* [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-14 11:31 ` Hannes Reinecke
` (3 more replies)
2021-05-13 8:35 ` [PATCH v5 02/24] mpi3mr: base driver code Kashyap Desai
` (22 subsequent siblings)
23 siblings, 4 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash, bvanassche,
thenzl, hare, himanshu.madhani, hch
[-- Attachment #1: Type: text/plain, Size: 98181 bytes --]
This adds the Kconfig and mpi30 headers.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: sathya.prakash@broadcom.com
Cc: bvanassche@acm.org
Cc: thenzl@redhat.com
Cc: hare@suse.de
Cc: himanshu.madhani@oracle.com
Cc: hch@infradead.org
---
drivers/scsi/Kconfig | 1 +
drivers/scsi/Makefile | 1 +
drivers/scsi/mpi3mr/Kconfig | 7 +
drivers/scsi/mpi3mr/mpi/mpi30_api.h | 18 +
drivers/scsi/mpi3mr/mpi/mpi30_image.h | 220 +++++
drivers/scsi/mpi3mr/mpi/mpi30_init.h | 163 ++++
drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 1009 +++++++++++++++++++++
drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 486 ++++++++++
8 files changed, 1905 insertions(+)
create mode 100644 drivers/scsi/mpi3mr/Kconfig
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_api.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_image.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_init.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_transport.h
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 06b87c7f6bab..1f06811740a7 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -482,6 +482,7 @@ config SCSI_ARCMSR
source "drivers/scsi/esas2r/Kconfig"
source "drivers/scsi/megaraid/Kconfig.megaraid"
source "drivers/scsi/mpt3sas/Kconfig"
+source "drivers/scsi/mpi3mr/Kconfig"
source "drivers/scsi/smartpqi/Kconfig"
source "drivers/scsi/ufs/Kconfig"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index bc3882f5cc69..06f2d5fab899 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
+obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr/
obj-$(CONFIG_SCSI_UFSHCD) += ufs/
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
diff --git a/drivers/scsi/mpi3mr/Kconfig b/drivers/scsi/mpi3mr/Kconfig
new file mode 100644
index 000000000000..2d0568dd176a
--- /dev/null
+++ b/drivers/scsi/mpi3mr/Kconfig
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+config SCSI_MPI3MR
+ tristate "Broadcom MPI3 Storage Controller Device Driver"
+ depends on PCI && SCSI
+ help
+ This driver supports Broadcom's Unified MPI3 based Storage & RAID Controllers.
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
new file mode 100644
index 000000000000..48247c254953
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2019-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_api.h
+ * Description: Root header that include all other MPI 3.0 headers
+ * Developers need to only include this header to gain
+ * access to the full MPI3.0 API definitions.
+ * Creation Date: 04/15/2019
+ * Version: 03.00.00
+ */
+#ifndef MPI30_API_H
+#define MPI30_API_H 1
+#include "mpi30_transport.h"
+#include "mpi30_image.h"
+#include "mpi30_init.h"
+#include "mpi30_ioc.h"
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_image.h b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
new file mode 100644
index 000000000000..45e7510698cb
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
@@ -0,0 +1,220 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2018-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_image.h
+ * Description: Contains definitions for firmware and other component images.
+ * Creation Date: 04/02/2018
+ * Version: 03.00.00
+ */
+#ifndef MPI30_IMAGE_H
+#define MPI30_IMAGE_H 1
+struct _mpi3_comp_image_version {
+ __le16 build_num;
+ __le16 customer_id;
+ u8 phase_minor;
+ u8 phase_major;
+ u8 gen_minor;
+ u8 gen_major;
+};
+
+struct _mpi3_hash_exclusion_format {
+ __le32 offset;
+ __le32 size;
+};
+
+#define MPI3_IMAGE_HASH_EXCUSION_NUM (4)
+struct _mpi3_component_image_header {
+ __le32 signature0;
+ __le32 load_address;
+ __le32 data_size;
+ __le32 start_offset;
+ __le32 signature1;
+ __le32 flash_offset;
+ __le32 image_size;
+ __le32 version_string_offset;
+ __le32 build_date_string_offset;
+ __le32 build_time_string_offset;
+ __le32 environment_variable_offset;
+ __le32 application_specific;
+ __le32 signature2;
+ __le32 header_size;
+ __le32 crc;
+ __le32 flags;
+ __le32 secondary_flash_offset;
+ __le32 etp_offset;
+ __le32 etp_size;
+ union _mpi3_version_union rmc_interface_version;
+ union _mpi3_version_union etp_interface_version;
+ struct _mpi3_comp_image_version component_image_version;
+ struct _mpi3_hash_exclusion_format hash_exclusion[MPI3_IMAGE_HASH_EXCUSION_NUM];
+ __le32 next_image_header_offset;
+ union _mpi3_version_union security_version;
+ __le32 reserved84[31];
+};
+
+#define MPI3_IMAGE_HEADER_SIGNATURE0_MPI3 (0xeb00003e)
+#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_INVALID (0x00000000)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_FIRST_MUTABLE (0x20434d46)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_BSP (0x20505342)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_ROM_BIOS (0x534f4942)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_X64 (0x4d494948)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_ARM (0x41494948)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_CPLD (0x444c5043)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_PBLP (0x504c4250)
+#define MPI3_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546)
+#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_MASK (0x00000030)
+#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_CDI (0x00000000)
+#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_DI (0x00000010)
+#define MPI3_IMAGE_HEADER_FLAGS_SIGNED_NVDATA (0x00000008)
+#define MPI3_IMAGE_HEADER_FLAGS_REQUIRES_ACTIVATION (0x00000004)
+#define MPI3_IMAGE_HEADER_FLAGS_COMPRESSED (0x00000002)
+#define MPI3_IMAGE_HEADER_FLAGS_FLASH (0x00000001)
+#define MPI3_IMAGE_HEADER_SIGNATURE0_OFFSET (0x00)
+#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_OFFSET (0x04)
+#define MPI3_IMAGE_HEADER_DATA_SIZE_OFFSET (0x08)
+#define MPI3_IMAGE_HEADER_START_OFFSET_OFFSET (0x0c)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_OFFSET (0x10)
+#define MPI3_IMAGE_HEADER_FLASH_OFFSET_OFFSET (0x14)
+#define MPI3_IMAGE_HEADER_FLASH_SIZE_OFFSET (0x18)
+#define MPI3_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET (0x1c)
+#define MPI3_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET (0x20)
+#define MPI3_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET (0x24)
+#define MPI3_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET (0x28)
+#define MPI3_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET (0x2c)
+#define MPI3_IMAGE_HEADER_SIGNATURE2_OFFSET (0x30)
+#define MPI3_IMAGE_HEADER_HEADER_SIZE_OFFSET (0x34)
+#define MPI3_IMAGE_HEADER_CRC_OFFSET (0x38)
+#define MPI3_IMAGE_HEADER_FLAGS_OFFSET (0x3c)
+#define MPI3_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET (0x40)
+#define MPI3_IMAGE_HEADER_ETP_OFFSET_OFFSET (0x44)
+#define MPI3_IMAGE_HEADER_ETP_SIZE_OFFSET (0x48)
+#define MPI3_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET (0x4c)
+#define MPI3_IMAGE_HEADER_ETP_INTERFACE_VER_OFFSET (0x50)
+#define MPI3_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET (0x54)
+#define MPI3_IMAGE_HEADER_HASH_EXCLUSION_OFFSET (0x5c)
+#define MPI3_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET (0x7c)
+#define MPI3_IMAGE_HEADER_SIZE (0x100)
+struct _mpi3_extended_image_header {
+ u8 image_type;
+ u8 reserved01[3];
+ __le32 checksum;
+ __le32 image_size;
+ __le32 next_image_header_offset;
+ __le32 reserved10[4];
+ __le32 identify_string[8];
+};
+
+#define MPI3_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
+#define MPI3_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
+#define MPI3_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0c)
+#define MPI3_EXT_IMAGE_HEADER_SIZE (0x40)
+#define MPI3_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
+#define MPI3_EXT_IMAGE_TYPE_NVDATA (0x03)
+#define MPI3_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
+#define MPI3_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
+#define MPI3_EXT_IMAGE_TYPE_RDE (0x0a)
+#define MPI3_EXT_IMAGE_TYPE_AUXILIARY_PROCESSOR (0x0b)
+#define MPI3_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI3_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xff)
+struct _mpi3_supported_device {
+ __le16 device_id;
+ __le16 vendor_id;
+ __le16 device_id_mask;
+ __le16 reserved06;
+ u8 low_pci_rev;
+ u8 high_pci_rev;
+ __le16 reserved0a;
+ __le32 reserved0c;
+};
+
+#ifndef MPI3_SUPPORTED_DEVICE_MAX
+#define MPI3_SUPPORTED_DEVICE_MAX (1)
+#endif
+struct _mpi3_supported_devices_data {
+ u8 image_version;
+ u8 reserved01;
+ u8 num_devices;
+ u8 reserved03;
+ __le32 reserved04;
+ struct _mpi3_supported_device supported_device[MPI3_SUPPORTED_DEVICE_MAX];
+};
+
+#ifndef MPI3_ENCRYPTED_HASH_MAX
+#define MPI3_ENCRYPTED_HASH_MAX (1)
+#endif
+struct _mpi3_encrypted_hash_entry {
+ u8 hash_image_type;
+ u8 hash_algorithm;
+ u8 encryption_algorithm;
+ u8 reserved03;
+ __le32 reserved04;
+ __le32 encrypted_hash[MPI3_ENCRYPTED_HASH_MAX];
+};
+
+#define MPI3_HASH_IMAGE_TYPE_KEY_WITH_SIGNATURE (0x03)
+#define MPI3_HASH_ALGORITHM_VERSION_MASK (0xe0)
+#define MPI3_HASH_ALGORITHM_VERSION_NONE (0x00)
+#define MPI3_HASH_ALGORITHM_VERSION_SHA1 (0x20)
+#define MPI3_HASH_ALGORITHM_VERSION_SHA2 (0x40)
+#define MPI3_HASH_ALGORITHM_VERSION_SHA3 (0x60)
+#define MPI3_HASH_ALGORITHM_SIZE_MASK (0x1f)
+#define MPI3_HASH_ALGORITHM_SIZE_UNUSED (0x00)
+#define MPI3_HASH_ALGORITHM_SIZE_SHA256 (0x01)
+#define MPI3_HASH_ALGORITHM_SIZE_SHA512 (0x02)
+#define MPI3_ENCRYPTION_ALGORITHM_UNUSED (0x00)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA256 (0x01)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA512 (0x02)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA1024 (0x03)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA2048 (0x04)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA4096 (0x05)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA3072 (0x06)
+#ifndef MPI3_PUBLIC_KEY_MAX
+#define MPI3_PUBLIC_KEY_MAX (1)
+#endif
+struct _mpi3_encrypted_key_with_hash_entry {
+ u8 hash_image_type;
+ u8 hash_algorithm;
+ u8 encryption_algorithm;
+ u8 reserved03;
+ __le32 reserved04;
+ __le32 public_key[MPI3_PUBLIC_KEY_MAX];
+ __le32 encrypted_hash[MPI3_ENCRYPTED_HASH_MAX];
+};
+
+#ifndef MPI3_ENCRYPTED_HASH_ENTRY_MAX
+#define MPI3_ENCRYPTED_HASH_ENTRY_MAX (1)
+#endif
+struct _mpi3_encrypted_hash_data {
+ u8 image_version;
+ u8 num_hash;
+ __le16 reserved02;
+ __le32 reserved04;
+ struct _mpi3_encrypted_hash_entry encrypted_hash_entry[MPI3_ENCRYPTED_HASH_ENTRY_MAX];
+};
+
+#ifndef MPI3_AUX_PROC_DATA_MAX
+#define MPI3_AUX_PROC_DATA_MAX (1)
+#endif
+struct _mpi3_aux_processor_data {
+ u8 boot_method;
+ u8 num_load_addr;
+ u8 reserved02;
+ u8 type;
+ __le32 version;
+ __le32 load_address[8];
+ __le32 reserved28[22];
+ __le32 aux_processor_data[MPI3_AUX_PROC_DATA_MAX];
+};
+
+#define MPI3_AUX_PROC_DATA_OFFSET (0x80)
+#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_MSG (0x00)
+#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_DOORBELL (0x01)
+#define MPI3_AUXPROCESSOR_BOOT_METHOD_COMPONENT (0x02)
+#define MPI3_AUXPROCESSOR_TYPE_ARM_A15 (0x00)
+#define MPI3_AUXPROCESSOR_TYPE_ARM_M0 (0x01)
+#define MPI3_AUXPROCESSOR_TYPE_ARM_R4 (0x02)
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_init.h b/drivers/scsi/mpi3mr/mpi/mpi30_init.h
new file mode 100644
index 000000000000..dfd968681889
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_init.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_init.h
+ * Description: Contains definitions for SCSI initiator mode messages and structures.
+ * Creation Date: 10/27/2016
+ * Version: 03.00.00
+ */
+#ifndef MPI30_INIT_H
+#define MPI30_INIT_H 1
+struct _mpi3_scsi_io_cdb_eedp32 {
+ u8 cdb[20];
+ __be32 primary_reference_tag;
+ __le16 primary_application_tag;
+ __le16 primary_application_tag_mask;
+ __le32 transfer_length;
+};
+
+union _mpi3_scso_io_cdb_union {
+ u8 cdb32[32];
+ struct _mpi3_scsi_io_cdb_eedp32 eedp32;
+ struct _mpi3_sge_common sge;
+};
+
+struct _mpi3_scsi_io_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 dev_handle;
+ __le32 flags;
+ __le32 skip_count;
+ __le32 data_length;
+ u8 lun[8];
+ union _mpi3_scso_io_cdb_union cdb;
+ union _mpi3_sge_union sgl[4];
+};
+
+#define MPI3_SCSIIO_MSGFLAGS_METASGL_VALID (0x80)
+#define MPI3_SCSIIO_FLAGS_LARGE_CDB (0x60000000)
+#define MPI3_SCSIIO_FLAGS_CDB_16_OR_LESS (0x00000000)
+#define MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16 (0x20000000)
+#define MPI3_SCSIIO_FLAGS_CDB_IN_SEPARATE_BUFFER (0x40000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_MASK (0x07000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ (0x00000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_HEADOFQ (0x01000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ORDEREDQ (0x02000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ACAQ (0x04000000)
+#define MPI3_SCSIIO_FLAGS_CMDPRI_MASK (0x00f00000)
+#define MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT (20)
+#define MPI3_SCSIIO_FLAGS_DATADIRECTION_MASK (0x000c0000)
+#define MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER (0x00000000)
+#define MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE (0x00040000)
+#define MPI3_SCSIIO_FLAGS_DATADIRECTION_READ (0x00080000)
+#define MPI3_SCSIIO_FLAGS_DMAOPERATION_MASK (0x00030000)
+#define MPI3_SCSIIO_FLAGS_DMAOPERATION_HOST_PI (0x00010000)
+#define MPI3_SCSIIO_METASGL_INDEX (3)
+struct _mpi3_scsi_io_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ u8 scsi_status;
+ u8 scsi_state;
+ __le16 dev_handle;
+ __le32 transfer_count;
+ __le32 sense_count;
+ __le32 response_data;
+ __le16 task_tag;
+ __le16 scsi_status_qualifier;
+ __le32 eedp_error_offset;
+ __le16 eedp_observed_app_tag;
+ __le16 eedp_observed_guard;
+ __le32 eedp_observed_ref_tag;
+ __le64 sense_data_buffer_address;
+};
+
+#define MPI3_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
+#define MPI3_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x02)
+#define MPI3_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x04)
+#define MPI3_SCSI_STATUS_GOOD (0x00)
+#define MPI3_SCSI_STATUS_CHECK_CONDITION (0x02)
+#define MPI3_SCSI_STATUS_CONDITION_MET (0x04)
+#define MPI3_SCSI_STATUS_BUSY (0x08)
+#define MPI3_SCSI_STATUS_INTERMEDIATE (0x10)
+#define MPI3_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
+#define MPI3_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
+#define MPI3_SCSI_STATUS_COMMAND_TERMINATED (0x22)
+#define MPI3_SCSI_STATUS_TASK_SET_FULL (0x28)
+#define MPI3_SCSI_STATUS_ACA_ACTIVE (0x30)
+#define MPI3_SCSI_STATUS_TASK_ABORTED (0x40)
+#define MPI3_SCSI_STATE_SENSE_MASK (0x03)
+#define MPI3_SCSI_STATE_SENSE_VALID (0x00)
+#define MPI3_SCSI_STATE_SENSE_FAILED (0x01)
+#define MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY (0x02)
+#define MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE (0x03)
+#define MPI3_SCSI_STATE_NO_SCSI_STATUS (0x04)
+#define MPI3_SCSI_STATE_TERMINATED (0x08)
+#define MPI3_SCSI_STATE_RESPONSE_DATA_VALID (0x10)
+#define MPI3_SCSI_RSP_RESPONSECODE_MASK (0x000000ff)
+#define MPI3_SCSI_RSP_RESPONSECODE_SHIFT (0)
+#define MPI3_SCSI_RSP_ARI2_MASK (0x0000ff00)
+#define MPI3_SCSI_RSP_ARI2_SHIFT (8)
+#define MPI3_SCSI_RSP_ARI1_MASK (0x00ff0000)
+#define MPI3_SCSI_RSP_ARI1_SHIFT (16)
+#define MPI3_SCSI_RSP_ARI0_MASK (0xff000000)
+#define MPI3_SCSI_RSP_ARI0_SHIFT (24)
+#define MPI3_SCSI_TASKTAG_UNKNOWN (0xffff)
+struct _mpi3_scsi_task_mgmt_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 dev_handle;
+ __le16 task_host_tag;
+ u8 task_type;
+ u8 reserved0f;
+ __le16 task_request_queue_id;
+ __le16 reserved12;
+ __le32 reserved14;
+ u8 lun[8];
+};
+
+#define MPI3_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x08)
+#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
+#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK_SET (0x02)
+#define MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
+#define MPI3_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
+#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
+#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
+#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08)
+#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK_SET (0x09)
+#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_ASYNC_EVENT (0x0a)
+#define MPI3_SCSITASKMGMT_TASKTYPE_I_T_NEXUS_RESET (0x0b)
+struct _mpi3_scsi_task_mgmt_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ __le32 termination_count;
+ __le32 response_data;
+ __le32 reserved18;
+};
+
+#define MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC (0x80)
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
new file mode 100644
index 000000000000..2c62075cbbe1
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
@@ -0,0 +1,1009 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_ioc.h
+ * Description: Contains definitions for IOC messages such as IOC Init, IOC Facts, Port Enable,
+ * Events, FW Download, and FW Upload.
+ * Creation Date: 10/24/2016
+ * Version: 03.00.00
+ */
+#ifndef MPI30_IOC_H
+#define MPI30_IOC_H 1
+struct _mpi3_ioc_init_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ union _mpi3_version_union mpi_version;
+ __le64 time_stamp;
+ u8 reserved18;
+ u8 who_init;
+ __le16 reserved1a;
+ __le16 reply_free_queue_depth;
+ __le16 reserved1e;
+ __le64 reply_free_queue_address;
+ __le32 reserved28;
+ __le16 sense_buffer_free_queue_depth;
+ __le16 sense_buffer_length;
+ __le64 sense_buffer_free_queue_address;
+ __le64 driver_information_address;
+};
+
+#define MPI3_WHOINIT_NOT_INITIALIZED (0x00)
+#define MPI3_WHOINIT_ROM_BIOS (0x02)
+#define MPI3_WHOINIT_HOST_DRIVER (0x03)
+#define MPI3_WHOINIT_MANUFACTURER (0x04)
+struct _mpi3_driver_info_layout {
+ __le32 information_length;
+ u8 driver_signature[12];
+ u8 os_name[16];
+ u8 os_version[12];
+ u8 driver_name[20];
+ u8 driver_version[32];
+ u8 driver_release_date[20];
+ __le32 driver_capabilities;
+};
+
+struct _mpi3_ioc_facts_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ __le32 reserved0c;
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_ioc_facts_data {
+ __le16 ioc_facts_data_length;
+ __le16 reserved02;
+ union _mpi3_version_union mpi_version;
+ struct _mpi3_comp_image_version fw_version;
+ __le32 ioc_capabilities;
+ u8 ioc_number;
+ u8 who_init;
+ __le16 max_msix_vectors;
+ __le16 max_outstanding_request;
+ __le16 product_id;
+ __le16 ioc_request_frame_size;
+ __le16 reply_frame_size;
+ __le16 ioc_exceptions;
+ __le16 max_persistent_id;
+ u8 sge_modifier_mask;
+ u8 sge_modifier_value;
+ u8 sge_modifier_shift;
+ u8 protocol_flags;
+ __le16 max_sas_initiators;
+ __le16 max_sas_targets;
+ __le16 max_sas_expanders;
+ __le16 max_enclosures;
+ __le16 min_dev_handle;
+ __le16 max_dev_handle;
+ __le16 max_pc_ie_switches;
+ __le16 max_nvme;
+ __le16 max_pds;
+ __le16 max_vds;
+ __le16 max_host_pds;
+ __le16 max_advanced_host_pds;
+ __le16 max_raid_pds;
+ __le16 max_posted_cmd_buffers;
+ __le32 flags;
+ __le16 max_operational_request_queues;
+ __le16 max_operational_reply_queues;
+ __le16 shutdown_timeout;
+ __le16 reserved4e;
+ __le32 diag_trace_size;
+ __le32 diag_fw_size;
+};
+
+#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD (0x00000010)
+#define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE (0x00000008)
+#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_GRAN_MASK (0x00000001)
+#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_IOC_GRAN (0x00000000)
+#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_REPLY_Q_GRAN (0x00000001)
+#define MPI3_IOCFACTS_PID_TYPE_MASK (0xf000)
+#define MPI3_IOCFACTS_PID_TYPE_SHIFT (12)
+#define MPI3_IOCFACTS_PID_PRODUCT_MASK (0x0f00)
+#define MPI3_IOCFACTS_PID_PRODUCT_SHIFT (8)
+#define MPI3_IOCFACTS_PID_FAMILY_MASK (0x00ff)
+#define MPI3_IOCFACTS_PID_FAMILY_SHIFT (0)
+#define MPI3_IOCFACTS_EXCEPT_SAFE_MODE (0x0800)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_MASK (0x0700)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_NONE (0x0000)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_RAID (0x0100)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_OOB (0x0200)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_RAID (0x0300)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_OOB (0x0400)
+#define MPI3_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0080)
+#define MPI3_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0040)
+#define MPI3_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0020)
+#define MPI3_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0010)
+#define MPI3_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0008)
+#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x0001)
+#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_PRIMARY (0x0000)
+#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_SECONDARY (0x0001)
+#define MPI3_IOCFACTS_PROTOCOL_SAS (0x0010)
+#define MPI3_IOCFACTS_PROTOCOL_SATA (0x0008)
+#define MPI3_IOCFACTS_PROTOCOL_NVME (0x0004)
+#define MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
+#define MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
+#define MPI3_IOCFACTS_FLAGS_SIGNED_NVDATA_REQUIRED (0x00010000)
+#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK (0x0000ff00)
+#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT (8)
+#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK (0x00000030)
+#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_NOT_STARTED (0x00000000)
+#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_IN_PROGRESS (0x00000010)
+#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_COMPLETE (0x00000020)
+#define MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK (0x0000000f)
+#define MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA (0x00000000)
+#define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002)
+struct _mpi3_mgmt_passthrough_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ __le32 reserved0c[5];
+ union _mpi3_sge_union command_sgl;
+ union _mpi3_sge_union response_sgl;
+};
+
+struct _mpi3_create_request_queue_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 flags;
+ u8 burst;
+ __le16 size;
+ __le16 queue_id;
+ __le16 reply_queue_id;
+ __le16 reserved12;
+ __le32 reserved14;
+ __le64 base_address;
+};
+
+#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
+#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
+#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
+struct _mpi3_delete_request_queue_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 queue_id;
+};
+
+struct _mpi3_create_reply_queue_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 flags;
+ u8 reserved0b;
+ __le16 size;
+ __le16 queue_id;
+ __le16 msix_index;
+ __le16 reserved12;
+ __le32 reserved14;
+ __le64 base_address;
+};
+
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_MASK (0x01)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_DISABLE (0x00)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE (0x01)
+struct _mpi3_delete_reply_queue_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 queue_id;
+};
+
+struct _mpi3_port_enable_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+};
+
+#define MPI3_EVENT_LOG_DATA (0x01)
+#define MPI3_EVENT_CHANGE (0x02)
+#define MPI3_EVENT_GPIO_INTERRUPT (0x04)
+#define MPI3_EVENT_TEMP_THRESHOLD (0x05)
+#define MPI3_EVENT_CABLE_MGMT (0x06)
+#define MPI3_EVENT_DEVICE_ADDED (0x07)
+#define MPI3_EVENT_DEVICE_INFO_CHANGED (0x08)
+#define MPI3_EVENT_PREPARE_FOR_RESET (0x09)
+#define MPI3_EVENT_COMP_IMAGE_ACT_START (0x0a)
+#define MPI3_EVENT_ENCL_DEVICE_ADDED (0x0b)
+#define MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x0c)
+#define MPI3_EVENT_DEVICE_STATUS_CHANGE (0x0d)
+#define MPI3_EVENT_ENERGY_PACK_CHANGE (0x0e)
+#define MPI3_EVENT_SAS_DISCOVERY (0x11)
+#define MPI3_EVENT_SAS_BROADCAST_PRIMITIVE (0x12)
+#define MPI3_EVENT_SAS_NOTIFY_PRIMITIVE (0x13)
+#define MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x14)
+#define MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW (0x15)
+#define MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x16)
+#define MPI3_EVENT_SAS_PHY_COUNTER (0x18)
+#define MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x19)
+#define MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x20)
+#define MPI3_EVENT_PCIE_ENUMERATION (0x22)
+#define MPI3_EVENT_HARD_RESET_RECEIVED (0x40)
+#define MPI3_EVENT_MIN_PRODUCT_SPECIFIC (0x60)
+#define MPI3_EVENT_MAX_PRODUCT_SPECIFIC (0x7f)
+#define MPI3_EVENT_NOTIFY_EVENTMASK_WORDS (4)
+struct _mpi3_event_notification_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ __le16 sas_broadcast_primitive_masks;
+ __le16 sas_notify_primitive_masks;
+ __le32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS];
+};
+
+struct _mpi3_event_notification_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ u8 event_data_length;
+ u8 event;
+ __le16 ioc_change_count;
+ __le32 event_context;
+ __le32 event_data[1];
+};
+
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK (0x01)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED (0x01)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_NOT_REQUIRED (0x00)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_MASK (0x02)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_ORIGINAL (0x00)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_REPLAY (0x02)
+struct _mpi3_event_data_gpio_interrupt {
+ u8 gpio_num;
+ u8 reserved01[3];
+};
+
+struct _mpi3_event_data_temp_threshold {
+ __le16 status;
+ u8 sensor_num;
+ u8 reserved03;
+ __le16 current_temperature;
+ __le16 reserved06;
+ __le32 reserved08;
+ __le32 reserved0c;
+};
+
+#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD3_EXCEEDED (0x0008)
+#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD2_EXCEEDED (0x0004)
+#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD1_EXCEEDED (0x0002)
+#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD0_EXCEEDED (0x0001)
+struct _mpi3_event_data_cable_management {
+ __le32 active_cable_power_requirement;
+ u8 status;
+ u8 receptacle_id;
+ __le16 reserved06;
+};
+
+#define MPI3_EVENT_CABLE_MGMT_ACT_CABLE_PWR_INVALID (0xffffffff)
+#define MPI3_EVENT_CABLE_MGMT_STATUS_INSUFFICIENT_POWER (0x00)
+#define MPI3_EVENT_CABLE_MGMT_STATUS_PRESENT (0x01)
+#define MPI3_EVENT_CABLE_MGMT_STATUS_DEGRADED (0x02)
+struct _mpi3_event_ack_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ u8 event;
+ u8 reserved0d[3];
+ __le32 event_context;
+};
+
+struct _mpi3_event_data_prepare_for_reset {
+ u8 reason_code;
+ u8 reserved01;
+ __le16 reserved02;
+};
+
+#define MPI3_EVENT_PREPARE_RESET_RC_START (0x01)
+#define MPI3_EVENT_PREPARE_RESET_RC_ABORT (0x02)
+struct _mpi3_event_data_comp_image_activation {
+ __le32 reserved00;
+};
+
+struct _mpi3_event_data_device_status_change {
+ __le16 task_tag;
+ u8 reason_code;
+ u8 io_unit_port;
+ __le16 parent_dev_handle;
+ __le16 dev_handle;
+ __le64 wwid;
+ u8 lun[8];
+};
+
+#define MPI3_EVENT_DEV_STAT_RC_MOVED (0x01)
+#define MPI3_EVENT_DEV_STAT_RC_HIDDEN (0x02)
+#define MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN (0x03)
+#define MPI3_EVENT_DEV_STAT_RC_ASYNC_NOTIFICATION (0x04)
+#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT (0x20)
+#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP (0x21)
+#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_STRT (0x22)
+#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_CMP (0x23)
+#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT (0x24)
+#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP (0x25)
+#define MPI3_EVENT_DEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x30)
+#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_STRT (0x40)
+#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_CMP (0x41)
+#define MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING (0x50)
+struct _mpi3_event_data_energy_pack_change {
+ __le32 reserved00;
+ __le16 shutdown_timeout;
+ __le16 reserved06;
+};
+
+struct _mpi3_event_data_sas_discovery {
+ u8 flags;
+ u8 reason_code;
+ u8 io_unit_port;
+ u8 reserved03;
+ __le32 discovery_status;
+};
+
+#define MPI3_EVENT_SAS_DISC_FLAGS_DEVICE_CHANGE (0x02)
+#define MPI3_EVENT_SAS_DISC_FLAGS_IN_PROGRESS (0x01)
+#define MPI3_EVENT_SAS_DISC_RC_STARTED (0x01)
+#define MPI3_EVENT_SAS_DISC_RC_COMPLETED (0x02)
+#define MPI3_SAS_DISC_STATUS_MAX_ENCLOSURES_EXCEED (0x80000000)
+#define MPI3_SAS_DISC_STATUS_MAX_EXPANDERS_EXCEED (0x40000000)
+#define MPI3_SAS_DISC_STATUS_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI3_SAS_DISC_STATUS_MAX_TOPO_PHYS_EXCEED (0x10000000)
+#define MPI3_SAS_DISC_STATUS_MULTIPLE_DEVICES_IN_SLOT (0x00004000)
+#define MPI3_SAS_DISC_STATUS_SLOT_COUNT_MISMATCH (0x00002000)
+#define MPI3_SAS_DISC_STATUS_TOO_MANY_SLOTS (0x00001000)
+#define MPI3_SAS_DISC_STATUS_EXP_MULTI_SUBTRACTIVE (0x00000800)
+#define MPI3_SAS_DISC_STATUS_MULTI_PORT_DOMAIN (0x00000400)
+#define MPI3_SAS_DISC_STATUS_TABLE_TO_SUBTRACTIVE_LINK (0x00000200)
+#define MPI3_SAS_DISC_STATUS_UNSUPPORTED_DEVICE (0x00000100)
+#define MPI3_SAS_DISC_STATUS_TABLE_LINK (0x00000080)
+#define MPI3_SAS_DISC_STATUS_SUBTRACTIVE_LINK (0x00000040)
+#define MPI3_SAS_DISC_STATUS_SMP_CRC_ERROR (0x00000020)
+#define MPI3_SAS_DISC_STATUS_SMP_FUNCTION_FAILED (0x00000010)
+#define MPI3_SAS_DISC_STATUS_SMP_TIMEOUT (0x00000008)
+#define MPI3_SAS_DISC_STATUS_MULTIPLE_PORTS (0x00000004)
+#define MPI3_SAS_DISC_STATUS_INVALID_SAS_ADDRESS (0x00000002)
+#define MPI3_SAS_DISC_STATUS_LOOP_DETECTED (0x00000001)
+struct _mpi3_event_data_sas_broadcast_primitive {
+ u8 phy_num;
+ u8 io_unit_port;
+ u8 port_width;
+ u8 primitive;
+};
+
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE (0x01)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_SES (0x02)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_EXPANDER (0x03)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED3 (0x05)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED4 (0x06)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE0_RESERVED (0x07)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE1_RESERVED (0x08)
+struct _mpi3_event_data_sas_notify_primitive {
+ u8 phy_num;
+ u8 io_unit_port;
+ u8 reserved02;
+ u8 primitive;
+};
+
+#define MPI3_EVENT_NOTIFY_PRIMITIVE_ENABLE_SPINUP (0x01)
+#define MPI3_EVENT_NOTIFY_PRIMITIVE_POWER_LOSS_EXPECTED (0x02)
+#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED1 (0x03)
+#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED2 (0x04)
+#ifndef MPI3_EVENT_SAS_TOPO_PHY_COUNT
+#define MPI3_EVENT_SAS_TOPO_PHY_COUNT (1)
+#endif
+struct _mpi3_event_sas_topo_phy_entry {
+ __le16 attached_dev_handle;
+ u8 link_rate;
+ u8 status;
+};
+
+#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xf0)
+#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
+#define MPI3_EVENT_SAS_TOPO_LR_PREV_MASK (0x0f)
+#define MPI3_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
+#define MPI3_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
+#define MPI3_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
+#define MPI3_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
+#define MPI3_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
+#define MPI3_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
+#define MPI3_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
+#define MPI3_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
+#define MPI3_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0a)
+#define MPI3_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0b)
+#define MPI3_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0c)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_MASK (0xc0)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_SHIFT (6)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_ACCESSIBLE (0x00)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_NO_EXIST (0x40)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_VACANT (0x80)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_MASK (0x0f)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING (0x02)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED (0x03)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE (0x04)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING (0x05)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING (0x06)
+struct _mpi3_event_data_sas_topology_change_list {
+ __le16 enclosure_handle;
+ __le16 expander_dev_handle;
+ u8 num_phys;
+ u8 reserved05[3];
+ u8 num_entries;
+ u8 start_phy_num;
+ u8 exp_status;
+ u8 io_unit_port;
+ struct _mpi3_event_sas_topo_phy_entry phy_entry[MPI3_EVENT_SAS_TOPO_PHY_COUNT];
+};
+
+#define MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
+#define MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
+#define MPI3_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
+#define MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
+struct _mpi3_event_data_sas_phy_counter {
+ __le64 time_stamp;
+ __le32 reserved08;
+ u8 phy_event_code;
+ u8 phy_num;
+ __le16 reserved0e;
+ __le32 phy_event_info;
+ u8 counter_type;
+ u8 threshold_window;
+ u8 time_units;
+ u8 reserved17;
+ __le32 event_threshold;
+ __le16 threshold_flags;
+ __le16 reserved1e;
+};
+
+struct _mpi3_event_data_sas_device_disc_err {
+ __le16 dev_handle;
+ u8 reason_code;
+ u8 io_unit_port;
+ __le32 reserved04;
+ __le64 sas_address;
+};
+
+#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_FAILED (0x01)
+#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_TIMEOUT (0x02)
+struct _mpi3_event_data_pcie_enumeration {
+ u8 flags;
+ u8 reason_code;
+ u8 io_unit_port;
+ u8 reserved03;
+ __le32 enumeration_status;
+};
+
+#define MPI3_EVENT_PCIE_ENUM_FLAGS_DEVICE_CHANGE (0x02)
+#define MPI3_EVENT_PCIE_ENUM_FLAGS_IN_PROGRESS (0x01)
+#define MPI3_EVENT_PCIE_ENUM_RC_STARTED (0x01)
+#define MPI3_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
+#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCH_DEPTH_EXCEED (0x80000000)
+#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
+#define MPI3_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI3_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
+#ifndef MPI3_EVENT_PCIE_TOPO_PORT_COUNT
+#define MPI3_EVENT_PCIE_TOPO_PORT_COUNT (1)
+#endif
+struct _mpi3_event_pcie_topo_port_entry {
+ __le16 attached_dev_handle;
+ u8 port_status;
+ u8 reserved03;
+ u8 current_port_info;
+ u8 reserved05;
+ u8 previous_port_info;
+ u8 reserved07;
+};
+
+#define MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
+#define MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
+#define MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
+#define MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
