All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Jan Beulich" <JBeulich@suse.com>
To: Roger Pau Monne <roger.pau@citrix.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
	Wei Liu <wei.liu2@citrix.com>,
	xen-devel <xen-devel@lists.xenproject.org>
Subject: Re: [PATCH 2/4] x86/IRQ: bail early from irq_guest_eoi_timer_fn() when nothing is in flight
Date: Thu, 16 May 2019 06:02:15 -0600	[thread overview]
Message-ID: <5CDD5147020000780022F9F2@prv1-mh.provo.novell.com> (raw)
In-Reply-To: <20190516113728.wnjbezwtaq45ijfb@Air-de-Roger>

>>> On 16.05.19 at 13:37, <roger.pau@citrix.com> wrote:
> On Wed, May 08, 2019 at 06:46:51AM -0600, Jan Beulich wrote:
>> There's no point entering the loop in the function in this case. Instead
>> there still being something in flight _after_ the loop would be an
>> actual problem: No timer would be running anymore for issuing the EOI
>> eventually, and hence this IRQ (and possibly lower priority ones) would
>> be blocked, perhaps indefinitely.
>> 
>> Issue a warning instead and prefer breaking some (presumably
>> misbehaving) guest over stalling perhaps the entire system.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> 
>> --- a/xen/arch/x86/irq.c
>> +++ b/xen/arch/x86/irq.c
>> @@ -1115,7 +1115,7 @@ static void irq_guest_eoi_timer_fn(void
>>  
>>      action = (irq_guest_action_t *)desc->action;
>>  
>> -    if ( timer_is_active(&action->eoi_timer) )
>> +    if ( !action->in_flight || timer_is_active(&action->eoi_timer) )
>>          goto out;
>>  
>>      if ( action->ack_type != ACKTYPE_NONE )
>> @@ -1130,8 +1130,10 @@ static void irq_guest_eoi_timer_fn(void
>>          }
>>      }
>>  
>> -    if ( action->in_flight != 0 )
>> -        goto out;
>> +    if ( action->in_flight )
>> +        printk(XENLOG_G_WARNING
>> +               "IRQ%d: %d handlers still in flight at forced EOI\n",
>> +               desc->irq, action->in_flight);
> 
> AFAICT action->in_flight should contain the number of guests pirqs
> that have the pirq masked (pirq->masked == true), because in_flight is
> only increased by __do_IRQ_guest when the pirq is not already masked.
> At guest EOI (desc_guest_eoi) the in_flight count is also only
> decreased if the pirq is unmasked.
> 
> Hence I think this condition could be turned into an ASSERT, but I'm
> likely missing something.

I don't think you are. Going from if() straight to ASSERT() simply
seemed too harsh to me, the more in a subsystem where I could
easily have overlooked some corner case, due to how convoluted
some of the implementation is.

Jan



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

WARNING: multiple messages have this Message-ID (diff)
From: "Jan Beulich" <JBeulich@suse.com>
To: "Roger Pau Monne" <roger.pau@citrix.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
	Wei Liu <wei.liu2@citrix.com>,
	xen-devel <xen-devel@lists.xenproject.org>
Subject: Re: [Xen-devel] [PATCH 2/4] x86/IRQ: bail early from irq_guest_eoi_timer_fn() when nothing is in flight
Date: Thu, 16 May 2019 06:02:15 -0600	[thread overview]
Message-ID: <5CDD5147020000780022F9F2@prv1-mh.provo.novell.com> (raw)
Message-ID: <20190516120215.C7rHrY8I5cHAnqJZ_6NYV-w55zBYaBnjmnx1Sh7VTZ8@z> (raw)
In-Reply-To: <20190516113728.wnjbezwtaq45ijfb@Air-de-Roger>

