* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
based attempts by Stephan and me that broke for 3.16, I've prepared a
device tree for the HP Chromebook 11 aka Google Spring.
v6 renames a node and reverts dp_hpd.
Not yet enabled are trackpad, Wifi and sound.
My rebasing branch for testing is here:
https://github.com/afaerber/linux/commits/spring-next
Regards,
Andreas
v1 -> v2:
* Dropped 3 documentation patches from series:
2 picked up,
https://patchwork.kernel.org/patch/4397271/
https://patchwork.kernel.org/patch/4397291/
1 already sent separately as v2, pending.
https://patchwork.kernel.org/patch/4424881/
* Minimized and beautified Spring device tree and to some degree Snow as well.
See individual patches.
v2 -> v3:
* Rebased: Two -cros-common cleanup patches were already applied
* Lots of small cleanups for both Snow and Spring
* Enabled I2S in Spring for symmetry
* Added lid-switch and gpio-keys pinctrls to Spring
v3 -> v4:
* Fixed pin-function 1 -> 0 for dp-hpd pinctrl, style cleanup
v4 -> v5:
* Dropped regulator and fixed USB3503 for Spring
* More cleanups, including SMDK5250 and Arndale
v5 -> v6:
* Renamed mfc node label for alignment with iommu patches around
* Reverted dp-hpd to v4
Andreas F?rber (10):
ARM: dts: Fix MMC pinctrl for exynos5250-snow
ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
ARM: dts: Prepare node labels for exynos5250
ARM: dts: Clean up exynos5250-snow
ARM: dts: Fill in bootargs for exynos5250-snow
ARM: dts: Clean up exynos5250-smdk5250
ARM: dts: Clean up exynos5250-arndale
ARM: dts: Fix apparent GPIO typo in exynos5250-arndale
ARM: dts: Simplify USB3503 on exynos5250-arndale
ARM: dts: Add exynos5250-spring device tree
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5250-arndale.dts | 927 +++++++++++++-------------
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 164 -----
arch/arm/boot/dts/exynos5250-smdk5250.dts | 632 +++++++++---------
arch/arm/boot/dts/exynos5250-snow.dts | 434 +++++++-----
arch/arm/boot/dts/exynos5250-spring.dts | 536 +++++++++++++++
arch/arm/boot/dts/exynos5250.dtsi | 24 +-
7 files changed, 1608 insertions(+), 1110 deletions(-)
delete mode 100644 arch/arm/boot/dts/exynos5250-cros-common.dtsi
create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts
--
1.9.3
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 01/10] ARM: dts: Fix MMC pinctrl for exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Jaehoon Chung, Ben Dooks,
Kukjin Kim, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Russell King, open list
The pinctrl properties should be on the device directly and not on the
slot sub-node.
Reported-by: Doug Anderson <dianders@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v3 -> v4 -> v5 -> v6: Unchanged
v3: New (Doug Anderson)
Redundant with Jaehoon Chung's general slot@0 deprecation,
in case that hits the tree earlier.
arch/arm/boot/dts/exynos5250-snow.dts | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index f2b8c4116541..eb437f6afec1 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -240,10 +240,8 @@
*/
mmc@12230000 {
status = "okay";
- slot@0 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
};
i2c@12CD0000 {
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 01/10] ARM: dts: Fix MMC pinctrl for exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
The pinctrl properties should be on the device directly and not on the
slot sub-node.
Reported-by: Doug Anderson <dianders@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v3 -> v4 -> v5 -> v6: Unchanged
v3: New (Doug Anderson)
Redundant with Jaehoon Chung's general slot at 0 deprecation,
in case that hits the tree earlier.
arch/arm/boot/dts/exynos5250-snow.dts | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index f2b8c4116541..eb437f6afec1 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -240,10 +240,8 @@
*/
mmc at 12230000 {
status = "okay";
- slot at 0 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
};
i2c at 12CD0000 {
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 01/10] ARM: dts: Fix MMC pinctrl for exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Jaehoon Chung, Ben Dooks,
Kukjin Kim, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Russell King, open list
The pinctrl properties should be on the device directly and not on the
slot sub-node.
Reported-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: Jaehoon Chung <jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
---
v3 -> v4 -> v5 -> v6: Unchanged
v3: New (Doug Anderson)
Redundant with Jaehoon Chung's general slot@0 deprecation,
in case that hits the tree earlier.
arch/arm/boot/dts/exynos5250-snow.dts | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index f2b8c4116541..eb437f6afec1 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -240,10 +240,8 @@
*/
mmc@12230000 {
status = "okay";
- slot@0 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
};
i2c@12CD0000 {
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 98+ messages in thread
* [PATCH v6 02/10] ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
exynos5250-cros-common.dtsi was meant for sharing common pieces across
ChromeOS devices. This turned out premature, as several devices ended up
in the common file that are not common after all. Since the remaining
common ChromeOS pieces are fairly minor, exynos5250-cros-common.dtsi
was requested to be merged into the Snow device tree, sharing only the
keyboard controller for now. This may be re-evaluated as both mature.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v4 -> v5:
* Extended commit message (Tomasz Figa)
v3 -> v4: Unchanged
v2 -> v3:
* Renamed subject to match Kukjin's style
* Rebased onto MMC pinctrl bug fix (Doug Anderson)
v2: New (Doug Anderson)
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 164 --------------------------
arch/arm/boot/dts/exynos5250-snow.dts | 164 +++++++++++++++++++++++---
2 files changed, 145 insertions(+), 183 deletions(-)
delete mode 100644 arch/arm/boot/dts/exynos5250-cros-common.dtsi
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
deleted file mode 100644
index e603e9c70142..000000000000
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Common device tree include for all Exynos 5250 boards based off of Daisy.
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
- aliases {
- };
-
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
- chosen {
- };
-
- pinctrl@11400000 {
- /*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
- i2c2_bus: i2c2-bus {
- samsung,pin-pud = <0>;
- };
- };
-
- i2c@12C60000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
- };
-
- i2c@12C70000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
- };
-
- i2c@12C80000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CA0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CB0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CD0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CE0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- mmc@12200000 {
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
-
- mmc@12220000 {
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
- };
- };
-
- mmc@12230000 {
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- /* See board-specific dts files for pin setup */
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
- };
-
- spi_1: spi@12d30000 {
- status = "okay";
- samsung,spi-src-clk = <0>;
- num-cs = <1>;
- };
-
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
- gpio-key,wakeup;
- };
- };
-};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index eb437f6afec1..1c36cd72905f 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -10,7 +10,6 @@
/dts-v1/;
#include "exynos5250.dtsi"
-#include "exynos5250-cros-common.dtsi"
/ {
model = "Google Snow";
@@ -20,6 +19,13 @@
i2c104 = &i2c_104;
};
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ };
+
rtc@101E0000 {
status = "okay";
};
@@ -93,6 +99,13 @@
gpio-keys {
compatible = "gpio-keys";
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 1>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
lid-switch {
label = "Lid";
gpios = <&gpx3 5 1>;
@@ -226,24 +239,6 @@
};
};
- mmc@12200000 {
- status = "okay";
- };
-
- mmc@12220000 {
- status = "okay";
- };
-
- /*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
- mmc@12230000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
- };
-
i2c@12CD0000 {
max98095: codec@11 {
compatible = "maxim,max98095";
@@ -292,6 +287,11 @@
};
hdmi {
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
@@ -343,6 +343,10 @@
};
&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
@@ -489,6 +493,10 @@
};
&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
@@ -498,6 +506,118 @@
};
};
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 0>;
+ };
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
&pinctrl_0 {
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
@@ -507,4 +627,10 @@
};
};
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
#include "cros-ec-keyboard.dtsi"
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 02/10] ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
exynos5250-cros-common.dtsi was meant for sharing common pieces across
ChromeOS devices. This turned out premature, as several devices ended up
in the common file that are not common after all. Since the remaining
common ChromeOS pieces are fairly minor, exynos5250-cros-common.dtsi
was requested to be merged into the Snow device tree, sharing only the
keyboard controller for now. This may be re-evaluated as both mature.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v4 -> v5:
* Extended commit message (Tomasz Figa)
v3 -> v4: Unchanged
v2 -> v3:
* Renamed subject to match Kukjin's style
* Rebased onto MMC pinctrl bug fix (Doug Anderson)
v2: New (Doug Anderson)
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 164 --------------------------
arch/arm/boot/dts/exynos5250-snow.dts | 164 +++++++++++++++++++++++---
2 files changed, 145 insertions(+), 183 deletions(-)
delete mode 100644 arch/arm/boot/dts/exynos5250-cros-common.dtsi
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
deleted file mode 100644
index e603e9c70142..000000000000
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Common device tree include for all Exynos 5250 boards based off of Daisy.
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
- aliases {
- };
-
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
- chosen {
- };
-
- pinctrl at 11400000 {
- /*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
- i2c2_bus: i2c2-bus {
- samsung,pin-pud = <0>;
- };
- };
-
- i2c at 12C60000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
- };
-
- i2c at 12C70000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
- };
-
- i2c at 12C80000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc at 50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c at 12C90000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c at 12CA0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c at 12CB0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c at 12CD0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c at 12CE0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy at 38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- mmc at 12200000 {
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
- slot at 0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
-
- mmc at 12220000 {
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot at 0 {
- reg = <0>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
- };
- };
-
- mmc at 12230000 {
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- /* See board-specific dts files for pin setup */
-
- slot at 0 {
- reg = <0>;
- bus-width = <4>;
- };
- };
-
- spi_1: spi at 12d30000 {
- status = "okay";
- samsung,spi-src-clk = <0>;
- num-cs = <1>;
- };
-
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
- gpio-key,wakeup;
- };
- };
-};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index eb437f6afec1..1c36cd72905f 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -10,7 +10,6 @@
/dts-v1/;
#include "exynos5250.dtsi"
-#include "exynos5250-cros-common.dtsi"
/ {
model = "Google Snow";
@@ -20,6 +19,13 @@
i2c104 = &i2c_104;
};
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ };
+
rtc at 101E0000 {
status = "okay";
};
@@ -93,6 +99,13 @@
gpio-keys {
compatible = "gpio-keys";
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 1>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
lid-switch {
label = "Lid";
gpios = <&gpx3 5 1>;
@@ -226,24 +239,6 @@
};
};
- mmc at 12200000 {
- status = "okay";
- };
-
- mmc at 12220000 {
- status = "okay";
- };
-
- /*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
- mmc at 12230000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
- };
-
i2c at 12CD0000 {
max98095: codec at 11 {
compatible = "maxim,max98095";
@@ -292,6 +287,11 @@
};
hdmi {
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
@@ -343,6 +343,10 @@
};
&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
max77686 at 09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
@@ -489,6 +493,10 @@
};
&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
@@ -498,6 +506,118 @@
};
};
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc at 50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy at 38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 0>;
+ };
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
&pinctrl_0 {
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
@@ -507,4 +627,10 @@
};
};
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
#include "cros-ec-keyboard.dtsi"
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 02/10] ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
exynos5250-cros-common.dtsi was meant for sharing common pieces across
ChromeOS devices. This turned out premature, as several devices ended up
in the common file that are not common after all. Since the remaining
common ChromeOS pieces are fairly minor, exynos5250-cros-common.dtsi
was requested to be merged into the Snow device tree, sharing only the
keyboard controller for now. This may be re-evaluated as both mature.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v4 -> v5:
* Extended commit message (Tomasz Figa)
v3 -> v4: Unchanged
v2 -> v3:
* Renamed subject to match Kukjin's style
* Rebased onto MMC pinctrl bug fix (Doug Anderson)
v2: New (Doug Anderson)
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 164 --------------------------
arch/arm/boot/dts/exynos5250-snow.dts | 164 +++++++++++++++++++++++---
2 files changed, 145 insertions(+), 183 deletions(-)
delete mode 100644 arch/arm/boot/dts/exynos5250-cros-common.dtsi
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
deleted file mode 100644
index e603e9c70142..000000000000
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Common device tree include for all Exynos 5250 boards based off of Daisy.
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
- aliases {
- };
-
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
- chosen {
- };
-
- pinctrl@11400000 {
- /*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
- i2c2_bus: i2c2-bus {
- samsung,pin-pud = <0>;
- };
- };
-
- i2c@12C60000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
- };
-
- i2c@12C70000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
- };
-
- i2c@12C80000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CA0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CB0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CD0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- };
-
- i2c@12CE0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- mmc@12200000 {
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
-
- mmc@12220000 {
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
- };
- };
-
- mmc@12230000 {
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- /* See board-specific dts files for pin setup */
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
- };
-
- spi_1: spi@12d30000 {
- status = "okay";
- samsung,spi-src-clk = <0>;
- num-cs = <1>;
- };
-
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
- gpio-key,wakeup;
- };
- };
-};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index eb437f6afec1..1c36cd72905f 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -10,7 +10,6 @@
/dts-v1/;
#include "exynos5250.dtsi"
-#include "exynos5250-cros-common.dtsi"
/ {
model = "Google Snow";
@@ -20,6 +19,13 @@
i2c104 = &i2c_104;
};
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ };
+
rtc@101E0000 {
status = "okay";
};
@@ -93,6 +99,13 @@
gpio-keys {
compatible = "gpio-keys";
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 1>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
lid-switch {
label = "Lid";
gpios = <&gpx3 5 1>;
@@ -226,24 +239,6 @@
};
};
- mmc@12200000 {
- status = "okay";
- };
-
- mmc@12220000 {
- status = "okay";
- };
-
- /*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
- mmc@12230000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
- };
-
i2c@12CD0000 {
max98095: codec@11 {
compatible = "maxim,max98095";
@@ -292,6 +287,11 @@
};
hdmi {
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
@@ -343,6 +343,10 @@
};
&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
@@ -489,6 +493,10 @@
};
&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
@@ -498,6 +506,118 @@
};
};
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 0>;
+ };
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
&pinctrl_0 {
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
@@ -507,4 +627,10 @@
};
};
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
#include "cros-ec-keyboard.dtsi"
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread
* [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
Allows them to be extended by reference.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v6: Split off from Snow/SMDK cleanups (Doug Anderson)
arch/arm/boot/dts/exynos5250.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 834fb5a5306f..cf94aeaeaa84 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -215,7 +215,7 @@
clock-names = "fimg2d";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -224,7 +224,7 @@
clock-names = "mfc";
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -238,27 +238,27 @@
clock-names = "tmu_apbif";
};
- serial@12C00000 {
+ uart0: serial@12C00000 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C10000 {
+ uart1: serial@12C10000 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C20000 {
+ uart2: serial@12C20000 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C30000 {
+ uart3: serial@12C30000 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
- sata@122F0000 {
+ sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
@@ -570,7 +570,7 @@
#phy-cells = <1>;
};
- usb@12110000 {
+ ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
@@ -585,7 +585,7 @@
};
};
- usb@12120000 {
+ ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
@@ -722,7 +722,7 @@
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -748,14 +748,14 @@
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
Allows them to be extended by reference.
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v6: Split off from Snow/SMDK cleanups (Doug Anderson)
arch/arm/boot/dts/exynos5250.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 834fb5a5306f..cf94aeaeaa84 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -215,7 +215,7 @@
clock-names = "fimg2d";
};
- codec at 11000000 {
+ mfc: codec at 11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -224,7 +224,7 @@
clock-names = "mfc";
};
- rtc at 101E0000 {
+ rtc: rtc at 101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -238,27 +238,27 @@
clock-names = "tmu_apbif";
};
- serial at 12C00000 {
+ uart0: serial at 12C00000 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
- serial at 12C10000 {
+ uart1: serial at 12C10000 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
- serial at 12C20000 {
+ uart2: serial at 12C20000 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- serial at 12C30000 {
+ uart3: serial at 12C30000 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
- sata at 122F0000 {
+ sata: sata at 122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
@@ -570,7 +570,7 @@
#phy-cells = <1>;
};
- usb at 12110000 {
+ ehci: usb at 12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
@@ -585,7 +585,7 @@
};
};
- usb at 12120000 {
+ ohci: usb at 12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
@@ -722,7 +722,7 @@
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -748,14 +748,14 @@
#phy-cells = <0>;
};
- dp-controller at 145B0000 {
+ dp: dp-controller at 145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd at 14400000 {
+ fimd: fimd at 14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Andreas Färber, Russell King, Javier Martinez Canillas,
linux-arm-kernel
Allows them to be extended by reference.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v6: Split off from Snow/SMDK cleanups (Doug Anderson)
arch/arm/boot/dts/exynos5250.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 834fb5a5306f..cf94aeaeaa84 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -215,7 +215,7 @@
clock-names = "fimg2d";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -224,7 +224,7 @@
clock-names = "mfc";
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -238,27 +238,27 @@
clock-names = "tmu_apbif";
};
- serial@12C00000 {
+ uart0: serial@12C00000 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C10000 {
+ uart1: serial@12C10000 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C20000 {
+ uart2: serial@12C20000 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C30000 {
+ uart3: serial@12C30000 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
- sata@122F0000 {
+ sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
@@ -570,7 +570,7 @@
#phy-cells = <1>;
};
- usb@12110000 {
+ ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
@@ -585,7 +585,7 @@
};
};
- usb@12120000 {
+ ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
@@ -722,7 +722,7 @@
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -748,14 +748,14 @@
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
--
1.9.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 98+ messages in thread* Re: [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 4:48 ` Doug Anderson
-1 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-02 4:48 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, open list
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@suse.de> wrote:
> Allows them to be extended by reference.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250.dtsi | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-02 4:48 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-02 4:48 UTC (permalink / raw)
To: linux-arm-kernel
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas F?rber <afaerber@suse.de> wrote:
> Allows them to be extended by reference.
>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250.dtsi | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-02 4:48 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-02 4:48 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, open list
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@suse.de> wrote:
> Allows them to be extended by reference.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250.dtsi | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
2014-08-02 0:52 ` Andreas Färber
@ 2014-08-02 12:19 ` Tomasz Figa
-1 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 12:19 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Russell King, Javier Martinez Canillas, linux-arm-kernel
Andreas,
Ehh, one more thing. It looks like my memory is playing tricks on me.
Please see inline.
On 02.08.2014 02:52, Andreas Färber wrote:
> Allows them to be extended by reference.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
[snip]
> - serial@12C00000 {
> + uart0: serial@12C00000 {
> clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
> clock-names = "uart", "clk_uart_baud0";
> };
>
> - serial@12C10000 {
> + uart1: serial@12C10000 {
> clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
> clock-names = "uart", "clk_uart_baud0";
> };
>
> - serial@12C20000 {
> + uart2: serial@12C20000 {
> clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
> clock-names = "uart", "clk_uart_baud0";
> };
>
> - serial@12C30000 {
> + uart3: serial@12C30000 {
> clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
> clock-names = "uart", "clk_uart_baud0";
> };
I forgot about a series [1] that went through tty tree, which is going
to conflict with this patch. It already adds labels to uart nodes in
serial_X format. I don't really remember why I went with this format for
Exynos SoCs and with uartX for older ones...
[1]
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts?id=1e64f48ea7c59fb94acd7551dd9fa68b8a752efc
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-02 12:19 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 12:19 UTC (permalink / raw)
To: linux-arm-kernel
Andreas,
Ehh, one more thing. It looks like my memory is playing tricks on me.
Please see inline.
On 02.08.2014 02:52, Andreas F?rber wrote:
> Allows them to be extended by reference.
>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
[snip]
> - serial at 12C00000 {
> + uart0: serial at 12C00000 {
> clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
> clock-names = "uart", "clk_uart_baud0";
> };
>
> - serial at 12C10000 {
> + uart1: serial at 12C10000 {
> clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
> clock-names = "uart", "clk_uart_baud0";
> };
>
> - serial at 12C20000 {
> + uart2: serial at 12C20000 {
> clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
> clock-names = "uart", "clk_uart_baud0";
> };
>
> - serial at 12C30000 {
> + uart3: serial at 12C30000 {
> clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
> clock-names = "uart", "clk_uart_baud0";
> };
I forgot about a series [1] that went through tty tree, which is going
to conflict with this patch. It already adds labels to uart nodes in
serial_X format. I don't really remember why I went with this format for
Exynos SoCs and with uartX for older ones...
[1]
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts?id=1e64f48ea7c59fb94acd7551dd9fa68b8a752efc
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-02 13:00 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 13:00 UTC (permalink / raw)
To: Tomasz Figa, linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Russell King, Javier Martinez Canillas, linux-arm-kernel
Am 02.08.2014 14:19, schrieb Tomasz Figa:
> Andreas,
>
> Ehh, one more thing. It looks like my memory is playing tricks on me.
> Please see inline.
>
> On 02.08.2014 02:52, Andreas Färber wrote:
>> Allows them to be extended by reference.
>>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>
> [snip]
>
>> - serial@12C00000 {
>> + uart0: serial@12C00000 {
>> clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial@12C10000 {
>> + uart1: serial@12C10000 {
>> clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial@12C20000 {
>> + uart2: serial@12C20000 {
>> clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial@12C30000 {
>> + uart3: serial@12C30000 {
>> clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>
> I forgot about a series [1] that went through tty tree, which is going
> to conflict with this patch. It already adds labels to uart nodes in
> serial_X format. I don't really remember why I went with this format for
> Exynos SoCs and with uartX for older ones...
>
> [1]
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts?id=1e64f48ea7c59fb94acd7551dd9fa68b8a752efc
I doubt that I'll manage to resend another time today, so please just
drop those hunks from my patch before applying - I ended up not using
them here.
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-02 13:00 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 13:00 UTC (permalink / raw)
To: linux-arm-kernel
Am 02.08.2014 14:19, schrieb Tomasz Figa:
> Andreas,
>
> Ehh, one more thing. It looks like my memory is playing tricks on me.
> Please see inline.
>
> On 02.08.2014 02:52, Andreas F?rber wrote:
>> Allows them to be extended by reference.
>>
>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>> ---
>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>
> [snip]
>
>> - serial at 12C00000 {
>> + uart0: serial at 12C00000 {
>> clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial at 12C10000 {
>> + uart1: serial at 12C10000 {
>> clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial at 12C20000 {
>> + uart2: serial at 12C20000 {
>> clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial at 12C30000 {
>> + uart3: serial at 12C30000 {
>> clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>
> I forgot about a series [1] that went through tty tree, which is going
> to conflict with this patch. It already adds labels to uart nodes in
> serial_X format. I don't really remember why I went with this format for
> Exynos SoCs and with uartX for older ones...
>
> [1]
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts?id=1e64f48ea7c59fb94acd7551dd9fa68b8a752efc
I doubt that I'll manage to resend another time today, so please just
drop those hunks from my patch before applying - I ended up not using
them here.
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-02 13:00 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 13:00 UTC (permalink / raw)
To: Tomasz Figa, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA
Cc: Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA, Kukjin Kim,
Vincent Palatin, Pawel Moll, Ian Campbell, open list,
Tomasz Figa, Kumar Gala, Stephan van Schaik, Doug Anderson,
Rob Herring, Ben Dooks, Russell King, Javier Martinez Canillas,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Am 02.08.2014 14:19, schrieb Tomasz Figa:
> Andreas,
>
> Ehh, one more thing. It looks like my memory is playing tricks on me.
> Please see inline.
>
> On 02.08.2014 02:52, Andreas Färber wrote:
>> Allows them to be extended by reference.
>>
>> Signed-off-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
>> ---
>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>
> [snip]
>
>> - serial@12C00000 {
>> + uart0: serial@12C00000 {
>> clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial@12C10000 {
>> + uart1: serial@12C10000 {
>> clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial@12C20000 {
>> + uart2: serial@12C20000 {
>> clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - serial@12C30000 {
>> + uart3: serial@12C30000 {
>> clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
>> clock-names = "uart", "clk_uart_baud0";
>> };
>
> I forgot about a series [1] that went through tty tree, which is going
> to conflict with this patch. It already adds labels to uart nodes in
> serial_X format. I don't really remember why I went with this format for
> Exynos SoCs and with uartX for older ones...
>
> [1]
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts?id=1e64f48ea7c59fb94acd7551dd9fa68b8a752efc
I doubt that I'll manage to resend another time today, so please just
drop those hunks from my patch before applying - I ended up not using
them here.
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
2014-08-02 13:00 ` Andreas Färber
@ 2014-08-20 13:06 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-20 13:06 UTC (permalink / raw)
To: Tomasz Figa, linux-samsung-soc, Kukjin Kim
Cc: Mark Rutland, devicetree, Vincent Palatin, Pawel Moll,
Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Russell King, Javier Martinez Canillas, linux-arm-kernel
Am 02.08.2014 15:00, schrieb Andreas Färber:
> Am 02.08.2014 14:19, schrieb Tomasz Figa:
>> Andreas,
>>
>> Ehh, one more thing. It looks like my memory is playing tricks on me.
>> Please see inline.
>>
>> On 02.08.2014 02:52, Andreas Färber wrote:
>>> Allows them to be extended by reference.
>>>
>>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>>> ---
>>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>>
>> [snip]
>>
>>> - serial@12C00000 {
>>> + uart0: serial@12C00000 {
>>> clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> };
>>>
>>> - serial@12C10000 {
>>> + uart1: serial@12C10000 {
>>> clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> };
>>>
>>> - serial@12C20000 {
>>> + uart2: serial@12C20000 {
>>> clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> };
>>>
>>> - serial@12C30000 {
>>> + uart3: serial@12C30000 {
>>> clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> };
>>
>> I forgot about a series [1] that went through tty tree, which is going
>> to conflict with this patch. It already adds labels to uart nodes in
>> serial_X format. I don't really remember why I went with this format for
>> Exynos SoCs and with uartX for older ones...
>>
>> [1]
>> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts?id=1e64f48ea7c59fb94acd7551dd9fa68b8a752efc
>
> I doubt that I'll manage to resend another time today, [...]
Sorry, forgot about this. Done now. v7 as individual reply.
