[PATCH v3 00/12] Add support for usb on Hikey960

[PATCH v3 00/12] Add support for usb on Hikey960

[Yu Chen]

The patchset adds support for usb functionality of Hikey960, includes:
- dwc3 driver for Hisilicon Kirin Soc hi3660
- usb driver for HiKey960 board
- some adjustment in dwc3, usb gadget and typec driver
- dts for support usb of HiKey960

This patchset based on patchset https://lkml.org/lkml/2019/1/25/344
of Heikki Krogerus

Yu Chen (12):
  dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
  dt-bindings: misc: Add bindings for HiSilicon usb hub and data role
    switch functionality on HiKey960
  usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc
    Platform
  usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
  usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for
    Hisilicon Kirin Soc
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  phy: Add usb phy support for hi3660 Soc of Hisilicon
  usb: roles: Add usb role switch notifier.
  usb: dwc3: Registering a role switch in the DRD code.
  hikey960: Support usb functionality of Hikey960
  usb: gadget: Add configfs attribuite for controling
    match_existing_only
  dts: hi3660: Add support for usb on Hikey960

 .../bindings/misc/hisilicon-hikey-usb.txt          |  52 +++++
 .../devicetree/bindings/phy/phy-hi3660-usb3.txt    |  28 +++
 MAINTAINERS                                        |   8 +
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts  |  53 +++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi          |  74 +++++++
 drivers/misc/Kconfig                               |   6 +
 drivers/misc/Makefile                              |   1 +
 drivers/misc/hisi_hikey_usb.c                      | 167 +++++++++++++++
 drivers/phy/hisilicon/Kconfig                      |  10 +
 drivers/phy/hisilicon/Makefile                     |   1 +
 drivers/phy/hisilicon/phy-hi3660-usb3.c            | 232 +++++++++++++++++++++
 drivers/usb/dwc3/Kconfig                           |   1 +
 drivers/usb/dwc3/core.c                            |  43 ++++
 drivers/usb/dwc3/core.h                            |  10 +
 drivers/usb/dwc3/drd.c                             |  58 +++++-
 drivers/usb/dwc3/dwc3-of-simple.c                  |   4 +-
 drivers/usb/dwc3/gadget.c                          |   2 +-
 drivers/usb/gadget/configfs.c                      |  32 +++
 drivers/usb/roles/class.c                          |  20 +-
 include/linux/usb/role.h                           |  46 ++++
 20 files changed, 844 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
 create mode 100644 drivers/misc/hisi_hikey_usb.c
 create mode 100644 drivers/phy/hisilicon/phy-hi3660-usb3.c

-- 
2.15.0-rc2

[PATCH v3 00/12] Add support for usb on Hikey960

[Yu Chen]

The patchset adds support for usb functionality of Hikey960, includes:
- dwc3 driver for Hisilicon Kirin Soc hi3660
- usb driver for HiKey960 board
- some adjustment in dwc3, usb gadget and typec driver
- dts for support usb of HiKey960

This patchset based on patchset https://lkml.org/lkml/2019/1/25/344
of Heikki Krogerus

Yu Chen (12):
  dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
  dt-bindings: misc: Add bindings for HiSilicon usb hub and data role
    switch functionality on HiKey960
  usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc
    Platform
  usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
  usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for
    Hisilicon Kirin Soc
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  phy: Add usb phy support for hi3660 Soc of Hisilicon
  usb: roles: Add usb role switch notifier.
  usb: dwc3: Registering a role switch in the DRD code.
  hikey960: Support usb functionality of Hikey960
  usb: gadget: Add configfs attribuite for controling
    match_existing_only
  dts: hi3660: Add support for usb on Hikey960

 .../bindings/misc/hisilicon-hikey-usb.txt          |  52 +++++
 .../devicetree/bindings/phy/phy-hi3660-usb3.txt    |  28 +++
 MAINTAINERS                                        |   8 +
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts  |  53 +++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi          |  74 +++++++
 drivers/misc/Kconfig                               |   6 +
 drivers/misc/Makefile                              |   1 +
 drivers/misc/hisi_hikey_usb.c                      | 167 +++++++++++++++
 drivers/phy/hisilicon/Kconfig                      |  10 +
 drivers/phy/hisilicon/Makefile                     |   1 +
 drivers/phy/hisilicon/phy-hi3660-usb3.c            | 232 +++++++++++++++++++++
 drivers/usb/dwc3/Kconfig                           |   1 +
 drivers/usb/dwc3/core.c                            |  43 ++++
 drivers/usb/dwc3/core.h                            |  10 +
 drivers/usb/dwc3/drd.c                             |  58 +++++-
 drivers/usb/dwc3/dwc3-of-simple.c                  |   4 +-
 drivers/usb/dwc3/gadget.c                          |   2 +-
 drivers/usb/gadget/configfs.c                      |  32 +++
 drivers/usb/roles/class.c                          |  20 +-
 include/linux/usb/role.h                           |  46 ++++
 20 files changed, 844 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
 create mode 100644 drivers/misc/hisi_hikey_usb.c
 create mode 100644 drivers/phy/hisilicon/phy-hi3660-usb3.c

-- 
2.15.0-rc2

[PATCH v3 01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Yu Chen]

This patch adds binding documentation for supporting the hi3660 usb
phy on boards like the HiKey960.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Fix some format error as suggested by Rob.
v2:
* Change hi3660 usb PHY to hi3660 USB PHY
v3:
* Make device node a subnode of usb3_otg_bc register.
---
---
 .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
new file mode 100644
index 000000000000..6096214a2bc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
@@ -0,0 +1,28 @@
+Hisilicon hi3660 USB PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hi3660-usb-phy"
+- #phy-cells: must be 0
+- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
+- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
+- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
+- hisilicon,eye-diagram-param: parameter set for phy
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+This is a subnode of usb3_otg_bc register node.
+
+Example:
+	usb3_otg_bc: usb3_otg_bc@ff200000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0xff200000 0x0 0x1000>;
+
+		usb-phy {
+			compatible = "hisilicon,hi3660-usb-phy";
+			#phy-cells = <0>;
+			hisilicon,pericrg-syscon = <&crg_ctrl>;
+			hisilicon,pctrl-syscon = <&pctrl>;
+			hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
+			hisilicon,eye-diagram-param = <0x22466e4>;
+		};
+	};
-- 
2.15.0-rc2

[v3,01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Yu Chen]

This patch adds binding documentation for supporting the hi3660 usb
phy on boards like the HiKey960.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Fix some format error as suggested by Rob.
v2:
* Change hi3660 usb PHY to hi3660 USB PHY
v3:
* Make device node a subnode of usb3_otg_bc register.
---
---
 .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
new file mode 100644
index 000000000000..6096214a2bc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
@@ -0,0 +1,28 @@
+Hisilicon hi3660 USB PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hi3660-usb-phy"
+- #phy-cells: must be 0
+- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
+- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
+- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
+- hisilicon,eye-diagram-param: parameter set for phy
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+This is a subnode of usb3_otg_bc register node.
+
+Example:
+	usb3_otg_bc: usb3_otg_bc@ff200000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0xff200000 0x0 0x1000>;
+
+		usb-phy {
+			compatible = "hisilicon,hi3660-usb-phy";
+			#phy-cells = <0>;
+			hisilicon,pericrg-syscon = <&crg_ctrl>;
+			hisilicon,pctrl-syscon = <&pctrl>;
+			hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
+			hisilicon,eye-diagram-param = <0x22466e4>;
+		};
+	};

[PATCH v3 01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Yu Chen]

This patch adds binding documentation for supporting the hi3660 usb
phy on boards like the HiKey960.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Fix some format error as suggested by Rob.
v2:
* Change hi3660 usb PHY to hi3660 USB PHY
v3:
* Make device node a subnode of usb3_otg_bc register.
---
---
 .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
new file mode 100644
index 000000000000..6096214a2bc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
@@ -0,0 +1,28 @@
+Hisilicon hi3660 USB PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hi3660-usb-phy"
+- #phy-cells: must be 0
+- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
+- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
+- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
+- hisilicon,eye-diagram-param: parameter set for phy
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+This is a subnode of usb3_otg_bc register node.
+
+Example:
+	usb3_otg_bc: usb3_otg_bc@ff200000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0xff200000 0x0 0x1000>;
+
+		usb-phy {
+			compatible = "hisilicon,hi3660-usb-phy";
+			#phy-cells = <0>;
+			hisilicon,pericrg-syscon = <&crg_ctrl>;
+			hisilicon,pctrl-syscon = <&pctrl>;
+			hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
+			hisilicon,eye-diagram-param = <0x22466e4>;
+		};
+	};
-- 
2.15.0-rc2

Re: [PATCH v3 01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Rob Herring]

On Sat, Mar 02, 2019 at 05:04:54PM +0800, Yu Chen wrote:
> This patch adds binding documentation for supporting the hi3660 usb
> phy on boards like the HiKey960.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
> v1:
> * Fix some format error as suggested by Rob.
> v2:
> * Change hi3660 usb PHY to hi3660 USB PHY
> v3:
> * Make device node a subnode of usb3_otg_bc register.
> ---
> ---
>  .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> new file mode 100644
> index 000000000000..6096214a2bc6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> @@ -0,0 +1,28 @@
> +Hisilicon hi3660 USB PHY
> +-----------------------
> +
> +Required properties:
> +- compatible: should be "hisilicon,hi3660-usb-phy"
> +- #phy-cells: must be 0
> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.

You can drop this as it is now just the parent node.

> +- hisilicon,eye-diagram-param: parameter set for phy
> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
> +
> +This is a subnode of usb3_otg_bc register node.
> +
> +Example:
> +	usb3_otg_bc: usb3_otg_bc@ff200000 {
> +		compatible = "syscon", "simple-mfd";

This node should have a specific compatible.

> +		reg = <0x0 0xff200000 0x0 0x1000>;
> +
> +		usb-phy {
> +			compatible = "hisilicon,hi3660-usb-phy";
> +			#phy-cells = <0>;
> +			hisilicon,pericrg-syscon = <&crg_ctrl>;
> +			hisilicon,pctrl-syscon = <&pctrl>;
> +			hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
> +			hisilicon,eye-diagram-param = <0x22466e4>;
> +		};
> +	};
> -- 
> 2.15.0-rc2
> 

[v3,01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Rob Herring]

On Sat, Mar 02, 2019 at 05:04:54PM +0800, Yu Chen wrote:
> This patch adds binding documentation for supporting the hi3660 usb
> phy on boards like the HiKey960.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
> v1:
> * Fix some format error as suggested by Rob.
> v2:
> * Change hi3660 usb PHY to hi3660 USB PHY
> v3:
> * Make device node a subnode of usb3_otg_bc register.
> ---
> ---
>  .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> new file mode 100644
> index 000000000000..6096214a2bc6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> @@ -0,0 +1,28 @@
> +Hisilicon hi3660 USB PHY
> +-----------------------
> +
> +Required properties:
> +- compatible: should be "hisilicon,hi3660-usb-phy"
> +- #phy-cells: must be 0
> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.

You can drop this as it is now just the parent node.

> +- hisilicon,eye-diagram-param: parameter set for phy
> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
> +
> +This is a subnode of usb3_otg_bc register node.
> +
> +Example:
> +	usb3_otg_bc: usb3_otg_bc@ff200000 {
> +		compatible = "syscon", "simple-mfd";

This node should have a specific compatible.

> +		reg = <0x0 0xff200000 0x0 0x1000>;
> +
> +		usb-phy {
> +			compatible = "hisilicon,hi3660-usb-phy";
> +			#phy-cells = <0>;
> +			hisilicon,pericrg-syscon = <&crg_ctrl>;
> +			hisilicon,pctrl-syscon = <&pctrl>;
> +			hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
> +			hisilicon,eye-diagram-param = <0x22466e4>;
> +		};
> +	};
> -- 
> 2.15.0-rc2
>

Re: [PATCH v3 01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Chen Yu]

Hi Rob,

On 2019/3/12 21:45, Rob Herring wrote:
> On Sat, Mar 02, 2019 at 05:04:54PM +0800, Yu Chen wrote:
>> This patch adds binding documentation for supporting the hi3660 usb
>> phy on boards like the HiKey960.
>>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: John Stultz <john.stultz@linaro.org>
>> Cc: Binghui Wang <wangbinghui@hisilicon.com>
>> Signed-off-by: Yu Chen <chenyu56@huawei.com>
>> ---
>> v1:
>> * Fix some format error as suggested by Rob.
>> v2:
>> * Change hi3660 usb PHY to hi3660 USB PHY
>> v3:
>> * Make device node a subnode of usb3_otg_bc register.
>> ---
>> ---
>>  .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
>>  1 file changed, 28 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>> new file mode 100644
>> index 000000000000..6096214a2bc6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>> @@ -0,0 +1,28 @@
>> +Hisilicon hi3660 USB PHY
>> +-----------------------
>> +
>> +Required properties:
>> +- compatible: should be "hisilicon,hi3660-usb-phy"
>> +- #phy-cells: must be 0
>> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
>> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
>> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
> 
> You can drop this as it is now just the parent node.
> 
>> +- hisilicon,eye-diagram-param: parameter set for phy
>> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
>> +
>> +This is a subnode of usb3_otg_bc register node.
>> +
>> +Example:
>> +	usb3_otg_bc: usb3_otg_bc@ff200000 {
>> +		compatible = "syscon", "simple-mfd";
> 
> This node should have a specific compatible.
> 
Do you mean I need write a specific driver for this node ?

>> +		reg = <0x0 0xff200000 0x0 0x1000>;
>> +
>> +		usb-phy {
>> +			compatible = "hisilicon,hi3660-usb-phy";
>> +			#phy-cells = <0>;
>> +			hisilicon,pericrg-syscon = <&crg_ctrl>;
>> +			hisilicon,pctrl-syscon = <&pctrl>;
>> +			hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
>> +			hisilicon,eye-diagram-param = <0x22466e4>;
>> +		};
>> +	};
>> -- 
>> 2.15.0-rc2
>>
> 
> .
> 

Thanks
Yu Chen

[v3,01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Yu Chen]

Hi Rob,

On 2019/3/12 21:45, Rob Herring wrote:
> On Sat, Mar 02, 2019 at 05:04:54PM +0800, Yu Chen wrote:
>> This patch adds binding documentation for supporting the hi3660 usb
>> phy on boards like the HiKey960.
>>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: John Stultz <john.stultz@linaro.org>
>> Cc: Binghui Wang <wangbinghui@hisilicon.com>
>> Signed-off-by: Yu Chen <chenyu56@huawei.com>
>> ---
>> v1:
>> * Fix some format error as suggested by Rob.
>> v2:
>> * Change hi3660 usb PHY to hi3660 USB PHY
>> v3:
>> * Make device node a subnode of usb3_otg_bc register.
>> ---
>> ---
>>  .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
>>  1 file changed, 28 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>> new file mode 100644
>> index 000000000000..6096214a2bc6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>> @@ -0,0 +1,28 @@
>> +Hisilicon hi3660 USB PHY
>> +-----------------------
>> +
>> +Required properties:
>> +- compatible: should be "hisilicon,hi3660-usb-phy"
>> +- #phy-cells: must be 0
>> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
>> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
>> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
> 
> You can drop this as it is now just the parent node.
> 
>> +- hisilicon,eye-diagram-param: parameter set for phy
>> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
>> +
>> +This is a subnode of usb3_otg_bc register node.
>> +
>> +Example:
>> +	usb3_otg_bc: usb3_otg_bc@ff200000 {
>> +		compatible = "syscon", "simple-mfd";
> 
> This node should have a specific compatible.
> 
Do you mean I need write a specific driver for this node ?

>> +		reg = <0x0 0xff200000 0x0 0x1000>;
>> +
>> +		usb-phy {
>> +			compatible = "hisilicon,hi3660-usb-phy";
>> +			#phy-cells = <0>;
>> +			hisilicon,pericrg-syscon = <&crg_ctrl>;
>> +			hisilicon,pctrl-syscon = <&pctrl>;
>> +			hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
>> +			hisilicon,eye-diagram-param = <0x22466e4>;
>> +		};
>> +	};
>> -- 
>> 2.15.0-rc2
>>
> 
> .
> 

Thanks
Yu Chen

Re: [PATCH v3 01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Chen Yu]

Hi Rob,

On 2019/3/12 21:45, Rob Herring wrote:
> On Sat, Mar 02, 2019 at 05:04:54PM +0800, Yu Chen wrote:
>> This patch adds binding documentation for supporting the hi3660 usb
>> phy on boards like the HiKey960.
>>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: John Stultz <john.stultz@linaro.org>
>> Cc: Binghui Wang <wangbinghui@hisilicon.com>
>> Signed-off-by: Yu Chen <chenyu56@huawei.com>
>> ---
>> v1:
>> * Fix some format error as suggested by Rob.
>> v2:
>> * Change hi3660 usb PHY to hi3660 USB PHY
>> v3:
>> * Make device node a subnode of usb3_otg_bc register.
>> ---
>> ---
>>  .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
>>  1 file changed, 28 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>> new file mode 100644
>> index 000000000000..6096214a2bc6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>> @@ -0,0 +1,28 @@
>> +Hisilicon hi3660 USB PHY
>> +-----------------------
>> +
>> +Required properties:
>> +- compatible: should be "hisilicon,hi3660-usb-phy"
>> +- #phy-cells: must be 0
>> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
>> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
>> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
> 
> You can drop this as it is now just the parent node.
> 
>> +- hisilicon,eye-diagram-param: parameter set for phy
>> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
>> +
>> +This is a subnode of usb3_otg_bc register node.
>> +
>> +Example:
>> +	usb3_otg_bc: usb3_otg_bc@ff200000 {
>> +		compatible = "syscon", "simple-mfd";
> 
> This node should have a specific compatible.
> 
Do you mean I need write a specific driver for this node ?

>> +		reg = <0x0 0xff200000 0x0 0x1000>;
>> +
>> +		usb-phy {
>> +			compatible = "hisilicon,hi3660-usb-phy";
>> +			#phy-cells = <0>;
>> +			hisilicon,pericrg-syscon = <&crg_ctrl>;
>> +			hisilicon,pctrl-syscon = <&pctrl>;
>> +			hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
>> +			hisilicon,eye-diagram-param = <0x22466e4>;
>> +		};
>> +	};
>> -- 
>> 2.15.0-rc2
>>
> 
> .
> 

Thanks
Yu Chen

Re: [PATCH v3 01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Rob Herring]

On Tue, Mar 12, 2019 at 8:40 PM Chen Yu <chenyu56@huawei.com> wrote:
>
> Hi Rob,
>
> On 2019/3/12 21:45, Rob Herring wrote:
> > On Sat, Mar 02, 2019 at 05:04:54PM +0800, Yu Chen wrote:
> >> This patch adds binding documentation for supporting the hi3660 usb
> >> phy on boards like the HiKey960.
> >>
> >> Cc: Rob Herring <robh+dt@kernel.org>
> >> Cc: Mark Rutland <mark.rutland@arm.com>
> >> Cc: John Stultz <john.stultz@linaro.org>
> >> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> >> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> >> ---
> >> v1:
> >> * Fix some format error as suggested by Rob.
> >> v2:
> >> * Change hi3660 usb PHY to hi3660 USB PHY
> >> v3:
> >> * Make device node a subnode of usb3_otg_bc register.
> >> ---
> >> ---
> >>  .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
> >>  1 file changed, 28 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >> new file mode 100644
> >> index 000000000000..6096214a2bc6
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >> @@ -0,0 +1,28 @@
> >> +Hisilicon hi3660 USB PHY
> >> +-----------------------
> >> +
> >> +Required properties:
> >> +- compatible: should be "hisilicon,hi3660-usb-phy"
> >> +- #phy-cells: must be 0
> >> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
> >> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
> >> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
> >
> > You can drop this as it is now just the parent node.
> >
> >> +- hisilicon,eye-diagram-param: parameter set for phy
> >> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
> >> +
> >> +This is a subnode of usb3_otg_bc register node.
> >> +
> >> +Example:
> >> +    usb3_otg_bc: usb3_otg_bc@ff200000 {
> >> +            compatible = "syscon", "simple-mfd";
> >
> > This node should have a specific compatible.
> >
> Do you mean I need write a specific driver for this node ?

No, only that you could if needed in the future. You can still use the
fallbacks for now.

Rob

[v3,01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY

[Rob Herring]

On Tue, Mar 12, 2019 at 8:40 PM Chen Yu <chenyu56@huawei.com> wrote:
>
> Hi Rob,
>
> On 2019/3/12 21:45, Rob Herring wrote:
> > On Sat, Mar 02, 2019 at 05:04:54PM +0800, Yu Chen wrote:
> >> This patch adds binding documentation for supporting the hi3660 usb
> >> phy on boards like the HiKey960.
> >>
> >> Cc: Rob Herring <robh+dt@kernel.org>
> >> Cc: Mark Rutland <mark.rutland@arm.com>
> >> Cc: John Stultz <john.stultz@linaro.org>
> >> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> >> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> >> ---
> >> v1:
> >> * Fix some format error as suggested by Rob.
> >> v2:
> >> * Change hi3660 usb PHY to hi3660 USB PHY
> >> v3:
> >> * Make device node a subnode of usb3_otg_bc register.
> >> ---
> >> ---
> >>  .../devicetree/bindings/phy/phy-hi3660-usb3.txt    | 28 ++++++++++++++++++++++
> >>  1 file changed, 28 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >> new file mode 100644
> >> index 000000000000..6096214a2bc6
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >> @@ -0,0 +1,28 @@
> >> +Hisilicon hi3660 USB PHY
> >> +-----------------------
> >> +
> >> +Required properties:
> >> +- compatible: should be "hisilicon,hi3660-usb-phy"
> >> +- #phy-cells: must be 0
> >> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
> >> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
> >> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
> >
> > You can drop this as it is now just the parent node.
> >
> >> +- hisilicon,eye-diagram-param: parameter set for phy
> >> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
> >> +
> >> +This is a subnode of usb3_otg_bc register node.
> >> +
> >> +Example:
> >> +    usb3_otg_bc: usb3_otg_bc@ff200000 {
> >> +            compatible = "syscon", "simple-mfd";
> >
> > This node should have a specific compatible.
> >
> Do you mean I need write a specific driver for this node ?

No, only that you could if needed in the future. You can still use the
fallbacks for now.

Rob

[PATCH v3 02/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960

[Yu Chen]

This patch adds binding documentation to support usb hub and usb
data role switch of Hisilicon HiKey960 Board.

Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Fix some format errors as suggested by Sergei.
* Modify gpio description to use gpiod API.
v2:
* Remove information about Hikey.
* Fix gpio description.
* Remove device_type of endpoint.
v3:
* Remove property typec-vbus-enable-val.
* Add description of pinctrl-names.
* Add example for "hisilicon,gpio-hubv1"
* Add flag in gpiod properties.
---
---
 .../bindings/misc/hisilicon-hikey-usb.txt          | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt

diff --git a/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
new file mode 100644
index 000000000000..422e844df719
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
@@ -0,0 +1,52 @@
+Support usb hub and usb data role switch of Hisilicon HiKey960 Board.
+
+-----------------------------
+
+Required properties:
+- compatible: "hisilicon,gpio-hubv1","hisilicon,hikey960-usb"
+- typec-vbus-gpios: gpio to control the vbus of typeC port
+- otg-switch-gpios: gpio to switch DP & DM between the hub and typeC port
+- hub-vdd33-en-gpios: gpio to enable the power of hub
+- pinctrl-names: pin configuration state name ("default")
+- pinctrl-0: pinctrl config
+
+Example
+-----
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,hikey960-usb";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,gpio-hubv1";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_LOW>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
-- 
2.15.0-rc2

[v3,02/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960

[Yu Chen]

This patch adds binding documentation to support usb hub and usb
data role switch of Hisilicon HiKey960 Board.

Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Fix some format errors as suggested by Sergei.
* Modify gpio description to use gpiod API.
v2:
* Remove information about Hikey.
* Fix gpio description.
* Remove device_type of endpoint.
v3:
* Remove property typec-vbus-enable-val.
* Add description of pinctrl-names.
* Add example for "hisilicon,gpio-hubv1"
* Add flag in gpiod properties.
---
---
 .../bindings/misc/hisilicon-hikey-usb.txt          | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt

diff --git a/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
new file mode 100644
index 000000000000..422e844df719
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
@@ -0,0 +1,52 @@
+Support usb hub and usb data role switch of Hisilicon HiKey960 Board.
+
+-----------------------------
+
+Required properties:
+- compatible: "hisilicon,gpio-hubv1","hisilicon,hikey960-usb"
+- typec-vbus-gpios: gpio to control the vbus of typeC port
+- otg-switch-gpios: gpio to switch DP & DM between the hub and typeC port
+- hub-vdd33-en-gpios: gpio to enable the power of hub
+- pinctrl-names: pin configuration state name ("default")
+- pinctrl-0: pinctrl config
+
+Example
+-----
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,hikey960-usb";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,gpio-hubv1";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_LOW>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};

[PATCH v3 02/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960

[Yu Chen]

This patch adds binding documentation to support usb hub and usb
data role switch of Hisilicon HiKey960 Board.

Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Fix some format errors as suggested by Sergei.
* Modify gpio description to use gpiod API.
v2:
* Remove information about Hikey.
* Fix gpio description.
* Remove device_type of endpoint.
v3:
* Remove property typec-vbus-enable-val.
* Add description of pinctrl-names.
* Add example for "hisilicon,gpio-hubv1"
* Add flag in gpiod properties.
---
---
 .../bindings/misc/hisilicon-hikey-usb.txt          | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt

diff --git a/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
new file mode 100644
index 000000000000..422e844df719
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
@@ -0,0 +1,52 @@
+Support usb hub and usb data role switch of Hisilicon HiKey960 Board.
+
+-----------------------------
+
+Required properties:
+- compatible: "hisilicon,gpio-hubv1","hisilicon,hikey960-usb"
+- typec-vbus-gpios: gpio to control the vbus of typeC port
+- otg-switch-gpios: gpio to switch DP & DM between the hub and typeC port
+- hub-vdd33-en-gpios: gpio to enable the power of hub
+- pinctrl-names: pin configuration state name ("default")
+- pinctrl-0: pinctrl config
+
+Example
+-----
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,hikey960-usb";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,gpio-hubv1";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_LOW>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
-- 
2.15.0-rc2

[PATCH v3 03/12] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform

[Yu Chen]

This patch adds support for the poweron and shutdown of dwc3 core
on Hisilicon Soc Platform.
---
 drivers/usb/dwc3/dwc3-of-simple.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 4c2771c5e727..0ed09d876542 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -98,7 +98,8 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	 * Some controllers need to toggle the usb3-otg reset before trying to
 	 * initialize the PHY, otherwise the PHY times out.
 	 */
-	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
+	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3") ||
+			of_device_is_compatible(np, "hisilicon,hi3660-dwc3"))
 		simple->need_reset = true;
 
 	if (of_device_is_compatible(np, "amlogic,meson-axg-dwc3") ||
@@ -243,6 +244,7 @@ static const struct of_device_id of_dwc3_simple_match[] = {
 	{ .compatible = "amlogic,meson-axg-dwc3" },
 	{ .compatible = "amlogic,meson-gxl-dwc3" },
 	{ .compatible = "allwinner,sun50i-h6-dwc3" },
+	{ .compatible = "hisilicon,hi3660-dwc3" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
-- 
2.15.0-rc2

[v3,03/12] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform

[Yu Chen]

This patch adds support for the poweron and shutdown of dwc3 core
on Hisilicon Soc Platform.
---
 drivers/usb/dwc3/dwc3-of-simple.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 4c2771c5e727..0ed09d876542 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -98,7 +98,8 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	 * Some controllers need to toggle the usb3-otg reset before trying to
 	 * initialize the PHY, otherwise the PHY times out.
 	 */
-	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
+	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3") ||
+			of_device_is_compatible(np, "hisilicon,hi3660-dwc3"))
 		simple->need_reset = true;
 
 	if (of_device_is_compatible(np, "amlogic,meson-axg-dwc3") ||
@@ -243,6 +244,7 @@ static const struct of_device_id of_dwc3_simple_match[] = {
 	{ .compatible = "amlogic,meson-axg-dwc3" },
 	{ .compatible = "amlogic,meson-gxl-dwc3" },
 	{ .compatible = "allwinner,sun50i-h6-dwc3" },
+	{ .compatible = "hisilicon,hi3660-dwc3" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);

[PATCH v3 03/12] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform

[Yu Chen]

This patch adds support for the poweron and shutdown of dwc3 core
on Hisilicon Soc Platform.
---
 drivers/usb/dwc3/dwc3-of-simple.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 4c2771c5e727..0ed09d876542 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -98,7 +98,8 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	 * Some controllers need to toggle the usb3-otg reset before trying to
 	 * initialize the PHY, otherwise the PHY times out.
 	 */
-	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
+	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3") ||
+			of_device_is_compatible(np, "hisilicon,hi3660-dwc3"))
 		simple->need_reset = true;
 
 	if (of_device_is_compatible(np, "amlogic,meson-axg-dwc3") ||
@@ -243,6 +244,7 @@ static const struct of_device_id of_dwc3_simple_match[] = {
 	{ .compatible = "amlogic,meson-axg-dwc3" },
 	{ .compatible = "amlogic,meson-gxl-dwc3" },
 	{ .compatible = "allwinner,sun50i-h6-dwc3" },
+	{ .compatible = "hisilicon,hi3660-dwc3" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
-- 
2.15.0-rc2

[PATCH v3 04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[Yu Chen]

SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
of Hisilicon Kirin Soc when dwc3 core act as host.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/core.c | 24 ++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  6 ++++++
 2 files changed, 30 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a1b126f90261..f7d561fe1f04 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -117,6 +117,7 @@ static void __dwc3_set_mode(struct work_struct *work)
 	struct dwc3 *dwc = work_to_dwc(work);
 	unsigned long flags;
 	int ret;
+	u32 reg;
 
 	if (dwc->dr_mode != USB_DR_MODE_OTG)
 		return;
@@ -169,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
 			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
 			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
 			phy_calibrate(dwc->usb2_generic_phy);
+			if (dwc->dis_split_quirk) {
+				reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+				reg |= DWC3_GUCTL3_SPLITDISABLE;
+				dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+			}
 		}
 		break;
 	case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1306,6 +1312,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
 				"snps,dis_metastability_quirk");
 
+	dwc->dis_split_quirk = device_property_read_bool(dev,
+				"snps,dis-split-quirk");
+
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
 
@@ -1825,10 +1834,25 @@ static int dwc3_resume(struct device *dev)
 
 	return 0;
 }
+
+static void dwc3_complete(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	u32		reg;
+
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+			dwc->dis_split_quirk) {
+		dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+		reg |= DWC3_GUCTL3_SPLITDISABLE;
+		dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+	}
+}
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+	.complete = dwc3_complete,
 	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
 			dwc3_runtime_idle)
 };
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index df876418cb78..bc2a1ebc0076 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -136,6 +136,7 @@
 #define DWC3_GEVNTCOUNT(n)	(0xc40c + ((n) * 0x10))
 
 #define DWC3_GHWPARAMS8		0xc600
+#define DWC3_GUCTL3		0xc60c
 #define DWC3_GFLADJ		0xc630
 
 /* Device Registers */
@@ -370,6 +371,9 @@
 /* Global User Control Register 2 */
 #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
 
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE		BIT(14)
+
 /* Device Configuration Register */
 #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
 #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
@@ -1210,6 +1214,8 @@ struct dwc3 {
 
 	unsigned		dis_metastability_quirk:1;
 
+	unsigned		dis_split_quirk:1;
+
 	u16			imod_interval;
 };
 
-- 
2.15.0-rc2

[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[Yu Chen]

SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
of Hisilicon Kirin Soc when dwc3 core act as host.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/core.c | 24 ++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  6 ++++++
 2 files changed, 30 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a1b126f90261..f7d561fe1f04 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -117,6 +117,7 @@ static void __dwc3_set_mode(struct work_struct *work)
 	struct dwc3 *dwc = work_to_dwc(work);
 	unsigned long flags;
 	int ret;
+	u32 reg;
 
 	if (dwc->dr_mode != USB_DR_MODE_OTG)
 		return;
@@ -169,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
 			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
 			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
 			phy_calibrate(dwc->usb2_generic_phy);
+			if (dwc->dis_split_quirk) {
+				reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+				reg |= DWC3_GUCTL3_SPLITDISABLE;
+				dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+			}
 		}
 		break;
 	case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1306,6 +1312,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
 				"snps,dis_metastability_quirk");
 
+	dwc->dis_split_quirk = device_property_read_bool(dev,
+				"snps,dis-split-quirk");
+
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
 
@@ -1825,10 +1834,25 @@ static int dwc3_resume(struct device *dev)
 
 	return 0;
 }
+
+static void dwc3_complete(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	u32		reg;
+
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+			dwc->dis_split_quirk) {
+		dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+		reg |= DWC3_GUCTL3_SPLITDISABLE;
+		dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+	}
+}
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+	.complete = dwc3_complete,
 	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
 			dwc3_runtime_idle)
 };
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index df876418cb78..bc2a1ebc0076 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -136,6 +136,7 @@
 #define DWC3_GEVNTCOUNT(n)	(0xc40c + ((n) * 0x10))
 
 #define DWC3_GHWPARAMS8		0xc600
+#define DWC3_GUCTL3		0xc60c
 #define DWC3_GFLADJ		0xc630
 
 /* Device Registers */
@@ -370,6 +371,9 @@
 /* Global User Control Register 2 */
 #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
 
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE		BIT(14)
+
 /* Device Configuration Register */
 #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
 #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
@@ -1210,6 +1214,8 @@ struct dwc3 {
 
 	unsigned		dis_metastability_quirk:1;
 
+	unsigned		dis_split_quirk:1;
+
 	u16			imod_interval;
 };
 

[PATCH v3 04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[Yu Chen]

SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
of Hisilicon Kirin Soc when dwc3 core act as host.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/core.c | 24 ++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  6 ++++++
 2 files changed, 30 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a1b126f90261..f7d561fe1f04 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -117,6 +117,7 @@ static void __dwc3_set_mode(struct work_struct *work)
 	struct dwc3 *dwc = work_to_dwc(work);
 	unsigned long flags;
 	int ret;
+	u32 reg;
 
 	if (dwc->dr_mode != USB_DR_MODE_OTG)
 		return;
@@ -169,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
 			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
 			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
 			phy_calibrate(dwc->usb2_generic_phy);
+			if (dwc->dis_split_quirk) {
+				reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+				reg |= DWC3_GUCTL3_SPLITDISABLE;
+				dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+			}
 		}
 		break;
 	case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1306,6 +1312,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
 				"snps,dis_metastability_quirk");
 
+	dwc->dis_split_quirk = device_property_read_bool(dev,
+				"snps,dis-split-quirk");
+
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
 
@@ -1825,10 +1834,25 @@ static int dwc3_resume(struct device *dev)
 
 	return 0;
 }
+
+static void dwc3_complete(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	u32		reg;
+
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+			dwc->dis_split_quirk) {
+		dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+		reg |= DWC3_GUCTL3_SPLITDISABLE;
+		dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+	}
+}
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+	.complete = dwc3_complete,
 	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
 			dwc3_runtime_idle)
 };
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index df876418cb78..bc2a1ebc0076 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -136,6 +136,7 @@
 #define DWC3_GEVNTCOUNT(n)	(0xc40c + ((n) * 0x10))
 
 #define DWC3_GHWPARAMS8		0xc600
+#define DWC3_GUCTL3		0xc60c
 #define DWC3_GFLADJ		0xc630
 
 /* Device Registers */
@@ -370,6 +371,9 @@
 /* Global User Control Register 2 */
 #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
 
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE		BIT(14)
+
 /* Device Configuration Register */
 #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
 #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
@@ -1210,6 +1214,8 @@ struct dwc3 {
 
 	unsigned		dis_metastability_quirk:1;
 
+	unsigned		dis_split_quirk:1;
+
 	u16			imod_interval;
 };
 
-- 
2.15.0-rc2

Re: [PATCH v3 04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1345 bytes --]

Hi Yu,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on balbi-usb/next]
[also build test ERROR on v5.0 next-20190304]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: x86_64-randconfig-x010-201909 (attached as .config)
compiler: gcc-8 (Debian 8.2.0-21) 8.2.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> drivers/usb/dwc3/core.c:1855:14: error: 'dwc3_complete' undeclared here (not in a function); did you mean 'complete'?
     .complete = dwc3_complete,
                 ^~~~~~~~~~~~~
                 complete

vim +1855 drivers/usb/dwc3/core.c

  1852	
  1853	static const struct dev_pm_ops dwc3_dev_pm_ops = {
  1854		SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
> 1855		.complete = dwc3_complete,
  1856		SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
  1857				dwc3_runtime_idle)
  1858	};
  1859	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 34874 bytes --]

[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[kbuild test robot]

Hi Yu,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on balbi-usb/next]
[also build test ERROR on v5.0 next-20190304]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: x86_64-randconfig-x010-201909 (attached as .config)
compiler: gcc-8 (Debian 8.2.0-21) 8.2.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> drivers/usb/dwc3/core.c:1855:14: error: 'dwc3_complete' undeclared here (not in a function); did you mean 'complete'?
     .complete = dwc3_complete,
                 ^~~~~~~~~~~~~
                 complete

vim +1855 drivers/usb/dwc3/core.c

  1852	
  1853	static const struct dev_pm_ops dwc3_dev_pm_ops = {
  1854		SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
> 1855		.complete = dwc3_complete,
  1856		SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
  1857				dwc3_runtime_idle)
  1858	};
  1859
---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Re: [PATCH v3 04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1345 bytes --]

Hi Yu,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on balbi-usb/next]
[also build test ERROR on v5.0 next-20190304]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: x86_64-randconfig-x010-201909 (attached as .config)
compiler: gcc-8 (Debian 8.2.0-21) 8.2.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> drivers/usb/dwc3/core.c:1855:14: error: 'dwc3_complete' undeclared here (not in a function); did you mean 'complete'?
     .complete = dwc3_complete,
                 ^~~~~~~~~~~~~
                 complete

vim +1855 drivers/usb/dwc3/core.c

  1852	
  1853	static const struct dev_pm_ops dwc3_dev_pm_ops = {
  1854		SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
> 1855		.complete = dwc3_complete,
  1856		SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
  1857				dwc3_runtime_idle)
  1858	};
  1859	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 34874 bytes --]

Re: [PATCH v3 04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1305 bytes --]

Hi Yu,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on balbi-usb/next]
[also build test ERROR on v5.0 next-20190304]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: x86_64-randconfig-u0-03051004 (attached as .config)
compiler: gcc-5 (Debian 5.5.0-3) 5.4.1 20171010
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> drivers/usb/dwc3/core.c:1855:14: error: 'dwc3_complete' undeclared here (not in a function)
     .complete = dwc3_complete,
                 ^

vim +/dwc3_complete +1855 drivers/usb/dwc3/core.c

  1852	
  1853	static const struct dev_pm_ops dwc3_dev_pm_ops = {
  1854		SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
> 1855		.complete = dwc3_complete,
  1856		SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
  1857				dwc3_runtime_idle)
  1858	};
  1859	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 30435 bytes --]

[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[kbuild test robot]

Hi Yu,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on balbi-usb/next]
[also build test ERROR on v5.0 next-20190304]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: x86_64-randconfig-u0-03051004 (attached as .config)
compiler: gcc-5 (Debian 5.5.0-3) 5.4.1 20171010
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> drivers/usb/dwc3/core.c:1855:14: error: 'dwc3_complete' undeclared here (not in a function)
     .complete = dwc3_complete,
                 ^

vim +/dwc3_complete +1855 drivers/usb/dwc3/core.c

  1852	
  1853	static const struct dev_pm_ops dwc3_dev_pm_ops = {
  1854		SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
> 1855		.complete = dwc3_complete,
  1856		SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
  1857				dwc3_runtime_idle)
  1858	};
  1859
---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Re: [PATCH v3 04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1305 bytes --]

Hi Yu,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on balbi-usb/next]
[also build test ERROR on v5.0 next-20190304]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: x86_64-randconfig-u0-03051004 (attached as .config)
compiler: gcc-5 (Debian 5.5.0-3) 5.4.1 20171010
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> drivers/usb/dwc3/core.c:1855:14: error: 'dwc3_complete' undeclared here (not in a function)
     .complete = dwc3_complete,
                 ^

vim +/dwc3_complete +1855 drivers/usb/dwc3/core.c

  1852	
  1853	static const struct dev_pm_ops dwc3_dev_pm_ops = {
  1854		SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
> 1855		.complete = dwc3_complete,
  1856		SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
  1857				dwc3_runtime_idle)
  1858	};
  1859	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 30435 bytes --]

[PATCH v3 05/12] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc

[Yu Chen]

A GCTL soft reset should be executed when switch mode for dwc3 core
of Hisilicon Kirin Soc.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/core.c | 19 +++++++++++++++++++
 drivers/usb/dwc3/core.h |  1 +
 2 files changed, 20 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f7d561fe1f04..f260977f0206 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -112,6 +112,19 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 	dwc->current_dr_role = mode;
 }
 
+static void dwc3_gctl_core_soft_reset(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg |= DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
 static void __dwc3_set_mode(struct work_struct *work)
 {
 	struct dwc3 *dwc = work_to_dwc(work);
@@ -157,6 +170,10 @@ static void __dwc3_set_mode(struct work_struct *work)
 
 	dwc3_set_prtcap(dwc, dwc->desired_dr_role);
 
+	/* Execute a GCTL Core Soft Reset when switch mode */
+	if (dwc->gctl_reset_quirk)
+		dwc3_gctl_core_soft_reset(dwc);
+
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	switch (dwc->desired_dr_role) {
@@ -1314,6 +1331,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 	dwc->dis_split_quirk = device_property_read_bool(dev,
 				"snps,dis-split-quirk");
+	dwc->gctl_reset_quirk = device_property_read_bool(dev,
+				"snps,gctl-reset-quirk");
 
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index bc2a1ebc0076..402b3c29eb26 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1215,6 +1215,7 @@ struct dwc3 {
 	unsigned		dis_metastability_quirk:1;
 
 	unsigned		dis_split_quirk:1;
+	unsigned		gctl_reset_quirk:1;
 
 	u16			imod_interval;
 };
-- 
2.15.0-rc2

[v3,05/12] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc

[Yu Chen]

A GCTL soft reset should be executed when switch mode for dwc3 core
of Hisilicon Kirin Soc.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/core.c | 19 +++++++++++++++++++
 drivers/usb/dwc3/core.h |  1 +
 2 files changed, 20 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f7d561fe1f04..f260977f0206 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -112,6 +112,19 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 	dwc->current_dr_role = mode;
 }
 
+static void dwc3_gctl_core_soft_reset(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg |= DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
 static void __dwc3_set_mode(struct work_struct *work)
 {
 	struct dwc3 *dwc = work_to_dwc(work);
@@ -157,6 +170,10 @@ static void __dwc3_set_mode(struct work_struct *work)
 
 	dwc3_set_prtcap(dwc, dwc->desired_dr_role);
 
+	/* Execute a GCTL Core Soft Reset when switch mode */
+	if (dwc->gctl_reset_quirk)
+		dwc3_gctl_core_soft_reset(dwc);
+
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	switch (dwc->desired_dr_role) {
@@ -1314,6 +1331,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 	dwc->dis_split_quirk = device_property_read_bool(dev,
 				"snps,dis-split-quirk");
+	dwc->gctl_reset_quirk = device_property_read_bool(dev,
+				"snps,gctl-reset-quirk");
 
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index bc2a1ebc0076..402b3c29eb26 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1215,6 +1215,7 @@ struct dwc3 {
 	unsigned		dis_metastability_quirk:1;
 
 	unsigned		dis_split_quirk:1;
+	unsigned		gctl_reset_quirk:1;
 
 	u16			imod_interval;
 };

[PATCH v3 05/12] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc

[Yu Chen]

A GCTL soft reset should be executed when switch mode for dwc3 core
of Hisilicon Kirin Soc.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/core.c | 19 +++++++++++++++++++
 drivers/usb/dwc3/core.h |  1 +
 2 files changed, 20 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f7d561fe1f04..f260977f0206 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -112,6 +112,19 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 	dwc->current_dr_role = mode;
 }
 
+static void dwc3_gctl_core_soft_reset(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg |= DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
 static void __dwc3_set_mode(struct work_struct *work)
 {
 	struct dwc3 *dwc = work_to_dwc(work);
@@ -157,6 +170,10 @@ static void __dwc3_set_mode(struct work_struct *work)
 
 	dwc3_set_prtcap(dwc, dwc->desired_dr_role);
 
+	/* Execute a GCTL Core Soft Reset when switch mode */
+	if (dwc->gctl_reset_quirk)
+		dwc3_gctl_core_soft_reset(dwc);
+
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	switch (dwc->desired_dr_role) {
@@ -1314,6 +1331,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 	dwc->dis_split_quirk = device_property_read_bool(dev,
 				"snps,dis-split-quirk");
+	dwc->gctl_reset_quirk = device_property_read_bool(dev,
+				"snps,gctl-reset-quirk");
 
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index bc2a1ebc0076..402b3c29eb26 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1215,6 +1215,7 @@ struct dwc3 {
 	unsigned		dis_metastability_quirk:1;
 
 	unsigned		dis_split_quirk:1;
+	unsigned		gctl_reset_quirk:1;
 
 	u16			imod_interval;
 };
-- 
2.15.0-rc2

[PATCH v3 06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Yu Chen]

It needs more time for the device controller to clear the CmdAct of
DEPCMD on Hisilicon Kirin Soc.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 6c9b76bcc2e1..84d701b37171 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 {
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
-	u32			timeout = 1000;
+	u32			timeout = 5000;
 	u32			saved_config = 0;
 	u32			reg;
 
-- 
2.15.0-rc2

[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Yu Chen]

It needs more time for the device controller to clear the CmdAct of
DEPCMD on Hisilicon Kirin Soc.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 6c9b76bcc2e1..84d701b37171 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 {
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
-	u32			timeout = 1000;
+	u32			timeout = 5000;
 	u32			saved_config = 0;
 	u32			reg;
 

[PATCH v3 06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Yu Chen]

It needs more time for the device controller to clear the CmdAct of
DEPCMD on Hisilicon Kirin Soc.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 6c9b76bcc2e1..84d701b37171 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 {
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
-	u32			timeout = 1000;
+	u32			timeout = 5000;
 	u32			saved_config = 0;
 	u32			reg;
 
-- 
2.15.0-rc2

Re: [PATCH v3 06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Andy Shevchenko]

On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>
> It needs more time for the device controller to clear the CmdAct of
> DEPCMD on Hisilicon Kirin Soc.
>

5x times more? Can you provide more specific details on that?

> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Felipe Balbi <balbi@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
>  drivers/usb/dwc3/gadget.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 6c9b76bcc2e1..84d701b37171 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
>  {
>         const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
>         struct dwc3             *dwc = dep->dwc;
> -       u32                     timeout = 1000;
> +       u32                     timeout = 5000;
>         u32                     saved_config = 0;
>         u32                     reg;
>
> --
> 2.15.0-rc2
>


-- 
With Best Regards,
Andy Shevchenko

[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Andy Shevchenko]

On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>
> It needs more time for the device controller to clear the CmdAct of
> DEPCMD on Hisilicon Kirin Soc.
>

5x times more? Can you provide more specific details on that?

> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Felipe Balbi <balbi@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
>  drivers/usb/dwc3/gadget.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 6c9b76bcc2e1..84d701b37171 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
>  {
>         const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
>         struct dwc3             *dwc = dep->dwc;
> -       u32                     timeout = 1000;
> +       u32                     timeout = 5000;
>         u32                     saved_config = 0;
>         u32                     reg;
>
> --
> 2.15.0-rc2
>

//Re: [PATCH v3 06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Chen Yu]

Hi Zhang Fei,

On 2019/3/2 23:47, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> It needs more time for the device controller to clear the CmdAct of
>> DEPCMD on Hisilicon Kirin Soc.
>>
> 
> 5x times more? Can you provide more specific details on that?
> 
Can you explain the details about the timeout expansion on Hisilicon Kirin Soc?
Thanks!

>> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
>> Cc: Felipe Balbi <balbi@kernel.org>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Cc: John Stultz <john.stultz@linaro.org>
>> Cc: Binghui Wang <wangbinghui@hisilicon.com>
>> Signed-off-by: Yu Chen <chenyu56@huawei.com>
>> ---
>>  drivers/usb/dwc3/gadget.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 6c9b76bcc2e1..84d701b37171 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
>>  {
>>         const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
>>         struct dwc3             *dwc = dep->dwc;
>> -       u32                     timeout = 1000;
>> +       u32                     timeout = 5000;
>>         u32                     saved_config = 0;
>>         u32                     reg;
>>
>> --
>> 2.15.0-rc2
>>
> 
> 

[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Yu Chen]

Hi Zhang Fei,

On 2019/3/2 23:47, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> It needs more time for the device controller to clear the CmdAct of
>> DEPCMD on Hisilicon Kirin Soc.
>>
> 
> 5x times more? Can you provide more specific details on that?
> 
Can you explain the details about the timeout expansion on Hisilicon Kirin Soc?
Thanks!

>> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
>> Cc: Felipe Balbi <balbi@kernel.org>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Cc: John Stultz <john.stultz@linaro.org>
>> Cc: Binghui Wang <wangbinghui@hisilicon.com>
>> Signed-off-by: Yu Chen <chenyu56@huawei.com>
>> ---
>>  drivers/usb/dwc3/gadget.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 6c9b76bcc2e1..84d701b37171 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
>>  {
>>         const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
>>         struct dwc3             *dwc = dep->dwc;
>> -       u32                     timeout = 1000;
>> +       u32                     timeout = 5000;
>>         u32                     saved_config = 0;
>>         u32                     reg;
>>
>> --
>> 2.15.0-rc2
>>
> 
>

//Re: [PATCH v3 06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Chen Yu]

Hi Zhang Fei,

On 2019/3/2 23:47, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> It needs more time for the device controller to clear the CmdAct of
>> DEPCMD on Hisilicon Kirin Soc.
>>
> 
> 5x times more? Can you provide more specific details on that?
> 
Can you explain the details about the timeout expansion on Hisilicon Kirin Soc?
Thanks!

>> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
>> Cc: Felipe Balbi <balbi@kernel.org>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Cc: John Stultz <john.stultz@linaro.org>
>> Cc: Binghui Wang <wangbinghui@hisilicon.com>
>> Signed-off-by: Yu Chen <chenyu56@huawei.com>
>> ---
>>  drivers/usb/dwc3/gadget.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 6c9b76bcc2e1..84d701b37171 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
>>  {
>>         const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
>>         struct dwc3             *dwc = dep->dwc;
>> -       u32                     timeout = 1000;
>> +       u32                     timeout = 5000;
>>         u32                     saved_config = 0;
>>         u32                     reg;
>>
>> --
>> 2.15.0-rc2
>>
> 
> 

[PATCH v3 07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Yu Chen]

This driver handles usb phy power on and shutdown for hi3660 Soc of
Hisilicon.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Pengcheng Li <lpc.li@hisilicon.com>
Cc: Jianguo Sun <sunjianguo1@huawei.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Jiancheng Xue <xuejiancheng@hisilicon.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Remove unused code and add comment for time delay as suggested by
Kishon Vijay Abraham I.
v2:
* Fix license declaration.
* Remove redundant parens.
* Remove unused member variables in struct hi3660_priv.
---
---
 MAINTAINERS                             |   8 ++
 drivers/phy/hisilicon/Kconfig           |  10 ++
 drivers/phy/hisilicon/Makefile          |   1 +
 drivers/phy/hisilicon/phy-hi3660-usb3.c | 232 ++++++++++++++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 drivers/phy/hisilicon/phy-hi3660-usb3.c

diff --git a/MAINTAINERS b/MAINTAINERS
index dce5c099f43c..ac2e518ab85f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15822,6 +15822,14 @@ L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/roles/intel-xhci-usb-role-switch.c
 
+USB IP DRIVER FOR HISILICON KIRIN
+M:	Yu Chen <chenyu56@huawei.com>
+M:	Binghui Wang <wangbinghui@hisilicon.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
+F:	drivers/phy/hisilicon/phy-hi3660-usb3.c
+
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index b40ee54a1a50..3c142f08987c 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -12,6 +12,16 @@ config PHY_HI6220_USB
 
 	  To compile this driver as a module, choose M here.
 
+config PHY_HI3660_USB
+	tristate "hi3660 USB PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI3660 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config PHY_HISTB_COMBPHY
 	tristate "HiSilicon STB SoCs COMBPHY support"
 	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index f662a4fe18d8..75ba64e2faf8 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
+obj-$(CONFIG_PHY_HI3660_USB)		+= phy-hi3660-usb3.o
 obj-$(CONFIG_PHY_HISTB_COMBPHY)		+= phy-histb-combphy.o
 obj-$(CONFIG_PHY_HISI_INNO_USB2)	+= phy-hisi-inno-usb2.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
new file mode 100644
index 000000000000..97184e6f0d41
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PERI_CRG_CLK_EN4			0x40
+#define PERI_CRG_CLK_DIS4			0x44
+#define GT_CLK_USB3OTG_REF			BIT(0)
+#define GT_ACLK_USB3OTG				BIT(1)
+
+#define PERI_CRG_RSTEN4				0x90
+#define PERI_CRG_RSTDIS4			0x94
+#define IP_RST_USB3OTGPHY_POR			BIT(3)
+#define IP_RST_USB3OTG				BIT(5)
+
+#define PERI_CRG_ISODIS				0x148
+#define USB_REFCLK_ISO_EN			BIT(25)
+
+#define PCTRL_PERI_CTRL3			0x10
+#define PCTRL_PERI_CTRL3_MSK_START		16
+#define USB_TCXO_EN				BIT(1)
+
+#define PCTRL_PERI_CTRL24			0x64
+#define SC_CLK_USB3PHY_3MUX1_SEL		BIT(25)
+
+#define USBOTG3_CTRL0				0x00
+#define SC_USB3PHY_ABB_GT_EN			BIT(15)
+
+#define USBOTG3_CTRL2				0x08
+#define USBOTG3CTRL2_POWERDOWN_HSP		BIT(0)
+#define USBOTG3CTRL2_POWERDOWN_SSP		BIT(1)
+
+#define USBOTG3_CTRL3				0x0C
+#define USBOTG3_CTRL3_VBUSVLDEXT		BIT(6)
+#define USBOTG3_CTRL3_VBUSVLDEXTSEL		BIT(5)
+
+#define USBOTG3_CTRL4				0x10
+
+#define USBOTG3_CTRL7				0x1c
+#define REF_SSP_EN				BIT(16)
+
+#define HI3660_USB_DEFAULT_PHY_PARAM		0x1c466e3
+
+struct hi3660_priv {
+	struct device *dev;
+	struct regmap *peri_crg;
+	struct regmap *pctrl;
+	struct regmap *otg_bc;
+	u32 eye_diagram_param;
+};
+
+static int hi3660_phy_init(struct phy *phy)
+{
+	struct hi3660_priv *priv = phy_get_drvdata(phy);
+	u32 val, mask;
+	int ret;
+
+	/* usb refclk iso disable */
+	ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
+	if (ret)
+		goto out;
+
+	/* enable usb_tcxo_en */
+	val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+	if (ret)
+		goto out;
+
+	/* assert phy */
+	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+	if (ret)
+		goto out;
+
+	/* enable phy ref clk */
+	val = SC_USB3PHY_ABB_GT_EN;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
+	if (ret)
+		goto out;
+
+	val = REF_SSP_EN;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
+	if (ret)
+		goto out;
+
+	/* exit from IDDQ mode */
+	mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
+	if (ret)
+		goto out;
+
+	/* delay for exit from IDDQ mode */
+	usleep_range(100, 100);
+
+	/* deassert phy */
+	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
+	if (ret)
+		goto out;
+
+	/* delay for phy deasserted */
+	usleep_range(10000, 15000);
+
+	/* fake vbus valid signal */
+	val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
+	if (ret)
+		goto out;
+
+	/* delay for vbus valid */
+	usleep_range(100, 100);
+
+	ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
+			priv->eye_diagram_param);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+	return ret;
+}
+
+static int hi3660_phy_exit(struct phy *phy)
+{
+	struct hi3660_priv *priv = phy_get_drvdata(phy);
+	u32 val;
+	int ret;
+
+	/* assert phy */
+	val = IP_RST_USB3OTGPHY_POR;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+	if (ret)
+		goto out;
+
+	/* disable usb_tcxo_en */
+	val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
+	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+	return ret;
+}
+
+static struct phy_ops hi3660_phy_ops = {
+	.init		= hi3660_phy_init,
+	.exit		= hi3660_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int hi3660_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy *phy;
+	struct hi3660_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,pericrg-syscon");
+	if (IS_ERR(priv->peri_crg)) {
+		dev_err(dev, "no hisilicon,pericrg-syscon\n");
+		return PTR_ERR(priv->peri_crg);
+	}
+
+	priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,pctrl-syscon");
+	if (IS_ERR(priv->pctrl)) {
+		dev_err(dev, "no hisilicon,pctrl-syscon\n");
+		return PTR_ERR(priv->pctrl);
+	}
+
+	priv->otg_bc = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,usb3-otg-bc-syscon");
+	if (IS_ERR(priv->otg_bc)) {
+		dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+		return PTR_ERR(priv->otg_bc);
+	}
+
+	if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+		&(priv->eye_diagram_param)))
+		priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
+
+	phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3660_phy_of_match[] = {
+	{.compatible = "hisilicon,hi3660-usb-phy",},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
+
+static struct platform_driver hi3660_phy_driver = {
+	.probe	= hi3660_phy_probe,
+	.driver = {
+		.name	= "hi3660-usb-phy",
+		.of_match_table	= hi3660_phy_of_match,
+	}
+};
+module_platform_driver(hi3660_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");
-- 
2.15.0-rc2

[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Yu Chen]

This driver handles usb phy power on and shutdown for hi3660 Soc of
Hisilicon.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Pengcheng Li <lpc.li@hisilicon.com>
Cc: Jianguo Sun <sunjianguo1@huawei.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Jiancheng Xue <xuejiancheng@hisilicon.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Remove unused code and add comment for time delay as suggested by
Kishon Vijay Abraham I.
v2:
* Fix license declaration.
* Remove redundant parens.
* Remove unused member variables in struct hi3660_priv.
---
---
 MAINTAINERS                             |   8 ++
 drivers/phy/hisilicon/Kconfig           |  10 ++
 drivers/phy/hisilicon/Makefile          |   1 +
 drivers/phy/hisilicon/phy-hi3660-usb3.c | 232 ++++++++++++++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 drivers/phy/hisilicon/phy-hi3660-usb3.c

diff --git a/MAINTAINERS b/MAINTAINERS
index dce5c099f43c..ac2e518ab85f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15822,6 +15822,14 @@ L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/roles/intel-xhci-usb-role-switch.c
 
+USB IP DRIVER FOR HISILICON KIRIN
+M:	Yu Chen <chenyu56@huawei.com>
+M:	Binghui Wang <wangbinghui@hisilicon.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
+F:	drivers/phy/hisilicon/phy-hi3660-usb3.c
+
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index b40ee54a1a50..3c142f08987c 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -12,6 +12,16 @@ config PHY_HI6220_USB
 
 	  To compile this driver as a module, choose M here.
 
+config PHY_HI3660_USB
+	tristate "hi3660 USB PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI3660 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config PHY_HISTB_COMBPHY
 	tristate "HiSilicon STB SoCs COMBPHY support"
 	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index f662a4fe18d8..75ba64e2faf8 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
+obj-$(CONFIG_PHY_HI3660_USB)		+= phy-hi3660-usb3.o
 obj-$(CONFIG_PHY_HISTB_COMBPHY)		+= phy-histb-combphy.o
 obj-$(CONFIG_PHY_HISI_INNO_USB2)	+= phy-hisi-inno-usb2.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
new file mode 100644
index 000000000000..97184e6f0d41
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PERI_CRG_CLK_EN4			0x40
+#define PERI_CRG_CLK_DIS4			0x44
+#define GT_CLK_USB3OTG_REF			BIT(0)
+#define GT_ACLK_USB3OTG				BIT(1)
+
+#define PERI_CRG_RSTEN4				0x90
+#define PERI_CRG_RSTDIS4			0x94
+#define IP_RST_USB3OTGPHY_POR			BIT(3)
+#define IP_RST_USB3OTG				BIT(5)
+
+#define PERI_CRG_ISODIS				0x148
+#define USB_REFCLK_ISO_EN			BIT(25)
+
+#define PCTRL_PERI_CTRL3			0x10
+#define PCTRL_PERI_CTRL3_MSK_START		16
+#define USB_TCXO_EN				BIT(1)
+
+#define PCTRL_PERI_CTRL24			0x64
+#define SC_CLK_USB3PHY_3MUX1_SEL		BIT(25)
+
+#define USBOTG3_CTRL0				0x00
+#define SC_USB3PHY_ABB_GT_EN			BIT(15)
+
+#define USBOTG3_CTRL2				0x08
+#define USBOTG3CTRL2_POWERDOWN_HSP		BIT(0)
+#define USBOTG3CTRL2_POWERDOWN_SSP		BIT(1)
+
+#define USBOTG3_CTRL3				0x0C
+#define USBOTG3_CTRL3_VBUSVLDEXT		BIT(6)
+#define USBOTG3_CTRL3_VBUSVLDEXTSEL		BIT(5)
+
+#define USBOTG3_CTRL4				0x10
+
+#define USBOTG3_CTRL7				0x1c
+#define REF_SSP_EN				BIT(16)
+
+#define HI3660_USB_DEFAULT_PHY_PARAM		0x1c466e3
+
+struct hi3660_priv {
+	struct device *dev;
+	struct regmap *peri_crg;
+	struct regmap *pctrl;
+	struct regmap *otg_bc;
+	u32 eye_diagram_param;
+};
+
+static int hi3660_phy_init(struct phy *phy)
+{
+	struct hi3660_priv *priv = phy_get_drvdata(phy);
+	u32 val, mask;
+	int ret;
+
+	/* usb refclk iso disable */
+	ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
+	if (ret)
+		goto out;
+
+	/* enable usb_tcxo_en */
+	val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+	if (ret)
+		goto out;
+
+	/* assert phy */
+	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+	if (ret)
+		goto out;
+
+	/* enable phy ref clk */
+	val = SC_USB3PHY_ABB_GT_EN;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
+	if (ret)
+		goto out;
+
+	val = REF_SSP_EN;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
+	if (ret)
+		goto out;
+
+	/* exit from IDDQ mode */
+	mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
+	if (ret)
+		goto out;
+
+	/* delay for exit from IDDQ mode */
+	usleep_range(100, 100);
+
+	/* deassert phy */
+	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
+	if (ret)
+		goto out;
+
+	/* delay for phy deasserted */
+	usleep_range(10000, 15000);
+
+	/* fake vbus valid signal */
+	val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
+	if (ret)
+		goto out;
+
+	/* delay for vbus valid */
+	usleep_range(100, 100);
+
+	ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
+			priv->eye_diagram_param);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+	return ret;
+}
+
+static int hi3660_phy_exit(struct phy *phy)
+{
+	struct hi3660_priv *priv = phy_get_drvdata(phy);
+	u32 val;
+	int ret;
+
+	/* assert phy */
+	val = IP_RST_USB3OTGPHY_POR;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+	if (ret)
+		goto out;
+
+	/* disable usb_tcxo_en */
+	val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
+	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+	return ret;
+}
+
+static struct phy_ops hi3660_phy_ops = {
+	.init		= hi3660_phy_init,
+	.exit		= hi3660_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int hi3660_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy *phy;
+	struct hi3660_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,pericrg-syscon");
+	if (IS_ERR(priv->peri_crg)) {
+		dev_err(dev, "no hisilicon,pericrg-syscon\n");
+		return PTR_ERR(priv->peri_crg);
+	}
+
+	priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,pctrl-syscon");
+	if (IS_ERR(priv->pctrl)) {
+		dev_err(dev, "no hisilicon,pctrl-syscon\n");
+		return PTR_ERR(priv->pctrl);
+	}
+
+	priv->otg_bc = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,usb3-otg-bc-syscon");
+	if (IS_ERR(priv->otg_bc)) {
+		dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+		return PTR_ERR(priv->otg_bc);
+	}
+
+	if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+		&(priv->eye_diagram_param)))
+		priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
+
+	phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3660_phy_of_match[] = {
+	{.compatible = "hisilicon,hi3660-usb-phy",},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
+
+static struct platform_driver hi3660_phy_driver = {
+	.probe	= hi3660_phy_probe,
+	.driver = {
+		.name	= "hi3660-usb-phy",
+		.of_match_table	= hi3660_phy_of_match,
+	}
+};
+module_platform_driver(hi3660_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");

[PATCH v3 07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Yu Chen]

This driver handles usb phy power on and shutdown for hi3660 Soc of
Hisilicon.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Pengcheng Li <lpc.li@hisilicon.com>
Cc: Jianguo Sun <sunjianguo1@huawei.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Jiancheng Xue <xuejiancheng@hisilicon.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Remove unused code and add comment for time delay as suggested by
Kishon Vijay Abraham I.
v2:
* Fix license declaration.
* Remove redundant parens.
* Remove unused member variables in struct hi3660_priv.
---
---
 MAINTAINERS                             |   8 ++
 drivers/phy/hisilicon/Kconfig           |  10 ++
 drivers/phy/hisilicon/Makefile          |   1 +
 drivers/phy/hisilicon/phy-hi3660-usb3.c | 232 ++++++++++++++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 drivers/phy/hisilicon/phy-hi3660-usb3.c

diff --git a/MAINTAINERS b/MAINTAINERS
index dce5c099f43c..ac2e518ab85f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15822,6 +15822,14 @@ L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/roles/intel-xhci-usb-role-switch.c
 
+USB IP DRIVER FOR HISILICON KIRIN
+M:	Yu Chen <chenyu56@huawei.com>
+M:	Binghui Wang <wangbinghui@hisilicon.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
+F:	drivers/phy/hisilicon/phy-hi3660-usb3.c
+
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index b40ee54a1a50..3c142f08987c 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -12,6 +12,16 @@ config PHY_HI6220_USB
 
 	  To compile this driver as a module, choose M here.
 
+config PHY_HI3660_USB
+	tristate "hi3660 USB PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI3660 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config PHY_HISTB_COMBPHY
 	tristate "HiSilicon STB SoCs COMBPHY support"
 	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index f662a4fe18d8..75ba64e2faf8 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
+obj-$(CONFIG_PHY_HI3660_USB)		+= phy-hi3660-usb3.o
 obj-$(CONFIG_PHY_HISTB_COMBPHY)		+= phy-histb-combphy.o
 obj-$(CONFIG_PHY_HISI_INNO_USB2)	+= phy-hisi-inno-usb2.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
new file mode 100644
index 000000000000..97184e6f0d41
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PERI_CRG_CLK_EN4			0x40
+#define PERI_CRG_CLK_DIS4			0x44
+#define GT_CLK_USB3OTG_REF			BIT(0)
+#define GT_ACLK_USB3OTG				BIT(1)
+
+#define PERI_CRG_RSTEN4				0x90
+#define PERI_CRG_RSTDIS4			0x94
+#define IP_RST_USB3OTGPHY_POR			BIT(3)
+#define IP_RST_USB3OTG				BIT(5)
+
+#define PERI_CRG_ISODIS				0x148
+#define USB_REFCLK_ISO_EN			BIT(25)
+
+#define PCTRL_PERI_CTRL3			0x10
+#define PCTRL_PERI_CTRL3_MSK_START		16
+#define USB_TCXO_EN				BIT(1)
+
+#define PCTRL_PERI_CTRL24			0x64
+#define SC_CLK_USB3PHY_3MUX1_SEL		BIT(25)
+
+#define USBOTG3_CTRL0				0x00
+#define SC_USB3PHY_ABB_GT_EN			BIT(15)
+
+#define USBOTG3_CTRL2				0x08
+#define USBOTG3CTRL2_POWERDOWN_HSP		BIT(0)
+#define USBOTG3CTRL2_POWERDOWN_SSP		BIT(1)
+
+#define USBOTG3_CTRL3				0x0C
+#define USBOTG3_CTRL3_VBUSVLDEXT		BIT(6)
+#define USBOTG3_CTRL3_VBUSVLDEXTSEL		BIT(5)
+
+#define USBOTG3_CTRL4				0x10
+
+#define USBOTG3_CTRL7				0x1c
+#define REF_SSP_EN				BIT(16)
+
+#define HI3660_USB_DEFAULT_PHY_PARAM		0x1c466e3
+
+struct hi3660_priv {
+	struct device *dev;
+	struct regmap *peri_crg;
+	struct regmap *pctrl;
+	struct regmap *otg_bc;
+	u32 eye_diagram_param;
+};
+
+static int hi3660_phy_init(struct phy *phy)
+{
+	struct hi3660_priv *priv = phy_get_drvdata(phy);
+	u32 val, mask;
+	int ret;
+
+	/* usb refclk iso disable */
+	ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
+	if (ret)
+		goto out;
+
+	/* enable usb_tcxo_en */
+	val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+	if (ret)
+		goto out;
+
+	/* assert phy */
+	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+	if (ret)
+		goto out;
+
+	/* enable phy ref clk */
+	val = SC_USB3PHY_ABB_GT_EN;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
+	if (ret)
+		goto out;
+
+	val = REF_SSP_EN;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
+	if (ret)
+		goto out;
+
+	/* exit from IDDQ mode */
+	mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
+	if (ret)
+		goto out;
+
+	/* delay for exit from IDDQ mode */
+	usleep_range(100, 100);
+
+	/* deassert phy */
+	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
+	if (ret)
+		goto out;
+
+	/* delay for phy deasserted */
+	usleep_range(10000, 15000);
+
+	/* fake vbus valid signal */
+	val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
+	if (ret)
+		goto out;
+
+	/* delay for vbus valid */
+	usleep_range(100, 100);
+
+	ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
+			priv->eye_diagram_param);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+	return ret;
+}
+
+static int hi3660_phy_exit(struct phy *phy)
+{
+	struct hi3660_priv *priv = phy_get_drvdata(phy);
+	u32 val;
+	int ret;
+
+	/* assert phy */
+	val = IP_RST_USB3OTGPHY_POR;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+	if (ret)
+		goto out;
+
+	/* disable usb_tcxo_en */
+	val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
+	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+	return ret;
+}
+
+static struct phy_ops hi3660_phy_ops = {
+	.init		= hi3660_phy_init,
+	.exit		= hi3660_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int hi3660_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy *phy;
+	struct hi3660_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,pericrg-syscon");
+	if (IS_ERR(priv->peri_crg)) {
+		dev_err(dev, "no hisilicon,pericrg-syscon\n");
+		return PTR_ERR(priv->peri_crg);
+	}
+
+	priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,pctrl-syscon");
+	if (IS_ERR(priv->pctrl)) {
+		dev_err(dev, "no hisilicon,pctrl-syscon\n");
+		return PTR_ERR(priv->pctrl);
+	}
+
+	priv->otg_bc = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,usb3-otg-bc-syscon");
+	if (IS_ERR(priv->otg_bc)) {
+		dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+		return PTR_ERR(priv->otg_bc);
+	}
+
+	if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+		&(priv->eye_diagram_param)))
+		priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
+
+	phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3660_phy_of_match[] = {
+	{.compatible = "hisilicon,hi3660-usb-phy",},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
+
+static struct platform_driver hi3660_phy_driver = {
+	.probe	= hi3660_phy_probe,
+	.driver = {
+		.name	= "hi3660-usb-phy",
+		.of_match_table	= hi3660_phy_of_match,
+	}
+};
+module_platform_driver(hi3660_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");
-- 
2.15.0-rc2

Re: [PATCH v3 07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Andy Shevchenko]

On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>
> This driver handles usb phy power on and shutdown for hi3660 Soc of
> Hisilicon.

Few comments below. After fixing them, FWIW
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> +#define HI3660_USB_DEFAULT_PHY_PARAM           0x1c466e3

A bit of description would be nice to have what this value means.

