All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thor Thayer <tthayer@opensource.altera.com>
To: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: <lee.jones@linaro.org>, <linus.walleij@linaro.org>,
	<gnurou@gmail.com>, <jdelvare@suse.com>, <linux@roeck-us.net>,
	<robh+dt@kernel.org>, <pawell.moll@arm.com>,
	<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
	<linux-gpio@vger.kernel.org>, <linux-hwmon@vger.kernel.org>,
	<devicetree@vger.kernel.org>
Subject: Re: [RFC 5/8] ARM: socfpga: dts: Add Devkit A10-SR fields for Arria10
Date: Thu, 31 Mar 2016 13:28:03 -0500	[thread overview]
Message-ID: <56FD6C33.8040907@opensource.altera.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1603301240250.21508@linux-builds1>



On 03/30/2016 12:42 PM, Dinh Nguyen wrote:
> On Tue, 29 Mar 2016, tthayer@opensource.altera.com wrote:
>
>> From: Thor Thayer <tthayer@opensource.altera.com>
>>
>> Add the Altera Arria10 System Resource node. This is a Multi-Function
>> device with GPIO and HWMON support.
>>
>> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
>>
>> +		spi1: spi@ffda5000 {
>> +			compatible = "snps,dw-apb-ssi";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0xffda5000 0x100>;
>> +			interrupts = <0 102 4>;
>> +			num-chipselect = <4>;
>> +			bus-num = <0>;
>> +			/*32bit_access;*/
>> +			tx-dma-channel = <&pdma 16>;
>> +			rx-dma-channel = <&pdma 17>;
>> +			clocks = <&spi_m_clk>;
>> +			status = "disabled";
>> +		};
>> +
>
> I think you need to split this into 2 patches, 1 for adding the SPI nodes, and
> the 2nd for adding the slave device.
>
> BR,
> Dinh
>

OK. Thanks for reviewing.

WARNING: multiple messages have this Message-ID (diff)
From: Thor Thayer <tthayer@opensource.altera.com>
To: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: lee.jones@linaro.org, linus.walleij@linaro.org, gnurou@gmail.com,
	jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org,
	pawell.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, linux-gpio@vger.kernel.org,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [RFC 5/8] ARM: socfpga: dts: Add Devkit A10-SR fields for Arria10
Date: Thu, 31 Mar 2016 13:28:03 -0500	[thread overview]
Message-ID: <56FD6C33.8040907@opensource.altera.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1603301240250.21508@linux-builds1>



On 03/30/2016 12:42 PM, Dinh Nguyen wrote:
> On Tue, 29 Mar 2016, tthayer@opensource.altera.com wrote:
>
>> From: Thor Thayer <tthayer@opensource.altera.com>
>>
>> Add the Altera Arria10 System Resource node. This is a Multi-Function
>> device with GPIO and HWMON support.
>>
>> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
>>
>> +		spi1: spi@ffda5000 {
>> +			compatible = "snps,dw-apb-ssi";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0xffda5000 0x100>;
>> +			interrupts = <0 102 4>;
>> +			num-chipselect = <4>;
>> +			bus-num = <0>;
>> +			/*32bit_access;*/
>> +			tx-dma-channel = <&pdma 16>;
>> +			rx-dma-channel = <&pdma 17>;
>> +			clocks = <&spi_m_clk>;
>> +			status = "disabled";
>> +		};
>> +
>
> I think you need to split this into 2 patches, 1 for adding the SPI nodes, and
> the 2nd for adding the slave device.
>
> BR,
> Dinh
>

OK. Thanks for reviewing.

  reply	other threads:[~2016-03-31 18:28 UTC|newest]

