* [Buildroot] [PATCH V3 RESEND 1/5] aarch64: align aarch64_be config with aarch64s'
2015-08-13 1:16 [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Bamvor Jian Zhang
@ 2015-08-13 1:16 ` Bamvor Jian Zhang
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 2/5] aarch64: ilp32: handle special file name Bamvor Jian Zhang
` (4 subsequent siblings)
5 siblings, 0 replies; 18+ messages in thread
From: Bamvor Jian Zhang @ 2015-08-13 1:16 UTC (permalink / raw)
To: buildroot
From: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
---
package/binutils/Config.in | 4 ++--
package/binutils/Config.in.host | 5 +++--
package/dropwatch/Config.in | 5 +++--
package/gcc/Config.in.host | 8 ++++----
package/gdb/Config.in.host | 2 +-
package/gpsd/Config.in | 2 +-
package/lightning/Config.in | 5 +++--
package/nginx/Config.in | 3 +--
package/oprofile/Config.in | 6 ++++--
toolchain/toolchain-buildroot/Config.in | 7 ++++---
10 files changed, 26 insertions(+), 21 deletions(-)
diff --git a/package/binutils/Config.in b/package/binutils/Config.in
index 64d0a09..f9e0f16 100644
--- a/package/binutils/Config.in
+++ b/package/binutils/Config.in
@@ -1,7 +1,7 @@
config BR2_PACKAGE_BINUTILS
bool "binutils"
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE
- depends on !BR2_aarch64 && !BR2_nios2
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2
depends on BR2_USE_WCHAR
help
Install binutils on the target
@@ -22,5 +22,5 @@ config BR2_PACKAGE_BINUTILS_TARGET
endif
comment "binutils needs a toolchain w/ wchar"
- depends on !BR2_aarch64 && !BR2_nios2
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2
depends on !BR2_USE_WCHAR
diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host
index 40619ab..0ead1ff 100644
--- a/package/binutils/Config.in.host
+++ b/package/binutils/Config.in.host
@@ -8,8 +8,9 @@ choice
Select the version of binutils you wish to use.
config BR2_BINUTILS_VERSION_2_23_X
- depends on !BR2_aarch64 && !BR2_microblaze && \
- !BR2_powerpc64le && !BR2_nios2
+ depends on !BR2_aarch64 && !BR2_aarch64_be && \
+ !BR2_microblaze && !BR2_powerpc64le && \
+ !BR2_nios2
bool "binutils 2.23.2"
config BR2_BINUTILS_VERSION_2_24_X
diff --git a/package/dropwatch/Config.in b/package/dropwatch/Config.in
index d331e5e..e109242 100644
--- a/package/dropwatch/Config.in
+++ b/package/dropwatch/Config.in
@@ -1,7 +1,8 @@
config BR2_PACKAGE_DROPWATCH
bool "dropwatch"
select BR2_PACKAGE_BINUTILS
- depends on !BR2_aarch64 && !BR2_nios2 # binutils
+ # binutils
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2
depends on BR2_USE_WCHAR # binutils
select BR2_PACKAGE_READLINE
select BR2_PACKAGE_LIBNL
@@ -13,5 +14,5 @@ config BR2_PACKAGE_DROPWATCH
https://fedorahosted.org/dropwatch/
comment "dropwatch needs a toolchain w/ threads, wchar"
- depends on !BR2_aarch64 && !BR2_nios2
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2
depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR
diff --git a/package/gcc/Config.in.host b/package/gcc/Config.in.host
index baa7956..7014e7f 100644
--- a/package/gcc/Config.in.host
+++ b/package/gcc/Config.in.host
@@ -17,8 +17,8 @@ choice
bool "gcc 4.5.x"
depends on BR2_DEPRECATED_SINCE_2015_05
# Broken or unsupported architectures
- depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc \
- && !BR2_powerpc64le && !BR2_nios2
+ depends on !BR2_microblaze && !BR2_aarch64 && !BR2_aarch64_be && \
+ !BR2_arc && !BR2_powerpc64le && !BR2_nios2
# Broken or unsupported ARM cores
depends on !BR2_cortex_a7 && !BR2_cortex_a12 && \
!BR2_cortex_a15 && !BR2_fa526 && !BR2_pj4
@@ -39,8 +39,8 @@ choice
config BR2_GCC_VERSION_4_7_X
bool "gcc 4.7.x"
# Broken or unsupported architectures
- depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc \
- && !BR2_powerpc64le && !BR2_nios2
+ depends on !BR2_microblaze && !BR2_aarch64 && !BR2_aarch64_be && \
+ !BR2_arc && !BR2_powerpc64le && !BR2_nios2
# Broken or unsupported ARM cores
depends on !BR2_cortex_a12 && !BR2_pj4
# Broken or unsupported PPC cores
diff --git a/package/gdb/Config.in.host b/package/gdb/Config.in.host
index 3207794..d736f25 100644
--- a/package/gdb/Config.in.host
+++ b/package/gdb/Config.in.host
@@ -4,7 +4,7 @@ config BR2_PACKAGE_HOST_GDB
# allow to build a cross-gdb, as the one of the external
# toolchain should be used.
depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
- depends on !BR2_aarch64 && !BR2_nios2
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2
help
Build a cross gdb that runs on the host machine and debugs
programs running on the target. It requires 'gdbserver'
diff --git a/package/gpsd/Config.in b/package/gpsd/Config.in
index fa8b8f6..36813ab 100644
--- a/package/gpsd/Config.in
+++ b/package/gpsd/Config.in
@@ -39,7 +39,7 @@ config BR2_PACKAGE_GPSD_OLDSTYLE
config BR2_PACKAGE_GPSD_PROFILING
bool "profiling support"
depends on BR2_TOOLCHAIN_USES_GLIBC
- depends on !BR2_aarch64
+ depends on !BR2_aarch64 && !BR2_aarch64_be
comment "profiling support not available with uClibc-based toolchain"
depends on !BR2_TOOLCHAIN_USES_GLIBC
diff --git a/package/lightning/Config.in b/package/lightning/Config.in
index 8caf39f..3ca477a 100644
--- a/package/lightning/Config.in
+++ b/package/lightning/Config.in
@@ -14,13 +14,14 @@ config BR2_PACKAGE_LIGHTNING_DISASSEMBLER
bool "enable disassembler"
select BR2_PACKAGE_BINUTILS
select BR2_PACKAGE_ZLIB
- depends on !BR2_aarch64 && !BR2_nios2 # binutils
+ # binutils
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2
depends on BR2_USE_WCHAR # binutils
help
Enable the GNU lightning disassembler.
comment "lightning disassembler needs a toolchain w/ wchar"
- depends on !BR2_aarch64 && !BR2_nios2
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2
depends on !BR2_USE_WCHAR
endif
diff --git a/package/nginx/Config.in b/package/nginx/Config.in
index be445f4..ef0266e 100644
--- a/package/nginx/Config.in
+++ b/package/nginx/Config.in
@@ -15,8 +15,7 @@ config BR2_PACKAGE_NGINX_FILE_AIO
# but it's available on neither AArch64 nor ARC where only
# eventfd() is available. See
# https://bugs.launchpad.net/linaro-aarch64/+bug/1160013
- depends on !BR2_aarch64
- depends on !BR2_arc
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_arc
config BR2_PACKAGE_NGINX_HTTP
bool "http server"
diff --git a/package/oprofile/Config.in b/package/oprofile/Config.in
index 9cf5693..b5d0bb6 100644
--- a/package/oprofile/Config.in
+++ b/package/oprofile/Config.in
@@ -5,7 +5,8 @@ config BR2_PACKAGE_OPROFILE
select BR2_PACKAGE_BINUTILS
select BR2_PACKAGE_LIBPFM4 if BR2_powerpc
depends on BR2_INSTALL_LIBSTDCPP
- depends on !BR2_aarch64 && !BR2_nios2 # binutils
+ # binutils
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2
depends on BR2_USE_WCHAR # binutils
depends on !BR2_xtensa
# libpfm4 is needed on PowerPC, and requires thread support
@@ -28,7 +29,8 @@ config BR2_PACKAGE_OPROFILE
comment "oprofile needs a toolchain w/ C++, wchar"
depends on BR2_USE_MMU
- depends on !BR2_aarch64 && !BR2_nios2 && !BR2_xtensa
+ depends on !BR2_aarch64 && !BR2_aarch64_be && !BR2_nios2 && \
+ !BR2_xtensa
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR
comment "oprofile needs a toolchain w/ NPTL on PPC"
diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in
index 13e2b15..0869243 100644
--- a/toolchain/toolchain-buildroot/Config.in
+++ b/toolchain/toolchain-buildroot/Config.in
@@ -85,9 +85,10 @@ comment "(e)glibc only available with shared lib support"
config BR2_TOOLCHAIN_BUILDROOT_MUSL
bool "musl (experimental)"
- depends on BR2_aarch64 || BR2_arm || BR2_armeb || BR2_i386 || \
- BR2_microblaze || BR2_mips || BR2_mipsel || BR2_powerpc || \
- BR2_sh || BR2_x86_64
+ depends on BR2_arm || BR2_armeb || BR2_aarch64 || \
+ BR2_aarch64_be || BR2_i386 || BR2_microblaze || \
+ BR2_mips || BR2_mipsel || BR2_powerpc || \
+ BR2_sh || BR2_x86_64
depends on !BR2_powerpc_SPE # not supported, build breaks
select BR2_TOOLCHAIN_USES_MUSL
help
--
2.1.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [Buildroot] [PATCH V3 RESEND 2/5] aarch64: ilp32: handle special file name
2015-08-13 1:16 [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Bamvor Jian Zhang
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 1/5] aarch64: align aarch64_be config with aarch64s' Bamvor Jian Zhang
@ 2015-08-13 1:16 ` Bamvor Jian Zhang
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 3/5] aarch64: ilp32: add ilp32 compiler and linker flags Bamvor Jian Zhang
` (3 subsequent siblings)
5 siblings, 0 replies; 18+ messages in thread
From: Bamvor Jian Zhang @ 2015-08-13 1:16 UTC (permalink / raw)
To: buildroot
From: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
In aarch64 ilp32, the directory of library is libilp32. And the linker
is ld-linux-aarch64_ilp32.so.1 or ld-linux-aarch64_be_ilp32.so.1 which is
linked to libilp32/ld-VERSION.so(ld-2.20.so in my system).
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
---
Makefile | 6 +++
toolchain/helpers.mk | 5 ++-
toolchain/toolchain-external/toolchain-external.mk | 44 +++++++++++++++++++++-
3 files changed, 51 insertions(+), 4 deletions(-)
diff --git a/Makefile b/Makefile
index b4cef3f..df9a289 100644
--- a/Makefile
+++ b/Makefile
@@ -452,6 +452,12 @@ LIB_SYMLINK = lib64
else
LIB_SYMLINK = lib32
endif
+ifeq ($(BR2_GCC_TARGET_ABI), "ilp32")
+# On X86_64, ilp32 library will be located in libx32 directory.
