[Cocci] coccinelle-1.0.0-rc18

[Cocci] coccinelle-1.0.0-rc18

[Jamal Khashan]

Hello,

I am having difficulties enabling python scripting with coccinelle-1.0.0-rc18 as follows

running source package configure

# ./configure --enable-release --with-python=/usr/bin/python
.
.

configure: skipped the selection of a global pycaml module because --enable-python is given explicitly but --enable-pycaml is not.
checking for /usr/bin/python... /usr/bin/python
checking python version... 2.6 found
configure: python major version: 2
configure: looking for the corresponding python library
checking for PYTHON... no
configure: error: the python scripts feature is enabled but the pkg-config python library is not found
.
.
# dpkg -l |grep pkg-config
ii  pkg-config                                        0.22-1build2                                    manage compile and link flags for libraries
#<mailto:root@swsrvapps-01:~/conf/coccinelle-1.0.0-rc18/setup#>

# which spatch
/usr/local/bin/spatch
# spatch --version
spatch version 1.0.0-rc17 without Python support and with PCRE support
#


Thanks and best regards,

Jamal Khashan
Dialog Semiconductors IT Helpdesk
Direct Dial: +49 (0)7021 805 555
Jamal.Khashan at diasemi.com<mailto:Jamal.Khashan@diasemi.com> |  www.diasemi.com<http://www.diasemi.com/>
Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany



________________________________

Dialog Semiconductor GmbH
Neue Str. 95
D-73230 Kirchheim
Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
Chairman of the Supervisory Board: Gregorio Reyes
Commercial register: Amtsgericht Stuttgart: HRB 231181
UST-ID-Nr. DE 811121668

Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.

Please consider the environment before printing this e-mail


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://systeme.lip6.fr/pipermail/cocci/attachments/20130823/2f0be3f4/attachment.html>

[Cocci] coccinelle-1.0.0-rc18

[Julia Lawall]

> I am having difficulties enabling python scripting with
> coccinelle-1.0.0-rc18 as follows

What OS/distribution are you using?  Perhaps the problem could be that you 
have python 2.6?  I have 2.7.

Maybe you should try something like

pkg-config --exists --print-errors python-2.6

julia

[Cocci] coccinelle-1.0.0-rc18

[Jamal Khashan]

Hi Julia,

Thanks for feedback, sorry for the late reply, I was on Vacation for a week, but here's the output requested

# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 10.04.4 LTS
Release:        10.04
Codename:       lucid
#


# pkg-config --exists --print-errors python-2.6
Package python-2.6 was not found in the pkg-config search path.
Perhaps you should add the directory containing `python-2.6.pc'
to the PKG_CONFIG_PATH environment variable
No package 'python-2.6' found
#

Thanks and best regards,

Jamal Khashan
Dialog Semiconductors IT Helpdesk
Direct Dial: +49 (0)7021 805 555
Jamal.Khashan at diasemi.com |  www.diasemi.com
Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany


-----Original Message-----
From: Julia Lawall [mailto:julia.lawall at lip6.fr]
Sent: Saturday, August 24, 2013 8:12 AM
To: Jamal Khashan
Cc: 'cocci at systeme.lip6.fr'
Subject: Re: [Cocci] coccinelle-1.0.0-rc18

> I am having difficulties enabling python scripting with
> coccinelle-1.0.0-rc18 as follows

What OS/distribution are you using?  Perhaps the problem could be that you have python 2.6?  I have 2.7.

Maybe you should try something like

pkg-config --exists --print-errors python-2.6

julia
________________________________

Dialog Semiconductor GmbH
Neue Str. 95
D-73230 Kirchheim
Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
Chairman of the Supervisory Board: Gregorio Reyes
Commercial register: Amtsgericht Stuttgart: HRB 231181
UST-ID-Nr. DE 811121668

Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.

Please consider the environment before printing this e-mail

[Cocci] coccinelle-1.0.0-rc18

[Julia Lawall]

On Mon, 2 Sep 2013, Jamal Khashan wrote:

> Hi Julia,
>
> Thanks for feedback, sorry for the late reply, I was on Vacation for a week, but here's the output requested
>
> # lsb_release -a
> No LSB modules are available.
> Distributor ID: Ubuntu
> Description:    Ubuntu 10.04.4 LTS
> Release:        10.04
> Codename:       lucid
> #

I think this version is a bit old?  Do you have the possibility to
upgrade.  On the other hand, it is the same version that I have at home,
so I can try to reproduce the problem.

> # pkg-config --exists --print-errors python-2.6
> Package python-2.6 was not found in the pkg-config search path.
> Perhaps you should add the directory containing `python-2.6.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'python-2.6' found
> #

Do you just need to install python 2.6?  Did you install it separately
from ubuntu?

I don't know much about pkg-config.  Maybe someone else knows why you
might have some software installed but pkg-config can't find it.

julia

> Thanks and best regards,
>
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com |  www.diasemi.com
> Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>
>
> -----Original Message-----
> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
> Sent: Saturday, August 24, 2013 8:12 AM
> To: Jamal Khashan
> Cc: 'cocci at systeme.lip6.fr'
> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>
> > I am having difficulties enabling python scripting with
> > coccinelle-1.0.0-rc18 as follows
>
> What OS/distribution are you using?  Perhaps the problem could be that you have python 2.6?  I have 2.7.
>
> Maybe you should try something like
>
> pkg-config --exists --print-errors python-2.6
>
> julia
> ________________________________
>
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
> Chairman of the Supervisory Board: Gregorio Reyes
> Commercial register: Amtsgericht Stuttgart: HRB 231181
> UST-ID-Nr. DE 811121668
>
> Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>
> Please consider the environment before printing this e-mail
>
>
>

[Cocci] coccinelle-1.0.0-rc18

[Jamal Khashan]

Hi Julia,

Thanks for your feedback.

I think this version is a bit old?  Do you have the possibility to upgrade?
Unfortunately I neither can upgrade Ubuntu nor python per feedback from my clients as follows
"
Hi Jamal,
I've spoken with several other engineers and it would be a big risk to update python. We are using Gitorious (python) which manages all our software version control, also other people in different teams use python for their development and I do not know how this would affect those people. I think that his update would be too risky for us at the moment.
Regards,
Stephen
"

Can I supply any info, logs, configuration files etc that might assist in resolving this issue without OS or application upgrade?


Thanks and best regards,

Jamal Khashan
Dialog Semiconductors IT Helpdesk
Direct Dial: +49 (0)7021 805 555
Jamal.Khashan at diasemi.com |  www.diasemi.com
Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany


-----Original Message-----
From: Julia Lawall [mailto:julia.lawall at lip6.fr]
Sent: Monday, September 02, 2013 3:22 PM
To: Jamal Khashan
Cc: 'cocci at systeme.lip6.fr'
Subject: RE: [Cocci] coccinelle-1.0.0-rc18

On Mon, 2 Sep 2013, Jamal Khashan wrote:

> Hi Julia,
>
> Thanks for feedback, sorry for the late reply, I was on Vacation for a
> week, but here's the output requested
>
> # lsb_release -a
> No LSB modules are available.
> Distributor ID: Ubuntu
> Description:    Ubuntu 10.04.4 LTS
> Release:        10.04
> Codename:       lucid
> #

I think this version is a bit old?  Do you have the possibility to upgrade.  On the other hand, it is the same version that I have at home, so I can try to reproduce the problem.

> # pkg-config --exists --print-errors python-2.6 Package python-2.6 was
> not found in the pkg-config search path.
> Perhaps you should add the directory containing `python-2.6.pc'
> to the PKG_CONFIG_PATH environment variable No package 'python-2.6'
> found #

Do you just need to install python 2.6?  Did you install it separately from ubuntu?

I don't know much about pkg-config.  Maybe someone else knows why you might have some software installed but pkg-config can't find it.

julia

> Thanks and best regards,
>
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com<mailto:Jamal.Khashan@diasemi.com> |  www.diasemi.com<http://www.diasemi.com> Dialog Semiconductor
> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>
>
> -----Original Message-----
> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
> Sent: Saturday, August 24, 2013 8:12 AM
> To: Jamal Khashan
> Cc: 'cocci at systeme.lip6.fr'
> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>
> > I am having difficulties enabling python scripting with
> > coccinelle-1.0.0-rc18 as follows
>
> What OS/distribution are you using?  Perhaps the problem could be that you have python 2.6?  I have 2.7.
>
> Maybe you should try something like
>
> pkg-config --exists --print-errors python-2.6
>
> julia
> ________________________________
>
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
> of the Supervisory Board: Gregorio Reyes Commercial register:
> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668
>
> Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>
> Please consider the environment before printing this e-mail
>
>
>



  ________________________________

Dialog Semiconductor GmbH
Neue Str. 95
D-73230 Kirchheim
Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
Chairman of the Supervisory Board: Gregorio Reyes
Commercial register: Amtsgericht Stuttgart: HRB 231181
UST-ID-Nr. DE 811121668

Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.

Please consider the environment before printing this e-mail
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://systeme.lip6.fr/pipermail/cocci/attachments/20130903/c315db79/attachment-0001.html>

[Cocci] coccinelle-1.0.0-rc18

[Peter Senna Tschudin]

Hi Jamal,

Can you try to configure with:

$ ./configure --enable-release --without-pkg-config

Thanks,

Peter
...

On Tue, Sep 3, 2013 at 8:24 AM, Jamal Khashan <Jamal.Khashan@diasemi.com> wrote:
> Hi Julia,
>
> Thanks for your feedback.
>
> I think this version is a bit old?  Do you have the possibility to upgrade?
> Unfortunately I neither can upgrade Ubuntu nor python per feedback from my
> clients as follows
> ?
> Hi Jamal,
> I've spoken with several other engineers and it would be a big risk to
> update python. We are using Gitorious (python) which manages all our
> software version control, also other people in different teams use python
> for their development and I do not know how this would affect those people.
> I think that his update would be too risky for us at the moment.
> Regards,
> Stephen
> ?
>
> Can I supply any info, logs, configuration files etc that might assist in
> resolving this issue without OS or application upgrade?
>
>
> Thanks and best regards,
>
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com |  www.diasemi.com
> Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>
>
> -----Original Message-----
> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
> Sent: Monday, September 02, 2013 3:22 PM
> To: Jamal Khashan
> Cc: 'cocci at systeme.lip6.fr'
> Subject: RE: [Cocci] coccinelle-1.0.0-rc18
>
> On Mon, 2 Sep 2013, Jamal Khashan wrote:
>
>> Hi Julia,
>>
>> Thanks for feedback, sorry for the late reply, I was on Vacation for a
>> week, but here's the output requested
>>
>> # lsb_release -a
>> No LSB modules are available.
>> Distributor ID: Ubuntu
>> Description:    Ubuntu 10.04.4 LTS
>> Release:        10.04
>> Codename:       lucid
>> #
>
> I think this version is a bit old?  Do you have the possibility to upgrade.
> On the other hand, it is the same version that I have at home, so I can try
> to reproduce the problem.
>
>> # pkg-config --exists --print-errors python-2.6 Package python-2.6 was
>> not found in the pkg-config search path.
>> Perhaps you should add the directory containing `python-2.6.pc'
>> to the PKG_CONFIG_PATH environment variable No package 'python-2.6'
>> found #
>
> Do you just need to install python 2.6?  Did you install it separately from
> ubuntu?
>
> I don't know much about pkg-config.  Maybe someone else knows why you might
> have some software installed but pkg-config can't find it.
>
> julia
>
>> Thanks and best regards,
>>
>> Jamal Khashan
>> Dialog Semiconductors IT Helpdesk
>> Direct Dial: +49 (0)7021 805 555
>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>
>>
>> -----Original Message-----
>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>> Sent: Saturday, August 24, 2013 8:12 AM
>> To: Jamal Khashan
>> Cc: 'cocci at systeme.lip6.fr'
>> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>>
>> > I am having difficulties enabling python scripting with
>> > coccinelle-1.0.0-rc18 as follows
>>
>> What OS/distribution are you using?  Perhaps the problem could be that you
>> have python 2.6?  I have 2.7.
>>
>> Maybe you should try something like
>>
>> pkg-config --exists --print-errors python-2.6
>>
>> julia
>> ________________________________
>>
>> Dialog Semiconductor GmbH
>> Neue Str. 95
>> D-73230 Kirchheim
>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>> of the Supervisory Board: Gregorio Reyes Commercial register:
>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668
>>
>> Legal Disclaimer: This e-mail communication (and any attachment/s) is
>> confidential and contains proprietary information, some or all of which may
>> be legally privileged. It is intended solely for the use of the individual
>> or entity to which it is addressed. Access to this email by anyone else is
>> unauthorized. If you are not the intended recipient, any disclosure,
>> copying, distribution or any action taken or omitted to be taken in reliance
>> on it, is prohibited and may be unlawful.
>>
>> Please consider the environment before printing this e-mail
>>
>>
>>
>
>
>
>   ________________________________
>
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
> Chairman of the Supervisory Board: Gregorio Reyes
> Commercial register: Amtsgericht Stuttgart: HRB 231181
> UST-ID-Nr. DE 811121668
> Legal Disclaimer: This e-mail communication (and any attachment/s) is
> confidential and contains proprietary information, some or all of which may
> be legally privileged. It is intended solely for the use of the individual
> or entity to which it is addressed. Access to this email by anyone else is
> unauthorized. If you are not the intended recipient, any disclosure,
> copying, distribution or any action taken or omitted to be taken in reliance
> on it, is prohibited and may be unlawful.
>
> Please consider the environment before printing this e-mail
>
>
> _______________________________________________
> Cocci mailing list
> Cocci at systeme.lip6.fr
> https://systeme.lip6.fr/mailman/listinfo/cocci
>