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 03/10] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-20 13:06 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-20 13:06 UTC (permalink / raw)
To: linux-arm-kernel
Am 02.08.2014 15:00, schrieb Andreas F?rber:
> Am 02.08.2014 14:19, schrieb Tomasz Figa:
>> Andreas,
>>
>> Ehh, one more thing. It looks like my memory is playing tricks on me.
>> Please see inline.
>>
>> On 02.08.2014 02:52, Andreas F?rber wrote:
>>> Allows them to be extended by reference.
>>>
>>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>>> ---
>>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>>
>> [snip]
>>
>>> - serial at 12C00000 {
>>> + uart0: serial at 12C00000 {
>>> clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> };
>>>
>>> - serial at 12C10000 {
>>> + uart1: serial at 12C10000 {
>>> clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> };
>>>
>>> - serial at 12C20000 {
>>> + uart2: serial at 12C20000 {
>>> clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> };
>>>
>>> - serial at 12C30000 {
>>> + uart3: serial at 12C30000 {
>>> clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> };
>>
>> I forgot about a series [1] that went through tty tree, which is going
>> to conflict with this patch. It already adds labels to uart nodes in
>> serial_X format. I don't really remember why I went with this format for
>> Exynos SoCs and with uartX for older ones...
>>
>> [1]
>> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts?id=1e64f48ea7c59fb94acd7551dd9fa68b8a752efc
>
> I doubt that I'll manage to resend another time today, [...]
Sorry, forgot about this. Done now. v7 as individual reply.
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v7] ARM: dts: Prepare node labels for exynos5250
2014-08-02 12:19 ` Tomasz Figa
(?)
@ 2014-08-20 13:02 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-20 13:02 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Vincent Palatin, Doug Anderson,
Javier Martinez Canillas, Tomasz Figa, Andreas Färber,
Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Russell King, open list
Allows them to be extended by reference.
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v6 -> v7:
* Dropped uart* labels (Tomasz Figa)
v6: Split off from Snow/SMDK cleanups (Doug Anderson)
arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 492e1eff37bd..42eafd19cfb2 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -218,7 +218,7 @@
clock-names = "fimg2d";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -227,7 +227,7 @@
clock-names = "mfc";
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -261,7 +261,7 @@
clock-names = "uart", "clk_uart_baud0";
};
- sata@122F0000 {
+ sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
@@ -573,7 +573,7 @@
#phy-cells = <1>;
};
- usb@12110000 {
+ ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
@@ -588,7 +588,7 @@
};
};
- usb@12120000 {
+ ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
@@ -725,7 +725,7 @@
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -751,14 +751,14 @@
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
--
2.0.4
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v7] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-20 13:02 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-20 13:02 UTC (permalink / raw)
To: linux-arm-kernel
Allows them to be extended by reference.
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v6 -> v7:
* Dropped uart* labels (Tomasz Figa)
v6: Split off from Snow/SMDK cleanups (Doug Anderson)
arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 492e1eff37bd..42eafd19cfb2 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -218,7 +218,7 @@
clock-names = "fimg2d";
};
- codec at 11000000 {
+ mfc: codec at 11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -227,7 +227,7 @@
clock-names = "mfc";
};
- rtc at 101E0000 {
+ rtc: rtc at 101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -261,7 +261,7 @@
clock-names = "uart", "clk_uart_baud0";
};
- sata at 122F0000 {
+ sata: sata at 122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
@@ -573,7 +573,7 @@
#phy-cells = <1>;
};
- usb at 12110000 {
+ ehci: usb at 12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
@@ -588,7 +588,7 @@
};
};
- usb at 12120000 {
+ ohci: usb at 12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
@@ -725,7 +725,7 @@
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -751,14 +751,14 @@
#phy-cells = <0>;
};
- dp-controller at 145B0000 {
+ dp: dp-controller at 145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd at 14400000 {
+ fimd: fimd at 14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
--
2.0.4
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v7] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-20 13:02 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-20 13:02 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Vincent Palatin, Doug Anderson,
Javier Martinez Canillas, Tomasz Figa, Andreas Färber,
Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Russell King, open list
Allows them to be extended by reference.
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v6 -> v7:
* Dropped uart* labels (Tomasz Figa)
v6: Split off from Snow/SMDK cleanups (Doug Anderson)
arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 492e1eff37bd..42eafd19cfb2 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -218,7 +218,7 @@
clock-names = "fimg2d";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -227,7 +227,7 @@
clock-names = "mfc";
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -261,7 +261,7 @@
clock-names = "uart", "clk_uart_baud0";
};
- sata@122F0000 {
+ sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
@@ -573,7 +573,7 @@
#phy-cells = <1>;
};
- usb@12110000 {
+ ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
@@ -588,7 +588,7 @@
};
};
- usb@12120000 {
+ ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
@@ -725,7 +725,7 @@
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -751,14 +751,14 @@
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
--
2.0.4
^ permalink raw reply related [flat|nested] 98+ messages in thread* RE: [PATCH v7] ARM: dts: Prepare node labels for exynos5250
2014-08-20 13:02 ` Andreas Färber
@ 2014-08-22 10:49 ` Kukjin Kim
-1 siblings, 0 replies; 98+ messages in thread
From: Kukjin Kim @ 2014-08-22 10:49 UTC (permalink / raw)
To: 'Andreas Färber', linux-samsung-soc
Cc: linux-arm-kernel, devicetree, 'Vincent Palatin',
'Doug Anderson', 'Javier Martinez Canillas',
'Tomasz Figa', 'Ben Dooks', 'Rob Herring',
'Pawel Moll', 'Mark Rutland',
'Ian Campbell', 'Kumar Gala',
'Russell King', 'open list'
Andreas Färber wrote:
>
> Allows them to be extended by reference.
>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v6 -> v7:
> * Dropped uart* labels (Tomasz Figa)
>
> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 492e1eff37bd..42eafd19cfb2 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -218,7 +218,7 @@
> clock-names = "fimg2d";
> };
>
> - codec@11000000 {
> + mfc: codec@11000000 {
> compatible = "samsung,mfc-v6";
> reg = <0x11000000 0x10000>;
> interrupts = <0 96 0>;
> @@ -227,7 +227,7 @@
> clock-names = "mfc";
> };
>
> - rtc@101E0000 {
> + rtc: rtc@101E0000 {
> clocks = <&clock CLK_RTC>;
> clock-names = "rtc";
> status = "disabled";
> @@ -261,7 +261,7 @@
> clock-names = "uart", "clk_uart_baud0";
> };
>
> - sata@122F0000 {
> + sata: sata@122F0000 {
> compatible = "snps,dwc-ahci";
> samsung,sata-freq = <66>;
> reg = <0x122F0000 0x1ff>;
> @@ -573,7 +573,7 @@
> #phy-cells = <1>;
> };
>
> - usb@12110000 {
> + ehci: usb@12110000 {
I'm not sure which one is recommended between above and "ehci: ehci@12110000 {"
> compatible = "samsung,exynos4210-ehci";
> reg = <0x12110000 0x100>;
> interrupts = <0 71 0>;
> @@ -588,7 +588,7 @@
> };
> };
>
> - usb@12120000 {
> + ohci: usb@12120000 {
Same as above...
> compatible = "samsung,exynos4210-ohci";
> reg = <0x12120000 0x100>;
> interrupts = <0 71 0>;
> @@ -725,7 +725,7 @@
> clock-names = "gscl";
> };
>
> - hdmi {
> + hdmi: hdmi {
Should be
+ hdmi: hdmi@14530000 { ?
> compatible = "samsung,exynos4212-hdmi";
> reg = <0x14530000 0x70000>;
> interrupts = <0 95 0>;
> @@ -751,14 +751,14 @@
> #phy-cells = <0>;
> };
>
> - dp-controller@145B0000 {
> + dp: dp-controller@145B0000 {
> clocks = <&clock CLK_DP>;
> clock-names = "dp";
> phys = <&dp_phy>;
> phy-names = "dp";
> };
>
> - fimd@14400000 {
> + fimd: fimd@14400000 {
> clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
> clock-names = "sclk_fimd", "fimd";
> };
> --
> 2.0.4
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v7] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-22 10:49 ` Kukjin Kim
0 siblings, 0 replies; 98+ messages in thread
From: Kukjin Kim @ 2014-08-22 10:49 UTC (permalink / raw)
To: linux-arm-kernel
Andreas F?rber wrote:
>
> Allows them to be extended by reference.
>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v6 -> v7:
> * Dropped uart* labels (Tomasz Figa)
>
> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 492e1eff37bd..42eafd19cfb2 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -218,7 +218,7 @@
> clock-names = "fimg2d";
> };
>
> - codec at 11000000 {
> + mfc: codec at 11000000 {
> compatible = "samsung,mfc-v6";
> reg = <0x11000000 0x10000>;
> interrupts = <0 96 0>;
> @@ -227,7 +227,7 @@
> clock-names = "mfc";
> };
>
> - rtc at 101E0000 {
> + rtc: rtc at 101E0000 {
> clocks = <&clock CLK_RTC>;
> clock-names = "rtc";
> status = "disabled";
> @@ -261,7 +261,7 @@
> clock-names = "uart", "clk_uart_baud0";
> };
>
> - sata at 122F0000 {
> + sata: sata at 122F0000 {
> compatible = "snps,dwc-ahci";
> samsung,sata-freq = <66>;
> reg = <0x122F0000 0x1ff>;
> @@ -573,7 +573,7 @@
> #phy-cells = <1>;
> };
>
> - usb at 12110000 {
> + ehci: usb at 12110000 {
I'm not sure which one is recommended between above and "ehci: ehci at 12110000 {"
> compatible = "samsung,exynos4210-ehci";
> reg = <0x12110000 0x100>;
> interrupts = <0 71 0>;
> @@ -588,7 +588,7 @@
> };
> };
>
> - usb at 12120000 {
> + ohci: usb at 12120000 {
Same as above...
> compatible = "samsung,exynos4210-ohci";
> reg = <0x12120000 0x100>;
> interrupts = <0 71 0>;
> @@ -725,7 +725,7 @@
> clock-names = "gscl";
> };
>
> - hdmi {
> + hdmi: hdmi {
Should be
+ hdmi: hdmi at 14530000 { ?
> compatible = "samsung,exynos4212-hdmi";
> reg = <0x14530000 0x70000>;
> interrupts = <0 95 0>;
> @@ -751,14 +751,14 @@
> #phy-cells = <0>;
> };
>
> - dp-controller at 145B0000 {
> + dp: dp-controller at 145B0000 {
> clocks = <&clock CLK_DP>;
> clock-names = "dp";
> phys = <&dp_phy>;
> phy-names = "dp";
> };
>
> - fimd at 14400000 {
> + fimd: fimd at 14400000 {
> clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
> clock-names = "sclk_fimd", "fimd";
> };
> --
> 2.0.4
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v7] ARM: dts: Prepare node labels for exynos5250
2014-08-22 10:49 ` Kukjin Kim
@ 2014-08-22 11:37 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-22 11:37 UTC (permalink / raw)
To: Kukjin Kim, linux-samsung-soc
Cc: linux-arm-kernel, devicetree, 'Vincent Palatin',
'Doug Anderson', 'Javier Martinez Canillas',
'Tomasz Figa', 'Ben Dooks', 'Rob Herring',
'Pawel Moll', 'Mark Rutland',
'Ian Campbell', 'Kumar Gala',
'Russell King',
LKML
Am 22.08.2014 12:49, schrieb Kukjin Kim:
> Andreas Färber wrote:
>>
>> Allows them to be extended by reference.
>>
>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> v6 -> v7:
>> * Dropped uart* labels (Tomasz Figa)
>>
>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>>
>> arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
>> 1 file changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
>> index 492e1eff37bd..42eafd19cfb2 100644
>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> @@ -218,7 +218,7 @@
>> clock-names = "fimg2d";
>> };
>>
>> - codec@11000000 {
>> + mfc: codec@11000000 {
>> compatible = "samsung,mfc-v6";
>> reg = <0x11000000 0x10000>;
>> interrupts = <0 96 0>;
>> @@ -227,7 +227,7 @@
>> clock-names = "mfc";
>> };
>>
>> - rtc@101E0000 {
>> + rtc: rtc@101E0000 {
>> clocks = <&clock CLK_RTC>;
>> clock-names = "rtc";
>> status = "disabled";
>> @@ -261,7 +261,7 @@
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - sata@122F0000 {
>> + sata: sata@122F0000 {
>> compatible = "snps,dwc-ahci";
>> samsung,sata-freq = <66>;
>> reg = <0x122F0000 0x1ff>;
>> @@ -573,7 +573,7 @@
>> #phy-cells = <1>;
>> };
>>
>> - usb@12110000 {
>> + ehci: usb@12110000 {
>
> I'm not sure which one is recommended between above and "ehci: ehci@12110000 {"
>
>> compatible = "samsung,exynos4210-ehci";
>> reg = <0x12110000 0x100>;
>> interrupts = <0 71 0>;
>> @@ -588,7 +588,7 @@
>> };
>> };
>>
>> - usb@12120000 {
>> + ohci: usb@12120000 {
>
> Same as above...
A quick git-grep in v3.16.1 shows both ways used in arch/arm/boot/dts/:
usb@: 232
xhci@: 0
ehci@: 41
ohci@: 60
uhci@: 7
>> compatible = "samsung,exynos4210-ohci";
>> reg = <0x12120000 0x100>;
>> interrupts = <0 71 0>;
>> @@ -725,7 +725,7 @@
>> clock-names = "gscl";
>> };
>>
>> - hdmi {
>> + hdmi: hdmi {
>
> Should be
>
> + hdmi: hdmi@14530000 { ?
Actually, without applying this patch and my follow-up cleanups strictly
using these new labels, we can't rename any of the nodes here, since it
would break the derived .dts files. It was specifically requested in v5
to make this patch here separate from subsequent uses of the new labels
for the benefit of cherry-picking.
So since you don't seem to disagree with the label names that I add
here, I consider renaming nodes outside the scope of this patch.
+1 for reflecting the reg address in the unit address of the hdmi node
as a follow-up to the refactorings, if that does not break any driver
assumptions.
Regards,
Andreas
>> compatible = "samsung,exynos4212-hdmi";
>> reg = <0x14530000 0x70000>;
>> interrupts = <0 95 0>;
>> @@ -751,14 +751,14 @@
>> #phy-cells = <0>;
>> };
>>
>> - dp-controller@145B0000 {
>> + dp: dp-controller@145B0000 {
>> clocks = <&clock CLK_DP>;
>> clock-names = "dp";
>> phys = <&dp_phy>;
>> phy-names = "dp";
>> };
>>
>> - fimd@14400000 {
>> + fimd: fimd@14400000 {
>> clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
>> clock-names = "sclk_fimd", "fimd";
>> };
>> --
>> 2.0.4
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v7] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-22 11:37 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-22 11:37 UTC (permalink / raw)
To: linux-arm-kernel
Am 22.08.2014 12:49, schrieb Kukjin Kim:
> Andreas F?rber wrote:
>>
>> Allows them to be extended by reference.
>>
>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>> ---
>> v6 -> v7:
>> * Dropped uart* labels (Tomasz Figa)
>>
>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>>
>> arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
>> 1 file changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
>> index 492e1eff37bd..42eafd19cfb2 100644
>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> @@ -218,7 +218,7 @@
>> clock-names = "fimg2d";
>> };
>>
>> - codec at 11000000 {
>> + mfc: codec at 11000000 {
>> compatible = "samsung,mfc-v6";
>> reg = <0x11000000 0x10000>;
>> interrupts = <0 96 0>;
>> @@ -227,7 +227,7 @@
>> clock-names = "mfc";
>> };
>>
>> - rtc at 101E0000 {
>> + rtc: rtc at 101E0000 {
>> clocks = <&clock CLK_RTC>;
>> clock-names = "rtc";
>> status = "disabled";
>> @@ -261,7 +261,7 @@
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - sata at 122F0000 {
>> + sata: sata at 122F0000 {
>> compatible = "snps,dwc-ahci";
>> samsung,sata-freq = <66>;
>> reg = <0x122F0000 0x1ff>;
>> @@ -573,7 +573,7 @@
>> #phy-cells = <1>;
>> };
>>
>> - usb at 12110000 {
>> + ehci: usb at 12110000 {
>
> I'm not sure which one is recommended between above and "ehci: ehci at 12110000 {"
>
>> compatible = "samsung,exynos4210-ehci";
>> reg = <0x12110000 0x100>;
>> interrupts = <0 71 0>;
>> @@ -588,7 +588,7 @@
>> };
>> };
>>
>> - usb at 12120000 {
>> + ohci: usb at 12120000 {
>
> Same as above...
A quick git-grep in v3.16.1 shows both ways used in arch/arm/boot/dts/:
usb@: 232
xhci@: 0
ehci@: 41
ohci@: 60
uhci@: 7
>> compatible = "samsung,exynos4210-ohci";
>> reg = <0x12120000 0x100>;
>> interrupts = <0 71 0>;
>> @@ -725,7 +725,7 @@
>> clock-names = "gscl";
>> };
>>
>> - hdmi {
>> + hdmi: hdmi {
>
> Should be
>
> + hdmi: hdmi at 14530000 { ?
Actually, without applying this patch and my follow-up cleanups strictly
using these new labels, we can't rename any of the nodes here, since it
would break the derived .dts files. It was specifically requested in v5
to make this patch here separate from subsequent uses of the new labels
for the benefit of cherry-picking.
So since you don't seem to disagree with the label names that I add
here, I consider renaming nodes outside the scope of this patch.
+1 for reflecting the reg address in the unit address of the hdmi node
as a follow-up to the refactorings, if that does not break any driver
assumptions.
Regards,
Andreas
>> compatible = "samsung,exynos4212-hdmi";
>> reg = <0x14530000 0x70000>;
>> interrupts = <0 95 0>;
>> @@ -751,14 +751,14 @@
>> #phy-cells = <0>;
>> };
>>
>> - dp-controller at 145B0000 {
>> + dp: dp-controller at 145B0000 {
>> clocks = <&clock CLK_DP>;
>> clock-names = "dp";
>> phys = <&dp_phy>;
>> phy-names = "dp";
>> };
>>
>> - fimd at 14400000 {
>> + fimd: fimd at 14400000 {
>> clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
>> clock-names = "sclk_fimd", "fimd";
>> };
>> --
>> 2.0.4
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v7] ARM: dts: Prepare node labels for exynos5250
2014-08-22 10:49 ` Kukjin Kim
@ 2014-08-22 16:14 ` Doug Anderson
-1 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-22 16:14 UTC (permalink / raw)
To: Kukjin Kim
Cc: Andreas Färber, linux-samsung-soc, linux-arm-kernel,
devicetree, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Russell King, open list
Kukjin,
On Fri, Aug 22, 2014 at 3:49 AM, Kukjin Kim <kgene.kim@samsung.com> wrote:
> Andreas Färber wrote:
>>
>> Allows them to be extended by reference.
>>
>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> v6 -> v7:
>> * Dropped uart* labels (Tomasz Figa)
>>
>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>>
>> arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
>> 1 file changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
>> index 492e1eff37bd..42eafd19cfb2 100644
>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> @@ -218,7 +218,7 @@
>> clock-names = "fimg2d";
>> };
>>
>> - codec@11000000 {
>> + mfc: codec@11000000 {
>> compatible = "samsung,mfc-v6";
>> reg = <0x11000000 0x10000>;
>> interrupts = <0 96 0>;
>> @@ -227,7 +227,7 @@
>> clock-names = "mfc";
>> };
>>
>> - rtc@101E0000 {
>> + rtc: rtc@101E0000 {
>> clocks = <&clock CLK_RTC>;
>> clock-names = "rtc";
>> status = "disabled";
>> @@ -261,7 +261,7 @@
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - sata@122F0000 {
>> + sata: sata@122F0000 {
>> compatible = "snps,dwc-ahci";
>> samsung,sata-freq = <66>;
>> reg = <0x122F0000 0x1ff>;
>> @@ -573,7 +573,7 @@
>> #phy-cells = <1>;
>> };
>>
>> - usb@12110000 {
>> + ehci: usb@12110000 {
>
> I'm not sure which one is recommended between above and "ehci: ehci@12110000 {"
My understanding is that more generic names should be used for node
names. AKA: "usb" and not "ehci". "mmc" and not "dwmmc".
In another thread I was pointed at ePAPR
<http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf>:
The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model.
>> - hdmi {
>> + hdmi: hdmi {
>
> Should be
>
> + hdmi: hdmi@14530000 { ?
Seems like that should be a followon patch.
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v7] ARM: dts: Prepare node labels for exynos5250
@ 2014-08-22 16:14 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-22 16:14 UTC (permalink / raw)
To: linux-arm-kernel
Kukjin,
On Fri, Aug 22, 2014 at 3:49 AM, Kukjin Kim <kgene.kim@samsung.com> wrote:
> Andreas F?rber wrote:
>>
>> Allows them to be extended by reference.
>>
>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>> ---
>> v6 -> v7:
>> * Dropped uart* labels (Tomasz Figa)
>>
>> v6: Split off from Snow/SMDK cleanups (Doug Anderson)
>>
>> arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++--------
>> 1 file changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
>> index 492e1eff37bd..42eafd19cfb2 100644
>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> @@ -218,7 +218,7 @@
>> clock-names = "fimg2d";
>> };
>>
>> - codec at 11000000 {
>> + mfc: codec at 11000000 {
>> compatible = "samsung,mfc-v6";
>> reg = <0x11000000 0x10000>;
>> interrupts = <0 96 0>;
>> @@ -227,7 +227,7 @@
>> clock-names = "mfc";
>> };
>>
>> - rtc at 101E0000 {
>> + rtc: rtc at 101E0000 {
>> clocks = <&clock CLK_RTC>;
>> clock-names = "rtc";
>> status = "disabled";
>> @@ -261,7 +261,7 @@
>> clock-names = "uart", "clk_uart_baud0";
>> };
>>
>> - sata at 122F0000 {
>> + sata: sata at 122F0000 {
>> compatible = "snps,dwc-ahci";
>> samsung,sata-freq = <66>;
>> reg = <0x122F0000 0x1ff>;
>> @@ -573,7 +573,7 @@
>> #phy-cells = <1>;
>> };
>>
>> - usb at 12110000 {
>> + ehci: usb at 12110000 {
>
> I'm not sure which one is recommended between above and "ehci: ehci at 12110000 {"
My understanding is that more generic names should be used for node
names. AKA: "usb" and not "ehci". "mmc" and not "dwmmc".
In another thread I was pointed at ePAPR
<http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf>:
The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model.
>> - hdmi {
>> + hdmi: hdmi {
>
> Should be
>
> + hdmi: hdmi at 14530000 { ?
Seems like that should be a followon patch.
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
Use the new style of referencing inherited nodes and use symbolic names.
Reorder one pinctrl node in GPIO order.
Goal is the alignment of all exynos5250 based device trees for comparison.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6:
* Split off label additions (Doug Anderson)
* Fixed alphabetical order of sd3_* nodes (Doug Anderson)
v4 -> v5:
* Introduced labels to consistently use new referencing style (Tomasz Figa)
* Use IRQ_TYPE_* constants
* Use some more GPIO_ACTIVE_*
v3 -> v4: Unchanged
v3: New (Doug Anderson)
arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
1 file changed, 145 insertions(+), 146 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1c36cd72905f..40cad43f8a11 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -6,9 +6,12 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
@@ -26,89 +29,19 @@
chosen {
};
- rtc@101E0000 {
- status = "okay";
- };
-
- pinctrl@11400000 {
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pin-drv = <0>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pin-drv = <0>;
- };
-
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@13400000 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
@@ -129,8 +62,8 @@
i2c-parent = <&{/i2c@12CA0000}>;
- our-claim-gpio = <&gpf0 3 1>;
- their-claim-gpios = <&gpe0 4 1>;
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
@@ -153,7 +86,7 @@
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
@@ -239,19 +172,6 @@
};
};
- i2c@12CD0000 {
- max98095: codec@11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
sound {
compatible = "google,snow-audio-max98095";
@@ -265,20 +185,12 @@
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 0>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
};
- phy@12100000 {
- vbus-supply = <&usb3_vbus_reg>;
- };
-
- usb@12110000 {
- samsung,vbus-gpio = <&gpx1 1 0>;
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -286,19 +198,7 @@
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
@@ -306,42 +206,58 @@
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
+};
- fimd@14400000 {
- status = "okay";
- samsung,invert-vclk;
- };
-
- dp-controller@145B0000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 0>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing@1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing@1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
};
};
};
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
@@ -350,7 +266,7 @@
max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
@@ -500,7 +416,7 @@
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
@@ -547,6 +463,13 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ max98095: codec@11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
};
&i2c_8 {
@@ -560,6 +483,10 @@
};
};
+&i2s0 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
@@ -592,7 +519,7 @@
slot@0 {
reg = <0>;
bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
};
};
@@ -619,12 +546,80 @@
};
&pinctrl_0 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
&spi_1 {
@@ -633,4 +628,8 @@
num-cs = <1>;
};
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
Use the new style of referencing inherited nodes and use symbolic names.
Reorder one pinctrl node in GPIO order.