+#define MPI3_EVENT_PCIE_TOPO_PS_RESPONDING (0x06)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_MASK (0xf0)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_1 (0x10)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_2 (0x20)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_4 (0x30)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_8 (0x40)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_16 (0x50)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0f)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_32_0 (0x06)
+struct _mpi3_event_data_pcie_topology_change_list {
+ __le16 enclosure_handle;
+ __le16 switch_dev_handle;
+ u8 num_ports;
+ u8 reserved05[3];
+ u8 num_entries;
+ u8 start_port_num;
+ u8 switch_status;
+ u8 io_unit_port;
+ __le32 reserved0c;
+ struct _mpi3_event_pcie_topo_port_entry port_entry[MPI3_EVENT_PCIE_TOPO_PORT_COUNT];
+};
+
+#define MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
+#define MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
+#define MPI3_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
+#define MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
+struct _mpi3_event_data_sas_init_dev_status_change {
+ u8 reason_code;
+ u8 io_unit_port;
+ __le16 dev_handle;
+ __le32 reserved04;
+ __le64 sas_address;
+};
+
+#define MPI3_EVENT_SAS_INIT_RC_ADDED (0x01)
+#define MPI3_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
+struct _mpi3_event_data_sas_init_table_overflow {
+ __le16 max_init;
+ __le16 current_init;
+ __le32 reserved04;
+ __le64 sas_address;
+};
+
+struct _mpi3_event_data_hard_reset_received {
+ u8 reserved00;
+ u8 io_unit_port;
+ __le16 reserved02;
+};
+
+#define MPI3_PEL_LOCALE_FLAGS_NON_BLOCKING_BOOT_EVENT (0x0200)
+#define MPI3_PEL_LOCALE_FLAGS_BLOCKING_BOOT_EVENT (0x0100)
+#define MPI3_PEL_LOCALE_FLAGS_PCIE (0x0080)
+#define MPI3_PEL_LOCALE_FLAGS_CONFIGURATION (0x0040)
+#define MPI3_PEL_LOCALE_FLAGS_CONTROLER (0x0020)
+#define MPI3_PEL_LOCALE_FLAGS_SAS (0x0010)
+#define MPI3_PEL_LOCALE_FLAGS_EPACK (0x0008)
+#define MPI3_PEL_LOCALE_FLAGS_ENCLOSURE (0x0004)
+#define MPI3_PEL_LOCALE_FLAGS_PD (0x0002)
+#define MPI3_PEL_LOCALE_FLAGS_VD (0x0001)
+#define MPI3_PEL_CLASS_DEBUG (0x00)
+#define MPI3_PEL_CLASS_PROGRESS (0x01)
+#define MPI3_PEL_CLASS_INFORMATIONAL (0x02)
+#define MPI3_PEL_CLASS_WARNING (0x03)
+#define MPI3_PEL_CLASS_CRITICAL (0x04)
+#define MPI3_PEL_CLASS_FATAL (0x05)
+#define MPI3_PEL_CLASS_FAULT (0x06)
+#define MPI3_PEL_CLEARTYPE_CLEAR (0x00)
+#define MPI3_PEL_WAITTIME_INFINITE_WAIT (0x00)
+#define MPI3_PEL_ACTION_GET_SEQNUM (0x01)
+#define MPI3_PEL_ACTION_MARK_CLEAR (0x02)
+#define MPI3_PEL_ACTION_GET_LOG (0x03)
+#define MPI3_PEL_ACTION_GET_COUNT (0x04)
+#define MPI3_PEL_ACTION_WAIT (0x05)
+#define MPI3_PEL_ACTION_ABORT (0x06)
+#define MPI3_PEL_ACTION_GET_PRINT_STRINGS (0x07)
+#define MPI3_PEL_ACTION_ACKNOWLEDGE (0x08)
+#define MPI3_PEL_STATUS_SUCCESS (0x00)
+#define MPI3_PEL_STATUS_NOT_FOUND (0x01)
+#define MPI3_PEL_STATUS_ABORTED (0x02)
+#define MPI3_PEL_STATUS_NOT_READY (0x03)
+struct _mpi3_pel_seq {
+ __le32 newest;
+ __le32 oldest;
+ __le32 clear;
+ __le32 shutdown;
+ __le32 boot;
+ __le32 last_acknowledged;
+};
+
+struct _mpi3_pel_entry {
+ __le32 sequence_number;
+ __le32 time_stamp[2];
+ __le16 log_code;
+ __le16 arg_type;
+ __le16 locale;
+ u8 class;
+ u8 reserved13;
+ u8 ext_num;
+ u8 num_exts;
+ u8 arg_data_size;
+ u8 fixed_format_size;
+ __le32 reserved18[2];
+ __le32 pel_info[24];
+};
+
+struct _mpi3_pel_list {
+ __le32 log_count;
+ __le32 reserved04;
+ struct _mpi3_pel_entry entry[1];
+};
+
+struct _mpi3_pel_arg_map {
+ u8 arg_type;
+ u8 length;
+ __le16 start_location;
+};
+
+#define MPI3_PEL_ARG_MAP_ARG_TYPE_APPEND_STRING (0x00)
+#define MPI3_PEL_ARG_MAP_ARG_TYPE_INTEGER (0x01)
+#define MPI3_PEL_ARG_MAP_ARG_TYPE_STRING (0x02)
+#define MPI3_PEL_ARG_MAP_ARG_TYPE_BIT_FIELD (0x03)
+struct _mpi3_pel_print_string {
+ __le16 log_code;
+ __le16 string_length;
+ u8 num_arg_map;
+ u8 reserved05[3];
+ struct _mpi3_pel_arg_map arg_map[1];
+};
+
+struct _mpi3_pel_print_string_list {
+ __le32 num_print_strings;
+ __le32 residual_bytes_remain;
+ __le32 reserved08[2];
+ struct _mpi3_pel_print_string print_string[1];
+};
+
+#ifndef MPI3_PEL_ACTION_SPECIFIC_MAX
+#define MPI3_PEL_ACTION_SPECIFIC_MAX (1)
+#endif
+struct _mpi3_pel_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 action_specific[MPI3_PEL_ACTION_SPECIFIC_MAX];
+};
+
+struct _mpi3_pel_req_action_get_sequence_numbers {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 reserved0c[5];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_pel_req_action_clear_log_marker {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ u8 clear_type;
+ u8 reserved0d[3];
+};
+
+struct _mpi3_pel_req_action_get_log {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 starting_sequence_number;
+ __le16 locale;
+ u8 class;
+ u8 reserved13;
+ __le32 reserved14[3];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_pel_req_action_get_count {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 starting_sequence_number;
+ __le16 locale;
+ u8 class;
+ u8 reserved13;
+ __le32 reserved14[3];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_pel_req_action_wait {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 starting_sequence_number;
+ __le16 locale;
+ u8 class;
+ u8 reserved13;
+ __le16 wait_time;
+ __le16 reserved16;
+ __le32 reserved18[2];
+};
+
+struct _mpi3_pel_req_action_abort {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 reserved0c;
+ __le16 abort_host_tag;
+ __le16 reserved12;
+ __le32 reserved14;
+};
+
+struct _mpi3_pel_req_action_get_print_strings {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 reserved0c;
+ __le16 start_log_code;
+ __le16 reserved12;
+ __le32 reserved14[3];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_pel_req_action_acknowledge {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 sequence_number;
+ __le32 reserved10;
+};
+
+#define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT (0x01)
+struct _mpi3_pel_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ u8 action;
+ u8 reserved11;
+ __le16 reserved12;
+ __le16 pe_log_status;
+ __le16 reserved16;
+ __le32 transfer_length;
+};
+
+struct _mpi3_ci_download_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 signature1;
+ __le32 total_image_size;
+ __le32 image_offset;
+ __le32 segment_size;
+ __le32 reserved1c;
+ union _mpi3_sge_union sgl;
+};
+
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_LAST_SEGMENT (0x80)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_FORCE_FMC_ENABLE (0x40)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_SIGNED_NVDATA (0x20)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MASK (0x03)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_FAST (0x00)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MEDIUM (0x01)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_SLOW (0x02)
+#define MPI3_CI_DOWNLOAD_ACTION_DOWNLOAD (0x01)
+#define MPI3_CI_DOWNLOAD_ACTION_ONLINE_ACTIVATION (0x02)
+#define MPI3_CI_DOWNLOAD_ACTION_OFFLINE_ACTIVATION (0x03)
+#define MPI3_CI_DOWNLOAD_ACTION_GET_STATUS (0x04)
+struct _mpi3_ci_download_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ u8 flags;
+ u8 cache_dirty;
+ u8 pending_count;
+ u8 reserved13;
+};
+
+#define MPI3_CI_DOWNLOAD_FLAGS_DOWNLOAD_IN_PROGRESS (0x80)
+#define MPI3_CI_DOWNLOAD_FLAGS_KEY_UPDATE_PENDING (0x10)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_MASK (0x0e)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_NOT_NEEDED (0x00)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_AWAITING (0x02)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_ONLINE_PENDING (0x04)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_OFFLINE_PENDING (0x06)
+#define MPI3_CI_DOWNLOAD_FLAGS_COMPATIBLE (0x01)
+struct _mpi3_ci_upload_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ __le32 signature1;
+ __le32 reserved10;
+ __le32 image_offset;
+ __le32 segment_size;
+ __le32 reserved1c;
+ union _mpi3_sge_union sgl;
+};
+
+#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_MASK (0x01)
+#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY (0x00)
+#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_SECONDARY (0x01)
+#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_MASK (0x02)
+#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_FLASH (0x00)
+#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_EXECUTABLE (0x02)
+#define MPI3_CTRL_OP_FORCE_FULL_DISCOVERY (0x01)
+#define MPI3_CTRL_OP_LOOKUP_MAPPING (0x02)
+#define MPI3_CTRL_OP_UPDATE_TIMESTAMP (0x04)
+#define MPI3_CTRL_OP_GET_TIMESTAMP (0x05)
+#define MPI3_CTRL_OP_REMOVE_DEVICE (0x10)
+#define MPI3_CTRL_OP_CLOSE_PERSISTENT_CONNECTION (0x11)
+#define MPI3_CTRL_OP_HIDDEN_ACK (0x12)
+#define MPI3_CTRL_OP_SAS_SEND_PRIMITIVE (0x20)
+#define MPI3_CTRL_OP_SAS_CLEAR_ERROR_LOG (0x21)
+#define MPI3_CTRL_OP_PCIE_CLEAR_ERROR_LOG (0x22)
+#define MPI3_CTRL_OP_LOOKUP_MAPPING_PARAM8_LOOKUP_METHOD_INDEX (0x00)
+#define MPI3_CTRL_OP_UPDATE_TIMESTAMP_PARAM64_TIMESTAMP_INDEX (0x00)
+#define MPI3_CTRL_OP_REMOVE_DEVICE_PARAM16_DEVHANDLE_INDEX (0x00)
+#define MPI3_CTRL_OP_CLOSE_PERSIST_CONN_PARAM16_DEVHANDLE_INDEX (0x00)
+#define MPI3_CTRL_OP_HIDDEN_ACK_PARAM16_DEVHANDLE_INDEX (0x00)
+#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PHY_INDEX (0x00)
+#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PRIMSEQ_INDEX (0x01)
+#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM32_PRIMITIVE_INDEX (0x00)
+#define MPI3_CTRL_OP_SAS_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00)
+#define MPI3_CTRL_OP_PCIE_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00)
+#define MPI3_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
+#define MPI3_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
+#define MPI3_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
+#define MPI3_CTRL_LOOKUP_METHOD_PERSISTENT_ID (0x04)
+#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM16_DEVH_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM64_WWID_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM16_SLOTNUM_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM64_ENCLOSURELID_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM16_DEVH_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM64_DEVNAME_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_DEVH_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_PERSISTENT_ID_INDEX (1)
+#define MPI3_CTRL_LOOKUP_METHOD_VALUE16_DEVH_INDEX (0)
+#define MPI3_CTRL_GET_TIMESTAMP_VALUE64_TIMESTAMP_INDEX (0)
+#define MPI3_CTRL_PRIMFLAGS_SINGLE (0x01)
+#define MPI3_CTRL_PRIMFLAGS_TRIPLE (0x03)
+#define MPI3_CTRL_PRIMFLAGS_REDUNDANT (0x06)
+struct _mpi3_iounit_control_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 reserved0a;
+ u8 operation;
+ __le32 reserved0c;
+ __le64 param64[2];
+ __le32 param32[4];
+ __le16 param16[4];
+ u8 param8[8];
+};
+
+struct _mpi3_iounit_control_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ __le64 value64[2];
+ __le32 value32[4];
+ __le16 value16[4];
+ u8 value8[8];
+};
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
new file mode 100644
index 000000000000..d2a5e7e84b16
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
@@ -0,0 +1,486 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_transport.h
+ * Description: Contains definitions for System Interface Register Set, Scatter Gather Lists etc
+ * Creation Date: 08/31/2016
+ * Version: 03.00.00
+ *
+ * mpi3.h Version: 03.00.00.18
+ *
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- ----------- ------------------------------------------------------
+ * 11-30-18 03.00.00.08 Corresponds to Fusion-MPT MPI 3.0 Specification Rev H.
+ * 02-08-19 03.00.00.09 Corresponds to Fusion-MPT MPI 3.0 Specification Rev I.
+ * 05-03-19 03.00.00.10 Corresponds to Fusion-MPT MPI 3.0 Specification Rev J.
+ * 08-30-19 03.00.00.12 Corresponds to Fusion-MPT MPI 3.0 Specification Rev L.
+ * 11-01-19 03.00.00.13 Corresponds to Fusion-MPT MPI 3.0 Specification Rev M.
+ * 12-16-19 03.00.00.14 Corresponds to Fusion-MPT MPI 3.0 Specification Rev N.
+ * 02-28-20 03.00.00.15 Corresponds to Fusion-MPT MPI 3.0 Specification Rev O.
+ * 05-01-20 03.00.00.16 Corresponds to Fusion-MPT MPI 3.0 Specification Rev P.
+ * 06-26-20 03.00.00.17 Corresponds to Fusion-MPT MPI 3.0 Specification Rev Q.
+ * 08-28-20 03.00.00.18 Corresponds to Fusion-MPT MPI 3.0 Specification Rev R.
+ */
+#ifndef MPI30_TRANSPORT_H
+#define MPI30_TRANSPORT_H 1
+struct _mpi3_version_struct {
+ u8 dev;
+ u8 unit;
+ u8 minor;
+ u8 major;
+};
+
+union _mpi3_version_union {
+ struct _mpi3_version_struct mpi3_version;
+ __le32 word;
+};
+
+#define MPI3_VERSION_MAJOR (3)
+#define MPI3_VERSION_MINOR (0)
+#define MPI3_VERSION_UNIT (0)
+#define MPI3_VERSION_DEV (18)
+struct _mpi3_sysif_oper_queue_indexes {
+ __le16 producer_index;
+ __le16 reserved02;
+ __le16 consumer_index;
+ __le16 reserved06;
+};
+
+struct _mpi3_sysif_registers {
+ __le64 ioc_information;
+ union _mpi3_version_union version;
+ __le32 reserved0c[2];
+ __le32 ioc_configuration;
+ __le32 reserved18;
+ __le32 ioc_status;
+ __le32 reserved20;
+ __le32 admin_queue_num_entries;
+ __le64 admin_request_queue_address;
+ __le64 admin_reply_queue_address;
+ __le32 reserved38[2];
+ __le32 coalesce_control;
+ __le32 reserved44[1007];
+ __le16 admin_request_queue_pi;
+ __le16 reserved1002;
+ __le16 admin_reply_queue_ci;
+ __le16 reserved1006;
+ struct _mpi3_sysif_oper_queue_indexes oper_queue_indexes[383];
+ __le32 reserved1c00;
+ __le32 write_sequence;
+ __le32 host_diagnostic;
+ __le32 reserved1c0c;
+ __le32 fault;
+ __le32 fault_info[3];
+ __le32 reserved1c20[4];
+ __le64 hcb_address;
+ __le32 hcb_size;
+ __le32 reserved1c3c;
+ __le32 reply_free_host_index;
+ __le32 sense_buffer_free_host_index;
+ __le32 reserved1c48[2];
+ __le64 diag_rw_data;
+ __le64 diag_rw_address;
+ __le16 diag_rw_control;
+ __le16 diag_rw_status;
+ __le32 reserved1c64[35];
+ __le32 scratchpad[4];
+ __le32 reserved1d00[192];
+ __le32 device_assigned_registers[2048];
+};
+
+#define MPI3_SYSIF_IOC_INFO_LOW_OFFSET (0x00000000)
+#define MPI3_SYSIF_IOC_INFO_HIGH_OFFSET (0x00000004)
+#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK (0xff000000)
+#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT (24)
+#define MPI3_SYSIF_IOC_CONFIG_OFFSET (0x00000014)
+#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ (0x00f00000)
+#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT (20)
+#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ (0x000f0000)
+#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT (16)
+#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_MASK (0x0000c000)
+#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NO (0x00000000)
+#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL (0x00004000)
+#define MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN (0x00002000)
+#define MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE (0x00000010)
+#define MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC (0x00000001)
+#define MPI3_SYSIF_IOC_STATUS_OFFSET (0x0000001c)
+#define MPI3_SYSIF_IOC_STATUS_RESET_HISTORY (0x00000010)
+#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK (0x0000000c)
+#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_NONE (0x00000000)
+#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS (0x00000004)
+#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE (0x00000008)
+#define MPI3_SYSIF_IOC_STATUS_FAULT (0x00000002)
+#define MPI3_SYSIF_IOC_STATUS_READY (0x00000001)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_OFFSET (0x00000024)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REQ_MASK (0x0fff)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_OFFSET (0x00000026)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_MASK (0x0fff0000)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_SHIFT (16)
+#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_LOW_OFFSET (0x00000028)
+#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_HIGH_OFFSET (0x0000002c)
+#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_LOW_OFFSET (0x00000030)
+#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_HIGH_OFFSET (0x00000034)
+#define MPI3_SYSIF_COALESCE_CONTROL_OFFSET (0x00000040)
+#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_MASK (0xc0000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_NO_CHANGE (0x00000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_DISABLE (0x40000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_ENABLE (0xc0000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_VALID (0x30000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_MASK (0x00ff0000)
+#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_SHIFT (16)
+#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_MASK (0x0000ff00)
+#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_SHIFT (8)
+#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_MASK (0x000000ff)
+#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_SHIFT (0)
+#define MPI3_SYSIF_ADMIN_REQ_Q_PI_OFFSET (0x00001000)
+#define MPI3_SYSIF_ADMIN_REPLY_Q_CI_OFFSET (0x00001004)
+#define MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET (0x00001008)
+#define MPI3_SYSIF_OPER_REQ_Q_N_PI_OFFSET(n) (MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET + (((n) - 1) * 8))
+#define MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET (0x0000100c)
+#define MPI3_SYSIF_OPER_REPLY_Q_N_CI_OFFSET(n) (MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET + (((n) - 1) * 8))
+#define MPI3_SYSIF_WRITE_SEQUENCE_OFFSET (0x00001c04)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_MASK (0x0000000f)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH (0x0)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST (0xf)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND (0x4)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD (0xb)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH (0x2)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH (0x7)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH (0xd)
+#define MPI3_SYSIF_HOST_DIAG_OFFSET (0x00001c08)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_MASK (0x00000700)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_NO_RESET (0x00000000)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET (0x00000100)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_FLASH_RCVRY_RESET (0x00000200)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_COMPLETE_RESET (0x00000300)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT (0x00000700)
+#define MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS (0x00000080)
+#define MPI3_SYSIF_HOST_DIAG_SECURE_BOOT (0x00000040)
+#define MPI3_SYSIF_HOST_DIAG_CLEAR_INVALID_FW_IMAGE (0x00000020)
+#define MPI3_SYSIF_HOST_DIAG_INVALID_FW_IMAGE (0x00000010)
+#define MPI3_SYSIF_HOST_DIAG_HCBENABLE (0x00000008)
+#define MPI3_SYSIF_HOST_DIAG_HCBMODE (0x00000004)
+#define MPI3_SYSIF_HOST_DIAG_DIAG_RW_ENABLE (0x00000002)
+#define MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE (0x00000001)
+#define MPI3_SYSIF_FAULT_OFFSET (0x00001c10)
+#define MPI3_SYSIF_FAULT_FUNC_AREA_MASK (0xff000000)
+#define MPI3_SYSIF_FAULT_FUNC_AREA_SHIFT (24)
+#define MPI3_SYSIF_FAULT_FUNC_AREA_MPI_DEFINED (0x00000000)
+#define MPI3_SYSIF_FAULT_CODE_MASK (0x0000ffff)
+#define MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET (0x0000f000)
+#define MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET (0x0000f001)
+#define MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS (0x0000f002)
+#define MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED (0x0000f003)
+#define MPI3_SYSIF_FAULT_CODE_SAFE_MODE_EXIT (0x0000f004)
+#define MPI3_SYSIF_FAULT_CODE_FACTORY_RESET (0x0000f005)
+#define MPI3_SYSIF_FAULT_INFO0_OFFSET (0x00001c14)
+#define MPI3_SYSIF_FAULT_INFO1_OFFSET (0x00001c18)
+#define MPI3_SYSIF_FAULT_INFO2_OFFSET (0x00001c1c)
+#define MPI3_SYSIF_HCB_ADDRESS_LOW_OFFSET (0x00001c30)
+#define MPI3_SYSIF_HCB_ADDRESS_HIGH_OFFSET (0x00001c34)
+#define MPI3_SYSIF_HCB_SIZE_OFFSET (0x00001c38)
+#define MPI3_SYSIF_HCB_SIZE_SIZE_MASK (0xfffff000)
+#define MPI3_SYSIF_HCB_SIZE_SIZE_SHIFT (12)
+#define MPI3_SYSIF_HCB_SIZE_HCDW_ENABLE (0x00000001)
+#define MPI3_SYSIF_REPLY_FREE_HOST_INDEX_OFFSET (0x00001c40)
+#define MPI3_SYSIF_SENSE_BUF_FREE_HOST_INDEX_OFFSET (0x00001c44)
+#define MPI3_SYSIF_DIAG_RW_DATA_LOW_OFFSET (0x00001c50)
+#define MPI3_SYSIF_DIAG_RW_DATA_HIGH_OFFSET (0x00001c54)
+#define MPI3_SYSIF_DIAG_RW_ADDRESS_LOW_OFFSET (0x00001c58)
+#define MPI3_SYSIF_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00001c5c)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_OFFSET (0x00001c60)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_MASK (0x00000030)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_1BYTE (0x00000000)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_2BYTES (0x00000010)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_4BYTES (0x00000020)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_8BYTES (0x00000030)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_RESET (0x00000004)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_MASK (0x00000002)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_READ (0x00000000)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_WRITE (0x00000002)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_START (0x00000001)
+#define MPI3_SYSIF_DIAG_RW_STATUS_OFFSET (0x00001c62)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_MASK (0x0000000e)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_SUCCESS (0x00000000)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_INV_ADDR (0x00000002)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_ACC_ERR (0x00000004)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_PAR_ERR (0x00000006)
+#define MPI3_SYSIF_DIAG_RW_STATUS_BUSY (0x00000001)
+#define MPI3_SYSIF_SCRATCHPAD0_OFFSET (0x00001cf0)
+#define MPI3_SYSIF_SCRATCHPAD1_OFFSET (0x00001cf4)
+#define MPI3_SYSIF_SCRATCHPAD2_OFFSET (0x00001cf8)
+#define MPI3_SYSIF_SCRATCHPAD3_OFFSET (0x00001cfc)
+#define MPI3_SYSIF_DEVICE_ASSIGNED_REGS_OFFSET (0x00002000)
+#define MPI3_SYSIF_DIAG_SAVE_TIMEOUT (60)
+struct _mpi3_default_reply_descriptor {
+ __le32 descriptor_type_dependent1[2];
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 descriptor_type_dependent2;
+ __le16 reply_flags;
+};
+
+#define MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK (0x0001)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK (0xf000)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY (0x0000)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS (0x1000)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_TARGET_COMMAND_BUFFER (0x2000)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS (0x3000)
+struct _mpi3_address_reply_descriptor {
+ __le64 reply_frame_address;
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 reserved0c;
+ __le16 reply_flags;
+};
+
+struct _mpi3_success_reply_descriptor {
+ __le32 reserved00[2];
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 host_tag;
+ __le16 reply_flags;
+};
+
+struct _mpi3_target_command_buffer_reply_descriptor {
+ __le32 reserved00;
+ __le16 initiator_dev_handle;
+ u8 phy_num;
+ u8 reserved07;
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 io_index;
+ __le16 reply_flags;
+};
+
+struct _mpi3_status_reply_descriptor {
+ __le16 ioc_status;
+ __le16 reserved02;
+ __le32 ioc_log_info;
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 host_tag;
+ __le16 reply_flags;
+};
+
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL (0x8000)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK (0x7fff)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_MASK (0xf0000000)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_NO_INFO (0x00000000)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_SAS (0x30000000)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_DATA_MASK (0x0fffffff)
+union _mpi3_reply_descriptors_union {
+ struct _mpi3_default_reply_descriptor default_reply;
+ struct _mpi3_address_reply_descriptor address_reply;
+ struct _mpi3_success_reply_descriptor success;
+ struct _mpi3_target_command_buffer_reply_descriptor target_command_buffer;
+ struct _mpi3_status_reply_descriptor status;
+ __le32 words[4];
+};
+
+struct _mpi3_sge_common {
+ __le64 address;
+ __le32 length;
+ u8 reserved0c[3];
+ u8 flags;
+};
+
+struct _mpi3_sge_bit_bucket {
+ __le64 reserved00;
+ __le32 length;
+ u8 reserved0c[3];
+ u8 flags;
+};
+
+struct _mpi3_sge_extended_eedp {
+ u8 user_data_size;
+ u8 reserved01;
+ __le16 eedp_flags;
+ __le32 secondary_reference_tag;
+ __le16 secondary_application_tag;
+ __le16 application_tag_translation_mask;
+ __le16 reserved0c;
+ u8 extended_operation;
+ u8 flags;
+};
+
+union _mpi3_sge_union {
+ struct _mpi3_sge_common simple;
+ struct _mpi3_sge_common chain;
+ struct _mpi3_sge_common last_chain;
+ struct _mpi3_sge_bit_bucket bit_bucket;
+ struct _mpi3_sge_extended_eedp eedp;
+ __le32 words[4];
+};
+
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_MASK (0xf0)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE (0x00)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_BIT_BUCKET (0x10)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_CHAIN (0x20)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN (0x30)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED (0xf0)
+#define MPI3_SGE_FLAGS_END_OF_LIST (0x08)
+#define MPI3_SGE_FLAGS_END_OF_BUFFER (0x04)
+#define MPI3_SGE_FLAGS_DLAS_MASK (0x03)
+#define MPI3_SGE_FLAGS_DLAS_SYSTEM (0x00)
+#define MPI3_SGE_FLAGS_DLAS_IOC_DDR (0x01)
+#define MPI3_SGE_FLAGS_DLAS_IOC_CTL (0x02)
+#define MPI3_SGE_EXT_OPER_EEDP (0x00)
+#define MPI3_EEDPFLAGS_INCR_PRI_REF_TAG (0x8000)
+#define MPI3_EEDPFLAGS_INCR_SEC_REF_TAG (0x4000)
+#define MPI3_EEDPFLAGS_INCR_PRI_APP_TAG (0x2000)
+#define MPI3_EEDPFLAGS_INCR_SEC_APP_TAG (0x1000)
+#define MPI3_EEDPFLAGS_ESC_PASSTHROUGH (0x0800)
+#define MPI3_EEDPFLAGS_CHK_REF_TAG (0x0400)
+#define MPI3_EEDPFLAGS_CHK_APP_TAG (0x0200)
+#define MPI3_EEDPFLAGS_CHK_GUARD (0x0100)
+#define MPI3_EEDPFLAGS_ESC_MODE_MASK (0x00c0)
+#define MPI3_EEDPFLAGS_ESC_MODE_DO_NOT_DISABLE (0x0040)
+#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_DISABLE (0x0080)
+#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_REFTAG_DISABLE (0x00c0)
+#define MPI3_EEDPFLAGS_HOST_GUARD_MASK (0x0030)
+#define MPI3_EEDPFLAGS_HOST_GUARD_T10_CRC (0x0000)
+#define MPI3_EEDPFLAGS_HOST_GUARD_IP_CHKSUM (0x0010)
+#define MPI3_EEDPFLAGS_HOST_GUARD_OEM_SPECIFIC (0x0020)
+#define MPI3_EEDPFLAGS_PT_REF_TAG (0x0008)
+#define MPI3_EEDPFLAGS_EEDP_OP_MASK (0x0007)
+#define MPI3_EEDPFLAGS_EEDP_OP_NOOP (0x0000)
+#define MPI3_EEDPFLAGS_EEDP_OP_CHECK (0x0001)
+#define MPI3_EEDPFLAGS_EEDP_OP_STRIP (0x0002)
+#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REMOVE (0x0003)
+#define MPI3_EEDPFLAGS_EEDP_OP_INSERT (0x0004)
+#define MPI3_EEDPFLAGS_EEDP_OP_REPLACE (0x0006)
+#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REGEN (0x0007)
+#define MPI3_EEDP_UDS_512 (0x01)
+#define MPI3_EEDP_UDS_520 (0x02)
+#define MPI3_EEDP_UDS_4080 (0x03)
+#define MPI3_EEDP_UDS_4088 (0x04)
+#define MPI3_EEDP_UDS_4096 (0x05)
+#define MPI3_EEDP_UDS_4104 (0x06)
+#define MPI3_EEDP_UDS_4160 (0x07)
+struct _mpi3_request_header {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 function_dependent;
+};
+
+struct _mpi3_default_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+};
+
+#define MPI3_HOST_TAG_INVALID (0xffff)
+#define MPI3_FUNCTION_IOC_FACTS (0x01)
+#define MPI3_FUNCTION_IOC_INIT (0x02)
+#define MPI3_FUNCTION_PORT_ENABLE (0x03)
+#define MPI3_FUNCTION_EVENT_NOTIFICATION (0x04)
+#define MPI3_FUNCTION_EVENT_ACK (0x05)
+#define MPI3_FUNCTION_CI_DOWNLOAD (0x06)
+#define MPI3_FUNCTION_CI_UPLOAD (0x07)
+#define MPI3_FUNCTION_IO_UNIT_CONTROL (0x08)
+#define MPI3_FUNCTION_PERSISTENT_EVENT_LOG (0x09)
+#define MPI3_FUNCTION_MGMT_PASSTHROUGH (0x0a)
+#define MPI3_FUNCTION_CONFIG (0x10)
+#define MPI3_FUNCTION_SCSI_IO (0x20)
+#define MPI3_FUNCTION_SCSI_TASK_MGMT (0x21)
+#define MPI3_FUNCTION_SMP_PASSTHROUGH (0x22)
+#define MPI3_FUNCTION_NVME_ENCAPSULATED (0x24)
+#define MPI3_FUNCTION_TARGET_ASSIST (0x30)
+#define MPI3_FUNCTION_TARGET_STATUS_SEND (0x31)
+#define MPI3_FUNCTION_TARGET_MODE_ABORT (0x32)
+#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_BASE (0x33)
+#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_LIST (0x34)
+#define MPI3_FUNCTION_CREATE_REQUEST_QUEUE (0x70)
+#define MPI3_FUNCTION_DELETE_REQUEST_QUEUE (0x71)
+#define MPI3_FUNCTION_CREATE_REPLY_QUEUE (0x72)
+#define MPI3_FUNCTION_DELETE_REPLY_QUEUE (0x73)
+#define MPI3_FUNCTION_TOOLBOX (0x80)
+#define MPI3_FUNCTION_DIAG_BUFFER_POST (0x81)
+#define MPI3_FUNCTION_DIAG_BUFFER_MANAGE (0x82)
+#define MPI3_FUNCTION_DIAG_BUFFER_UPLOAD (0x83)
+#define MPI3_FUNCTION_MIN_IOC_USE_ONLY (0xc0)
+#define MPI3_FUNCTION_MAX_IOC_USE_ONLY (0xef)
+#define MPI3_FUNCTION_MIN_PRODUCT_SPECIFIC (0xf0)
+#define MPI3_FUNCTION_MAX_PRODUCT_SPECIFIC (0xff)
+#define MPI3_IOCSTATUS_LOG_INFO_AVAIL_MASK (0x8000)
+#define MPI3_IOCSTATUS_LOG_INFO_AVAILABLE (0x8000)
+#define MPI3_IOCSTATUS_STATUS_MASK (0x7fff)
+#define MPI3_IOCSTATUS_SUCCESS (0x0000)
+#define MPI3_IOCSTATUS_INVALID_FUNCTION (0x0001)
+#define MPI3_IOCSTATUS_BUSY (0x0002)
+#define MPI3_IOCSTATUS_INVALID_SGL (0x0003)
+#define MPI3_IOCSTATUS_INTERNAL_ERROR (0x0004)
+#define MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
+#define MPI3_IOCSTATUS_INVALID_FIELD (0x0007)
+#define MPI3_IOCSTATUS_INVALID_STATE (0x0008)
+#define MPI3_IOCSTATUS_INSUFFICIENT_POWER (0x000a)
+#define MPI3_IOCSTATUS_INVALID_CHANGE_COUNT (0x000b)
+#define MPI3_IOCSTATUS_FAILURE (0x001f)
+#define MPI3_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
+#define MPI3_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
+#define MPI3_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
+#define MPI3_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
+#define MPI3_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
+#define MPI3_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
+#define MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
+#define MPI3_IOCSTATUS_SCSI_TM_NOT_SUPPORTED (0x0041)
+#define MPI3_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
+#define MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
+#define MPI3_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
+#define MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
+#define MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
+#define MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
+#define MPI3_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
+#define MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
+#define MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004a)
+#define MPI3_IOCSTATUS_SCSI_IOC_TERMINATED (0x004b)
+#define MPI3_IOCSTATUS_SCSI_EXT_TERMINATED (0x004c)
+#define MPI3_IOCSTATUS_EEDP_GUARD_ERROR (0x004d)
+#define MPI3_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004e)
+#define MPI3_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004f)
+#define MPI3_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
+#define MPI3_IOCSTATUS_TARGET_ABORTED (0x0063)
+#define MPI3_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
+#define MPI3_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
+#define MPI3_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006a)
+#define MPI3_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006d)
+#define MPI3_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006e)
+#define MPI3_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006f)
+#define MPI3_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
+#define MPI3_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
+#define MPI3_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
+#define MPI3_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
+#define MPI3_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00a0)
+#define MPI3_IOCSTATUS_CI_UNSUPPORTED (0x00b0)
+#define MPI3_IOCSTATUS_CI_UPDATE_SEQUENCE (0x00b1)
+#define MPI3_IOCSTATUS_CI_VALIDATION_FAILED (0x00b2)
+#define MPI3_IOCSTATUS_CI_UPDATE_PENDING (0x00b3)
+#define MPI3_IOCSTATUS_SECURITY_KEY_REQUIRED (0x00c0)
+#define MPI3_IOCSTATUS_INVALID_QUEUE_ID (0x0f00)
+#define MPI3_IOCSTATUS_INVALID_QUEUE_SIZE (0x0f01)
+#define MPI3_IOCSTATUS_INVALID_MSIX_VECTOR (0x0f02)
+#define MPI3_IOCSTATUS_INVALID_REPLY_QUEUE_ID (0x0f03)
+#define MPI3_IOCSTATUS_INVALID_QUEUE_DELETION (0x0f04)
+#define MPI3_IOCLOGINFO_TYPE_MASK (0xf0000000)
+#define MPI3_IOCLOGINFO_TYPE_SHIFT (28)
+#define MPI3_IOCLOGINFO_TYPE_NONE (0x0)
+#define MPI3_IOCLOGINFO_TYPE_SAS (0x3)
+#define MPI3_IOCLOGINFO_LOG_DATA_MASK (0x0fffffff)
+#endif
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* Re: [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig
2021-05-13 8:35 ` [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig Kashyap Desai
@ 2021-05-14 11:31 ` Hannes Reinecke
2021-05-14 14:39 ` Tomas Henzl
` (2 subsequent siblings)
3 siblings, 0 replies; 38+ messages in thread
From: Hannes Reinecke @ 2021-05-14 11:31 UTC (permalink / raw)
To: Kashyap Desai, linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash, bvanassche, thenzl,
himanshu.madhani, hch
On 5/13/21 10:35 AM, Kashyap Desai wrote:
> This adds the Kconfig and mpi30 headers.
>
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
>
> Cc: sathya.prakash@broadcom.com
> Cc: bvanassche@acm.org
> Cc: thenzl@redhat.com
> Cc: hare@suse.de
> Cc: himanshu.madhani@oracle.com
> Cc: hch@infradead.org
> ---
> drivers/scsi/Kconfig | 1 +
> drivers/scsi/Makefile | 1 +
> drivers/scsi/mpi3mr/Kconfig | 7 +
> drivers/scsi/mpi3mr/mpi/mpi30_api.h | 18 +
> drivers/scsi/mpi3mr/mpi/mpi30_image.h | 220 +++++
> drivers/scsi/mpi3mr/mpi/mpi30_init.h | 163 ++++
> drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 1009 +++++++++++++++++++++
> drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 486 ++++++++++
> 8 files changed, 1905 insertions(+)
> create mode 100644 drivers/scsi/mpi3mr/Kconfig
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_api.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_image.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_init.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_transport.h
>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, 90409 Nürnberg
GF: F. Imendörffer, HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 38+ messages in thread* Re: [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig
2021-05-13 8:35 ` [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig Kashyap Desai
2021-05-14 11:31 ` Hannes Reinecke
@ 2021-05-14 14:39 ` Tomas Henzl
2021-05-14 16:18 ` Himanshu Madhani
2021-05-18 7:39 ` Christoph Hellwig
3 siblings, 0 replies; 38+ messages in thread
From: Tomas Henzl @ 2021-05-14 14:39 UTC (permalink / raw)
To: Kashyap Desai, linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash, bvanassche, hare,
himanshu.madhani, hch
On 5/13/21 10:35 AM, Kashyap Desai wrote:
> This adds the Kconfig and mpi30 headers.
