* [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
@ 2024-03-18 10:58 Philip Müller
2024-03-19 4:52 ` Philip Müller
0 siblings, 1 reply; 13+ messages in thread
From: Philip Müller @ 2024-03-18 10:58 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman
[-- Attachment #1: Type: text/plain, Size: 446 bytes --]
I'm currently developing on the OrangePi Neo-01, which ships with two
similar touchpads using the Synaptics driver. On 6.7.10 those two
devices get detected normally. On 6.8.1 it seems to error out.
I either get none, or at best only one of those two devices.
i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
what would be the best way to debug this?
--
Best, Philip
[-- Attachment #2: dmesg-67.log --]
[-- Type: text/x-log, Size: 109458 bytes --]
[ 0.000000] Linux version 6.7.10-1-MANJARO (builduser@fv-az890-580) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Fri Mar 15 21:12:44 UTC 2024
[ 0.000000] Command line: initrd=\amd-ucode.img initrd=\intel-ucode.img initrd=\arkdep\895a5bcae286ddda0d12575e375c82e8669a2abbdd\initramfs-linux.img root="LABEL=manjaro_root" rootflags=subvol=/arkdep/deployments/895a5bcae286ddda0d12575e375c82e8669a2abbdd/rootfs quiet splash rw
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009a7efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009a7f000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a23bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a23c000-0x000000008f7cefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008f7cf000-0x000000009232cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009232d000-0x000000009239ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000923a0000-0x0000000097415fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000097416000-0x000000009affefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009bff8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009bff9000-0x000000009bffcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009bffd000-0x000000009bffefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009bfff000-0x000000009cffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d790000-0x000000009d7effff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d7f5000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000039e2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000039f340000-0x00000004801fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x89a31018-0x89a35257] usable ==> usable
[ 0.000000] e820: update [mem 0x89a31018-0x89a35257] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009a7efff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009a7f000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a23bfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a23c000-0x0000000089a31017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000089a31018-0x0000000089a35257] usable
[ 0.000000] reserve setup_data: [mem 0x0000000089a35258-0x000000008f7cefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008f7cf000-0x000000009232cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009232d000-0x000000009239ffff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000923a0000-0x0000000097415fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000097416000-0x000000009affefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009bff8fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009bff9000-0x000000009bffcfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009bffd000-0x000000009bffefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009bfff000-0x000000009cffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009d790000-0x000000009d7effff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009d7f5000-0x000000009fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000039e2fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000039f340000-0x00000004801fffff] reserved
[ 0.000000] efi: EFI v2.8 by American Megatrends
[ 0.000000] efi: ACPI=0x973fc000 ACPI 2.0=0x973fc014 TPMFinalLog=0x973cb000 SMBIOS=0x9ad7f000 SMBIOS 3.0=0x9ad7e000 MEMATTR=0x8c097298 ESRT=0x8ae46e98 INITRD=0x89a3c518 RNG=0x92343018 TPMEventLog=0x89a36018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem54: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Remove mem55: MMIO range=[0xfd000000-0xfedfffff] (30MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd000000-0xfedfffff] reserved
[ 0.000000] efi: Not removing mem56: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem57: MMIO range=[0xfee01000-0xffffffff] (17MB) from e820 map
[ 0.000000] e820: remove [mem 0xfee01000-0xffffffff] reserved
[ 0.000000] efi: Remove mem59: MMIO range=[0x460000000-0x4801fffff] (514MB) from e820 map
[ 0.000000] e820: remove [mem 0x460000000-0x4801fffff] reserved
[ 0.000000] SMBIOS 3.5.0 present.
[ 0.000000] DMI: OrangePi NEO-01/NEO-01, BIOS 1.06 03/18/2024
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3293.654 MHz processor
[ 0.000133] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000134] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000138] last_pfn = 0x39e300 max_arch_pfn = 0x400000000
[ 0.000143] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.000144] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000375] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000382] last_pfn = 0x9bfff max_arch_pfn = 0x400000000
[ 0.002854] esrt: Reserving ESRT space from 0x000000008ae46e98 to 0x000000008ae46ed0.
[ 0.002859] e820: update [mem 0x8ae46000-0x8ae46fff] usable ==> reserved
[ 0.002868] Using GB pages for direct mapping
[ 0.003046] Secure boot disabled
[ 0.003046] RAMDISK: [mem 0x77885000-0x7f8e0fff]
[ 0.003053] ACPI: Early table checksum verification disabled
[ 0.003056] ACPI: RSDP 0x00000000973FC014 000024 (v02 ALASKA)
[ 0.003059] ACPI: XSDT 0x00000000973FB728 00015C (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003063] ACPI: FACP 0x0000000092395000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.003067] ACPI: DSDT 0x000000009238C000 008D77 (v02 ALASKA A M I 01072009 INTL 20200717)
[ 0.003068] ACPI: FACS 0x00000000933B8000 000040
[ 0.003070] ACPI: SSDT 0x0000000092397000 008416 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.003071] ACPI: SSDT 0x0000000092396000 000221 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.003072] ACPI: FIDT 0x000000009238B000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003073] ACPI: MCFG 0x000000009238A000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.003075] ACPI: HPET 0x0000000092389000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.003076] ACPI: FPDT 0x0000000092388000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003077] ACPI: VFCT 0x0000000092383000 004284 (v01 ALASKA A M I 00000001 AMD 33504F47)
[ 0.003078] ACPI: TPM2 0x0000000092381000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.003079] ACPI: SSDT 0x000000009237B000 00547E (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003081] ACPI: CRAT 0x000000009237A000 000EE8 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003082] ACPI: CDIT 0x0000000092379000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003083] ACPI: SSDT 0x0000000092377000 0015C8 (v02 AMD CPMDFIG2 00000001 INTL 20200717)
[ 0.003084] ACPI: SSDT 0x0000000092374000 002A8F (v02 AMD CDFAAIG2 00000001 INTL 20200717)
[ 0.003085] ACPI: SSDT 0x0000000092372000 0013EC (v02 AMD CPMPMF 00000001 INTL 20200717)
[ 0.003087] ACPI: SSDT 0x0000000092371000 00077A (v02 AMD CPMEC 00000001 INTL 20200717)
[ 0.003088] ACPI: SSDT 0x0000000092370000 00049F (v02 AMD OEMACP 00000001 INTL 20200717)
[ 0.003089] ACPI: SSDT 0x000000009236F000 00063C (v02 AMD OEMPMF 00000001 INTL 20200717)
[ 0.003090] ACPI: SSDT 0x0000000092365000 009821 (v02 AMD CPMCMN 00000001 INTL 20200717)
[ 0.003091] ACPI: WSMT 0x0000000092364000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003093] ACPI: APIC 0x0000000092363000 0000E8 (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.003094] ACPI: IVRS 0x0000000092362000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003095] ACPI: SSDT 0x0000000092361000 000956 (v02 AMD CPMMSOSC 00000001 INTL 20200717)
[ 0.003096] ACPI: SSDT 0x0000000092360000 000EAD (v02 AMD CPMACPV5 00000001 INTL 20200717)
[ 0.003097] ACPI: SSDT 0x000000009235F000 000607 (v02 AMD TOUCHPNL 00000001 INTL 20200717)
[ 0.003099] ACPI: SSDT 0x000000009235E000 000608 (v02 AMD TOUCHPAD 00000001 INTL 20200717)
[ 0.003100] ACPI: SSDT 0x000000009235D000 0007DD (v02 AMD THERMAL0 00000001 INTL 20200717)
[ 0.003101] ACPI: SSDT 0x000000009235C000 000FF7 (v02 AMD GPP_PME_ 00000001 INTL 20200717)
[ 0.003102] ACPI: SSDT 0x0000000092352000 0097E3 (v02 AMD INTGPP03 00000001 INTL 20200717)
[ 0.003103] ACPI: SSDT 0x000000009234D000 004FEB (v02 AMD INTGPP01 00000001 INTL 20200717)
[ 0.003104] ACPI: SSDT 0x000000009234C000 000DEC (v02 AMD CPMGPIO0 00000001 INTL 20200717)
[ 0.003105] ACPI: SSDT 0x000000009234B000 00008D (v02 AMD CPMMSLPI 00000001 INTL 20200717)
[ 0.003107] ACPI: SSDT 0x000000009234A000 000501 (v02 AMD CPMSFAML 00000001 INTL 20200717)
[ 0.003108] ACPI: SSDT 0x0000000092349000 000CE0 (v02 AMD WwanSsdt 00000001 INTL 20200717)
[ 0.003109] ACPI: SSDT 0x0000000092348000 000747 (v02 AMD NVME 00000001 INTL 20200717)
[ 0.003110] ACPI: SSDT 0x0000000092347000 000C81 (v02 AMD GpMsSsdt 00000001 INTL 20200717)
[ 0.003111] ACPI: SSDT 0x0000000092346000 000057 (v02 AMD GPP0 00000001 INTL 20200717)
[ 0.003112] ACPI: SSDT 0x0000000092344000 001673 (v02 AMD UPEP 00000001 INTL 20200717)
[ 0.003114] ACPI: BGRT 0x0000000092382000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003115] ACPI: Reserving FACP table memory at [mem 0x92395000-0x92395113]
[ 0.003115] ACPI: Reserving DSDT table memory at [mem 0x9238c000-0x92394d76]
[ 0.003116] ACPI: Reserving FACS table memory at [mem 0x933b8000-0x933b803f]
[ 0.003116] ACPI: Reserving SSDT table memory at [mem 0x92397000-0x9239f415]
[ 0.003116] ACPI: Reserving SSDT table memory at [mem 0x92396000-0x92396220]
[ 0.003117] ACPI: Reserving FIDT table memory at [mem 0x9238b000-0x9238b09b]
[ 0.003117] ACPI: Reserving MCFG table memory at [mem 0x9238a000-0x9238a03b]
[ 0.003117] ACPI: Reserving HPET table memory at [mem 0x92389000-0x92389037]
[ 0.003117] ACPI: Reserving FPDT table memory at [mem 0x92388000-0x92388043]
[ 0.003118] ACPI: Reserving VFCT table memory at [mem 0x92383000-0x92387283]
[ 0.003118] ACPI: Reserving TPM2 table memory at [mem 0x92381000-0x9238104b]
[ 0.003118] ACPI: Reserving SSDT table memory at [mem 0x9237b000-0x9238047d]
[ 0.003119] ACPI: Reserving CRAT table memory at [mem 0x9237a000-0x9237aee7]
[ 0.003119] ACPI: Reserving CDIT table memory at [mem 0x92379000-0x92379028]
[ 0.003119] ACPI: Reserving SSDT table memory at [mem 0x92377000-0x923785c7]
[ 0.003120] ACPI: Reserving SSDT table memory at [mem 0x92374000-0x92376a8e]
[ 0.003120] ACPI: Reserving SSDT table memory at [mem 0x92372000-0x923733eb]
[ 0.003120] ACPI: Reserving SSDT table memory at [mem 0x92371000-0x92371779]
[ 0.003120] ACPI: Reserving SSDT table memory at [mem 0x92370000-0x9237049e]
[ 0.003121] ACPI: Reserving SSDT table memory at [mem 0x9236f000-0x9236f63b]
[ 0.003121] ACPI: Reserving SSDT table memory at [mem 0x92365000-0x9236e820]
[ 0.003121] ACPI: Reserving WSMT table memory at [mem 0x92364000-0x92364027]
[ 0.003122] ACPI: Reserving APIC table memory at [mem 0x92363000-0x923630e7]
[ 0.003122] ACPI: Reserving IVRS table memory at [mem 0x92362000-0x923621a3]
[ 0.003122] ACPI: Reserving SSDT table memory at [mem 0x92361000-0x92361955]
[ 0.003123] ACPI: Reserving SSDT table memory at [mem 0x92360000-0x92360eac]
[ 0.003123] ACPI: Reserving SSDT table memory at [mem 0x9235f000-0x9235f606]
[ 0.003123] ACPI: Reserving SSDT table memory at [mem 0x9235e000-0x9235e607]
[ 0.003123] ACPI: Reserving SSDT table memory at [mem 0x9235d000-0x9235d7dc]
[ 0.003124] ACPI: Reserving SSDT table memory at [mem 0x9235c000-0x9235cff6]
[ 0.003124] ACPI: Reserving SSDT table memory at [mem 0x92352000-0x9235b7e2]
[ 0.003124] ACPI: Reserving SSDT table memory at [mem 0x9234d000-0x92351fea]
[ 0.003125] ACPI: Reserving SSDT table memory at [mem 0x9234c000-0x9234cdeb]
[ 0.003125] ACPI: Reserving SSDT table memory at [mem 0x9234b000-0x9234b08c]
[ 0.003125] ACPI: Reserving SSDT table memory at [mem 0x9234a000-0x9234a500]
[ 0.003126] ACPI: Reserving SSDT table memory at [mem 0x92349000-0x92349cdf]
[ 0.003126] ACPI: Reserving SSDT table memory at [mem 0x92348000-0x92348746]
[ 0.003126] ACPI: Reserving SSDT table memory at [mem 0x92347000-0x92347c80]
[ 0.003127] ACPI: Reserving SSDT table memory at [mem 0x92346000-0x92346056]
[ 0.003127] ACPI: Reserving SSDT table memory at [mem 0x92344000-0x92345672]
[ 0.003127] ACPI: Reserving BGRT table memory at [mem 0x92382000-0x92382037]
[ 0.003212] No NUMA configuration found
[ 0.003213] Faking a node at [mem 0x0000000000000000-0x000000039e2fffff]
[ 0.003215] NODE_DATA(0) allocated [mem 0x39e2fb000-0x39e2fffff]
[ 0.003232] Zone ranges:
[ 0.003233] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003234] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003234] Normal [mem 0x0000000100000000-0x000000039e2fffff]
[ 0.003235] Device empty
[ 0.003235] Movable zone start for each node
[ 0.003236] Early memory node ranges
[ 0.003236] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.003237] node 0: [mem 0x0000000000100000-0x0000000009a7efff]
[ 0.003238] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.003238] node 0: [mem 0x000000000a23c000-0x000000008f7cefff]
[ 0.003238] node 0: [mem 0x000000009afff000-0x000000009bff8fff]
[ 0.003239] node 0: [mem 0x000000009bffd000-0x000000009bffefff]
[ 0.003239] node 0: [mem 0x0000000100000000-0x000000039e2fffff]
[ 0.003240] Initmem setup node 0 [mem 0x0000000000001000-0x000000039e2fffff]
[ 0.003242] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003253] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.003327] On node 0, zone DMA32: 1409 pages in unavailable ranges
[ 0.004759] On node 0, zone DMA32: 60 pages in unavailable ranges
[ 0.004820] On node 0, zone DMA32: 14384 pages in unavailable ranges
[ 0.004821] On node 0, zone DMA32: 4 pages in unavailable ranges
[ 0.012400] On node 0, zone Normal: 16385 pages in unavailable ranges
[ 0.012425] On node 0, zone Normal: 7424 pages in unavailable ranges
[ 0.012767] ACPI: PM-Timer IO Port: 0x808
[ 0.012774] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.012790] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[ 0.012801] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[ 0.012802] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.012804] ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 1 low edge)
[ 0.012804] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.012807] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.012808] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.012816] e820: update [mem 0x8b07c000-0x8b0ddfff] usable ==> reserved
[ 0.012823] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.012835] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.012836] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.012837] PM: hibernation: Registered nosave memory: [mem 0x09a7f000-0x09ffffff]
[ 0.012838] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a23bfff]
[ 0.012838] PM: hibernation: Registered nosave memory: [mem 0x89a31000-0x89a31fff]
[ 0.012839] PM: hibernation: Registered nosave memory: [mem 0x89a35000-0x89a35fff]
[ 0.012840] PM: hibernation: Registered nosave memory: [mem 0x8ae46000-0x8ae46fff]
[ 0.012841] PM: hibernation: Registered nosave memory: [mem 0x8b07c000-0x8b0ddfff]
[ 0.012841] PM: hibernation: Registered nosave memory: [mem 0x8f7cf000-0x9232cfff]
[ 0.012842] PM: hibernation: Registered nosave memory: [mem 0x9232d000-0x9239ffff]
[ 0.012842] PM: hibernation: Registered nosave memory: [mem 0x923a0000-0x97415fff]
[ 0.012842] PM: hibernation: Registered nosave memory: [mem 0x97416000-0x9affefff]
[ 0.012843] PM: hibernation: Registered nosave memory: [mem 0x9bff9000-0x9bffcfff]
[ 0.012844] PM: hibernation: Registered nosave memory: [mem 0x9bfff000-0x9cffffff]
[ 0.012844] PM: hibernation: Registered nosave memory: [mem 0x9d000000-0x9d78ffff]
[ 0.012844] PM: hibernation: Registered nosave memory: [mem 0x9d790000-0x9d7effff]
[ 0.012844] PM: hibernation: Registered nosave memory: [mem 0x9d7f0000-0x9d7f4fff]
[ 0.012845] PM: hibernation: Registered nosave memory: [mem 0x9d7f5000-0x9fffffff]
[ 0.012845] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xfedfffff]
[ 0.012845] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.012846] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.012847] [mem 0xa0000000-0xfedfffff] available for PCI devices
[ 0.012848] Booting paravirtualized kernel on bare hardware
[ 0.012849] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.015634] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.015891] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[ 0.015894] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[ 0.015895] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.015909] Kernel command line: initrd=\amd-ucode.img initrd=\intel-ucode.img initrd=\arkdep\895a5bcae286ddda0d12575e375c82e8669a2abbdd\initramfs-linux.img root="LABEL=manjaro_root" rootflags=subvol=/arkdep/deployments/895a5bcae286ddda0d12575e375c82e8669a2abbdd/rootfs quiet splash rw
[ 0.015962] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.016809] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.017102] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.017160] Fallback order for Node 0: 0
[ 0.017162] Built 1 zonelists, mobility grouping on. Total pages: 3283065
[ 0.017163] Policy zone: Normal
[ 0.017265] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.017330] software IO TLB: area num 16.
[ 0.032063] Memory: 12815672K/13341364K available (16384K kernel code, 2145K rwdata, 13008K rodata, 3432K init, 3780K bss, 525432K reserved, 0K cma-reserved)
[ 0.032211] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.032228] ftrace: allocating 49082 entries in 192 pages
[ 0.039809] ftrace: allocated 192 pages with 2 groups
[ 0.039865] Dynamic Preempt: full
[ 0.039904] rcu: Preemptible hierarchical RCU implementation.
[ 0.039905] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[ 0.039906] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.039906] Trampoline variant of Tasks RCU enabled.
[ 0.039907] Rude variant of Tasks RCU enabled.
[ 0.039907] Tracing variant of Tasks RCU enabled.
[ 0.039907] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.039908] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.041219] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[ 0.041425] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.041588] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.041617] Console: colour dummy device 80x25
[ 0.041618] printk: legacy console [tty0] enabled
[ 0.041647] ACPI: Core revision 20230628
[ 0.041827] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.041846] APIC: Switch to symmetric I/O mode setup
[ 0.042349] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[ 0.042350] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[ 0.042351] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[ 0.042351] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[ 0.042352] AMD-Vi: Using global IVHD EFR:0x246577efa2254afa, EFR2:0x0
[ 0.043285] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.043293] APIC: Switched APIC routing to: physical flat
[ 0.044686] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058524] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f79e1824ee, max_idle_ns: 440795202126 ns
[ 0.058528] Calibrating delay loop (skipped), value calculated using timer frequency.. 6589.77 BogoMIPS (lpj=10978846)
[ 0.058545] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.058860] LVT offset 1 assigned for vector 0xf9
[ 0.059083] LVT offset 2 assigned for vector 0xf4
[ 0.059130] process: using mwait in idle threads
[ 0.059132] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.059133] Last level dTLB entries: 4KB 3072, 2MB 3072, 4MB 1536, 1GB 0
[ 0.059136] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.059138] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.059139] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.059140] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.059142] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.059143] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.059144] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.059150] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.059151] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.059152] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.059152] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.059153] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.059153] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.059154] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.059154] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.059155] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.059156] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.059157] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.059157] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.059158] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.059158] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16
[ 0.059159] x86/fpu: Enabled xstate features 0xae7, context size is 2456 bytes, using 'compacted' format.
[ 0.076205] Freeing SMP alternatives memory: 40K
[ 0.076207] pid_max: default: 32768 minimum: 301
[ 0.077393] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[ 0.077414] landlock: Up and running.
[ 0.077415] Yama: becoming mindful.
[ 0.077419] LSM support for eBPF active
[ 0.077450] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.077463] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.184508] smpboot: CPU0: AMD Ryzen 7 7840U w/ Radeon 780M Graphics (family: 0x19, model: 0x74, stepping: 0x1)
[ 0.184656] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.184670] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.184683] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.184699] Performance Events: Fam17h+ 16-deep LBR, core perfctr, AMD PMU driver.
[ 0.184720] ... version: 2
[ 0.184721] ... bit width: 48
[ 0.184722] ... generic registers: 6
[ 0.184723] ... value mask: 0000ffffffffffff
[ 0.184724] ... max period: 00007fffffffffff
[ 0.184725] ... fixed-purpose events: 0
[ 0.184725] ... event mask: 000000000000003f
[ 0.184791] signal: max sigframe size: 3376
[ 0.184817] rcu: Hierarchical SRCU implementation.
[ 0.184818] rcu: Max phase no-delay instances is 1000.
[ 0.185192] MCE: In-kernel MCE decoding enabled.
[ 0.185192] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.185192] smp: Bringing up secondary CPUs ...
[ 0.185192] smpboot: x86: Booting SMP configuration:
[ 0.185192] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.201959] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.217193] smp: Brought up 1 node, 16 CPUs
[ 0.217193] smpboot: Max logical packages: 1
[ 0.217193] smpboot: Total of 16 processors activated (105439.46 BogoMIPS)
[ 0.218839] devtmpfs: initialized
[ 0.218839] x86/mm: Memory block size: 128MB
[ 0.221907] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a23bfff] (245760 bytes)
[ 0.221911] ACPI: PM: Registering ACPI NVS region [mem 0x923a0000-0x97415fff] (84369408 bytes)
[ 0.222931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.222943] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.222999] pinctrl core: initialized pinctrl subsystem
[ 0.223134] PM: RTC time: 10:17:21, date: 2024-03-18
[ 0.223414] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.223450] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.223450] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.223450] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.223450] audit: initializing netlink subsys (disabled)
[ 0.223455] audit: type=2000 audit(1710757041.179:1): state=initialized audit_enabled=0 res=1
[ 0.223455] thermal_sys: Registered thermal governor 'fair_share'
[ 0.223455] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.223455] thermal_sys: Registered thermal governor 'step_wise'
[ 0.223455] thermal_sys: Registered thermal governor 'user_space'
[ 0.223455] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.223455] cpuidle: using governor ladder
[ 0.223455] cpuidle: using governor menu
[ 0.223455] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.223455] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.223455] PCI: not using MMCONFIG
[ 0.223455] PCI: Using configuration type 1 for base access
[ 0.223455] PCI: Using configuration type 1 for extended access
[ 0.223455] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.225392] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.225396] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.225400] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.225401] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.226005] ACPI: Added _OSI(Module Device)
[ 0.226006] ACPI: Added _OSI(Processor Device)
[ 0.226007] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.226008] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.244087] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP6.DEV0], AE_NOT_FOUND (20230628/dswload2-162)
[ 0.244093] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
[ 0.244095] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.244643] ACPI: 27 ACPI AML tables successfully acquired and loaded
[ 0.246984] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.262354] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.262354] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.262398] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.263045] ACPI: EC: EC started
[ 0.263045] ACPI: EC: interrupt blocked
[ 0.264315] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.264317] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
[ 0.264319] ACPI: Interpreter enabled
[ 0.264330] ACPI: PM: (supports S0 S4 S5)
[ 0.264331] ACPI: Using IOAPIC for interrupt routing
[ 0.265728] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.265767] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[ 0.265776] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.265777] PCI: Ignoring E820 reservations for host bridge windows
[ 0.266328] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.267389] ACPI: \_SB_.PCI0.GPP2.P0WW: New power resource
[ 0.269945] ACPI: \_SB_.PCI0.GPP8.P0NV: New power resource
[ 0.272323] ACPI: \_SB_.PCI0.GP11.PWRS: New power resource
[ 0.273923] ACPI: \_SB_.PCI0.GP11.SWUS.PWRS: New power resource
[ 0.275634] ACPI: \_SB_.PCI0.GP12.PWRS: New power resource
[ 0.277190] ACPI: \_SB_.PCI0.GP12.SWUS.PWRS: New power resource
[ 0.277444] ACPI: \_SB_.PCI0.GP17.PWRS: New power resource
[ 0.277716] ACPI: \_SB_.PCI0.GP17.VGA_.PWRS: New power resource
[ 0.278041] ACPI: \_SB_.PCI0.GP17.HDAU.PWRS: New power resource
[ 0.278317] ACPI: \_SB_.PCI0.GP17.ACP_.PWRS: New power resource
[ 0.278973] ACPI: \_SB_.PCI0.GP17.AZAL.PWRS: New power resource
[ 0.279646] ACPI: \_SB_.PCI0.GP17.XHC0.PWRS: New power resource
[ 0.282691] ACPI: \_SB_.PCI0.GP17.XHC1.PWRS: New power resource
[ 0.284970] ACPI: \_SB_.PCI0.GP19.XHC2.PWRS: New power resource
[ 0.286566] ACPI: \_SB_.PCI0.GP19.XHC3.PWRS: New power resource
[ 0.288191] ACPI: \_SB_.PCI0.GP19.XHC4.PWRS: New power resource
[ 0.289837] ACPI: \_SB_.PCI0.GP19.NHI0.PWRS: New power resource
[ 0.290771] ACPI: \_SB_.PCI0.GP19.NHI1.PWRS: New power resource
[ 0.300562] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.300567] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.300739] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.301500] PCI host bridge to bus 0000:00
[ 0.301501] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.301503] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.301504] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.301505] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.301506] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.301507] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfcffffff window]
[ 0.301508] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xf9ffffff window]
[ 0.301509] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[ 0.301510] pci_bus 0000:00: root bus resource [mem 0x460000000-0x7fffffffff window]
[ 0.301512] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.301547] pci 0000:00:00.0: [1022:14e8] type 00 class 0x060000
[ 0.301807] pci 0000:00:00.2: [1022:14e9] type 00 class 0x080600
[ 0.302061] pci 0000:00:01.0: [1022:14ea] type 00 class 0x060000
[ 0.302245] pci 0000:00:02.0: [1022:14ea] type 00 class 0x060000
[ 0.302446] pci 0000:00:02.3: [1022:14ee] type 01 class 0x060400
[ 0.302624] pci 0000:00:02.3: enabling Extended Tags
[ 0.302834] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.303244] pci 0000:00:02.4: [1022:14ee] type 01 class 0x060400
[ 0.303422] pci 0000:00:02.4: enabling Extended Tags
[ 0.303630] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.304014] pci 0000:00:03.0: [1022:14ea] type 00 class 0x060000
[ 0.304213] pci 0000:00:03.1: [1022:14ef] type 01 class 0x060400
[ 0.304426] pci 0000:00:03.1: enabling Extended Tags
[ 0.304835] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.306191] pci 0000:00:04.0: [1022:14ea] type 00 class 0x060000
[ 0.306390] pci 0000:00:04.1: [1022:14ef] type 01 class 0x060400
[ 0.306603] pci 0000:00:04.1: enabling Extended Tags
[ 0.307007] pci 0000:00:04.1: PME# supported from D0 D3hot D3cold
[ 0.308347] pci 0000:00:08.0: [1022:14ea] type 00 class 0x060000
[ 0.308517] pci 0000:00:08.1: [1022:14eb] type 01 class 0x060400
[ 0.308545] pci 0000:00:08.1: enabling Extended Tags
[ 0.308587] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.308723] pci 0000:00:08.2: [1022:14eb] type 01 class 0x060400
[ 0.308794] pci 0000:00:08.2: enabling Extended Tags
[ 0.308836] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.308941] pci 0000:00:08.3: [1022:14eb] type 01 class 0x060400
[ 0.308966] pci 0000:00:08.3: enabling Extended Tags
[ 0.309008] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[ 0.309308] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.309435] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.309566] pci 0000:00:18.0: [1022:14f0] type 00 class 0x060000
[ 0.309596] pci 0000:00:18.1: [1022:14f1] type 00 class 0x060000
[ 0.309627] pci 0000:00:18.2: [1022:14f2] type 00 class 0x060000
[ 0.309657] pci 0000:00:18.3: [1022:14f3] type 00 class 0x060000
[ 0.309687] pci 0000:00:18.4: [1022:14f4] type 00 class 0x060000
[ 0.309717] pci 0000:00:18.5: [1022:14f5] type 00 class 0x060000
[ 0.309747] pci 0000:00:18.6: [1022:14f6] type 00 class 0x060000
[ 0.309778] pci 0000:00:18.7: [1022:14f7] type 00 class 0x060000
[ 0.310343] pci 0000:01:00.0: [8086:2725] type 00 class 0x028000
[ 0.310409] pci 0000:01:00.0: reg 0x10: [mem 0xdca00000-0xdca03fff 64bit]
[ 0.310614] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.311744] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.311751] pci 0000:00:02.3: bridge window [mem 0xdca00000-0xdcafffff]
[ 0.311883] pci 0000:02:00.0: [144d:a809] type 00 class 0x010802
[ 0.311902] pci 0000:02:00.0: reg 0x10: [mem 0xdc900000-0xdc903fff 64bit]
[ 0.312256] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.312261] pci 0000:00:02.4: bridge window [mem 0xdc900000-0xdc9fffff]
[ 0.312346] pci 0000:00:03.1: PCI bridge to [bus 03-62]
[ 0.312355] pci 0000:00:03.1: bridge window [io 0xb000-0xefff]
[ 0.312362] pci 0000:00:03.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.312374] pci 0000:00:03.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.312491] pci 0000:00:04.1: PCI bridge to [bus 63-c2]
[ 0.312500] pci 0000:00:04.1: bridge window [io 0x7000-0xafff]
[ 0.312507] pci 0000:00:04.1: bridge window [mem 0xac000000-0xc3ffffff]
[ 0.312519] pci 0000:00:04.1: bridge window [mem 0x5c00000000-0x6bffffffff 64bit pref]
[ 0.312746] pci 0000:c3:00.0: [1002:15bf] type 00 class 0x030000
[ 0.312761] pci 0000:c3:00.0: reg 0x10: [mem 0x7c00000000-0x7c0fffffff 64bit pref]
[ 0.312772] pci 0000:c3:00.0: reg 0x18: [mem 0xdc000000-0xdc1fffff 64bit pref]
[ 0.312780] pci 0000:c3:00.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.312788] pci 0000:c3:00.0: reg 0x24: [mem 0xdc500000-0xdc57ffff]
[ 0.312799] pci 0000:c3:00.0: enabling Extended Tags
[ 0.312816] pci 0000:c3:00.0: BAR 0: assigned to efifb
[ 0.312873] pci 0000:c3:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.313023] pci 0000:c3:00.1: [1002:1640] type 00 class 0x040300
[ 0.313034] pci 0000:c3:00.1: reg 0x10: [mem 0xdc5c8000-0xdc5cbfff]
[ 0.313060] pci 0000:c3:00.1: enabling Extended Tags
[ 0.313101] pci 0000:c3:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.313189] pci 0000:c3:00.2: [1022:15c7] type 00 class 0x108000
[ 0.313207] pci 0000:c3:00.2: reg 0x18: [mem 0xdc400000-0xdc4fffff]
[ 0.313220] pci 0000:c3:00.2: reg 0x24: [mem 0xdc5cc000-0xdc5cdfff]
[ 0.313230] pci 0000:c3:00.2: enabling Extended Tags
[ 0.313358] pci 0000:c3:00.3: [1022:15b9] type 00 class 0x0c0330
[ 0.313373] pci 0000:c3:00.3: reg 0x10: [mem 0xdc300000-0xdc3fffff 64bit]
[ 0.313403] pci 0000:c3:00.3: enabling Extended Tags
[ 0.313446] pci 0000:c3:00.3: PME# supported from D0 D3hot D3cold
[ 0.313543] pci 0000:c3:00.4: [1022:15ba] type 00 class 0x0c0330
[ 0.313558] pci 0000:c3:00.4: reg 0x10: [mem 0xdc200000-0xdc2fffff 64bit]
[ 0.313588] pci 0000:c3:00.4: enabling Extended Tags
[ 0.313631] pci 0000:c3:00.4: PME# supported from D0 D3hot D3cold
[ 0.313724] pci 0000:c3:00.5: [1022:15e2] type 00 class 0x048000
[ 0.313734] pci 0000:c3:00.5: reg 0x10: [mem 0xdc580000-0xdc5bffff]
[ 0.313747] pci 0000:c3:00.5: reg 0x18: [mem 0x7c10000000-0x7c107fffff 64bit pref]
[ 0.313764] pci 0000:c3:00.5: enabling Extended Tags
[ 0.313804] pci 0000:c3:00.5: PME# supported from D0 D3hot D3cold
[ 0.313899] pci 0000:c3:00.6: [1022:15e3] type 00 class 0x040300
[ 0.313910] pci 0000:c3:00.6: reg 0x10: [mem 0xdc5c0000-0xdc5c7fff]
[ 0.313937] pci 0000:c3:00.6: enabling Extended Tags
[ 0.313977] pci 0000:c3:00.6: PME# supported from D0 D3hot D3cold
[ 0.314083] pci 0000:00:08.1: PCI bridge to [bus c3]
[ 0.314088] pci 0000:00:08.1: bridge window [io 0xf000-0xffff]
[ 0.314092] pci 0000:00:08.1: bridge window [mem 0xdc000000-0xdc5fffff]
[ 0.314097] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.314151] pci 0000:c4:00.0: [1022:14ec] type 00 class 0x130000
[ 0.314185] pci 0000:c4:00.0: enabling Extended Tags
[ 0.314236] pci 0000:c4:00.0: PME# supported from D3hot D3cold
[ 0.314341] pci 0000:00:08.2: PCI bridge to [bus c4]
[ 0.314513] pci 0000:c5:00.0: [1022:14ec] type 00 class 0x130000
[ 0.314548] pci 0000:c5:00.0: enabling Extended Tags
[ 0.314708] pci 0000:c5:00.3: [1022:15c0] type 00 class 0x0c0330
[ 0.314723] pci 0000:c5:00.3: reg 0x10: [mem 0xdc700000-0xdc7fffff 64bit]
[ 0.314753] pci 0000:c5:00.3: enabling Extended Tags
[ 0.314796] pci 0000:c5:00.3: PME# supported from D0 D3hot D3cold
[ 0.314887] pci 0000:c5:00.4: [1022:15c1] type 00 class 0x0c0330
[ 0.314901] pci 0000:c5:00.4: reg 0x10: [mem 0xdc600000-0xdc6fffff 64bit]
[ 0.314932] pci 0000:c5:00.4: enabling Extended Tags
[ 0.314974] pci 0000:c5:00.4: PME# supported from D0 D3hot D3cold
[ 0.315269] pci 0000:c5:00.5: [1022:1668] type 00 class 0x0c0340
[ 0.315287] pci 0000:c5:00.5: reg 0x10: [mem 0xdc880000-0xdc8fffff 64bit]
[ 0.315321] pci 0000:c5:00.5: enabling Extended Tags
[ 0.315363] pci 0000:c5:00.5: PME# supported from D0 D3hot D3cold
[ 0.315453] pci 0000:c5:00.6: [1022:1669] type 00 class 0x0c0340
[ 0.315472] pci 0000:c5:00.6: reg 0x10: [mem 0xdc800000-0xdc87ffff 64bit]
[ 0.315505] pci 0000:c5:00.6: enabling Extended Tags
[ 0.315548] pci 0000:c5:00.6: PME# supported from D0 D3hot D3cold
[ 0.315658] pci 0000:00:08.3: PCI bridge to [bus c5]
[ 0.315665] pci 0000:00:08.3: bridge window [mem 0xdc600000-0xdc8fffff]
[ 0.324816] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.324880] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.324936] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.325007] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.325071] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.325123] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.325175] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.325225] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.330136] Low-power S0 idle used by default for system suspend
[ 0.330432] ACPI: EC: interrupt unblocked
[ 0.330433] ACPI: EC: event unblocked
[ 0.330438] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.330439] ACPI: EC: GPE=0xb
[ 0.330440] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
[ 0.330442] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.331907] iommu: Default domain type: Translated
[ 0.331907] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.331994] SCSI subsystem initialized
[ 0.331999] libata version 3.00 loaded.
