* Re: Adding selftest testdata dynamically into live tree @ 2014-09-22 18:05 Janusz Użycki [not found] ` <542064F1.4000601-9tnw74Q4ehaHKKo6LODCOg@public.gmane.org> 0 siblings, 1 reply; 7+ messages in thread From: Janusz Użycki @ 2014-09-22 18:05 UTC (permalink / raw) To: Gaurav Minocha, Grant Likely; +Cc: devicetree-u79uwXL29TY76Z2rM5mHXA Hi. On 3.17.0-rc6-next-20140922+ with CONFIG_OF_SELFTEST enabled zImage is recreated every time I call "make" despite I've not done any change in source files and zImage was the same. This is caused by the rm line: CALL scripts/checksyscalls.sh CHK include/generated/compile.h DTC drivers/of/testcase-data/testcases.dtb DTB drivers/of/testcase-data/testcases.dtb.S AS drivers/of/testcase-data/testcases.dtb.o LD drivers/of/of_selftest.o LD drivers/of/built-in.o rm drivers/of/testcase-data/testcases.dtb.S drivers/of/testcase-data/testcases.dtb LD drivers/built-in.o LINK vmlinux LD vmlinux.o best regards Janusz -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <542064F1.4000601-9tnw74Q4ehaHKKo6LODCOg@public.gmane.org>]
* Re: Adding selftest testdata dynamically into live tree [not found] ` <542064F1.4000601-9tnw74Q4ehaHKKo6LODCOg@public.gmane.org> @ 2014-09-24 18:03 ` Gaurav Minocha [not found] ` <CA+rpMbKkS1D=QYSMftgZyTMbHS9+O=YjR+OL_RvzjJPjo2Ox6w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2014-09-26 12:09 ` Grant Likely 1 sibling, 1 reply; 7+ messages in thread From: Gaurav Minocha @ 2014-09-24 18:03 UTC (permalink / raw) To: Janusz Użycki; +Cc: Grant Likely, devicetree-u79uwXL29TY76Z2rM5mHXA On Mon, Sep 22, 2014 at 11:05 AM, Janusz Użycki <j.uzycki@elproma.com.pl> wrote: > Hi. > > On 3.17.0-rc6-next-20140922+ with CONFIG_OF_SELFTEST enabled > zImage is recreated every time I call "make" despite I've not done > any change in source files and zImage was the same. > This is caused by the rm line: I believe the make rule compiles test data without checking whether the test data dts files have been changed or not. I am not sure how to fix it. So, either direct me or feel free to pick it. Thanks! > CALL scripts/checksyscalls.sh > CHK include/generated/compile.h > DTC drivers/of/testcase-data/testcases.dtb > DTB drivers/of/testcase-data/testcases.dtb.S > AS drivers/of/testcase-data/testcases.dtb.o > LD drivers/of/of_selftest.o > LD drivers/of/built-in.o > rm drivers/of/testcase-data/testcases.dtb.S > drivers/of/testcase-data/testcases.dtb > LD drivers/built-in.o > LINK vmlinux > LD vmlinux.o > > best regards > Janusz > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <CA+rpMbKkS1D=QYSMftgZyTMbHS9+O=YjR+OL_RvzjJPjo2Ox6w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: Adding selftest testdata dynamically into live tree [not found] ` <CA+rpMbKkS1D=QYSMftgZyTMbHS9+O=YjR+OL_RvzjJPjo2Ox6w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2014-09-24 18:05 ` Janusz Użycki 0 siblings, 0 replies; 7+ messages in thread From: Janusz Użycki @ 2014-09-24 18:05 UTC (permalink / raw) To: Gaurav Minocha; +Cc: Grant Likely, devicetree-u79uwXL29TY76Z2rM5mHXA W dniu 2014-09-24 20:03, Gaurav Minocha pisze: > On Mon, Sep 22, 2014 at 11:05 AM, Janusz Użycki <j.uzycki@elproma.com.pl> wrote: >> Hi. >> >> On 3.17.0-rc6-next-20140922+ with CONFIG_OF_SELFTEST enabled >> zImage is recreated every time I call "make" despite I've not done >> any change in source files and zImage was the same. >> This is caused by the rm line: > I believe the make rule compiles test data without checking > whether the test data dts files have been changed or not. > > I am not sure how to fix it. So, either direct me or feel free to > pick it. Thanks! I just disabled CONFIG_OF_SELFTEST now and it works for me. best regards Janusz > >> CALL scripts/checksyscalls.sh >> CHK include/generated/compile.h >> DTC drivers/of/testcase-data/testcases.dtb >> DTB drivers/of/testcase-data/testcases.dtb.S >> AS drivers/of/testcase-data/testcases.dtb.o >> LD drivers/of/of_selftest.o >> LD drivers/of/built-in.o >> rm drivers/of/testcase-data/testcases.dtb.S >> drivers/of/testcase-data/testcases.dtb >> LD drivers/built-in.o >> LINK vmlinux >> LD vmlinux.o >> >> best regards >> Janusz >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Adding