>
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
>
> Cc: sathya.prakash@broadcom.com
> Cc: bvanassche@acm.org
> Cc: thenzl@redhat.com
> Cc: hare@suse.de
> Cc: himanshu.madhani@oracle.com
> Cc: hch@infradead.org
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig
2021-05-13 8:35 ` [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig Kashyap Desai
2021-05-14 11:31 ` Hannes Reinecke
2021-05-14 14:39 ` Tomas Henzl
@ 2021-05-14 16:18 ` Himanshu Madhani
2021-05-17 15:52 ` Kashyap Desai
2021-05-18 7:39 ` Christoph Hellwig
3 siblings, 1 reply; 38+ messages in thread
From: Himanshu Madhani @ 2021-05-14 16:18 UTC (permalink / raw)
To: Kashyap Desai
Cc: linux-scsi, James E.J. Bottomley, Martin Petersen, steve.hagan,
peter.rivera, mpi3mr-linuxdrv.pdl, Sathya Prakash Veerichetty,
Bart Van Assche, thenzl, Hannes Reinecke, hch
> On May 13, 2021, at 3:35 AM, Kashyap Desai <kashyap.desai@broadcom.com> wrote:
>
> This adds the Kconfig and mpi30 headers.
>
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
>
> Cc: sathya.prakash@broadcom.com
> Cc: bvanassche@acm.org
> Cc: thenzl@redhat.com
> Cc: hare@suse.de
> Cc: himanshu.madhani@oracle.com
> Cc: hch@infradead.org
> ---
> drivers/scsi/Kconfig | 1 +
> drivers/scsi/Makefile | 1 +
> drivers/scsi/mpi3mr/Kconfig | 7 +
> drivers/scsi/mpi3mr/mpi/mpi30_api.h | 18 +
> drivers/scsi/mpi3mr/mpi/mpi30_image.h | 220 +++++
> drivers/scsi/mpi3mr/mpi/mpi30_init.h | 163 ++++
> drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 1009 +++++++++++++++++++++
> drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 486 ++++++++++
> 8 files changed, 1905 insertions(+)
> create mode 100644 drivers/scsi/mpi3mr/Kconfig
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_api.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_image.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_init.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_transport.h
>
> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
> index 06b87c7f6bab..1f06811740a7 100644
> --- a/drivers/scsi/Kconfig
> +++ b/drivers/scsi/Kconfig
> @@ -482,6 +482,7 @@ config SCSI_ARCMSR
> source "drivers/scsi/esas2r/Kconfig"
> source "drivers/scsi/megaraid/Kconfig.megaraid"
> source "drivers/scsi/mpt3sas/Kconfig"
> +source "drivers/scsi/mpi3mr/Kconfig"
> source "drivers/scsi/smartpqi/Kconfig"
> source "drivers/scsi/ufs/Kconfig"
>
> diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
> index bc3882f5cc69..06f2d5fab899 100644
> --- a/drivers/scsi/Makefile
> +++ b/drivers/scsi/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
> obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
> obj-$(CONFIG_MEGARAID_SAS) += megaraid/
> obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
> +obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr/
> obj-$(CONFIG_SCSI_UFSHCD) += ufs/
> obj-$(CONFIG_SCSI_ACARD) += atp870u.o
> obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
> diff --git a/drivers/scsi/mpi3mr/Kconfig b/drivers/scsi/mpi3mr/Kconfig
> new file mode 100644
> index 000000000000..2d0568dd176a
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/Kconfig
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +config SCSI_MPI3MR
> + tristate "Broadcom MPI3 Storage Controller Device Driver"
> + depends on PCI && SCSI
> + help
> + This driver supports Broadcom's Unified MPI3 based Storage & RAID Controllers.
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
> new file mode 100644
> index 000000000000..48247c254953
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
> @@ -0,0 +1,18 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2019-2021 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_api.h
> + * Description: Root header that include all other MPI 3.0 headers
> + * Developers need to only include this header to gain
> + * access to the full MPI3.0 API definitions.
> + * Creation Date: 04/15/2019
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_API_H
> +#define MPI30_API_H 1
> +#include "mpi30_transport.h"
> +#include "mpi30_image.h"
> +#include "mpi30_init.h"
> +#include "mpi30_ioc.h"
> +#endif
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_image.h b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
> new file mode 100644
> index 000000000000..45e7510698cb
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
> @@ -0,0 +1,220 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2018-2021 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_image.h
> + * Description: Contains definitions for firmware and other component images.
> + * Creation Date: 04/02/2018
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_IMAGE_H
> +#define MPI30_IMAGE_H 1
> +struct _mpi3_comp_image_version {
> + __le16 build_num;
> + __le16 customer_id;
> + u8 phase_minor;
> + u8 phase_major;
> + u8 gen_minor;
> + u8 gen_major;
> +};
> +
> +struct _mpi3_hash_exclusion_format {
> + __le32 offset;
> + __le32 size;
> +};
> +
> +#define MPI3_IMAGE_HASH_EXCUSION_NUM (4)
> +struct _mpi3_component_image_header {
> + __le32 signature0;
> + __le32 load_address;
> + __le32 data_size;
> + __le32 start_offset;
> + __le32 signature1;
> + __le32 flash_offset;
> + __le32 image_size;
> + __le32 version_string_offset;
> + __le32 build_date_string_offset;
> + __le32 build_time_string_offset;
> + __le32 environment_variable_offset;
> + __le32 application_specific;
> + __le32 signature2;
> + __le32 header_size;
> + __le32 crc;
> + __le32 flags;
> + __le32 secondary_flash_offset;
> + __le32 etp_offset;
> + __le32 etp_size;
> + union _mpi3_version_union rmc_interface_version;
> + union _mpi3_version_union etp_interface_version;
> + struct _mpi3_comp_image_version component_image_version;
> + struct _mpi3_hash_exclusion_format hash_exclusion[MPI3_IMAGE_HASH_EXCUSION_NUM];
> + __le32 next_image_header_offset;
> + union _mpi3_version_union security_version;
> + __le32 reserved84[31];
> +};
> +
> +#define MPI3_IMAGE_HEADER_SIGNATURE0_MPI3 (0xeb00003e)
> +#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_INVALID (0x00000000)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_FIRST_MUTABLE (0x20434d46)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_BSP (0x20505342)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_ROM_BIOS (0x534f4942)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_X64 (0x4d494948)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_ARM (0x41494948)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_CPLD (0x444c5043)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_PBLP (0x504c4250)
> +#define MPI3_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546)
> +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_MASK (0x00000030)
> +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_CDI (0x00000000)
> +#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_DI (0x00000010)
> +#define MPI3_IMAGE_HEADER_FLAGS_SIGNED_NVDATA (0x00000008)
> +#define MPI3_IMAGE_HEADER_FLAGS_REQUIRES_ACTIVATION (0x00000004)
> +#define MPI3_IMAGE_HEADER_FLAGS_COMPRESSED (0x00000002)
> +#define MPI3_IMAGE_HEADER_FLAGS_FLASH (0x00000001)
> +#define MPI3_IMAGE_HEADER_SIGNATURE0_OFFSET (0x00)
> +#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_OFFSET (0x04)
> +#define MPI3_IMAGE_HEADER_DATA_SIZE_OFFSET (0x08)
> +#define MPI3_IMAGE_HEADER_START_OFFSET_OFFSET (0x0c)
> +#define MPI3_IMAGE_HEADER_SIGNATURE1_OFFSET (0x10)
> +#define MPI3_IMAGE_HEADER_FLASH_OFFSET_OFFSET (0x14)
> +#define MPI3_IMAGE_HEADER_FLASH_SIZE_OFFSET (0x18)
> +#define MPI3_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET (0x1c)
> +#define MPI3_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET (0x20)
> +#define MPI3_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET (0x24)
> +#define MPI3_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET (0x28)
> +#define MPI3_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET (0x2c)
> +#define MPI3_IMAGE_HEADER_SIGNATURE2_OFFSET (0x30)
> +#define MPI3_IMAGE_HEADER_HEADER_SIZE_OFFSET (0x34)
> +#define MPI3_IMAGE_HEADER_CRC_OFFSET (0x38)
> +#define MPI3_IMAGE_HEADER_FLAGS_OFFSET (0x3c)
> +#define MPI3_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET (0x40)
> +#define MPI3_IMAGE_HEADER_ETP_OFFSET_OFFSET (0x44)
> +#define MPI3_IMAGE_HEADER_ETP_SIZE_OFFSET (0x48)
> +#define MPI3_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET (0x4c)
> +#define MPI3_IMAGE_HEADER_ETP_INTERFACE_VER_OFFSET (0x50)
> +#define MPI3_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET (0x54)
> +#define MPI3_IMAGE_HEADER_HASH_EXCLUSION_OFFSET (0x5c)
> +#define MPI3_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET (0x7c)
> +#define MPI3_IMAGE_HEADER_SIZE (0x100)
> +struct _mpi3_extended_image_header {
> + u8 image_type;
> + u8 reserved01[3];
> + __le32 checksum;
> + __le32 image_size;
> + __le32 next_image_header_offset;
> + __le32 reserved10[4];
> + __le32 identify_string[8];
> +};
> +
> +#define MPI3_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
> +#define MPI3_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
> +#define MPI3_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0c)
> +#define MPI3_EXT_IMAGE_HEADER_SIZE (0x40)
> +#define MPI3_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
> +#define MPI3_EXT_IMAGE_TYPE_NVDATA (0x03)
> +#define MPI3_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
> +#define MPI3_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
> +#define MPI3_EXT_IMAGE_TYPE_RDE (0x0a)
> +#define MPI3_EXT_IMAGE_TYPE_AUXILIARY_PROCESSOR (0x0b)
> +#define MPI3_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
> +#define MPI3_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xff)
> +struct _mpi3_supported_device {
> + __le16 device_id;
> + __le16 vendor_id;
> + __le16 device_id_mask;
> + __le16 reserved06;
> + u8 low_pci_rev;
> + u8 high_pci_rev;
> + __le16 reserved0a;
> + __le32 reserved0c;
> +};
> +
> +#ifndef MPI3_SUPPORTED_DEVICE_MAX
> +#define MPI3_SUPPORTED_DEVICE_MAX (1)
> +#endif
> +struct _mpi3_supported_devices_data {
> + u8 image_version;
> + u8 reserved01;
> + u8 num_devices;
> + u8 reserved03;
> + __le32 reserved04;
> + struct _mpi3_supported_device supported_device[MPI3_SUPPORTED_DEVICE_MAX];
> +};
> +
> +#ifndef MPI3_ENCRYPTED_HASH_MAX
> +#define MPI3_ENCRYPTED_HASH_MAX (1)
> +#endif
> +struct _mpi3_encrypted_hash_entry {
> + u8 hash_image_type;
> + u8 hash_algorithm;
> + u8 encryption_algorithm;
> + u8 reserved03;
> + __le32 reserved04;
> + __le32 encrypted_hash[MPI3_ENCRYPTED_HASH_MAX];
> +};
> +
> +#define MPI3_HASH_IMAGE_TYPE_KEY_WITH_SIGNATURE (0x03)
> +#define MPI3_HASH_ALGORITHM_VERSION_MASK (0xe0)
> +#define MPI3_HASH_ALGORITHM_VERSION_NONE (0x00)
> +#define MPI3_HASH_ALGORITHM_VERSION_SHA1 (0x20)
> +#define MPI3_HASH_ALGORITHM_VERSION_SHA2 (0x40)
> +#define MPI3_HASH_ALGORITHM_VERSION_SHA3 (0x60)
> +#define MPI3_HASH_ALGORITHM_SIZE_MASK (0x1f)
> +#define MPI3_HASH_ALGORITHM_SIZE_UNUSED (0x00)
> +#define MPI3_HASH_ALGORITHM_SIZE_SHA256 (0x01)
> +#define MPI3_HASH_ALGORITHM_SIZE_SHA512 (0x02)
> +#define MPI3_ENCRYPTION_ALGORITHM_UNUSED (0x00)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA256 (0x01)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA512 (0x02)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA1024 (0x03)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA2048 (0x04)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA4096 (0x05)
> +#define MPI3_ENCRYPTION_ALGORITHM_RSA3072 (0x06)
> +#ifndef MPI3_PUBLIC_KEY_MAX
> +#define MPI3_PUBLIC_KEY_MAX (1)
> +#endif
> +struct _mpi3_encrypted_key_with_hash_entry {
> + u8 hash_image_type;
> + u8 hash_algorithm;
> + u8 encryption_algorithm;
> + u8 reserved03;
> + __le32 reserved04;
> + __le32 public_key[MPI3_PUBLIC_KEY_MAX];
> + __le32 encrypted_hash[MPI3_ENCRYPTED_HASH_MAX];
> +};
> +
> +#ifndef MPI3_ENCRYPTED_HASH_ENTRY_MAX
> +#define MPI3_ENCRYPTED_HASH_ENTRY_MAX (1)
> +#endif
> +struct _mpi3_encrypted_hash_data {
> + u8 image_version;
> + u8 num_hash;
> + __le16 reserved02;
> + __le32 reserved04;
> + struct _mpi3_encrypted_hash_entry encrypted_hash_entry[MPI3_ENCRYPTED_HASH_ENTRY_MAX];
> +};
> +
> +#ifndef MPI3_AUX_PROC_DATA_MAX
> +#define MPI3_AUX_PROC_DATA_MAX (1)
> +#endif
> +struct _mpi3_aux_processor_data {
> + u8 boot_method;
> + u8 num_load_addr;
> + u8 reserved02;
> + u8 type;
> + __le32 version;
> + __le32 load_address[8];
> + __le32 reserved28[22];
> + __le32 aux_processor_data[MPI3_AUX_PROC_DATA_MAX];
> +};
> +
> +#define MPI3_AUX_PROC_DATA_OFFSET (0x80)
> +#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_MSG (0x00)
> +#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_DOORBELL (0x01)
> +#define MPI3_AUXPROCESSOR_BOOT_METHOD_COMPONENT (0x02)
> +#define MPI3_AUXPROCESSOR_TYPE_ARM_A15 (0x00)
> +#define MPI3_AUXPROCESSOR_TYPE_ARM_M0 (0x01)
> +#define MPI3_AUXPROCESSOR_TYPE_ARM_R4 (0x02)
> +#endif
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_init.h b/drivers/scsi/mpi3mr/mpi/mpi30_init.h
> new file mode 100644
> index 000000000000..dfd968681889
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_init.h
> @@ -0,0 +1,163 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2016-2021 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_init.h
> + * Description: Contains definitions for SCSI initiator mode messages and structures.
> + * Creation Date: 10/27/2016
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_INIT_H
> +#define MPI30_INIT_H 1
> +struct _mpi3_scsi_io_cdb_eedp32 {
> + u8 cdb[20];
> + __be32 primary_reference_tag;
> + __le16 primary_application_tag;
> + __le16 primary_application_tag_mask;
> + __le32 transfer_length;
> +};
> +
> +union _mpi3_scso_io_cdb_union {
> + u8 cdb32[32];
> + struct _mpi3_scsi_io_cdb_eedp32 eedp32;
> + struct _mpi3_sge_common sge;
> +};
> +
> +struct _mpi3_scsi_io_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 dev_handle;
> + __le32 flags;
> + __le32 skip_count;
> + __le32 data_length;
> + u8 lun[8];
> + union _mpi3_scso_io_cdb_union cdb;
> + union _mpi3_sge_union sgl[4];
> +};
> +
> +#define MPI3_SCSIIO_MSGFLAGS_METASGL_VALID (0x80)
> +#define MPI3_SCSIIO_FLAGS_LARGE_CDB (0x60000000)
> +#define MPI3_SCSIIO_FLAGS_CDB_16_OR_LESS (0x00000000)
> +#define MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16 (0x20000000)
> +#define MPI3_SCSIIO_FLAGS_CDB_IN_SEPARATE_BUFFER (0x40000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_MASK (0x07000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ (0x00000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_HEADOFQ (0x01000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ORDEREDQ (0x02000000)
> +#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ACAQ (0x04000000)
> +#define MPI3_SCSIIO_FLAGS_CMDPRI_MASK (0x00f00000)
> +#define MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT (20)
> +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_MASK (0x000c0000)
> +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER (0x00000000)
> +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE (0x00040000)
> +#define MPI3_SCSIIO_FLAGS_DATADIRECTION_READ (0x00080000)
> +#define MPI3_SCSIIO_FLAGS_DMAOPERATION_MASK (0x00030000)
> +#define MPI3_SCSIIO_FLAGS_DMAOPERATION_HOST_PI (0x00010000)
> +#define MPI3_SCSIIO_METASGL_INDEX (3)
> +struct _mpi3_scsi_io_reply {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 ioc_use_only08;
> + __le16 ioc_status;
> + __le32 ioc_log_info;
> + u8 scsi_status;
> + u8 scsi_state;
> + __le16 dev_handle;
> + __le32 transfer_count;
> + __le32 sense_count;
> + __le32 response_data;
> + __le16 task_tag;
> + __le16 scsi_status_qualifier;
> + __le32 eedp_error_offset;
> + __le16 eedp_observed_app_tag;
> + __le16 eedp_observed_guard;
> + __le32 eedp_observed_ref_tag;
> + __le64 sense_data_buffer_address;
> +};
> +
> +#define MPI3_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
> +#define MPI3_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x02)
> +#define MPI3_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x04)
> +#define MPI3_SCSI_STATUS_GOOD (0x00)
> +#define MPI3_SCSI_STATUS_CHECK_CONDITION (0x02)
> +#define MPI3_SCSI_STATUS_CONDITION_MET (0x04)
> +#define MPI3_SCSI_STATUS_BUSY (0x08)
> +#define MPI3_SCSI_STATUS_INTERMEDIATE (0x10)
> +#define MPI3_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
> +#define MPI3_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
> +#define MPI3_SCSI_STATUS_COMMAND_TERMINATED (0x22)
> +#define MPI3_SCSI_STATUS_TASK_SET_FULL (0x28)
> +#define MPI3_SCSI_STATUS_ACA_ACTIVE (0x30)
> +#define MPI3_SCSI_STATUS_TASK_ABORTED (0x40)
> +#define MPI3_SCSI_STATE_SENSE_MASK (0x03)
> +#define MPI3_SCSI_STATE_SENSE_VALID (0x00)
> +#define MPI3_SCSI_STATE_SENSE_FAILED (0x01)
> +#define MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY (0x02)
> +#define MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE (0x03)
> +#define MPI3_SCSI_STATE_NO_SCSI_STATUS (0x04)
> +#define MPI3_SCSI_STATE_TERMINATED (0x08)
> +#define MPI3_SCSI_STATE_RESPONSE_DATA_VALID (0x10)
> +#define MPI3_SCSI_RSP_RESPONSECODE_MASK (0x000000ff)
> +#define MPI3_SCSI_RSP_RESPONSECODE_SHIFT (0)
> +#define MPI3_SCSI_RSP_ARI2_MASK (0x0000ff00)
> +#define MPI3_SCSI_RSP_ARI2_SHIFT (8)
> +#define MPI3_SCSI_RSP_ARI1_MASK (0x00ff0000)
> +#define MPI3_SCSI_RSP_ARI1_SHIFT (16)
> +#define MPI3_SCSI_RSP_ARI0_MASK (0xff000000)
> +#define MPI3_SCSI_RSP_ARI0_SHIFT (24)
> +#define MPI3_SCSI_TASKTAG_UNKNOWN (0xffff)
> +struct _mpi3_scsi_task_mgmt_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 dev_handle;
> + __le16 task_host_tag;
> + u8 task_type;
> + u8 reserved0f;
> + __le16 task_request_queue_id;
> + __le16 reserved12;
> + __le32 reserved14;
> + u8 lun[8];
> +};
> +
> +#define MPI3_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x08)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK_SET (0x02)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK_SET (0x09)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_ASYNC_EVENT (0x0a)
> +#define MPI3_SCSITASKMGMT_TASKTYPE_I_T_NEXUS_RESET (0x0b)
> +struct _mpi3_scsi_task_mgmt_reply {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 ioc_use_only08;
> + __le16 ioc_status;
> + __le32 ioc_log_info;
> + __le32 termination_count;
> + __le32 response_data;
> + __le32 reserved18;
> +};
> +
> +#define MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC (0x80)
> +#endif
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
> new file mode 100644
> index 000000000000..2c62075cbbe1
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
> @@ -0,0 +1,1009 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2016-2021 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_ioc.h
> + * Description: Contains definitions for IOC messages such as IOC Init, IOC Facts, Port Enable,
> + * Events, FW Download, and FW Upload.
> + * Creation Date: 10/24/2016
> + * Version: 03.00.00
> + */
> +#ifndef MPI30_IOC_H
> +#define MPI30_IOC_H 1
> +struct _mpi3_ioc_init_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 reserved0a;
> + union _mpi3_version_union mpi_version;
> + __le64 time_stamp;
> + u8 reserved18;
> + u8 who_init;
> + __le16 reserved1a;
> + __le16 reply_free_queue_depth;
> + __le16 reserved1e;
> + __le64 reply_free_queue_address;
> + __le32 reserved28;
> + __le16 sense_buffer_free_queue_depth;
> + __le16 sense_buffer_length;
> + __le64 sense_buffer_free_queue_address;
> + __le64 driver_information_address;
> +};
> +
> +#define MPI3_WHOINIT_NOT_INITIALIZED (0x00)
> +#define MPI3_WHOINIT_ROM_BIOS (0x02)
> +#define MPI3_WHOINIT_HOST_DRIVER (0x03)
> +#define MPI3_WHOINIT_MANUFACTURER (0x04)
> +struct _mpi3_driver_info_layout {
> + __le32 information_length;
> + u8 driver_signature[12];
> + u8 os_name[16];
> + u8 os_version[12];
> + u8 driver_name[20];
> + u8 driver_version[32];
> + u8 driver_release_date[20];
> + __le32 driver_capabilities;
> +};
> +
> +struct _mpi3_ioc_facts_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 reserved0a;
> + __le32 reserved0c;
> + union _mpi3_sge_union sgl;
> +};
> +
> +struct _mpi3_ioc_facts_data {
> + __le16 ioc_facts_data_length;
> + __le16 reserved02;
> + union _mpi3_version_union mpi_version;
> + struct _mpi3_comp_image_version fw_version;
> + __le32 ioc_capabilities;
> + u8 ioc_number;
> + u8 who_init;
> + __le16 max_msix_vectors;
> + __le16 max_outstanding_request;
> + __le16 product_id;
> + __le16 ioc_request_frame_size;
> + __le16 reply_frame_size;
> + __le16 ioc_exceptions;
> + __le16 max_persistent_id;
> + u8 sge_modifier_mask;
> + u8 sge_modifier_value;
> + u8 sge_modifier_shift;
> + u8 protocol_flags;
> + __le16 max_sas_initiators;
> + __le16 max_sas_targets;
> + __le16 max_sas_expanders;
> + __le16 max_enclosures;
> + __le16 min_dev_handle;
> + __le16 max_dev_handle;
> + __le16 max_pc_ie_switches;
> + __le16 max_nvme;
> + __le16 max_pds;
> + __le16 max_vds;
> + __le16 max_host_pds;
> + __le16 max_advanced_host_pds;
> + __le16 max_raid_pds;
> + __le16 max_posted_cmd_buffers;
> + __le32 flags;
> + __le16 max_operational_request_queues;
> + __le16 max_operational_reply_queues;
> + __le16 shutdown_timeout;
> + __le16 reserved4e;
> + __le32 diag_trace_size;
> + __le32 diag_fw_size;
> +};
> +
> +#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD (0x00000010)
> +#define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE (0x00000008)
> +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_GRAN_MASK (0x00000001)
> +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_IOC_GRAN (0x00000000)
> +#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_REPLY_Q_GRAN (0x00000001)
> +#define MPI3_IOCFACTS_PID_TYPE_MASK (0xf000)
> +#define MPI3_IOCFACTS_PID_TYPE_SHIFT (12)
> +#define MPI3_IOCFACTS_PID_PRODUCT_MASK (0x0f00)
> +#define MPI3_IOCFACTS_PID_PRODUCT_SHIFT (8)
> +#define MPI3_IOCFACTS_PID_FAMILY_MASK (0x00ff)
> +#define MPI3_IOCFACTS_PID_FAMILY_SHIFT (0)
> +#define MPI3_IOCFACTS_EXCEPT_SAFE_MODE (0x0800)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_MASK (0x0700)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_NONE (0x0000)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_RAID (0x0100)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_OOB (0x0200)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_RAID (0x0300)
> +#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_OOB (0x0400)
> +#define MPI3_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0080)
> +#define MPI3_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0040)
> +#define MPI3_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0020)
> +#define MPI3_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0010)
> +#define MPI3_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0008)
> +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x0001)
> +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_PRIMARY (0x0000)
> +#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_SECONDARY (0x0001)
> +#define MPI3_IOCFACTS_PROTOCOL_SAS (0x0010)
> +#define MPI3_IOCFACTS_PROTOCOL_SATA (0x0008)
> +#define MPI3_IOCFACTS_PROTOCOL_NVME (0x0004)
> +#define MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
> +#define MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
> +#define MPI3_IOCFACTS_FLAGS_SIGNED_NVDATA_REQUIRED (0x00010000)
> +#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK (0x0000ff00)
> +#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT (8)
> +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK (0x00000030)
> +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_NOT_STARTED (0x00000000)
> +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_IN_PROGRESS (0x00000010)
> +#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_COMPLETE (0x00000020)
> +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK (0x0000000f)
> +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA (0x00000000)
> +#define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002)
> +struct _mpi3_mgmt_passthrough_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 reserved0a;
> + __le32 reserved0c[5];
> + union _mpi3_sge_union command_sgl;
> + union _mpi3_sge_union response_sgl;
> +};
> +
> +struct _mpi3_create_request_queue_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 flags;
> + u8 burst;
> + __le16 size;
> + __le16 queue_id;
> + __le16 reply_queue_id;
> + __le16 reserved12;
> + __le32 reserved14;
> + __le64 base_address;
> +};
> +
> +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
> +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
> +#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
> +struct _mpi3_delete_request_queue_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 queue_id;
> +};
> +
> +struct _mpi3_create_reply_queue_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 flags;
> + u8 reserved0b;
> + __le16 size;
> + __le16 queue_id;
> + __le16 msix_index;
> + __le16 reserved12;
> + __le32 reserved14;
> + __le64 base_address;
> +};
> +
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_MASK (0x01)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_DISABLE (0x00)
> +#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE (0x01)
> +struct _mpi3_delete_reply_queue_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 queue_id;
> +};
> +
> +struct _mpi3_port_enable_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 reserved0a;
> +};
> +
> +#define MPI3_EVENT_LOG_DATA (0x01)
> +#define MPI3_EVENT_CHANGE (0x02)
> +#define MPI3_EVENT_GPIO_INTERRUPT (0x04)
> +#define MPI3_EVENT_TEMP_THRESHOLD (0x05)
> +#define MPI3_EVENT_CABLE_MGMT (0x06)
> +#define MPI3_EVENT_DEVICE_ADDED (0x07)
> +#define MPI3_EVENT_DEVICE_INFO_CHANGED (0x08)
> +#define MPI3_EVENT_PREPARE_FOR_RESET (0x09)
> +#define MPI3_EVENT_COMP_IMAGE_ACT_START (0x0a)
> +#define MPI3_EVENT_ENCL_DEVICE_ADDED (0x0b)
> +#define MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x0c)
> +#define MPI3_EVENT_DEVICE_STATUS_CHANGE (0x0d)
> +#define MPI3_EVENT_ENERGY_PACK_CHANGE (0x0e)
> +#define MPI3_EVENT_SAS_DISCOVERY (0x11)
> +#define MPI3_EVENT_SAS_BROADCAST_PRIMITIVE (0x12)
> +#define MPI3_EVENT_SAS_NOTIFY_PRIMITIVE (0x13)
> +#define MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x14)
> +#define MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW (0x15)
> +#define MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x16)
> +#define MPI3_EVENT_SAS_PHY_COUNTER (0x18)
> +#define MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x19)
> +#define MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x20)
> +#define MPI3_EVENT_PCIE_ENUMERATION (0x22)
> +#define MPI3_EVENT_HARD_RESET_RECEIVED (0x40)
> +#define MPI3_EVENT_MIN_PRODUCT_SPECIFIC (0x60)
> +#define MPI3_EVENT_MAX_PRODUCT_SPECIFIC (0x7f)
> +#define MPI3_EVENT_NOTIFY_EVENTMASK_WORDS (4)
> +struct _mpi3_event_notification_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 reserved0a;
> + __le16 sas_broadcast_primitive_masks;
> + __le16 sas_notify_primitive_masks;
> + __le32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS];
> +};
> +
> +struct _mpi3_event_notification_reply {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 ioc_use_only08;
> + __le16 ioc_status;
> + __le32 ioc_log_info;
> + u8 event_data_length;
> + u8 event;
> + __le16 ioc_change_count;
> + __le32 event_context;
> + __le32 event_data[1];
> +};
> +
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK (0x01)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED (0x01)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_NOT_REQUIRED (0x00)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_MASK (0x02)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_ORIGINAL (0x00)
> +#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_REPLAY (0x02)
> +struct _mpi3_event_data_gpio_interrupt {
> + u8 gpio_num;
> + u8 reserved01[3];
> +};
> +
> +struct _mpi3_event_data_temp_threshold {
> + __le16 status;
> + u8 sensor_num;
> + u8 reserved03;
> + __le16 current_temperature;
> + __le16 reserved06;
> + __le32 reserved08;
> + __le32 reserved0c;
> +};
> +
> +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD3_EXCEEDED (0x0008)
> +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD2_EXCEEDED (0x0004)
> +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD1_EXCEEDED (0x0002)
> +#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD0_EXCEEDED (0x0001)
> +struct _mpi3_event_data_cable_management {
> + __le32 active_cable_power_requirement;
> + u8 status;
> + u8 receptacle_id;
> + __le16 reserved06;
> +};
> +
> +#define MPI3_EVENT_CABLE_MGMT_ACT_CABLE_PWR_INVALID (0xffffffff)
> +#define MPI3_EVENT_CABLE_MGMT_STATUS_INSUFFICIENT_POWER (0x00)
> +#define MPI3_EVENT_CABLE_MGMT_STATUS_PRESENT (0x01)
> +#define MPI3_EVENT_CABLE_MGMT_STATUS_DEGRADED (0x02)
> +struct _mpi3_event_ack_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 reserved0a;
> + u8 event;
> + u8 reserved0d[3];
> + __le32 event_context;
> +};
> +
> +struct _mpi3_event_data_prepare_for_reset {
> + u8 reason_code;
> + u8 reserved01;
> + __le16 reserved02;
> +};
> +
> +#define MPI3_EVENT_PREPARE_RESET_RC_START (0x01)
> +#define MPI3_EVENT_PREPARE_RESET_RC_ABORT (0x02)
> +struct _mpi3_event_data_comp_image_activation {
> + __le32 reserved00;
> +};
> +
> +struct _mpi3_event_data_device_status_change {
> + __le16 task_tag;
> + u8 reason_code;
> + u8 io_unit_port;
> + __le16 parent_dev_handle;
> + __le16 dev_handle;
> + __le64 wwid;
> + u8 lun[8];
> +};
> +
> +#define MPI3_EVENT_DEV_STAT_RC_MOVED (0x01)
> +#define MPI3_EVENT_DEV_STAT_RC_HIDDEN (0x02)
> +#define MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN (0x03)
> +#define MPI3_EVENT_DEV_STAT_RC_ASYNC_NOTIFICATION (0x04)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT (0x20)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP (0x21)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_STRT (0x22)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_CMP (0x23)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT (0x24)
> +#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP (0x25)
> +#define MPI3_EVENT_DEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x30)
> +#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_STRT (0x40)
> +#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_CMP (0x41)
> +#define MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING (0x50)
> +struct _mpi3_event_data_energy_pack_change {
> + __le32 reserved00;
> + __le16 shutdown_timeout;
> + __le16 reserved06;
> +};
> +
> +struct _mpi3_event_data_sas_discovery {
> + u8 flags;
> + u8 reason_code;
> + u8 io_unit_port;
> + u8 reserved03;
> + __le32 discovery_status;
> +};
> +
> +#define MPI3_EVENT_SAS_DISC_FLAGS_DEVICE_CHANGE (0x02)
> +#define MPI3_EVENT_SAS_DISC_FLAGS_IN_PROGRESS (0x01)
> +#define MPI3_EVENT_SAS_DISC_RC_STARTED (0x01)
> +#define MPI3_EVENT_SAS_DISC_RC_COMPLETED (0x02)
> +#define MPI3_SAS_DISC_STATUS_MAX_ENCLOSURES_EXCEED (0x80000000)
> +#define MPI3_SAS_DISC_STATUS_MAX_EXPANDERS_EXCEED (0x40000000)
> +#define MPI3_SAS_DISC_STATUS_MAX_DEVICES_EXCEED (0x20000000)
> +#define MPI3_SAS_DISC_STATUS_MAX_TOPO_PHYS_EXCEED (0x10000000)
> +#define MPI3_SAS_DISC_STATUS_MULTIPLE_DEVICES_IN_SLOT (0x00004000)
> +#define MPI3_SAS_DISC_STATUS_SLOT_COUNT_MISMATCH (0x00002000)
> +#define MPI3_SAS_DISC_STATUS_TOO_MANY_SLOTS (0x00001000)
> +#define MPI3_SAS_DISC_STATUS_EXP_MULTI_SUBTRACTIVE (0x00000800)
> +#define MPI3_SAS_DISC_STATUS_MULTI_PORT_DOMAIN (0x00000400)
> +#define MPI3_SAS_DISC_STATUS_TABLE_TO_SUBTRACTIVE_LINK (0x00000200)
> +#define MPI3_SAS_DISC_STATUS_UNSUPPORTED_DEVICE (0x00000100)
> +#define MPI3_SAS_DISC_STATUS_TABLE_LINK (0x00000080)
> +#define MPI3_SAS_DISC_STATUS_SUBTRACTIVE_LINK (0x00000040)
> +#define MPI3_SAS_DISC_STATUS_SMP_CRC_ERROR (0x00000020)
> +#define MPI3_SAS_DISC_STATUS_SMP_FUNCTION_FAILED (0x00000010)
> +#define MPI3_SAS_DISC_STATUS_SMP_TIMEOUT (0x00000008)
> +#define MPI3_SAS_DISC_STATUS_MULTIPLE_PORTS (0x00000004)
> +#define MPI3_SAS_DISC_STATUS_INVALID_SAS_ADDRESS (0x00000002)
> +#define MPI3_SAS_DISC_STATUS_LOOP_DETECTED (0x00000001)
> +struct _mpi3_event_data_sas_broadcast_primitive {
> + u8 phy_num;
> + u8 io_unit_port;
> + u8 port_width;
> + u8 primitive;
> +};
> +
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE (0x01)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_SES (0x02)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_EXPANDER (0x03)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED3 (0x05)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED4 (0x06)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE0_RESERVED (0x07)
> +#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE1_RESERVED (0x08)
> +struct _mpi3_event_data_sas_notify_primitive {
> + u8 phy_num;
> + u8 io_unit_port;
> + u8 reserved02;
> + u8 primitive;
> +};
> +
> +#define MPI3_EVENT_NOTIFY_PRIMITIVE_ENABLE_SPINUP (0x01)
> +#define MPI3_EVENT_NOTIFY_PRIMITIVE_POWER_LOSS_EXPECTED (0x02)
> +#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED1 (0x03)
> +#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED2 (0x04)
> +#ifndef MPI3_EVENT_SAS_TOPO_PHY_COUNT
> +#define MPI3_EVENT_SAS_TOPO_PHY_COUNT (1)
> +#endif
> +struct _mpi3_event_sas_topo_phy_entry {
> + __le16 attached_dev_handle;
> + u8 link_rate;
> + u8 status;
> +};
> +
> +#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xf0)
> +#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
> +#define MPI3_EVENT_SAS_TOPO_LR_PREV_MASK (0x0f)
> +#define MPI3_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
> +#define MPI3_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
> +#define MPI3_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
> +#define MPI3_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
> +#define MPI3_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
> +#define MPI3_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
> +#define MPI3_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
> +#define MPI3_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
> +#define MPI3_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0a)
> +#define MPI3_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0b)
> +#define MPI3_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0c)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_MASK (0xc0)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_SHIFT (6)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_ACCESSIBLE (0x00)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_NO_EXIST (0x40)
> +#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_VACANT (0x80)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_MASK (0x0f)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING (0x02)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED (0x03)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE (0x04)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING (0x05)
> +#define MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING (0x06)
> +struct _mpi3_event_data_sas_topology_change_list {
> + __le16 enclosure_handle;
> + __le16 expander_dev_handle;
> + u8 num_phys;
> + u8 reserved05[3];
> + u8 num_entries;
> + u8 start_phy_num;
> + u8 exp_status;
> + u8 io_unit_port;
> + struct _mpi3_event_sas_topo_phy_entry phy_entry[MPI3_EVENT_SAS_TOPO_PHY_COUNT];
> +};
> +
> +#define MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
> +#define MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
> +#define MPI3_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
> +#define MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
> +struct _mpi3_event_data_sas_phy_counter {
> + __le64 time_stamp;
> + __le32 reserved08;
> + u8 phy_event_code;
> + u8 phy_num;
> + __le16 reserved0e;
> + __le32 phy_event_info;
> + u8 counter_type;
> + u8 threshold_window;
> + u8 time_units;
> + u8 reserved17;
> + __le32 event_threshold;
> + __le16 threshold_flags;
> + __le16 reserved1e;
> +};
> +
> +struct _mpi3_event_data_sas_device_disc_err {
> + __le16 dev_handle;
> + u8 reason_code;
> + u8 io_unit_port;
> + __le32 reserved04;
> + __le64 sas_address;
> +};
> +
> +#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_FAILED (0x01)
> +#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_TIMEOUT (0x02)
> +struct _mpi3_event_data_pcie_enumeration {
> + u8 flags;
> + u8 reason_code;
> + u8 io_unit_port;
> + u8 reserved03;
> + __le32 enumeration_status;
> +};
> +
> +#define MPI3_EVENT_PCIE_ENUM_FLAGS_DEVICE_CHANGE (0x02)
> +#define MPI3_EVENT_PCIE_ENUM_FLAGS_IN_PROGRESS (0x01)
> +#define MPI3_EVENT_PCIE_ENUM_RC_STARTED (0x01)
> +#define MPI3_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
