From: Simon Arlott <simon@fire.lp0.eu> To: Guenter Roeck <linux@roeck-us.net>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, Ralf Baechle <ralf@linux-mips.org>, Thomas Gleixner <tglx@linutronix.de>, Jason Cooper <jason@lakedaemon.net>, Marc Zyngier <marc.zyngier@arm.com>, Kevin Cernekee <cernekee@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, Wim Van Sebroeck <wim@iguana.be>, Maxime Bizon <mbizon@freebox.fr>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, linux-mips@linux-mips.org, linux-watchdog@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, Jonas Gorski <jogo@openwrt.org> Subject: [PATCH 8/10] watchdog: bcm63xx_wdt: Remove dependency on mach-bcm63xx functions/defines Date: Sun, 22 Nov 2015 14:11:39 +0000 [thread overview] Message-ID: <5651CD1B.1000600@simon.arlott.org.uk> (raw) In-Reply-To: <5651CB13.4090704@simon.arlott.org.uk> The bcm_readl() and bcm_writel() functions are only defined for mach-bcm63xx, replace them with __raw_readl() and raw_writel(). The register defines required for the watchdog are in a mach-bcm63xx header file. Move them to include/linux/bcm63xx_wdt.h so that they are also available on other machine types. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> --- MAINTAINERS | 1 + arch/mips/bcm63xx/prom.c | 1 + arch/mips/bcm63xx/setup.c | 1 + arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 22 -------------------- drivers/watchdog/bcm63xx_wdt.c | 25 +++++++++++------------ include/linux/bcm63xx_wdt.h | 22 ++++++++++++++++++++ 6 files changed, 37 insertions(+), 35 deletions(-) create mode 100644 include/linux/bcm63xx_wdt.h diff --git a/MAINTAINERS b/MAINTAINERS index 63bf54a..a27b99f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2376,6 +2376,7 @@ F: arch/mips/boot/dts/brcm/bcm*.dts* F: drivers/irqchip/irq-bcm63* F: drivers/irqchip/irq-bcm7* F: drivers/irqchip/irq-brcmstb* +F: include/linux/bcm63xx_wdt.h BROADCOM TG3 GIGABIT ETHERNET DRIVER M: Prashant Sreedharan <prashant@broadcom.com> diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c index 7019e29..d2800fb 100644 --- a/arch/mips/bcm63xx/prom.c +++ b/arch/mips/bcm63xx/prom.c @@ -6,6 +6,7 @@ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> */ +#include <linux/bcm63xx_wdt.h> #include <linux/init.h> #include <linux/bootmem.h> #include <linux/smp.h> diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index 240fb4f..d1d666d 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -6,6 +6,7 @@ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> */ +#include <linux/bcm63xx_wdt.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 5035f09..16a745b 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -441,28 +441,6 @@ /************************************************************************* - * _REG relative to RSET_WDT - *************************************************************************/ - -/* Watchdog default count register */ -#define WDT_DEFVAL_REG 0x0 - -/* Watchdog control register */ -#define WDT_CTL_REG 0x4 - -/* Watchdog control register constants */ -#define WDT_START_1 (0xff00) -#define WDT_START_2 (0x00ff) -#define WDT_STOP_1 (0xee00) -#define WDT_STOP_2 (0x00ee) - -/* Watchdog reset length register */ -#define WDT_RSTLEN_REG 0x8 - -/* Watchdog soft reset register (BCM6328 only) */ -#define WDT_SOFTRESET_REG 0xc - -/************************************************************************* * _REG relative to RSET_GPIO *************************************************************************/ diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c index 7109eb4..7522624 100644 --- a/drivers/watchdog/bcm63xx_wdt.c +++ b/drivers/watchdog/bcm63xx_wdt.c @@ -13,6 +13,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/bcm63xx_wdt.