> +       /* delay for exit from IDDQ mode */
> +       usleep_range(100, 100);

100,100 ? I think you need to give a room to scheduler, at least 20%
margin would be good to have.

> +       /* delay for vbus valid */
> +       usleep_range(100, 100);

Ditto.


-- 
With Best Regards,
Andy Shevchenko

[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Andy Shevchenko]

On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>
> This driver handles usb phy power on and shutdown for hi3660 Soc of
> Hisilicon.

Few comments below. After fixing them, FWIW
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> +#define HI3660_USB_DEFAULT_PHY_PARAM           0x1c466e3

A bit of description would be nice to have what this value means.

> +       /* delay for exit from IDDQ mode */
> +       usleep_range(100, 100);

100,100 ? I think you need to give a room to scheduler, at least 20%
margin would be good to have.

> +       /* delay for vbus valid */
> +       usleep_range(100, 100);

Ditto.

Re: [PATCH v3 07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Andy Shevchenko]

On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>
> This driver handles usb phy power on and shutdown for hi3660 Soc of
> Hisilicon.

Few comments below. After fixing them, FWIW
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> +#define HI3660_USB_DEFAULT_PHY_PARAM           0x1c466e3

A bit of description would be nice to have what this value means.

> +       /* delay for exit from IDDQ mode */
> +       usleep_range(100, 100);

100,100 ? I think you need to give a room to scheduler, at least 20%
margin would be good to have.

> +       /* delay for vbus valid */
> +       usleep_range(100, 100);

Ditto.


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Chen Yu]

Hi Andy,

On 2019/3/2 23:56, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> This driver handles usb phy power on and shutdown for hi3660 Soc of
>> Hisilicon.
> 
> Few comments below. After fixing them, FWIW
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> 
>> +#define HI3660_USB_DEFAULT_PHY_PARAM           0x1c466e3
> 
> A bit of description would be nice to have what this value means.
> 
OK.
>> +       /* delay for exit from IDDQ mode */
>> +       usleep_range(100, 100);
> 
> 100,100 ? I think you need to give a room to scheduler, at least 20%
> margin would be good to have.
> 
>> +       /* delay for vbus valid */
>> +       usleep_range(100, 100);
> 
> Ditto.
> 
> 
OK.

Thanks
Yu Chen

[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Yu Chen]

Hi Andy,

On 2019/3/2 23:56, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> This driver handles usb phy power on and shutdown for hi3660 Soc of
>> Hisilicon.
> 
> Few comments below. After fixing them, FWIW
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> 
>> +#define HI3660_USB_DEFAULT_PHY_PARAM           0x1c466e3
> 
> A bit of description would be nice to have what this value means.
> 
OK.
>> +       /* delay for exit from IDDQ mode */
>> +       usleep_range(100, 100);
> 
> 100,100 ? I think you need to give a room to scheduler, at least 20%
> margin would be good to have.
> 
>> +       /* delay for vbus valid */
>> +       usleep_range(100, 100);
> 
> Ditto.
> 
> 
OK.

Thanks
Yu Chen

Re: [PATCH v3 07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon

[Chen Yu]

Hi Andy,

On 2019/3/2 23:56, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:06 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> This driver handles usb phy power on and shutdown for hi3660 Soc of
>> Hisilicon.
> 
> Few comments below. After fixing them, FWIW
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> 
>> +#define HI3660_USB_DEFAULT_PHY_PARAM           0x1c466e3
> 
> A bit of description would be nice to have what this value means.
> 
OK.
>> +       /* delay for exit from IDDQ mode */
>> +       usleep_range(100, 100);
> 
> 100,100 ? I think you need to give a room to scheduler, at least 20%
> margin would be good to have.
> 
>> +       /* delay for vbus valid */
>> +       usleep_range(100, 100);
> 
> Ditto.
> 
> 
OK.

Thanks
Yu Chen

[PATCH v3 08/12] usb: roles: Add usb role switch notifier.

[Yu Chen]

This patch adds notifier for drivers want to be informed of the usb role switch.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/roles/class.c | 20 +++++++++++++++++++-
 include/linux/usb/role.h  | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index f45d8df5cfb8..e2caaa665d6e 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -20,6 +20,7 @@ struct usb_role_switch {
 	struct device dev;
 	struct mutex lock; /* device lock*/
 	enum usb_role role;
+	struct blocking_notifier_head nh;
 
 	/* From descriptor */
 	struct device *usb2_port;
@@ -49,8 +50,10 @@ int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role)
 	mutex_lock(&sw->lock);
 
 	ret = sw->set(sw->dev.parent, role);
-	if (!ret)
+	if (!ret) {
 		sw->role = role;
+		blocking_notifier_call_chain(&sw->nh, role, NULL);
+	}
 
 	mutex_unlock(&sw->lock);
 
@@ -58,6 +61,20 @@ int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role)
 }
 EXPORT_SYMBOL_GPL(usb_role_switch_set_role);
 
+int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&sw->nh, nb);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_register_notifier);
+
+int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&sw->nh, nb);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_unregister_notifier);
+
 /**
  * usb_role_switch_get_role - Get the USB role for a switch
  * @sw: USB role switch
@@ -271,6 +288,7 @@ usb_role_switch_register(struct device *parent,
 		return ERR_PTR(-ENOMEM);
 
 	mutex_init(&sw->lock);
+	BLOCKING_INIT_NOTIFIER_HEAD(&sw->nh);
 
 	sw->allow_userspace_control = desc->allow_userspace_control;
 	sw->usb2_port = desc->usb2_port;
diff --git a/include/linux/usb/role.h b/include/linux/usb/role.h
index 9684a8734757..9e1ca663387a 100644
--- a/include/linux/usb/role.h
+++ b/include/linux/usb/role.h
@@ -41,6 +41,8 @@ struct usb_role_switch_desc {
 	bool allow_userspace_control;
 };
 
+
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
 int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role);
 enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw);
 struct usb_role_switch *usb_role_switch_get(struct device *dev);
@@ -50,5 +52,49 @@ struct usb_role_switch *
 usb_role_switch_register(struct device *parent,
 			 const struct usb_role_switch_desc *desc);
 void usb_role_switch_unregister(struct usb_role_switch *sw);
+int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb);
+int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb);
+#else
+static inline int usb_role_switch_set_role(struct usb_role_switch *sw,
+		enum usb_role role)
+{
+	return 0;
+}
+
+static inline enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw)
+{
+	return USB_ROLE_NONE;
+}
+
+static inline struct usb_role_switch *usb_role_switch_get(struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void usb_role_switch_put(struct usb_role_switch *sw) { }
+
+static inline struct usb_role_switch *
+usb_role_switch_register(struct device *parent,
+			 const struct usb_role_switch_desc *desc)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void usb_role_switch_unregister(struct usb_role_switch *sw) { }
+
+static int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb)
+{
+	return -ENODEV;
+}
+
+static int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb)
+{
+	return -ENODEV;
+}
+#endif
 
 #endif /* __LINUX_USB_ROLE_H */
-- 
2.15.0-rc2

[v3,08/12] usb: roles: Add usb role switch notifier.

[Yu Chen]

This patch adds notifier for drivers want to be informed of the usb role switch.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/roles/class.c | 20 +++++++++++++++++++-
 include/linux/usb/role.h  | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index f45d8df5cfb8..e2caaa665d6e 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -20,6 +20,7 @@ struct usb_role_switch {
 	struct device dev;
 	struct mutex lock; /* device lock*/
 	enum usb_role role;
+	struct blocking_notifier_head nh;
 
 	/* From descriptor */
 	struct device *usb2_port;
@@ -49,8 +50,10 @@ int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role)
 	mutex_lock(&sw->lock);
 
 	ret = sw->set(sw->dev.parent, role);
-	if (!ret)
+	if (!ret) {
 		sw->role = role;
+		blocking_notifier_call_chain(&sw->nh, role, NULL);
+	}
 
 	mutex_unlock(&sw->lock);
 
@@ -58,6 +61,20 @@ int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role)
 }
 EXPORT_SYMBOL_GPL(usb_role_switch_set_role);
 
+int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&sw->nh, nb);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_register_notifier);
+
+int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&sw->nh, nb);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_unregister_notifier);
+
 /**
  * usb_role_switch_get_role - Get the USB role for a switch
  * @sw: USB role switch
@@ -271,6 +288,7 @@ usb_role_switch_register(struct device *parent,
 		return ERR_PTR(-ENOMEM);
 
 	mutex_init(&sw->lock);
+	BLOCKING_INIT_NOTIFIER_HEAD(&sw->nh);
 
 	sw->allow_userspace_control = desc->allow_userspace_control;
 	sw->usb2_port = desc->usb2_port;
diff --git a/include/linux/usb/role.h b/include/linux/usb/role.h
index 9684a8734757..9e1ca663387a 100644
--- a/include/linux/usb/role.h
+++ b/include/linux/usb/role.h
@@ -41,6 +41,8 @@ struct usb_role_switch_desc {
 	bool allow_userspace_control;
 };
 
+
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
 int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role);
 enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw);
 struct usb_role_switch *usb_role_switch_get(struct device *dev);
@@ -50,5 +52,49 @@ struct usb_role_switch *
 usb_role_switch_register(struct device *parent,
 			 const struct usb_role_switch_desc *desc);
 void usb_role_switch_unregister(struct usb_role_switch *sw);
+int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb);
+int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb);
+#else
+static inline int usb_role_switch_set_role(struct usb_role_switch *sw,
+		enum usb_role role)
+{
+	return 0;
+}
+
+static inline enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw)
+{
+	return USB_ROLE_NONE;
+}
+
+static inline struct usb_role_switch *usb_role_switch_get(struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void usb_role_switch_put(struct usb_role_switch *sw) { }
+
+static inline struct usb_role_switch *
+usb_role_switch_register(struct device *parent,
+			 const struct usb_role_switch_desc *desc)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void usb_role_switch_unregister(struct usb_role_switch *sw) { }
+
+static int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb)
+{
+	return -ENODEV;
+}
+
+static int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb)
+{
+	return -ENODEV;
+}
+#endif
 
 #endif /* __LINUX_USB_ROLE_H */

[PATCH v3 08/12] usb: roles: Add usb role switch notifier.

[Yu Chen]

This patch adds notifier for drivers want to be informed of the usb role switch.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/roles/class.c | 20 +++++++++++++++++++-
 include/linux/usb/role.h  | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index f45d8df5cfb8..e2caaa665d6e 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -20,6 +20,7 @@ struct usb_role_switch {
 	struct device dev;
 	struct mutex lock; /* device lock*/
 	enum usb_role role;
+	struct blocking_notifier_head nh;
 
 	/* From descriptor */
 	struct device *usb2_port;
@@ -49,8 +50,10 @@ int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role)
 	mutex_lock(&sw->lock);
 
 	ret = sw->set(sw->dev.parent, role);
-	if (!ret)
+	if (!ret) {
 		sw->role = role;
+		blocking_notifier_call_chain(&sw->nh, role, NULL);
+	}
 
 	mutex_unlock(&sw->lock);
 
@@ -58,6 +61,20 @@ int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role)
 }
 EXPORT_SYMBOL_GPL(usb_role_switch_set_role);
 
+int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&sw->nh, nb);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_register_notifier);
+
+int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&sw->nh, nb);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_unregister_notifier);
+
 /**
  * usb_role_switch_get_role - Get the USB role for a switch
  * @sw: USB role switch
@@ -271,6 +288,7 @@ usb_role_switch_register(struct device *parent,
 		return ERR_PTR(-ENOMEM);
 
 	mutex_init(&sw->lock);
+	BLOCKING_INIT_NOTIFIER_HEAD(&sw->nh);
 
 	sw->allow_userspace_control = desc->allow_userspace_control;
 	sw->usb2_port = desc->usb2_port;
diff --git a/include/linux/usb/role.h b/include/linux/usb/role.h
index 9684a8734757..9e1ca663387a 100644
--- a/include/linux/usb/role.h
+++ b/include/linux/usb/role.h
@@ -41,6 +41,8 @@ struct usb_role_switch_desc {
 	bool allow_userspace_control;
 };
 
+
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
 int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role);
 enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw);
 struct usb_role_switch *usb_role_switch_get(struct device *dev);
@@ -50,5 +52,49 @@ struct usb_role_switch *
 usb_role_switch_register(struct device *parent,
 			 const struct usb_role_switch_desc *desc);
 void usb_role_switch_unregister(struct usb_role_switch *sw);
+int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb);
+int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb);
+#else
+static inline int usb_role_switch_set_role(struct usb_role_switch *sw,
+		enum usb_role role)
+{
+	return 0;
+}
+
+static inline enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw)
+{
+	return USB_ROLE_NONE;
+}
+
+static inline struct usb_role_switch *usb_role_switch_get(struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void usb_role_switch_put(struct usb_role_switch *sw) { }
+
+static inline struct usb_role_switch *
+usb_role_switch_register(struct device *parent,
+			 const struct usb_role_switch_desc *desc)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void usb_role_switch_unregister(struct usb_role_switch *sw) { }
+
+static int usb_role_switch_register_notifier(struct usb_role_switch *sw,
+				      struct notifier_block *nb)
+{
+	return -ENODEV;
+}
+
+static int usb_role_switch_unregister_notifier(struct usb_role_switch *sw,
+					struct notifier_block *nb)
+{
+	return -ENODEV;
+}
+#endif
 
 #endif /* __LINUX_USB_ROLE_H */
-- 
2.15.0-rc2

[PATCH v3 09/12] usb: dwc3: Registering a role switch in the DRD code.

[Yu Chen]

The Type-C drivers use USB role switch API to inform the
system about the negotiated data role, so registering a role
switch in the DRD code in order to support platforms with
USB Type-C connectors.

Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Assign fwnode in dwc3_role_switch.
v3:
* Add default mode property for usb role switch.
* Add select USB_ROLE_SWITCH for USB_DWC3_DUAL_ROLE in Kconfig.
* Do usb_role_switch_register only if property "usb-role-switch" present.
---
---
 drivers/usb/dwc3/Kconfig |  1 +
 drivers/usb/dwc3/core.h  |  3 +++
 drivers/usb/dwc3/drd.c   | 58 +++++++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 1a0404fda596..3a0cb9f1f38a 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -42,6 +42,7 @@ config USB_DWC3_DUAL_ROLE
 	bool "Dual Role mode"
 	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
 	depends on (EXTCON=y || EXTCON=USB_DWC3)
+	select USB_ROLE_SWITCH
 	help
 	  This is the default mode of working of DWC3 controller where
 	  both host and gadget features are enabled.
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 402b3c29eb26..b2b0da007bff 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -25,6 +25,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/role.h>
 #include <linux/ulpi/interface.h>
 
 #include <linux/phy/phy.h>
@@ -1083,6 +1084,8 @@ struct dwc3 {
 	struct extcon_dev	*edev;
 	struct notifier_block	edev_nb;
 	enum usb_phy_interface	hsphy_mode;
+	struct usb_role_switch	*role_sw;
+	enum usb_dr_mode	role_switch_default_mode;
 
 	u32			fladj;
 	u32			irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 869725d15c74..5bfea03233d7 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -474,6 +474,43 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	return edev;
 }
 
+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 mode;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		mode = DWC3_GCTL_PRTCAP_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			mode = DWC3_GCTL_PRTCAP_HOST;
+		else
+			mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	}
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	unsigned long flags;
+	enum usb_role role;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	role = dwc->current_otg_role;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return role;
+}
+
 int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
@@ -482,7 +519,23 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (dwc->edev) {
+	if (device_property_read_bool(dwc->dev, "usb-role-switch")) {
+		struct usb_role_switch_desc dwc3_role_switch = {0};
+
+		if (device_property_read_bool(dwc->dev,
+				"role-switch-default-host"))
+			dwc->role_switch_default_mode = USB_DR_MODE_HOST;
+		else
+			dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+
+		dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+		dwc3_role_switch.set = dwc3_usb_role_switch_set;
+		dwc3_role_switch.get = dwc3_usb_role_switch_get;
+		dwc->role_sw = usb_role_switch_register(dwc->dev,
+							&dwc3_role_switch);
+		if (IS_ERR(dwc->role_sw))
+			return PTR_ERR(dwc->role_sw);
+	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);
@@ -529,6 +582,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
 {
 	unsigned long flags;
 
+	if (dwc->role_sw)
+		usb_role_switch_unregister(dwc->role_sw);
+
 	if (dwc->edev)
 		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
 					   &dwc->edev_nb);
-- 
2.15.0-rc2

[v3,09/12] usb: dwc3: Registering a role switch in the DRD code.

[Yu Chen]

The Type-C drivers use USB role switch API to inform the
system about the negotiated data role, so registering a role
switch in the DRD code in order to support platforms with
USB Type-C connectors.

Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Assign fwnode in dwc3_role_switch.
v3:
* Add default mode property for usb role switch.
* Add select USB_ROLE_SWITCH for USB_DWC3_DUAL_ROLE in Kconfig.
* Do usb_role_switch_register only if property "usb-role-switch" present.
---
---
 drivers/usb/dwc3/Kconfig |  1 +
 drivers/usb/dwc3/core.h  |  3 +++
 drivers/usb/dwc3/drd.c   | 58 +++++++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 1a0404fda596..3a0cb9f1f38a 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -42,6 +42,7 @@ config USB_DWC3_DUAL_ROLE
 	bool "Dual Role mode"
 	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
 	depends on (EXTCON=y || EXTCON=USB_DWC3)
+	select USB_ROLE_SWITCH
 	help
 	  This is the default mode of working of DWC3 controller where
 	  both host and gadget features are enabled.
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 402b3c29eb26..b2b0da007bff 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -25,6 +25,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/role.h>
 #include <linux/ulpi/interface.h>
 
 #include <linux/phy/phy.h>
@@ -1083,6 +1084,8 @@ struct dwc3 {
 	struct extcon_dev	*edev;
 	struct notifier_block	edev_nb;
 	enum usb_phy_interface	hsphy_mode;
+	struct usb_role_switch	*role_sw;
+	enum usb_dr_mode	role_switch_default_mode;
 
 	u32			fladj;
 	u32			irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 869725d15c74..5bfea03233d7 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -474,6 +474,43 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	return edev;
 }
 
+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 mode;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		mode = DWC3_GCTL_PRTCAP_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			mode = DWC3_GCTL_PRTCAP_HOST;
+		else
+			mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	}
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	unsigned long flags;
+	enum usb_role role;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	role = dwc->current_otg_role;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return role;
+}
+
 int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
@@ -482,7 +519,23 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (dwc->edev) {
+	if (device_property_read_bool(dwc->dev, "usb-role-switch")) {
+		struct usb_role_switch_desc dwc3_role_switch = {0};
+
+		if (device_property_read_bool(dwc->dev,
+				"role-switch-default-host"))
+			dwc->role_switch_default_mode = USB_DR_MODE_HOST;
+		else
+			dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+
+		dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+		dwc3_role_switch.set = dwc3_usb_role_switch_set;
+		dwc3_role_switch.get = dwc3_usb_role_switch_get;
+		dwc->role_sw = usb_role_switch_register(dwc->dev,
+							&dwc3_role_switch);
+		if (IS_ERR(dwc->role_sw))
+			return PTR_ERR(dwc->role_sw);
+	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);
@@ -529,6 +582,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
 {
 	unsigned long flags;
 
+	if (dwc->role_sw)
+		usb_role_switch_unregister(dwc->role_sw);
+
 	if (dwc->edev)
 		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
 					   &dwc->edev_nb);

[PATCH v3 09/12] usb: dwc3: Registering a role switch in the DRD code.

[Yu Chen]

The Type-C drivers use USB role switch API to inform the
system about the negotiated data role, so registering a role
switch in the DRD code in order to support platforms with
USB Type-C connectors.

Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Assign fwnode in dwc3_role_switch.
v3:
* Add default mode property for usb role switch.
* Add select USB_ROLE_SWITCH for USB_DWC3_DUAL_ROLE in Kconfig.
* Do usb_role_switch_register only if property "usb-role-switch" present.
---
---
 drivers/usb/dwc3/Kconfig |  1 +
 drivers/usb/dwc3/core.h  |  3 +++
 drivers/usb/dwc3/drd.c   | 58 +++++++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 1a0404fda596..3a0cb9f1f38a 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -42,6 +42,7 @@ config USB_DWC3_DUAL_ROLE
 	bool "Dual Role mode"
 	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
 	depends on (EXTCON=y || EXTCON=USB_DWC3)
+	select USB_ROLE_SWITCH
 	help
 	  This is the default mode of working of DWC3 controller where
 	  both host and gadget features are enabled.
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 402b3c29eb26..b2b0da007bff 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -25,6 +25,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/role.h>
 #include <linux/ulpi/interface.h>
 
 #include <linux/phy/phy.h>
@@ -1083,6 +1084,8 @@ struct dwc3 {
 	struct extcon_dev	*edev;
 	struct notifier_block	edev_nb;
 	enum usb_phy_interface	hsphy_mode;
+	struct usb_role_switch	*role_sw;
+	enum usb_dr_mode	role_switch_default_mode;
 
 	u32			fladj;
 	u32			irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 869725d15c74..5bfea03233d7 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -474,6 +474,43 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	return edev;
 }
 
+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 mode;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		mode = DWC3_GCTL_PRTCAP_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			mode = DWC3_GCTL_PRTCAP_HOST;
+		else
+			mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	}
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	unsigned long flags;
+	enum usb_role role;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	role = dwc->current_otg_role;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return role;
+}
+
 int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
@@ -482,7 +519,23 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (dwc->edev) {
+	if (device_property_read_bool(dwc->dev, "usb-role-switch")) {
+		struct usb_role_switch_desc dwc3_role_switch = {0};
+
+		if (device_property_read_bool(dwc->dev,
+				"role-switch-default-host"))
+			dwc->role_switch_default_mode = USB_DR_MODE_HOST;
+		else
+			dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+
+		dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+		dwc3_role_switch.set = dwc3_usb_role_switch_set;
+		dwc3_role_switch.get = dwc3_usb_role_switch_get;
+		dwc->role_sw = usb_role_switch_register(dwc->dev,
+							&dwc3_role_switch);
+		if (IS_ERR(dwc->role_sw))
+			return PTR_ERR(dwc->role_sw);
+	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);
@@ -529,6 +582,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
 {
 	unsigned long flags;
 
+	if (dwc->role_sw)
+		usb_role_switch_unregister(dwc->role_sw);
+
 	if (dwc->edev)
 		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
 					   &dwc->edev_nb);
-- 
2.15.0-rc2

Re: [PATCH v3 09/12] usb: dwc3: Registering a role switch in the DRD code.