> +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCH_DEPTH_EXCEED (0x80000000)
> +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
> +#define MPI3_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
> +#define MPI3_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
> +#ifndef MPI3_EVENT_PCIE_TOPO_PORT_COUNT
> +#define MPI3_EVENT_PCIE_TOPO_PORT_COUNT (1)
> +#endif
> +struct _mpi3_event_pcie_topo_port_entry {
> + __le16 attached_dev_handle;
> + u8 port_status;
> + u8 reserved03;
> + u8 current_port_info;
> + u8 reserved05;
> + u8 previous_port_info;
> + u8 reserved07;
> +};
> +
> +#define MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
> +#define MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
> +#define MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
> +#define MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
> +#define MPI3_EVENT_PCIE_TOPO_PS_RESPONDING (0x06)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_MASK (0xf0)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_1 (0x10)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_2 (0x20)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_4 (0x30)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_8 (0x40)
> +#define MPI3_EVENT_PCIE_TOPO_PI_LANES_16 (0x50)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0f)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
> +#define MPI3_EVENT_PCIE_TOPO_PI_RATE_32_0 (0x06)
> +struct _mpi3_event_data_pcie_topology_change_list {
> + __le16 enclosure_handle;
> + __le16 switch_dev_handle;
> + u8 num_ports;
> + u8 reserved05[3];
> + u8 num_entries;
> + u8 start_port_num;
> + u8 switch_status;
> + u8 io_unit_port;
> + __le32 reserved0c;
> + struct _mpi3_event_pcie_topo_port_entry port_entry[MPI3_EVENT_PCIE_TOPO_PORT_COUNT];
> +};
> +
> +#define MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
> +#define MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
> +#define MPI3_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
> +#define MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
> +struct _mpi3_event_data_sas_init_dev_status_change {
> + u8 reason_code;
> + u8 io_unit_port;
> + __le16 dev_handle;
> + __le32 reserved04;
> + __le64 sas_address;
> +};
> +
> +#define MPI3_EVENT_SAS_INIT_RC_ADDED (0x01)
> +#define MPI3_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
> +struct _mpi3_event_data_sas_init_table_overflow {
> + __le16 max_init;
> + __le16 current_init;
> + __le32 reserved04;
> + __le64 sas_address;
> +};
> +
> +struct _mpi3_event_data_hard_reset_received {
> + u8 reserved00;
> + u8 io_unit_port;
> + __le16 reserved02;
> +};
> +
> +#define MPI3_PEL_LOCALE_FLAGS_NON_BLOCKING_BOOT_EVENT (0x0200)
> +#define MPI3_PEL_LOCALE_FLAGS_BLOCKING_BOOT_EVENT (0x0100)
> +#define MPI3_PEL_LOCALE_FLAGS_PCIE (0x0080)
> +#define MPI3_PEL_LOCALE_FLAGS_CONFIGURATION (0x0040)
> +#define MPI3_PEL_LOCALE_FLAGS_CONTROLER (0x0020)
> +#define MPI3_PEL_LOCALE_FLAGS_SAS (0x0010)
> +#define MPI3_PEL_LOCALE_FLAGS_EPACK (0x0008)
> +#define MPI3_PEL_LOCALE_FLAGS_ENCLOSURE (0x0004)
> +#define MPI3_PEL_LOCALE_FLAGS_PD (0x0002)
> +#define MPI3_PEL_LOCALE_FLAGS_VD (0x0001)
> +#define MPI3_PEL_CLASS_DEBUG (0x00)
> +#define MPI3_PEL_CLASS_PROGRESS (0x01)
> +#define MPI3_PEL_CLASS_INFORMATIONAL (0x02)
> +#define MPI3_PEL_CLASS_WARNING (0x03)
> +#define MPI3_PEL_CLASS_CRITICAL (0x04)
> +#define MPI3_PEL_CLASS_FATAL (0x05)
> +#define MPI3_PEL_CLASS_FAULT (0x06)
> +#define MPI3_PEL_CLEARTYPE_CLEAR (0x00)
> +#define MPI3_PEL_WAITTIME_INFINITE_WAIT (0x00)
> +#define MPI3_PEL_ACTION_GET_SEQNUM (0x01)
> +#define MPI3_PEL_ACTION_MARK_CLEAR (0x02)
> +#define MPI3_PEL_ACTION_GET_LOG (0x03)
> +#define MPI3_PEL_ACTION_GET_COUNT (0x04)
> +#define MPI3_PEL_ACTION_WAIT (0x05)
> +#define MPI3_PEL_ACTION_ABORT (0x06)
> +#define MPI3_PEL_ACTION_GET_PRINT_STRINGS (0x07)
> +#define MPI3_PEL_ACTION_ACKNOWLEDGE (0x08)
> +#define MPI3_PEL_STATUS_SUCCESS (0x00)
> +#define MPI3_PEL_STATUS_NOT_FOUND (0x01)
> +#define MPI3_PEL_STATUS_ABORTED (0x02)
> +#define MPI3_PEL_STATUS_NOT_READY (0x03)
> +struct _mpi3_pel_seq {
> + __le32 newest;
> + __le32 oldest;
> + __le32 clear;
> + __le32 shutdown;
> + __le32 boot;
> + __le32 last_acknowledged;
> +};
> +
> +struct _mpi3_pel_entry {
> + __le32 sequence_number;
> + __le32 time_stamp[2];
> + __le16 log_code;
> + __le16 arg_type;
> + __le16 locale;
> + u8 class;
> + u8 reserved13;
> + u8 ext_num;
> + u8 num_exts;
> + u8 arg_data_size;
> + u8 fixed_format_size;
> + __le32 reserved18[2];
> + __le32 pel_info[24];
> +};
> +
> +struct _mpi3_pel_list {
> + __le32 log_count;
> + __le32 reserved04;
> + struct _mpi3_pel_entry entry[1];
> +};
> +
> +struct _mpi3_pel_arg_map {
> + u8 arg_type;
> + u8 length;
> + __le16 start_location;
> +};
> +
> +#define MPI3_PEL_ARG_MAP_ARG_TYPE_APPEND_STRING (0x00)
> +#define MPI3_PEL_ARG_MAP_ARG_TYPE_INTEGER (0x01)
> +#define MPI3_PEL_ARG_MAP_ARG_TYPE_STRING (0x02)
> +#define MPI3_PEL_ARG_MAP_ARG_TYPE_BIT_FIELD (0x03)
> +struct _mpi3_pel_print_string {
> + __le16 log_code;
> + __le16 string_length;
> + u8 num_arg_map;
> + u8 reserved05[3];
> + struct _mpi3_pel_arg_map arg_map[1];
> +};
> +
> +struct _mpi3_pel_print_string_list {
> + __le32 num_print_strings;
> + __le32 residual_bytes_remain;
> + __le32 reserved08[2];
> + struct _mpi3_pel_print_string print_string[1];
> +};
> +
> +#ifndef MPI3_PEL_ACTION_SPECIFIC_MAX
> +#define MPI3_PEL_ACTION_SPECIFIC_MAX (1)
> +#endif
> +struct _mpi3_pel_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 action_specific[MPI3_PEL_ACTION_SPECIFIC_MAX];
> +};
> +
> +struct _mpi3_pel_req_action_get_sequence_numbers {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 reserved0c[5];
> + union _mpi3_sge_union sgl;
> +};
> +
> +struct _mpi3_pel_req_action_clear_log_marker {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + u8 clear_type;
> + u8 reserved0d[3];
> +};
> +
> +struct _mpi3_pel_req_action_get_log {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 starting_sequence_number;
> + __le16 locale;
> + u8 class;
> + u8 reserved13;
> + __le32 reserved14[3];
> + union _mpi3_sge_union sgl;
> +};
> +
> +struct _mpi3_pel_req_action_get_count {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 starting_sequence_number;
> + __le16 locale;
> + u8 class;
> + u8 reserved13;
> + __le32 reserved14[3];
> + union _mpi3_sge_union sgl;
> +};
> +
> +struct _mpi3_pel_req_action_wait {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 starting_sequence_number;
> + __le16 locale;
> + u8 class;
> + u8 reserved13;
> + __le16 wait_time;
> + __le16 reserved16;
> + __le32 reserved18[2];
> +};
> +
> +struct _mpi3_pel_req_action_abort {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 reserved0c;
> + __le16 abort_host_tag;
> + __le16 reserved12;
> + __le32 reserved14;
> +};
> +
> +struct _mpi3_pel_req_action_get_print_strings {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 reserved0c;
> + __le16 start_log_code;
> + __le16 reserved12;
> + __le32 reserved14[3];
> + union _mpi3_sge_union sgl;
> +};
> +
> +struct _mpi3_pel_req_action_acknowledge {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 sequence_number;
> + __le32 reserved10;
> +};
> +
> +#define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT (0x01)
> +struct _mpi3_pel_reply {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 ioc_use_only08;
> + __le16 ioc_status;
> + __le32 ioc_log_info;
> + u8 action;
> + u8 reserved11;
> + __le16 reserved12;
> + __le16 pe_log_status;
> + __le16 reserved16;
> + __le32 transfer_length;
> +};
> +
> +struct _mpi3_ci_download_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 action;
> + u8 reserved0b;
> + __le32 signature1;
> + __le32 total_image_size;
> + __le32 image_offset;
> + __le32 segment_size;
> + __le32 reserved1c;
> + union _mpi3_sge_union sgl;
> +};
> +
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_LAST_SEGMENT (0x80)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_FORCE_FMC_ENABLE (0x40)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_SIGNED_NVDATA (0x20)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MASK (0x03)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_FAST (0x00)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MEDIUM (0x01)
> +#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_SLOW (0x02)
> +#define MPI3_CI_DOWNLOAD_ACTION_DOWNLOAD (0x01)
> +#define MPI3_CI_DOWNLOAD_ACTION_ONLINE_ACTIVATION (0x02)
> +#define MPI3_CI_DOWNLOAD_ACTION_OFFLINE_ACTIVATION (0x03)
> +#define MPI3_CI_DOWNLOAD_ACTION_GET_STATUS (0x04)
> +struct _mpi3_ci_download_reply {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 ioc_use_only08;
> + __le16 ioc_status;
> + __le32 ioc_log_info;
> + u8 flags;
> + u8 cache_dirty;
> + u8 pending_count;
> + u8 reserved13;
> +};
> +
> +#define MPI3_CI_DOWNLOAD_FLAGS_DOWNLOAD_IN_PROGRESS (0x80)
> +#define MPI3_CI_DOWNLOAD_FLAGS_KEY_UPDATE_PENDING (0x10)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_MASK (0x0e)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_NOT_NEEDED (0x00)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_AWAITING (0x02)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_ONLINE_PENDING (0x04)
> +#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_OFFLINE_PENDING (0x06)
> +#define MPI3_CI_DOWNLOAD_FLAGS_COMPATIBLE (0x01)
> +struct _mpi3_ci_upload_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 reserved0a;
> + __le32 signature1;
> + __le32 reserved10;
> + __le32 image_offset;
> + __le32 segment_size;
> + __le32 reserved1c;
> + union _mpi3_sge_union sgl;
> +};
> +
> +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_MASK (0x01)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY (0x00)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_SECONDARY (0x01)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_MASK (0x02)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_FLASH (0x00)
> +#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_EXECUTABLE (0x02)
> +#define MPI3_CTRL_OP_FORCE_FULL_DISCOVERY (0x01)
> +#define MPI3_CTRL_OP_LOOKUP_MAPPING (0x02)
> +#define MPI3_CTRL_OP_UPDATE_TIMESTAMP (0x04)
> +#define MPI3_CTRL_OP_GET_TIMESTAMP (0x05)
> +#define MPI3_CTRL_OP_REMOVE_DEVICE (0x10)
> +#define MPI3_CTRL_OP_CLOSE_PERSISTENT_CONNECTION (0x11)
> +#define MPI3_CTRL_OP_HIDDEN_ACK (0x12)
> +#define MPI3_CTRL_OP_SAS_SEND_PRIMITIVE (0x20)
> +#define MPI3_CTRL_OP_SAS_CLEAR_ERROR_LOG (0x21)
> +#define MPI3_CTRL_OP_PCIE_CLEAR_ERROR_LOG (0x22)
> +#define MPI3_CTRL_OP_LOOKUP_MAPPING_PARAM8_LOOKUP_METHOD_INDEX (0x00)
> +#define MPI3_CTRL_OP_UPDATE_TIMESTAMP_PARAM64_TIMESTAMP_INDEX (0x00)
> +#define MPI3_CTRL_OP_REMOVE_DEVICE_PARAM16_DEVHANDLE_INDEX (0x00)
> +#define MPI3_CTRL_OP_CLOSE_PERSIST_CONN_PARAM16_DEVHANDLE_INDEX (0x00)
> +#define MPI3_CTRL_OP_HIDDEN_ACK_PARAM16_DEVHANDLE_INDEX (0x00)
> +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PHY_INDEX (0x00)
> +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PRIMSEQ_INDEX (0x01)
> +#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM32_PRIMITIVE_INDEX (0x00)
> +#define MPI3_CTRL_OP_SAS_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00)
> +#define MPI3_CTRL_OP_PCIE_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00)
> +#define MPI3_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
> +#define MPI3_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
> +#define MPI3_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
> +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTENT_ID (0x04)
> +#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM16_DEVH_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM64_WWID_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM16_SLOTNUM_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM64_ENCLOSURELID_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM16_DEVH_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM64_DEVNAME_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_DEVH_INDEX (0)
> +#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_PERSISTENT_ID_INDEX (1)
> +#define MPI3_CTRL_LOOKUP_METHOD_VALUE16_DEVH_INDEX (0)
> +#define MPI3_CTRL_GET_TIMESTAMP_VALUE64_TIMESTAMP_INDEX (0)
> +#define MPI3_CTRL_PRIMFLAGS_SINGLE (0x01)
> +#define MPI3_CTRL_PRIMFLAGS_TRIPLE (0x03)
> +#define MPI3_CTRL_PRIMFLAGS_REDUNDANT (0x06)
> +struct _mpi3_iounit_control_request {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + u8 reserved0a;
> + u8 operation;
> + __le32 reserved0c;
> + __le64 param64[2];
> + __le32 param32[4];
> + __le16 param16[4];
> + u8 param8[8];
> +};
> +
> +struct _mpi3_iounit_control_reply {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 ioc_use_only08;
> + __le16 ioc_status;
> + __le32 ioc_log_info;
> + __le64 value64[2];
> + __le32 value32[4];
> + __le16 value16[4];
> + u8 value8[8];
> +};
> +#endif
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
> new file mode 100644
> index 000000000000..d2a5e7e84b16
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
> @@ -0,0 +1,486 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright 2016-2021 Broadcom Inc. All rights reserved.
> + *
> + * Name: mpi30_transport.h
> + * Description: Contains definitions for System Interface Register Set, Scatter Gather Lists etc
> + * Creation Date: 08/31/2016
> + * Version: 03.00.00
> + *
> + * mpi3.h Version: 03.00.00.18
> + *
> + *
> + * Version History
> + * ---------------
> + *
> + * Date Version Description
> + * -------- ----------- ------------------------------------------------------
> + * 11-30-18 03.00.00.08 Corresponds to Fusion-MPT MPI 3.0 Specification Rev H.
> + * 02-08-19 03.00.00.09 Corresponds to Fusion-MPT MPI 3.0 Specification Rev I.
> + * 05-03-19 03.00.00.10 Corresponds to Fusion-MPT MPI 3.0 Specification Rev J.
> + * 08-30-19 03.00.00.12 Corresponds to Fusion-MPT MPI 3.0 Specification Rev L.
> + * 11-01-19 03.00.00.13 Corresponds to Fusion-MPT MPI 3.0 Specification Rev M.
> + * 12-16-19 03.00.00.14 Corresponds to Fusion-MPT MPI 3.0 Specification Rev N.
> + * 02-28-20 03.00.00.15 Corresponds to Fusion-MPT MPI 3.0 Specification Rev O.
> + * 05-01-20 03.00.00.16 Corresponds to Fusion-MPT MPI 3.0 Specification Rev P.
> + * 06-26-20 03.00.00.17 Corresponds to Fusion-MPT MPI 3.0 Specification Rev Q.
> + * 08-28-20 03.00.00.18 Corresponds to Fusion-MPT MPI 3.0 Specification Rev R.
> + */
> +#ifndef MPI30_TRANSPORT_H
> +#define MPI30_TRANSPORT_H 1
> +struct _mpi3_version_struct {
> + u8 dev;
> + u8 unit;
> + u8 minor;
> + u8 major;
> +};
> +
> +union _mpi3_version_union {
> + struct _mpi3_version_struct mpi3_version;
> + __le32 word;
> +};
> +
> +#define MPI3_VERSION_MAJOR (3)
> +#define MPI3_VERSION_MINOR (0)
> +#define MPI3_VERSION_UNIT (0)
> +#define MPI3_VERSION_DEV (18)
> +struct _mpi3_sysif_oper_queue_indexes {
> + __le16 producer_index;
> + __le16 reserved02;
> + __le16 consumer_index;
> + __le16 reserved06;
> +};
> +
> +struct _mpi3_sysif_registers {
> + __le64 ioc_information;
> + union _mpi3_version_union version;
> + __le32 reserved0c[2];
> + __le32 ioc_configuration;
> + __le32 reserved18;
> + __le32 ioc_status;
> + __le32 reserved20;
> + __le32 admin_queue_num_entries;
> + __le64 admin_request_queue_address;
> + __le64 admin_reply_queue_address;
> + __le32 reserved38[2];
> + __le32 coalesce_control;
> + __le32 reserved44[1007];
> + __le16 admin_request_queue_pi;
> + __le16 reserved1002;
> + __le16 admin_reply_queue_ci;
> + __le16 reserved1006;
> + struct _mpi3_sysif_oper_queue_indexes oper_queue_indexes[383];
> + __le32 reserved1c00;
> + __le32 write_sequence;
> + __le32 host_diagnostic;
> + __le32 reserved1c0c;
> + __le32 fault;
> + __le32 fault_info[3];
> + __le32 reserved1c20[4];
> + __le64 hcb_address;
> + __le32 hcb_size;
> + __le32 reserved1c3c;
> + __le32 reply_free_host_index;
> + __le32 sense_buffer_free_host_index;
> + __le32 reserved1c48[2];
> + __le64 diag_rw_data;
> + __le64 diag_rw_address;
> + __le16 diag_rw_control;
> + __le16 diag_rw_status;
> + __le32 reserved1c64[35];
> + __le32 scratchpad[4];
> + __le32 reserved1d00[192];
> + __le32 device_assigned_registers[2048];
> +};
> +
> +#define MPI3_SYSIF_IOC_INFO_LOW_OFFSET (0x00000000)
> +#define MPI3_SYSIF_IOC_INFO_HIGH_OFFSET (0x00000004)
> +#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK (0xff000000)
> +#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT (24)
> +#define MPI3_SYSIF_IOC_CONFIG_OFFSET (0x00000014)
> +#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ (0x00f00000)
> +#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT (20)
> +#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ (0x000f0000)
> +#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT (16)
> +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_MASK (0x0000c000)
> +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NO (0x00000000)
> +#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL (0x00004000)
> +#define MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN (0x00002000)
> +#define MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE (0x00000010)
> +#define MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC (0x00000001)
> +#define MPI3_SYSIF_IOC_STATUS_OFFSET (0x0000001c)
> +#define MPI3_SYSIF_IOC_STATUS_RESET_HISTORY (0x00000010)
> +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK (0x0000000c)
> +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_NONE (0x00000000)
> +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS (0x00000004)
> +#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE (0x00000008)
> +#define MPI3_SYSIF_IOC_STATUS_FAULT (0x00000002)
> +#define MPI3_SYSIF_IOC_STATUS_READY (0x00000001)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_OFFSET (0x00000024)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REQ_MASK (0x0fff)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_OFFSET (0x00000026)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_MASK (0x0fff0000)
> +#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_SHIFT (16)
> +#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_LOW_OFFSET (0x00000028)
> +#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_HIGH_OFFSET (0x0000002c)
> +#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_LOW_OFFSET (0x00000030)
> +#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_HIGH_OFFSET (0x00000034)
> +#define MPI3_SYSIF_COALESCE_CONTROL_OFFSET (0x00000040)
> +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_MASK (0xc0000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_NO_CHANGE (0x00000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_DISABLE (0x40000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_ENABLE (0xc0000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_VALID (0x30000000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_MASK (0x00ff0000)
> +#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_SHIFT (16)
> +#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_MASK (0x0000ff00)
> +#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_SHIFT (8)
> +#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_MASK (0x000000ff)
> +#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_SHIFT (0)
> +#define MPI3_SYSIF_ADMIN_REQ_Q_PI_OFFSET (0x00001000)
> +#define MPI3_SYSIF_ADMIN_REPLY_Q_CI_OFFSET (0x00001004)
> +#define MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET (0x00001008)
> +#define MPI3_SYSIF_OPER_REQ_Q_N_PI_OFFSET(n) (MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET + (((n) - 1) * 8))
> +#define MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET (0x0000100c)
> +#define MPI3_SYSIF_OPER_REPLY_Q_N_CI_OFFSET(n) (MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET + (((n) - 1) * 8))
> +#define MPI3_SYSIF_WRITE_SEQUENCE_OFFSET (0x00001c04)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_MASK (0x0000000f)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH (0x0)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST (0xf)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND (0x4)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD (0xb)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH (0x2)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH (0x7)
> +#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH (0xd)
> +#define MPI3_SYSIF_HOST_DIAG_OFFSET (0x00001c08)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_MASK (0x00000700)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_NO_RESET (0x00000000)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET (0x00000100)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_FLASH_RCVRY_RESET (0x00000200)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_COMPLETE_RESET (0x00000300)
> +#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT (0x00000700)
> +#define MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS (0x00000080)
> +#define MPI3_SYSIF_HOST_DIAG_SECURE_BOOT (0x00000040)
> +#define MPI3_SYSIF_HOST_DIAG_CLEAR_INVALID_FW_IMAGE (0x00000020)
> +#define MPI3_SYSIF_HOST_DIAG_INVALID_FW_IMAGE (0x00000010)
> +#define MPI3_SYSIF_HOST_DIAG_HCBENABLE (0x00000008)
> +#define MPI3_SYSIF_HOST_DIAG_HCBMODE (0x00000004)
> +#define MPI3_SYSIF_HOST_DIAG_DIAG_RW_ENABLE (0x00000002)
> +#define MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE (0x00000001)
> +#define MPI3_SYSIF_FAULT_OFFSET (0x00001c10)
> +#define MPI3_SYSIF_FAULT_FUNC_AREA_MASK (0xff000000)
> +#define MPI3_SYSIF_FAULT_FUNC_AREA_SHIFT (24)
> +#define MPI3_SYSIF_FAULT_FUNC_AREA_MPI_DEFINED (0x00000000)
> +#define MPI3_SYSIF_FAULT_CODE_MASK (0x0000ffff)
> +#define MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET (0x0000f000)
> +#define MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET (0x0000f001)
> +#define MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS (0x0000f002)
> +#define MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED (0x0000f003)
> +#define MPI3_SYSIF_FAULT_CODE_SAFE_MODE_EXIT (0x0000f004)
> +#define MPI3_SYSIF_FAULT_CODE_FACTORY_RESET (0x0000f005)
> +#define MPI3_SYSIF_FAULT_INFO0_OFFSET (0x00001c14)
> +#define MPI3_SYSIF_FAULT_INFO1_OFFSET (0x00001c18)
> +#define MPI3_SYSIF_FAULT_INFO2_OFFSET (0x00001c1c)
> +#define MPI3_SYSIF_HCB_ADDRESS_LOW_OFFSET (0x00001c30)
> +#define MPI3_SYSIF_HCB_ADDRESS_HIGH_OFFSET (0x00001c34)
> +#define MPI3_SYSIF_HCB_SIZE_OFFSET (0x00001c38)
> +#define MPI3_SYSIF_HCB_SIZE_SIZE_MASK (0xfffff000)
> +#define MPI3_SYSIF_HCB_SIZE_SIZE_SHIFT (12)
> +#define MPI3_SYSIF_HCB_SIZE_HCDW_ENABLE (0x00000001)
> +#define MPI3_SYSIF_REPLY_FREE_HOST_INDEX_OFFSET (0x00001c40)
> +#define MPI3_SYSIF_SENSE_BUF_FREE_HOST_INDEX_OFFSET (0x00001c44)
> +#define MPI3_SYSIF_DIAG_RW_DATA_LOW_OFFSET (0x00001c50)
> +#define MPI3_SYSIF_DIAG_RW_DATA_HIGH_OFFSET (0x00001c54)
> +#define MPI3_SYSIF_DIAG_RW_ADDRESS_LOW_OFFSET (0x00001c58)
> +#define MPI3_SYSIF_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00001c5c)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_OFFSET (0x00001c60)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_MASK (0x00000030)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_1BYTE (0x00000000)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_2BYTES (0x00000010)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_4BYTES (0x00000020)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_8BYTES (0x00000030)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_RESET (0x00000004)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_MASK (0x00000002)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_READ (0x00000000)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_WRITE (0x00000002)
> +#define MPI3_SYSIF_DIAG_RW_CONTROL_START (0x00000001)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_OFFSET (0x00001c62)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_MASK (0x0000000e)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_SUCCESS (0x00000000)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_INV_ADDR (0x00000002)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_ACC_ERR (0x00000004)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_PAR_ERR (0x00000006)
> +#define MPI3_SYSIF_DIAG_RW_STATUS_BUSY (0x00000001)
> +#define MPI3_SYSIF_SCRATCHPAD0_OFFSET (0x00001cf0)
> +#define MPI3_SYSIF_SCRATCHPAD1_OFFSET (0x00001cf4)
> +#define MPI3_SYSIF_SCRATCHPAD2_OFFSET (0x00001cf8)
> +#define MPI3_SYSIF_SCRATCHPAD3_OFFSET (0x00001cfc)
> +#define MPI3_SYSIF_DEVICE_ASSIGNED_REGS_OFFSET (0x00002000)
> +#define MPI3_SYSIF_DIAG_SAVE_TIMEOUT (60)
> +struct _mpi3_default_reply_descriptor {
> + __le32 descriptor_type_dependent1[2];
> + __le16 request_queue_ci;
> + __le16 request_queue_id;
> + __le16 descriptor_type_dependent2;
> + __le16 reply_flags;
> +};
> +
> +#define MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK (0x0001)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK (0xf000)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY (0x0000)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS (0x1000)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_TARGET_COMMAND_BUFFER (0x2000)
> +#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS (0x3000)
> +struct _mpi3_address_reply_descriptor {
> + __le64 reply_frame_address;
> + __le16 request_queue_ci;
> + __le16 request_queue_id;
> + __le16 reserved0c;
> + __le16 reply_flags;
> +};
> +
> +struct _mpi3_success_reply_descriptor {
> + __le32 reserved00[2];
> + __le16 request_queue_ci;
> + __le16 request_queue_id;
> + __le16 host_tag;
> + __le16 reply_flags;
> +};
> +
> +struct _mpi3_target_command_buffer_reply_descriptor {
> + __le32 reserved00;
> + __le16 initiator_dev_handle;
> + u8 phy_num;
> + u8 reserved07;
> + __le16 request_queue_ci;
> + __le16 request_queue_id;
> + __le16 io_index;
> + __le16 reply_flags;
> +};
> +
> +struct _mpi3_status_reply_descriptor {
> + __le16 ioc_status;
> + __le16 reserved02;
> + __le32 ioc_log_info;
> + __le16 request_queue_ci;
> + __le16 request_queue_id;
> + __le16 host_tag;
> + __le16 reply_flags;
> +};
> +
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL (0x8000)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK (0x7fff)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_MASK (0xf0000000)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_NO_INFO (0x00000000)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_SAS (0x30000000)
> +#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_DATA_MASK (0x0fffffff)
> +union _mpi3_reply_descriptors_union {
> + struct _mpi3_default_reply_descriptor default_reply;
> + struct _mpi3_address_reply_descriptor address_reply;
> + struct _mpi3_success_reply_descriptor success;
> + struct _mpi3_target_command_buffer_reply_descriptor target_command_buffer;
> + struct _mpi3_status_reply_descriptor status;
> + __le32 words[4];
> +};
> +
> +struct _mpi3_sge_common {
> + __le64 address;
> + __le32 length;
> + u8 reserved0c[3];
> + u8 flags;
> +};
> +
> +struct _mpi3_sge_bit_bucket {
> + __le64 reserved00;
> + __le32 length;
> + u8 reserved0c[3];
> + u8 flags;
> +};
> +
> +struct _mpi3_sge_extended_eedp {
> + u8 user_data_size;
> + u8 reserved01;
> + __le16 eedp_flags;
> + __le32 secondary_reference_tag;
> + __le16 secondary_application_tag;
> + __le16 application_tag_translation_mask;
> + __le16 reserved0c;
> + u8 extended_operation;
> + u8 flags;
> +};
> +
> +union _mpi3_sge_union {
> + struct _mpi3_sge_common simple;
> + struct _mpi3_sge_common chain;
> + struct _mpi3_sge_common last_chain;
> + struct _mpi3_sge_bit_bucket bit_bucket;
> + struct _mpi3_sge_extended_eedp eedp;
> + __le32 words[4];
> +};
> +
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_MASK (0xf0)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE (0x00)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_BIT_BUCKET (0x10)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_CHAIN (0x20)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN (0x30)
> +#define MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED (0xf0)
> +#define MPI3_SGE_FLAGS_END_OF_LIST (0x08)
> +#define MPI3_SGE_FLAGS_END_OF_BUFFER (0x04)
> +#define MPI3_SGE_FLAGS_DLAS_MASK (0x03)
> +#define MPI3_SGE_FLAGS_DLAS_SYSTEM (0x00)
> +#define MPI3_SGE_FLAGS_DLAS_IOC_DDR (0x01)
> +#define MPI3_SGE_FLAGS_DLAS_IOC_CTL (0x02)
> +#define MPI3_SGE_EXT_OPER_EEDP (0x00)
> +#define MPI3_EEDPFLAGS_INCR_PRI_REF_TAG (0x8000)
> +#define MPI3_EEDPFLAGS_INCR_SEC_REF_TAG (0x4000)
> +#define MPI3_EEDPFLAGS_INCR_PRI_APP_TAG (0x2000)
> +#define MPI3_EEDPFLAGS_INCR_SEC_APP_TAG (0x1000)
> +#define MPI3_EEDPFLAGS_ESC_PASSTHROUGH (0x0800)
> +#define MPI3_EEDPFLAGS_CHK_REF_TAG (0x0400)
> +#define MPI3_EEDPFLAGS_CHK_APP_TAG (0x0200)
> +#define MPI3_EEDPFLAGS_CHK_GUARD (0x0100)
> +#define MPI3_EEDPFLAGS_ESC_MODE_MASK (0x00c0)
> +#define MPI3_EEDPFLAGS_ESC_MODE_DO_NOT_DISABLE (0x0040)
> +#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_DISABLE (0x0080)
> +#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_REFTAG_DISABLE (0x00c0)
> +#define MPI3_EEDPFLAGS_HOST_GUARD_MASK (0x0030)
> +#define MPI3_EEDPFLAGS_HOST_GUARD_T10_CRC (0x0000)
> +#define MPI3_EEDPFLAGS_HOST_GUARD_IP_CHKSUM (0x0010)
> +#define MPI3_EEDPFLAGS_HOST_GUARD_OEM_SPECIFIC (0x0020)
> +#define MPI3_EEDPFLAGS_PT_REF_TAG (0x0008)
> +#define MPI3_EEDPFLAGS_EEDP_OP_MASK (0x0007)
> +#define MPI3_EEDPFLAGS_EEDP_OP_NOOP (0x0000)
> +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK (0x0001)
> +#define MPI3_EEDPFLAGS_EEDP_OP_STRIP (0x0002)
> +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REMOVE (0x0003)
> +#define MPI3_EEDPFLAGS_EEDP_OP_INSERT (0x0004)
> +#define MPI3_EEDPFLAGS_EEDP_OP_REPLACE (0x0006)
> +#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REGEN (0x0007)
> +#define MPI3_EEDP_UDS_512 (0x01)
> +#define MPI3_EEDP_UDS_520 (0x02)
> +#define MPI3_EEDP_UDS_4080 (0x03)
> +#define MPI3_EEDP_UDS_4088 (0x04)
> +#define MPI3_EEDP_UDS_4096 (0x05)
> +#define MPI3_EEDP_UDS_4104 (0x06)
> +#define MPI3_EEDP_UDS_4160 (0x07)
> +struct _mpi3_request_header {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 change_count;
> + __le16 function_dependent;
> +};
> +
> +struct _mpi3_default_reply {
> + __le16 host_tag;
> + u8 ioc_use_only02;
> + u8 function;
> + __le16 ioc_use_only04;
> + u8 ioc_use_only06;
> + u8 msg_flags;
> + __le16 ioc_use_only08;
> + __le16 ioc_status;
> + __le32 ioc_log_info;
> +};
> +
> +#define MPI3_HOST_TAG_INVALID (0xffff)
> +#define MPI3_FUNCTION_IOC_FACTS (0x01)
> +#define MPI3_FUNCTION_IOC_INIT (0x02)
> +#define MPI3_FUNCTION_PORT_ENABLE (0x03)
> +#define MPI3_FUNCTION_EVENT_NOTIFICATION (0x04)
> +#define MPI3_FUNCTION_EVENT_ACK (0x05)
> +#define MPI3_FUNCTION_CI_DOWNLOAD (0x06)
> +#define MPI3_FUNCTION_CI_UPLOAD (0x07)
> +#define MPI3_FUNCTION_IO_UNIT_CONTROL (0x08)
> +#define MPI3_FUNCTION_PERSISTENT_EVENT_LOG (0x09)
> +#define MPI3_FUNCTION_MGMT_PASSTHROUGH (0x0a)
> +#define MPI3_FUNCTION_CONFIG (0x10)
> +#define MPI3_FUNCTION_SCSI_IO (0x20)
> +#define MPI3_FUNCTION_SCSI_TASK_MGMT (0x21)
> +#define MPI3_FUNCTION_SMP_PASSTHROUGH (0x22)
> +#define MPI3_FUNCTION_NVME_ENCAPSULATED (0x24)
> +#define MPI3_FUNCTION_TARGET_ASSIST (0x30)
> +#define MPI3_FUNCTION_TARGET_STATUS_SEND (0x31)
> +#define MPI3_FUNCTION_TARGET_MODE_ABORT (0x32)
> +#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_BASE (0x33)
> +#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_LIST (0x34)
> +#define MPI3_FUNCTION_CREATE_REQUEST_QUEUE (0x70)
> +#define MPI3_FUNCTION_DELETE_REQUEST_QUEUE (0x71)
> +#define MPI3_FUNCTION_CREATE_REPLY_QUEUE (0x72)
> +#define MPI3_FUNCTION_DELETE_REPLY_QUEUE (0x73)
> +#define MPI3_FUNCTION_TOOLBOX (0x80)
> +#define MPI3_FUNCTION_DIAG_BUFFER_POST (0x81)
> +#define MPI3_FUNCTION_DIAG_BUFFER_MANAGE (0x82)
> +#define MPI3_FUNCTION_DIAG_BUFFER_UPLOAD (0x83)
> +#define MPI3_FUNCTION_MIN_IOC_USE_ONLY (0xc0)
> +#define MPI3_FUNCTION_MAX_IOC_USE_ONLY (0xef)
> +#define MPI3_FUNCTION_MIN_PRODUCT_SPECIFIC (0xf0)
> +#define MPI3_FUNCTION_MAX_PRODUCT_SPECIFIC (0xff)
> +#define MPI3_IOCSTATUS_LOG_INFO_AVAIL_MASK (0x8000)
> +#define MPI3_IOCSTATUS_LOG_INFO_AVAILABLE (0x8000)
> +#define MPI3_IOCSTATUS_STATUS_MASK (0x7fff)
> +#define MPI3_IOCSTATUS_SUCCESS (0x0000)
> +#define MPI3_IOCSTATUS_INVALID_FUNCTION (0x0001)
> +#define MPI3_IOCSTATUS_BUSY (0x0002)
> +#define MPI3_IOCSTATUS_INVALID_SGL (0x0003)
> +#define MPI3_IOCSTATUS_INTERNAL_ERROR (0x0004)
> +#define MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
> +#define MPI3_IOCSTATUS_INVALID_FIELD (0x0007)
> +#define MPI3_IOCSTATUS_INVALID_STATE (0x0008)
> +#define MPI3_IOCSTATUS_INSUFFICIENT_POWER (0x000a)
> +#define MPI3_IOCSTATUS_INVALID_CHANGE_COUNT (0x000b)
> +#define MPI3_IOCSTATUS_FAILURE (0x001f)
> +#define MPI3_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
> +#define MPI3_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
> +#define MPI3_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
> +#define MPI3_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
> +#define MPI3_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
> +#define MPI3_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
> +#define MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
> +#define MPI3_IOCSTATUS_SCSI_TM_NOT_SUPPORTED (0x0041)
> +#define MPI3_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
> +#define MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
> +#define MPI3_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
> +#define MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
> +#define MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
> +#define MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
> +#define MPI3_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
> +#define MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
> +#define MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004a)
> +#define MPI3_IOCSTATUS_SCSI_IOC_TERMINATED (0x004b)
> +#define MPI3_IOCSTATUS_SCSI_EXT_TERMINATED (0x004c)
> +#define MPI3_IOCSTATUS_EEDP_GUARD_ERROR (0x004d)
> +#define MPI3_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004e)
> +#define MPI3_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004f)
> +#define MPI3_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
> +#define MPI3_IOCSTATUS_TARGET_ABORTED (0x0063)
> +#define MPI3_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
> +#define MPI3_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
> +#define MPI3_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006a)
> +#define MPI3_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006d)
> +#define MPI3_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006e)
> +#define MPI3_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006f)
> +#define MPI3_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
> +#define MPI3_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
> +#define MPI3_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
> +#define MPI3_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
> +#define MPI3_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00a0)
> +#define MPI3_IOCSTATUS_CI_UNSUPPORTED (0x00b0)
> +#define MPI3_IOCSTATUS_CI_UPDATE_SEQUENCE (0x00b1)
> +#define MPI3_IOCSTATUS_CI_VALIDATION_FAILED (0x00b2)
> +#define MPI3_IOCSTATUS_CI_UPDATE_PENDING (0x00b3)
> +#define MPI3_IOCSTATUS_SECURITY_KEY_REQUIRED (0x00c0)
> +#define MPI3_IOCSTATUS_INVALID_QUEUE_ID (0x0f00)
> +#define MPI3_IOCSTATUS_INVALID_QUEUE_SIZE (0x0f01)
> +#define MPI3_IOCSTATUS_INVALID_MSIX_VECTOR (0x0f02)
> +#define MPI3_IOCSTATUS_INVALID_REPLY_QUEUE_ID (0x0f03)
> +#define MPI3_IOCSTATUS_INVALID_QUEUE_DELETION (0x0f04)
> +#define MPI3_IOCLOGINFO_TYPE_MASK (0xf0000000)
> +#define MPI3_IOCLOGINFO_TYPE_SHIFT (28)
> +#define MPI3_IOCLOGINFO_TYPE_NONE (0x0)
> +#define MPI3_IOCLOGINFO_TYPE_SAS (0x3)
> +#define MPI3_IOCLOGINFO_LOG_DATA_MASK (0x0fffffff)
> +#endif
> --
> 2.18.1
>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
--
Himanshu Madhani Oracle Linux Engineering
^ permalink raw reply [flat|nested] 38+ messages in thread* RE: [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig
2021-05-14 16:18 ` Himanshu Madhani
@ 2021-05-17 15:52 ` Kashyap Desai
0 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-17 15:52 UTC (permalink / raw)
To: Bart Van Assche, hch
Cc: linux-scsi, James E.J. Bottomley, Martin Petersen, Steve Hagan,
Peter Rivera, mpi3mr-drvr-developers, Sathya Prakash Veerichetty,
thenzl, Hannes Reinecke, Himanshu Madhani
[-- Attachment #1: Type: text/plain, Size: 695 bytes --]
> > On May 13, 2021, at 3:35 AM, Kashyap Desai
> <kashyap.desai@broadcom.com> wrote:
> >
> > This adds the Kconfig and mpi30 headers.