-- 
Peter

[Cocci] coccinelle-1.0.0-rc18

[Jamal Khashan]

Hi Peter,

/coccinelle-1.0.0-rc18# ./configure --enable-release --without-pkg-config
configure: configuring coccinelle 1.0.0-rc17 in /root/conf/coccinelle-1.0.0-rc18
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/root/conf/coccinelle-1.0.0-rc18/setup/missing: Unknown '--is-lightweight' option
Try '/root/conf/coccinelle-1.0.0-rc18/setup/missing --help' for more information
configure: WARNING: 'missing' script is too old or missing
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
configure: determining version suffix
checking for date... /bin/date
configure: version suffix set to Wed, 04 Sep 2013 11:55:21 +0100
configure: this configure program uses pkg-config m4 macros
configure: this configure program uses ocaml m4 macros (see setup/ocaml.m4)
configure: this configure program uses custom m4 macros (see setup/cocci.m4)
configure: some fake substitutions for required but unavailable programs may be used (see setup/fake*)
configure: verifying basic tools
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... none
checking how to run the C preprocessor... gcc -E
checking for bash... /bin/bash
checking for tar... /bin/tar
checking for patch... /usr/bin/patch
checking for echo... /bin/echo
checking for patchelf... no
configure: pkg-config is disabled explicitly
checking for ocamlc... /usr/bin/ocamlc
OCaml version is 3.11.2
OCaml library path is /usr/lib/ocaml
checking for ocamlopt... /usr/bin/ocamlopt
checking for ocamlc.opt... /usr/bin/ocamlc.opt
checking for ocamlopt.opt... /usr/bin/ocamlopt.opt
checking for ocaml... /usr/bin/ocaml
checking for ocamldep... /usr/bin/ocamldep
checking for ocamlmktop... /usr/bin/ocamlmktop
checking for ocamlmklib... /usr/bin/ocamlmklib
checking for ocamldoc... /usr/bin/ocamldoc
checking for ocamlbuild... /usr/bin/ocamlbuild
checking that the OCaml version is at least 3.10... yes
checking that the OCaml version is at least 3.11... yes
checking for camlp4... /usr/bin/camlp4
checking for camlp4boot... no
checking for camlp4o... /usr/bin/camlp4o
checking for camlp4of... no
checking for camlp4oof... no
checking for camlp4orf... no
checking for camlp4prof... no
checking for camlp4r... /usr/bin/camlp4r
checking for camlp4rf... no
checking for ocamllex... /usr/bin/ocamllex
checking for ocamllex.opt... /usr/bin/ocamllex.opt
checking for ocamlyacc... /usr/bin/ocamlyacc
checking for ocamlfind... /usr/bin/ocamlfind
checking for ocamlprof... /usr/bin/ocamlprof
configure: verifying basic ocaml modules
configure: coccinelle may use external ocaml libraries in /root/conf/coccinelle-1.0.0-rc18/bundles
configure: the following OCaml packages should be provided by your ocaml installation
checking for OCaml findlib package unix... found
checking for OCaml findlib package bigarray... found
checking for OCaml findlib package num... found
checking for OCaml findlib package str... found
configure: configuring package dynlink
checking for OCaml findlib package dynlink... found
configure: configuring package camlp4
checking for OCaml findlib package camlp4... found
configure: configuring package menhirLib
checking for OCaml findlib package menhirLib... found
configure: verifying optional features
checking for menhir... /usr/bin/menhir
checking for python... /usr/bin/python
checking python version... 2.6 found
configure: python major version: 2
configure: looking for the corresponding python library
checking for PYTHON... no
configure: trying the default python library as fallback
checking for PYTHON... no
checking for PCRE... yes
configure: configuring package pcre
checking for OCaml findlib package pcre... not found
configure: OCaml package pcre is not available
checking for a bundled substitute of pcre... yes
configure: using bundled substitute for pcre in /root/conf/coccinelle-1.0.0-rc18/bundles/pcre/
configure: support for pcre syntax is enabled
checking for pdflatex... no
configure: pdflatex not found. Trying substitute /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex.
checking for pdflatex... /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex
configure: the optimized version of coccinelle will not be build by default due to OCaml version 3.11.2
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile.config
config.status: creating version.ml
config.status: creating commons/commands.ml
config.status: creating globals/config.ml
config.status: creating globals/regexp.ml
config.status: creating python/pycocci.ml
config.status: creating ocaml/prepare_ocamlcocci.ml
config.status: creating scripts/spatch.sh
config.status: creating docs/spatch.1
config.status: creating myocamlbuild.ml
config.status: creating setup/Makefile
config.status: executing depfiles commands
configure: configuration completed
------------------------------------------------------------------------------
Summary

configure flags:  --enable-release --without-pkg-config
findlib:          /usr/bin/ocamlfind    (an actual version is strongly recommended)
menhir:           /usr/bin/menhir       (should be an optional tool)
menhirLib module: yes   (for local package use --disable-menhirLib)

ocaml scripting:  yes   (overridable with --enable-ocaml)
python scripting: no    (overridable with --enable-python)
pycaml module:          (for local package use --disable-pycaml)

pcre regexes:     local (overridable with --enable-pcre-syntax)
pcre module:      local (for local package use --disable-pcre)
pcre library:     yes   (requires the dev version of libpcre)

release config:   yes   (strongly recommended to be 'yes', overridable with --enable-release)
optimized spatch: no    (overridable with --disable-opt)

------------------------------------------------------------------------------
Coccinelle can now be compiled and installed.


If you compile coccinelle again after source code changes or
configuration changes, you may need to run first:
  $ make clean

To compile coccinelle, run:
  $ make all

To install coccinelle, run:
  $ make install

Then, to test coccinelle, run for example:
  $ spatch -sp_file demos/simple.cocci demos/simple.c -o /tmp/new_simple.c

Or when coccinelle is not installed yet:
  $ COCCINELLE_HOME=/root/conf/coccinelle-1.0.0-rc18 ./scripts/spatch -sp_file demos/simple.cocci demos/simple.c -o /tmp/new_simple.c
------------------------------------------------------------------------------
#


Thanks and best regards,

Jamal Khashan
Dialog Semiconductors IT Helpdesk
Direct Dial: +49 (0)7021 805 555
Jamal.Khashan at diasemi.com |  www.diasemi.com
Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany


-----Original Message-----
From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
Sent: Tuesday, September 03, 2013 4:45 PM
To: Jamal Khashan
Cc: Julia Lawall; cocci at systeme.lip6.fr
Subject: Re: [Cocci] coccinelle-1.0.0-rc18

Hi Jamal,

Can you try to configure with:

$ ./configure --enable-release --without-pkg-config

Thanks,

Peter
...

On Tue, Sep 3, 2013 at 8:24 AM, Jamal Khashan <Jamal.Khashan at diasemi.com<mailto:Jamal.Khashan@diasemi.com>> wrote:
> Hi Julia,
>
> Thanks for your feedback.
>
> I think this version is a bit old?  Do you have the possibility to upgrade?
> Unfortunately I neither can upgrade Ubuntu nor python per feedback
> from my clients as follows " Hi Jamal, I've spoken with several other
> engineers and it would be a big risk to update python. We are using
> Gitorious (python) which manages all our software version control,
> also other people in different teams use python for their development
> and I do not know how this would affect those people.
> I think that his update would be too risky for us at the moment.
> Regards,
> Stephen
> "
>
> Can I supply any info, logs, configuration files etc that might assist
> in resolving this issue without OS or application upgrade?
>
>
> Thanks and best regards,
>
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com<mailto:Jamal.Khashan@diasemi.com> |  www.diasemi.com<http://www.diasemi.com> Dialog Semiconductor
> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>
>
> -----Original Message-----
> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
> Sent: Monday, September 02, 2013 3:22 PM
> To: Jamal Khashan
> Cc: 'cocci at systeme.lip6.fr'
> Subject: RE: [Cocci] coccinelle-1.0.0-rc18
>
> On Mon, 2 Sep 2013, Jamal Khashan wrote:
>
>> Hi Julia,
>>
>> Thanks for feedback, sorry for the late reply, I was on Vacation for
>> a week, but here's the output requested
>>
>> # lsb_release -a
>> No LSB modules are available.
>> Distributor ID: Ubuntu
>> Description:    Ubuntu 10.04.4 LTS
>> Release:        10.04
>> Codename:       lucid
>> #
>
> I think this version is a bit old?  Do you have the possibility to upgrade.
> On the other hand, it is the same version that I have at home, so I
> can try to reproduce the problem.
>
>> # pkg-config --exists --print-errors python-2.6 Package python-2.6
>> was not found in the pkg-config search path.
>> Perhaps you should add the directory containing `python-2.6.pc'
>> to the PKG_CONFIG_PATH environment variable No package 'python-2.6'
>> found #
>
> Do you just need to install python 2.6?  Did you install it separately
> from ubuntu?
>
> I don't know much about pkg-config.  Maybe someone else knows why you
> might have some software installed but pkg-config can't find it.
>
> julia
>
>> Thanks and best regards,
>>
>> Jamal Khashan
>> Dialog Semiconductors IT Helpdesk
>> Direct Dial: +49 (0)7021 805 555
>> Jamal.Khashan at diasemi.com<mailto:Jamal.Khashan@diasemi.com> |  www.diasemi.com<http://www.diasemi.com> Dialog Semiconductor
>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>
>>
>> -----Original Message-----
>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>> Sent: Saturday, August 24, 2013 8:12 AM
>> To: Jamal Khashan
>> Cc: 'cocci at systeme.lip6.fr'
>> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>>
>> > I am having difficulties enabling python scripting with
>> > coccinelle-1.0.0-rc18 as follows
>>
>> What OS/distribution are you using?  Perhaps the problem could be
>> that you have python 2.6?  I have 2.7.
>>
>> Maybe you should try something like
>>
>> pkg-config --exists --print-errors python-2.6
>>
>> julia
>> ________________________________
>>
>> Dialog Semiconductor GmbH
>> Neue Str. 95
>> D-73230 Kirchheim
>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>> of the Supervisory Board: Gregorio Reyes Commercial register:
>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668
>>
>> Legal Disclaimer: This e-mail communication (and any attachment/s) is
>> confidential and contains proprietary information, some or all of
>> which may be legally privileged. It is intended solely for the use of
>> the individual or entity to which it is addressed. Access to this
>> email by anyone else is unauthorized. If you are not the intended
>> recipient, any disclosure, copying, distribution or any action taken
>> or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>>
>> Please consider the environment before printing this e-mail
>>
>>
>>
>
>
>
>   ________________________________
>
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
> of the Supervisory Board: Gregorio Reyes Commercial register:
> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668 Legal
> Disclaimer: This e-mail communication (and any attachment/s) is
> confidential and contains proprietary information, some or all of
> which may be legally privileged. It is intended solely for the use of
> the individual or entity to which it is addressed. Access to this
> email by anyone else is unauthorized. If you are not the intended
> recipient, any disclosure, copying, distribution or any action taken
> or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>
> Please consider the environment before printing this e-mail
>
>
> _______________________________________________
> Cocci mailing list
> Cocci at systeme.lip6.fr<mailto:Cocci@systeme.lip6.fr>
> https://systeme.lip6.fr/mailman/listinfo/cocci
>



--
Peter



  ________________________________

Dialog Semiconductor GmbH
Neue Str. 95
D-73230 Kirchheim
Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
Chairman of the Supervisory Board: Gregorio Reyes
Commercial register: Amtsgericht Stuttgart: HRB 231181
UST-ID-Nr. DE 811121668

Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.

Please consider the environment before printing this e-mail
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://systeme.lip6.fr/pipermail/cocci/attachments/20130904/d00ee5c3/attachment-0001.html>

[Cocci] coccinelle-1.0.0-rc18

[Peter Senna Tschudin]

Hi Jamal,

This can be fixed by running:
$ sudo apt-get build-dep coccinelle

In order to this command to work, you need to enable the official
universe repository in the sources.list file. Both for packages and
sources. Mine looks like:

$ cat /etc/apt/sources.list
deb http://archive.ubuntu.com/ubuntu lucid main universe
deb-src http://archive.ubuntu.com/ubuntu lucid main universe

If you do changes in /etc/apt/sources.list, run `apt-get update` after
the changes.