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/errno.h> @@ -27,8 +28,6 @@ #include <linux/resource.h> #include <linux/platform_device.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> #include <bcm63xx_regs.h> #include <bcm63xx_timer.h> @@ -55,9 +54,9 @@ static int bcm63xx_wdt_start(struct watchdog_device *wdd) unsigned long flags; raw_spin_lock_irqsave(&hw->lock, flags); - bcm_writel(wdd->timeout * hw->clock_hz, hw->regs + WDT_DEFVAL_REG); - bcm_writel(WDT_START_1, hw->regs + WDT_CTL_REG); - bcm_writel(WDT_START_2, hw->regs + WDT_CTL_REG); + __raw_writel(wdd->timeout * hw->clock_hz, hw->regs + WDT_DEFVAL_REG); + __raw_writel(WDT_START_1, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_START_2, hw->regs + WDT_CTL_REG); hw->running = true; raw_spin_unlock_irqrestore(&hw->lock, flags); return 0; @@ -69,8 +68,8 @@ static int bcm63xx_wdt_stop(struct watchdog_device *wdd) unsigned long flags; raw_spin_lock_irqsave(&hw->lock, flags); - bcm_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG); - bcm_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG); hw->running = false; raw_spin_unlock_irqrestore(&hw->lock, flags); return 0; @@ -106,10 +105,10 @@ static void bcm63xx_wdt_isr(void *data) raw_spin_lock_irqsave(&hw->lock, flags); if (!hw->running) { /* Stop the watchdog as it shouldn't be running */ - bcm_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG); - bcm_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG); } else { - u32 timeleft = bcm_readl(hw->regs + WDT_CTL_REG); + u32 timeleft = __raw_readl(hw->regs + WDT_CTL_REG); u32 ms; if (timeleft >= 2) { @@ -123,9 +122,9 @@ static void bcm63xx_wdt_isr(void *data) * This is done with a lock held in case userspace is * trying to restart the watchdog on another CPU. */ - bcm_writel(timeleft, hw->regs + WDT_DEFVAL_REG); - bcm_writel(WDT_START_1, hw->regs + WDT_CTL_REG); - bcm_writel(WDT_START_2, hw->regs + WDT_CTL_REG); + __raw_writel(timeleft, hw->regs + WDT_DEFVAL_REG); + __raw_writel(WDT_START_1, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_START_2, hw->regs + WDT_CTL_REG); } else { /* The watchdog cannot be started with a time of less * than 2 ticks (it won't fire). diff --git a/include/linux/bcm63xx_wdt.h b/include/linux/bcm63xx_wdt.h new file mode 100644 index 0000000..2e9210b --- /dev/null +++ b/include/linux/bcm63xx_wdt.h @@ -0,0 +1,22 @@ +#ifndef LINUX_BCM63XX_WDT_H_ +#define LINUX_BCM63XX_WDT_H_ + +/* Watchdog default count register */ +#define WDT_DEFVAL_REG 0x0 + +/* Watchdog control register */ +#define WDT_CTL_REG 0x4 + +/* Watchdog control register constants */ +#define WDT_START_1 (0xff00) +#define WDT_START_2 (0x00ff) +#define WDT_STOP_1 (0xee00) +#define WDT_STOP_2 (0x00ee) + +/* Watchdog reset length register */ +#define WDT_RSTLEN_REG 0x8 + +/* Watchdog soft reset register (BCM6328 only) */ +#define WDT_SOFTRESET_REG 0xc + +#endif -- 2.1.4 -- Simon Arlott
WARNING: multiple messages have this Message-ID (diff)
From: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org> To: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>, "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>, Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>, Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>, Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>, Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>, Maxime Bizon <mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org>, Linux Kernel Mailing List <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>, Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>, Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>, Jonas Gorski <jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> Subject: [PATCH 8/10] watchdog: bcm63xx_wdt: Remove dependency on mach-bcm63xx functions/defines