[ 0.331999] ACPI: bus type USB registered
[ 0.331999] usbcore: registered new interface driver usbfs
[ 0.331999] usbcore: registered new interface driver hub
[ 0.331999] usbcore: registered new device driver usb
[ 0.359450] EDAC MC: Ver: 3.0.0
[ 0.361884] efivars: Registered efivars operations
[ 0.362037] NetLabel: Initializing
[ 0.362038] NetLabel: domain hash size = 128
[ 0.362039] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.362053] NetLabel: unlabeled traffic allowed by default
[ 0.362057] mctp: management component transport protocol core
[ 0.362058] NET: Registered PF_MCTP protocol family
[ 0.362061] PCI: Using ACPI for IRQ routing
[ 0.369586] PCI: pci_cache_line_size set to 64 bytes
[ 0.370585] e820: reserve RAM buffer [mem 0x09a7f000-0x0bffffff]
[ 0.370586] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.370587] e820: reserve RAM buffer [mem 0x89a31018-0x8bffffff]
[ 0.370588] e820: reserve RAM buffer [mem 0x8ae46000-0x8bffffff]
[ 0.370589] e820: reserve RAM buffer [mem 0x8b07c000-0x8bffffff]
[ 0.370590] e820: reserve RAM buffer [mem 0x8f7cf000-0x8fffffff]
[ 0.370590] e820: reserve RAM buffer [mem 0x9bff9000-0x9bffffff]
[ 0.370591] e820: reserve RAM buffer [mem 0x9bfff000-0x9bffffff]
[ 0.370592] e820: reserve RAM buffer [mem 0x39e300000-0x39fffffff]
[ 0.371884] pci 0000:c3:00.0: vgaarb: setting as boot VGA device
[ 0.371884] pci 0000:c3:00.0: vgaarb: bridge control possible
[ 0.371884] pci 0000:c3:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.371884] vgaarb: loaded
[ 0.371903] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.371929] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.375277] clocksource: Switched to clocksource tsc-early
[ 0.375384] VFS: Disk quotas dquot_6.6.0
[ 0.375394] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.375445] pnp: PnP ACPI init
[ 0.375517] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.380929] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.380932] system 00:03: [io 0x040b] has been reserved
[ 0.380933] system 00:03: [io 0x04d6] has been reserved
[ 0.380934] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.380935] system 00:03: [io 0x0c14] has been reserved
[ 0.380936] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.380937] system 00:03: [io 0x0c52] has been reserved
[ 0.380938] system 00:03: [io 0x0c6c] has been reserved
[ 0.380939] system 00:03: [io 0x0c6f] has been reserved
[ 0.380940] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.380941] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.380942] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.380943] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.380944] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.380945] system 00:03: [io 0x0800-0x089f] has been reserved
[ 0.380947] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.380948] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.380949] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.380950] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.380951] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.380952] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.380954] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.380956] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.380957] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.380958] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.380959] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[ 0.382526] pnp: PnP ACPI: found 4 devices
[ 0.388514] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.388667] NET: Registered PF_INET protocol family
[ 0.388816] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.391403] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.391422] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.391466] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.391600] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.391658] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.391719] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.391743] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.391765] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.391803] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.391807] NET: Registered PF_XDP protocol family
[ 0.391815] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.391842] pci 0000:00:02.3: bridge window [mem 0xdca00000-0xdcafffff]
[ 0.391858] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.391872] pci 0000:00:02.4: bridge window [mem 0xdc900000-0xdc9fffff]
[ 0.391889] pci 0000:00:03.1: PCI bridge to [bus 03-62]
[ 0.391891] pci 0000:00:03.1: bridge window [io 0xb000-0xefff]
[ 0.391922] pci 0000:00:03.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.391946] pci 0000:00:03.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.391994] pci 0000:00:04.1: PCI bridge to [bus 63-c2]
[ 0.391996] pci 0000:00:04.1: bridge window [io 0x7000-0xafff]
[ 0.392027] pci 0000:00:04.1: bridge window [mem 0xac000000-0xc3ffffff]
[ 0.392051] pci 0000:00:04.1: bridge window [mem 0x5c00000000-0x6bffffffff 64bit pref]
[ 0.392099] pci 0000:00:08.1: PCI bridge to [bus c3]
[ 0.392100] pci 0000:00:08.1: bridge window [io 0xf000-0xffff]
[ 0.392106] pci 0000:00:08.1: bridge window [mem 0xdc000000-0xdc5fffff]
[ 0.392110] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.392115] pci 0000:00:08.2: PCI bridge to [bus c4]
[ 0.392123] pci 0000:00:08.3: PCI bridge to [bus c5]
[ 0.392127] pci 0000:00:08.3: bridge window [mem 0xdc600000-0xdc8fffff]
[ 0.392134] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.392135] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.392136] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.392137] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.392138] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.392139] pci_bus 0000:00: resource 9 [mem 0xfa000000-0xfcffffff window]
[ 0.392140] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xf9ffffff window]
[ 0.392141] pci_bus 0000:00: resource 11 [mem 0xa0000000-0xdfffffff window]
[ 0.392142] pci_bus 0000:00: resource 12 [mem 0x460000000-0x7fffffffff window]
[ 0.392143] pci_bus 0000:01: resource 1 [mem 0xdca00000-0xdcafffff]
[ 0.392145] pci_bus 0000:02: resource 1 [mem 0xdc900000-0xdc9fffff]
[ 0.392146] pci_bus 0000:03: resource 0 [io 0xb000-0xefff]
[ 0.392147] pci_bus 0000:03: resource 1 [mem 0xc4000000-0xdbffffff]
[ 0.392148] pci_bus 0000:03: resource 2 [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.392149] pci_bus 0000:63: resource 0 [io 0x7000-0xafff]
[ 0.392150] pci_bus 0000:63: resource 1 [mem 0xac000000-0xc3ffffff]
[ 0.392151] pci_bus 0000:63: resource 2 [mem 0x5c00000000-0x6bffffffff 64bit pref]
[ 0.392152] pci_bus 0000:c3: resource 0 [io 0xf000-0xffff]
[ 0.392153] pci_bus 0000:c3: resource 1 [mem 0xdc000000-0xdc5fffff]
[ 0.392154] pci_bus 0000:c3: resource 2 [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.392155] pci_bus 0000:c5: resource 1 [mem 0xdc600000-0xdc8fffff]
[ 0.392781] pci 0000:c3:00.1: D0 power state depends on 0000:c3:00.0
[ 0.392846] pci 0000:00:08.1: can't derive routing for PCI INT A
[ 0.392847] pci 0000:00:08.1: PCI INT A: not connected
[ 0.393153] pci 0000:00:08.3: can't derive routing for PCI INT A
[ 0.393154] pci 0000:00:08.3: PCI INT A: not connected
[ 0.393378] PCI: CLS 64 bytes, default 64
[ 0.393392] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.393434] pci 0000:00:01.0: Adding to iommu group 0
[ 0.393448] Trying to unpack rootfs image as initramfs...
[ 0.393465] pci 0000:00:02.0: Adding to iommu group 1
[ 0.393484] pci 0000:00:02.3: Adding to iommu group 2
[ 0.393505] pci 0000:00:02.4: Adding to iommu group 3
[ 0.393525] pci 0000:00:03.0: Adding to iommu group 4
[ 0.393536] pci 0000:00:03.1: Adding to iommu group 4
[ 0.393558] pci 0000:00:04.0: Adding to iommu group 5
[ 0.393568] pci 0000:00:04.1: Adding to iommu group 5
[ 0.393604] pci 0000:00:08.0: Adding to iommu group 6
[ 0.393620] pci 0000:00:08.1: Adding to iommu group 7
[ 0.393637] pci 0000:00:08.2: Adding to iommu group 8
[ 0.393654] pci 0000:00:08.3: Adding to iommu group 9
[ 0.393676] pci 0000:00:14.0: Adding to iommu group 10
[ 0.393687] pci 0000:00:14.3: Adding to iommu group 10
[ 0.393739] pci 0000:00:18.0: Adding to iommu group 11
[ 0.393750] pci 0000:00:18.1: Adding to iommu group 11
[ 0.393761] pci 0000:00:18.2: Adding to iommu group 11
[ 0.393772] pci 0000:00:18.3: Adding to iommu group 11
[ 0.393784] pci 0000:00:18.4: Adding to iommu group 11
[ 0.393797] pci 0000:00:18.5: Adding to iommu group 11
[ 0.393808] pci 0000:00:18.6: Adding to iommu group 11
[ 0.393819] pci 0000:00:18.7: Adding to iommu group 11
[ 0.393854] pci 0000:01:00.0: Adding to iommu group 12
[ 0.393873] pci 0000:02:00.0: Adding to iommu group 13
[ 0.393907] pci 0000:c3:00.0: Adding to iommu group 14
[ 0.393929] pci 0000:c3:00.1: Adding to iommu group 15
[ 0.393952] pci 0000:c3:00.2: Adding to iommu group 16
[ 0.393975] pci 0000:c3:00.3: Adding to iommu group 17
[ 0.393998] pci 0000:c3:00.4: Adding to iommu group 18
[ 0.394021] pci 0000:c3:00.5: Adding to iommu group 19
[ 0.394043] pci 0000:c3:00.6: Adding to iommu group 20
[ 0.394057] pci 0000:c4:00.0: Adding to iommu group 21
[ 0.394082] pci 0000:c5:00.0: Adding to iommu group 22
[ 0.394107] pci 0000:c5:00.3: Adding to iommu group 23
[ 0.394129] pci 0000:c5:00.4: Adding to iommu group 24
[ 0.394151] pci 0000:c5:00.5: Adding to iommu group 25
[ 0.394174] pci 0000:c5:00.6: Adding to iommu group 26
[ 0.397170] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.397172] pci 0000:00:00.2: PCI INT A: not connected
[ 0.397321] AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
[ 0.397328] AMD-Vi: Interrupt remapping enabled
[ 0.397512] AMD-Vi: Virtual APIC enabled
[ 0.397596] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.397616] software IO TLB: mapped [mem 0x0000000085a31000-0x0000000089a31000] (64MB)
[ 0.397672] LVT offset 0 assigned for vector 0x400
[ 0.400103] perf: AMD IBS detected (0x00000bff)
[ 0.400111] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.402451] Initialise system trusted keyrings
[ 0.402460] Key type blacklist registered
[ 0.402493] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.402499] zbud: loaded
[ 0.402626] integrity: Platform Keyring initialized
[ 0.402628] integrity: Machine keyring initialized
[ 0.410250] Key type asymmetric registered
[ 0.410252] Asymmetric key parser 'x509' registered
[ 0.410267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.410320] io scheduler mq-deadline registered
[ 0.410321] io scheduler kyber registered
[ 0.410329] io scheduler bfq registered
[ 0.412206] pcieport 0000:00:02.3: PME: Signaling with IRQ 38
[ 0.412629] pcieport 0000:00:02.4: PME: Signaling with IRQ 39
[ 0.413099] pcieport 0000:00:03.1: PME: Signaling with IRQ 40
[ 0.413232] pcieport 0000:00:03.1: AER: enabled with IRQ 40
[ 0.413260] pcieport 0000:00:03.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.414032] pcieport 0000:00:04.1: PME: Signaling with IRQ 41
[ 0.414163] pcieport 0000:00:04.1: AER: enabled with IRQ 41
[ 0.414207] pcieport 0000:00:04.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.414825] pcieport 0000:00:08.1: PME: Signaling with IRQ 42
[ 0.414923] pcieport 0000:00:08.2: can't derive routing for PCI INT A
[ 0.414924] pcieport 0000:00:08.2: PCI INT A: not connected
[ 0.415067] pcieport 0000:00:08.2: PME: Signaling with IRQ 43
[ 0.415251] pcieport 0000:00:08.3: PME: Signaling with IRQ 44
[ 0.415355] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.416868] ACPI: AC: AC Adapter [ACAD] (on-line)
[ 0.416916] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.416932] ACPI: button: Power Button [PWRB]
[ 0.417010] Estimated ratio of average max frequency by base frequency (times 1024): 1548
[ 0.417026] Monitor-Mwait will be used to enter C-1 state
[ 0.417032] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[ 0.417136] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[ 0.417270] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[ 0.417394] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[ 0.417529] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[ 0.417659] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[ 0.417787] ACPI: \_SB_.PLTF.C00C: Found 3 idle states
[ 0.417911] ACPI: \_SB_.PLTF.C00E: Found 3 idle states
[ 0.417994] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[ 0.418116] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[ 0.418247] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[ 0.418366] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[ 0.418486] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[ 0.418609] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[ 0.418739] ACPI: \_SB_.PLTF.C00D: Found 3 idle states
[ 0.418861] ACPI: \_SB_.PLTF.C00F: Found 3 idle states
[ 0.419179] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.419180] ACPI: thermal: Thermal Zone [TZ01] (20 C)
[ 0.419321] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.419592] ACPI: battery: Slot [BAT0] (battery absent)
[ 0.421098] Non-volatile memory driver v1.3
[ 0.421100] Linux agpgart interface v0.103
[ 0.462349] tpm_crb MSFT0101:00: Disabling hwrng
[ 0.462946] ACPI: bus type drm_connector registered
[ 0.465364] usbcore: registered new interface driver usbserial_generic
[ 0.465369] usbserial: USB Serial support registered for generic
[ 0.465449] rtc_cmos 00:01: RTC can wake from S4
[ 0.465770] rtc_cmos 00:01: registered as rtc0
[ 0.465801] rtc_cmos 00:01: setting system clock to 2024-03-18T10:17:21 UTC (1710757041)
[ 0.465825] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 0.467278] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.467544] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.468112] fbcon: Deferring console take-over
[ 0.468113] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.468152] hid: raw HID events driver (C) Jiri Kosina
[ 0.468280] drop_monitor: Initializing network drop monitor service
[ 0.477223] NET: Registered PF_INET6 protocol family
[ 0.592511] Freeing initrd memory: 131440K
[ 0.599621] Segment Routing with IPv6
[ 0.599624] RPL Segment Routing with IPv6
[ 0.599646] In-situ OAM (IOAM) with IPv6
[ 0.599695] NET: Registered PF_PACKET protocol family
[ 0.601855] microcode: Current revision: 0x0a704104
[ 0.602955] resctrl: L3 allocation detected
[ 0.602956] resctrl: MB allocation detected
[ 0.602957] resctrl: SMBA allocation detected
[ 0.602957] resctrl: L3 monitoring detected
[ 0.602981] IPI shorthand broadcast: enabled
[ 0.604429] sched_clock: Marking stable (602547354, 402168)->(605715550, -2766028)
[ 0.604621] registered taskstats version 1
[ 0.605397] Loading compiled-in X.509 certificates
[ 0.607061] Loaded X.509 cert 'Build time autogenerated kernel key: ee274ce99a71acb77c3b6b0eda48adf414068a72'
[ 0.609111] zswap: loaded using pool zstd/zsmalloc
[ 0.610767] Key type .fscrypt registered
[ 0.610768] Key type fscrypt-provisioning registered
[ 0.611531] PM: Magic number: 0:114:275
[ 0.611539] misc udmabuf: hash matches
[ 0.611577] tty tty12: hash matches
[ 0.611583] edac mc: hash matches
[ 0.614940] RAS: Correctable Errors collector initialized.
[ 0.616145] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP6.DEV0], AE_NOT_FOUND (20230628/psargs-330)
[ 0.616153] ACPI Error: Aborting method \_SB.GPIO._EVT due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[ 0.616159] clk: Disabling unused clocks
[ 0.617047] Freeing unused decrypted memory: 2028K
[ 0.617342] Freeing unused kernel image (initmem) memory: 3432K
[ 0.645413] Write protecting the kernel read-only data: 30720k
[ 0.646223] Freeing unused kernel image (rodata/data gap) memory: 1328K
[ 0.675983] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.675988] rodata_test: all tests were successful
[ 0.675994] Run /init as init process
[ 0.675995] with arguments:
[ 0.675996] /init
[ 0.675997] splash
[ 0.675998] with environment:
[ 0.675998] HOME=/
[ 0.675999] TERM=linux
[ 0.683910] systemd[1]: systemd 255.4-2-manjaro running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 0.683919] systemd[1]: Detected architecture x86-64.
[ 0.683922] systemd[1]: Running in initrd.
[ 0.684142] systemd[1]: Initializing machine ID from random generator.
[ 0.747326] systemd[1]: Queued start job for default target Initrd Default Target.
[ 0.768413] systemd[1]: Expecting device /dev/disk/by-label/manjaro_root...
[ 0.768480] systemd[1]: Reached target Initrd /usr File System.
[ 0.768499] systemd[1]: Reached target Slice Units.
[ 0.768507] systemd[1]: Reached target Swaps.
[ 0.768515] systemd[1]: Reached target Timer Units.
[ 0.768604] systemd[1]: Listening on Journal Socket (/dev/log).
[ 0.768661] systemd[1]: Listening on Journal Socket.
[ 0.768726] systemd[1]: Listening on udev Control Socket.
[ 0.768768] systemd[1]: Listening on udev Kernel Socket.
[ 0.768774] systemd[1]: Reached target Socket Units.
[ 0.769485] systemd[1]: Starting Create List of Static Device Nodes...
[ 0.770427] systemd[1]: Starting Journal Service...
[ 0.770882] systemd[1]: Starting Load Kernel Modules...
[ 0.771261] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 0.771634] systemd[1]: Starting Virtual Console Setup...
[ 0.774229] systemd[1]: Finished Create List of Static Device Nodes.
[ 0.778839] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 0.778982] systemd[1]: Reached target Preparation for Local File Systems.
[ 0.779001] systemd[1]: Reached target Local File Systems.
[ 0.780708] systemd-journald[228]: Collecting audit messages is disabled.
[ 0.781510] i2c_dev: i2c /dev entries driver
[ 0.781774] acpi_call: loading out-of-tree module taints kernel.
[ 0.781776] acpi_call: module verification failed: signature and/or required key missing - tainting kernel
[ 0.784946] systemd[1]: Finished Load Kernel Modules.
[ 0.785562] systemd[1]: Starting Apply Kernel Variables...
[ 0.786631] systemd[1]: Finished Virtual Console Setup.
[ 0.787143] systemd[1]: Starting dracut ask for additional cmdline parameters...
[ 0.791788] systemd[1]: Finished Apply Kernel Variables.
[ 0.802451] systemd[1]: Started Journal Service.
[ 0.919871] raid6: skipped pq benchmark and selected avx512x4
[ 0.919875] raid6: using avx512x2 recovery algorithm
[ 0.921972] xor: automatically using best checksumming function avx
[ 0.979422] Btrfs loaded, zoned=yes, fsverity=yes
[ 1.185163] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 1.185793] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 1.185896] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 1.186000] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.186436] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:00/input/input1
[ 1.186488] ccp 0000:c3:00.2: enabling device (0000 -> 0002)
[ 1.187972] ccp 0000:c3:00.2: tee enabled
[ 1.188359] ccp 0000:c3:00.2: psp enabled
[ 1.194464] cryptd: max_cpu_qlen set to 1000
[ 1.341540] input: FTCS1000:00 2808:8206 Touchscreen as /devices/platform/AMDI0010:01/i2c-1/i2c-FTCS1000:00/0018:2808:8206.0001/input/input2
[ 1.341652] input: FTCS1000:00 2808:8206 Stylus as /devices/platform/AMDI0010:01/i2c-1/i2c-FTCS1000:00/0018:2808:8206.0001/input/input4
[ 1.341711] hid-generic 0018:2808:8206.0001: input,hidraw0: I2C HID v1.00 Device [FTCS1000:00 2808:8206] on i2c-FTCS1000:00
[ 1.400820] tsc: Refined TSC clocksource calibration: 3293.851 MHz
[ 1.400846] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f7a9b847a7, max_idle_ns: 440795300239 ns
[ 1.400927] clocksource: Switched to clocksource tsc
[ 1.436025] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0002/input/input5
[ 1.436029] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.0003/input/input6
[ 1.436221] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0002/input/input7
[ 1.436367] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.0003/input/input8
[ 1.436601] hid-generic 0018:0911:5288.0002: input,hidraw1: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 1.436703] hid-generic 0018:0911:5288.0003: input,hidraw2: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 1.439903] xhci_hcd 0000:c3:00.3: xHCI Host Controller
[ 1.439910] xhci_hcd 0000:c3:00.3: new USB bus registered, assigned bus number 1
[ 1.440371] xhci_hcd 0000:c3:00.3: hcc params 0x0128ffc5 hci version 0x120 quirks 0x0000000200000410
[ 1.440790] xhci_hcd 0000:c3:00.3: xHCI Host Controller
[ 1.440795] xhci_hcd 0000:c3:00.3: new USB bus registered, assigned bus number 2
[ 1.440798] xhci_hcd 0000:c3:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.440849] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 1.440852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.440854] usb usb1: Product: xHCI Host Controller
[ 1.440856] usb usb1: Manufacturer: Linux 6.7.10-1-MANJARO xhci-hcd
[ 1.440857] usb usb1: SerialNumber: 0000:c3:00.3
[ 1.441091] hub 1-0:1.0: USB hub found
[ 1.441106] hub 1-0:1.0: 5 ports detected
[ 1.442115] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.442119] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.442555] bmi260_i2c i2c-BMI0260:00: supply vdd not found, using dummy regulator
[ 1.442593] bmi260_i2c i2c-BMI0260:00: supply vddio not found, using dummy regulator
[ 1.442819] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.446584] AVX2 version of gcm_enc/dec engaged.