Please let me know if this helped you.

On Wed, Sep 4, 2013 at 1:00 PM, Jamal Khashan <Jamal.Khashan@diasemi.com> wrote:
> Hi Peter,
>
> /coccinelle-1.0.0-rc18# ./configure --enable-release --without-pkg-config
> configure: configuring coccinelle 1.0.0-rc17 in
> /root/conf/coccinelle-1.0.0-rc18
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> /root/conf/coccinelle-1.0.0-rc18/setup/missing: Unknown '--is-lightweight'
> option
> Try '/root/conf/coccinelle-1.0.0-rc18/setup/missing --help' for more
> information
> configure: WARNING: 'missing' script is too old or missing
> checking for a thread-safe mkdir -p... /bin/mkdir -p
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking whether make supports nested variables... yes
> configure: determining version suffix
> checking for date... /bin/date
> configure: version suffix set to Wed, 04 Sep 2013 11:55:21 +0100
> configure: this configure program uses pkg-config m4 macros
> configure: this configure program uses ocaml m4 macros (see setup/ocaml.m4)
> configure: this configure program uses custom m4 macros (see setup/cocci.m4)
> configure: some fake substitutions for required but unavailable programs may
> be used (see setup/fake*)
> configure: verifying basic tools
> checking for style of include used by make... GNU
> checking for gcc... gcc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking whether gcc understands -c and -o together... yes
> checking dependency style of gcc... none
> checking how to run the C preprocessor... gcc -E
> checking for bash... /bin/bash
> checking for tar... /bin/tar
> checking for patch... /usr/bin/patch
> checking for echo... /bin/echo
> checking for patchelf... no
> configure: pkg-config is disabled explicitly
> checking for ocamlc... /usr/bin/ocamlc
> OCaml version is 3.11.2
> OCaml library path is /usr/lib/ocaml
> checking for ocamlopt... /usr/bin/ocamlopt
> checking for ocamlc.opt... /usr/bin/ocamlc.opt
> checking for ocamlopt.opt... /usr/bin/ocamlopt.opt
> checking for ocaml... /usr/bin/ocaml
> checking for ocamldep... /usr/bin/ocamldep
> checking for ocamlmktop... /usr/bin/ocamlmktop
> checking for ocamlmklib... /usr/bin/ocamlmklib
> checking for ocamldoc... /usr/bin/ocamldoc
> checking for ocamlbuild... /usr/bin/ocamlbuild
> checking that the OCaml version is at least 3.10... yes
> checking that the OCaml version is at least 3.11... yes
> checking for camlp4... /usr/bin/camlp4
> checking for camlp4boot... no
> checking for camlp4o... /usr/bin/camlp4o
> checking for camlp4of... no
> checking for camlp4oof... no
> checking for camlp4orf... no
> checking for camlp4prof... no
> checking for camlp4r... /usr/bin/camlp4r
> checking for camlp4rf... no
> checking for ocamllex... /usr/bin/ocamllex
> checking for ocamllex.opt... /usr/bin/ocamllex.opt
> checking for ocamlyacc... /usr/bin/ocamlyacc
> checking for ocamlfind... /usr/bin/ocamlfind
> checking for ocamlprof... /usr/bin/ocamlprof
> configure: verifying basic ocaml modules
> configure: coccinelle may use external ocaml libraries in
> /root/conf/coccinelle-1.0.0-rc18/bundles
> configure: the following OCaml packages should be provided by your ocaml
> installation
> checking for OCaml findlib package unix... found
> checking for OCaml findlib package bigarray... found
> checking for OCaml findlib package num... found
> checking for OCaml findlib package str... found
> configure: configuring package dynlink
> checking for OCaml findlib package dynlink... found
> configure: configuring package camlp4
> checking for OCaml findlib package camlp4... found
> configure: configuring package menhirLib
> checking for OCaml findlib package menhirLib... found
> configure: verifying optional features
> checking for menhir... /usr/bin/menhir
> checking for python... /usr/bin/python
> checking python version... 2.6 found
> configure: python major version: 2
> configure: looking for the corresponding python library
> checking for PYTHON... no
> configure: trying the default python library as fallback
> checking for PYTHON... no
> checking for PCRE... yes
> configure: configuring package pcre
> checking for OCaml findlib package pcre... not found
> configure: OCaml package pcre is not available
> checking for a bundled substitute of pcre... yes
> configure: using bundled substitute for pcre in
> /root/conf/coccinelle-1.0.0-rc18/bundles/pcre/
> configure: support for pcre syntax is enabled
> checking for pdflatex... no
> configure: pdflatex not found. Trying substitute
> /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex.
> checking for pdflatex...
> /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex
> configure: the optimized version of coccinelle will not be build by default
> due to OCaml version 3.11.2
> checking that generated files are newer than configure... done
> configure: creating ./config.status
> config.status: creating Makefile.config
> config.status: creating version.ml
> config.status: creating commons/commands.ml
> config.status: creating globals/config.ml
> config.status: creating globals/regexp.ml
> config.status: creating python/pycocci.ml
> config.status: creating ocaml/prepare_ocamlcocci.ml
> config.status: creating scripts/spatch.sh
> config.status: creating docs/spatch.1
> config.status: creating myocamlbuild.ml
> config.status: creating setup/Makefile
> config.status: executing depfiles commands
> configure: configuration completed
> ------------------------------------------------------------------------------
> Summary
>
> configure flags:  --enable-release --without-pkg-config
> findlib:          /usr/bin/ocamlfind    (an actual version is strongly
> recommended)
> menhir:           /usr/bin/menhir       (should be an optional tool)
> menhirLib module: yes   (for local package use --disable-menhirLib)
>
> ocaml scripting:  yes   (overridable with --enable-ocaml)
> python scripting: no    (overridable with --enable-python)
> pycaml module:          (for local package use --disable-pycaml)
>
> pcre regexes:     local (overridable with --enable-pcre-syntax)
> pcre module:      local (for local package use --disable-pcre)
> pcre library:     yes   (requires the dev version of libpcre)
>
> release config:   yes   (strongly recommended to be 'yes', overridable with
> --enable-release)
> optimized spatch: no    (overridable with --disable-opt)
>
> ------------------------------------------------------------------------------
> Coccinelle can now be compiled and installed.
>
>
> If you compile coccinelle again after source code changes or
> configuration changes, you may need to run first:
>   $ make clean
>
> To compile coccinelle, run:
>   $ make all
>
> To install coccinelle, run:
>   $ make install
>
> Then, to test coccinelle, run for example:
>   $ spatch -sp_file demos/simple.cocci demos/simple.c -o /tmp/new_simple.c
>
> Or when coccinelle is not installed yet:
>   $ COCCINELLE_HOME=/root/conf/coccinelle-1.0.0-rc18 ./scripts/spatch
> -sp_file demos/simple.cocci demos/simple.c -o /tmp/new_simple.c
> ------------------------------------------------------------------------------
> #
>
>
> Thanks and best regards,
>
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com |  www.diasemi.com
> Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>
>
> -----Original Message-----
> From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
> Sent: Tuesday, September 03, 2013 4:45 PM
> To: Jamal Khashan
> Cc: Julia Lawall; cocci at systeme.lip6.fr
> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>
> Hi Jamal,
>
> Can you try to configure with:
>
> $ ./configure --enable-release --without-pkg-config
>
> Thanks,
>
> Peter
> ...
>
> On Tue, Sep 3, 2013 at 8:24 AM, Jamal Khashan <Jamal.Khashan@diasemi.com>
> wrote:
>> Hi Julia,
>>
>> Thanks for your feedback.
>>
>> I think this version is a bit old?  Do you have the possibility to
>> upgrade?
>> Unfortunately I neither can upgrade Ubuntu nor python per feedback
>> from my clients as follows ? Hi Jamal, I've spoken with several other
>> engineers and it would be a big risk to update python. We are using
>> Gitorious (python) which manages all our software version control,
>> also other people in different teams use python for their development
>> and I do not know how this would affect those people.
>> I think that his update would be too risky for us at the moment.
>> Regards,
>> Stephen
>> ?
>>
>> Can I supply any info, logs, configuration files etc that might assist
>> in resolving this issue without OS or application upgrade?
>>
>>
>> Thanks and best regards,
>>
>> Jamal Khashan
>> Dialog Semiconductors IT Helpdesk
>> Direct Dial: +49 (0)7021 805 555
>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>
>>
>> -----Original Message-----
>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>> Sent: Monday, September 02, 2013 3:22 PM
>> To: Jamal Khashan
>> Cc: 'cocci at systeme.lip6.fr'
>> Subject: RE: [Cocci] coccinelle-1.0.0-rc18
>>
>> On Mon, 2 Sep 2013, Jamal Khashan wrote:
>>
>>> Hi Julia,
>>>
>>> Thanks for feedback, sorry for the late reply, I was on Vacation for
>>> a week, but here's the output requested
>>>
>>> # lsb_release -a
>>> No LSB modules are available.
>>> Distributor ID: Ubuntu
>>> Description:    Ubuntu 10.04.4 LTS
>>> Release:        10.04
>>> Codename:       lucid
>>> #
>>
>> I think this version is a bit old?  Do you have the possibility to
>> upgrade.
>> On the other hand, it is the same version that I have at home, so I
>> can try to reproduce the problem.
>>
>>> # pkg-config --exists --print-errors python-2.6 Package python-2.6
>>> was not found in the pkg-config search path.
>>> Perhaps you should add the directory containing `python-2.6.pc'
>>> to the PKG_CONFIG_PATH environment variable No package 'python-2.6'
>>> found #
>>
>> Do you just need to install python 2.6?  Did you install it separately
>> from ubuntu?
>>
>> I don't know much about pkg-config.  Maybe someone else knows why you
>> might have some software installed but pkg-config can't find it.
>>
>> julia
>>
>>> Thanks and best regards,
>>>
>>> Jamal Khashan
>>> Dialog Semiconductors IT Helpdesk
>>> Direct Dial: +49 (0)7021 805 555
>>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>>
>>>
>>> -----Original Message-----
>>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>>> Sent: Saturday, August 24, 2013 8:12 AM
>>> To: Jamal Khashan
>>> Cc: 'cocci at systeme.lip6.fr'
>>> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>>>
>>> > I am having difficulties enabling python scripting with
>>> > coccinelle-1.0.0-rc18 as follows
>>>
>>> What OS/distribution are you using?  Perhaps the problem could be
>>> that you have python 2.6?  I have 2.7.
>>>
>>> Maybe you should try something like
>>>
>>> pkg-config --exists --print-errors python-2.6
>>>
>>> julia
>>> ________________________________
>>>
>>> Dialog Semiconductor GmbH
>>> Neue Str. 95
>>> D-73230 Kirchheim
>>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>>> of the Supervisory Board: Gregorio Reyes Commercial register:
>>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668
>>>
>>> Legal Disclaimer: This e-mail communication (and any attachment/s) is
>>> confidential and contains proprietary information, some or all of
>>> which may be legally privileged. It is intended solely for the use of
>>> the individual or entity to which it is addressed. Access to this
>>> email by anyone else is unauthorized. If you are not the intended
>>> recipient, any disclosure, copying, distribution or any action taken
>>> or omitted to be taken in reliance on it, is prohibited and may be
>>> unlawful.
>>>
>>> Please consider the environment before printing this e-mail
>>>
>>>
>>>
>>
>>
>>
>>   ________________________________
>>
>> Dialog Semiconductor GmbH
>> Neue Str. 95
>> D-73230 Kirchheim
>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>> of the Supervisory Board: Gregorio Reyes Commercial register:
>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668 Legal
>> Disclaimer: This e-mail communication (and any attachment/s) is
>> confidential and contains proprietary information, some or all of
>> which may be legally privileged. It is intended solely for the use of
>> the individual or entity to which it is addressed. Access to this
>> email by anyone else is unauthorized. If you are not the intended
>> recipient, any disclosure, copying, distribution or any action taken
>> or omitted to be taken in reliance on it, is prohibited and may be
>> unlawful.
>>
>> Please consider the environment before printing this e-mail
>>
>>
>> _______________________________________________
>> Cocci mailing list
>> Cocci at systeme.lip6.fr
>> https://systeme.lip6.fr/mailman/listinfo/cocci
>>
>
>
>
> --
> Peter
>
>
>
>   ________________________________
>
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
> Chairman of the Supervisory Board: Gregorio Reyes
> Commercial register: Amtsgericht Stuttgart: HRB 231181
> UST-ID-Nr. DE 811121668
> Legal Disclaimer: This e-mail communication (and any attachment/s) is
> confidential and contains proprietary information, some or all of which may
> be legally privileged. It is intended solely for the use of the individual
> or entity to which it is addressed. Access to this email by anyone else is
> unauthorized. If you are not the intended recipient, any disclosure,
> copying, distribution or any action taken or omitted to be taken in reliance
> on it, is prohibited and may be unlawful.
>
> Please consider the environment before printing this e-mail
>



-- 
Peter

[Cocci] coccinelle-1.0.0-rc18

[Jamal Khashan]

