:ef3b9900
[    5.761342]  r4:ef375140
[    5.763869] [<c014495c>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[    5.771057] Exception stack(0xee84dfb0 to 0xee84dff8)
[    5.776087] dfa0:                                     00000000 00000000 00000000 00000000
[    5.784229] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    5.792370] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    5.798955]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014495c
[    5.806747]  r4:ef3b9900
[    5.809273] Code: e59394b8 f57ff04e ebecfa24 e3a03001 (e1c830b0) 
[    5.815374] ---[ end trace 922ea6407635ba6b ]---

https://lava.ciplatform.org/scheduler/job/669257
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/2377419824

Best regards,
									Pavel
										
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review

[Greg Kroah-Hartman]

On Tue, Apr 26, 2022 at 10:00:00PM +0200, Pavel Machek wrote:
> Hi!
> 
> > This is the start of the stable review cycle for the 4.19.240 release.
> > There are 53 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
> > Anything received after that time might be too late.
> 
> I still see problems on socfpga:
> 
> [    1.227759]  mmcblk0: p1 p2 p3
> [    1.269825] Micrel KSZ9031 Gigabit PHY stmmac-0:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
> [    1.284600] socfpga-dwmac ff702000.ethernet eth0: No Safety Features support found
> [    1.292374] socfpga-dwmac ff702000.ethernet eth0: registered PTP clock
> [    1.299247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [    5.444552] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> [    5.452609] pgd = (ptrval)
> [    5.455322] [00000000] *pgd=00000000
> [    5.458890] Internal error: Oops: 805 [#1] SMP ARM
> [    5.463660] Modules linked in:
> [    5.466708] CPU: 0 PID: 766 Comm: kworker/0:2 Not tainted 4.19.240-rc1-g5e5c9d690926 #1
> [    5.474674] Hardware name: Altera SOCFPGA
> [    5.478679] Workqueue: events_power_efficient phy_state_machine
> [    5.484579] PC is at socfpga_dwmac_fix_mac_speed+0x3c/0xbc
> [    5.490044] LR is at arm_heavy_mb+0x2c/0x48
> [    5.494208] pc : [<c05d9a2c>]    lr : [<c01182e8>]    psr: 60000013
> [    5.500446] sp : ee84de58  ip : ee84de48  fp : ee84de7c
> [    5.505648] r10: 00000001  r9 : ee8fb800  r8 : 00000000
> [    5.510848] r7 : 00000000  r6 : 000003e8  r5 : eebe4000  r4 : eeb0a880
> [    5.517343] r3 : 00000001  r2 : 00000730  r1 : 00000000  r0 : eeb0a880
> [    5.523842] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
> [    5.530945] Control: 10c5387d  Table: 0000404a  DAC: 00000051
> [    5.536665] Process kworker/0:2 (pid: 766, stack limit = 0x(ptrval))
> [    5.542989] Stack: (0xee84de58 to 0xee84e000)
> [    5.547328] de40:                                                       ee8fb800 eebe4000
> [    5.555470] de60: eebe5000 eebe4538 00610c8c eebe4500 ee84deb4 ee84de80 c05cd084 c05d99fc
> [    5.563613] de80: c07058f0 c018fabc eebe4000 ee8fb800 eebe4000 ee8fba90 00000000 00000000
> [    5.571756] dea0: c0c77830 00000000 ee84decc ee84deb8 c05baf3c c05ccef0 ee8fba64 ee8fb800
> [    5.579899] dec0: ee84def4 ee84ded0 c05b921c c05baf08 ee8fba64 ef1cda80 ef7d2fc0 ef7d6500
> [    5.588041] dee0: 00000000 c0c77830 ee84df34 ee84def8 c013e18c c05b8ee0 ef7d2fc0 ef7d2fc0
> [    5.596183] df00: 00000008 ef7d2fd8 c0c02d00 ef1cda80 ef1cda94 ef7d2fc0 00000008 ef7d2fd8
> [    5.604327] df20: c0c02d00 ef7d2fc0 ee84df74 ee84df38 c013f178 c013df74 c013f118 c09e2128
> [    5.612469] df40: c0c77250 ffffe000 ee84df74 ef375140 ef3b9900 00000000 ee84c000 ef1cda80
> [    5.620612] df60: c013f118 ef127e74 ee84dfac ee84df78 c0144ac8 c013f124 ef37515c ef37515c
> [    5.628754] df80: ee84dfac ef3b9900 c014495c 00000000 00000000 00000000 00000000 00000000
> [    5.636896] dfa0: 00000000 ee84dfb0 c01010e8 c0144968 00000000 00000000 00000000 00000000
> [    5.645038] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [    5.653180] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
> [    5.661317] Backtrace: 
> [    5.663767] [<c05d99f0>] (socfpga_dwmac_fix_mac_speed) from [<c05cd084>] (stmmac_adjust_link+0x1a0/0x21c)
> [    5.673294]  r9:eebe4500 r8:00610c8c r7:eebe4538 r6:eebe5000 r5:eebe4000 r4:ee8fb800
> [    5.681009] [<c05ccee4>] (stmmac_adjust_link) from [<c05baf3c>] (phy_link_change+0x40/0x4c)
> [    5.689323]  r10:00000000 r9:c0c77830 r8:00000000 r7:00000000 r6:ee8fba90 r5:eebe4000
> [    5.697116]  r4:ee8fb800
> [    5.699644] [<c05baefc>] (phy_link_change) from [<c05b921c>] (phy_state_machine+0x348/0x580)
> [    5.708042]  r5:ee8fb800 r4:ee8fba64
> [    5.711610] [<c05b8ed4>] (phy_state_machine) from [<c013e18c>] (process_one_work+0x224/0x518)
> [    5.720098]  r9:c0c77830 r8:00000000 r7:ef7d6500 r6:ef7d2fc0 r5:ef1cda80 r4:ee8fba64
> [    5.727811] [<c013df68>] (process_one_work) from [<c013f178>] (worker_thread+0x60/0x5ac)
> [    5.735866]  r10:ef7d2fc0 r9:c0c02d00 r8:ef7d2fd8 r7:00000008 r6:ef7d2fc0 r5:ef1cda94
> [    5.743658]  r4:ef1cda80
> [    5.746187] [<c013f118>] (worker_thread) from [<c0144ac8>] (kthread+0x16c/0x174)
> [    5.753551]  r10:ef127e74 r9:c013f118 r8:ef1cda80 r7:ee84c000 r6:00000000 r5:ef3b9900
> [    5.761342]  r4:ef375140
> [    5.763869] [<c014495c>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
> [    5.771057] Exception stack(0xee84dfb0 to 0xee84dff8)
> [    5.776087] dfa0:                                     00000000 00000000 00000000 00000000
> [    5.784229] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [    5.792370] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [    5.798955]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014495c
> [    5.806747]  r4:ef3b9900
> [    5.809273] Code: e59394b8 f57ff04e ebecfa24 e3a03001 (e1c830b0) 
> [    5.815374] ---[ end trace 922ea6407635ba6b ]---
> 
> https://lava.ciplatform.org/scheduler/job/669257
> https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/2377419824

