* toaster
@ 2017-02-21 17:33 Dr. Matthias Schöpfer
[not found] ` <305b0a23-5747-3301-2c93-5b44b236ebef@linux.intel.com>
0 siblings, 1 reply; 3+ messages in thread
From: Dr. Matthias Schöpfer @ 2017-02-21 17:33 UTC (permalink / raw)
To: yocto
Hello!
First of all, I have been working with yocto/oe for some time now and
enjoy and appreciate it very much!
I have a question regarding toaster in a "Production Instance" Setup. I
have tried to set toaster up on Ubuntu 16.04 following the
http://www.yoctoproject.org/docs/2.2/toaster-manual/toaster-manual.html
and ran into a bunch of problems. I have been able to resolve some, but
now I am at a point where I doubt that this setup can work at all, so
please correct me if I am wrong.
From the top of my head, these where the troubles I had:
* there were Issues using mariadb instead of mysql.
* the |mod-wsgi |that comes with Ubuntu 16.04 has a bug that does not
allow to concatenate python-path with colon, so Update to Version >=4.5
was needed
* The line ./bitbake/lib/toaster/manage.py checksettings will ask for
the path to the openembedded meta...
* I am not sure if TOASTER_CONF is used, at least, the toaterconf.json
and what I get on the webserver do not match.
* Finally, and this is the point where I doubt that this setup can work
at all as described: When trying to run a build, I get an Internal
Server Error, which boils down that $BUILDDIR is not set for environment
apache runs in. If I hardcode that, I get of course the error on the
signal, that permission is denied, because the runbuilds-service is run
as toaster user while apache runs as www-data user.
Therefore: Is anyone running toaster in this setup?! Should I abandon
this setup?
Thanks in advance!
Regards,
Matthias
i.A. Dr.-Ing. Matthias Schöpfer | ithinx GmbH | Software Engineer
Phone: +49 (221) 99589-332 | Fax: +49 (221) 99589-199
Address: ithinx GmbH | Butzweilerhof Allee 4 | 50829 Cologne | Germany
E-Mail: Matthias.Schoepfer@i-thinx.com | Website: www.i-thinx.com
Registered Office: Cologne | District court: Marburg | HRB 6749
Managing Director: Christian Faust
This e-mail may contain confidential and/or privileged information. if you are not the intended recipient (or have received this e-mail in error) please
notifiy the sender immediately and destroy this e-mail. Any unautohrized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
We like trees. Please consider the environment before printing this e-mail. Thank you.
^ permalink raw reply [flat|nested] 3+ messages in thread[parent not found: <305b0a23-5747-3301-2c93-5b44b236ebef@linux.intel.com>]
* Re: toaster [not found] ` <305b0a23-5747-3301-2c93-5b44b236ebef@linux.intel.com> @ 2017-03-13 6:26 ` Reyna, David 0 siblings, 0 replies; 3+ messages in thread From: Reyna, David @ 2017-03-13 6:26 UTC (permalink / raw) To: Matthias.Schoepfer; +Cc: yocto, toaster Hi Matthias, I am sorry I did not see your post sooner. The Toaster group generally follows the "toaster@yoctoproject.org" email list. We fully intend to support mariadb as a production level database, especially given its open source credentials, but we have not tried it yet. We understood that mariadb was supposed to be an exact drop-in replacement, but obvious your experience is different. Our experience was just with MySQL. I will try to gather advice from our various users to see if we can help you in the meantime. - David -------- Forwarded Message -------- Subject: [yocto] toaster Date: Tue, 21 Feb 2017 17:33:08 +0000 From: Dr. Matthias Schöpfer <Matthias.Schoepfer@i-thinx.com> To: yocto@yoctoproject.org <yocto@yoctoproject.org> Hello! First of all, I have been working with yocto/oe for some time now and enjoy and appreciate it very much! I have a question regarding toaster in a "Production Instance" Setup. I have tried to set toaster up on Ubuntu 16.04 following the http://www.yoctoproject.org/docs/2.2/toaster-manual/toaster-manual.html and ran into a bunch of problems. I have been able to resolve some, but now I am at a point where I doubt that this setup can work at all, so please correct me if I am wrong. From the top of my head, these where the troubles I had: * there were Issues using mariadb instead of mysql. * the |mod-wsgi |that comes with Ubuntu 16.04 has a bug that does not allow to concatenate python-path with colon, so Update to Version >=4.5 was needed * The line ./bitbake/lib/toaster/manage.py checksettings will ask for the path to the openembedded meta... * I am not sure if TOASTER_CONF is used, at least, the toaterconf.json and what I get on the webserver do not match. * Finally, and this is the point where I doubt that this setup can work at all as described: When trying to run a build, I get an Internal Server Error, which boils down that $BUILDDIR is not set for environment apache runs in. If I hardcode that, I get of course the error on the signal, that permission is denied, because the runbuilds-service is run as toaster user while apache runs as www-data user. Therefore: Is anyone running toaster in this setup?! Should I abandon this setup? Thanks in advance! Regards, Matthias i.A. Dr.-Ing. Matthias Schöpfer | ithinx GmbH | Software Engineer Phone: +49 (221) 99589-332 | Fax: +49 (221) 99589-199 Address: ithinx GmbH | Butzweilerhof Allee 4 | 50829 Cologne | Germany E-Mail: Matthias.Schoepfer@i-thinx.com | Website: www.i-thinx.com Registered Office: Cologne | District court: Marburg | HRB 6749 Managing Director: Christian Faust This e-mail may contain confidential and/or privileged information. if you are not the intended recipient (or have received this e-mail in error) please notifiy the sender immediately and destroy this e-mail. Any unautohrized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. We like trees. Please consider the environment before printing this e-mail. Thank you. -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [yocto] toaster @ 2017-03-13 6:26 ` Reyna, David 0 siblings, 0 replies; 3+ messages in thread From: Reyna, David @ 2017-03-13 6:26 UTC (permalink / raw) To: Matthias.Schoepfer; +Cc: yocto, Randy Witt, toaster Hi Matthias, I am sorry I did not see your post sooner. The Toaster group generally follows the "toaster@yoctoproject.org" email list. We fully intend to support mariadb as a production level database, especially given its open source credentials, but we have not tried it yet. We understood that mariadb was supposed to be an exact drop-in replacement, but obvious your experience is different. Our experience was just with MySQL. I will try to gather advice from our various users to see if we can help you in the meantime. - David -------- Forwarded Message -------- Subject: [yocto] toaster Date: Tue, 21 Feb 2017 17:33:08 +0000 From: Dr. Matthias Schöpfer <Matthias.Schoepfer@i-thinx.com> To: yocto@yoctoproject.org <yocto@yoctoproject.org> Hello! First of all, I have been working with yocto/oe for some time now and enjoy and appreciate it very much! I have a question regarding toaster in a "Production Instance" Setup. I have tried to set toaster up on Ubuntu 16.04 following the http://www.yoctoproject.org/docs/2.2/toaster-manual/toaster-manual.html and ran into a bunch of problems. I have been able to resolve some, but now I am at a point where I doubt that this setup can work at all, so please correct me if I am wrong. From the top of my head, these where the troubles I had: * there were Issues using mariadb instead of mysql. * the |mod-wsgi |that comes with Ubuntu 16.04 has a bug that does not allow to concatenate python-path with colon, so Update to Version >=4.5 was needed * The line ./bitbake/lib/toaster/manage.py checksettings will ask for the path to the openembedded meta... * I am not sure if TOASTER_CONF is used, at least, the toaterconf.json and what I get on the webserver do not match. * Finally, and this is the point where I doubt that this setup can work at all as described: When trying to run a build, I get an Internal Server Error, which boils down that $BUILDDIR is not set for environment apache runs in. If I hardcode that, I get of course the error on the signal, that permission is denied, because the runbuilds-service is run as toaster user while apache runs as www-data user. Therefore: Is anyone running toaster in this setup?! Should I abandon this setup? Thanks in advance! Regards, Matthias i.A. Dr.-Ing. Matthias Schöpfer | ithinx GmbH | Software Engineer Phone: +49 (221) 99589-332 | Fax: +49 (221) 99589-199 Address: ithinx GmbH | Butzweilerhof Allee 4 | 50829 Cologne | Germany E-Mail: Matthias.Schoepfer@i-thinx.com | Website: www.i-thinx.com Registered Office: Cologne | District court: Marburg | HRB 6749 Managing Director: Christian Faust This e-mail may contain confidential and/or privileged information. if you are not the intended recipient (or have received this e-mail in error) please notifiy the sender immediately and destroy this e-mail. Any unautohrized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. We like trees. Please consider the environment before printing this e-mail. Thank you. -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-03-13 6:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-21 17:33 toaster Dr. Matthias Schöpfer
[not found] ` <305b0a23-5747-3301-2c93-5b44b236ebef@linux.intel.com>
2017-03-13 6:26 ` toaster Reyna, David
2017-03-13 6:26 ` [yocto] toaster Reyna, David
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.