Hi Peter,

Thanks again,  here's the output

root:/etc/apt# cat sources.list
deb http://archive.ubuntu.com/ubuntu lucid main universe deb-src http://archive.ubuntu.com/ubuntu lucid main universe
root:/etc/apt#

apt-get build-dep coccinelle
Reading package lists... Done
Building dependency tree
Reading state information... Done
W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ lucid/main Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_main_binary-amd64_Packages)
W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ lucid/universe Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_universe_binary-amd64_Packages)
W: Duplicate sources.list entry http://linux.dell.com/repo/community/deb/latest/  Packages (/var/lib/apt/lists/linux.dell.com_repo_community_deb_latest_Packages)
W: You may want to run apt-get update to correct these problems
E: You must put some 'source' URIs in your sources.list
root at swsrvapps-01:/etc/apt# apt-get update
Get:1 file:  Release.gpg [198B]
Get:2 file:  Release [337B]
Ign file:  Packages
Ign file:  Packages
Ign http://ppa.launchpad.net lucid Release.gpg
Ign http://ppa.launchpad.net lucid Release.gpg
Ign http://ppa.launchpad.net lucid Release.gpg
Hit http://archive.ubuntu.com lucid Release.gpg
Get:3 http://ppa.launchpad.net lucid Release.gpg [316B]
Ign http://ppa.launchpad.net lucid Release.gpg
Get:4 http://ppa.launchpad.net lucid Release.gpg [316B]
Get:5 http://ppa.launchpad.net lucid Release.gpg [316B]
Get:6 http://ppa.launchpad.net lucid Release.gpg [316B]
Ign http://ppa.launchpad.net lucid Release.gpg
Ign http://ppa.launchpad.net lucid Release.gpg
Ign http://ppa.launchpad.net lucid Release
Hit http://archive.ubuntu.com lucid Release
Ign http://ppa.launchpad.net lucid Release
Ign http://ppa.launchpad.net lucid Release
Get:7 http://ppa.launchpad.net lucid Release [13.9kB]
Ign http://ppa.launchpad.net lucid Release
Ign http://ppa.launchpad.net lucid Release
Get:8 http://ppa.launchpad.net lucid Release [14.0kB]
Get:9 http://ppa.launchpad.net lucid Release [13.9kB]
Get:10 http://ppa.launchpad.net lucid Release [13.9kB]
Ign http://ppa.launchpad.net lucid Release
Ign http://ppa.launchpad.net lucid Release
Ign http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid Release
Hit http://archive.ubuntu.com lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Hit http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid Release
Ign http://ppa.launchpad.net lucid Release
Ign http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Hit http://archive.ubuntu.com lucid/universe Packages
Ign http://ppa.launchpad.net lucid/main Packages
Hit http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Hit http://ppa.launchpad.net lucid/main Packages
Hit http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Ign http://ppa.launchpad.net lucid/main Packages
Err http://ppa.launchpad.net lucid/main Packages
  404  Not Found
Err http://ppa.launchpad.net lucid/main Packages
  404  Not Found
Err http://ppa.launchpad.net lucid/main Packages
  404  Not Found
Err http://ppa.launchpad.net lucid/main Packages
  404  Not Found
Err http://ppa.launchpad.net lucid/main Packages
  404  Not Found
Err http://ppa.launchpad.net lucid/main Packages
  404  Not Found
Hit http://www.scootersoftware.com stable Release.gpg
Get:11 http://linux.dell.com  Release.gpg [827B]
Hit http://www.scootersoftware.com stable Release
Get:12 http://linux.dell.com  Release [1392B]
Ign http://linux.dell.com  Release
Ign http://www.scootersoftware.com stable/non-free Packages
Hit http://linux.dell.com  Packages
Ign http://www.scootersoftware.com stable/non-free Packages
Hit http://www.scootersoftware.com stable/non-free Packages
Fetched 2096B in 1s (1800B/s)
W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2A8E3034D018A4CE
W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 83FBA1751378B444
W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 83FBA1751378B444
W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1624804B84ACD041
W: GPG error: http://linux.dell.com  Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1285491434D8786F
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/lucid/Release  Unable to find expected entry  deb-src/binary-amd64/Packages in Meta-index file (malformed Release file?)

W: Failed to fetch http://ppa.launchpad.net/Coccinelle/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found

W: Failed to fetch http://ppa.launchpad.net/coccicheck/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found

W: Failed to fetch http://ppa.launchpad.net/cubs/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found

W: Failed to fetch http://ppa.launchpad.net/libpycaml-ocaml-dev/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found

W: Failed to fetch http://ppa.launchpad.net/ocaml-findlib/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found

W: Failed to fetch http://ppa.launchpad.net/spatch/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found

E: Some index files failed to download, they have been ignored, or old ones used instead.
root@:/etc/apt#

Thanks and best regards,

Jamal Khashan
Dialog Semiconductors IT Helpdesk
Direct Dial: +49 (0)7021 805 555
Jamal.Khashan at diasemi.com |  www.diasemi.com
Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany



-----Original Message-----
From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
Sent: Wednesday, September 04, 2013 1:07 PM
To: Jamal Khashan
Cc: Julia Lawall; cocci at systeme.lip6.fr
Subject: Re: [Cocci] coccinelle-1.0.0-rc18

Hi Jamal,

This can be fixed by running:
$ sudo apt-get build-dep coccinelle

In order to this command to work, you need to enable the official universe repository in the sources.list file. Both for packages and sources. Mine looks like:

$ cat /etc/apt/sources.list
deb http://archive.ubuntu.com/ubuntu lucid main universe deb-src http://archive.ubuntu.com/ubuntu lucid main universe

If you do changes in /etc/apt/sources.list, run `apt-get update` after the changes.

Please let me know if this helped you.

On Wed, Sep 4, 2013 at 1:00 PM, Jamal Khashan <Jamal.Khashan@diasemi.com> wrote:
> Hi Peter,
>
> /coccinelle-1.0.0-rc18# ./configure --enable-release
> --without-pkg-config
> configure: configuring coccinelle 1.0.0-rc17 in
> /root/conf/coccinelle-1.0.0-rc18
> checking for a BSD-compatible install... /usr/bin/install -c checking
> whether build environment is sane... yes
> /root/conf/coccinelle-1.0.0-rc18/setup/missing: Unknown '--is-lightweight'
> option
> Try '/root/conf/coccinelle-1.0.0-rc18/setup/missing --help' for more
> information
> configure: WARNING: 'missing' script is too old or missing checking
> for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk
> checking whether make sets $(MAKE)... yes checking whether make
> supports nested variables... yes
> configure: determining version suffix
> checking for date... /bin/date
> configure: version suffix set to Wed, 04 Sep 2013 11:55:21 +0100
> configure: this configure program uses pkg-config m4 macros
> configure: this configure program uses ocaml m4 macros (see
> setup/ocaml.m4)
> configure: this configure program uses custom m4 macros (see
> setup/cocci.m4)
> configure: some fake substitutions for required but unavailable
> programs may be used (see setup/fake*)
> configure: verifying basic tools
> checking for style of include used by make... GNU checking for gcc...
> gcc checking whether the C compiler works... yes checking for C
> compiler default output file name... a.out checking for suffix of
> executables...
> checking whether we are cross compiling... no checking for suffix of
> object files... o checking whether we are using the GNU C compiler...
> yes checking whether gcc accepts -g... yes checking for gcc option to
> accept ISO C89... none needed checking whether gcc understands -c and
> -o together... yes checking dependency style of gcc... none checking
> how to run the C preprocessor... gcc -E checking for bash... /bin/bash
> checking for tar... /bin/tar checking for patch... /usr/bin/patch
> checking for echo... /bin/echo checking for patchelf... no
> configure: pkg-config is disabled explicitly checking for ocamlc...
> /usr/bin/ocamlc OCaml version is 3.11.2 OCaml library path is
> /usr/lib/ocaml checking for ocamlopt... /usr/bin/ocamlopt checking for
> ocamlc.opt... /usr/bin/ocamlc.opt checking for ocamlopt.opt...
> /usr/bin/ocamlopt.opt checking for ocaml... /usr/bin/ocaml checking
> for ocamldep... /usr/bin/ocamldep checking for ocamlmktop...
> /usr/bin/ocamlmktop checking for ocamlmklib... /usr/bin/ocamlmklib
> checking for ocamldoc... /usr/bin/ocamldoc checking for ocamlbuild...
> /usr/bin/ocamlbuild checking that the OCaml version is at least
> 3.10... yes checking that the OCaml version is at least 3.11... yes
> checking for camlp4... /usr/bin/camlp4 checking for camlp4boot... no
> checking for camlp4o... /usr/bin/camlp4o checking for camlp4of... no
> checking for camlp4oof... no checking for camlp4orf... no checking for
> camlp4prof... no checking for camlp4r... /usr/bin/camlp4r checking for
> camlp4rf... no checking for ocamllex... /usr/bin/ocamllex checking for
> ocamllex.opt... /usr/bin/ocamllex.opt checking for ocamlyacc...
> /usr/bin/ocamlyacc checking for ocamlfind... /usr/bin/ocamlfind
> checking for ocamlprof... /usr/bin/ocamlprof
> configure: verifying basic ocaml modules
> configure: coccinelle may use external ocaml libraries in
> /root/conf/coccinelle-1.0.0-rc18/bundles
> configure: the following OCaml packages should be provided by your
> ocaml installation checking for OCaml findlib package unix... found
> checking for OCaml findlib package bigarray... found checking for
> OCaml findlib package num... found checking for OCaml findlib package
> str... found
> configure: configuring package dynlink checking for OCaml findlib
> package dynlink... found
> configure: configuring package camlp4
> checking for OCaml findlib package camlp4... found
> configure: configuring package menhirLib checking for OCaml findlib
> package menhirLib... found
> configure: verifying optional features checking for menhir...
> /usr/bin/menhir checking for python... /usr/bin/python checking python
> version... 2.6 found
> configure: python major version: 2
> configure: looking for the corresponding python library checking for
> PYTHON... no
> configure: trying the default python library as fallback checking for
> PYTHON... no checking for PCRE... yes
> configure: configuring package pcre
> checking for OCaml findlib package pcre... not found
> configure: OCaml package pcre is not available checking for a bundled
> substitute of pcre... yes
> configure: using bundled substitute for pcre in
> /root/conf/coccinelle-1.0.0-rc18/bundles/pcre/
> configure: support for pcre syntax is enabled checking for pdflatex...
> no
> configure: pdflatex not found. Trying substitute
> /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex.
> checking for pdflatex...
> /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex
> configure: the optimized version of coccinelle will not be build by
> default due to OCaml version 3.11.2 checking that generated files are
> newer than configure... done
> configure: creating ./config.status
> config.status: creating Makefile.config
> config.status: creating version.ml
> config.status: creating commons/commands.ml
> config.status: creating globals/config.ml
> config.status: creating globals/regexp.ml
> config.status: creating python/pycocci.ml
> config.status: creating ocaml/prepare_ocamlcocci.ml
> config.status: creating scripts/spatch.sh
> config.status: creating docs/spatch.1
> config.status: creating myocamlbuild.ml
> config.status: creating setup/Makefile
> config.status: executing depfiles commands
> configure: configuration completed
> ----------------------------------------------------------------------
> --------
> Summary
>
> configure flags:  --enable-release --without-pkg-config
> findlib:          /usr/bin/ocamlfind    (an actual version is strongly
> recommended)
> menhir:           /usr/bin/menhir       (should be an optional tool)
> menhirLib module: yes   (for local package use --disable-menhirLib)
>
> ocaml scripting:  yes   (overridable with --enable-ocaml)
> python scripting: no    (overridable with --enable-python)
> pycaml module:          (for local package use --disable-pycaml)
>
> pcre regexes:     local (overridable with --enable-pcre-syntax)
> pcre module:      local (for local package use --disable-pcre)
> pcre library:     yes   (requires the dev version of libpcre)
>
> release config:   yes   (strongly recommended to be 'yes', overridable with
> --enable-release)
> optimized spatch: no    (overridable with --disable-opt)
>
> ----------------------------------------------------------------------
> -------- Coccinelle can now be compiled and installed.
>
>
> If you compile coccinelle again after source code changes or
> configuration changes, you may need to run first:
>   $ make clean
>
> To compile coccinelle, run:
>   $ make all
>
> To install coccinelle, run:
>   $ make install
>
> Then, to test coccinelle, run for example:
>   $ spatch -sp_file demos/simple.cocci demos/simple.c -o
> /tmp/new_simple.c
>
> Or when coccinelle is not installed yet:
>   $ COCCINELLE_HOME=/root/conf/coccinelle-1.0.0-rc18 ./scripts/spatch
> -sp_file demos/simple.cocci demos/simple.c -o /tmp/new_simple.c
> ----------------------------------------------------------------------
> --------
> #
>
>
> Thanks and best regards,
>
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>
>
> -----Original Message-----
> From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
> Sent: Tuesday, September 03, 2013 4:45 PM
> To: Jamal Khashan
> Cc: Julia Lawall; cocci at systeme.lip6.fr
> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>
> Hi Jamal,
>
> Can you try to configure with:
>
> $ ./configure --enable-release --without-pkg-config
>
> Thanks,
>
> Peter
> ...
>
> On Tue, Sep 3, 2013 at 8:24 AM, Jamal Khashan
> <Jamal.Khashan@diasemi.com>
> wrote:
>> Hi Julia,
>>
>> Thanks for your feedback.
>>
>> I think this version is a bit old?  Do you have the possibility to
>> upgrade?
>> Unfortunately I neither can upgrade Ubuntu nor python per feedback
>> from my clients as follows " Hi Jamal, I've spoken with several other
>> engineers and it would be a big risk to update python. We are using
>> Gitorious (python) which manages all our software version control,
>> also other people in different teams use python for their development
>> and I do not know how this would affect those people.
>> I think that his update would be too risky for us at the moment.
>> Regards,
>> Stephen
>> "
>>
>> Can I supply any info, logs, configuration files etc that might
>> assist in resolving this issue without OS or application upgrade?
>>
>>
>> Thanks and best regards,
>>
>> Jamal Khashan
>> Dialog Semiconductors IT Helpdesk
>> Direct Dial: +49 (0)7021 805 555
>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>
>>
>> -----Original Message-----
>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>> Sent: Monday, September 02, 2013 3:22 PM
>> To: Jamal Khashan
>> Cc: 'cocci at systeme.lip6.fr'
>> Subject: RE: [Cocci] coccinelle-1.0.0-rc18
>>
>> On Mon, 2 Sep 2013, Jamal Khashan wrote:
>>
>>> Hi Julia,
>>>
>>> Thanks for feedback, sorry for the late reply, I was on Vacation for
>>> a week, but here's the output requested
>>>
>>> # lsb_release -a
>>> No LSB modules are available.
>>> Distributor ID: Ubuntu
>>> Description:    Ubuntu 10.04.4 LTS
>>> Release:        10.04
>>> Codename:       lucid
>>> #
>>
>> I think this version is a bit old?  Do you have the possibility to
>> upgrade.
>> On the other hand, it is the same version that I have at home, so I
>> can try to reproduce the problem.
>>
>>> # pkg-config --exists --print-errors python-2.6 Package python-2.6
>>> was not found in the pkg-config search path.
>>> Perhaps you should add the directory containing `python-2.6.pc'
>>> to the PKG_CONFIG_PATH environment variable No package 'python-2.6'
>>> found #
>>
>> Do you just need to install python 2.6?  Did you install it
>> separately from ubuntu?
>>
>> I don't know much about pkg-config.  Maybe someone else knows why you
>> might have some software installed but pkg-config can't find it.
>>
>> julia
>>
>>> Thanks and best regards,
>>>
>>> Jamal Khashan
>>> Dialog Semiconductors IT Helpdesk
>>> Direct Dial: +49 (0)7021 805 555
>>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>>
>>>
>>> -----Original Message-----
>>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>>> Sent: Saturday, August 24, 2013 8:12 AM
>>> To: Jamal Khashan
>>> Cc: 'cocci at systeme.lip6.fr'
>>> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>>>
>>> > I am having difficulties enabling python scripting with
>>> > coccinelle-1.0.0-rc18 as follows
>>>
>>> What OS/distribution are you using?  Perhaps the problem could be
>>> that you have python 2.6?  I have 2.7.
>>>
>>> Maybe you should try something like
>>>
>>> pkg-config --exists --print-errors python-2.6
>>>
>>> julia
>>> ________________________________
>>>
>>> Dialog Semiconductor GmbH
>>> Neue Str. 95
>>> D-73230 Kirchheim
>>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>>> of the Supervisory Board: Gregorio Reyes Commercial register:
>>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668
>>>
>>> Legal Disclaimer: This e-mail communication (and any attachment/s)
>>> is confidential and contains proprietary information, some or all of
>>> which may be legally privileged. It is intended solely for the use
>>> of the individual or entity to which it is addressed. Access to this
>>> email by anyone else is unauthorized. If you are not the intended
>>> recipient, any disclosure, copying, distribution or any action taken
>>> or omitted to be taken in reliance on it, is prohibited and may be
>>> unlawful.
>>>
>>> Please consider the environment before printing this e-mail
>>>
>>>
>>>
>>
>>
>>
>>   ________________________________
>>
>> Dialog Semiconductor GmbH
>> Neue Str. 95
>> D-73230 Kirchheim
>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>> of the Supervisory Board: Gregorio Reyes Commercial register:
>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668 Legal
>> Disclaimer: This e-mail communication (and any attachment/s) is
>> confidential and contains proprietary information, some or all of
>> which may be legally privileged. It is intended solely for the use of
>> the individual or entity to which it is addressed. Access to this
>> email by anyone else is unauthorized. If you are not the intended
>> recipient, any disclosure, copying, distribution or any action taken
>> or omitted to be taken in reliance on it, is prohibited and may be
>> unlawful.
>>
>> Please consider the environment before printing this e-mail
>>
>>
>> _______________________________________________
>> Cocci mailing list
>> Cocci at systeme.lip6.fr
>> https://systeme.lip6.fr/mailman/listinfo/cocci
>>
>
>
>
> --
> Peter
>
>
>
>   ________________________________
>
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
> of the Supervisory Board: Gregorio Reyes Commercial register:
> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668 Legal
> Disclaimer: This e-mail communication (and any attachment/s) is
> confidential and contains proprietary information, some or all of
> which may be legally privileged. It is intended solely for the use of
> the individual or entity to which it is addressed. Access to this
> email by anyone else is unauthorized. If you are not the intended
> recipient, any disclosure, copying, distribution or any action taken
> or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>
> Please consider the environment before printing this e-mail
>