Can you run git bisect?

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review [net: ethernet: stmmac: fix altr_tse_pcs function when using a]

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1703 bytes --]

Hi!

> > > This is the start of the stable review cycle for the 4.19.240 release.
> > > There are 53 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
...
> > I still see problems on socfpga:
> > 
> > [    1.227759]  mmcblk0: p1 p2 p3
> > [    1.269825] Micrel KSZ9031 Gigabit PHY stmmac-0:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
> > [    1.284600] socfpga-dwmac ff702000.ethernet eth0: No Safety Features support found
> > [    1.292374] socfpga-dwmac ff702000.ethernet eth0: registered PTP clock
> > [    1.299247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> > [    5.444552] Unable to handle kernel NULL pointer dereference at virtual address 00000000
...
> > [    5.478679] Workqueue: events_power_efficient phy_state_machine
> > [    5.484579] PC is at socfpga_dwmac_fix_mac_speed+0x3c/0xbc
> > [    5.490044] LR is at arm_heavy_mb+0x2c/0x48

> > https://lava.ciplatform.org/scheduler/job/669257
> > https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/2377419824
> 
> Can you run git bisect?

Not a bisect, but we guessed e2423aa174e6 was responsible, and tested
it boots with that patch reverted.

Best regards,
								Pavel

commit e2423aa174e6c3e9805e96db778245ba73cdd88c

    net: ethernet: stmmac: fix altr_tse_pcs function when using a
    fixed-link

    [ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ]
    
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review [net: ethernet: stmmac: fix altr_tse_pcs function when using a]

[Greg Kroah-Hartman]

On Fri, Apr 29, 2022 at 09:43:41AM +0200, Pavel Machek wrote:
> Hi!
> 
> > > > This is the start of the stable review cycle for the 4.19.240 release.
> > > > There are 53 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> ...
> > > I still see problems on socfpga:
> > > 
> > > [    1.227759]  mmcblk0: p1 p2 p3
> > > [    1.269825] Micrel KSZ9031 Gigabit PHY stmmac-0:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
> > > [    1.284600] socfpga-dwmac ff702000.ethernet eth0: No Safety Features support found
> > > [    1.292374] socfpga-dwmac ff702000.ethernet eth0: registered PTP clock
> > > [    1.299247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> > > [    5.444552] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> ...
> > > [    5.478679] Workqueue: events_power_efficient phy_state_machine
> > > [    5.484579] PC is at socfpga_dwmac_fix_mac_speed+0x3c/0xbc
> > > [    5.490044] LR is at arm_heavy_mb+0x2c/0x48
> 
> > > https://lava.ciplatform.org/scheduler/job/669257
> > > https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/2377419824
> > 
> > Can you run git bisect?
> 
> Not a bisect, but we guessed e2423aa174e6 was responsible, and tested
> it boots with that patch reverted.
> 
> Best regards,
> 								Pavel
> 
> commit e2423aa174e6c3e9805e96db778245ba73cdd88c
> 
>     net: ethernet: stmmac: fix altr_tse_pcs function when using a
>     fixed-link
> 
>     [ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ]
>     