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 23429 bytes --]

Hi Yu,

I love your patch! Perhaps something to improve:

[auto build test WARNING on balbi-usb/next]
[also build test WARNING on v5.0 next-20190305]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
reproduce: make htmldocs

All warnings (new ones prefixed by >>):

   WARNING: convert(1) not found, for SVG to PDF conversion install ImageMagick (https://www.imagemagick.org)
   include/linux/rcupdate_wait.h:1: warning: no structured comments found
   include/linux/rcutree.h:1: warning: no structured comments found
   kernel/rcu/tree.c:710: warning: Excess function parameter 'irq' description in 'rcu_nmi_exit'
   include/linux/gfp.h:1: warning: no structured comments found
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ibss' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.connect' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.keys' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ie' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ie_len' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.bssid' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ssid' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.default_key' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.default_mgmt_key' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.prev_bssid_valid' not described in 'wireless_dev'
   include/net/mac80211.h:2393: warning: Function parameter or member 'radiotap_timestamp.units_pos' not described in 'ieee80211_hw'
   include/net/mac80211.h:2393: warning: Function parameter or member 'radiotap_timestamp.accuracy' not described in 'ieee80211_hw'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.rts_cts_rate_idx' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.use_rts' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.use_cts_prot' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.short_preamble' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.skip_table' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.jiffies' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.vif' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.hw_key' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.flags' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.enqueue_time' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'ack' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'ack.cookie' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ack_signal' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ampdu_ack_len' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ampdu_len' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.antenna' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.tx_time' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.is_valid_ack_signal' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.status_driver_data' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'driver_rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'pad' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'rate_driver_data' not described in 'ieee80211_tx_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg.signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg.chain_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.filtered' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.retry_failed' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.retry_count' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.lost_packets' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_tdls_pkt_time' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.msdu_retries' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.msdu_failed' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_ack' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_ack_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.ack_signal_filled' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.avg_ack_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.packets' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.bytes' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.last_rate' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.msdu' not described in 'sta_info'
   kernel/rcu/tree.c:711: warning: Excess function parameter 'irq' description in 'rcu_nmi_exit'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.cb' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.poll' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.active' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.cb' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.poll' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.active' not described in 'dma_buf'
   include/linux/dma-fence-array.h:54: warning: Function parameter or member 'work' not described in 'dma_fence_array'
   include/linux/firmware/intel/stratix10-svc-client.h:1: warning: no structured comments found
   include/linux/gpio/driver.h:371: warning: Function parameter or member 'init_valid_mask' not described in 'gpio_chip'
   include/linux/iio/hw-consumer.h:1: warning: no structured comments found
   include/linux/input/sparse-keymap.h:46: warning: Function parameter or member 'sw' not described in 'key_entry'
   drivers/mtd/nand/raw/nand_base.c:420: warning: Function parameter or member 'chip' not described in 'nand_fill_oob'
   drivers/mtd/nand/raw/nand_bbt.c:173: warning: Function parameter or member 'this' not described in 'read_bbt'
   drivers/mtd/nand/raw/nand_bbt.c:173: warning: Excess function parameter 'chip' description in 'read_bbt'
   include/linux/regulator/machine.h:199: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints'
   include/linux/regulator/driver.h:228: warning: Function parameter or member 'resume' not described in 'regulator_ops'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw0' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw1' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw2' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw3' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.eadm' not described in 'irb'
   drivers/slimbus/stream.c:1: warning: no structured comments found
   include/linux/spi/spi.h:180: warning: Function parameter or member 'driver_override' not described in 'spi_device'
   drivers/target/target_core_device.c:1: warning: no structured comments found
>> drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'role_sw' not described in 'dwc3'
>> drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'role_switch_default_mode' not described in 'dwc3'
   drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'dis_split_quirk' not described in 'dwc3'
   drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'gctl_reset_quirk' not described in 'dwc3'
   drivers/usb/typec/bus.c:1: warning: no structured comments found
   drivers/usb/typec/class.c:1: warning: no structured comments found
   include/linux/w1.h:281: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
   fs/direct-io.c:257: warning: Excess function parameter 'offset' description in 'dio_complete'
   fs/file_table.c:1: warning: no structured comments found
   fs/libfs.c:477: warning: Excess function parameter 'available' description in 'simple_write_end'
   fs/posix_acl.c:646: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:646: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:646: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:183: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Function parameter or member 'range' not described in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Function parameter or member 'range' not described in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:382: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:383: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'start' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'end' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'entry' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:845: warning: Function parameter or member 'level' not described in 'amdgpu_vm_bo_param'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'level' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3093: warning: Function parameter or member 'pasid' not described in 'amdgpu_vm_make_compute'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:128: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source @atomic_obj
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'atomic_obj' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'atomic_obj_lock' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'backlight_link' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'backlight_caps' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'freesync_module' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'fw_dmcu' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'dmcu_fw_version' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: no structured comments found
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_pin' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_unpin' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_res_obj' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_get_sg_table' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_import_sg_table' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_vmap' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_vunmap' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_mmap' not described in 'drm_driver'
   include/drm/drm_atomic_state_helper.h:1: warning: no structured comments found
   drivers/gpu/drm/drm_dp_helper.c:1364: warning: Function parameter or member 'dsc_dpcd' not described in 'drm_dp_dsc_sink_max_slice_count'
   drivers/gpu/drm/drm_dp_helper.c:1364: warning: Function parameter or member 'is_edp' not described in 'drm_dp_dsc_sink_max_slice_count'
   drivers/gpu/drm/i915/i915_vma.h:49: warning: cannot understand function prototype: 'struct i915_vma '
   drivers/gpu/drm/i915/i915_vma.h:1: warning: no structured comments found
   drivers/gpu/drm/i915/intel_guc_fwif.h:536: warning: cannot understand function prototype: 'struct guc_log_buffer_state '
   drivers/gpu/drm/i915/i915_trace.h:1: warning: no structured comments found
   include/linux/skbuff.h:876: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'list' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
   include/net/sock.h:238: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'

vim +1231 drivers/usb/dwc3/core.h

72246da4 Felipe Balbi 2011-08-19 @1231  

:::::: The code at line 1231 was first introduced by commit
:::::: 72246da40f3719af3bfd104a2365b32537c27d83 usb: Introduce DesignWare USB3 DRD Driver

:::::: TO: Felipe Balbi <balbi@ti.com>
:::::: CC: Greg Kroah-Hartman <gregkh@suse.de>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 6587 bytes --]

[v3,09/12] usb: dwc3: Registering a role switch in the DRD code.

[kbuild test robot]

Hi Yu,

I love your patch! Perhaps something to improve:

[auto build test WARNING on balbi-usb/next]
[also build test WARNING on v5.0 next-20190305]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
reproduce: make htmldocs

All warnings (new ones prefixed by >>):

   WARNING: convert(1) not found, for SVG to PDF conversion install ImageMagick (https://www.imagemagick.org)
   include/linux/rcupdate_wait.h:1: warning: no structured comments found
   include/linux/rcutree.h:1: warning: no structured comments found
   kernel/rcu/tree.c:710: warning: Excess function parameter 'irq' description in 'rcu_nmi_exit'
   include/linux/gfp.h:1: warning: no structured comments found
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ibss' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.connect' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.keys' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ie' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ie_len' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.bssid' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ssid' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.default_key' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.default_mgmt_key' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.prev_bssid_valid' not described in 'wireless_dev'
   include/net/mac80211.h:2393: warning: Function parameter or member 'radiotap_timestamp.units_pos' not described in 'ieee80211_hw'
   include/net/mac80211.h:2393: warning: Function parameter or member 'radiotap_timestamp.accuracy' not described in 'ieee80211_hw'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.rts_cts_rate_idx' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.use_rts' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.use_cts_prot' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.short_preamble' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.skip_table' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.jiffies' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.vif' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.hw_key' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.flags' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.enqueue_time' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'ack' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'ack.cookie' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ack_signal' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ampdu_ack_len' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ampdu_len' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.antenna' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.tx_time' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.is_valid_ack_signal' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.status_driver_data' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'driver_rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'pad' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'rate_driver_data' not described in 'ieee80211_tx_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg.signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg.chain_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.filtered' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.retry_failed' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.retry_count' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.lost_packets' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_tdls_pkt_time' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.msdu_retries' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.msdu_failed' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_ack' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_ack_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.ack_signal_filled' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.avg_ack_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.packets' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.bytes' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.last_rate' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.msdu' not described in 'sta_info'
   kernel/rcu/tree.c:711: warning: Excess function parameter 'irq' description in 'rcu_nmi_exit'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.cb' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.poll' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.active' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.cb' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.poll' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.active' not described in 'dma_buf'
   include/linux/dma-fence-array.h:54: warning: Function parameter or member 'work' not described in 'dma_fence_array'
   include/linux/firmware/intel/stratix10-svc-client.h:1: warning: no structured comments found
   include/linux/gpio/driver.h:371: warning: Function parameter or member 'init_valid_mask' not described in 'gpio_chip'
   include/linux/iio/hw-consumer.h:1: warning: no structured comments found
   include/linux/input/sparse-keymap.h:46: warning: Function parameter or member 'sw' not described in 'key_entry'
   drivers/mtd/nand/raw/nand_base.c:420: warning: Function parameter or member 'chip' not described in 'nand_fill_oob'
   drivers/mtd/nand/raw/nand_bbt.c:173: warning: Function parameter or member 'this' not described in 'read_bbt'
   drivers/mtd/nand/raw/nand_bbt.c:173: warning: Excess function parameter 'chip' description in 'read_bbt'
   include/linux/regulator/machine.h:199: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints'
   include/linux/regulator/driver.h:228: warning: Function parameter or member 'resume' not described in 'regulator_ops'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw0' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw1' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw2' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw3' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.eadm' not described in 'irb'
   drivers/slimbus/stream.c:1: warning: no structured comments found
   include/linux/spi/spi.h:180: warning: Function parameter or member 'driver_override' not described in 'spi_device'
   drivers/target/target_core_device.c:1: warning: no structured comments found
>> drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'role_sw' not described in 'dwc3'
>> drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'role_switch_default_mode' not described in 'dwc3'
   drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'dis_split_quirk' not described in 'dwc3'
   drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'gctl_reset_quirk' not described in 'dwc3'
   drivers/usb/typec/bus.c:1: warning: no structured comments found
   drivers/usb/typec/class.c:1: warning: no structured comments found
   include/linux/w1.h:281: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
   fs/direct-io.c:257: warning: Excess function parameter 'offset' description in 'dio_complete'
   fs/file_table.c:1: warning: no structured comments found
   fs/libfs.c:477: warning: Excess function parameter 'available' description in 'simple_write_end'
   fs/posix_acl.c:646: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:646: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:646: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:183: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Function parameter or member 'range' not described in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Function parameter or member 'range' not described in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:382: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:383: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'start' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'end' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'entry' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:845: warning: Function parameter or member 'level' not described in 'amdgpu_vm_bo_param'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'level' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3093: warning: Function parameter or member 'pasid' not described in 'amdgpu_vm_make_compute'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:128: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source @atomic_obj
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'atomic_obj' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'atomic_obj_lock' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'backlight_link' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'backlight_caps' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'freesync_module' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'fw_dmcu' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'dmcu_fw_version' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: no structured comments found
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_pin' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_unpin' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_res_obj' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_get_sg_table' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_import_sg_table' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_vmap' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_vunmap' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_mmap' not described in 'drm_driver'
   include/drm/drm_atomic_state_helper.h:1: warning: no structured comments found
   drivers/gpu/drm/drm_dp_helper.c:1364: warning: Function parameter or member 'dsc_dpcd' not described in 'drm_dp_dsc_sink_max_slice_count'
   drivers/gpu/drm/drm_dp_helper.c:1364: warning: Function parameter or member 'is_edp' not described in 'drm_dp_dsc_sink_max_slice_count'
   drivers/gpu/drm/i915/i915_vma.h:49: warning: cannot understand function prototype: 'struct i915_vma '
   drivers/gpu/drm/i915/i915_vma.h:1: warning: no structured comments found
   drivers/gpu/drm/i915/intel_guc_fwif.h:536: warning: cannot understand function prototype: 'struct guc_log_buffer_state '
   drivers/gpu/drm/i915/i915_trace.h:1: warning: no structured comments found
   include/linux/skbuff.h:876: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'list' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
   include/net/sock.h:238: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'

vim +1231 drivers/usb/dwc3/core.h

72246da4 Felipe Balbi 2011-08-19 @1231  

:::::: The code at line 1231 was first introduced by commit
:::::: 72246da40f3719af3bfd104a2365b32537c27d83 usb: Introduce DesignWare USB3 DRD Driver

:::::: TO: Felipe Balbi <balbi@ti.com>
:::::: CC: Greg Kroah-Hartman <gregkh@suse.de>
---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Re: [PATCH v3 09/12] usb: dwc3: Registering a role switch in the DRD code.

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 23429 bytes --]

Hi Yu,

I love your patch! Perhaps something to improve:

[auto build test WARNING on balbi-usb/next]
[also build test WARNING on v5.0 next-20190305]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yu-Chen/Add-support-for-usb-on-Hikey960/20190305-062824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
reproduce: make htmldocs

All warnings (new ones prefixed by >>):

   WARNING: convert(1) not found, for SVG to PDF conversion install ImageMagick (https://www.imagemagick.org)
   include/linux/rcupdate_wait.h:1: warning: no structured comments found
   include/linux/rcutree.h:1: warning: no structured comments found
   kernel/rcu/tree.c:710: warning: Excess function parameter 'irq' description in 'rcu_nmi_exit'
   include/linux/gfp.h:1: warning: no structured comments found
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ibss' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.connect' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.keys' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ie' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ie_len' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.bssid' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.ssid' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.default_key' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.default_mgmt_key' not described in 'wireless_dev'
   include/net/cfg80211.h:4687: warning: Function parameter or member 'wext.prev_bssid_valid' not described in 'wireless_dev'
   include/net/mac80211.h:2393: warning: Function parameter or member 'radiotap_timestamp.units_pos' not described in 'ieee80211_hw'
   include/net/mac80211.h:2393: warning: Function parameter or member 'radiotap_timestamp.accuracy' not described in 'ieee80211_hw'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.rts_cts_rate_idx' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.use_rts' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.use_cts_prot' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.short_preamble' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.skip_table' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.jiffies' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.vif' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.hw_key' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.flags' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'control.enqueue_time' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'ack' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'ack.cookie' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ack_signal' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ampdu_ack_len' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.ampdu_len' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.antenna' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.tx_time' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.is_valid_ack_signal' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'status.status_driver_data' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'driver_rates' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'pad' not described in 'ieee80211_tx_info'
   include/net/mac80211.h:1004: warning: Function parameter or member 'rate_driver_data' not described in 'ieee80211_tx_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg.signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'rx_stats_avg.chain_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.filtered' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.retry_failed' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.retry_count' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.lost_packets' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_tdls_pkt_time' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.msdu_retries' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.msdu_failed' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_ack' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.last_ack_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.ack_signal_filled' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'status_stats.avg_ack_signal' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.packets' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.bytes' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.last_rate' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.msdu' not described in 'sta_info'
   kernel/rcu/tree.c:711: warning: Excess function parameter 'irq' description in 'rcu_nmi_exit'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.cb' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.poll' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.active' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.cb' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.poll' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.active' not described in 'dma_buf'
   include/linux/dma-fence-array.h:54: warning: Function parameter or member 'work' not described in 'dma_fence_array'
   include/linux/firmware/intel/stratix10-svc-client.h:1: warning: no structured comments found
   include/linux/gpio/driver.h:371: warning: Function parameter or member 'init_valid_mask' not described in 'gpio_chip'
   include/linux/iio/hw-consumer.h:1: warning: no structured comments found
   include/linux/input/sparse-keymap.h:46: warning: Function parameter or member 'sw' not described in 'key_entry'
   drivers/mtd/nand/raw/nand_base.c:420: warning: Function parameter or member 'chip' not described in 'nand_fill_oob'
   drivers/mtd/nand/raw/nand_bbt.c:173: warning: Function parameter or member 'this' not described in 'read_bbt'
   drivers/mtd/nand/raw/nand_bbt.c:173: warning: Excess function parameter 'chip' description in 'read_bbt'
   include/linux/regulator/machine.h:199: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints'
   include/linux/regulator/driver.h:228: warning: Function parameter or member 'resume' not described in 'regulator_ops'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw0' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw1' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw2' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw3' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.eadm' not described in 'irb'
   drivers/slimbus/stream.c:1: warning: no structured comments found
   include/linux/spi/spi.h:180: warning: Function parameter or member 'driver_override' not described in 'spi_device'
   drivers/target/target_core_device.c:1: warning: no structured comments found
>> drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'role_sw' not described in 'dwc3'
>> drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'role_switch_default_mode' not described in 'dwc3'
   drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'dis_split_quirk' not described in 'dwc3'
   drivers/usb/dwc3/core.h:1231: warning: Function parameter or member 'gctl_reset_quirk' not described in 'dwc3'
   drivers/usb/typec/bus.c:1: warning: no structured comments found
   drivers/usb/typec/class.c:1: warning: no structured comments found
   include/linux/w1.h:281: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
   fs/direct-io.c:257: warning: Excess function parameter 'offset' description in 'dio_complete'
   fs/file_table.c:1: warning: no structured comments found
   fs/libfs.c:477: warning: Excess function parameter 'available' description in 'simple_write_end'
   fs/posix_acl.c:646: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:646: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:646: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:183: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Function parameter or member 'range' not described in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Function parameter or member 'range' not described in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:382: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:383: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'start' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'end' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:555: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:603: warning: Function parameter or member 'entry' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:845: warning: Function parameter or member 'level' not described in 'amdgpu_vm_bo_param'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1350: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'level' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1517: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_huge'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3093: warning: Function parameter or member 'pasid' not described in 'amdgpu_vm_make_compute'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:128: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source @atomic_obj
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'atomic_obj' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'atomic_obj_lock' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'backlight_link' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'backlight_caps' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'freesync_module' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'fw_dmcu' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'dmcu_fw_version' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: no structured comments found
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_pin' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_unpin' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_res_obj' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_get_sg_table' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_import_sg_table' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_vmap' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_vunmap' not described in 'drm_driver'
   include/drm/drm_drv.h:618: warning: Function parameter or member 'gem_prime_mmap' not described in 'drm_driver'
   include/drm/drm_atomic_state_helper.h:1: warning: no structured comments found
   drivers/gpu/drm/drm_dp_helper.c:1364: warning: Function parameter or member 'dsc_dpcd' not described in 'drm_dp_dsc_sink_max_slice_count'
   drivers/gpu/drm/drm_dp_helper.c:1364: warning: Function parameter or member 'is_edp' not described in 'drm_dp_dsc_sink_max_slice_count'
   drivers/gpu/drm/i915/i915_vma.h:49: warning: cannot understand function prototype: 'struct i915_vma '
   drivers/gpu/drm/i915/i915_vma.h:1: warning: no structured comments found
   drivers/gpu/drm/i915/intel_guc_fwif.h:536: warning: cannot understand function prototype: 'struct guc_log_buffer_state '
   drivers/gpu/drm/i915/i915_trace.h:1: warning: no structured comments found
   include/linux/skbuff.h:876: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'list' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
   include/net/sock.h:238: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'

vim +1231 drivers/usb/dwc3/core.h

72246da4 Felipe Balbi 2011-08-19 @1231  

:::::: The code at line 1231 was first introduced by commit
:::::: 72246da40f3719af3bfd104a2365b32537c27d83 usb: Introduce DesignWare USB3 DRD Driver

:::::: TO: Felipe Balbi <balbi@ti.com>
:::::: CC: Greg Kroah-Hartman <gregkh@suse.de>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 6587 bytes --]

[PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Yu Chen]

This driver handles usb hub power on and typeC port event of HiKey960 board:
1)DP&DM switching between usb hub and typeC port base on typeC port
state
2)Control power of usb hub on Hikey960
3)Control vbus of typeC port

Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Using gpiod API with the gpios.
* Removing registering usb role switch.
* Registering usb role switch notifier.
v2:
* Fix license declaration.
* Add configuration of  gpio direction.
* Remove some log print.
v3:
* Remove property of "typec_vbus_enable_val".
* Remove gpiod_direction_output and set initial value of gpio by devm_gpiod_get.
---
---
 drivers/misc/Kconfig          |   6 ++
 drivers/misc/Makefile         |   1 +
 drivers/misc/hisi_hikey_usb.c | 167 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 174 insertions(+)
 create mode 100644 drivers/misc/hisi_hikey_usb.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f417b06e11c5..8d8b717759e2 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -521,6 +521,12 @@ config PVPANIC
 	  a paravirtualized device provided by QEMU; it lets a virtual machine
 	  (guest) communicate panic events to the host.
 
+config HISI_HIKEY_USB
+	tristate "USB functionality of HiSilicon Hikey Platform"
+	depends on OF && GPIOLIB
+	help
+	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e39ccbbc1b3a..dc8892b13a1a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -59,3 +59,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 obj-$(CONFIG_OCXL)		+= ocxl/
 obj-y				+= cardreader/
 obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
+obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
new file mode 100644
index 000000000000..85d6fee468c0
--- /dev/null
+++ b/drivers/misc/hisi_hikey_usb.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for usb functionality of Hikey series boards
+ * based on Hisilicon Kirin Soc.
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+
+#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
+
+#define HUB_VBUS_POWER_ON 1
+#define HUB_VBUS_POWER_OFF 0
+#define USB_SWITCH_TO_HUB 1
+#define USB_SWITCH_TO_TYPEC 0
+#define TYPEC_VBUS_POWER_ON 1
+#define TYPEC_VBUS_POWER_OFF 0
+
+struct hisi_hikey_usb {
+	struct gpio_desc *otg_switch;
+	struct gpio_desc *typec_vbus;
+	struct gpio_desc *hub_vbus;
+
+	struct usb_role_switch *role_sw;
+	struct notifier_block nb;
+};
+
+static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
+}
+
+static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+		int switch_to)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
+}
+
+static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+		int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
+}
+
+static int hisi_hikey_role_switch(struct notifier_block *nb,
+			unsigned long state, void *data)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb;
+
+	hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
+
+	switch (state) {
+	case USB_ROLE_NONE:
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_HOST:
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_DEVICE:
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int hisi_hikey_usb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *root = dev->of_node;
+	struct hisi_hikey_usb *hisi_hikey_usb;
+	int ret;
+
+	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
+	if (!hisi_hikey_usb)
+		return -ENOMEM;
+
+	hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
+
+	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
+			GPIOD_OUT_LOW);
+	if (!hisi_hikey_usb->typec_vbus)
+		return -ENOENT;
+	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
+		return PTR_ERR(hisi_hikey_usb->typec_vbus);
+
+	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch",
+			GPIOD_OUT_HIGH);
+	if (!hisi_hikey_usb->otg_switch)
+		return -ENOENT;
+	else if (IS_ERR(hisi_hikey_usb->otg_switch))
+		return PTR_ERR(hisi_hikey_usb->otg_switch);
+
+	/* hub-vdd33-en is optional */
+	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
+			GPIOD_OUT_HIGH);
+	if (IS_ERR(hisi_hikey_usb->hub_vbus))
+		return PTR_ERR(hisi_hikey_usb->hub_vbus);
+
+	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
+	if (!hisi_hikey_usb->role_sw)
+		return -EPROBE_DEFER;
+	else if (IS_ERR(hisi_hikey_usb->role_sw))
+		return PTR_ERR(hisi_hikey_usb->role_sw);
+
+	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
+			&hisi_hikey_usb->nb);
+	if (ret) {
+		usb_role_switch_put(hisi_hikey_usb->role_sw);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, hisi_hikey_usb);
+
+	return 0;
+}
+
+static int  hisi_hikey_usb_remove(struct platform_device *pdev)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
+
+	usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
+			&hisi_hikey_usb->nb);
+
+	usb_role_switch_put(hisi_hikey_usb->role_sw);
+
+	return 0;
+}
+
+static const struct of_device_id id_table_hisi_hikey_usb[] = {
+	{.compatible = "hisilicon,gpio_hubv1"},
+	{.compatible = "hisilicon,hikey960_usb"},
+	{}
+};
+
+static struct platform_driver hisi_hikey_usb_driver = {
+	.probe = hisi_hikey_usb_probe,
+	.remove = hisi_hikey_usb_remove,
+	.driver = {
+		.name = DEVICE_DRIVER_NAME,
+		.of_match_table = id_table_hisi_hikey_usb,
+	},
+};
+
+module_platform_driver(hisi_hikey_usb_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
+MODULE_LICENSE("GPL v2");
-- 
2.15.0-rc2

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Yu Chen]

This driver handles usb hub power on and typeC port event of HiKey960 board:
1)DP&DM switching between usb hub and typeC port base on typeC port
state
2)Control power of usb hub on Hikey960
3)Control vbus of typeC port

Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Using gpiod API with the gpios.
* Removing registering usb role switch.
* Registering usb role switch notifier.
v2:
* Fix license declaration.
* Add configuration of  gpio direction.
* Remove some log print.
v3:
* Remove property of "typec_vbus_enable_val".
* Remove gpiod_direction_output and set initial value of gpio by devm_gpiod_get.
---
---
 drivers/misc/Kconfig          |   6 ++
 drivers/misc/Makefile         |   1 +
 drivers/misc/hisi_hikey_usb.c | 167 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 174 insertions(+)
 create mode 100644 drivers/misc/hisi_hikey_usb.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f417b06e11c5..8d8b717759e2 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -521,6 +521,12 @@ config PVPANIC
 	  a paravirtualized device provided by QEMU; it lets a virtual machine
 	  (guest) communicate panic events to the host.
 
