From: Vlastimil Babka <vbabka@suse.cz>
To: Pavel Machek <pavel@ucw.cz>, Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "Samuel Thibault" <samuel.thibault@ens-lyon.org>,
"Pali Rohár" <pali.rohar@gmail.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
rpurdie@rpsys.net,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Kosina" <jkosina@suse.cz>
Subject: Re: [PATCH v2 1/3] Input: export LEDs as class devices in sysfs
Date: Wed, 22 Jul 2015 15:12:19 +0200 [thread overview]
Message-ID: <55AF96B3.8070507@suse.cz> (raw)
In-Reply-To: <20150721210850.GA13242@amd>
On 07/21/2015 11:08 PM, Pavel Machek wrote:
> On Tue 2015-07-21 10:01:33, Dmitry Torokhov wrote:
>> On Tue, Jul 21, 2015 at 01:14:39PM +0200, Vlastimil Babka wrote:
>>> On 06/09/2015 07:42 PM, Dmitry Torokhov wrote:
>>>> From: Samuel Thibault <samuel.thibault@ens-lyon.org>
>>>>
>>>> This change creates a new input handler called "leds" that exports LEDs on input
>>>> devices as standard LED class devices in sysfs and allows controlling their
>>>> ptate via sysfs or via any of the standard LED triggers. This allows to
>>>> re-purpose and reassign LDEs on the keyboards to represent states other
>>>> than the standard keyboard states (CapsLock, NumLock, etc).
>>>>
>>>> The old API of controlling input LEDs by writing into /dev/input/eventX
>>>> devices is still present and will take precedence over acessing via LEDs
>>>> subsystem (i.e. it may override state set by a trigger). If input device is
>>>> "grabbed" then requests coming through LED subsystem will be ignored.
>>>>
>>>> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
>>>> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>>>> ---
>>>
>>>> + led_no = 0;
>>>> + for_each_set_bit(led_code, dev->ledbit, LED_CNT) {
>>>> + struct input_led *led = &leds->leds[led_no];
>>>> +
>>>> + led->handle = &leds->handle;
>>>> + led->code = led_code;
>>>> +
>>>> + if (WARN_ON(!input_led_info[led_code].name))
>>>> + continue;
>>>> +
>>>
>>> Hi,
>>> I get several warnings on booting 4.2-rc2 here. Should I be worried?
>>>
>>> [ 2.782432] ------------[ cut here ]------------
>>> [ 2.782440] WARNING: CPU: 2 PID: 356 at ../drivers/input/input-leds.c:115 input_leds_connect+0x22b/0x260()
>>> [ 2.782441] Modules linked in: btrfs xor raid6_pq crc32c_intel radeon i2c_algo_bit sr_mod cdrom drm_kms_helper ttm e1000e drm xhci_pci ptp pps_core xhci_hcd sg
>>> [ 2.782453] CPU: 2 PID: 356 Comm: kworker/2:2 Not tainted 4.2.0-rc2-1.g288d56b-desktop #1
>>> [ 2.782454] Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A13 03/27/2013
>>> [ 2.782458] Workqueue: usb_hub_wq hub_event
>>> [ 2.782459] ffffffff81a917b7 ffff880213ecf298 ffffffff8169f19d 0000000000000007
>>> [ 2.782462] 0000000000000000 ffff880213ecf2d8 ffffffff810674f6 ffff880213ecf2f8
>>> [ 2.782463] ffff8802132fb000 0000000000000003 000000000000000b ffff8800369ff000
>>> [ 2.782465] Call Trace:
>>> [ 2.782470] [<ffffffff8169f19d>] dump_stack+0x4c/0x6e
>>> [ 2.782474] [<ffffffff810674f6>] warn_slowpath_common+0x86/0xc0
>>> [ 2.782476] [<ffffffff810675ea>] warn_slowpath_null+0x1a/0x20
>>> [ 2.782478] [<ffffffff8152ccdb>] input_leds_connect+0x22b/0x260
>>> [ 2.782480] [<ffffffff815281b2>] input_attach_handler+0x1a2/0x1f0
>>> [ 2.782483] [<ffffffff81528640>] input_register_device+0x440/0x4f0
>>> [ 2.782486] [<ffffffff8156e494>] hidinput_connect+0x334/0x5d0
>>> [ 2.782488] [<ffffffff815683d4>] hid_connect+0x324/0x400
>>
>> No, this is benign. I guess your keyboard has more LEDs than input
>> system has defined or several usages refer to the same LED.
It's a mouse actually:
[ 69.413682] usb 3-4: new low-speed USB device number 3 using xhci_hcd
[ 69.587651] usb 3-4: New USB device found, idVendor=046d, idProduct=c50e
[ 69.587656] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 69.587659] usb 3-4: Product: USB Receiver
[ 69.587661] usb 3-4: Manufacturer: Logitech
[ 69.587865] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 69.596494] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C50E.0003/input/input14
followed by 5 warnings as the one I posted (all look the same at first
glance) and then:
[ 69.648581] hid-generic 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
The mouse has 3 green leds and one red to indicate battery status, but I think
they operate autonomously.
> Can we get rid of WARN_ON, then? It is nasty to flood logs, and people
> are likely to flood our inboxes, soon. printk(KERN_ERR) should be
> adequate...
I agree warning like this is inappropriate. But unfortunately things get worse
when I try to unplug the receiver...
Jul 22 14:46:11 gusiac kernel: BUG: unable to handle kernel NULL pointer dereference at (null)
Jul 22 14:46:11 gusiac kernel: IP: [<ffffffff8147d807>] device_del+0x17/0x260
Jul 22 14:46:11 gusiac kernel: PGD 0
Jul 22 14:46:12 gusiac kernel: Oops: 0000 [#1] PREEMPT SMP
Jul 22 14:46:12 gusiac kernel: Modules linked in: bnep bluetooth rfkill fuse nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache iscsi_ibft iscsi_boo
Jul 22 14:46:12 gusiac kernel: drm xhci_hcd sg
Jul 22 14:46:12 gusiac kernel: CPU: 6 PID: 194 Comm: kworker/6:1 Tainted: G W 4.2.0-rc2-2.g7010139-desktop #1
Jul 22 14:46:12 gusiac kernel: Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A13 03/27/2013
Jul 22 14:46:12 gusiac kernel: Workqueue: usb_hub_wq hub_event
Jul 22 14:46:12 gusiac kernel: task: ffff880213d28100 ti: ffff880213c8c000 task.ti: ffff880213c8c000
Jul 22 14:46:12 gusiac kernel: RIP: 0010:[<ffffffff8147d807>] [<ffffffff8147d807>] device_del+0x17/0x260
Jul 22 14:46:12 gusiac kernel: RSP: 0018:ffff880213c8f828 EFLAGS: 00010286
Jul 22 14:46:12 gusiac kernel: RAX: 00000000ffffffea RBX: 0000000000000000 RCX: 0000000000000000
Jul 22 14:46:12 gusiac kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000
Jul 22 14:46:12 gusiac kernel: RBP: ffff880213c8f868 R08: 0000000000000000 R09: ffffffff8135b2b0
Jul 22 14:46:12 gusiac kernel: R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
Jul 22 14:46:12 gusiac kernel: R13: ffff880213622000 R14: ffff880213622000 R15: ffff880213d618d0
Jul 22 14:46:12 gusiac kernel: FS: 0000000000000000(0000) GS:ffff88021dd80000(0000) knlGS:0000000000000000
Jul 22 14:46:12 gusiac kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul 22 14:46:12 gusiac kernel: CR2: 0000000000000000 CR3: 0000000001c0c000 CR4: 00000000001407e0
Jul 22 14:46:12 gusiac kernel: Stack:
Jul 22 14:46:12 gusiac kernel: ffff88003697dc10 0000000000000292 ffff880213622540 ffff8802136225c8
Jul 22 14:46:12 gusiac kernel: 0000000000000000 ffff8802136225c8 ffff880213622000 ffff880213622000
Jul 22 14:46:12 gusiac kernel: ffff880213c8f888 ffffffff8147da72 ffff880213c8f888 ffff8802136224d0
Jul 22 14:46:12 gusiac kernel: Call Trace:
Jul 22 14:46:12 gusiac kernel: [<ffffffff8147da72>] device_unregister+0x22/0x70
Jul 22 14:46:12 gusiac kernel: [<ffffffff81560c61>] led_classdev_unregister+0x61/0xb0
Jul 22 14:46:12 gusiac kernel: [<ffffffff8152ca1a>] input_leds_disconnect+0x3a/0x70
Jul 22 14:46:12 gusiac kernel: [<ffffffff81529e2c>] __input_unregister_device+0xac/0x170
Jul 22 14:46:12 gusiac kernel: [<ffffffff81529faf>] input_unregister_device+0x4f/0x80
Jul 22 14:46:12 gusiac kernel: [<ffffffff8156b358>] hidinput_disconnect+0x98/0xd0
Jul 22 14:46:12 gusiac kernel: [<ffffffff81568526>] hid_disconnect+0x76/0x80
Jul 22 14:46:12 gusiac kernel: [<ffffffff815685ea>] hid_device_remove+0xba/0xd0
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481b11>] __device_release_driver+0xa1/0x150
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481be3>] device_release_driver+0x23/0x30
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481285>] bus_remove_device+0x105/0x180
Jul 22 14:46:12 gusiac kernel: [<ffffffff8147d929>] device_del+0x139/0x260
Jul 22 14:46:12 gusiac kernel: [<ffffffff81568687>] hid_destroy_device+0x27/0x60
Jul 22 14:46:12 gusiac kernel: [<ffffffff815766cd>] usbhid_disconnect+0x4d/0x80
Jul 22 14:46:12 gusiac kernel: [<ffffffff814fd8c3>] usb_unbind_interface+0x83/0x270
Jul 22 14:46:12 gusiac kernel: [<ffffffff8148c57b>] ? rpm_idle+0x5b/0x260
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481b11>] __device_release_driver+0xa1/0x150
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481be3>] device_release_driver+0x23/0x30
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481285>] bus_remove_device+0x105/0x180
Jul 22 14:46:12 gusiac kernel: [<ffffffff8147d929>] device_del+0x139/0x260
Jul 22 14:46:12 gusiac kernel: [<ffffffff814fb169>] usb_disable_device+0x89/0x270
Jul 22 14:46:12 gusiac kernel: [<ffffffff814f0d02>] usb_disconnect+0x92/0x2b0
Jul 22 14:46:12 gusiac kernel: [<ffffffff814f2993>] hub_port_connect+0x73/0x9c0
Jul 22 14:46:12 gusiac kernel: [<ffffffff814f39b1>] hub_event+0x6d1/0xb10
Jul 22 14:46:12 gusiac kernel: [<ffffffff8109dd5b>] ? dequeue_task_fair+0x36b/0x700
Jul 22 14:46:12 gusiac kernel: [<ffffffff8109d121>] ? put_prev_entity+0x31/0x420
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107f039>] process_one_work+0x159/0x470
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107f398>] worker_thread+0x48/0x4a0
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107f350>] ? process_one_work+0x470/0x470
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107f350>] ? process_one_work+0x470/0x470
Jul 22 14:46:12 gusiac kernel: [<ffffffff81085089>] kthread+0xc9/0xe0
Jul 22 14:46:12 gusiac kernel: [<ffffffff81084fc0>] ? kthread_worker_fn+0x170/0x170
Jul 22 14:46:12 gusiac kernel: [<ffffffff816a55df>] ret_from_fork+0x3f/0x70
Jul 22 14:46:12 gusiac kernel: [<ffffffff81084fc0>] ? kthread_worker_fn+0x170/0x170
Jul 22 14:46:12 gusiac kernel: Code: 48 89 d7 48 89 e5 e8 89 ff ff ff 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 89 fc 48 83 ec 20 <4c> 8b 2f 65 48 8b 04
Jul 22 14:46:12 gusiac kernel: RIP [<ffffffff8147d807>] device_del+0x17/0x260
Jul 22 14:46:12 gusiac kernel: RSP <ffff880213c8f828>
Jul 22 14:46:12 gusiac kernel: CR2: 0000000000000000
Jul 22 14:46:12 gusiac kernel: ---[ end trace 0f333fa3e11a3225 ]---
Jul 22 14:46:12 gusiac kernel: BUG: unable to handle kernel paging request at ffffffffffffffd8
Jul 22 14:46:12 gusiac kernel: IP: [<ffffffff810854f0>] kthread_data+0x10/0x20
Jul 22 14:46:12 gusiac kernel: PGD 1c0d067 PUD 1c0f067 PMD 0
Jul 22 14:46:12 gusiac kernel: Oops: 0000 [#2] PREEMPT SMP
Jul 22 14:46:12 gusiac kernel: Modules linked in: bnep bluetooth rfkill fuse nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache iscsi_ibft iscsi_boo
Jul 22 14:46:12 gusiac kernel: drm xhci_hcd sg
Jul 22 14:46:12 gusiac kernel: CPU: 6 PID: 194 Comm: kworker/6:1 Tainted: G D W 4.2.0-rc2-2.g7010139-desktop #1
Jul 22 14:46:12 gusiac kernel: Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A13 03/27/2013
Jul 22 14:46:12 gusiac kernel: task: ffff880213d28100 ti: ffff880213c8c000 task.ti: ffff880213c8c000
Jul 22 14:46:12 gusiac kernel: RIP: 0010:[<ffffffff810854f0>] [<ffffffff810854f0>] kthread_data+0x10/0x20
Jul 22 14:46:12 gusiac kernel: RSP: 0018:ffff880213c8f4c8 EFLAGS: 00010096
Jul 22 14:46:12 gusiac kernel: RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000005
Jul 22 14:46:12 gusiac kernel: RDX: 0000000000000005 RSI: 0000000000000006 RDI: ffff880213d28100
Jul 22 14:46:12 gusiac kernel: RBP: ffff880213c8f4c8 R08: 00000000ffffffff R09: 0000000000000000
Jul 22 14:46:12 gusiac kernel: R10: 0000000073f4002f R11: 000000000000002f R12: 0000000000015600
Jul 22 14:46:12 gusiac kernel: R13: ffff88021dd95600 R14: ffff880213d28100 R15: 0000000000000006
Jul 22 14:46:12 gusiac kernel: FS: 0000000000000000(0000) GS:ffff88021dd80000(0000) knlGS:0000000000000000
Jul 22 14:46:12 gusiac kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul 22 14:46:12 gusiac kernel: CR2: 0000000000000028 CR3: 0000000001c0c000 CR4: 00000000001407e0
Jul 22 14:46:12 gusiac kernel: Stack:
Jul 22 14:46:12 gusiac kernel: ffff880213c8f4e8 ffffffff8107fd55 ffff880213c8f4e8 ffff88021dd95600
Jul 22 14:46:12 gusiac kernel: ffff880213c8f538 ffffffff816a0bc7 ffff880200000000 ffff880213d28100
Jul 22 14:46:12 gusiac kernel: ffff880036d77cc0 ffff880213c90000 ffff880213d28d70 ffff880213c8f0c0
Jul 22 14:46:12 gusiac kernel: Call Trace:
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107fd55>] wq_worker_sleeping+0x15/0xa0
Jul 22 14:46:12 gusiac kernel: [<ffffffff816a0bc7>] __schedule+0x667/0x970
Jul 22 14:46:12 gusiac kernel: [<ffffffff816a0f0e>] schedule+0x3e/0x90
Jul 22 14:46:12 gusiac kernel: [<ffffffff8106a096>] do_exit+0x806/0xb00
Jul 22 14:46:12 gusiac kernel: [<ffffffff8100753e>] oops_end+0x9e/0xd0
Jul 22 14:46:12 gusiac kernel: [<ffffffff810532eb>] no_context+0x10b/0x360
Jul 22 14:46:12 gusiac kernel: [<ffffffff810535c0>] __bad_area_nosemaphore+0x80/0x1f0
Jul 22 14:46:12 gusiac kernel: [<ffffffff81053743>] bad_area_nosemaphore+0x13/0x20
Jul 22 14:46:12 gusiac kernel: [<ffffffff81053a29>] __do_page_fault+0xb9/0x410
Jul 22 14:46:12 gusiac kernel: [<ffffffff815d8186>] ? netlink_broadcast_filtered+0x136/0x3b0
Jul 22 14:46:12 gusiac kernel: [<ffffffff81053da2>] do_page_fault+0x22/0x30
Jul 22 14:46:12 gusiac kernel: [<ffffffff816a6f88>] page_fault+0x28/0x30
Jul 22 14:46:12 gusiac kernel: [<ffffffff8135b2b0>] ? cleanup_uevent_env+0x10/0x10
Jul 22 14:46:12 gusiac kernel: [<ffffffff8147d807>] ? device_del+0x17/0x260
Jul 22 14:46:12 gusiac kernel: [<ffffffff810d0f3f>] ? try_to_del_timer_sync+0x4f/0x70
Jul 22 14:46:12 gusiac kernel: [<ffffffff8147da72>] device_unregister+0x22/0x70
Jul 22 14:46:12 gusiac kernel: [<ffffffff81560c61>] led_classdev_unregister+0x61/0xb0
Jul 22 14:46:12 gusiac kernel: [<ffffffff8152ca1a>] input_leds_disconnect+0x3a/0x70
Jul 22 14:46:12 gusiac kernel: [<ffffffff81529e2c>] __input_unregister_device+0xac/0x170
Jul 22 14:46:12 gusiac kernel: [<ffffffff81529faf>] input_unregister_device+0x4f/0x80
Jul 22 14:46:12 gusiac kernel: [<ffffffff8156b358>] hidinput_disconnect+0x98/0xd0
Jul 22 14:46:12 gusiac kernel: [<ffffffff81568526>] hid_disconnect+0x76/0x80
Jul 22 14:46:12 gusiac kernel: [<ffffffff815685ea>] hid_device_remove+0xba/0xd0
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481b11>] __device_release_driver+0xa1/0x150
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481be3>] device_release_driver+0x23/0x30
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481285>] bus_remove_device+0x105/0x180
Jul 22 14:46:12 gusiac kernel: [<ffffffff8147d929>] device_del+0x139/0x260
Jul 22 14:46:12 gusiac kernel: [<ffffffff81568687>] hid_destroy_device+0x27/0x60
Jul 22 14:46:12 gusiac kernel: [<ffffffff815766cd>] usbhid_disconnect+0x4d/0x80
Jul 22 14:46:12 gusiac kernel: [<ffffffff814fd8c3>] usb_unbind_interface+0x83/0x270
Jul 22 14:46:12 gusiac kernel: [<ffffffff8148c57b>] ? rpm_idle+0x5b/0x260
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481b11>] __device_release_driver+0xa1/0x150
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481be3>] device_release_driver+0x23/0x30
Jul 22 14:46:12 gusiac kernel: [<ffffffff81481285>] bus_remove_device+0x105/0x180
Jul 22 14:46:12 gusiac kernel: [<ffffffff8147d929>] device_del+0x139/0x260
Jul 22 14:46:12 gusiac kernel: [<ffffffff814fb169>] usb_disable_device+0x89/0x270
Jul 22 14:46:12 gusiac kernel: [<ffffffff814f0d02>] usb_disconnect+0x92/0x2b0
Jul 22 14:46:12 gusiac kernel: [<ffffffff814f2993>] hub_port_connect+0x73/0x9c0
Jul 22 14:46:12 gusiac kernel: [<ffffffff814f39b1>] hub_event+0x6d1/0xb10
Jul 22 14:46:12 gusiac kernel: [<ffffffff8109dd5b>] ? dequeue_task_fair+0x36b/0x700
Jul 22 14:46:12 gusiac kernel: [<ffffffff8109d121>] ? put_prev_entity+0x31/0x420
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107f039>] process_one_work+0x159/0x470
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107f398>] worker_thread+0x48/0x4a0
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107f350>] ? process_one_work+0x470/0x470
Jul 22 14:46:12 gusiac kernel: [<ffffffff8107f350>] ? process_one_work+0x470/0x470
Jul 22 14:46:12 gusiac kernel: [<ffffffff81085089>] kthread+0xc9/0xe0
Jul 22 14:46:12 gusiac kernel: [<ffffffff81084fc0>] ? kthread_worker_fn+0x170/0x170
Jul 22 14:46:12 gusiac kernel: [<ffffffff816a55df>] ret_from_fork+0x3f/0x70
Jul 22 14:46:12 gusiac kernel: [<ffffffff81084fc0>] ? kthread_worker_fn+0x170/0x170
Jul 22 14:46:12 gusiac kernel: Code: 00 48 89 e5 5d 48 8b 40 c8 48 c1 e8 02 83 e0 01 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 87 60 05 00 00 55 48 89 e5 <48> 8b 40 d8 5d c3 66
Jul 22 14:46:12 gusiac kernel: RIP [<ffffffff810854f0>] kthread_data+0x10/0x20
Jul 22 14:46:12 gusiac kernel: RSP <ffff880213c8f4c8>
Jul 22 14:46:12 gusiac kernel: CR2: ffffffffffffffd8
Jul 22 14:46:12 gusiac kernel: ---[ end trace 0f333fa3e11a3226 ]---
Jul 22 14:46:12 gusiac kernel: Fixing recursive fault but reboot is needed!
I think some more followed including rcu stall etc, but were not
logged permanently. I suspect the warnings and the bugs are
related :)
I'll now try collect the debug prints you suggested.
> Thanks,
> Pavel
>
next prev parent reply other threads:[~2015-07-22 13:12 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-08 21:43 [PATCH 0/3] Switch input leds over to standard LED class devices Dmitry Torokhov
2015-06-08 21:43 ` [PATCH 1/3] Input: export LEDs as class devices in sysfs Dmitry Torokhov
2015-06-09 13:19 ` Samuel Thibault
2015-06-09 13:19 ` Samuel Thibault
2015-06-09 13:27 ` Samuel Thibault
2015-06-09 13:27 ` Samuel Thibault
2015-06-09 16:50 ` Dmitry Torokhov
2015-06-09 16:50 ` Dmitry Torokhov
2015-06-09 17:16 ` Samuel Thibault
2015-06-09 17:16 ` Samuel Thibault
2015-06-09 16:49 ` Dmitry Torokhov
2015-06-09 16:49 ` Dmitry Torokhov
2015-06-09 17:22 ` Samuel Thibault
2015-06-09 17:22 ` Samuel Thibault
2015-06-09 17:32 ` Dmitry Torokhov
2015-06-09 17:32 ` Dmitry Torokhov
2015-06-10 6:34 ` Pavel Machek
2015-06-10 6:34 ` Pavel Machek
2015-06-09 17:42 ` [PATCH v2 " Dmitry Torokhov
2015-06-10 0:32 ` Samuel Thibault
2015-06-10 1:24 ` Dmitry Torokhov
2015-06-11 17:51 ` Pavel Machek
2015-06-15 10:03 ` Pavel Machek
2015-06-15 10:51 ` Pali Rohár
2015-07-21 11:14 ` Vlastimil Babka
2015-07-21 17:01 ` Dmitry Torokhov
2015-07-21 21:08 ` Pavel Machek
2015-07-22 13:12 ` Vlastimil Babka [this message]
2015-07-22 18:55 ` Jiri Kosina
2015-07-23 5:19 ` Vlastimil Babka
2015-07-23 5:42 ` Jiri Kosina
2015-07-22 14:41 ` Vlastimil Babka
2015-07-22 19:49 ` Jiri Kosina
2015-07-22 21:47 ` Pavel Machek
2015-07-22 21:50 ` Jiri Kosina
2015-07-22 21:49 ` Dmitry Torokhov
2015-07-22 22:01 ` Jiri Kosina
2015-06-08 21:43 ` [PATCH 2/3] tty/vt/keyboard: define LED triggers for VT LED states Dmitry Torokhov
2015-06-08 21:43 ` [PATCH 3/3] tty/vt/keyboard: define LED triggers for VT keyboard lock states Dmitry Torokhov
2015-06-08 22:58 ` [PATCH 0/3] Switch input leds over to standard LED class devices Bastien Nocera
2015-06-08 23:16 ` Dmitry Torokhov
2015-06-09 10:54 ` Pavel Machek
2015-06-09 11:12 ` Pavel Machek
2015-06-09 11:22 ` Pali Rohár
2015-06-09 11:22 ` Pali Rohár
2015-06-09 11:28 ` Pavel Machek
2015-06-09 11:28 ` Pavel Machek
2015-06-09 12:22 ` Samuel Thibault
2015-06-09 12:22 ` Samuel Thibault
2015-06-09 11:26 ` Pavel Machek
2015-06-09 16:40 ` Dmitry Torokhov
2015-06-09 12:20 ` Samuel Thibault
2015-06-09 12:20 ` Samuel Thibault
2015-06-09 16:18 ` Pavel Machek
2015-06-09 16:32 ` Dmitry Torokhov
2015-06-09 16:37 ` Dmitry Torokhov
2015-06-09 13:42 ` Samuel Thibault
2015-06-09 13:42 ` Samuel Thibault
2015-06-09 13:50 ` Pali Rohár
2015-06-09 13:50 ` Pali Rohár
2015-06-09 14:05 ` Samuel Thibault
[not found] ` <20090205113908.GA14224@const.inria.fr>
2015-06-09 14:17 ` caps lock led does not show up Samuel Thibault
2015-06-09 14:17 ` Samuel Thibault
2015-06-09 16:03 ` Bug#514464: " Anton Zinoviev
2015-06-09 16:03 ` Anton Zinoviev
2015-06-11 8:08 ` Samuel Thibault
2015-06-11 8:08 ` Samuel Thibault
2015-06-11 14:28 ` Samuel Thibault
2015-06-11 14:28 ` Samuel Thibault
2015-06-11 15:37 ` Samuel Thibault
2015-06-25 15:41 ` Samuel Thibault
2015-07-02 16:39 ` Anton Zinoviev
2015-07-02 16:50 ` Samuel Thibault
2015-08-31 8:33 ` Samuel Thibault
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55AF96B3.8070507@suse.cz \
--to=vbabka@suse.cz \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=rpurdie@rpsys.net \
--cc=samuel.thibault@ens-lyon.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.