> >
> > Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> >
> > Cc: sathya.prakash@broadcom.com
> > Cc: bvanassche@acm.org
> > Cc: thenzl@redhat.com
> > Cc: hare@suse.de
> > Cc: himanshu.madhani@oracle.com
> > Cc: hch@infradead.org
Noted reviewed-by tag from Hannes, Tomas and Himanshu. Thanks.
Hi Bart, Christoph -
In V5 submission, I have addressed your feedback. Now, MPI headers are
compliant with Linux kernel coding guidelines.
Hannes, Tomas and Himanshu reviewed and they are OK with V5 changes. Can
you provide your feedback. ?
Kashyap
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig
2021-05-13 8:35 ` [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig Kashyap Desai
` (2 preceding siblings ...)
2021-05-14 16:18 ` Himanshu Madhani
@ 2021-05-18 7:39 ` Christoph Hellwig
2021-05-19 14:58 ` Kashyap Desai
3 siblings, 1 reply; 38+ messages in thread
From: Christoph Hellwig @ 2021-05-18 7:39 UTC (permalink / raw)
To: Kashyap Desai
Cc: linux-scsi, jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash, bvanassche, thenzl, hare,
himanshu.madhani, hch
> + help
> + This driver supports Broadcom's Unified MPI3 based Storage & RAID Controllers.
Overly long line here.
> +#ifndef MPI30_API_H
> +#define MPI30_API_H 1
> +#include "mpi30_transport.h"
> +#include "mpi30_image.h"
> +#include "mpi30_init.h"
> +#include "mpi30_ioc.h"
> +#endif
Just including the four headers where needed directly would make more
sense to me than this meta-header.
> + * Name: mpi30_image.h
We generally do not add comments like this. It does not add any value
and gets stale very quickly.
> + * Creation Date: 04/02/2018
> + * Version: 03.00.00
No need for this information either. If you important from a specific
internal version this is something that should go into the commit log.
> +struct _mpi3_comp_image_version {
Please drop the leading underscore from the various type names.
^ permalink raw reply [flat|nested] 38+ messages in thread* RE: [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig
2021-05-18 7:39 ` Christoph Hellwig
@ 2021-05-19 14:58 ` Kashyap Desai
0 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-19 14:58 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-scsi, jejb, martin.petersen, Steve Hagan, Peter Rivera,
mpi3mr-drvr-developers, Sathya Prakash Veerichetty, bvanassche,
thenzl, hare, himanshu.madhani
[-- Attachment #1: Type: text/plain, Size: 1714 bytes --]
> -----Original Message-----
> From: Christoph Hellwig [mailto:hch@infradead.org]
> Sent: Tuesday, May 18, 2021 1:09 PM
> To: Kashyap Desai <kashyap.desai@broadcom.com>
> Cc: linux-scsi@vger.kernel.org; jejb@linux.ibm.com;
> martin.petersen@oracle.com; steve.hagan@broadcom.com;
> peter.rivera@broadcom.com; mpi3mr-linuxdrv.pdl@broadcom.com;
> sathya.prakash@broadcom.com; bvanassche@acm.org; thenzl@redhat.com;
> hare@suse.de; himanshu.madhani@oracle.com; hch@infradead.org
> Subject: Re: [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and
Kconfig
>
> > + help
> > + This driver supports Broadcom's Unified MPI3 based Storage & RAID
> Controllers.
>
> Overly long line here.
Hi Christoph -
Will use new string " MPI3 based Storage & RAID Controllers Driver"
>
> > +#ifndef MPI30_API_H
> > +#define MPI30_API_H 1
> > +#include "mpi30_transport.h"
> > +#include "mpi30_image.h"
> > +#include "mpi30_init.h"
> > +#include "mpi30_ioc.h"
> > +#endif
>
> Just including the four headers where needed directly would make more
sense
> to me than this meta-header.
I will handle this in V6 submission.
>
> > + * Name: mpi30_image.h
>
> We generally do not add comments like this. It does not add any value
and
> gets stale very quickly.
>
> > + * Creation Date: 04/02/2018
> > + * Version: 03.00.00
>
> No need for this information either. If you important from a specific
internal
> version this is something that should go into the commit log.
I will handle this in V6 submission. I will remove all history from
Copyright section.
>
> > +struct _mpi3_comp_image_version {
>
> Please drop the leading underscore from the various type names.
I will handle this in V6 submission.
Kashyap
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 02/24] mpi3mr: base driver code
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-14 14:43 ` Tomas Henzl
2021-05-14 20:16 ` Himanshu Madhani
2021-05-13 8:35 ` [PATCH v5 03/24] mpi3mr: create operational request and reply queue pair Kashyap Desai
` (21 subsequent siblings)
23 siblings, 2 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash, bvanassche,
hare, thenzl, himanshu.madhani
[-- Attachment #1: Type: text/plain, Size: 83354 bytes --]
This patch covers basic pci device driver requirements -
device probe, memory allocation, mapping system registers,
allocate irq lines etc.
Source is managed in mainly three different files.
mpi3mr_fw.c - Keep common code which interact with underlying fw/hw.
mpi3mr_os.c - Keep common code which interact with scsi midlayer.
mpi3mr_app.c - Keep common code which interact with application/ioctl.
This is currently work in progress.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: sathya.prakash@broadcom.com
Cc: bvanassche@acm.org
Cc: hare@suse.de
Cc: thenzl@redhat.com
Cc: himanshu.madhani@oracle.com
---
drivers/scsi/mpi3mr/Makefile | 4 +
drivers/scsi/mpi3mr/mpi3mr.h | 525 ++++++++
drivers/scsi/mpi3mr/mpi3mr_debug.h | 60 +
drivers/scsi/mpi3mr/mpi3mr_fw.c | 1805 ++++++++++++++++++++++++++++
drivers/scsi/mpi3mr/mpi3mr_os.c | 364 ++++++
5 files changed, 2758 insertions(+)
create mode 100644 drivers/scsi/mpi3mr/Makefile
create mode 100644 drivers/scsi/mpi3mr/mpi3mr.h
create mode 100644 drivers/scsi/mpi3mr/mpi3mr_debug.h
create mode 100644 drivers/scsi/mpi3mr/mpi3mr_fw.c
create mode 100644 drivers/scsi/mpi3mr/mpi3mr_os.c
diff --git a/drivers/scsi/mpi3mr/Makefile b/drivers/scsi/mpi3mr/Makefile
new file mode 100644
index 000000000000..7c2063e04c81
--- /dev/null
+++ b/drivers/scsi/mpi3mr/Makefile
@@ -0,0 +1,4 @@
+# mpi3mr makefile
+obj-m += mpi3mr.o
+mpi3mr-y += mpi3mr_os.o \
+ mpi3mr_fw.o \
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
new file mode 100644
index 000000000000..e33bb145204d
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -0,0 +1,525 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Driver for Broadcom MPI3 Storage Controllers
+ *
+ * Copyright (C) 2017-2021 Broadcom Inc.
+ * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com)
+ *
+ */
+
+#ifndef MPI3MR_H_INCLUDED
+#define MPI3MR_H_INCLUDED
+
+#include <linux/blkdev.h>
+#include <linux/blk-mq.h>
+#include <linux/blk-mq-pci.h>
+#include <linux/delay.h>
+#include <linux/dmapool.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/utsname.h>
+#include <linux/version.h>
+#include <linux/workqueue.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+#include "mpi/mpi30_api.h"
+#include "mpi3mr_debug.h"
+
+/* Global list and lock for storing multiple adapters managed by the driver */
+extern spinlock_t mrioc_list_lock;
+extern struct list_head mrioc_list;
+
+#define MPI3MR_DRIVER_VERSION "00.255.45.01"
+#define MPI3MR_DRIVER_RELDATE "12-December-2020"
+
+#define MPI3MR_DRIVER_NAME "mpi3mr"
+#define MPI3MR_DRIVER_LICENSE "GPL"
+#define MPI3MR_DRIVER_AUTHOR "Broadcom Inc. <mpi3mr-linuxdrv.pdl@broadcom.com>"
+#define MPI3MR_DRIVER_DESC "MPI3 Storage Controller Device Driver"
+
+#define MPI3MR_NAME_LENGTH 32
+#define IOCNAME "%s: "
+
+/* Definitions for internal SGL and Chain SGL buffers */
+#define MPI3MR_PAGE_SIZE_4K 4096
+#define MPI3MR_SG_DEPTH (MPI3MR_PAGE_SIZE_4K / sizeof(struct _mpi3_sge_common))
+
+/* Definitions for MAX values for shost */
+#define MPI3MR_MAX_CMDS_LUN 7
+#define MPI3MR_MAX_CDB_LENGTH 32
+
+/* Admin queue management definitions */
+#define MPI3MR_ADMIN_REQ_Q_SIZE (2 * MPI3MR_PAGE_SIZE_4K)
+#define MPI3MR_ADMIN_REPLY_Q_SIZE (4 * MPI3MR_PAGE_SIZE_4K)
+#define MPI3MR_ADMIN_REQ_FRAME_SZ 128
+#define MPI3MR_ADMIN_REPLY_FRAME_SZ 16
+
+
+/* Reserved Host Tag definitions */
+#define MPI3MR_HOSTTAG_INVALID 0xFFFF
+#define MPI3MR_HOSTTAG_INITCMDS 1
+#define MPI3MR_HOSTTAG_IOCTLCMDS 2
+#define MPI3MR_HOSTTAG_BLK_TMS 5
+
+#define MPI3MR_NUM_DEVRMCMD 1
+#define MPI3MR_HOSTTAG_DEVRMCMD_MIN (MPI3MR_HOSTTAG_BLK_TMS + 1)
+#define MPI3MR_HOSTTAG_DEVRMCMD_MAX (MPI3MR_HOSTTAG_DEVRMCMD_MIN + \
+ MPI3MR_NUM_DEVRMCMD - 1)
+
+#define MPI3MR_INTERNAL_CMDS_RESVD MPI3MR_HOSTTAG_DEVRMCMD_MAX
+
+/* Reduced resource count definition for crash kernel */
+#define MPI3MR_HOST_IOS_KDUMP 128
+
+/* command/controller interaction timeout definitions in seconds */
+#define MPI3MR_INTADMCMD_TIMEOUT 10
+#define MPI3MR_RESETTM_TIMEOUT 30
+#define MPI3MR_DEFAULT_SHUTDOWN_TIME 120
+
+#define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */
+
+/* Internal admin command state definitions*/
+#define MPI3MR_CMD_NOTUSED 0x8000
+#define MPI3MR_CMD_COMPLETE 0x0001
+#define MPI3MR_CMD_PENDING 0x0002
+#define MPI3MR_CMD_REPLY_VALID 0x0004
+#define MPI3MR_CMD_RESET 0x0008
+
+/* Definitions for Event replies and sense buffer allocated per controller */
+#define MPI3MR_NUM_EVT_REPLIES 64
+#define MPI3MR_SENSEBUF_SZ 256
+#define MPI3MR_SENSEBUF_FACTOR 3
+#define MPI3MR_CHAINBUF_FACTOR 3
+
+/* Invalid target device handle */
+#define MPI3MR_INVALID_DEV_HANDLE 0xFFFF
+
+/* Controller Reset related definitions */
+#define MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT 5
+#define MPI3MR_MAX_RESET_RETRY_COUNT 3
+
+/* ResponseCode definitions */
+#define MPI3MR_RI_MASK_RESPCODE (0x000000FF)
+#define MPI3MR_RSP_TM_COMPLETE 0x00
+#define MPI3MR_RSP_INVALID_FRAME 0x02
+#define MPI3MR_RSP_TM_NOT_SUPPORTED 0x04
+#define MPI3MR_RSP_TM_FAILED 0x05
+#define MPI3MR_RSP_TM_SUCCEEDED 0x08
+#define MPI3MR_RSP_TM_INVALID_LUN 0x09
+#define MPI3MR_RSP_TM_OVERLAPPED_TAG 0x0A
+#define MPI3MR_RSP_IO_QUEUED_ON_IOC \
+ MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC
+
+/* SGE Flag definition */
+#define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
+ (MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
+ MPI3_SGE_FLAGS_END_OF_LIST)
+
+/* IOC State definitions */
+enum mpi3mr_iocstate {
+ MRIOC_STATE_READY = 1,
+ MRIOC_STATE_RESET,
+ MRIOC_STATE_FAULT,
+ MRIOC_STATE_BECOMING_READY,
+ MRIOC_STATE_RESET_REQUESTED,
+ MRIOC_STATE_UNRECOVERABLE,
+};
+
+/* Reset reason code definitions*/
+enum mpi3mr_reset_reason {
+ MPI3MR_RESET_FROM_BRINGUP = 1,
+ MPI3MR_RESET_FROM_FAULT_WATCH = 2,
+ MPI3MR_RESET_FROM_IOCTL = 3,
+ MPI3MR_RESET_FROM_EH_HOS = 4,
+ MPI3MR_RESET_FROM_TM_TIMEOUT = 5,
+ MPI3MR_RESET_FROM_IOCTL_TIMEOUT = 6,
+ MPI3MR_RESET_FROM_MUR_FAILURE = 7,
+ MPI3MR_RESET_FROM_CTLR_CLEANUP = 8,
+ MPI3MR_RESET_FROM_CIACTIV_FAULT = 9,
+ MPI3MR_RESET_FROM_PE_TIMEOUT = 10,
+ MPI3MR_RESET_FROM_TSU_TIMEOUT = 11,
+ MPI3MR_RESET_FROM_DELREQQ_TIMEOUT = 12,
+ MPI3MR_RESET_FROM_DELREPQ_TIMEOUT = 13,
+ MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT = 14,
+ MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT = 15,
+ MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT = 16,
+ MPI3MR_RESET_FROM_IOCINIT_TIMEOUT = 17,
+ MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT = 18,
+ MPI3MR_RESET_FROM_EVTACK_TIMEOUT = 19,
+ MPI3MR_RESET_FROM_CIACTVRST_TIMER = 20,
+ MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT = 21,
+};
+
+/**
+ * struct mpi3mr_compimg_ver - replica of component image
+ * version defined in mpi30_image.h in host endianness
+ *
+ */
+struct mpi3mr_compimg_ver {
+ u16 build_num;
+ u16 cust_id;
+ u8 ph_minor;
+ u8 ph_major;
+ u8 gen_minor;
+ u8 gen_major;
+};
+
+/**
+ * struct mpi3mr_ioc_facs - replica of component image version
+ * defined in mpi30_ioc.h in host endianness
+ *
+ */
+struct mpi3mr_ioc_facts {
+ u32 ioc_capabilities;
+ struct mpi3mr_compimg_ver fw_ver;
+ u32 mpi_version;
+ u16 max_reqs;
+ u16 product_id;
+ u16 op_req_sz;
+ u16 reply_sz;
+ u16 exceptions;
+ u16 max_perids;
+ u16 max_pds;
+ u16 max_sasexpanders;
+ u16 max_sasinitiators;
+ u16 max_enclosures;
+ u16 max_pcie_switches;
+ u16 max_nvme;
+ u16 max_vds;
+ u16 max_hpds;
+ u16 max_advhpds;
+ u16 max_raidpds;
+ u16 min_devhandle;
+ u16 max_devhandle;
+ u16 max_op_req_q;
+ u16 max_op_reply_q;
+ u16 shutdown_timeout;
+ u8 ioc_num;
+ u8 who_init;
+ u16 max_msix_vectors;
+ u8 personality;
+ u8 dma_mask;
+ u8 protocol_flags;
+ u8 sge_mod_mask;
+ u8 sge_mod_value;
+ u8 sge_mod_shift;
+};
+
+/**
+ * struct op_req_qinfo - Operational Request Queue Information
+ *
+ * @ci: consumer index
+ * @pi: producer index
+ */
+struct op_req_qinfo {
+ u16 ci;
+ u16 pi;
+};
+
+/**
+ * struct op_reply_qinfo - Operational Reply Queue Information
+ *
+ * @ci: consumer index
+ * @qid: Queue Id starting from 1
+ */
+struct op_reply_qinfo {
+ u16 ci;
+ u16 qid;
+};
+
+/**
+ * struct mpi3mr_intr_info - Interrupt cookie information
+ *
+ * @mrioc: Adapter instance reference
+ * @msix_index: MSIx index
+ * @op_reply_q: Associated operational reply queue
+ * @name: Dev name for the irq claiming device
+ */
+struct mpi3mr_intr_info {
+ struct mpi3mr_ioc *mrioc;
+ u16 msix_index;
+ struct op_reply_qinfo *op_reply_q;
+ char name[MPI3MR_NAME_LENGTH];
+};
+
+
+
+/**
+ * struct mpi3mr_drv_cmd - Internal command tracker
+ *
+ * @mutex: Command mutex
+ * @done: Completeor for wakeup
+ * @reply: Firmware reply for internal commands
+ * @sensebuf: Sensebuf for SCSI IO commands
+ * @state: Command State
+ * @dev_handle: Firmware handle for device specific commands
+ * @ioc_status: IOC status from the firmware
+ * @ioc_loginfo:IOC log info from the firmware
+ * @is_waiting: Is the command issued in block mode
+ * @retry_count: Retry count for retriable commands
+ * @host_tag: Host tag used by the command
+ * @callback: Callback for non blocking commands
+ */
+struct mpi3mr_drv_cmd {
+ struct mutex mutex;
+ struct completion done;
+ void *reply;
+ u8 *sensebuf;
+ u16 state;
+ u16 dev_handle;
+ u16 ioc_status;
+ u32 ioc_loginfo;
+ u8 is_waiting;
+ u8 retry_count;
+ u16 host_tag;
+
+ void (*callback)(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_drv_cmd *drv_cmd);
+};
+
+
+/**
+ * struct chain_element - memory descriptor structure to store
+ * virtual and dma addresses for chain elements.
+ *
+ * @addr: virtual address
+ * @dma_addr: dma address
+ */
+struct chain_element {
+ void *addr;
+ dma_addr_t dma_addr;
+};
+
+/**
+ * struct scmd_priv - SCSI command private data
+ *
+ * @host_tag: Host tag specific to operational queue
+ * @in_lld_scope: Command in LLD scope or not
+ * @scmd: SCSI Command pointer
+ * @req_q_idx: Operational request queue index
+ * @chain_idx: Chain frame index
+ * @mpi3mr_scsiio_req: MPI SCSI IO request
+ */
+struct scmd_priv {
+ u16 host_tag;
+ u8 in_lld_scope;
+ struct scsi_cmnd *scmd;
+ u16 req_q_idx;
+ int chain_idx;
+ u8 mpi3mr_scsiio_req[MPI3MR_ADMIN_REQ_FRAME_SZ];
+};
+
+/**
+ * struct mpi3mr_ioc - Adapter anchor structure stored in shost
+ * private data
+ *
+ * @list: List pointer
+ * @pdev: PCI device pointer
+ * @shost: Scsi_Host pointer
+ * @id: Controller ID
+ * @cpu_count: Number of online CPUs
+ * @name: Controller ASCII name
+ * @driver_name: Driver ASCII name
+ * @sysif_regs: System interface registers virtual address
+ * @sysif_regs_phys: System interface registers physical address
+ * @bars: PCI BARS
+ * @dma_mask: DMA mask
+ * @msix_count: Number of MSIX vectors used
+ * @intr_enabled: Is interrupts enabled
+ * @num_admin_req: Number of admin requests
+ * @admin_req_q_sz: Admin request queue size
+ * @admin_req_pi: Admin request queue producer index
+ * @admin_req_ci: Admin request queue consumer index
+ * @admin_req_base: Admin request queue base virtual address
+ * @admin_req_dma: Admin request queue base dma address
+ * @admin_req_lock: Admin queue access lock
+ * @num_admin_replies: Number of admin replies
+ * @admin_reply_q_sz: Admin reply queue size
+ * @admin_reply_ci: Admin reply queue consumer index
+ * @admin_reply_ephase:Admin reply queue expected phase
+ * @admin_reply_base: Admin reply queue base virtual address
+ * @admin_reply_dma: Admin reply queue base dma address
+ * @ready_timeout: Controller ready timeout
+ * @intr_info: Interrupt cookie pointer
+ * @intr_info_count: Number of interrupt cookies
+ * @num_queues: Number of operational queues
+ * @num_op_req_q: Number of operational request queues
+ * @req_qinfo: Operational request queue info pointer
+ * @num_op_reply_q: Number of operational reply queues
+ * @op_reply_qinfo: Operational reply queue info pointer
+ * @init_cmds: Command tracker for initialization commands
+ * @facts: Cached IOC facts data
+ * @op_reply_desc_sz: Operational reply descriptor size
+ * @num_reply_bufs: Number of reply buffers allocated
+ * @reply_buf_pool: Reply buffer pool
+ * @reply_buf: Reply buffer base virtual address
+ * @reply_buf_dma: Reply buffer DMA address
+ * @reply_buf_dma_max_address: Reply DMA address max limit
+ * @reply_free_qsz: Reply free queue size
+ * @reply_free_q_pool: Reply free queue pool
+ * @reply_free_q: Reply free queue base virtual address
+ * @reply_free_q_dma: Reply free queue base DMA address
+ * @reply_free_queue_lock: Reply free queue lock
+ * @reply_free_queue_host_index: Reply free queue host index
+ * @num_sense_bufs: Number of sense buffers
+ * @sense_buf_pool: Sense buffer pool
+ * @sense_buf: Sense buffer base virtual address
+ * @sense_buf_dma: Sense buffer base DMA address
+ * @sense_buf_q_sz: Sense buffer queue size
+ * @sense_buf_q_pool: Sense buffer queue pool
+ * @sense_buf_q: Sense buffer queue virtual address
+ * @sense_buf_q_dma: Sense buffer queue DMA address
+ * @sbq_lock: Sense buffer queue lock
+ * @sbq_host_index: Sense buffer queuehost index
+ * @is_driver_loading: Is driver still loading
+ * @max_host_ios: Maximum host I/O count
+ * @chain_buf_count: Chain buffer count
+ * @chain_buf_pool: Chain buffer pool
+ * @chain_sgl_list: Chain SGL list
+ * @chain_bitmap_sz: Chain buffer allocator bitmap size
+ * @chain_bitmap: Chain buffer allocator bitmap
+ * @reset_in_progress: Reset in progress flag
+ * @unrecoverable: Controller unrecoverable flag
+ * @logging_level: Controller debug logging level
+ * @current_event: Firmware event currently in process
+ * @driver_info: Driver, Kernel, OS information to firmware
+ * @change_count: Topology change count
+ */
+struct mpi3mr_ioc {
+ struct list_head list;
+ struct pci_dev *pdev;
+ struct Scsi_Host *shost;
+ u8 id;
+ int cpu_count;
+
+ char name[MPI3MR_NAME_LENGTH];
+ char driver_name[MPI3MR_NAME_LENGTH];
+
+ volatile struct _mpi3_sysif_registers __iomem *sysif_regs;
+ resource_size_t sysif_regs_phys;
+ int bars;
+ u64 dma_mask;
+
+ u16 msix_count;
+ u8 intr_enabled;
+
+ u16 num_admin_req;
+ u32 admin_req_q_sz;
+ u16 admin_req_pi;
+ u16 admin_req_ci;
+ void *admin_req_base;
+ dma_addr_t admin_req_dma;
+ spinlock_t admin_req_lock;
+
+ u16 num_admin_replies;
+ u32 admin_reply_q_sz;
+ u16 admin_reply_ci;
+ u8 admin_reply_ephase;
+ void *admin_reply_base;
+ dma_addr_t admin_reply_dma;
+
+ u32 ready_timeout;
+
+ struct mpi3mr_intr_info *intr_info;
+ u16 intr_info_count;
+
+ u16 num_queues;
+ u16 num_op_req_q;
+ struct op_req_qinfo *req_qinfo;
+
+ u16 num_op_reply_q;
+ struct op_reply_qinfo *op_reply_qinfo;
+
+ struct mpi3mr_drv_cmd init_cmds;
+ struct mpi3mr_ioc_facts facts;
+ u16 op_reply_desc_sz;
+
+ u32 num_reply_bufs;
+ struct dma_pool *reply_buf_pool;
+ u8 *reply_buf;
+ dma_addr_t reply_buf_dma;
+ dma_addr_t reply_buf_dma_max_address;
+
+ u16 reply_free_qsz;
+ struct dma_pool *reply_free_q_pool;
+ __le64 *reply_free_q;
+ dma_addr_t reply_free_q_dma;
+ spinlock_t reply_free_queue_lock;
+ u32 reply_free_queue_host_index;
+
+ u32 num_sense_bufs;
+ struct dma_pool *sense_buf_pool;
+ u8 *sense_buf;
+ dma_addr_t sense_buf_dma;
+
+ u16 sense_buf_q_sz;
+ struct dma_pool *sense_buf_q_pool;
+ __le64 *sense_buf_q;
+ dma_addr_t sense_buf_q_dma;
+ spinlock_t sbq_lock;
+ u32 sbq_host_index;
+
+ u8 is_driver_loading;
+
+ u16 max_host_ios;
+
+ u32 chain_buf_count;
+ struct dma_pool *chain_buf_pool;
+ struct chain_element *chain_sgl_list;
+ u16 chain_bitmap_sz;
+ void *chain_bitmap;
+
+ u8 reset_in_progress;
+ u8 unrecoverable;
+
+ int logging_level;
+
+ struct mpi3mr_fwevt *current_event;
+ struct _mpi3_driver_info_layout driver_info;
+ u16 change_count;
+};
+
+int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
+void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc);
+int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc);
+void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc);
+int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req,
+u16 admin_req_sz, u8 ignore_reset);
+void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length,
+ dma_addr_t dma_addr);
+void mpi3mr_build_zero_len_sge(void *paddr);
+void *mpi3mr_get_sensebuf_virt_addr(struct mpi3mr_ioc *mrioc,
+ dma_addr_t phys_addr);
+void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc,
+ dma_addr_t phys_addr);
+void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
+ u64 sense_buf_dma);
+
+void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc);
+void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc);
+
+int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
+ u32 reset_reason, u8 snapdump);
+void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc);
+void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc);
+
+enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc);
+
+#endif /*MPI3MR_H_INCLUDED*/
diff --git a/drivers/scsi/mpi3mr/mpi3mr_debug.h b/drivers/scsi/mpi3mr/mpi3mr_debug.h
new file mode 100644
index 000000000000..c085bb048d41
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi3mr_debug.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Driver for Broadcom MPI3 Storage Controllers
+ *
+ * Copyright (C) 2017-2021 Broadcom Inc.
+ * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com)
+ *
+ */
+
+#ifndef MPI3SAS_DEBUG_H_INCLUDED
+
+#define MPI3SAS_DEBUG_H_INCLUDED
+
+/*
+ * debug levels
+ */
+#define MPI3_DEBUG 0x00000001
+#define MPI3_DEBUG_MSG_FRAME 0x00000002
+#define MPI3_DEBUG_SG 0x00000004
+#define MPI3_DEBUG_EVENTS 0x00000008
+#define MPI3_DEBUG_EVENT_WORK_TASK 0x00000010
+#define MPI3_DEBUG_INIT 0x00000020
+#define MPI3_DEBUG_EXIT 0x00000040
+#define MPI3_DEBUG_FAIL 0x00000080
+#define MPI3_DEBUG_TM 0x00000100
+#define MPI3_DEBUG_REPLY 0x00000200
+#define MPI3_DEBUG_HANDSHAKE 0x00000400
+#define MPI3_DEBUG_CONFIG 0x00000800
+#define MPI3_DEBUG_DL 0x00001000
+#define MPI3_DEBUG_RESET 0x00002000
+#define MPI3_DEBUG_SCSI 0x00004000
+#define MPI3_DEBUG_IOCTL 0x00008000
+#define MPI3_DEBUG_CSMISAS 0x00010000
+#define MPI3_DEBUG_SAS 0x00020000
+#define MPI3_DEBUG_TRANSPORT 0x00040000
+#define MPI3_DEBUG_TASK_SET_FULL 0x00080000
+#define MPI3_DEBUG_TRIGGER_DIAG 0x00200000
+
+
+/*
+ * debug macros
+ */
+
+#define ioc_err(ioc, fmt, ...) \
+ pr_err("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_notice(ioc, fmt, ...) \
+ pr_notice("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_warn(ioc, fmt, ...) \
+ pr_warn("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_info(ioc, fmt, ...) \
+ pr_info("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+
+
+#define dbgprint(IOC, FMT, ...) \
+ do { \
+ if (IOC->logging_level & MPI3_DEBUG) \
+ pr_info("%s: " FMT, (IOC)->name, ##__VA_ARGS__); \
+ } while (0)
+
+#endif /* MPT3SAS_DEBUG_H_INCLUDED */
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
new file mode 100644
index 000000000000..ed782887eb37
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -0,0 +1,1805 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Broadcom MPI3 Storage Controllers
+ *
+ * Copyright (C) 2017-2021 Broadcom Inc.
+ * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com)
+ *
+ */
+
+#include "mpi3mr.h"
+#include <linux/io-64-nonatomic-lo-hi.h>
+
+#if defined(writeq) && defined(CONFIG_64BIT)
+static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr)
+{
+ writeq(b, addr);
+}
+#else
+static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr)
+{
+ __u64 data_out = b;
+
+ writel((u32)(data_out), addr);
+ writel((u32)(data_out >> 32), (addr + 4));
+}
+#endif
+
+static void mpi3mr_sync_irqs(struct mpi3mr_ioc *mrioc)
+{
+ u16 i, max_vectors;
+
+ max_vectors = mrioc->intr_info_count;
+
+ for (i = 0; i < max_vectors; i++)
+ synchronize_irq(pci_irq_vector(mrioc->pdev, i));
+}
+
+void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc)
+{
+ mrioc->intr_enabled = 0;
+ mpi3mr_sync_irqs(mrioc);
+}
+
+void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc)
+{
+ mrioc->intr_enabled = 1;
+}
+
+static void mpi3mr_cleanup_isr(struct mpi3mr_ioc *mrioc)
+{
+ u16 i;
+
+ mpi3mr_ioc_disable_intr(mrioc);
+
+ if (!mrioc->intr_info)
+ return;
+
+ for (i = 0; i < mrioc->intr_info_count; i++)
+ free_irq(pci_irq_vector(mrioc->pdev, i),
+ (mrioc->intr_info + i));
+
+ kfree(mrioc->intr_info);
+ mrioc->intr_info = NULL;
+ mrioc->intr_info_count = 0;
+ pci_free_irq_vectors(mrioc->pdev);
+}
+
+void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length,
+ dma_addr_t dma_addr)
+{
+ struct _mpi3_sge_common *sgel = paddr;
+
+ sgel->flags = flags;
+ sgel->length = cpu_to_le32(length);
+ sgel->address = cpu_to_le64(dma_addr);
+}
+
+void mpi3mr_build_zero_len_sge(void *paddr)
+{
+ u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST;
+
+ mpi3mr_add_sg_single(paddr, sgl_flags, 0, -1);
+}
+
+void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc,
+ dma_addr_t phys_addr)
+{
+ if (!phys_addr)
+ return NULL;
+
+ if ((phys_addr < mrioc->reply_buf_dma) ||
+ (phys_addr > mrioc->reply_buf_dma_max_address))
+ return NULL;
+
+ return mrioc->reply_buf + (phys_addr - mrioc->reply_buf_dma);
+}
+
+void *mpi3mr_get_sensebuf_virt_addr(struct mpi3mr_ioc *mrioc,
+ dma_addr_t phys_addr)
+{
+ if (!phys_addr)
+ return NULL;
+
+ return mrioc->sense_buf + (phys_addr - mrioc->sense_buf_dma);
+}
+
+static void mpi3mr_repost_reply_buf(struct mpi3mr_ioc *mrioc,
+ u64 reply_dma)
+{
+ u32 old_idx = 0;
+
+ spin_lock(&mrioc->reply_free_queue_lock);
+ old_idx = mrioc->reply_free_queue_host_index;
+ mrioc->reply_free_queue_host_index = (
+ (mrioc->reply_free_queue_host_index ==
+ (mrioc->reply_free_qsz - 1)) ? 0 :
+ (mrioc->reply_free_queue_host_index + 1));
+ mrioc->reply_free_q[old_idx] = cpu_to_le64(reply_dma);
+ writel(mrioc->reply_free_queue_host_index,
+ &mrioc->sysif_regs->reply_free_host_index);
+ spin_unlock(&mrioc->reply_free_queue_lock);
+}
+
+void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
+ u64 sense_buf_dma)
+{
+ u32 old_idx = 0;
+
+ spin_lock(&mrioc->sbq_lock);
+ old_idx = mrioc->sbq_host_index;
+ mrioc->sbq_host_index = ((mrioc->sbq_host_index ==
+ (mrioc->sense_buf_q_sz - 1)) ? 0 :
+ (mrioc->sbq_host_index + 1));
+ mrioc->sense_buf_q[old_idx] = cpu_to_le64(sense_buf_dma);
+ writel(mrioc->sbq_host_index,
+ &mrioc->sysif_regs->sense_buffer_free_host_index);
+ spin_unlock(&mrioc->sbq_lock);
+}
+
+static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_default_reply *def_reply)
+{
+ struct _mpi3_event_notification_reply *event_reply =
+ (struct _mpi3_event_notification_reply *)def_reply;
+
+ mrioc->change_count = le16_to_cpu(event_reply->ioc_change_count);
+}
+
+static struct mpi3mr_drv_cmd *
+mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag,
+ struct _mpi3_default_reply *def_reply)
+{
+ switch (host_tag) {
+ case MPI3MR_HOSTTAG_INITCMDS:
+ return &mrioc->init_cmds;
+ case MPI3MR_HOSTTAG_INVALID:
+ if (def_reply && def_reply->function ==
+ MPI3_FUNCTION_EVENT_NOTIFICATION)
+ mpi3mr_handle_events(mrioc, def_reply);
+ return NULL;
+ default:
+ break;
+ }
+
+ return NULL;
+}
+
+static void mpi3mr_process_admin_reply_desc(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_default_reply_descriptor *reply_desc, u64 *reply_dma)
+{
+ u16 reply_desc_type, host_tag = 0;
+ u16 ioc_status = MPI3_IOCSTATUS_SUCCESS;
+ u32 ioc_loginfo = 0;
+ struct _mpi3_status_reply_descriptor *status_desc;
+ struct _mpi3_address_reply_descriptor *addr_desc;
+ struct _mpi3_success_reply_descriptor *success_desc;
+ struct _mpi3_default_reply *def_reply = NULL;
+ struct mpi3mr_drv_cmd *cmdptr = NULL;
+ struct _mpi3_scsi_io_reply *scsi_reply;
+ u8 *sense_buf = NULL;
+
+ *reply_dma = 0;
+ reply_desc_type = le16_to_cpu(reply_desc->reply_flags) &
+ MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK;
+ switch (reply_desc_type) {
+ case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS:
+ status_desc = (struct _mpi3_status_reply_descriptor *)reply_desc;
+ host_tag = le16_to_cpu(status_desc->host_tag);
+ ioc_status = le16_to_cpu(status_desc->ioc_status);
+ if (ioc_status &
+ MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL)
+ ioc_loginfo = le32_to_cpu(status_desc->ioc_log_info);
+ ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK;
+ break;
+ case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY:
+ addr_desc = (struct _mpi3_address_reply_descriptor *)reply_desc;
+ *reply_dma = le64_to_cpu(addr_desc->reply_frame_address);
+ def_reply = mpi3mr_get_reply_virt_addr(mrioc, *reply_dma);
+ if (!def_reply)
+ goto out;
+ host_tag = le16_to_cpu(def_reply->host_tag);
+ ioc_status = le16_to_cpu(def_reply->ioc_status);
+ if (ioc_status &
+ MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL)
+ ioc_loginfo = le32_to_cpu(def_reply->ioc_log_info);
+ ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK;
+ if (def_reply->function == MPI3_FUNCTION_SCSI_IO) {
+ scsi_reply = (struct _mpi3_scsi_io_reply *)def_reply;
+ sense_buf = mpi3mr_get_sensebuf_virt_addr(mrioc,
+ le64_to_cpu(scsi_reply->sense_data_buffer_address));
+ }
+ break;
+ case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS:
+ success_desc = (struct _mpi3_success_reply_descriptor *)reply_desc;
+ host_tag = le16_to_cpu(success_desc->host_tag);
+ break;
+ default:
+ break;
+ }
+
+ cmdptr = mpi3mr_get_drv_cmd(mrioc, host_tag, def_reply);
+ if (cmdptr) {
+ if (cmdptr->state & MPI3MR_CMD_PENDING) {
+ cmdptr->state |= MPI3MR_CMD_COMPLETE;
+ cmdptr->ioc_loginfo = ioc_loginfo;
+ cmdptr->ioc_status = ioc_status;
+ cmdptr->state &= ~MPI3MR_CMD_PENDING;
+ if (def_reply) {
+ cmdptr->state |= MPI3MR_CMD_REPLY_VALID;
+ memcpy((u8 *)cmdptr->reply, (u8 *)def_reply,
+ mrioc->facts.reply_sz);
+ }
+ if (cmdptr->is_waiting) {
+ complete(&cmdptr->done);
+ cmdptr->is_waiting = 0;
+ } else if (cmdptr->callback)
+ cmdptr->callback(mrioc, cmdptr);
+ }
+ }
+out:
+ if (sense_buf)
+ mpi3mr_repost_sense_buf(mrioc,
+ le64_to_cpu(scsi_reply->sense_data_buffer_address));
+}
+
+static int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
+{
+ u32 exp_phase = mrioc->admin_reply_ephase;
+ u32 admin_reply_ci = mrioc->admin_reply_ci;
+ u32 num_admin_replies = 0;
+ u64 reply_dma = 0;
+ struct _mpi3_default_reply_descriptor *reply_desc;
+
+ reply_desc = (struct _mpi3_default_reply_descriptor *)mrioc->admin_reply_base +
+ admin_reply_ci;
+
+ if ((le16_to_cpu(reply_desc->reply_flags) &
+ MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase)
+ return 0;
+
+ do {
+ mrioc->admin_req_ci = le16_to_cpu(reply_desc->request_queue_ci);
+ mpi3mr_process_admin_reply_desc(mrioc, reply_desc, &reply_dma);
+ if (reply_dma)
+ mpi3mr_repost_reply_buf(mrioc, reply_dma);
+ num_admin_replies++;
+ if (++admin_reply_ci == mrioc->num_admin_replies) {
+ admin_reply_ci = 0;
+ exp_phase ^= 1;
+ }
+ reply_desc =
+ (struct _mpi3_default_reply_descriptor *)mrioc->admin_reply_base +
+ admin_reply_ci;
+ if ((le16_to_cpu(reply_desc->reply_flags) &
+ MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase)
+ break;
+ } while (1);
+
+ writel(admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci);
+ mrioc->admin_reply_ci = admin_reply_ci;
+ mrioc->admin_reply_ephase = exp_phase;
+
+ return num_admin_replies;
+}
+
+static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata)
+{
+ struct mpi3mr_intr_info *intr_info = privdata;
+ struct mpi3mr_ioc *mrioc;
+ u16 midx;
+ u32 num_admin_replies = 0;
+
+ if (!intr_info)
+ return IRQ_NONE;
+
+ mrioc = intr_info->mrioc;
+
+ if (!mrioc->intr_enabled)
+ return IRQ_NONE;
+
+ midx = intr_info->msix_index;
+
+ if (!midx)
+ num_admin_replies = mpi3mr_process_admin_reply_q(mrioc);
+
+ if (num_admin_replies)
+ return IRQ_HANDLED;
+ else
+ return IRQ_NONE;
+}
+
+static irqreturn_t mpi3mr_isr(int irq, void *privdata)
+{
+ struct mpi3mr_intr_info *intr_info = privdata;
+ int ret;
+
+ if (!intr_info)
+ return IRQ_NONE;
+
+ /* Call primary ISR routine */
+ ret = mpi3mr_isr_primary(irq, privdata);
+
+ return ret;
+}
+
+/**
+ * mpi3mr_isr_poll - Reply queue polling routine
+ * @irq: IRQ
+ * @privdata: Interrupt info
+ *
+ * poll for pending I/O completions in a loop until pending I/Os
+ * present or controller queue depth I/Os are processed.