Goal is the alignment of all exynos5250 based device trees for comparison.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v5 -> v6:
* Split off label additions (Doug Anderson)
* Fixed alphabetical order of sd3_* nodes (Doug Anderson)
v4 -> v5:
* Introduced labels to consistently use new referencing style (Tomasz Figa)
* Use IRQ_TYPE_* constants
* Use some more GPIO_ACTIVE_*
v3 -> v4: Unchanged
v3: New (Doug Anderson)
arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
1 file changed, 145 insertions(+), 146 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1c36cd72905f..40cad43f8a11 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -6,9 +6,12 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
@@ -26,89 +29,19 @@
chosen {
};
- rtc at 101E0000 {
- status = "okay";
- };
-
- pinctrl at 11400000 {
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pin-drv = <0>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pin-drv = <0>;
- };
-
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl at 13400000 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
@@ -129,8 +62,8 @@
i2c-parent = <&{/i2c@12CA0000}>;
- our-claim-gpio = <&gpf0 3 1>;
- their-claim-gpios = <&gpe0 4 1>;
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
@@ -153,7 +86,7 @@
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
@@ -239,19 +172,6 @@
};
};
- i2c at 12CD0000 {
- max98095: codec at 11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
- };
-
- i2s0: i2s at 03830000 {
- status = "okay";
- };
-
sound {
compatible = "google,snow-audio-max98095";
@@ -265,20 +185,12 @@
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 0>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
};
- phy at 12100000 {
- vbus-supply = <&usb3_vbus_reg>;
- };
-
- usb at 12110000 {
- samsung,vbus-gpio = <&gpx1 1 0>;
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -286,19 +198,7 @@
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
@@ -306,42 +206,58 @@
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
+};
- fimd at 14400000 {
- status = "okay";
- samsung,invert-vclk;
- };
-
- dp-controller at 145B0000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 0>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing at 1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing at 1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
};
};
};
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
@@ -350,7 +266,7 @@
max77686 at 09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
@@ -500,7 +416,7 @@
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
@@ -547,6 +463,13 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ max98095: codec at 11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
};
&i2c_8 {
@@ -560,6 +483,10 @@
};
};
+&i2s0 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
@@ -592,7 +519,7 @@
slot at 0 {
reg = <0>;
bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
};
};
@@ -619,12 +546,80 @@
};
&pinctrl_0 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
&spi_1 {
@@ -633,4 +628,8 @@
num-cs = <1>;
};
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Andreas Färber, Russell King, Javier Martinez Canillas,
linux-arm-kernel
Use the new style of referencing inherited nodes and use symbolic names.
Reorder one pinctrl node in GPIO order.
Goal is the alignment of all exynos5250 based device trees for comparison.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6:
* Split off label additions (Doug Anderson)
* Fixed alphabetical order of sd3_* nodes (Doug Anderson)
v4 -> v5:
* Introduced labels to consistently use new referencing style (Tomasz Figa)
* Use IRQ_TYPE_* constants
* Use some more GPIO_ACTIVE_*
v3 -> v4: Unchanged
v3: New (Doug Anderson)
arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
1 file changed, 145 insertions(+), 146 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1c36cd72905f..40cad43f8a11 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -6,9 +6,12 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
@@ -26,89 +29,19 @@
chosen {
};
- rtc@101E0000 {
- status = "okay";
- };
-
- pinctrl@11400000 {
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pin-drv = <0>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pin-drv = <0>;
- };
-
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@13400000 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
@@ -129,8 +62,8 @@
i2c-parent = <&{/i2c@12CA0000}>;
- our-claim-gpio = <&gpf0 3 1>;
- their-claim-gpios = <&gpe0 4 1>;
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
@@ -153,7 +86,7 @@
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
@@ -239,19 +172,6 @@
};
};
- i2c@12CD0000 {
- max98095: codec@11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
sound {
compatible = "google,snow-audio-max98095";
@@ -265,20 +185,12 @@
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 0>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
};
- phy@12100000 {
- vbus-supply = <&usb3_vbus_reg>;
- };
-
- usb@12110000 {
- samsung,vbus-gpio = <&gpx1 1 0>;
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -286,19 +198,7 @@
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
@@ -306,42 +206,58 @@
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
+};
- fimd@14400000 {
- status = "okay";
- samsung,invert-vclk;
- };
-
- dp-controller@145B0000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 0>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing@1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing@1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
};
};
};
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
@@ -350,7 +266,7 @@
max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
@@ -500,7 +416,7 @@
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
@@ -547,6 +463,13 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ max98095: codec@11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
};
&i2c_8 {
@@ -560,6 +483,10 @@
};
};
+&i2s0 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
@@ -592,7 +519,7 @@
slot@0 {
reg = <0>;
bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
};
};
@@ -619,12 +546,80 @@
};
&pinctrl_0 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
&spi_1 {
@@ -633,4 +628,8 @@
num-cs = <1>;
};
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
--
1.9.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 98+ messages in thread* Re: [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 4:54 ` Doug Anderson
-1 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-02 4:54 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, open list
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@suse.de> wrote:
> Use the new style of referencing inherited nodes and use symbolic names.
> Reorder one pinctrl node in GPIO order.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Suggested-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Split off label additions (Doug Anderson)
> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>
> v4 -> v5:
> * Introduced labels to consistently use new referencing style (Tomasz Figa)
> * Use IRQ_TYPE_* constants
> * Use some more GPIO_ACTIVE_*
>
> v3 -> v4: Unchanged
>
> v3: New (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
> 1 file changed, 145 insertions(+), 146 deletions(-)
I'm happy now. :) Thank you for putting up with me...
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
@ 2014-08-02 4:54 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-02 4:54 UTC (permalink / raw)
To: linux-arm-kernel
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas F?rber <afaerber@suse.de> wrote:
> Use the new style of referencing inherited nodes and use symbolic names.
> Reorder one pinctrl node in GPIO order.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Suggested-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Split off label additions (Doug Anderson)
> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>
> v4 -> v5:
> * Introduced labels to consistently use new referencing style (Tomasz Figa)
> * Use IRQ_TYPE_* constants
> * Use some more GPIO_ACTIVE_*
>
> v3 -> v4: Unchanged
>
> v3: New (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
> 1 file changed, 145 insertions(+), 146 deletions(-)
I'm happy now. :) Thank you for putting up with me...
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
@ 2014-08-02 4:54 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-02 4:54 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, open list
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@suse.de> wrote:
> Use the new style of referencing inherited nodes and use symbolic names.
> Reorder one pinctrl node in GPIO order.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Suggested-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Split off label additions (Doug Anderson)
> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>
> v4 -> v5:
> * Introduced labels to consistently use new referencing style (Tomasz Figa)
> * Use IRQ_TYPE_* constants
> * Use some more GPIO_ACTIVE_*
>
> v3 -> v4: Unchanged
>
> v3: New (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
> 1 file changed, 145 insertions(+), 146 deletions(-)
I'm happy now. :) Thank you for putting up with me...
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
2014-08-02 0:52 ` Andreas Färber
@ 2014-08-02 12:21 ` Tomasz Figa
-1 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 12:21 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Russell King, Javier Martinez Canillas, linux-arm-kernel
On 02.08.2014 02:52, Andreas Färber wrote:
> Use the new style of referencing inherited nodes and use symbolic names.
> Reorder one pinctrl node in GPIO order.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Suggested-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Split off label additions (Doug Anderson)
> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>
> v4 -> v5:
> * Introduced labels to consistently use new referencing style (Tomasz Figa)
> * Use IRQ_TYPE_* constants
> * Use some more GPIO_ACTIVE_*
>
> v3 -> v4: Unchanged
>
> v3: New (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
> 1 file changed, 145 insertions(+), 146 deletions(-)
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
@ 2014-08-02 12:21 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 12:21 UTC (permalink / raw)
To: linux-arm-kernel
On 02.08.2014 02:52, Andreas F?rber wrote:
> Use the new style of referencing inherited nodes and use symbolic names.
> Reorder one pinctrl node in GPIO order.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Suggested-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Split off label additions (Doug Anderson)
> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>
> v4 -> v5:
> * Introduced labels to consistently use new referencing style (Tomasz Figa)
> * Use IRQ_TYPE_* constants
> * Use some more GPIO_ACTIVE_*
>
> v3 -> v4: Unchanged
>
> v3: New (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
> 1 file changed, 145 insertions(+), 146 deletions(-)
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
2014-08-02 12:21 ` Tomasz Figa
@ 2014-08-02 12:56 ` Tomasz Figa
-1 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 12:56 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Russell King, Javier Martinez Canillas, linux-arm-kernel
On 02.08.2014 14:21, Tomasz Figa wrote:
> On 02.08.2014 02:52, Andreas Färber wrote:
>> Use the new style of referencing inherited nodes and use symbolic names.
>> Reorder one pinctrl node in GPIO order.
>>
>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>
>> Suggested-by: Doug Anderson <dianders@chromium.org>
>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> v5 -> v6:
>> * Split off label additions (Doug Anderson)
>> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>
>> v4 -> v5:
>> * Introduced labels to consistently use new referencing style (Tomasz Figa)
>> * Use IRQ_TYPE_* constants
>> * Use some more GPIO_ACTIVE_*
>>
>> v3 -> v4: Unchanged
>>
>> v3: New (Doug Anderson)
>>
>> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>> 1 file changed, 145 insertions(+), 146 deletions(-)
>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Just for convenience of other reviewers, here are actual changes done do
the device tree after compiling into dtb and then back into dts:
> --- exynos5250-snow.dtb.dts 2014-08-02 14:54:15.145905921 +0200
> +++ ../dtbs.post/exynos5250-snow.dtb.dts 2014-08-02 14:54:15.146905921 +0200
> @@ -8,6 +8,7 @@
> model = "Google Snow";
>
> chosen {
> + bootargs = "console=tty1";
> };
>
> aliases {
> @@ -829,15 +830,6 @@
> phandle = <0x44>;
> };
>
> - hdmi-hpd-irq {
> - samsung,pins = "gpx3-7";
> - samsung,pin-function = <0x0>;
> - samsung,pin-pud = <0x1>;
> - samsung,pin-drv = <0x0>;
> - linux,phandle = <0x33>;
> - phandle = <0x33>;
> - };
> -
> max77686-irq {
> samsung,pins = "gpx3-2";
> samsung,pin-function = <0x0>;
> @@ -846,6 +838,15 @@
> linux,phandle = <0xe>;
> phandle = <0xe>;
> };
> +
> + hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0x0>;
> + samsung,pin-pud = <0x1>;
> + samsung,pin-drv = <0x0>;
> + linux,phandle = <0x33>;
> + phandle = <0x33>;
> + };
> };
>
> pinctrl@13400000 {
> @@ -1703,12 +1704,12 @@
> samsung,dw-mshc-ciu-div = <0x3>;
> samsung,dw-mshc-sdr-timing = <0x2 0x3>;
> samsung,dw-mshc-ddr-timing = <0x1 0x2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <0x27 0x28 0x29>;
>
> slot@0 {
> reg = <0x0>;
> bus-width = <0x4>;
> - pinctrl-names = "default";
> - pinctrl-0 = <0x27 0x28 0x29>;
> };
> };
>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
@ 2014-08-02 12:56 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 12:56 UTC (permalink / raw)
To: linux-arm-kernel
On 02.08.2014 14:21, Tomasz Figa wrote:
> On 02.08.2014 02:52, Andreas F?rber wrote:
>> Use the new style of referencing inherited nodes and use symbolic names.
>> Reorder one pinctrl node in GPIO order.
>>
>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>
>> Suggested-by: Doug Anderson <dianders@chromium.org>
>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>> ---
>> v5 -> v6:
>> * Split off label additions (Doug Anderson)
>> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>
>> v4 -> v5:
>> * Introduced labels to consistently use new referencing style (Tomasz Figa)
>> * Use IRQ_TYPE_* constants
>> * Use some more GPIO_ACTIVE_*
>>
>> v3 -> v4: Unchanged
>>
>> v3: New (Doug Anderson)
>>
>> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>> 1 file changed, 145 insertions(+), 146 deletions(-)
>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Just for convenience of other reviewers, here are actual changes done do
the device tree after compiling into dtb and then back into dts:
> --- exynos5250-snow.dtb.dts 2014-08-02 14:54:15.145905921 +0200
> +++ ../dtbs.post/exynos5250-snow.dtb.dts 2014-08-02 14:54:15.146905921 +0200
> @@ -8,6 +8,7 @@
> model = "Google Snow";
>
> chosen {
> + bootargs = "console=tty1";
> };
>
> aliases {
> @@ -829,15 +830,6 @@
> phandle = <0x44>;
> };
>
> - hdmi-hpd-irq {
> - samsung,pins = "gpx3-7";
> - samsung,pin-function = <0x0>;
> - samsung,pin-pud = <0x1>;
> - samsung,pin-drv = <0x0>;
> - linux,phandle = <0x33>;
> - phandle = <0x33>;
> - };
> -
> max77686-irq {
> samsung,pins = "gpx3-2";
> samsung,pin-function = <0x0>;
> @@ -846,6 +838,15 @@
> linux,phandle = <0xe>;
> phandle = <0xe>;
> };
> +
> + hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0x0>;
> + samsung,pin-pud = <0x1>;
> + samsung,pin-drv = <0x0>;
> + linux,phandle = <0x33>;
> + phandle = <0x33>;
> + };
> };
>
> pinctrl at 13400000 {
> @@ -1703,12 +1704,12 @@
> samsung,dw-mshc-ciu-div = <0x3>;
> samsung,dw-mshc-sdr-timing = <0x2 0x3>;
> samsung,dw-mshc-ddr-timing = <0x1 0x2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <0x27 0x28 0x29>;
>
> slot at 0 {
> reg = <0x0>;
> bus-width = <0x4>;
> - pinctrl-names = "default";
> - pinctrl-0 = <0x27 0x28 0x29>;
> };
> };
>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
2014-08-02 12:56 ` Tomasz Figa
@ 2014-08-02 13:08 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 13:08 UTC (permalink / raw)
To: Tomasz Figa, linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Russell King, Javier Martinez Canillas, linux-arm-kernel
Am 02.08.2014 14:56, schrieb Tomasz Figa:
> On 02.08.2014 14:21, Tomasz Figa wrote:
>> On 02.08.2014 02:52, Andreas Färber wrote:
>>> Use the new style of referencing inherited nodes and use symbolic names.
>>> Reorder one pinctrl node in GPIO order.
>>>
>>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>>
>>> Suggested-by: Doug Anderson <dianders@chromium.org>
>>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>>> ---
>>> v5 -> v6:
>>> * Split off label additions (Doug Anderson)
>>> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>>
>>> v4 -> v5:
>>> * Introduced labels to consistently use new referencing style (Tomasz Figa)
>>> * Use IRQ_TYPE_* constants
>>> * Use some more GPIO_ACTIVE_*
>>>
>>> v3 -> v4: Unchanged
>>>
>>> v3: New (Doug Anderson)
>>>
>>> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>>> 1 file changed, 145 insertions(+), 146 deletions(-)
>>
>> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
>
> Just for convenience of other reviewers, here are actual changes done do
> the device tree after compiling into dtb and then back into dts:
Erm, to not confuse reviewers, this must be over the whole series:
>> --- exynos5250-snow.dtb.dts 2014-08-02 14:54:15.145905921 +0200
>> +++ ../dtbs.post/exynos5250-snow.dtb.dts 2014-08-02 14:54:15.146905921 +0200
>> @@ -8,6 +8,7 @@
>> model = "Google Snow";
>>
>> chosen {
>> + bootargs = "console=tty1";
>> };
>>
>> aliases {
This is optional follow-on patch 05/10.
>> @@ -829,15 +830,6 @@
>> phandle = <0x44>;
>> };
>>
>> - hdmi-hpd-irq {
>> - samsung,pins = "gpx3-7";
>> - samsung,pin-function = <0x0>;
>> - samsung,pin-pud = <0x1>;
>> - samsung,pin-drv = <0x0>;
>> - linux,phandle = <0x33>;
>> - phandle = <0x33>;
>> - };
>> -
>> max77686-irq {
>> samsung,pins = "gpx3-2";
>> samsung,pin-function = <0x0>;
>> @@ -846,6 +838,15 @@
>> linux,phandle = <0xe>;
>> phandle = <0xe>;
>> };
>> +
>> + hdmi-hpd-irq {
>> + samsung,pins = "gpx3-7";
>> + samsung,pin-function = <0x0>;
>> + samsung,pin-pud = <0x1>;
>> + samsung,pin-drv = <0x0>;
>> + linux,phandle = <0x33>;
>> + phandle = <0x33>;
>> + };
>> };
>>
>> pinctrl@13400000 {
This is this patch 04/10. Just a movement.
>> @@ -1703,12 +1704,12 @@
>> samsung,dw-mshc-ciu-div = <0x3>;
>> samsung,dw-mshc-sdr-timing = <0x2 0x3>;
>> samsung,dw-mshc-ddr-timing = <0x1 0x2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <0x27 0x28 0x29>;
>>
>> slot@0 {
>> reg = <0x0>;
>> bus-width = <0x4>;
>> - pinctrl-names = "default";
>> - pinctrl-0 = <0x27 0x28 0x29>;
>> };
>> };
>>
This is preceding patch 01/10.
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
@ 2014-08-02 13:08 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 13:08 UTC (permalink / raw)
To: linux-arm-kernel
Am 02.08.2014 14:56, schrieb Tomasz Figa:
> On 02.08.2014 14:21, Tomasz Figa wrote:
>> On 02.08.2014 02:52, Andreas F?rber wrote:
>>> Use the new style of referencing inherited nodes and use symbolic names.
>>> Reorder one pinctrl node in GPIO order.
>>>
>>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>>
>>> Suggested-by: Doug Anderson <dianders@chromium.org>
>>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>>> ---
>>> v5 -> v6:
>>> * Split off label additions (Doug Anderson)
>>> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>>
>>> v4 -> v5:
>>> * Introduced labels to consistently use new referencing style (Tomasz Figa)
>>> * Use IRQ_TYPE_* constants
>>> * Use some more GPIO_ACTIVE_*
>>>
>>> v3 -> v4: Unchanged
>>>
>>> v3: New (Doug Anderson)
>>>
>>> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>>> 1 file changed, 145 insertions(+), 146 deletions(-)
>>
>> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
>
> Just for convenience of other reviewers, here are actual changes done do
> the device tree after compiling into dtb and then back into dts:
Erm, to not confuse reviewers, this must be over the whole series:
>> --- exynos5250-snow.dtb.dts 2014-08-02 14:54:15.145905921 +0200
>> +++ ../dtbs.post/exynos5250-snow.dtb.dts 2014-08-02 14:54:15.146905921 +0200
>> @@ -8,6 +8,7 @@
>> model = "Google Snow";
>>
>> chosen {
>> + bootargs = "console=tty1";
>> };
>>
>> aliases {
This is optional follow-on patch 05/10.
>> @@ -829,15 +830,6 @@
>> phandle = <0x44>;
>> };
>>
>> - hdmi-hpd-irq {
>> - samsung,pins = "gpx3-7";
>> - samsung,pin-function = <0x0>;
>> - samsung,pin-pud = <0x1>;
>> - samsung,pin-drv = <0x0>;
>> - linux,phandle = <0x33>;
>> - phandle = <0x33>;
>> - };
>> -
>> max77686-irq {
>> samsung,pins = "gpx3-2";
>> samsung,pin-function = <0x0>;
>> @@ -846,6 +838,15 @@
>> linux,phandle = <0xe>;
>> phandle = <0xe>;
>> };
>> +
>> + hdmi-hpd-irq {
>> + samsung,pins = "gpx3-7";
>> + samsung,pin-function = <0x0>;
>> + samsung,pin-pud = <0x1>;
>> + samsung,pin-drv = <0x0>;
>> + linux,phandle = <0x33>;
>> + phandle = <0x33>;
>> + };
>> };
>>
>> pinctrl at 13400000 {
This is this patch 04/10. Just a movement.
>> @@ -1703,12 +1704,12 @@
>> samsung,dw-mshc-ciu-div = <0x3>;
>> samsung,dw-mshc-sdr-timing = <0x2 0x3>;
>> samsung,dw-mshc-ddr-timing = <0x1 0x2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <0x27 0x28 0x29>;
>>
>> slot at 0 {
>> reg = <0x0>;
>> bus-width = <0x4>;
>> - pinctrl-names = "default";
>> - pinctrl-0 = <0x27 0x28 0x29>;
>> };
>> };
>>
This is preceding patch 01/10.
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
2014-08-02 13:08 ` Andreas Färber
@ 2014-08-02 13:09 ` Tomasz Figa
-1 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:09 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Russell King, Javier Martinez Canillas, linux-arm-kernel
On 02.08.2014 15:08, Andreas Färber wrote:
> Am 02.08.2014 14:56, schrieb Tomasz Figa:
>> On 02.08.2014 14:21, Tomasz Figa wrote:
>>> On 02.08.2014 02:52, Andreas Färber wrote:
>>>> Use the new style of referencing inherited nodes and use symbolic names.
>>>> Reorder one pinctrl node in GPIO order.
>>>>
>>>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>>>
>>>> Suggested-by: Doug Anderson <dianders@chromium.org>
>>>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>>>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>>>> ---
>>>> v5 -> v6:
>>>> * Split off label additions (Doug Anderson)
>>>> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>>>
>>>> v4 -> v5:
>>>> * Introduced labels to consistently use new referencing style (Tomasz Figa)
>>>> * Use IRQ_TYPE_* constants
>>>> * Use some more GPIO_ACTIVE_*
>>>>
>>>> v3 -> v4: Unchanged
>>>>
>>>> v3: New (Doug Anderson)
>>>>
>>>> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>>>> 1 file changed, 145 insertions(+), 146 deletions(-)
>>>
>>> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
>>
>> Just for convenience of other reviewers, here are actual changes done do
>> the device tree after compiling into dtb and then back into dts:
>
> Erm, to not confuse reviewers, this must be over the whole series:
Erm, right, I have forgot to state this, sorry. Similarly for other dtb
diffs.
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
@ 2014-08-02 13:09 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:09 UTC (permalink / raw)
To: linux-arm-kernel
On 02.08.2014 15:08, Andreas F?rber wrote:
> Am 02.08.2014 14:56, schrieb Tomasz Figa:
>> On 02.08.2014 14:21, Tomasz Figa wrote:
>>> On 02.08.2014 02:52, Andreas F?rber wrote:
>>>> Use the new style of referencing inherited nodes and use symbolic names.
>>>> Reorder one pinctrl node in GPIO order.
>>>>
>>>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>>>
>>>> Suggested-by: Doug Anderson <dianders@chromium.org>
>>>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>>>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>>>> ---
>>>> v5 -> v6:
>>>> * Split off label additions (Doug Anderson)
>>>> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>>>
>>>> v4 -> v5:
>>>> * Introduced labels to consistently use new referencing style (Tomasz Figa)
>>>> * Use IRQ_TYPE_* constants
>>>> * Use some more GPIO_ACTIVE_*
>>>>
>>>> v3 -> v4: Unchanged
>>>>
>>>> v3: New (Doug Anderson)
>>>>
>>>> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>>>> 1 file changed, 145 insertions(+), 146 deletions(-)
>>>
>>> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
>>
>> Just for convenience of other reviewers, here are actual changes done do
>> the device tree after compiling into dtb and then back into dts:
>
> Erm, to not confuse reviewers, this must be over the whole series:
Erm, right, I have forgot to state this, sorry. Similarly for other dtb
diffs.
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 05/10] ARM: dts: Fill in bootargs for exynos5250-snow
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
exynos5250-cros-common.dtsi had an empty /chosen node.
Fill in exemplary boot arguments.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Cleanup for /chosen node moved into -snow.dts.
arch/arm/boot/dts/exynos5250-snow.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 40cad43f8a11..8d8e62de86c7 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -27,6 +27,7 @@
};
chosen {
+ bootargs = "console=tty1";
};
gpio-keys {
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 05/10] ARM: dts: Fill in bootargs for exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
exynos5250-cros-common.dtsi had an empty /chosen node.
Fill in exemplary boot arguments.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Cleanup for /chosen node moved into -snow.dts.
arch/arm/boot/dts/exynos5250-snow.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 40cad43f8a11..8d8e62de86c7 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -27,6 +27,7 @@
};
chosen {
+ bootargs = "console=tty1";
};
gpio-keys {
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 05/10] ARM: dts: Fill in bootargs for exynos5250-snow
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: Mark Rutland, devicetree, Kukjin Kim, Vincent Palatin,
Pawel Moll, Ian Campbell, open list, Tomasz Figa, Kumar Gala,
Stephan van Schaik, Doug Anderson, Rob Herring, Ben Dooks,
Andreas Färber, Russell King, Javier Martinez Canillas,
linux-arm-kernel
exynos5250-cros-common.dtsi had an empty /chosen node.
Fill in exemplary boot arguments.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Cleanup for /chosen node moved into -snow.dts.
arch/arm/boot/dts/exynos5250-snow.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 40cad43f8a11..8d8e62de86c7 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -27,6 +27,7 @@
};
chosen {
+ bootargs = "console=tty1";
};
gpio-keys {
--
1.9.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 98+ messages in thread* Re: [PATCH v6 05/10] ARM: dts: Fill in bootargs for exynos5250-snow
2014-08-02 0:52 ` Andreas Färber
@ 2014-08-02 2:17 ` Javier Martinez Canillas
-1 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-02 2:17 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Tomasz Figa, Ben Dooks,
Kukjin Kim, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Russell King, open list
Hello Andreas,
Sorry for missing your v5.
On 08/02/2014 02:52 AM, Andreas Färber wrote:
>
> chosen {
> + bootargs = "console=tty1";
> };
While I agree with you that having a chosen node with a default bootargs is
better than having an empty one, I second Doug that this bootargs is not very
useful.
If you want to add a bootargs in the DTS I think that it should be a complete
kernel command line that allows to boot a system. I would at least add a root
parameter and possibly another console for the serial port. So if
CMDLINE_FROM_BOOTLOADER is not set then the DT can be used to specify the
bootargs instead of using whatever was set in CONFIG_CMDLINE which probably
won't be relevant for every system on a multi-platform kernel.
But I think that is safe to rely on the bootloader to set the bootargs and after
all having a hardcoded bootargs in the DTS is not much better than having a
hardcoded CONFIG_CMDLINE since as Doug said it is hard to make assumptions about
what would be the most common options.
Personally I would just drop this change and as I said before remove the empty
chosen node on a follow up patch but I don't have a strong opinion either.