Date: Sun, 22 Nov 2015 14:11:39 +0000 [thread overview] Message-ID: <5651CD1B.1000600@simon.arlott.org.uk> (raw) In-Reply-To: <5651CB13.4090704-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org> The bcm_readl() and bcm_writel() functions are only defined for mach-bcm63xx, replace them with __raw_readl() and raw_writel(). The register defines required for the watchdog are in a mach-bcm63xx header file. Move them to include/linux/bcm63xx_wdt.h so that they are also available on other machine types. Signed-off-by: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org> --- MAINTAINERS | 1 + arch/mips/bcm63xx/prom.c | 1 + arch/mips/bcm63xx/setup.c | 1 + arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 22 -------------------- drivers/watchdog/bcm63xx_wdt.c | 25 +++++++++++------------ include/linux/bcm63xx_wdt.h | 22 ++++++++++++++++++++ 6 files changed, 37 insertions(+), 35 deletions(-) create mode 100644 include/linux/bcm63xx_wdt.h diff --git a/MAINTAINERS b/MAINTAINERS index 63bf54a..a27b99f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2376,6 +2376,7 @@ F: arch/mips/boot/dts/brcm/bcm*.dts* F: drivers/irqchip/irq-bcm63* F: drivers/irqchip/irq-bcm7* F: drivers/irqchip/irq-brcmstb* +F: include/linux/bcm63xx_wdt.h BROADCOM TG3 GIGABIT ETHERNET DRIVER M: Prashant Sreedharan <prashant-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c index 7019e29..d2800fb 100644 --- a/arch/mips/bcm63xx/prom.c +++ b/arch/mips/bcm63xx/prom.c @@ -6,6 +6,7 @@ * Copyright (C) 2008 Maxime Bizon <mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org> */ +#include <linux/bcm63xx_wdt.h> #include <linux/init.h> #include <linux/bootmem.h> #include <linux/smp.h> diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index 240fb4f..d1d666d 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -6,6 +6,7 @@ * Copyright (C) 2008 Maxime Bizon <mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org> */ +#include <linux/bcm63xx_wdt.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 5035f09..16a745b 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -441,28 +441,6 @@ /************************************************************************* - * _REG relative to RSET_WDT - *************************************************************************/ - -/* Watchdog default count register */ -#define WDT_DEFVAL_REG 0x0 - -/* Watchdog control register */ -#define WDT_CTL_REG 0x4 - -/* Watchdog control register constants */ -#define WDT_START_1 (0xff00) -#define WDT_START_2 (0x00ff) -#define WDT_STOP_1 (0xee00) -#define WDT_STOP_2 (0x00ee) - -/* Watchdog reset length register */ -#define WDT_RSTLEN_REG 0x8 - -/* Watchdog soft reset register (BCM6328 only) */ -#define WDT_SOFTRESET_REG 0xc - -/************************************************************************* * _REG relative to RSET_GPIO *************************************************************************/ diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c index 7109eb4..7522624 100644 --- a/drivers/watchdog/bcm63xx_wdt.c +++ b/drivers/watchdog/bcm63xx_wdt.c @@ -13,6 +13,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/bcm63xx_wdt.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/errno.h> @@ -27,8 +28,6 @@ #include <linux/resource.h> #include <linux/platform_device.