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-29 19:13 [RFC] Addition of Altera Arria10 System Resource Chip tthayer
2016-03-29 19:13 ` tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2016-03-29 19:13 ` [RFC 1/8] dt-bindings: mfd: Add Altera Arria10 System Resource Chip bindings tthayer
2016-03-29 19:13   ` tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2016-03-30 11:35   ` Lee Jones
2016-03-30 11:36     ` Lee Jones
2016-03-31 14:06     ` Rob Herring
2016-03-31 18:21     ` Thor Thayer
2016-03-31 18:21       ` Thor Thayer
2016-04-01  8:14       ` Lee Jones
2016-04-01  8:14         ` Lee Jones
2016-04-01 20:21         ` Thor Thayer
2016-04-01 20:21           ` Thor Thayer
2016-03-29 19:13 ` [RFC 2/8] MAINTAINERS: Addition of Altera Arria10 System Resource Chip tthayer
2016-03-29 19:13   ` tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2016-03-30  8:19   ` Lee Jones
2016-03-30  8:19     ` Lee Jones
2016-03-29 19:13 ` [RFC 3/8] mfd: altr_a10sr: Add Altera Arria10 DevKit " tthayer
2016-03-29 19:13   ` tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2016-03-30 11:51   ` Lee Jones
2016-03-30 11:51     ` Lee Jones
2016-03-30 14:52     ` Thor Thayer
2016-03-30 14:52       ` Thor Thayer
2016-03-30 14:52       ` Lee Jones
2016-03-30 14:52         ` Lee Jones
2016-03-30 16:10         ` Mark Brown
2016-03-31  9:10           ` Lee Jones
2016-03-31  9:11             ` Lee Jones
2016-03-29 19:13 ` [RFC 4/8] gpio: altera-a10sr: Add A10 System Resource Chip GPIO support tthayer
2016-03-29 19:13   ` tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
     [not found]   ` <1459278791-3646-5-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2016-03-30  8:18     ` Lee Jones
2016-03-30  8:18       ` Lee Jones
2016-04-01 12:17   ` Linus Walleij
2016-04-01 20:34     ` Thor Thayer
2016-04-01 20:34       ` Thor Thayer
2016-04-08 11:39       ` Linus Walleij
2016-03-29 19:13 ` [RFC 5/8] ARM: socfpga: dts: Add Devkit A10-SR fields for Arria10 tthayer
2016-03-29 19:13   ` tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2016-03-30 17:42   ` Dinh Nguyen
2016-03-30 17:42     ` Dinh Nguyen
2016-03-31 18:28     ` Thor Thayer [this message]
2016-03-31 18:28       ` Thor Thayer
2016-03-29 19:13 ` [RFC 6/8] ARM: socfpga: dts: Add LED framework to A10-SR GPIO tthayer
2016-03-29 19:13   ` tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2016-03-29 19:13 ` [RFC 7/8] hwmon: Altera Arria10 System Resource Chip - HW Monitor tthayer
2016-03-29 19:13   ` tthayer
2016-03-29 20:16   ` Guenter Roeck
2016-03-29 21:43     ` Thor Thayer
2016-03-29 21:43       ` Thor Thayer
2016-03-29 22:29       ` Mark Brown
2016-03-29 22:30       ` Guenter Roeck
2016-03-30  8:17   ` Lee Jones
2016-03-30  8:18     ` Lee Jones
2016-03-29 19:13 ` [RFC 8/8] ARM: socfpga: dts: Add Devkit Arria10-SR HWMON tthayer
2016-03-29 19:13   ` tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
     [not found] ` <1459278791-3646-1-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2016-03-30  8:14   ` [RFC] Addition of Altera Arria10 System Resource Chip Lee Jones
2016-03-30  8:14     ` Lee Jones
2016-03-30 14:27 ` [RFC 7/8] hwmon: Altera Arria10 System Resource Chip - HW Monitor Thor Thayer
2016-03-30 14:31   ` Thor Thayer
2016-04-15 16:57 ` [RFC 1/8] dt-bindings: mfd: Add Altera Arria10 System Resource Chip bindings Thor Thayer
2016-04-15 17:02   ` Thor Thayer
2016-04-18  7:43   ` Lee Jones
2016-04-18  7:44     ` Lee Jones
2016-04-18  7:45   ` Lee Jones
2016-04-18  7:46     ` Lee Jones
2016-04-18 14:51 ` Thor Thayer
2016-04-18 14:55   ` Thor Thayer
2016-04-18 15:07 ` Thor Thayer
2016-04-18 15:12   ` Thor Thayer
2016-04-19  7:23   ` Lee Jones
2016-04-19  7:25     ` Lee Jones
2016-04-19 14:38     ` Thor Thayer
2016-04-19 14:38       ` Thor Thayer
2016-04-20  1:48       ` Guenter Roeck
2016-04-20  1:48         ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56FD6C33.8040907@opensource.altera.com \
    --to=tthayer@opensource.altera.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@opensource.altera.com \
    --cc=gnurou@gmail.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jdelvare@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=pawell.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.