Best regards,
Javier
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 05/10] ARM: dts: Fill in bootargs for exynos5250-snow
@ 2014-08-02 2:17 ` Javier Martinez Canillas
0 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-02 2:17 UTC (permalink / raw)
To: linux-arm-kernel
Hello Andreas,
Sorry for missing your v5.
On 08/02/2014 02:52 AM, Andreas F?rber wrote:
>
> chosen {
> + bootargs = "console=tty1";
> };
While I agree with you that having a chosen node with a default bootargs is
better than having an empty one, I second Doug that this bootargs is not very
useful.
If you want to add a bootargs in the DTS I think that it should be a complete
kernel command line that allows to boot a system. I would at least add a root
parameter and possibly another console for the serial port. So if
CMDLINE_FROM_BOOTLOADER is not set then the DT can be used to specify the
bootargs instead of using whatever was set in CONFIG_CMDLINE which probably
won't be relevant for every system on a multi-platform kernel.
But I think that is safe to rely on the bootloader to set the bootargs and after
all having a hardcoded bootargs in the DTS is not much better than having a
hardcoded CONFIG_CMDLINE since as Doug said it is hard to make assumptions about
what would be the most common options.
Personally I would just drop this change and as I said before remove the empty
chosen node on a follow up patch but I don't have a strong opinion either.
Best regards,
Javier
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 06/10] ARM: dts: Clean up exynos5250-smdk5250
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
Use the new style for referencing inherited nodes and use symbolic names.
Goal is the alignment of all exynos5250 based device trees for comparison.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6:
* Renamed node label codec -> mfc for alignment with "add System MMU nodes"
* Rebased for leaving dp_hpd in .dtsi
v5: New
Follow-up after adding dp_hpd pinctrl node new-style.
arch/arm/boot/dts/exynos5250-smdk5250.dts | 632 +++++++++++++++---------------
1 file changed, 318 insertions(+), 314 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index aaa055ac0fe3..6bcd64ff2ded 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -7,9 +7,11 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
/ {
@@ -27,165 +29,6 @@
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x50>;
- };
-
- max77686@09 {
- compatible = "maxim,max77686";
- reg = <0x09>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.2V_LDO_OUT2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "P2.8V_LDO_OUT4";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "P1.8V_LDO_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "P1.1V_LDO_OUT6";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "P1.8V_LDO_OUT11";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "P1.8V_LDO_OUT13";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
- };
-
vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
@@ -210,207 +53,368 @@
regulator-always-on;
};
- i2c@12C70000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
+ sound {
+ compatible = "samsung,smdk-wm8994";
- eeprom@51 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x51>;
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&wm8994>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
};
- wm8994: wm8994@1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
+ codec_mclk: codec-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16934000>;
+ };
+ };
+};
- gpio-controller;
- #gpio-cells = <2>;
+&dp {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ status = "okay";
+};
- clocks = <&codec_mclk>;
- clock-names = "MCLK1";
+&ehci {
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
- AVDD2-supply = <&vdd>;
- CPVDD-supply = <&vdd>;
- DBVDD-supply = <&dbvdd>;
- SPKVDD1-supply = <&spkvdd>;
- SPKVDD2-supply = <&spkvdd>;
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 1280x800 */
+ clock-frequency = <50000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <4>;
+ hback-porch = <4>;
+ hsync-len = <4>;
+ vback-porch = <4>;
+ vfront-porch = <4>;
+ vsync-len = <4>;
};
};
+};
- i2c@121D0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
- status = "okay";
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+};
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+
+ eeprom@50 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x50>;
};
- i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.2V_LDO_OUT2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
- i2c@12CE0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
+ ldo4_reg: LDO4 {
+ regulator-name = "P2.8V_LDO_OUT4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
- sata@122F0000 {
- status = "okay";
- };
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.8V_LDO_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
+ ldo6_reg: LDO6 {
+ regulator-name = "P1.1V_LDO_OUT6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- spi_1: spi@12d30000 {
- status = "okay";
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- w25q80bw@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
- controller-data {
- cs-gpio = <&gpa2 5 0>;
- samsung,spi-feedback-delay = <0>;
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
};
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
+ eeprom@51 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x51>;
};
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ wm8994: wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&codec_mclk>;
+ clock-names = "MCLK1";
+
+ AVDD2-supply = <&vdd>;
+ CPVDD-supply = <&vdd>;
+ DBVDD-supply = <&dbvdd>;
+ SPKVDD1-supply = <&spkvdd>;
+ SPKVDD2-supply = <&spkvdd>;
};
+};
- i2s0: i2s@03830000 {
- status = "okay";
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
};
+};
- sound {
- compatible = "samsung,smdk-wm8994";
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
- samsung,i2s-controller = <&i2s0>;
- samsung,audio-codec = <&wm8994>;
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
};
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
- usb@12110000 {
- samsung,vbus-gpio = <&gpx2 6 0>;
+ sata_phy_i2c: sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
};
+};
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- status = "okay";
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
};
+};
- fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 1280x800 */
- clock-frequency = <50000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <4>;
- hback-porch = <4>;
- hsync-len = <4>;
- vback-porch = <4>;
- vfront-porch = <4>;
- vsync-len = <4>;
- };
- };
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
+};
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <24000000>;
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&spi_1 {
+ status = "okay";
+
+ w25q80bw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ cs-gpio = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+ samsung,spi-feedback-delay = <0>;
};
- codec_mclk: codec-mclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <16934000>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 06/10] ARM: dts: Clean up exynos5250-smdk5250
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
Use the new style for referencing inherited nodes and use symbolic names.
Goal is the alignment of all exynos5250 based device trees for comparison.
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v5 -> v6:
* Renamed node label codec -> mfc for alignment with "add System MMU nodes"
* Rebased for leaving dp_hpd in .dtsi
v5: New
Follow-up after adding dp_hpd pinctrl node new-style.
arch/arm/boot/dts/exynos5250-smdk5250.dts | 632 +++++++++++++++---------------
1 file changed, 318 insertions(+), 314 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index aaa055ac0fe3..6bcd64ff2ded 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -7,9 +7,11 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
/ {
@@ -27,165 +29,6 @@
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
- rtc at 101E0000 {
- status = "okay";
- };
-
- i2c at 12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
-
- eeprom at 50 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x50>;
- };
-
- max77686 at 09 {
- compatible = "maxim,max77686";
- reg = <0x09>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.2V_LDO_OUT2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "P2.8V_LDO_OUT4";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "P1.8V_LDO_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "P1.1V_LDO_OUT6";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "P1.8V_LDO_OUT11";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "P1.8V_LDO_OUT13";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
- };
-
vdd: fixed-regulator at 0 {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
@@ -210,207 +53,368 @@
regulator-always-on;
};
- i2c at 12C70000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
+ sound {
+ compatible = "samsung,smdk-wm8994";
- eeprom at 51 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x51>;
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&wm8994>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
};
- wm8994: wm8994 at 1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
+ codec_mclk: codec-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16934000>;
+ };
+ };
+};
- gpio-controller;
- #gpio-cells = <2>;
+&dp {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ status = "okay";
+};
- clocks = <&codec_mclk>;
- clock-names = "MCLK1";
+&ehci {
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
- AVDD2-supply = <&vdd>;
- CPVDD-supply = <&vdd>;
- DBVDD-supply = <&dbvdd>;
- SPKVDD1-supply = <&spkvdd>;
- SPKVDD2-supply = <&spkvdd>;
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing at 0 {
+ /* 1280x800 */
+ clock-frequency = <50000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <4>;
+ hback-porch = <4>;
+ hsync-len = <4>;
+ vback-porch = <4>;
+ vfront-porch = <4>;
+ vsync-len = <4>;
};
};
+};
- i2c at 121D0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
- status = "okay";
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+};
- sata_phy_i2c:sata-phy at 38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+
+ eeprom at 50 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x50>;
};
- i2c at 12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ max77686 at 09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- hdmiddc at 50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.2V_LDO_OUT2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
- i2c at 12CE0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- hdmiphy at 38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
+ ldo4_reg: LDO4 {
+ regulator-name = "P2.8V_LDO_OUT4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
- sata at 122F0000 {
- status = "okay";
- };
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.8V_LDO_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- sata-phy at 12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
+ ldo6_reg: LDO6 {
+ regulator-name = "P1.1V_LDO_OUT6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc at 12200000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
- slot at 0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc at 12220000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot at 0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- spi_1: spi at 12d30000 {
- status = "okay";
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- w25q80bw at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
- controller-data {
- cs-gpio = <&gpa2 5 0>;
- samsung,spi-feedback-delay = <0>;
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition at 0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition at 40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
};
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
+ eeprom at 51 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x51>;
};
- codec at 11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ wm8994: wm8994 at 1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&codec_mclk>;
+ clock-names = "MCLK1";
+
+ AVDD2-supply = <&vdd>;
+ CPVDD-supply = <&vdd>;
+ DBVDD-supply = <&dbvdd>;
+ SPKVDD1-supply = <&spkvdd>;
+ SPKVDD2-supply = <&spkvdd>;
};
+};
- i2s0: i2s at 03830000 {
- status = "okay";
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc at 50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
};
+};
- sound {
- compatible = "samsung,smdk-wm8994";
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
- samsung,i2s-controller = <&i2s0>;
- samsung,audio-codec = <&wm8994>;
+ hdmiphy at 38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
};
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
- usb at 12110000 {
- samsung,vbus-gpio = <&gpx2 6 0>;
+ sata_phy_i2c: sata-phy at 38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
};
+};
- dp-controller at 145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- status = "okay";
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <8>;
};
+};
- fimd at 14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing at 0 {
- /* 1280x800 */
- clock-frequency = <50000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <4>;
- hback-porch = <4>;
- hsync-len = <4>;
- vback-porch = <4>;
- vfront-porch = <4>;
- vsync-len = <4>;
- };
- };
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
+};
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <24000000>;
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&spi_1 {
+ status = "okay";
+
+ w25q80bw at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ cs-gpio = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+ samsung,spi-feedback-delay = <0>;
};
- codec_mclk: codec-mclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <16934000>;
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 06/10] ARM: dts: Clean up exynos5250-smdk5250
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
Use the new style for referencing inherited nodes and use symbolic names.
Goal is the alignment of all exynos5250 based device trees for comparison.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6:
* Renamed node label codec -> mfc for alignment with "add System MMU nodes"
* Rebased for leaving dp_hpd in .dtsi
v5: New
Follow-up after adding dp_hpd pinctrl node new-style.
arch/arm/boot/dts/exynos5250-smdk5250.dts | 632 +++++++++++++++---------------
1 file changed, 318 insertions(+), 314 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index aaa055ac0fe3..6bcd64ff2ded 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -7,9 +7,11 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
/ {
@@ -27,165 +29,6 @@
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x50>;
- };
-
- max77686@09 {
- compatible = "maxim,max77686";
- reg = <0x09>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.2V_LDO_OUT2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "P2.8V_LDO_OUT4";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "P1.8V_LDO_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "P1.1V_LDO_OUT6";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "P1.8V_LDO_OUT11";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "P1.8V_LDO_OUT13";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
- };
-
vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
@@ -210,207 +53,368 @@
regulator-always-on;
};
- i2c@12C70000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
+ sound {
+ compatible = "samsung,smdk-wm8994";
- eeprom@51 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x51>;
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&wm8994>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
};
- wm8994: wm8994@1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
+ codec_mclk: codec-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16934000>;
+ };
+ };
+};
- gpio-controller;
- #gpio-cells = <2>;
+&dp {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ status = "okay";
+};
- clocks = <&codec_mclk>;
- clock-names = "MCLK1";
+&ehci {
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
- AVDD2-supply = <&vdd>;
- CPVDD-supply = <&vdd>;
- DBVDD-supply = <&dbvdd>;
- SPKVDD1-supply = <&spkvdd>;
- SPKVDD2-supply = <&spkvdd>;
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 1280x800 */
+ clock-frequency = <50000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <4>;
+ hback-porch = <4>;
+ hsync-len = <4>;
+ vback-porch = <4>;
+ vfront-porch = <4>;
+ vsync-len = <4>;
};
};
+};
- i2c@121D0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
- status = "okay";
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+};
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+
+ eeprom@50 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x50>;
};
- i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.2V_LDO_OUT2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
- i2c@12CE0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
+ ldo4_reg: LDO4 {
+ regulator-name = "P2.8V_LDO_OUT4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
- sata@122F0000 {
- status = "okay";
- };
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.8V_LDO_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
+ ldo6_reg: LDO6 {
+ regulator-name = "P1.1V_LDO_OUT6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- spi_1: spi@12d30000 {
- status = "okay";
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- w25q80bw@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
- controller-data {
- cs-gpio = <&gpa2 5 0>;
- samsung,spi-feedback-delay = <0>;
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
};
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
+ eeprom@51 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x51>;
};
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ wm8994: wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&codec_mclk>;
+ clock-names = "MCLK1";
+
+ AVDD2-supply = <&vdd>;
+ CPVDD-supply = <&vdd>;
+ DBVDD-supply = <&dbvdd>;
+ SPKVDD1-supply = <&spkvdd>;
+ SPKVDD2-supply = <&spkvdd>;
};
+};
- i2s0: i2s@03830000 {
- status = "okay";
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
};
+};
- sound {
- compatible = "samsung,smdk-wm8994";
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
- samsung,i2s-controller = <&i2s0>;
- samsung,audio-codec = <&wm8994>;
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
};
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
- usb@12110000 {
- samsung,vbus-gpio = <&gpx2 6 0>;
+ sata_phy_i2c: sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
};
+};
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- status = "okay";
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
};
+};
- fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 1280x800 */
- clock-frequency = <50000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <4>;
- hback-porch = <4>;
- hsync-len = <4>;
- vback-porch = <4>;
- vfront-porch = <4>;
- vsync-len = <4>;
- };
- };
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
+};
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <24000000>;
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&spi_1 {
+ status = "okay";
+
+ w25q80bw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ cs-gpio = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+ samsung,spi-feedback-delay = <0>;
};
- codec_mclk: codec-mclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <16934000>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* Re: [PATCH v6 06/10] ARM: dts: Clean up exynos5250-smdk5250
2014-08-02 0:52 ` Andreas Färber
@ 2014-08-02 12:57 ` Tomasz Figa
-1 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 12:57 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, open list
On 02.08.2014 02:52, Andreas Färber wrote:
> Use the new style for referencing inherited nodes and use symbolic names.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Renamed node label codec -> mfc for alignment with "add System MMU nodes"
> * Rebased for leaving dp_hpd in .dtsi
>
> v5: New
> Follow-up after adding dp_hpd pinctrl node new-style.
>
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 632 +++++++++++++++---------------
> 1 file changed, 318 insertions(+), 314 deletions(-)
This in fact ends up with empty diff after compiling and decompiling the
dts, so obviously will not break anything. :)
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 06/10] ARM: dts: Clean up exynos5250-smdk5250
@ 2014-08-02 12:57 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 12:57 UTC (permalink / raw)
To: linux-arm-kernel
On 02.08.2014 02:52, Andreas F?rber wrote:
> Use the new style for referencing inherited nodes and use symbolic names.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Renamed node label codec -> mfc for alignment with "add System MMU nodes"
> * Rebased for leaving dp_hpd in .dtsi
>
> v5: New
> Follow-up after adding dp_hpd pinctrl node new-style.
>
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 632 +++++++++++++++---------------
> 1 file changed, 318 insertions(+), 314 deletions(-)
This in fact ends up with empty diff after compiling and decompiling the
dts, so obviously will not break anything. :)
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
Use the new style of referencing inherited nodes, use symbolic names,
tidy indentation and reorder includes.
Goal is the alignment of all exynos5250 based device trees for comparison.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6:
* Updated for mfc node label
v5: New
Aligns with SMDK.
arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
1 file changed, 466 insertions(+), 463 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d0de1f50d15b..aac41c394d43 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -7,12 +7,13 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
-#include "exynos5250.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -26,473 +27,52 @@
bootargs = "console=ttySAC2,115200";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- samsung,i2c-slave-addr = <0x66>;
- status = "okay";
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- vinb1-supply = <&main_dc_reg>;
- vinb2-supply = <&main_dc_reg>;
- vinb3-supply = <&main_dc_reg>;
- vinb4-supply = <&main_dc_reg>;
- vinb5-supply = <&main_dc_reg>;
- vinb6-supply = <&main_dc_reg>;
- vinb7-supply = <&main_dc_reg>;
- vinb8-supply = <&main_dc_reg>;
- vinb9-supply = <&main_dc_reg>;
-
- vinl1-supply = <&buck7_reg>;
- vinl2-supply = <&buck7_reg>;
- vinl3-supply = <&buck7_reg>;
- vinl4-supply = <&main_dc_reg>;
- vinl5-supply = <&main_dc_reg>;
- vinl6-supply = <&main_dc_reg>;
- vinl7-supply = <&main_dc_reg>;
- vinl8-supply = <&buck8_reg>;
- vinl9-supply = <&buck8_reg>;
-
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
- s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
- <&gpd1 1 0>,
- <&gpd1 2 0>;
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_28IO_DP_1.35V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD_COMMON1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD_IOPERI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD_MPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD_XPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD_COMMON2_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD_33ON_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD_COMMON3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_ABB2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_USB_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_COMMON4_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDDQ_MMC2_3_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "VDD_33ON_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "EXT_33_OFF";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "EXT_28_OFF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "PVDD_LDO25";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- op_mode = <1>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "EXT_18_OFF";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- op_mode = <1>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_MEM_1.35V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1355000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "PVDD_BUCK7";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "PVDD_BUCK8";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_33_OFF_EXT1";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
- };
- };
- };
-
- i2c@12C80000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
-
- wm1811a@1a {
-
- compatible = "wlf,wm1811";
- reg = <0x1a>;
-
- AVDD2-supply = <&main_dc_reg>;
- CPVDD-supply = <&main_dc_reg>;
- DBVDD1-supply = <&main_dc_reg>;
- DBVDD2-supply = <&main_dc_reg>;
- DBVDD3-supply = <&main_dc_reg>;
- LDO1VDD-supply = <&main_dc_reg>;
- SPKVDD1-supply = <&main_dc_reg>;
- SPKVDD2-supply = <&main_dc_reg>;
-
- wlf,ldo1ena = <&gpb0 0 0>;
- wlf,ldo2ena = <&gpb0 1 0>;
- };
- };
-
- i2c@12CE0000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x38>;
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- i2c@121D0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
- };
-
- sata@122F0000 {
- status = "okay";
- };
-
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
-
- mmc_0: mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
-
- mmc_2: mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
menu {
label = "SW-TACT2";
- gpios = <&gpx1 4 1>;
+ gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
home {
label = "SW-TACT3";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
up {
label = "SW-TACT4";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "SW-TACT5";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "SW-TACT6";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
wakeup {
label = "SW-TACT7";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 2>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- vdd-supply = <&ldo8_reg>;
- };
-
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -510,7 +90,7 @@
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 1>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -528,35 +108,6 @@
};
};
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
- };
-
- fimd: fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 2560x1600 DP panel */
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
- };
- };
-
usb_hub_bus {
compatible = "simple-bus";
#address-cells = <1>;
@@ -566,12 +117,464 @@
usb_hub: usb_hub {
compatible = "smsc,usb3503a";
- reset-gpios = <&gpx3 5 1>;
- connect-gpios = <&gpd1 7 1>;
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+};
+
+&ehci {
+ usb-phy = <&usb2_phy>;
+};
+
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 2560x1600 DP panel */
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
+ };
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 2>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "EXT_33_OFF";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "EXT_28_OFF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "EXT_18_OFF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_33_OFF_EXT1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
};
};
+};
+
+&i2c_2 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+
+ wm1811a@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+
+ AVDD2-supply = <&main_dc_reg>;
+ CPVDD-supply = <&main_dc_reg>;
+ DBVDD1-supply = <&main_dc_reg>;
+ DBVDD2-supply = <&main_dc_reg>;
+ DBVDD3-supply = <&main_dc_reg>;
+ LDO1VDD-supply = <&main_dc_reg>;
+ SPKVDD1-supply = <&main_dc_reg>;
+ SPKVDD2-supply = <&main_dc_reg>;
+
+ wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+ wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata_phy_i2c:sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
- usb@12110000 {
- usb-phy = <&usb2_phy>;
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
Use the new style of referencing inherited nodes, use symbolic names,
tidy indentation and reorder includes.
Goal is the alignment of all exynos5250 based device trees for comparison.
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v5 -> v6:
* Updated for mfc node label
v5: New
Aligns with SMDK.
arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
1 file changed, 466 insertions(+), 463 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d0de1f50d15b..aac41c394d43 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -7,12 +7,13 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
-#include "exynos5250.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -26,473 +27,52 @@
bootargs = "console=ttySAC2,115200";
};
- rtc at 101E0000 {
- status = "okay";
- };
-
- codec at 11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- i2c at 12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- samsung,i2c-slave-addr = <0x66>;
- status = "okay";
-
- s5m8767_pmic at 66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- vinb1-supply = <&main_dc_reg>;
- vinb2-supply = <&main_dc_reg>;
- vinb3-supply = <&main_dc_reg>;
- vinb4-supply = <&main_dc_reg>;
- vinb5-supply = <&main_dc_reg>;
- vinb6-supply = <&main_dc_reg>;
- vinb7-supply = <&main_dc_reg>;
- vinb8-supply = <&main_dc_reg>;
- vinb9-supply = <&main_dc_reg>;
-
- vinl1-supply = <&buck7_reg>;
- vinl2-supply = <&buck7_reg>;
- vinl3-supply = <&buck7_reg>;
- vinl4-supply = <&main_dc_reg>;
- vinl5-supply = <&main_dc_reg>;
- vinl6-supply = <&main_dc_reg>;
- vinl7-supply = <&main_dc_reg>;
- vinl8-supply = <&buck8_reg>;
- vinl9-supply = <&buck8_reg>;
-
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
- s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
- <&gpd1 1 0>,
- <&gpd1 2 0>;
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_28IO_DP_1.35V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD_COMMON1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD_IOPERI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD_MPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD_XPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD_COMMON2_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD_33ON_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD_COMMON3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_ABB2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_USB_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_COMMON4_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDDQ_MMC2_3_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "VDD_33ON_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "EXT_33_OFF";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "EXT_28_OFF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "PVDD_LDO25";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- op_mode = <1>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "EXT_18_OFF";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- op_mode = <1>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_MEM_1.35V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1355000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "PVDD_BUCK7";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "PVDD_BUCK8";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_33_OFF_EXT1";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
- };
- };
- };
-
- i2c at 12C80000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-
- hdmiddc at 50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c at 12C90000 {
- status = "okay";
-
- wm1811a at 1a {
-
- compatible = "wlf,wm1811";
- reg = <0x1a>;
-
- AVDD2-supply = <&main_dc_reg>;
- CPVDD-supply = <&main_dc_reg>;
- DBVDD1-supply = <&main_dc_reg>;
- DBVDD2-supply = <&main_dc_reg>;
- DBVDD3-supply = <&main_dc_reg>;
- LDO1VDD-supply = <&main_dc_reg>;
- SPKVDD1-supply = <&main_dc_reg>;
- SPKVDD2-supply = <&main_dc_reg>;
-
- wlf,ldo1ena = <&gpb0 0 0>;
- wlf,ldo2ena = <&gpb0 1 0>;
- };
- };
-
- i2c at 12CE0000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x38>;
-
- hdmiphy at 38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- i2c at 121D0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c:sata-phy at 38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
- };
-
- sata at 122F0000 {
- status = "okay";
- };
-
- sata-phy at 12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
-
- mmc_0: mmc at 12200000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
- slot at 0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
-
- mmc_2: mmc at 12220000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot at 0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
-
- i2s0: i2s at 03830000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
menu {
label = "SW-TACT2";
- gpios = <&gpx1 4 1>;
+ gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
home {
label = "SW-TACT3";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
up {
label = "SW-TACT4";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "SW-TACT5";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "SW-TACT6";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
wakeup {
label = "SW-TACT7";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 2>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- vdd-supply = <&ldo8_reg>;
- };
-
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -510,7 +90,7 @@
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 1>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -528,35 +108,6 @@
};
};
- dp-controller at 145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
- };
-
- fimd: fimd at 14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing at 0 {
- /* 2560x1600 DP panel */
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
- };
- };
-
usb_hub_bus {
compatible = "simple-bus";
#address-cells = <1>;
@@ -566,12 +117,464 @@
usb_hub: usb_hub {
compatible = "smsc,usb3503a";
- reset-gpios = <&gpx3 5 1>;
- connect-gpios = <&gpd1 7 1>;
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+};
+
+&ehci {
+ usb-phy = <&usb2_phy>;
+};
+
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing at 0 {
+ /* 2560x1600 DP panel */
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
+ };
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 2>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ s5m8767_pmic at 66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "EXT_33_OFF";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "EXT_28_OFF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "EXT_18_OFF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_33_OFF_EXT1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
};
};
+};
+
+&i2c_2 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+
+ hdmiddc at 50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+
+ wm1811a at 1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+
+ AVDD2-supply = <&main_dc_reg>;
+ CPVDD-supply = <&main_dc_reg>;
+ DBVDD1-supply = <&main_dc_reg>;
+ DBVDD2-supply = <&main_dc_reg>;
+ DBVDD3-supply = <&main_dc_reg>;
+ LDO1VDD-supply = <&main_dc_reg>;
+ SPKVDD1-supply = <&main_dc_reg>;
+ SPKVDD2-supply = <&main_dc_reg>;
+
+ wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+ wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ hdmiphy at 38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata_phy_i2c:sata-phy at 38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
- usb at 12110000 {
- usb-phy = <&usb2_phy>;
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
Use the new style of referencing inherited nodes, use symbolic names,
tidy indentation and reorder includes.