--
Peter
________________________________

Dialog Semiconductor GmbH
Neue Str. 95
D-73230 Kirchheim
Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
Chairman of the Supervisory Board: Gregorio Reyes
Commercial register: Amtsgericht Stuttgart: HRB 231181
UST-ID-Nr. DE 811121668

Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.

Please consider the environment before printing this e-mail

[Cocci] coccinelle-1.0.0-rc18

[Peter Senna Tschudin]

Looks like that there is one error in the file, there is a missing new
line before deb-src...
The content should be one entry / line, like:

deb http://archive.ubuntu.com/ubuntu lucid main universe
deb-src http://archive.ubuntu.com/ubuntu lucid main universe

Can you please check that there is one entry / line?

On Wed, Sep 4, 2013 at 1:13 PM, Jamal Khashan <Jamal.Khashan@diasemi.com> wrote:
> Hi Peter,
>
> Thanks again,  here's the output
>
> root:/etc/apt# cat sources.list
> deb http://archive.ubuntu.com/ubuntu lucid main universe deb-src http://archive.ubuntu.com/ubuntu lucid main universe
> root:/etc/apt#
>
> apt-get build-dep coccinelle
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ lucid/main Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_main_binary-amd64_Packages)
> W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ lucid/universe Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_universe_binary-amd64_Packages)
> W: Duplicate sources.list entry http://linux.dell.com/repo/community/deb/latest/  Packages (/var/lib/apt/lists/linux.dell.com_repo_community_deb_latest_Packages)
> W: You may want to run apt-get update to correct these problems
> E: You must put some 'source' URIs in your sources.list
> root at swsrvapps-01:/etc/apt# apt-get update
> Get:1 file:  Release.gpg [198B]
> Get:2 file:  Release [337B]
> Ign file:  Packages
> Ign file:  Packages
> Ign http://ppa.launchpad.net lucid Release.gpg
> Ign http://ppa.launchpad.net lucid Release.gpg
> Ign http://ppa.launchpad.net lucid Release.gpg
> Hit http://archive.ubuntu.com lucid Release.gpg
> Get:3 http://ppa.launchpad.net lucid Release.gpg [316B]
> Ign http://ppa.launchpad.net lucid Release.gpg
> Get:4 http://ppa.launchpad.net lucid Release.gpg [316B]
> Get:5 http://ppa.launchpad.net lucid Release.gpg [316B]
> Get:6 http://ppa.launchpad.net lucid Release.gpg [316B]
> Ign http://ppa.launchpad.net lucid Release.gpg
> Ign http://ppa.launchpad.net lucid Release.gpg
> Ign http://ppa.launchpad.net lucid Release
> Hit http://archive.ubuntu.com lucid Release
> Ign http://ppa.launchpad.net lucid Release
> Ign http://ppa.launchpad.net lucid Release
> Get:7 http://ppa.launchpad.net lucid Release [13.9kB]
> Ign http://ppa.launchpad.net lucid Release
> Ign http://ppa.launchpad.net lucid Release
> Get:8 http://ppa.launchpad.net lucid Release [14.0kB]
> Get:9 http://ppa.launchpad.net lucid Release [13.9kB]
> Get:10 http://ppa.launchpad.net lucid Release [13.9kB]
> Ign http://ppa.launchpad.net lucid Release
> Ign http://ppa.launchpad.net lucid Release
> Ign http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid Release
> Hit http://archive.ubuntu.com lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Hit http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid Release
> Ign http://ppa.launchpad.net lucid Release
> Ign http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Hit http://archive.ubuntu.com lucid/universe Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Hit http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Hit http://ppa.launchpad.net lucid/main Packages
> Hit http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Hit http://www.scootersoftware.com stable Release.gpg
> Get:11 http://linux.dell.com  Release.gpg [827B]
> Hit http://www.scootersoftware.com stable Release
> Get:12 http://linux.dell.com  Release [1392B]
> Ign http://linux.dell.com  Release
> Ign http://www.scootersoftware.com stable/non-free Packages
> Hit http://linux.dell.com  Packages
> Ign http://www.scootersoftware.com stable/non-free Packages
> Hit http://www.scootersoftware.com stable/non-free Packages
> Fetched 2096B in 1s (1800B/s)
> W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2A8E3034D018A4CE
> W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 83FBA1751378B444
> W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 83FBA1751378B444
> W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1624804B84ACD041
> W: GPG error: http://linux.dell.com  Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1285491434D8786F
> W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/lucid/Release  Unable to find expected entry  deb-src/binary-amd64/Packages in Meta-index file (malformed Release file?)
>
> W: Failed to fetch http://ppa.launchpad.net/Coccinelle/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch http://ppa.launchpad.net/coccicheck/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch http://ppa.launchpad.net/cubs/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch http://ppa.launchpad.net/libpycaml-ocaml-dev/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch http://ppa.launchpad.net/ocaml-findlib/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch http://ppa.launchpad.net/spatch/ppa/ubuntu/dists/lucid/main/binary-amd64/Packages.gz  404  Not Found
>
> E: Some index files failed to download, they have been ignored, or old ones used instead.
> root@:/etc/apt#
>
> Thanks and best regards,
>
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com |  www.diasemi.com
> Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>
>
>
> -----Original Message-----
> From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
> Sent: Wednesday, September 04, 2013 1:07 PM
> To: Jamal Khashan
> Cc: Julia Lawall; cocci at systeme.lip6.fr
> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>
> Hi Jamal,
>
> This can be fixed by running:
> $ sudo apt-get build-dep coccinelle
>
> In order to this command to work, you need to enable the official universe repository in the sources.list file. Both for packages and sources. Mine looks like:
>
> $ cat /etc/apt/sources.list
> deb http://archive.ubuntu.com/ubuntu lucid main universe deb-src http://archive.ubuntu.com/ubuntu lucid main universe
>
> If you do changes in /etc/apt/sources.list, run `apt-get update` after the changes.
>
> Please let me know if this helped you.
>
> On Wed, Sep 4, 2013 at 1:00 PM, Jamal Khashan <Jamal.Khashan@diasemi.com> wrote:
>> Hi Peter,
>>
>> /coccinelle-1.0.0-rc18# ./configure --enable-release
>> --without-pkg-config
>> configure: configuring coccinelle 1.0.0-rc17 in
>> /root/conf/coccinelle-1.0.0-rc18
>> checking for a BSD-compatible install... /usr/bin/install -c checking
>> whether build environment is sane... yes
>> /root/conf/coccinelle-1.0.0-rc18/setup/missing: Unknown '--is-lightweight'
>> option
>> Try '/root/conf/coccinelle-1.0.0-rc18/setup/missing --help' for more
>> information
>> configure: WARNING: 'missing' script is too old or missing checking
>> for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk
>> checking whether make sets $(MAKE)... yes checking whether make
>> supports nested variables... yes
>> configure: determining version suffix
>> checking for date... /bin/date
>> configure: version suffix set to Wed, 04 Sep 2013 11:55:21 +0100
>> configure: this configure program uses pkg-config m4 macros
>> configure: this configure program uses ocaml m4 macros (see
>> setup/ocaml.m4)
>> configure: this configure program uses custom m4 macros (see
>> setup/cocci.m4)
>> configure: some fake substitutions for required but unavailable
>> programs may be used (see setup/fake*)
>> configure: verifying basic tools
>> checking for style of include used by make... GNU checking for gcc...
>> gcc checking whether the C compiler works... yes checking for C
>> compiler default output file name... a.out checking for suffix of
>> executables...
>> checking whether we are cross compiling... no checking for suffix of
>> object files... o checking whether we are using the GNU C compiler...
>> yes checking whether gcc accepts -g... yes checking for gcc option to
>> accept ISO C89... none needed checking whether gcc understands -c and
>> -o together... yes checking dependency style of gcc... none checking
>> how to run the C preprocessor... gcc -E checking for bash... /bin/bash
>> checking for tar... /bin/tar checking for patch... /usr/bin/patch
>> checking for echo... /bin/echo checking for patchelf... no
>> configure: pkg-config is disabled explicitly checking for ocamlc...
>> /usr/bin/ocamlc OCaml version is 3.11.2 OCaml library path is
>> /usr/lib/ocaml checking for ocamlopt... /usr/bin/ocamlopt checking for
>> ocamlc.opt... /usr/bin/ocamlc.opt checking for ocamlopt.opt...
>> /usr/bin/ocamlopt.opt checking for ocaml... /usr/bin/ocaml checking
>> for ocamldep... /usr/bin/ocamldep checking for ocamlmktop...
>> /usr/bin/ocamlmktop checking for ocamlmklib... /usr/bin/ocamlmklib
>> checking for ocamldoc... /usr/bin/ocamldoc checking for ocamlbuild...
>> /usr/bin/ocamlbuild checking that the OCaml version is at least
>> 3.10... yes checking that the OCaml version is at least 3.11... yes
>> checking for camlp4... /usr/bin/camlp4 checking for camlp4boot... no
>> checking for camlp4o... /usr/bin/camlp4o checking for camlp4of... no
>> checking for camlp4oof... no checking for camlp4orf... no checking for
>> camlp4prof... no checking for camlp4r... /usr/bin/camlp4r checking for
>> camlp4rf... no checking for ocamllex... /usr/bin/ocamllex checking for
>> ocamllex.opt... /usr/bin/ocamllex.opt checking for ocamlyacc...
>> /usr/bin/ocamlyacc checking for ocamlfind... /usr/bin/ocamlfind
>> checking for ocamlprof... /usr/bin/ocamlprof
>> configure: verifying basic ocaml modules
>> configure: coccinelle may use external ocaml libraries in
>> /root/conf/coccinelle-1.0.0-rc18/bundles
>> configure: the following OCaml packages should be provided by your
>> ocaml installation checking for OCaml findlib package unix... found
>> checking for OCaml findlib package bigarray... found checking for
>> OCaml findlib package num... found checking for OCaml findlib package
>> str... found
>> configure: configuring package dynlink checking for OCaml findlib
>> package dynlink... found
>> configure: configuring package camlp4
>> checking for OCaml findlib package camlp4... found
>> configure: configuring package menhirLib checking for OCaml findlib
>> package menhirLib... found
>> configure: verifying optional features checking for menhir...
>> /usr/bin/menhir checking for python... /usr/bin/python checking python
>> version... 2.6 found
>> configure: python major version: 2
>> configure: looking for the corresponding python library checking for
>> PYTHON... no
>> configure: trying the default python library as fallback checking for
>> PYTHON... no checking for PCRE... yes
>> configure: configuring package pcre
>> checking for OCaml findlib package pcre... not found
>> configure: OCaml package pcre is not available checking for a bundled
>> substitute of pcre... yes
>> configure: using bundled substitute for pcre in
>> /root/conf/coccinelle-1.0.0-rc18/bundles/pcre/
>> configure: support for pcre syntax is enabled checking for pdflatex...
>> no
>> configure: pdflatex not found. Trying substitute
>> /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex.
>> checking for pdflatex...
>> /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex
>> configure: the optimized version of coccinelle will not be build by
>> default due to OCaml version 3.11.2 checking that generated files are
>> newer than configure... done
>> configure: creating ./config.status
>> config.status: creating Makefile.config
>> config.status: creating version.ml
>> config.status: creating commons/commands.ml
>> config.status: creating globals/config.ml
>> config.status: creating globals/regexp.ml
>> config.status: creating python/pycocci.ml
>> config.status: creating ocaml/prepare_ocamlcocci.ml
>> config.status: creating scripts/spatch.sh
>> config.status: creating docs/spatch.1
>> config.status: creating myocamlbuild.ml
>> config.status: creating setup/Makefile
>> config.status: executing depfiles commands
>> configure: configuration completed
>> ----------------------------------------------------------------------
>> --------
>> Summary
>>
>> configure flags:  --enable-release --without-pkg-config
>> findlib:          /usr/bin/ocamlfind    (an actual version is strongly
>> recommended)
>> menhir:           /usr/bin/menhir       (should be an optional tool)
>> menhirLib module: yes   (for local package use --disable-menhirLib)
>>
>> ocaml scripting:  yes   (overridable with --enable-ocaml)
>> python scripting: no    (overridable with --enable-python)
>> pycaml module:          (for local package use --disable-pycaml)
>>
>> pcre regexes:     local (overridable with --enable-pcre-syntax)
>> pcre module:      local (for local package use --disable-pcre)
>> pcre library:     yes   (requires the dev version of libpcre)
>>
>> release config:   yes   (strongly recommended to be 'yes', overridable with
>> --enable-release)
>> optimized spatch: no    (overridable with --disable-opt)
>>
>> ----------------------------------------------------------------------
>> -------- Coccinelle can now be compiled and installed.
>>
>>
>> If you compile coccinelle again after source code changes or
>> configuration changes, you may need to run first:
>>   $ make clean
>>
>> To compile coccinelle, run:
>>   $ make all
>>
>> To install coccinelle, run:
>>   $ make install
>>
>> Then, to test coccinelle, run for example:
>>   $ spatch -sp_file demos/simple.cocci demos/simple.c -o
>> /tmp/new_simple.c
>>
>> Or when coccinelle is not installed yet:
>>   $ COCCINELLE_HOME=/root/conf/coccinelle-1.0.0-rc18 ./scripts/spatch
>> -sp_file demos/simple.cocci demos/simple.c -o /tmp/new_simple.c
>> ----------------------------------------------------------------------
>> --------
>> #
>>
>>
>> Thanks and best regards,
>>
>> Jamal Khashan
>> Dialog Semiconductors IT Helpdesk
>> Direct Dial: +49 (0)7021 805 555
>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>
>>
>> -----Original Message-----
>> From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
>> Sent: Tuesday, September 03, 2013 4:45 PM
>> To: Jamal Khashan
>> Cc: Julia Lawall; cocci at systeme.lip6.fr
>> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>>
>> Hi Jamal,
>>
>> Can you try to configure with:
>>
>> $ ./configure --enable-release --without-pkg-config
>>
>> Thanks,
>>
>> Peter
>> ...
>>
>> On Tue, Sep 3, 2013 at 8:24 AM, Jamal Khashan
>> <Jamal.Khashan@diasemi.com>
>> wrote:
>>> Hi Julia,
>>>
>>> Thanks for your feedback.
>>>
>>> I think this version is a bit old?  Do you have the possibility to
>>> upgrade?
>>> Unfortunately I neither can upgrade Ubuntu nor python per feedback
>>> from my clients as follows " Hi Jamal, I've spoken with several other
>>> engineers and it would be a big risk to update python. We are using
>>> Gitorious (python) which manages all our software version control,
>>> also other people in different teams use python for their development
>>> and I do not know how this would affect those people.
>>> I think that his update would be too risky for us at the moment.
>>> Regards,
>>> Stephen
>>> "
>>>
>>> Can I supply any info, logs, configuration files etc that might
>>> assist in resolving this issue without OS or application upgrade?
>>>
>>>
>>> Thanks and best regards,
>>>
>>> Jamal Khashan
>>> Dialog Semiconductors IT Helpdesk
>>> Direct Dial: +49 (0)7021 805 555
>>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>>
>>>
>>> -----Original Message-----
>>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>>> Sent: Monday, September 02, 2013 3:22 PM
>>> To: Jamal Khashan
>>> Cc: 'cocci at systeme.lip6.fr'
>>> Subject: RE: [Cocci] coccinelle-1.0.0-rc18
>>>
>>> On Mon, 2 Sep 2013, Jamal Khashan wrote:
>>>
>>>> Hi Julia,
>>>>
>>>> Thanks for feedback, sorry for the late reply, I was on Vacation for
>>>> a week, but here's the output requested
>>>>
>>>> # lsb_release -a
>>>> No LSB modules are available.
>>>> Distributor ID: Ubuntu
>>>> Description:    Ubuntu 10.04.4 LTS
>>>> Release:        10.04
>>>> Codename:       lucid
>>>> #
>>>
>>> I think this version is a bit old?  Do you have the possibility to
>>> upgrade.
>>> On the other hand, it is the same version that I have at home, so I
>>> can try to reproduce the problem.
>>>
>>>> # pkg-config --exists --print-errors python-2.6 Package python-2.6
>>>> was not found in the pkg-config search path.
>>>> Perhaps you should add the directory containing `python-2.6.pc'
>>>> to the PKG_CONFIG_PATH environment variable No package 'python-2.6'
>>>> found #
>>>
>>> Do you just need to install python 2.6?  Did you install it
>>> separately from ubuntu?
>>>
>>> I don't know much about pkg-config.  Maybe someone else knows why you
>>> might have some software installed but pkg-config can't find it.
>>>
>>> julia
>>>
>>>> Thanks and best regards,
>>>>
>>>> Jamal Khashan
>>>> Dialog Semiconductors IT Helpdesk
>>>> Direct Dial: +49 (0)7021 805 555
>>>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>>>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>>>> Sent: Saturday, August 24, 2013 8:12 AM
>>>> To: Jamal Khashan
>>>> Cc: 'cocci at systeme.lip6.fr'
>>>> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>>>>
>>>> > I am having difficulties enabling python scripting with
>>>> > coccinelle-1.0.0-rc18 as follows
>>>>
>>>> What OS/distribution are you using?  Perhaps the problem could be
>>>> that you have python 2.6?  I have 2.7.
>>>>
>>>> Maybe you should try something like
>>>>
>>>> pkg-config --exists --print-errors python-2.6
>>>>
>>>> julia
>>>> ________________________________
>>>>
>>>> Dialog Semiconductor GmbH
>>>> Neue Str. 95
>>>> D-73230 Kirchheim
>>>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>>>> of the Supervisory Board: Gregorio Reyes Commercial register:
>>>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668
>>>>
>>>> Legal Disclaimer: This e-mail communication (and any attachment/s)
>>>> is confidential and contains proprietary information, some or all of
>>>> which may be legally privileged. It is intended solely for the use
>>>> of the individual or entity to which it is addressed. Access to this
>>>> email by anyone else is unauthorized. If you are not the intended
>>>> recipient, any disclosure, copying, distribution or any action taken
>>>> or omitted to be taken in reliance on it, is prohibited and may be
>>>> unlawful.
>>>>
>>>> Please consider the environment before printing this e-mail
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>   ________________________________
>>>
>>> Dialog Semiconductor GmbH
>>> Neue Str. 95
>>> D-73230 Kirchheim
>>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>>> of the Supervisory Board: Gregorio Reyes Commercial register:
>>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668 Legal
>>> Disclaimer: This e-mail communication (and any attachment/s) is
>>> confidential and contains proprietary information, some or all of
>>> which may be legally privileged. It is intended solely for the use of
>>> the individual or entity to which it is addressed. Access to this
>>> email by anyone else is unauthorized. If you are not the intended
>>> recipient, any disclosure, copying, distribution or any action taken
>>> or omitted to be taken in reliance on it, is prohibited and may be
>>> unlawful.
>>>
>>> Please consider the environment before printing this e-mail
>>>
>>>
>>> _______________________________________________
>>> Cocci mailing list
>>> Cocci at systeme.lip6.fr
>>> https://systeme.lip6.fr/mailman/listinfo/cocci
>>>
>>
>>
>>
>> --
>> Peter
>>
>>
>>
>>   ________________________________
>>
>> Dialog Semiconductor GmbH
>> Neue Str. 95
>> D-73230 Kirchheim
>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>> of the Supervisory Board: Gregorio Reyes Commercial register:
>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668 Legal
>> Disclaimer: This e-mail communication (and any attachment/s) is
>> confidential and contains proprietary information, some or all of
>> which may be legally privileged. It is intended solely for the use of
>> the individual or entity to which it is addressed. Access to this
>> email by anyone else is unauthorized. If you are not the intended
>> recipient, any disclosure, copying, distribution or any action taken
>> or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>>
>> Please consider the environment before printing this e-mail
>>
>
>
>
> --
> Peter
> ________________________________
>
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
> Chairman of the Supervisory Board: Gregorio Reyes
> Commercial register: Amtsgericht Stuttgart: HRB 231181
> UST-ID-Nr. DE 811121668
>
> Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>
> Please consider the environment before printing this e-mail
>
>



-- 
Peter

[Cocci] coccinelle-1.0.0-rc18

[Jamal Khashan]

Hi Peter,

It worked, ur the man, I sincerely appreciate your help

Thanks and best regards,

Jamal Khashan
Dialog Semiconductors IT Helpdesk
Direct Dial: +49 (0)7021 805 555
Jamal.Khashan at diasemi.com |  www.diasemi.com
Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany



-----Original Message-----
From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
Sent: Wednesday, September 04, 2013 1:19 PM
To: Jamal Khashan
Cc: Julia Lawall; cocci at systeme.lip6.fr
Subject: Re: [Cocci] coccinelle-1.0.0-rc18

Looks like that there is one error in the file, there is a missing new line before deb-src...
The content should be one entry / line, like:

deb http://archive.ubuntu.com/ubuntu lucid main universe deb-src http://archive.ubuntu.com/ubuntu lucid main universe

Can you please check that there is one entry / line?