[ 1.446748] AES CTR mode by8 optimization enabled
[ 1.447533] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.447564] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 1.447567] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.447568] usb usb2: Product: xHCI Host Controller
[ 1.447570] usb usb2: Manufacturer: Linux 6.7.10-1-MANJARO xhci-hcd
[ 1.447571] usb usb2: SerialNumber: 0000:c3:00.3
[ 1.447659] hub 2-0:1.0: USB hub found
[ 1.447675] hub 2-0:1.0: 2 ports detected
[ 1.449821] xhci_hcd 0000:c3:00.4: xHCI Host Controller
[ 1.449825] xhci_hcd 0000:c3:00.4: new USB bus registered, assigned bus number 3
[ 1.450265] xhci_hcd 0000:c3:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
[ 1.450728] xhci_hcd 0000:c3:00.4: xHCI Host Controller
[ 1.450731] xhci_hcd 0000:c3:00.4: new USB bus registered, assigned bus number 4
[ 1.450733] xhci_hcd 0000:c3:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.450767] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 1.450769] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450770] usb usb3: Product: xHCI Host Controller
[ 1.450772] usb usb3: Manufacturer: Linux 6.7.10-1-MANJARO xhci-hcd
[ 1.450773] usb usb3: SerialNumber: 0000:c3:00.4
[ 1.450870] hub 3-0:1.0: USB hub found
[ 1.450881] hub 3-0:1.0: 1 port detected
[ 1.451010] nvme 0000:02:00.0: platform quirk: setting simple suspend
[ 1.451112] nvme nvme0: pci function 0000:02:00.0
[ 1.451997] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.452020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 1.452022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452023] usb usb4: Product: xHCI Host Controller
[ 1.452025] usb usb4: Manufacturer: Linux 6.7.10-1-MANJARO xhci-hcd
[ 1.452026] usb usb4: SerialNumber: 0000:c3:00.4
[ 1.452114] hub 4-0:1.0: USB hub found
[ 1.452124] hub 4-0:1.0: 1 port detected
[ 1.453259] xhci_hcd 0000:c5:00.3: xHCI Host Controller
[ 1.453267] xhci_hcd 0000:c5:00.3: new USB bus registered, assigned bus number 5
[ 1.453593] xhci_hcd 0000:c5:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
[ 1.454242] xhci_hcd 0000:c5:00.3: xHCI Host Controller
[ 1.454245] xhci_hcd 0000:c5:00.3: new USB bus registered, assigned bus number 6
[ 1.454248] xhci_hcd 0000:c5:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.454287] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 1.454289] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.454291] usb usb5: Product: xHCI Host Controller
[ 1.454292] usb usb5: Manufacturer: Linux 6.7.10-1-MANJARO xhci-hcd
[ 1.454293] usb usb5: SerialNumber: 0000:c5:00.3
[ 1.454386] hub 5-0:1.0: USB hub found
[ 1.454405] hub 5-0:1.0: 1 port detected
[ 1.455389] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.455409] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 1.455411] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.455412] usb usb6: Product: xHCI Host Controller
[ 1.455414] usb usb6: Manufacturer: Linux 6.7.10-1-MANJARO xhci-hcd
[ 1.455415] usb usb6: SerialNumber: 0000:c5:00.3
[ 1.455511] hub 6-0:1.0: USB hub found
[ 1.455528] hub 6-0:1.0: 1 port detected
[ 1.456017] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input9
[ 1.456902] xhci_hcd 0000:c5:00.4: xHCI Host Controller
[ 1.456906] xhci_hcd 0000:c5:00.4: new USB bus registered, assigned bus number 7
[ 1.457259] xhci_hcd 0000:c5:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
[ 1.457708] xhci_hcd 0000:c5:00.4: xHCI Host Controller
[ 1.457711] xhci_hcd 0000:c5:00.4: new USB bus registered, assigned bus number 8
[ 1.457713] xhci_hcd 0000:c5:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.457742] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 1.457744] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.457745] usb usb7: Product: xHCI Host Controller
[ 1.457746] usb usb7: Manufacturer: Linux 6.7.10-1-MANJARO xhci-hcd
[ 1.457747] usb usb7: SerialNumber: 0000:c5:00.4
[ 1.457829] hub 7-0:1.0: USB hub found
[ 1.457839] hub 7-0:1.0: 1 port detected
[ 1.458712] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.458730] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 1.458732] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.458733] usb usb8: Product: xHCI Host Controller
[ 1.458734] usb usb8: Manufacturer: Linux 6.7.10-1-MANJARO xhci-hcd
[ 1.458734] usb usb8: SerialNumber: 0000:c5:00.4
[ 1.458802] hub 8-0:1.0: USB hub found
[ 1.458821] hub 8-0:1.0: 1 port detected
[ 1.465534] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.488361] nvme nvme0: allocated 64 MiB host memory buffer.
[ 1.536441] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.545909] nvme0n1: p1 p2 p3 p4
[ 1.674572] i2c_hid_acpi i2c-FTCS1000:00: device returned incorrect report (8 vs 12 expected)
[ 1.674578] hid-multitouch 0018:2808:8206.0001: failed to fetch feature 12
[ 1.674715] input: FTCS1000:00 2808:8206 as /devices/platform/AMDI0010:01/i2c-1/i2c-FTCS1000:00/0018:2808:8206.0001/input/input10
[ 1.674780] input: FTCS1000:00 2808:8206 Stylus as /devices/platform/AMDI0010:01/i2c-1/i2c-FTCS1000:00/0018:2808:8206.0001/input/input12
[ 1.674824] hid-multitouch 0018:2808:8206.0001: input,hidraw0: I2C HID v1.00 Device [FTCS1000:00 2808:8206] on i2c-FTCS1000:00
[ 1.697137] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 1.703823] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 1.849061] usb 5-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56
[ 1.849066] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.849069] usb 5-1: Product: USB2.1 Hub
[ 1.849071] usb 5-1: Manufacturer: GenesysLogic
[ 1.864889] usb 1-4: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00
[ 1.864897] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.903385] hub 5-1:1.0: USB hub found
[ 1.903950] hub 5-1:1.0: 4 ports detected
[ 1.943014] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0002/input/input13
[ 1.943104] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0002/input/input14
[ 1.943187] hid-multitouch 0018:0911:5288.0002: input,hidraw1: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 1.967257] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.970654] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.987037] usb 6-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56
[ 1.987044] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.987048] usb 6-1: Product: USB3.1 Hub
[ 1.987051] usb 6-1: Manufacturer: GenesysLogic
[ 1.993155] usb 2-1: New USB device found, idVendor=05e3, idProduct=0764, bcdDevice=29.07
[ 1.993159] usb 2-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 1.993161] usb 2-1: Product: USB Storage
[ 1.993163] usb 2-1: Manufacturer: Generic
[ 1.993165] usb 2-1: SerialNumber: 000000002907
[ 2.015616] hub 6-1:1.0: USB hub found
[ 2.015931] hub 6-1:1.0: 4 ports detected
[ 2.113765] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 2.210443] usb 5-1.1: new low-speed USB device number 3 using xhci_hcd
[ 2.279876] usb 1-5: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10
[ 2.279883] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.279887] usb 1-5: Product: USB Controller
[ 2.279889] usb 1-5: Manufacturer:
[ 2.279892] usb 1-5: SerialNumber: 32869681
[ 2.341277] usb 5-1.1: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 3.30
[ 2.341284] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.341288] usb 5-1.1: Product: USB Keyboard
[ 2.341290] usb 5-1.1: Manufacturer: SIGMACHIP
[ 2.419626] usb 6-1.4: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.466356] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.0003/input/input15
[ 2.466453] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.0003/input/input16
[ 2.466532] hid-multitouch 0018:0911:5288.0003: input,hidraw2: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 2.590503] usb 5-1.2: new high-speed USB device number 4 using xhci_hcd
[ 2.630682] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 2.630871] scsi host0: usb-storage 2-1:1.0
[ 2.631100] usbcore: registered new interface driver usb-storage
[ 2.634339] usbcore: registered new interface driver uas
[ 2.636760] [drm] amdgpu kernel modesetting enabled.
[ 2.638001] input: USB Controller as /devices/pci0000:00/0000:00:08.1/0000:c3:00.3/usb1/1-5/1-5:1.1/0003:045E:028E.0004/input/input17
[ 2.647778] amdgpu: Virtual CRAT table created for CPU
[ 2.647791] amdgpu: Topology: Add CPU node
[ 2.647916] amdgpu 0000:c3:00.0: enabling device (0006 -> 0007)
[ 2.647963] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0x1002:0x15BF 0xC9).
[ 2.648490] [drm] register mmio base: 0xDC500000
[ 2.648492] [drm] register mmio size: 524288
[ 2.652504] [drm] add ip block number 0 <soc21_common>
[ 2.652507] [drm] add ip block number 1 <gmc_v11_0>
[ 2.652508] [drm] add ip block number 2 <ih_v6_0>
[ 2.652510] [drm] add ip block number 3 <psp>
[ 2.652511] [drm] add ip block number 4 <smu>
[ 2.652514] [drm] add ip block number 5 <dm>
[ 2.652515] [drm] add ip block number 6 <gfx_v11_0>
[ 2.652518] [drm] add ip block number 7 <sdma_v6_0>
[ 2.652519] [drm] add ip block number 8 <vcn_v4_0>
[ 2.652521] [drm] add ip block number 9 <jpeg_v4_0>
[ 2.652522] [drm] add ip block number 10 <mes_v11_0>
[ 2.652546] amdgpu 0000:c3:00.0: amdgpu: Fetched VBIOS from VFCT
[ 2.652549] amdgpu: ATOM BIOS: 113-PHXGENERIC-001
[ 2.653961] [drm] VCN(0) encode/decode are enabled in VM mode
[ 2.654261] amdgpu 0000:c3:00.0: [drm:jpeg_v4_0_early_init [amdgpu]] JPEG decode is enabled in VM mode
[ 2.694372] hid-generic 0003:045E:028E.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Controller] on usb-0000:c3:00.3-5/input1
[ 2.694458] usb 6-1.4: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
[ 2.694464] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.694468] usb 6-1.4: Product: AX88179A
[ 2.694470] usb 6-1.4: Manufacturer: ASIX
[ 2.694472] usb 6-1.4: SerialNumber: 006B8A5F
[ 2.699999] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:08.3/0000:c5:00.3/usb5/5-1/5-1.1/5-1.1:1.0/0003:1C4F:0002.0005/input/input18
[ 2.718133] amdgpu 0000:c3:00.0: vgaarb: deactivate vga console
[ 2.718143] amdgpu 0000:c3:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[ 2.718212] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 2.718239] amdgpu 0000:c3:00.0: amdgpu: VRAM: 3072M 0x0000008000000000 - 0x00000080BFFFFFFF (3072M used)
[ 2.718245] amdgpu 0000:c3:00.0: amdgpu: GART: 512M 0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[ 2.718262] [drm] Detected VRAM RAM=3072M, BAR=3072M
[ 2.718265] [drm] RAM width 128bits LPDDR5
[ 2.718575] [drm] amdgpu: 3072M of VRAM memory ready
[ 2.718578] [drm] amdgpu: 6344M of GTT memory ready.
[ 2.718602] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.719060] [drm] PCIE GART of 512M enabled (table at 0x0000008000900000).
[ 2.719536] [drm] Loading DMUB firmware via PSP: version=0x08003300
[ 2.719914] [drm] Found VCN firmware Version ENC: 1.19 DEC: 7 VEP: 0 Revision: 0
[ 2.719919] amdgpu 0000:c3:00.0: amdgpu: Will use PSP to load VCN firmware
[ 2.744986] [drm] reserve 0x4a00000 from 0x80b0000000 for PSP TMR
[ 2.754117] hid-generic 0003:1C4F:0002.0005: input,hidraw4: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:c5:00.3-1.1/input0
[ 2.759740] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.3/0000:c5:00.3/usb5/5-1/5-1.1/5-1.1:1.1/0003:1C4F:0002.0006/input/input19
[ 2.813994] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:08.3/0000:c5:00.3/usb5/5-1/5-1.1/5-1.1:1.1/0003:1C4F:0002.0006/input/input20
[ 2.814117] hid-generic 0003:1C4F:0002.0006: input,hidraw5: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:c5:00.3-1.1/input1
[ 2.814184] usbcore: registered new interface driver usbhid
[ 2.814188] usbhid: USB HID core driver
[ 3.296452] amdgpu 0000:c3:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 3.304580] amdgpu 0000:c3:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 3.304583] amdgpu 0000:c3:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 3.328841] amdgpu 0000:c3:00.0: amdgpu: SMU is initialized successfully!
[ 3.328846] [drm] Seamless boot condition check passed
[ 3.329786] [drm] Display Core v3.2.259 initialized on DCN 3.1.4
[ 3.329788] [drm] DP-HDMI FRL PCON supported
[ 3.331914] [drm] DMUB hardware initialized: version=0x08003300
[ 3.358531] usb 6-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[ 3.381739] usb 6-1.2: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01
[ 3.381748] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.381752] usb 6-1.2: Product: RTL9210
[ 3.381755] usb 6-1.2: Manufacturer: Realtek
[ 3.381757] usb 6-1.2: SerialNumber: 012345678904
[ 3.405284] [drm] PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 3.407548] [drm] kiq ring mec 3 pipe 1 q 0
[ 3.410179] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 3.410213] amdgpu 0000:c3:00.0: [drm:jpeg_v4_0_hw_init [amdgpu]] JPEG decode initialized successfully.
[ 3.442462] amdgpu: HMM registered 3072MB device memory
[ 3.443816] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 3.443837] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[ 3.444107] amdgpu: Virtual CRAT table created for GPU
[ 3.444796] amdgpu: Topology: Add dGPU node [0x15bf:0x1002]
[ 3.444799] kfd kfd: amdgpu: added device 1002:15bf
[ 3.444811] amdgpu 0000:c3:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
[ 3.444818] amdgpu 0000:c3:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 3.444821] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 3.444823] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 3.444824] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 3.444826] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 3.444828] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 3.444830] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 3.444831] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 3.444833] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 3.444835] amdgpu 0000:c3:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 3.444837] amdgpu 0000:c3:00.0: amdgpu: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 3.444838] amdgpu 0000:c3:00.0: amdgpu: ring jpeg_dec uses VM inv eng 1 on hub 8
[ 3.444840] amdgpu 0000:c3:00.0: amdgpu: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[ 3.446303] [drm] ring gfx_32768.1.1 was added
[ 3.446616] [drm] ring compute_32768.2.2 was added
[ 3.446915] [drm] ring sdma_32768.3.3 was added
[ 3.446949] [drm] ring gfx_32768.1.1 ib test pass
[ 3.446981] [drm] ring compute_32768.2.2 ib test pass
[ 3.447014] [drm] ring sdma_32768.3.3 ib test pass
[ 3.449839] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:c3:00.0 on minor 1
[ 3.455707] fbcon: amdgpudrmfb (fb0) is primary device
[ 3.455710] fbcon: Deferring console take-over
[ 3.455712] amdgpu 0000:c3:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 3.501724] [drm] DSC precompute is not needed.
[ 3.642869] scsi 0:0:0:0: Direct-Access Generic MassStorageClass 2907 PQ: 0 ANSI: 6
[ 3.643693] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 3.644234] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.816712] scsi host1: uas
[ 3.820052] scsi 1:0:0:0: Direct-Access Realtek RTL9210 NVME 1.00 PQ: 0 ANSI: 6
[ 3.858126] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.859593] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.859602] sd 1:0:0:0: [sdb] Mode Sense: 37 00 00 08
[ 3.862876] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.864059] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 3.864064] sd 1:0:0:0: [sdb] Optimal transfer size 33553920 bytes
[ 3.877274] sdb: sdb1 sdb2
[ 3.877484] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.459974] BTRFS: device label manjaro_root devid 1 transid 646 /dev/sdb2 scanned by mount (581)
[ 4.460478] BTRFS info (device sdb2): first mount of filesystem 0cd726df-56bc-4991-a7b4-28711509de6f
[ 4.460504] BTRFS info (device sdb2): using crc32c (crc32c-intel) checksum algorithm
[ 4.460513] BTRFS info (device sdb2): using free space tree
[ 4.476336] BTRFS info (device sdb2): enabling ssd optimizations
[ 4.708601] systemd-journald[228]: Received SIGTERM from PID 1 (systemd).
[ 4.939504] systemd[1]: systemd 255.4-2-manjaro running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 4.939509] systemd[1]: Detected architecture x86-64.
[ 4.939638] systemd[1]: Hostname set to <manjaro>.
[ 5.517547] systemd[1]: bpf-lsm: LSM BPF program attached
[ 5.865123] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ 5.904830] systemd[1]: Stopped Switch Root.
[ 5.906257] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 5.906543] systemd[1]: Created slice Slice /system/dirmngr.
[ 5.906746] systemd[1]: Created slice Slice /system/getty.
[ 5.906959] systemd[1]: Created slice Slice /system/gpg-agent.
[ 5.907176] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 5.907373] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 5.907573] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 5.907767] systemd[1]: Created slice Slice /system/keyboxd.
[ 5.907929] systemd[1]: Created slice User and Session Slice.
[ 5.907949] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ 5.907989] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.908124] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.908142] systemd[1]: Expecting device /dev/disk/by-label/manjaro_esp...
[ 5.908153] systemd[1]: Expecting device /dev/disk/by-label/manjaro_root...
[ 5.908167] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.908180] systemd[1]: Reached target Login Prompts.
[ 5.908200] systemd[1]: Stopped target Switch Root.
[ 5.908215] systemd[1]: Stopped target Initrd File Systems.
[ 5.908228] systemd[1]: Stopped target Initrd Root File System.
[ 5.908241] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 5.908261] systemd[1]: Reached target Path Units.
[ 5.908278] systemd[1]: Reached target Remote File Systems.
[ 5.908292] systemd[1]: Reached target Slice Units.
[ 5.908313] systemd[1]: Reached target Local Verity Protected Volumes.
[ 5.908369] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.909017] systemd[1]: Listening on Process Core Dump Socket.
[ 5.909054] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.910067] systemd[1]: Listening on udev Control Socket.
[ 5.910153] systemd[1]: Listening on udev Kernel Socket.
[ 5.910229] systemd[1]: Listening on User Database Manager Socket.
[ 5.971250] systemd[1]: Mounting Huge Pages File System...
[ 5.972431] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.972993] systemd[1]: Mounting Kernel Debug File System...
[ 5.973514] systemd[1]: Mounting Kernel Trace File System...
[ 5.974125] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.974735] systemd[1]: Starting Load Kernel Module configfs...
[ 5.975317] systemd[1]: Starting Load Kernel Module dm_mod...
[ 5.975846] systemd[1]: Starting Load Kernel Module drm...
[ 5.976389] systemd[1]: Starting Load Kernel Module fuse...
[ 5.977097] systemd[1]: Starting Load Kernel Module loop...
[ 5.977140] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ 5.977200] systemd[1]: Stopped Plymouth switch root service.
[ 5.977310] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[ 5.977350] systemd[1]: Stopped File System Check on Root Device.
[ 5.979253] systemd[1]: Starting Journal Service...
[ 5.980231] systemd[1]: Starting Load Kernel Modules...
[ 5.980263] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.980870] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.980923] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.981516] systemd[1]: Starting Coldplug All udev Devices...
[ 5.982556] systemd[1]: Mounted Huge Pages File System.
[ 5.982693] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.982840] systemd[1]: Mounted Kernel Debug File System.
[ 5.982989] systemd[1]: Mounted Kernel Trace File System.
[ 5.986623] loop: module loaded
[ 5.991893] device-mapper: uevent: version 1.0.3
[ 5.991979] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 5.992095] fuse: init (API version 7.39)
[ 5.992137] systemd-journald[657]: Collecting audit messages is disabled.
[ 6.040814] systemd[1]: Finished Create List of Static Device Nodes.
[ 6.041304] systemd[1]: Started Journal Service.
[ 6.880126] mousedev: PS/2 mouse device common for all mice
[ 6.882181] amd-pmf AMDI0102:00: registered PMF device successfully
[ 6.910356] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:c3:00.3/usb1/1-5/1-5:1.0/input/input21
[ 6.911815] usbcore: registered new interface driver xpad
[ 6.921377] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.921385] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 6.931267] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.939974] ACPI: bus type thunderbolt registered
[ 6.949443] input: PC Speaker as /devices/platform/pcspkr/input/input22
[ 7.001840] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.002002] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.002100] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 7.002595] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.002598] cfg80211: failed to load regulatory.db
[ 7.015604] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 7.015607] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 7.067918] Bluetooth: Core ver 2.22
[ 7.067986] NET: Registered PF_BLUETOOTH protocol family
[ 7.067990] Bluetooth: HCI device and connection manager initialized
[ 7.068000] Bluetooth: HCI socket layer initialized
[ 7.068006] Bluetooth: L2CAP socket layer initialized
[ 7.068016] Bluetooth: SCO socket layer initialized
[ 7.075930] usbcore: registered new interface driver cdc_ether
[ 7.080993] Intel(R) Wireless WiFi driver for Linux
[ 7.081354] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[ 7.094170] iwlwifi 0000:01:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
[ 7.094426] iwlwifi 0000:01:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
[ 7.099006] usbcore: registered new interface driver btusb
[ 7.099790] snd_pci_ps 0000:c3:00.5: enabling device (0000 -> 0002)
[ 7.103666] iwlwifi 0000:01:00.0: api flags index 2 larger than supported by driver
[ 7.103690] iwlwifi 0000:01:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
[ 7.103820] Bluetooth: hci0: Firmware timestamp 2023.48 buildtype 1 build 75324
[ 7.103829] Bluetooth: hci0: No support for _PRR ACPI method
[ 7.104078] iwlwifi 0000:01:00.0: loaded firmware version 86.fb5c9aeb.0 ty-a0-gf-a0-86.ucode op_mode iwlmvm
[ 7.112439] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi
[ 7.112469] Bluetooth: hci0: Boot Address: 0x100800
[ 7.112471] Bluetooth: hci0: Firmware Version: 60-48.23
[ 7.112474] Bluetooth: hci0: Firmware already loaded
[ 7.164383] pps_core: LinuxPPS API ver. 1 registered
[ 7.164387] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 7.168517] PTP clock support registered
[ 7.169030] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.174229] kvm_amd: TSC scaling supported
[ 7.174232] kvm_amd: Nested Virtualization enabled
[ 7.174233] kvm_amd: Nested Paging enabled
[ 7.174237] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 7.174238] kvm_amd: Virtual GIF supported
[ 7.174239] kvm_amd: Virtual NMI enabled
[ 7.174239] kvm_amd: LBR virtualization supported
[ 7.174670] snd_hda_intel 0000:c3:00.1: enabling device (0000 -> 0002)
[ 7.174745] snd_hda_intel 0000:c3:00.1: Handle vga_switcheroo audio client
[ 7.175091] snd_hda_intel 0000:c3:00.6: enabling device (0000 -> 0002)
[ 7.189925] snd_hda_intel 0000:c3:00.1: bound 0000:c3:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 7.190835] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:c3:00.1/sound/card0/input23
[ 7.190881] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:c3:00.1/sound/card0/input24
[ 7.190925] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:c3:00.1/sound/card0/input25
[ 7.190966] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:c3:00.1/sound/card0/input26
[ 7.270144] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.270151] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.270153] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 7.270156] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 7.270158] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 7.270160] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 7.270162] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 7.271872] cdc_ncm 6-1.4:2.0: MAC-Address: 20:7b:d2:6b:8a:5f
[ 7.271878] cdc_ncm 6-1.4:2.0: setting rx_max = 16384
[ 7.282669] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:c3:00.6/sound/card1/input27
[ 7.282811] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:c3:00.6/sound/card1/input28
[ 7.282931] intel_rapl_common: Found RAPL domain package
[ 7.282936] intel_rapl_common: Found RAPL domain core
[ 7.283091] iwlwifi 0000:01:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
[ 7.283185] thermal thermal_zone1: failed to read out thermal zone (-61)
[ 7.284893] cdc_ncm 6-1.4:2.0: setting tx_max = 16384
[ 7.293415] iwlwifi 0000:01:00.0: WRT: Invalid buffer destination
[ 7.314616] Adding 6291452k swap on /var/swapfile. Priority:-2 extents:1 across:6291452k
[ 7.318540] systemd-journald[657]: Received client request to flush runtime journal.
[ 7.463170] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 7.463239] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 7.463295] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x90
[ 7.463352] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 7.465905] iwlwifi 0000:01:00.0: loaded PNVM version e28bb9d7
[ 7.481545] iwlwifi 0000:01:00.0: Detected RF GF, rfid=0x10d000
[ 7.553363] iwlwifi 0000:01:00.0: base HW address: c8:15:4e:49:21:e0
[ 7.568879] cdc_ncm 6-1.4:2.0 eth0: register 'cdc_ncm' at usb-0000:c5:00.3-1.4, CDC NCM (NO ZLP), 20:7b:d2:6b:8a:5f
[ 7.568996] usbcore: registered new interface driver cdc_ncm
[ 7.571710] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[ 7.573560] usbcore: registered new interface driver cdc_wdm
[ 7.578986] usbcore: registered new interface driver cdc_mbim
[ 11.164126] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.164132] Bluetooth: BNEP filters: protocol multicast
[ 11.164139] Bluetooth: BNEP socket layer initialized
[ 11.164911] Bluetooth: MGMT ver 1.22
[ 11.169718] NET: Registered PF_ALG protocol family
[ 11.387735] iwlwifi 0000:01:00.0: WRT: Invalid buffer destination
[ 11.549660] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 11.549730] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 11.549787] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x90
[ 11.549844] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 11.643163] ntfs3: Max link count 4000
[ 11.643166] ntfs3: Enabled Linux POSIX ACLs support
[ 11.643167] ntfs3: Read-only LZX/Xpress compression included
[ 11.643808] iwlwifi 0000:01:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 11.722058] iwlwifi 0000:01:00.0: WRT: Invalid buffer destination
[ 11.886017] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 11.886088] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 11.886144] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x90
[ 11.886247] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 15.838940] wlp1s0: authenticate with 48:b2:5d:44:53:7c (local address=c8:15:4e:49:21:e0)
[ 15.840506] wlp1s0: send auth to 48:b2:5d:44:53:7c (try 1/3)
[ 15.873018] wlp1s0: authenticated
[ 15.877101] wlp1s0: associate with 48:b2:5d:44:53:7c (try 1/3)
[ 15.878881] wlp1s0: RX AssocResp from 48:b2:5d:44:53:7c (capab=0x1531 status=0 aid=67)
[ 15.889156] wlp1s0: associated
[ 15.938808] wlp1s0: Limiting TX power to 26 (26 - 0) dBm as advertised by 48:b2:5d:44:53:7c
[ 17.385213] input: Handheld Controller as /devices/virtual/input/input29
[ 17.753410] Bluetooth: RFCOMM TTY layer initialized
[ 17.753418] Bluetooth: RFCOMM socket layer initialized
[ 17.753420] Bluetooth: RFCOMM ver 1.11
[ 25.347325] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 26.819853] ntfs3: nvme0n1p3: ino=198a8, Correct links count -> 1.
[ 27.703691] input: Microsoft X-Box 360 pad 0 as /devices/virtual/input/input30
[ 526.810036] wlp1s0: deauthenticating from 48:b2:5d:44:53:7c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 527.376699] PM: suspend entry (s2idle)
[ 527.397970] Filesystems sync: 0.021 seconds
[ 527.399864] Freezing user space processes
[ 527.421102] Freezing user space processes completed (elapsed 0.021 seconds)
[ 527.421112] OOM killer disabled.
[ 527.421115] Freezing remaining freezable tasks
[ 527.422541] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 527.422546] printk: Suspending console(s) (use no_console_suspend to debug)
[ 527.559311] pcieport 0000:00:08.3: quirk: disabling D3cold for suspend
[ 527.560796] ACPI: EC: interrupt blocked
[ 531.381740] ACPI: EC: interrupt unblocked
[ 531.576362] i2c_hid_acpi i2c-OPI0001:00: failed to change power setting.
[ 531.576367] i2c_hid_acpi i2c-OPI0001:00: PM: dpm_run_callback(): acpi_subsys_resume+0x0/0x80 returns -121
[ 531.576375] i2c_hid_acpi i2c-OPI0001:00: PM: failed to resume async: error -121
[ 531.576430] i2c_hid_acpi i2c-OPI0002:00: failed to change power setting.
[ 531.576433] i2c_hid_acpi i2c-OPI0002:00: PM: dpm_run_callback(): acpi_subsys_resume+0x0/0x80 returns -121
[ 531.576438] i2c_hid_acpi i2c-OPI0002:00: PM: failed to resume async: error -121
[ 531.576484] i2c_hid_acpi i2c-FTCS1000:00: failed to change power setting.
[ 531.576491] i2c_hid_acpi i2c-FTCS1000:00: PM: dpm_run_callback(): acpi_subsys_resume+0x0/0x80 returns -121
[ 531.576504] i2c_hid_acpi i2c-FTCS1000:00: PM: failed to resume async: error -121
[ 531.578254] nvme nvme0: Shutdown timeout set to 8 seconds
[ 531.579892] [drm] PCIE GART of 512M enabled (table at 0x0000008000900000).
[ 531.579923] amdgpu 0000:c3:00.0: amdgpu: SMU is resuming...
[ 531.581962] amdgpu 0000:c3:00.0: amdgpu: SMU is resumed successfully!
[ 531.582004] amdgpu 0000:c3:00.0: [drm] *ERROR* Error queueing DMUB command: status=4
[ 531.904185] i2c_hid_acpi i2c-OPI0002:00: i2c_hid_get_input: incomplete report (12/21845)
[ 531.905449] i2c_hid_acpi i2c-OPI0001:00: i2c_hid_get_input: incomplete report (12/21845)
[ 531.984263] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 531.984374] amdgpu 0000:c3:00.0: [drm:jpeg_v4_0_hw_init [amdgpu]] JPEG decode initialized successfully.
[ 531.984730] amdgpu 0000:c3:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 531.984733] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 531.984736] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 531.984737] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 531.984739] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 531.984741] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 531.984742] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 531.984743] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 531.984745] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 531.984747] amdgpu 0000:c3:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 531.984748] amdgpu 0000:c3:00.0: amdgpu: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 531.984749] amdgpu 0000:c3:00.0: amdgpu: ring jpeg_dec uses VM inv eng 1 on hub 8
[ 531.984750] amdgpu 0000:c3:00.0: amdgpu: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[ 531.990044] [drm] ring gfx_32789.1.1 was added
[ 531.990634] [drm] ring compute_32789.2.2 was added
[ 531.991182] [drm] ring sdma_32789.3.3 was added
[ 531.991209] [drm] ring gfx_32789.1.1 ib test pass
[ 531.991237] [drm] ring compute_32789.2.2 ib test pass
[ 531.991369] [drm] ring sdma_32789.3.3 ib test pass
[ 532.232183] usb 1-5: reset full-speed USB device number 3 using xhci_hcd
[ 532.378044] usb 1-5: device firmware changed
[ 532.378389] xpad 1-5:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -19
[ 532.575305] iwlwifi 0000:01:00.0: WRT: Invalid buffer destination
[ 532.734433] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 532.734480] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 532.734526] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x90
[ 532.734569] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 532.852266] OOM killer enabled.
[ 532.852270] Restarting tasks ...
[ 532.852479] usb 1-5: USB disconnect, device number 3
[ 532.852645] xpad 1-5:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -19
[ 532.854070] done.
