[lm-sensors] SB800 support

[lm-sensors] SB800 support

[Marcin Nowak]

Hi,

Here: http://www.lm-sensors.org/wiki/Devices you have information that as
for full SB800 support Eddi De Pieri is working on the solution - last
update of this I have found was nearly three years ago :) (
http://marc.info/?l=linux-i2c&m\x134626228005697&w=2) so maybe as the
anniversary is coming within three days you can post any update on this -
can you? I am greatly interested in solving this.

Regards,
Marcin
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] SB800 support

[Marcin Nowak]

Anyone have any knowledge about the real progress on this? Anyone knows the
real status?

2015-03-11 18:00 GMT+01:00 Marcin Nowak <galandilias@gmail.com>:

> Hi,
>
> Here: http://www.lm-sensors.org/wiki/Devices you have information that as
> for full SB800 support Eddi De Pieri is working on the solution - last
> update of this I have found was nearly three years ago :) (
> http://marc.info/?l=linux-i2c&m\x134626228005697&w=2) so maybe as the
> anniversary is coming within three days you can post any update on this -
> can you? I am greatly interested in solving this.
>
> Regards,
> Marcin
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] SB800 support

[Guenter Roeck]

On 03/20/2015 07:07 AM, Marcin Nowak wrote:
> Anyone have any knowledge about the real progress on this? Anyone knows the
> real status?
>

I don't think there has been any progress.

Guenter

> 2015-03-11 18:00 GMT+01:00 Marcin Nowak <galandilias@gmail.com>:
>
>> Hi,
>>
>> Here: http://www.lm-sensors.org/wiki/Devices you have information that as
>> for full SB800 support Eddi De Pieri is working on the solution - last
>> update of this I have found was nearly three years ago :) (
>> http://marc.info/?l=linux-i2c&m\x134626228005697&w=2) so maybe as the
>> anniversary is coming within three days you can post any update on this -
>> can you? I am greatly interested in solving this.
>>
>> Regards,
>> Marcin
>>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] SB800 support

[Marcin Nowak]

Is there a lot to do? Maybe someone can take the work of Eddi and finish it
- what you say? I am actually a programmer but not C :) so I am a bit lost
:) I could finish it but I would need a lot of guidance.

Marcin.

2015-03-21 2:38 GMT+01:00 Guenter Roeck <linux@roeck-us.net>:

> On 03/20/2015 07:07 AM, Marcin Nowak wrote:
>
>> Anyone have any knowledge about the real progress on this? Anyone knows
>> the
>> real status?
>>
>>
> I don't think there has been any progress.
>
> Guenter
>
>  2015-03-11 18:00 GMT+01:00 Marcin Nowak <galandilias@gmail.com>:
>>
>>  Hi,
>>>
>>> Here: http://www.lm-sensors.org/wiki/Devices you have information that
>>> as
>>> for full SB800 support Eddi De Pieri is working on the solution - last
>>> update of this I have found was nearly three years ago :) (
>>> http://marc.info/?l=linux-i2c&m\x134626228005697&w=2) so maybe as the
>>> anniversary is coming within three days you can post any update on this -
>>> can you? I am greatly interested in solving this.
>>>
>>> Regards,
>>> Marcin
>>>
>>>  _______________________________________________
>> lm-sensors mailing list
>> lm-sensors@lm-sensors.org
>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>
>>
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] SB800 support

[Marcin Nowak]

Anyone willing to help?

2015-03-21 8:24 GMT+01:00 Marcin Nowak <galandilias@gmail.com>:

> Is there a lot to do? Maybe someone can take the work of Eddi and finish
> it - what you say? I am actually a programmer but not C :) so I am a bit
> lost :) I could finish it but I would need a lot of guidance.
>
> Marcin.
>
> 2015-03-21 2:38 GMT+01:00 Guenter Roeck <linux@roeck-us.net>:
>
>> On 03/20/2015 07:07 AM, Marcin Nowak wrote:
>>
>>> Anyone have any knowledge about the real progress on this? Anyone knows
>>> the
>>> real status?
>>>
>>>
>> I don't think there has been any progress.
>>
>> Guenter
>>
>>  2015-03-11 18:00 GMT+01:00 Marcin Nowak <galandilias@gmail.com>:
>>>
>>>  Hi,
>>>>
>>>> Here: http://www.lm-sensors.org/wiki/Devices you have information that
>>>> as
>>>> for full SB800 support Eddi De Pieri is working on the solution - last
>>>> update of this I have found was nearly three years ago :) (
>>>> http://marc.info/?l=linux-i2c&m\x134626228005697&w=2) so maybe as the
>>>> anniversary is coming within three days you can post any update on this
>>>> -
>>>> can you? I am greatly interested in solving this.
>>>>
>>>> Regards,
>>>> Marcin
>>>>
>>>>  _______________________________________________
>>> lm-sensors mailing list
>>> lm-sensors@lm-sensors.org
>>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>>
>>>
>>
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] SB800 support

[Guenter Roeck]

On 04/01/2015 03:41 AM, Marcin Nowak wrote:
> Anyone willing to help?
>
Marcin,

problem is that enhancing a kernel driver like this isn't really
the best project to learn C programming. I would love to help you
along, but unfortunately my task list already stretches out to
sometime in the next century.

Note that top-posting is discouraged on this mailing list.

Thanks,
Guenter

> 2015-03-21 8:24 GMT+01:00 Marcin Nowak <galandilias@gmail.com <mailto:galandilias@gmail.com>>:
>
>     Is there a lot to do? Maybe someone can take the work of Eddi and finish it - what you say? I am actually a programmer but not C :) so I am a bit lost :) I could finish it but I would need a lot of guidance.
>
>     Marcin.
>


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] SB800 support

[Jean Delvare]

Marcin, if you are still interested, support for the multiplexed SMBus
ports on the SB800 has just been added to the upcoming kernel v4.5.
Credits to Christian Fetzer for the code and Wolfram Sang, Andy
Shevchenko and Mika Westerberg for the review.

I have put a standalone version of the i2c-piix4 driver at:
http://jdelvare.nerim.net/devel/lm-sensors/drivers/i2c-piix4/
if you want to test it without updating your kernel. Generic build
instructions are available at:
http://jdelvare.nerim.net/devel/lm-sensors/drivers/INSTALL

-- 
Jean Delvare
SUSE L3 Support

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] SB800 support

[Marcin Nowak]

Thank you guys, I am already testing the fix for a while (I had an
opportunity to compile it directly from Christian) - and I can also confirm
that it is stable. I have not tested one specific scenario requested by
Christian because of lack of the time - but I assume that after a code
review it should work smooth in all scenarios.

Marcin.

2016-01-21 10:55 GMT+01:00 Jean Delvare <jdelvare@suse.de>:

> Marcin, if you are still interested, support for the multiplexed SMBus
> ports on the SB800 has just been added to the upcoming kernel v4.5.
> Credits to Christian Fetzer for the code and Wolfram Sang, Andy
> Shevchenko and Mika Westerberg for the review.
>
> I have put a standalone version of the i2c-piix4 driver at:
> http://jdelvare.nerim.net/devel/lm-sensors/drivers/i2c-piix4/
> if you want to test it without updating your kernel. Generic build
> instructions are available at:
> http://jdelvare.nerim.net/devel/lm-sensors/drivers/INSTALL
>
> --
> Jean Delvare
> SUSE L3 Support
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] SB800 support

[Jean Delvare]
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Re: [lm-sensors] SB800 support

[Marcin Nowak]
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