Goal is the alignment of all exynos5250 based device trees for comparison.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6:
* Updated for mfc node label
v5: New
Aligns with SMDK.
arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
1 file changed, 466 insertions(+), 463 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d0de1f50d15b..aac41c394d43 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -7,12 +7,13 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
-#include "exynos5250.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -26,473 +27,52 @@
bootargs = "console=ttySAC2,115200";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- samsung,i2c-slave-addr = <0x66>;
- status = "okay";
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- vinb1-supply = <&main_dc_reg>;
- vinb2-supply = <&main_dc_reg>;
- vinb3-supply = <&main_dc_reg>;
- vinb4-supply = <&main_dc_reg>;
- vinb5-supply = <&main_dc_reg>;
- vinb6-supply = <&main_dc_reg>;
- vinb7-supply = <&main_dc_reg>;
- vinb8-supply = <&main_dc_reg>;
- vinb9-supply = <&main_dc_reg>;
-
- vinl1-supply = <&buck7_reg>;
- vinl2-supply = <&buck7_reg>;
- vinl3-supply = <&buck7_reg>;
- vinl4-supply = <&main_dc_reg>;
- vinl5-supply = <&main_dc_reg>;
- vinl6-supply = <&main_dc_reg>;
- vinl7-supply = <&main_dc_reg>;
- vinl8-supply = <&buck8_reg>;
- vinl9-supply = <&buck8_reg>;
-
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
- s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
- <&gpd1 1 0>,
- <&gpd1 2 0>;
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_28IO_DP_1.35V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD_COMMON1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD_IOPERI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD_MPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD_XPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD_COMMON2_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD_33ON_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD_COMMON3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_ABB2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_USB_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_COMMON4_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDDQ_MMC2_3_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "VDD_33ON_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "EXT_33_OFF";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "EXT_28_OFF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "PVDD_LDO25";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- op_mode = <1>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "EXT_18_OFF";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- op_mode = <1>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_MEM_1.35V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1355000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "PVDD_BUCK7";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "PVDD_BUCK8";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_33_OFF_EXT1";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
- };
- };
- };
-
- i2c@12C80000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
-
- wm1811a@1a {
-
- compatible = "wlf,wm1811";
- reg = <0x1a>;
-
- AVDD2-supply = <&main_dc_reg>;
- CPVDD-supply = <&main_dc_reg>;
- DBVDD1-supply = <&main_dc_reg>;
- DBVDD2-supply = <&main_dc_reg>;
- DBVDD3-supply = <&main_dc_reg>;
- LDO1VDD-supply = <&main_dc_reg>;
- SPKVDD1-supply = <&main_dc_reg>;
- SPKVDD2-supply = <&main_dc_reg>;
-
- wlf,ldo1ena = <&gpb0 0 0>;
- wlf,ldo2ena = <&gpb0 1 0>;
- };
- };
-
- i2c@12CE0000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x38>;
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- i2c@121D0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
- };
-
- sata@122F0000 {
- status = "okay";
- };
-
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
-
- mmc_0: mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
-
- mmc_2: mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
menu {
label = "SW-TACT2";
- gpios = <&gpx1 4 1>;
+ gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
home {
label = "SW-TACT3";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
up {
label = "SW-TACT4";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "SW-TACT5";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "SW-TACT6";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
wakeup {
label = "SW-TACT7";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 2>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- vdd-supply = <&ldo8_reg>;
- };
-
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -510,7 +90,7 @@
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 1>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -528,35 +108,6 @@
};
};
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
- };
-
- fimd: fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 2560x1600 DP panel */
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
- };
- };
-
usb_hub_bus {
compatible = "simple-bus";
#address-cells = <1>;
@@ -566,12 +117,464 @@
usb_hub: usb_hub {
compatible = "smsc,usb3503a";
- reset-gpios = <&gpx3 5 1>;
- connect-gpios = <&gpd1 7 1>;
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+};
+
+&ehci {
+ usb-phy = <&usb2_phy>;
+};
+
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 2560x1600 DP panel */
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
+ };
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 2>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "EXT_33_OFF";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "EXT_28_OFF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "EXT_18_OFF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_33_OFF_EXT1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
};
};
+};
+
+&i2c_2 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+
+ wm1811a@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+
+ AVDD2-supply = <&main_dc_reg>;
+ CPVDD-supply = <&main_dc_reg>;
+ DBVDD1-supply = <&main_dc_reg>;
+ DBVDD2-supply = <&main_dc_reg>;
+ DBVDD3-supply = <&main_dc_reg>;
+ LDO1VDD-supply = <&main_dc_reg>;
+ SPKVDD1-supply = <&main_dc_reg>;
+ SPKVDD2-supply = <&main_dc_reg>;
+
+ wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+ wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata_phy_i2c:sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
- usb@12110000 {
- usb-phy = <&usb2_phy>;
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* Re: [PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale
@ 2014-08-02 13:02 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:02 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, open list
On 02.08.2014 02:52, Andreas Färber wrote:
> Use the new style of referencing inherited nodes, use symbolic names,
> tidy indentation and reorder includes.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Updated for mfc node label
>
> v5: New
> Aligns with SMDK.
>
> arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
> 1 file changed, 466 insertions(+), 463 deletions(-)
>
Diff in resulting dtb:
> --- exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.102905920 +0200
> +++ ../dtbs.post/exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.104905920 +0200
> @@ -1977,7 +1977,7 @@
> clocks = <0x2 0x158 0x2 0x88 0x2 0x89 0x2 0x9f 0x2 0x400>;
> clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi";
> samsung,syscon-phandle = <0x7>;
> - hpd-gpio = <0xc 0x7 0x2>;
> + hpd-gpio = <0xc 0x7 0x1>;
> vdd_osc-supply = <0x31>;
> vdd_pll-supply = <0x32>;
> vdd-supply = <0x32>;
> @@ -2104,15 +2104,9 @@
> };
> };
>
> - usb_hub_bus {
> - compatible = "simple-bus";
> - #address-cells = <0x1>;
> - #size-cells = <0x0>;
> -
> - usb_hub {
> - compatible = "smsc,usb3503a";
> - reset-gpios = <0xc 0x5 0x1>;
> - connect-gpios = <0x10 0x7 0x1>;
> - };
> + usb-hub {
> + compatible = "smsc,usb3503a";
> + reset-gpios = <0xc 0x5 0x1>;
> + connect-gpios = <0x10 0x7 0x1>;
> };
> };
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale
@ 2014-08-02 13:02 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:02 UTC (permalink / raw)
To: linux-arm-kernel
On 02.08.2014 02:52, Andreas F?rber wrote:
> Use the new style of referencing inherited nodes, use symbolic names,
> tidy indentation and reorder includes.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Updated for mfc node label
>
> v5: New
> Aligns with SMDK.
>
> arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
> 1 file changed, 466 insertions(+), 463 deletions(-)
>
Diff in resulting dtb:
> --- exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.102905920 +0200
> +++ ../dtbs.post/exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.104905920 +0200
> @@ -1977,7 +1977,7 @@
> clocks = <0x2 0x158 0x2 0x88 0x2 0x89 0x2 0x9f 0x2 0x400>;
> clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi";
> samsung,syscon-phandle = <0x7>;
> - hpd-gpio = <0xc 0x7 0x2>;
> + hpd-gpio = <0xc 0x7 0x1>;
> vdd_osc-supply = <0x31>;
> vdd_pll-supply = <0x32>;
> vdd-supply = <0x32>;
> @@ -2104,15 +2104,9 @@
> };
> };
>
> - usb_hub_bus {
> - compatible = "simple-bus";
> - #address-cells = <0x1>;
> - #size-cells = <0x0>;
> -
> - usb_hub {
> - compatible = "smsc,usb3503a";
> - reset-gpios = <0xc 0x5 0x1>;
> - connect-gpios = <0x10 0x7 0x1>;
> - };
> + usb-hub {
> + compatible = "smsc,usb3503a";
> + reset-gpios = <0xc 0x5 0x1>;
> + connect-gpios = <0x10 0x7 0x1>;
> };
> };
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale
@ 2014-08-02 13:02 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:02 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, open list
On 02.08.2014 02:52, Andreas Färber wrote:
> Use the new style of referencing inherited nodes, use symbolic names,
> tidy indentation and reorder includes.
>
> Goal is the alignment of all exynos5250 based device trees for comparison.
>
> Signed-off-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
> ---
> v5 -> v6:
> * Updated for mfc node label
>
> v5: New
> Aligns with SMDK.
>
> arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
> 1 file changed, 466 insertions(+), 463 deletions(-)
>
Diff in resulting dtb:
> --- exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.102905920 +0200
> +++ ../dtbs.post/exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.104905920 +0200
> @@ -1977,7 +1977,7 @@
> clocks = <0x2 0x158 0x2 0x88 0x2 0x89 0x2 0x9f 0x2 0x400>;
> clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi";
> samsung,syscon-phandle = <0x7>;
> - hpd-gpio = <0xc 0x7 0x2>;
> + hpd-gpio = <0xc 0x7 0x1>;
> vdd_osc-supply = <0x31>;
> vdd_pll-supply = <0x32>;
> vdd-supply = <0x32>;
> @@ -2104,15 +2104,9 @@
> };
> };
>
> - usb_hub_bus {
> - compatible = "simple-bus";
> - #address-cells = <0x1>;
> - #size-cells = <0x0>;
> -
> - usb_hub {
> - compatible = "smsc,usb3503a";
> - reset-gpios = <0xc 0x5 0x1>;
> - connect-gpios = <0x10 0x7 0x1>;
> - };
> + usb-hub {
> + compatible = "smsc,usb3503a";
> + reset-gpios = <0xc 0x5 0x1>;
> + connect-gpios = <0x10 0x7 0x1>;
> };
> };
Reviewed-by: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale
2014-08-02 13:02 ` Tomasz Figa
@ 2014-08-02 13:10 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 13:10 UTC (permalink / raw)
To: Tomasz Figa, linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Ben Dooks, Kukjin Kim, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, open list
Am 02.08.2014 15:02, schrieb Tomasz Figa:
> On 02.08.2014 02:52, Andreas Färber wrote:
>> Use the new style of referencing inherited nodes, use symbolic names,
>> tidy indentation and reorder includes.
>>
>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> v5 -> v6:
>> * Updated for mfc node label
>>
>> v5: New
>> Aligns with SMDK.
>>
>> arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
>> 1 file changed, 466 insertions(+), 463 deletions(-)
>>
>
> Diff in resulting dtb:
Same here, appears to be over whole series:
>> --- exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.102905920 +0200
>> +++ ../dtbs.post/exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.104905920 +0200
>> @@ -1977,7 +1977,7 @@
>> clocks = <0x2 0x158 0x2 0x88 0x2 0x89 0x2 0x9f 0x2 0x400>;
>> clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi";
>> samsung,syscon-phandle = <0x7>;
>> - hpd-gpio = <0xc 0x7 0x2>;
>> + hpd-gpio = <0xc 0x7 0x1>;
>> vdd_osc-supply = <0x31>;
>> vdd_pll-supply = <0x32>;
>> vdd-supply = <0x32>;
Optional follow-up patch 08/10.
>> @@ -2104,15 +2104,9 @@
>> };
>> };
>>
>> - usb_hub_bus {
>> - compatible = "simple-bus";
>> - #address-cells = <0x1>;
>> - #size-cells = <0x0>;
>> -
>> - usb_hub {
>> - compatible = "smsc,usb3503a";
>> - reset-gpios = <0xc 0x5 0x1>;
>> - connect-gpios = <0x10 0x7 0x1>;
>> - };
>> + usb-hub {
>> + compatible = "smsc,usb3503a";
>> + reset-gpios = <0xc 0x5 0x1>;
>> + connect-gpios = <0x10 0x7 0x1>;
>> };
>> };
Optional follow-up patch 09/10.
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Thanks,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale
@ 2014-08-02 13:10 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Am 02.08.2014 15:02, schrieb Tomasz Figa:
> On 02.08.2014 02:52, Andreas F?rber wrote:
>> Use the new style of referencing inherited nodes, use symbolic names,
>> tidy indentation and reorder includes.
>>
>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>
>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>> ---
>> v5 -> v6:
>> * Updated for mfc node label
>>
>> v5: New
>> Aligns with SMDK.
>>
>> arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
>> 1 file changed, 466 insertions(+), 463 deletions(-)
>>
>
> Diff in resulting dtb:
Same here, appears to be over whole series:
>> --- exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.102905920 +0200
>> +++ ../dtbs.post/exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.104905920 +0200
>> @@ -1977,7 +1977,7 @@
>> clocks = <0x2 0x158 0x2 0x88 0x2 0x89 0x2 0x9f 0x2 0x400>;
>> clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi";
>> samsung,syscon-phandle = <0x7>;
>> - hpd-gpio = <0xc 0x7 0x2>;
>> + hpd-gpio = <0xc 0x7 0x1>;
>> vdd_osc-supply = <0x31>;
>> vdd_pll-supply = <0x32>;
>> vdd-supply = <0x32>;
Optional follow-up patch 08/10.
>> @@ -2104,15 +2104,9 @@
>> };
>> };
>>
>> - usb_hub_bus {
>> - compatible = "simple-bus";
>> - #address-cells = <0x1>;
>> - #size-cells = <0x0>;
>> -
>> - usb_hub {
>> - compatible = "smsc,usb3503a";
>> - reset-gpios = <0xc 0x5 0x1>;
>> - connect-gpios = <0x10 0x7 0x1>;
>> - };
>> + usb-hub {
>> + compatible = "smsc,usb3503a";
>> + reset-gpios = <0xc 0x5 0x1>;
>> + connect-gpios = <0x10 0x7 0x1>;
>> };
>> };
Optional follow-up patch 09/10.
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Thanks,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 08/10] ARM: dts: Fix apparent GPIO typo in exynos5250-arndale
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
The GPIO flag 2 has no constant assigned, so this was probably active-low.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Spotted during cleanup.
arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index aac41c394d43..cc8b9ffeecc1 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -159,7 +159,7 @@
};
&hdmi {
- hpd-gpio = <&gpx3 7 2>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
vdd-supply = <&ldo8_reg>;
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 08/10] ARM: dts: Fix apparent GPIO typo in exynos5250-arndale
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
The GPIO flag 2 has no constant assigned, so this was probably active-low.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Spotted during cleanup.
arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index aac41c394d43..cc8b9ffeecc1 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -159,7 +159,7 @@
};
&hdmi {
- hpd-gpio = <&gpx3 7 2>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
vdd-supply = <&ldo8_reg>;
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 08/10] ARM: dts: Fix apparent GPIO typo in exynos5250-arndale
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
The GPIO flag 2 has no constant assigned, so this was probably active-low.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Spotted during cleanup.
arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index aac41c394d43..cc8b9ffeecc1 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -159,7 +159,7 @@
};
&hdmi {
- hpd-gpio = <&gpx3 7 2>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
vdd-supply = <&ldo8_reg>;
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread
* [PATCH v6 09/10] ARM: dts: Simplify USB3503 on exynos5250-arndale
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
There's no need for a simple-bus, place the smsc,usb3503a directly into
the root node. That's what we're going to do on exynos5250-spring.
Reported-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Aligns with Spring's new USB3503 node.
arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index cc8b9ffeecc1..b231bcff7403 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -108,18 +108,12 @@
};
};
- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
-
- reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
- };
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
};
};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 09/10] ARM: dts: Simplify USB3503 on exynos5250-arndale
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
There's no need for a simple-bus, place the smsc,usb3503a directly into
the root node. That's what we're going to do on exynos5250-spring.
Reported-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Aligns with Spring's new USB3503 node.
arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index cc8b9ffeecc1..b231bcff7403 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -108,18 +108,12 @@
};
};
- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
-
- reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
- };
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
};
};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 09/10] ARM: dts: Simplify USB3503 on exynos5250-arndale
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Ben Dooks, Kukjin Kim,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, open list
There's no need for a simple-bus, place the smsc,usb3503a directly into
the root node. That's what we're going to do on exynos5250-spring.
Reported-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged
v5: New
Aligns with Spring's new USB3503 node.
arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index cc8b9ffeecc1..b231bcff7403 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -108,18 +108,12 @@
};
};
- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
-
- reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
- };
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
};
};
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread
* [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-02 0:52 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, Ben Dooks,
Kukjin Kim, open list
Adds initial support for the HP Chromebook 11.
Cc: Vincent Palatin <vpalatin@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Stephan van Schaik <stephan@synkhronix.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6:
* Updated for mfc node label
* Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson)
* Fixed alphabetical order of sd1_* nodes (Doug Anderson)
v4 -> v5:
* Dropped bogus USB3 regulator (Vincent Palatin, Tomasz Figa)
* Fixed USB3503 reset GPIO (Tomasz Figa)
* Introduced labels to use new referencing style consistently (Tomasz Figa)
* Don't override dp_hpd, moved to pinctrl_0 instead (Tomasz Figa)
* mmc_1: Added comment from Snow's mmc_3 (Tomasz Figa / Doug Anderson)
* Override /codec samsung,mfc-{l,r} properties for alignment with Arndale
* Use more GPIO_ACTIVE_* constants
* Use IRQ_TYPE_* constants
* Dropped s5m_ prefix for s5m8767 LDO regulator labels (max77686 is gone)
* Labeled also all s5m8767 BUCK regulators
v3 -> v4:
* Fixed samsung,pin-function 1 -> 0 for dp-hpd-gpio
* Replaced dp-hpd-gpio with existing dp_hpd, overriding it
v2 -> v3:
* Use GPIO_ACTIVE_{LOW,HIGH} (Doug Anderson)
* Use symbolic KEY_POWER instead of comment
* Moved hsic_reset to new USB3503 node's reset-gpios (Vincent Palatin)
* Use dp_hpd_gpio for dp-controller (Doug Anderson, Ajay Kumar)
* Override sd1_{clk,cmd,cd,bus4} pinctrl similar to Snow (Doug Anderson)
* Added ec_irq pinctrl for cros_ec (Doug Anderson)
* Reordered nodes to minimize diff against Snow (Doug Anderson)
* Dropped obsolete mmc_2 override (Doug Anderson)
* Added lid-switch node (Doug Anderson)
* Added gpio-keys pinctrl (Doug Anderson)
* Added bootargs to avoid empty /chosen node and to document console setting
* Renamed s5m8767_pmic node to avoid underscore
* Use new style for overriding inherited pinctrl nodes, too
* Enable i2s0 node
v1 -> v2:
* Use label-based overriding/extension of nodes. (Doug Anderson)
* Dropped tps65090 for now, until we know where to place it.
* Dropped non-Spring nodes from -cros-common.dtsi rather than disabling them.
* Enabled a missing MMC node for access to internal storage.
* Dropped display-timings from dp-controller node. (Ajay Kumar)
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++
2 files changed, 537 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 80a781f76e88..dec4c292f63d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
new file mode 100644
index 000000000000..f5566f84d885
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -0,0 +1,536 @@
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ model = "Google Spring";
+ compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ usb-hub {
+ compatible = "smsc,usb3503a";
+ reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <1>;
+ samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ s5m8767-pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+ /*
+ * The following arrays of DVS voltages are not used, since we are
+ * not using GPIOs to control PMIC bucks, but they must be defined
+ * to please the driver.
+ */
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+
+ regulators {
+ ldo4_reg: LDO4 {
+ regulator-name = "P1.0V_LDO_OUT4";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.0V_LDO_OUT5";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_mydp";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "P2.8V_LDO_OUT17";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_bridge";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.2V_BUCK_OUT6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <0>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_ummc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&pinctrl_0 {
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp-hpd-gpio {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ hsic_reset: hsic-reset {
+ samsung,pins = "gpe1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&sd1_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cd {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-arm-kernel
Adds initial support for the HP Chromebook 11.
Cc: Vincent Palatin <vpalatin@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Stephan van Schaik <stephan@synkhronix.com>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
v5 -> v6:
* Updated for mfc node label
* Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson)
* Fixed alphabetical order of sd1_* nodes (Doug Anderson)
v4 -> v5:
* Dropped bogus USB3 regulator (Vincent Palatin, Tomasz Figa)
* Fixed USB3503 reset GPIO (Tomasz Figa)
* Introduced labels to use new referencing style consistently (Tomasz Figa)
* Don't override dp_hpd, moved to pinctrl_0 instead (Tomasz Figa)
* mmc_1: Added comment from Snow's mmc_3 (Tomasz Figa / Doug Anderson)
* Override /codec samsung,mfc-{l,r} properties for alignment with Arndale
* Use more GPIO_ACTIVE_* constants
* Use IRQ_TYPE_* constants
* Dropped s5m_ prefix for s5m8767 LDO regulator labels (max77686 is gone)
* Labeled also all s5m8767 BUCK regulators
v3 -> v4:
* Fixed samsung,pin-function 1 -> 0 for dp-hpd-gpio
* Replaced dp-hpd-gpio with existing dp_hpd, overriding it
v2 -> v3:
* Use GPIO_ACTIVE_{LOW,HIGH} (Doug Anderson)
* Use symbolic KEY_POWER instead of comment
* Moved hsic_reset to new USB3503 node's reset-gpios (Vincent Palatin)
* Use dp_hpd_gpio for dp-controller (Doug Anderson, Ajay Kumar)
* Override sd1_{clk,cmd,cd,bus4} pinctrl similar to Snow (Doug Anderson)
* Added ec_irq pinctrl for cros_ec (Doug Anderson)
* Reordered nodes to minimize diff against Snow (Doug Anderson)
* Dropped obsolete mmc_2 override (Doug Anderson)
* Added lid-switch node (Doug Anderson)
* Added gpio-keys pinctrl (Doug Anderson)
* Added bootargs to avoid empty /chosen node and to document console setting
* Renamed s5m8767_pmic node to avoid underscore
* Use new style for overriding inherited pinctrl nodes, too
* Enable i2s0 node
v1 -> v2:
* Use label-based overriding/extension of nodes. (Doug Anderson)
* Dropped tps65090 for now, until we know where to place it.
* Dropped non-Spring nodes from -cros-common.dtsi rather than disabling them.
* Enabled a missing MMC node for access to internal storage.
* Dropped display-timings from dp-controller node. (Ajay Kumar)
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++
2 files changed, 537 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 80a781f76e88..dec4c292f63d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
new file mode 100644
index 000000000000..f5566f84d885
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -0,0 +1,536 @@
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ model = "Google Spring";
+ compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ usb-hub {
+ compatible = "smsc,usb3503a";
+ reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <1>;
+ samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ s5m8767-pmic at 66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+ /*
+ * The following arrays of DVS voltages are not used, since we are
+ * not using GPIOs to control PMIC bucks, but they must be defined
+ * to please the driver.
+ */
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+
+ regulators {
+ ldo4_reg: LDO4 {
+ regulator-name = "P1.0V_LDO_OUT4";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.0V_LDO_OUT5";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_mydp";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "P2.8V_LDO_OUT17";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_bridge";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.2V_BUCK_OUT6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <0>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_ummc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc at 50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy at 38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&pinctrl_0 {
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp-hpd-gpio {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ hsic_reset: hsic-reset {
+ samsung,pins = "gpe1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&sd1_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cd {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-02 0:52 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 0:52 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Andreas Färber, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King, Ben Dooks,
Kukjin Kim, open list
Adds initial support for the HP Chromebook 11.
Cc: Vincent Palatin <vpalatin@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Stephan van Schaik <stephan@synkhronix.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6:
* Updated for mfc node label
* Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson)
* Fixed alphabetical order of sd1_* nodes (Doug Anderson)
v4 -> v5:
* Dropped bogus USB3 regulator (Vincent Palatin, Tomasz Figa)
* Fixed USB3503 reset GPIO (Tomasz Figa)
* Introduced labels to use new referencing style consistently (Tomasz Figa)
* Don't override dp_hpd, moved to pinctrl_0 instead (Tomasz Figa)
* mmc_1: Added comment from Snow's mmc_3 (Tomasz Figa / Doug Anderson)
* Override /codec samsung,mfc-{l,r} properties for alignment with Arndale
* Use more GPIO_ACTIVE_* constants
* Use IRQ_TYPE_* constants
* Dropped s5m_ prefix for s5m8767 LDO regulator labels (max77686 is gone)
* Labeled also all s5m8767 BUCK regulators
v3 -> v4:
* Fixed samsung,pin-function 1 -> 0 for dp-hpd-gpio
* Replaced dp-hpd-gpio with existing dp_hpd, overriding it
v2 -> v3:
* Use GPIO_ACTIVE_{LOW,HIGH} (Doug Anderson)
* Use symbolic KEY_POWER instead of comment
* Moved hsic_reset to new USB3503 node's reset-gpios (Vincent Palatin)
* Use dp_hpd_gpio for dp-controller (Doug Anderson, Ajay Kumar)
* Override sd1_{clk,cmd,cd,bus4} pinctrl similar to Snow (Doug Anderson)
* Added ec_irq pinctrl for cros_ec (Doug Anderson)
* Reordered nodes to minimize diff against Snow (Doug Anderson)
* Dropped obsolete mmc_2 override (Doug Anderson)
* Added lid-switch node (Doug Anderson)
* Added gpio-keys pinctrl (Doug Anderson)
* Added bootargs to avoid empty /chosen node and to document console setting
* Renamed s5m8767_pmic node to avoid underscore
* Use new style for overriding inherited pinctrl nodes, too
* Enable i2s0 node
v1 -> v2:
* Use label-based overriding/extension of nodes. (Doug Anderson)
* Dropped tps65090 for now, until we know where to place it.
* Dropped non-Spring nodes from -cros-common.dtsi rather than disabling them.
* Enabled a missing MMC node for access to internal storage.
* Dropped display-timings from dp-controller node. (Ajay Kumar)
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++
2 files changed, 537 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 80a781f76e88..dec4c292f63d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
new file mode 100644
index 000000000000..f5566f84d885
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -0,0 +1,536 @@
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ model = "Google Spring";
+ compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ usb-hub {
+ compatible = "smsc,usb3503a";
+ reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <1>;
+ samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ s5m8767-pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+ /*
+ * The following arrays of DVS voltages are not used, since we are
+ * not using GPIOs to control PMIC bucks, but they must be defined
+ * to please the driver.