>>> On 16.05.19 at 13:37, <roger.pau@citrix.com> wrote:
> On Wed, May 08, 2019 at 06:46:51AM -0600, Jan Beulich wrote:
>> There's no point entering the loop in the function in this case. Instead
>> there still being something in flight _after_ the loop would be an
>> actual problem: No timer would be running anymore for issuing the EOI
>> eventually, and hence this IRQ (and possibly lower priority ones) would
>> be blocked, perhaps indefinitely.
>> 
>> Issue a warning instead and prefer breaking some (presumably
>> misbehaving) guest over stalling perhaps the entire system.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> 
>> --- a/xen/arch/x86/irq.c
>> +++ b/xen/arch/x86/irq.c
>> @@ -1115,7 +1115,7 @@ static void irq_guest_eoi_timer_fn(void
>>  
>>      action = (irq_guest_action_t *)desc->action;
>>  
>> -    if ( timer_is_active(&action->eoi_timer) )
>> +    if ( !action->in_flight || timer_is_active(&action->eoi_timer) )
>>          goto out;
>>  
>>      if ( action->ack_type != ACKTYPE_NONE )
>> @@ -1130,8 +1130,10 @@ static void irq_guest_eoi_timer_fn(void
>>          }
>>      }
>>  
>> -    if ( action->in_flight != 0 )
>> -        goto out;
>> +    if ( action->in_flight )
>> +        printk(XENLOG_G_WARNING
>> +               "IRQ%d: %d handlers still in flight at forced EOI\n",
>> +               desc->irq, action->in_flight);
> 
> AFAICT action->in_flight should contain the number of guests pirqs
> that have the pirq masked (pirq->masked == true), because in_flight is
> only increased by __do_IRQ_guest when the pirq is not already masked.
> At guest EOI (desc_guest_eoi) the in_flight count is also only
> decreased if the pirq is unmasked.
> 
> Hence I think this condition could be turned into an ASSERT, but I'm
> likely missing something.

I don't think you are. Going from if() straight to ASSERT() simply
seemed too harsh to me, the more in a subsystem where I could
easily have overlooked some corner case, due to how convoluted
some of the implementation is.

Jan



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  reply	other threads:[~2019-05-16 12:02 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-08 12:39 [PATCH 0/4] x86: EOI timer corrections / improvements Jan Beulich
2019-05-08 12:39 ` [Xen-devel] " Jan Beulich
2019-05-08 12:46 ` [PATCH 1/4] x86/IRQ: don't keep EOI timer running without need Jan Beulich
2019-05-08 12:46   ` [Xen-devel] " Jan Beulich
2019-05-16 10:32   ` Roger Pau Monné
2019-05-16 10:32     ` [Xen-devel] " Roger Pau Monné
2019-05-16 10:50     ` Jan Beulich
2019-05-16 10:50       ` [Xen-devel] " Jan Beulich
2019-05-16 11:03       ` Roger Pau Monné
2019-05-16 11:03         ` [Xen-devel] " Roger Pau Monné
2019-06-05 17:04   ` Andrew Cooper
2019-06-06  8:08     ` Jan Beulich
2019-06-06  9:30       ` Andrew Cooper
2019-05-08 12:46 ` [PATCH 2/4] x86/IRQ: bail early from irq_guest_eoi_timer_fn() when nothing is in flight Jan Beulich
2019-05-08 12:46   ` [Xen-devel] " Jan Beulich
2019-05-16 11:37   ` Roger Pau Monné
2019-05-16 11:37     ` [Xen-devel] " Roger Pau Monné
2019-05-16 12:02     ` Jan Beulich [this message]
2019-05-16 12:02       ` Jan Beulich
2019-05-16 13:44       ` Roger Pau Monné
2019-05-16 13:44         ` [Xen-devel] " Roger Pau Monné
2019-06-05 17:15   ` Andrew Cooper
2019-06-06  8:17     ` Jan Beulich
2019-06-06 11:34       ` Andrew Cooper
2019-06-06 11:43         ` Jan Beulich
2019-06-06 11:45           ` Andrew Cooper
2019-05-08 12:47 ` [PATCH 3/4] x86/IRQ: relax locking in irq_guest_eoi_timer_fn() Jan Beulich
2019-05-08 12:47   ` [Xen-devel] " Jan Beulich
2019-05-16 13:48   ` Roger Pau Monné
2019-05-16 13:48     ` [Xen-devel] " Roger Pau Monné
2019-06-05 17:16   ` Andrew Cooper
2019-05-08 12:48 ` [PATCH 4/4] x86/IRQ: ACKTYPE_NONE cannot make it into irq_guest_eoi_timer_fn() Jan Beulich
2019-05-08 12:48   ` [Xen-devel] " Jan Beulich
2019-05-16 13:52   ` Roger Pau Monné
2019-05-16 13:52     ` [Xen-devel] " Roger Pau Monné
2019-05-16 14:48     ` Jan Beulich
2019-05-16 14:48       ` [Xen-devel] " Jan Beulich
2019-05-17  7:04     ` Jan Beulich
2019-05-17  7:04       ` [Xen-devel] " Jan Beulich
2019-06-05 17:18   ` Andrew Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5CDD5147020000780022F9F2@prv1-mh.provo.novell.com \
    --to=jbeulich@suse.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=roger.pau@citrix.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.