+ifeq ($(BR2_aarch64)$(BR2_aarch64_be),y)
+LIB_SYMLINK = libilp32
+endif
+endif
$(STAGING_DIR):
@mkdir -p $(STAGING_DIR)/bin
diff --git a/toolchain/helpers.mk b/toolchain/helpers.mk
index 7c70d35..32f1587 100644
--- a/toolchain/helpers.mk
+++ b/toolchain/helpers.mk
@@ -38,7 +38,7 @@
#
# $1: arch specific sysroot directory
# $2: support libraries directory (can be empty)
-# $3: library directory ('lib' or 'lib64') from which libraries must be copied
+# $3: library directory ('lib', 'lib64' or 'libilp32') from which libraries must be copied
# $4: library name
# $5: destination directory of the libary, relative to $(TARGET_DIR)
#
@@ -141,7 +141,8 @@ copy_toolchain_sysroot = \
if [ -d $${ARCH_SYSROOT_DIR}/$$i ] ; then \
rsync -au --chmod=u=rwX,go=rX --exclude 'usr/lib/locale' \
--exclude lib --exclude lib32 --exclude lib64 \
- $${ARCH_SYSROOT_DIR}/$$i/ $(STAGING_DIR)/$$i/ ; \
+ --exclude libilp32 $${ARCH_SYSROOT_DIR}/$$i/ \
+ $(STAGING_DIR)/$$i/ ; \
fi ; \
done ; \
if [ `readlink -f $${SYSROOT_DIR}` != `readlink -f $${ARCH_SYSROOT_DIR}` ] ; then \
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 3cb59c6..344dd5a 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -86,6 +86,10 @@ ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
LIB_EXTERNAL_LIBS += libc.so libgcc_s.so.*
endif
+ifeq ($(BR2_GCC_TARGET_ABI), "ilp32")
+LIB_EXTERNAL_LIBS += ld*.so
+endif
+
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
USR_LIB_EXTERNAL_LIBS += libstdc++.so.*
endif
@@ -253,6 +257,19 @@ define TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
ln -snf . $(TARGET_DIR)/usr/lib/aarch64-linux-gnu
endef
+ifeq ($(BR2_GCC_TARGET_ABI), "ilp32")
+ifeq ($(BR2_ENDIAN), "LITTLE")
+define TOOLCHAIN_EXTERNAL_ILP32_SYMLINK
+ ln -sf ld*.so $(TARGET_DIR)/lib/ld-linux-aarch64_ilp32.so.1
+endef
+endif
+ifeq ($(BR2_ENDIAN), "BIG")
+define TOOLCHAIN_EXTERNAL_ILP32_SYMLINK
+ ln -sf ld*.so $(TARGET_DIR)/lib/ld-linux-aarch64_be_ilp32.so.1
+endef
+endif
+endif
+
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi
TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.05-24-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
@@ -394,6 +411,7 @@ TOOLCHAIN_EXTERNAL_SITE = $(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
TOOLCHAIN_EXTERNAL_SOURCE = $(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
# We can't check hashes for custom downloaded toolchains
BR_NO_CHECK_HASH_FOR += $(TOOLCHAIN_EXTERNAL_SOURCE)
+TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_ILP32_SYMLINK
endif
# In fact, we don't need to download the toolchain, since it is already
@@ -445,17 +463,18 @@ endef
# - lib64/
# - lib32-fp/ (Cavium toolchain)
# - lib64-fp/ (Cavium toolchain)
+# - libilp32/ (Aarch64/aarch64_be ilp32 library)
# - usr/lib/<tuple>/ (Linaro toolchain)
#
# And variations on these.
define toolchain_find_sysroot
-$$(echo -n $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:(usr/)?lib(32|64)?([^/]*)?/([^/]*/)?libc\.a::')
+$$(echo -n $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:(usr/)?lib(32|64|ilp32)?([^/]*)?/([^/]*/)?libc\.a::')
endef
# Returns the lib subdirectory for the given compiler + flags (i.e
# typically lib32 or lib64 for some toolchains)
define toolchain_find_libdir
-$$(echo -n $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:.*/(usr/)?(lib(32|64)?([^/]*)?)/([^/]*/)?libc.a:\2:')
+$$(echo -n $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:.*/(usr/)?(lib(32|64|ilp32)?([^/]*)?)/([^/]*/)?libc.a:\2:')
endef
# Checks for an already installed toolchain: check the toolchain
@@ -737,10 +756,30 @@ define TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO
fi
endef
+ifeq ($(BR2_GCC_TARGET_ABI), "ilp32")
+ifeq ($(BR2_aarch64)$(BR2_aarch64_be),y)
+ifeq ($(BR2_ENDIAN), "LITTLE")
+ILP32_SYM = ld-linux-aarch64_ilp32.so.1
+else
+ILP32_SYM = ld-linux-aarch64_be_ilp32.so.1
+endif
+define TOOLCHAIN_EXTERNAL_INSTALL_ILP32_LINK
+ LD_ILP32=`basename $(STAGING_DIR)/lib/ld*.so`; \
+ ln -sf $${LD_ILP32} $(STAGING_DIR)/lib/${ILP32_SYM}
+endef
+
+define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_ILP32_LINK
+ LD_ILP32=`basename $(TARGET_DIR)/lib/ld*.so`; \
+ ln -sf $${LD_ILP32} $(TARGET_DIR)/lib/${ILP32_SYM}
+endef
+endif
+endif
+
define TOOLCHAIN_EXTERNAL_INSTALL_STAGING_CMDS
$(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS)
$(TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER)
$(TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT)
+ $(TOOLCHAIN_EXTERNAL_INSTALL_ILP32_LINK)
endef
# Even though we're installing things in both the staging, the host
@@ -751,6 +790,7 @@ define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_CMDS
$(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC)
$(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT)
$(TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO)
+ $(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_ILP32_LINK)
endef
$(eval $(generic-package))
--
2.1.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [Buildroot] [PATCH V3 RESEND 3/5] aarch64: ilp32: add ilp32 compiler and linker flags
2015-08-13 1:16 [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Bamvor Jian Zhang
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 1/5] aarch64: align aarch64_be config with aarch64s' Bamvor Jian Zhang
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 2/5] aarch64: ilp32: handle special file name Bamvor Jian Zhang
@ 2015-08-13 1:16 ` Bamvor Jian Zhang
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 4/5] aarch64: ilp32: add ilp32 build config Bamvor Jian Zhang
` (2 subsequent siblings)
5 siblings, 0 replies; 18+ messages in thread
From: Bamvor Jian Zhang @ 2015-08-13 1:16 UTC (permalink / raw)
To: buildroot
From: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
In aarch64, lp64 is the default ABI. Need pass the special flags if
the user want to compile and link ilp32 application.
Pass the special flags to linker to ensure that linker see the
same abi with compiler.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
---
package/Makefile.in | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/package/Makefile.in b/package/Makefile.in
index 545694f..fa81b44 100644
--- a/package/Makefile.in
+++ b/package/Makefile.in
@@ -107,6 +107,17 @@ ifeq ($(BR2_arc)$(BR2_ARC_ATOMIC_EXT),yy)
TARGET_ABI += -matomic
endif
+ifeq ($(BR2_GCC_TARGET_ABI), "ilp32")
+ifeq ($(BR2_aarch64)$(BR2_aarch64_be),y)
+ifeq ($(BR2_ENDIAN), "BIG")
+TARGET_ABI_LDFLAGS += -Xlinker -EB -Xlinker -maarch64linux32b
+else
+TARGET_ABI_LDFLAGS += -Xlinker -maarch64linux32
+endif
+TARGET_ABI += -mabi=ilp32 $(TARGET_ABI_LDFLAGS)
+endif
+endif
+
STAGING_SUBDIR = usr/$(GNU_TARGET_NAME)/sysroot
STAGING_DIR = $(HOST_DIR)/$(STAGING_SUBDIR)
@@ -140,7 +151,7 @@ endif
TARGET_CPPFLAGS += -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
TARGET_CFLAGS = $(TARGET_CPPFLAGS) $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING)
TARGET_CXXFLAGS = $(TARGET_CFLAGS)
-TARGET_LDFLAGS = $(call qstrip,$(BR2_TARGET_LDFLAGS))
+TARGET_LDFLAGS = $(call qstrip,$(BR2_TARGET_LDFLAGS)) $(TARGET_ABI_LDFLAGS)
ifeq ($(BR2_BINFMT_FLAT),y)
TARGET_CFLAGS += $(if $($(PKG)_FLAT_STACKSIZE),-Wl$(comma)-elf2flt=-s$($(PKG)_FLAT_STACKSIZE),\
--
2.1.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [Buildroot] [PATCH V3 RESEND 4/5] aarch64: ilp32: add ilp32 build config
2015-08-13 1:16 [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Bamvor Jian Zhang
` (2 preceding siblings ...)
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 3/5] aarch64: ilp32: add ilp32 compiler and linker flags Bamvor Jian Zhang
@ 2015-08-13 1:16 ` Bamvor Jian Zhang
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 5/5] aarch64: ilp32 defconfig examples Bamvor Jian Zhang
2016-01-16 15:25 ` [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Romain Naour
5 siblings, 0 replies; 18+ messages in thread
From: Bamvor Jian Zhang @ 2015-08-13 1:16 UTC (permalink / raw)
To: buildroot
From: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
Add ILP32 in menuconfig. And disable the libc and toolchain which
does not support ILP32.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
---
arch/Config.in.aarch64 | 36 ++++++++++++++++++++++++++++++++++
package/gcc/Config.in.host | 3 ++-
toolchain/Config.in | 2 ++
toolchain/toolchain-external/Config.in | 22 +++++++++++++++++++++
4 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/arch/Config.in.aarch64 b/arch/Config.in.aarch64
index 325bccc..b4e3e43 100644
--- a/arch/Config.in.aarch64
+++ b/arch/Config.in.aarch64
@@ -8,3 +8,39 @@ config BR2_ENDIAN
config BR2_ARCH_HAS_ATOMICS
default y
+
+config BR2_GCC_TARGET_ABI
+ default "" if BR2_AARCH64_LP64
+ default "ilp32" if BR2_AARCH64_ILP32
+
+choice
+ prompt "Target ABI"
+ depends on BR2_aarch64 || BR2_aarch64_be
+ default BR2_AARCH64_LP64
+ help
+ Application Binary Interface to use. The Application Binary
+ Interface describes the calling conventions (how arguments
+ are passed to functions, how the return value is passed, how
+ system calls are made, etc.).
+
+config BR2_AARCH64_LP64
+ bool "LP64"
+ help
+ The LP64 is the default ABI in aarch64. It means that
+ long and pointer is 64bit.
+
+config BR2_AARCH64_ILP32
+ bool "ILP32"
+ help
+ ILP32 is a method for running 32bit application on 64bit platform, such
+ binary is elf32 with aarch64 assembly and is compiled by 64bit compiler.
+ Refer the following table:
+
+ \- | arm 32bit | arm64 ILP32 | arm64 LP64
+ ----------------|-------------|-------------|-------------
+ instruction set | armv7-a | armv8-a | armv8-a
+ int | 32bit | 32bit | 32bit
+ long | 32bit | **32bit** | 64bit
+ pointer | 32bit | **32bit** | 64bit
+
+endchoice
diff --git a/package/gcc/Config.in.host b/package/gcc/Config.in.host
index 7014e7f..7546953 100644
--- a/package/gcc/Config.in.host
+++ b/package/gcc/Config.in.host
@@ -57,7 +57,8 @@ choice
bool "gcc 4.8.x"
# Broken or unsupported architectures
depends on !BR2_microblaze && !BR2_arc \
- && !BR2_powerpc64le && !BR2_nios2
+ && !BR2_powerpc64le && !BR2_nios2 \
+ && !BR2_AARCH64_ILP32
# Broken or unsupported ARM cores
depends on !BR2_cortex_a12
# Broken or unsupported PPC cores
diff --git a/toolchain/Config.in b/toolchain/Config.in
index a851ce4..794bf8b 100644
--- a/toolchain/Config.in
+++ b/toolchain/Config.in
@@ -27,6 +27,7 @@ config BR2_TOOLCHAIN_USES_MUSL
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
select BR2_TOOLCHAIN_HAS_THREADS_NPTL
+ depends on !BR2_AARCH64_ILP32
choice
prompt "Toolchain type"
@@ -40,6 +41,7 @@ choice
config BR2_TOOLCHAIN_BUILDROOT
bool "Buildroot toolchain"
depends on !BR2_bfin
+ depends on !BR2_AARCH64_ILP32
select BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS
config BR2_TOOLCHAIN_EXTERNAL
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 0b45e12..7c58bf9 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -604,6 +604,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203
depends on BR2_sh4a || BR2_sh4aeb
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
+ depends on !BR2_AARCH64_ILP32
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
@@ -628,6 +629,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
depends on BR2_sh4a || BR2_sh4aeb
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
+ depends on !BR2_AARCH64_ILP32
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
@@ -814,6 +816,7 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
depends on BR2_aarch64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
+ depends on !BR2_AARCH64_ILP32
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
@@ -829,6 +832,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64
depends on BR2_aarch64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
+ depends on !BR2_AARCH64_ILP32
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
@@ -1078,69 +1082,86 @@ config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_16
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_15
bool "3.15.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_14
bool "3.14.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_13
bool "3.13.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_12
bool "3.12.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_11
bool "3.11.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10
bool "3.10.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_9
bool "3.9.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_9
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_8
bool "3.8.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_7
bool "3.7.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_6
bool "3.6.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_6
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_5
bool "3.5.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_4
bool "3.4.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_4
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_3
bool "3.3.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_2
bool "3.2.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_1
bool "3.1.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_0
bool "3.0.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0
+ depends on !BR2_AARCH64_ILP32
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_REALLY_OLD
bool "2.6.x"
+ depends on !BR2_AARCH64_ILP32
endchoice
@@ -1151,6 +1172,7 @@ choice
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
bool "uClibc"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
+ depends on !BR2_AARCH64_ILP32
# For the time being, we assume that all custom external
# toolchains have shadow password support.
select BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS
--
2.1.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [Buildroot] [PATCH V3 RESEND 5/5] aarch64: ilp32 defconfig examples
2015-08-13 1:16 [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Bamvor Jian Zhang
` (3 preceding siblings ...)