+ */
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+
+ regulators {
+ ldo4_reg: LDO4 {
+ regulator-name = "P1.0V_LDO_OUT4";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.0V_LDO_OUT5";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_mydp";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "P2.8V_LDO_OUT17";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_bridge";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.2V_BUCK_OUT6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <0>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_ummc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&pinctrl_0 {
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp-hpd-gpio {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ hsic_reset: hsic-reset {
+ samsung,pins = "gpe1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&sd1_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cd {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"
--
1.9.3
^ permalink raw reply related [flat|nested] 98+ messages in thread* Re: [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
2014-08-02 0:52 ` Andreas Färber
@ 2014-08-02 13:18 ` Tomasz Figa
-1 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:18 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Javier Martinez Canillas,
Tomasz Figa, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Russell King, Ben Dooks, Kukjin Kim, open list
On 02.08.2014 02:52, Andreas Färber wrote:
> Adds initial support for the HP Chromebook 11.
>
> Cc: Vincent Palatin <vpalatin@chromium.org>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Stephan van Schaik <stephan@synkhronix.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Updated for mfc node label
> * Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson)
> * Fixed alphabetical order of sd1_* nodes (Doug Anderson)
>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-02 13:18 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:18 UTC (permalink / raw)
To: linux-arm-kernel
On 02.08.2014 02:52, Andreas F?rber wrote:
> Adds initial support for the HP Chromebook 11.
>
> Cc: Vincent Palatin <vpalatin@chromium.org>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Stephan van Schaik <stephan@synkhronix.com>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Updated for mfc node label
> * Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson)
> * Fixed alphabetical order of sd1_* nodes (Doug Anderson)
>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
2014-08-02 0:52 ` Andreas Färber
(?)
@ 2014-08-04 15:22 ` Doug Anderson
-1 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-04 15:22 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Russell King, Ben Dooks, Kukjin Kim, open list,
Julius Werner
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@suse.de> wrote:
> Adds initial support for the HP Chromebook 11.
>
> Cc: Vincent Palatin <vpalatin@chromium.org>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Stephan van Schaik <stephan@synkhronix.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Updated for mfc node label
> * Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson)
> * Fixed alphabetical order of sd1_* nodes (Doug Anderson)
>
> v4 -> v5:
> * Dropped bogus USB3 regulator (Vincent Palatin, Tomasz Figa)
> * Fixed USB3503 reset GPIO (Tomasz Figa)
> * Introduced labels to use new referencing style consistently (Tomasz Figa)
> * Don't override dp_hpd, moved to pinctrl_0 instead (Tomasz Figa)
> * mmc_1: Added comment from Snow's mmc_3 (Tomasz Figa / Doug Anderson)
> * Override /codec samsung,mfc-{l,r} properties for alignment with Arndale
> * Use more GPIO_ACTIVE_* constants
> * Use IRQ_TYPE_* constants
> * Dropped s5m_ prefix for s5m8767 LDO regulator labels (max77686 is gone)
> * Labeled also all s5m8767 BUCK regulators
>
> v3 -> v4:
> * Fixed samsung,pin-function 1 -> 0 for dp-hpd-gpio
> * Replaced dp-hpd-gpio with existing dp_hpd, overriding it
>
> v2 -> v3:
> * Use GPIO_ACTIVE_{LOW,HIGH} (Doug Anderson)
> * Use symbolic KEY_POWER instead of comment
> * Moved hsic_reset to new USB3503 node's reset-gpios (Vincent Palatin)
> * Use dp_hpd_gpio for dp-controller (Doug Anderson, Ajay Kumar)
> * Override sd1_{clk,cmd,cd,bus4} pinctrl similar to Snow (Doug Anderson)
> * Added ec_irq pinctrl for cros_ec (Doug Anderson)
> * Reordered nodes to minimize diff against Snow (Doug Anderson)
> * Dropped obsolete mmc_2 override (Doug Anderson)
> * Added lid-switch node (Doug Anderson)
> * Added gpio-keys pinctrl (Doug Anderson)
> * Added bootargs to avoid empty /chosen node and to document console setting
> * Renamed s5m8767_pmic node to avoid underscore
> * Use new style for overriding inherited pinctrl nodes, too
> * Enable i2s0 node
>
> v1 -> v2:
> * Use label-based overriding/extension of nodes. (Doug Anderson)
> * Dropped tps65090 for now, until we know where to place it.
> * Dropped non-Spring nodes from -cros-common.dtsi rather than disabling them.
> * Enabled a missing MMC node for access to internal storage.
> * Dropped display-timings from dp-controller node. (Ajay Kumar)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++
> 2 files changed, 537 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 80a781f76e88..dec4c292f63d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> exynos5250-arndale.dtb \
> exynos5250-smdk5250.dtb \
> exynos5250-snow.dtb \
> + exynos5250-spring.dtb \
> exynos5260-xyref5260.dtb \
> exynos5410-smdk5410.dtb \
> exynos5420-arndale-octa.dtb \
> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
> new file mode 100644
> index 000000000000..f5566f84d885
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
> @@ -0,0 +1,536 @@
> +/*
> + * Google Spring board device tree source
> + *
> + * Copyright (c) 2013 Google, Inc
> + * Copyright (c) 2014 SUSE LINUX Products GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
> +#include "exynos5250.dtsi"
> +
> +/ {
> + model = "Google Spring";
> + compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
> +
> + memory {
> + reg = <0x40000000 0x80000000>;
> + };
> +
> + chosen {
> + bootargs = "console=tty1";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&power_key_irq>, <&lid_irq>;
> +
> + power {
> + label = "Power";
> + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + gpio-key,wakeup;
> + };
> +
> + lid-switch {
> + label = "Lid";
> + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
> + linux,input-type = <5>; /* EV_SW */
> + linux,code = <0>; /* SW_LID */
> + debounce-interval = <1>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + usb-hub {
> + compatible = "smsc,usb3503a";
> + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
> + };
Last I remember hearing about this, Julius said that the generic
usb-hub driver didn't work right for asserting the reset line.
Something about needing the reset at a very specific time in the USB
enumeration, I think. Maybe it's somehow been fixed since then and
that's why it's working?
Also: you technically should have a pinctrl-0 and pinctrl-names
referencing "hsic_reset" below to make sure the pin gets initted
properly.
> +
> + fixed-rate-clocks {
> + xxti {
> + compatible = "samsung,clock-xxti";
> + clock-frequency = <24000000>;
> + };
> + };
> +};
> +
> +&dp {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd_gpio>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x0a>;
> + samsung,lane-count = <1>;
> + samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&ehci {
> + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&fimd {
> + status = "okay";
> + samsung,invert-vclk;
> +};
> +
> +&hdmi {
> + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_hpd_irq>;
> + phy = <&hdmiphy>;
> + ddc = <&i2c_2>;
> + hdmi-en-supply = <&ldo8_reg>;
> + vdd-supply = <&ldo8_reg>;
> + vdd_osc-supply = <&ldo10_reg>;
> + vdd_pll-supply = <&ldo8_reg>;
> +};
> +
> +&i2c_0 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + s5m8767-pmic@66 {
> + compatible = "samsung,s5m8767-pmic";
> + reg = <0x66>;
> + interrupt-parent = <&gpx3>;
> + interrupts = <2 IRQ_TYPE_NONE>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
> + wakeup-source;
> +
> + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
> + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
> + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
> +
> + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
> + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
> + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
> +
> + /*
> + * The following arrays of DVS voltages are not used, since we are
> + * not using GPIOs to control PMIC bucks, but they must be defined
> + * to please the driver.
> + */
> + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
> + <1250000>, <1200000>,
> + <1150000>, <1100000>,
> + <1000000>, <950000>;
> +
> + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
> + <1100000>, <1100000>,
> + <1000000>, <1000000>,
> + <1000000>, <1000000>;
> +
> + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>;
> +
> + clocks {
> + compatible = "samsung,s5m8767-clk";
> + #clock-cells = <1>;
> + clock-output-names = "en32khz_ap",
> + "en32khz_cp",
> + "en32khz_bt";
On someone's todo list ought to be whether we need to enable
low-jitter mode like we did on Spring. Originally we enabled it on
snow because the TPM was unhappy without low-jitter but there was an
assumption that WiFi might be affected too. The low jitter mode
doesn't take much power, so we enabled it.
> + };
> +
> + regulators {
> + ldo4_reg: LDO4 {
> + regulator-name = "P1.0V_LDO_OUT4";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "P1.0V_LDO_OUT5";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "vdd_mydp";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "P1.1V_LDO_OUT7";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "P1.0V_LDO_OUT8";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "P1.8V_LDO_OUT10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "P1.8V_LDO_OUT11";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "P3.0V_LDO_OUT12";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "P1.8V_LDO_OUT13";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "P1.8V_LDO_OUT14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "P1.0V_LDO_OUT15";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "P1.8V_LDO_OUT16";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "P2.8V_LDO_OUT17";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "vdd_bridge";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "P1.8V_BUCK_OUT5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <1>;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "P1.2V_BUCK_OUT6";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <0>;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "vdd_ummc";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> + };
> + };
> +};
> +
> +&i2c_1 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +};
> +
> +/*
> + * Disabled pullups since external part has its own pullups and
> + * double-pulling gets us out of spec in some cases.
> + */
> +&i2c2_bus {
> + samsung,pin-pud = <0>;
> +};
> +
> +&i2c_2 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +
> + hdmiddc@50 {
> + compatible = "samsung,exynos4210-hdmiddc";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c_3 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_4 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +
> + cros_ec: embedded-controller {
> + compatible = "google,cros-ec-i2c";
> + reg = <0x1e>;
> + interrupts = <6 IRQ_TYPE_NONE>;
> + interrupt-parent = <&gpx1>;
> + wakeup-source;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ec_irq>;
> + };
> +};
> +
> +&i2c_5 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_7 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_8 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + hdmiphy: hdmiphy@38 {
> + compatible = "samsung,exynos4212-hdmiphy";
> + reg = <0x38>;
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mfc {
> + samsung,mfc-r = <0x43000000 0x800000>;
> + samsung,mfc-l = <0x51000000 0x800000>;
Interesting that the copy of Snow that I see in linuxnext doesn't have
these, but from what I can tell they look OK. Maybe we should add
them for snow, too?
> +};
> +
> +&mmc_0 {
> + status = "okay";
> + num-slots = <1>;
> + supports-highspeed;
> + broken-cd;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <8>;
> + };
> +};
> +
> +/*
> + * On Spring we've got SIP WiFi and so can keep drive strengths low to
> + * reduce EMI.
> + */
On both Spring and Snow this comment would be better where we redefine
sd1_clk, ... in the "pinctrl" section (I know that you're just copying
what's in the ChromeOS tree, but...)
> +&mmc_1 {
> + status = "okay";
> + num-slots = <1>;
> + supports-highspeed;
> + broken-cd;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <4>;
> + };
> +};
> +
> +&pinctrl_0 {
> + s5m8767_dvs: s5m8767-dvs {
> + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + dp_hpd_gpio: dp-hpd-gpio {
> + samsung,pins = "gpc3-0";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + power_key_irq: power-key-irq {
> + samsung,pins = "gpx1-3";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
The fact that snow is missing the pinctrl lines for power and lid is a
bug on snow. Perhaps Javier would be interested in submitting a patch
to fix that?
> +
> + ec_irq: ec-irq {
> + samsung,pins = "gpx1-6";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + s5m8767_ds: s5m8767-ds {
> + samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + s5m8767_irq: s5m8767-irq {
> + samsung,pins = "gpx3-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + lid_irq: lid-irq {
> + samsung,pins = "gpx3-5";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hdmi_hpd_irq: hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_1 {
> + hsic_reset: hsic-reset {
> + samsung,pins = "gpe1-0";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&sd1_bus4 {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_cd {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_clk {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_cmd {
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> +};
> +
> +&spi_1 {
> + status = "okay";
> + samsung,spi-src-clk = <0>;
> + num-cs = <1>;
> +};
> +
> +#include "cros-ec-keyboard.dtsi"
Technically the missing pinctrl for hsic-reset is something that out
to be fixed and we should figure out whether the reset line is
actually working properly anyway. ...but I think this has been
through enough spins and any additional fixup can happen later, so you
can add my:
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-04 15:22 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-04 15:22 UTC (permalink / raw)
To: linux-arm-kernel
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas F?rber <afaerber@suse.de> wrote:
> Adds initial support for the HP Chromebook 11.
>
> Cc: Vincent Palatin <vpalatin@chromium.org>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Stephan van Schaik <stephan@synkhronix.com>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Updated for mfc node label
> * Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson)
> * Fixed alphabetical order of sd1_* nodes (Doug Anderson)
>
> v4 -> v5:
> * Dropped bogus USB3 regulator (Vincent Palatin, Tomasz Figa)
> * Fixed USB3503 reset GPIO (Tomasz Figa)
> * Introduced labels to use new referencing style consistently (Tomasz Figa)
> * Don't override dp_hpd, moved to pinctrl_0 instead (Tomasz Figa)
> * mmc_1: Added comment from Snow's mmc_3 (Tomasz Figa / Doug Anderson)
> * Override /codec samsung,mfc-{l,r} properties for alignment with Arndale
> * Use more GPIO_ACTIVE_* constants
> * Use IRQ_TYPE_* constants
> * Dropped s5m_ prefix for s5m8767 LDO regulator labels (max77686 is gone)
> * Labeled also all s5m8767 BUCK regulators
>
> v3 -> v4:
> * Fixed samsung,pin-function 1 -> 0 for dp-hpd-gpio
> * Replaced dp-hpd-gpio with existing dp_hpd, overriding it
>
> v2 -> v3:
> * Use GPIO_ACTIVE_{LOW,HIGH} (Doug Anderson)
> * Use symbolic KEY_POWER instead of comment
> * Moved hsic_reset to new USB3503 node's reset-gpios (Vincent Palatin)
> * Use dp_hpd_gpio for dp-controller (Doug Anderson, Ajay Kumar)
> * Override sd1_{clk,cmd,cd,bus4} pinctrl similar to Snow (Doug Anderson)
> * Added ec_irq pinctrl for cros_ec (Doug Anderson)
> * Reordered nodes to minimize diff against Snow (Doug Anderson)
> * Dropped obsolete mmc_2 override (Doug Anderson)
> * Added lid-switch node (Doug Anderson)
> * Added gpio-keys pinctrl (Doug Anderson)
> * Added bootargs to avoid empty /chosen node and to document console setting
> * Renamed s5m8767_pmic node to avoid underscore
> * Use new style for overriding inherited pinctrl nodes, too
> * Enable i2s0 node
>
> v1 -> v2:
> * Use label-based overriding/extension of nodes. (Doug Anderson)
> * Dropped tps65090 for now, until we know where to place it.
> * Dropped non-Spring nodes from -cros-common.dtsi rather than disabling them.
> * Enabled a missing MMC node for access to internal storage.
> * Dropped display-timings from dp-controller node. (Ajay Kumar)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++
> 2 files changed, 537 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 80a781f76e88..dec4c292f63d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> exynos5250-arndale.dtb \
> exynos5250-smdk5250.dtb \
> exynos5250-snow.dtb \
> + exynos5250-spring.dtb \
> exynos5260-xyref5260.dtb \
> exynos5410-smdk5410.dtb \
> exynos5420-arndale-octa.dtb \
> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
> new file mode 100644
> index 000000000000..f5566f84d885
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
> @@ -0,0 +1,536 @@
> +/*
> + * Google Spring board device tree source
> + *
> + * Copyright (c) 2013 Google, Inc
> + * Copyright (c) 2014 SUSE LINUX Products GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
> +#include "exynos5250.dtsi"
> +
> +/ {
> + model = "Google Spring";
> + compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
> +
> + memory {
> + reg = <0x40000000 0x80000000>;
> + };
> +
> + chosen {
> + bootargs = "console=tty1";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&power_key_irq>, <&lid_irq>;
> +
> + power {
> + label = "Power";
> + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + gpio-key,wakeup;
> + };
> +
> + lid-switch {
> + label = "Lid";
> + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
> + linux,input-type = <5>; /* EV_SW */
> + linux,code = <0>; /* SW_LID */
> + debounce-interval = <1>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + usb-hub {
> + compatible = "smsc,usb3503a";
> + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
> + };
Last I remember hearing about this, Julius said that the generic
usb-hub driver didn't work right for asserting the reset line.
Something about needing the reset at a very specific time in the USB
enumeration, I think. Maybe it's somehow been fixed since then and
that's why it's working?
Also: you technically should have a pinctrl-0 and pinctrl-names
referencing "hsic_reset" below to make sure the pin gets initted
properly.
> +
> + fixed-rate-clocks {
> + xxti {
> + compatible = "samsung,clock-xxti";
> + clock-frequency = <24000000>;
> + };
> + };
> +};
> +
> +&dp {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd_gpio>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x0a>;
> + samsung,lane-count = <1>;
> + samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&ehci {
> + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&fimd {
> + status = "okay";
> + samsung,invert-vclk;
> +};
> +
> +&hdmi {
> + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_hpd_irq>;
> + phy = <&hdmiphy>;
> + ddc = <&i2c_2>;
> + hdmi-en-supply = <&ldo8_reg>;
> + vdd-supply = <&ldo8_reg>;
> + vdd_osc-supply = <&ldo10_reg>;
> + vdd_pll-supply = <&ldo8_reg>;
> +};
> +
> +&i2c_0 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + s5m8767-pmic at 66 {
> + compatible = "samsung,s5m8767-pmic";
> + reg = <0x66>;
> + interrupt-parent = <&gpx3>;
> + interrupts = <2 IRQ_TYPE_NONE>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
> + wakeup-source;
> +
> + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
> + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
> + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
> +
> + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
> + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
> + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
> +
> + /*
> + * The following arrays of DVS voltages are not used, since we are
> + * not using GPIOs to control PMIC bucks, but they must be defined
> + * to please the driver.
> + */
> + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
> + <1250000>, <1200000>,
> + <1150000>, <1100000>,
> + <1000000>, <950000>;
> +
> + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
> + <1100000>, <1100000>,
> + <1000000>, <1000000>,
> + <1000000>, <1000000>;
> +
> + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>;
> +
> + clocks {
> + compatible = "samsung,s5m8767-clk";
> + #clock-cells = <1>;
> + clock-output-names = "en32khz_ap",
> + "en32khz_cp",
> + "en32khz_bt";
On someone's todo list ought to be whether we need to enable
low-jitter mode like we did on Spring. Originally we enabled it on
snow because the TPM was unhappy without low-jitter but there was an
assumption that WiFi might be affected too. The low jitter mode
doesn't take much power, so we enabled it.
> + };
> +
> + regulators {
> + ldo4_reg: LDO4 {
> + regulator-name = "P1.0V_LDO_OUT4";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "P1.0V_LDO_OUT5";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "vdd_mydp";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "P1.1V_LDO_OUT7";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "P1.0V_LDO_OUT8";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "P1.8V_LDO_OUT10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "P1.8V_LDO_OUT11";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "P3.0V_LDO_OUT12";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "P1.8V_LDO_OUT13";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "P1.8V_LDO_OUT14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "P1.0V_LDO_OUT15";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "P1.8V_LDO_OUT16";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "P2.8V_LDO_OUT17";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "vdd_bridge";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "P1.8V_BUCK_OUT5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <1>;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "P1.2V_BUCK_OUT6";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <0>;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "vdd_ummc";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> + };
> + };
> +};
> +
> +&i2c_1 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +};
> +
> +/*
> + * Disabled pullups since external part has its own pullups and
> + * double-pulling gets us out of spec in some cases.
> + */
> +&i2c2_bus {
> + samsung,pin-pud = <0>;
> +};
> +
> +&i2c_2 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +
> + hdmiddc at 50 {
> + compatible = "samsung,exynos4210-hdmiddc";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c_3 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_4 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +
> + cros_ec: embedded-controller {
> + compatible = "google,cros-ec-i2c";
> + reg = <0x1e>;
> + interrupts = <6 IRQ_TYPE_NONE>;
> + interrupt-parent = <&gpx1>;
> + wakeup-source;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ec_irq>;
> + };
> +};
> +
> +&i2c_5 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_7 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_8 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + hdmiphy: hdmiphy at 38 {
> + compatible = "samsung,exynos4212-hdmiphy";
> + reg = <0x38>;
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mfc {
> + samsung,mfc-r = <0x43000000 0x800000>;
> + samsung,mfc-l = <0x51000000 0x800000>;
Interesting that the copy of Snow that I see in linuxnext doesn't have
these, but from what I can tell they look OK. Maybe we should add
them for snow, too?
> +};
> +
> +&mmc_0 {
> + status = "okay";
> + num-slots = <1>;
> + supports-highspeed;
> + broken-cd;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
> +
> + slot at 0 {
> + reg = <0>;
> + bus-width = <8>;
> + };
> +};
> +
> +/*
> + * On Spring we've got SIP WiFi and so can keep drive strengths low to
> + * reduce EMI.
> + */
On both Spring and Snow this comment would be better where we redefine
sd1_clk, ... in the "pinctrl" section (I know that you're just copying
what's in the ChromeOS tree, but...)
> +&mmc_1 {
> + status = "okay";
> + num-slots = <1>;
> + supports-highspeed;
> + broken-cd;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
> +
> + slot at 0 {
> + reg = <0>;
> + bus-width = <4>;
> + };
> +};
> +
> +&pinctrl_0 {
> + s5m8767_dvs: s5m8767-dvs {
> + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + dp_hpd_gpio: dp-hpd-gpio {
> + samsung,pins = "gpc3-0";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + power_key_irq: power-key-irq {
> + samsung,pins = "gpx1-3";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
The fact that snow is missing the pinctrl lines for power and lid is a
bug on snow. Perhaps Javier would be interested in submitting a patch
to fix that?
> +
> + ec_irq: ec-irq {
> + samsung,pins = "gpx1-6";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + s5m8767_ds: s5m8767-ds {
> + samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + s5m8767_irq: s5m8767-irq {
> + samsung,pins = "gpx3-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + lid_irq: lid-irq {
> + samsung,pins = "gpx3-5";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hdmi_hpd_irq: hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_1 {
> + hsic_reset: hsic-reset {
> + samsung,pins = "gpe1-0";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&sd1_bus4 {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_cd {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_clk {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_cmd {
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> +};
> +
> +&spi_1 {
> + status = "okay";
> + samsung,spi-src-clk = <0>;
> + num-cs = <1>;
> +};
> +
> +#include "cros-ec-keyboard.dtsi"
Technically the missing pinctrl for hsic-reset is something that out
to be fixed and we should figure out whether the reset line is
actually working properly anyway. ...but I think this has been
through enough spins and any additional fixup can happen later, so you
can add my:
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-04 15:22 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-04 15:22 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Russell King, Ben Dooks, Kukjin Kim, open list,
Julius Werner
Andreas,
On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@suse.de> wrote:
> Adds initial support for the HP Chromebook 11.
>
> Cc: Vincent Palatin <vpalatin@chromium.org>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Stephan van Schaik <stephan@synkhronix.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v5 -> v6:
> * Updated for mfc node label
> * Reverted to dp-hpd-gpio node in pinctrl_0 (Doug Anderson)
> * Fixed alphabetical order of sd1_* nodes (Doug Anderson)
>
> v4 -> v5:
> * Dropped bogus USB3 regulator (Vincent Palatin, Tomasz Figa)
> * Fixed USB3503 reset GPIO (Tomasz Figa)
> * Introduced labels to use new referencing style consistently (Tomasz Figa)
> * Don't override dp_hpd, moved to pinctrl_0 instead (Tomasz Figa)
> * mmc_1: Added comment from Snow's mmc_3 (Tomasz Figa / Doug Anderson)
> * Override /codec samsung,mfc-{l,r} properties for alignment with Arndale
> * Use more GPIO_ACTIVE_* constants
> * Use IRQ_TYPE_* constants
> * Dropped s5m_ prefix for s5m8767 LDO regulator labels (max77686 is gone)
> * Labeled also all s5m8767 BUCK regulators
>
> v3 -> v4:
> * Fixed samsung,pin-function 1 -> 0 for dp-hpd-gpio
> * Replaced dp-hpd-gpio with existing dp_hpd, overriding it
>
> v2 -> v3:
> * Use GPIO_ACTIVE_{LOW,HIGH} (Doug Anderson)
> * Use symbolic KEY_POWER instead of comment
> * Moved hsic_reset to new USB3503 node's reset-gpios (Vincent Palatin)
> * Use dp_hpd_gpio for dp-controller (Doug Anderson, Ajay Kumar)
> * Override sd1_{clk,cmd,cd,bus4} pinctrl similar to Snow (Doug Anderson)
> * Added ec_irq pinctrl for cros_ec (Doug Anderson)
> * Reordered nodes to minimize diff against Snow (Doug Anderson)
> * Dropped obsolete mmc_2 override (Doug Anderson)
> * Added lid-switch node (Doug Anderson)
> * Added gpio-keys pinctrl (Doug Anderson)
> * Added bootargs to avoid empty /chosen node and to document console setting
> * Renamed s5m8767_pmic node to avoid underscore
> * Use new style for overriding inherited pinctrl nodes, too
> * Enable i2s0 node
>
> v1 -> v2:
> * Use label-based overriding/extension of nodes. (Doug Anderson)
> * Dropped tps65090 for now, until we know where to place it.
> * Dropped non-Spring nodes from -cros-common.dtsi rather than disabling them.
> * Enabled a missing MMC node for access to internal storage.