+ *
+ * Return: IRQ_NONE or IRQ_HANDLED
+ */
+static irqreturn_t mpi3mr_isr_poll(int irq, void *privdata)
+{
+ return IRQ_HANDLED;
+}
+
+/**
+ * mpi3mr_request_irq - Request IRQ and register ISR
+ * @mrioc: Adapter instance reference
+ * @index: IRQ vector index
+ *
+ * Request threaded ISR with primary ISR and secondary
+ *
+ * Return: 0 on success and non zero on failures.
+ */
+static inline int mpi3mr_request_irq(struct mpi3mr_ioc *mrioc, u16 index)
+{
+ struct pci_dev *pdev = mrioc->pdev;
+ struct mpi3mr_intr_info *intr_info = mrioc->intr_info + index;
+ int retval = 0;
+
+ intr_info->mrioc = mrioc;
+ intr_info->msix_index = index;
+ intr_info->op_reply_q = NULL;
+
+ snprintf(intr_info->name, MPI3MR_NAME_LENGTH, "%s%d-msix%d",
+ mrioc->driver_name, mrioc->id, index);
+
+ retval = request_threaded_irq(pci_irq_vector(pdev, index), mpi3mr_isr,
+ mpi3mr_isr_poll, IRQF_SHARED, intr_info->name, intr_info);
+ if (retval) {
+ ioc_err(mrioc, "%s: Unable to allocate interrupt %d!\n",
+ intr_info->name, pci_irq_vector(pdev, index));
+ return retval;
+ }
+
+ return retval;
+}
+
+/**
+ * mpi3mr_setup_isr - Setup ISR for the controller
+ * @mrioc: Adapter instance reference
+ * @setup_one: Request one IRQ or more
+ *
+ * Allocate IRQ vectors and call mpi3mr_request_irq to setup ISR
+ *
+ * Return: 0 on success and non zero on failures.
+ */
+static int mpi3mr_setup_isr(struct mpi3mr_ioc *mrioc, u8 setup_one)
+{
+ unsigned int irq_flags = PCI_IRQ_MSIX;
+ u16 max_vectors = 0, i;
+ int retval = 0;
+ struct irq_affinity desc = { .pre_vectors = 1};
+
+ mpi3mr_cleanup_isr(mrioc);
+
+ if (setup_one || reset_devices)
+ max_vectors = 1;
+ else {
+ max_vectors =
+ min_t(int, mrioc->cpu_count + 1, mrioc->msix_count);
+
+ ioc_info(mrioc,
+ "MSI-X vectors supported: %d, no of cores: %d,",
+ mrioc->msix_count, mrioc->cpu_count);
+ ioc_info(mrioc,
+ "MSI-x vectors requested: %d\n", max_vectors);
+ }
+
+ irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES;
+
+ i = pci_alloc_irq_vectors_affinity(mrioc->pdev,
+ 1, max_vectors, irq_flags, &desc);
+ if (i <= 0) {
+ ioc_err(mrioc, "Cannot alloc irq vectors\n");
+ goto out_failed;
+ }
+ if (i != max_vectors) {
+ ioc_info(mrioc,
+ "allocated vectors (%d) are less than configured (%d)\n",
+ i, max_vectors);
+
+ max_vectors = i;
+ }
+ mrioc->intr_info = kzalloc(sizeof(struct mpi3mr_intr_info) * max_vectors,
+ GFP_KERNEL);
+ if (!mrioc->intr_info) {
+ retval = -1;
+ pci_free_irq_vectors(mrioc->pdev);
+ goto out_failed;
+ }
+ for (i = 0; i < max_vectors; i++) {
+ retval = mpi3mr_request_irq(mrioc, i);
+ if (retval) {
+ mrioc->intr_info_count = i;
+ goto out_failed;
+ }
+ }
+ mrioc->intr_info_count = max_vectors;
+ mpi3mr_ioc_enable_intr(mrioc);
+ return retval;
+out_failed:
+ mpi3mr_cleanup_isr(mrioc);
+
+ return retval;
+}
+
+static const struct {
+ enum mpi3mr_iocstate value;
+ char *name;
+} mrioc_states[] = {
+ { MRIOC_STATE_READY, "ready" },
+ { MRIOC_STATE_FAULT, "fault" },
+ { MRIOC_STATE_RESET, "reset" },
+ { MRIOC_STATE_BECOMING_READY, "becoming ready" },
+ { MRIOC_STATE_RESET_REQUESTED, "reset requested" },
+ { MRIOC_STATE_UNRECOVERABLE, "unrecoverable error" },
+};
+
+static const char *mpi3mr_iocstate_name(enum mpi3mr_iocstate mrioc_state)
+{
+ int i;
+ char *name = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(mrioc_states); i++) {
+ if (mrioc_states[i].value == mrioc_state) {
+ name = mrioc_states[i].name;
+ break;
+ }
+ }
+ return name;
+}
+
+/**
+ * mpi3mr_print_fault_info - Display fault information
+ * @mrioc: Adapter instance reference
+ *
+ * Display the controller fault information if there is a
+ * controller fault.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc)
+{
+ u32 ioc_status, code, code1, code2, code3;
+
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+
+ if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) {
+ code = readl(&mrioc->sysif_regs->fault);
+ code1 = readl(&mrioc->sysif_regs->fault_info[0]);
+ code2 = readl(&mrioc->sysif_regs->fault_info[1]);
+ code3 = readl(&mrioc->sysif_regs->fault_info[2]);
+
+ ioc_info(mrioc,
+ "fault code(0x%08X): Additional code: (0x%08X:0x%08X:0x%08X)\n",
+ code, code1, code2, code3);
+ }
+}
+
+/**
+ * mpi3mr_get_iocstate - Get IOC State
+ * @mrioc: Adapter instance reference
+ *
+ * Return a proper IOC state enum based on the IOC status and
+ * IOC configuration and unrcoverable state of the controller.
+ *
+ * Return: Current IOC state.
+ */
+enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc)
+{
+ u32 ioc_status, ioc_config;
+ u8 ready, enabled;
+
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+
+ if (mrioc->unrecoverable)
+ return MRIOC_STATE_UNRECOVERABLE;
+ if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)
+ return MRIOC_STATE_FAULT;
+
+ ready = (ioc_status & MPI3_SYSIF_IOC_STATUS_READY);
+ enabled = (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC);
+
+ if (ready && enabled)
+ return MRIOC_STATE_READY;
+ if ((!ready) && (!enabled))
+ return MRIOC_STATE_RESET;
+ if ((!ready) && (enabled))
+ return MRIOC_STATE_BECOMING_READY;
+
+ return MRIOC_STATE_RESET_REQUESTED;
+}
+
+/**
+ * mpi3mr_clear_reset_history - clear reset history
+ * @mrioc: Adapter instance reference
+ *
+ * Write the reset history bit in IOC status to clear the bit,
+ * if it is already set.
+ *
+ * Return: Nothing.
+ */
+static inline void mpi3mr_clear_reset_history(struct mpi3mr_ioc *mrioc)
+{
+ u32 ioc_status;
+
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ if (ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY)
+ writel(ioc_status, &mrioc->sysif_regs->ioc_status);
+}
+
+/**
+ * mpi3mr_issue_and_process_mur - Message unit Reset handler
+ * @mrioc: Adapter instance reference
+ * @reset_reason: Reset reason code
+ *
+ * Issue Message unit Reset to the controller and wait for it to
+ * be complete.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int mpi3mr_issue_and_process_mur(struct mpi3mr_ioc *mrioc,
+ u32 reset_reason)
+{
+ u32 ioc_config, timeout, ioc_status;
+ int retval = -1;
+
+ ioc_info(mrioc, "Issuing Message unit Reset(MUR)\n");
+ if (mrioc->unrecoverable) {
+ ioc_info(mrioc, "IOC is unrecoverable MUR not issued\n");
+ return retval;
+ }
+ mpi3mr_clear_reset_history(mrioc);
+ writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]);
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ ioc_config &= ~MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC;
+ writel(ioc_config, &mrioc->sysif_regs->ioc_configuration);
+
+ timeout = mrioc->ready_timeout * 10;
+ do {
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY)) {
+ mpi3mr_clear_reset_history(mrioc);
+ ioc_config =
+ readl(&mrioc->sysif_regs->ioc_configuration);
+ if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) ||
+ (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) ||
+ (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC))) {
+ retval = 0;
+ break;
+ }
+ }
+ msleep(100);
+ } while (--timeout);
+
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+
+ ioc_info(mrioc, "Base IOC Sts/Config after %s MUR is (0x%x)/(0x%x)\n",
+ (!retval) ? "successful" : "failed", ioc_status, ioc_config);
+ return retval;
+}
+
+/**
+ * mpi3mr_bring_ioc_ready - Bring controller to ready state
+ * @mrioc: Adapter instance reference
+ *
+ * Set Enable IOC bit in IOC configuration register and wait for
+ * the controller to become ready.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
+{
+ u32 ioc_config, timeout;
+ enum mpi3mr_iocstate current_state;
+
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ ioc_config |= MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC;
+ writel(ioc_config, &mrioc->sysif_regs->ioc_configuration);
+
+ timeout = mrioc->ready_timeout * 10;
+ do {
+ current_state = mpi3mr_get_iocstate(mrioc);
+ if (current_state == MRIOC_STATE_READY)
+ return 0;
+ msleep(100);
+ } while (--timeout);
+
+ return -1;
+}
+
+/**
+ * mpi3mr_set_diagsave - Set diag save bit for snapdump
+ * @mrioc: Adapter reference
+ *
+ * Set diag save bit in IOC configuration register to enable
+ * snapdump.
+ *
+ * Return: Nothing.
+ */
+static inline void mpi3mr_set_diagsave(struct mpi3mr_ioc *mrioc)
+{
+ u32 ioc_config;
+
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ ioc_config |= MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE;
+ writel(ioc_config, &mrioc->sysif_regs->ioc_configuration);
+}
+
+/**
+ * mpi3mr_issue_reset - Issue reset to the controller
+ * @mrioc: Adapter reference
+ * @reset_type: Reset type
+ * @reset_reason: Reset reason code
+ *
+ * TBD
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type,
+ u32 reset_reason)
+{
+ return 0;
+}
+
+/**
+ * mpi3mr_admin_request_post - Post request to admin queue
+ * @mrioc: Adapter reference
+ * @admin_req: MPI3 request
+ * @admin_req_sz: Request size
+ * @ignore_reset: Ignore reset in process
+ *
+ * Post the MPI3 request into admin request queue and
+ * inform the controller, if the queue is full return
+ * appropriate error.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req,
+ u16 admin_req_sz, u8 ignore_reset)
+{
+ u16 areq_pi = 0, areq_ci = 0, max_entries = 0;
+ int retval = 0;
+ unsigned long flags;
+ u8 *areq_entry;
+
+ if (mrioc->unrecoverable) {
+ ioc_err(mrioc, "%s : Unrecoverable controller\n", __func__);
+ return -EFAULT;
+ }
+
+ spin_lock_irqsave(&mrioc->admin_req_lock, flags);
+ areq_pi = mrioc->admin_req_pi;
+ areq_ci = mrioc->admin_req_ci;
+ max_entries = mrioc->num_admin_req;
+ if ((areq_ci == (areq_pi + 1)) || ((!areq_ci) &&
+ (areq_pi == (max_entries - 1)))) {
+ ioc_err(mrioc, "AdminReqQ full condition detected\n");
+ retval = -EAGAIN;
+ goto out;
+ }
+ if (!ignore_reset && mrioc->reset_in_progress) {
+ ioc_err(mrioc, "AdminReqQ submit reset in progress\n");
+ retval = -EAGAIN;
+ goto out;
+ }
+ areq_entry = (u8 *)mrioc->admin_req_base +
+ (areq_pi * MPI3MR_ADMIN_REQ_FRAME_SZ);
+ memset(areq_entry, 0, MPI3MR_ADMIN_REQ_FRAME_SZ);
+ memcpy(areq_entry, (u8 *)admin_req, admin_req_sz);
+
+ if (++areq_pi == max_entries)
+ areq_pi = 0;
+ mrioc->admin_req_pi = areq_pi;
+
+ writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi);
+
+out:
+ spin_unlock_irqrestore(&mrioc->admin_req_lock, flags);
+
+ return retval;
+}
+
+/**
+ * mpi3mr_setup_admin_qpair - Setup admin queue pair
+ * @mrioc: Adapter instance reference
+ *
+ * Allocate memory for admin queue pair if required and register
+ * the admin queue with the controller.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc)
+{
+ int retval = 0;
+ u32 num_admin_entries = 0;
+
+ mrioc->admin_req_q_sz = MPI3MR_ADMIN_REQ_Q_SIZE;
+ mrioc->num_admin_req = mrioc->admin_req_q_sz /
+ MPI3MR_ADMIN_REQ_FRAME_SZ;
+ mrioc->admin_req_ci = mrioc->admin_req_pi = 0;
+ mrioc->admin_req_base = NULL;
+
+ mrioc->admin_reply_q_sz = MPI3MR_ADMIN_REPLY_Q_SIZE;
+ mrioc->num_admin_replies = mrioc->admin_reply_q_sz /
+ MPI3MR_ADMIN_REPLY_FRAME_SZ;
+ mrioc->admin_reply_ci = 0;
+ mrioc->admin_reply_ephase = 1;
+ mrioc->admin_reply_base = NULL;
+
+ if (!mrioc->admin_req_base) {
+ mrioc->admin_req_base = dma_alloc_coherent(&mrioc->pdev->dev,
+ mrioc->admin_req_q_sz, &mrioc->admin_req_dma, GFP_KERNEL);
+
+ if (!mrioc->admin_req_base) {
+ retval = -1;
+ goto out_failed;
+ }
+
+ mrioc->admin_reply_base = dma_alloc_coherent(&mrioc->pdev->dev,
+ mrioc->admin_reply_q_sz, &mrioc->admin_reply_dma,
+ GFP_KERNEL);
+
+ if (!mrioc->admin_reply_base) {
+ retval = -1;
+ goto out_failed;
+ }
+ }
+
+ num_admin_entries = (mrioc->num_admin_replies << 16) |
+ (mrioc->num_admin_req);
+ writel(num_admin_entries, &mrioc->sysif_regs->admin_queue_num_entries);
+ mpi3mr_writeq(mrioc->admin_req_dma,
+ &mrioc->sysif_regs->admin_request_queue_address);
+ mpi3mr_writeq(mrioc->admin_reply_dma,
+ &mrioc->sysif_regs->admin_reply_queue_address);
+ writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi);
+ writel(mrioc->admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci);
+ return retval;
+
+out_failed:
+
+ if (mrioc->admin_reply_base) {
+ dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_reply_q_sz,
+ mrioc->admin_reply_base, mrioc->admin_reply_dma);
+ mrioc->admin_reply_base = NULL;
+ }
+ if (mrioc->admin_req_base) {
+ dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_req_q_sz,
+ mrioc->admin_req_base, mrioc->admin_req_dma);
+ mrioc->admin_req_base = NULL;
+ }
+ return retval;
+}
+
+/**
+ * mpi3mr_issue_iocfacts - Send IOC Facts
+ * @mrioc: Adapter instance reference
+ * @facts_data: Cached IOC facts data
+ *
+ * Issue IOC Facts MPI request through admin queue and wait for
+ * the completion of it or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_issue_iocfacts(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_ioc_facts_data *facts_data)
+{
+ struct _mpi3_ioc_facts_request iocfacts_req;
+ void *data = NULL;
+ dma_addr_t data_dma;
+ u32 data_len = sizeof(*facts_data);
+ int retval = 0;
+ u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST;
+
+ data = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma,
+ GFP_KERNEL);
+
+ if (!data) {
+ retval = -1;
+ goto out;
+ }
+
+ memset(&iocfacts_req, 0, sizeof(iocfacts_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "Issue IOCFacts: Init command is in use\n");
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ iocfacts_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ iocfacts_req.function = MPI3_FUNCTION_IOC_FACTS;
+
+ mpi3mr_add_sg_single(&iocfacts_req.sgl, sgl_flags, data_len,
+ data_dma);
+
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &iocfacts_req,
+ sizeof(iocfacts_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "Issue IOCFacts: Admin Post failed\n");
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "Issue IOCFacts: command timed out\n");
+ mpi3mr_set_diagsave(mrioc);
+ mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+ MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT);
+ mrioc->unrecoverable = 1;
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "Issue IOCFacts: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+ memcpy(facts_data, (u8 *)data, data_len);
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+
+out:
+ if (data)
+ dma_free_coherent(&mrioc->pdev->dev, data_len, data, data_dma);
+
+ return retval;
+}
+
+/**
+ * mpi3mr_check_reset_dma_mask - Process IOC facts data
+ * @mrioc: Adapter instance reference
+ *
+ * Check whether the new DMA mask requested through IOCFacts by
+ * firmware needs to be set, if so set it .
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static inline int mpi3mr_check_reset_dma_mask(struct mpi3mr_ioc *mrioc)
+{
+ struct pci_dev *pdev = mrioc->pdev;
+ int r;
+ u64 facts_dma_mask = DMA_BIT_MASK(mrioc->facts.dma_mask);
+
+ if (!mrioc->facts.dma_mask || (mrioc->dma_mask <= facts_dma_mask))
+ return 0;
+
+ ioc_info(mrioc, "Changing DMA mask from 0x%016llx to 0x%016llx\n",
+ mrioc->dma_mask, facts_dma_mask);
+
+ r = dma_set_mask_and_coherent(&pdev->dev, facts_dma_mask);
+ if (r) {
+ ioc_err(mrioc, "Setting DMA mask to 0x%016llx failed: %d\n",
+ facts_dma_mask, r);
+ return r;
+ }
+ mrioc->dma_mask = facts_dma_mask;
+ return r;
+}
+
+/**
+ * mpi3mr_process_factsdata - Process IOC facts data
+ * @mrioc: Adapter instance reference
+ * @facts_data: Cached IOC facts data
+ *
+ * Convert IOC facts data into cpu endianness and cache it in
+ * the driver .
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_ioc_facts_data *facts_data)
+{
+ u32 ioc_config, req_sz, facts_flags;
+
+ if ((le16_to_cpu(facts_data->ioc_facts_data_length)) !=
+ (sizeof(*facts_data) / 4)) {
+ ioc_warn(mrioc,
+ "IOCFactsdata length mismatch driver_sz(%zu) firmware_sz(%d)\n",
+ sizeof(*facts_data),
+ le16_to_cpu(facts_data->ioc_facts_data_length) * 4);
+ }
+
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ req_sz = 1 << ((ioc_config & MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ) >>
+ MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT);
+ if (le16_to_cpu(facts_data->ioc_request_frame_size) != (req_sz / 4)) {
+ ioc_err(mrioc,
+ "IOCFacts data reqFrameSize mismatch hw_size(%d) firmware_sz(%d)\n",
+ req_sz / 4, le16_to_cpu(facts_data->ioc_request_frame_size));
+ }
+
+ memset(&mrioc->facts, 0, sizeof(mrioc->facts));
+
+ facts_flags = le32_to_cpu(facts_data->flags);
+ mrioc->facts.op_req_sz = req_sz;
+ mrioc->op_reply_desc_sz = 1 << ((ioc_config &
+ MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ) >>
+ MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT);
+
+ mrioc->facts.ioc_num = facts_data->ioc_number;
+ mrioc->facts.who_init = facts_data->who_init;
+ mrioc->facts.max_msix_vectors = le16_to_cpu(facts_data->max_msix_vectors);
+ mrioc->facts.personality = (facts_flags &
+ MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK);
+ mrioc->facts.dma_mask = (facts_flags &
+ MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK) >>
+ MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT;
+ mrioc->facts.protocol_flags = facts_data->protocol_flags;
+ mrioc->facts.mpi_version = le32_to_cpu(facts_data->mpi_version.word);
+ mrioc->facts.max_reqs = le16_to_cpu(facts_data->max_outstanding_request);
+ mrioc->facts.product_id = le16_to_cpu(facts_data->product_id);
+ mrioc->facts.reply_sz = le16_to_cpu(facts_data->reply_frame_size) * 4;
+ mrioc->facts.exceptions = le16_to_cpu(facts_data->ioc_exceptions);
+ mrioc->facts.max_perids = le16_to_cpu(facts_data->max_persistent_id);
+ mrioc->facts.max_pds = le16_to_cpu(facts_data->max_pds);
+ mrioc->facts.max_vds = le16_to_cpu(facts_data->max_vds);
+ mrioc->facts.max_hpds = le16_to_cpu(facts_data->max_host_pds);
+ mrioc->facts.max_advhpds = le16_to_cpu(facts_data->max_advanced_host_pds);
+ mrioc->facts.max_raidpds = le16_to_cpu(facts_data->max_raid_pds);
+ mrioc->facts.max_nvme = le16_to_cpu(facts_data->max_nvme);
+ mrioc->facts.max_pcie_switches =
+ le16_to_cpu(facts_data->max_pc_ie_switches);
+ mrioc->facts.max_sasexpanders =
+ le16_to_cpu(facts_data->max_sas_expanders);
+ mrioc->facts.max_sasinitiators =
+ le16_to_cpu(facts_data->max_sas_initiators);
+ mrioc->facts.max_enclosures = le16_to_cpu(facts_data->max_enclosures);
+ mrioc->facts.min_devhandle = le16_to_cpu(facts_data->min_dev_handle);
+ mrioc->facts.max_devhandle = le16_to_cpu(facts_data->max_dev_handle);
+ mrioc->facts.max_op_req_q =
+ le16_to_cpu(facts_data->max_operational_request_queues);
+ mrioc->facts.max_op_reply_q =
+ le16_to_cpu(facts_data->max_operational_reply_queues);
+ mrioc->facts.ioc_capabilities =
+ le32_to_cpu(facts_data->ioc_capabilities);
+ mrioc->facts.fw_ver.build_num =
+ le16_to_cpu(facts_data->fw_version.build_num);
+ mrioc->facts.fw_ver.cust_id =
+ le16_to_cpu(facts_data->fw_version.customer_id);
+ mrioc->facts.fw_ver.ph_minor = facts_data->fw_version.phase_minor;
+ mrioc->facts.fw_ver.ph_major = facts_data->fw_version.phase_major;
+ mrioc->facts.fw_ver.gen_minor = facts_data->fw_version.gen_minor;
+ mrioc->facts.fw_ver.gen_major = facts_data->fw_version.gen_major;
+ mrioc->msix_count = min_t(int, mrioc->msix_count,
+ mrioc->facts.max_msix_vectors);
+ mrioc->facts.sge_mod_mask = facts_data->sge_modifier_mask;
+ mrioc->facts.sge_mod_value = facts_data->sge_modifier_value;
+ mrioc->facts.sge_mod_shift = facts_data->sge_modifier_shift;
+ mrioc->facts.shutdown_timeout =
+ le16_to_cpu(facts_data->shutdown_timeout);
+
+ ioc_info(mrioc, "ioc_num(%d), maxopQ(%d), maxopRepQ(%d), maxdh(%d),",
+ mrioc->facts.ioc_num, mrioc->facts.max_op_req_q,
+ mrioc->facts.max_op_reply_q, mrioc->facts.max_devhandle);
+ ioc_info(mrioc,
+ "maxreqs(%d), mindh(%d) maxPDs(%d) maxvectors(%d) maxperids(%d)\n",
+ mrioc->facts.max_reqs, mrioc->facts.min_devhandle,
+ mrioc->facts.max_pds, mrioc->facts.max_msix_vectors,
+ mrioc->facts.max_perids);
+ ioc_info(mrioc, "SGEModMask 0x%x SGEModVal 0x%x SGEModShift 0x%x ",
+ mrioc->facts.sge_mod_mask, mrioc->facts.sge_mod_value,
+ mrioc->facts.sge_mod_shift);
+ ioc_info(mrioc, "DMA mask %d InitialPE status 0x%x\n",
+ mrioc->facts.dma_mask, (facts_flags &
+ MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK));
+
+ mrioc->max_host_ios = mrioc->facts.max_reqs - MPI3MR_INTERNAL_CMDS_RESVD;
+
+ if (reset_devices)
+ mrioc->max_host_ios = min_t(int, mrioc->max_host_ios,
+ MPI3MR_HOST_IOS_KDUMP);
+}
+
+/**
+ * mpi3mr_alloc_reply_sense_bufs - Send IOC Init
+ * @mrioc: Adapter instance reference
+ *
+ * Allocate and initialize the reply free buffers, sense
+ * buffers, reply free queue and sense buffer queue.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc)
+{
+ int retval = 0;
+ u32 sz, i;
+ dma_addr_t phy_addr;
+
+ if (mrioc->init_cmds.reply)
+ goto post_reply_sbuf;
+
+ mrioc->init_cmds.reply = kzalloc(mrioc->facts.reply_sz, GFP_KERNEL);
+ if (!mrioc->init_cmds.reply)
+ goto out_failed;
+
+ mrioc->num_reply_bufs = mrioc->facts.max_reqs + MPI3MR_NUM_EVT_REPLIES;
+ mrioc->reply_free_qsz = mrioc->num_reply_bufs + 1;
+ mrioc->num_sense_bufs = mrioc->facts.max_reqs / MPI3MR_SENSEBUF_FACTOR;
+ mrioc->sense_buf_q_sz = mrioc->num_sense_bufs + 1;
+
+ /* reply buffer pool, 16 byte align */
+ sz = mrioc->num_reply_bufs * mrioc->facts.reply_sz;
+ mrioc->reply_buf_pool = dma_pool_create("reply_buf pool",
+ &mrioc->pdev->dev, sz, 16, 0);
+ if (!mrioc->reply_buf_pool) {
+ ioc_err(mrioc, "reply buf pool: dma_pool_create failed\n");
+ goto out_failed;
+ }
+
+ mrioc->reply_buf = dma_pool_zalloc(mrioc->reply_buf_pool, GFP_KERNEL,
+ &mrioc->reply_buf_dma);
+ if (!mrioc->reply_buf)
+ goto out_failed;
+
+ mrioc->reply_buf_dma_max_address = mrioc->reply_buf_dma + sz;
+
+ /* reply free queue, 8 byte align */
+ sz = mrioc->reply_free_qsz * 8;
+ mrioc->reply_free_q_pool = dma_pool_create("reply_free_q pool",
+ &mrioc->pdev->dev, sz, 8, 0);
+ if (!mrioc->reply_free_q_pool) {
+ ioc_err(mrioc, "reply_free_q pool: dma_pool_create failed\n");
+ goto out_failed;
+ }
+ mrioc->reply_free_q = dma_pool_zalloc(mrioc->reply_free_q_pool,
+ GFP_KERNEL, &mrioc->reply_free_q_dma);
+ if (!mrioc->reply_free_q)
+ goto out_failed;
+
+ /* sense buffer pool, 4 byte align */
+ sz = mrioc->num_sense_bufs * MPI3MR_SENSEBUF_SZ;
+ mrioc->sense_buf_pool = dma_pool_create("sense_buf pool",
+ &mrioc->pdev->dev, sz, 4, 0);
+ if (!mrioc->sense_buf_pool) {
+ ioc_err(mrioc, "sense_buf pool: dma_pool_create failed\n");
+ goto out_failed;
+ }
+ mrioc->sense_buf = dma_pool_zalloc(mrioc->sense_buf_pool, GFP_KERNEL,
+ &mrioc->sense_buf_dma);
+ if (!mrioc->sense_buf)
+ goto out_failed;
+
+ /* sense buffer queue, 8 byte align */
+ sz = mrioc->sense_buf_q_sz * 8;
+ mrioc->sense_buf_q_pool = dma_pool_create("sense_buf_q pool",
+ &mrioc->pdev->dev, sz, 8, 0);
+ if (!mrioc->sense_buf_q_pool) {
+ ioc_err(mrioc, "sense_buf_q pool: dma_pool_create failed\n");
+ goto out_failed;
+ }
+ mrioc->sense_buf_q = dma_pool_zalloc(mrioc->sense_buf_q_pool,
+ GFP_KERNEL, &mrioc->sense_buf_q_dma);
+ if (!mrioc->sense_buf_q)
+ goto out_failed;
+
+post_reply_sbuf:
+ sz = mrioc->num_reply_bufs * mrioc->facts.reply_sz;
+ ioc_info(mrioc,
+ "reply buf pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), reply_dma(0x%llx)\n",
+ mrioc->reply_buf, mrioc->num_reply_bufs, mrioc->facts.reply_sz,
+ (sz / 1024), (unsigned long long)mrioc->reply_buf_dma);
+ sz = mrioc->reply_free_qsz * 8;
+ ioc_info(mrioc,
+ "reply_free_q pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), reply_dma(0x%llx)\n",
+ mrioc->reply_free_q, mrioc->reply_free_qsz, 8, (sz / 1024),
+ (unsigned long long)mrioc->reply_free_q_dma);
+ sz = mrioc->num_sense_bufs * MPI3MR_SENSEBUF_SZ;
+ ioc_info(mrioc,
+ "sense_buf pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), sense_dma(0x%llx)\n",
+ mrioc->sense_buf, mrioc->num_sense_bufs, MPI3MR_SENSEBUF_SZ,
+ (sz / 1024), (unsigned long long)mrioc->sense_buf_dma);
+ sz = mrioc->sense_buf_q_sz * 8;
+ ioc_info(mrioc,
+ "sense_buf_q pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), sense_dma(0x%llx)\n",
+ mrioc->sense_buf_q, mrioc->sense_buf_q_sz, 8, (sz / 1024),
+ (unsigned long long)mrioc->sense_buf_q_dma);
+
+ /* initialize Reply buffer Queue */
+ for (i = 0, phy_addr = mrioc->reply_buf_dma;
+ i < mrioc->num_reply_bufs; i++, phy_addr += mrioc->facts.reply_sz)
+ mrioc->reply_free_q[i] = cpu_to_le64(phy_addr);
+ mrioc->reply_free_q[i] = cpu_to_le64(0);
+
+ /* initialize Sense Buffer Queue */
+ for (i = 0, phy_addr = mrioc->sense_buf_dma;
+ i < mrioc->num_sense_bufs; i++, phy_addr += MPI3MR_SENSEBUF_SZ)
+ mrioc->sense_buf_q[i] = cpu_to_le64(phy_addr);
+ mrioc->sense_buf_q[i] = cpu_to_le64(0);
+ return retval;
+
+out_failed:
+ retval = -1;
+ return retval;
+}
+
+/**
+ * mpi3mr_issue_iocinit - Send IOC Init
+ * @mrioc: Adapter instance reference
+ *
+ * Issue IOC Init MPI request through admin queue and wait for
+ * the completion of it or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc)
+{
+ struct _mpi3_ioc_init_request iocinit_req;
+ struct _mpi3_driver_info_layout *drv_info;
+ dma_addr_t data_dma;
+ u32 data_len = sizeof(*drv_info);
+ int retval = 0;
+ ktime_t current_time;
+
+ drv_info = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma,
+ GFP_KERNEL);
+ if (!drv_info) {
+ retval = -1;
+ goto out;
+ }
+ drv_info->information_length = cpu_to_le32(data_len);
+ strncpy(drv_info->driver_signature, "Broadcom", sizeof(drv_info->driver_signature));
+ strncpy(drv_info->os_name, utsname()->sysname, sizeof(drv_info->os_name));
+ drv_info->os_name[sizeof(drv_info->os_name) - 1] = 0;
+ strncpy(drv_info->os_version, utsname()->release, sizeof(drv_info->os_version));
+ drv_info->os_version[sizeof(drv_info->os_version) - 1] = 0;
+ strncpy(drv_info->driver_name, MPI3MR_DRIVER_NAME, sizeof(drv_info->driver_name));
+ strncpy(drv_info->driver_version, MPI3MR_DRIVER_VERSION, sizeof(drv_info->driver_version));
+ strncpy(drv_info->driver_release_date, MPI3MR_DRIVER_RELDATE, sizeof(drv_info->driver_release_date));
+ drv_info->driver_capabilities = 0;
+ memcpy((u8 *)&mrioc->driver_info, (u8 *)drv_info,
+ sizeof(mrioc->driver_info));
+
+ memset(&iocinit_req, 0, sizeof(iocinit_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "Issue IOCInit: Init command is in use\n");
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ iocinit_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ iocinit_req.function = MPI3_FUNCTION_IOC_INIT;
+ iocinit_req.mpi_version.mpi3_version.dev = MPI3_VERSION_DEV;
+ iocinit_req.mpi_version.mpi3_version.unit = MPI3_VERSION_UNIT;
+ iocinit_req.mpi_version.mpi3_version.major = MPI3_VERSION_MAJOR;
+ iocinit_req.mpi_version.mpi3_version.minor = MPI3_VERSION_MINOR;
+ iocinit_req.who_init = MPI3_WHOINIT_HOST_DRIVER;
+ iocinit_req.reply_free_queue_depth = cpu_to_le16(mrioc->reply_free_qsz);
+ iocinit_req.reply_free_queue_address =
+ cpu_to_le64(mrioc->reply_free_q_dma);
+ iocinit_req.sense_buffer_length = cpu_to_le16(MPI3MR_SENSEBUF_SZ);
+ iocinit_req.sense_buffer_free_queue_depth =
+ cpu_to_le16(mrioc->sense_buf_q_sz);
+ iocinit_req.sense_buffer_free_queue_address =
+ cpu_to_le64(mrioc->sense_buf_q_dma);
+ iocinit_req.driver_information_address = cpu_to_le64(data_dma);
+
+ current_time = ktime_get_real();
+ iocinit_req.time_stamp = cpu_to_le64(ktime_to_ms(current_time));
+
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &iocinit_req,
+ sizeof(iocinit_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "Issue IOCInit: Admin Post failed\n");
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ mpi3mr_set_diagsave(mrioc);
+ mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+ MPI3MR_RESET_FROM_IOCINIT_TIMEOUT);
+ mrioc->unrecoverable = 1;
+ ioc_err(mrioc, "Issue IOCInit: command timed out\n");
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "Issue IOCInit: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+
+out:
+ if (drv_info)
+ dma_free_coherent(&mrioc->pdev->dev, data_len, drv_info,
+ data_dma);
+
+ return retval;
+}
+
+/**
+ * mpi3mr_alloc_chain_bufs - Allocate chain buffers
+ * @mrioc: Adapter instance reference
+ *
+ * Allocate chain buffers and set a bitmap to indicate free
+ * chain buffers. Chain buffers are used to pass the SGE
+ * information along with MPI3 SCSI IO requests for host I/O.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+static int mpi3mr_alloc_chain_bufs(struct mpi3mr_ioc *mrioc)
+{
+ int retval = 0;
+ u32 sz, i;
+ u16 num_chains;
+
+ num_chains = mrioc->max_host_ios / MPI3MR_CHAINBUF_FACTOR;
+
+ mrioc->chain_buf_count = num_chains;
+ sz = sizeof(struct chain_element) * num_chains;
+ mrioc->chain_sgl_list = kzalloc(sz, GFP_KERNEL);
+ if (!mrioc->chain_sgl_list)
+ goto out_failed;
+
+ sz = MPI3MR_PAGE_SIZE_4K;
+ mrioc->chain_buf_pool = dma_pool_create("chain_buf pool",
+ &mrioc->pdev->dev, sz, 16, 0);
+ if (!mrioc->chain_buf_pool) {
+ ioc_err(mrioc, "chain buf pool: dma_pool_create failed\n");
+ goto out_failed;
+ }
+
+ for (i = 0; i < num_chains; i++) {
+ mrioc->chain_sgl_list[i].addr =
+ dma_pool_zalloc(mrioc->chain_buf_pool, GFP_KERNEL,
+ &mrioc->chain_sgl_list[i].dma_addr);
+
+ if (!mrioc->chain_sgl_list[i].addr)
+ goto out_failed;
+ }
+ mrioc->chain_bitmap_sz = num_chains / 8;
+ if (num_chains % 8)
+ mrioc->chain_bitmap_sz++;
+ mrioc->chain_bitmap = kzalloc(mrioc->chain_bitmap_sz, GFP_KERNEL);
+ if (!mrioc->chain_bitmap)
+ goto out_failed;
+ return retval;
+out_failed:
+ retval = -1;
+ return retval;
+}
+
+/**
+ * mpi3mr_cleanup_resources - Free PCI resources
+ * @mrioc: Adapter instance reference
+ *
+ * Unmap PCI device memory and disable PCI device.