selftest testdata dynamically into live tree [not found] ` <542064F1.4000601-9tnw74Q4ehaHKKo6LODCOg@public.gmane.org> 2014-09-24 18:03 ` Gaurav Minocha @ 2014-09-26 12:09 ` Grant Likely [not found] ` <20140926120917.B60B4C40FEB-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org> 1 sibling, 1 reply; 7+ messages in thread From: Grant Likely @ 2014-09-26 12:09 UTC (permalink / raw) To: Janusz Użycki, Gaurav Minocha; +Cc: devicetree-u79uwXL29TY76Z2rM5mHXA On Mon, 22 Sep 2014 20:05:37 +0200, Janusz Użycki <j.uzycki@elproma.com.pl> wrote: > Hi. > > On 3.17.0-rc6-next-20140922+ with CONFIG_OF_SELFTEST enabled > zImage is recreated every time I call "make" despite I've not done > any change in source files and zImage was the same. > This is caused by the rm line: > CALL scripts/checksyscalls.sh > CHK include/generated/compile.h > DTC drivers/of/testcase-data/testcases.dtb > DTB drivers/of/testcase-data/testcases.dtb.S > AS drivers/of/testcase-data/testcases.dtb.o > LD drivers/of/of_selftest.o > LD drivers/of/built-in.o > rm drivers/of/testcase-data/testcases.dtb.S > drivers/of/testcase-data/testcases.dtb > LD drivers/built-in.o > LINK vmlinux > LD vmlinux.o Try this change: diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 260bf8acfce9..4555e2e1b4ed 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -269,7 +269,7 @@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) -$(obj)/%.dtb: $(src)/%.dts FORCE +$(obj)/%.dtb: $(src)/%.dts $(call if_changed_dep,dtc) dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 7+ messages in thread
[parent not found: <20140926120917.B60B4C40FEB-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>]
* Re: Adding selftest testdata dynamically into live tree [not found] ` <20140926120917.B60B4C40FEB-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org> @ 2014-09-26 13:36 ` Janusz Użycki 2014-09-26 15:07 ` Grant Likely 0 siblings, 1 reply; 7+ messages in thread From: Janusz Użycki @ 2014-09-26 13:36 UTC (permalink / raw) To: Grant Likely, Gaurav Minocha; +Cc: devicetree-u79uwXL29TY76Z2rM5mHXA The patch didn't help. Exactly the same. best regards Janusz W dniu 2014-09-26 14:09, Grant Likely pisze: > On Mon, 22 Sep 2014 20:05:37 +0200, Janusz Użycki <j.uzycki@elproma.com.pl> wrote: >> Hi. >> >> On 3.17.0-rc6-next-20140922+ with CONFIG_OF_SELFTEST enabled >> zImage is recreated every time I call "make" despite I've not done >> any change in source files and zImage was the same. >> This is caused by the rm line: >> CALL scripts/checksyscalls.sh >> CHK include/generated/compile.h >> DTC drivers/of/testcase-data/testcases.dtb >> DTB drivers/of/testcase-data/testcases.dtb.S >> AS drivers/of/testcase-data/testcases.dtb.o >> LD drivers/of/of_selftest.o >> LD drivers/of/built-in.o >> rm drivers/of/testcase-data/testcases.dtb.S >> drivers/of/testcase-data/testcases.dtb >> LD drivers/built-in.o >> LINK vmlinux >> LD vmlinux.o > Try this change: > > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib > index 260bf8acfce9..4555e2e1b4ed 100644 > --- a/scripts/Makefile.lib > +++ b/scripts/Makefile.lib > @@ -269,7 +269,7 @@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ > -d $(depfile).dtc.tmp $(dtc-tmp) ; \ > cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) > > -$(obj)/%.dtb: $(src)/%.dts FORCE > +$(obj)/%.dtb: $(src)/%.dts > $(call if_changed_dep,dtc) > > dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Adding selftest testdata dynamically into live tree 2014-09-26 13:36 ` Janusz Użycki @ 2014-09-26 15:07 ` Grant Likely 0 siblings, 0 replies; 7+ messages in thread From: Grant Likely @ 2014-09-26 15:07 UTC (permalink / raw) To: Janusz Użycki; +Cc: Gaurav Minocha, devicetree, linux-kbuild, Michal Marek On Fri, Sep 26, 2014 at 2:36 PM, Janusz Użycki <j.uzycki@elproma.com.pl> wrote: > The patch didn't help. Exactly the same. Odd it worked here. It's moot anyway though because it breaks checking dependencies on .dts files. I need someone stronger on kbuild-foo to figure this out out. I've cc'd Michal and the kbuild mailing list. Hopefully someone there can help figure this out. g. > > best regards > Janusz > > W dniu 2014-09-26 14:09, Grant Likely