+config HISI_HIKEY_USB
+	tristate "USB functionality of HiSilicon Hikey Platform"
+	depends on OF && GPIOLIB
+	help
+	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e39ccbbc1b3a..dc8892b13a1a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -59,3 +59,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 obj-$(CONFIG_OCXL)		+= ocxl/
 obj-y				+= cardreader/
 obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
+obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
new file mode 100644
index 000000000000..85d6fee468c0
--- /dev/null
+++ b/drivers/misc/hisi_hikey_usb.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for usb functionality of Hikey series boards
+ * based on Hisilicon Kirin Soc.
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+
+#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
+
+#define HUB_VBUS_POWER_ON 1
+#define HUB_VBUS_POWER_OFF 0
+#define USB_SWITCH_TO_HUB 1
+#define USB_SWITCH_TO_TYPEC 0
+#define TYPEC_VBUS_POWER_ON 1
+#define TYPEC_VBUS_POWER_OFF 0
+
+struct hisi_hikey_usb {
+	struct gpio_desc *otg_switch;
+	struct gpio_desc *typec_vbus;
+	struct gpio_desc *hub_vbus;
+
+	struct usb_role_switch *role_sw;
+	struct notifier_block nb;
+};
+
+static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
+}
+
+static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+		int switch_to)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
+}
+
+static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+		int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
+}
+
+static int hisi_hikey_role_switch(struct notifier_block *nb,
+			unsigned long state, void *data)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb;
+
+	hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
+
+	switch (state) {
+	case USB_ROLE_NONE:
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_HOST:
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_DEVICE:
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int hisi_hikey_usb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *root = dev->of_node;
+	struct hisi_hikey_usb *hisi_hikey_usb;
+	int ret;
+
+	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
+	if (!hisi_hikey_usb)
+		return -ENOMEM;
+
+	hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
+
+	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
+			GPIOD_OUT_LOW);
+	if (!hisi_hikey_usb->typec_vbus)
+		return -ENOENT;
+	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
+		return PTR_ERR(hisi_hikey_usb->typec_vbus);
+
+	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch",
+			GPIOD_OUT_HIGH);
+	if (!hisi_hikey_usb->otg_switch)
+		return -ENOENT;
+	else if (IS_ERR(hisi_hikey_usb->otg_switch))
+		return PTR_ERR(hisi_hikey_usb->otg_switch);
+
+	/* hub-vdd33-en is optional */
+	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
+			GPIOD_OUT_HIGH);
+	if (IS_ERR(hisi_hikey_usb->hub_vbus))
+		return PTR_ERR(hisi_hikey_usb->hub_vbus);
+
+	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
+	if (!hisi_hikey_usb->role_sw)
+		return -EPROBE_DEFER;
+	else if (IS_ERR(hisi_hikey_usb->role_sw))
+		return PTR_ERR(hisi_hikey_usb->role_sw);
+
+	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
+			&hisi_hikey_usb->nb);
+	if (ret) {
+		usb_role_switch_put(hisi_hikey_usb->role_sw);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, hisi_hikey_usb);
+
+	return 0;
+}
+
+static int  hisi_hikey_usb_remove(struct platform_device *pdev)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
+
+	usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
+			&hisi_hikey_usb->nb);
+
+	usb_role_switch_put(hisi_hikey_usb->role_sw);
+
+	return 0;
+}
+
+static const struct of_device_id id_table_hisi_hikey_usb[] = {
+	{.compatible = "hisilicon,gpio_hubv1"},
+	{.compatible = "hisilicon,hikey960_usb"},
+	{}
+};
+
+static struct platform_driver hisi_hikey_usb_driver = {
+	.probe = hisi_hikey_usb_probe,
+	.remove = hisi_hikey_usb_remove,
+	.driver = {
+		.name = DEVICE_DRIVER_NAME,
+		.of_match_table = id_table_hisi_hikey_usb,
+	},
+};
+
+module_platform_driver(hisi_hikey_usb_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
+MODULE_LICENSE("GPL v2");

[PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Yu Chen]

This driver handles usb hub power on and typeC port event of HiKey960 board:
1)DP&DM switching between usb hub and typeC port base on typeC port
state
2)Control power of usb hub on Hikey960
3)Control vbus of typeC port

Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Using gpiod API with the gpios.
* Removing registering usb role switch.
* Registering usb role switch notifier.
v2:
* Fix license declaration.
* Add configuration of  gpio direction.
* Remove some log print.
v3:
* Remove property of "typec_vbus_enable_val".
* Remove gpiod_direction_output and set initial value of gpio by devm_gpiod_get.
---
---
 drivers/misc/Kconfig          |   6 ++
 drivers/misc/Makefile         |   1 +
 drivers/misc/hisi_hikey_usb.c | 167 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 174 insertions(+)
 create mode 100644 drivers/misc/hisi_hikey_usb.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f417b06e11c5..8d8b717759e2 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -521,6 +521,12 @@ config PVPANIC
 	  a paravirtualized device provided by QEMU; it lets a virtual machine
 	  (guest) communicate panic events to the host.
 
+config HISI_HIKEY_USB
+	tristate "USB functionality of HiSilicon Hikey Platform"
+	depends on OF && GPIOLIB
+	help
+	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e39ccbbc1b3a..dc8892b13a1a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -59,3 +59,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 obj-$(CONFIG_OCXL)		+= ocxl/
 obj-y				+= cardreader/
 obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
+obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
new file mode 100644
index 000000000000..85d6fee468c0
--- /dev/null
+++ b/drivers/misc/hisi_hikey_usb.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for usb functionality of Hikey series boards
+ * based on Hisilicon Kirin Soc.
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+
+#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
+
+#define HUB_VBUS_POWER_ON 1
+#define HUB_VBUS_POWER_OFF 0
+#define USB_SWITCH_TO_HUB 1
+#define USB_SWITCH_TO_TYPEC 0
+#define TYPEC_VBUS_POWER_ON 1
+#define TYPEC_VBUS_POWER_OFF 0
+
+struct hisi_hikey_usb {
+	struct gpio_desc *otg_switch;
+	struct gpio_desc *typec_vbus;
+	struct gpio_desc *hub_vbus;
+
+	struct usb_role_switch *role_sw;
+	struct notifier_block nb;
+};
+
+static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
+}
+
+static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+		int switch_to)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
+}
+
+static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+		int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
+}
+
+static int hisi_hikey_role_switch(struct notifier_block *nb,
+			unsigned long state, void *data)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb;
+
+	hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
+
+	switch (state) {
+	case USB_ROLE_NONE:
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_HOST:
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_DEVICE:
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int hisi_hikey_usb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *root = dev->of_node;
+	struct hisi_hikey_usb *hisi_hikey_usb;
+	int ret;
+
+	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
+	if (!hisi_hikey_usb)
+		return -ENOMEM;
+
+	hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
+
+	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
+			GPIOD_OUT_LOW);
+	if (!hisi_hikey_usb->typec_vbus)
+		return -ENOENT;
+	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
+		return PTR_ERR(hisi_hikey_usb->typec_vbus);
+
+	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch",
+			GPIOD_OUT_HIGH);
+	if (!hisi_hikey_usb->otg_switch)
+		return -ENOENT;
+	else if (IS_ERR(hisi_hikey_usb->otg_switch))
+		return PTR_ERR(hisi_hikey_usb->otg_switch);
+
+	/* hub-vdd33-en is optional */
+	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
+			GPIOD_OUT_HIGH);
+	if (IS_ERR(hisi_hikey_usb->hub_vbus))
+		return PTR_ERR(hisi_hikey_usb->hub_vbus);
+
+	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
+	if (!hisi_hikey_usb->role_sw)
+		return -EPROBE_DEFER;
+	else if (IS_ERR(hisi_hikey_usb->role_sw))
+		return PTR_ERR(hisi_hikey_usb->role_sw);
+
+	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
+			&hisi_hikey_usb->nb);
+	if (ret) {
+		usb_role_switch_put(hisi_hikey_usb->role_sw);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, hisi_hikey_usb);
+
+	return 0;
+}
+
+static int  hisi_hikey_usb_remove(struct platform_device *pdev)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
+
+	usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
+			&hisi_hikey_usb->nb);
+
+	usb_role_switch_put(hisi_hikey_usb->role_sw);
+
+	return 0;
+}
+
+static const struct of_device_id id_table_hisi_hikey_usb[] = {
+	{.compatible = "hisilicon,gpio_hubv1"},
+	{.compatible = "hisilicon,hikey960_usb"},
+	{}
+};
+
+static struct platform_driver hisi_hikey_usb_driver = {
+	.probe = hisi_hikey_usb_probe,
+	.remove = hisi_hikey_usb_remove,
+	.driver = {
+		.name = DEVICE_DRIVER_NAME,
+		.of_match_table = id_table_hisi_hikey_usb,
+	},
+};
+
+module_platform_driver(hisi_hikey_usb_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
+MODULE_LICENSE("GPL v2");
-- 
2.15.0-rc2

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Andy Shevchenko]

On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:
>
> This driver handles usb hub power on and typeC port event of HiKey960 board:
> 1)DP&DM switching between usb hub and typeC port base on typeC port
> state
> 2)Control power of usb hub on Hikey960
> 3)Control vbus of typeC port

> +config HISI_HIKEY_USB
> +       tristate "USB functionality of HiSilicon Hikey Platform"
> +       depends on OF && GPIOLIB
> +       help
> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.

> +#include <linux/of.h>

It's hard to see why this have
depends on OF followed by above header inclusion.

> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> +                       GPIOD_OUT_LOW);

> +       if (!hisi_hikey_usb->typec_vbus)
> +               return -ENOENT;

Hmm... Is it possible to get NULL pointer from gpiod_get() at all?

> +       if (!hisi_hikey_usb->otg_switch)
> +               return -ENOENT;

Ditto.

> +       /* hub-vdd33-en is optional */
> +       hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
> +                       GPIOD_OUT_HIGH);

devm_gpio_get_optional() if it's indeed optional.

> +       hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> +       if (!hisi_hikey_usb->role_sw)
> +               return -EPROBE_DEFER;

> +       else if (IS_ERR(hisi_hikey_usb->role_sw))

Redundant 'else'

> +               return PTR_ERR(hisi_hikey_usb->role_sw);

> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
> +       {.compatible = "hisilicon,gpio_hubv1"},
> +       {.compatible = "hisilicon,hikey960_usb"},
> +       {}
> +};

MODULE_DEVICE_TABLE()?

-- 
With Best Regards,
Andy Shevchenko

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Andy Shevchenko]

On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:
>
> This driver handles usb hub power on and typeC port event of HiKey960 board:
> 1)DP&DM switching between usb hub and typeC port base on typeC port
> state
> 2)Control power of usb hub on Hikey960
> 3)Control vbus of typeC port

> +config HISI_HIKEY_USB
> +       tristate "USB functionality of HiSilicon Hikey Platform"
> +       depends on OF && GPIOLIB
> +       help
> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.

> +#include <linux/of.h>

It's hard to see why this have
depends on OF followed by above header inclusion.

> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> +                       GPIOD_OUT_LOW);

> +       if (!hisi_hikey_usb->typec_vbus)
> +               return -ENOENT;

Hmm... Is it possible to get NULL pointer from gpiod_get() at all?

> +       if (!hisi_hikey_usb->otg_switch)
> +               return -ENOENT;

Ditto.

> +       /* hub-vdd33-en is optional */
> +       hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
> +                       GPIOD_OUT_HIGH);

devm_gpio_get_optional() if it's indeed optional.

> +       hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> +       if (!hisi_hikey_usb->role_sw)
> +               return -EPROBE_DEFER;

> +       else if (IS_ERR(hisi_hikey_usb->role_sw))

Redundant 'else'

> +               return PTR_ERR(hisi_hikey_usb->role_sw);

> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
> +       {.compatible = "hisilicon,gpio_hubv1"},
> +       {.compatible = "hisilicon,hikey960_usb"},
> +       {}
> +};

MODULE_DEVICE_TABLE()?

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chen Yu]

Hi Andy,

On 2019/3/3 0:01, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> This driver handles usb hub power on and typeC port event of HiKey960 board:
>> 1)DP&DM switching between usb hub and typeC port base on typeC port
>> state
>> 2)Control power of usb hub on Hikey960
>> 3)Control vbus of typeC port
> 
>> +config HISI_HIKEY_USB
>> +       tristate "USB functionality of HiSilicon Hikey Platform"
>> +       depends on OF && GPIOLIB
>> +       help
>> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> 
>> +#include <linux/of.h>
> 
> It's hard to see why this have
> depends on OF followed by above header inclusion.
> 
This driver depends on devicetree, so I add "depends on OF".
But is seems that "#include <linux/of.h>" can be removed after "of_" API
have been removed. Thanks for your reminder!
>> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
>> +                       GPIOD_OUT_LOW);
> 
>> +       if (!hisi_hikey_usb->typec_vbus)
>> +               return -ENOENT;
> 
> Hmm... Is it possible to get NULL pointer from gpiod_get() at all?
> 
>> +       if (!hisi_hikey_usb->otg_switch)
>> +               return -ENOENT;
> 
> Ditto.
> 
I check the comments of devm_gpio_get API, it will not return NULL pointer.
But is it more safe to keep the NULL checking? What is your advice?
>> +       /* hub-vdd33-en is optional */
>> +       hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
>> +                       GPIOD_OUT_HIGH);
> 
> devm_gpio_get_optional() if it's indeed optional.
> 
OK.Thanks!
>> +       hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
>> +       if (!hisi_hikey_usb->role_sw)
>> +               return -EPROBE_DEFER;
> 
>> +       else if (IS_ERR(hisi_hikey_usb->role_sw))
> 
> Redundant 'else'
> 
OK.
>> +               return PTR_ERR(hisi_hikey_usb->role_sw);
> 
>> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
>> +       {.compatible = "hisilicon,gpio_hubv1"},
>> +       {.compatible = "hisilicon,hikey960_usb"},
>> +       {}
>> +};
> 
> MODULE_DEVICE_TABLE()?
> 
OK.

Thanks
Yu Chen

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Yu Chen]

Hi Andy,

On 2019/3/3 0:01, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> This driver handles usb hub power on and typeC port event of HiKey960 board:
>> 1)DP&DM switching between usb hub and typeC port base on typeC port
>> state
>> 2)Control power of usb hub on Hikey960
>> 3)Control vbus of typeC port
> 
>> +config HISI_HIKEY_USB
>> +       tristate "USB functionality of HiSilicon Hikey Platform"
>> +       depends on OF && GPIOLIB
>> +       help
>> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> 
>> +#include <linux/of.h>
> 
> It's hard to see why this have
> depends on OF followed by above header inclusion.
> 
This driver depends on devicetree, so I add "depends on OF".
But is seems that "#include <linux/of.h>" can be removed after "of_" API
have been removed. Thanks for your reminder!
>> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
>> +                       GPIOD_OUT_LOW);
> 
>> +       if (!hisi_hikey_usb->typec_vbus)
>> +               return -ENOENT;
> 
> Hmm... Is it possible to get NULL pointer from gpiod_get() at all?
> 
>> +       if (!hisi_hikey_usb->otg_switch)
>> +               return -ENOENT;
> 
> Ditto.
> 
I check the comments of devm_gpio_get API, it will not return NULL pointer.
But is it more safe to keep the NULL checking? What is your advice?
>> +       /* hub-vdd33-en is optional */
>> +       hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
>> +                       GPIOD_OUT_HIGH);
> 
> devm_gpio_get_optional() if it's indeed optional.
> 
OK.Thanks!
>> +       hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
>> +       if (!hisi_hikey_usb->role_sw)
>> +               return -EPROBE_DEFER;
> 
>> +       else if (IS_ERR(hisi_hikey_usb->role_sw))
> 
> Redundant 'else'
> 
OK.
>> +               return PTR_ERR(hisi_hikey_usb->role_sw);
> 
>> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
>> +       {.compatible = "hisilicon,gpio_hubv1"},
>> +       {.compatible = "hisilicon,hikey960_usb"},
>> +       {}
>> +};
> 
> MODULE_DEVICE_TABLE()?
> 
OK.

Thanks
Yu Chen

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chen Yu]

Hi Andy,

On 2019/3/3 0:01, Andy Shevchenko wrote:
> On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:
>>
>> This driver handles usb hub power on and typeC port event of HiKey960 board:
>> 1)DP&DM switching between usb hub and typeC port base on typeC port
>> state
>> 2)Control power of usb hub on Hikey960
>> 3)Control vbus of typeC port
> 
>> +config HISI_HIKEY_USB
>> +       tristate "USB functionality of HiSilicon Hikey Platform"
>> +       depends on OF && GPIOLIB
>> +       help
>> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> 
>> +#include <linux/of.h>
> 
> It's hard to see why this have
> depends on OF followed by above header inclusion.
> 
This driver depends on devicetree, so I add "depends on OF".
But is seems that "#include <linux/of.h>" can be removed after "of_" API
have been removed. Thanks for your reminder!
>> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
>> +                       GPIOD_OUT_LOW);
> 
>> +       if (!hisi_hikey_usb->typec_vbus)
>> +               return -ENOENT;
> 
> Hmm... Is it possible to get NULL pointer from gpiod_get() at all?
> 
>> +       if (!hisi_hikey_usb->otg_switch)
>> +               return -ENOENT;
> 
> Ditto.
> 
I check the comments of devm_gpio_get API, it will not return NULL pointer.
But is it more safe to keep the NULL checking? What is your advice?
>> +       /* hub-vdd33-en is optional */
>> +       hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
>> +                       GPIOD_OUT_HIGH);
> 
> devm_gpio_get_optional() if it's indeed optional.
> 
OK.Thanks!
>> +       hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
>> +       if (!hisi_hikey_usb->role_sw)
>> +               return -EPROBE_DEFER;
> 
>> +       else if (IS_ERR(hisi_hikey_usb->role_sw))
> 
> Redundant 'else'
> 
OK.
>> +               return PTR_ERR(hisi_hikey_usb->role_sw);
> 
>> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
>> +       {.compatible = "hisilicon,gpio_hubv1"},
>> +       {.compatible = "hisilicon,hikey960_usb"},
>> +       {}
>> +};
> 
> MODULE_DEVICE_TABLE()?
> 
OK.

Thanks
Yu Chen

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Andy Shevchenko]

On Mon, Mar 4, 2019 at 4:35 AM Chen Yu <chenyu56@huawei.com> wrote:
> On 2019/3/3 0:01, Andy Shevchenko wrote:
> > On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:

> >> +config HISI_HIKEY_USB
> >> +       tristate "USB functionality of HiSilicon Hikey Platform"
> >> +       depends on OF && GPIOLIB
> >> +       help
> >> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> >
> >> +#include <linux/of.h>
> >
> > It's hard to see why this have
> > depends on OF followed by above header inclusion.
> >
> This driver depends on devicetree, so I add "depends on OF".
> But is seems that "#include <linux/of.h>" can be removed after "of_" API
> have been removed. Thanks for your reminder!

So, it means that technically there is no such dependency, rather
administratively.

> >> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> >> +                       GPIOD_OUT_LOW);
> >
> >> +       if (!hisi_hikey_usb->typec_vbus)
> >> +               return -ENOENT;
> >
> > Hmm... Is it possible to get NULL pointer from gpiod_get() at all?
> >
> >> +       if (!hisi_hikey_usb->otg_switch)
> >> +               return -ENOENT;
> >
> > Ditto.
> >
> I check the comments of devm_gpio_get API, it will not return NULL pointer.
> But is it more safe to keep the NULL checking? What is your advice?

Why do we need dead code?

-- 
With Best Regards,
Andy Shevchenko

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Andy Shevchenko]

On Mon, Mar 4, 2019 at 4:35 AM Chen Yu <chenyu56@huawei.com> wrote:
> On 2019/3/3 0:01, Andy Shevchenko wrote:
> > On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:

> >> +config HISI_HIKEY_USB
> >> +       tristate "USB functionality of HiSilicon Hikey Platform"
> >> +       depends on OF && GPIOLIB
> >> +       help
> >> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> >
> >> +#include <linux/of.h>
> >
> > It's hard to see why this have
> > depends on OF followed by above header inclusion.
> >
> This driver depends on devicetree, so I add "depends on OF".
> But is seems that "#include <linux/of.h>" can be removed after "of_" API
> have been removed. Thanks for your reminder!

So, it means that technically there is no such dependency, rather
administratively.

> >> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> >> +                       GPIOD_OUT_LOW);
> >
> >> +       if (!hisi_hikey_usb->typec_vbus)
> >> +               return -ENOENT;
> >
> > Hmm... Is it possible to get NULL pointer from gpiod_get() at all?
> >
> >> +       if (!hisi_hikey_usb->otg_switch)
> >> +               return -ENOENT;
> >
> > Ditto.
> >
> I check the comments of devm_gpio_get API, it will not return NULL pointer.
> But is it more safe to keep the NULL checking? What is your advice?

Why do we need dead code?

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chen Yu]

Hi,

On 2019/3/4 14:55, Andy Shevchenko wrote:
> On Mon, Mar 4, 2019 at 4:35 AM Chen Yu <chenyu56@huawei.com> wrote:
>> On 2019/3/3 0:01, Andy Shevchenko wrote:
>>> On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:
> 
>>>> +config HISI_HIKEY_USB
>>>> +       tristate "USB functionality of HiSilicon Hikey Platform"
>>>> +       depends on OF && GPIOLIB
>>>> +       help
>>>> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
>>>
>>>> +#include <linux/of.h>
>>>
>>> It's hard to see why this have
>>> depends on OF followed by above header inclusion.
>>>
>> This driver depends on devicetree, so I add "depends on OF".
>> But is seems that "#include <linux/of.h>" can be removed after "of_" API
>> have been removed. Thanks for your reminder!
> 
> So, it means that technically there is no such dependency, rather
> administratively.
> 
OK. I will remove the dependent next version.
>>>> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
>>>> +                       GPIOD_OUT_LOW);
>>>
>>>> +       if (!hisi_hikey_usb->typec_vbus)
>>>> +               return -ENOENT;
>>>
>>> Hmm... Is it possible to get NULL pointer from gpiod_get() at all?
>>>
>>>> +       if (!hisi_hikey_usb->otg_switch)
>>>> +               return -ENOENT;
>>>
>>> Ditto.
>>>
>> I check the comments of devm_gpio_get API, it will not return NULL pointer.
>> But is it more safe to keep the NULL checking? What is your advice?
> 
> Why do we need dead code?
> 
OK.I will remove it.

Thanks
Yu Chen

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Yu Chen]

Hi,

On 2019/3/4 14:55, Andy Shevchenko wrote:
> On Mon, Mar 4, 2019 at 4:35 AM Chen Yu <chenyu56@huawei.com> wrote:
>> On 2019/3/3 0:01, Andy Shevchenko wrote:
>>> On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:
> 
>>>> +config HISI_HIKEY_USB
>>>> +       tristate "USB functionality of HiSilicon Hikey Platform"
>>>> +       depends on OF && GPIOLIB
>>>> +       help
>>>> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
>>>
>>>> +#include <linux/of.h>
>>>
>>> It's hard to see why this have
>>> depends on OF followed by above header inclusion.
>>>
>> This driver depends on devicetree, so I add "depends on OF".
>> But is seems that "#include <linux/of.h>" can be removed after "of_" API
>> have been removed. Thanks for your reminder!
> 
> So, it means that technically there is no such dependency, rather
> administratively.
> 
OK. I will remove the dependent next version.
>>>> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
>>>> +                       GPIOD_OUT_LOW);
>>>
>>>> +       if (!hisi_hikey_usb->typec_vbus)
>>>> +               return -ENOENT;
>>>
>>> Hmm... Is it possible to get NULL pointer from gpiod_get() at all?
>>>
>>>> +       if (!hisi_hikey_usb->otg_switch)
>>>> +               return -ENOENT;
>>>
>>> Ditto.
>>>
>> I check the comments of devm_gpio_get API, it will not return NULL pointer.
>> But is it more safe to keep the NULL checking? What is your advice?
> 
> Why do we need dead code?
> 
OK.I will remove it.