+ *
+ * Return: 0 on success and non-zero on failure.
+ */
+void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc)
+{
+ struct pci_dev *pdev = mrioc->pdev;
+
+ mpi3mr_cleanup_isr(mrioc);
+
+ if (mrioc->sysif_regs) {
+ iounmap((void __iomem *)mrioc->sysif_regs);
+ mrioc->sysif_regs = NULL;
+ }
+
+ if (pci_is_enabled(pdev)) {
+ if (mrioc->bars)
+ pci_release_selected_regions(pdev, mrioc->bars);
+ pci_disable_device(pdev);
+ }
+}
+
+/**
+ * mpi3mr_setup_resources - Enable PCI resources
+ * @mrioc: Adapter instance reference
+ *
+ * Enable PCI device memory, MSI-x registers and set DMA mask.
+ *
+ * Return: 0 on success and non-zero on failure.
+ */
+int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc)
+{
+ struct pci_dev *pdev = mrioc->pdev;
+ u32 memap_sz = 0;
+ int i, retval = 0, capb = 0;
+ u16 message_control;
+ u64 dma_mask = mrioc->dma_mask ? mrioc->dma_mask :
+ (((dma_get_required_mask(&pdev->dev) > DMA_BIT_MASK(32)) &&
+ (sizeof(dma_addr_t) > 4)) ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32));
+
+ if (pci_enable_device_mem(pdev)) {
+ ioc_err(mrioc, "pci_enable_device_mem: failed\n");
+ retval = -ENODEV;
+ goto out_failed;
+ }
+
+ capb = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+ if (!capb) {
+ ioc_err(mrioc, "Unable to find MSI-X Capabilities\n");
+ retval = -ENODEV;
+ goto out_failed;
+ }
+ mrioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+
+ if (pci_request_selected_regions(pdev, mrioc->bars,
+ mrioc->driver_name)) {
+ ioc_err(mrioc, "pci_request_selected_regions: failed\n");
+ retval = -ENODEV;
+ goto out_failed;
+ }
+
+ for (i = 0; (i < DEVICE_COUNT_RESOURCE); i++) {
+ if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
+ mrioc->sysif_regs_phys = pci_resource_start(pdev, i);
+ memap_sz = pci_resource_len(pdev, i);
+ mrioc->sysif_regs =
+ ioremap(mrioc->sysif_regs_phys, memap_sz);
+ break;
+ }
+ }
+
+ pci_set_master(pdev);
+
+ retval = dma_set_mask_and_coherent(&pdev->dev, dma_mask);
+ if (retval) {
+ if (dma_mask != DMA_BIT_MASK(32)) {
+ ioc_warn(mrioc, "Setting 64 bit DMA mask failed\n");
+ dma_mask = DMA_BIT_MASK(32);
+ retval = dma_set_mask_and_coherent(&pdev->dev,
+ dma_mask);
+ }
+ if (retval) {
+ mrioc->dma_mask = 0;
+ ioc_err(mrioc, "Setting 32 bit DMA mask also failed\n");
+ goto out_failed;
+ }
+ }
+ mrioc->dma_mask = dma_mask;
+
+ if (!mrioc->sysif_regs) {
+ ioc_err(mrioc,
+ "Unable to map adapter memory or resource not found\n");
+ retval = -EINVAL;
+ goto out_failed;
+ }
+
+ pci_read_config_word(pdev, capb + 2, &message_control);
+ mrioc->msix_count = (message_control & 0x3FF) + 1;
+
+ pci_save_state(pdev);
+
+ pci_set_drvdata(pdev, mrioc->shost);
+
+ mpi3mr_ioc_disable_intr(mrioc);
+
+ ioc_info(mrioc, "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
+ (unsigned long long)mrioc->sysif_regs_phys,
+ mrioc->sysif_regs, memap_sz);
+ ioc_info(mrioc, "Number of MSI-X vectors found in capabilities: (%d)\n",
+ mrioc->msix_count);
+ return retval;
+
+out_failed:
+ mpi3mr_cleanup_resources(mrioc);
+ return retval;
+}
+
+/**
+ * mpi3mr_init_ioc - Initialize the controller
+ * @mrioc: Adapter instance reference
+ *
+ * This the controller initialization routine, executed either
+ * after soft reset or from pci probe callback.
+ * Setup the required resources, memory map the controller
+ * registers, create admin and operational reply queue pairs,
+ * allocate required memory for reply pool, sense buffer pool,
+ * issue IOC init request to the firmware, unmask the events and
+ * issue port enable to discover SAS/SATA/NVMe devies and RAID
+ * volumes.
+ *
+ * Return: 0 on success and non-zero on failure.
+ */
+int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
+{
+ int retval = 0;
+ enum mpi3mr_iocstate ioc_state;
+ u64 base_info;
+ u32 timeout;
+ u32 ioc_status, ioc_config;
+ struct _mpi3_ioc_facts_data facts_data;
+
+ mrioc->change_count = 0;
+ mrioc->cpu_count = num_online_cpus();
+ retval = mpi3mr_setup_resources(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to setup resources:error %d\n",
+ retval);
+ goto out_nocleanup;
+ }
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+
+ ioc_info(mrioc, "SOD status %x configuration %x\n",
+ ioc_status, ioc_config);
+
+ base_info = lo_hi_readq(&mrioc->sysif_regs->ioc_information);
+ ioc_info(mrioc, "SOD base_info %llx\n", base_info);
+
+ /*The timeout value is in 2sec unit, changing it to seconds*/
+ mrioc->ready_timeout =
+ ((base_info & MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK) >>
+ MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT) * 2;
+
+ ioc_info(mrioc, "IOC ready timeout %d\n", mrioc->ready_timeout);
+
+ ioc_state = mpi3mr_get_iocstate(mrioc);
+ ioc_info(mrioc, "IOC in %s state during detection\n",
+ mpi3mr_iocstate_name(ioc_state));
+
+ if (ioc_state == MRIOC_STATE_BECOMING_READY ||
+ ioc_state == MRIOC_STATE_RESET_REQUESTED) {
+ timeout = mrioc->ready_timeout * 10;
+ do {
+ msleep(100);
+ } while (--timeout);
+
+ ioc_state = mpi3mr_get_iocstate(mrioc);
+ ioc_info(mrioc,
+ "IOC in %s state after waiting for reset time\n",
+ mpi3mr_iocstate_name(ioc_state));
+ }
+
+ if (ioc_state == MRIOC_STATE_READY) {
+ retval = mpi3mr_issue_and_process_mur(mrioc,
+ MPI3MR_RESET_FROM_BRINGUP);
+ if (retval) {
+ ioc_err(mrioc, "Failed to MU reset IOC error %d\n",
+ retval);
+ }
+ ioc_state = mpi3mr_get_iocstate(mrioc);
+ }
+ if (ioc_state != MRIOC_STATE_RESET) {
+ mpi3mr_print_fault_info(mrioc);
+ retval = mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET,
+ MPI3MR_RESET_FROM_BRINGUP);
+ if (retval) {
+ ioc_err(mrioc,
+ "%s :Failed to soft reset IOC error %d\n",
+ __func__, retval);
+ goto out_failed;
+ }
+ }
+ ioc_state = mpi3mr_get_iocstate(mrioc);
+ if (ioc_state != MRIOC_STATE_RESET) {
+ ioc_err(mrioc, "Cannot bring IOC to reset state\n");
+ goto out_failed;
+ }
+
+ retval = mpi3mr_setup_admin_qpair(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to setup admin Qs: error %d\n",
+ retval);
+ goto out_failed;
+ }
+
+ retval = mpi3mr_bring_ioc_ready(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to bring ioc ready: error %d\n",
+ retval);
+ goto out_failed;
+ }
+
+ retval = mpi3mr_setup_isr(mrioc, 1);
+ if (retval) {
+ ioc_err(mrioc, "Failed to setup ISR error %d\n",
+ retval);
+ goto out_failed;
+ }
+
+ retval = mpi3mr_issue_iocfacts(mrioc, &facts_data);
+ if (retval) {
+ ioc_err(mrioc, "Failed to Issue IOC Facts %d\n",
+ retval);
+ goto out_failed;
+ }
+
+ mpi3mr_process_factsdata(mrioc, &facts_data);
+ retval = mpi3mr_check_reset_dma_mask(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Resetting dma mask failed %d\n",
+ retval);
+ goto out_failed;
+ }
+
+ retval = mpi3mr_alloc_reply_sense_bufs(mrioc);
+ if (retval) {
+ ioc_err(mrioc,
+ "%s :Failed to allocated reply sense buffers %d\n",
+ __func__, retval);
+ goto out_failed;
+ }
+
+ retval = mpi3mr_alloc_chain_bufs(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to allocated chain buffers %d\n",
+ retval);
+ goto out_failed;
+ }
+
+ retval = mpi3mr_issue_iocinit(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to Issue IOC Init %d\n",
+ retval);
+ goto out_failed;
+ }
+ mrioc->reply_free_queue_host_index = mrioc->num_reply_bufs;
+ writel(mrioc->reply_free_queue_host_index,
+ &mrioc->sysif_regs->reply_free_host_index);
+
+ mrioc->sbq_host_index = mrioc->num_sense_bufs;
+ writel(mrioc->sbq_host_index,
+ &mrioc->sysif_regs->sense_buffer_free_host_index);
+
+ retval = mpi3mr_setup_isr(mrioc, 0);
+ if (retval) {
+ ioc_err(mrioc, "Failed to re-setup ISR, error %d\n",
+ retval);
+ goto out_failed;
+ }
+
+ return retval;
+
+out_failed:
+ mpi3mr_cleanup_ioc(mrioc);
+out_nocleanup:
+ return retval;
+}
+
+/**
+ * mpi3mr_free_mem - Free memory allocated for a controller
+ * @mrioc: Adapter instance reference
+ *
+ * Free all the memory allocated for a controller.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
+{
+ u16 i;
+ struct mpi3mr_intr_info *intr_info;
+
+ if (mrioc->sense_buf_pool) {
+ if (mrioc->sense_buf)
+ dma_pool_free(mrioc->sense_buf_pool, mrioc->sense_buf,
+ mrioc->sense_buf_dma);
+ dma_pool_destroy(mrioc->sense_buf_pool);
+ mrioc->sense_buf = NULL;
+ mrioc->sense_buf_pool = NULL;
+ }
+ if (mrioc->sense_buf_q_pool) {
+ if (mrioc->sense_buf_q)
+ dma_pool_free(mrioc->sense_buf_q_pool,
+ mrioc->sense_buf_q, mrioc->sense_buf_q_dma);
+ dma_pool_destroy(mrioc->sense_buf_q_pool);
+ mrioc->sense_buf_q = NULL;
+ mrioc->sense_buf_q_pool = NULL;
+ }
+
+ if (mrioc->reply_buf_pool) {
+ if (mrioc->reply_buf)
+ dma_pool_free(mrioc->reply_buf_pool, mrioc->reply_buf,
+ mrioc->reply_buf_dma);
+ dma_pool_destroy(mrioc->reply_buf_pool);
+ mrioc->reply_buf = NULL;
+ mrioc->reply_buf_pool = NULL;
+ }
+ if (mrioc->reply_free_q_pool) {
+ if (mrioc->reply_free_q)
+ dma_pool_free(mrioc->reply_free_q_pool,
+ mrioc->reply_free_q, mrioc->reply_free_q_dma);
+ dma_pool_destroy(mrioc->reply_free_q_pool);
+ mrioc->reply_free_q = NULL;
+ mrioc->reply_free_q_pool = NULL;
+ }
+
+ for (i = 0; i < mrioc->intr_info_count; i++) {
+ intr_info = mrioc->intr_info + i;
+ if (intr_info)
+ intr_info->op_reply_q = NULL;
+ }
+
+ kfree(mrioc->req_qinfo);
+ mrioc->req_qinfo = NULL;
+ mrioc->num_op_req_q = 0;
+
+ kfree(mrioc->op_reply_qinfo);
+ mrioc->op_reply_qinfo = NULL;
+ mrioc->num_op_reply_q = 0;
+
+ kfree(mrioc->init_cmds.reply);
+ mrioc->init_cmds.reply = NULL;
+
+ kfree(mrioc->chain_bitmap);
+ mrioc->chain_bitmap = NULL;
+
+ if (mrioc->chain_buf_pool) {
+ for (i = 0; i < mrioc->chain_buf_count; i++) {
+ if (mrioc->chain_sgl_list[i].addr) {
+ dma_pool_free(mrioc->chain_buf_pool,
+ mrioc->chain_sgl_list[i].addr,
+ mrioc->chain_sgl_list[i].dma_addr);
+ mrioc->chain_sgl_list[i].addr = NULL;
+ }
+ }
+ dma_pool_destroy(mrioc->chain_buf_pool);
+ mrioc->chain_buf_pool = NULL;
+ }
+
+ kfree(mrioc->chain_sgl_list);
+ mrioc->chain_sgl_list = NULL;
+
+ if (mrioc->admin_reply_base) {
+ dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_reply_q_sz,
+ mrioc->admin_reply_base, mrioc->admin_reply_dma);
+ mrioc->admin_reply_base = NULL;
+ }
+ if (mrioc->admin_req_base) {
+ dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_req_q_sz,
+ mrioc->admin_req_base, mrioc->admin_req_dma);
+ mrioc->admin_req_base = NULL;
+ }
+}
+
+/**
+ * mpi3mr_issue_ioc_shutdown - shutdown controller
+ * @mrioc: Adapter instance reference
+ *
+ * Send shutodwn notification to the controller and wait for the
+ * shutdown_timeout for it to be completed.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc)
+{
+ u32 ioc_config, ioc_status;
+ u8 retval = 1;
+ u32 timeout = MPI3MR_DEFAULT_SHUTDOWN_TIME * 10;
+
+ ioc_info(mrioc, "Issuing shutdown Notification\n");
+ if (mrioc->unrecoverable) {
+ ioc_warn(mrioc,
+ "IOC is unrecoverable shutdown is not issued\n");
+ return;
+ }
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK)
+ == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS) {
+ ioc_info(mrioc, "shutdown already in progress\n");
+ return;
+ }
+
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ ioc_config |= MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL;
+ ioc_config |= MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN;
+
+ writel(ioc_config, &mrioc->sysif_regs->ioc_configuration);
+
+ if (mrioc->facts.shutdown_timeout)
+ timeout = mrioc->facts.shutdown_timeout * 10;
+
+ do {
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK)
+ == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE) {
+ retval = 0;
+ break;
+ }
+ msleep(100);
+ } while (--timeout);
+
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+
+ if (retval) {
+ if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK)
+ == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS)
+ ioc_warn(mrioc,
+ "shutdown still in progress after timeout\n");
+ }
+
+ ioc_info(mrioc,
+ "Base IOC Sts/Config after %s shutdown is (0x%x)/(0x%x)\n",
+ (!retval) ? "successful" : "failed", ioc_status,
+ ioc_config);
+}
+
+/**
+ * mpi3mr_cleanup_ioc - Cleanup controller
+ * @mrioc: Adapter instance reference
+ *
+ * controller cleanup handler, Message unit reset or soft reset
+ * and shutdown notification is issued to the controller and the
+ * associated memory resources are freed.
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc)
+{
+ enum mpi3mr_iocstate ioc_state;
+
+ mpi3mr_ioc_disable_intr(mrioc);
+
+ ioc_state = mpi3mr_get_iocstate(mrioc);
+
+ if ((!mrioc->unrecoverable) && (!mrioc->reset_in_progress) &&
+ (ioc_state == MRIOC_STATE_READY)) {
+ if (mpi3mr_issue_and_process_mur(mrioc,
+ MPI3MR_RESET_FROM_CTLR_CLEANUP))
+ mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET,
+ MPI3MR_RESET_FROM_MUR_FAILURE);
+
+ mpi3mr_issue_ioc_shutdown(mrioc);
+ }
+
+ mpi3mr_free_mem(mrioc);
+ mpi3mr_cleanup_resources(mrioc);
+}
+
+/**
+ * mpi3mr_soft_reset_handler - Reset the controller
+ * @mrioc: Adapter instance reference
+ * @reset_reason: Reset reason code
+ * @snapdump: Flag to generate snapdump in firmware or not
+ *
+ * TBD
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
+ u32 reset_reason, u8 snapdump)
+{
+ return 0;
+}
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
new file mode 100644
index 000000000000..37517504bb33
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Broadcom MPI3 Storage Controllers
+ *
+ * Copyright (C) 2017-2021 Broadcom Inc.
+ * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com)
+ *
+ */
+
+#include "mpi3mr.h"
+
+/* global driver scop variables */
+LIST_HEAD(mrioc_list);
+DEFINE_SPINLOCK(mrioc_list_lock);
+static int mrioc_ids;
+static int warn_non_secure_ctlr;
+
+MODULE_AUTHOR(MPI3MR_DRIVER_AUTHOR);
+MODULE_DESCRIPTION(MPI3MR_DRIVER_DESC);
+MODULE_LICENSE(MPI3MR_DRIVER_LICENSE);
+MODULE_VERSION(MPI3MR_DRIVER_VERSION);
+
+/* Module parameters*/
+int logging_level;
+module_param(logging_level, int, 0);
+MODULE_PARM_DESC(logging_level,
+ " bits for enabling additional logging info (default=0)");
+
+/**
+ * mpi3mr_map_queues - Map queues callback handler
+ * @shost: SCSI host reference
+ *
+ * Call the blk_mq_pci_map_queues with from which operational
+ * queue the mapping has to be done
+ *
+ * Return: return of blk_mq_pci_map_queues
+ */
+static int mpi3mr_map_queues(struct Scsi_Host *shost)
+{
+ struct mpi3mr_ioc *mrioc = shost_priv(shost);
+
+ return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
+ mrioc->pdev, 0);
+}
+
+/**
+ * mpi3mr_slave_destroy - Slave destroy callback handler
+ * @sdev: SCSI device reference
+ *
+ * Cleanup and free per device(lun) private data.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_slave_destroy(struct scsi_device *sdev)
+{
+}
+
+/**
+ * mpi3mr_target_destroy - Target destroy callback handler
+ * @starget: SCSI target reference
+ *
+ * Cleanup and free per target private data.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_target_destroy(struct scsi_target *starget)
+{
+}
+
+/**
+ * mpi3mr_slave_configure - Slave configure callback handler
+ * @sdev: SCSI device reference
+ *
+ * Configure queue depth, max hardware sectors and virt boundary
+ * as required
+ *
+ * Return: 0 always.
+ */
+static int mpi3mr_slave_configure(struct scsi_device *sdev)
+{
+ int retval = 0;
+ return retval;
+}
+
+/**
+ * mpi3mr_slave_alloc -Slave alloc callback handler
+ * @sdev: SCSI device reference
+ *
+ * Allocate per device(lun) private data and initialize it.
+ *
+ * Return: 0 on success -ENOMEM on memory allocation failure.
+ */
+static int mpi3mr_slave_alloc(struct scsi_device *sdev)
+{
+ int retval = 0;
+ return retval;
+}
+
+/**
+ * mpi3mr_target_alloc - Target alloc callback handler
+ * @starget: SCSI target reference
+ *
+ * Allocate per target private data and initialize it.
+ *
+ * Return: 0 on success -ENOMEM on memory allocation failure.
+ */
+static int mpi3mr_target_alloc(struct scsi_target *starget)
+{
+ int retval = -ENODEV;
+ return retval;
+}
+
+/**
+ * mpi3mr_qcmd - I/O request despatcher
+ * @shost: SCSI Host reference
+ * @scmd: SCSI Command reference
+ *
+ * Issues the SCSI Command as an MPI3 request.
+ *
+ * Return: 0 on successful queueing of the request or if the
+ * request is completed with failure.
+ * SCSI_MLQUEUE_DEVICE_BUSY when the device is busy.
+ * SCSI_MLQUEUE_HOST_BUSY when the host queue is full.
+ */
+static int mpi3mr_qcmd(struct Scsi_Host *shost,
+ struct scsi_cmnd *scmd)
+{
+ int retval = 0;
+
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ return retval;
+}
+
+static struct scsi_host_template mpi3mr_driver_template = {
+ .module = THIS_MODULE,
+ .name = "MPI3 Storage Controller",
+ .proc_name = MPI3MR_DRIVER_NAME,
+ .queuecommand = mpi3mr_qcmd,
+ .target_alloc = mpi3mr_target_alloc,
+ .slave_alloc = mpi3mr_slave_alloc,
+ .slave_configure = mpi3mr_slave_configure,
+ .target_destroy = mpi3mr_target_destroy,
+ .slave_destroy = mpi3mr_slave_destroy,
+ .map_queues = mpi3mr_map_queues,
+ .no_write_same = 1,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = MPI3MR_SG_DEPTH,
+ /* max xfer supported is 1M (2K in 512 byte sized sectors)
+ */
+ .max_sectors = 2048,
+ .cmd_per_lun = MPI3MR_MAX_CMDS_LUN,
+ .track_queue_depth = 1,
+ .cmd_size = sizeof(struct scmd_priv),
+};
+
+/**
+ * mpi3mr_init_drv_cmd - Initialize internal command tracker
+ * @cmdptr: Internal command tracker
+ * @host_tag: Host tag used for the specific command
+ *
+ * Initialize the internal command tracker structure with
+ * specified host tag.
+ *
+ * Return: Nothing.
+ */
+static inline void mpi3mr_init_drv_cmd(struct mpi3mr_drv_cmd *cmdptr,
+ u16 host_tag)
+{
+ mutex_init(&cmdptr->mutex);
+ cmdptr->reply = NULL;
+ cmdptr->state = MPI3MR_CMD_NOTUSED;
+ cmdptr->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+ cmdptr->host_tag = host_tag;
+}
+
+/**
+ * mpi3mr_probe - PCI probe callback
+ * @pdev: PCI device instance
+ * @id: PCI device ID details
+ *
+ * controller initialization routine. Checks the security status
+ * of the controller and if it is invalid or tampered return the
+ * probe without initializing the controller. Otherwise,
+ * allocate per adapter instance through shost_priv and
+ * initialize controller specific data structures, initializae
+ * the controller hardware, add shost to the SCSI subsystem.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+
+static int
+mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct mpi3mr_ioc *mrioc = NULL;
+ struct Scsi_Host *shost = NULL;
+ int retval = 0;
+
+ shost = scsi_host_alloc(&mpi3mr_driver_template,
+ sizeof(struct mpi3mr_ioc));
+ if (!shost) {
+ retval = -ENODEV;
+ goto shost_failed;
+ }
+
+ mrioc = shost_priv(shost);
+ mrioc->id = mrioc_ids++;
+ sprintf(mrioc->driver_name, "%s", MPI3MR_DRIVER_NAME);
+ sprintf(mrioc->name, "%s%d", mrioc->driver_name, mrioc->id);
+ INIT_LIST_HEAD(&mrioc->list);
+ spin_lock(&mrioc_list_lock);
+ list_add_tail(&mrioc->list, &mrioc_list);
+ spin_unlock(&mrioc_list_lock);
+
+ spin_lock_init(&mrioc->admin_req_lock);
+ spin_lock_init(&mrioc->reply_free_queue_lock);
+ spin_lock_init(&mrioc->sbq_lock);
+
+ mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
+
+ mrioc->logging_level = logging_level;
+ mrioc->shost = shost;
+ mrioc->pdev = pdev;
+
+ /* init shost parameters */
+ shost->max_cmd_len = MPI3MR_MAX_CDB_LENGTH;
+ shost->max_lun = -1;
+ shost->unique_id = mrioc->id;
+
+ shost->max_channel = 1;
+ shost->max_id = 0xFFFFFFFF;
+
+ mrioc->is_driver_loading = 1;
+ if (mpi3mr_init_ioc(mrioc)) {
+ ioc_err(mrioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ retval = -ENODEV;
+ goto out_iocinit_failed;
+ }
+
+ shost->nr_hw_queues = mrioc->num_op_reply_q;
+ shost->can_queue = mrioc->max_host_ios;
+ shost->sg_tablesize = MPI3MR_SG_DEPTH;
+ shost->max_id = mrioc->facts.max_perids;
+
+ retval = scsi_add_host(shost, &pdev->dev);
+ if (retval) {
+ ioc_err(mrioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ goto addhost_failed;
+ }
+
+ scsi_scan_host(shost);
+ return retval;
+
+addhost_failed:
+ mpi3mr_cleanup_ioc(mrioc);
+out_iocinit_failed:
+ spin_lock(&mrioc_list_lock);
+ list_del(&mrioc->list);
+ spin_unlock(&mrioc_list_lock);
+ scsi_host_put(shost);
+shost_failed:
+ return retval;
+}
+
+/**
+ * mpi3mr_remove - PCI remove callback
+ * @pdev: PCI device instance
+ *
+ * Free up all memory and resources associated with the
+ * controllerand target devices, unregister the shost.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_remove(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct mpi3mr_ioc *mrioc;
+
+ mrioc = shost_priv(shost);
+ while (mrioc->reset_in_progress || mrioc->is_driver_loading)
+ ssleep(1);
+
+ scsi_remove_host(shost);
+
+ mpi3mr_cleanup_ioc(mrioc);
+
+ spin_lock(&mrioc_list_lock);
+ list_del(&mrioc->list);
+ spin_unlock(&mrioc_list_lock);
+
+ scsi_host_put(shost);
+}
+
+/**
+ * mpi3mr_shutdown - PCI shutdown callback
+ * @pdev: PCI device instance
+ *
+ * Free up all memory and resources associated with the
+ * controller
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_shutdown(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct mpi3mr_ioc *mrioc;
+
+ if (!shost)
+ return;
+
+ mrioc = shost_priv(shost);
+ while (mrioc->reset_in_progress || mrioc->is_driver_loading)
+ ssleep(1);
+
+ mpi3mr_cleanup_ioc(mrioc);
+}
+
+static const struct pci_device_id mpi3mr_pci_id_table[] = {
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_LSI_LOGIC, 0x00A5,
+ PCI_ANY_ID, PCI_ANY_ID)
+ },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, mpi3mr_pci_id_table);
+
+static struct pci_driver mpi3mr_pci_driver = {
+ .name = MPI3MR_DRIVER_NAME,
+ .id_table = mpi3mr_pci_id_table,
+ .probe = mpi3mr_probe,
+ .remove = mpi3mr_remove,
+ .shutdown = mpi3mr_shutdown,
+};
+
+static int __init mpi3mr_init(void)
+{
+ int ret_val;
+
+ pr_info("Loading %s version %s\n", MPI3MR_DRIVER_NAME,
+ MPI3MR_DRIVER_VERSION);
+
+ ret_val = pci_register_driver(&mpi3mr_pci_driver);
+
+ return ret_val;
+}
+
+static void __exit mpi3mr_exit(void)
+{
+ if (warn_non_secure_ctlr)
+ pr_warn(
+ "Unloading %s version %s while managing a non secure controller\n",
+ MPI3MR_DRIVER_NAME, MPI3MR_DRIVER_VERSION);
+ else
+ pr_info("Unloading %s version %s\n", MPI3MR_DRIVER_NAME,
+ MPI3MR_DRIVER_VERSION);
+
+ pci_unregister_driver(&mpi3mr_pci_driver);
+}
+
+module_init(mpi3mr_init);
+module_exit(mpi3mr_exit);
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* Re: [PATCH v5 02/24] mpi3mr: base driver code
2021-05-13 8:35 ` [PATCH v5 02/24] mpi3mr: base driver code Kashyap Desai
@ 2021-05-14 14:43 ` Tomas Henzl
2021-05-14 20:16 ` Himanshu Madhani
1 sibling, 0 replies; 38+ messages in thread
From: Tomas Henzl @ 2021-05-14 14:43 UTC (permalink / raw)
To: Kashyap Desai, linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash, bvanassche, hare,
himanshu.madhani
On 5/13/21 10:35 AM, Kashyap Desai wrote:
> This patch covers basic pci device driver requirements -
> device probe, memory allocation, mapping system registers,
> allocate irq lines etc.
>
> Source is managed in mainly three different files.
>
> mpi3mr_fw.c - Keep common code which interact with underlying fw/hw.
> mpi3mr_os.c - Keep common code which interact with scsi midlayer.
> mpi3mr_app.c - Keep common code which interact with application/ioctl.
> This is currently work in progress.
>
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> Reviewed-by: Hannes Reinecke <hare@suse.de>
> Cc: sathya.prakash@broadcom.com
> Cc: bvanassche@acm.org
> Cc: hare@suse.de
> Cc: thenzl@redhat.com
> Cc: himanshu.madhani@oracle.com
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 02/24] mpi3mr: base driver code
2021-05-13 8:35 ` [PATCH v5 02/24] mpi3mr: base driver code Kashyap Desai
2021-05-14 14:43 ` Tomas Henzl
@ 2021-05-14 20:16 ` Himanshu Madhani
1 sibling, 0 replies; 38+ messages in thread
From: Himanshu Madhani @ 2021-05-14 20:16 UTC (permalink / raw)
To: Kashyap Desai, linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash, bvanassche, hare, thenzl
On 5/13/21 3:35 AM, Kashyap Desai wrote:
> This patch covers basic pci device driver requirements -
> device probe, memory allocation, mapping system registers,
> allocate irq lines etc.
>
> Source is managed in mainly three different files.
>
> mpi3mr_fw.c - Keep common code which interact with underlying fw/hw.
> mpi3mr_os.c - Keep common code which interact with scsi midlayer.
> mpi3mr_app.c - Keep common code which interact with application/ioctl.
> This is currently work in progress.
>
> Signed-off-by: Kashyap Desai<kashyap.desai@broadcom.com>
> Reviewed-by: Hannes Reinecke<hare@suse.de>
> Cc:sathya.prakash@broadcom.com
> Cc:bvanassche@acm.org
> Cc:hare@suse.de
> Cc:thenzl@redhat.com
> Cc:himanshu.madhani@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
--
Himanshu Madhani Oracle Linux Engineering
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 03/24] mpi3mr: create operational request and reply queue pair
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 01/24] mpi3mr: add mpi30 Rev-R headers and Kconfig Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 02/24] mpi3mr: base driver code Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 04/24] mpi3mr: add support of queue command processing Kashyap Desai
` (20 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 24867 bytes --]
Create operational request and reply queue pair.
The MPI3 transport interface consists of an Administrative Request Queue,
an Administrative Reply Queue, and Operational Messaging Queues.
The Operational Messaging Queues are the primary communication mechanism
between the host and the I/O Controller (IOC).
Request messages, allocated in host memory, identify I/O operations to be
performed by the IOC. These operations are queued on an Operational
Request Queue by the host driver.
Reply descriptors track I/O operations as they complete.
The IOC queues these completions in an Operational Reply Queue.
To fulfil large contiguous memory requirement, driver creates multiple
segments and provide the list of segments. Each segment size should be 4K
which is h/w requirement. An element array is contiguous or segmented.
A contiguous element array is located in contiguous physical memory.
A contiguous element array must be aligned on an element size boundary.
An element's physical address within the array may be directly calculated
from the base address, the Producer/Consumer index, and the element size.
Expected phased identifier bit is used to find out valid entry on reply
queue. Driver set <ephase> bit and IOC invert the value of this bit on
each pass.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 56 +++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 596 ++++++++++++++++++++++++++++++++
drivers/scsi/mpi3mr/mpi3mr_os.c | 4 +-
3 files changed, 655 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index e33bb145204d..859b630371dd 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -71,6 +71,12 @@ extern struct list_head mrioc_list;
#define MPI3MR_ADMIN_REQ_FRAME_SZ 128
#define MPI3MR_ADMIN_REPLY_FRAME_SZ 16
+/* Operational queue management definitions */
+#define MPI3MR_OP_REQ_Q_QD 512
+#define MPI3MR_OP_REP_Q_QD 4096
+#define MPI3MR_OP_REQ_Q_SEG_SIZE 4096
+#define MPI3MR_OP_REP_Q_SEG_SIZE 4096
+#define MPI3MR_MAX_SEG_LIST_SIZE 4096
/* Reserved Host Tag definitions */
#define MPI3MR_HOSTTAG_INVALID 0xFFFF
@@ -132,6 +138,9 @@ extern struct list_head mrioc_list;
(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
MPI3_SGE_FLAGS_END_OF_LIST)
+/* MSI Index from Reply Queue Index */
+#define REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, offset) (qidx + offset)
+
/* IOC State definitions */
enum mpi3mr_iocstate {
MRIOC_STATE_READY = 1,
@@ -222,15 +231,45 @@ struct mpi3mr_ioc_facts {
u8 sge_mod_shift;
};
+/**
+ * struct segments - memory descriptor structure to store
+ * virtual and dma addresses for operational queue segments.