[ 532.854156] random: crng reseeded on system resumption
[ 532.860242] PM: suspend exit
[ 532.919720] nvme nvme0: 12/0/0 default/read/poll queues
[ 533.420599] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 533.581689] usb 1-5: unable to read config index 0 descriptor/start: -71
[ 533.581696] usb 1-5: can't read configurations, error -71
[ 534.390791] usb 1-5: new full-speed USB device number 5 using xhci_hcd
[ 534.558732] usb 1-5: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10
[ 534.558746] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 534.558751] usb 1-5: Product: USB Controller
[ 534.558755] usb 1-5: Manufacturer:
[ 534.558759] usb 1-5: SerialNumber: 32869681
[ 534.594032] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:c3:00.3/usb1/1-5/1-5:1.0/input/input31
[ 534.602896] input: USB Controller as /devices/pci0000:00/0000:00:08.1/0000:c3:00.3/usb1/1-5/1-5:1.1/0003:045E:028E.0007/input/input32
[ 534.657743] hid-generic 0003:045E:028E.0007: input,hidraw3: USB HID v1.10 Keyboard [ USB Controller] on usb-0000:c3:00.3-5/input1
[ 536.529667] wlp1s0: authenticate with 48:b2:5d:44:53:7c (local address=c8:15:4e:49:21:e0)
[ 536.531124] wlp1s0: send auth to 48:b2:5d:44:53:7c (try 1/3)
[ 536.563564] wlp1s0: authenticated
[ 536.567001] wlp1s0: associate with 48:b2:5d:44:53:7c (try 1/3)
[ 536.568413] wlp1s0: RX AssocResp from 48:b2:5d:44:53:7c (capab=0x1531 status=0 aid=69)
[ 536.579873] wlp1s0: associated
[ 536.669388] wlp1s0: Limiting TX power to 26 (26 - 0) dBm as advertised by 48:b2:5d:44:53:7c
[ 670.152870] wlp1s0: deauthenticating from 48:b2:5d:44:53:7c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 670.632324] PM: suspend entry (s2idle)
[ 670.646737] Filesystems sync: 0.014 seconds
[ 670.648112] Freezing user space processes
[ 670.681535] Freezing user space processes completed (elapsed 0.033 seconds)
[ 670.681548] OOM killer disabled.
[ 670.681551] Freezing remaining freezable tasks
[ 670.683286] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 670.683295] printk: Suspending console(s) (use no_console_suspend to debug)
[ 670.689396] i2c_hid_acpi i2c-FTCS1000:00: failed to change power setting.
[ 670.813331] ACPI: EC: interrupt blocked
[ 672.628488] ACPI: EC: interrupt unblocked
[ 672.819788] i2c_hid_acpi i2c-OPI0001:00: failed to change power setting.
[ 672.819796] i2c_hid_acpi i2c-OPI0001:00: PM: dpm_run_callback(): acpi_subsys_resume+0x0/0x80 returns -121
[ 672.819811] i2c_hid_acpi i2c-OPI0001:00: PM: failed to resume async: error -121
[ 672.819824] i2c_hid_acpi i2c-OPI0002:00: failed to change power setting.
[ 672.819831] i2c_hid_acpi i2c-OPI0002:00: PM: dpm_run_callback(): acpi_subsys_resume+0x0/0x80 returns -121
[ 672.819848] i2c_hid_acpi i2c-OPI0002:00: PM: failed to resume async: error -121
[ 672.819856] i2c_hid_acpi i2c-FTCS1000:00: failed to change power setting.
[ 672.819862] i2c_hid_acpi i2c-FTCS1000:00: PM: dpm_run_callback(): acpi_subsys_resume+0x0/0x80 returns -121
[ 672.819874] i2c_hid_acpi i2c-FTCS1000:00: PM: failed to resume async: error -121
[ 672.821662] nvme nvme0: Shutdown timeout set to 8 seconds
[ 672.822979] [drm] PCIE GART of 512M enabled (table at 0x0000008000900000).
[ 672.823009] amdgpu 0000:c3:00.0: amdgpu: SMU is resuming...
[ 672.825047] amdgpu 0000:c3:00.0: amdgpu: SMU is resumed successfully!
[ 672.825090] amdgpu 0000:c3:00.0: [drm] *ERROR* Error queueing DMUB command: status=4
[ 673.151023] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 673.151298] amdgpu 0000:c3:00.0: [drm:jpeg_v4_0_hw_init [amdgpu]] JPEG decode initialized successfully.
[ 673.151534] amdgpu 0000:c3:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 673.151536] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 673.151538] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 673.151539] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 673.151541] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 673.151542] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 673.151543] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 673.151544] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 673.151546] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 673.151547] amdgpu 0000:c3:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 673.151549] amdgpu 0000:c3:00.0: amdgpu: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 673.151550] amdgpu 0000:c3:00.0: amdgpu: ring jpeg_dec uses VM inv eng 1 on hub 8
[ 673.151551] amdgpu 0000:c3:00.0: amdgpu: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[ 673.153624] i2c_hid_acpi i2c-OPI0002:00: i2c_hid_get_input: incomplete report (12/21845)
[ 673.154959] i2c_hid_acpi i2c-OPI0001:00: i2c_hid_get_input: incomplete report (12/21845)
[ 673.157830] [drm] ring gfx_32789.1.1 was added
[ 673.158435] [drm] ring compute_32789.2.2 was added
[ 673.158985] [drm] ring sdma_32789.3.3 was added
[ 673.159013] [drm] ring gfx_32789.1.1 ib test pass
[ 673.159042] [drm] ring compute_32789.2.2 ib test pass
[ 673.159164] [drm] ring sdma_32789.3.3 ib test pass
[ 673.358899] iwlwifi 0000:01:00.0: WRT: Invalid buffer destination
[ 673.517785] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 673.517837] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 673.517880] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x90
[ 673.517922] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 673.771409] usb 1-5: reset full-speed USB device number 5 using xhci_hcd
[ 673.913049] usb 1-5: device firmware changed
[ 673.913242] xpad 1-5:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -19
[ 673.916775] OOM killer enabled.
[ 673.916777] Restarting tasks ...
[ 673.916968] usb 1-5: USB disconnect, device number 5
[ 673.917187] xpad 1-5:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -19
[ 673.919337] done.
[ 673.919433] random: crng reseeded on system resumption
[ 673.925945] PM: suspend exit
[ 673.950751] nvme nvme0: 12/0/0 default/read/poll queues
[ 674.327875] usb 1-5: new full-speed USB device number 6 using xhci_hcd
[ 674.491025] usb 1-5: unable to read config index 0 descriptor/start: -71
[ 674.491037] usb 1-5: can't read configurations, error -71
[ 675.300774] usb 1-5: new full-speed USB device number 7 using xhci_hcd
[ 675.467938] usb 1-5: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10
[ 675.467951] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 675.467956] usb 1-5: Product: USB Controller
[ 675.467960] usb 1-5: Manufacturer:
[ 675.467963] usb 1-5: SerialNumber: 32869681
[ 675.501140] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:c3:00.3/usb1/1-5/1-5:1.0/input/input33
[ 675.509265] input: USB Controller as /devices/pci0000:00/0000:00:08.1/0000:c3:00.3/usb1/1-5/1-5:1.1/0003:045E:028E.0008/input/input34
[ 675.564857] hid-generic 0003:045E:028E.0008: input,hidraw3: USB HID v1.10 Keyboard [ USB Controller] on usb-0000:c3:00.3-5/input1
[ 677.623342] wlp1s0: authenticate with 48:b2:5d:44:53:7c (local address=c8:15:4e:49:21:e0)
[ 677.624393] wlp1s0: send auth to 48:b2:5d:44:53:7c (try 1/3)
[ 677.656833] wlp1s0: authenticated
[ 677.660412] wlp1s0: associate with 48:b2:5d:44:53:7c (try 1/3)
[ 677.662107] wlp1s0: RX AssocResp from 48:b2:5d:44:53:7c (capab=0x1531 status=0 aid=57)
[ 677.674003] wlp1s0: associated
[ 677.674109] wlp1s0: Limiting TX power to 26 (26 - 0) dBm as advertised by 48:b2:5d:44:53:7c
[-- Attachment #3: dmesg-68.log --]
[-- Type: text/x-log, Size: 100346 bytes --]
[ 0.000000] Linux version 6.8.1-1-MANJARO (builduser@fv-az691-899) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Fri Mar 15 21:33:24 UTC 2024
[ 0.000000] Command line: initrd=\amd-ucode.img initrd=\intel-ucode.img initrd=\arkdep\1dc7ce8f4ecc644b9c2762f9838730d83d98ab37df\initramfs-linux.img root="LABEL=manjaro_root" rootflags=subvol=/arkdep/deployments/1dc7ce8f4ecc644b9c2762f9838730d83d98ab37df/rootfs quiet splash rw
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009a7efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009a7f000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a23bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a23c000-0x000000008f7cefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008f7cf000-0x000000009232cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009232d000-0x000000009239ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000923a0000-0x0000000097415fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000097416000-0x000000009affefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009bff8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009bff9000-0x000000009bffcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009bffd000-0x000000009bffefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009bfff000-0x000000009cffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d790000-0x000000009d7effff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d7f5000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000039e2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000039f340000-0x00000004801fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x89a32018-0x89a36257] usable ==> usable
[ 0.000000] e820: update [mem 0x89a32018-0x89a36257] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009a7efff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009a7f000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a23bfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a23c000-0x0000000089a32017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000089a32018-0x0000000089a36257] usable
[ 0.000000] reserve setup_data: [mem 0x0000000089a36258-0x000000008f7cefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008f7cf000-0x000000009232cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009232d000-0x000000009239ffff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000923a0000-0x0000000097415fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000097416000-0x000000009affefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009bff8fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009bff9000-0x000000009bffcfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009bffd000-0x000000009bffefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009bfff000-0x000000009cffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009d790000-0x000000009d7effff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009d7f5000-0x000000009fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000039e2fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000039f340000-0x00000004801fffff] reserved
[ 0.000000] efi: EFI v2.8 by American Megatrends
[ 0.000000] efi: ACPI=0x973fc000 ACPI 2.0=0x973fc014 TPMFinalLog=0x973cb000 SMBIOS=0x9ad7f000 SMBIOS 3.0=0x9ad7e000 MEMATTR=0x8c097298 ESRT=0x8ae46e98 INITRD=0x89a3c218 RNG=0x92343018 TPMEventLog=0x89a37018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem54: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Remove mem55: MMIO range=[0xfd000000-0xfedfffff] (30MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd000000-0xfedfffff] reserved
[ 0.000000] efi: Not removing mem56: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem57: MMIO range=[0xfee01000-0xffffffff] (17MB) from e820 map
[ 0.000000] e820: remove [mem 0xfee01000-0xffffffff] reserved
[ 0.000000] efi: Remove mem59: MMIO range=[0x460000000-0x4801fffff] (514MB) from e820 map
[ 0.000000] e820: remove [mem 0x460000000-0x4801fffff] reserved
[ 0.000000] SMBIOS 3.5.0 present.
[ 0.000000] DMI: OrangePi NEO-01/NEO-01, BIOS 1.06 03/18/2024
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3293.826 MHz processor
[ 0.000131] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000132] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000135] last_pfn = 0x39e300 max_arch_pfn = 0x400000000
[ 0.000141] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.000142] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000373] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000381] last_pfn = 0x9bfff max_arch_pfn = 0x400000000
[ 0.002780] esrt: Reserving ESRT space from 0x000000008ae46e98 to 0x000000008ae46ed0.
[ 0.002785] e820: update [mem 0x8ae46000-0x8ae46fff] usable ==> reserved
[ 0.002794] Using GB pages for direct mapping
[ 0.003011] Secure boot disabled
[ 0.003012] RAMDISK: [mem 0x76f31000-0x7f425fff]
[ 0.003018] ACPI: Early table checksum verification disabled
[ 0.003021] ACPI: RSDP 0x00000000973FC014 000024 (v02 ALASKA)
[ 0.003024] ACPI: XSDT 0x00000000973FB728 00015C (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003028] ACPI: FACP 0x0000000092395000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.003032] ACPI: DSDT 0x000000009238C000 008D77 (v02 ALASKA A M I 01072009 INTL 20200717)
[ 0.003034] ACPI: FACS 0x00000000933B8000 000040
[ 0.003035] ACPI: SSDT 0x0000000092397000 008416 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.003036] ACPI: SSDT 0x0000000092396000 000221 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.003038] ACPI: FIDT 0x000000009238B000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003039] ACPI: MCFG 0x000000009238A000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.003040] ACPI: HPET 0x0000000092389000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.003041] ACPI: FPDT 0x0000000092388000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003042] ACPI: VFCT 0x0000000092383000 004284 (v01 ALASKA A M I 00000001 AMD 33504F47)
[ 0.003044] ACPI: TPM2 0x0000000092381000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.003045] ACPI: SSDT 0x000000009237B000 00547E (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003046] ACPI: CRAT 0x000000009237A000 000EE8 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003047] ACPI: CDIT 0x0000000092379000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003048] ACPI: SSDT 0x0000000092377000 0015C8 (v02 AMD CPMDFIG2 00000001 INTL 20200717)
[ 0.003050] ACPI: SSDT 0x0000000092374000 002A8F (v02 AMD CDFAAIG2 00000001 INTL 20200717)
[ 0.003051] ACPI: SSDT 0x0000000092372000 0013EC (v02 AMD CPMPMF 00000001 INTL 20200717)
[ 0.003052] ACPI: SSDT 0x0000000092371000 00077A (v02 AMD CPMEC 00000001 INTL 20200717)
[ 0.003053] ACPI: SSDT 0x0000000092370000 00049F (v02 AMD OEMACP 00000001 INTL 20200717)
[ 0.003054] ACPI: SSDT 0x000000009236F000 00063C (v02 AMD OEMPMF 00000001 INTL 20200717)
[ 0.003055] ACPI: SSDT 0x0000000092365000 009821 (v02 AMD CPMCMN 00000001 INTL 20200717)
[ 0.003057] ACPI: WSMT 0x0000000092364000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003058] ACPI: APIC 0x0000000092363000 0000E8 (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.003059] ACPI: IVRS 0x0000000092362000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003060] ACPI: SSDT 0x0000000092361000 000956 (v02 AMD CPMMSOSC 00000001 INTL 20200717)
[ 0.003062] ACPI: SSDT 0x0000000092360000 000EAD (v02 AMD CPMACPV5 00000001 INTL 20200717)
[ 0.003063] ACPI: SSDT 0x000000009235F000 000607 (v02 AMD TOUCHPNL 00000001 INTL 20200717)
[ 0.003064] ACPI: SSDT 0x000000009235E000 000608 (v02 AMD TOUCHPAD 00000001 INTL 20200717)
[ 0.003065] ACPI: SSDT 0x000000009235D000 0007DD (v02 AMD THERMAL0 00000001 INTL 20200717)
[ 0.003066] ACPI: SSDT 0x000000009235C000 000FF7 (v02 AMD GPP_PME_ 00000001 INTL 20200717)
[ 0.003067] ACPI: SSDT 0x0000000092352000 0097E3 (v02 AMD INTGPP03 00000001 INTL 20200717)
[ 0.003069] ACPI: SSDT 0x000000009234D000 004FEB (v02 AMD INTGPP01 00000001 INTL 20200717)
[ 0.003070] ACPI: SSDT 0x000000009234C000 000DEC (v02 AMD CPMGPIO0 00000001 INTL 20200717)
[ 0.003071] ACPI: SSDT 0x000000009234B000 00008D (v02 AMD CPMMSLPI 00000001 INTL 20200717)
[ 0.003072] ACPI: SSDT 0x000000009234A000 000501 (v02 AMD CPMSFAML 00000001 INTL 20200717)
[ 0.003073] ACPI: SSDT 0x0000000092349000 000CE0 (v02 AMD WwanSsdt 00000001 INTL 20200717)
[ 0.003074] ACPI: SSDT 0x0000000092348000 000747 (v02 AMD NVME 00000001 INTL 20200717)
[ 0.003076] ACPI: SSDT 0x0000000092347000 000C81 (v02 AMD GpMsSsdt 00000001 INTL 20200717)
[ 0.003077] ACPI: SSDT 0x0000000092346000 000057 (v02 AMD GPP0 00000001 INTL 20200717)
[ 0.003078] ACPI: SSDT 0x0000000092344000 001673 (v02 AMD UPEP 00000001 INTL 20200717)
[ 0.003079] ACPI: BGRT 0x0000000092382000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003080] ACPI: Reserving FACP table memory at [mem 0x92395000-0x92395113]
[ 0.003081] ACPI: Reserving DSDT table memory at [mem 0x9238c000-0x92394d76]
[ 0.003081] ACPI: Reserving FACS table memory at [mem 0x933b8000-0x933b803f]
[ 0.003081] ACPI: Reserving SSDT table memory at [mem 0x92397000-0x9239f415]
[ 0.003082] ACPI: Reserving SSDT table memory at [mem 0x92396000-0x92396220]
[ 0.003082] ACPI: Reserving FIDT table memory at [mem 0x9238b000-0x9238b09b]
[ 0.003082] ACPI: Reserving MCFG table memory at [mem 0x9238a000-0x9238a03b]
[ 0.003083] ACPI: Reserving HPET table memory at [mem 0x92389000-0x92389037]
[ 0.003083] ACPI: Reserving FPDT table memory at [mem 0x92388000-0x92388043]
[ 0.003083] ACPI: Reserving VFCT table memory at [mem 0x92383000-0x92387283]
[ 0.003084] ACPI: Reserving TPM2 table memory at [mem 0x92381000-0x9238104b]
[ 0.003084] ACPI: Reserving SSDT table memory at [mem 0x9237b000-0x9238047d]
[ 0.003084] ACPI: Reserving CRAT table memory at [mem 0x9237a000-0x9237aee7]
[ 0.003084] ACPI: Reserving CDIT table memory at [mem 0x92379000-0x92379028]
[ 0.003085] ACPI: Reserving SSDT table memory at [mem 0x92377000-0x923785c7]
[ 0.003085] ACPI: Reserving SSDT table memory at [mem 0x92374000-0x92376a8e]
[ 0.003085] ACPI: Reserving SSDT table memory at [mem 0x92372000-0x923733eb]
[ 0.003086] ACPI: Reserving SSDT table memory at [mem 0x92371000-0x92371779]
[ 0.003086] ACPI: Reserving SSDT table memory at [mem 0x92370000-0x9237049e]
[ 0.003086] ACPI: Reserving SSDT table memory at [mem 0x9236f000-0x9236f63b]
[ 0.003087] ACPI: Reserving SSDT table memory at [mem 0x92365000-0x9236e820]
[ 0.003087] ACPI: Reserving WSMT table memory at [mem 0x92364000-0x92364027]
[ 0.003087] ACPI: Reserving APIC table memory at [mem 0x92363000-0x923630e7]
[ 0.003087] ACPI: Reserving IVRS table memory at [mem 0x92362000-0x923621a3]
[ 0.003088] ACPI: Reserving SSDT table memory at [mem 0x92361000-0x92361955]
[ 0.003088] ACPI: Reserving SSDT table memory at [mem 0x92360000-0x92360eac]
[ 0.003088] ACPI: Reserving SSDT table memory at [mem 0x9235f000-0x9235f606]
[ 0.003089] ACPI: Reserving SSDT table memory at [mem 0x9235e000-0x9235e607]
[ 0.003089] ACPI: Reserving SSDT table memory at [mem 0x9235d000-0x9235d7dc]
[ 0.003089] ACPI: Reserving SSDT table memory at [mem 0x9235c000-0x9235cff6]
[ 0.003090] ACPI: Reserving SSDT table memory at [mem 0x92352000-0x9235b7e2]
[ 0.003090] ACPI: Reserving SSDT table memory at [mem 0x9234d000-0x92351fea]
[ 0.003090] ACPI: Reserving SSDT table memory at [mem 0x9234c000-0x9234cdeb]
[ 0.003091] ACPI: Reserving SSDT table memory at [mem 0x9234b000-0x9234b08c]
[ 0.003091] ACPI: Reserving SSDT table memory at [mem 0x9234a000-0x9234a500]
[ 0.003091] ACPI: Reserving SSDT table memory at [mem 0x92349000-0x92349cdf]
[ 0.003091] ACPI: Reserving SSDT table memory at [mem 0x92348000-0x92348746]
[ 0.003092] ACPI: Reserving SSDT table memory at [mem 0x92347000-0x92347c80]
[ 0.003092] ACPI: Reserving SSDT table memory at [mem 0x92346000-0x92346056]
[ 0.003092] ACPI: Reserving SSDT table memory at [mem 0x92344000-0x92345672]
[ 0.003093] ACPI: Reserving BGRT table memory at [mem 0x92382000-0x92382037]
[ 0.003177] No NUMA configuration found
[ 0.003178] Faking a node at [mem 0x0000000000000000-0x000000039e2fffff]
[ 0.003180] NODE_DATA(0) allocated [mem 0x39e2fb000-0x39e2fffff]
[ 0.003197] Zone ranges:
[ 0.003197] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003199] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003199] Normal [mem 0x0000000100000000-0x000000039e2fffff]
[ 0.003200] Device empty
[ 0.003200] Movable zone start for each node
[ 0.003201] Early memory node ranges
[ 0.003201] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.003202] node 0: [mem 0x0000000000100000-0x0000000009a7efff]
[ 0.003203] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.003203] node 0: [mem 0x000000000a23c000-0x000000008f7cefff]
[ 0.003203] node 0: [mem 0x000000009afff000-0x000000009bff8fff]
[ 0.003204] node 0: [mem 0x000000009bffd000-0x000000009bffefff]
[ 0.003204] node 0: [mem 0x0000000100000000-0x000000039e2fffff]
[ 0.003205] Initmem setup node 0 [mem 0x0000000000001000-0x000000039e2fffff]
[ 0.003208] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003217] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.003294] On node 0, zone DMA32: 1409 pages in unavailable ranges
[ 0.004699] On node 0, zone DMA32: 60 pages in unavailable ranges
[ 0.004761] On node 0, zone DMA32: 14384 pages in unavailable ranges
[ 0.004762] On node 0, zone DMA32: 4 pages in unavailable ranges
[ 0.012257] On node 0, zone Normal: 16385 pages in unavailable ranges
[ 0.012284] On node 0, zone Normal: 7424 pages in unavailable ranges
[ 0.012624] ACPI: PM-Timer IO Port: 0x808
[ 0.012631] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.012647] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[ 0.012657] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[ 0.012658] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.012660] ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 1 low edge)
[ 0.012660] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.012663] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.012664] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.012672] e820: update [mem 0x8b07c000-0x8b0ddfff] usable ==> reserved
[ 0.012680] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.012691] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.012692] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.012693] PM: hibernation: Registered nosave memory: [mem 0x09a7f000-0x09ffffff]
[ 0.012694] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a23bfff]
[ 0.012694] PM: hibernation: Registered nosave memory: [mem 0x89a32000-0x89a32fff]
[ 0.012695] PM: hibernation: Registered nosave memory: [mem 0x89a36000-0x89a36fff]
[ 0.012696] PM: hibernation: Registered nosave memory: [mem 0x8ae46000-0x8ae46fff]
[ 0.012696] PM: hibernation: Registered nosave memory: [mem 0x8b07c000-0x8b0ddfff]
[ 0.012697] PM: hibernation: Registered nosave memory: [mem 0x8f7cf000-0x9232cfff]
[ 0.012697] PM: hibernation: Registered nosave memory: [mem 0x9232d000-0x9239ffff]
[ 0.012698] PM: hibernation: Registered nosave memory: [mem 0x923a0000-0x97415fff]
[ 0.012698] PM: hibernation: Registered nosave memory: [mem 0x97416000-0x9affefff]
[ 0.012699] PM: hibernation: Registered nosave memory: [mem 0x9bff9000-0x9bffcfff]
[ 0.012699] PM: hibernation: Registered nosave memory: [mem 0x9bfff000-0x9cffffff]
[ 0.012700] PM: hibernation: Registered nosave memory: [mem 0x9d000000-0x9d78ffff]
[ 0.012700] PM: hibernation: Registered nosave memory: [mem 0x9d790000-0x9d7effff]
[ 0.012700] PM: hibernation: Registered nosave memory: [mem 0x9d7f0000-0x9d7f4fff]
[ 0.012701] PM: hibernation: Registered nosave memory: [mem 0x9d7f5000-0x9fffffff]
[ 0.012701] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xfedfffff]
[ 0.012701] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.012701] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.012703] [mem 0xa0000000-0xfedfffff] available for PCI devices
[ 0.012703] Booting paravirtualized kernel on bare hardware
[ 0.012705] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.015541] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.015802] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[ 0.015806] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[ 0.015807] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.015820] Kernel command line: initrd=\amd-ucode.img initrd=\intel-ucode.img initrd=\arkdep\1dc7ce8f4ecc644b9c2762f9838730d83d98ab37df\initramfs-linux.img root="LABEL=manjaro_root" rootflags=subvol=/arkdep/deployments/1dc7ce8f4ecc644b9c2762f9838730d83d98ab37df/rootfs quiet splash rw
[ 0.015878] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.016741] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.017089] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.017151] Fallback order for Node 0: 0
[ 0.017154] Built 1 zonelists, mobility grouping on. Total pages: 3283065
[ 0.017155] Policy zone: Normal
[ 0.017277] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.017343] software IO TLB: area num 16.
[ 0.033375] Memory: 12810976K/13341364K available (16384K kernel code, 2147K rwdata, 13052K rodata, 3456K init, 3728K bss, 530128K reserved, 0K cma-reserved)
[ 0.033522] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.033541] ftrace: allocating 49327 entries in 193 pages
[ 0.041250] ftrace: allocated 193 pages with 3 groups
[ 0.041304] Dynamic Preempt: full
[ 0.041345] rcu: Preemptible hierarchical RCU implementation.
[ 0.041346] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[ 0.041347] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.041347] Trampoline variant of Tasks RCU enabled.
[ 0.041348] Rude variant of Tasks RCU enabled.
[ 0.041348] Tracing variant of Tasks RCU enabled.
[ 0.041348] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.041349] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.042719] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[ 0.042924] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.043091] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.043118] Console: colour dummy device 80x25
[ 0.043120] printk: legacy console [tty0] enabled
[ 0.043146] ACPI: Core revision 20230628
[ 0.043329] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.043348] APIC: Switch to symmetric I/O mode setup
[ 0.043842] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[ 0.043844] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[ 0.043844] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[ 0.043845] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[ 0.043845] AMD-Vi: Using global IVHD EFR:0x246577efa2254afa, EFR2:0x0
[ 0.044787] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.044797] APIC: Switched APIC routing to: physical flat
[ 0.046182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060026] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f7a84671e2, max_idle_ns: 440795331774 ns
[ 0.060029] Calibrating delay loop (skipped), value calculated using timer frequency.. 6590.13 BogoMIPS (lpj=10979420)
[ 0.060046] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.060106] LVT offset 1 assigned for vector 0xf9
[ 0.060329] LVT offset 2 assigned for vector 0xf4
[ 0.060384] process: using mwait in idle threads
[ 0.060386] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.060386] Last level dTLB entries: 4KB 3072, 2MB 3072, 4MB 1536, 1GB 0
[ 0.060390] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.060392] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.060393] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.060395] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.060396] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.060397] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.060399] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.060405] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.060406] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.060407] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.060407] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.060408] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.060408] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.060408] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.060409] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.060410] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.060411] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.060412] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.060412] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.060413] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.060413] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16
[ 0.060414] x86/fpu: Enabled xstate features 0xae7, context size is 2456 bytes, using 'compacted' format.
[ 0.079362] Freeing SMP alternatives memory: 40K
[ 0.079364] pid_max: default: 32768 minimum: 301
[ 0.080555] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[ 0.080576] landlock: Up and running.
[ 0.080577] Yama: becoming mindful.
[ 0.080580] LSM support for eBPF active
[ 0.080612] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.080624] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.187678] smpboot: CPU0: AMD Ryzen 7 7840U w/ Radeon 780M Graphics (family: 0x19, model: 0x74, stepping: 0x1)
[ 0.187818] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.187832] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.187844] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.187860] Performance Events: Fam17h+ 16-deep LBR, core perfctr, AMD PMU driver.
[ 0.187881] ... version: 2
[ 0.187883] ... bit width: 48
[ 0.187883] ... generic registers: 6
[ 0.187884] ... value mask: 0000ffffffffffff
[ 0.187885] ... max period: 00007fffffffffff
[ 0.187885] ... fixed-purpose events: 0
[ 0.187886] ... event mask: 000000000000003f
[ 0.187949] signal: max sigframe size: 3376
[ 0.187975] rcu: Hierarchical SRCU implementation.
[ 0.187975] rcu: Max phase no-delay instances is 1000.
[ 0.189820] MCE: In-kernel MCE decoding enabled.
[ 0.189865] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.189973] smp: Bringing up secondary CPUs ...
