From: Jerome Glisse <jglisse@redhat.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
John Hubbard <jhubbard@nvidia.com>,
Dan Williams <dan.j.williams@intel.com>,
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
David Nellans <dnellans@nvidia.com>,
Evgeny Baskakov <ebaskakov@nvidia.com>,
Mark Hairgrove <mhairgrove@nvidia.com>,
Sherry Cheung <SCheung@nvidia.com>,
Subhash Gutti <sgutti@nvidia.com>
Subject: Re: [HMM 10/16] mm/hmm/mirror: helper to snapshot CPU page table v2
Date: Mon, 10 Apr 2017 21:33:51 -0400 (EDT) [thread overview]
Message-ID: <536509398.25054000.1491874431882.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <20170410151031.d9488d850d740e894a55321c@linux-foundation.org>
> On Mon, 10 Apr 2017 10:43:26 +0200 Michal Hocko <mhocko@kernel.org> wrote:
>
> > There are more for alpha allmodconfig
>
> HMM is rather a compile catastrophe, as was the earlier version I
> merged.
>
> Jerome, I'm thinking you need to install some cross-compilers!
Sorry about that.
I tested some but obviously not all, in the v20 i did on top of Michal
patchset i simply made everything to be x86-64 only. So if you revert
v19 and wait for Michal to finish his v3 then i will post v20 that is
x86-64 only which i do build and use. At least from my discussion with
Michal i thought you were dropping v19 until Michal could finish his
memory hotplug rework.
Cheers,
Jérôme
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Glisse <jglisse@redhat.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
John Hubbard <jhubbard@nvidia.com>,
Dan Williams <dan.j.williams@intel.com>,
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
David Nellans <dnellans@nvidia.com>,
Evgeny Baskakov <ebaskakov@nvidia.com>,
Mark Hairgrove <mhairgrove@nvidia.com>,
Sherry Cheung <SCheung@nvidia.com>,
Subhash Gutti <sgutti@nvidia.com>
Subject: Re: [HMM 10/16] mm/hmm/mirror: helper to snapshot CPU page table v2
Date: Mon, 10 Apr 2017 21:33:51 -0400 (EDT) [thread overview]
Message-ID: <536509398.25054000.1491874431882.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <20170410151031.d9488d850d740e894a55321c@linux-foundation.org>
> On Mon, 10 Apr 2017 10:43:26 +0200 Michal Hocko <mhocko@kernel.org> wrote:
>
> > There are more for alpha allmodconfig
>
> HMM is rather a compile catastrophe, as was the earlier version I
> merged.
>
> Jerome, I'm thinking you need to install some cross-compilers!
Sorry about that.
I tested some but obviously not all, in the v20 i did on top of Michal
patchset i simply made everything to be x86-64 only. So if you revert
v19 and wait for Michal to finish his v3 then i will post v20 that is
x86-64 only which i do build and use. At least from my discussion with
Michal i thought you were dropping v19 until Michal could finish his
memory hotplug rework.
Cheers,
Jérôme
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-04-11 1:33 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-05 20:40 [HMM 00/16] HMM (Heterogeneous Memory Management) v19 Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 01/16] mm/memory/hotplug: add memory type parameter to arch_add/remove_memory Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-06 9:45 ` Anshuman Khandual
2017-04-06 9:45 ` Anshuman Khandual
2017-04-06 13:58 ` Jerome Glisse
2017-04-06 13:58 ` Jerome Glisse
2017-04-07 12:13 ` Michal Hocko
2017-04-07 12:13 ` Michal Hocko
2017-04-07 14:32 ` Jerome Glisse
2017-04-07 14:32 ` Jerome Glisse
2017-04-07 14:45 ` Michal Hocko
2017-04-07 14:45 ` Michal Hocko
2017-04-07 14:57 ` Jerome Glisse
2017-04-07 14:57 ` Jerome Glisse
2017-04-07 15:11 ` Michal Hocko
2017-04-07 15:11 ` Michal Hocko
2017-04-07 16:10 ` Jerome Glisse
2017-04-07 16:10 ` Jerome Glisse
2017-04-07 16:37 ` Michal Hocko
2017-04-07 16:37 ` Michal Hocko
2017-04-07 17:10 ` Jerome Glisse
2017-04-07 17:10 ` Jerome Glisse
2017-04-07 17:59 ` Michal Hocko
2017-04-07 17:59 ` Michal Hocko
2017-04-07 18:27 ` Jerome Glisse
2017-04-07 18:27 ` Jerome Glisse
2017-04-05 20:40 ` [HMM 02/16] mm/put_page: move ZONE_DEVICE page reference decrement v2 Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 03/16] mm/unaddressable-memory: new type of ZONE_DEVICE for unaddressable memory Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 04/16] mm/ZONE_DEVICE/x86: add support for un-addressable device memory Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 05/16] mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 06/16] mm/migrate: new memory migration helper for use with device memory v4 Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 07/16] mm/migrate: migrate_vma() unmap page from vma while collecting pages Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 08/16] mm/hmm: heterogeneous memory management (HMM for short) Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 09/16] mm/hmm/mirror: mirror process address space on device with HMM helpers Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 10/16] mm/hmm/mirror: helper to snapshot CPU page table v2 Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-10 8:35 ` Michal Hocko
2017-04-10 8:35 ` Michal Hocko
2017-04-10 8:43 ` Michal Hocko
2017-04-10 8:43 ` Michal Hocko
2017-04-10 22:10 ` Andrew Morton
2017-04-10 22:10 ` Andrew Morton
2017-04-11 1:33 ` Jerome Glisse [this message]
2017-04-11 1:33 ` Jerome Glisse
2017-04-11 20:33 ` Andrew Morton
2017-04-11 20:33 ` Andrew Morton
2017-04-05 20:40 ` [HMM 11/16] mm/hmm/mirror: device page fault handler Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 12/16] mm/migrate: support un-addressable ZONE_DEVICE page in migration Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 13/16] mm/migrate: allow migrate_vma() to alloc new page on empty entry Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 14/16] mm/hmm/devmem: device memory hotplug using ZONE_DEVICE Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-06 21:22 ` Jerome Glisse
2017-04-06 21:22 ` Jerome Glisse
2017-04-07 1:37 ` Balbir Singh
2017-04-07 1:37 ` Balbir Singh
2017-04-07 2:02 ` Jerome Glisse
2017-04-07 2:02 ` Jerome Glisse
2017-04-07 16:26 ` Jerome Glisse
2017-04-07 16:26 ` Jerome Glisse
2017-04-10 4:31 ` Balbir Singh
2017-04-10 4:31 ` Balbir Singh
2017-04-05 20:40 ` [HMM 15/16] mm/hmm/devmem: dummy HMM device for ZONE_DEVICE memory v2 Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-05 20:40 ` [HMM 16/16] hmm: heterogeneous memory management documentation Jérôme Glisse
2017-04-05 20:40 ` Jérôme Glisse
2017-04-06 3:22 ` [HMM 00/16] HMM (Heterogeneous Memory Management) v19 Figo.zhang
2017-04-06 4:59 ` Jerome Glisse
2017-04-06 4:59 ` Jerome Glisse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536509398.25054000.1491874431882.JavaMail.zimbra@redhat.com \
--to=jglisse@redhat.com \
--cc=SCheung@nvidia.com \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=dnellans@nvidia.com \
--cc=ebaskakov@nvidia.com \
--cc=jhubbard@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhairgrove@nvidia.com \
--cc=mhocko@kernel.org \
--cc=n-horiguchi@ah.jp.nec.com \
--cc=sgutti@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.