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> #include <bcm63xx_regs.h> #include <bcm63xx_timer.h> @@ -55,9 +54,9 @@ static int bcm63xx_wdt_start(struct watchdog_device *wdd) unsigned long flags; raw_spin_lock_irqsave(&hw->lock, flags); - bcm_writel(wdd->timeout * hw->clock_hz, hw->regs + WDT_DEFVAL_REG); - bcm_writel(WDT_START_1, hw->regs + WDT_CTL_REG); - bcm_writel(WDT_START_2, hw->regs + WDT_CTL_REG); + __raw_writel(wdd->timeout * hw->clock_hz, hw->regs + WDT_DEFVAL_REG); + __raw_writel(WDT_START_1, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_START_2, hw->regs + WDT_CTL_REG); hw->running = true; raw_spin_unlock_irqrestore(&hw->lock, flags); return 0; @@ -69,8 +68,8 @@ static int bcm63xx_wdt_stop(struct watchdog_device *wdd) unsigned long flags; raw_spin_lock_irqsave(&hw->lock, flags); - bcm_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG); - bcm_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG); hw->running = false; raw_spin_unlock_irqrestore(&hw->lock, flags); return 0; @@ -106,10 +105,10 @@ static void bcm63xx_wdt_isr(void *data) raw_spin_lock_irqsave(&hw->lock, flags); if (!hw->running) { /* Stop the watchdog as it shouldn't be running */ - bcm_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG); - bcm_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG); } else { - u32 timeleft = bcm_readl(hw->regs + WDT_CTL_REG); + u32 timeleft = __raw_readl(hw->regs + WDT_CTL_REG); u32 ms; if (timeleft >= 2) { @@ -123,9 +122,9 @@ static void bcm63xx_wdt_isr(void *data) * This is done with a lock held in case userspace is * trying to restart the watchdog on another CPU. */ - bcm_writel(timeleft, hw->regs + WDT_DEFVAL_REG); - bcm_writel(WDT_START_1, hw->regs + WDT_CTL_REG); - bcm_writel(WDT_START_2, hw->regs + WDT_CTL_REG); + __raw_writel(timeleft, hw->regs + WDT_DEFVAL_REG); + __raw_writel(WDT_START_1, hw->regs + WDT_CTL_REG); + __raw_writel(WDT_START_2, hw->regs + WDT_CTL_REG); } else { /* The watchdog cannot be started with a time of less * than 2 ticks (it won't fire). diff --git a/include/linux/bcm63xx_wdt.h b/include/linux/bcm63xx_wdt.h new file mode 100644 index 0000000..2e9210b --- /dev/null +++ b/include/linux/bcm63xx_wdt.h @@ -0,0 +1,22 @@ +#ifndef LINUX_BCM63XX_WDT_H_ +#define LINUX_BCM63XX_WDT_H_ + +/* Watchdog default count register */ +#define WDT_DEFVAL_REG 0x0 + +/* Watchdog control register */ +#define WDT_CTL_REG 0x4 + +/* Watchdog control register constants */ +#define WDT_START_1 (0xff00) +#define WDT_START_2 (0x00ff) +#define WDT_STOP_1 (0xee00) +#define WDT_STOP_2 (0x00ee) + +/* Watchdog reset length register */ +#define WDT_RSTLEN_REG 0x8 + +/* Watchdog soft reset register (BCM6328 only) */ +#define WDT_SOFTRESET_REG 0xc + +#endif -- 2.1.4 -- Simon Arlott -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-22 14:11 UTC|newest] Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-11-21 19:02 [PATCH 1/4] clocksource: Add brcm,bcm6345-timer device tree binding Simon Arlott 2015-11-21 19:02 ` Simon Arlott 2015-11-21 19:03 ` [PATCH 2/4] MIPS: bmips: Add bcm6345-l2-timer interrupt controller Simon Arlott 2015-11-21 19:04 ` [PATCH 3/4] watchdog: Add brcm,bcm6345-wdt device tree binding Simon Arlott 2015-11-22 22:13 ` Rob Herring 2015-11-22 22:13 ` Rob Herring 2015-11-21 19:05 ` [PATCH 4/4] MIPS: bmips: Convert bcm63xx_wdt to use WATCHDOG_CORE Simon Arlott 2015-11-21 19:05 ` Simon Arlott 2015-11-21 21:32 ` Guenter Roeck 2015-11-21 21:44 ` Simon Arlott 2015-11-21 21:44 ` Simon Arlott 2015-11-22 2:32 ` Guenter Roeck 2015-11-22 14:02 ` [PATCH 4/10] (Was: [PATCH 4/4]) " Simon Arlott 2015-11-22 14:05 ` [PATCH 4/10] watchdog: bcm63xx_wdt: Handle hardware interrupt and remove software timer Simon Arlott 2015-11-24 18:21 ` Guenter Roeck 2015-11-24 18:21 ` Guenter Roeck 2015-11-24 18:21 ` Guenter Roeck 2015-11-25 20:14 ` Jonas Gorski 2015-11-25 20:14 ` Jonas Gorski 2015-11-25 20:28 ` Simon Arlott 2015-11-25 20:28 ` Simon Arlott 2015-11-25 22:33 ` [PATCH (v2) " Simon Arlott 2015-11-25 22:33 ` Simon Arlott 2015-11-22 14:06 ` [PATCH 5/10] watchdog: bcm63xx_wdt: Use WATCHDOG_CORE Simon Arlott 2015-11-22 14:06 ` Simon Arlott 2015-11-25 2:44 ` Guenter Roeck 2015-11-25 2:44 ` Guenter Roeck 2015-11-25 13:02 ` Simon Arlott 