Thanks
Yu Chen

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chen Yu]

Hi,

On 2019/3/4 14:55, Andy Shevchenko wrote:
> On Mon, Mar 4, 2019 at 4:35 AM Chen Yu <chenyu56@huawei.com> wrote:
>> On 2019/3/3 0:01, Andy Shevchenko wrote:
>>> On Sat, Mar 2, 2019 at 11:05 AM Yu Chen <chenyu56@huawei.com> wrote:
> 
>>>> +config HISI_HIKEY_USB
>>>> +       tristate "USB functionality of HiSilicon Hikey Platform"
>>>> +       depends on OF && GPIOLIB
>>>> +       help
>>>> +         If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
>>>
>>>> +#include <linux/of.h>
>>>
>>> It's hard to see why this have
>>> depends on OF followed by above header inclusion.
>>>
>> This driver depends on devicetree, so I add "depends on OF".
>> But is seems that "#include <linux/of.h>" can be removed after "of_" API
>> have been removed. Thanks for your reminder!
> 
> So, it means that technically there is no such dependency, rather
> administratively.
> 
OK. I will remove the dependent next version.
>>>> +       hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
>>>> +                       GPIOD_OUT_LOW);
>>>
>>>> +       if (!hisi_hikey_usb->typec_vbus)
>>>> +               return -ENOENT;
>>>
>>> Hmm... Is it possible to get NULL pointer from gpiod_get() at all?
>>>
>>>> +       if (!hisi_hikey_usb->otg_switch)
>>>> +               return -ENOENT;
>>>
>>> Ditto.
>>>
>> I check the comments of devm_gpio_get API, it will not return NULL pointer.
>> But is it more safe to keep the NULL checking? What is your advice?
> 
> Why do we need dead code?
> 
OK.I will remove it.

Thanks
Yu Chen

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[John Stultz]

On Sat, Mar 2, 2019 at 4:05 AM Yu Chen <chenyu56@huawei.com> wrote:
> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct device_node *root = dev->of_node;

Minor nit: root is unused and generates build warnings.

thanks
-john

[v3,10/12] hikey960: Support usb functionality of Hikey960

[John Stultz]

On Sat, Mar 2, 2019 at 4:05 AM Yu Chen <chenyu56@huawei.com> wrote:
> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct device_node *root = dev->of_node;

Minor nit: root is unused and generates build warnings.

thanks
-john

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[John Stultz]

On Sat, Mar 2, 2019 at 4:05 AM Yu Chen <chenyu56@huawei.com> wrote:
> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct device_node *root = dev->of_node;

Minor nit: root is unused and generates build warnings.

thanks
-john

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chen Yu]

On 2019/3/4 4:17, John Stultz wrote:
> On Sat, Mar 2, 2019 at 4:05 AM Yu Chen <chenyu56@huawei.com> wrote:
>> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct device_node *root = dev->of_node;
> 
> Minor nit: root is unused and generates build warnings.
> 
OK. Thanks!

> thanks
> -john
> 
> .
> 

Thanks
Yu Chen

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Yu Chen]

On 2019/3/4 4:17, John Stultz wrote:
> On Sat, Mar 2, 2019 at 4:05 AM Yu Chen <chenyu56@huawei.com> wrote:
>> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct device_node *root = dev->of_node;
> 
> Minor nit: root is unused and generates build warnings.
> 
OK. Thanks!

> thanks
> -john
> 
> .
> 

Thanks
Yu Chen

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chen Yu]

On 2019/3/4 4:17, John Stultz wrote:
> On Sat, Mar 2, 2019 at 4:05 AM Yu Chen <chenyu56@huawei.com> wrote:
>> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct device_node *root = dev->of_node;
> 
> Minor nit: root is unused and generates build warnings.
> 
OK. Thanks!

> thanks
> -john
> 
> .
> 

Thanks
Yu Chen

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chunfeng Yun]

hi,
On Sat, 2019-03-02 at 17:05 +0800, Yu Chen wrote:
> This driver handles usb hub power on and typeC port event of HiKey960 board:
> 1)DP&DM switching between usb hub and typeC port base on typeC port
> state
> 2)Control power of usb hub on Hikey960
> 3)Control vbus of typeC port
> 
> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
> v1:
> * Using gpiod API with the gpios.
> * Removing registering usb role switch.
> * Registering usb role switch notifier.
> v2:
> * Fix license declaration.
> * Add configuration of  gpio direction.
> * Remove some log print.
> v3:
> * Remove property of "typec_vbus_enable_val".
> * Remove gpiod_direction_output and set initial value of gpio by devm_gpiod_get.
> ---
> ---
>  drivers/misc/Kconfig          |   6 ++
>  drivers/misc/Makefile         |   1 +
>  drivers/misc/hisi_hikey_usb.c | 167 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 174 insertions(+)
>  create mode 100644 drivers/misc/hisi_hikey_usb.c
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index f417b06e11c5..8d8b717759e2 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -521,6 +521,12 @@ config PVPANIC
>  	  a paravirtualized device provided by QEMU; it lets a virtual machine
>  	  (guest) communicate panic events to the host.
>  
> +config HISI_HIKEY_USB
> +	tristate "USB functionality of HiSilicon Hikey Platform"
> +	depends on OF && GPIOLIB
> +	help
> +	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index e39ccbbc1b3a..dc8892b13a1a 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -59,3 +59,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
>  obj-$(CONFIG_OCXL)		+= ocxl/
>  obj-y				+= cardreader/
>  obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
> +obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
> diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
> new file mode 100644
> index 000000000000..85d6fee468c0
> --- /dev/null
> +++ b/drivers/misc/hisi_hikey_usb.c
> @@ -0,0 +1,167 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Support for usb functionality of Hikey series boards
> + * based on Hisilicon Kirin Soc.
> + *
> + * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
> + *		http://www.huawei.com
> + *
> + * Authors: Yu Chen <chenyu56@huawei.com>
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/usb/role.h>
> +
> +#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
> +
> +#define HUB_VBUS_POWER_ON 1
> +#define HUB_VBUS_POWER_OFF 0
> +#define USB_SWITCH_TO_HUB 1
> +#define USB_SWITCH_TO_TYPEC 0
> +#define TYPEC_VBUS_POWER_ON 1
> +#define TYPEC_VBUS_POWER_OFF 0
> +
> +struct hisi_hikey_usb {
> +	struct gpio_desc *otg_switch;
> +	struct gpio_desc *typec_vbus;
> +	struct gpio_desc *hub_vbus;
> +
> +	struct usb_role_switch *role_sw;
> +	struct notifier_block nb;
> +};
> +
> +static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
> +}
> +
> +static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
> +		int switch_to)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
> +}
> +
> +static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
> +		int value)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
> +}
> +
> +static int hisi_hikey_role_switch(struct notifier_block *nb,
> +			unsigned long state, void *data)
> +{
> +	struct hisi_hikey_usb *hisi_hikey_usb;
> +
> +	hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
> +
> +	switch (state) {
> +	case USB_ROLE_NONE:
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
> +		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
> +		break;
> +	case USB_ROLE_HOST:
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON);
> +		break;
> +	case USB_ROLE_DEVICE:
> +		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *root = dev->of_node;
> +	struct hisi_hikey_usb *hisi_hikey_usb;
> +	int ret;
> +
> +	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
> +	if (!hisi_hikey_usb)
> +		return -ENOMEM;
> +
> +	hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
> +
> +	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> +			GPIOD_OUT_LOW);
> +	if (!hisi_hikey_usb->typec_vbus)
> +		return -ENOENT;
> +	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
> +		return PTR_ERR(hisi_hikey_usb->typec_vbus);
> +
> +	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch",
> +			GPIOD_OUT_HIGH);
> +	if (!hisi_hikey_usb->otg_switch)
> +		return -ENOENT;
> +	else if (IS_ERR(hisi_hikey_usb->otg_switch))
> +		return PTR_ERR(hisi_hikey_usb->otg_switch);
> +
> +	/* hub-vdd33-en is optional */
> +	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
> +			GPIOD_OUT_HIGH);
> +	if (IS_ERR(hisi_hikey_usb->hub_vbus))
> +		return PTR_ERR(hisi_hikey_usb->hub_vbus);
> +
> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> +	if (!hisi_hikey_usb->role_sw)
> +		return -EPROBE_DEFER;
Here return EPROBE_DEFFER means the related device_connection is
registered after this probe is called, right?
if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
> +		return PTR_ERR(hisi_hikey_usb->role_sw);
> +
> +	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
> +			&hisi_hikey_usb->nb);
> +	if (ret) {
> +		usb_role_switch_put(hisi_hikey_usb->role_sw);
> +		return ret;
> +	}
> +
> +	platform_set_drvdata(pdev, hisi_hikey_usb);
> +
> +	return 0;
> +}
> +
> +static int  hisi_hikey_usb_remove(struct platform_device *pdev)
> +{
> +	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
> +
> +	usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
> +			&hisi_hikey_usb->nb);
> +
> +	usb_role_switch_put(hisi_hikey_usb->role_sw);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
> +	{.compatible = "hisilicon,gpio_hubv1"},
> +	{.compatible = "hisilicon,hikey960_usb"},
> +	{}
> +};
> +
> +static struct platform_driver hisi_hikey_usb_driver = {
> +	.probe = hisi_hikey_usb_probe,
> +	.remove = hisi_hikey_usb_remove,
> +	.driver = {
> +		.name = DEVICE_DRIVER_NAME,
> +		.of_match_table = id_table_hisi_hikey_usb,
> +	},
> +};
> +
> +module_platform_driver(hisi_hikey_usb_driver);
> +
> +MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
> +MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
> +MODULE_LICENSE("GPL v2");

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Chunfeng Yun]

hi,
On Sat, 2019-03-02 at 17:05 +0800, Yu Chen wrote:
> This driver handles usb hub power on and typeC port event of HiKey960 board:
> 1)DP&DM switching between usb hub and typeC port base on typeC port
> state
> 2)Control power of usb hub on Hikey960
> 3)Control vbus of typeC port
> 
> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
> v1:
> * Using gpiod API with the gpios.
> * Removing registering usb role switch.
> * Registering usb role switch notifier.
> v2:
> * Fix license declaration.
> * Add configuration of  gpio direction.
> * Remove some log print.
> v3:
> * Remove property of "typec_vbus_enable_val".
> * Remove gpiod_direction_output and set initial value of gpio by devm_gpiod_get.
> ---
> ---
>  drivers/misc/Kconfig          |   6 ++
>  drivers/misc/Makefile         |   1 +
>  drivers/misc/hisi_hikey_usb.c | 167 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 174 insertions(+)
>  create mode 100644 drivers/misc/hisi_hikey_usb.c
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index f417b06e11c5..8d8b717759e2 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -521,6 +521,12 @@ config PVPANIC
>  	  a paravirtualized device provided by QEMU; it lets a virtual machine
>  	  (guest) communicate panic events to the host.
>  
> +config HISI_HIKEY_USB
> +	tristate "USB functionality of HiSilicon Hikey Platform"
> +	depends on OF && GPIOLIB
> +	help
> +	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index e39ccbbc1b3a..dc8892b13a1a 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -59,3 +59,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
>  obj-$(CONFIG_OCXL)		+= ocxl/
>  obj-y				+= cardreader/
>  obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
> +obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
> diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
> new file mode 100644
> index 000000000000..85d6fee468c0
> --- /dev/null
> +++ b/drivers/misc/hisi_hikey_usb.c
> @@ -0,0 +1,167 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Support for usb functionality of Hikey series boards
> + * based on Hisilicon Kirin Soc.
> + *
> + * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
> + *		http://www.huawei.com
> + *
> + * Authors: Yu Chen <chenyu56@huawei.com>
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/usb/role.h>
> +
> +#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
> +
> +#define HUB_VBUS_POWER_ON 1
> +#define HUB_VBUS_POWER_OFF 0
> +#define USB_SWITCH_TO_HUB 1
> +#define USB_SWITCH_TO_TYPEC 0
> +#define TYPEC_VBUS_POWER_ON 1
> +#define TYPEC_VBUS_POWER_OFF 0
> +
> +struct hisi_hikey_usb {
> +	struct gpio_desc *otg_switch;
> +	struct gpio_desc *typec_vbus;
> +	struct gpio_desc *hub_vbus;
> +
> +	struct usb_role_switch *role_sw;
> +	struct notifier_block nb;
> +};
> +
> +static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
> +}
> +
> +static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
> +		int switch_to)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
> +}
> +
> +static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
> +		int value)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
> +}
> +
> +static int hisi_hikey_role_switch(struct notifier_block *nb,
> +			unsigned long state, void *data)
> +{
> +	struct hisi_hikey_usb *hisi_hikey_usb;
> +
> +	hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
> +
> +	switch (state) {
> +	case USB_ROLE_NONE:
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
> +		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
> +		break;
> +	case USB_ROLE_HOST:
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON);
> +		break;
> +	case USB_ROLE_DEVICE:
> +		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *root = dev->of_node;
> +	struct hisi_hikey_usb *hisi_hikey_usb;
> +	int ret;
> +
> +	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
> +	if (!hisi_hikey_usb)
> +		return -ENOMEM;
> +
> +	hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
> +
> +	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> +			GPIOD_OUT_LOW);
> +	if (!hisi_hikey_usb->typec_vbus)
> +		return -ENOENT;
> +	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
> +		return PTR_ERR(hisi_hikey_usb->typec_vbus);
> +
> +	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch",
> +			GPIOD_OUT_HIGH);
> +	if (!hisi_hikey_usb->otg_switch)
> +		return -ENOENT;
> +	else if (IS_ERR(hisi_hikey_usb->otg_switch))
> +		return PTR_ERR(hisi_hikey_usb->otg_switch);
> +
> +	/* hub-vdd33-en is optional */
> +	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
> +			GPIOD_OUT_HIGH);
> +	if (IS_ERR(hisi_hikey_usb->hub_vbus))
> +		return PTR_ERR(hisi_hikey_usb->hub_vbus);
> +
> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> +	if (!hisi_hikey_usb->role_sw)
> +		return -EPROBE_DEFER;
Here return EPROBE_DEFFER means the related device_connection is
registered after this probe is called, right?
if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
> +		return PTR_ERR(hisi_hikey_usb->role_sw);
> +
> +	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
> +			&hisi_hikey_usb->nb);
> +	if (ret) {
> +		usb_role_switch_put(hisi_hikey_usb->role_sw);
> +		return ret;
> +	}
> +
> +	platform_set_drvdata(pdev, hisi_hikey_usb);
> +
> +	return 0;
> +}
> +
> +static int  hisi_hikey_usb_remove(struct platform_device *pdev)
> +{
> +	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
> +
> +	usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
> +			&hisi_hikey_usb->nb);
> +
> +	usb_role_switch_put(hisi_hikey_usb->role_sw);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
> +	{.compatible = "hisilicon,gpio_hubv1"},
> +	{.compatible = "hisilicon,hikey960_usb"},
> +	{}
> +};
> +
> +static struct platform_driver hisi_hikey_usb_driver = {
> +	.probe = hisi_hikey_usb_probe,
> +	.remove = hisi_hikey_usb_remove,
> +	.driver = {
> +		.name = DEVICE_DRIVER_NAME,
> +		.of_match_table = id_table_hisi_hikey_usb,
> +	},
> +};
> +
> +module_platform_driver(hisi_hikey_usb_driver);
> +
> +MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
> +MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
> +MODULE_LICENSE("GPL v2");

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chunfeng Yun]

hi,
On Sat, 2019-03-02 at 17:05 +0800, Yu Chen wrote:
> This driver handles usb hub power on and typeC port event of HiKey960 board:
> 1)DP&DM switching between usb hub and typeC port base on typeC port
> state
> 2)Control power of usb hub on Hikey960
> 3)Control vbus of typeC port
> 
> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
> v1:
> * Using gpiod API with the gpios.
> * Removing registering usb role switch.
> * Registering usb role switch notifier.
> v2:
> * Fix license declaration.
> * Add configuration of  gpio direction.
> * Remove some log print.
> v3:
> * Remove property of "typec_vbus_enable_val".
> * Remove gpiod_direction_output and set initial value of gpio by devm_gpiod_get.
> ---
> ---
>  drivers/misc/Kconfig          |   6 ++
>  drivers/misc/Makefile         |   1 +
>  drivers/misc/hisi_hikey_usb.c | 167 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 174 insertions(+)
>  create mode 100644 drivers/misc/hisi_hikey_usb.c
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index f417b06e11c5..8d8b717759e2 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -521,6 +521,12 @@ config PVPANIC
>  	  a paravirtualized device provided by QEMU; it lets a virtual machine
>  	  (guest) communicate panic events to the host.
>  
> +config HISI_HIKEY_USB
> +	tristate "USB functionality of HiSilicon Hikey Platform"
> +	depends on OF && GPIOLIB
> +	help
> +	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index e39ccbbc1b3a..dc8892b13a1a 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -59,3 +59,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
>  obj-$(CONFIG_OCXL)		+= ocxl/
>  obj-y				+= cardreader/
>  obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
> +obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
> diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
> new file mode 100644
> index 000000000000..85d6fee468c0
> --- /dev/null
> +++ b/drivers/misc/hisi_hikey_usb.c
> @@ -0,0 +1,167 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Support for usb functionality of Hikey series boards
> + * based on Hisilicon Kirin Soc.
> + *
> + * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
> + *		http://www.huawei.com
> + *
> + * Authors: Yu Chen <chenyu56@huawei.com>
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/usb/role.h>
> +
> +#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
> +
> +#define HUB_VBUS_POWER_ON 1
> +#define HUB_VBUS_POWER_OFF 0
> +#define USB_SWITCH_TO_HUB 1
> +#define USB_SWITCH_TO_TYPEC 0
> +#define TYPEC_VBUS_POWER_ON 1
> +#define TYPEC_VBUS_POWER_OFF 0
> +
> +struct hisi_hikey_usb {
> +	struct gpio_desc *otg_switch;
> +	struct gpio_desc *typec_vbus;
> +	struct gpio_desc *hub_vbus;
> +
> +	struct usb_role_switch *role_sw;
> +	struct notifier_block nb;
> +};
> +
> +static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
> +}
> +
> +static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
> +		int switch_to)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
> +}
> +
> +static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
> +		int value)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
> +}
> +
> +static int hisi_hikey_role_switch(struct notifier_block *nb,
> +			unsigned long state, void *data)
> +{
> +	struct hisi_hikey_usb *hisi_hikey_usb;
> +
> +	hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
> +
> +	switch (state) {
> +	case USB_ROLE_NONE:
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
> +		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
> +		break;
> +	case USB_ROLE_HOST:
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON);
> +		break;
> +	case USB_ROLE_DEVICE:
> +		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
> +		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *root = dev->of_node;
> +	struct hisi_hikey_usb *hisi_hikey_usb;
> +	int ret;
> +
> +	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
> +	if (!hisi_hikey_usb)
> +		return -ENOMEM;
> +
> +	hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
> +
> +	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> +			GPIOD_OUT_LOW);
> +	if (!hisi_hikey_usb->typec_vbus)
> +		return -ENOENT;
> +	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
> +		return PTR_ERR(hisi_hikey_usb->typec_vbus);
> +
> +	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch",
> +			GPIOD_OUT_HIGH);
> +	if (!hisi_hikey_usb->otg_switch)
> +		return -ENOENT;
> +	else if (IS_ERR(hisi_hikey_usb->otg_switch))
> +		return PTR_ERR(hisi_hikey_usb->otg_switch);
> +
> +	/* hub-vdd33-en is optional */
> +	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
> +			GPIOD_OUT_HIGH);
> +	if (IS_ERR(hisi_hikey_usb->hub_vbus))
> +		return PTR_ERR(hisi_hikey_usb->hub_vbus);
> +
> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> +	if (!hisi_hikey_usb->role_sw)
> +		return -EPROBE_DEFER;
Here return EPROBE_DEFFER means the related device_connection is
registered after this probe is called, right?
if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
> +		return PTR_ERR(hisi_hikey_usb->role_sw);
> +
> +	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
> +			&hisi_hikey_usb->nb);
> +	if (ret) {
> +		usb_role_switch_put(hisi_hikey_usb->role_sw);
> +		return ret;
> +	}
> +
> +	platform_set_drvdata(pdev, hisi_hikey_usb);
> +
> +	return 0;
> +}
> +
> +static int  hisi_hikey_usb_remove(struct platform_device *pdev)
> +{
> +	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
> +
> +	usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
> +			&hisi_hikey_usb->nb);
> +
> +	usb_role_switch_put(hisi_hikey_usb->role_sw);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
> +	{.compatible = "hisilicon,gpio_hubv1"},
> +	{.compatible = "hisilicon,hikey960_usb"},
> +	{}
> +};
> +
> +static struct platform_driver hisi_hikey_usb_driver = {
> +	.probe = hisi_hikey_usb_probe,
> +	.remove = hisi_hikey_usb_remove,
> +	.driver = {
> +		.name = DEVICE_DRIVER_NAME,
> +		.of_match_table = id_table_hisi_hikey_usb,
> +	},
> +};
> +
> +module_platform_driver(hisi_hikey_usb_driver);
> +
> +MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
> +MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
> +MODULE_LICENSE("GPL v2");

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chen Yu]

Hi Chunfeng Yun,

On 2019/3/4 9:47, Chunfeng Yun wrote:

>> +
>> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
>> +	if (!hisi_hikey_usb->role_sw)
>> +		return -EPROBE_DEFER;
> Here return EPROBE_DEFFER means the related device_connection is
> registered after this probe is called, right?
> if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
Yes, the driver which register the usb_role_switch may finish probe after
this driver is probed for the first time.
>> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
>> +		return PTR_ERR(hisi_hikey_usb->role_sw);
>> +
>> +	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
>> +			&hisi_hikey_usb->nb);
>> +	if (ret) {
>> +		usb_role_switch_put(hisi_hikey_usb->role_sw);
>> +		return ret;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, hisi_hikey_usb);
>> +
>> +	return 0;
>> +}
>> +

> 
> 
> .
> 

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Yu Chen]

Hi Chunfeng Yun,

On 2019/3/4 9:47, Chunfeng Yun wrote:

>> +
>> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
>> +	if (!hisi_hikey_usb->role_sw)
>> +		return -EPROBE_DEFER;
> Here return EPROBE_DEFFER means the related device_connection is
> registered after this probe is called, right?
> if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
Yes, the driver which register the usb_role_switch may finish probe after
this driver is probed for the first time.
>> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
>> +		return PTR_ERR(hisi_hikey_usb->role_sw);
>> +
>> +	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
>> +			&hisi_hikey_usb->nb);
>> +	if (ret) {
>> +		usb_role_switch_put(hisi_hikey_usb->role_sw);
>> +		return ret;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, hisi_hikey_usb);
>> +
>> +	return 0;
>> +}
>> +

> 
> 
> .
>

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chen Yu]

Hi Chunfeng Yun,

On 2019/3/4 9:47, Chunfeng Yun wrote:

>> +
>> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
>> +	if (!hisi_hikey_usb->role_sw)
>> +		return -EPROBE_DEFER;
> Here return EPROBE_DEFFER means the related device_connection is
> registered after this probe is called, right?
> if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
Yes, the driver which register the usb_role_switch may finish probe after
this driver is probed for the first time.
>> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
>> +		return PTR_ERR(hisi_hikey_usb->role_sw);
>> +
>> +	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
>> +			&hisi_hikey_usb->nb);
>> +	if (ret) {
>> +		usb_role_switch_put(hisi_hikey_usb->role_sw);
>> +		return ret;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, hisi_hikey_usb);
>> +
>> +	return 0;
>> +}
>> +

> 
> 
> .
> 

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Andy Shevchenko]

On Mon, Mar 4, 2019 at 3:47 AM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
> On Sat, 2019-03-02 at 17:05 +0800, Yu Chen wrote:

> > +     hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> > +     if (!hisi_hikey_usb->role_sw)
> > +             return -EPROBE_DEFER;
> Here return EPROBE_DEFFER means the related device_connection is
> registered after this probe is called, right?
> if not, use IS_ERR_OR_NULL then return PTR_ERR is enough

How enough? If return value is NULL it would be transformered to 0,
which is success return code from the ->probe() which means we will
have ->probed() and not functional device.

Am I missing something?

-- 
With Best Regards,
Andy Shevchenko

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Andy Shevchenko]

On Mon, Mar 4, 2019 at 3:47 AM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
> On Sat, 2019-03-02 at 17:05 +0800, Yu Chen wrote:

> > +     hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> > +     if (!hisi_hikey_usb->role_sw)
> > +             return -EPROBE_DEFER;
> Here return EPROBE_DEFFER means the related device_connection is
> registered after this probe is called, right?
> if not, use IS_ERR_OR_NULL then return PTR_ERR is enough

How enough? If return value is NULL it would be transformered to 0,
which is success return code from the ->probe() which means we will
have ->probed() and not functional device.