[ 0.190027] smpboot: x86: Booting SMP configuration:
[ 0.190027] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.206795] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.222028] smp: Brought up 1 node, 16 CPUs
[ 0.222028] smpboot: Max logical packages: 1
[ 0.222028] smpboot: Total of 16 processors activated (105444.20 BogoMIPS)
[ 0.223672] devtmpfs: initialized
[ 0.223672] x86/mm: Memory block size: 128MB
[ 0.227076] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a23bfff] (245760 bytes)
[ 0.227076] ACPI: PM: Registering ACPI NVS region [mem 0x923a0000-0x97415fff] (84369408 bytes)
[ 0.227518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.227530] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.227591] pinctrl core: initialized pinctrl subsystem
[ 0.227722] PM: RTC time: 08:50:59, date: 2024-03-18
[ 0.227882] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.227882] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.227882] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.227882] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.227882] audit: initializing netlink subsys (disabled)
[ 0.227887] audit: type=2000 audit(1710751859.183:1): state=initialized audit_enabled=0 res=1
[ 0.227887] thermal_sys: Registered thermal governor 'fair_share'
[ 0.227887] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.227887] thermal_sys: Registered thermal governor 'step_wise'
[ 0.227887] thermal_sys: Registered thermal governor 'user_space'
[ 0.227887] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.227887] cpuidle: using governor ladder
[ 0.227887] cpuidle: using governor menu
[ 0.227887] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.227887] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.227887] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[ 0.227887] PCI: Using configuration type 1 for base access
[ 0.227887] PCI: Using configuration type 1 for extended access
[ 0.227887] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.227887] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.227887] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.227887] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.227887] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.227887] ACPI: Added _OSI(Module Device)
[ 0.227887] ACPI: Added _OSI(Processor Device)
[ 0.227887] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.227887] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.248388] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP6.DEV0], AE_NOT_FOUND (20230628/dswload2-162)
[ 0.248393] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
[ 0.248395] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.248947] ACPI: 27 ACPI AML tables successfully acquired and loaded
[ 0.250792] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.267360] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.267361] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.267837] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.267879] ACPI: EC: EC started
[ 0.267879] ACPI: EC: interrupt blocked
[ 0.267919] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.267921] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
[ 0.267922] ACPI: Interpreter enabled
[ 0.267934] ACPI: PM: (supports S0 S4 S5)
[ 0.267935] ACPI: Using IOAPIC for interrupt routing
[ 0.269301] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.269339] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[ 0.269348] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.269349] PCI: Ignoring E820 reservations for host bridge windows
[ 0.269882] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.271290] ACPI: \_SB_.PCI0.GPP2.P0WW: New power resource
[ 0.273673] ACPI: \_SB_.PCI0.GPP8.P0NV: New power resource
[ 0.275994] ACPI: \_SB_.PCI0.GP11.PWRS: New power resource
[ 0.277616] ACPI: \_SB_.PCI0.GP11.SWUS.PWRS: New power resource
[ 0.279291] ACPI: \_SB_.PCI0.GP12.PWRS: New power resource
[ 0.280823] ACPI: \_SB_.PCI0.GP12.SWUS.PWRS: New power resource
[ 0.281073] ACPI: \_SB_.PCI0.GP17.PWRS: New power resource
[ 0.281337] ACPI: \_SB_.PCI0.GP17.VGA_.PWRS: New power resource
[ 0.281657] ACPI: \_SB_.PCI0.GP17.HDAU.PWRS: New power resource
[ 0.281926] ACPI: \_SB_.PCI0.GP17.ACP_.PWRS: New power resource
[ 0.282554] ACPI: \_SB_.PCI0.GP17.AZAL.PWRS: New power resource
[ 0.283208] ACPI: \_SB_.PCI0.GP17.XHC0.PWRS: New power resource
[ 0.286160] ACPI: \_SB_.PCI0.GP17.XHC1.PWRS: New power resource
[ 0.288401] ACPI: \_SB_.PCI0.GP19.XHC2.PWRS: New power resource
[ 0.289967] ACPI: \_SB_.PCI0.GP19.XHC3.PWRS: New power resource
[ 0.291567] ACPI: \_SB_.PCI0.GP19.XHC4.PWRS: New power resource
[ 0.293153] ACPI: \_SB_.PCI0.GP19.NHI0.PWRS: New power resource
[ 0.294055] ACPI: \_SB_.PCI0.GP19.NHI1.PWRS: New power resource
[ 0.305405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.305410] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.305581] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.306333] PCI host bridge to bus 0000:00
[ 0.306334] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.306335] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.306337] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.306338] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.306339] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.306340] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfcffffff window]
[ 0.306341] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xf9ffffff window]
[ 0.306342] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[ 0.306343] pci_bus 0000:00: root bus resource [mem 0x460000000-0x7fffffffff window]
[ 0.306344] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.306378] pci 0000:00:00.0: [1022:14e8] type 00 class 0x060000 conventional PCI endpoint
[ 0.306639] pci 0000:00:00.2: [1022:14e9] type 00 class 0x080600 conventional PCI endpoint
[ 0.306929] pci 0000:00:01.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.307114] pci 0000:00:02.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.307310] pci 0000:00:02.3: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.307446] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.307458] pci 0000:00:02.3: bridge window [mem 0xdca00000-0xdcafffff]
[ 0.307517] pci 0000:00:02.3: enabling Extended Tags
[ 0.307728] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.308139] pci 0000:00:02.4: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.308274] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.308286] pci 0000:00:02.4: bridge window [mem 0xdc900000-0xdc9fffff]
[ 0.308343] pci 0000:00:02.4: enabling Extended Tags
[ 0.308550] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.308932] pci 0000:00:03.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.309126] pci 0000:00:03.1: [1022:14ef] type 01 class 0x060400 PCIe Root Port
[ 0.309296] pci 0000:00:03.1: PCI bridge to [bus 03-62]
[ 0.309304] pci 0000:00:03.1: bridge window [io 0xb000-0xefff]
[ 0.309311] pci 0000:00:03.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.309343] pci 0000:00:03.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.309374] pci 0000:00:03.1: enabling Extended Tags
[ 0.309780] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.311088] pci 0000:00:04.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.311292] pci 0000:00:04.1: [1022:14ef] type 01 class 0x060400 PCIe Root Port
[ 0.311462] pci 0000:00:04.1: PCI bridge to [bus 63-c2]
[ 0.311470] pci 0000:00:04.1: bridge window [io 0x7000-0xafff]
[ 0.311476] pci 0000:00:04.1: bridge window [mem 0xac000000-0xc3ffffff]
[ 0.311509] pci 0000:00:04.1: bridge window [mem 0x5c00000000-0x6bffffffff 64bit pref]
[ 0.311542] pci 0000:00:04.1: enabling Extended Tags
[ 0.311951] pci 0000:00:04.1: PME# supported from D0 D3hot D3cold
[ 0.313280] pci 0000:00:08.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.313450] pci 0000:00:08.1: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.313467] pci 0000:00:08.1: PCI bridge to [bus c3]
[ 0.313473] pci 0000:00:08.1: bridge window [io 0xf000-0xffff]
[ 0.313477] pci 0000:00:08.1: bridge window [mem 0xdc000000-0xdc5fffff]
[ 0.313485] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.313494] pci 0000:00:08.1: enabling Extended Tags
[ 0.313536] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.313667] pci 0000:00:08.2: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.313730] pci 0000:00:08.2: PCI bridge to [bus c4]
[ 0.313746] pci 0000:00:08.2: enabling Extended Tags
[ 0.313789] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.313892] pci 0000:00:08.3: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.313910] pci 0000:00:08.3: PCI bridge to [bus c5]
[ 0.313916] pci 0000:00:08.3: bridge window [mem 0xdc600000-0xdc8fffff]
[ 0.313929] pci 0000:00:08.3: enabling Extended Tags
[ 0.313971] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[ 0.314262] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.314388] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.314518] pci 0000:00:18.0: [1022:14f0] type 00 class 0x060000 conventional PCI endpoint
[ 0.314547] pci 0000:00:18.1: [1022:14f1] type 00 class 0x060000 conventional PCI endpoint
[ 0.314577] pci 0000:00:18.2: [1022:14f2] type 00 class 0x060000 conventional PCI endpoint
[ 0.314606] pci 0000:00:18.3: [1022:14f3] type 00 class 0x060000 conventional PCI endpoint
[ 0.314635] pci 0000:00:18.4: [1022:14f4] type 00 class 0x060000 conventional PCI endpoint
[ 0.314666] pci 0000:00:18.5: [1022:14f5] type 00 class 0x060000 conventional PCI endpoint
[ 0.314695] pci 0000:00:18.6: [1022:14f6] type 00 class 0x060000 conventional PCI endpoint
[ 0.314726] pci 0000:00:18.7: [1022:14f7] type 00 class 0x060000 conventional PCI endpoint
[ 0.315247] pci 0000:01:00.0: [8086:2725] type 00 class 0x028000 PCIe Endpoint
[ 0.315314] pci 0000:01:00.0: BAR 0 [mem 0xdca00000-0xdca03fff 64bit]
[ 0.315519] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.316641] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.316970] pci 0000:02:00.0: [144d:a809] type 00 class 0x010802 PCIe Endpoint
[ 0.316989] pci 0000:02:00.0: BAR 0 [mem 0xdc900000-0xdc903fff 64bit]
[ 0.317342] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.317430] pci 0000:00:03.1: PCI bridge to [bus 03-62]
[ 0.317572] pci 0000:00:04.1: PCI bridge to [bus 63-c2]
[ 0.317842] pci 0000:c3:00.0: [1002:15bf] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.317857] pci 0000:c3:00.0: BAR 0 [mem 0x7c00000000-0x7c0fffffff 64bit pref]
[ 0.317868] pci 0000:c3:00.0: BAR 2 [mem 0xdc000000-0xdc1fffff 64bit pref]
[ 0.317876] pci 0000:c3:00.0: BAR 4 [io 0xf000-0xf0ff]
[ 0.317884] pci 0000:c3:00.0: BAR 5 [mem 0xdc500000-0xdc57ffff]
[ 0.317896] pci 0000:c3:00.0: enabling Extended Tags
[ 0.317914] pci 0000:c3:00.0: BAR 0: assigned to efifb
[ 0.317969] pci 0000:c3:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.318108] pci 0000:c3:00.1: [1002:1640] type 00 class 0x040300 PCIe Legacy Endpoint
[ 0.318119] pci 0000:c3:00.1: BAR 0 [mem 0xdc5c8000-0xdc5cbfff]
[ 0.318146] pci 0000:c3:00.1: enabling Extended Tags
[ 0.318186] pci 0000:c3:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.318273] pci 0000:c3:00.2: [1022:15c7] type 00 class 0x108000 PCIe Endpoint
[ 0.318290] pci 0000:c3:00.2: BAR 2 [mem 0xdc400000-0xdc4fffff]
[ 0.318303] pci 0000:c3:00.2: BAR 5 [mem 0xdc5cc000-0xdc5cdfff]
[ 0.318314] pci 0000:c3:00.2: enabling Extended Tags
[ 0.318437] pci 0000:c3:00.3: [1022:15b9] type 00 class 0x0c0330 PCIe Endpoint
[ 0.318452] pci 0000:c3:00.3: BAR 0 [mem 0xdc300000-0xdc3fffff 64bit]
[ 0.318482] pci 0000:c3:00.3: enabling Extended Tags
[ 0.318525] pci 0000:c3:00.3: PME# supported from D0 D3hot D3cold
[ 0.318620] pci 0000:c3:00.4: [1022:15ba] type 00 class 0x0c0330 PCIe Endpoint
[ 0.318635] pci 0000:c3:00.4: BAR 0 [mem 0xdc200000-0xdc2fffff 64bit]
[ 0.318665] pci 0000:c3:00.4: enabling Extended Tags
[ 0.318708] pci 0000:c3:00.4: PME# supported from D0 D3hot D3cold
[ 0.318800] pci 0000:c3:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint
[ 0.318810] pci 0000:c3:00.5: BAR 0 [mem 0xdc580000-0xdc5bffff]
[ 0.318823] pci 0000:c3:00.5: BAR 2 [mem 0x7c10000000-0x7c107fffff 64bit pref]
[ 0.318840] pci 0000:c3:00.5: enabling Extended Tags
[ 0.318880] pci 0000:c3:00.5: PME# supported from D0 D3hot D3cold
[ 0.318974] pci 0000:c3:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
[ 0.318984] pci 0000:c3:00.6: BAR 0 [mem 0xdc5c0000-0xdc5c7fff]
[ 0.319011] pci 0000:c3:00.6: enabling Extended Tags
[ 0.319051] pci 0000:c3:00.6: PME# supported from D0 D3hot D3cold
[ 0.319158] pci 0000:00:08.1: PCI bridge to [bus c3]
[ 0.319216] pci 0000:c4:00.0: [1022:14ec] type 00 class 0x130000 PCIe Endpoint
[ 0.319249] pci 0000:c4:00.0: enabling Extended Tags
[ 0.319301] pci 0000:c4:00.0: PME# supported from D3hot D3cold
[ 0.319407] pci 0000:00:08.2: PCI bridge to [bus c4]
[ 0.319569] pci 0000:c5:00.0: [1022:14ec] type 00 class 0x130000 PCIe Endpoint
[ 0.319603] pci 0000:c5:00.0: enabling Extended Tags
[ 0.319762] pci 0000:c5:00.3: [1022:15c0] type 00 class 0x0c0330 PCIe Endpoint
[ 0.319776] pci 0000:c5:00.3: BAR 0 [mem 0xdc700000-0xdc7fffff 64bit]
[ 0.319806] pci 0000:c5:00.3: enabling Extended Tags
[ 0.319849] pci 0000:c5:00.3: PME# supported from D0 D3hot D3cold
[ 0.319939] pci 0000:c5:00.4: [1022:15c1] type 00 class 0x0c0330 PCIe Endpoint
[ 0.319954] pci 0000:c5:00.4: BAR 0 [mem 0xdc600000-0xdc6fffff 64bit]
[ 0.319984] pci 0000:c5:00.4: enabling Extended Tags
[ 0.320038] pci 0000:c5:00.4: PME# supported from D0 D3hot D3cold
[ 0.320131] pci 0000:c5:00.5: [1022:1668] type 00 class 0x0c0340 PCIe Endpoint
[ 0.320150] pci 0000:c5:00.5: BAR 0 [mem 0xdc880000-0xdc8fffff 64bit]
[ 0.320183] pci 0000:c5:00.5: enabling Extended Tags
[ 0.320226] pci 0000:c5:00.5: PME# supported from D0 D3hot D3cold
[ 0.320319] pci 0000:c5:00.6: [1022:1669] type 00 class 0x0c0340 PCIe Endpoint
[ 0.320337] pci 0000:c5:00.6: BAR 0 [mem 0xdc800000-0xdc87ffff 64bit]
[ 0.320371] pci 0000:c5:00.6: enabling Extended Tags
[ 0.320414] pci 0000:c5:00.6: PME# supported from D0 D3hot D3cold
[ 0.320516] pci 0000:00:08.3: PCI bridge to [bus c5]
[ 0.329387] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.329450] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.329505] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.329572] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.329633] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.329684] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.329734] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.329785] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.334696] Low-power S0 idle used by default for system suspend
[ 0.334991] ACPI: EC: interrupt unblocked
[ 0.334992] ACPI: EC: event unblocked
[ 0.334997] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.334998] ACPI: EC: GPE=0xb
[ 0.334999] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
[ 0.335001] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.335044] iommu: Default domain type: Translated
[ 0.335044] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.335044] SCSI subsystem initialized
[ 0.336707] libata version 3.00 loaded.
[ 0.336707] ACPI: bus type USB registered
[ 0.336715] usbcore: registered new interface driver usbfs
[ 0.336720] usbcore: registered new interface driver hub
[ 0.336727] usbcore: registered new device driver usb
[ 0.363554] EDAC MC: Ver: 3.0.0
[ 0.364134] efivars: Registered efivars operations
[ 0.364134] NetLabel: Initializing
[ 0.364134] NetLabel: domain hash size = 128
[ 0.364134] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.364134] NetLabel: unlabeled traffic allowed by default
[ 0.364134] mctp: management component transport protocol core
[ 0.364134] NET: Registered PF_MCTP protocol family
[ 0.364134] PCI: Using ACPI for IRQ routing
[ 0.373951] PCI: pci_cache_line_size set to 64 bytes
[ 0.374864] e820: reserve RAM buffer [mem 0x09a7f000-0x0bffffff]
[ 0.374866] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.374867] e820: reserve RAM buffer [mem 0x89a32018-0x8bffffff]
[ 0.374868] e820: reserve RAM buffer [mem 0x8ae46000-0x8bffffff]
[ 0.374868] e820: reserve RAM buffer [mem 0x8b07c000-0x8bffffff]
[ 0.374869] e820: reserve RAM buffer [mem 0x8f7cf000-0x8fffffff]
[ 0.374870] e820: reserve RAM buffer [mem 0x9bff9000-0x9bffffff]
[ 0.374871] e820: reserve RAM buffer [mem 0x9bfff000-0x9bffffff]
[ 0.374871] e820: reserve RAM buffer [mem 0x39e300000-0x39fffffff]
[ 0.374902] pci 0000:c3:00.0: vgaarb: setting as boot VGA device
[ 0.374902] pci 0000:c3:00.0: vgaarb: bridge control possible
[ 0.374902] pci 0000:c3:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.374902] vgaarb: loaded
[ 0.374902] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.374902] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.376788] clocksource: Switched to clocksource tsc-early
[ 0.376892] VFS: Disk quotas dquot_6.6.0
[ 0.376902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.376954] pnp: PnP ACPI init
[ 0.377027] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.382207] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.382209] system 00:03: [io 0x040b] has been reserved
[ 0.382211] system 00:03: [io 0x04d6] has been reserved
[ 0.382212] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.382213] system 00:03: [io 0x0c14] has been reserved
[ 0.382214] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.382215] system 00:03: [io 0x0c52] has been reserved
[ 0.382216] system 00:03: [io 0x0c6c] has been reserved
[ 0.382217] system 00:03: [io 0x0c6f] has been reserved
[ 0.382218] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.382219] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.382220] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.382221] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.382224] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.382225] system 00:03: [io 0x0800-0x089f] has been reserved
[ 0.382226] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.382227] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.382228] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.382229] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.382231] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.382232] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.382235] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.382238] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.382240] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.382242] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.382243] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[ 0.383783] pnp: PnP ACPI: found 4 devices
[ 0.389647] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.389795] NET: Registered PF_INET protocol family
[ 0.389943] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.399963] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.399973] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.399987] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.400116] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.400178] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.400238] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.400264] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.400285] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.400330] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.400335] NET: Registered PF_XDP protocol family
[ 0.400345] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.400372] pci 0000:00:02.3: bridge window [mem 0xdca00000-0xdcafffff]
[ 0.400388] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.400402] pci 0000:00:02.4: bridge window [mem 0xdc900000-0xdc9fffff]
[ 0.400419] pci 0000:00:03.1: PCI bridge to [bus 03-62]
[ 0.400421] pci 0000:00:03.1: bridge window [io 0xb000-0xefff]
[ 0.400441] pci 0000:00:03.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.400465] pci 0000:00:03.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.400513] pci 0000:00:04.1: PCI bridge to [bus 63-c2]
[ 0.400515] pci 0000:00:04.1: bridge window [io 0x7000-0xafff]
[ 0.400546] pci 0000:00:04.1: bridge window [mem 0xac000000-0xc3ffffff]
[ 0.400570] pci 0000:00:04.1: bridge window [mem 0x5c00000000-0x6bffffffff 64bit pref]
[ 0.400619] pci 0000:00:08.1: PCI bridge to [bus c3]
[ 0.400620] pci 0000:00:08.1: bridge window [io 0xf000-0xffff]
[ 0.400626] pci 0000:00:08.1: bridge window [mem 0xdc000000-0xdc5fffff]
[ 0.400630] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.400635] pci 0000:00:08.2: PCI bridge to [bus c4]
[ 0.400643] pci 0000:00:08.3: PCI bridge to [bus c5]
[ 0.400648] pci 0000:00:08.3: bridge window [mem 0xdc600000-0xdc8fffff]
[ 0.400655] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.400656] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.400657] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.400658] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.400659] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.400660] pci_bus 0000:00: resource 9 [mem 0xfa000000-0xfcffffff window]
[ 0.400661] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xf9ffffff window]
[ 0.400663] pci_bus 0000:00: resource 11 [mem 0xa0000000-0xdfffffff window]
[ 0.400664] pci_bus 0000:00: resource 12 [mem 0x460000000-0x7fffffffff window]
[ 0.400665] pci_bus 0000:01: resource 1 [mem 0xdca00000-0xdcafffff]
[ 0.400666] pci_bus 0000:02: resource 1 [mem 0xdc900000-0xdc9fffff]
[ 0.400667] pci_bus 0000:03: resource 0 [io 0xb000-0xefff]
[ 0.400669] pci_bus 0000:03: resource 1 [mem 0xc4000000-0xdbffffff]
[ 0.400669] pci_bus 0000:03: resource 2 [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.400671] pci_bus 0000:63: resource 0 [io 0x7000-0xafff]
[ 0.400672] pci_bus 0000:63: resource 1 [mem 0xac000000-0xc3ffffff]
[ 0.400673] pci_bus 0000:63: resource 2 [mem 0x5c00000000-0x6bffffffff 64bit pref]
[ 0.400674] pci_bus 0000:c3: resource 0 [io 0xf000-0xffff]
[ 0.400675] pci_bus 0000:c3: resource 1 [mem 0xdc000000-0xdc5fffff]
[ 0.400676] pci_bus 0000:c3: resource 2 [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.400677] pci_bus 0000:c5: resource 1 [mem 0xdc600000-0xdc8fffff]
[ 0.401284] pci 0000:c3:00.1: D0 power state depends on 0000:c3:00.0
[ 0.401362] pci 0000:00:08.1: can't derive routing for PCI INT A
[ 0.401363] pci 0000:00:08.1: PCI INT A: not connected
[ 0.401670] pci 0000:00:08.3: can't derive routing for PCI INT A
[ 0.401671] pci 0000:00:08.3: PCI INT A: not connected
[ 0.401884] PCI: CLS 64 bytes, default 64
[ 0.401898] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.401938] pci 0000:00:01.0: Adding to iommu group 0
[ 0.401952] Trying to unpack rootfs image as initramfs...
[ 0.401968] pci 0000:00:02.0: Adding to iommu group 1
[ 0.401988] pci 0000:00:02.3: Adding to iommu group 2
[ 0.402008] pci 0000:00:02.4: Adding to iommu group 3
[ 0.402028] pci 0000:00:03.0: Adding to iommu group 4
[ 0.402038] pci 0000:00:03.1: Adding to iommu group 4
[ 0.402059] pci 0000:00:04.0: Adding to iommu group 5
[ 0.402069] pci 0000:00:04.1: Adding to iommu group 5
[ 0.402104] pci 0000:00:08.0: Adding to iommu group 6
[ 0.402120] pci 0000:00:08.1: Adding to iommu group 7
[ 0.402137] pci 0000:00:08.2: Adding to iommu group 8
[ 0.402155] pci 0000:00:08.3: Adding to iommu group 9
[ 0.402176] pci 0000:00:14.0: Adding to iommu group 10
[ 0.402186] pci 0000:00:14.3: Adding to iommu group 10
[ 0.402237] pci 0000:00:18.0: Adding to iommu group 11
[ 0.402249] pci 0000:00:18.1: Adding to iommu group 11
[ 0.402260] pci 0000:00:18.2: Adding to iommu group 11
[ 0.402272] pci 0000:00:18.3: Adding to iommu group 11
[ 0.402284] pci 0000:00:18.4: Adding to iommu group 11
[ 0.402296] pci 0000:00:18.5: Adding to iommu group 11
[ 0.402307] pci 0000:00:18.6: Adding to iommu group 11
[ 0.402318] pci 0000:00:18.7: Adding to iommu group 11
[ 0.402349] pci 0000:01:00.0: Adding to iommu group 12
[ 0.402365] pci 0000:02:00.0: Adding to iommu group 13
[ 0.402397] pci 0000:c3:00.0: Adding to iommu group 14
[ 0.402419] pci 0000:c3:00.1: Adding to iommu group 15
[ 0.402442] pci 0000:c3:00.2: Adding to iommu group 16
[ 0.402467] pci 0000:c3:00.3: Adding to iommu group 17
[ 0.402489] pci 0000:c3:00.4: Adding to iommu group 18
[ 0.402512] pci 0000:c3:00.5: Adding to iommu group 19
[ 0.402535] pci 0000:c3:00.6: Adding to iommu group 20
[ 0.402549] pci 0000:c4:00.0: Adding to iommu group 21
[ 0.402577] pci 0000:c5:00.0: Adding to iommu group 22
[ 0.402599] pci 0000:c5:00.3: Adding to iommu group 23
[ 0.402622] pci 0000:c5:00.4: Adding to iommu group 24
[ 0.402646] pci 0000:c5:00.5: Adding to iommu group 25
[ 0.402669] pci 0000:c5:00.6: Adding to iommu group 26
[ 0.405219] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.405221] pci 0000:00:00.2: PCI INT A: not connected
[ 0.405364] AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
[ 0.405371] AMD-Vi: Interrupt remapping enabled
[ 0.405554] AMD-Vi: Virtual APIC enabled
[ 0.405626] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.405646] software IO TLB: mapped [mem 0x0000000085a32000-0x0000000089a32000] (64MB)
[ 0.405702] LVT offset 0 assigned for vector 0x400
[ 0.405804] perf: AMD IBS detected (0x00000bff)
[ 0.405810] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.411776] Initialise system trusted keyrings
[ 0.411792] Key type blacklist registered
[ 0.411840] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.411851] zbud: loaded
[ 0.412078] integrity: Platform Keyring initialized
[ 0.412083] integrity: Machine keyring initialized
[ 0.419838] Key type asymmetric registered
[ 0.419840] Asymmetric key parser 'x509' registered
[ 0.419855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.419908] io scheduler mq-deadline registered
[ 0.419909] io scheduler kyber registered
[ 0.419917] io scheduler bfq registered
[ 0.421789] pcieport 0000:00:02.3: PME: Signaling with IRQ 38
[ 0.422216] pcieport 0000:00:02.4: PME: Signaling with IRQ 39
[ 0.422688] pcieport 0000:00:03.1: PME: Signaling with IRQ 40
[ 0.422818] pcieport 0000:00:03.1: AER: enabled with IRQ 40
[ 0.422851] pcieport 0000:00:03.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.423634] pcieport 0000:00:04.1: PME: Signaling with IRQ 41
[ 0.423758] pcieport 0000:00:04.1: AER: enabled with IRQ 41
[ 0.423790] pcieport 0000:00:04.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.424394] pcieport 0000:00:08.1: PME: Signaling with IRQ 42
[ 0.424488] pcieport 0000:00:08.2: can't derive routing for PCI INT A
[ 0.424490] pcieport 0000:00:08.2: PCI INT A: not connected
[ 0.424628] pcieport 0000:00:08.2: PME: Signaling with IRQ 43
[ 0.424811] pcieport 0000:00:08.3: PME: Signaling with IRQ 44
[ 0.424910] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.425927] ACPI: AC: AC Adapter [ACAD] (on-line)
[ 0.425972] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.425989] ACPI: button: Power Button [PWRB]
[ 0.426064] Estimated ratio of average max frequency by base frequency (times 1024): 1548
[ 0.426079] Monitor-Mwait will be used to enter C-1 state
[ 0.426083] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[ 0.426221] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[ 0.426352] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[ 0.426479] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[ 0.426604] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[ 0.426733] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[ 0.426856] ACPI: \_SB_.PLTF.C00C: Found 3 idle states
[ 0.426949] ACPI: \_SB_.PLTF.C00E: Found 3 idle states
[ 0.427037] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[ 0.427128] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[ 0.427242] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[ 0.427399] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[ 0.427560] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[ 0.427721] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[ 0.427877] ACPI: \_SB_.PLTF.C00D: Found 3 idle states
[ 0.428035] ACPI: \_SB_.PLTF.C00F: Found 3 idle states
[ 0.428717] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.428722] ACPI: thermal: Thermal Zone [TZ01] (20 C)
[ 0.429027] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.429155] ACPI: battery: Slot [BAT0] (battery absent)
[ 0.430715] Non-volatile memory driver v1.3
[ 0.430716] Linux agpgart interface v0.103
[ 0.494822] tpm_crb MSFT0101:00: Disabling hwrng
[ 0.495437] ACPI: bus type drm_connector registered
[ 0.497944] usbcore: registered new interface driver usbserial_generic
[ 0.497949] usbserial: USB Serial support registered for generic
[ 0.498033] rtc_cmos 00:01: RTC can wake from S4
[ 0.498358] rtc_cmos 00:01: registered as rtc0
[ 0.498389] rtc_cmos 00:01: setting system clock to 2024-03-18T08:51:00 UTC (1710751860)
[ 0.498415] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 0.504282] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.504788] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.505512] fbcon: Deferring console take-over
[ 0.505515] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.505585] hid: raw HID events driver (C) Jiri Kosina
[ 0.505785] drop_monitor: Initializing network drop monitor service
[ 0.505892] NET: Registered PF_INET6 protocol family
[ 0.633210] Freeing initrd memory: 136148K
[ 0.639799] Segment Routing with IPv6
[ 0.639803] RPL Segment Routing with IPv6
[ 0.639824] In-situ OAM (IOAM) with IPv6
[ 0.639876] NET: Registered PF_PACKET protocol family
[ 0.642225] microcode: Current revision: 0x0a704104
[ 0.643293] resctrl: L3 allocation detected
[ 0.643295] resctrl: MB allocation detected
[ 0.643296] resctrl: SMBA allocation detected
[ 0.643298] resctrl: L3 monitoring detected
[ 0.643334] IPI shorthand broadcast: enabled
[ 0.645088] sched_clock: Marking stable (644303554, 405084)->(647755882, -3047244)
[ 0.645279] registered taskstats version 1
[ 0.646206] Loading compiled-in X.509 certificates
[ 0.647904] Loaded X.509 cert 'Build time autogenerated kernel key: e341a9d144523776edd07bfeda003a968e10ac2f'
[ 0.651138] zswap: loaded using pool zstd/zsmalloc
[ 0.651488] Key type .fscrypt registered
[ 0.651489] Key type fscrypt-provisioning registered
[ 0.652251] PM: Magic number: 0:967:826
[ 0.655578] RAS: Correctable Errors collector initialized.