2015-11-25 14:10 ` Guenter Roeck 2015-11-25 14:10 ` Guenter Roeck 2015-11-25 19:43 ` Simon Arlott 2015-11-25 19:43 ` Simon Arlott 2015-11-25 22:40 ` [PATCH (v3) 5/11] " Simon Arlott 2015-11-25 22:40 ` Simon Arlott 2015-11-22 14:07 ` [PATCH 6/10] watchdog: bcm63xx_wdt: Obtain watchdog clock HZ from "periph" clk Simon Arlott 2015-11-22 14:07 ` Simon Arlott 2015-11-23 15:02 ` Jonas Gorski 2015-11-23 15:02 ` Jonas Gorski 2015-11-23 18:19 ` Florian Fainelli 2015-11-23 18:19 ` Florian Fainelli 2015-11-23 19:00 ` Simon Arlott 2015-11-23 19:00 ` Simon Arlott 2015-11-24 22:12 ` [PATCH (v2) " Simon Arlott 2015-11-24 22:42 ` Florian Fainelli 2015-11-24 22:42 ` Florian Fainelli 2015-11-25 22:47 ` [PATCH (v3) 6/11] " Simon Arlott 2015-11-25 22:47 ` Simon Arlott 2015-11-22 14:09 ` [PATCH 7/10] watchdog: bcm63xx_wdt: Add get_timeleft function Simon Arlott 2015-11-22 14:09 ` Simon Arlott 2015-11-24 22:15 ` [PATCH (v2) " Simon Arlott 2015-11-24 22:15 ` Simon Arlott 2015-11-24 22:43 ` Florian Fainelli 2015-11-24 22:43 ` Florian Fainelli 2015-11-25 2:51 ` Guenter Roeck 2015-11-25 2:51 ` Guenter Roeck 2015-11-25 8:17 ` Simon Arlott 2015-11-25 8:17 ` Simon Arlott 2015-11-25 22:50 ` [PATCH (v3) 7/11] " Simon Arlott 2015-11-25 22:50 ` Simon Arlott 2015-11-25 22:54 ` [PATCH (v4) " Simon Arlott 2015-11-25 22:54 ` Simon Arlott 2015-11-25 22:57 ` [PATCH (v4) 8/11] watchdog: bcm63xx_wdt: Warn if the watchdog is currently running Simon Arlott 2015-11-25 22:57 ` Simon Arlott 2015-11-22 14:11 ` Simon Arlott [this message] 2015-11-22 14:11 ` [PATCH 8/10] watchdog: bcm63xx_wdt: Remove dependency on mach-bcm63xx functions/defines Simon Arlott 2015-11-22 14:12 ` [PATCH 9/10] watchdog: bcm63xx_wdt: Use bcm63xx_timer interrupt directly Simon Arlott 2015-11-22 14:12 ` Simon Arlott 2015-11-25 23:03 ` [PATCH (v2) 10/11] " Simon Arlott 2015-11-25 23:03 ` Simon Arlott 2015-11-22 14:14 ` [PATCH 10/10] watchdog: bcm63xx_wdt: Use brcm,bcm6345-wdt device tree binding Simon Arlott 2015-11-22 14:14 ` Simon Arlott 2015-11-25 23:09 ` [PATCH (v2) 11/11] " Simon Arlott 2015-11-25 23:09 ` Simon Arlott 2015-11-22 22:12 ` [PATCH 1/4] clocksource: Add brcm,bcm6345-timer " Rob Herring 2015-11-23 15:33 ` Jonas Gorski 2015-11-23 18:55 ` [PATCH (v2) 1/10] " Simon Arlott 2015-11-23 18:55 ` Simon Arlott 2015-11-23 18:57 ` [PATCH (v2) 2/10] MIPS: bmips: Add bcm6345-l2-timer interrupt controller Simon Arlott 2015-11-23 18:57 ` Simon Arlott 2015-11-24 22:10 ` [PATCH (v3) " Simon Arlott 2015-11-24 22:10 ` Simon Arlott 2015-11-24 22:36 ` Florian Fainelli 2015-11-24 22:36 ` Florian Fainelli 2015-11-26 22:32 ` [PATCH (v4) 2/11] " Simon Arlott 2015-11-27 8:37 ` Thomas Gleixner 2015-11-27 8:37 ` Thomas Gleixner 2015-11-28 12:26 ` [PATCH (v5) 3/11] " Simon Arlott 2015-11-28 12:26 ` Simon Arlott 2015-12-01 0:22 ` Guenter Roeck 2015-12-01 0:22 ` Guenter Roeck 2016-05-09 12:01 ` Álvaro Fernández Rojas 2016-05-09 13:06 ` Guenter Roeck 2016-05-09 13:06 ` Guenter Roeck 2016-05-11 6:40 ` [PATCH 2/4] " Álvaro Fernández Rojas 2015-11-25 3:05 ` [PATCH (v2) 1/10] clocksource: Add brcm,bcm6345-timer device tree binding Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=5651CD1B.1000600@simon.arlott.org.uk \ --to=simon@fire.lp0.eu \ --cc=cernekee@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=galak@codeaurora.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=jason@lakedaemon.net \ --cc=jogo@openwrt.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@linux-mips.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=marc.zyngier@arm.com \ --cc=mark.rutland@arm.com \ --cc=mbizon@freebox.fr \ --cc=pawel.moll@arm.com \ --cc=ralf@linux-mips.org \ --cc=robh+dt@kernel.org \ --cc=tglx@linutronix.de \ --cc=wim@iguana.be \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.