> * Dropped display-timings from dp-controller node. (Ajay Kumar)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++
> 2 files changed, 537 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 80a781f76e88..dec4c292f63d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> exynos5250-arndale.dtb \
> exynos5250-smdk5250.dtb \
> exynos5250-snow.dtb \
> + exynos5250-spring.dtb \
> exynos5260-xyref5260.dtb \
> exynos5410-smdk5410.dtb \
> exynos5420-arndale-octa.dtb \
> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
> new file mode 100644
> index 000000000000..f5566f84d885
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
> @@ -0,0 +1,536 @@
> +/*
> + * Google Spring board device tree source
> + *
> + * Copyright (c) 2013 Google, Inc
> + * Copyright (c) 2014 SUSE LINUX Products GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
> +#include "exynos5250.dtsi"
> +
> +/ {
> + model = "Google Spring";
> + compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
> +
> + memory {
> + reg = <0x40000000 0x80000000>;
> + };
> +
> + chosen {
> + bootargs = "console=tty1";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&power_key_irq>, <&lid_irq>;
> +
> + power {
> + label = "Power";
> + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + gpio-key,wakeup;
> + };
> +
> + lid-switch {
> + label = "Lid";
> + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
> + linux,input-type = <5>; /* EV_SW */
> + linux,code = <0>; /* SW_LID */
> + debounce-interval = <1>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + usb-hub {
> + compatible = "smsc,usb3503a";
> + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
> + };
Last I remember hearing about this, Julius said that the generic
usb-hub driver didn't work right for asserting the reset line.
Something about needing the reset at a very specific time in the USB
enumeration, I think. Maybe it's somehow been fixed since then and
that's why it's working?
Also: you technically should have a pinctrl-0 and pinctrl-names
referencing "hsic_reset" below to make sure the pin gets initted
properly.
> +
> + fixed-rate-clocks {
> + xxti {
> + compatible = "samsung,clock-xxti";
> + clock-frequency = <24000000>;
> + };
> + };
> +};
> +
> +&dp {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd_gpio>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x0a>;
> + samsung,lane-count = <1>;
> + samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&ehci {
> + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&fimd {
> + status = "okay";
> + samsung,invert-vclk;
> +};
> +
> +&hdmi {
> + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_hpd_irq>;
> + phy = <&hdmiphy>;
> + ddc = <&i2c_2>;
> + hdmi-en-supply = <&ldo8_reg>;
> + vdd-supply = <&ldo8_reg>;
> + vdd_osc-supply = <&ldo10_reg>;
> + vdd_pll-supply = <&ldo8_reg>;
> +};
> +
> +&i2c_0 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + s5m8767-pmic@66 {
> + compatible = "samsung,s5m8767-pmic";
> + reg = <0x66>;
> + interrupt-parent = <&gpx3>;
> + interrupts = <2 IRQ_TYPE_NONE>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
> + wakeup-source;
> +
> + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
> + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
> + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
> +
> + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
> + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
> + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
> +
> + /*
> + * The following arrays of DVS voltages are not used, since we are
> + * not using GPIOs to control PMIC bucks, but they must be defined
> + * to please the driver.
> + */
> + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
> + <1250000>, <1200000>,
> + <1150000>, <1100000>,
> + <1000000>, <950000>;
> +
> + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
> + <1100000>, <1100000>,
> + <1000000>, <1000000>,
> + <1000000>, <1000000>;
> +
> + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>;
> +
> + clocks {
> + compatible = "samsung,s5m8767-clk";
> + #clock-cells = <1>;
> + clock-output-names = "en32khz_ap",
> + "en32khz_cp",
> + "en32khz_bt";
On someone's todo list ought to be whether we need to enable
low-jitter mode like we did on Spring. Originally we enabled it on
snow because the TPM was unhappy without low-jitter but there was an
assumption that WiFi might be affected too. The low jitter mode
doesn't take much power, so we enabled it.
> + };
> +
> + regulators {
> + ldo4_reg: LDO4 {
> + regulator-name = "P1.0V_LDO_OUT4";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "P1.0V_LDO_OUT5";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "vdd_mydp";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "P1.1V_LDO_OUT7";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "P1.0V_LDO_OUT8";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "P1.8V_LDO_OUT10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "P1.8V_LDO_OUT11";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "P3.0V_LDO_OUT12";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "P1.8V_LDO_OUT13";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "P1.8V_LDO_OUT14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "P1.0V_LDO_OUT15";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "P1.8V_LDO_OUT16";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <3>;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "P2.8V_LDO_OUT17";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + op_mode = <0>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "vdd_bridge";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "P1.8V_BUCK_OUT5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <1>;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "P1.2V_BUCK_OUT6";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <0>;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "vdd_ummc";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <3>;
> + };
> + };
> + };
> +};
> +
> +&i2c_1 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +};
> +
> +/*
> + * Disabled pullups since external part has its own pullups and
> + * double-pulling gets us out of spec in some cases.
> + */
> +&i2c2_bus {
> + samsung,pin-pud = <0>;
> +};
> +
> +&i2c_2 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +
> + hdmiddc@50 {
> + compatible = "samsung,exynos4210-hdmiddc";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c_3 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_4 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +
> + cros_ec: embedded-controller {
> + compatible = "google,cros-ec-i2c";
> + reg = <0x1e>;
> + interrupts = <6 IRQ_TYPE_NONE>;
> + interrupt-parent = <&gpx1>;
> + wakeup-source;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ec_irq>;
> + };
> +};
> +
> +&i2c_5 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_7 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_8 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + hdmiphy: hdmiphy@38 {
> + compatible = "samsung,exynos4212-hdmiphy";
> + reg = <0x38>;
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mfc {
> + samsung,mfc-r = <0x43000000 0x800000>;
> + samsung,mfc-l = <0x51000000 0x800000>;
Interesting that the copy of Snow that I see in linuxnext doesn't have
these, but from what I can tell they look OK. Maybe we should add
them for snow, too?
> +};
> +
> +&mmc_0 {
> + status = "okay";
> + num-slots = <1>;
> + supports-highspeed;
> + broken-cd;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <8>;
> + };
> +};
> +
> +/*
> + * On Spring we've got SIP WiFi and so can keep drive strengths low to
> + * reduce EMI.
> + */
On both Spring and Snow this comment would be better where we redefine
sd1_clk, ... in the "pinctrl" section (I know that you're just copying
what's in the ChromeOS tree, but...)
> +&mmc_1 {
> + status = "okay";
> + num-slots = <1>;
> + supports-highspeed;
> + broken-cd;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <4>;
> + };
> +};
> +
> +&pinctrl_0 {
> + s5m8767_dvs: s5m8767-dvs {
> + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + dp_hpd_gpio: dp-hpd-gpio {
> + samsung,pins = "gpc3-0";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + power_key_irq: power-key-irq {
> + samsung,pins = "gpx1-3";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
The fact that snow is missing the pinctrl lines for power and lid is a
bug on snow. Perhaps Javier would be interested in submitting a patch
to fix that?
> +
> + ec_irq: ec-irq {
> + samsung,pins = "gpx1-6";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + s5m8767_ds: s5m8767-ds {
> + samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + s5m8767_irq: s5m8767-irq {
> + samsung,pins = "gpx3-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + lid_irq: lid-irq {
> + samsung,pins = "gpx3-5";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hdmi_hpd_irq: hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_1 {
> + hsic_reset: hsic-reset {
> + samsung,pins = "gpe1-0";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&sd1_bus4 {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_cd {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_clk {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd1_cmd {
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> +};
> +
> +&spi_1 {
> + status = "okay";
> + samsung,spi-src-clk = <0>;
> + num-cs = <1>;
> +};
> +
> +#include "cros-ec-keyboard.dtsi"
Technically the missing pinctrl for hsic-reset is something that out
to be fixed and we should figure out whether the reset line is
actually working properly anyway. ...but I think this has been
through enough spins and any additional fixup can happen later, so you
can add my:
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
2014-08-04 15:22 ` Doug Anderson
(?)
@ 2014-08-04 17:31 ` Javier Martinez Canillas
-1 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-04 17:31 UTC (permalink / raw)
To: Doug Anderson, Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Tomasz Figa, Rob Herring,
Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Ben Dooks, Kukjin Kim, open list, Julius Werner
Hello Doug,
On 08/04/2014 05:22 PM, Doug Anderson wrote:
>> +
>> +&pinctrl_0 {
>> + s5m8767_dvs: s5m8767-dvs {
>> + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <1>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + dp_hpd_gpio: dp-hpd-gpio {
>> + samsung,pins = "gpc3-0";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <3>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + power_key_irq: power-key-irq {
>> + samsung,pins = "gpx1-3";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <0>;
>> + samsung,pin-drv = <0>;
>> + };
>
> The fact that snow is missing the pinctrl lines for power and lid is a
> bug on snow. Perhaps Javier would be interested in submitting a patch
> to fix that?
>
>
Sure, added on my TODO list to not only add these missing pin control lines for
lid and power and reference them on gpio-keys but also to double check if there
is anything else missing in the mainline Snow DTS that is on the downstream
Chrome OS one.
I'll wait for Andreas series to be picked by Kukjin before submit a patch though
to avoid any unnecessary churn.
Best regards,
Javier
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-04 17:31 ` Javier Martinez Canillas
0 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-04 17:31 UTC (permalink / raw)
To: linux-arm-kernel
Hello Doug,
On 08/04/2014 05:22 PM, Doug Anderson wrote:
>> +
>> +&pinctrl_0 {
>> + s5m8767_dvs: s5m8767-dvs {
>> + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <1>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + dp_hpd_gpio: dp-hpd-gpio {
>> + samsung,pins = "gpc3-0";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <3>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + power_key_irq: power-key-irq {
>> + samsung,pins = "gpx1-3";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <0>;
>> + samsung,pin-drv = <0>;
>> + };
>
> The fact that snow is missing the pinctrl lines for power and lid is a
> bug on snow. Perhaps Javier would be interested in submitting a patch
> to fix that?
>
>
Sure, added on my TODO list to not only add these missing pin control lines for
lid and power and reference them on gpio-keys but also to double check if there
is anything else missing in the mainline Snow DTS that is on the downstream
Chrome OS one.
I'll wait for Andreas series to be picked by Kukjin before submit a patch though
to avoid any unnecessary churn.
Best regards,
Javier
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-04 17:31 ` Javier Martinez Canillas
0 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-04 17:31 UTC (permalink / raw)
To: Doug Anderson, Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Tomasz Figa, Rob Herring,
Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Ben Dooks, Kukjin Kim, open list, Julius Werner
Hello Doug,
On 08/04/2014 05:22 PM, Doug Anderson wrote:
>> +
>> +&pinctrl_0 {
>> + s5m8767_dvs: s5m8767-dvs {
>> + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <1>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + dp_hpd_gpio: dp-hpd-gpio {
>> + samsung,pins = "gpc3-0";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <3>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + power_key_irq: power-key-irq {
>> + samsung,pins = "gpx1-3";
>> + samsung,pin-function = <0>;
>> + samsung,pin-pud = <0>;
>> + samsung,pin-drv = <0>;
>> + };
>
> The fact that snow is missing the pinctrl lines for power and lid is a
> bug on snow. Perhaps Javier would be interested in submitting a patch
> to fix that?
>
>
Sure, added on my TODO list to not only add these missing pin control lines for
lid and power and reference them on gpio-keys but also to double check if there
is anything else missing in the mainline Snow DTS that is on the downstream
Chrome OS one.
I'll wait for Andreas series to be picked by Kukjin before submit a patch though
to avoid any unnecessary churn.
Best regards,
Javier
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
2014-08-04 15:22 ` Doug Anderson
(?)
@ 2014-08-20 12:50 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-20 12:50 UTC (permalink / raw)
To: Doug Anderson, Kukjin Kim
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Russell King, Ben Dooks, LKML, Julius Werner
Kukjin,
Am 04.08.2014 17:22, schrieb Doug Anderson:
> On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@suse.de> wrote:
>> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
>> new file mode 100644
>> index 000000000000..f5566f84d885
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
[...]
>> + usb-hub {
>> + compatible = "smsc,usb3503a";
>> + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
>> + };
>
> Last I remember hearing about this, Julius said that the generic
> usb-hub driver didn't work right for asserting the reset line.
> Something about needing the reset at a very specific time in the USB
> enumeration, I think. Maybe it's somehow been fixed since then and
> that's why it's working?
>
> Also: you technically should have a pinctrl-0 and pinctrl-names
> referencing "hsic_reset" below to make sure the pin gets initted
> properly.
[...]
> Technically the missing pinctrl for hsic-reset is something that out
> to be fixed and we should figure out whether the reset line is
> actually working properly anyway. ...but I think this has been
> through enough spins and any additional fixup can happen later, so you
> can add my:
>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
I wonder how to proceed now... Are you planning to continue inserting my
remaining snow/smdk/arndale refactoring patches [1,2,3,4] before the mmc
slot node refactoring on v3.18-next/dt-samsung branch?
I.e., should I send out a v7 rebasing either the remainder or just
Spring on top of your for-next, or should I just post new follow-up
patches to this series and wait?
I've prepared and successfully tested a patch adding the pinctrl Doug
requested above. Additionally, I have another follow-up ready, adding a
gmt,g781 temperature sensor (with v3.17-rc1 that actually works).
Also I understood that Javier is waiting for my remaining Snow bits to
be applied before sending out further Snow DT cleanups/fixes of his.
Thanks,
Andreas
[1] https://patchwork.kernel.org/patch/4664881/
[2] https://patchwork.kernel.org/patch/4664801/
[3] https://patchwork.kernel.org/patch/4664731/
[4] https://patchwork.kernel.org/patch/4664751/
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-20 12:50 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-20 12:50 UTC (permalink / raw)
To: linux-arm-kernel
Kukjin,
Am 04.08.2014 17:22, schrieb Doug Anderson:
> On Fri, Aug 1, 2014 at 5:52 PM, Andreas F?rber <afaerber@suse.de> wrote:
>> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
>> new file mode 100644
>> index 000000000000..f5566f84d885
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
[...]
>> + usb-hub {
>> + compatible = "smsc,usb3503a";
>> + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
>> + };
>
> Last I remember hearing about this, Julius said that the generic
> usb-hub driver didn't work right for asserting the reset line.
> Something about needing the reset at a very specific time in the USB
> enumeration, I think. Maybe it's somehow been fixed since then and
> that's why it's working?
>
> Also: you technically should have a pinctrl-0 and pinctrl-names
> referencing "hsic_reset" below to make sure the pin gets initted
> properly.
[...]
> Technically the missing pinctrl for hsic-reset is something that out
> to be fixed and we should figure out whether the reset line is
> actually working properly anyway. ...but I think this has been
> through enough spins and any additional fixup can happen later, so you
> can add my:
>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
I wonder how to proceed now... Are you planning to continue inserting my
remaining snow/smdk/arndale refactoring patches [1,2,3,4] before the mmc
slot node refactoring on v3.18-next/dt-samsung branch?
I.e., should I send out a v7 rebasing either the remainder or just
Spring on top of your for-next, or should I just post new follow-up
patches to this series and wait?
I've prepared and successfully tested a patch adding the pinctrl Doug
requested above. Additionally, I have another follow-up ready, adding a
gmt,g781 temperature sensor (with v3.17-rc1 that actually works).
Also I understood that Javier is waiting for my remaining Snow bits to
be applied before sending out further Snow DT cleanups/fixes of his.
Thanks,
Andreas
[1] https://patchwork.kernel.org/patch/4664881/
[2] https://patchwork.kernel.org/patch/4664801/
[3] https://patchwork.kernel.org/patch/4664731/
[4] https://patchwork.kernel.org/patch/4664751/
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
^ permalink raw reply [flat|nested] 98+ messages in thread* Re: [PATCH v6 10/10] ARM: dts: Add exynos5250-spring device tree
@ 2014-08-20 12:50 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-20 12:50 UTC (permalink / raw)
To: Doug Anderson, Kukjin Kim
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Javier Martinez Canillas,
Tomasz Figa, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Russell King, Ben Dooks, LKML, Julius Werner
Kukjin,
Am 04.08.2014 17:22, schrieb Doug Anderson:
> On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@suse.de> wrote:
>> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
>> new file mode 100644
>> index 000000000000..f5566f84d885
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
[...]
>> + usb-hub {
>> + compatible = "smsc,usb3503a";
>> + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
>> + };
>
> Last I remember hearing about this, Julius said that the generic
> usb-hub driver didn't work right for asserting the reset line.
> Something about needing the reset at a very specific time in the USB
> enumeration, I think. Maybe it's somehow been fixed since then and
> that's why it's working?
>
> Also: you technically should have a pinctrl-0 and pinctrl-names
> referencing "hsic_reset" below to make sure the pin gets initted
> properly.
[...]
> Technically the missing pinctrl for hsic-reset is something that out
> to be fixed and we should figure out whether the reset line is
> actually working properly anyway. ...but I think this has been
> through enough spins and any additional fixup can happen later, so you
> can add my:
>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
I wonder how to proceed now... Are you planning to continue inserting my
remaining snow/smdk/arndale refactoring patches [1,2,3,4] before the mmc
slot node refactoring on v3.18-next/dt-samsung branch?
I.e., should I send out a v7 rebasing either the remainder or just
Spring on top of your for-next, or should I just post new follow-up
patches to this series and wait?
I've prepared and successfully tested a patch adding the pinctrl Doug
requested above. Additionally, I have another follow-up ready, adding a
gmt,g781 temperature sensor (with v3.17-rc1 that actually works).
Also I understood that Javier is waiting for my remaining Snow bits to
be applied before sending out further Snow DT cleanups/fixes of his.
Thanks,
Andreas
[1] https://patchwork.kernel.org/patch/4664881/
[2] https://patchwork.kernel.org/patch/4664801/
[3] https://patchwork.kernel.org/patch/4664731/
[4] https://patchwork.kernel.org/patch/4664751/
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
2014-08-02 0:52 ` Andreas Färber
@ 2014-08-02 2:34 ` Javier Martinez Canillas
-1 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-02 2:34 UTC (permalink / raw)
To: Andreas Färber, linux-samsung-soc
Cc: linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Doug Anderson, Tomasz Figa
Hello Andreas
On 08/02/2014 02:52 AM, Andreas Färber wrote:
>
> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
> based attempts by Stephan and me that broke for 3.16, I've prepared a
> device tree for the HP Chromebook 11 aka Google Spring.
>
> v6 renames a node and reverts dp_hpd.
>
> Not yet enabled are trackpad, Wifi and sound.
>
> My rebasing branch for testing is here:
> https://github.com/afaerber/linux/commits/spring-next
>
> Regards,
> Andreas
>
I made a comment on patch 05/10 but the rest of the series looks good to me. So
for the remaining patches:
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole
series as well but I didn't see his tag on the v6 patches.
Best regards,
Javier
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-02 2:34 ` Javier Martinez Canillas
0 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-02 2:34 UTC (permalink / raw)
To: linux-arm-kernel
Hello Andreas
On 08/02/2014 02:52 AM, Andreas F?rber wrote:
>
> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
> based attempts by Stephan and me that broke for 3.16, I've prepared a
> device tree for the HP Chromebook 11 aka Google Spring.
>
> v6 renames a node and reverts dp_hpd.
>
> Not yet enabled are trackpad, Wifi and sound.
>
> My rebasing branch for testing is here:
> https://github.com/afaerber/linux/commits/spring-next
>
> Regards,
> Andreas
>
I made a comment on patch 05/10 but the rest of the series looks good to me. So
for the remaining patches:
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole
series as well but I didn't see his tag on the v6 patches.
Best regards,
Javier
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
2014-08-02 2:34 ` Javier Martinez Canillas
@ 2014-08-02 4:57 ` Doug Anderson
-1 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-02 4:57 UTC (permalink / raw)
To: Javier Martinez Canillas
Cc: Andreas Färber, linux-samsung-soc, linux-arm-kernel,
devicetree, Stephan van Schaik, Vincent Palatin, Tomasz Figa
Hi,
On Fri, Aug 1, 2014 at 7:34 PM, Javier Martinez Canillas
<javier.martinez@collabora.co.uk> wrote:
> Hello Andreas
>
> On 08/02/2014 02:52 AM, Andreas Färber wrote:
>>
>> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
>> based attempts by Stephan and me that broke for 3.16, I've prepared a
>> device tree for the HP Chromebook 11 aka Google Spring.
>>
>> v6 renames a node and reverts dp_hpd.
>>
>> Not yet enabled are trackpad, Wifi and sound.
>>
>> My rebasing branch for testing is here:
>> https://github.com/afaerber/linux/commits/spring-next
>>
>> Regards,
>> Andreas
>>
>
> I made a comment on patch 05/10 but the rest of the series looks good to me. So
> for the remaining patches:
>
> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>
> NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole
> series as well but I didn't see his tag on the v6 patches.
Yes, I thought that too. I assume he's OK with the small changes you
made between v5 and v6. In the very least his Reviewed-by could be
present on the patches that didn't change between the last two revs.
Given Javier's review and Tomasz's review and Vincent's comments, I'll
probably skip all the work of reviewing the rest of the series unless
someone really wants me to. ;)
-Doug
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-02 4:57 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-02 4:57 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Fri, Aug 1, 2014 at 7:34 PM, Javier Martinez Canillas
<javier.martinez@collabora.co.uk> wrote:
> Hello Andreas
>
> On 08/02/2014 02:52 AM, Andreas F?rber wrote:
>>
>> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
>> based attempts by Stephan and me that broke for 3.16, I've prepared a
>> device tree for the HP Chromebook 11 aka Google Spring.
>>
>> v6 renames a node and reverts dp_hpd.
>>
>> Not yet enabled are trackpad, Wifi and sound.
>>
>> My rebasing branch for testing is here:
>> https://github.com/afaerber/linux/commits/spring-next
>>
>> Regards,
>> Andreas
>>
>
> I made a comment on patch 05/10 but the rest of the series looks good to me. So
> for the remaining patches:
>
> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>
> NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole
> series as well but I didn't see his tag on the v6 patches.
Yes, I thought that too. I assume he's OK with the small changes you
made between v5 and v6. In the very least his Reviewed-by could be
present on the patches that didn't change between the last two revs.
Given Javier's review and Tomasz's review and Vincent's comments, I'll
probably skip all the work of reviewing the rest of the series unless
someone really wants me to. ;)
-Doug
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
2014-08-02 4:57 ` Doug Anderson
@ 2014-08-02 10:25 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 10:25 UTC (permalink / raw)
To: Doug Anderson, Javier Martinez Canillas
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Tomasz Figa
Hi,
Am 02.08.2014 06:57, schrieb Doug Anderson:
> On Fri, Aug 1, 2014 at 7:34 PM, Javier Martinez Canillas
> <javier.martinez@collabora.co.uk> wrote:
>> On 08/02/2014 02:52 AM, Andreas Färber wrote:
>>>
>>> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
>>> based attempts by Stephan and me that broke for 3.16, I've prepared a
>>> device tree for the HP Chromebook 11 aka Google Spring.
>>>
>>> v6 renames a node and reverts dp_hpd.
>>>
>>> Not yet enabled are trackpad, Wifi and sound.
>>
>> I made a comment on patch 05/10 but the rest of the series looks good to me. So
>> for the remaining patches:
>>
>> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>>
>> NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole
>> series as well but I didn't see his tag on the v6 patches.
>
> Yes, I thought that too. I assume he's OK with the small changes you
> made between v5 and v6. In the very least his Reviewed-by could be
> present on the patches that didn't change between the last two revs.
I did add it to the bootargs, GPIO, USB3503 patches. All other patches
were either split off or slightly changed due to dp_hpd[_gpio], so I
didn't carry it over.
> Given Javier's review and Tomasz's review and Vincent's comments, I'll
> probably skip all the work of reviewing the rest of the series unless
> someone really wants me to. ;)
Could you maybe give an Rb or Ab for the actual Spring patch to have the
Cc: updated? :)
Note that if there's some problem that can't be resolved by selectively
dropping patches, I won't be available next week, so you'll either have
to provide fixups for Kukjin to squash or wait till I've returned.
One thing I've wondered is whether we should put status = "disabled" on
the dp node with some comment, since it's known not to work as is (but
better having the data here than leaving it out, I believe).
Of course if either of you has input on the discussions on the drm
bridge/panel series V6 [1] for how to enable non-simplefb display and
iommus, that would be valuable.
[1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html
And when one thing is accomplished, I am always quick to look forward:
I've taken a quick look at sound nodes: According to 3.8 DT, Spring uses
max98089 whereas Snow has 98091, so different codec driver and still
lacking DT binding support. I might look into trivially enabling
sound/soc/codecs/max98089.c through a "maxim,max98089" OF match table
once this series lands in linux-next. As for the driver, can we reuse
http://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/tree/sound/soc/samsung/snow.c?h=for-next
with a "google,spring-audio-max98089", or are code changes needed?
Both of you mentioned limitations of cros_ec i2c passthrough leading to
a forked tps65090 driver downstream - I don't think I can be of help
there, as I guess simply copying a driver will not be an option. ;)
https://code.google.com/p/chromium/issues/detail?id=391797
For the touchpad it seems DT support has landed in the input tree as
"atmel,maxtouch". Backporting just that patch does not make it work
though. (Tried the rejected pinctrl approach to be on the safe side.)
https://code.google.com/p/chromium/issues/detail?id=371114
https://patchwork.kernel.org/patch/3976801/
I thought the internal xhci would have the webcam on it, but I don't see
it in lsusb. Does that need some pinctrl or tps65090 regulator? Once
appearing on a bus, which driver config option will it need?
Many thanks for your support,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-02 10:25 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 10:25 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Am 02.08.2014 06:57, schrieb Doug Anderson:
> On Fri, Aug 1, 2014 at 7:34 PM, Javier Martinez Canillas
> <javier.martinez@collabora.co.uk> wrote:
>> On 08/02/2014 02:52 AM, Andreas F?rber wrote:
>>>
>>> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
>>> based attempts by Stephan and me that broke for 3.16, I've prepared a
>>> device tree for the HP Chromebook 11 aka Google Spring.
>>>
>>> v6 renames a node and reverts dp_hpd.