Am I missing something?

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chunfeng Yun]

hi,

On Mon, 2019-03-04 at 08:50 +0200, Andy Shevchenko wrote:
> On Mon, Mar 4, 2019 at 3:47 AM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
> > On Sat, 2019-03-02 at 17:05 +0800, Yu Chen wrote:
> 
> > > +     hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> > > +     if (!hisi_hikey_usb->role_sw)
> > > +             return -EPROBE_DEFER;
> > Here return EPROBE_DEFFER means the related device_connection is
> > registered after this probe is called, right?
> > if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
> 
> How enough? If return value is NULL it would be transformered to 0,
> which is success return code from the ->probe() which means we will
> have ->probed() and not functional device.
> 
You are right:)

> Am I missing something?
> 

[v3,10/12] hikey960: Support usb functionality of Hikey960

[Chunfeng Yun]

hi,

On Mon, 2019-03-04 at 08:50 +0200, Andy Shevchenko wrote:
> On Mon, Mar 4, 2019 at 3:47 AM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
> > On Sat, 2019-03-02 at 17:05 +0800, Yu Chen wrote:
> 
> > > +     hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> > > +     if (!hisi_hikey_usb->role_sw)
> > > +             return -EPROBE_DEFER;
> > Here return EPROBE_DEFFER means the related device_connection is
> > registered after this probe is called, right?
> > if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
> 
> How enough? If return value is NULL it would be transformered to 0,
> which is success return code from the ->probe() which means we will
> have ->probed() and not functional device.
> 
You are right:)

> Am I missing something?
>

Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960

[Chunfeng Yun]

hi,

On Mon, 2019-03-04 at 08:50 +0200, Andy Shevchenko wrote:
> On Mon, Mar 4, 2019 at 3:47 AM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
> > On Sat, 2019-03-02 at 17:05 +0800, Yu Chen wrote:
> 
> > > +     hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> > > +     if (!hisi_hikey_usb->role_sw)
> > > +             return -EPROBE_DEFER;
> > Here return EPROBE_DEFFER means the related device_connection is
> > registered after this probe is called, right?
> > if not, use IS_ERR_OR_NULL then return PTR_ERR is enough
> 
> How enough? If return value is NULL it would be transformered to 0,
> which is success return code from the ->probe() which means we will
> have ->probed() and not functional device.
> 
You are right:)

> Am I missing something?
> 

[PATCH v3 11/12] usb: gadget: Add configfs attribuite for controling match_existing_only

[Yu Chen]

Currently the "match_existing_only" of usb_gadget_driver in configfs is
set to one which is not flexible.
Dwc3 udc will be removed when usb core switch to host mode. This causes
failure of writing name of dwc3 udc to configfs's UDC attribuite.
To fix this we need to add a way to change the config of
"match_existing_only".
There are systems like Android do not support udev, so adding
"match_existing_only" attribute to allow configuration by user is cost little.
This patch adds a configfs attribuite for controling match_existing_only
which allow user to config "match_existing_only".

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/gadget/configfs.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 025129942894..be85104bfab9 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -291,6 +291,36 @@ static ssize_t gadget_dev_desc_UDC_store(struct config_item *item,
 	return ret;
 }
 
+static ssize_t gadget_driver_match_existing_only_store(struct config_item *item,
+		const char *page, size_t len)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+	struct usb_gadget_driver *gadget_driver = &(gi->composite.gadget_driver);
+	bool match_existing_only;
+	int ret;
+
+	ret = kstrtobool(page, &match_existing_only);
+	if (ret)
+		return ret;
+
+	if (match_existing_only)
+		gadget_driver->match_existing_only = 1;
+	else
+		gadget_driver->match_existing_only = 0;
+
+	return len;
+}
+
+static ssize_t gadget_driver_match_existing_only_show(struct config_item *item,
+		char *page)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+	struct usb_gadget_driver *gadget_driver = &(gi->composite.gadget_driver);
+	bool match_existing_only = !!gadget_driver->match_existing_only;
+
+	return sprintf(page, "%s\n", match_existing_only ? "true" : "false");
+}
+
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceClass);
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceSubClass);
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceProtocol);
@@ -300,6 +330,7 @@ CONFIGFS_ATTR(gadget_dev_desc_, idProduct);
 CONFIGFS_ATTR(gadget_dev_desc_, bcdDevice);
 CONFIGFS_ATTR(gadget_dev_desc_, bcdUSB);
 CONFIGFS_ATTR(gadget_dev_desc_, UDC);
+CONFIGFS_ATTR(gadget_, driver_match_existing_only);
 
 static struct configfs_attribute *gadget_root_attrs[] = {
 	&gadget_dev_desc_attr_bDeviceClass,
@@ -311,6 +342,7 @@ static struct configfs_attribute *gadget_root_attrs[] = {
 	&gadget_dev_desc_attr_bcdDevice,
 	&gadget_dev_desc_attr_bcdUSB,
 	&gadget_dev_desc_attr_UDC,
+	&gadget_attr_driver_match_existing_only,
 	NULL,
 };
 
-- 
2.15.0-rc2

[v3,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only

[Yu Chen]

Currently the "match_existing_only" of usb_gadget_driver in configfs is
set to one which is not flexible.
Dwc3 udc will be removed when usb core switch to host mode. This causes
failure of writing name of dwc3 udc to configfs's UDC attribuite.
To fix this we need to add a way to change the config of
"match_existing_only".
There are systems like Android do not support udev, so adding
"match_existing_only" attribute to allow configuration by user is cost little.
This patch adds a configfs attribuite for controling match_existing_only
which allow user to config "match_existing_only".

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/gadget/configfs.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 025129942894..be85104bfab9 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -291,6 +291,36 @@ static ssize_t gadget_dev_desc_UDC_store(struct config_item *item,
 	return ret;
 }
 
+static ssize_t gadget_driver_match_existing_only_store(struct config_item *item,
+		const char *page, size_t len)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+	struct usb_gadget_driver *gadget_driver = &(gi->composite.gadget_driver);
+	bool match_existing_only;
+	int ret;
+
+	ret = kstrtobool(page, &match_existing_only);
+	if (ret)
+		return ret;
+
+	if (match_existing_only)
+		gadget_driver->match_existing_only = 1;
+	else
+		gadget_driver->match_existing_only = 0;
+
+	return len;
+}
+
+static ssize_t gadget_driver_match_existing_only_show(struct config_item *item,
+		char *page)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+	struct usb_gadget_driver *gadget_driver = &(gi->composite.gadget_driver);
+	bool match_existing_only = !!gadget_driver->match_existing_only;
+
+	return sprintf(page, "%s\n", match_existing_only ? "true" : "false");
+}
+
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceClass);
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceSubClass);
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceProtocol);
@@ -300,6 +330,7 @@ CONFIGFS_ATTR(gadget_dev_desc_, idProduct);
 CONFIGFS_ATTR(gadget_dev_desc_, bcdDevice);
 CONFIGFS_ATTR(gadget_dev_desc_, bcdUSB);
 CONFIGFS_ATTR(gadget_dev_desc_, UDC);
+CONFIGFS_ATTR(gadget_, driver_match_existing_only);
 
 static struct configfs_attribute *gadget_root_attrs[] = {
 	&gadget_dev_desc_attr_bDeviceClass,
@@ -311,6 +342,7 @@ static struct configfs_attribute *gadget_root_attrs[] = {
 	&gadget_dev_desc_attr_bcdDevice,
 	&gadget_dev_desc_attr_bcdUSB,
 	&gadget_dev_desc_attr_UDC,
+	&gadget_attr_driver_match_existing_only,
 	NULL,
 };
 

[PATCH v3 11/12] usb: gadget: Add configfs attribuite for controling match_existing_only

[Yu Chen]

Currently the "match_existing_only" of usb_gadget_driver in configfs is
set to one which is not flexible.
Dwc3 udc will be removed when usb core switch to host mode. This causes
failure of writing name of dwc3 udc to configfs's UDC attribuite.
To fix this we need to add a way to change the config of
"match_existing_only".
There are systems like Android do not support udev, so adding
"match_existing_only" attribute to allow configuration by user is cost little.
This patch adds a configfs attribuite for controling match_existing_only
which allow user to config "match_existing_only".

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
 drivers/usb/gadget/configfs.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 025129942894..be85104bfab9 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -291,6 +291,36 @@ static ssize_t gadget_dev_desc_UDC_store(struct config_item *item,
 	return ret;
 }
 
+static ssize_t gadget_driver_match_existing_only_store(struct config_item *item,
+		const char *page, size_t len)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+	struct usb_gadget_driver *gadget_driver = &(gi->composite.gadget_driver);
+	bool match_existing_only;
+	int ret;
+
+	ret = kstrtobool(page, &match_existing_only);
+	if (ret)
+		return ret;
+
+	if (match_existing_only)
+		gadget_driver->match_existing_only = 1;
+	else
+		gadget_driver->match_existing_only = 0;
+
+	return len;
+}
+
+static ssize_t gadget_driver_match_existing_only_show(struct config_item *item,
+		char *page)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+	struct usb_gadget_driver *gadget_driver = &(gi->composite.gadget_driver);
+	bool match_existing_only = !!gadget_driver->match_existing_only;
+
+	return sprintf(page, "%s\n", match_existing_only ? "true" : "false");
+}
+
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceClass);
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceSubClass);
 CONFIGFS_ATTR(gadget_dev_desc_, bDeviceProtocol);
@@ -300,6 +330,7 @@ CONFIGFS_ATTR(gadget_dev_desc_, idProduct);
 CONFIGFS_ATTR(gadget_dev_desc_, bcdDevice);
 CONFIGFS_ATTR(gadget_dev_desc_, bcdUSB);
 CONFIGFS_ATTR(gadget_dev_desc_, UDC);
+CONFIGFS_ATTR(gadget_, driver_match_existing_only);
 
 static struct configfs_attribute *gadget_root_attrs[] = {
 	&gadget_dev_desc_attr_bDeviceClass,
@@ -311,6 +342,7 @@ static struct configfs_attribute *gadget_root_attrs[] = {
 	&gadget_dev_desc_attr_bcdDevice,
 	&gadget_dev_desc_attr_bcdUSB,
 	&gadget_dev_desc_attr_UDC,
+	&gadget_attr_driver_match_existing_only,
 	NULL,
 };
 
-- 
2.15.0-rc2

[PATCH v3 12/12] dts: hi3660: Add support for usb on Hikey960

[Yu Chen]

This patch adds support for usb on Hikey960.

Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Remove device_type property.
* Add property "usb-role-switch".
v3:
* Make node "usb_phy" a subnode of usb3_otg_bc register.
* Remove property "typec-vbus-enable-val" of hisi_hikey_usb.
---
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 53 ++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 74 +++++++++++++++++++++++
 2 files changed, 127 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 46435466f1ab..7900ca60092e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "HiKey960";
@@ -196,6 +197,26 @@
 			method = "smc";
 		};
 	};
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,hikey960_usb";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
+
 };
 
 /*
@@ -526,6 +547,38 @@
 &i2c1 {
 	status = "okay";
 
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "ok";
+		interrupt-parent = <&gpio27>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+		};
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+		};
+	};
+
 	adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 20ae40df61d5..bfda59a41570 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -355,6 +355,12 @@
 			#clock-cells = <1>;
 		};
 
+		pmctrl: pmctrl@fff31000 {
+			compatible = "hisilicon,hi3660-pmctrl", "syscon";
+			reg = <0x0 0xfff31000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pmuctrl: crg_ctrl@fff34000 {
 			compatible = "hisilicon,hi3660-pmuctrl", "syscon";
 			reg = <0x0 0xfff34000 0x0 0x1000>;
@@ -1134,5 +1140,73 @@
 				};
 			};
 		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usb-phy {
+				compatible = "hisilicon,hi3660-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
+				hisilicon,eye-diagram-param = <0x22466e4>;
+			};
+		};
+
+		usb3: hisi_dwc3 {
+			compatible = "hisilicon,hi3660-dwc3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+
+			assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			assigned-clock-rates = <229000000>;
+			resets = <&crg_rst 0x90 8>,
+				 <&crg_rst 0x90 7>,
+				 <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 5>;
+
+			dwc3: dwc3@ff100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff100000 0x0 0x100000>;
+				interrupts = <0 159 4>, <0 161 4>;
+				phys = <&usb_phy>;
+				phy-names = "usb3-phy";
+				dr_mode = "otg";
+				maximum-speed = "super-speed";
+				phy_type = "utmi";
+				snps,dis-del-phy-power-chg-quirk;
+				snps,lfps_filter_quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,tx_de_emphasis_quirk;
+				snps,tx_de_emphasis = <1>;
+				snps,dis_enblslpm_quirk;
+				snps,gctl-reset-quirk;
+				usb-role-switch;
+				role-switch-default-host;
+
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dwc3_role_switch: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rt1711h_ep>;
+					};
+
+					dwc3_role_switch_notify: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hikey_usb_ep>;
+					};
+				};
+			};
+		};
 	};
 };
-- 
2.15.0-rc2

[PATCH v3 12/12] dts: hi3660: Add support for usb on Hikey960

[Yu Chen]

This patch adds support for usb on Hikey960.

Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Remove device_type property.
* Add property "usb-role-switch".
v3:
* Make node "usb_phy" a subnode of usb3_otg_bc register.
* Remove property "typec-vbus-enable-val" of hisi_hikey_usb.
---
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 53 ++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 74 +++++++++++++++++++++++
 2 files changed, 127 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 46435466f1ab..7900ca60092e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "HiKey960";
@@ -196,6 +197,26 @@
 			method = "smc";
 		};
 	};
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,hikey960_usb";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
+
 };
 
 /*
@@ -526,6 +547,38 @@
 &i2c1 {
 	status = "okay";
 
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "ok";
+		interrupt-parent = <&gpio27>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+		};
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+		};
+	};
+
 	adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 20ae40df61d5..bfda59a41570 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -355,6 +355,12 @@
 			#clock-cells = <1>;
 		};
 
+		pmctrl: pmctrl@fff31000 {
+			compatible = "hisilicon,hi3660-pmctrl", "syscon";
+			reg = <0x0 0xfff31000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pmuctrl: crg_ctrl@fff34000 {
 			compatible = "hisilicon,hi3660-pmuctrl", "syscon";
 			reg = <0x0 0xfff34000 0x0 0x1000>;
@@ -1134,5 +1140,73 @@
 				};
 			};
 		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usb-phy {
+				compatible = "hisilicon,hi3660-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
+				hisilicon,eye-diagram-param = <0x22466e4>;
+			};
+		};
+
+		usb3: hisi_dwc3 {
+			compatible = "hisilicon,hi3660-dwc3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+
+			assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			assigned-clock-rates = <229000000>;
+			resets = <&crg_rst 0x90 8>,
+				 <&crg_rst 0x90 7>,
+				 <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 5>;
+
+			dwc3: dwc3@ff100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff100000 0x0 0x100000>;
+				interrupts = <0 159 4>, <0 161 4>;
+				phys = <&usb_phy>;
+				phy-names = "usb3-phy";
+				dr_mode = "otg";
+				maximum-speed = "super-speed";
+				phy_type = "utmi";
+				snps,dis-del-phy-power-chg-quirk;
+				snps,lfps_filter_quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,tx_de_emphasis_quirk;
+				snps,tx_de_emphasis = <1>;
+				snps,dis_enblslpm_quirk;
+				snps,gctl-reset-quirk;
+				usb-role-switch;
+				role-switch-default-host;
+
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dwc3_role_switch: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rt1711h_ep>;
+					};
+
+					dwc3_role_switch_notify: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hikey_usb_ep>;
+					};
+				};
+			};
+		};
 	};
 };
-- 
2.15.0-rc2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v3,12/12] dts: hi3660: Add support for usb on Hikey960

[Yu Chen]

This patch adds support for usb on Hikey960.

Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Remove device_type property.
* Add property "usb-role-switch".
v3:
* Make node "usb_phy" a subnode of usb3_otg_bc register.
* Remove property "typec-vbus-enable-val" of hisi_hikey_usb.
---
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 53 ++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 74 +++++++++++++++++++++++
 2 files changed, 127 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 46435466f1ab..7900ca60092e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "HiKey960";
@@ -196,6 +197,26 @@
 			method = "smc";
 		};
 	};
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,hikey960_usb";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
+
 };
 
 /*
@@ -526,6 +547,38 @@
 &i2c1 {
 	status = "okay";
 
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "ok";
+		interrupt-parent = <&gpio27>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+		};
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+		};
+	};
+
 	adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 20ae40df61d5..bfda59a41570 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -355,6 +355,12 @@
 			#clock-cells = <1>;
 		};
 
+		pmctrl: pmctrl@fff31000 {
+			compatible = "hisilicon,hi3660-pmctrl", "syscon";
+			reg = <0x0 0xfff31000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pmuctrl: crg_ctrl@fff34000 {
 			compatible = "hisilicon,hi3660-pmuctrl", "syscon";
 			reg = <0x0 0xfff34000 0x0 0x1000>;
@@ -1134,5 +1140,73 @@
 				};
 			};
 		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usb-phy {
+				compatible = "hisilicon,hi3660-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
+				hisilicon,eye-diagram-param = <0x22466e4>;
+			};
+		};
+
+		usb3: hisi_dwc3 {
+			compatible = "hisilicon,hi3660-dwc3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+
+			assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			assigned-clock-rates = <229000000>;
+			resets = <&crg_rst 0x90 8>,
+				 <&crg_rst 0x90 7>,
+				 <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 5>;
+
+			dwc3: dwc3@ff100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff100000 0x0 0x100000>;
+				interrupts = <0 159 4>, <0 161 4>;
+				phys = <&usb_phy>;
+				phy-names = "usb3-phy";
+				dr_mode = "otg";
+				maximum-speed = "super-speed";
+				phy_type = "utmi";
+				snps,dis-del-phy-power-chg-quirk;
+				snps,lfps_filter_quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,tx_de_emphasis_quirk;
+				snps,tx_de_emphasis = <1>;
+				snps,dis_enblslpm_quirk;
+				snps,gctl-reset-quirk;
+				usb-role-switch;
+				role-switch-default-host;
+
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dwc3_role_switch: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rt1711h_ep>;
+					};
+
+					dwc3_role_switch_notify: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hikey_usb_ep>;
+					};
+				};
+			};
+		};
 	};
 };

[PATCH v3 12/12] dts: hi3660: Add support for usb on Hikey960

[Yu Chen]

This patch adds support for usb on Hikey960.

Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Remove device_type property.
* Add property "usb-role-switch".
v3:
* Make node "usb_phy" a subnode of usb3_otg_bc register.
* Remove property "typec-vbus-enable-val" of hisi_hikey_usb.
---
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 53 ++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 74 +++++++++++++++++++++++
 2 files changed, 127 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 46435466f1ab..7900ca60092e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "HiKey960";
@@ -196,6 +197,26 @@
 			method = "smc";
 		};
 	};
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,hikey960_usb";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
+
 };
 
 /*
@@ -526,6 +547,38 @@
 &i2c1 {
 	status = "okay";
 
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "ok";
+		interrupt-parent = <&gpio27>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+		};
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+		};
+	};
+
 	adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 20ae40df61d5..bfda59a41570 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -355,6 +355,12 @@
 			#clock-cells = <1>;
 		};
 
+		pmctrl: pmctrl@fff31000 {
+			compatible = "hisilicon,hi3660-pmctrl", "syscon";
+			reg = <0x0 0xfff31000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pmuctrl: crg_ctrl@fff34000 {
 			compatible = "hisilicon,hi3660-pmuctrl", "syscon";
 			reg = <0x0 0xfff34000 0x0 0x1000>;
@@ -1134,5 +1140,73 @@
 				};
 			};
 		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usb-phy {
+				compatible = "hisilicon,hi3660-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
+				hisilicon,eye-diagram-param = <0x22466e4>;
+			};
+		};
+
+		usb3: hisi_dwc3 {
+			compatible = "hisilicon,hi3660-dwc3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+
+			assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			assigned-clock-rates = <229000000>;
+			resets = <&crg_rst 0x90 8>,
+				 <&crg_rst 0x90 7>,
+				 <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 5>;
+
+			dwc3: dwc3@ff100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff100000 0x0 0x100000>;
+				interrupts = <0 159 4>, <0 161 4>;
+				phys = <&usb_phy>;
+				phy-names = "usb3-phy";
+				dr_mode = "otg";
+				maximum-speed = "super-speed";
+				phy_type = "utmi";
+				snps,dis-del-phy-power-chg-quirk;
+				snps,lfps_filter_quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,tx_de_emphasis_quirk;
+				snps,tx_de_emphasis = <1>;
+				snps,dis_enblslpm_quirk;
+				snps,gctl-reset-quirk;
+				usb-role-switch;
+				role-switch-default-host;
+
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dwc3_role_switch: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rt1711h_ep>;
+					};
+
+					dwc3_role_switch_notify: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hikey_usb_ep>;
+					};
+				};
+			};
+		};
 	};
 };
-- 
2.15.0-rc2

Re: [PATCH v3 00/12] Add support for usb on Hikey960

[Valentin Schneider]

Hi,

On 02/03/2019 09:04, Yu Chen wrote:
> The patchset adds support for usb functionality of Hikey960, includes:
> - dwc3 driver for Hisilicon Kirin Soc hi3660
> - usb driver for HiKey960 board
> - some adjustment in dwc3, usb gadget and typec driver
> - dts for support usb of HiKey960
> 
> This patchset based on patchset https://lkml.org/lkml/2019/1/25/344
> of Heikki Krogerus
> 

Works fine on my board, thanks for keeping this up.

Tested-by: Valentin Schneider <valentin.schneider@arm.com>

> Yu Chen (12):
>   dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
>   dt-bindings: misc: Add bindings for HiSilicon usb hub and data role
>     switch functionality on HiKey960
>   usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc
>     Platform
>   usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
>   usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for
>     Hisilicon Kirin Soc
>   usb: dwc3: Increase timeout for CmdAct cleared by device controller
>   phy: Add usb phy support for hi3660 Soc of Hisilicon
>   usb: roles: Add usb role switch notifier.
>   usb: dwc3: Registering a role switch in the DRD code.
>   hikey960: Support usb functionality of Hikey960
>   usb: gadget: Add configfs attribuite for controling
>     match_existing_only
>   dts: hi3660: Add support for usb on Hikey960
> 
>  .../bindings/misc/hisilicon-hikey-usb.txt          |  52 +++++
>  .../devicetree/bindings/phy/phy-hi3660-usb3.txt    |  28 +++
>  MAINTAINERS                                        |   8 +
>  arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts  |  53 +++++
>  arch/arm64/boot/dts/hisilicon/hi3660.dtsi          |  74 +++++++
>  drivers/misc/Kconfig                               |   6 +
>  drivers/misc/Makefile                              |   1 +
>  drivers/misc/hisi_hikey_usb.c                      | 167 +++++++++++++++
>  drivers/phy/hisilicon/Kconfig                      |  10 +
>  drivers/phy/hisilicon/Makefile                     |   1 +
>  drivers/phy/hisilicon/phy-hi3660-usb3.c            | 232 +++++++++++++++++++++
>  drivers/usb/dwc3/Kconfig                           |   1 +
>  drivers/usb/dwc3/core.c                            |  43 ++++
>  drivers/usb/dwc3/core.h                            |  10 +
>  drivers/usb/dwc3/drd.c                             |  58 +++++-
>  drivers/usb/dwc3/dwc3-of-simple.c                  |   4 +-
>  drivers/usb/dwc3/gadget.c                          |   2 +-
>  drivers/usb/gadget/configfs.c                      |  32 +++
>  drivers/usb/roles/class.c                          |  20 +-
>  include/linux/usb/role.h                           |  46 ++++
>  20 files changed, 844 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>  create mode 100644 drivers/misc/hisi_hikey_usb.c
>  create mode 100644 drivers/phy/hisilicon/phy-hi3660-usb3.c
>