All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrea Marson <andrea.marson@dave.eu>
To: "Jeff Lauruhn (jlauruhn)" <jlauruhn@micron.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
	"dedekind1@gmail.com" <dedekind1@gmail.com>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	Richard Weinberger <richard@nod.at>,
	Andrea Scian <rnd4@dave-tech.it>
Subject: Re: RFC: detect and manage power cut on MLC NAND
Date: Fri, 20 Mar 2015 09:07:41 +0100	[thread overview]
Message-ID: <550BD54D.9080604@dave.eu> (raw)
In-Reply-To: <0D23F1ECC880A74392D56535BCADD7354973EFED@NTXBOIMBX03.micron.com>

> 1) Technically speaking, it is possible to use an MLC memory in SLC mode, even if this is not recommended because MLC is not designed for this usage.
> 	There are devices that support SLC Mode.
Can you please indicate Micron part numbers supporting SLC mode? It 
would be really interesting to test these devices on our platforms.

Thank you,
Andrea

  reply	other threads:[~2015-03-20  8:07 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-10 11:57 RFC: detect and manage power cut on MLC NAND Andrea Scian
2015-03-10 12:51 ` Richard Weinberger
2015-03-11  7:20   ` Artem Bityutskiy
2015-03-11  8:57     ` Richard Weinberger
2015-03-11  9:05       ` Artem Bityutskiy
2015-03-11  9:09         ` Richard Weinberger
2015-03-11 17:01           ` Andrea Scian
2015-03-11 17:23             ` Jeff Lauruhn (jlauruhn)
2015-03-11 17:29               ` Richard Weinberger
2015-03-11 21:16                 ` Jeff Lauruhn (jlauruhn)
2015-03-12 10:28                   ` Richard Weinberger
2015-03-12 22:57                     ` Jeff Lauruhn (jlauruhn)
2015-03-13 20:31                       ` Boris Brezillon
2015-03-13 23:51                         ` Jeff Lauruhn (jlauruhn)
2015-03-14  9:46                           ` Andrea Marson - DAVE Embedded Systems
2015-03-16 16:02                             ` Jeff Lauruhn (jlauruhn)
2015-03-17  8:00                               ` Andrea Scian
2015-03-14 10:32                           ` Boris Brezillon
2015-03-16 21:11                             ` Jeff Lauruhn (jlauruhn)
2015-03-17  9:30                               ` Andrea Scian
2015-03-17 10:02                                 ` Boris Brezillon
2015-03-17 16:42                                   ` Jeff Lauruhn (jlauruhn)
2015-03-18  8:45                                     ` RFC: detect and manage power cut on MLC NAND (linux-mtd Digest, Vol 144, Issue 70) Andrea Marson
2015-03-18  9:07                                       ` Boris Brezillon
2015-03-18  9:56                                         ` Andrea Marson
2015-03-18 10:03                                           ` Boris Brezillon
2015-03-18 12:07                                         ` Richard Weinberger
2015-03-18 17:11                                           ` Jeff Lauruhn (jlauruhn)
2015-03-18 16:12                                       ` Jeff Lauruhn (jlauruhn)
2015-03-19  8:47                                         ` RFC: detect and manage power cut on MLC NAND Andrea Marson
2015-03-19  9:12                                           ` Boris Brezillon
2015-03-19 17:45                                             ` Jeff Lauruhn (jlauruhn)
2015-03-20  0:25                                             ` Iwo Mergler
2015-03-20  3:38                                               ` nick
2015-03-20  5:40                                                 ` Iwo Mergler
2015-03-20  8:26                                               ` Boris Brezillon
2015-03-20 17:15                                                 ` Nick Krause
2015-03-22 23:45                                                 ` Iwo Mergler
2015-03-23  2:18                                                 ` Iwo Mergler
2015-03-23  7:06                                                   ` Artem Bityutskiy
2015-03-23 19:05                                                     ` Boris Brezillon
2015-03-24  7:05                                                       ` Artem Bityutskiy
2015-03-19 18:00                                           ` Jeff Lauruhn (jlauruhn)
2015-03-20  8:07                                             ` Andrea Marson [this message]
2015-03-17 17:04                                 ` Jeff Lauruhn (jlauruhn)
2015-03-16  9:01                         ` Ricard Wanderlof
2015-03-16 17:27                           ` Jeff Lauruhn (jlauruhn)
2015-03-14 10:03                       ` Richard Weinberger
2015-03-12  9:32               ` Ricard Wanderlof
2015-03-23  4:08           ` Iwo Mergler
2015-03-23 21:15             ` Jeff Lauruhn (jlauruhn)
2015-03-24  1:17               ` Iwo Mergler
2015-03-24 16:50                 ` Jeff Lauruhn (jlauruhn)
2015-03-25  3:38                   ` Iwo Mergler
2015-03-25  8:33                     ` Ricard Wanderlof
2015-03-26  1:57                       ` Jeff Lauruhn (jlauruhn)
2015-03-26  8:55                         ` Ricard Wanderlof
2015-03-11  7:21 ` Artem Bityutskiy
  -- strict thread matches above, loose matches on Subject: below --
2015-03-12 10:31 Andrea Marson - DAVE Embedded Systems
     [not found] <mailman.37176.1426610573.22890.linux-mtd@lists.infradead.org>

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=550BD54D.9080604@dave.eu \
    --to=andrea.marson@dave.eu \
    --cc=boris.brezillon@free-electrons.com \
    --cc=dedekind1@gmail.com \
    --cc=jlauruhn@micron.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=rnd4@dave-tech.it \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.