>>>
>>> Not yet enabled are trackpad, Wifi and sound.
>>
>> I made a comment on patch 05/10 but the rest of the series looks good to me. So
>> for the remaining patches:
>>
>> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>>
>> NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole
>> series as well but I didn't see his tag on the v6 patches.
>
> Yes, I thought that too. I assume he's OK with the small changes you
> made between v5 and v6. In the very least his Reviewed-by could be
> present on the patches that didn't change between the last two revs.
I did add it to the bootargs, GPIO, USB3503 patches. All other patches
were either split off or slightly changed due to dp_hpd[_gpio], so I
didn't carry it over.
> Given Javier's review and Tomasz's review and Vincent's comments, I'll
> probably skip all the work of reviewing the rest of the series unless
> someone really wants me to. ;)
Could you maybe give an Rb or Ab for the actual Spring patch to have the
Cc: updated? :)
Note that if there's some problem that can't be resolved by selectively
dropping patches, I won't be available next week, so you'll either have
to provide fixups for Kukjin to squash or wait till I've returned.
One thing I've wondered is whether we should put status = "disabled" on
the dp node with some comment, since it's known not to work as is (but
better having the data here than leaving it out, I believe).
Of course if either of you has input on the discussions on the drm
bridge/panel series V6 [1] for how to enable non-simplefb display and
iommus, that would be valuable.
[1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html
And when one thing is accomplished, I am always quick to look forward:
I've taken a quick look at sound nodes: According to 3.8 DT, Spring uses
max98089 whereas Snow has 98091, so different codec driver and still
lacking DT binding support. I might look into trivially enabling
sound/soc/codecs/max98089.c through a "maxim,max98089" OF match table
once this series lands in linux-next. As for the driver, can we reuse
http://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/tree/sound/soc/samsung/snow.c?h=for-next
with a "google,spring-audio-max98089", or are code changes needed?
Both of you mentioned limitations of cros_ec i2c passthrough leading to
a forked tps65090 driver downstream - I don't think I can be of help
there, as I guess simply copying a driver will not be an option. ;)
https://code.google.com/p/chromium/issues/detail?id=391797
For the touchpad it seems DT support has landed in the input tree as
"atmel,maxtouch". Backporting just that patch does not make it work
though. (Tried the rejected pinctrl approach to be on the safe side.)
https://code.google.com/p/chromium/issues/detail?id=371114
https://patchwork.kernel.org/patch/3976801/
I thought the internal xhci would have the webcam on it, but I don't see
it in lsusb. Does that need some pinctrl or tps65090 regulator? Once
appearing on a bus, which driver config option will it need?
Many thanks for your support,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
2014-08-02 10:25 ` Andreas Färber
@ 2014-08-02 13:13 ` Tomasz Figa
-1 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:13 UTC (permalink / raw)
To: Andreas Färber, Doug Anderson, Javier Martinez Canillas
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Tomasz Figa
On 02.08.2014 12:25, Andreas Färber wrote:
[snip]
> One thing I've wondered is whether we should put status = "disabled" on
> the dp node with some comment, since it's known not to work as is (but
> better having the data here than leaving it out, I believe).
Does the DP node itself need more data to work or just some external
things are missing? If the former then probably status = "disabled"
should be set, otherwise "okay" is fine if provided data are enough to
probe the Exynos DP driver.
>
> Of course if either of you has input on the discussions on the drm
> bridge/panel series V6 [1] for how to enable non-simplefb display and
> iommus, that would be valuable.
Support for Exynos IOMMU is being worked on right now and patches adding
DT support from Marek Szyprowski should show up on the lists in very
near future. However I think you don't strictly need IOMMU to get
non-simplefb display, as CMA can be used to allocate contiguous memory.
>
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html
>
[snip]
> For the touchpad it seems DT support has landed in the input tree as
> "atmel,maxtouch". Backporting just that patch does not make it work
> though. (Tried the rejected pinctrl approach to be on the safe side.)
> https://code.google.com/p/chromium/issues/detail?id=371114
> https://patchwork.kernel.org/patch/3976801/
Looking at what we already have in mainline and the discussion in
Chromium issue tracker, current driver should be already in shape to
handle the Chromebooks. Apparently it even supports recovery from
bootloader mode without the need to parse bootloader address from DT (it
somehow calculates possible addresses from main address).
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-02 13:13 ` Tomasz Figa
0 siblings, 0 replies; 98+ messages in thread
From: Tomasz Figa @ 2014-08-02 13:13 UTC (permalink / raw)
To: linux-arm-kernel
On 02.08.2014 12:25, Andreas F?rber wrote:
[snip]
> One thing I've wondered is whether we should put status = "disabled" on
> the dp node with some comment, since it's known not to work as is (but
> better having the data here than leaving it out, I believe).
Does the DP node itself need more data to work or just some external
things are missing? If the former then probably status = "disabled"
should be set, otherwise "okay" is fine if provided data are enough to
probe the Exynos DP driver.
>
> Of course if either of you has input on the discussions on the drm
> bridge/panel series V6 [1] for how to enable non-simplefb display and
> iommus, that would be valuable.
Support for Exynos IOMMU is being worked on right now and patches adding
DT support from Marek Szyprowski should show up on the lists in very
near future. However I think you don't strictly need IOMMU to get
non-simplefb display, as CMA can be used to allocate contiguous memory.
>
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html
>
[snip]
> For the touchpad it seems DT support has landed in the input tree as
> "atmel,maxtouch". Backporting just that patch does not make it work
> though. (Tried the rejected pinctrl approach to be on the safe side.)
> https://code.google.com/p/chromium/issues/detail?id=371114
> https://patchwork.kernel.org/patch/3976801/
Looking at what we already have in mainline and the discussion in
Chromium issue tracker, current driver should be already in shape to
handle the Chromebooks. Apparently it even supports recovery from
bootloader mode without the need to parse bootloader address from DT (it
somehow calculates possible addresses from main address).
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
2014-08-02 13:13 ` Tomasz Figa
@ 2014-08-02 16:05 ` Andreas Färber
-1 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 16:05 UTC (permalink / raw)
To: Tomasz Figa
Cc: Doug Anderson, Javier Martinez Canillas, linux-samsung-soc,
linux-arm-kernel, devicetree, Stephan van Schaik,
Vincent Palatin, Tomasz Figa
Am 02.08.2014 15:13, schrieb Tomasz Figa:
> On 02.08.2014 12:25, Andreas Färber wrote:
>> One thing I've wondered is whether we should put status = "disabled" on
>> the dp node with some comment, since it's known not to work as is (but
>> better having the data here than leaving it out, I believe).
>
> Does the DP node itself need more data to work or just some external
> things are missing? If the former then probably status = "disabled"
> should be set, otherwise "okay" is fine if provided data are enough to
> probe the Exynos DP driver.
Support for ps8622 eDP/LVDS bridge has not yet landed in the drm tree.
The latest patch series V6 adds a "bridge" property to /dp-controller.
It further requires a simple-panel node and a node for the ps8622:
http://www.spinics.net/lists/linux-samsung-soc/msg35089.html
>> Of course if either of you has input on the discussions on the drm
>> bridge/panel series V6 [1] for how to enable non-simplefb display and
>> iommus, that would be valuable.
>
> Support for Exynos IOMMU is being worked on right now and patches adding
> DT support from Marek Szyprowski should show up on the lists in very
> near future.
Okay, good to hear.
> However I think you don't strictly need IOMMU to get
> non-simplefb display, as CMA can be used to allocate contiguous memory.
I do have CMA enabled, but it wasn't working without iommu patches
either. Machine booted, and display had backlight but stayed black.
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7
Ajay has reported the same patches working on his Skate.
Regards,
Andreas
>> [1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-02 16:05 ` Andreas Färber
0 siblings, 0 replies; 98+ messages in thread
From: Andreas Färber @ 2014-08-02 16:05 UTC (permalink / raw)
To: linux-arm-kernel
Am 02.08.2014 15:13, schrieb Tomasz Figa:
> On 02.08.2014 12:25, Andreas F?rber wrote:
>> One thing I've wondered is whether we should put status = "disabled" on
>> the dp node with some comment, since it's known not to work as is (but
>> better having the data here than leaving it out, I believe).
>
> Does the DP node itself need more data to work or just some external
> things are missing? If the former then probably status = "disabled"
> should be set, otherwise "okay" is fine if provided data are enough to
> probe the Exynos DP driver.
Support for ps8622 eDP/LVDS bridge has not yet landed in the drm tree.
The latest patch series V6 adds a "bridge" property to /dp-controller.
It further requires a simple-panel node and a node for the ps8622:
http://www.spinics.net/lists/linux-samsung-soc/msg35089.html
>> Of course if either of you has input on the discussions on the drm
>> bridge/panel series V6 [1] for how to enable non-simplefb display and
>> iommus, that would be valuable.
>
> Support for Exynos IOMMU is being worked on right now and patches adding
> DT support from Marek Szyprowski should show up on the lists in very
> near future.
Okay, good to hear.
> However I think you don't strictly need IOMMU to get
> non-simplefb display, as CMA can be used to allocate contiguous memory.
I do have CMA enabled, but it wasn't working without iommu patches
either. Machine booted, and display had backlight but stayed black.
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7
Ajay has reported the same patches working on his Skate.
Regards,
Andreas
>> [1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
2014-08-02 10:25 ` Andreas Färber
@ 2014-08-04 15:42 ` Doug Anderson
-1 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-04 15:42 UTC (permalink / raw)
To: Andreas Färber
Cc: Javier Martinez Canillas, linux-samsung-soc, linux-arm-kernel,
devicetree, Stephan van Schaik, Vincent Palatin, Tomasz Figa,
Dmitry Torokhov
Andreas,
On Sat, Aug 2, 2014 at 3:25 AM, Andreas Färber <afaerber@suse.de> wrote:
> Hi,
>
> Am 02.08.2014 06:57, schrieb Doug Anderson:
>> On Fri, Aug 1, 2014 at 7:34 PM, Javier Martinez Canillas
>> <javier.martinez@collabora.co.uk> wrote:
>>> On 08/02/2014 02:52 AM, Andreas Färber wrote:
>>>>
>>>> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
>>>> based attempts by Stephan and me that broke for 3.16, I've prepared a
>>>> device tree for the HP Chromebook 11 aka Google Spring.
>>>>
>>>> v6 renames a node and reverts dp_hpd.
>>>>
>>>> Not yet enabled are trackpad, Wifi and sound.
>>>
>>> I made a comment on patch 05/10 but the rest of the series looks good to me. So
>>> for the remaining patches:
>>>
>>> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>>>
>>> NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole
>>> series as well but I didn't see his tag on the v6 patches.
>>
>> Yes, I thought that too. I assume he's OK with the small changes you
>> made between v5 and v6. In the very least his Reviewed-by could be
>> present on the patches that didn't change between the last two revs.
>
> I did add it to the bootargs, GPIO, USB3503 patches. All other patches
> were either split off or slightly changed due to dp_hpd[_gpio], so I
> didn't carry it over.
>
>> Given Javier's review and Tomasz's review and Vincent's comments, I'll
>> probably skip all the work of reviewing the rest of the series unless
>> someone really wants me to. ;)
>
> Could you maybe give an Rb or Ab for the actual Spring patch to have the
> Cc: updated? :)
Done.
> Note that if there's some problem that can't be resolved by selectively
> dropping patches, I won't be available next week, so you'll either have
> to provide fixups for Kukjin to squash or wait till I've returned.
>
> One thing I've wondered is whether we should put status = "disabled" on
> the dp node with some comment, since it's known not to work as is (but
> better having the data here than leaving it out, I believe).
Don't know about this one.
> Of course if either of you has input on the discussions on the drm
> bridge/panel series V6 [1] for how to enable non-simplefb display and
> iommus, that would be valuable.
I've been letting the graphics folks and Samsung hash out the graphics
patches, so I don't think I'll be much help here.
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html
>
>
> And when one thing is accomplished, I am always quick to look forward:
>
> I've taken a quick look at sound nodes: According to 3.8 DT, Spring uses
> max98089 whereas Snow has 98091, so different codec driver and still
> lacking DT binding support. I might look into trivially enabling
> sound/soc/codecs/max98089.c through a "maxim,max98089" OF match table
> once this series lands in linux-next. As for the driver, can we reuse
> http://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/tree/sound/soc/samsung/snow.c?h=for-next
> with a "google,spring-audio-max98089", or are code changes needed?
I don't know this offhand.
> Both of you mentioned limitations of cros_ec i2c passthrough leading to
> a forked tps65090 driver downstream - I don't think I can be of help
> there, as I guess simply copying a driver will not be an option. ;)
> https://code.google.com/p/chromium/issues/detail?id=391797
Yup, I think this will be real work for someone. I made a quick
attempt and failed at it and I haven't had time to work on it since
(and don't necessarily expect to have time in the near future)... I
think it is possible for anyone versed in i2c to figure this out based
on what I already posted and what's in our local tree...
> For the touchpad it seems DT support has landed in the input tree as
> "atmel,maxtouch". Backporting just that patch does not make it work
> though. (Tried the rejected pinctrl approach to be on the safe side.)
> https://code.google.com/p/chromium/issues/detail?id=371114
> https://patchwork.kernel.org/patch/3976801/
This is the same work as needed for pit and pi, I believe. Perhaps
Javier or Dmitry has this on their todo list?
> I thought the internal xhci would have the webcam on it, but I don't see
> it in lsusb. Does that need some pinctrl or tps65090 regulator? Once
> appearing on a bus, which driver config option will it need?
Perhaps tps65090 FET5? That looks like what the device tree says in
our local tree.
-Doug
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-04 15:42 ` Doug Anderson
0 siblings, 0 replies; 98+ messages in thread
From: Doug Anderson @ 2014-08-04 15:42 UTC (permalink / raw)
To: linux-arm-kernel
Andreas,
On Sat, Aug 2, 2014 at 3:25 AM, Andreas F?rber <afaerber@suse.de> wrote:
> Hi,
>
> Am 02.08.2014 06:57, schrieb Doug Anderson:
>> On Fri, Aug 1, 2014 at 7:34 PM, Javier Martinez Canillas
>> <javier.martinez@collabora.co.uk> wrote:
>>> On 08/02/2014 02:52 AM, Andreas F?rber wrote:
>>>>
>>>> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
>>>> based attempts by Stephan and me that broke for 3.16, I've prepared a
>>>> device tree for the HP Chromebook 11 aka Google Spring.
>>>>
>>>> v6 renames a node and reverts dp_hpd.
>>>>
>>>> Not yet enabled are trackpad, Wifi and sound.
>>>
>>> I made a comment on patch 05/10 but the rest of the series looks good to me. So
>>> for the remaining patches:
>>>
>>> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>>>
>>> NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole
>>> series as well but I didn't see his tag on the v6 patches.
>>
>> Yes, I thought that too. I assume he's OK with the small changes you
>> made between v5 and v6. In the very least his Reviewed-by could be
>> present on the patches that didn't change between the last two revs.
>
> I did add it to the bootargs, GPIO, USB3503 patches. All other patches
> were either split off or slightly changed due to dp_hpd[_gpio], so I
> didn't carry it over.
>
>> Given Javier's review and Tomasz's review and Vincent's comments, I'll
>> probably skip all the work of reviewing the rest of the series unless
>> someone really wants me to. ;)
>
> Could you maybe give an Rb or Ab for the actual Spring patch to have the
> Cc: updated? :)
Done.
> Note that if there's some problem that can't be resolved by selectively
> dropping patches, I won't be available next week, so you'll either have
> to provide fixups for Kukjin to squash or wait till I've returned.
>
> One thing I've wondered is whether we should put status = "disabled" on
> the dp node with some comment, since it's known not to work as is (but
> better having the data here than leaving it out, I believe).
Don't know about this one.
> Of course if either of you has input on the discussions on the drm
> bridge/panel series V6 [1] for how to enable non-simplefb display and
> iommus, that would be valuable.
I've been letting the graphics folks and Samsung hash out the graphics
patches, so I don't think I'll be much help here.
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html
>
>
> And when one thing is accomplished, I am always quick to look forward:
>
> I've taken a quick look at sound nodes: According to 3.8 DT, Spring uses
> max98089 whereas Snow has 98091, so different codec driver and still
> lacking DT binding support. I might look into trivially enabling
> sound/soc/codecs/max98089.c through a "maxim,max98089" OF match table
> once this series lands in linux-next. As for the driver, can we reuse
> http://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/tree/sound/soc/samsung/snow.c?h=for-next
> with a "google,spring-audio-max98089", or are code changes needed?
I don't know this offhand.
> Both of you mentioned limitations of cros_ec i2c passthrough leading to
> a forked tps65090 driver downstream - I don't think I can be of help
> there, as I guess simply copying a driver will not be an option. ;)
> https://code.google.com/p/chromium/issues/detail?id=391797
Yup, I think this will be real work for someone. I made a quick
attempt and failed at it and I haven't had time to work on it since
(and don't necessarily expect to have time in the near future)... I
think it is possible for anyone versed in i2c to figure this out based
on what I already posted and what's in our local tree...
> For the touchpad it seems DT support has landed in the input tree as
> "atmel,maxtouch". Backporting just that patch does not make it work
> though. (Tried the rejected pinctrl approach to be on the safe side.)
> https://code.google.com/p/chromium/issues/detail?id=371114
> https://patchwork.kernel.org/patch/3976801/
This is the same work as needed for pit and pi, I believe. Perhaps
Javier or Dmitry has this on their todo list?
> I thought the internal xhci would have the webcam on it, but I don't see
> it in lsusb. Does that need some pinctrl or tps65090 regulator? Once
> appearing on a bus, which driver config option will it need?
Perhaps tps65090 FET5? That looks like what the device tree says in
our local tree.
-Doug
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
2014-08-04 15:42 ` Doug Anderson
@ 2014-08-04 17:43 ` Javier Martinez Canillas
-1 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-04 17:43 UTC (permalink / raw)
To: Doug Anderson, Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Tomasz Figa,
Dmitry Torokhov
Hello Doug,
On 08/04/2014 05:42 PM, Doug Anderson wrote:
>
>
>> Both of you mentioned limitations of cros_ec i2c passthrough leading to
>> a forked tps65090 driver downstream - I don't think I can be of help
>> there, as I guess simply copying a driver will not be an option. ;)
>> https://code.google.com/p/chromium/issues/detail?id=391797
>
> Yup, I think this will be real work for someone. I made a quick
> attempt and failed at it and I haven't had time to work on it since
> (and don't necessarily expect to have time in the near future)... I
> think it is possible for anyone versed in i2c to figure this out based
> on what I already posted and what's in our local tree...
>
I posted a series [0] with the remaining cleanups/fixes for cros_ec that are on
the downstream Chrome OS 3.8 kernel. Once these lands it will be easier to add
the missing cros_ec functionality on top. I've these on my TODO list but I was
going to give priority to the cros_ec user-space interface, LPC bus support and
vboot context over the tps65090 Spring support since I don't have access to a
Spring machine to test.
>
>> For the touchpad it seems DT support has landed in the input tree as
>> "atmel,maxtouch". Backporting just that patch does not make it work
>> though. (Tried the rejected pinctrl approach to be on the safe side.)
>> https://code.google.com/p/chromium/issues/detail?id=371114
>> https://patchwork.kernel.org/patch/3976801/
>
> This is the same work as needed for pit and pi, I believe. Perhaps
> Javier or Dmitry has this on their todo list?
>
>
Yes, I've this on my TODO list as well.
Best regards,
Javier
[0]: http://www.spinics.net/lists/linux-samsung-soc/msg34897.html
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-04 17:43 ` Javier Martinez Canillas
0 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-04 17:43 UTC (permalink / raw)
To: linux-arm-kernel
Hello Doug,
On 08/04/2014 05:42 PM, Doug Anderson wrote:
>
>
>> Both of you mentioned limitations of cros_ec i2c passthrough leading to
>> a forked tps65090 driver downstream - I don't think I can be of help
>> there, as I guess simply copying a driver will not be an option. ;)
>> https://code.google.com/p/chromium/issues/detail?id=391797
>
> Yup, I think this will be real work for someone. I made a quick
> attempt and failed at it and I haven't had time to work on it since
> (and don't necessarily expect to have time in the near future)... I
> think it is possible for anyone versed in i2c to figure this out based
> on what I already posted and what's in our local tree...
>
I posted a series [0] with the remaining cleanups/fixes for cros_ec that are on
the downstream Chrome OS 3.8 kernel. Once these lands it will be easier to add
the missing cros_ec functionality on top. I've these on my TODO list but I was
going to give priority to the cros_ec user-space interface, LPC bus support and
vboot context over the tps65090 Spring support since I don't have access to a
Spring machine to test.
>
>> For the touchpad it seems DT support has landed in the input tree as
>> "atmel,maxtouch". Backporting just that patch does not make it work
>> though. (Tried the rejected pinctrl approach to be on the safe side.)
>> https://code.google.com/p/chromium/issues/detail?id=371114
>> https://patchwork.kernel.org/patch/3976801/
>
> This is the same work as needed for pit and pi, I believe. Perhaps
> Javier or Dmitry has this on their todo list?
>
>
Yes, I've this on my TODO list as well.
Best regards,
Javier
[0]: http://www.spinics.net/lists/linux-samsung-soc/msg34897.html
^ permalink raw reply [flat|nested] 98+ messages in thread
* Re: [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
2014-08-04 15:42 ` Doug Anderson
@ 2014-08-07 8:40 ` Javier Martinez Canillas
-1 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-07 8:40 UTC (permalink / raw)
To: Doug Anderson, Andreas Färber
Cc: linux-samsung-soc, linux-arm-kernel, devicetree,
Stephan van Schaik, Vincent Palatin, Tomasz Figa,
Dmitry Torokhov
Hello,
On 08/04/2014 05:42 PM, Doug Anderson wrote:
>
>
>> For the touchpad it seems DT support has landed in the input tree as
>> "atmel,maxtouch". Backporting just that patch does not make it work
>> though. (Tried the rejected pinctrl approach to be on the safe side.)
>> https://code.google.com/p/chromium/issues/detail?id=371114
>> https://patchwork.kernel.org/patch/3976801/
>
> This is the same work as needed for pit and pi, I believe. Perhaps
> Javier or Dmitry has this on their todo list?
>
>
I posted a couple of patches that allowed me to have the atmel touchpad working
on Peach Pit. I found two issues while testing the driver:
a) The device keycode event capabilities are hardcoded in the downstream Chrome
OS driver while the mainline driver expect these to be defined in the DT. The
property is called "linux,gpio-keymap" since it seems that the actual
implementation is using a set of GPIOs. But this is handled by the firmware
since the kernel just read a status register from the atmel T9 object.
I found the property confusing at first since it didn't have anything to do with
Linux GPIO so posted a patch to add an example to the DT binding doc in order to
make it easier to understand [0].
b) The driver overwrites the edge/level flags parsed by OF core and expects that
the IRQ type will be passed using platform data. The downstream Chrome OS driver
defaults the type to IRQF_TRIGGER_FALLING if this is not provided while the
mainline does not have a default so it's just 0 (IRQ_TYPE_NONE).
This is fixed by reading back the IRQ type from the struct irq_data when parsing
the DT data [1].
The DTS changes to make the atmel touchpad work on Peach Pit were posted in [2].
Changes for Pi were included as well since it should be the same but it was not
tested since I don't have access to that machine, testing will be highly
appreciated.
>
> -Doug
>
Thanks a lot and best regards,
Javier
[0]: https://lkml.org/lkml/2014/8/6/584
[1]: https://lkml.org/lkml/2014/8/7/82
[2]: https://lkml.org/lkml/2014/8/6/589
^ permalink raw reply [flat|nested] 98+ messages in thread
* [PATCH v6 00/10] ARM: dts: exynos: Prepare Spring
@ 2014-08-07 8:40 ` Javier Martinez Canillas
0 siblings, 0 replies; 98+ messages in thread
From: Javier Martinez Canillas @ 2014-08-07 8:40 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On 08/04/2014 05:42 PM, Doug Anderson wrote:
>
>
>> For the touchpad it seems DT support has landed in the input tree as
>> "atmel,maxtouch". Backporting just that patch does not make it work
>> though. (Tried the rejected pinctrl approach to be on the safe side.)
>> https://code.google.com/p/chromium/issues/detail?id=371114
>> https://patchwork.kernel.org/patch/3976801/
>
> This is the same work as needed for pit and pi, I believe. Perhaps
> Javier or Dmitry has this on their todo list?
>
>
I posted a couple of patches that allowed me to have the atmel touchpad working
on Peach Pit. I found two issues while testing the driver:
a) The device keycode event capabilities are hardcoded in the downstream Chrome
OS driver while the mainline driver expect these to be defined in the DT. The
property is called "linux,gpio-keymap" since it seems that the actual
implementation is using a set of GPIOs. But this is handled by the firmware
since the kernel just read a status register from the atmel T9 object.
I found the property confusing at first since it didn't have anything to do with
Linux GPIO so posted a patch to add an example to the DT binding doc in order to
make it easier to understand [0].
b) The driver overwrites the edge/level flags parsed by OF core and expects that
the IRQ type will be passed using platform data. The downstream Chrome OS driver
defaults the type to IRQF_TRIGGER_FALLING if this is not provided while the
mainline does not have a default so it's just 0 (IRQ_TYPE_NONE).
This is fixed by reading back the IRQ type from the struct irq_data when parsing
the DT data [1].
The DTS changes to make the atmel touchpad work on Peach Pit were posted in [2].
Changes for Pi were included as well since it should be the same but it was not
tested since I don't have access to that machine, testing will be highly
appreciated.
>
> -Doug
>
Thanks a lot and best regards,
Javier
[0]: https://lkml.org/lkml/2014/8/6/584
[1]: https://lkml.org/lkml/2014/8/7/82
[2]: https://lkml.org/lkml/2014/8/6/589
^ permalink raw reply [flat|nested] 98+ messages in thread