Thanks, now reverted from 4.19.y, 4.14.y, and 4.9.y

greg k-h

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review [net: ethernet: stmmac: fix altr_tse_pcs function when using a]

[Dinh Nguyen]

On 4/29/22 04:22, Greg Kroah-Hartman wrote:
> On Fri, Apr 29, 2022 at 09:43:41AM +0200, Pavel Machek wrote:
>> Hi!
>>
>>>>> This is the start of the stable review cycle for the 4.19.240 release.
>>>>> There are 53 patches in this series, all will be posted as a response
>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>> let me know.
>> ...
>>>> I still see problems on socfpga:
>>>>
>>>> [    1.227759]  mmcblk0: p1 p2 p3
>>>> [    1.269825] Micrel KSZ9031 Gigabit PHY stmmac-0:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
>>>> [    1.284600] socfpga-dwmac ff702000.ethernet eth0: No Safety Features support found
>>>> [    1.292374] socfpga-dwmac ff702000.ethernet eth0: registered PTP clock
>>>> [    1.299247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>> [    5.444552] Unable to handle kernel NULL pointer dereference at virtual address 00000000
>> ...
>>>> [    5.478679] Workqueue: events_power_efficient phy_state_machine
>>>> [    5.484579] PC is at socfpga_dwmac_fix_mac_speed+0x3c/0xbc
>>>> [    5.490044] LR is at arm_heavy_mb+0x2c/0x48
>>
>>>> https://lava.ciplatform.org/scheduler/job/669257
>>>> https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/2377419824
>>>
>>> Can you run git bisect?
>>
>> Not a bisect, but we guessed e2423aa174e6 was responsible, and tested
>> it boots with that patch reverted.
>>
>> Best regards,
>> 								Pavel
>>
>> commit e2423aa174e6c3e9805e96db778245ba73cdd88c
>>
>>      net: ethernet: stmmac: fix altr_tse_pcs function when using a
>>      fixed-link
>>
>>      [ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ]
>>      
> 
> Thanks, now reverted from 4.19.y, 4.14.y, and 4.9.y
> 

I have fixed this with this patch that is in linux-next:

5fd1fe4807f9 ("net: ethernet: stmmac: fix write to sgmii_adapter_base")

Dinh

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review [net: ethernet: stmmac: fix altr_tse_pcs function when using a]

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 653 bytes --]

Hi!

> > > Can you run git bisect?
> > 
> > Not a bisect, but we guessed e2423aa174e6 was responsible, and tested
> > it boots with that patch reverted.
> > 
> > commit e2423aa174e6c3e9805e96db778245ba73cdd88c
> > 
> >     net: ethernet: stmmac: fix altr_tse_pcs function when using a
> >     fixed-link
> > 
> >     [ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ]
> >     
> 
> Thanks, now reverted from 4.19.y, 4.14.y, and 4.9.y

Thank you!

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review

[Guenter Roeck]

On Tue, Apr 26, 2022 at 10:20:40AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.240 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 425 pass: 425 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review

[Shuah Khan]

On 4/26/22 2:20 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.240 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.240-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review

[Samuel Zou]

On 2022/4/26 16:20, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.240 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.240-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 4.19.240-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.240-rc1
Commit: 5e5c9d690926bf43bc1405d163e02768a56c56dc
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8960
passed: 8960
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8960
passed: 8960
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review

[Naresh Kamboju]

On Tue, 26 Apr 2022 at 13:57, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.240 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.240-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.240-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.19.y
* git commit: 5e5c9d690926bf43bc1405d163e02768a56c56dc
* git describe: v4.19.239-54-g5e5c9d690926
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.239-54-g5e5c9d690926

## Test Regressions (compared to v4.19.239)
No test regressions found.

## Metric Regressions (compared to v4.19.239)
No metric regressions found.

## Test Fixes (compared to v4.19.239)
No test fixes found.

## Metric Fixes (compared to v4.19.239)
No metric fixes found.

## Test result summary
total: 81844, pass: 65248, fail: 1145, skip: 13273, xfail: 2178

## Build Summary
* arm: 281 total, 275 passed, 6 failed
* arm64: 39 total, 39 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 27 total, 27 passed, 0 failed
* powerpc: 60 total, 54 passed, 6 failed
* s390: 12 total, 12 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 38 total, 38 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/53] 4.19.240-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Tue, Apr 26, 2022 at 10:20:40AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.240 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220408): 63 configs -> no  failure
arm (gcc version 11.2.1 20220408): 116 configs -> no new failure
arm64 (gcc version 11.2.1 20220408): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20220408): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/1065


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip