* xeno-test failed due to cond_destroy error @ 2021-05-10 1:56 Fangsuo Wu 2021-05-10 6:49 ` Jan Kiszka 0 siblings, 1 reply; 10+ messages in thread From: Fangsuo Wu @ 2021-05-10 1:56 UTC (permalink / raw) To: xenomai Hi, I met below errors when running xeno-test in my board: *sh-4.4# ./xeno-testStarted child 209: /bin/sh /usr/xenomai/bin/xeno-test-run-wrapper ./xeno-test++ echo 0++ testdir=/usr/xenomai/bin++ /usr/xenomai/bin/smokey --run random_alloc_rounds=64 pattern_check_rounds=64arith OKbufp skipped (no kernel support)cpu_affinity skipped (no kernel support)fpu_stress OKiddp skipped (no kernel support)leaks OKmemory_coreheap OKmemory_heapmem OKmemory_tlsf OKnet_packet_dgram skipped (no kernel support)net_packet_raw skipped (no kernel support)net_udp skipped (no kernel support)posix_clock OKFAILED autoinit_simple_conddestroy cond_destroy: returned -22 instead of 0 - Invalid argumentchild 209 returned: exited with status 1* How can I solve the cond_destroy error and what kernel configurations do I need for "no kernel support" items? Can someone give some hints? Thanks! ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-10 1:56 xeno-test failed due to cond_destroy error Fangsuo Wu @ 2021-05-10 6:49 ` Jan Kiszka 2021-05-10 7:20 ` Fangsuo Wu 0 siblings, 1 reply; 10+ messages in thread From: Jan Kiszka @ 2021-05-10 6:49 UTC (permalink / raw) To: Fangsuo Wu, xenomai On 10.05.21 03:56, Fangsuo Wu via Xenomai wrote: > Hi, I met below errors when running xeno-test in my board: > > > > > > > > > > > > > > > > > > > > > *sh-4.4# ./xeno-testStarted child 209: /bin/sh > /usr/xenomai/bin/xeno-test-run-wrapper ./xeno-test++ echo 0++ > testdir=/usr/xenomai/bin++ /usr/xenomai/bin/smokey --run > random_alloc_rounds=64 pattern_check_rounds=64arith OKbufp skipped (no > kernel support)cpu_affinity skipped (no kernel support)fpu_stress OKiddp > skipped (no kernel support)leaks OKmemory_coreheap OKmemory_heapmem > OKmemory_tlsf OKnet_packet_dgram skipped (no kernel support)net_packet_raw > skipped (no kernel support)net_udp skipped (no kernel support)posix_clock > OKFAILED autoinit_simple_conddestroy cond_destroy: returned -22 instead of > 0 - Invalid argumentchild 209 returned: exited with status 1* > > How can I solve the cond_destroy error and what kernel configurations do I > need for "no kernel support" items? Can someone give some hints? Thanks! > Please use an email client that is capable of sending unmangled plaintext emails to prevent such things as above. Then we need more information about your board, the revision of Xenomai used, how you built etc. Jan -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-10 6:49 ` Jan Kiszka @ 2021-05-10 7:20 ` Fangsuo Wu 2021-05-10 7:35 ` Jan Kiszka 0 siblings, 1 reply; 10+ messages in thread From: Fangsuo Wu @ 2021-05-10 7:20 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai Jan, Thanks for your reply. The environment I used is listed below. BTW, I can run latency test successfully. 1. The revision of Xenomai: xenomai-3.1.tar.bz2 2. Soc: dual ARM cortex A7 3. How I built application libraries: ./configure CFLAGS="-march=armv7-a -mfpu=vfp3" LDFLAGS="-march=armv7-a -mfpu=vfp3" --build=i686-pc-linux-gnu --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp --enable-pshared make DESTDIR=/home/data/nfs_test/ install 4. The kernel I used is 4.19 so I applied ipipe-core-4.19.55-arm-5.patch, and manually enabled CONFIG_IPIPE_ARM_KUSER_TSC. The full config file is: # # Automatically generated file; DO NOT EDIT. # Linux/arm 4.19.63 Kernel Configuration # # # Compiler: arm-asr7200-linux-gnueabi-gcc (GCC) 8.2.0 # CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=80200 CONFIG_CLANG_VERSION=0 CONFIG_CC_HAS_ASM_GOTO=y CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_BUILD_SALT="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_CROSS_MEMORY_ATTACH=y # CONFIG_USELIB is not set # CONFIG_AUDIT is not set CONFIG_HAVE_ARCH_AUDITSYSCALL=y # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_SHOW_LEVEL=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y CONFIG_GENERIC_IRQ_MIGRATION=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y # CONFIG_GENERIC_IRQ_DEBUGFS is not set CONFIG_GENERIC_IRQ_MULTI_HANDLER=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_HAS_TICK_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set CONFIG_CPU_ISOLATION=y # # RCU Subsystem # CONFIG_PREEMPT_RCU=y # CONFIG_RCU_EXPERT is not set CONFIG_SRCU=y CONFIG_TREE_SRCU=y CONFIG_TASKS_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 CONFIG_GENERIC_SCHED_CLOCK=y # CONFIG_CGROUPS is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y # CONFIG_USER_NS is not set CONFIG_PID_NS=y CONFIG_NET_NS=y # CONFIG_CHECKPOINT_RESTORE is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set # CONFIG_RD_XZ is not set # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_BPF=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_MULTIUSER=y # CONFIG_SGETMASK_SYSCALL is not set CONFIG_SYSFS_SYSCALL=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y CONFIG_PRINTK_NMI=y CONFIG_RAW_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_FUTEX_PI=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_BASE_RELATIVE=y # CONFIG_BPF_SYSCALL is not set # CONFIG_USERFAULTFD is not set CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y CONFIG_RSEQ=y # CONFIG_DEBUG_RSEQ is not set # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # CONFIG_PC104 is not set # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLAB_MERGE_DEFAULT=y # CONFIG_SLAB_FREELIST_RANDOM is not set # CONFIG_SLAB_FREELIST_HARDENED is not set CONFIG_SLUB_CPU_PARTIAL=y CONFIG_SYSTEM_DATA_VERIFICATION=y # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y CONFIG_MIGHT_HAVE_PCI=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_HAVE_PROC_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_GENERIC_BUG=y CONFIG_PGTABLE_LEVELS=2 # # System Type # CONFIG_MMU=y CONFIG_ARCH_MMAP_RND_BITS_MIN=8 CONFIG_ARCH_MMAP_RND_BITS_MAX=16 CONFIG_ARCH_MULTIPLATFORM=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C24XX is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP1 is not set # # Multiple platform selection # # # CPU Core family selection # # CONFIG_ARCH_MULTI_V6 is not set CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_MULTI_V6_V7=y CONFIG_ARCH_ASR=y # CONFIG_ARCH_VIRT is not set # CONFIG_ARCH_ACTIONS is not set # CONFIG_ARCH_ALPINE is not set # CONFIG_ARCH_ARTPEC is not set # # Finch Implementations # CONFIG_MACH_FINCH=y CONFIG_ASR_CM=y # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCM is not set # CONFIG_ARCH_BERLIN is not set # CONFIG_ARCH_DIGICOLOR is not set # CONFIG_ARCH_EXYNOS is not set # CONFIG_ARCH_HIGHBANK is not set # CONFIG_ARCH_HISI is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_KEYSTONE is not set # CONFIG_ARCH_MEDIATEK is not set # CONFIG_ARCH_MESON is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_MVEBU is not set # CONFIG_ARCH_NPCM is not set # # TI OMAP/AM/DM/DRA Family # # CONFIG_ARCH_OMAP3 is not set # CONFIG_ARCH_OMAP4 is not set # CONFIG_SOC_OMAP5 is not set # CONFIG_SOC_AM33XX is not set # CONFIG_SOC_AM43XX is not set # CONFIG_SOC_DRA7XX is not set # CONFIG_ARCH_SIRF is not set # CONFIG_ARCH_QCOM is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_ROCKCHIP is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_RENESAS is not set # CONFIG_ARCH_SOCFPGA is not set # CONFIG_PLAT_SPEAR is not set # CONFIG_ARCH_STI is not set # CONFIG_ARCH_STM32 is not set # CONFIG_ARCH_SUNXI is not set # CONFIG_ARCH_TANGO is not set # CONFIG_ARCH_TEGRA is not set # CONFIG_ARCH_UNIPHIER is not set # CONFIG_ARCH_U8500 is not set # CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_WM8850 is not set # CONFIG_ARCH_ZX is not set # CONFIG_ARCH_ZYNQ is not set CONFIG_IPIPE_ARM_KUSER_TSC=y # # Processor Type # CONFIG_CPU_V7=y CONFIG_CPU_THUMB_CAPABLE=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y CONFIG_CPU_TLB_V7=y CONFIG_CPU_HAS_ASID=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y # # Processor Features # # CONFIG_ARM_LPAE is not set CONFIG_ARM_THUMB=y # CONFIG_ARM_THUMBEE is not set CONFIG_ARM_VIRT_EXT=y CONFIG_SWP_EMULATE=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_CPU_SPECTRE=y CONFIG_HARDEN_BRANCH_PREDICTOR=y CONFIG_NEED_KUSER_HELPERS=y CONFIG_KUSER_HELPERS=y CONFIG_VDSO=y CONFIG_MIGHT_HAVE_CACHE_L2X0=y # CONFIG_CACHE_L2X0 is not set CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_ARM_L1_CACHE_SHIFT=6 CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_DEBUG_ALIGN_RODATA=y # CONFIG_ARM_ERRATA_430973 is not set CONFIG_ARM_ERRATA_643719=y # CONFIG_ARM_ERRATA_720789 is not set # CONFIG_ARM_ERRATA_754322 is not set # CONFIG_ARM_ERRATA_754327 is not set # CONFIG_ARM_ERRATA_764369 is not set # CONFIG_ARM_ERRATA_775420 is not set # CONFIG_ARM_ERRATA_798181 is not set # CONFIG_ARM_ERRATA_773022 is not set # CONFIG_ARM_ERRATA_818325_852422 is not set # CONFIG_ARM_ERRATA_821420 is not set # CONFIG_ARM_ERRATA_825619 is not set # CONFIG_ARM_ERRATA_852421 is not set # CONFIG_ARM_ERRATA_852423 is not set # # Bus support # # CONFIG_PCI is not set # # PCI Endpoint # # CONFIG_PCI_ENDPOINT is not set # CONFIG_PCCARD is not set # # Kernel Features # CONFIG_HAVE_SMP=y CONFIG_SMP=y CONFIG_SMP_ON_UP=y CONFIG_ARM_CPU_TOPOLOGY=y # CONFIG_SCHED_MC is not set # CONFIG_SCHED_SMT is not set CONFIG_HAVE_ARM_ARCH_TIMER=y # CONFIG_MCPM is not set # CONFIG_BIG_LITTLE is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_3G_OPT is not set # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=2 CONFIG_HOTPLUG_CPU=y CONFIG_ARM_PSCI=y CONFIG_ARCH_NR_GPIO=0 CONFIG_HAVE_IPIPE_SUPPORT=y CONFIG_IPIPE=y CONFIG_IPIPE_CORE=y CONFIG_IPIPE_CORE_APIREV=2 CONFIG_IPIPE_WANT_APIREV_2=y CONFIG_IPIPE_TARGET_APIREV=2 CONFIG_IPIPE_HAVE_HOSTRT=y CONFIG_HZ_FIXED=0 CONFIG_HZ_100=y # CONFIG_HZ_200 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_500 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y # CONFIG_THUMB2_KERNEL is not set CONFIG_ARM_PATCH_IDIV=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_HAVE_ARCH_PFN_VALID=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_CPU_SW_DOMAIN_PAN=y CONFIG_HW_PERF_EVENTS=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ARM_MODULE_PLTS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_ALIGNMENT_TRAP=y # CONFIG_SECCOMP is not set # CONFIG_PARAVIRT is not set # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set # CONFIG_XEN is not set # # Boot options # CONFIG_USE_OF=y CONFIG_ATAGS=y # CONFIG_DEPRECATED_PARAM_STRUCT is not set CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 # CONFIG_ARM_APPENDED_DTB is not set CONFIG_CMDLINE="" CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y # CONFIG_CRASH_DUMP is not set CONFIG_AUTO_ZRELADDR=y # CONFIG_EFI is not set # # CPU Power Management # # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # CPU Idle # # CONFIG_CPU_IDLE is not set # # Floating point emulation # # # At least one emulation must be selected # CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y # # Power management options # CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_SUSPEND_SKIP_SYNC is not set # CONFIG_HIBERNATION is not set CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_APM_EMULATION is not set CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_PM_GENERIC_DOMAINS_SLEEP=y CONFIG_PM_GENERIC_DOMAINS_OF=y CONFIG_CPU_PM=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARM_CPU_SUSPEND=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y # # Firmware Drivers # CONFIG_ARM_PSCI_FW=y # CONFIG_FIRMWARE_MEMMAP is not set # CONFIG_FW_CFG_SYSFS is not set CONFIG_HAVE_ARM_SMCCC=y # CONFIG_GOOGLE_FIRMWARE is not set # # Tegra firmware driver # # CONFIG_ARM_CRYPTO is not set # CONFIG_VIRTUALIZATION is not set # # General architecture-dependent options # CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y # CONFIG_JUMP_LABEL is not set CONFIG_OPTPROBES=y CONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_NMI=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_IDLE_POLL_SETUP=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_CLK=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=8 CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y CONFIG_ARCH_HAS_PHYS_TO_DMA=y CONFIG_REFCOUNT_FULL=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y CONFIG_PLUGIN_HOSTCC="" CONFIG_HAVE_GCC_PLUGINS=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set # CONFIG_BLK_DEV_ZONED is not set CONFIG_BLK_CMDLINE_PARSER=y # CONFIG_BLK_WBT is not set CONFIG_BLK_DEBUG_FS=y # CONFIG_BLK_SED_OPAL is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_CMDLINE_PARTITION=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_MQ_IOSCHED_DEADLINE=y CONFIG_MQ_IOSCHED_KYBER=y # CONFIG_IOSCHED_BFQ is not set CONFIG_ASN1=y CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_LOCK_SPIN_ON_OWNER=y CONFIG_XENOMAI=y # # Core features # # CONFIG_XENO_OPT_SCHED_CLASSES is not set CONFIG_XENO_OPT_STATS=y CONFIG_XENO_OPT_STATS_IRQS=y # CONFIG_XENO_OPT_SHIRQ is not set CONFIG_XENO_OPT_RR_QUANTUM=1000 CONFIG_XENO_OPT_AUTOTUNE=y # CONFIG_XENO_OPT_SCALABLE_SCHED is not set CONFIG_XENO_OPT_TIMER_LIST=y # CONFIG_XENO_OPT_TIMER_RBTREE is not set CONFIG_XENO_OPT_HOSTRT=y CONFIG_XENO_OPT_VFILE=y # # Sizes and static limits # CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512 CONFIG_XENO_OPT_SYS_HEAPSZ=4096 CONFIG_XENO_OPT_PRIVATE_HEAPSZ=256 CONFIG_XENO_OPT_SHARED_HEAPSZ=256 CONFIG_XENO_OPT_NRTIMERS=256 # # Latency settings # CONFIG_XENO_OPT_TIMING_SCHEDLAT=0 CONFIG_XENO_OPT_TIMING_KSCHEDLAT=0 CONFIG_XENO_OPT_TIMING_IRQLAT=0 # CONFIG_XENO_OPT_DEBUG is not set # # Drivers # CONFIG_XENO_OPT_RTDM_COMPAT_DEVNODE=y CONFIG_XENO_DRIVERS_AUTOTUNE=y # # Serial drivers # # CONFIG_XENO_DRIVERS_16550A is not set # # Testing drivers # CONFIG_XENO_DRIVERS_TIMERBENCH=y CONFIG_XENO_DRIVERS_SWITCHTEST=y CONFIG_XENO_DRIVERS_HEAPCHECK=y # CONFIG_XENO_DRIVERS_RTDMTEST is not set # # CAN drivers # # CONFIG_XENO_DRIVERS_CAN is not set # # RTnet # # CONFIG_XENO_DRIVERS_NET is not set # # ANALOGY drivers # # CONFIG_XENO_DRIVERS_ANALOGY is not set # # Real-time IPC drivers # # CONFIG_XENO_DRIVERS_RTIPC is not set # # UDD support # # CONFIG_XENO_DRIVERS_UDD is not set # # Real-time GPIO drivers # # CONFIG_XENO_DRIVERS_GPIO is not set # # GPIOPWM support # # CONFIG_XENO_DRIVERS_GPIOPWM is not set # # Real-time SPI master drivers # # # Machine/platform-specific options # CONFIG_XENO_ARCH_UNLOCKED_SWITCH=y CONFIG_IPIPE_WANT_PREEMPTIBLE_SWITCH=y CONFIG_XENO_ARCH_FPU=y CONFIG_XENO_ARCH_OUTOFLINE_XNLOCK=y CONFIG_XENO_VERSION_MAJOR=3 CONFIG_XENO_VERSION_MINOR=1 CONFIG_XENO_REVISION_LEVEL=0 CONFIG_XENO_VERSION_STRING="3.1" CONFIG_FREEZER=y # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_ELF_FDPIC is not set CONFIG_ELFCORE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y # CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COREDUMP=y # # Memory Management options # CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_NO_BOOTMEM=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_COMPACTION is not set CONFIG_BOUNCE=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_CLEANCACHE is not set # CONFIG_FRONTSWAP is not set # CONFIG_CMA is not set # CONFIG_ZPOOL is not set # CONFIG_ZBUD is not set # CONFIG_ZSMALLOC is not set CONFIG_GENERIC_EARLY_IOREMAP=y # CONFIG_IDLE_PAGE_TRACKING is not set # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_BENCHMARK is not set CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y # CONFIG_UNIX_DIAG is not set # CONFIG_TLS is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_INTERFACE is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_IP_FIB_TRIE_STATS is not set CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_NET_IP_TUNNEL=y CONFIG_IP_MROUTE_COMMON=y CONFIG_IP_MROUTE=y # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_SYN_COOKIES=y # CONFIG_NET_FOU is not set # CONFIG_NET_FOU_IP_TUNNELS is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_INET_UDP_DIAG is not set # CONFIG_INET_RAW_DIAG is not set # CONFIG_INET_DIAG_DESTROY is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=y CONFIG_TCP_CONG_HTCP=y # CONFIG_TCP_CONG_HSTCP is not set # CONFIG_TCP_CONG_HYBLA is not set # CONFIG_TCP_CONG_VEGAS is not set # CONFIG_TCP_CONG_NV is not set # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set # CONFIG_TCP_CONG_YEAH is not set # CONFIG_TCP_CONG_ILLINOIS is not set # CONFIG_TCP_CONG_DCTCP is not set # CONFIG_TCP_CONG_CDG is not set # CONFIG_TCP_CONG_BBR is not set # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_VTI is not set CONFIG_IPV6_SIT=y # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_IPV6_SEG6_LWTUNNEL is not set # CONFIG_IPV6_SEG6_HMAC is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_BPFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set CONFIG_HAVE_NET_DSA=y # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_6LOWPAN is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_MPLS is not set # CONFIG_NET_NSH is not set # CONFIG_HSR is not set # CONFIG_NET_SWITCHDEV is not set # CONFIG_NET_L3_MASTER_DEV is not set # CONFIG_NET_NCSI is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_AF_KCM is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set CONFIG_CFG80211_CRDA_SUPPORT=y # CONFIG_CFG80211_WEXT is not set # CONFIG_MAC80211 is not set CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set # CONFIG_PSAMPLE is not set # CONFIG_NET_IFE is not set # CONFIG_LWTUNNEL is not set CONFIG_DST_CACHE=y CONFIG_GRO_CELLS=y # CONFIG_NET_DEVLINK is not set CONFIG_MAY_USE_DEVLINK=y # CONFIG_FAILOVER is not set CONFIG_HAVE_EBPF_JIT=y # # Device Drivers # CONFIG_ARM_AMBA=y # # Generic Driver Options # CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # # Firmware loader # CONFIG_FW_LOADER=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_ALLOW_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set CONFIG_GENERIC_ARCH_TOPOLOGY=y # # Bus devices # # CONFIG_BRCMSTB_GISB_ARB is not set # CONFIG_SIMPLE_PM_BUS is not set # CONFIG_VEXPRESS_CONFIG is not set # CONFIG_CONNECTOR is not set # CONFIG_GNSS is not set CONFIG_MTD=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # # Partition parsers # # # User Modules And Translation Layers # CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # CONFIG_MTD_SWAP is not set # CONFIG_MTD_PARTITIONED_MASTER is not set # # RAM/ROM/Flash chip drivers # # CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_MCHP23K256 is not set # CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOCG3 is not set CONFIG_MTD_NAND_CORE=y # CONFIG_MTD_ONENAND is not set # CONFIG_MTD_NAND is not set CONFIG_MTD_SPI_NAND=y # # LPDDR & LPDDR2 PCM memory drivers # # CONFIG_MTD_LPDDR is not set # CONFIG_MTD_LPDDR2_NVM is not set # CONFIG_MTD_SPI_NOR is not set # CONFIG_MTD_UBI is not set CONFIG_DTC=y CONFIG_OF=y # CONFIG_OF_UNITTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_KOBJ=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_NET=y CONFIG_OF_MDIO=y CONFIG_OF_RESERVED_MEM=y # CONFIG_OF_OVERLAY is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_NULL_BLK is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_RBD is not set # # NVME Support # # CONFIG_NVME_FC is not set # CONFIG_NVME_TARGET is not set # # Misc devices # # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_EEPROM_93XX46 is not set # CONFIG_EEPROM_IDT_89HPESX is not set # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set # CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_ALTERA_STAPL is not set # # Intel MIC & related support # # # Intel MIC Bus Driver # # # SCIF Bus Driver # # # VOP Bus Driver # # # Intel MIC Host Driver # # # Intel MIC Card Driver # # # SCIF Driver # # # Intel MIC Coprocessor State Management (COSM) Drivers # # # VOP Driver # # CONFIG_ECHO is not set # CONFIG_MISC_RTSX_USB is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_MQ_DEFAULT=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_TARGET_CORE is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y # CONFIG_BONDING is not set # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_VXLAN is not set # CONFIG_GTP is not set # CONFIG_MACSEC is not set # CONFIG_NETCONSOLE is not set # CONFIG_TUN is not set # CONFIG_TUN_VNET_CROSS_LE is not set # CONFIG_VETH is not set # CONFIG_NLMON is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # CONFIG_ETHERNET=y CONFIG_NET_VENDOR_ALACRITECH=y # CONFIG_ALTERA_TSE is not set CONFIG_NET_VENDOR_AMAZON=y CONFIG_NET_VENDOR_AQUANTIA=y CONFIG_NET_VENDOR_ARC=y CONFIG_NET_VENDOR_AURORA=y # CONFIG_AURORA_NB8800 is not set CONFIG_NET_VENDOR_BROADCOM=y # CONFIG_B44 is not set # CONFIG_BCMGENET is not set # CONFIG_SYSTEMPORT is not set CONFIG_NET_VENDOR_CADENCE=y # CONFIG_MACB is not set CONFIG_NET_VENDOR_CAVIUM=y CONFIG_NET_VENDOR_CIRRUS=y # CONFIG_CS89x0 is not set CONFIG_NET_VENDOR_CORTINA=y # CONFIG_GEMINI_ETHERNET is not set # CONFIG_DM9000 is not set # CONFIG_DNET is not set CONFIG_NET_VENDOR_EZCHIP=y # CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set CONFIG_NET_VENDOR_FARADAY=y # CONFIG_FTMAC100 is not set # CONFIG_FTGMAC100 is not set CONFIG_NET_VENDOR_HISILICON=y # CONFIG_HIX5HD2_GMAC is not set # CONFIG_HISI_FEMAC is not set # CONFIG_HIP04_ETH is not set # CONFIG_HNS is not set # CONFIG_HNS_DSAF is not set # CONFIG_HNS_ENET is not set CONFIG_NET_VENDOR_HUAWEI=y CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_INTEL=y CONFIG_NET_VENDOR_MARVELL=y # CONFIG_MVMDIO is not set CONFIG_NET_VENDOR_MELLANOX=y # CONFIG_MLXSW_CORE is not set # CONFIG_MLXFW is not set CONFIG_NET_VENDOR_MICREL=y # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set CONFIG_NET_VENDOR_MICROCHIP=y # CONFIG_ENC28J60 is not set # CONFIG_ENCX24J600 is not set CONFIG_NET_VENDOR_MICROSEMI=y CONFIG_NET_VENDOR_NATSEMI=y CONFIG_NET_VENDOR_NETRONOME=y CONFIG_NET_VENDOR_NI=y CONFIG_NET_VENDOR_8390=y # CONFIG_AX88796 is not set # CONFIG_ETHOC is not set CONFIG_NET_VENDOR_QUALCOMM=y # CONFIG_QCA7000_SPI is not set # CONFIG_QCOM_EMAC is not set # CONFIG_RMNET is not set CONFIG_NET_VENDOR_RENESAS=y CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SAMSUNG=y # CONFIG_SXGBE_ETH is not set CONFIG_NET_VENDOR_SEEQ=y CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_SMSC=y # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set CONFIG_NET_VENDOR_SOCIONEXT=y CONFIG_NET_VENDOR_STMICRO=y # CONFIG_STMMAC_ETH is not set CONFIG_NET_VENDOR_SYNOPSYS=y # CONFIG_DWC_XLGMAC is not set CONFIG_NET_VENDOR_VIA=y # CONFIG_VIA_RHINE is not set # CONFIG_VIA_VELOCITY is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set CONFIG_NET_VENDOR_ASR=y CONFIG_ASR_EMAC=y CONFIG_MDIO_DEVICE=y CONFIG_MDIO_BUS=y # CONFIG_MDIO_BCM_UNIMAC is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_MDIO_BUS_MUX_GPIO is not set # CONFIG_MDIO_BUS_MUX_MMIOREG is not set # CONFIG_MDIO_HISI_FEMAC is not set # CONFIG_MDIO_MSCC_MIIM is not set CONFIG_PHYLIB=y CONFIG_SWPHY=y # # MII PHY device drivers # # CONFIG_AMD_PHY is not set # CONFIG_AQUANTIA_PHY is not set # CONFIG_AX88796B_PHY is not set # CONFIG_AT803X_PHY is not set # CONFIG_BCM7XXX_PHY is not set # CONFIG_BCM87XX_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_CORTINA_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_DP83822_PHY is not set # CONFIG_DP83TC811_PHY is not set # CONFIG_DP83848_PHY is not set # CONFIG_DP83867_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_INTEL_XWAY_PHY is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_LXT_PHY is not set CONFIG_MARVELL_PHY=y # CONFIG_MARVELL_10G_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_MICROCHIP_PHY is not set # CONFIG_MICROCHIP_T1_PHY is not set # CONFIG_MICROSEMI_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_QSEMI_PHY is not set CONFIG_REALTEK_PHY=y # CONFIG_RENESAS_PHY is not set # CONFIG_ROCKCHIP_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_STE10XP is not set # CONFIG_TERANETICS_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_XILINX_GMII2RGMII is not set # CONFIG_MICREL_KS8995MA is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set CONFIG_USB_NET_DRIVERS=y # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_RTL8152 is not set # CONFIG_USB_LAN78XX is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set CONFIG_WLAN=y # CONFIG_WIRELESS_WDS is not set # CONFIG_WLAN_VENDOR_ADMTEK is not set # CONFIG_WLAN_VENDOR_ATH is not set # CONFIG_WLAN_VENDOR_ATMEL is not set # CONFIG_WLAN_VENDOR_BROADCOM is not set # CONFIG_WLAN_VENDOR_CISCO is not set # CONFIG_WLAN_VENDOR_INTEL is not set # CONFIG_WLAN_VENDOR_INTERSIL is not set # CONFIG_WLAN_VENDOR_MARVELL is not set # CONFIG_WLAN_VENDOR_MEDIATEK is not set # CONFIG_WLAN_VENDOR_RALINK is not set CONFIG_WLAN_VENDOR_REALTEK=y CONFIG_RTL8821CS=m # CONFIG_WLAN_VENDOR_RSI is not set # CONFIG_WLAN_VENDOR_ST is not set # CONFIG_WLAN_VENDOR_TI is not set # CONFIG_WLAN_VENDOR_ZYDAS is not set # CONFIG_WLAN_VENDOR_QUANTENNA is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_NETDEVSIM is not set # CONFIG_NET_FAILOVER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # CONFIG_INPUT_MATRIXKMAP is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_ACECAD is not set # CONFIG_TABLET_USB_AIPTEK is not set # CONFIG_TABLET_USB_GTCO is not set # CONFIG_TABLET_USB_HANWANG is not set # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_PEGASUS is not set # CONFIG_TABLET_SERIAL_WACOM4 is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y CONFIG_TOUCHSCREEN_GT9XX=m # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_ADC is not set # CONFIG_TOUCHSCREEN_AR1021_I2C is not set # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_BU21029 is not set # CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_EGALAX is not set # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set # CONFIG_TOUCHSCREEN_EXC3000 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GOODIX is not set # CONFIG_TOUCHSCREEN_HIDEEP is not set # CONFIG_TOUCHSCREEN_ILI210X is not set # CONFIG_TOUCHSCREEN_S6SY761 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_EKTF2127 is not set # CONFIG_TOUCHSCREEN_ELAN is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_WACOM_I2C is not set # CONFIG_TOUCHSCREEN_MAX11801 is not set # CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MMS114 is not set # CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_PIXCIR is not set # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC_SERIO is not set # CONFIG_TOUCHSCREEN_TSC2004 is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_RM_TS is not set # CONFIG_TOUCHSCREEN_SILEAD is not set # CONFIG_TOUCHSCREEN_SIS_I2C is not set # CONFIG_TOUCHSCREEN_ST1232 is not set # CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set # CONFIG_TOUCHSCREEN_SX8654 is not set # CONFIG_TOUCHSCREEN_TPS6507X is not set # CONFIG_TOUCHSCREEN_ZET6223 is not set # CONFIG_TOUCHSCREEN_ZFORCE is not set # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATMEL_CAPTOUCH is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_E3X0_BUTTON is not set # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_GP2A is not set # CONFIG_INPUT_GPIO_BEEPER is not set # CONFIG_INPUT_GPIO_DECODER is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_KXTJ9 is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_REGULATOR_HAPTIC is not set CONFIG_INPUT_UINPUT=y # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_PWM_BEEPER is not set # CONFIG_INPUT_PWM_VIBRA is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_CMA3000 is not set # CONFIG_INPUT_DRV260X_HAPTICS is not set # CONFIG_INPUT_DRV2665_HAPTICS is not set # CONFIG_INPUT_DRV2667_HAPTICS is not set # CONFIG_RMI4_CORE is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set CONFIG_LDISC_AUTOLOAD=y CONFIG_DEVMEM=y # CONFIG_DEVKMEM is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # # CONFIG_SERIAL_AMBA_PL010 is not set # CONFIG_SERIAL_AMBA_PL011 is not set # CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX310X is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_NON8250=y CONFIG_SERIAL_PXA_CONSOLE=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_BCM63XX is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_IFX6X60 is not set # CONFIG_SERIAL_XILINX_PS_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set # CONFIG_SERIAL_ST_ASC is not set # CONFIG_SERIAL_DEV_BUS is not set # CONFIG_TTY_PRINTK is not set # CONFIG_HVC_DCC is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_ASR=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_XILLYBUS is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y # # Multiplexer I2C Chip support # # CONFIG_I2C_ARB_GPIO_CHALLENGE is not set # CONFIG_I2C_MUX_GPIO is not set # CONFIG_I2C_MUX_GPMUX is not set # CONFIG_I2C_MUX_LTC4306 is not set # CONFIG_I2C_MUX_PCA9541 is not set # CONFIG_I2C_MUX_PCA954x is not set # CONFIG_I2C_MUX_PINCTRL is not set # CONFIG_I2C_MUX_REG is not set # CONFIG_I2C_DEMUX_PINCTRL is not set # CONFIG_I2C_MUX_MLXCPLD is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_ASR=y # CONFIG_I2C_CBUS_GPIO is not set # CONFIG_I2C_DESIGNWARE_PLATFORM is not set # CONFIG_I2C_EMEV2 is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_NOMADIK is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_RK3X is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_ROBOTFUZZ_OSIF is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_SLAVE is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set CONFIG_SPI_ASR=y CONFIG_SPI_ASR_QSPI=y # CONFIG_SPI_AXI_SPI_ENGINE is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_CADENCE is not set # CONFIG_SPI_DESIGNWARE is not set # CONFIG_SPI_GPIO is not set # CONFIG_SPI_FSL_SPI is not set # CONFIG_SPI_OC_TINY is not set # CONFIG_SPI_PL022 is not set # CONFIG_SPI_ROCKCHIP is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_ZYNQMP_GQSPI is not set # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=y # CONFIG_SPI_LOOPBACK_TEST is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_SLAVE is not set # CONFIG_SPMI is not set # CONFIG_HSI is not set # CONFIG_PPS is not set # # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PINCTRL=y CONFIG_GENERIC_PINCTRL_GROUPS=y CONFIG_PINMUX=y CONFIG_GENERIC_PINMUX_FUNCTIONS=y CONFIG_PINCONF=y CONFIG_GENERIC_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set # CONFIG_PINCTRL_AMD is not set # CONFIG_PINCTRL_MCP23S08 is not set CONFIG_PINCTRL_SINGLE=y # CONFIG_PINCTRL_SX150X is not set CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_GPIOLIB=y CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_OF_GPIO=y # CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO drivers # # CONFIG_GPIO_74XX_MMIO is not set # CONFIG_GPIO_ALTERA is not set CONFIG_GPIO_ASR=y # CONFIG_GPIO_DWAPB is not set # CONFIG_GPIO_FTGPIO010 is not set # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_GRGPIO is not set # CONFIG_GPIO_HLWD is not set # CONFIG_GPIO_MB86S7X is not set # CONFIG_GPIO_MOCKUP is not set # CONFIG_GPIO_MPC8XXX is not set # CONFIG_GPIO_PL061 is not set # CONFIG_GPIO_XILINX is not set # CONFIG_GPIO_ZEVIO is not set # # I2C GPIO expanders # # CONFIG_GPIO_ADP5588 is not set # CONFIG_GPIO_ADNP is not set # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_TPIC2810 is not set # # MFD GPIO expanders # # CONFIG_HTC_EGPIO is not set # # SPI GPIO expanders # # CONFIG_GPIO_74X164 is not set # CONFIG_GPIO_MAX3191X is not set # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set # CONFIG_GPIO_XRA1403 is not set # # USB GPIO expanders # # CONFIG_W1 is not set # CONFIG_POWER_AVS is not set # CONFIG_POWER_RESET is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_OF=y # CONFIG_THERMAL_WRITABLE_TRIPS is not set CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y # CONFIG_THERMAL_GOV_BANG_BANG is not set # CONFIG_THERMAL_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_BI_DIRECTION=y # CONFIG_CLOCK_THERMAL is not set # CONFIG_DEVFREQ_THERMAL is not set # CONFIG_THERMAL_EMULATION is not set # CONFIG_QORIQ_THERMAL is not set CONFIG_FINCH_THERMAL=y # # ACPI INT340X thermal drivers # # CONFIG_GENERIC_ADC_THERMAL is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y # CONFIG_WATCHDOG_SYSFS is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_GPIO_WATCHDOG is not set # CONFIG_XILINX_WATCHDOG is not set # CONFIG_ZIIRAVE_WATCHDOG is not set # CONFIG_ARM_SP805_WATCHDOG is not set CONFIG_ASR_WATCHDOG=y # CONFIG_CADENCE_WATCHDOG is not set # CONFIG_FTWDT010_WATCHDOG is not set # CONFIG_DW_WATCHDOG is not set # CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_MEN_A21_WDT is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set # # Watchdog Pretimeout Governors # # CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y # CONFIG_MFD_ACT8945A is not set # CONFIG_MFD_AS3711 is not set # CONFIG_MFD_AS3722 is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_AAT2870_CORE is not set CONFIG_MFD_ASR_PM802=y # CONFIG_MFD_ATMEL_FLEXCOM is not set # CONFIG_MFD_ATMEL_HLCDC is not set # CONFIG_MFD_BCM590XX is not set # CONFIG_MFD_BD9571MWV is not set # CONFIG_MFD_AXP20X_I2C is not set # CONFIG_MFD_CROS_EC is not set # CONFIG_MFD_MADERA is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_MFD_DA9062 is not set # CONFIG_MFD_DA9063 is not set # CONFIG_MFD_DA9150 is not set # CONFIG_MFD_DLN2 is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_MFD_HI6421_PMIC is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_I2CPLD is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_MAX14577 is not set # CONFIG_MFD_MAX77620 is not set # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX77843 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_MT6397 is not set # CONFIG_MFD_MENF21BMC is not set # CONFIG_EZX_PCAP is not set # CONFIG_MFD_CPCAP is not set # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_PM8XXX is not set # CONFIG_MFD_RT5033 is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_RK808 is not set # CONFIG_MFD_RN5T618 is not set # CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_SKY81452 is not set # CONFIG_MFD_SMSC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP3943 is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_TI_LMU is not set # CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65086 is not set # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TI_LP873X is not set # CONFIG_MFD_TI_LP87565 is not set # CONFIG_MFD_TPS65218 is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS65910 is not set # CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS65912_SPI is not set # CONFIG_MFD_TPS80031 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_ROHM_BD718XX is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_88PG86X is not set # CONFIG_REGULATOR_ACT8865 is not set # CONFIG_REGULATOR_AD5398 is not set CONFIG_REGULATOR_ASR_PM802=y # CONFIG_REGULATOR_DA9210 is not set # CONFIG_REGULATOR_DA9211 is not set # CONFIG_REGULATOR_FAN53555 is not set # CONFIG_REGULATOR_GPIO is not set # CONFIG_REGULATOR_ISL9305 is not set # CONFIG_REGULATOR_ISL6271A is not set # CONFIG_REGULATOR_LP3971 is not set # CONFIG_REGULATOR_LP3972 is not set # CONFIG_REGULATOR_LP872X is not set # CONFIG_REGULATOR_LP8755 is not set # CONFIG_REGULATOR_LTC3589 is not set # CONFIG_REGULATOR_LTC3676 is not set # CONFIG_REGULATOR_MAX1586 is not set # CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set # CONFIG_REGULATOR_MAX8952 is not set # CONFIG_REGULATOR_MAX8973 is not set # CONFIG_REGULATOR_MT6311 is not set # CONFIG_REGULATOR_PFUZE100 is not set # CONFIG_REGULATOR_PV88060 is not set # CONFIG_REGULATOR_PV88080 is not set # CONFIG_REGULATOR_PV88090 is not set # CONFIG_REGULATOR_PWM is not set # CONFIG_REGULATOR_SY8106A is not set # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set # CONFIG_REGULATOR_TPS65132 is not set # CONFIG_REGULATOR_TPS6524X is not set # CONFIG_REGULATOR_VCTRL is not set # CONFIG_RC_CORE is not set CONFIG_MEDIA_SUPPORT=y # # Multimedia core support # CONFIG_MEDIA_CAMERA_SUPPORT=y # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set # CONFIG_MEDIA_RADIO_SUPPORT is not set # CONFIG_MEDIA_SDR_SUPPORT is not set # CONFIG_MEDIA_CEC_SUPPORT is not set CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set # # Media drivers # # CONFIG_MEDIA_USB_SUPPORT is not set # CONFIG_V4L_PLATFORM_DRIVERS is not set # CONFIG_V4L_MEM2MEM_DRIVERS is not set # CONFIG_V4L_TEST_DRIVERS is not set # # ASR MARS10 Camera And Video # CONFIG_MARS10_CAMERA=y CONFIG_MARS10_CPP=y CONFIG_MARS10_VBE=y CONFIG_MARS10_VI=y CONFIG_MARS10_CCIC=y CONFIG_MARS10_ISP=y CONFIG_MARS10_SENSOR=y CONFIG_MARS10_IRCUT=y # # Supported MMC/SDIO adapters # # CONFIG_CYPRESS_FIRMWARE is not set CONFIG_VIDEOBUF2_CORE=y CONFIG_VIDEOBUF2_V4L2=y # # Media ancillary drivers (tuners, sensors, i2c, spi, frontends) # CONFIG_MEDIA_SUBDRV_AUTOSELECT=y # # Audio decoders, processors and mixers # # # RDS decoders # # # Video decoders # # # Video and audio decoders # # # Video encoders # # # Camera sensor devices # # # Flash devices # # # Video improvement chips # # # Audio/Video compression chips # # # SDR tuner chips # # # Miscellaneous helper chips # # # Sensors used on soc_camera driver # # # Media SPI Adapters # # # Tools to develop new frontends # # # Graphics support # # CONFIG_IMX_IPUV3_CORE is not set CONFIG_DRM=y # CONFIG_DRM_DP_AUX_CHARDEV is not set # CONFIG_DRM_DEBUG_MM is not set # CONFIG_DRM_DEBUG_SELFTEST is not set CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_KMS_FB_HELPER=y CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set # CONFIG_DRM_DP_CEC is not set # # I2C encoder or helper chips # # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I2C_NXP_TDA998X is not set # CONFIG_DRM_I2C_NXP_TDA9950 is not set # CONFIG_DRM_HDLCD is not set # CONFIG_DRM_MALI_DISPLAY is not set # # ACP (Audio CoProcessor) Configuration # # # AMD Library routines # # CONFIG_DRM_VGEM is not set # CONFIG_DRM_VKMS is not set # CONFIG_DRM_EXYNOS is not set # CONFIG_DRM_UDL is not set # CONFIG_DRM_ARMADA is not set # CONFIG_DRM_RCAR_DW_HDMI is not set # CONFIG_DRM_RCAR_LVDS is not set # CONFIG_DRM_OMAP is not set # CONFIG_DRM_TILCDC is not set # CONFIG_DRM_FSL_DCU is not set # CONFIG_DRM_STM is not set CONFIG_DRM_PANEL=y # # Display Panels # # CONFIG_DRM_PANEL_ILITEK_IL9322 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set # CONFIG_DRM_PANEL_LG_LG4573 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # # CONFIG_DRM_ANALOGIX_ANX78XX is not set # CONFIG_DRM_CDNS_DSI is not set # CONFIG_DRM_DUMB_VGA_DAC is not set # CONFIG_DRM_LVDS_ENCODER is not set # CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set # CONFIG_DRM_NXP_PTN3460 is not set # CONFIG_DRM_PARADE_PS8622 is not set # CONFIG_DRM_SIL_SII8620 is not set # CONFIG_DRM_SII902X is not set # CONFIG_DRM_SII9234 is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TOSHIBA_TC358767 is not set # CONFIG_DRM_TI_TFP410 is not set # CONFIG_DRM_I2C_ADV7511 is not set # CONFIG_DRM_STI is not set # CONFIG_DRM_ARCPGU is not set # CONFIG_DRM_MXSFB is not set # CONFIG_DRM_TINYDRM is not set # CONFIG_DRM_PL111 is not set # CONFIG_DRM_LEGACY is not set CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y CONFIG_DRM_ASR=y CONFIG_DRM_ASR_TEST=y # # Frame buffer Devices # CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_CMDLINE=y CONFIG_FB_NOTIFY=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_ARMCLCD is not set # CONFIG_FB_OPENCORES is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_SIMPLE is not set CONFIG_FB_ASR=m CONFIG_FB_USE_FRAMEBUFFER=y CONFIG_LCD_MIPI=y CONFIG_LCD_HDMI=y CONFIG_LCD_HDMI_EDID=y CONFIG_LCD_DUMMY=m CONFIG_LCD_GC9503=m CONFIG_LCD_OTM1901A=m # CONFIG_FB_SSD1307 is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set CONFIG_ALLEGRO_CODEC_DRIVER=y CONFIG_BT656=m CONFIG_HDMI=y # # Console display driver support # CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_DMAENGINE_PCM=y CONFIG_SND_COMPRESS_OFFLOAD=y CONFIG_SND_JACK=y CONFIG_SND_JACK_INPUT_DEV=y # CONFIG_SND_OSSEMUL is not set CONFIG_SND_PCM_TIMER=y # CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_PROC_FS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # CONFIG_SND_SEQUENCER is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_ALOOP is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # HD-Audio # CONFIG_SND_HDA_PREALLOC_SIZE=64 CONFIG_SND_ARM=y # CONFIG_SND_ARMAACI is not set CONFIG_SND_SPI=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_USB_6FIRE is not set # CONFIG_SND_USB_HIFACE is not set # CONFIG_SND_BCD2000 is not set # CONFIG_SND_USB_POD is not set # CONFIG_SND_USB_PODHD is not set # CONFIG_SND_USB_TONEPORT is not set # CONFIG_SND_USB_VARIAX is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y CONFIG_SND_SOC_COMPRESS=y # CONFIG_SND_SOC_AMD_ACP is not set # CONFIG_SND_ATMEL_SOC is not set # CONFIG_SND_DESIGNWARE_I2S is not set # # SoC Audio for Freescale CPUs # # # Common SoC Audio options for Freescale CPUs: # # CONFIG_SND_SOC_FSL_ASRC is not set # CONFIG_SND_SOC_FSL_SAI is not set # CONFIG_SND_SOC_FSL_SSI is not set # CONFIG_SND_SOC_FSL_SPDIF is not set # CONFIG_SND_SOC_FSL_ESAI is not set # CONFIG_SND_SOC_IMX_AUDMUX is not set # CONFIG_SND_I2S_HI6210_I2S is not set # CONFIG_SND_SOC_IMG is not set # # STMicroelectronics STM32 SOC audio support # # CONFIG_SND_SOC_XTFPGA_I2S is not set # CONFIG_ZX_TDM is not set CONFIG_SND_SOC_ASR=y # CONFIG_SND_SOC_ASR_MA5208 is not set # CONFIG_SND_SOC_ASR_88PM860 is not set # CONFIG_SND_SOC_ASR_NO_DEV_TREE is not set # CONFIG_SND_SOC_ASR_EXT_PA_AW8736 is not set # CONFIG_SND_SOC_ASR_EXT_PA_AW87339 is not set CONFIG_SND_SOC_EXT_PA_GPIO=y CONFIG_SND_SOC_ASR_SUPPORT_EXT_PA=y CONFIG_SND_SOC_I2C_AND_SPI=y # # CODEC drivers # # CONFIG_SND_SOC_AC97_CODEC is not set # CONFIG_SND_SOC_ADAU1701 is not set # CONFIG_SND_SOC_ADAU1761_I2C is not set # CONFIG_SND_SOC_ADAU1761_SPI is not set # CONFIG_SND_SOC_ADAU7002 is not set # CONFIG_SND_SOC_AK4104 is not set # CONFIG_SND_SOC_AK4458 is not set # CONFIG_SND_SOC_AK4554 is not set # CONFIG_SND_SOC_AK4613 is not set # CONFIG_SND_SOC_AK4642 is not set # CONFIG_SND_SOC_AK5386 is not set # CONFIG_SND_SOC_AK5558 is not set # CONFIG_SND_SOC_ALC5623 is not set # CONFIG_SND_SOC_BD28623 is not set # CONFIG_SND_SOC_BT_SCO is not set # CONFIG_SND_SOC_CS35L32 is not set # CONFIG_SND_SOC_CS35L33 is not set # CONFIG_SND_SOC_CS35L34 is not set # CONFIG_SND_SOC_CS35L35 is not set # CONFIG_SND_SOC_CS42L42 is not set # CONFIG_SND_SOC_CS42L51_I2C is not set # CONFIG_SND_SOC_CS42L52 is not set # CONFIG_SND_SOC_CS42L56 is not set # CONFIG_SND_SOC_CS42L73 is not set # CONFIG_SND_SOC_CS4265 is not set # CONFIG_SND_SOC_CS4270 is not set # CONFIG_SND_SOC_CS4271_I2C is not set # CONFIG_SND_SOC_CS4271_SPI is not set # CONFIG_SND_SOC_CS42XX8_I2C is not set # CONFIG_SND_SOC_CS43130 is not set # CONFIG_SND_SOC_CS4349 is not set # CONFIG_SND_SOC_CS53L30 is not set # CONFIG_SND_SOC_ES7134 is not set # CONFIG_SND_SOC_ES7241 is not set # CONFIG_SND_SOC_ES8316 is not set # CONFIG_SND_SOC_ES8328_I2C is not set # CONFIG_SND_SOC_ES8328_SPI is not set # CONFIG_SND_SOC_GTM601 is not set # CONFIG_SND_SOC_INNO_RK3036 is not set # CONFIG_SND_SOC_MAX98504 is not set # CONFIG_SND_SOC_MAX9867 is not set # CONFIG_SND_SOC_MAX98927 is not set # CONFIG_SND_SOC_MAX98373 is not set # CONFIG_SND_SOC_MAX9860 is not set # CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set # CONFIG_SND_SOC_PCM1681 is not set # CONFIG_SND_SOC_PCM1789_I2C is not set # CONFIG_SND_SOC_PCM179X_I2C is not set # CONFIG_SND_SOC_PCM179X_SPI is not set # CONFIG_SND_SOC_PCM186X_I2C is not set # CONFIG_SND_SOC_PCM186X_SPI is not set # CONFIG_SND_SOC_PCM3168A_I2C is not set # CONFIG_SND_SOC_PCM3168A_SPI is not set # CONFIG_SND_SOC_PCM512x_I2C is not set # CONFIG_SND_SOC_PCM512x_SPI is not set # CONFIG_SND_SOC_RT5616 is not set # CONFIG_SND_SOC_RT5631 is not set # CONFIG_SND_SOC_SGTL5000 is not set # CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set # CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set # CONFIG_SND_SOC_SPDIF is not set # CONFIG_SND_SOC_SSM2305 is not set # CONFIG_SND_SOC_SSM2602_SPI is not set # CONFIG_SND_SOC_SSM2602_I2C is not set # CONFIG_SND_SOC_SSM4567 is not set # CONFIG_SND_SOC_STA32X is not set # CONFIG_SND_SOC_STA350 is not set # CONFIG_SND_SOC_STI_SAS is not set # CONFIG_SND_SOC_TAS2552 is not set # CONFIG_SND_SOC_TAS5086 is not set # CONFIG_SND_SOC_TAS571X is not set # CONFIG_SND_SOC_TAS5720 is not set # CONFIG_SND_SOC_TAS6424 is not set # CONFIG_SND_SOC_TDA7419 is not set # CONFIG_SND_SOC_TFA9879 is not set # CONFIG_SND_SOC_TLV320AIC23_I2C is not set # CONFIG_SND_SOC_TLV320AIC23_SPI is not set # CONFIG_SND_SOC_TLV320AIC31XX is not set # CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set # CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set # CONFIG_SND_SOC_TLV320AIC3X is not set # CONFIG_SND_SOC_TS3A227E is not set # CONFIG_SND_SOC_TSCS42XX is not set # CONFIG_SND_SOC_TSCS454 is not set # CONFIG_SND_SOC_WM8510 is not set # CONFIG_SND_SOC_WM8523 is not set # CONFIG_SND_SOC_WM8524 is not set # CONFIG_SND_SOC_WM8580 is not set # CONFIG_SND_SOC_WM8711 is not set # CONFIG_SND_SOC_WM8728 is not set # CONFIG_SND_SOC_WM8731 is not set # CONFIG_SND_SOC_WM8737 is not set # CONFIG_SND_SOC_WM8741 is not set # CONFIG_SND_SOC_WM8750 is not set # CONFIG_SND_SOC_WM8753 is not set # CONFIG_SND_SOC_WM8770 is not set # CONFIG_SND_SOC_WM8776 is not set # CONFIG_SND_SOC_WM8782 is not set # CONFIG_SND_SOC_WM8804_I2C is not set # CONFIG_SND_SOC_WM8804_SPI is not set # CONFIG_SND_SOC_WM8903 is not set # CONFIG_SND_SOC_WM8960 is not set # CONFIG_SND_SOC_WM8962 is not set # CONFIG_SND_SOC_WM8974 is not set # CONFIG_SND_SOC_WM8978 is not set # CONFIG_SND_SOC_WM8985 is not set # CONFIG_SND_SOC_ZX_AUD96P22 is not set # CONFIG_SND_SOC_MAX9759 is not set # CONFIG_SND_SOC_MT6351 is not set # CONFIG_SND_SOC_NAU8540 is not set # CONFIG_SND_SOC_NAU8810 is not set # CONFIG_SND_SOC_NAU8824 is not set # CONFIG_SND_SOC_TPA6130A2 is not set CONFIG_SND_SOC_DFECODEC=y CONFIG_SND_SOC_ASR_HDMI_CODEC=y # CONFIG_SND_SIMPLE_CARD is not set # CONFIG_SND_SIMPLE_SCU_CARD is not set # CONFIG_SND_AUDIO_GRAPH_CARD is not set # CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set # # HID support # CONFIG_HID=y # CONFIG_HID_BATTERY_STRENGTH is not set # CONFIG_HIDRAW is not set # CONFIG_UHID is not set CONFIG_HID_GENERIC=y # # Special HID drivers # # CONFIG_HID_A4TECH is not set # CONFIG_HID_ACCUTOUCH is not set # CONFIG_HID_ACRUX is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_BETOP_FF is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_COUGAR is not set # CONFIG_HID_PRODIKEYS is not set # CONFIG_HID_CMEDIA is not set # CONFIG_HID_CYPRESS is not set # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set # CONFIG_HID_ELECOM is not set # CONFIG_HID_ELO is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_GEMBIRD is not set # CONFIG_HID_GFRM is not set # CONFIG_HID_HOLTEK is not set # CONFIG_HID_KEYTOUCH is not set # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_ICADE is not set # CONFIG_HID_ITE is not set # CONFIG_HID_JABRA is not set # CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MAGICMOUSE is not set # CONFIG_HID_MAYFLASH is not set # CONFIG_HID_REDRAGON is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTI is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PENMOUNT is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_PLANTRONICS is not set # CONFIG_HID_PRIMAX is not set # CONFIG_HID_RETRODE is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SPEEDLINK is not set # CONFIG_HID_STEAM is not set # CONFIG_HID_STEELSERIES is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_RMI is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_UDRAW_PS3 is not set # CONFIG_HID_WACOM is not set # CONFIG_HID_XINMO is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set # CONFIG_HID_ALPS is not set # # USB HID support # CONFIG_USB_HID=y # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_OTG_FSM is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_ASRCI=y CONFIG_USB_EHCI_HCD_PLATFORM=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_FOTG210_HCD is not set # CONFIG_USB_MAX3421_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set CONFIG_USB_UAS=y # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USBIP_CORE is not set # CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_DWC3 is not set # CONFIG_USB_DWC2 is not set # CONFIG_USB_CHIPIDEA is not set # CONFIG_USB_ISP1760 is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set # CONFIG_USB_HUB_USB251XB is not set # CONFIG_USB_HSIC_USB3503 is not set # CONFIG_USB_HSIC_USB4604 is not set # CONFIG_USB_LINK_LAYER_TEST is not set # CONFIG_USB_CHAOSKEY is not set # # USB Physical Layer drivers # CONFIG_USB_PHY=y # CONFIG_NOP_USB_XCEIV is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ISP1301 is not set CONFIG_USB_ASRCI_OTG=y CONFIG_ASRCI_USB2_PHY=y # CONFIG_USB_ULPI is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 # # USB Peripheral Controller # # CONFIG_USB_FUSB300 is not set # CONFIG_USB_FOTG210_UDC is not set # CONFIG_USB_GR_UDC is not set # CONFIG_USB_R8A66597 is not set # CONFIG_USB_PXA27X is not set # CONFIG_USB_MV_UDC is not set CONFIG_USB_ASRCI_UDC=y # CONFIG_USB_MV_U3D is not set # CONFIG_USB_SNP_UDC_PLAT is not set # CONFIG_USB_M66592 is not set # CONFIG_USB_BDC_UDC is not set # CONFIG_USB_NET2272 is not set # CONFIG_USB_GADGET_XILINX is not set # CONFIG_USB_DUMMY_HCD is not set CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_U_ETHER=y CONFIG_USB_F_RNDIS=y CONFIG_USB_CONFIGFS=y # CONFIG_USB_CONFIGFS_SERIAL is not set # CONFIG_USB_CONFIGFS_ACM is not set # CONFIG_USB_CONFIGFS_OBEX is not set # CONFIG_USB_CONFIGFS_NCM is not set # CONFIG_USB_CONFIGFS_ECM is not set # CONFIG_USB_CONFIGFS_ECM_SUBSET is not set CONFIG_USB_CONFIGFS_RNDIS=y # CONFIG_USB_CONFIGFS_EEM is not set # CONFIG_USB_CONFIGFS_MASS_STORAGE is not set # CONFIG_USB_CONFIGFS_F_LB_SS is not set # CONFIG_USB_CONFIGFS_F_FS is not set # CONFIG_USB_CONFIGFS_F_UAC1 is not set # CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set # CONFIG_USB_CONFIGFS_F_UAC2 is not set # CONFIG_USB_CONFIGFS_F_MIDI is not set # CONFIG_USB_CONFIGFS_F_HID is not set # CONFIG_USB_CONFIGFS_F_UVC is not set # CONFIG_USB_CONFIGFS_F_PRINTER is not set # CONFIG_TYPEC is not set # CONFIG_USB_ROLE_SWITCH is not set # CONFIG_USB_ULPI_BUS is not set # CONFIG_UWB is not set CONFIG_MMC=y CONFIG_PWRSEQ_EMMC=y CONFIG_PWRSEQ_SIMPLE=y CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_MINORS=8 # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_ARMMMCI is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y # CONFIG_MMC_SDHCI_OF_ARASAN is not set # CONFIG_MMC_SDHCI_OF_AT91 is not set # CONFIG_MMC_SDHCI_OF_DWCMSHC is not set # CONFIG_MMC_SDHCI_CADENCE is not set # CONFIG_MMC_SDHCI_F_SDH30 is not set # CONFIG_MMC_SPI is not set # CONFIG_MMC_DW is not set # CONFIG_MMC_VUB300 is not set # CONFIG_MMC_USHC is not set # CONFIG_MMC_USDHI6ROL0 is not set # CONFIG_MMC_CQHCI is not set # CONFIG_MMC_MTK is not set # CONFIG_MMC_SDHCI_XENON is not set # CONFIG_MMC_SDHCI_OMAP is not set CONFIG_MMC_SDHCI_ASR=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_SYSTOHC=y CONFIG_RTC_SYSTOHC_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set CONFIG_RTC_NVMEM=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_ABB5ZES3 is not set # CONFIG_RTC_DRV_ABX80X is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_HYM8563 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_ISL12026 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF85063 is not set # CONFIG_RTC_DRV_PCF85363 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8010 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV8803 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1302 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1343 is not set # CONFIG_RTC_DRV_DS1347 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6916 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RX4581 is not set # CONFIG_RTC_DRV_RX6110 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_MCP795 is not set CONFIG_RTC_I2C_AND_SPI=y # # SPI and I2C RTC drivers # # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1685_FAMILY is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_DS2404 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_ZYNQMP is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_SA1100=y CONFIG_ASR_EXT_RTC=y # CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set # CONFIG_RTC_DRV_FTRTC010 is not set # CONFIG_RTC_DRV_SNVS is not set # CONFIG_RTC_DRV_R7301 is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # CONFIG_DMA_ENGINE=y CONFIG_DMA_OF=y # CONFIG_ALTERA_MSGDMA is not set # CONFIG_AMBA_PL08X is not set # CONFIG_DW_AXI_DMAC is not set # CONFIG_FSL_EDMA is not set # CONFIG_INTEL_IDMA64 is not set CONFIG_MMP_PDMA=y CONFIG_MMP_ASRAM=y CONFIG_MMP_TDMA=y # CONFIG_NBPFAXI_DMA is not set # CONFIG_PL330_DMA is not set # CONFIG_QCOM_HIDMA_MGMT is not set # CONFIG_QCOM_HIDMA is not set # CONFIG_DW_DMAC is not set # # DMA Clients # # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # # DMABUF options # CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=y # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_DMEM_GENIRQ is not set # CONFIG_UIO_PRUSS is not set CONFIG_UIO_NPU=y # CONFIG_VIRT_DRIVERS is not set # CONFIG_VIRTIO_MENU is not set # # Microsoft Hyper-V guest support # # CONFIG_STAGING is not set # CONFIG_GOLDFISH is not set # CONFIG_CHROME_PLATFORMS is not set # CONFIG_MELLANOX_PLATFORM is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # # Common Clock Framework # # CONFIG_CLK_HSDK is not set # CONFIG_COMMON_CLK_MAX9485 is not set # CONFIG_COMMON_CLK_SI5351 is not set # CONFIG_COMMON_CLK_SI514 is not set # CONFIG_COMMON_CLK_SI544 is not set # CONFIG_COMMON_CLK_SI570 is not set # CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_CDCE925 is not set # CONFIG_COMMON_CLK_CS2000_CP is not set # CONFIG_CLK_QORIQ is not set # CONFIG_COMMON_CLK_PWM is not set # CONFIG_COMMON_CLK_VC5 is not set CONFIG_ASR_CLK=y CONFIG_ASR_CORE_CLK=y CONFIG_ASR_DVFS=y CONFIG_ASR_PM_DOMAIN=y # CONFIG_LCD_RGB_WVGA is not set # CONFIG_HWSPINLOCK is not set # # Clock Source drivers # CONFIG_TIMER_OF=y CONFIG_TIMER_PROBE=y CONFIG_ARM_ARCH_TIMER=y CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y # CONFIG_ARM_TIMER_SP804 is not set # CONFIG_MAILBOX is not set # CONFIG_IOMMU_SUPPORT is not set # # Remoteproc drivers # # CONFIG_REMOTEPROC is not set # # Rpmsg drivers # # CONFIG_RPMSG_VIRTIO is not set # CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers # CONFIG_ASR_DRIVERS=y CONFIG_ASR_DEBUG=y CONFIG_ASR_CORESIGHT=y CONFIG_ASR_RAMDUMP=y CONFIG_ASR_VDSP=y # CONFIG_AQUILA_DEBUGFS is not set # CONFIG_ASR_CLK_DCSTAT is not set # CONFIG_ASR_TIMER_TEST is not set # CONFIG_ASR_VOL_DCSTAT is not set CONFIG_ASR_HWREG=y CONFIG_HWREG_SEC=y CONFIG_ASR_AUDIO=y # CONFIG_ASR_FPGA is not set # CONFIG_ASR_VDK is not set # CONFIG_ASR_ZEBU is not set CONFIG_ASR_CHIP=y # # Amlogic SoC drivers # # # Broadcom SoC drivers # # CONFIG_SOC_BRCMSTB is not set # # NXP/Freescale QorIQ SoC drivers # # # i.MX SoC drivers # # # Qualcomm SoC drivers # # CONFIG_SOC_TI is not set # # Xilinx SoC drivers # # CONFIG_XILINX_VCU is not set CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set # CONFIG_DEVFREQ_GOV_POWERSAVE is not set # CONFIG_DEVFREQ_GOV_USERSPACE is not set # CONFIG_DEVFREQ_GOV_PASSIVE is not set # # DEVFREQ Drivers # CONFIG_ASR_DDR_FC=y # CONFIG_PM_DEVFREQ_EVENT is not set CONFIG_EXTCON=y # # Extcon Device Drivers # # CONFIG_EXTCON_ADC_JACK is not set # CONFIG_EXTCON_GPIO is not set # CONFIG_EXTCON_MAX3355 is not set # CONFIG_EXTCON_RT8973A is not set # CONFIG_EXTCON_SM5502 is not set CONFIG_EXTCON_USB_ASRCI=y # CONFIG_EXTCON_USB_GPIO is not set # CONFIG_MEMORY is not set CONFIG_IIO=y # CONFIG_IIO_BUFFER is not set # CONFIG_IIO_CONFIGFS is not set # CONFIG_IIO_TRIGGER is not set # CONFIG_IIO_SW_DEVICE is not set # CONFIG_IIO_SW_TRIGGER is not set # # Accelerometers # # CONFIG_ADIS16201 is not set # CONFIG_ADIS16209 is not set # CONFIG_ADXL345_I2C is not set # CONFIG_ADXL345_SPI is not set # CONFIG_BMA180 is not set # CONFIG_BMA220 is not set # CONFIG_BMC150_ACCEL is not set # CONFIG_DA280 is not set # CONFIG_DA311 is not set # CONFIG_DMARD06 is not set # CONFIG_DMARD09 is not set # CONFIG_DMARD10 is not set # CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set # CONFIG_IIO_ST_ACCEL_3AXIS is not set # CONFIG_KXSD9 is not set # CONFIG_KXCJK1013 is not set # CONFIG_MC3230 is not set # CONFIG_MMA7455_I2C is not set # CONFIG_MMA7455_SPI is not set # CONFIG_MMA7660 is not set # CONFIG_MMA8452 is not set # CONFIG_MMA9551 is not set # CONFIG_MMA9553 is not set # CONFIG_MXC4005 is not set # CONFIG_MXC6255 is not set # CONFIG_SCA3000 is not set # CONFIG_STK8312 is not set # CONFIG_STK8BA50 is not set # # Analog to digital converters # CONFIG_ASR_AUXADC=y # CONFIG_AD7266 is not set # CONFIG_AD7291 is not set # CONFIG_AD7298 is not set # CONFIG_AD7476 is not set # CONFIG_AD7766 is not set # CONFIG_AD7791 is not set # CONFIG_AD7793 is not set # CONFIG_AD7887 is not set # CONFIG_AD7923 is not set # CONFIG_AD799X is not set # CONFIG_CC10001_ADC is not set # CONFIG_ENVELOPE_DETECTOR is not set # CONFIG_HI8435 is not set # CONFIG_HX711 is not set # CONFIG_INA2XX_ADC is not set # CONFIG_LTC2471 is not set # CONFIG_LTC2485 is not set # CONFIG_LTC2497 is not set # CONFIG_MAX1027 is not set # CONFIG_MAX11100 is not set # CONFIG_MAX1118 is not set # CONFIG_MAX1363 is not set # CONFIG_MAX9611 is not set # CONFIG_MCP320X is not set # CONFIG_MCP3422 is not set # CONFIG_NAU7802 is not set # CONFIG_SD_ADC_MODULATOR is not set # CONFIG_TI_ADC081C is not set # CONFIG_TI_ADC0832 is not set # CONFIG_TI_ADC084S021 is not set # CONFIG_TI_ADC12138 is not set # CONFIG_TI_ADC108S102 is not set # CONFIG_TI_ADC128S052 is not set # CONFIG_TI_ADC161S626 is not set # CONFIG_TI_ADS1015 is not set # CONFIG_TI_ADS7950 is not set # CONFIG_TI_ADS8688 is not set # CONFIG_TI_TLC4541 is not set # CONFIG_VF610_ADC is not set # # Analog Front Ends # # CONFIG_IIO_RESCALE is not set # # Amplifiers # # CONFIG_AD8366 is not set # # Chemical Sensors # # CONFIG_ATLAS_PH_SENSOR is not set # CONFIG_BME680 is not set # CONFIG_CCS811 is not set # CONFIG_IAQCORE is not set # CONFIG_VZ89X is not set # # Hid Sensor IIO Common # # # SSP Sensor Common # # CONFIG_IIO_SSP_SENSORHUB is not set # # Counters # # # Digital to analog converters # # CONFIG_AD5064 is not set # CONFIG_AD5360 is not set # CONFIG_AD5380 is not set # CONFIG_AD5421 is not set # CONFIG_AD5446 is not set # CONFIG_AD5449 is not set # CONFIG_AD5592R is not set # CONFIG_AD5593R is not set # CONFIG_AD5504 is not set # CONFIG_AD5624R_SPI is not set # CONFIG_LTC2632 is not set # CONFIG_AD5686_SPI is not set # CONFIG_AD5696_I2C is not set # CONFIG_AD5755 is not set # CONFIG_AD5758 is not set # CONFIG_AD5761 is not set # CONFIG_AD5764 is not set # CONFIG_AD5791 is not set # CONFIG_AD7303 is not set # CONFIG_AD8801 is not set # CONFIG_DPOT_DAC is not set # CONFIG_DS4424 is not set # CONFIG_M62332 is not set # CONFIG_MAX517 is not set # CONFIG_MAX5821 is not set # CONFIG_MCP4725 is not set # CONFIG_MCP4922 is not set # CONFIG_TI_DAC082S085 is not set # CONFIG_TI_DAC5571 is not set # CONFIG_VF610_DAC is not set # # IIO dummy driver # # # Frequency Synthesizers DDS/PLL # # # Clock Generator/Distribution # # CONFIG_AD9523 is not set # # Phase-Locked Loop (PLL) frequency synthesizers # # CONFIG_ADF4350 is not set # # Digital gyroscope sensors # # CONFIG_ADIS16080 is not set # CONFIG_ADIS16130 is not set # CONFIG_ADIS16136 is not set # CONFIG_ADIS16260 is not set # CONFIG_ADXRS450 is not set # CONFIG_BMG160 is not set # CONFIG_MPU3050_I2C is not set # CONFIG_IIO_ST_GYRO_3AXIS is not set # CONFIG_ITG3200 is not set # # Health Sensors # # # Heart Rate Monitors # # CONFIG_AFE4403 is not set # CONFIG_AFE4404 is not set # CONFIG_MAX30100 is not set # CONFIG_MAX30102 is not set # # Humidity sensors # # CONFIG_AM2315 is not set # CONFIG_DHT11 is not set # CONFIG_HDC100X is not set # CONFIG_HTS221 is not set # CONFIG_HTU21 is not set # CONFIG_SI7005 is not set # CONFIG_SI7020 is not set # # Inertial measurement units # # CONFIG_ADIS16400 is not set # CONFIG_ADIS16480 is not set # CONFIG_BMI160_I2C is not set # CONFIG_BMI160_SPI is not set # CONFIG_KMX61 is not set # CONFIG_INV_MPU6050_I2C is not set # CONFIG_INV_MPU6050_SPI is not set # CONFIG_IIO_ST_LSM6DSX is not set # # Light sensors # # CONFIG_ADJD_S311 is not set # CONFIG_AL3320A is not set # CONFIG_APDS9300 is not set # CONFIG_APDS9960 is not set # CONFIG_BH1750 is not set # CONFIG_BH1780 is not set # CONFIG_CM32181 is not set # CONFIG_CM3232 is not set # CONFIG_CM3323 is not set # CONFIG_CM3605 is not set # CONFIG_CM36651 is not set # CONFIG_GP2AP020A00F is not set # CONFIG_SENSORS_ISL29018 is not set # CONFIG_SENSORS_ISL29028 is not set # CONFIG_ISL29125 is not set # CONFIG_JSA1212 is not set # CONFIG_RPR0521 is not set # CONFIG_LTR501 is not set # CONFIG_LV0104CS is not set # CONFIG_MAX44000 is not set # CONFIG_OPT3001 is not set # CONFIG_PA12203001 is not set # CONFIG_SI1133 is not set # CONFIG_SI1145 is not set # CONFIG_STK3310 is not set # CONFIG_ST_UVIS25 is not set # CONFIG_TCS3414 is not set # CONFIG_TCS3472 is not set # CONFIG_SENSORS_TSL2563 is not set # CONFIG_TSL2583 is not set # CONFIG_TSL2772 is not set # CONFIG_TSL4531 is not set # CONFIG_US5182D is not set # CONFIG_VCNL4000 is not set # CONFIG_VEML6070 is not set # CONFIG_VL6180 is not set # CONFIG_ZOPT2201 is not set # # Magnetometer sensors # # CONFIG_AK8974 is not set # CONFIG_AK8975 is not set # CONFIG_AK09911 is not set # CONFIG_BMC150_MAGN_I2C is not set # CONFIG_BMC150_MAGN_SPI is not set # CONFIG_MAG3110 is not set # CONFIG_MMC35240 is not set # CONFIG_IIO_ST_MAGN_3AXIS is not set # CONFIG_SENSORS_HMC5843_I2C is not set # CONFIG_SENSORS_HMC5843_SPI is not set # # Multiplexers # # CONFIG_IIO_MUX is not set # # Inclinometer sensors # # # Digital potentiometers # # CONFIG_AD5272 is not set # CONFIG_DS1803 is not set # CONFIG_MAX5481 is not set # CONFIG_MAX5487 is not set # CONFIG_MCP4018 is not set # CONFIG_MCP4131 is not set # CONFIG_MCP4531 is not set # CONFIG_TPL0102 is not set # # Digital potentiostats # # CONFIG_LMP91000 is not set # # Pressure sensors # # CONFIG_ABP060MG is not set # CONFIG_BMP280 is not set # CONFIG_HP03 is not set # CONFIG_MPL115_I2C is not set # CONFIG_MPL115_SPI is not set # CONFIG_MPL3115 is not set # CONFIG_MS5611 is not set # CONFIG_MS5637 is not set # CONFIG_IIO_ST_PRESS is not set # CONFIG_T5403 is not set # CONFIG_HP206C is not set # CONFIG_ZPA2326 is not set # # Lightning sensors # # CONFIG_AS3935 is not set # # Proximity and distance sensors # # CONFIG_ISL29501 is not set # CONFIG_LIDAR_LITE_V2 is not set # CONFIG_RFD77402 is not set # CONFIG_SRF04 is not set # CONFIG_SX9500 is not set # CONFIG_SRF08 is not set # # Resolver to digital converters # # CONFIG_AD2S1200 is not set # # Temperature sensors # # CONFIG_MAXIM_THERMOCOUPLE is not set # CONFIG_MLX90614 is not set # CONFIG_MLX90632 is not set # CONFIG_TMP006 is not set # CONFIG_TMP007 is not set # CONFIG_TSYS01 is not set # CONFIG_TSYS02D is not set CONFIG_PWM=y CONFIG_PWM_SYSFS=y # CONFIG_PWM_FSL_FTM is not set # CONFIG_PWM_PCA9685 is not set CONFIG_PWM_PXA=y # # IRQ chip support # CONFIG_IRQCHIP=y CONFIG_ARM_GIC=y CONFIG_ARM_GIC_MAX_NR=1 # CONFIG_ASR_ICU is not set # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # CONFIG_FMC is not set # # PHY Subsystem # # CONFIG_GENERIC_PHY is not set # CONFIG_BCM_KONA_USB2_PHY is not set # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set # CONFIG_PHY_CPCAP_USB is not set # CONFIG_PHY_MAPPHONE_MDM6600 is not set # CONFIG_POWERCAP is not set # CONFIG_MCB is not set # # Performance monitor support # # CONFIG_ARM_CCI_PMU is not set # CONFIG_ARM_CCN is not set CONFIG_ARM_PMU=y # CONFIG_RAS is not set # # Android # # CONFIG_ANDROID is not set # CONFIG_DAX is not set CONFIG_NVMEM=y # # HW tracing support # # CONFIG_STM is not set # CONFIG_INTEL_TH is not set # CONFIG_FPGA is not set # CONFIG_FSI is not set CONFIG_TEE=y # # TEE drivers # CONFIG_OPTEE=y CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1 CONFIG_ASR_OPTEE_HW_SHARE=y CONFIG_ASR_OPTEE_VIRTUAL_UART=y CONFIG_ASR_CHIP_ID=y CONFIG_ASR_OPTEE_LOG_LEVEL=y CONFIG_PM_OPP=y # CONFIG_SIOX is not set CONFIG_G2D=y # CONFIG_SLIMBUS is not set CONFIG_VGS=y # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_FS_IOMAP=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_ENCRYPTION is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set # CONFIG_F2FS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y # CONFIG_EXPORTFS_BLOCK_OPS is not set CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_AUTOFS_FS is not set # CONFIG_FUSE_FS is not set # CONFIG_OVERLAY_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_FAT_DEFAULT_UTF8 is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y # CONFIG_PROC_CHILDREN is not set CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_TMPFS_XATTR is not set CONFIG_MEMFD_CREATE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ORANGEFS_FS is not set # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_YAFFS_FS=y CONFIG_YAFFS_YAFFS1=y # CONFIG_YAFFS_9BYTE_TAGS is not set # CONFIG_YAFFS_DOES_ECC is not set CONFIG_YAFFS_YAFFS2=y CONFIG_YAFFS_AUTO_YAFFS2=y CONFIG_YAFFS_DISABLE_TAGS_ECC=y # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set # CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set # CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set # CONFIG_YAFFS_DISABLE_BACKGROUND is not set # CONFIG_YAFFS_DISABLE_BAD_BLOCK_MARKING is not set CONFIG_YAFFS_XATTR=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_PSTORE=y CONFIG_PSTORE_DEFLATE_COMPRESS=y # CONFIG_PSTORE_LZO_COMPRESS is not set # CONFIG_PSTORE_LZ4_COMPRESS is not set # CONFIG_PSTORE_LZ4HC_COMPRESS is not set # CONFIG_PSTORE_842_COMPRESS is not set # CONFIG_PSTORE_ZSTD_COMPRESS is not set CONFIG_PSTORE_COMPRESS=y CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" CONFIG_PSTORE_CONSOLE=y # CONFIG_PSTORE_PMSG is not set # CONFIG_PSTORE_FTRACE is not set CONFIG_PSTORE_RAM=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V2=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=y # CONFIG_NFS_V4_2 is not set CONFIG_PNFS_FILE_LAYOUT=y CONFIG_PNFS_FLEXFILE_LAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y # CONFIG_NFSD is not set CONFIG_GRACE_PERIOD=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_BACKCHANNEL=y # CONFIG_SUNRPC_DEBUG is not set # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set CONFIG_NLS_CODEPAGE_936=y CONFIG_NLS_CODEPAGE_950=y # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Security options # CONFIG_KEYS=y # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_BIG_KEYS is not set # CONFIG_ENCRYPTED_KEYS is not set # CONFIG_KEY_DH_OPERATIONS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y # CONFIG_HARDENED_USERCOPY is not set # CONFIG_FORTIFY_SOURCE is not set # CONFIG_STATIC_USERMODEHELPER is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_RSA=y # CONFIG_CRYPTO_DH is not set # CONFIG_CRYPTO_ECDH is not set CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_MCRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CHACHA20POLY1305 is not set # CONFIG_CRYPTO_AEGIS128 is not set # CONFIG_CRYPTO_AEGIS128L is not set # CONFIG_CRYPTO_AEGIS256 is not set # CONFIG_CRYPTO_MORUS640 is not set # CONFIG_CRYPTO_MORUS1280 is not set # CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_ECHAINIV=y # # Block modes # # CONFIG_CRYPTO_CBC is not set # CONFIG_CRYPTO_CFB is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_KEYWRAP is not set # # Hash modes # # CONFIG_CRYPTO_CMAC is not set CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32 is not set # CONFIG_CRYPTO_CRCT10DIF is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_POLY1305 is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_SHA3 is not set # CONFIG_CRYPTO_SM3 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_CHACHA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SM4 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_842 is not set # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set # CONFIG_CRYPTO_ZSTD is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_DRBG_HMAC=y # CONFIG_CRYPTO_DRBG_HASH is not set CONFIG_CRYPTO_DRBG=y CONFIG_CRYPTO_JITTERENTROPY=y # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_USER_API_RNG is not set # CONFIG_CRYPTO_USER_API_AEAD is not set CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_CCREE is not set CONFIG_CRYPTO_DEV_ASR_CIPHER=y # CONFIG_CRYPTO_DEV_ASR_CIPHER_HASH_TC is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y CONFIG_PKCS7_MESSAGE_PARSER=y # CONFIG_PKCS7_TEST_KEY is not set # CONFIG_SIGNED_PE_FILE_VERIFICATION is not set # # Certificates for signature checking # CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set # CONFIG_SECONDARY_TRUSTED_KEYRING is not set # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_HAVE_ARCH_BITREVERSE=y CONFIG_RATIONAL=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC64 is not set # CONFIG_CRC4 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set # CONFIG_CRC8 is not set # CONFIG_RANDOM32_SELFTEST is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set # CONFIG_XZ_DEC_IA64 is not set CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y # CONFIG_XZ_DEC_SPARC is not set CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_REED_SOLOMON=y CONFIG_REED_SOLOMON_ENC8=y CONFIG_REED_SOLOMON_DEC8=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SGL_ALLOC=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y CONFIG_CLZ_TAB=y # CONFIG_CORDIC is not set # CONFIG_DDR is not set # CONFIG_IRQ_POLL is not set CONFIG_MPILIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_SG_POOL=y CONFIG_ARCH_HAS_SG_CHAIN=y CONFIG_SBITMAP=y # CONFIG_STRING_SELFTEST is not set # # Kernel hacking # # # printk and dmesg options # CONFIG_PRINTK_COMM=y # CONFIG_PRINTK_CPU_ID is not set CONFIG_PRINTK_PID=y CONFIG_PRINTK_TIME=y CONFIG_PRINTK_NC=y # CONFIG_PRINTK_MUTE is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_DYNAMIC_DEBUG is not set # # Compile-time checks and compiler options # CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set # CONFIG_DEBUG_INFO_SPLIT is not set # CONFIG_DEBUG_INFO_DWARF4 is not set # CONFIG_GDB_SCRIPTS is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_READABLE_ASM is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_PAGE_OWNER is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_SECTION_MISMATCH_WARN_ONLY=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 CONFIG_MAGIC_SYSRQ_SERIAL=y CONFIG_IPIPE_DEBUG=y CONFIG_IPIPE_DEBUG_CONTEXT=y CONFIG_IPIPE_DEBUG_INTERNAL=y CONFIG_HAVE_IPIPE_TRACER_SUPPORT=y # CONFIG_IPIPE_TRACE is not set CONFIG_DEBUG_KERNEL=y # # Memory Debugging # # CONFIG_PAGE_EXTENSION is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_PAGE_POISONING is not set # CONFIG_DEBUG_PAGE_REF is not set # CONFIG_DEBUG_RODATA_TEST is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_DEBUG_HIGHMEM is not set CONFIG_ARCH_HAS_KCOV=y CONFIG_CC_HAS_SANCOV_TRACE_PC=y # CONFIG_KCOV is not set # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 CONFIG_HARDLOCKUP_DETECTOR_OTHER_CPU=y # CONFIG_DETECT_HUNG_TASK is not set # CONFIG_WQ_WATCHDOG is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_PANIC_TIMEOUT=5 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_SCHED_STACK_END_CHECK is not set # CONFIG_DEBUG_TIMEKEEPING is not set CONFIG_DEBUG_PREEMPT=y # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_LOCK_DEBUGGING_SUPPORT=y # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_LOCK_TORTURE_TEST is not set # CONFIG_WW_MUTEX_SELFTEST is not set CONFIG_STACKTRACE=y # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PI_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_RCU_PERF_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 # CONFIG_RCU_TRACE is not set # CONFIG_RCU_EQS_DEBUG is not set # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y # CONFIG_FUNCTION_GRAPH_TRACER is not set # CONFIG_PREEMPTIRQ_EVENTS is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_HWLAT_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_TRACER_SNAPSHOT is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_KPROBE_EVENTS=y CONFIG_UPROBE_EVENTS=y CONFIG_PROBE_EVENTS=y # CONFIG_FUNCTION_PROFILER is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_TRACEPOINT_BENCHMARK is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_PREEMPTIRQ_DELAY_TEST is not set # CONFIG_TRACE_EVAL_MAP_FILE is not set CONFIG_TRACING_EVENTS_GPIO=y # CONFIG_DMA_API_DEBUG is not set CONFIG_RUNTIME_TESTING_MENU=y # CONFIG_LKDTM is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_TEST_SORT is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_RBTREE_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_PERCPU_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_TEST_HEXDUMP is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_TEST_PRINTF is not set # CONFIG_TEST_BITMAP is not set # CONFIG_TEST_BITFIELD is not set # CONFIG_TEST_UUID is not set # CONFIG_TEST_OVERFLOW is not set # CONFIG_TEST_RHASHTABLE is not set # CONFIG_TEST_HASH is not set # CONFIG_TEST_IDA is not set # CONFIG_TEST_LKM is not set # CONFIG_TEST_USER_COPY is not set # CONFIG_TEST_BPF is not set # CONFIG_FIND_BIT_BENCHMARK is not set # CONFIG_TEST_FIRMWARE is not set # CONFIG_TEST_SYSCTL is not set # CONFIG_TEST_UDELAY is not set # CONFIG_TEST_STATIC_KEYS is not set # CONFIG_TEST_KMOD is not set # CONFIG_MEMTEST is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_UBSAN is not set CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y # CONFIG_STRICT_DEVMEM is not set # CONFIG_ARM_PTDUMP_DEBUGFS is not set # CONFIG_DEBUG_WX is not set CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set # CONFIG_DEBUG_SEMIHOSTING is not set CONFIG_DEBUG_LL_UART_8250=y # CONFIG_DEBUG_LL_UART_PL01X is not set CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" CONFIG_DEBUG_UART_PHYS=0x01017000 CONFIG_DEBUG_UART_VIRT=0xf4017000 CONFIG_DEBUG_UART_8250_SHIFT=2 # CONFIG_DEBUG_UART_8250_WORD is not set # CONFIG_DEBUG_UART_8250_PALMCHIP is not set # CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set # CONFIG_DEBUG_UNCOMPRESS is not set CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" CONFIG_EARLY_PRINTK=y # CONFIG_ARM_KPROBES_TEST is not set # CONFIG_PID_IN_CONTEXTIDR is not set # CONFIG_CORESIGHT is not set 2021-05-10 14:49 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: > On 10.05.21 03:56, Fangsuo Wu via Xenomai wrote: >> Hi, I met below errors when running xeno-test in my board: >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> *sh-4.4# ./xeno-testStarted child 209: /bin/sh >> /usr/xenomai/bin/xeno-test-run-wrapper ./xeno-test++ echo 0++ >> testdir=/usr/xenomai/bin++ /usr/xenomai/bin/smokey --run >> random_alloc_rounds=64 pattern_check_rounds=64arith OKbufp skipped (no >> kernel support)cpu_affinity skipped (no kernel support)fpu_stress OKiddp >> skipped (no kernel support)leaks OKmemory_coreheap OKmemory_heapmem >> OKmemory_tlsf OKnet_packet_dgram skipped (no kernel >> support)net_packet_raw >> skipped (no kernel support)net_udp skipped (no kernel support)posix_clock >> OKFAILED autoinit_simple_conddestroy cond_destroy: returned -22 instead >> of >> 0 - Invalid argumentchild 209 returned: exited with status 1* >> >> How can I solve the cond_destroy error and what kernel configurations do >> I >> need for "no kernel support" items? Can someone give some hints? Thanks! >> > > Please use an email client that is capable of sending unmangled > plaintext emails to prevent such things as above. > > Then we need more information about your board, the revision of Xenomai > used, how you built etc. > > Jan > > -- > Siemens AG, T RDA IOT > Corporate Competence Center Embedded Linux > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-10 7:20 ` Fangsuo Wu @ 2021-05-10 7:35 ` Jan Kiszka 2021-05-10 9:28 ` Fangsuo Wu 0 siblings, 1 reply; 10+ messages in thread From: Jan Kiszka @ 2021-05-10 7:35 UTC (permalink / raw) To: Fangsuo Wu; +Cc: xenomai On 10.05.21 09:20, Fangsuo Wu wrote: > Jan, > Thanks for your reply. The environment I used is listed below. BTW, I > can run latency test successfully. > > 1. The revision of Xenomai: xenomai-3.1.tar.bz2 > 2. Soc: dual ARM cortex A7 > 3. How I built application libraries: > ./configure CFLAGS="-march=armv7-a -mfpu=vfp3" > LDFLAGS="-march=armv7-a -mfpu=vfp3" --build=i686-pc-linux-gnu > --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp > --enable-pshared > make DESTDIR=/home/data/nfs_test/ install > 4. The kernel I used is 4.19 so I applied > ipipe-core-4.19.55-arm-5.patch, and manually enabled > CONFIG_IPIPE_ARM_KUSER_TSC. The full config file is: > OK - our qemu-armhf target [1] is multicore A7 as well. Do you see the problem in QEMU, too? Do any of the extra CFLAGS or LDFLAGS you pass play a role here? We compile in CI only with "--enable-smp --enable-lazy-setsched --enable-debug=symbols" - maybe "--enable-pshared"... Jan [1] https://source.denx.de/Xenomai/xenomai-images/-/jobs/265962#L387 -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-10 7:35 ` Jan Kiszka @ 2021-05-10 9:28 ` Fangsuo Wu 2021-05-10 9:40 ` Fangsuo Wu 0 siblings, 1 reply; 10+ messages in thread From: Fangsuo Wu @ 2021-05-10 9:28 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai Jan, I removed the CFLAGS and LDFLAGS, with configure command: ./configure --build=i686-pc-linux-gnu --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp --enable-lazy-setsched --enable-debug=symbols But the issue still remains. I changed the failed test case as below, the issue still exists. 226 static void autoinit_simple_conddestroy(void) 227 { 228 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; 229 #if 0 230 >-------pthread_cond_t cond2 = PTHREAD_COND_INITIALIZER; 231 >-------unsigned int invalmagic = ~0x86860505; // ~COBALT_COND_MAGIC 232 233 >-------memcpy((char *)&cond2 + sizeof(cond2) - sizeof(invalmagic), 234 >------->-------&invalmagic, sizeof(invalmagic)); 235 236 >-------smokey_trace("%s", __func__); 237 #endif 238 >-------check("cond_destroy", cond_destroy(&cond), 0); 239 //>-----check("cond_destroy invalid", cond_destroy(&cond2), -EINVAL); 240 } I'll try QEMU later to see if the issue also exits in QEMU. BTW, I saw some below warnings in compiling, do they have any relationship with the issue? /bin/bash ../../../libtool --mode=install /usr/bin/install -c smokey_net_server '/home/data/nfs_test//usr/xenomai/bin' libtool: warning: '../../../lib/cobalt/libcobalt.la' has not been installed in '/usr/xenomai/lib' libtool: warning: '../../../lib/cobalt/libmodechk.la' has not been installed in '/usr/xenomai/lib' 2021-05-10 15:35 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: > On 10.05.21 09:20, Fangsuo Wu wrote: >> Jan, >> Thanks for your reply. The environment I used is listed below. BTW, I >> can run latency test successfully. >> >> 1. The revision of Xenomai: xenomai-3.1.tar.bz2 >> 2. Soc: dual ARM cortex A7 >> 3. How I built application libraries: >> ./configure CFLAGS="-march=armv7-a -mfpu=vfp3" >> LDFLAGS="-march=armv7-a -mfpu=vfp3" --build=i686-pc-linux-gnu >> --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp >> --enable-pshared >> make DESTDIR=/home/data/nfs_test/ install >> 4. The kernel I used is 4.19 so I applied >> ipipe-core-4.19.55-arm-5.patch, and manually enabled >> CONFIG_IPIPE_ARM_KUSER_TSC. The full config file is: >> > > OK - our qemu-armhf target [1] is multicore A7 as well. Do you see the > problem in QEMU, too? Do any of the extra CFLAGS or LDFLAGS you pass > play a role here? We compile in CI only with "--enable-smp > --enable-lazy-setsched --enable-debug=symbols" - maybe > "--enable-pshared"... > > Jan > > [1] https://source.denx.de/Xenomai/xenomai-images/-/jobs/265962#L387 > > -- > Siemens AG, T RDA IOT > Corporate Competence Center Embedded Linux > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-10 9:28 ` Fangsuo Wu @ 2021-05-10 9:40 ` Fangsuo Wu 2021-05-11 10:37 ` Fangsuo Wu 0 siblings, 1 reply; 10+ messages in thread From: Fangsuo Wu @ 2021-05-10 9:40 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai BTW, I just wrote an application which is exactly the same with autoinit_simple_conddestroy. And it can run successfully in my board. 1 #include <stdio.h> 2 #include <pthread.h> 3 int main(void) 4 { 5 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; 6 >-------if(pthread_cond_destroy(&cond) == 0) 7 >------->-------printf("suc!\n"); 8 >-------else 9 >------->-------printf("err!\n"); 10 } sh-4.4# ./main suc! 2021-05-10 17:28 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: > Jan, > I removed the CFLAGS and LDFLAGS, with configure command: > > ./configure --build=i686-pc-linux-gnu --host=arm-linux-gnueabihf > --with-core=cobalt --enable-smp --enable-lazy-setsched > --enable-debug=symbols > > But the issue still remains. I changed the failed test case as below, > the issue still exists. > > 226 static void autoinit_simple_conddestroy(void) > 227 { > 228 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; > 229 #if 0 > 230 >-------pthread_cond_t cond2 = PTHREAD_COND_INITIALIZER; > 231 >-------unsigned int invalmagic = ~0x86860505; // ~COBALT_COND_MAGIC > 232 > 233 >-------memcpy((char *)&cond2 + sizeof(cond2) - sizeof(invalmagic), > 234 >------->-------&invalmagic, sizeof(invalmagic)); > 235 > 236 >-------smokey_trace("%s", __func__); > 237 #endif > 238 >-------check("cond_destroy", cond_destroy(&cond), 0); > 239 //>-----check("cond_destroy invalid", cond_destroy(&cond2), -EINVAL); > 240 } > > I'll try QEMU later to see if the issue also exits in QEMU. > > BTW, I saw some below warnings in compiling, do they have any > relationship with the issue? > /bin/bash ../../../libtool --mode=install /usr/bin/install -c > smokey_net_server '/home/data/nfs_test//usr/xenomai/bin' > libtool: warning: '../../../lib/cobalt/libcobalt.la' has not been > installed in '/usr/xenomai/lib' > libtool: warning: '../../../lib/cobalt/libmodechk.la' has not been > installed in '/usr/xenomai/lib' > > > > > 2021-05-10 15:35 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: >> On 10.05.21 09:20, Fangsuo Wu wrote: >>> Jan, >>> Thanks for your reply. The environment I used is listed below. BTW, I >>> can run latency test successfully. >>> >>> 1. The revision of Xenomai: xenomai-3.1.tar.bz2 >>> 2. Soc: dual ARM cortex A7 >>> 3. How I built application libraries: >>> ./configure CFLAGS="-march=armv7-a -mfpu=vfp3" >>> LDFLAGS="-march=armv7-a -mfpu=vfp3" --build=i686-pc-linux-gnu >>> --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp >>> --enable-pshared >>> make DESTDIR=/home/data/nfs_test/ install >>> 4. The kernel I used is 4.19 so I applied >>> ipipe-core-4.19.55-arm-5.patch, and manually enabled >>> CONFIG_IPIPE_ARM_KUSER_TSC. The full config file is: >>> >> >> OK - our qemu-armhf target [1] is multicore A7 as well. Do you see the >> problem in QEMU, too? Do any of the extra CFLAGS or LDFLAGS you pass >> play a role here? We compile in CI only with "--enable-smp >> --enable-lazy-setsched --enable-debug=symbols" - maybe >> "--enable-pshared"... >> >> Jan >> >> [1] https://source.denx.de/Xenomai/xenomai-images/-/jobs/265962#L387 >> >> -- >> Siemens AG, T RDA IOT >> Corporate Competence Center Embedded Linux >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-10 9:40 ` Fangsuo Wu @ 2021-05-11 10:37 ` Fangsuo Wu 2021-05-11 15:10 ` Jan Kiszka 0 siblings, 1 reply; 10+ messages in thread From: Fangsuo Wu @ 2021-05-11 10:37 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai Hi, the issue seems related to the gcc compiler I used（gcc-linaro-arm-linux-gnueabihf-4.9-2014.08_linux）. I added some log and found the failure was from below code, line 155: pthread_cond_destroy -> cobalt_cond_autoinit_type: 149 static int __attribute__((cold)) 150 >-------cobalt_cond_autoinit_type(const pthread_cond_t *cond) 151 { 152 >-------static const pthread_cond_t cond_initializer = 153 >------->-------PTHREAD_COND_INITIALIZER; 154 155 >-------return memcmp(cond, &cond_initializer, sizeof(cond_initializer)) == 0 ? 156 >------->-------0 : -1; //memcmp is not Zero 157 } I dumped the content of pthread_cond_t cond and cond_initializer. For the latter one, all bytes were 0, but for cond variable, only the first 44 bytes were 0, the last 4 bytes' value changed every time. I found the pthread_cond_t and PTHREAD_COND_INITIALIZER definitions in the GCC I used: #define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, 0, 0}} #define __SIZEOF_PTHREAD_COND_T 48 89 typedef union 90 { 91 struct 92 { 93 int __lock; 94 unsigned int __futex; 95 __extension__ unsigned long long int __total_seq; 96 __extension__ unsigned long long int __wakeup_seq; 97 __extension__ unsigned long long int __woken_seq; 98 void *__mutex; 99 unsigned int __nwaiters; 100 unsigned int __broadcast_seq; 101 } __data; 102 char __size[__SIZEOF_PTHREAD_COND_T]; 103 __extension__ long long int __align; 104 } pthread_cond_t; 105 The total size of pthread_cond_t.__size is 48. But PTHREAD_COND_INITIALIZER only initializes the first 44 bytes, thus the last 4 bytes' value becomes unpredictable. The issue was gone after I made the below change: 197 //#define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, 0, 0}} 198 #define PTHREAD_COND_INITIALIZER { .__size = {0}} 2021-05-10 17:40 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: > BTW, I just wrote an application which is exactly the same with > autoinit_simple_conddestroy. And it can run successfully in my board. > > 1 #include <stdio.h> > 2 #include <pthread.h> > 3 int main(void) > 4 { > 5 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; > 6 >-------if(pthread_cond_destroy(&cond) == 0) > 7 >------->-------printf("suc!\n"); > 8 >-------else > 9 >------->-------printf("err!\n"); > 10 } > > sh-4.4# ./main > suc! > > > 2021-05-10 17:28 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: >> Jan, >> I removed the CFLAGS and LDFLAGS, with configure command: >> >> ./configure --build=i686-pc-linux-gnu --host=arm-linux-gnueabihf >> --with-core=cobalt --enable-smp --enable-lazy-setsched >> --enable-debug=symbols >> >> But the issue still remains. I changed the failed test case as below, >> the issue still exists. >> >> 226 static void autoinit_simple_conddestroy(void) >> 227 { >> 228 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; >> 229 #if 0 >> 230 >-------pthread_cond_t cond2 = PTHREAD_COND_INITIALIZER; >> 231 >-------unsigned int invalmagic = ~0x86860505; // ~COBALT_COND_MAGIC >> 232 >> 233 >-------memcpy((char *)&cond2 + sizeof(cond2) - sizeof(invalmagic), >> 234 >------->-------&invalmagic, sizeof(invalmagic)); >> 235 >> 236 >-------smokey_trace("%s", __func__); >> 237 #endif >> 238 >-------check("cond_destroy", cond_destroy(&cond), 0); >> 239 //>-----check("cond_destroy invalid", cond_destroy(&cond2), -EINVAL); >> 240 } >> >> I'll try QEMU later to see if the issue also exits in QEMU. >> >> BTW, I saw some below warnings in compiling, do they have any >> relationship with the issue? >> /bin/bash ../../../libtool --mode=install /usr/bin/install -c >> smokey_net_server '/home/data/nfs_test//usr/xenomai/bin' >> libtool: warning: '../../../lib/cobalt/libcobalt.la' has not been >> installed in '/usr/xenomai/lib' >> libtool: warning: '../../../lib/cobalt/libmodechk.la' has not been >> installed in '/usr/xenomai/lib' >> >> >> >> >> 2021-05-10 15:35 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: >>> On 10.05.21 09:20, Fangsuo Wu wrote: >>>> Jan, >>>> Thanks for your reply. The environment I used is listed below. BTW, I >>>> can run latency test successfully. >>>> >>>> 1. The revision of Xenomai: xenomai-3.1.tar.bz2 >>>> 2. Soc: dual ARM cortex A7 >>>> 3. How I built application libraries: >>>> ./configure CFLAGS="-march=armv7-a -mfpu=vfp3" >>>> LDFLAGS="-march=armv7-a -mfpu=vfp3" --build=i686-pc-linux-gnu >>>> --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp >>>> --enable-pshared >>>> make DESTDIR=/home/data/nfs_test/ install >>>> 4. The kernel I used is 4.19 so I applied >>>> ipipe-core-4.19.55-arm-5.patch, and manually enabled >>>> CONFIG_IPIPE_ARM_KUSER_TSC. The full config file is: >>>> >>> >>> OK - our qemu-armhf target [1] is multicore A7 as well. Do you see the >>> problem in QEMU, too? Do any of the extra CFLAGS or LDFLAGS you pass >>> play a role here? We compile in CI only with "--enable-smp >>> --enable-lazy-setsched --enable-debug=symbols" - maybe >>> "--enable-pshared"... >>> >>> Jan >>> >>> [1] https://source.denx.de/Xenomai/xenomai-images/-/jobs/265962#L387 >>> >>> -- >>> Siemens AG, T RDA IOT >>> Corporate Competence Center Embedded Linux >>> >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-11 10:37 ` Fangsuo Wu @ 2021-05-11 15:10 ` Jan Kiszka 2021-05-12 2:08 ` Fangsuo Wu 0 siblings, 1 reply; 10+ messages in thread From: Jan Kiszka @ 2021-05-11 15:10 UTC (permalink / raw) To: Fangsuo Wu; +Cc: xenomai On 11.05.21 12:37, Fangsuo Wu wrote: > Hi, the issue seems related to the gcc compiler I > used（gcc-linaro-arm-linux-gnueabihf-4.9-2014.08_linux）. Huh, that is... well "matured". > > I added some log and found the failure was from below code, line 155: > pthread_cond_destroy > -> cobalt_cond_autoinit_type: > 149 static int __attribute__((cold)) > 150 >-------cobalt_cond_autoinit_type(const pthread_cond_t *cond) > 151 { > 152 >-------static const pthread_cond_t cond_initializer = > 153 >------->-------PTHREAD_COND_INITIALIZER; > 154 > 155 >-------return memcmp(cond, &cond_initializer, > sizeof(cond_initializer)) == 0 ? > 156 >------->-------0 : -1; //memcmp is not Zero > 157 } > > I dumped the content of pthread_cond_t cond and cond_initializer. For > the latter one, all bytes were 0, but for cond variable, only the > first 44 bytes were 0, the last 4 bytes' value changed every time. > > I found the pthread_cond_t and PTHREAD_COND_INITIALIZER definitions > in the GCC I used: > > #define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, 0, 0}} > #define __SIZEOF_PTHREAD_COND_T 48 > > 89 typedef union > 90 { > 91 struct > 92 { > 93 int __lock; > 94 unsigned int __futex; > 95 __extension__ unsigned long long int __total_seq; > 96 __extension__ unsigned long long int __wakeup_seq; > 97 __extension__ unsigned long long int __woken_seq; > 98 void *__mutex; > 99 unsigned int __nwaiters; > 100 unsigned int __broadcast_seq; > 101 } __data; > 102 char __size[__SIZEOF_PTHREAD_COND_T]; > 103 __extension__ long long int __align; > 104 } pthread_cond_t; > 105 > > The total size of pthread_cond_t.__size is 48. But > PTHREAD_COND_INITIALIZER only initializes the first 44 bytes, thus the > last 4 bytes' value becomes unpredictable. The issue was gone after I > made the below change: > > 197 //#define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, > 0, 0}} > 198 #define PTHREAD_COND_INITIALIZER { .__size = {0}} > Err, those types should rather come from glibc, not [lib]gcc. Which glibc version are you using? Jan > > > 2021-05-10 17:40 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: >> BTW, I just wrote an application which is exactly the same with >> autoinit_simple_conddestroy. And it can run successfully in my board. >> >> 1 #include <stdio.h> >> 2 #include <pthread.h> >> 3 int main(void) >> 4 { >> 5 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; >> 6 >-------if(pthread_cond_destroy(&cond) == 0) >> 7 >------->-------printf("suc!\n"); >> 8 >-------else >> 9 >------->-------printf("err!\n"); >> 10 } >> >> sh-4.4# ./main >> suc! >> >> >> 2021-05-10 17:28 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: >>> Jan, >>> I removed the CFLAGS and LDFLAGS, with configure command: >>> >>> ./configure --build=i686-pc-linux-gnu --host=arm-linux-gnueabihf >>> --with-core=cobalt --enable-smp --enable-lazy-setsched >>> --enable-debug=symbols >>> >>> But the issue still remains. I changed the failed test case as below, >>> the issue still exists. >>> >>> 226 static void autoinit_simple_conddestroy(void) >>> 227 { >>> 228 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; >>> 229 #if 0 >>> 230 >-------pthread_cond_t cond2 = PTHREAD_COND_INITIALIZER; >>> 231 >-------unsigned int invalmagic = ~0x86860505; // ~COBALT_COND_MAGIC >>> 232 >>> 233 >-------memcpy((char *)&cond2 + sizeof(cond2) - sizeof(invalmagic), >>> 234 >------->-------&invalmagic, sizeof(invalmagic)); >>> 235 >>> 236 >-------smokey_trace("%s", __func__); >>> 237 #endif >>> 238 >-------check("cond_destroy", cond_destroy(&cond), 0); >>> 239 //>-----check("cond_destroy invalid", cond_destroy(&cond2), -EINVAL); >>> 240 } >>> >>> I'll try QEMU later to see if the issue also exits in QEMU. >>> >>> BTW, I saw some below warnings in compiling, do they have any >>> relationship with the issue? >>> /bin/bash ../../../libtool --mode=install /usr/bin/install -c >>> smokey_net_server '/home/data/nfs_test//usr/xenomai/bin' >>> libtool: warning: '../../../lib/cobalt/libcobalt.la' has not been >>> installed in '/usr/xenomai/lib' >>> libtool: warning: '../../../lib/cobalt/libmodechk.la' has not been >>> installed in '/usr/xenomai/lib' >>> >>> >>> >>> >>> 2021-05-10 15:35 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: >>>> On 10.05.21 09:20, Fangsuo Wu wrote: >>>>> Jan, >>>>> Thanks for your reply. The environment I used is listed below. BTW, I >>>>> can run latency test successfully. >>>>> >>>>> 1. The revision of Xenomai: xenomai-3.1.tar.bz2 >>>>> 2. Soc: dual ARM cortex A7 >>>>> 3. How I built application libraries: >>>>> ./configure CFLAGS="-march=armv7-a -mfpu=vfp3" >>>>> LDFLAGS="-march=armv7-a -mfpu=vfp3" --build=i686-pc-linux-gnu >>>>> --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp >>>>> --enable-pshared >>>>> make DESTDIR=/home/data/nfs_test/ install >>>>> 4. The kernel I used is 4.19 so I applied >>>>> ipipe-core-4.19.55-arm-5.patch, and manually enabled >>>>> CONFIG_IPIPE_ARM_KUSER_TSC. The full config file is: >>>>> >>>> >>>> OK - our qemu-armhf target [1] is multicore A7 as well. Do you see the >>>> problem in QEMU, too? Do any of the extra CFLAGS or LDFLAGS you pass >>>> play a role here? We compile in CI only with "--enable-smp >>>> --enable-lazy-setsched --enable-debug=symbols" - maybe >>>> "--enable-pshared"... >>>> >>>> Jan >>>> >>>> [1] https://source.denx.de/Xenomai/xenomai-images/-/jobs/265962#L387 >>>> >>>> -- >>>> Siemens AG, T RDA IOT >>>> Corporate Competence Center Embedded Linux >>>> >>> >> -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-11 15:10 ` Jan Kiszka @ 2021-05-12 2:08 ` Fangsuo Wu 2021-05-12 6:51 ` Jan Kiszka 0 siblings, 1 reply; 10+ messages in thread From: Fangsuo Wu @ 2021-05-12 2:08 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai yes, to be more accurate, the issue is found in the libc file under gcc-linaro-arm-linux-gnueabihf-4.9-2014.08_linux/arm-linux-gnueabihf/libc/usr/include/pthread.h. The glibc is accompanied with the gcc I downloaded from https://releases.linaro.org/archive/14.08/components/toolchain/binaries/. 2021-05-11 23:10 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: > On 11.05.21 12:37, Fangsuo Wu wrote: >> Hi, the issue seems related to the gcc compiler I >> used（gcc-linaro-arm-linux-gnueabihf-4.9-2014.08_linux）. > > Huh, that is... well "matured". > >> >> I added some log and found the failure was from below code, line 155: >> pthread_cond_destroy >> -> cobalt_cond_autoinit_type: >> 149 static int __attribute__((cold)) >> 150 >-------cobalt_cond_autoinit_type(const pthread_cond_t *cond) >> 151 { >> 152 >-------static const pthread_cond_t cond_initializer = >> 153 >------->-------PTHREAD_COND_INITIALIZER; >> 154 >> 155 >-------return memcmp(cond, &cond_initializer, >> sizeof(cond_initializer)) == 0 ? >> 156 >------->-------0 : -1; //memcmp is not Zero >> 157 } >> >> I dumped the content of pthread_cond_t cond and cond_initializer. For >> the latter one, all bytes were 0, but for cond variable, only the >> first 44 bytes were 0, the last 4 bytes' value changed every time. >> >> I found the pthread_cond_t and PTHREAD_COND_INITIALIZER definitions >> in the GCC I used: >> >> #define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, 0, 0}} >> #define __SIZEOF_PTHREAD_COND_T 48 >> >> 89 typedef union >> 90 { >> 91 struct >> 92 { >> 93 int __lock; >> 94 unsigned int __futex; >> 95 __extension__ unsigned long long int __total_seq; >> 96 __extension__ unsigned long long int __wakeup_seq; >> 97 __extension__ unsigned long long int __woken_seq; >> 98 void *__mutex; >> 99 unsigned int __nwaiters; >> 100 unsigned int __broadcast_seq; >> 101 } __data; >> 102 char __size[__SIZEOF_PTHREAD_COND_T]; >> 103 __extension__ long long int __align; >> 104 } pthread_cond_t; >> 105 >> >> The total size of pthread_cond_t.__size is 48. But >> PTHREAD_COND_INITIALIZER only initializes the first 44 bytes, thus the >> last 4 bytes' value becomes unpredictable. The issue was gone after I >> made the below change: >> >> 197 //#define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, >> 0, 0}} >> 198 #define PTHREAD_COND_INITIALIZER { .__size = {0}} >> > > Err, those types should rather come from glibc, not [lib]gcc. > > Which glibc version are you using? > > Jan > >> >> >> 2021-05-10 17:40 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: >>> BTW, I just wrote an application which is exactly the same with >>> autoinit_simple_conddestroy. And it can run successfully in my board. >>> >>> 1 #include <stdio.h> >>> 2 #include <pthread.h> >>> 3 int main(void) >>> 4 { >>> 5 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; >>> 6 >-------if(pthread_cond_destroy(&cond) == 0) >>> 7 >------->-------printf("suc!\n"); >>> 8 >-------else >>> 9 >------->-------printf("err!\n"); >>> 10 } >>> >>> sh-4.4# ./main >>> suc! >>> >>> >>> 2021-05-10 17:28 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: >>>> Jan, >>>> I removed the CFLAGS and LDFLAGS, with configure command: >>>> >>>> ./configure --build=i686-pc-linux-gnu --host=arm-linux-gnueabihf >>>> --with-core=cobalt --enable-smp --enable-lazy-setsched >>>> --enable-debug=symbols >>>> >>>> But the issue still remains. I changed the failed test case as below, >>>> the issue still exists. >>>> >>>> 226 static void autoinit_simple_conddestroy(void) >>>> 227 { >>>> 228 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; >>>> 229 #if 0 >>>> 230 >-------pthread_cond_t cond2 = PTHREAD_COND_INITIALIZER; >>>> 231 >-------unsigned int invalmagic = ~0x86860505; // >>>> ~COBALT_COND_MAGIC >>>> 232 >>>> 233 >-------memcpy((char *)&cond2 + sizeof(cond2) - sizeof(invalmagic), >>>> 234 >------->-------&invalmagic, sizeof(invalmagic)); >>>> 235 >>>> 236 >-------smokey_trace("%s", __func__); >>>> 237 #endif >>>> 238 >-------check("cond_destroy", cond_destroy(&cond), 0); >>>> 239 //>-----check("cond_destroy invalid", cond_destroy(&cond2), >>>> -EINVAL); >>>> 240 } >>>> >>>> I'll try QEMU later to see if the issue also exits in QEMU. >>>> >>>> BTW, I saw some below warnings in compiling, do they have any >>>> relationship with the issue? >>>> /bin/bash ../../../libtool --mode=install /usr/bin/install -c >>>> smokey_net_server '/home/data/nfs_test//usr/xenomai/bin' >>>> libtool: warning: '../../../lib/cobalt/libcobalt.la' has not been >>>> installed in '/usr/xenomai/lib' >>>> libtool: warning: '../../../lib/cobalt/libmodechk.la' has not been >>>> installed in '/usr/xenomai/lib' >>>> >>>> >>>> >>>> >>>> 2021-05-10 15:35 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: >>>>> On 10.05.21 09:20, Fangsuo Wu wrote: >>>>>> Jan, >>>>>> Thanks for your reply. The environment I used is listed below. BTW, I >>>>>> can run latency test successfully. >>>>>> >>>>>> 1. The revision of Xenomai: xenomai-3.1.tar.bz2 >>>>>> 2. Soc: dual ARM cortex A7 >>>>>> 3. How I built application libraries: >>>>>> ./configure CFLAGS="-march=armv7-a -mfpu=vfp3" >>>>>> LDFLAGS="-march=armv7-a -mfpu=vfp3" --build=i686-pc-linux-gnu >>>>>> --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp >>>>>> --enable-pshared >>>>>> make DESTDIR=/home/data/nfs_test/ install >>>>>> 4. The kernel I used is 4.19 so I applied >>>>>> ipipe-core-4.19.55-arm-5.patch, and manually enabled >>>>>> CONFIG_IPIPE_ARM_KUSER_TSC. The full config file is: >>>>>> >>>>> >>>>> OK - our qemu-armhf target [1] is multicore A7 as well. Do you see the >>>>> problem in QEMU, too? Do any of the extra CFLAGS or LDFLAGS you pass >>>>> play a role here? We compile in CI only with "--enable-smp >>>>> --enable-lazy-setsched --enable-debug=symbols" - maybe >>>>> "--enable-pshared"... >>>>> >>>>> Jan >>>>> >>>>> [1] https://source.denx.de/Xenomai/xenomai-images/-/jobs/265962#L387 >>>>> >>>>> -- >>>>> Siemens AG, T RDA IOT >>>>> Corporate Competence Center Embedded Linux >>>>> >>>> >>> > > -- > Siemens AG, T RDA IOT > Corporate Competence Center Embedded Linux > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xeno-test failed due to cond_destroy error 2021-05-12 2:08 ` Fangsuo Wu @ 2021-05-12 6:51 ` Jan Kiszka 0 siblings, 0 replies; 10+ messages in thread From: Jan Kiszka @ 2021-05-12 6:51 UTC (permalink / raw) To: Fangsuo Wu; +Cc: xenomai On 12.05.21 04:08, Fangsuo Wu wrote: > yes, to be more accurate, the issue is found in the libc file under > gcc-linaro-arm-linux-gnueabihf-4.9-2014.08_linux/arm-linux-gnueabihf/libc/usr/include/pthread.h. > > The glibc is accompanied with the gcc I downloaded from > https://releases.linaro.org/archive/14.08/components/toolchain/binaries/ > Sounds a lot like a toolchain bug to me: Even if you only partially initialize a struct, the remaining fields must be zeroed. Only if you do struct.field1 = 0, struct.field2 is undefined. Jan > 2021-05-11 23:10 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: >> On 11.05.21 12:37, Fangsuo Wu wrote: >>> Hi, the issue seems related to the gcc compiler I >>> used（gcc-linaro-arm-linux-gnueabihf-4.9-2014.08_linux）. >> >> Huh, that is... well "matured". >> >>> >>> I added some log and found the failure was from below code, line 155: >>> pthread_cond_destroy >>> -> cobalt_cond_autoinit_type: >>> 149 static int __attribute__((cold)) >>> 150 >-------cobalt_cond_autoinit_type(const pthread_cond_t *cond) >>> 151 { >>> 152 >-------static const pthread_cond_t cond_initializer = >>> 153 >------->-------PTHREAD_COND_INITIALIZER; >>> 154 >>> 155 >-------return memcmp(cond, &cond_initializer, >>> sizeof(cond_initializer)) == 0 ? >>> 156 >------->-------0 : -1; //memcmp is not Zero >>> 157 } >>> >>> I dumped the content of pthread_cond_t cond and cond_initializer. For >>> the latter one, all bytes were 0, but for cond variable, only the >>> first 44 bytes were 0, the last 4 bytes' value changed every time. >>> >>> I found the pthread_cond_t and PTHREAD_COND_INITIALIZER definitions >>> in the GCC I used: >>> >>> #define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, 0, 0}} >>> #define __SIZEOF_PTHREAD_COND_T 48 >>> >>> 89 typedef union >>> 90 { >>> 91 struct >>> 92 { >>> 93 int __lock; >>> 94 unsigned int __futex; >>> 95 __extension__ unsigned long long int __total_seq; >>> 96 __extension__ unsigned long long int __wakeup_seq; >>> 97 __extension__ unsigned long long int __woken_seq; >>> 98 void *__mutex; >>> 99 unsigned int __nwaiters; >>> 100 unsigned int __broadcast_seq; >>> 101 } __data; >>> 102 char __size[__SIZEOF_PTHREAD_COND_T]; >>> 103 __extension__ long long int __align; >>> 104 } pthread_cond_t; >>> 105 >>> >>> The total size of pthread_cond_t.__size is 48. But >>> PTHREAD_COND_INITIALIZER only initializes the first 44 bytes, thus the >>> last 4 bytes' value becomes unpredictable. The issue was gone after I >>> made the below change: >>> >>> 197 //#define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, >>> 0, 0}} >>> 198 #define PTHREAD_COND_INITIALIZER { .__size = {0}} >>> >> >> Err, those types should rather come from glibc, not [lib]gcc. >> >> Which glibc version are you using? >> >> Jan >> >>> >>> >>> 2021-05-10 17:40 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: >>>> BTW, I just wrote an application which is exactly the same with >>>> autoinit_simple_conddestroy. And it can run successfully in my board. >>>> >>>> 1 #include <stdio.h> >>>> 2 #include <pthread.h> >>>> 3 int main(void) >>>> 4 { >>>> 5 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; >>>> 6 >-------if(pthread_cond_destroy(&cond) == 0) >>>> 7 >------->-------printf("suc!\n"); >>>> 8 >-------else >>>> 9 >------->-------printf("err!\n"); >>>> 10 } >>>> >>>> sh-4.4# ./main >>>> suc! >>>> >>>> >>>> 2021-05-10 17:28 GMT+08:00, Fangsuo Wu <tiger20081015@gmail.com>: >>>>> Jan, >>>>> I removed the CFLAGS and LDFLAGS, with configure command: >>>>> >>>>> ./configure --build=i686-pc-linux-gnu --host=arm-linux-gnueabihf >>>>> --with-core=cobalt --enable-smp --enable-lazy-setsched >>>>> --enable-debug=symbols >>>>> >>>>> But the issue still remains. I changed the failed test case as below, >>>>> the issue still exists. >>>>> >>>>> 226 static void autoinit_simple_conddestroy(void) >>>>> 227 { >>>>> 228 >-------pthread_cond_t cond = PTHREAD_COND_INITIALIZER; >>>>> 229 #if 0 >>>>> 230 >-------pthread_cond_t cond2 = PTHREAD_COND_INITIALIZER; >>>>> 231 >-------unsigned int invalmagic = ~0x86860505; // >>>>> ~COBALT_COND_MAGIC >>>>> 232 >>>>> 233 >-------memcpy((char *)&cond2 + sizeof(cond2) - sizeof(invalmagic), >>>>> 234 >------->-------&invalmagic, sizeof(invalmagic)); >>>>> 235 >>>>> 236 >-------smokey_trace("%s", __func__); >>>>> 237 #endif >>>>> 238 >-------check("cond_destroy", cond_destroy(&cond), 0); >>>>> 239 //>-----check("cond_destroy invalid", cond_destroy(&cond2), >>>>> -EINVAL); >>>>> 240 } >>>>> >>>>> I'll try QEMU later to see if the issue also exits in QEMU. >>>>> >>>>> BTW, I saw some below warnings in compiling, do they have any >>>>> relationship with the issue? >>>>> /bin/bash ../../../libtool --mode=install /usr/bin/install -c >>>>> smokey_net_server '/home/data/nfs_test//usr/xenomai/bin' >>>>> libtool: warning: '../../../lib/cobalt/libcobalt.la' has not been >>>>> installed in '/usr/xenomai/lib' >>>>> libtool: warning: '../../../lib/cobalt/libmodechk.la' has not been >>>>> installed in '/usr/xenomai/lib' >>>>> >>>>> >>>>> >>>>> >>>>> 2021-05-10 15:35 GMT+08:00, Jan Kiszka <jan.kiszka@siemens.com>: >>>>>> On 10.05.21 09:20, Fangsuo Wu wrote: >>>>>>> Jan, >>>>>>> Thanks for your reply. The environment I used is listed below. BTW, I >>>>>>> can run latency test successfully. >>>>>>> >>>>>>> 1. The revision of Xenomai: xenomai-3.1.tar.bz2 >>>>>>> 2. Soc: dual ARM cortex A7 >>>>>>> 3. How I built application libraries: >>>>>>> ./configure CFLAGS="-march=armv7-a -mfpu=vfp3" >>>>>>> LDFLAGS="-march=armv7-a -mfpu=vfp3" --build=i686-pc-linux-gnu >>>>>>> --host=arm-linux-gnueabihf --with-core=cobalt --enable-smp >>>>>>> --enable-pshared >>>>>>> make DESTDIR=/home/data/nfs_test/ install >>>>>>> 4. The kernel I used is 4.19 so I applied >>>>>>> ipipe-core-4.19.55-arm-5.patch, and manually enabled >>>>>>> CONFIG_IPIPE_ARM_KUSER_TSC. The full config file is: >>>>>>> >>>>>> >>>>>> OK - our qemu-armhf target [1] is multicore A7 as well. Do you see the >>>>>> problem in QEMU, too? Do any of the extra CFLAGS or LDFLAGS you pass >>>>>> play a role here? We compile in CI only with "--enable-smp >>>>>> --enable-lazy-setsched --enable-debug=symbols" - maybe >>>>>> "--enable-pshared"... >>>>>> >>>>>> Jan >>>>>> >>>>>> [1] https://source.denx.de/Xenomai/xenomai-images/-/jobs/265962#L387 >>>>>> >>>>>> -- >>>>>> Siemens AG, T RDA IOT >>>>>> Corporate Competence Center Embedded Linux >>>>>> >>>>> >>>> >> >> -- >> Siemens AG, T RDA IOT >> Corporate Competence Center Embedded Linux >> -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-05-12 6:51 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-05-10 1:56 xeno-test failed due to cond_destroy error Fangsuo Wu 2021-05-10 6:49 ` Jan Kiszka 2021-05-10 7:20 ` Fangsuo Wu 2021-05-10 7:35 ` Jan Kiszka 2021-05-10 9:28 ` Fangsuo Wu 2021-05-10 9:40 ` Fangsuo Wu 2021-05-11 10:37 ` Fangsuo Wu 2021-05-11 15:10 ` Jan Kiszka 2021-05-12 2:08 ` Fangsuo Wu 2021-05-12 6:51 ` Jan Kiszka
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.