On Wed, Sep 4, 2013 at 1:13 PM, Jamal Khashan <Jamal.Khashan@diasemi.com> wrote:
> Hi Peter,
>
> Thanks again,  here's the output
>
> root:/etc/apt# cat sources.list
> deb http://archive.ubuntu.com/ubuntu lucid main universe deb-src
> http://archive.ubuntu.com/ubuntu lucid main universe root:/etc/apt#
>
> apt-get build-dep coccinelle
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/
> lucid/main Packages
> (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_main_binary-
> amd64_Packages)
> W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/
> lucid/universe Packages
> (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_universe_bin
> ary-amd64_Packages)
> W: Duplicate sources.list entry
> http://linux.dell.com/repo/community/deb/latest/  Packages
> (/var/lib/apt/lists/linux.dell.com_repo_community_deb_latest_Packages)
> W: You may want to run apt-get update to correct these problems
> E: You must put some 'source' URIs in your sources.list
> root at swsrvapps-01:/etc/apt# apt-get update
> Get:1 file:  Release.gpg [198B]
> Get:2 file:  Release [337B]
> Ign file:  Packages
> Ign file:  Packages
> Ign http://ppa.launchpad.net lucid Release.gpg Ign
> http://ppa.launchpad.net lucid Release.gpg Ign
> http://ppa.launchpad.net lucid Release.gpg Hit
> http://archive.ubuntu.com lucid Release.gpg
> Get:3 http://ppa.launchpad.net lucid Release.gpg [316B] Ign
> http://ppa.launchpad.net lucid Release.gpg
> Get:4 http://ppa.launchpad.net lucid Release.gpg [316B]
> Get:5 http://ppa.launchpad.net lucid Release.gpg [316B]
> Get:6 http://ppa.launchpad.net lucid Release.gpg [316B] Ign
> http://ppa.launchpad.net lucid Release.gpg Ign
> http://ppa.launchpad.net lucid Release.gpg Ign
> http://ppa.launchpad.net lucid Release Hit http://archive.ubuntu.com
> lucid Release Ign http://ppa.launchpad.net lucid Release Ign
> http://ppa.launchpad.net lucid Release
> Get:7 http://ppa.launchpad.net lucid Release [13.9kB] Ign
> http://ppa.launchpad.net lucid Release Ign http://ppa.launchpad.net
> lucid Release
> Get:8 http://ppa.launchpad.net lucid Release [14.0kB]
> Get:9 http://ppa.launchpad.net lucid Release [13.9kB]
> Get:10 http://ppa.launchpad.net lucid Release [13.9kB] Ign
> http://ppa.launchpad.net lucid Release Ign http://ppa.launchpad.net
> lucid Release Ign http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid Release Hit http://archive.ubuntu.com
> lucid/main Packages Ign http://ppa.launchpad.net lucid/main Packages
> Ign http://ppa.launchpad.net lucid/main Packages Hit
> http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid Release Ign http://ppa.launchpad.net
> lucid Release Ign http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid/main Packages Hit
> http://archive.ubuntu.com lucid/universe Packages Ign
> http://ppa.launchpad.net lucid/main Packages Hit
> http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid/main Packages Hit
> http://ppa.launchpad.net lucid/main Packages Hit
> http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid/main Packages Ign
> http://ppa.launchpad.net lucid/main Packages Err
> http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Err http://ppa.launchpad.net lucid/main Packages
>   404  Not Found
> Hit http://www.scootersoftware.com stable Release.gpg
> Get:11 http://linux.dell.com  Release.gpg [827B] Hit
> http://www.scootersoftware.com stable Release
> Get:12 http://linux.dell.com  Release [1392B] Ign
> http://linux.dell.com  Release Ign http://www.scootersoftware.com
> stable/non-free Packages Hit http://linux.dell.com  Packages Ign
> http://www.scootersoftware.com stable/non-free Packages Hit
> http://www.scootersoftware.com stable/non-free Packages Fetched 2096B
> in 1s (1800B/s)
> W: GPG error: http://ppa.launchpad.net lucid Release: The following
> signatures couldn't be verified because the public key is not
> available: NO_PUBKEY 2A8E3034D018A4CE
> W: GPG error: http://ppa.launchpad.net lucid Release: The following
> signatures couldn't be verified because the public key is not
> available: NO_PUBKEY 83FBA1751378B444
> W: GPG error: http://ppa.launchpad.net lucid Release: The following
> signatures couldn't be verified because the public key is not
> available: NO_PUBKEY 83FBA1751378B444
> W: GPG error: http://ppa.launchpad.net lucid Release: The following
> signatures couldn't be verified because the public key is not
> available: NO_PUBKEY 1624804B84ACD041
> W: GPG error: http://linux.dell.com  Release: The following signatures
> couldn't be verified because the public key is not available:
> NO_PUBKEY 1285491434D8786F
> W: Failed to fetch
> http://archive.ubuntu.com/ubuntu/dists/lucid/Release  Unable to find
> expected entry  deb-src/binary-amd64/Packages in Meta-index file
> (malformed Release file?)
>
> W: Failed to fetch
> http://ppa.launchpad.net/Coccinelle/ppa/ubuntu/dists/lucid/main/binary
> -amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch
> http://ppa.launchpad.net/coccicheck/ppa/ubuntu/dists/lucid/main/binary
> -amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch
> http://ppa.launchpad.net/cubs/ppa/ubuntu/dists/lucid/main/binary-amd64
> /Packages.gz  404  Not Found
>
> W: Failed to fetch
> http://ppa.launchpad.net/libpycaml-ocaml-dev/ppa/ubuntu/dists/lucid/ma
> in/binary-amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch
> http://ppa.launchpad.net/ocaml-findlib/ppa/ubuntu/dists/lucid/main/bin
> ary-amd64/Packages.gz  404  Not Found
>
> W: Failed to fetch
> http://ppa.launchpad.net/spatch/ppa/ubuntu/dists/lucid/main/binary-amd
> 64/Packages.gz  404  Not Found
>
> E: Some index files failed to download, they have been ignored, or old ones used instead.
> root@:/etc/apt#
>
> Thanks and best regards,
>
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>
>
>
> -----Original Message-----
> From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
> Sent: Wednesday, September 04, 2013 1:07 PM
> To: Jamal Khashan
> Cc: Julia Lawall; cocci at systeme.lip6.fr
> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>
> Hi Jamal,
>
> This can be fixed by running:
> $ sudo apt-get build-dep coccinelle
>
> In order to this command to work, you need to enable the official universe repository in the sources.list file. Both for packages and sources. Mine looks like:
>
> $ cat /etc/apt/sources.list
> deb http://archive.ubuntu.com/ubuntu lucid main universe deb-src
> http://archive.ubuntu.com/ubuntu lucid main universe
>
> If you do changes in /etc/apt/sources.list, run `apt-get update` after the changes.
>
> Please let me know if this helped you.
>
> On Wed, Sep 4, 2013 at 1:00 PM, Jamal Khashan <Jamal.Khashan@diasemi.com> wrote:
>> Hi Peter,
>>
>> /coccinelle-1.0.0-rc18# ./configure --enable-release
>> --without-pkg-config
>> configure: configuring coccinelle 1.0.0-rc17 in
>> /root/conf/coccinelle-1.0.0-rc18
>> checking for a BSD-compatible install... /usr/bin/install -c checking
>> whether build environment is sane... yes
>> /root/conf/coccinelle-1.0.0-rc18/setup/missing: Unknown '--is-lightweight'
>> option
>> Try '/root/conf/coccinelle-1.0.0-rc18/setup/missing --help' for more
>> information
>> configure: WARNING: 'missing' script is too old or missing checking
>> for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk
>> checking whether make sets $(MAKE)... yes checking whether make
>> supports nested variables... yes
>> configure: determining version suffix checking for date... /bin/date
>> configure: version suffix set to Wed, 04 Sep 2013 11:55:21 +0100
>> configure: this configure program uses pkg-config m4 macros
>> configure: this configure program uses ocaml m4 macros (see
>> setup/ocaml.m4)
>> configure: this configure program uses custom m4 macros (see
>> setup/cocci.m4)
>> configure: some fake substitutions for required but unavailable
>> programs may be used (see setup/fake*)
>> configure: verifying basic tools
>> checking for style of include used by make... GNU checking for gcc...
>> gcc checking whether the C compiler works... yes checking for C
>> compiler default output file name... a.out checking for suffix of
>> executables...
>> checking whether we are cross compiling... no checking for suffix of
>> object files... o checking whether we are using the GNU C compiler...
>> yes checking whether gcc accepts -g... yes checking for gcc option to
>> accept ISO C89... none needed checking whether gcc understands -c and
>> -o together... yes checking dependency style of gcc... none checking
>> how to run the C preprocessor... gcc -E checking for bash...
>> /bin/bash checking for tar... /bin/tar checking for patch...
>> /usr/bin/patch checking for echo... /bin/echo checking for
>> patchelf... no
>> configure: pkg-config is disabled explicitly checking for ocamlc...
>> /usr/bin/ocamlc OCaml version is 3.11.2 OCaml library path is
>> /usr/lib/ocaml checking for ocamlopt... /usr/bin/ocamlopt checking
>> for ocamlc.opt... /usr/bin/ocamlc.opt checking for ocamlopt.opt...
>> /usr/bin/ocamlopt.opt checking for ocaml... /usr/bin/ocaml checking
>> for ocamldep... /usr/bin/ocamldep checking for ocamlmktop...
>> /usr/bin/ocamlmktop checking for ocamlmklib... /usr/bin/ocamlmklib
>> checking for ocamldoc... /usr/bin/ocamldoc checking for ocamlbuild...
>> /usr/bin/ocamlbuild checking that the OCaml version is at least
>> 3.10... yes checking that the OCaml version is at least 3.11... yes
>> checking for camlp4... /usr/bin/camlp4 checking for camlp4boot... no
>> checking for camlp4o... /usr/bin/camlp4o checking for camlp4of... no
>> checking for camlp4oof... no checking for camlp4orf... no checking
>> for camlp4prof... no checking for camlp4r... /usr/bin/camlp4r
>> checking for camlp4rf... no checking for ocamllex...
>> /usr/bin/ocamllex checking for ocamllex.opt... /usr/bin/ocamllex.opt checking for ocamlyacc...
>> /usr/bin/ocamlyacc checking for ocamlfind... /usr/bin/ocamlfind
>> checking for ocamlprof... /usr/bin/ocamlprof
>> configure: verifying basic ocaml modules
>> configure: coccinelle may use external ocaml libraries in
>> /root/conf/coccinelle-1.0.0-rc18/bundles
>> configure: the following OCaml packages should be provided by your
>> ocaml installation checking for OCaml findlib package unix... found
>> checking for OCaml findlib package bigarray... found checking for
>> OCaml findlib package num... found checking for OCaml findlib package
>> str... found
>> configure: configuring package dynlink checking for OCaml findlib
>> package dynlink... found
>> configure: configuring package camlp4 checking for OCaml findlib
>> package camlp4... found
>> configure: configuring package menhirLib checking for OCaml findlib