pisze: > >> On Mon, 22 Sep 2014 20:05:37 +0200, Janusz Użycki >> <j.uzycki@elproma.com.pl> wrote: >>> >>> Hi. >>> >>> On 3.17.0-rc6-next-20140922+ with CONFIG_OF_SELFTEST enabled >>> zImage is recreated every time I call "make" despite I've not done >>> any change in source files and zImage was the same. >>> This is caused by the rm line: >>> CALL scripts/checksyscalls.sh >>> CHK include/generated/compile.h >>> DTC drivers/of/testcase-data/testcases.dtb >>> DTB drivers/of/testcase-data/testcases.dtb.S >>> AS drivers/of/testcase-data/testcases.dtb.o >>> LD drivers/of/of_selftest.o >>> LD drivers/of/built-in.o >>> rm drivers/of/testcase-data/testcases.dtb.S >>> drivers/of/testcase-data/testcases.dtb >>> LD drivers/built-in.o >>> LINK vmlinux >>> LD vmlinux.o >> >> Try this change: >> >> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib >> index 260bf8acfce9..4555e2e1b4ed 100644 >> --- a/scripts/Makefile.lib >> +++ b/scripts/Makefile.lib >> @@ -269,7 +269,7 @@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x >> assembler-with-cpp -o $(dtc-tmp) $< ; \ >> -d $(depfile).dtc.tmp $(dtc-tmp) ; \ >> cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) >> -$(obj)/%.dtb: $(src)/%.dts FORCE >> +$(obj)/%.dtb: $(src)/%.dts >> $(call if_changed_dep,dtc) >> dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) >> > -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Adding selftest testdata dynamically into live tree @ 2014-09-26 15:07 ` Grant Likely 0 siblings, 0 replies; 7+ messages in thread From: Grant Likely @ 2014-09-26 15:07 UTC (permalink / raw) To: Janusz Użycki; +Cc: Gaurav Minocha, devicetree, linux-kbuild, Michal Marek On Fri, Sep 26, 2014 at 2:36 PM, Janusz Użycki <j.uzycki@elproma.com.pl> wrote: > The patch didn't help. Exactly the same. Odd it worked here. It's moot anyway though because it breaks checking dependencies on .dts files. I need someone stronger on kbuild-foo to figure this out out. I've cc'd Michal and the kbuild mailing list. Hopefully someone there can help figure this out. g. > > best regards > Janusz > > W dniu 2014-09-26 14:09, Grant Likely pisze: > >> On Mon, 22 Sep 2014 20:05:37 +0200, Janusz Użycki >> <j.uzycki@elproma.com.pl> wrote: >>> >>> Hi. >>> >>> On 3.17.0-rc6-next-20140922+ with CONFIG_OF_SELFTEST enabled >>> zImage is recreated every time I call "make" despite I've not done >>> any change in source files and zImage was the same. >>> This is caused by the rm line: >>> CALL scripts/checksyscalls.sh >>> CHK include/generated/compile.h >>> DTC drivers/of/testcase-data/testcases.dtb >>> DTB drivers/of/testcase-data/testcases.dtb.S >>> AS drivers/of/testcase-data/testcases.dtb.o >>> LD drivers/of/of_selftest.o >>> LD drivers/of/built-in.o >>> rm drivers/of/testcase-data/testcases.dtb.S >>> drivers/of/testcase-data/testcases.dtb >>> LD drivers/built-in.o >>> LINK vmlinux >>> LD vmlinux.o >> >> Try this change: >> >> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib >> index 260bf8acfce9..4555e2e1b4ed 100644 >> --- a/scripts/Makefile.lib >> +++ b/scripts/Makefile.lib >> @@ -269,7 +269,7 @@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x >> assembler-with-cpp -o $(dtc-tmp) $< ; \ >> -d $(depfile).dtc.tmp $(dtc-tmp) ; \ >> cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) >> -$(obj)/%.dtb: $(src)/%.dts FORCE >> +$(obj)/%.dtb: $(src)/%.dts >> $(call if_changed_dep,dtc) >> dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) >> > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-09-26 15:07 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-09-22 18:05 Adding selftest testdata dynamically into live tree Janusz Użycki [not found] ` <542064F1.4000601-9tnw74Q4ehaHKKo6LODCOg@public.gmane.org> 2014-09-24 18:03 ` Gaurav Minocha [not found] ` <CA+rpMbKkS1D=QYSMftgZyTMbHS9+O=YjR+OL_RvzjJPjo2Ox6w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2014-09-24 18:05 ` Janusz Użycki 2014-09-26 12:09 ` Grant Likely [not found] ` <20140926120917.B60B4C40FEB-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org> 2014-09-26 13:36 ` Janusz Użycki 2014-09-26 15:07 ` Grant Likely 2014-09-26 15:07 ` Grant Likely
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.