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 4/5] aarch64: ilp32: add ilp32 build config Bamvor Jian Zhang
@ 2015-08-13 1:16 ` Bamvor Jian Zhang
2016-01-16 15:25 ` [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Romain Naour
5 siblings, 0 replies; 18+ messages in thread
From: Bamvor Jian Zhang @ 2015-08-13 1:16 UTC (permalink / raw)
To: buildroot
From: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
DO NOT APPLY.
Test aarch64 lp64 through qemu_aarch64_virt_defconfig.
Test aarch64 ilp32, aarch64_be lp64, aarch64_be ilp32 through the
following config.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
---
configs/aarch64_be_defconfig | 2 ++
configs/aarch64_be_ilp32_defconfig | 8 ++++++++
configs/aarch64_ilp32_defconfig | 8 ++++++++
3 files changed, 18 insertions(+)
create mode 100644 configs/aarch64_be_defconfig
create mode 100644 configs/aarch64_be_ilp32_defconfig
create mode 100644 configs/aarch64_ilp32_defconfig
diff --git a/configs/aarch64_be_defconfig b/configs/aarch64_be_defconfig
new file mode 100644
index 0000000..6995953
--- /dev/null
+++ b/configs/aarch64_be_defconfig
@@ -0,0 +1,2 @@
+# Architecture
+BR2_aarch64_be=y
diff --git a/configs/aarch64_be_ilp32_defconfig b/configs/aarch64_be_ilp32_defconfig
new file mode 100644
index 0000000..6a2848a
--- /dev/null
+++ b/configs/aarch64_be_ilp32_defconfig
@@ -0,0 +1,8 @@
+# Architecture
+BR2_aarch64_be=y
+BR2_AARCH64_ILP32=y
+BR2_TOOLCHAIN_EXTERNAL_PATH="/path/to/your/toolchain"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="$(ARCH)-linux-gnu"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_16=y
+BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
diff --git a/configs/aarch64_ilp32_defconfig b/configs/aarch64_ilp32_defconfig
new file mode 100644
index 0000000..2b59806
--- /dev/null
+++ b/configs/aarch64_ilp32_defconfig
@@ -0,0 +1,8 @@
+# Architecture
+BR2_aarch64=y
+BR2_AARCH64_ILP32=y
+BR2_TOOLCHAIN_EXTERNAL_PATH="/home/bamvor/works/software/toolchain/gcc-linaro-4.9~git82c1251-aarch64_aarch64-ilp32-linux-gnu-20150310"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="$(ARCH)-ilp32-linux-gnu"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_16=y
+BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
--
2.1.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2015-08-13 1:16 [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Bamvor Jian Zhang
` (4 preceding siblings ...)
2015-08-13 1:16 ` [Buildroot] [PATCH V3 RESEND 5/5] aarch64: ilp32 defconfig examples Bamvor Jian Zhang
@ 2016-01-16 15:25 ` Romain Naour
2016-01-19 4:00 ` Bamvor Zhang Jian
5 siblings, 1 reply; 18+ messages in thread
From: Romain Naour @ 2016-01-16 15:25 UTC (permalink / raw)
To: buildroot
Hello Bamvor,
Le 13/08/2015 03:16, Bamvor Jian Zhang a ?crit :
> This is third version of my patches. This previous versions are
> here[1][2]. The previous discussion, Gustavo agree that only external
> toolchain is in consideration at this time. I will try to work on the
> buildroot toolchain after current series patch is upstreamed.
>
> ILP32 is very useful when the user want to migrate from arm 32bit to
> 64bit with minimal risk. There is almost no code changes after
> migration. ILP32 could get the better performance compare with arm
> 32bit (use 64bit register and instruction instead of 32bit one) and
> aarch64 LP64 (the default ABI in aarch64).
>
> Our test show that the performance of ILP32 is roughly 10% better than
> arm64 LP64 while the footprint is 86% of LP64. Because of these, It is
> useful for both embedded and enterprise system.
>
> Here is the details definition of ILP32:
> ILP32 is elf32 with aarch64 assembly and is compiled by 64bit compiler.
> Refer the following table:
>
> \- | arm 32bit | arm64 ILP32 | arm64 LP64
> ----------------|-------------|-------------|-------------
> instruction set | armv7-a | armv8-a | armv8-a
> int | 32bit | 32bit | 32bit
> long | 32bit | **32bit** | 64bit
> pointer | 32bit | **32bit** | 64bit
>
> LP64 is the default ABI on arm64(Implies -mabi=lp64 while compiling),
> and the kernel remains in LP64 no matter ILP32 enables or not.
>
> These series patches introduce the big endian support in aarch64 and
> then add ILP32 special filename and menuconfig step by step.
>
> The test of build is based on linaro kernel[3] and toolchain built by
> linaro ABE environment[4], anyone could built this toolchain through
> the simpile abe script.
>
> This is my first time I try to contribute the buildroot, feedback is
> very appreciated. Sorry if there are some coding style issues.
Thanks for this series and sorry for the long delay to reply...
I tried to build a aarch64 ilp32 toolchain using the current abe master but it
seems that ilp32 support is not mainline yet.
I'm not sure we want to modify the Buildroot external toolchain code to use an
"experimental" toolchain (origin/will/ilp32 branch).
Can you provide the command lines you used to build the toolchain ? on which abe
branch ? Otherwise we can't test your series.
Do you know if Linaro plans to release a ipl32 toolchain ?
Best regards,
Romain Naour
>
> changes since v2
> 1. rebase on the patch have been .
> "827ba46 aarch64: add big endian(aarch64_be) support"
> 2. Add "!BR2_aarch64_be" along with "!BR2_aarch64" in patch 1/5 according to
> the suggestion from Thomas.
> 3. Improve the ifeq in patch 2/5 according to Gustavo.
> 4. Do not pass invalid "-mabi" option to ld in patch 3/5 according to Gustavo.
>
> changes since v1
> 1. Avoid mabi issue in gcc 4.8 while build aarch64 lp64.
> 2. Change default libc, toolchain for ilp32 build.
> 3. Others changes suggested by Gustavo.
>
> [1] http://lists.busybox.net/pipermail/buildroot/2015-March/122115.html
> [2] http://lists.busybox.net/pipermail/buildroot/2015-March/122424.html
> [3] https://git.linaro.org/kernel/linux-linaro-tracking.git
> [4] https://wiki.linaro.org/ABE
>
>
> Bamvor Jian Zhang (5):
> aarch64: align aarch64_be config with aarch64s'
> aarch64: ilp32: handle special file name
> aarch64: ilp32: add ilp32 compiler and linker flags
> aarch64: ilp32: add ilp32 build config
> aarch64: ilp32 defconfig examples
>
> Makefile | 6 +++
> arch/Config.in.aarch64 | 36 ++++++++++++++++++
> configs/aarch64_be_defconfig | 2 +
> configs/aarch64_be_ilp32_defconfig | 8 ++++
> configs/aarch64_ilp32_defconfig | 8 ++++
> package/Makefile.in | 13 ++++++-
> package/binutils/Config.in | 4 +-
> package/binutils/Config.in.host | 5 ++-
> package/dropwatch/Config.in | 5 ++-
> package/gcc/Config.in.host | 11 +++---
> package/gdb/Config.in.host | 2 +-
> package/gpsd/Config.in | 2 +-
> package/lightning/Config.in | 5 ++-
> package/nginx/Config.in | 3 +-
> package/oprofile/Config.in | 6 ++-
> toolchain/Config.in | 2 +
> toolchain/helpers.mk | 5 ++-
> toolchain/toolchain-buildroot/Config.in | 7 ++--
> toolchain/toolchain-external/Config.in | 22 +++++++++++
> toolchain/toolchain-external/toolchain-external.mk | 44 +++++++++++++++++++++-
> 20 files changed, 169 insertions(+), 27 deletions(-)
> create mode 100644 configs/aarch64_be_defconfig
> create mode 100644 configs/aarch64_be_ilp32_defconfig
> create mode 100644 configs/aarch64_ilp32_defconfig
>
^ permalink raw reply [flat|nested] 18+ messages in thread* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-01-16 15:25 ` [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64 Romain Naour
@ 2016-01-19 4:00 ` Bamvor Zhang Jian
2016-01-20 21:26 ` Romain Naour
0 siblings, 1 reply; 18+ messages in thread
From: Bamvor Zhang Jian @ 2016-01-19 4:00 UTC (permalink / raw)
To: buildroot
Hi, Romain
On 01/16/2016 11:25 PM, Romain Naour wrote:
> Hello Bamvor,
>
> Le 13/08/2015 03:16, Bamvor Jian Zhang a ?crit :
>> This is third version of my patches. This previous versions are
>> here[1][2]. The previous discussion, Gustavo agree that only external
>> toolchain is in consideration at this time. I will try to work on the
>> buildroot toolchain after current series patch is upstreamed.
>>
>> ILP32 is very useful when the user want to migrate from arm 32bit to
>> 64bit with minimal risk. There is almost no code changes after
>> migration. ILP32 could get the better performance compare with arm
>> 32bit (use 64bit register and instruction instead of 32bit one) and
>> aarch64 LP64 (the default ABI in aarch64).
>>
>> Our test show that the performance of ILP32 is roughly 10% better than
>> arm64 LP64 while the footprint is 86% of LP64. Because of these, It is
>> useful for both embedded and enterprise system.
>>
>> Here is the details definition of ILP32:
>> ILP32 is elf32 with aarch64 assembly and is compiled by 64bit compiler.
>> Refer the following table:
>>
>> \- | arm 32bit | arm64 ILP32 | arm64 LP64
>> ----------------|-------------|-------------|-------------
>> instruction set | armv7-a | armv8-a | armv8-a
>> int | 32bit | 32bit | 32bit
>> long | 32bit | **32bit** | 64bit
>> pointer | 32bit | **32bit** | 64bit
>>
>> LP64 is the default ABI on arm64(Implies -mabi=lp64 while compiling),
>> and the kernel remains in LP64 no matter ILP32 enables or not.
>>
>> These series patches introduce the big endian support in aarch64 and
>> then add ILP32 special filename and menuconfig step by step.
>>
>> The test of build is based on linaro kernel[3] and toolchain built by
>> linaro ABE environment[4], anyone could built this toolchain through
>> the simpile abe script.
>>
>> This is my first time I try to contribute the buildroot, feedback is
>> very appreciated. Sorry if there are some coding style issues.
>
> Thanks for this series and sorry for the long delay to reply...
>
> I tried to build a aarch64 ilp32 toolchain using the current abe master but it
> seems that ilp32 support is not mainline yet.
> I'm not sure we want to modify the Buildroot external toolchain code to use an
> "experimental" toolchain (origin/will/ilp32 branch).
>
> Can you provide the command lines you used to build the toolchain ? on which abe
> branch ? Otherwise we can't test your series.
You could find the toolchain here[1]
>
> Do you know if Linaro plans to release a ipl32 toolchain ?
It seems that linaro will not release it before patches for ilp32 of kernel and
glibc upstreamed.
Here[2] is a status for ilp32 in linaro.
Regards
Bamvor
[1] http://people.linaro.org/~maxim.kuvyrkov/bench-ilp32/
[2] https://wiki.linaro.org/Platform/arm64-ilp32
> Best regards,
> Romain Naour
>
>>
>> changes since v2
>> 1. rebase on the patch have been .
>> "827ba46 aarch64: add big endian(aarch64_be) support"
>> 2. Add "!BR2_aarch64_be" along with "!BR2_aarch64" in patch 1/5 according to
>> the suggestion from Thomas.
>> 3. Improve the ifeq in patch 2/5 according to Gustavo.
>> 4. Do not pass invalid "-mabi" option to ld in patch 3/5 according to Gustavo.
>>
>> changes since v1
>> 1. Avoid mabi issue in gcc 4.8 while build aarch64 lp64.
>> 2. Change default libc, toolchain for ilp32 build.
>> 3. Others changes suggested by Gustavo.
>>
>> [1] http://lists.busybox.net/pipermail/buildroot/2015-March/122115.html
>> [2] http://lists.busybox.net/pipermail/buildroot/2015-March/122424.html
>> [3] https://git.linaro.org/kernel/linux-linaro-tracking.git
>> [4] https://wiki.linaro.org/ABE
>>
>>
>> Bamvor Jian Zhang (5):
>> aarch64: align aarch64_be config with aarch64s'
>> aarch64: ilp32: handle special file name
>> aarch64: ilp32: add ilp32 compiler and linker flags
>> aarch64: ilp32: add ilp32 build config
>> aarch64: ilp32 defconfig examples
>>
>> Makefile | 6 +++
>> arch/Config.in.aarch64 | 36 ++++++++++++++++++
>> configs/aarch64_be_defconfig | 2 +
>> configs/aarch64_be_ilp32_defconfig | 8 ++++
>> configs/aarch64_ilp32_defconfig | 8 ++++
>> package/Makefile.in | 13 ++++++-
>> package/binutils/Config.in | 4 +-
>> package/binutils/Config.in.host | 5 ++-
>> package/dropwatch/Config.in | 5 ++-
>> package/gcc/Config.in.host | 11 +++---
>> package/gdb/Config.in.host | 2 +-
>> package/gpsd/Config.in | 2 +-
>> package/lightning/Config.in | 5 ++-
>> package/nginx/Config.in | 3 +-
>> package/oprofile/Config.in | 6 ++-
>> toolchain/Config.in | 2 +
>> toolchain/helpers.mk | 5 ++-
>> toolchain/toolchain-buildroot/Config.in | 7 ++--
>> toolchain/toolchain-external/Config.in | 22 +++++++++++
>> toolchain/toolchain-external/toolchain-external.mk | 44 +++++++++++++++++++++-
>> 20 files changed, 169 insertions(+), 27 deletions(-)
>> create mode 100644 configs/aarch64_be_defconfig
>> create mode 100644 configs/aarch64_be_ilp32_defconfig
>> create mode 100644 configs/aarch64_ilp32_defconfig
>>
>
--
-----------------------------
blog: http://aarch64.me
-----------------------------
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-01-19 4:00 ` Bamvor Zhang Jian
@ 2016-01-20 21:26 ` Romain Naour
2016-01-21 9:03 ` Bamvor Zhang Jian
0 siblings, 1 reply; 18+ messages in thread
From: Romain Naour @ 2016-01-20 21:26 UTC (permalink / raw)
To: buildroot
Hi Bamvor,
Le 19/01/2016 05:00, Bamvor Zhang Jian a ?crit :
> Hi, Romain
>
> On 01/16/2016 11:25 PM, Romain Naour wrote:
>> Hello Bamvor,
>>
>> Le 13/08/2015 03:16, Bamvor Jian Zhang a ?crit :
>>> This is third version of my patches. This previous versions are
>>> here[1][2]. The previous discussion, Gustavo agree that only external
>>> toolchain is in consideration at this time. I will try to work on the
>>> buildroot toolchain after current series patch is upstreamed.
>>>
>>> ILP32 is very useful when the user want to migrate from arm 32bit to
>>> 64bit with minimal risk. There is almost no code changes after
>>> migration. ILP32 could get the better performance compare with arm
>>> 32bit (use 64bit register and instruction instead of 32bit one) and
>>> aarch64 LP64 (the default ABI in aarch64).
>>>
>>> Our test show that the performance of ILP32 is roughly 10% better than
>>> arm64 LP64 while the footprint is 86% of LP64. Because of these, It is
>>> useful for both embedded and enterprise system.
>>>
>>> Here is the details definition of ILP32:
>>> ILP32 is elf32 with aarch64 assembly and is compiled by 64bit compiler.
>>> Refer the following table:
>>>
>>> \- | arm 32bit | arm64 ILP32 | arm64 LP64
>>> ----------------|-------------|-------------|-------------
>>> instruction set | armv7-a | armv8-a | armv8-a
>>> int | 32bit | 32bit | 32bit
>>> long | 32bit | **32bit** | 64bit
>>> pointer | 32bit | **32bit** | 64bit
>>>
>>> LP64 is the default ABI on arm64(Implies -mabi=lp64 while compiling),
>>> and the kernel remains in LP64 no matter ILP32 enables or not.
>>>
>>> These series patches introduce the big endian support in aarch64 and
>>> then add ILP32 special filename and menuconfig step by step.
>>>
>>> The test of build is based on linaro kernel[3] and toolchain built by
>>> linaro ABE environment[4], anyone could built this toolchain through
>>> the simpile abe script.
>>>
>>> This is my first time I try to contribute the buildroot, feedback is
>>> very appreciated. Sorry if there are some coding style issues.
>>
>> Thanks for this series and sorry for the long delay to reply...
>>
>> I tried to build a aarch64 ilp32 toolchain using the current abe master but it
>> seems that ilp32 support is not mainline yet.
>> I'm not sure we want to modify the Buildroot external toolchain code to use an
>> "experimental" toolchain (origin/will/ilp32 branch).
>>
>> Can you provide the command lines you used to build the toolchain ? on which abe
>> branch ? Otherwise we can't test your series.
> You could find the toolchain here[1]
Thanks but this is not a cross-toolchain:
file bin/aarch64-ilp32-linux-gnu-gcc
bin/aarch64-ilp32-linux-gnu-gcc: ELF 64-bit LSB executable, ARM aarch64, version
1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for
GNU/Linux 3.7.0, BuildID[sha1]=0727b9d5c173c83568f5d19cfc87a05540ec8b77, not
stripped
It seems that's a native toolchain.
It should be something like (from aarch64-linaro 2015.08)
file bin/aarch64-linux-gnu-gcc
bin/aarch64-linux-gnu-gcc: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
2.6.32, BuildID[sha1]=91a19539d0f6b0f38d599db648b4b5760000666a, not stripped
Can you provide a pre-build toolchain or a recipe to rebuild a aarch64 ipl32
toolchain ?
>>
>> Do you know if Linaro plans to release a ipl32 toolchain ?
> It seems that linaro will not release it before patches for ilp32 of kernel and
> glibc upstreamed.
> Here[2] is a status for ilp32 in linaro.
Thanks for the link.
Best regards,
Romain
>
> Regards
>
> Bamvor
>
> [1] http://people.linaro.org/~maxim.kuvyrkov/bench-ilp32/
> [2] https://wiki.linaro.org/Platform/arm64-ilp32
>
>> Best regards,
>> Romain Naour
>>
>>>
>>> changes since v2
>>> 1. rebase on the patch have been .
>>> "827ba46 aarch64: add big endian(aarch64_be) support"
>>> 2. Add "!BR2_aarch64_be" along with "!BR2_aarch64" in patch 1/5 according to
>>> the suggestion from Thomas.
>>> 3. Improve the ifeq in patch 2/5 according to Gustavo.
>>> 4. Do not pass invalid "-mabi" option to ld in patch 3/5 according to Gustavo.
>>>
>>> changes since v1
>>> 1. Avoid mabi issue in gcc 4.8 while build aarch64 lp64.
>>> 2. Change default libc, toolchain for ilp32 build.
>>> 3. Others changes suggested by Gustavo.
>>>
>>> [1] http://lists.busybox.net/pipermail/buildroot/2015-March/122115.html
>>> [2] http://lists.busybox.net/pipermail/buildroot/2015-March/122424.html
>>> [3] https://git.linaro.org/kernel/linux-linaro-tracking.git
>>> [4] https://wiki.linaro.org/ABE
>>>
>>>
>>> Bamvor Jian Zhang (5):
>>> aarch64: align aarch64_be config with aarch64s'
>>> aarch64: ilp32: handle special file name
>>> aarch64: ilp32: add ilp32 compiler and linker flags
>>> aarch64: ilp32: add ilp32 build config
>>> aarch64: ilp32 defconfig examples
>>>
>>> Makefile | 6 +++
>>> arch/Config.in.aarch64 | 36 ++++++++++++++++++
>>> configs/aarch64_be_defconfig | 2 +
>>> configs/aarch64_be_ilp32_defconfig | 8 ++++
>>> configs/aarch64_ilp32_defconfig | 8 ++++
>>> package/Makefile.in | 13 ++++++-
>>> package/binutils/Config.in | 4 +-
>>> package/binutils/Config.in.host | 5 ++-
>>> package/dropwatch/Config.in | 5 ++-
>>> package/gcc/Config.in.host | 11 +++---
>>> package/gdb/Config.in.host | 2 +-
>>> package/gpsd/Config.in | 2 +-
>>> package/lightning/Config.in | 5 ++-
>>> package/nginx/Config.in | 3 +-
>>> package/oprofile/Config.in | 6 ++-
>>> toolchain/Config.in | 2 +
>>> toolchain/helpers.mk | 5 ++-
>>> toolchain/toolchain-buildroot/Config.in | 7 ++--
>>> toolchain/toolchain-external/Config.in | 22 +++++++++++
>>> toolchain/toolchain-external/toolchain-external.mk | 44 +++++++++++++++++++++-
>>> 20 files changed, 169 insertions(+), 27 deletions(-)
>>> create mode 100644 configs/aarch64_be_defconfig
>>> create mode 100644 configs/aarch64_be_ilp32_defconfig
>>> create mode 100644 configs/aarch64_ilp32_defconfig
>>>
>>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-01-20 21:26 ` Romain Naour
@ 2016-01-21 9:03 ` Bamvor Zhang Jian
2016-01-24 11:35 ` Romain Naour
0 siblings, 1 reply; 18+ messages in thread
From: Bamvor Zhang Jian @ 2016-01-21 9:03 UTC (permalink / raw)
To: buildroot
Hi, Romain
On 01/21/2016 05:26 AM, Romain Naour wrote:
> Hi Bamvor,
>
> Le 19/01/2016 05:00, Bamvor Zhang Jian a ?crit :
>> Hi, Romain
>>
>> On 01/16/2016 11:25 PM, Romain Naour wrote:
>>> Hello Bamvor,
[...]
>>> Can you provide the command lines you used to build the toolchain ? on which abe
>>> branch ? Otherwise we can't test your series.
>> You could find the toolchain here[1]
>
> Thanks but this is not a cross-toolchain:
>
> file bin/aarch64-ilp32-linux-gnu-gcc
> bin/aarch64-ilp32-linux-gnu-gcc: ELF 64-bit LSB executable, ARM aarch64, version
> 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for
> GNU/Linux 3.7.0, BuildID[sha1]=0727b9d5c173c83568f5d19cfc87a05540ec8b77, not
> stripped
>
> It seems that's a native toolchain.
>
> It should be something like (from aarch64-linaro 2015.08)
> file bin/aarch64-linux-gnu-gcc
> bin/aarch64-linux-gnu-gcc: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
> dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
> 2.6.32, BuildID[sha1]=91a19539d0f6b0f38d599db648b4b5760000666a, not stripped
>
Yeap, it is not a cross compile. I use it in an aarch64 chroot environment in
x86. I feel it is enough to test these patches.
> Can you provide a pre-build toolchain or a recipe to rebuild a aarch64 ipl32
> toolchain ?
Linaro provide abe[1] to build toochain. You could follow this script[2] to know
how to use it. It seems that the server in tcwg is down. Hope, you could make
use of the method used by abe system.
Regards
Bamvor
[1] https://git.linaro.org/toolchain/abe.git/blob/refs/heads/benchmarking:/abe.sh
[2] https://git.linaro.org/toolchain/spec2xxx-utils.git/blob/refs/heads/test:/bench-ilp32.sh
>>>
>>> Do you know if Linaro plans to release a ipl32 toolchain ?
>> It seems that linaro will not release it before patches for ilp32 of kernel and
>> glibc upstreamed.
>> Here[2] is a status for ilp32 in linaro.
>
> Thanks for the link.
>
> Best regards,
> Romain
>
>>
>> Regards
>>
>> Bamvor
>>
>> [1] http://people.linaro.org/~maxim.kuvyrkov/bench-ilp32/
>> [2] https://wiki.linaro.org/Platform/arm64-ilp32
>>
>>> Best regards,
>>> Romain Naour
>>>
>>>>
>>>> changes since v2
>>>> 1. rebase on the patch have been .
>>>> "827ba46 aarch64: add big endian(aarch64_be) support"
>>>> 2. Add "!BR2_aarch64_be" along with "!BR2_aarch64" in patch 1/5 according to
>>>> the suggestion from Thomas.
>>>> 3. Improve the ifeq in patch 2/5 according to Gustavo.
>>>> 4. Do not pass invalid "-mabi" option to ld in patch 3/5 according to Gustavo.
>>>>
>>>> changes since v1
>>>> 1. Avoid mabi issue in gcc 4.8 while build aarch64 lp64.
>>>> 2. Change default libc, toolchain for ilp32 build.
>>>> 3. Others changes suggested by Gustavo.
>>>>
>>>> [1] http://lists.busybox.net/pipermail/buildroot/2015-March/122115.html
>>>> [2] http://lists.busybox.net/pipermail/buildroot/2015-March/122424.html
>>>> [3] https://git.linaro.org/kernel/linux-linaro-tracking.git
>>>> [4] https://wiki.linaro.org/ABE
>>>>
>>>>
>>>> Bamvor Jian Zhang (5):
>>>> aarch64: align aarch64_be config with aarch64s'
>>>> aarch64: ilp32: handle special file name
>>>> aarch64: ilp32: add ilp32 compiler and linker flags
>>>> aarch64: ilp32: add ilp32 build config
>>>> aarch64: ilp32 defconfig examples
>>>>
>>>> Makefile | 6 +++
>>>> arch/Config.in.aarch64 | 36 ++++++++++++++++++
>>>> configs/aarch64_be_defconfig | 2 +
>>>> configs/aarch64_be_ilp32_defconfig | 8 ++++
>>>> configs/aarch64_ilp32_defconfig | 8 ++++
>>>> package/Makefile.in | 13 ++++++-
>>>> package/binutils/Config.in | 4 +-
>>>> package/binutils/Config.in.host | 5 ++-
>>>> package/dropwatch/Config.in | 5 ++-
>>>> package/gcc/Config.in.host | 11 +++---
>>>> package/gdb/Config.in.host | 2 +-
>>>> package/gpsd/Config.in | 2 +-
>>>> package/lightning/Config.in | 5 ++-
>>>> package/nginx/Config.in | 3 +-
>>>> package/oprofile/Config.in | 6 ++-
>>>> toolchain/Config.in | 2 +
>>>> toolchain/helpers.mk | 5 ++-
>>>> toolchain/toolchain-buildroot/Config.in | 7 ++--
>>>> toolchain/toolchain-external/Config.in | 22 +++++++++++
>>>> toolchain/toolchain-external/toolchain-external.mk | 44 +++++++++++++++++++++-
>>>> 20 files changed, 169 insertions(+), 27 deletions(-)
>>>> create mode 100644 configs/aarch64_be_defconfig
>>>> create mode 100644 configs/aarch64_be_ilp32_defconfig
>>>> create mode 100644 configs/aarch64_ilp32_defconfig
>>>>
>>>
>>
--
-----------------------------
blog: http://aarch64.me
-----------------------------
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-01-21 9:03 ` Bamvor Zhang Jian
@ 2016-01-24 11:35 ` Romain Naour
2016-02-02 2:29 ` Zhangjian
0 siblings, 1 reply; 18+ messages in thread
From: Romain Naour @ 2016-01-24 11:35 UTC (permalink / raw)
To: buildroot
Hi Bamvor,
Le 21/01/2016 10:03, Bamvor Zhang Jian a ?crit :
> Hi, Romain
>
> On 01/21/2016 05:26 AM, Romain Naour wrote:
>> Hi Bamvor,
>>
>> Le 19/01/2016 05:00, Bamvor Zhang Jian a ?crit :
>>> Hi, Romain
>>>
>>> On 01/16/2016 11:25 PM, Romain Naour wrote:
>>>> Hello Bamvor,
> [...]
>>>> Can you provide the command lines you used to build the toolchain ? on which abe
>>>> branch ? Otherwise we can't test your series.
>>> You could find the toolchain here[1]
>>
>> Thanks but this is not a cross-toolchain:
>>
>> file bin/aarch64-ilp32-linux-gnu-gcc
>> bin/aarch64-ilp32-linux-gnu-gcc: ELF 64-bit LSB executable, ARM aarch64, version
>> 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for
>> GNU/Linux 3.7.0, BuildID[sha1]=0727b9d5c173c83568f5d19cfc87a05540ec8b77, not
>> stripped
>>
>> It seems that's a native toolchain.
>>
>> It should be something like (from aarch64-linaro 2015.08)
>> file bin/aarch64-linux-gnu-gcc
>> bin/aarch64-linux-gnu-gcc: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
>> dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
>> 2.6.32, BuildID[sha1]=91a19539d0f6b0f38d599db648b4b5760000666a, not stripped
>>
> Yeap, it is not a cross compile. I use it in an aarch64 chroot environment in
> x86. I feel it is enough to test these patches.
Buildroot is a tool for cross-compiling, you know it ;-)
Honestly I'm not very interested to test the toolchain by itself, only your
patches for the external toolchain infra.
>> Can you provide a pre-build toolchain or a recipe to rebuild a aarch64 ipl32
>> toolchain ?
> Linaro provide abe[1] to build toochain. You could follow this script[2] to know
> how to use it. It seems that the server in tcwg is down. Hope, you could make
> use of the method used by abe system.
I really tried to build a aarch64 ipl32 cross-toolchain with abe but I'm stuck
with glibc build. I don't know what's the glibc branch I should use.
By default I used the release/2.20/master branch
aarch64-ilp32-linux-gnu-gcc -mabi=ilp32 -nostdlib -nostartfiles -r -o
/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/Scrt1.o
/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.os
/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/abi-note.o
/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/init.o
../sysdeps/aarch64/start.S: Assembler messages:
../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
in this object file format
../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
in this object file format
../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
in this object file format
/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/sysd-rules:1345:
recipe for target
'/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.o'
failed
make[2]: ***
[/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.o]
Error 1
Also I had several issue with the abe script on my system (Fedora) and I had to
modify some part of the script to be able to continue the build.
So, It would be great if you can provide a precompiled cross-toolchain.
Best regards,
Romain
>
> Regards
>
> Bamvor
>
> [1] https://git.linaro.org/toolchain/abe.git/blob/refs/heads/benchmarking:/abe.sh
> [2] https://git.linaro.org/toolchain/spec2xxx-utils.git/blob/refs/heads/test:/bench-ilp32.sh
>
>>>>
>>>> Do you know if Linaro plans to release a ipl32 toolchain ?
>>> It seems that linaro will not release it before patches for ilp32 of kernel and
>>> glibc upstreamed.
>>> Here[2] is a status for ilp32 in linaro.
>>
>> Thanks for the link.
>>
>> Best regards,
>> Romain
>>
>>>
>>> Regards
>>>
>>> Bamvor
>>>
>>> [1] http://people.linaro.org/~maxim.kuvyrkov/bench-ilp32/
>>> [2] https://wiki.linaro.org/Platform/arm64-ilp32
>>>
>>>> Best regards,
>>>> Romain Naour
>>>>
>>>>>
>>>>> changes since v2
>>>>> 1. rebase on the patch have been .
>>>>> "827ba46 aarch64: add big endian(aarch64_be) support"
>>>>> 2. Add "!BR2_aarch64_be" along with "!BR2_aarch64" in patch 1/5 according to
>>>>> the suggestion from Thomas.
>>>>> 3. Improve the ifeq in patch 2/5 according to Gustavo.
>>>>> 4. Do not pass invalid "-mabi" option to ld in patch 3/5 according to Gustavo.
>>>>>
>>>>> changes since v1
>>>>> 1. Avoid mabi issue in gcc 4.8 while build aarch64 lp64.
>>>>> 2. Change default libc, toolchain for ilp32 build.
>>>>> 3. Others changes suggested by Gustavo.
>>>>>
>>>>> [1] http://lists.busybox.net/pipermail/buildroot/2015-March/122115.html
>>>>> [2] http://lists.busybox.net/pipermail/buildroot/2015-March/122424.html
>>>>> [3] https://git.linaro.org/kernel/linux-linaro-tracking.git
>>>>> [4] https://wiki.linaro.org/ABE
>>>>>
>>>>>
>>>>> Bamvor Jian Zhang (5):
>>>>> aarch64: align aarch64_be config with aarch64s'
>>>>> aarch64: ilp32: handle special file name
>>>>> aarch64: ilp32: add ilp32 compiler and linker flags
>>>>> aarch64: ilp32: add ilp32 build config
>>>>> aarch64: ilp32 defconfig examples
>>>>>
>>>>> Makefile | 6 +++
>>>>> arch/Config.in.aarch64 | 36 ++++++++++++++++++
>>>>> configs/aarch64_be_defconfig | 2 +
>>>>> configs/aarch64_be_ilp32_defconfig | 8 ++++
>>>>> configs/aarch64_ilp32_defconfig | 8 ++++
>>>>> package/Makefile.in | 13 ++++++-
>>>>> package/binutils/Config.in | 4 +-
>>>>> package/binutils/Config.in.host | 5 ++-
>>>>> package/dropwatch/Config.in | 5 ++-
>>>>> package/gcc/Config.in.host | 11 +++---
>>>>> package/gdb/Config.in.host | 2 +-
>>>>> package/gpsd/Config.in | 2 +-
>>>>> package/lightning/Config.in | 5 ++-
>>>>> package/nginx/Config.in | 3 +-
>>>>> package/oprofile/Config.in | 6 ++-
>>>>> toolchain/Config.in | 2 +
>>>>> toolchain/helpers.mk | 5 ++-
>>>>> toolchain/toolchain-buildroot/Config.in | 7 ++--
>>>>> toolchain/toolchain-external/Config.in | 22 +++++++++++
>>>>> toolchain/toolchain-external/toolchain-external.mk | 44 +++++++++++++++++++++-
>>>>> 20 files changed, 169 insertions(+), 27 deletions(-)
>>>>> create mode 100644 configs/aarch64_be_defconfig
>>>>> create mode 100644 configs/aarch64_be_ilp32_defconfig
>>>>> create mode 100644 configs/aarch64_ilp32_defconfig
>>>>>
>>>>
>>>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-01-24 11:35 ` Romain Naour
@ 2016-02-02 2:29 ` Zhangjian
2016-02-02 9:04 ` Romain Naour
0 siblings, 1 reply; 18+ messages in thread
From: Zhangjian @ 2016-02-02 2:29 UTC (permalink / raw)
To: buildroot
Hi, Romain
On 2016/1/24 19:35, Romain Naour wrote:
> Hi Bamvor,
>
> Le 21/01/2016 10:03, Bamvor Zhang Jian a ?crit :
>> Hi, Romain
>>
>> On 01/21/2016 05:26 AM, Romain Naour wrote:
>>> Hi Bamvor,
>>>
>>> Le 19/01/2016 05:00, Bamvor Zhang Jian a ?crit :
>>>> Hi, Romain
>>>>
>>>> On 01/16/2016 11:25 PM, Romain Naour wrote:
>>>>> Hello Bamvor,
>> [...]
>>>>> Can you provide the command lines you used to build the toolchain ? on which abe
>>>>> branch ? Otherwise we can't test your series.
>>>> You could find the toolchain here[1]
>>>
>>> Thanks but this is not a cross-toolchain:
>>>
>>> file bin/aarch64-ilp32-linux-gnu-gcc
>>> bin/aarch64-ilp32-linux-gnu-gcc: ELF 64-bit LSB executable, ARM aarch64, version
>>> 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for
>>> GNU/Linux 3.7.0, BuildID[sha1]=0727b9d5c173c83568f5d19cfc87a05540ec8b77, not
>>> stripped
>>>
>>> It seems that's a native toolchain.
>>>
>>> It should be something like (from aarch64-linaro 2015.08)
>>> file bin/aarch64-linux-gnu-gcc
>>> bin/aarch64-linux-gnu-gcc: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
>>> dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
>>> 2.6.32, BuildID[sha1]=91a19539d0f6b0f38d599db648b4b5760000666a, not stripped
>>>
>> Yeap, it is not a cross compile. I use it in an aarch64 chroot environment in
>> x86. I feel it is enough to test these patches.
>
> Buildroot is a tool for cross-compiling, you know it ;-)
> Honestly I'm not very interested to test the toolchain by itself, only your
> patches for the external toolchain infra.
>
>>> Can you provide a pre-build toolchain or a recipe to rebuild a aarch64 ipl32
>>> toolchain ?
>> Linaro provide abe[1] to build toochain. You could follow this script[2] to know
>> how to use it. It seems that the server in tcwg is down. Hope, you could make
>> use of the method used by abe system.
>
> I really tried to build a aarch64 ipl32 cross-toolchain with abe but I'm stuck
> with glibc build. I don't know what's the glibc branch I should use.
> By default I used the release/2.20/master branch
>
> aarch64-ilp32-linux-gnu-gcc -mabi=ilp32 -nostdlib -nostartfiles -r -o
> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/Scrt1.o
> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.os
> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/abi-note.o
> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/init.o
> ../sysdeps/aarch64/start.S: Assembler messages:
> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
> in this object file format
> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
> in this object file format
> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
> in this object file format
> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/sysd-rules:1345:
> recipe for target
> '/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.o'
> failed
> make[2]: ***
> [/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.o]
> Error 1
You could this glibc[1]. IIRC, It is for patch v6 rfc2. We are planning to update it for patch v6 rfc5.
Regards
Bamvor
[1] https://github.com/norov/glibc/tree/thunderx-ilp32-32time_toff_t
>
> Also I had several issue with the abe script on my system (Fedora) and I had to
> modify some part of the script to be able to continue the build.
>
> So, It would be great if you can provide a precompiled cross-toolchain.
>
> Best regards,
> Romain
>
>>
>> Regards
>>
>> Bamvor
>>
>> [1] https://git.linaro.org/toolchain/abe.git/blob/refs/heads/benchmarking:/abe.sh
>> [2] https://git.linaro.org/toolchain/spec2xxx-utils.git/blob/refs/heads/test:/bench-ilp32.sh
>>
>>>>>
>>>>> Do you know if Linaro plans to release a ipl32 toolchain ?
>>>> It seems that linaro will not release it before patches for ilp32 of kernel and
>>>> glibc upstreamed.
>>>> Here[2] is a status for ilp32 in linaro.
>>>
>>> Thanks for the link.
>>>
>>> Best regards,
>>> Romain
>>>
>>>>
>>>> Regards
>>>>
>>>> Bamvor
>>>>
>>>> [1] http://people.linaro.org/~maxim.kuvyrkov/bench-ilp32/
>>>> [2] https://wiki.linaro.org/Platform/arm64-ilp32
>>>>
>>>>> Best regards,
>>>>> Romain Naour
>>>>>
>>>>>>
>>>>>> changes since v2
>>>>>> 1. rebase on the patch have been .
>>>>>> "827ba46 aarch64: add big endian(aarch64_be) support"
>>>>>> 2. Add "!BR2_aarch64_be" along with "!BR2_aarch64" in patch 1/5 according to
>>>>>> the suggestion from Thomas.
>>>>>> 3. Improve the ifeq in patch 2/5 according to Gustavo.
>>>>>> 4. Do not pass invalid "-mabi" option to ld in patch 3/5 according to Gustavo.
>>>>>>
>>>>>> changes since v1
>>>>>> 1. Avoid mabi issue in gcc 4.8 while build aarch64 lp64.
>>>>>> 2. Change default libc, toolchain for ilp32 build.
>>>>>> 3. Others changes suggested by Gustavo.
>>>>>>
>>>>>> [1] http://lists.busybox.net/pipermail/buildroot/2015-March/122115.html
>>>>>> [2] http://lists.busybox.net/pipermail/buildroot/2015-March/122424.html
>>>>>> [3] https://git.linaro.org/kernel/linux-linaro-tracking.git
>>>>>> [4] https://wiki.linaro.org/ABE
>>>>>>
>>>>>>
>>>>>> Bamvor Jian Zhang (5):
>>>>>> aarch64: align aarch64_be config with aarch64s'
>>>>>> aarch64: ilp32: handle special file name
>>>>>> aarch64: ilp32: add ilp32 compiler and linker flags
>>>>>> aarch64: ilp32: add ilp32 build config
>>>>>> aarch64: ilp32 defconfig examples
>>>>>>
>>>>>> Makefile | 6 +++
>>>>>> arch/Config.in.aarch64 | 36 ++++++++++++++++++
>>>>>> configs/aarch64_be_defconfig | 2 +
>>>>>> configs/aarch64_be_ilp32_defconfig | 8 ++++
>>>>>> configs/aarch64_ilp32_defconfig | 8 ++++
>>>>>> package/Makefile.in | 13 ++++++-
>>>>>> package/binutils/Config.in | 4 +-
>>>>>> package/binutils/Config.in.host | 5 ++-
>>>>>> package/dropwatch/Config.in | 5 ++-
>>>>>> package/gcc/Config.in.host | 11 +++---
>>>>>> package/gdb/Config.in.host | 2 +-
>>>>>> package/gpsd/Config.in | 2 +-
>>>>>> package/lightning/Config.in | 5 ++-
>>>>>> package/nginx/Config.in | 3 +-
>>>>>> package/oprofile/Config.in | 6 ++-
>>>>>> toolchain/Config.in | 2 +
>>>>>> toolchain/helpers.mk | 5 ++-
>>>>>> toolchain/toolchain-buildroot/Config.in | 7 ++--
>>>>>> toolchain/toolchain-external/Config.in | 22 +++++++++++
>>>>>> toolchain/toolchain-external/toolchain-external.mk | 44 +++++++++++++++++++++-
>>>>>> 20 files changed, 169 insertions(+), 27 deletions(-)
>>>>>> create mode 100644 configs/aarch64_be_defconfig
>>>>>> create mode 100644 configs/aarch64_be_ilp32_defconfig
>>>>>> create mode 100644 configs/aarch64_ilp32_defconfig
>>>>>>
>>>>>
>>>>
>>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-02-02 2:29 ` Zhangjian
@ 2016-02-02 9:04 ` Romain Naour
2016-02-02 10:49 ` Zhangjian
0 siblings, 1 reply; 18+ messages in thread
From: Romain Naour @ 2016-02-02 9:04 UTC (permalink / raw)
To: buildroot
Hi Bamvor,
Le 02/02/2016 03:29, Zhangjian (Bamvor) a ?crit :
> Hi, Romain
>
>
> On 2016/1/24 19:35, Romain Naour wrote:
>> Hi Bamvor,
>>
>> Le 21/01/2016 10:03, Bamvor Zhang Jian a ?crit :
>>> Hi, Romain
>>>
>>> On 01/21/2016 05:26 AM, Romain Naour wrote:
>>>> Hi Bamvor,
>>>>
>>>> Le 19/01/2016 05:00, Bamvor Zhang Jian a ?crit :
>>>>> Hi, Romain
>>>>>
>>>>> On 01/16/2016 11:25 PM, Romain Naour wrote:
>>>>>> Hello Bamvor,
>>> [...]
>>>>>> Can you provide the command lines you used to build the toolchain ? on
>>>>>> which abe
>>>>>> branch ? Otherwise we can't test your series.
>>>>> You could find the toolchain here[1]
>>>>
>>>> Thanks but this is not a cross-toolchain:
>>>>
>>>> file bin/aarch64-ilp32-linux-gnu-gcc
>>>> bin/aarch64-ilp32-linux-gnu-gcc: ELF 64-bit LSB executable, ARM aarch64,
>>>> version
>>>> 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for
>>>> GNU/Linux 3.7.0, BuildID[sha1]=0727b9d5c173c83568f5d19cfc87a05540ec8b77, not
>>>> stripped
>>>>
>>>> It seems that's a native toolchain.
>>>>
>>>> It should be something like (from aarch64-linaro 2015.08)
>>>> file bin/aarch64-linux-gnu-gcc
>>>> bin/aarch64-linux-gnu-gcc: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
>>>> dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
>>>> 2.6.32, BuildID[sha1]=91a19539d0f6b0f38d599db648b4b5760000666a, not stripped
>>>>
>>> Yeap, it is not a cross compile. I use it in an aarch64 chroot environment in
>>> x86. I feel it is enough to test these patches.
>>
>> Buildroot is a tool for cross-compiling, you know it ;-)
>> Honestly I'm not very interested to test the toolchain by itself, only your
>> patches for the external toolchain infra.
>>
>>>> Can you provide a pre-build toolchain or a recipe to rebuild a aarch64 ipl32
>>>> toolchain ?
>>> Linaro provide abe[1] to build toochain. You could follow this script[2] to know
>>> how to use it. It seems that the server in tcwg is down. Hope, you could make
>>> use of the method used by abe system.
>>
>> I really tried to build a aarch64 ipl32 cross-toolchain with abe but I'm stuck
>> with glibc build. I don't know what's the glibc branch I should use.
>> By default I used the release/2.20/master branch
>>
>> aarch64-ilp32-linux-gnu-gcc -mabi=ilp32 -nostdlib -nostartfiles -r -o
>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/Scrt1.o
>>
>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.os
>>
>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/abi-note.o
>>
>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/init.o
>>
>> ../sysdeps/aarch64/start.S: Assembler messages:
>> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
>> in this object file format
>> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
>> in this object file format
>> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
>> in this object file format
>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/sysd-rules:1345:
>>
>> recipe for target
>> '/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.o'
>>
>> failed
>> make[2]: ***
>> [/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.o]
>>
>> Error 1
> You could this glibc[1]. IIRC, It is for patch v6 rfc2. We are planning to
> update it for patch v6 rfc5.
Thanks for this link.
To be honest, I don't think this series will be merged as is until a stable
toolchain release is made. When it's done, can you respin your series on top of
master since the toolchain-external code has been updated recently ?
Best regards,
Romain
>
> Regards
>
> Bamvor
>
>
> [1] https://github.com/norov/glibc/tree/thunderx-ilp32-32time_toff_t
>>
>> Also I had several issue with the abe script on my system (Fedora) and I had to
>> modify some part of the script to be able to continue the build.
>>
>> So, It would be great if you can provide a precompiled cross-toolchain.
>>
>> Best regards,
>> Romain
>>
>>>
>>> Regards
>>>
>>> Bamvor
>>>
>>> [1]
>>> https://git.linaro.org/toolchain/abe.git/blob/refs/heads/benchmarking:/abe.sh
>>> [2]
>>> https://git.linaro.org/toolchain/spec2xxx-utils.git/blob/refs/heads/test:/bench-ilp32.sh
>>>
>>>
>>>>>>
>>>>>> Do you know if Linaro plans to release a ipl32 toolchain ?
>>>>> It seems that linaro will not release it before patches for ilp32 of kernel
>>>>> and
>>>>> glibc upstreamed.
>>>>> Here[2] is a status for ilp32 in linaro.
>>>>
>>>> Thanks for the link.
>>>>
>>>> Best regards,
>>>> Romain
>>>>
>>>>>
>>>>> Regards
>>>>>
>>>>> Bamvor
>>>>>
>>>>> [1] http://people.linaro.org/~maxim.kuvyrkov/bench-ilp32/
>>>>> [2] https://wiki.linaro.org/Platform/arm64-ilp32
>>>>>
>>>>>> Best regards,
>>>>>> Romain Naour
>>>>>>
>>>>>>>
>>>>>>> changes since v2
>>>>>>> 1. rebase on the patch have been .
>>>>>>> "827ba46 aarch64: add big endian(aarch64_be) support"
>>>>>>> 2. Add "!BR2_aarch64_be" along with "!BR2_aarch64" in patch 1/5
>>>>>>> according to
>>>>>>> the suggestion from Thomas.
>>>>>>> 3. Improve the ifeq in patch 2/5 according to Gustavo.
>>>>>>> 4. Do not pass invalid "-mabi" option to ld in patch 3/5 according to
>>>>>>> Gustavo.
>>>>>>>
>>>>>>> changes since v1
>>>>>>> 1. Avoid mabi issue in gcc 4.8 while build aarch64 lp64.
>>>>>>> 2. Change default libc, toolchain for ilp32 build.
>>>>>>> 3. Others changes suggested by Gustavo.
>>>>>>>
>>>>>>> [1] http://lists.busybox.net/pipermail/buildroot/2015-March/122115.html
>>>>>>> [2] http://lists.busybox.net/pipermail/buildroot/2015-March/122424.html
>>>>>>> [3] https://git.linaro.org/kernel/linux-linaro-tracking.git
>>>>>>> [4] https://wiki.linaro.org/ABE
>>>>>>>
>>>>>>>
>>>>>>> Bamvor Jian Zhang (5):
>>>>>>> aarch64: align aarch64_be config with aarch64s'
>>>>>>> aarch64: ilp32: handle special file name
>>>>>>> aarch64: ilp32: add ilp32 compiler and linker flags
>>>>>>> aarch64: ilp32: add ilp32 build config
>>>>>>> aarch64: ilp32 defconfig examples
>>>>>>>
>>>>>>> Makefile | 6 +++
>>>>>>> arch/Config.in.aarch64 | 36 ++++++++++++++++++
>>>>>>> configs/aarch64_be_defconfig | 2 +
>>>>>>> configs/aarch64_be_ilp32_defconfig | 8 ++++
>>>>>>> configs/aarch64_ilp32_defconfig | 8 ++++
>>>>>>> package/Makefile.in | 13 ++++++-
>>>>>>> package/binutils/Config.in | 4 +-
>>>>>>> package/binutils/Config.in.host | 5 ++-
>>>>>>> package/dropwatch/Config.in | 5 ++-
>>>>>>> package/gcc/Config.in.host | 11 +++---
>>>>>>> package/gdb/Config.in.host | 2 +-
>>>>>>> package/gpsd/Config.in | 2 +-
>>>>>>> package/lightning/Config.in | 5 ++-
>>>>>>> package/nginx/Config.in | 3 +-
>>>>>>> package/oprofile/Config.in | 6 ++-
>>>>>>> toolchain/Config.in | 2 +
>>>>>>> toolchain/helpers.mk | 5 ++-
>>>>>>> toolchain/toolchain-buildroot/Config.in | 7 ++--
>>>>>>> toolchain/toolchain-external/Config.in | 22 +++++++++++
>>>>>>> toolchain/toolchain-external/toolchain-external.mk | 44
>>>>>>> +++++++++++++++++++++-
>>>>>>> 20 files changed, 169 insertions(+), 27 deletions(-)
>>>>>>> create mode 100644 configs/aarch64_be_defconfig
>>>>>>> create mode 100644 configs/aarch64_be_ilp32_defconfig
>>>>>>> create mode 100644 configs/aarch64_ilp32_defconfig
>>>>>>>
>>>>>>
>>>>>
>>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-02-02 9:04 ` Romain Naour
@ 2016-02-02 10:49 ` Zhangjian
2016-02-02 11:16 ` Arnout Vandecappelle
0 siblings, 1 reply; 18+ messages in thread
From: Zhangjian @ 2016-02-02 10:49 UTC (permalink / raw)
To: buildroot
Hi, Romain
On 2016/2/2 17:04, Romain Naour wrote:
> Hi Bamvor,
>
> Le 02/02/2016 03:29, Zhangjian (Bamvor) a ?crit :
>> Hi, Romain
>>
>>
>> On 2016/1/24 19:35, Romain Naour wrote:
>>> Hi Bamvor,
>>>
>>> Le 21/01/2016 10:03, Bamvor Zhang Jian a ?crit :
>>>> Hi, Romain
>>>>
>>>> On 01/21/2016 05:26 AM, Romain Naour wrote:
>>>>> Hi Bamvor,
>>>>>
>>>>> Le 19/01/2016 05:00, Bamvor Zhang Jian a ?crit :
>>>>>> Hi, Romain
>>>>>>
>>>>>> On 01/16/2016 11:25 PM, Romain Naour wrote:
>>>>>>> Hello Bamvor,
>>>> [...]
>>>>>>> Can you provide the command lines you used to build the toolchain ? on
>>>>>>> which abe
>>>>>>> branch ? Otherwise we can't test your series.
>>>>>> You could find the toolchain here[1]
>>>>>
>>>>> Thanks but this is not a cross-toolchain:
>>>>>
>>>>> file bin/aarch64-ilp32-linux-gnu-gcc
>>>>> bin/aarch64-ilp32-linux-gnu-gcc: ELF 64-bit LSB executable, ARM aarch64,
>>>>> version
>>>>> 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for
>>>>> GNU/Linux 3.7.0, BuildID[sha1]=0727b9d5c173c83568f5d19cfc87a05540ec8b77, not
>>>>> stripped
>>>>>
>>>>> It seems that's a native toolchain.
>>>>>
>>>>> It should be something like (from aarch64-linaro 2015.08)
>>>>> file bin/aarch64-linux-gnu-gcc
>>>>> bin/aarch64-linux-gnu-gcc: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
>>>>> dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
>>>>> 2.6.32, BuildID[sha1]=91a19539d0f6b0f38d599db648b4b5760000666a, not stripped
>>>>>
>>>> Yeap, it is not a cross compile. I use it in an aarch64 chroot environment in
>>>> x86. I feel it is enough to test these patches.
>>>
>>> Buildroot is a tool for cross-compiling, you know it ;-)
>>> Honestly I'm not very interested to test the toolchain by itself, only your
>>> patches for the external toolchain infra.
>>>
>>>>> Can you provide a pre-build toolchain or a recipe to rebuild a aarch64 ipl32
>>>>> toolchain ?
>>>> Linaro provide abe[1] to build toochain. You could follow this script[2] to know
>>>> how to use it. It seems that the server in tcwg is down. Hope, you could make
>>>> use of the method used by abe system.
>>>
>>> I really tried to build a aarch64 ipl32 cross-toolchain with abe but I'm stuck
>>> with glibc build. I don't know what's the glibc branch I should use.
>>> By default I used the release/2.20/master branch
>>>
>>> aarch64-ilp32-linux-gnu-gcc -mabi=ilp32 -nostdlib -nostartfiles -r -o
>>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/Scrt1.o
>>>
>>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.os
>>>
>>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/abi-note.o
>>>
>>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/init.o
>>>
>>> ../sysdeps/aarch64/start.S: Assembler messages:
>>> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
>>> in this object file format
>>> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
>>> in this object file format
>>> ../sysdeps/aarch64/start.S:92: Error: cannot represent BFD_RELOC_64 relocation
>>> in this object file format
>>> /home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/sysd-rules:1345:
>>>
>>> recipe for target
>>> '/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.o'
>>>
>>> failed
>>> make[2]: ***
>>> [/home/naourr/linaro-toolchain/builds/x86_64-unknown-linux-gnu/aarch64-ilp32-linux-gnu/glibc.git~linaro-2.20-ilp32-ilp32/csu/start.o]
>>>
>>> Error 1
>> You could this glibc[1]. IIRC, It is for patch v6 rfc2. We are planning to
>> update it for patch v6 rfc5.
>
> Thanks for this link.
>
> To be honest, I don't think this series will be merged as is until a stable
> toolchain release is made.
What's your mean stable toolchain? A toolchain release from a organization or
company?
Do you think it will be accepted after patch of ilp32 of kernel and glibc
upstream?
I am trying to improve the glibc support for ilp32 base on the exist one
> When it's done, can you respin your series on top of
> master since the toolchain-external code has been updated recently ?
Yes, of course.
Regards
Bamvor
>
> Best regards,
> Romain
>
>>
>> Regards
>>
>> Bamvor
>>
>>
>> [1] https://github.com/norov/glibc/tree/thunderx-ilp32-32time_toff_t
>>>
>>> Also I had several issue with the abe script on my system (Fedora) and I had to
>>> modify some part of the script to be able to continue the build.
>>>
>>> So, It would be great if you can provide a precompiled cross-toolchain.
>>>
>>> Best regards,
>>> Romain
>>>
>>>>
>>>> Regards
>>>>
>>>> Bamvor
>>>>
>>>> [1]
>>>> https://git.linaro.org/toolchain/abe.git/blob/refs/heads/benchmarking:/abe.sh
>>>> [2]
>>>> https://git.linaro.org/toolchain/spec2xxx-utils.git/blob/refs/heads/test:/bench-ilp32.sh
>>>>
>>>>
>>>>>>>
>>>>>>> Do you know if Linaro plans to release a ipl32 toolchain ?
>>>>>> It seems that linaro will not release it before patches for ilp32 of kernel
>>>>>> and
>>>>>> glibc upstreamed.
>>>>>> Here[2] is a status for ilp32 in linaro.
>>>>>
>>>>> Thanks for the link.
>>>>>
>>>>> Best regards,
>>>>> Romain
>>>>>
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Bamvor
>>>>>>
>>>>>> [1] http://people.linaro.org/~maxim.kuvyrkov/bench-ilp32/
>>>>>> [2] https://wiki.linaro.org/Platform/arm64-ilp32
>>>>>>
>>>>>>> Best regards,
>>>>>>> Romain Naour
>>>>>>>
>>>>>>>>
>>>>>>>> changes since v2
>>>>>>>> 1. rebase on the patch have been .
>>>>>>>> "827ba46 aarch64: add big endian(aarch64_be) support"
>>>>>>>> 2. Add "!BR2_aarch64_be" along with "!BR2_aarch64" in patch 1/5
>>>>>>>> according to
>>>>>>>> the suggestion from Thomas.
>>>>>>>> 3. Improve the ifeq in patch 2/5 according to Gustavo.
>>>>>>>> 4. Do not pass invalid "-mabi" option to ld in patch 3/5 according to
>>>>>>>> Gustavo.
>>>>>>>>
>>>>>>>> changes since v1
>>>>>>>> 1. Avoid mabi issue in gcc 4.8 while build aarch64 lp64.
>>>>>>>> 2. Change default libc, toolchain for ilp32 build.
>>>>>>>> 3. Others changes suggested by Gustavo.
>>>>>>>>
>>>>>>>> [1] http://lists.busybox.net/pipermail/buildroot/2015-March/122115.html
>>>>>>>> [2] http://lists.busybox.net/pipermail/buildroot/2015-March/122424.html
>>>>>>>> [3] https://git.linaro.org/kernel/linux-linaro-tracking.git
>>>>>>>> [4] https://wiki.linaro.org/ABE
>>>>>>>>
>>>>>>>>
>>>>>>>> Bamvor Jian Zhang (5):
>>>>>>>> aarch64: align aarch64_be config with aarch64s'
>>>>>>>> aarch64: ilp32: handle special file name
>>>>>>>> aarch64: ilp32: add ilp32 compiler and linker flags
>>>>>>>> aarch64: ilp32: add ilp32 build config
>>>>>>>> aarch64: ilp32 defconfig examples
>>>>>>>>
>>>>>>>> Makefile | 6 +++
>>>>>>>> arch/Config.in.aarch64 | 36 ++++++++++++++++++
>>>>>>>> configs/aarch64_be_defconfig | 2 +
>>>>>>>> configs/aarch64_be_ilp32_defconfig | 8 ++++
>>>>>>>> configs/aarch64_ilp32_defconfig | 8 ++++
>>>>>>>> package/Makefile.in | 13 ++++++-
>>>>>>>> package/binutils/Config.in | 4 +-
>>>>>>>> package/binutils/Config.in.host | 5 ++-
>>>>>>>> package/dropwatch/Config.in | 5 ++-
>>>>>>>> package/gcc/Config.in.host | 11 +++---
>>>>>>>> package/gdb/Config.in.host | 2 +-
>>>>>>>> package/gpsd/Config.in | 2 +-
>>>>>>>> package/lightning/Config.in | 5 ++-
>>>>>>>> package/nginx/Config.in | 3 +-
>>>>>>>> package/oprofile/Config.in | 6 ++-
>>>>>>>> toolchain/Config.in | 2 +
>>>>>>>> toolchain/helpers.mk | 5 ++-
>>>>>>>> toolchain/toolchain-buildroot/Config.in | 7 ++--
>>>>>>>> toolchain/toolchain-external/Config.in | 22 +++++++++++
>>>>>>>> toolchain/toolchain-external/toolchain-external.mk | 44
>>>>>>>> +++++++++++++++++++++-
>>>>>>>> 20 files changed, 169 insertions(+), 27 deletions(-)
>>>>>>>> create mode 100644 configs/aarch64_be_defconfig
>>>>>>>> create mode 100644 configs/aarch64_be_ilp32_defconfig
>>>>>>>> create mode 100644 configs/aarch64_ilp32_defconfig
>>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>> _______________________________________________
>>> buildroot mailing list
>>> buildroot at busybox.net
>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>
>>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-02-02 10:49 ` Zhangjian
@ 2016-02-02 11:16 ` Arnout Vandecappelle
2016-02-03 21:11 ` Romain Naour
0 siblings, 1 reply; 18+ messages in thread
From: Arnout Vandecappelle @ 2016-02-02 11:16 UTC (permalink / raw)
To: buildroot
On 02-02-16 11:49, Zhangjian (Bamvor) wrote:
> Hi, Romain
>
> On 2016/2/2 17:04, Romain Naour wrote:
>> Hi Bamvor,
>>
>> Le 02/02/2016 03:29, Zhangjian (Bamvor) a ?crit :
[snip]
>>> You could this glibc[1]. IIRC, It is for patch v6 rfc2. We are planning to
>>> update it for patch v6 rfc5.
>>
>> Thanks for this link.
>>
>> To be honest, I don't think this series will be merged as is until a stable
>> toolchain release is made.
> What's your mean stable toolchain? A toolchain release from a organization or
> company?
It means a release made by someone, not a random version from a git tree
somewhere. Basically something where people know where to send bug reports to.
This indeed usually means it's done by an organisation.
> Do you think it will be accepted after patch of ilp32 of kernel and glibc
> upstream?
It doesn't necessarily mean that upstream has to have accepted it already. We
just prefer to have a release tarball.
Regards,
Arnout
> I am trying to improve the glibc support for ilp32 base on the exist one
>> When it's done, can you respin your series on top of
>> master since the toolchain-external code has been updated recently ?
> Yes, of course.
>
[snip]
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-02-02 11:16 ` Arnout Vandecappelle
@ 2016-02-03 21:11 ` Romain Naour
2016-03-20 13:10 ` Zhangjian
0 siblings, 1 reply; 18+ messages in thread
From: Romain Naour @ 2016-02-03 21:11 UTC (permalink / raw)
To: buildroot
Hello Bamvor, All,
Le 02/02/2016 12:16, Arnout Vandecappelle a ?crit :
> On 02-02-16 11:49, Zhangjian (Bamvor) wrote:
>> Hi, Romain
>>
>> On 2016/2/2 17:04, Romain Naour wrote:
>>> Hi Bamvor,
>>>
>>> Le 02/02/2016 03:29, Zhangjian (Bamvor) a ?crit :
> [snip]
>>>> You could this glibc[1]. IIRC, It is for patch v6 rfc2. We are planning to
>>>> update it for patch v6 rfc5.
>>>
>>> Thanks for this link.
The git tree from github doesn't build:
../sysdeps/aarch64/multiarch/memset.c: In function '__libc_memset_ifunc':
../sysdeps/aarch64/multiarch/memset.c:35:1: error: implicit declaration of
function '__getauxval' [-Werror=implicit-function-declaration]
libc_ifunc (__libc_memset,
>>>
>>> To be honest, I don't think this series will be merged as is until a stable
>>> toolchain release is made.
>> What's your mean stable toolchain? A toolchain release from a organization or
>> company?
>
> It means a release made by someone, not a random version from a git tree
> somewhere. Basically something where people know where to send bug reports to.
> This indeed usually means it's done by an organisation.
At the beginning of this review I expected that it was easy to rebuild an IPL32
toolchain using the abe script, but it's not the case.
>
>
>> Do you think it will be accepted after patch of ilp32 of kernel and glibc
>> upstream?
>
> It doesn't necessarily mean that upstream has to have accepted it already. We
> just prefer to have a release tarball.
See as example the toolchains provided by Imagination Technologies [1] or
Synopsys [2]. All their patches they are using may not upstream yet, but they
provide a working toolchain which is pretty well tested.
[1] http://codescape-mips-sdk.imgtec.com/components/toolchain/2015.06-05/
[2] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/
>
> Regards,
> Arnout
>
>> I am trying to improve the glibc support for ilp32 base on the exist one
I understand, that's great.
Best regards,
Romain
>
>>> When it's done, can you respin your series on top of
>>> master since the toolchain-external code has been updated recently ?
>> Yes, of course.
>>
>
> [snip]
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-02-03 21:11 ` Romain Naour
@ 2016-03-20 13:10 ` Zhangjian
2016-03-20 20:33 ` Romain Naour
0 siblings, 1 reply; 18+ messages in thread
From: Zhangjian @ 2016-03-20 13:10 UTC (permalink / raw)
To: buildroot
Hi, Romain, Arnout, all
On 2016/2/4 5:11, Romain Naour wrote:
> Hello Bamvor, All,
>
> Le 02/02/2016 12:16, Arnout Vandecappelle a ?crit :
>> On 02-02-16 11:49, Zhangjian (Bamvor) wrote:
>>> Hi, Romain
>>>
>>> On 2016/2/2 17:04, Romain Naour wrote:
>>>> Hi Bamvor,
>>>>
>>>> Le 02/02/2016 03:29, Zhangjian (Bamvor) a ?crit :
>> [snip]
>>>>> You could this glibc[1]. IIRC, It is for patch v6 rfc2. We are planning to
>>>>> update it for patch v6 rfc5.
>>>>
>>>> Thanks for this link.
>
> The git tree from github doesn't build:
>
> ../sysdeps/aarch64/multiarch/memset.c: In function '__libc_memset_ifunc':
> ../sysdeps/aarch64/multiarch/memset.c:35:1: error: implicit declaration of
> function '__getauxval' [-Werror=implicit-function-declaration]
> libc_ifunc (__libc_memset,
>
>>>>
>>>> To be honest, I don't think this series will be merged as is until a stable
>>>> toolchain release is made.
>>> What's your mean stable toolchain? A toolchain release from a organization or
>>> company?
>>
>> It means a release made by someone, not a random version from a git tree
>> somewhere. Basically something where people know where to send bug reports to.
>> This indeed usually means it's done by an organisation.
>
> At the beginning of this review I expected that it was easy to rebuild an IPL32
> toolchain using the abe script, but it's not the case.
>
>>
>>
>>> Do you think it will be accepted after patch of ilp32 of kernel and glibc
>>> upstream?
>>
>> It doesn't necessarily mean that upstream has to have accepted it already. We
>> just prefer to have a release tarball.
>
> See as example the toolchains provided by Imagination Technologies [1] or
> Synopsys [2]. All their patches they are using may not upstream yet, but they
> provide a working toolchain which is pretty well tested.
>
> [1] http://codescape-mips-sdk.imgtec.com/components/toolchain/2015.06-05/
> [2] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/
In recent linaro connect, there is a presentation[1] about the performance of ilp32.
And in its homepage[2], there is a script[3] for building the ilp32 compiler.
At this pointer, are you intertested in review the patches of ilp32 if I send a new
series?
Regards
Bamvor
[1] http://connect.linaro.org/resource/bkk16/bkk16-305b/
[2] https://wiki.leapproject.ca/index.php?title=AArch64_ILP32_Toolchain
[3] https://github.com/leapproject/ilp32-toolchain/blob/master/build_ilp32_toolchain.sh
>
>>
>> Regards,
>> Arnout
>>
>>> I am trying to improve the glibc support for ilp32 base on the exist one
>
> I understand, that's great.
>
> Best regards,
> Romain
>
>>
>>>> When it's done, can you respin your series on top of
>>>> master since the toolchain-external code has been updated recently ?
>>> Yes, of course.
>>>
>>
>> [snip]
>>
>>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH V3 RESEND 0/5] Add ILP32 support in aarch64
2016-03-20 13:10 ` Zhangjian
@ 2016-03-20 20:33 ` Romain Naour
0 siblings, 0 replies; 18+ messages in thread
From: Romain Naour @ 2016-03-20 20:33 UTC (permalink / raw)
To: buildroot
Hi Bamvor, All,
Le 20/03/2016 14:10, Zhangjian (Bamvor) a ?crit :
> Hi, Romain, Arnout, all
>
[snip]
>>>
>>>> Do you think it will be accepted after patch of ilp32 of kernel and glibc
>>>> upstream?
>>>
>>> It doesn't necessarily mean that upstream has to have accepted it already. We
>>> just prefer to have a release tarball.
>>
>> See as example the toolchains provided by Imagination Technologies [1] or
>> Synopsys [2]. All their patches they are using may not upstream yet, but they
>> provide a working toolchain which is pretty well tested.
>>
>> [1] http://codescape-mips-sdk.imgtec.com/components/toolchain/2015.06-05/
>> [2] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/
> In recent linaro connect, there is a presentation[1] about the performance of
> ilp32.
> And in its homepage[2], there is a script[3] for building the ilp32 compiler.
> At this pointer, are you intertested in review the patches of ilp32 if I send a new
> series?
Thanks for the news about ilp32 support in aarch64.
Since your previous patches doesn't apply anymore on the master branch we have
marked them "Changes requested" in the patchwork. However, I added a new entry
in our TODO list [1] in order to not forget them.
The first problem is: how to build a working ipl32 toolchain ?
* With the abe script I wasn't able to build one due to some build issue with
glibc. Also the abe script was from an experimental/unstable branch.
* With build_ilp32_toolchain.sh script we need to build the toolchain as root
[2] which is not recommended. Also the kernel header is directly imported from
the host machine (from /usr/include). I guess an ilp32 toolchain needs some
specific or modified kernel header in order to support ilp32 based system.
* There is no aarch64 ilp32 prebuild toolchain available.
It seems that the number of patches is quite limited [4], so maybe you can use
the Buildroot internal toolchain infra to build the toolchain, and use a
specific source version for gcc, binutils and glibc and include all needed patches.
Do you know if each ilp32 patches can be easily applied on binutils and glibc
official release ? Otherwise you can simply use the hashes provided by
leapproject wiki [4].
For gcc it's a bit complicated since the patches are for the Linaro GCC 4.9.3,
not sure it will apply/work with a vanilla gcc 4.9.3. Also
gcc-prequisites-aarch64_ilp32-target-autoconf.patch is quite huge and need to be
split into several patches...
But this require a lot of work.
So, in the end, it would be easier if you provide a prebuild ilp32 toolchain
tarball (like Arnout suggest) with your new series.
To answer your question.
Yes, I'm interested in reviewing your ilp32 series but I need a toolchain to
test it :)
Best regards,
Romain
[1] http://elinux.org/Buildroot#Toolchain
[2]
https://github.com/leapproject/ilp32-toolchain/blob/master/build_ilp32_toolchain.sh#L15
[3]
https://github.com/leapproject/ilp32-toolchain/blob/master/build_ilp32_toolchain.sh#L112
[4]
https://wiki.leapproject.ca/index.php?title=AArch64_ILP32_Toolchain#Sources_and_Patches
>
> Regards
>
> Bamvor
>
> [1] http://connect.linaro.org/resource/bkk16/bkk16-305b/
> [2] https://wiki.leapproject.ca/index.php?title=AArch64_ILP32_Toolchain
> [3]
> https://github.com/leapproject/ilp32-toolchain/blob/master/build_ilp32_toolchain.sh
>
^ permalink raw reply [flat|nested] 18+ messages in thread