>> package menhirLib... found
>> configure: verifying optional features checking for menhir...
>> /usr/bin/menhir checking for python... /usr/bin/python checking
>> python version... 2.6 found
>> configure: python major version: 2
>> configure: looking for the corresponding python library checking for
>> PYTHON... no
>> configure: trying the default python library as fallback checking for
>> PYTHON... no checking for PCRE... yes
>> configure: configuring package pcre
>> checking for OCaml findlib package pcre... not found
>> configure: OCaml package pcre is not available checking for a bundled
>> substitute of pcre... yes
>> configure: using bundled substitute for pcre in
>> /root/conf/coccinelle-1.0.0-rc18/bundles/pcre/
>> configure: support for pcre syntax is enabled checking for pdflatex...
>> no
>> configure: pdflatex not found. Trying substitute
>> /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex.
>> checking for pdflatex...
>> /root/conf/coccinelle-1.0.0-rc18/setup/fake-pdflatex.sh pdflatex
>> configure: the optimized version of coccinelle will not be build by
>> default due to OCaml version 3.11.2 checking that generated files are
>> newer than configure... done
>> configure: creating ./config.status
>> config.status: creating Makefile.config
>> config.status: creating version.ml
>> config.status: creating commons/commands.ml
>> config.status: creating globals/config.ml
>> config.status: creating globals/regexp.ml
>> config.status: creating python/pycocci.ml
>> config.status: creating ocaml/prepare_ocamlcocci.ml
>> config.status: creating scripts/spatch.sh
>> config.status: creating docs/spatch.1
>> config.status: creating myocamlbuild.ml
>> config.status: creating setup/Makefile
>> config.status: executing depfiles commands
>> configure: configuration completed
>> ---------------------------------------------------------------------
>> -
>> --------
>> Summary
>>
>> configure flags:  --enable-release --without-pkg-config
>> findlib:          /usr/bin/ocamlfind    (an actual version is strongly
>> recommended)
>> menhir:           /usr/bin/menhir       (should be an optional tool)
>> menhirLib module: yes   (for local package use --disable-menhirLib)
>>
>> ocaml scripting:  yes   (overridable with --enable-ocaml)
>> python scripting: no    (overridable with --enable-python)
>> pycaml module:          (for local package use --disable-pycaml)
>>
>> pcre regexes:     local (overridable with --enable-pcre-syntax)
>> pcre module:      local (for local package use --disable-pcre)
>> pcre library:     yes   (requires the dev version of libpcre)
>>
>> release config:   yes   (strongly recommended to be 'yes', overridable with
>> --enable-release)
>> optimized spatch: no    (overridable with --disable-opt)
>>
>> ---------------------------------------------------------------------
>> -
>> -------- Coccinelle can now be compiled and installed.
>>
>>
>> If you compile coccinelle again after source code changes or
>> configuration changes, you may need to run first:
>>   $ make clean
>>
>> To compile coccinelle, run:
>>   $ make all
>>
>> To install coccinelle, run:
>>   $ make install
>>
>> Then, to test coccinelle, run for example:
>>   $ spatch -sp_file demos/simple.cocci demos/simple.c -o
>> /tmp/new_simple.c
>>
>> Or when coccinelle is not installed yet:
>>   $ COCCINELLE_HOME=/root/conf/coccinelle-1.0.0-rc18 ./scripts/spatch
>> -sp_file demos/simple.cocci demos/simple.c -o /tmp/new_simple.c
>> ---------------------------------------------------------------------
>> -
>> --------
>> #
>>
>>
>> Thanks and best regards,
>>
>> Jamal Khashan
>> Dialog Semiconductors IT Helpdesk
>> Direct Dial: +49 (0)7021 805 555
>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>
>>
>> -----Original Message-----
>> From: Peter Senna Tschudin [mailto:peter.senna at gmail.com]
>> Sent: Tuesday, September 03, 2013 4:45 PM
>> To: Jamal Khashan
>> Cc: Julia Lawall; cocci at systeme.lip6.fr
>> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>>
>> Hi Jamal,
>>
>> Can you try to configure with:
>>
>> $ ./configure --enable-release --without-pkg-config
>>
>> Thanks,
>>
>> Peter
>> ...
>>
>> On Tue, Sep 3, 2013 at 8:24 AM, Jamal Khashan
>> <Jamal.Khashan@diasemi.com>
>> wrote:
>>> Hi Julia,
>>>
>>> Thanks for your feedback.
>>>
>>> I think this version is a bit old?  Do you have the possibility to
>>> upgrade?
>>> Unfortunately I neither can upgrade Ubuntu nor python per feedback
>>> from my clients as follows " Hi Jamal, I've spoken with several
>>> other engineers and it would be a big risk to update python. We are
>>> using Gitorious (python) which manages all our software version
>>> control, also other people in different teams use python for their
>>> development and I do not know how this would affect those people.
>>> I think that his update would be too risky for us at the moment.
>>> Regards,
>>> Stephen
>>> "
>>>
>>> Can I supply any info, logs, configuration files etc that might
>>> assist in resolving this issue without OS or application upgrade?
>>>
>>>
>>> Thanks and best regards,
>>>
>>> Jamal Khashan
>>> Dialog Semiconductors IT Helpdesk
>>> Direct Dial: +49 (0)7021 805 555
>>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>>
>>>
>>> -----Original Message-----
>>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>>> Sent: Monday, September 02, 2013 3:22 PM
>>> To: Jamal Khashan
>>> Cc: 'cocci at systeme.lip6.fr'
>>> Subject: RE: [Cocci] coccinelle-1.0.0-rc18
>>>
>>> On Mon, 2 Sep 2013, Jamal Khashan wrote:
>>>
>>>> Hi Julia,
>>>>
>>>> Thanks for feedback, sorry for the late reply, I was on Vacation
>>>> for a week, but here's the output requested
>>>>
>>>> # lsb_release -a
>>>> No LSB modules are available.
>>>> Distributor ID: Ubuntu
>>>> Description:    Ubuntu 10.04.4 LTS
>>>> Release:        10.04
>>>> Codename:       lucid
>>>> #
>>>
>>> I think this version is a bit old?  Do you have the possibility to
>>> upgrade.
>>> On the other hand, it is the same version that I have at home, so I
>>> can try to reproduce the problem.
>>>
>>>> # pkg-config --exists --print-errors python-2.6 Package python-2.6
>>>> was not found in the pkg-config search path.
>>>> Perhaps you should add the directory containing `python-2.6.pc'
>>>> to the PKG_CONFIG_PATH environment variable No package 'python-2.6'
>>>> found #
>>>
>>> Do you just need to install python 2.6?  Did you install it
>>> separately from ubuntu?
>>>
>>> I don't know much about pkg-config.  Maybe someone else knows why
>>> you might have some software installed but pkg-config can't find it.
>>>
>>> julia
>>>
>>>> Thanks and best regards,
>>>>
>>>> Jamal Khashan
>>>> Dialog Semiconductors IT Helpdesk
>>>> Direct Dial: +49 (0)7021 805 555
>>>> Jamal.Khashan at diasemi.com |  www.diasemi.com Dialog Semiconductor
>>>> GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
>>>> Sent: Saturday, August 24, 2013 8:12 AM
>>>> To: Jamal Khashan
>>>> Cc: 'cocci at systeme.lip6.fr'
>>>> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
>>>>
>>>> > I am having difficulties enabling python scripting with
>>>> > coccinelle-1.0.0-rc18 as follows
>>>>
>>>> What OS/distribution are you using?  Perhaps the problem could be
>>>> that you have python 2.6?  I have 2.7.
>>>>
>>>> Maybe you should try something like
>>>>
>>>> pkg-config --exists --print-errors python-2.6
>>>>
>>>> julia
>>>> ________________________________
>>>>
>>>> Dialog Semiconductor GmbH
>>>> Neue Str. 95
>>>> D-73230 Kirchheim
>>>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
>>>> Chairman of the Supervisory Board: Gregorio Reyes Commercial register:
>>>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668
>>>>
>>>> Legal Disclaimer: This e-mail communication (and any attachment/s)
>>>> is confidential and contains proprietary information, some or all
>>>> of which may be legally privileged. It is intended solely for the
>>>> use of the individual or entity to which it is addressed. Access to
>>>> this email by anyone else is unauthorized. If you are not the
>>>> intended recipient, any disclosure, copying, distribution or any
>>>> action taken or omitted to be taken in reliance on it, is
>>>> prohibited and may be unlawful.
>>>>
>>>> Please consider the environment before printing this e-mail
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>   ________________________________
>>>
>>> Dialog Semiconductor GmbH
>>> Neue Str. 95
>>> D-73230 Kirchheim
>>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>>> of the Supervisory Board: Gregorio Reyes Commercial register:
>>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668 Legal
>>> Disclaimer: This e-mail communication (and any attachment/s) is
>>> confidential and contains proprietary information, some or all of
>>> which may be legally privileged. It is intended solely for the use
>>> of the individual or entity to which it is addressed. Access to this
>>> email by anyone else is unauthorized. If you are not the intended
>>> recipient, any disclosure, copying, distribution or any action taken
>>> or omitted to be taken in reliance on it, is prohibited and may be
>>> unlawful.
>>>
>>> Please consider the environment before printing this e-mail
>>>
>>>
>>> _______________________________________________
>>> Cocci mailing list
>>> Cocci at systeme.lip6.fr
>>> https://systeme.lip6.fr/mailman/listinfo/cocci
>>>
>>
>>
>>
>> --
>> Peter
>>
>>
>>
>>   ________________________________
>>
>> Dialog Semiconductor GmbH
>> Neue Str. 95
>> D-73230 Kirchheim
>> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
>> of the Supervisory Board: Gregorio Reyes Commercial register:
>> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668 Legal
>> Disclaimer: This e-mail communication (and any attachment/s) is
>> confidential and contains proprietary information, some or all of
>> which may be legally privileged. It is intended solely for the use of
>> the individual or entity to which it is addressed. Access to this
>> email by anyone else is unauthorized. If you are not the intended
>> recipient, any disclosure, copying, distribution or any action taken
>> or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>>
>> Please consider the environment before printing this e-mail
>>
>
>
>
> --
> Peter
> ________________________________
>
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard Chairman
> of the Supervisory Board: Gregorio Reyes Commercial register:
> Amtsgericht Stuttgart: HRB 231181 UST-ID-Nr. DE 811121668
>
> Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.
>
> Please consider the environment before printing this e-mail
>
>