[ 0.656866] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP6.DEV0], AE_NOT_FOUND (20230628/psargs-330)
[ 0.656874] ACPI Error: Aborting method \_SB.GPIO._EVT due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[ 0.656880] clk: Disabling unused clocks
[ 0.657715] Freeing unused decrypted memory: 2028K
[ 0.658016] Freeing unused kernel image (initmem) memory: 3456K
[ 0.691486] Write protecting the kernel read-only data: 30720k
[ 0.692485] Freeing unused kernel image (rodata/data gap) memory: 1284K
[ 0.722754] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.722759] rodata_test: all tests were successful
[ 0.722772] Run /init as init process
[ 0.722773] with arguments:
[ 0.722774] /init
[ 0.722775] splash
[ 0.722776] with environment:
[ 0.722777] HOME=/
[ 0.722777] TERM=linux
[ 0.730640] systemd[1]: systemd 255.3-1-manjaro running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 0.730647] systemd[1]: Detected architecture x86-64.
[ 0.730651] systemd[1]: Running in initrd.
[ 0.730861] systemd[1]: Initializing machine ID from random generator.
[ 0.804496] systemd[1]: Queued start job for default target Initrd Default Target.
[ 0.833001] systemd[1]: Expecting device /dev/disk/by-label/manjaro_root...
[ 0.833166] systemd[1]: Reached target Initrd /usr File System.
[ 0.833211] systemd[1]: Reached target Slice Units.
[ 0.833234] systemd[1]: Reached target Swaps.
[ 0.833255] systemd[1]: Reached target Timer Units.
[ 0.833489] systemd[1]: Listening on Journal Socket (/dev/log).
[ 0.833634] systemd[1]: Listening on Journal Socket.
[ 0.833702] systemd[1]: Listening on udev Control Socket.
[ 0.833742] systemd[1]: Listening on udev Kernel Socket.
[ 0.833748] systemd[1]: Reached target Socket Units.
[ 0.834457] systemd[1]: Starting Create List of Static Device Nodes...
[ 0.835473] systemd[1]: Starting Journal Service...
[ 0.835910] systemd[1]: Starting Load Kernel Modules...
[ 0.836291] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 0.836677] systemd[1]: Starting Virtual Console Setup...
[ 0.839295] systemd[1]: Finished Create List of Static Device Nodes.
[ 0.843757] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 0.843817] systemd[1]: Reached target Preparation for Local File Systems.
[ 0.843825] systemd[1]: Reached target Local File Systems.
[ 0.844620] systemd[1]: Finished Load Kernel Modules.
[ 0.845199] systemd-journald[230]: Collecting audit messages is disabled.
[ 0.845208] systemd[1]: Starting Apply Kernel Variables...
[ 0.848766] systemd[1]: Finished Virtual Console Setup.
[ 0.849409] systemd[1]: Starting dracut ask for additional cmdline parameters...
[ 0.852135] systemd[1]: Finished Apply Kernel Variables.
[ 0.866565] systemd[1]: Started Journal Service.
[ 1.005841] raid6: skipped pq benchmark and selected avx512x4
[ 1.005845] raid6: using avx512x2 recovery algorithm
[ 1.007950] xor: automatically using best checksumming function avx
[ 1.066168] Btrfs loaded, zoned=yes, fsverity=yes
[ 1.240336] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 1.240440] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 1.240565] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 1.243091] cryptd: max_cpu_qlen set to 1000
[ 1.245285] ccp 0000:c3:00.2: enabling device (0000 -> 0002)
[ 1.246821] ccp 0000:c3:00.2: tee enabled
[ 1.247243] ccp 0000:c3:00.2: psp enabled
[ 1.390315] input: FTCS1000:00 2808:8206 Touchscreen as /devices/platform/AMDI0010:01/i2c-1/i2c-FTCS1000:00/0018:2808:8206.0001/input/input1
[ 1.390443] input: FTCS1000:00 2808:8206 Stylus as /devices/platform/AMDI0010:01/i2c-1/i2c-FTCS1000:00/0018:2808:8206.0001/input/input3
[ 1.390522] hid-generic 0018:2808:8206.0001: input,hidraw0: I2C HID v1.00 Device [FTCS1000:00 2808:8206] on i2c-FTCS1000:00
[ 1.427122] tsc: Refined TSC clocksource calibration: 3293.870 MHz
[ 1.427133] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f7aadade50, max_idle_ns: 440795247678 ns
[ 1.427194] clocksource: Switched to clocksource tsc
[ 2.307115] i2c_designware AMDI0010:02: controller timed out
[ 2.307117] i2c_designware AMDI0010:00: controller timed out
[ 2.333237] i2c_designware AMDI0010:02: timeout in disabling adapter
[ 2.333245] i2c_designware AMDI0010:00: timeout in disabling adapter
[ 2.333262] hid (null): reading report descriptor failed
[ 2.333265] i2c_hid_acpi i2c-OPI0002:00: can't add hid device: -110
[ 2.333270] hid (null): reading report descriptor failed
[ 2.333273] i2c_hid_acpi i2c-OPI0001:00: can't add hid device: -110
[ 2.353557] i2c_designware AMDI0010:02: timeout waiting for bus ready
[ 2.384519] i2c_hid_acpi: probe of i2c-OPI0001:00 failed with error -110
[ 2.414521] i2c_hid_acpi: probe of i2c-OPI0002:00 failed with error -110
[ 2.418755] xhci_hcd 0000:c3:00.3: xHCI Host Controller
[ 2.418762] xhci_hcd 0000:c3:00.3: new USB bus registered, assigned bus number 1
[ 2.419208] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.419227] xhci_hcd 0000:c3:00.3: hcc params 0x0128ffc5 hci version 0x120 quirks 0x0000000200000410
[ 2.419622] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:00/input/input4
[ 2.419713] xhci_hcd 0000:c3:00.3: xHCI Host Controller
[ 2.419718] xhci_hcd 0000:c3:00.3: new USB bus registered, assigned bus number 2
[ 2.419721] xhci_hcd 0000:c3:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.419794] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 2.419799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.419802] usb usb1: Product: xHCI Host Controller
[ 2.419805] usb usb1: Manufacturer: Linux 6.8.1-1-MANJARO xhci-hcd
[ 2.419807] usb usb1: SerialNumber: 0000:c3:00.3
[ 2.419983] hub 1-0:1.0: USB hub found
[ 2.420005] hub 1-0:1.0: 5 ports detected
[ 2.420214] bmi260_core: loading out-of-tree module taints kernel.
[ 2.420219] bmi260_core: module verification failed: signature and/or required key missing - tainting kernel
[ 2.421092] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.421096] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.421840] bmi260_i2c i2c-BMI0260:00: supply vdd not found, using dummy regulator
[ 2.421850] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.421871] bmi260_i2c i2c-BMI0260:00: supply vddio not found, using dummy regulator
[ 2.426933] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.426965] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ 2.426969] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.426971] usb usb2: Product: xHCI Host Controller
[ 2.426973] usb usb2: Manufacturer: Linux 6.8.1-1-MANJARO xhci-hcd
[ 2.426974] usb usb2: SerialNumber: 0000:c3:00.3
[ 2.427089] hub 2-0:1.0: USB hub found
[ 2.427105] hub 2-0:1.0: 2 ports detected
[ 2.427339] AVX2 version of gcm_enc/dec engaged.
[ 2.427416] AES CTR mode by8 optimization enabled
[ 2.429467] xhci_hcd 0000:c3:00.4: xHCI Host Controller
[ 2.429473] xhci_hcd 0000:c3:00.4: new USB bus registered, assigned bus number 3
[ 2.429916] xhci_hcd 0000:c3:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
[ 2.430295] xhci_hcd 0000:c3:00.4: xHCI Host Controller
[ 2.430298] xhci_hcd 0000:c3:00.4: new USB bus registered, assigned bus number 4
[ 2.430301] xhci_hcd 0000:c3:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.430341] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 2.430344] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.430346] usb usb3: Product: xHCI Host Controller
[ 2.430347] usb usb3: Manufacturer: Linux 6.8.1-1-MANJARO xhci-hcd
[ 2.430349] usb usb3: SerialNumber: 0000:c3:00.4
[ 2.430457] hub 3-0:1.0: USB hub found
[ 2.430473] hub 3-0:1.0: 1 port detected
[ 2.433934] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.433958] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ 2.433960] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.433962] usb usb4: Product: xHCI Host Controller
[ 2.433963] usb usb4: Manufacturer: Linux 6.8.1-1-MANJARO xhci-hcd
[ 2.433964] usb usb4: SerialNumber: 0000:c3:00.4
[ 2.434082] hub 4-0:1.0: USB hub found
[ 2.434103] hub 4-0:1.0: 1 port detected
[ 2.434411] nvme 0000:02:00.0: platform quirk: setting simple suspend
[ 2.434494] nvme nvme0: pci function 0000:02:00.0
[ 2.435319] xhci_hcd 0000:c5:00.3: xHCI Host Controller
[ 2.435324] xhci_hcd 0000:c5:00.3: new USB bus registered, assigned bus number 5
[ 2.435649] xhci_hcd 0000:c5:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
[ 2.436197] xhci_hcd 0000:c5:00.3: xHCI Host Controller
[ 2.436200] xhci_hcd 0000:c5:00.3: new USB bus registered, assigned bus number 6
[ 2.436202] xhci_hcd 0000:c5:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.436234] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 2.436236] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.436238] usb usb5: Product: xHCI Host Controller
[ 2.436239] usb usb5: Manufacturer: Linux 6.8.1-1-MANJARO xhci-hcd
[ 2.436240] usb usb5: SerialNumber: 0000:c5:00.3
[ 2.436317] hub 5-0:1.0: USB hub found
[ 2.436328] hub 5-0:1.0: 1 port detected
[ 2.436651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.437326] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.437347] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ 2.437349] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.437351] usb usb6: Product: xHCI Host Controller
[ 2.437352] usb usb6: Manufacturer: Linux 6.8.1-1-MANJARO xhci-hcd
[ 2.437353] usb usb6: SerialNumber: 0000:c5:00.3
[ 2.437439] hub 6-0:1.0: USB hub found
[ 2.437458] hub 6-0:1.0: 1 port detected
[ 2.438815] xhci_hcd 0000:c5:00.4: xHCI Host Controller
[ 2.438819] xhci_hcd 0000:c5:00.4: new USB bus registered, assigned bus number 7
[ 2.439163] xhci_hcd 0000:c5:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
[ 2.439639] xhci_hcd 0000:c5:00.4: xHCI Host Controller
[ 2.439642] xhci_hcd 0000:c5:00.4: new USB bus registered, assigned bus number 8
[ 2.439644] xhci_hcd 0000:c5:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.439674] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 2.439676] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.439677] usb usb7: Product: xHCI Host Controller
[ 2.439678] usb usb7: Manufacturer: Linux 6.8.1-1-MANJARO xhci-hcd
[ 2.439679] usb usb7: SerialNumber: 0000:c5:00.4
[ 2.439756] hub 7-0:1.0: USB hub found
[ 2.439775] hub 7-0:1.0: 1 port detected
[ 2.440747] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.440765] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ 2.440767] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.440768] usb usb8: Product: xHCI Host Controller
[ 2.440769] usb usb8: Manufacturer: Linux 6.8.1-1-MANJARO xhci-hcd
[ 2.440770] usb usb8: SerialNumber: 0000:c5:00.4
[ 2.440849] hub 8-0:1.0: USB hub found
[ 2.440879] hub 8-0:1.0: 1 port detected
[ 2.448893] nvme nvme0: Shutdown timeout set to 8 seconds
[ 2.471764] nvme nvme0: allocated 64 MiB host memory buffer.
[ 2.520114] nvme nvme0: 12/0/0 default/read/poll queues
[ 2.531566] nvme0n1: p1 p2 p3 p4
[ 2.654181] i2c_hid_acpi i2c-FTCS1000:00: device returned incorrect report (8 vs 12 expected)
[ 2.654190] hid-multitouch 0018:2808:8206.0001: failed to fetch feature 12
[ 2.654416] input: FTCS1000:00 2808:8206 as /devices/platform/AMDI0010:01/i2c-1/i2c-FTCS1000:00/0018:2808:8206.0001/input/input6
[ 2.654540] input: FTCS1000:00 2808:8206 Stylus as /devices/platform/AMDI0010:01/i2c-1/i2c-FTCS1000:00/0018:2808:8206.0001/input/input8
[ 2.654643] hid-multitouch 0018:2808:8206.0001: input,hidraw0: I2C HID v1.00 Device [FTCS1000:00 2808:8206] on i2c-FTCS1000:00
[ 2.673757] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 2.690552] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 2.835889] usb 5-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56
[ 2.835896] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.835900] usb 5-1: Product: USB2.1 Hub
[ 2.835903] usb 5-1: Manufacturer: GenesysLogic
[ 2.841709] usb 1-4: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00
[ 2.841715] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.885421] hub 5-1:1.0: USB hub found
[ 2.886028] hub 5-1:1.0: 4 ports detected
[ 2.950640] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.953978] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.969943] usb 2-1: New USB device found, idVendor=05e3, idProduct=0764, bcdDevice=29.07
[ 2.969950] usb 2-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 2.969954] usb 2-1: Product: USB Storage
[ 2.969957] usb 2-1: Manufacturer: Generic
[ 2.969959] usb 2-1: SerialNumber: 000000002907
[ 2.973810] usb 6-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56
[ 2.973817] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.973821] usb 6-1: Product: USB3.1 Hub
[ 2.973824] usb 6-1: Manufacturer: GenesysLogic
[ 2.997847] hub 6-1:1.0: USB hub found
[ 2.998208] hub 6-1:1.0: 4 ports detected
[ 3.090451] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 3.190449] usb 5-1.1: new low-speed USB device number 3 using xhci_hcd
[ 3.254758] usb 1-5: unable to read config index 0 descriptor/start: -71
[ 3.254765] usb 1-5: can't read configurations, error -71
[ 3.321201] usb 5-1.1: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 3.30
[ 3.321208] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.321212] usb 5-1.1: Product: USB Keyboard
[ 3.321215] usb 5-1.1: Manufacturer: SIGMACHIP
[ 3.396449] usb 6-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[ 3.418221] usb 6-1.2: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01
[ 3.418229] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.418233] usb 6-1.2: Product: RTL9210
[ 3.418235] usb 6-1.2: Manufacturer: Realtek
[ 3.418238] usb 6-1.2: SerialNumber: 012345678904
[ 3.495708] usb 6-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 3.650014] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.650138] scsi host0: usb-storage 2-1:1.0
[ 3.650249] usbcore: registered new interface driver usb-storage
[ 3.655034] [drm] amdgpu kernel modesetting enabled.
[ 3.655399] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:08.3/0000:c5:00.3/usb5/5-1/5-1.1/5-1.1:1.0/0003:1C4F:0002.0002/input/input9
[ 3.664862] amdgpu: Virtual CRAT table created for CPU
[ 3.664875] amdgpu: Topology: Add CPU node
[ 3.664969] amdgpu 0000:c3:00.0: enabling device (0006 -> 0007)
[ 3.665040] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0x1002:0x15BF 0xC9).
[ 3.665651] [drm] register mmio base: 0xDC500000
[ 3.665653] [drm] register mmio size: 524288
[ 3.669672] [drm] add ip block number 0 <soc21_common>
[ 3.669674] [drm] add ip block number 1 <gmc_v11_0>
[ 3.669676] [drm] add ip block number 2 <ih_v6_0>
[ 3.669677] [drm] add ip block number 3 <psp>
[ 3.669678] [drm] add ip block number 4 <smu>
[ 3.669680] [drm] add ip block number 5 <dm>
[ 3.669682] [drm] add ip block number 6 <gfx_v11_0>
[ 3.669683] [drm] add ip block number 7 <sdma_v6_0>
[ 3.669685] [drm] add ip block number 8 <vcn_v4_0>
[ 3.669686] [drm] add ip block number 9 <jpeg_v4_0>
[ 3.669688] [drm] add ip block number 10 <mes_v11_0>
[ 3.669721] amdgpu 0000:c3:00.0: amdgpu: Fetched VBIOS from VFCT
[ 3.669724] amdgpu: ATOM BIOS: 113-PHXGENERIC-001
[ 3.671027] [drm] VCN(0) encode/decode are enabled in VM mode
[ 3.671310] amdgpu 0000:c3:00.0: [drm:jpeg_v4_0_early_init [amdgpu]] JPEG decode is enabled in VM mode
[ 3.707853] amdgpu 0000:c3:00.0: vgaarb: deactivate vga console
[ 3.707859] amdgpu 0000:c3:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[ 3.707909] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 3.707930] amdgpu 0000:c3:00.0: amdgpu: VRAM: 3072M 0x0000008000000000 - 0x00000080BFFFFFFF (3072M used)
[ 3.707932] amdgpu 0000:c3:00.0: amdgpu: GART: 512M 0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[ 3.707945] [drm] Detected VRAM RAM=3072M, BAR=3072M
[ 3.707946] [drm] RAM width 128bits LPDDR5
[ 3.708183] [drm] amdgpu: 3072M of VRAM memory ready
[ 3.708187] [drm] amdgpu: 6344M of GTT memory ready.
[ 3.708205] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.708729] [drm] PCIE GART of 512M enabled (table at 0x0000008000900000).
[ 3.709204] [drm] Loading DMUB firmware via PSP: version=0x08003300
[ 3.709536] [drm] Found VCN firmware Version ENC: 1.12 DEC: 5 VEP: 0 Revision: 0
[ 3.709541] amdgpu 0000:c3:00.0: amdgpu: Will use PSP to load VCN firmware
[ 3.710794] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:c5:00.3-1.1/input0
[ 3.715724] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.3/0000:c5:00.3/usb5/5-1/5-1.1/5-1.1:1.1/0003:1C4F:0002.0003/input/input10
[ 3.733962] [drm] reserve 0x4a00000 from 0x80b0000000 for PSP TMR
[ 3.770704] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:08.3/0000:c5:00.3/usb5/5-1/5-1.1/5-1.1:1.1/0003:1C4F:0002.0003/input/input11
[ 3.771056] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:c5:00.3-1.1/input1
[ 3.771125] usbcore: registered new interface driver usbhid
[ 3.771129] usbhid: USB HID core driver
[ 3.771139] usb 6-1.4: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
[ 3.771149] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.771155] usb 6-1.4: Product: AX88179A
[ 3.771159] usb 6-1.4: Manufacturer: ASIX
[ 3.771162] usb 6-1.4: SerialNumber: 006B8A5F
[ 4.063796] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 4.174626] scsi host1: uas
[ 4.174708] usbcore: registered new interface driver uas
[ 4.178842] scsi 1:0:0:0: Direct-Access Realtek RTL9210 NVME 1.00 PQ: 0 ANSI: 6
[ 4.217323] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.218788] sd 1:0:0:0: [sda] Write Protect is off
[ 4.218796] sd 1:0:0:0: [sda] Mode Sense: 37 00 00 08
[ 4.222072] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.223263] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 4.223268] sd 1:0:0:0: [sda] Optimal transfer size 33553920 bytes
[ 4.231649] usb 1-5: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10
[ 4.231664] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.231669] usb 1-5: Product: USB Controller
[ 4.231673] usb 1-5: Manufacturer:
[ 4.231676] usb 1-5: SerialNumber: 32869681
[ 4.236455] sda: sda1 sda2
[ 4.236619] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.269800] input: USB Controller as /devices/pci0000:00/0000:00:08.1/0000:c3:00.3/usb1/1-5/1-5:1.1/0003:045E:028E.0004/input/input12
[ 4.282289] amdgpu 0000:c3:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 4.290414] amdgpu 0000:c3:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 4.290418] amdgpu 0000:c3:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 4.313989] amdgpu 0000:c3:00.0: amdgpu: SMU is initialized successfully!
[ 4.314023] [drm] Seamless boot condition check passed
[ 4.315184] [drm] Display Core v3.2.266 initialized on DCN 3.1.4
[ 4.315186] [drm] DP-HDMI FRL PCON supported
[ 4.317671] [drm] DMUB hardware initialized: version=0x08003300
[ 4.324025] hid-generic 0003:045E:028E.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Controller] on usb-0000:c3:00.3-5/input1
[ 4.391303] [drm] PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 4.393431] [drm] kiq ring mec 3 pipe 1 q 0
[ 4.396047] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 4.396081] amdgpu 0000:c3:00.0: [drm:jpeg_v4_0_hw_init [amdgpu]] JPEG decode initialized successfully.
[ 4.425819] amdgpu: HMM registered 3072MB device memory
[ 4.427244] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 4.427260] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[ 4.427864] amdgpu: Virtual CRAT table created for GPU
[ 4.428037] amdgpu: Topology: Add dGPU node [0x15bf:0x1002]
[ 4.428040] kfd kfd: amdgpu: added device 1002:15bf
[ 4.428054] amdgpu 0000:c3:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
[ 4.428061] amdgpu 0000:c3:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 4.428063] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 4.428065] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 4.428068] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 4.428069] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 4.428071] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 4.428073] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 4.428075] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 4.428076] amdgpu 0000:c3:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 4.428078] amdgpu 0000:c3:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 4.428080] amdgpu 0000:c3:00.0: amdgpu: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 4.428082] amdgpu 0000:c3:00.0: amdgpu: ring jpeg_dec uses VM inv eng 1 on hub 8
[ 4.428084] amdgpu 0000:c3:00.0: amdgpu: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[ 4.429470] [drm] ring gfx_32768.1.1 was added
[ 4.429792] [drm] ring compute_32768.2.2 was added
[ 4.430097] [drm] ring sdma_32768.3.3 was added
[ 4.430132] [drm] ring gfx_32768.1.1 ib test pass
[ 4.430167] [drm] ring compute_32768.2.2 ib test pass
[ 4.430197] [drm] ring sdma_32768.3.3 ib test pass
[ 4.433263] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:c3:00.0 on minor 1
[ 4.438122] fbcon: amdgpudrmfb (fb0) is primary device
[ 4.438124] fbcon: Deferring console take-over
[ 4.438126] amdgpu 0000:c3:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 4.515477] [drm] DSC precompute is not needed.
[ 4.599827] BTRFS: device label manjaro_root devid 1 transid 542 /dev/sda2 scanned by mount (566)
[ 4.600338] BTRFS info (device sda2): first mount of filesystem 0cd726df-56bc-4991-a7b4-28711509de6f
[ 4.600368] BTRFS info (device sda2): using crc32c (crc32c-intel) checksum algorithm
[ 4.600376] BTRFS info (device sda2): using free-space-tree
[ 4.655294] scsi 0:0:0:0: Direct-Access Generic MassStorageClass 2907 PQ: 0 ANSI: 6
[ 4.656086] sd 0:0:0:0: [sdb] Media removed, stopped polling
[ 4.656334] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 4.875327] systemd-journald[230]: Received SIGTERM from PID 1 (systemd).
[ 5.097157] systemd[1]: systemd 255.4-2-manjaro running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 5.097163] systemd[1]: Detected architecture x86-64.
[ 5.097676] systemd[1]: Hostname set to <manjaro>.
[ 5.790897] systemd[1]: bpf-lsm: LSM BPF program attached
[ 6.160563] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ 6.160654] systemd[1]: Stopped Switch Root.
[ 6.161175] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 6.161401] systemd[1]: Created slice Slice /system/dirmngr.
[ 6.161612] systemd[1]: Created slice Slice /system/getty.
[ 6.161800] systemd[1]: Created slice Slice /system/gpg-agent.
[ 6.161979] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 6.162155] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 6.162336] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 6.162510] systemd[1]: Created slice Slice /system/keyboxd.
[ 6.162655] systemd[1]: Created slice User and Session Slice.
[ 6.162670] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ 6.162707] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.162833] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.162850] systemd[1]: Expecting device /dev/disk/by-label/manjaro_esp...
[ 6.162859] systemd[1]: Expecting device /dev/disk/by-label/manjaro_root...
[ 6.162872] systemd[1]: Reached target Local Encrypted Volumes.
[ 6.162883] systemd[1]: Reached target Login Prompts.
[ 6.162900] systemd[1]: Stopped target Switch Root.
[ 6.162911] systemd[1]: Stopped target Initrd File Systems.
[ 6.162922] systemd[1]: Stopped target Initrd Root File System.
[ 6.162932] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 6.162946] systemd[1]: Reached target Path Units.
[ 6.162958] systemd[1]: Reached target Remote File Systems.
[ 6.162969] systemd[1]: Reached target Slice Units.
[ 6.162985] systemd[1]: Reached target Local Verity Protected Volumes.
[ 6.163031] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.163630] systemd[1]: Listening on Process Core Dump Socket.
[ 6.163662] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.164120] systemd[1]: Listening on udev Control Socket.
[ 6.164199] systemd[1]: Listening on udev Kernel Socket.
[ 6.164268] systemd[1]: Listening on User Database Manager Socket.
[ 6.227770] systemd[1]: Mounting Huge Pages File System...
[ 6.229147] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.229633] systemd[1]: Mounting Kernel Debug File System...
[ 6.230048] systemd[1]: Mounting Kernel Trace File System...
[ 6.230637] systemd[1]: Starting Create List of Static Device Nodes...
[ 6.231059] systemd[1]: Starting Load Kernel Module configfs...
[ 6.231572] systemd[1]: Starting Load Kernel Module dm_mod...
[ 6.232047] systemd[1]: Starting Load Kernel Module drm...
[ 6.232564] systemd[1]: Starting Load Kernel Module fuse...
[ 6.233280] systemd[1]: Starting Load Kernel Module loop...
[ 6.233322] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ 6.233370] systemd[1]: Stopped Plymouth switch root service.
[ 6.233475] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[ 6.233517] systemd[1]: Stopped File System Check on Root Device.
[ 6.235235] systemd[1]: Starting Journal Service...
[ 6.236141] systemd[1]: Starting Load Kernel Modules...
[ 6.236174] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.236821] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.236873] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.237463] systemd[1]: Starting Coldplug All udev Devices...
[ 6.238344] systemd[1]: Mounted Huge Pages File System.
[ 6.238471] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.238580] systemd[1]: Mounted Kernel Debug File System.
[ 6.238681] systemd[1]: Mounted Kernel Trace File System.
[ 6.238897] systemd[1]: Finished Create List of Static Device Nodes.
[ 6.239153] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 6.239281] systemd[1]: Finished Load Kernel Module configfs.
[ 6.239531] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 6.239658] systemd[1]: Finished Load Kernel Module drm.
[ 6.240396] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 6.243505] loop: module loaded
[ 6.244043] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 6.244181] systemd[1]: Finished Load Kernel Module loop.
[ 6.245974] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 6.246715] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 6.248109] device-mapper: uevent: version 1.0.3
[ 6.248208] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 6.248250] systemd-journald[641]: Collecting audit messages is disabled.
[ 6.249092] i2c_dev: i2c /dev entries driver
[ 6.249225] fuse: init (API version 7.39)
[ 6.249325] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 6.249488] systemd[1]: Finished Load Kernel Module dm_mod.
[ 6.249609] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 6.249853] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 6.249989] systemd[1]: Finished Load Kernel Module fuse.
[ 6.250779] systemd[1]: Mounting FUSE Control File System...
[ 6.252781] systemd[1]: Started Journal Service.
[ 6.437670] mousedev: PS/2 mouse device common for all mice
[ 6.474161] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:c3:00.3/usb1/1-5/1-5:1.0/input/input13
[ 6.476859] usbcore: registered new interface driver xpad
[ 6.500868] amd-tee driver initialization successful
[ 6.501627] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.501631] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 6.505087] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 6.505097] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.514896] ACPI: bus type thunderbolt registered
[ 6.524863] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 6.524868] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.558071] Bluetooth: Core ver 2.22
[ 6.558118] NET: Registered PF_BLUETOOTH protocol family
[ 6.558120] Bluetooth: HCI device and connection manager initialized
[ 6.558125] Bluetooth: HCI socket layer initialized
[ 6.558129] Bluetooth: L2CAP socket layer initialized
[ 6.558134] Bluetooth: SCO socket layer initialized
[ 6.558795] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.558992] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.559106] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 6.560278] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.560283] cfg80211: failed to load regulatory.db
[ 6.562449] usbcore: registered new interface driver cdc_ether
[ 6.566544] snd_pci_acp6x 0000:c3:00.5: enabling device (0000 -> 0002)
[ 6.585453] amd-pmf AMDI0102:00: registered PMF device successfully
[ 6.625478] Intel(R) Wireless WiFi driver for Linux
[ 6.625885] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.637927] iwlwifi 0000:01:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
[ 6.637978] iwlwifi 0000:01:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
[ 6.647765] iwlwifi 0000:01:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
[ 6.648124] iwlwifi 0000:01:00.0: loaded firmware version 86.fb5c9aeb.0 ty-a0-gf-a0-86.ucode op_mode iwlmvm
[ 6.665317] systemd-journald[641]: Received client request to flush runtime journal.
[ 6.672065] Adding 6291452k swap on /var/swapfile. Priority:-2 extents:1 across:6291452k
[ 6.679253] pps_core: LinuxPPS API ver. 1 registered
[ 6.679256] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 6.686224] PTP clock support registered
[ 6.687044] usbcore: registered new interface driver btusb
[ 6.689674] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.691423] kvm_amd: TSC scaling supported
[ 6.691426] kvm_amd: Nested Virtualization enabled
[ 6.691427] kvm_amd: Nested Paging enabled
[ 6.691434] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 6.691435] kvm_amd: Virtual GIF supported
[ 6.691435] kvm_amd: Virtual NMI enabled
[ 6.691436] kvm_amd: LBR virtualization supported
[ 6.691644] Bluetooth: hci0: Device revision is 0
[ 6.691648] Bluetooth: hci0: Secure boot is enabled
[ 6.691651] Bluetooth: hci0: OTP lock is enabled
[ 6.691653] Bluetooth: hci0: API lock is enabled
[ 6.691655] Bluetooth: hci0: Debug lock is disabled
[ 6.691657] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 6.691660] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
[ 6.691666] Bluetooth: hci0: No support for _PRR ACPI method
[ 6.699600] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi
[ 6.699626] Bluetooth: hci0: Boot Address: 0x100800
[ 6.699629] Bluetooth: hci0: Firmware Version: 60-48.23
[ 6.700567] systemd-journald[641]: /var/log/journal/80a7a28a793a4be69c916431207c4502/system.journal: Journal file uses a different sequence number ID, rotating.
[ 6.700574] systemd-journald[641]: Rotating system journal.
[ 6.701451] snd_hda_intel 0000:c3:00.1: enabling device (0000 -> 0002)
[ 6.701512] snd_hda_intel 0000:c3:00.1: Handle vga_switcheroo audio client
[ 6.701607] snd_hda_intel 0000:c3:00.6: enabling device (0000 -> 0002)
[ 6.723417] snd_hda_intel 0000:c3:00.1: bound 0000:c3:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 6.741967] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:c3:00.1/sound/card0/input15
[ 6.742136] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:c3:00.1/sound/card0/input16
[ 6.742286] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:c3:00.1/sound/card0/input17
[ 6.742429] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:c3:00.1/sound/card0/input18
[ 6.755917] cdc_ncm 6-1.4:2.0: MAC-Address: 20:7b:d2:6b:8a:5f
[ 6.755927] cdc_ncm 6-1.4:2.0: setting rx_max = 16384
[ 6.768934] cdc_ncm 6-1.4:2.0: setting tx_max = 16384
[ 6.779147] cdc_ncm 6-1.4:2.0 eth0: register 'cdc_ncm' at usb-0000:c5:00.3-1.4, CDC NCM (NO ZLP), 20:7b:d2:6b:8a:5f
[ 6.779202] usbcore: registered new interface driver cdc_ncm
[ 6.790081] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.790086] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.790087] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 6.790089] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.790090] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.790091] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 6.790092] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 6.800214] intel_rapl_common: Found RAPL domain package
[ 6.800219] intel_rapl_common: Found RAPL domain core
[ 6.800700] usbcore: registered new interface driver cdc_wdm
[ 6.803913] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:c3:00.6/sound/card1/input19
[ 6.803984] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:c3:00.6/sound/card1/input20
[ 6.809461] usbcore: registered new interface driver cdc_mbim
[ 6.815885] iwlwifi 0000:01:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
[ 6.815956] thermal thermal_zone1: failed to read out thermal zone (-61)
[ 6.826044] iwlwifi 0000:01:00.0: WRT: Invalid buffer destination
[ 6.996202] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 6.996272] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 6.996330] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x90
[ 6.996388] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 6.997614] iwlwifi 0000:01:00.0: loaded PNVM version e28bb9d7
[ 7.013123] iwlwifi 0000:01:00.0: Detected RF GF, rfid=0x10d000
[ 7.084342] iwlwifi 0000:01:00.0: base HW address: c8:15:4e:49:21:e0
[ 7.103781] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[ 7.414164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.414168] Bluetooth: BNEP filters: protocol multicast
[ 7.414173] Bluetooth: BNEP socket layer initialized
[ 7.583865] iwlwifi 0000:01:00.0: WRT: Invalid buffer destination
[ 7.648801] systemd-journald[641]: /var/log/journal/80a7a28a793a4be69c916431207c4502/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ 7.729738] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.739971] ntfs3: Max link count 4000
[ 7.739974] ntfs3: Enabled Linux POSIX ACLs support
[ 7.739974] ntfs3: Read-only LZX/Xpress compression included
[ 7.746432] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 7.746479] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 7.746521] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x90
[ 7.746563] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 7.839149] iwlwifi 0000:01:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 7.897167] Bluetooth: hci0: Waiting for firmware download to complete
[ 7.898427] Bluetooth: hci0: Firmware loaded in 1170722 usecs
[ 7.898566] Bluetooth: hci0: Waiting for device to boot
[ 7.926673] Bluetooth: hci0: Device booted in 27542 usecs
[ 7.926682] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[ 7.926891] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc
[ 7.935158] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 7.940271] iwlwifi 0000:01:00.0: WRT: Invalid buffer destination
[ 7.943701] Bluetooth: hci0: Firmware timestamp 2023.48 buildtype 1 build 75324
[ 7.943709] Bluetooth: hci0: Firmware SHA1: 0x23bac558
[ 8.110162] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 8.110234] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 8.110292] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x90
[ 8.110349] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 8.191475] Bluetooth: MGMT ver 1.22
[ 8.197620] NET: Registered PF_ALG protocol family
[ 12.050739] wlp1s0: authenticate with 48:b2:5d:44:53:7c (local address=c8:15:4e:49:21:e0)
[ 12.052476] wlp1s0: send auth to 48:b2:5d:44:53:7c (try 1/3)
[ 12.085999] wlp1s0: authenticated
[ 12.087105] wlp1s0: associate with 48:b2:5d:44:53:7c (try 1/3)
[ 12.089003] wlp1s0: RX AssocResp from 48:b2:5d:44:53:7c (capab=0x1531 status=0 aid=56)
[ 12.105738] wlp1s0: associated
[ 12.172951] wlp1s0: Limiting TX power to 26 (26 - 0) dBm as advertised by 48:b2:5d:44:53:7c
[ 13.676490] input: Handheld Controller as /devices/virtual/input/input21
[ 14.415021] Bluetooth: RFCOMM TTY layer initialized
[ 14.415042] Bluetooth: RFCOMM socket layer initialized
[ 14.415046] Bluetooth: RFCOMM ver 1.11
[ 15.561870] input: Handheld Controller as /devices/virtual/input/input22
[ 15.562087] input: OpenGamepadUI Mouse as /devices/virtual/input/input23
[ 15.653039] input: Microsoft X-Box 360 pad as /devices/virtual/input/input24
[ 15.653273] input: OpenGamepadUI Mouse as /devices/virtual/input/input25
[ 27.139125] ntfs3: nvme0n1p3: ino=198a8, Correct links count -> 1.
[ 32.100208] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 32.421907] input: Microsoft X-Box 360 pad 0 as /devices/virtual/input/input26
[ 32.725779] input: Microsoft X-Box 360 pad 1 as /devices/virtual/input/input27
[ 47.572043] systemd-journald[641]: Time jumped backwards, rotating.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-03-18 10:58 [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110 Philip Müller
@ 2024-03-19 4:52 ` Philip Müller
2024-03-22 11:01 ` Linux regression tracking (Thorsten Leemhuis)
2024-03-27 10:31 ` Hans de Goede
0 siblings, 2 replies; 13+ messages in thread
From: Philip Müller @ 2024-03-19 4:52 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, Hans de Goede
[-- Attachment #1: Type: text/plain, Size: 1009 bytes --]
On 18/03/2024 17:58, Philip Müller wrote:
> I'm currently developing on the OrangePi Neo-01, which ships with two
> similar touchpads using the Synaptics driver. On 6.7.10 those two
> devices get detected normally. On 6.8.1 it seems to error out.
>
> I either get none, or at best only one of those two devices.
>
> i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
> i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
>
> what would be the best way to debug this?
>
I found the regression in commit aa69d6974185e9f7a552ba982540a38e34f69690
HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling
When I use the commit before I can rmmod and modprobe in a batch script
using a loop without erroring out to -110. Attached the testing script
and dmesg log snippets
#!/bin/bash
for ((n=0;n<5;n++))
do
sudo rmmod i2c_hid_acpi
sleep 1
sudo modprobe i2c_hid_acpi --force-vermagic
sleep 2
done
I will try to use the code of 6.8.1 and revert that commit.
--
Best, Philip
[-- Attachment #2: regression-i2c.txt --]
[-- Type: text/plain, Size: 20924 bytes --]
Errors with https://github.com/torvalds/linux/commit/af93a167eda90192563bce64c4bb989836afac1f
[ 3008.790912] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.008F/input/input353
[ 3008.791171] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.008F/input/input354
[ 3008.791419] hid-multitouch 0018:0911:5288.008F: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3008.797498] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0090/input/input355
[ 3008.797669] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0090/input/input356
[ 3008.797864] hid-multitouch 0018:0911:5288.0090: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3012.606771] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0092/input/input360
[ 3012.606908] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0092/input/input361
[ 3012.607057] hid-multitouch 0018:0911:5288.0092: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3013.470476] i2c_hid_acpi i2c-OPI0001:00: can't add hid device: -110
[ 3013.524540] i2c_hid_acpi: probe of i2c-OPI0001:00 failed with error -110
[ 3017.196513] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.0094/input/input365
[ 3017.196824] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.0094/input/input366
[ 3017.197175] hid-multitouch 0018:0911:5288.0094: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3017.199658] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0095/input/input367
[ 3017.199760] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0095/input/input368
[ 3017.199826] hid-multitouch 0018:0911:5288.0095: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3020.999460] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.0097/input/input372
[ 3020.999552] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0098/input/input374
[ 3020.999673] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.0097/input/input373
[ 3020.999823] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.0098/input/input375
[ 3020.999944] hid-multitouch 0018:0911:5288.0097: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3021.000048] hid-multitouch 0018:0911:5288.0098: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3025.789683] i2c_hid_acpi i2c-OPI0002:00: can't add hid device: -110
[ 3025.792247] i2c_hid_acpi i2c-OPI0001:00: can't add hid device: -110
[ 3025.856860] i2c_hid_acpi: probe of i2c-OPI0001:00 failed with error -110
[ 3025.893633] i2c_hid_acpi: probe of i2c-OPI0002:00 failed with error -110
[ 3038.880093] i2c_hid_acpi i2c-OPI0002:00: can't add hid device: -110
[ 3038.884960] i2c_hid_acpi i2c-OPI0001:00: can't add hid device: -110
[ 3038.938955] i2c_hid_acpi: probe of i2c-OPI0002:00 failed with error -110
[ 3038.945724] i2c_hid_acpi: probe of i2c-OPI0001:00 failed with error -110
[ 3042.494261] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.009D/input/input385
[ 3042.494436] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.009C/input/input387
[ 3042.494526] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.009D/input/input386
[ 3042.494807] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.009C/input/input388
[ 3042.494975] hid-multitouch 0018:0911:5288.009D: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3042.495104] hid-multitouch 0018:0911:5288.009C: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3046.400593] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.009E/input/input389
[ 3046.400797] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.009E/input/input390
[ 3046.401017] hid-multitouch 0018:0911:5288.009E: input,hidraw0: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3047.254001] i2c_hid_acpi i2c-OPI0001:00: can't add hid device: -110
[ 3047.338357] i2c_hid_acpi: probe of i2c-OPI0001:00 failed with error -110
[ 3054.806603] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.009F/input/input391
[ 3054.806881] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00A0/input/input393
[ 3054.806976] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.009F/input/input392
[ 3054.807170] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00A0/input/input394
[ 3054.807341] hid-multitouch 0018:0911:5288.009F: input,hidraw0: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3054.807520] hid-multitouch 0018:0911:5288.00A0: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3064.452881] i2c_hid_acpi i2c-OPI0002:00: can't add hid device: -110
[ 3064.456850] i2c_hid_acpi i2c-OPI0001:00: can't add hid device: -110
[ 3064.517131] i2c_hid_acpi: probe of i2c-OPI0002:00 failed with error -110
[ 3064.533487] i2c_hid_acpi: probe of i2c-OPI0001:00 failed with error -110
[ 3082.597720] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00A2/input/input398
[ 3082.597901] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00A2/input/input399
[ 3082.597951] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00A3/input/input400
[ 3082.598069] hid-multitouch 0018:0911:5288.00A2: input,hidraw0: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3082.598485] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00A3/input/input401
[ 3082.598950] hid-multitouch 0018:0911:5288.00A3: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3092.182446] i2c_hid_acpi i2c-OPI0001:00: can't add hid device: -110
[ 3092.183473] i2c_hid_acpi i2c-OPI0002:00: can't add hid device: -110
[ 3092.227784] i2c_hid_acpi: probe of i2c-OPI0002:00 failed with error -110
[ 3092.241669] i2c_hid_acpi: probe of i2c-OPI0001:00 failed with error -110
[ 3095.759747] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00A6/input/input408
[ 3095.759919] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00A6/input/input409
[ 3095.760098] hid-multitouch 0018:0911:5288.00A6: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3096.610008] i2c_hid_acpi i2c-OPI0002:00: can't add hid device: -110
[ 3096.710767] i2c_hid_acpi: probe of i2c-OPI0002:00 failed with error -110
[ 3101.302732] i2c_hid_acpi i2c-OPI0002:00: can't add hid device: -110
[ 3101.302945] i2c_hid_acpi i2c-OPI0001:00: can't add hid device: -110
[ 3101.390289] i2c_hid_acpi: probe of i2c-OPI0002:00 failed with error -110
[ 3101.416972] i2c_hid_acpi: probe of i2c-OPI0001:00 failed with error -110
[ 3104.932305] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00A8/input/input413
[ 3104.932507] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00A8/input/input414
[ 3104.932660] hid-multitouch 0018:0911:5288.00A8: input,hidraw0: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3105.785640] i2c_hid_acpi i2c-OPI0002:00: can't add hid device: -110
[ 3105.873322] i2c_hid_acpi: probe of i2c-OPI0002:00 failed with error -110
Fine with https://github.com/torvalds/linux/commit/aa69d6974185e9f7a552ba982540a38e34f69690
[ 3155.416063] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00AA/input/input418
[ 3155.416167] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00AA/input/input419
[ 3155.416178] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00AB/input/input420
[ 3155.416249] hid-multitouch 0018:0911:5288.00AA: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3155.416341] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00AB/input/input421
[ 3155.416459] hid-multitouch 0018:0911:5288.00AB: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3159.412480] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00AD/input/input425
[ 3159.412620] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00AD/input/input426
[ 3159.412793] hid-multitouch 0018:0911:5288.00AD: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3159.412936] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00AE/input/input427
[ 3159.413153] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00AE/input/input428
[ 3159.413342] hid-multitouch 0018:0911:5288.00AE: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3163.232539] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00B0/input/input432
[ 3163.232855] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00B0/input/input433
[ 3163.233222] hid-multitouch 0018:0911:5288.00B0: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3163.235194] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00B1/input/input434
[ 3163.235299] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00B1/input/input435
[ 3163.235385] hid-multitouch 0018:0911:5288.00B1: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3167.138382] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00B3/input/input439
[ 3167.138470] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00B4/input/input441
[ 3167.138541] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00B3/input/input440
[ 3167.138636] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00B4/input/input442
[ 3167.138826] hid-multitouch 0018:0911:5288.00B3: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3167.138902] hid-multitouch 0018:0911:5288.00B4: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3171.038312] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00B6/input/input446
[ 3171.038416] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00B6/input/input447
[ 3171.038509] hid-multitouch 0018:0911:5288.00B6: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3171.038764] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00B7/input/input448
[ 3171.039029] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00B7/input/input449
[ 3171.039303] hid-multitouch 0018:0911:5288.00B7: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3176.144371] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00B9/input/input453
[ 3176.144490] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00B9/input/input454
[ 3176.144581] hid-multitouch 0018:0911:5288.00B9: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3176.144619] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00BA/input/input455
[ 3176.144782] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00BA/input/input456
[ 3176.144967] hid-multitouch 0018:0911:5288.00BA: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3179.994328] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00BC/input/input460
[ 3179.994386] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00BD/input/input462
[ 3179.994524] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00BC/input/input461
[ 3179.994653] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00BD/input/input463
[ 3179.994976] hid-multitouch 0018:0911:5288.00BC: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3179.995119] hid-multitouch 0018:0911:5288.00BD: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3183.940584] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00BF/input/input467
[ 3183.940818] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00BF/input/input468
[ 3183.940955] hid-multitouch 0018:0911:5288.00BF: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3183.943668] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00C0/input/input469
[ 3183.943743] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00C0/input/input470
[ 3183.943811] hid-multitouch 0018:0911:5288.00C0: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3187.886502] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00C2/input/input474
[ 3187.886587] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00C2/input/input475
[ 3187.886658] hid-multitouch 0018:0911:5288.00C2: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3187.886999] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00C3/input/input476
[ 3187.887179] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00C3/input/input477
[ 3187.887359] hid-multitouch 0018:0911:5288.00C3: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3191.689758] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00C5/input/input481
[ 3191.690052] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00C5/input/input482
[ 3191.690413] hid-multitouch 0018:0911:5288.00C5: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3191.693215] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00C6/input/input483
[ 3191.693353] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00C6/input/input484
[ 3191.693513] hid-multitouch 0018:0911:5288.00C6: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3197.842522] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00C8/input/input488
[ 3197.842605] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00C9/input/input490
[ 3197.842821] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00C8/input/input489
[ 3197.842940] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00C9/input/input491
[ 3197.843137] hid-multitouch 0018:0911:5288.00C8: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3197.843202] hid-multitouch 0018:0911:5288.00C9: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3201.712374] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00CB/input/input495
[ 3201.712472] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00CC/input/input497
[ 3201.712569] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00CB/input/input496
[ 3201.712713] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00CC/input/input498
[ 3201.712847] hid-multitouch 0018:0911:5288.00CB: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3201.712898] hid-multitouch 0018:0911:5288.00CC: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3205.632267] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00CE/input/input502
[ 3205.632522] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00CE/input/input503
[ 3205.632926] hid-multitouch 0018:0911:5288.00CE: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3205.635642] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00CF/input/input504
[ 3205.635729] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00CF/input/input505
[ 3205.635832] hid-multitouch 0018:0911:5288.00CF: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3209.604485] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00D1/input/input509
[ 3209.604647] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00D1/input/input510
[ 3209.604917] hid-multitouch 0018:0911:5288.00D1: input,hidraw4: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
[ 3209.605419] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00D2/input/input511
[ 3209.605672] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00D2/input/input512
[ 3209.605913] hid-multitouch 0018:0911:5288.00D2: input,hidraw5: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3213.534413] input: OPI0001:00 0911:5288 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00D4/input/input516
[ 3213.534580] input: OPI0002:00 0911:5288 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00D5/input/input518
[ 3213.534596] input: OPI0001:00 0911:5288 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-OPI0001:00/0018:0911:5288.00D4/input/input517
[ 3213.534887] input: OPI0002:00 0911:5288 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-OPI0002:00/0018:0911:5288.00D5/input/input519
[ 3213.534957] hid-multitouch 0018:0911:5288.00D4: input,hidraw4: I2C HID v1.00 Mouse [OPI0001:00 0911:5288] on i2c-OPI0001:00
[ 3213.535078] hid-multitouch 0018:0911:5288.00D5: input,hidraw5: I2C HID v1.00 Mouse [OPI0002:00 0911:5288] on i2c-OPI0002:00
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-03-19 4:52 ` Philip Müller
@ 2024-03-22 11:01 ` Linux regression tracking (Thorsten Leemhuis)
2024-03-27 10:31 ` Hans de Goede
1 sibling, 0 replies; 13+ messages in thread
From: Linux regression tracking (Thorsten Leemhuis) @ 2024-03-22 11:01 UTC (permalink / raw)
To: Philip Müller, Hans de Goede
Cc: Jiri Kosina, Linux kernel regressions list, Benjamin Tissoires,
open list:HID CORE LAYER, LKML
[BCCed Greg and the stable list, as this is apparently a mainline
regression and has nothing to do with the stable series
Also CCing Jiri, Benjamin as well as various lists]
On 19.03.24 05:52, Philip Müller wrote:
> On 18/03/2024 17:58, Philip Müller wrote:
>> I'm currently developing on the OrangePi Neo-01, which ships with two
>> similar touchpads using the Synaptics driver. On 6.7.10 those two
>> devices get detected normally. On 6.8.1 it seems to error out.
Thx or the report.
>> I either get none, or at best only one of those two devices.
>>
>> i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
>> i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
>
> I found the regression in commit aa69d6974185e9f7a552ba982540a38e34f69690
> HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling
FWIW, that's a change from Hans. He is normally quite responsive, but as
he has not replied yet I guess he is AFK for a few days.
Ciao, Thorsten
> When I use the commit before I can rmmod and modprobe in a batch script
> using a loop without erroring out to -110. Attached the testing script
> and dmesg log snippets
>
> #!/bin/bash
> for ((n=0;n<5;n++))
> do
> sudo rmmod i2c_hid_acpi
> sleep 1
> sudo modprobe i2c_hid_acpi --force-vermagic
> sleep 2
> done
>
> I will try to use the code of 6.8.1 and revert that commit.
P.S.: To be sure the issue doesn't fall through the cracks unnoticed,
I'm adding it to regzbot, the Linux kernel regression tracking bot:
#regzbot report /
#regzbot introduced aa69d6974185e9f7a552ba982540a38e34f69690
#regzbot title HID: i2c-hid: probe of i2c-XXX0001:00 failed with error -110
#regzbot ignore-activity
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-03-19 4:52 ` Philip Müller
2024-03-22 11:01 ` Linux regression tracking (Thorsten Leemhuis)
@ 2024-03-27 10:31 ` Hans de Goede
2024-03-27 15:47 ` Philip Müller
1 sibling, 1 reply; 13+ messages in thread
From: Hans de Goede @ 2024-03-27 10:31 UTC (permalink / raw)
To: Philip Müller, stable; +Cc: Greg Kroah-Hartman
Hi Philip,
On 3/19/24 5:52 AM, Philip Müller wrote:
> On 18/03/2024 17:58, Philip Müller wrote:
>> I'm currently developing on the OrangePi Neo-01, which ships with two similar touchpads using the Synaptics driver. On 6.7.10 those two devices get detected normally. On 6.8.1 it seems to error out.
>>
>> I either get none, or at best only one of those two devices.
>>
>> i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
>> i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
>>
>> what would be the best way to debug this?
>>
>
> I found the regression in commit aa69d6974185e9f7a552ba982540a38e34f69690
> HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling
I just checked that patch and I don't see anyway how that can create
this regression. I assume you did a git bisect ?
Did you try the last commit in the tree before that commit got added
and verified that that one works where as building a kernel from commit
aa69d6974185e9f itself does not work ?
> When I use the commit before I can rmmod and modprobe in a batch script using a loop without erroring out to -110. Attached the testing script and dmesg log snippets
>
> #!/bin/bash
> for ((n=0;n<5;n++))
> do
> sudo rmmod i2c_hid_acpi
> sleep 1
> sudo modprobe i2c_hid_acpi --force-vermagic
> sleep 2
> done
Ok, so you did try the commit before and that did work. Are you
sure that aa69d6974185e9f was not actually the last working
commit ?
AFAICT aa69d6974185e9f makes no functional changes, except for
actually propagating the error from i2c_hid_read_register()
rather then hardcoding -EIO. But that should not matter...
Note that commit aa69d6974185e9f is part of a series and
I would not be surprised if some other commit in that series
is causing your problem, but aa69d6974185e9f itself seems
rather harmless.
Regards,
Hans
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-03-27 10:31 ` Hans de Goede
@ 2024-03-27 15:47 ` Philip Müller
2024-03-27 17:45 ` Hans de Goede
0 siblings, 1 reply; 13+ messages in thread
From: Philip Müller @ 2024-03-27 15:47 UTC (permalink / raw)
To: Hans de Goede, stable; +Cc: Greg Kroah-Hartman
On 27/03/2024 17:31, Hans de Goede wrote:
> Hi Philip,
>
> On 3/19/24 5:52 AM, Philip Müller wrote:
>> On 18/03/2024 17:58, Philip Müller wrote:
>>> I'm currently developing on the OrangePi Neo-01, which ships with two similar touchpads using the Synaptics driver. On 6.7.10 those two devices get detected normally. On 6.8.1 it seems to error out.
>>>
>>> I either get none, or at best only one of those two devices.
>>>
>>> i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
>>> i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
>>>
>>> what would be the best way to debug this?
>>>
>>
>> I found the regression in commit aa69d6974185e9f7a552ba982540a38e34f69690
>> HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling
>
> I just checked that patch and I don't see anyway how that can create
> this regression. I assume you did a git bisect ?
>
> Did you try the last commit in the tree before that commit got added
> and verified that that one works where as building a kernel from commit
> aa69d6974185e9f itself does not work ?
>
No I didn't do a git bisect actually. I did it more manually like git
bisect might do it. What I did was to compile just that module and load
it against the 6.7.10 kernel. a9f68ffe1170ca4bc17ab29067d806a354a026e0
is the last commit you find in 6.7 series. All the other commits are
part of the 6.8 series or later. So I looked at the commit titles and
picked a9f68ffe1170ca4bc17ab29067d806a354a026e0 which I compiled the
"out of tree" module. I unloaded the 6.7.10 module, copied the new
compiled one over and did the rmod, modprobe batch script to see how the
touchpads react.
Then I went to compile and tested
af93a167eda90192563bce64c4bb989836afac1f which created the issue with
-110 errors. So I went to aa69d6974185e9f7a552ba982540a38e34f69690 which
also results in the error. So I went back to
96d3098db835d58649b73a5788898bd7672a319b which still works. Since now
6.9 development started, I may try
00aab7dcb2267f2aef59447602f34501efe1a07f to see if that fixes anything.
I can get the touchpads both working in 6.8 code when I do enough tries
by a rmod/modprobe loop. Based on the logs you see, sometimes both are
up, mostly one or none is up. having only two commits of 6.7 code in the
module it works as 6.7 code. Only when "HID: i2c-hid: Switch
i2c_hid_parse() to goto style error handling" gets added I see the error
and can reproduce it on my device as shown in the log.
Before we had
hid_err(hid, "reading report descriptor failed\n");
kfree(rdesc);
followed by the hardcoded return -EIO;
Now we have an redirect to the out function but don't do kfree(rdesc) if
you hit the error anymore.
Also the last return 0; got removed. So maybe what ever error the device
might have hit before might be reverted due to return 0 or not freeing
rdesc when hitting the error might prevent it to load.
Anyhow, that patch is the first patch which changes the function in that
series. Sure it might not be able to compile the whole kernel with it. I
only tested the module based on the given code in an out of tree module
style.
So I might test 6.9rc1 on the device and let you know if that kernel has
the same issue still.
>> When I use the commit before I can rmmod and modprobe in a batch script using a loop without erroring out to -110. Attached the testing script and dmesg log snippets
>>
>> #!/bin/bash
>> for ((n=0;n<5;n++))
>> do
>> sudo rmmod i2c_hid_acpi
>> sleep 1
>> sudo modprobe i2c_hid_acpi --force-vermagic
>> sleep 2
>> done
>
> Ok, so you did try the commit before and that did work. Are you
> sure that aa69d6974185e9f was not actually the last working
> commit ?
For me 96d3098db835d58649b73a5788898bd7672a319b was the last working
code, as it doesn't change functionality.
>
> AFAICT aa69d6974185e9f makes no functional changes, except for
> actually propagating the error from i2c_hid_read_register()
> rather then hardcoding -EIO. But that should not matter...
See return 0 and kfree(rdesc) which is now missing.
> Note that commit aa69d6974185e9f is part of a series and
> I would not be surprised if some other commit in that series
> is causing your problem, but aa69d6974185e9f itself seems
> rather harmless.
Well, it might also revealed an issue, which was ignored all the time
and by erroring out it might stop the process to continue something. Cos
maybe return 0 had skipped any recorded error before.
If you want me to test or try something else, let me know. I'm open for
ideas.
>
> Regards,
>
> Hans
>
>
--
Best, Philip
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-03-27 15:47 ` Philip Müller
@ 2024-03-27 17:45 ` Hans de Goede
2024-03-29 3:40 ` Philip Müller
0 siblings, 1 reply; 13+ messages in thread
From: Hans de Goede @ 2024-03-27 17:45 UTC (permalink / raw)
To: Philip Müller, stable; +Cc: Greg Kroah-Hartman
Hi Philip,
On 3/27/24 4:47 PM, Philip Müller wrote:
> On 27/03/2024 17:31, Hans de Goede wrote:
>> Hi Philip,
>>
>> On 3/19/24 5:52 AM, Philip Müller wrote:
>>> On 18/03/2024 17:58, Philip Müller wrote:
>>>> I'm currently developing on the OrangePi Neo-01, which ships with two similar touchpads using the Synaptics driver. On 6.7.10 those two devices get detected normally. On 6.8.1 it seems to error out.
>>>>
>>>> I either get none, or at best only one of those two devices.
>>>>
>>>> i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
>>>> i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
>>>>
>>>> what would be the best way to debug this?
>>>>
>>>
>>> I found the regression in commit aa69d6974185e9f7a552ba982540a38e34f69690
>>> HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling
>>
>> I just checked that patch and I don't see anyway how that can create
>> this regression. I assume you did a git bisect ?
>>
>> Did you try the last commit in the tree before that commit got added
>> and verified that that one works where as building a kernel from commit
>> aa69d6974185e9f itself does not work ?
>>
>
> No I didn't do a git bisect actually. I did it more manually like git bisect might do it. What I did was to compile just that module and load it against the 6.7.10 kernel. a9f68ffe1170ca4bc17ab29067d806a354a026e0 is the last commit you find in 6.7 series. All the other commits are part of the 6.8 series or later. So I looked at the commit titles and picked a9f68ffe1170ca4bc17ab29067d806a354a026e0 which I compiled the "out of tree" module. I unloaded the 6.7.10 module, copied the new compiled one over and did the rmod, modprobe batch script to see how the touchpads react.
>
> Then I went to compile and tested af93a167eda90192563bce64c4bb989836afac1f which created the issue with -110 errors. So I went to aa69d6974185e9f7a552ba982540a38e34f69690 which also results in the error. So I went back to 96d3098db835d58649b73a5788898bd7672a319b which still works. Since now 6.9 development started, I may try 00aab7dcb2267f2aef59447602f34501efe1a07f to see if that fixes anything.
>
> I can get the touchpads both working in 6.8 code when I do enough tries by a rmod/modprobe loop. Based on the logs you see, sometimes both are up, mostly one or none is up. having only two commits of 6.7 code in the module it works as 6.7 code. Only when "HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling" gets added I see the error and can reproduce it on my device as shown in the log.
>
> Before we had
>
> hid_err(hid, "reading report descriptor failed\n");
> kfree(rdesc);
>
> followed by the hardcoded return -EIO;
>
> Now we have an redirect to the out function but don't do kfree(rdesc) if you hit the error anymore.
>
> Also the last return 0; got removed. So maybe what ever error the device might have hit before might be reverted due to return 0 or not freeing rdesc when hitting the error might prevent it to load.
>
> Anyhow, that patch is the first patch which changes the function in that series. Sure it might not be able to compile the whole kernel with it. I only tested the module based on the given code in an out of tree module style.
>
> So I might test 6.9rc1 on the device and let you know if that kernel has the same issue still.
>
>>> When I use the commit before I can rmmod and modprobe in a batch script using a loop without erroring out to -110. Attached the testing script and dmesg log snippets
>>>
>>> #!/bin/bash
>>> for ((n=0;n<5;n++))
>>> do
>>> sudo rmmod i2c_hid_acpi
>>> sleep 1
>>> sudo modprobe i2c_hid_acpi --force-vermagic
>>> sleep 2
>>> done
>>
>> Ok, so you did try the commit before and that did work. Are you
>> sure that aa69d6974185e9f was not actually the last working
>> commit ?
>
> For me 96d3098db835d58649b73a5788898bd7672a319b was the last working code, as it doesn't change functionality.
>
>>
>> AFAICT aa69d6974185e9f makes no functional changes, except for
>> actually propagating the error from i2c_hid_read_register()
>> rather then hardcoding -EIO. But that should not matter...
>
> See return 0 and kfree(rdesc) which is now missing.
The new code is (on error) "goto out;" and then out: looks like this:
out:
if (!use_override)
kfree(rdesc);
return ret;
Since the "goto out;" is an else branch of "if (use_override) { } else {}"
we know use_override is false here, so !use_override is true and
the kfree() still happens. Also even if that were to no longer happen that
would just be a small memleak and would not explain the probe failures
you are seeing.
As for "return 0" vs "return ret", the code at the end of i2c_hid_parse()
before commit aa69d6974185e9f looked like this:
if (ret) {
dbg_hid("parsing report descriptor failed\n");
return ret;
}
return 0;
So this would also always return ret because if ret
is non 0 we always hit if (ret) return ret; and if
ret is 0 then return 0 and return ret are functionally
the same.
So since the functionality at the end of the function did
not change, it still always ends up returning ret, but now
does it in a less circumspect way.
Which leaves just the change in the:
hid_err(hid, "reading report descriptor failed\n");
code path which used to return -EIO and now does goto out
which ends up returning ret which is the actual return
value of i2c_hid_read_register() instead of hardcoding -EIO.
I checked and nothing in the HID core treats -EIO in
a special way.
So I still do not see how commit aa69d6974185e9f can break
anything and I really wonder if you did not make a mistake
during testing.
Can you try building a clean broken kernel (the entire
kernel) and then in reverse order (of them being committed)
revert my recent i2c-hid changes 1 by one and after each
revert check if things start working again ?
And then see which is the first revert after which things
start working again, that one is the culprit and I expect
you to find a different commit then aa69d6974185e9f.
Unless I'm missing / overlooking something in commit
aa69d6974185e9f...
Note I'm going offline for a long weekend and I won't be
replying to emails until next week Tuesday.
Regards,
Hans
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-03-27 17:45 ` Hans de Goede
@ 2024-03-29 3:40 ` Philip Müller
2024-04-01 6:20 ` Linux regression tracking (Thorsten Leemhuis)
2024-04-02 8:52 ` Hans de Goede
0 siblings, 2 replies; 13+ messages in thread
From: Philip Müller @ 2024-03-29 3:40 UTC (permalink / raw)
To: Hans de Goede; +Cc: Greg Kroah-Hartman, stable
On 28/03/2024 00:45, Hans de Goede wrote:
> Hi Philip,
>
> On 3/27/24 4:47 PM, Philip Müller wrote:
>> On 27/03/2024 17:31, Hans de Goede wrote:
>>> Hi Philip,
>>>
>>> On 3/19/24 5:52 AM, Philip Müller wrote:
>>>> On 18/03/2024 17:58, Philip Müller wrote:
>>>>> I'm currently developing on the OrangePi Neo-01, which ships with two similar touchpads using the Synaptics driver. On 6.7.10 those two devices get detected normally. On 6.8.1 it seems to error out.
>>>>>
>>>>> I either get none, or at best only one of those two devices.
>>>>>
>>>>> i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
>>>>> i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
>>>>>
>>>>> what would be the best way to debug this?
>>>>>
>>>>
>>>> I found the regression in commit aa69d6974185e9f7a552ba982540a38e34f69690
>>>> HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling
>>>
>>> I just checked that patch and I don't see anyway how that can create
>>> this regression. I assume you did a git bisect ?
>>>
>>> Did you try the last commit in the tree before that commit got added
>>> and verified that that one works where as building a kernel from commit
>>> aa69d6974185e9f itself does not work ?
>>>
>>
>> No I didn't do a git bisect actually. I did it more manually like git bisect might do it. What I did was to compile just that module and load it against the 6.7.10 kernel. a9f68ffe1170ca4bc17ab29067d806a354a026e0 is the last commit you find in 6.7 series. All the other commits are part of the 6.8 series or later. So I looked at the commit titles and picked a9f68ffe1170ca4bc17ab29067d806a354a026e0 which I compiled the "out of tree" module. I unloaded the 6.7.10 module, copied the new compiled one over and did the rmod, modprobe batch script to see how the touchpads react.
>>
>> Then I went to compile and tested af93a167eda90192563bce64c4bb989836afac1f which created the issue with -110 errors. So I went to aa69d6974185e9f7a552ba982540a38e34f69690 which also results in the error. So I went back to 96d3098db835d58649b73a5788898bd7672a319b which still works. Since now 6.9 development started, I may try 00aab7dcb2267f2aef59447602f34501efe1a07f to see if that fixes anything.
>>
>> I can get the touchpads both working in 6.8 code when I do enough tries by a rmod/modprobe loop. Based on the logs you see, sometimes both are up, mostly one or none is up. having only two commits of 6.7 code in the module it works as 6.7 code. Only when "HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling" gets added I see the error and can reproduce it on my device as shown in the log.
>>
>> Before we had
>>
>> hid_err(hid, "reading report descriptor failed\n");
>> kfree(rdesc);
>>
>> followed by the hardcoded return -EIO;
>>
>> Now we have an redirect to the out function but don't do kfree(rdesc) if you hit the error anymore.
>>
>> Also the last return 0; got removed. So maybe what ever error the device might have hit before might be reverted due to return 0 or not freeing rdesc when hitting the error might prevent it to load.
>>
>> Anyhow, that patch is the first patch which changes the function in that series. Sure it might not be able to compile the whole kernel with it. I only tested the module based on the given code in an out of tree module style.
>>
>> So I might test 6.9rc1 on the device and let you know if that kernel has the same issue still.
>>
>>>> When I use the commit before I can rmmod and modprobe in a batch script using a loop without erroring out to -110. Attached the testing script and dmesg log snippets
>>>>
>>>> #!/bin/bash
>>>> for ((n=0;n<5;n++))
>>>> do
>>>> sudo rmmod i2c_hid_acpi
>>>> sleep 1
>>>> sudo modprobe i2c_hid_acpi --force-vermagic
>>>> sleep 2
>>>> done
>>>
>>> Ok, so you did try the commit before and that did work. Are you
>>> sure that aa69d6974185e9f was not actually the last working
>>> commit ?
>>
>> For me 96d3098db835d58649b73a5788898bd7672a319b was the last working code, as it doesn't change functionality.
>>
>>>
>>> AFAICT aa69d6974185e9f makes no functional changes, except for
>>> actually propagating the error from i2c_hid_read_register()
>>> rather then hardcoding -EIO. But that should not matter...
>>
>> See return 0 and kfree(rdesc) which is now missing.
>
> The new code is (on error) "goto out;" and then out: looks like this:
>
> out:
> if (!use_override)
> kfree(rdesc);
>
> return ret;
>
> Since the "goto out;" is an else branch of "if (use_override) { } else {}"
> we know use_override is false here, so !use_override is true and
> the kfree() still happens. Also even if that were to no longer happen that
> would just be a small memleak and would not explain the probe failures
> you are seeing.
>
> As for "return 0" vs "return ret", the code at the end of i2c_hid_parse()
> before commit aa69d6974185e9f looked like this:
>
> if (ret) {
> dbg_hid("parsing report descriptor failed\n");
> return ret;
> }
>
> return 0;
>
> So this would also always return ret because if ret
> is non 0 we always hit if (ret) return ret; and if
> ret is 0 then return 0 and return ret are functionally
> the same.
>
> So since the functionality at the end of the function did
> not change, it still always ends up returning ret, but now
> does it in a less circumspect way.
>
> Which leaves just the change in the:
>
> hid_err(hid, "reading report descriptor failed\n");
>
> code path which used to return -EIO and now does goto out
> which ends up returning ret which is the actual return
> value of i2c_hid_read_register() instead of hardcoding -EIO.
>
> I checked and nothing in the HID core treats -EIO in
> a special way.
>
> So I still do not see how commit aa69d6974185e9f can break
> anything and I really wonder if you did not make a mistake
> during testing.
>
> Can you try building a clean broken kernel (the entire
> kernel) and then in reverse order (of them being committed)
> revert my recent i2c-hid changes 1 by one and after each
> revert check if things start working again ?
>
> And then see which is the first revert after which things
> start working again, that one is the culprit and I expect
> you to find a different commit then aa69d6974185e9f.
>
> Unless I'm missing / overlooking something in commit
> aa69d6974185e9f...
>
> Note I'm going offline for a long weekend and I won't be
> replying to emails until next week Tuesday.
>
> Regards,
>
> Hans
I managed to do a brief test with Kernel 6.9-rc1. There the issue is
still given. So I might add the changes of i2c-hid to the working 6.7.x
kernels and post which commits will break that module.
--
Best, Philip
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-03-29 3:40 ` Philip Müller
@ 2024-04-01 6:20 ` Linux regression tracking (Thorsten Leemhuis)
2024-04-01 6:43 ` Philip Müller
2024-04-02 8:52 ` Hans de Goede
1 sibling, 1 reply; 13+ messages in thread
From: Linux regression tracking (Thorsten Leemhuis) @ 2024-04-01 6:20 UTC (permalink / raw)
To: Philip Müller, Hans de Goede
Cc: Greg Kroah-Hartman, stable, Kenny Levinsen,
Linux kernel regressions list
On 29.03.24 04:40, Philip Müller wrote:
> On 28/03/2024 00:45, Hans de Goede wrote:
>> On 3/27/24 4:47 PM, Philip Müller wrote:
>>> On 27/03/2024 17:31, Hans de Goede wrote:
>>>> On 3/19/24 5:52 AM, Philip Müller wrote:
>>>>> On 18/03/2024 17:58, Philip Müller wrote:
>>>>>> I'm currently developing on the OrangePi Neo-01, which ships with
>>>>>> two similar touchpads using the Synaptics driver. On 6.7.10 those
>>>>>> two devices get detected normally. On 6.8.1 it seems to error out.
>>>>>>
>>>>>> I either get none, or at best only one of those two devices.
>>>>>>
>>>>>> i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
>>>>>> i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
>>>>>>
>>>>>> what would be the best way to debug this?
>>>>>>
>>>>>
>>>>> I found the regression in commit
>>>>> aa69d6974185e9f7a552ba982540a38e34f69690
>>>>> HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling
TWIMC: Kenny Levinsen (now CCed) posted a patch to fix problems
introduced by af93a167eda9:
https://lore.kernel.org/all/20240331182440.14477-1-kl@kl.wtf/
Looks a bit (but I might be wrong there!) like he ran into similar
problems as Philip, but was not aware of this thread.
Ciao, Thorsten
>>>> I just checked that patch and I don't see anyway how that can create
>>>> this regression. I assume you did a git bisect ?
>>>>
>>>> Did you try the last commit in the tree before that commit got added
>>>> and verified that that one works where as building a kernel from commit
>>>> aa69d6974185e9f itself does not work ?
>>>>
>>>
>>> No I didn't do a git bisect actually. I did it more manually like git
>>> bisect might do it. What I did was to compile just that module and
>>> load it against the 6.7.10 kernel.
>>> a9f68ffe1170ca4bc17ab29067d806a354a026e0 is the last commit you find
>>> in 6.7 series. All the other commits are part of the 6.8 series or
>>> later. So I looked at the commit titles and picked
>>> a9f68ffe1170ca4bc17ab29067d806a354a026e0 which I compiled the "out of
>>> tree" module. I unloaded the 6.7.10 module, copied the new compiled
>>> one over and did the rmod, modprobe batch script to see how the
>>> touchpads react.
>>>
>>> Then I went to compile and tested
>>> af93a167eda90192563bce64c4bb989836afac1f which created the issue with
>>> -110 errors. So I went to aa69d6974185e9f7a552ba982540a38e34f69690
>>> which also results in the error. So I went back to
>>> 96d3098db835d58649b73a5788898bd7672a319b which still works. Since now
>>> 6.9 development started, I may try
>>> 00aab7dcb2267f2aef59447602f34501efe1a07f to see if that fixes anything.
>>>
>>> I can get the touchpads both working in 6.8 code when I do enough
>>> tries by a rmod/modprobe loop. Based on the logs you see, sometimes
>>> both are up, mostly one or none is up. having only two commits of 6.7
>>> code in the module it works as 6.7 code. Only when "HID: i2c-hid:
>>> Switch i2c_hid_parse() to goto style error handling" gets added I see
>>> the error and can reproduce it on my device as shown in the log.
>>>
>>> Before we had
>>>
>>> hid_err(hid, "reading report descriptor failed\n");
>>> kfree(rdesc);
>>>
>>> followed by the hardcoded return -EIO;
>>>
>>> Now we have an redirect to the out function but don't do kfree(rdesc)
>>> if you hit the error anymore.
>>>
>>> Also the last return 0; got removed. So maybe what ever error the
>>> device might have hit before might be reverted due to return 0 or not
>>> freeing rdesc when hitting the error might prevent it to load.
>>>
>>> Anyhow, that patch is the first patch which changes the function in
>>> that series. Sure it might not be able to compile the whole kernel
>>> with it. I only tested the module based on the given code in an out
>>> of tree module style.
>>>
>>> So I might test 6.9rc1 on the device and let you know if that kernel
>>> has the same issue still.
>>>
>>>>> When I use the commit before I can rmmod and modprobe in a batch
>>>>> script using a loop without erroring out to -110. Attached the
>>>>> testing script and dmesg log snippets
>>>>>
>>>>> #!/bin/bash
>>>>> for ((n=0;n<5;n++))
>>>>> do
>>>>> sudo rmmod i2c_hid_acpi
>>>>> sleep 1
>>>>> sudo modprobe i2c_hid_acpi --force-vermagic
>>>>> sleep 2
>>>>> done
>>>>
>>>> Ok, so you did try the commit before and that did work. Are you
>>>> sure that aa69d6974185e9f was not actually the last working
>>>> commit ?
>>>
>>> For me 96d3098db835d58649b73a5788898bd7672a319b was the last working
>>> code, as it doesn't change functionality.
>>>
>>>>
>>>> AFAICT aa69d6974185e9f makes no functional changes, except for
>>>> actually propagating the error from i2c_hid_read_register()
>>>> rather then hardcoding -EIO. But that should not matter...
>>>
>>> See return 0 and kfree(rdesc) which is now missing.
>>
>> The new code is (on error) "goto out;" and then out: looks like this:
>>
>> out:
>> if (!use_override)
>> kfree(rdesc);
>>
>> return ret;
>>
>> Since the "goto out;" is an else branch of "if (use_override) { } else
>> {}"
>> we know use_override is false here, so !use_override is true and
>> the kfree() still happens. Also even if that were to no longer happen
>> that
>> would just be a small memleak and would not explain the probe failures
>> you are seeing.
>>
>> As for "return 0" vs "return ret", the code at the end of i2c_hid_parse()
>> before commit aa69d6974185e9f looked like this:
>>
>> if (ret) {
>> dbg_hid("parsing report descriptor failed\n");
>> return ret;
>> }
>>
>> return 0;
>>
>> So this would also always return ret because if ret
>> is non 0 we always hit if (ret) return ret; and if
>> ret is 0 then return 0 and return ret are functionally
>> the same.
>>
>> So since the functionality at the end of the function did
>> not change, it still always ends up returning ret, but now
>> does it in a less circumspect way.
>>
>> Which leaves just the change in the:
>>
>> hid_err(hid, "reading report descriptor failed\n");
>>
>> code path which used to return -EIO and now does goto out
>> which ends up returning ret which is the actual return
>> value of i2c_hid_read_register() instead of hardcoding -EIO.
>>
>> I checked and nothing in the HID core treats -EIO in
>> a special way.
>>
>> So I still do not see how commit aa69d6974185e9f can break
>> anything and I really wonder if you did not make a mistake
>> during testing.
>>
>> Can you try building a clean broken kernel (the entire
>> kernel) and then in reverse order (of them being committed)
>> revert my recent i2c-hid changes 1 by one and after each
>> revert check if things start working again ?
>>
>> And then see which is the first revert after which things
>> start working again, that one is the culprit and I expect
>> you to find a different commit then aa69d6974185e9f.
>>
>> Unless I'm missing / overlooking something in commit
>> aa69d6974185e9f...
>>
>> Note I'm going offline for a long weekend and I won't be
>> replying to emails until next week Tuesday.
>>
>> Regards,
>>
>> Hans
>
> I managed to do a brief test with Kernel 6.9-rc1. There the issue is
> still given. So I might add the changes of i2c-hid to the working 6.7.x
> kernels and post which commits will break that module.
>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-04-01 6:20 ` Linux regression tracking (Thorsten Leemhuis)
@ 2024-04-01 6:43 ` Philip Müller
2024-04-01 10:09 ` Philip Müller
0 siblings, 1 reply; 13+ messages in thread
From: Philip Müller @ 2024-04-01 6:43 UTC (permalink / raw)
To: Linux regressions mailing list, Hans de Goede
Cc: Greg Kroah-Hartman, stable, Kenny Levinsen
On 01/04/2024 13:20, Linux regression tracking (Thorsten Leemhuis) wrote:
> TWIMC: Kenny Levinsen (now CCed) posted a patch to fix problems
> introduced by af93a167eda9:
> https://lore.kernel.org/all/20240331182440.14477-1-kl@kl.wtf/
>
> Looks a bit (but I might be wrong there!) like he ran into similar
> problems as Philip, but was not aware of this thread.
Hi Thorsten,
thx for the pointer. I'm applying it right now and let you know if that
changes the situation on my device. Might be the right direction.
--
Best, Philip
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-04-01 6:43 ` Philip Müller
@ 2024-04-01 10:09 ` Philip Müller
2024-04-01 10:18 ` Linux regression tracking (Thorsten Leemhuis)
0 siblings, 1 reply; 13+ messages in thread
From: Philip Müller @ 2024-04-01 10:09 UTC (permalink / raw)
To: Linux regressions mailing list, Hans de Goede
Cc: Greg Kroah-Hartman, stable, Kenny Levinsen
On 01/04/2024 13:43, Philip Müller wrote:
> On 01/04/2024 13:20, Linux regression tracking (Thorsten Leemhuis) wrote:
>> TWIMC: Kenny Levinsen (now CCed) posted a patch to fix problems
>> introduced by af93a167eda9:
>> https://lore.kernel.org/all/20240331182440.14477-1-kl@kl.wtf/
>>
>> Looks a bit (but I might be wrong there!) like he ran into similar
>> problems as Philip, but was not aware of this thread.
>
> Hi Thorsten,
>
> thx for the pointer. I'm applying it right now and let you know if that
> changes the situation on my device. Might be the right direction.
>
Seems I can confirm that the patch fixes the regression for me. I did
batch test with reloading the module and no -110 errors anymore. We
should add this patch also to 6.8+ kernels and backport if patches from
that series should go to lower LTS kernels.
--
Best, Philip
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-04-01 10:09 ` Philip Müller
@ 2024-04-01 10:18 ` Linux regression tracking (Thorsten Leemhuis)
0 siblings, 0 replies; 13+ messages in thread
From: Linux regression tracking (Thorsten Leemhuis) @ 2024-04-01 10:18 UTC (permalink / raw)
To: Philip Müller, Linux regressions mailing list, Hans de Goede
Cc: Greg Kroah-Hartman, stable, Kenny Levinsen
On 01.04.24 12:09, Philip Müller wrote:
> On 01/04/2024 13:43, Philip Müller wrote:
>> On 01/04/2024 13:20, Linux regression tracking (Thorsten Leemhuis) wrote:
>>> TWIMC: Kenny Levinsen (now CCed) posted a patch to fix problems
>>> introduced by af93a167eda9:
>>> https://lore.kernel.org/all/20240331182440.14477-1-kl@kl.wtf/
>>>
>>> Looks a bit (but I might be wrong there!) like he ran into similar
>>> problems as Philip, but was not aware of this thread.
>>
>> thx for the pointer. I'm applying it right now and let you know if
>> that changes the situation on my device. Might be the right direction.
>
> Seems I can confirm that the patch fixes the regression for me.
Thx for testing!
> I did
> batch test with reloading the module and no -110 errors anymore. We
> should add this patch also to 6.8+ kernels and backport if patches from
> that series should go to lower LTS kernels.
Well, ideally Kenny would add a stable tag to ensure backporting to
affected series, but that's up to Kenny.
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
If I did something stupid, please tell me, as explained on that page.
#regzbot fix: HID: i2c-hid: Revert to await reset ACK before reading
report descriptor
#regzbot monitor:
https://lore.kernel.org/all/20240331182440.14477-1-kl@kl.wtf/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
2024-03-29 3:40 ` Philip Müller
2024-04-01 6:20 ` Linux regression tracking (Thorsten Leemhuis)
@ 2024-04-02 8:52 ` Hans de Goede
2024-04-02 9:20 ` Philip Müller
1 sibling, 1 reply; 13+ messages in thread
From: Hans de Goede @ 2024-04-02 8:52 UTC (permalink / raw)
To: Philip Müller; +Cc: Greg Kroah-Hartman, stable
Hi Philiph,
Someone else has hit the same problem and has correctly pinpointed
it to another commit (in the same series) and submitted a fix
upstream:
https://lore.kernel.org/linux-input/20240331182440.14477-1-kl@kl.wtf/T/#u
I'll be reviewing this patch shortly.
Regards,
Hans
On 3/29/24 4:40 AM, Philip Müller wrote:
> On 28/03/2024 00:45, Hans de Goede wrote:
>> Hi Philip,
>>
>> On 3/27/24 4:47 PM, Philip Müller wrote:
>>> On 27/03/2024 17:31, Hans de Goede wrote:
>>>> Hi Philip,
>>>>
>>>> On 3/19/24 5:52 AM, Philip Müller wrote:
>>>>> On 18/03/2024 17:58, Philip Müller wrote:
>>>>>> I'm currently developing on the OrangePi Neo-01, which ships with two similar touchpads using the Synaptics driver. On 6.7.10 those two devices get detected normally. On 6.8.1 it seems to error out.
>>>>>>
>>>>>> I either get none, or at best only one of those two devices.
>>>>>>
>>>>>> i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110
>>>>>> i2c_hid_acpi: probe of i2c-XXX0002:00 failed with error -110
>>>>>>
>>>>>> what would be the best way to debug this?
>>>>>>
>>>>>
>>>>> I found the regression in commit aa69d6974185e9f7a552ba982540a38e34f69690
>>>>> HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling
>>>>
>>>> I just checked that patch and I don't see anyway how that can create
>>>> this regression. I assume you did a git bisect ?
>>>>
>>>> Did you try the last commit in the tree before that commit got added
>>>> and verified that that one works where as building a kernel from commit
>>>> aa69d6974185e9f itself does not work ?
>>>>
>>>
>>> No I didn't do a git bisect actually. I did it more manually like git bisect might do it. What I did was to compile just that module and load it against the 6.7.10 kernel. a9f68ffe1170ca4bc17ab29067d806a354a026e0 is the last commit you find in 6.7 series. All the other commits are part of the 6.8 series or later. So I looked at the commit titles and picked a9f68ffe1170ca4bc17ab29067d806a354a026e0 which I compiled the "out of tree" module. I unloaded the 6.7.10 module, copied the new compiled one over and did the rmod, modprobe batch script to see how the touchpads react.
>>>
>>> Then I went to compile and tested af93a167eda90192563bce64c4bb989836afac1f which created the issue with -110 errors. So I went to aa69d6974185e9f7a552ba982540a38e34f69690 which also results in the error. So I went back to 96d3098db835d58649b73a5788898bd7672a319b which still works. Since now 6.9 development started, I may try 00aab7dcb2267f2aef59447602f34501efe1a07f to see if that fixes anything.
>>>
>>> I can get the touchpads both working in 6.8 code when I do enough tries by a rmod/modprobe loop. Based on the logs you see, sometimes both are up, mostly one or none is up. having only two commits of 6.7 code in the module it works as 6.7 code. Only when "HID: i2c-hid: Switch i2c_hid_parse() to goto style error handling" gets added I see the error and can reproduce it on my device as shown in the log.
>>>
>>> Before we had
>>>
>>> hid_err(hid, "reading report descriptor failed\n");
>>> kfree(rdesc);
>>>
>>> followed by the hardcoded return -EIO;
>>>
>>> Now we have an redirect to the out function but don't do kfree(rdesc) if you hit the error anymore.
>>>
>>> Also the last return 0; got removed. So maybe what ever error the device might have hit before might be reverted due to return 0 or not freeing rdesc when hitting the error might prevent it to load.
>>>
>>> Anyhow, that patch is the first patch which changes the function in that series. Sure it might not be able to compile the whole kernel with it. I only tested the module based on the given code in an out of tree module style.
>>>
>>> So I might test 6.9rc1 on the device and let you know if that kernel has the same issue still.
>>>
>>>>> When I use the commit before I can rmmod and modprobe in a batch script using a loop without erroring out to -110. Attached the testing script and dmesg log snippets
>>>>>
>>>>> #!/bin/bash
>>>>> for ((n=0;n<5;n++))
>>>>> do
>>>>> sudo rmmod i2c_hid_acpi
>>>>> sleep 1
>>>>> sudo modprobe i2c_hid_acpi --force-vermagic
>>>>> sleep 2
>>>>> done
>>>>
>>>> Ok, so you did try the commit before and that did work. Are you
>>>> sure that aa69d6974185e9f was not actually the last working
>>>> commit ?
>>>
>>> For me 96d3098db835d58649b73a5788898bd7672a319b was the last working code, as it doesn't change functionality.
>>>
>>>>
>>>> AFAICT aa69d6974185e9f makes no functional changes, except for
>>>> actually propagating the error from i2c_hid_read_register()
>>>> rather then hardcoding -EIO. But that should not matter...
>>>
>>> See return 0 and kfree(rdesc) which is now missing.
>>
>> The new code is (on error) "goto out;" and then out: looks like this:
>>
>> out:
>> if (!use_override)
>> kfree(rdesc);
>>
>> return ret;
>>
>> Since the "goto out;" is an else branch of "if (use_override) { } else {}"
>> we know use_override is false here, so !use_override is true and
>> the kfree() still happens. Also even if that were to no longer happen that
>> would just be a small memleak and would not explain the probe failures
>> you are seeing.
>>
>> As for "return 0" vs "return ret", the code at the end of i2c_hid_parse()
>> before commit aa69d6974185e9f looked like this:
>>
>> if (ret) {
>> dbg_hid("parsing report descriptor failed\n");
>> return ret;
>> }
>>
>> return 0;
>>
>> So this would also always return ret because if ret
>> is non 0 we always hit if (ret) return ret; and if
>> ret is 0 then return 0 and return ret are functionally
>> the same.
>>
>> So since the functionality at the end of the function did
>> not change, it still always ends up returning ret, but now
>> does it in a less circumspect way.
>>
>> Which leaves just the change in the:
>>
>> hid_err(hid, "reading report descriptor failed\n");
>>
>> code path which used to return -EIO and now does goto out
>> which ends up returning ret which is the actual return
>> value of i2c_hid_read_register() instead of hardcoding -EIO.
>>
>> I checked and nothing in the HID core treats -EIO in
>> a special way.
>>
>> So I still do not see how commit aa69d6974185e9f can break
>> anything and I really wonder if you did not make a mistake
>> during testing.
>>
>> Can you try building a clean broken kernel (the entire
>> kernel) and then in reverse order (of them being committed)
>> revert my recent i2c-hid changes 1 by one and after each
>> revert check if things start working again ?
>>
>> And then see which is the first revert after which things
>> start working again, that one is the culprit and I expect
>> you to find a different commit then aa69d6974185e9f.
>>
>> Unless I'm missing / overlooking something in commit
>> aa69d6974185e9f...
>>
>> Note I'm going offline for a long weekend and I won't be
>> replying to emails until next week Tuesday.
>>
>> Regards,
>>
>> Hans
>
> I managed to do a brief test with Kernel 6.9-rc1. There the issue is still given. So I might add the changes of i2c-hid to the working 6.7.x kernels and post which commits will break that module.
>
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2024-04-02 9:21 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-18 10:58 [Regression] 6.8 - i2c_hid_acpi: probe of i2c-XXX0001:00 failed with error -110 Philip Müller
2024-03-19 4:52 ` Philip Müller
2024-03-22 11:01 ` Linux regression tracking (Thorsten Leemhuis)
2024-03-27 10:31 ` Hans de Goede
2024-03-27 15:47 ` Philip Müller
2024-03-27 17:45 ` Hans de Goede
2024-03-29 3:40 ` Philip Müller
2024-04-01 6:20 ` Linux regression tracking (Thorsten Leemhuis)
2024-04-01 6:43 ` Philip Müller
2024-04-01 10:09 ` Philip Müller
2024-04-01 10:18 ` Linux regression tracking (Thorsten Leemhuis)
2024-04-02 8:52 ` Hans de Goede
2024-04-02 9:20 ` Philip Müller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.