--
Peter
________________________________

Dialog Semiconductor GmbH
Neue Str. 95
D-73230 Kirchheim
Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
Chairman of the Supervisory Board: Gregorio Reyes
Commercial register: Amtsgericht Stuttgart: HRB 231181
UST-ID-Nr. DE 811121668

Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.

Please consider the environment before printing this e-mail

[Cocci] coccinelle-1.0.0-rc18

[Julia Lawall]

On Mon, 2 Sep 2013, Jamal Khashan wrote:

> Hi Julia,
> 
> Thanks for feedback, sorry for the late reply, I was on Vacation for a week, but here's the output requested
> 
> # lsb_release -a
> No LSB modules are available.
> Distributor ID: Ubuntu
> Description:    Ubuntu 10.04.4 LTS
> Release:        10.04
> Codename:       lucid
> #

Actually, I have 11.04, and Python 2.7...

julia

> 
> 
> # pkg-config --exists --print-errors python-2.6
> Package python-2.6 was not found in the pkg-config search path.
> Perhaps you should add the directory containing `python-2.6.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'python-2.6' found
> #
> 
> Thanks and best regards,
> 
> Jamal Khashan
> Dialog Semiconductors IT Helpdesk
> Direct Dial: +49 (0)7021 805 555
> Jamal.Khashan at diasemi.com |  www.diasemi.com
> Dialog Semiconductor GmbH, Neue Strasse 95, 73230 Kirchheim /Teck, Germany
> 
> 
> -----Original Message-----
> From: Julia Lawall [mailto:julia.lawall at lip6.fr]
> Sent: Saturday, August 24, 2013 8:12 AM
> To: Jamal Khashan
> Cc: 'cocci at systeme.lip6.fr'
> Subject: Re: [Cocci] coccinelle-1.0.0-rc18
> 
> > I am having difficulties enabling python scripting with
> > coccinelle-1.0.0-rc18 as follows
> 
> What OS/distribution are you using?  Perhaps the problem could be that you have python 2.6?  I have 2.7.
> 
> Maybe you should try something like
> 
> pkg-config --exists --print-errors python-2.6
> 
> julia
> ________________________________
> 
> Dialog Semiconductor GmbH
> Neue Str. 95
> D-73230 Kirchheim
> Managing Directors: Dr. Jalal Bagherli, Jean-Michel Richard
> Chairman of the Supervisory Board: Gregorio Reyes
> Commercial register: Amtsgericht Stuttgart: HRB 231181
> UST-ID-Nr. DE 811121668
> 
> Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.
> 
> Please consider the environment before printing this e-mail
> 
> 
> 

[Cocci] coccinelle-1.0.0-rc18

[Julia Lawall]

Perhaps try the option --without-pkg-config, if pkg-config is not well set 
up on your machine.

julia

[Cocci] coccinelle-1.0.0-rc18

[Peter Senna Tschudin]

Some Linux distributions tools can help you with dependencies:

For Fedora:
$ sudo yum-builddep coccinelle

For Debian/Ubuntu:
$ sudo apt-get build-dep coccinelle

Those commands wil ltell you what are the recommended packages to have
installed in the system for building Coccinelle, and can save you some
time. Please let us know if you still have problems.

Peter

On Sat, Aug 24, 2013 at 9:30 AM, Julia Lawall <julia.lawall@lip6.fr> wrote:
> Perhaps try the option --without-pkg-config, if pkg-config is not well set
> up on your machine.
>
> julia
> _______________________________________________
> Cocci mailing list
> Cocci at systeme.lip6.fr
> https://systeme.lip6.fr/mailman/listinfo/cocci



-- 
Peter