+ *
+ * @segment: virtual address
+ * @segment_dma: dma address
+ */
+struct segments {
+ void *segment;
+ dma_addr_t segment_dma;
+};
+
/**
* struct op_req_qinfo - Operational Request Queue Information
*
* @ci: consumer index
* @pi: producer index
+ * @num_request: Maximum number of entries in the queue
+ * @qid: Queue Id starting from 1
+ * @reply_qid: Associated reply queue Id
+ * @num_segments: Number of discontiguous memory segments
+ * @segment_qd: Depth of each segments
+ * @q_lock: Concurrent queue access lock
+ * @q_segments: Segment descriptor pointer
+ * @q_segment_list: Segment list base virtual address
+ * @q_segment_list_dma: Segment list base DMA address
*/
struct op_req_qinfo {
u16 ci;
u16 pi;
+ u16 num_requests;
+ u16 qid;
+ u16 reply_qid;
+ u16 num_segments;
+ u16 segment_qd;
+ spinlock_t q_lock;
+ struct segments *q_segments;
+ void *q_segment_list;
+ dma_addr_t q_segment_list_dma;
};
/**
@@ -238,10 +277,24 @@ struct op_req_qinfo {
*
* @ci: consumer index
* @qid: Queue Id starting from 1
+ * @num_replies: Maximum number of entries in the queue
+ * @num_segments: Number of discontiguous memory segments
+ * @segment_qd: Depth of each segments
+ * @q_segments: Segment descriptor pointer
+ * @q_segment_list: Segment list base virtual address
+ * @q_segment_list_dma: Segment list base DMA address
+ * @ephase: Expected phased identifier for the reply queue
*/
struct op_reply_qinfo {
u16 ci;
u16 qid;
+ u16 num_replies;
+ u16 num_segments;
+ u16 segment_qd;
+ struct segments *q_segments;
+ void *q_segment_list;
+ dma_addr_t q_segment_list_dma;
+ u8 ephase;
};
/**
@@ -401,6 +454,7 @@ struct scmd_priv {
* @current_event: Firmware event currently in process
* @driver_info: Driver, Kernel, OS information to firmware
* @change_count: Topology change count
+ * @op_reply_q_offset: Operational reply queue offset with MSIx
*/
struct mpi3mr_ioc {
struct list_head list;
@@ -408,6 +462,7 @@ struct mpi3mr_ioc {
struct Scsi_Host *shost;
u8 id;
int cpu_count;
+ bool enable_segqueue;
char name[MPI3MR_NAME_LENGTH];
char driver_name[MPI3MR_NAME_LENGTH];
@@ -494,6 +549,7 @@ struct mpi3mr_ioc {
struct mpi3mr_fwevt *current_event;
struct _mpi3_driver_info_layout driver_info;
u16 change_count;
+ u16 op_reply_q_offset;
};
int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index ed782887eb37..39941febbf9d 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -404,6 +404,7 @@ static int mpi3mr_setup_isr(struct mpi3mr_ioc *mrioc, u8 setup_one)
irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES;
+ mrioc->op_reply_q_offset = (max_vectors > 1) ? 1 : 0;
i = pci_alloc_irq_vectors_affinity(mrioc->pdev,
1, max_vectors, irq_flags, &desc);
if (i <= 0) {
@@ -414,6 +415,12 @@ static int mpi3mr_setup_isr(struct mpi3mr_ioc *mrioc, u8 setup_one)
ioc_info(mrioc,
"allocated vectors (%d) are less than configured (%d)\n",
i, max_vectors);
+ /*
+ * If only one MSI-x is allocated, then MSI-x 0 will be shared
+ * between Admin queue and operational queue
+ */
+ if (i == 1)
+ mrioc->op_reply_q_offset = 0;
max_vectors = i;
}
@@ -719,6 +726,582 @@ int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req,
return retval;
}
+/**
+ * mpi3mr_free_op_req_q_segments - free request memory segments
+ * @mrioc: Adapter instance reference
+ * @q_idx: operational request queue index
+ *
+ * Free memory segments allocated for operational request queue
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_free_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx)
+{
+ u16 j;
+ int size;
+ struct segments *segments;
+
+ segments = mrioc->req_qinfo[q_idx].q_segments;
+ if (!segments)
+ return;
+
+ if (mrioc->enable_segqueue) {
+ size = MPI3MR_OP_REQ_Q_SEG_SIZE;
+ if (mrioc->req_qinfo[q_idx].q_segment_list) {
+ dma_free_coherent(&mrioc->pdev->dev,
+ MPI3MR_MAX_SEG_LIST_SIZE,
+ mrioc->req_qinfo[q_idx].q_segment_list,
+ mrioc->req_qinfo[q_idx].q_segment_list_dma);
+ mrioc->op_reply_qinfo[q_idx].q_segment_list = NULL;
+ }
+ } else
+ size = mrioc->req_qinfo[q_idx].num_requests *
+ mrioc->facts.op_req_sz;
+
+ for (j = 0; j < mrioc->req_qinfo[q_idx].num_segments; j++) {
+ if (!segments[j].segment)
+ continue;
+ dma_free_coherent(&mrioc->pdev->dev,
+ size, segments[j].segment, segments[j].segment_dma);
+ segments[j].segment = NULL;
+ }
+ kfree(mrioc->req_qinfo[q_idx].q_segments);
+ mrioc->req_qinfo[q_idx].q_segments = NULL;
+ mrioc->req_qinfo[q_idx].qid = 0;
+}
+
+/**
+ * mpi3mr_free_op_reply_q_segments - free reply memory segments
+ * @mrioc: Adapter instance reference
+ * @q_idx: operational reply queue index
+ *
+ * Free memory segments allocated for operational reply queue
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_free_op_reply_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx)
+{
+ u16 j;
+ int size;
+ struct segments *segments;
+
+ segments = mrioc->op_reply_qinfo[q_idx].q_segments;
+ if (!segments)
+ return;
+
+ if (mrioc->enable_segqueue) {
+ size = MPI3MR_OP_REP_Q_SEG_SIZE;
+ if (mrioc->op_reply_qinfo[q_idx].q_segment_list) {
+ dma_free_coherent(&mrioc->pdev->dev,
+ MPI3MR_MAX_SEG_LIST_SIZE,
+ mrioc->op_reply_qinfo[q_idx].q_segment_list,
+ mrioc->op_reply_qinfo[q_idx].q_segment_list_dma);
+ mrioc->op_reply_qinfo[q_idx].q_segment_list = NULL;
+ }
+ } else
+ size = mrioc->op_reply_qinfo[q_idx].segment_qd *
+ mrioc->op_reply_desc_sz;
+
+ for (j = 0; j < mrioc->op_reply_qinfo[q_idx].num_segments; j++) {
+ if (!segments[j].segment)
+ continue;
+ dma_free_coherent(&mrioc->pdev->dev,
+ size, segments[j].segment, segments[j].segment_dma);
+ segments[j].segment = NULL;
+ }
+
+ kfree(mrioc->op_reply_qinfo[q_idx].q_segments);
+ mrioc->op_reply_qinfo[q_idx].q_segments = NULL;
+ mrioc->op_reply_qinfo[q_idx].qid = 0;
+}
+
+/**
+ * mpi3mr_delete_op_reply_q - delete operational reply queue
+ * @mrioc: Adapter instance reference
+ * @qidx: operational reply queue index
+ *
+ * Delete operatinal reply queue by issuing MPI request
+ * through admin queue.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_delete_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx)
+{
+ struct _mpi3_delete_reply_queue_request delq_req;
+ int retval = 0;
+ u16 reply_qid = 0, midx;
+
+ reply_qid = mrioc->op_reply_qinfo[qidx].qid;
+
+ midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, mrioc->op_reply_q_offset);
+
+ if (!reply_qid) {
+ retval = -1;
+ ioc_err(mrioc, "Issue DelRepQ: called with invalid ReqQID\n");
+ goto out;
+ }
+
+ memset(&delq_req, 0, sizeof(delq_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "Issue DelRepQ: Init command is in use\n");
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ delq_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ delq_req.function = MPI3_FUNCTION_DELETE_REPLY_QUEUE;
+ delq_req.queue_id = cpu_to_le16(reply_qid);
+
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &delq_req, sizeof(delq_req),
+ 1);
+ if (retval) {
+ ioc_err(mrioc, "Issue DelRepQ: Admin Post failed\n");
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "Issue DelRepQ: command timed out\n");
+ mpi3mr_set_diagsave(mrioc);
+ mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+ MPI3MR_RESET_FROM_DELREPQ_TIMEOUT);
+ mrioc->unrecoverable = 1;
+
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "Issue DelRepQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+ mrioc->intr_info[midx].op_reply_q = NULL;
+
+ mpi3mr_free_op_reply_q_segments(mrioc, qidx);
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+
+ return retval;
+}
+
+/**
+ * mpi3mr_alloc_op_reply_q_segments -Alloc segmented reply pool
+ * @mrioc: Adapter instance reference
+ * @qidx: request queue index
+ *
+ * Allocate segmented memory pools for operational reply
+ * queue.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_alloc_op_reply_q_segments(struct mpi3mr_ioc *mrioc, u16 qidx)
+{
+ struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx;
+ int i, size;
+ u64 *q_segment_list_entry = NULL;
+ struct segments *segments;
+
+ if (mrioc->enable_segqueue) {
+ op_reply_q->segment_qd =
+ MPI3MR_OP_REP_Q_SEG_SIZE / mrioc->op_reply_desc_sz;
+
+ size = MPI3MR_OP_REP_Q_SEG_SIZE;
+
+ op_reply_q->q_segment_list = dma_alloc_coherent(&mrioc->pdev->dev,
+ MPI3MR_MAX_SEG_LIST_SIZE, &op_reply_q->q_segment_list_dma,
+ GFP_KERNEL);
+ if (!op_reply_q->q_segment_list)
+ return -ENOMEM;
+ q_segment_list_entry = (u64 *)op_reply_q->q_segment_list;
+ } else {
+ op_reply_q->segment_qd = op_reply_q->num_replies;
+ size = op_reply_q->num_replies * mrioc->op_reply_desc_sz;
+ }
+
+ op_reply_q->num_segments = DIV_ROUND_UP(op_reply_q->num_replies,
+ op_reply_q->segment_qd);
+
+ op_reply_q->q_segments = kcalloc(op_reply_q->num_segments,
+ sizeof(struct segments), GFP_KERNEL);
+ if (!op_reply_q->q_segments)
+ return -ENOMEM;
+
+ segments = op_reply_q->q_segments;
+ for (i = 0; i < op_reply_q->num_segments; i++) {
+ segments[i].segment =
+ dma_alloc_coherent(&mrioc->pdev->dev,
+ size, &segments[i].segment_dma, GFP_KERNEL);
+ if (!segments[i].segment)
+ return -ENOMEM;
+ if (mrioc->enable_segqueue)
+ q_segment_list_entry[i] =
+ (unsigned long)segments[i].segment_dma;
+ }
+
+ return 0;
+}
+
+/**
+ * mpi3mr_alloc_op_req_q_segments - Alloc segmented req pool.
+ * @mrioc: Adapter instance reference
+ * @qidx: request queue index
+ *
+ * Allocate segmented memory pools for operational request
+ * queue.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_alloc_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 qidx)
+{
+ struct op_req_qinfo *op_req_q = mrioc->req_qinfo + qidx;
+ int i, size;
+ u64 *q_segment_list_entry = NULL;
+ struct segments *segments;
+
+ if (mrioc->enable_segqueue) {
+ op_req_q->segment_qd =
+ MPI3MR_OP_REQ_Q_SEG_SIZE / mrioc->facts.op_req_sz;
+
+ size = MPI3MR_OP_REQ_Q_SEG_SIZE;
+
+ op_req_q->q_segment_list = dma_alloc_coherent(&mrioc->pdev->dev,
+ MPI3MR_MAX_SEG_LIST_SIZE, &op_req_q->q_segment_list_dma,
+ GFP_KERNEL);
+ if (!op_req_q->q_segment_list)
+ return -ENOMEM;
+ q_segment_list_entry = (u64 *)op_req_q->q_segment_list;
+
+ } else {
+ op_req_q->segment_qd = op_req_q->num_requests;
+ size = op_req_q->num_requests * mrioc->facts.op_req_sz;
+ }
+
+ op_req_q->num_segments = DIV_ROUND_UP(op_req_q->num_requests,
+ op_req_q->segment_qd);
+
+ op_req_q->q_segments = kcalloc(op_req_q->num_segments,
+ sizeof(struct segments), GFP_KERNEL);
+ if (!op_req_q->q_segments)
+ return -ENOMEM;
+
+ segments = op_req_q->q_segments;
+ for (i = 0; i < op_req_q->num_segments; i++) {
+ segments[i].segment =
+ dma_alloc_coherent(&mrioc->pdev->dev,
+ size, &segments[i].segment_dma, GFP_KERNEL);
+ if (!segments[i].segment)
+ return -ENOMEM;
+ if (mrioc->enable_segqueue)
+ q_segment_list_entry[i] =
+ (unsigned long)segments[i].segment_dma;
+ }
+
+ return 0;
+}
+
+/**
+ * mpi3mr_create_op_reply_q - create operational reply queue
+ * @mrioc: Adapter instance reference
+ * @qidx: operational reply queue index
+ *
+ * Create operatinal reply queue by issuing MPI request
+ * through admin queue.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_create_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx)
+{
+ struct _mpi3_create_reply_queue_request create_req;
+ struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx;
+ int retval = 0;
+ u16 reply_qid = 0, midx;
+
+ reply_qid = op_reply_q->qid;
+
+ midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, mrioc->op_reply_q_offset);
+
+ if (reply_qid) {
+ retval = -1;
+ ioc_err(mrioc, "CreateRepQ: called for duplicate qid %d\n",
+ reply_qid);
+
+ return retval;
+ }
+
+ reply_qid = qidx + 1;
+ op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD;
+ op_reply_q->ci = 0;
+ op_reply_q->ephase = 1;
+
+ if (!op_reply_q->q_segments) {
+ retval = mpi3mr_alloc_op_reply_q_segments(mrioc, qidx);
+ if (retval) {
+ mpi3mr_free_op_reply_q_segments(mrioc, qidx);
+ goto out;
+ }
+ }
+
+ memset(&create_req, 0, sizeof(create_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "CreateRepQ: Init command is in use\n");
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ create_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ create_req.function = MPI3_FUNCTION_CREATE_REPLY_QUEUE;
+ create_req.queue_id = cpu_to_le16(reply_qid);
+ create_req.flags = MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE;
+ create_req.msix_index = cpu_to_le16(mrioc->intr_info[midx].msix_index);
+ if (mrioc->enable_segqueue) {
+ create_req.flags |=
+ MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED;
+ create_req.base_address = cpu_to_le64(
+ op_reply_q->q_segment_list_dma);
+ } else
+ create_req.base_address = cpu_to_le64(
+ op_reply_q->q_segments[0].segment_dma);
+
+ create_req.size = cpu_to_le16(op_reply_q->num_replies);
+
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &create_req,
+ sizeof(create_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "CreateRepQ: Admin Post failed\n");
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "CreateRepQ: command timed out\n");
+ mpi3mr_set_diagsave(mrioc);
+ mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+ MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT);
+ mrioc->unrecoverable = 1;
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "CreateRepQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+ op_reply_q->qid = reply_qid;
+ mrioc->intr_info[midx].op_reply_q = op_reply_q;
+
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+
+ return retval;
+}
+
+/**
+ * mpi3mr_create_op_req_q - create operational request queue
+ * @mrioc: Adapter instance reference
+ * @idx: operational request queue index
+ * @reply_qid: Reply queue ID
+ *
+ * Create operatinal request queue by issuing MPI request
+ * through admin queue.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_create_op_req_q(struct mpi3mr_ioc *mrioc, u16 idx,
+ u16 reply_qid)
+{
+ struct _mpi3_create_request_queue_request create_req;
+ struct op_req_qinfo *op_req_q = mrioc->req_qinfo + idx;
+ int retval = 0;
+ u16 req_qid = 0;
+
+ req_qid = op_req_q->qid;
+
+ if (req_qid) {
+ retval = -1;
+ ioc_err(mrioc, "CreateReqQ: called for duplicate qid %d\n",
+ req_qid);
+
+ return retval;
+ }
+ req_qid = idx + 1;
+
+ op_req_q->num_requests = MPI3MR_OP_REQ_Q_QD;
+ op_req_q->ci = 0;
+ op_req_q->pi = 0;
+ op_req_q->reply_qid = reply_qid;
+ spin_lock_init(&op_req_q->q_lock);
+
+ if (!op_req_q->q_segments) {
+ retval = mpi3mr_alloc_op_req_q_segments(mrioc, idx);
+ if (retval) {
+ mpi3mr_free_op_req_q_segments(mrioc, idx);
+ goto out;
+ }
+ }
+
+ memset(&create_req, 0, sizeof(create_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "CreateReqQ: Init command is in use\n");
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ create_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ create_req.function = MPI3_FUNCTION_CREATE_REQUEST_QUEUE;
+ create_req.queue_id = cpu_to_le16(req_qid);
+ if (mrioc->enable_segqueue) {
+ create_req.flags =
+ MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED;
+ create_req.base_address = cpu_to_le64(
+ op_req_q->q_segment_list_dma);
+ } else
+ create_req.base_address = cpu_to_le64(
+ op_req_q->q_segments[0].segment_dma);
+ create_req.reply_queue_id = cpu_to_le16(reply_qid);
+ create_req.size = cpu_to_le16(op_req_q->num_requests);
+
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &create_req,
+ sizeof(create_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "CreateReqQ: Admin Post failed\n");
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "CreateReqQ: command timed out\n");
+ mpi3mr_set_diagsave(mrioc);
+ if (mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+ MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT))
+ mrioc->unrecoverable = 1;
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "CreateReqQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+ op_req_q->qid = req_qid;
+
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+
+ return retval;
+}
+
+/**
+ * mpi3mr_create_op_queues - create operational queue pairs
+ * @mrioc: Adapter instance reference
+ *
+ * Allocate memory for operational queue meta data and call
+ * create request and reply queue functions.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_create_op_queues(struct mpi3mr_ioc *mrioc)
+{
+ int retval = 0;
+ u16 num_queues = 0, i = 0, msix_count_op_q = 1;
+
+ num_queues = min_t(int, mrioc->facts.max_op_reply_q,
+ mrioc->facts.max_op_req_q);
+
+ msix_count_op_q =
+ mrioc->intr_info_count - mrioc->op_reply_q_offset;
+ if (!mrioc->num_queues)
+ mrioc->num_queues = min_t(int, num_queues, msix_count_op_q);
+ num_queues = mrioc->num_queues;
+ ioc_info(mrioc, "Trying to create %d Operational Q pairs\n",
+ num_queues);
+
+ if (!mrioc->req_qinfo) {
+ mrioc->req_qinfo = kcalloc(num_queues,
+ sizeof(struct op_req_qinfo), GFP_KERNEL);
+ if (!mrioc->req_qinfo) {
+ retval = -1;
+ goto out_failed;
+ }
+
+ mrioc->op_reply_qinfo = kzalloc(sizeof(struct op_reply_qinfo) *
+ num_queues, GFP_KERNEL);
+ if (!mrioc->op_reply_qinfo) {
+ retval = -1;
+ goto out_failed;
+ }
+ }
+
+ if (mrioc->enable_segqueue)
+ ioc_info(mrioc,
+ "allocating operational queues through segmented queues\n");
+
+ for (i = 0; i < num_queues; i++) {
+ if (mpi3mr_create_op_reply_q(mrioc, i)) {
+ ioc_err(mrioc, "Cannot create OP RepQ %d\n", i);
+ break;
+ }
+ if (mpi3mr_create_op_req_q(mrioc, i,
+ mrioc->op_reply_qinfo[i].qid)) {
+ ioc_err(mrioc, "Cannot create OP ReqQ %d\n", i);
+ mpi3mr_delete_op_reply_q(mrioc, i);
+ break;
+ }
+ }
+
+ if (i == 0) {
+ /* Not even one queue is created successfully*/
+ retval = -1;
+ goto out_failed;
+ }
+ mrioc->num_op_reply_q = mrioc->num_op_req_q = i;
+ ioc_info(mrioc, "Successfully created %d Operational Q pairs\n",
+ mrioc->num_op_reply_q);
+
+ return retval;
+out_failed:
+ kfree(mrioc->req_qinfo);
+ mrioc->req_qinfo = NULL;
+
+ kfree(mrioc->op_reply_qinfo);
+ mrioc->op_reply_qinfo = NULL;
+
+ return retval;
+}
+
/**
* mpi3mr_setup_admin_qpair - Setup admin queue pair
* @mrioc: Adapter instance reference
@@ -1589,6 +2172,13 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
goto out_failed;
}
+ retval = mpi3mr_create_op_queues(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to create OpQueues error %d\n",
+ retval);
+ goto out_failed;
+ }
+
return retval;
out_failed:
@@ -1644,6 +2234,12 @@ static void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
mrioc->reply_free_q_pool = NULL;
}
+ for (i = 0; i < mrioc->num_op_req_q; i++)
+ mpi3mr_free_op_req_q_segments(mrioc, i);
+
+ for (i = 0; i < mrioc->num_op_reply_q; i++)
+ mpi3mr_free_op_reply_q_segments(mrioc, i);
+
for (i = 0; i < mrioc->intr_info_count; i++) {
intr_info = mrioc->intr_info + i;
if (intr_info)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 37517504bb33..bda5312e6f2f 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -40,7 +40,7 @@ static int mpi3mr_map_queues(struct Scsi_Host *shost)
struct mpi3mr_ioc *mrioc = shost_priv(shost);
return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
- mrioc->pdev, 0);
+ mrioc->pdev, mrioc->op_reply_q_offset);
}
/**
@@ -218,6 +218,8 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init(&mrioc->sbq_lock);
mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
+ if (pdev->revision)
+ mrioc->enable_segqueue = true;
mrioc->logging_level = logging_level;
mrioc->shost = shost;
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 04/24] mpi3mr: add support of queue command processing
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (2 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 03/24] mpi3mr: create operational request and reply queue pair Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-14 11:41 ` Hannes Reinecke
2021-05-13 8:35 ` [PATCH v5 05/24] mpi3mr: add support of internal watchdog thread Kashyap Desai
` (19 subsequent siblings)
23 siblings, 1 reply; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash, hare
[-- Attachment #1: Type: text/plain, Size: 34509 bytes --]
Send Port Enable Request to FW for Device Discovery.
As part of port enable completion driver calls scan_start and
scan_finished hooks.
scsi layer reference like sdev, starget etc is added but actual
device discovery will be supported once driver add complete event
process handling (It is added in subsequent patches)
This patch provides interface which is used to interact with FW
via operational queue pairs.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
Cc: hare@suse.de
---
drivers/scsi/mpi3mr/mpi3mr.h | 51 +++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 244 ++++++++++++
drivers/scsi/mpi3mr/mpi3mr_os.c | 643 +++++++++++++++++++++++++++++++-
3 files changed, 936 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 859b630371dd..8804dd027086 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -96,6 +96,7 @@ extern struct list_head mrioc_list;
/* command/controller interaction timeout definitions in seconds */
#define MPI3MR_INTADMCMD_TIMEOUT 10
+#define MPI3MR_PORTENABLE_TIMEOUT 300
#define MPI3MR_RESETTM_TIMEOUT 30
#define MPI3MR_DEFAULT_SHUTDOWN_TIME 120
@@ -312,7 +313,43 @@ struct mpi3mr_intr_info {
char name[MPI3MR_NAME_LENGTH];
};
+/**
+ * struct mpi3mr_stgt_priv_data - SCSI target private structure
+ *
+ * @starget: Scsi_target pointer
+ * @dev_handle: FW device handle
+ * @perst_id: FW assigned Persistent ID
+ * @num_luns: Number of Logical Units
+ * @block_io: I/O blocked to the device or not
+ * @dev_removed: Device removed in the Firmware
+ * @dev_removedelay: Device is waiting to be removed in FW
+ * @dev_type: Device type
+ * @tgt_dev: Internal target device pointer
+ */
+struct mpi3mr_stgt_priv_data {
+ struct scsi_target *starget;
+ u16 dev_handle;
+ u16 perst_id;
+ u32 num_luns;
+ atomic_t block_io;
+ u8 dev_removed;
+ u8 dev_removedelay;
+ u8 dev_type;
+ struct mpi3mr_tgt_dev *tgt_dev;
+};
+/**
+ * struct mpi3mr_stgt_priv_data - SCSI device private structure
+ *
+ * @tgt_priv_data: Scsi_target private data pointer
+ * @lun_id: LUN ID of the device
+ * @ncq_prio_enable: NCQ priority enable for SATA device
+ */
+struct mpi3mr_sdev_priv_data {
+ struct mpi3mr_stgt_priv_data *tgt_priv_data;
+ u32 lun_id;
+ u8 ncq_prio_enable;
+};
/**
* struct mpi3mr_drv_cmd - Internal command tracker
@@ -442,12 +479,16 @@ struct scmd_priv {
* @sbq_lock: Sense buffer queue lock
* @sbq_host_index: Sense buffer queuehost index
* @is_driver_loading: Is driver still loading
+ * @scan_started: Async scan started
+ * @scan_failed: Asycn scan failed
+ * @stop_drv_processing: Stop all command processing
* @max_host_ios: Maximum host I/O count
* @chain_buf_count: Chain buffer count
* @chain_buf_pool: Chain buffer pool
* @chain_sgl_list: Chain SGL list
* @chain_bitmap_sz: Chain buffer allocator bitmap size
* @chain_bitmap: Chain buffer allocator bitmap
+ * @chain_buf_lock: Chain buffer list lock
* @reset_in_progress: Reset in progress flag
* @unrecoverable: Controller unrecoverable flag
* @logging_level: Controller debug logging level
@@ -532,6 +573,9 @@ struct mpi3mr_ioc {
u32 sbq_host_index;
u8 is_driver_loading;
+ u8 scan_started;
+ u16 scan_failed;
+ u8 stop_drv_processing;
u16 max_host_ios;
@@ -540,6 +584,7 @@ struct mpi3mr_ioc {
struct chain_element *chain_sgl_list;
u16 chain_bitmap_sz;
void *chain_bitmap;
+ spinlock_t chain_buf_lock;
u8 reset_in_progress;
u8 unrecoverable;
@@ -556,8 +601,11 @@ int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc);
int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc);
void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc);
+int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async);
int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req,
u16 admin_req_sz, u8 ignore_reset);
+int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
+ struct op_req_qinfo *opreqq, u8 *req);
void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length,
dma_addr_t dma_addr);
void mpi3mr_build_zero_len_sge(void *paddr);
@@ -568,6 +616,9 @@ void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc,
void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
u64 sense_buf_dma);
+void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_default_reply_descriptor *reply_desc,
+ u64 *reply_dma, u16 qidx);
void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc);
void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc);
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 39941febbf9d..7779e2b965e6 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -25,6 +25,22 @@ static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr)
}
#endif
+static inline bool
+mpi3mr_check_req_qfull(struct op_req_qinfo *op_req_q)
+{
+ u16 pi, ci, max_entries;
+ bool is_qfull = false;
+
+ pi = op_req_q->pi;
+ ci = READ_ONCE(op_req_q->ci);
+ max_entries = op_req_q->num_requests;
+
+ if ((ci == (pi + 1)) || ((!ci) && (pi == (max_entries - 1))))
+ is_qfull = true;
+
+ return is_qfull;
+}
+
static void mpi3mr_sync_irqs(struct mpi3mr_ioc *mrioc)
{
u16 i, max_vectors;
@@ -283,6 +299,83 @@ static int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
return num_admin_replies;
}
+/**
+ * mpi3mr_get_reply_desc - get reply descriptor frame corresponding to
+ * queue's consumer index from operational reply descriptor queue.
+ * @op_reply_q: op_reply_qinfo object
+ * @reply_ci: operational reply descriptor's queue consumer index
+ *
+ * Returns reply descriptor frame address
+ */
+static inline struct _mpi3_default_reply_descriptor *
+mpi3mr_get_reply_desc(struct op_reply_qinfo *op_reply_q, u32 reply_ci)
+{
+ void *segment_base_addr;
+ struct segments *segments = op_reply_q->q_segments;
+ struct _mpi3_default_reply_descriptor *reply_desc = NULL;
+
+ segment_base_addr =
+ segments[reply_ci / op_reply_q->segment_qd].segment;
+ reply_desc = (struct _mpi3_default_reply_descriptor *)segment_base_addr +
+ (reply_ci % op_reply_q->segment_qd);
+ return reply_desc;
+}
+
+static int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_intr_info *intr_info)
+{
+ struct op_reply_qinfo *op_reply_q = intr_info->op_reply_q;
+ struct op_req_qinfo *op_req_q;
+ u32 exp_phase;
+ u32 reply_ci;
+ u32 num_op_reply = 0;
+ u64 reply_dma = 0;
+ struct _mpi3_default_reply_descriptor *reply_desc;
+ u16 req_q_idx = 0, reply_qidx;
+
+ reply_qidx = op_reply_q->qid - 1;
+
+ exp_phase = op_reply_q->ephase;
+ reply_ci = op_reply_q->ci;
+
+ reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci);
+ if ((le16_to_cpu(reply_desc->reply_flags) &
+ MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) {
+ return 0;
+ }
+
+ do {
+ req_q_idx = le16_to_cpu(reply_desc->request_queue_id) - 1;
+ op_req_q = &mrioc->req_qinfo[req_q_idx];
+
+ WRITE_ONCE(op_req_q->ci, le16_to_cpu(reply_desc->request_queue_ci));
+ mpi3mr_process_op_reply_desc(mrioc, reply_desc, &reply_dma,
+ reply_qidx);
+ if (reply_dma)
+ mpi3mr_repost_reply_buf(mrioc, reply_dma);
+ num_op_reply++;
+
+ if (++reply_ci == op_reply_q->num_replies) {
+ reply_ci = 0;
+ exp_phase ^= 1;
+ }
+
+ reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci);
+
+ if ((le16_to_cpu(reply_desc->reply_flags) &
+ MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase)
+ break;
+
+ } while (1);
+
+ writel(reply_ci,
+ &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].consumer_index);
+ op_reply_q->ci = reply_ci;
+ op_reply_q->ephase = exp_phase;
+
+ return num_op_reply;
+}
+
static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata)
{
struct mpi3mr_intr_info *intr_info = privdata;
@@ -1302,6 +1395,74 @@ static int mpi3mr_create_op_queues(struct mpi3mr_ioc *mrioc)
return retval;
}
+/**
+ * mpi3mr_op_request_post - Post request to operational queue
+ * @mrioc: Adapter reference
+ * @op_req_q: Operational request queue info
+ * @req: MPI3 request
+ *
+ * Post the MPI3 request into operational request queue and
+ * inform the controller, if the queue is full return
+ * appropriate error.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
+ struct op_req_qinfo *op_req_q, u8 *req)
+{
+ u16 pi = 0, max_entries, reply_qidx = 0, midx;
+ int retval = 0;
+ unsigned long flags;
+ u8 *req_entry;
+ void *segment_base_addr;
+ u16 req_sz = mrioc->facts.op_req_sz;
+ struct segments *segments = op_req_q->q_segments;
+
+ reply_qidx = op_req_q->reply_qid - 1;
+
+ if (mrioc->unrecoverable)
+ return -EFAULT;
+
+ spin_lock_irqsave(&op_req_q->q_lock, flags);
+ pi = op_req_q->pi;
+ max_entries = op_req_q->num_requests;
+
+ if (mpi3mr_check_req_qfull(op_req_q)) {
+ midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(
+ reply_qidx, mrioc->op_reply_q_offset);
+ mpi3mr_process_op_reply_q(mrioc, &mrioc->intr_info[midx]);
+
+ if (mpi3mr_check_req_qfull(op_req_q)) {
+ retval = -EAGAIN;
+ goto out;
+ }
+ }
+
+ if (mrioc->reset_in_progress) {
+ ioc_err(mrioc, "OpReqQ submit reset in progress\n");
+ retval = -EAGAIN;
+ goto out;
+ }
+
+ segment_base_addr = segments[pi / op_req_q->segment_qd].segment;
+ req_entry = (u8 *)segment_base_addr +
+ ((pi % op_req_q->segment_qd) * req_sz);
+
+ memset(req_entry, 0, req_sz);
+ memcpy(req_entry, req, MPI3MR_ADMIN_REQ_FRAME_SZ);
+
+ if (++pi == max_entries)
+ pi = 0;
+ op_req_q->pi = pi;
+
+ writel(op_req_q->pi,
+ &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].producer_index);
+
+out:
+ spin_unlock_irqrestore(&op_req_q->q_lock, flags);
+ return retval;
+}
+
/**
* mpi3mr_setup_admin_qpair - Setup admin queue pair
* @mrioc: Adapter instance reference
@@ -1887,6 +2048,89 @@ static int mpi3mr_alloc_chain_bufs(struct mpi3mr_ioc *mrioc)
return retval;
}
+/**
+ * mpi3mr_port_enable_complete - Mark port enable complete
+ * @mrioc: Adapter instance reference
+ * @drv_cmd: Internal command tracker
+ *
+ * Call back for asynchronous port enable request sets the
+ * driver command to indicate port enable request is complete.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_port_enable_complete(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_drv_cmd *drv_cmd)
+{
+ drv_cmd->state = MPI3MR_CMD_NOTUSED;
+ drv_cmd->callback = NULL;
+ mrioc->scan_failed = drv_cmd->ioc_status;
+ mrioc->scan_started = 0;
+}
+
+/**
+ * mpi3mr_issue_port_enable - Issue Port Enable
+ * @mrioc: Adapter instance reference
+ * @async: Flag to wait for completion or not
+ *
+ * Issue Port Enable MPI request through admin queue and if the
+ * async flag is not set wait for the completion of the port
+ * enable or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async)
+{
+ struct _mpi3_port_enable_request pe_req;
+ int retval = 0;
+ u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT;
+
+ memset(&pe_req, 0, sizeof(pe_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "Issue PortEnable: Init command is in use\n");
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ if (async) {
+ mrioc->init_cmds.is_waiting = 0;
+ mrioc->init_cmds.callback = mpi3mr_port_enable_complete;
+ } else {
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ init_completion(&mrioc->init_cmds.done);
+ }
+ pe_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ pe_req.function = MPI3_FUNCTION_PORT_ENABLE;
+
+ retval = mpi3mr_admin_request_post(mrioc, &pe_req, sizeof(pe_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "Issue PortEnable: Admin Post failed\n");
+ goto out_unlock;
+ }
+ if (!async) {
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (pe_timeout * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "Issue PortEnable: command timed out\n");
+ retval = -1;
+ mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR;
+ mpi3mr_set_diagsave(mrioc);
+ mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+ MPI3MR_RESET_FROM_PE_TIMEOUT);
+ mrioc->unrecoverable = 1;
+ goto out_unlock;
+ }
+ mpi3mr_port_enable_complete(mrioc, &mrioc->init_cmds);
+ }
+out_unlock:
+ mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+ return retval;
+}
+
/**
* mpi3mr_cleanup_resources - Free PCI resources
* @mrioc: Adapter instance reference
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index bda5312e6f2f..7b3072e72c79 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -26,6 +26,471 @@ module_param(logging_level, int, 0);
MODULE_PARM_DESC(logging_level,
" bits for enabling additional logging info (default=0)");
+/* Forward declarations*/
+/**
+ * mpi3mr_host_tag_for_scmd - Get host tag for a scmd
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ *
+ * Calculate the host tag based on block tag for a given scmd.
+ *
+ * Return: Valid host tag or MPI3MR_HOSTTAG_INVALID.
+ */
+static u16 mpi3mr_host_tag_for_scmd(struct mpi3mr_ioc *mrioc,
+ struct scsi_cmnd *scmd)
+{
+ struct scmd_priv *priv = NULL;
+ u32 unique_tag;
+ u16 host_tag, hw_queue;
+
+ unique_tag = blk_mq_unique_tag(scmd->request);
+
+ hw_queue = blk_mq_unique_tag_to_hwq(unique_tag);
+ if (hw_queue >= mrioc->num_op_reply_q)
+ return MPI3MR_HOSTTAG_INVALID;
+ host_tag = blk_mq_unique_tag_to_tag(unique_tag);
+
+ if (WARN_ON(host_tag >= mrioc->max_host_ios))
+ return MPI3MR_HOSTTAG_INVALID;
+
+ priv = scsi_cmd_priv(scmd);
+ /*host_tag 0 is invalid hence incrementing by 1*/
+ priv->host_tag = host_tag + 1;
+ priv->scmd = scmd;
+ priv->in_lld_scope = 1;
+ priv->req_q_idx = hw_queue;
+ priv->chain_idx = -1;
+ return priv->host_tag;
+}
+
+/**
+ * mpi3mr_scmd_from_host_tag - Get SCSI command from host tag
+ * @mrioc: Adapter instance reference
+ * @host_tag: Host tag
+ * @qidx: Operational queue index
+ *
+ * Identify the block tag from the host tag and queue index and
+ * retrieve associated scsi command using scsi_host_find_tag().
+ *
+ * Return: SCSI command reference or NULL.
+ */
+static struct scsi_cmnd *mpi3mr_scmd_from_host_tag(
+ struct mpi3mr_ioc *mrioc, u16 host_tag, u16 qidx)
+{
+ struct scsi_cmnd *scmd = NULL;
+ struct scmd_priv *priv = NULL;
+ u32 unique_tag = host_tag - 1;
+
+ if (WARN_ON(host_tag > mrioc->max_host_ios))
+ goto out;
+
+ unique_tag |= (qidx << BLK_MQ_UNIQUE_TAG_BITS);
+
+ scmd = scsi_host_find_tag(mrioc->shost, unique_tag);
+ if (scmd) {
+ priv = scsi_cmd_priv(scmd);
+ if (!priv->in_lld_scope)
+ scmd = NULL;
+ }
+out:
+ return scmd;
+}
+
+/**
+ * mpi3mr_clear_scmd_priv - Cleanup SCSI command private date
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ *
+ * Invalidate the SCSI command private data to mark the command
+ * is not in LLD scope anymore.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_clear_scmd_priv(struct mpi3mr_ioc *mrioc,
+ struct scsi_cmnd *scmd)
+{
+ struct scmd_priv *priv = NULL;
+
+ priv = scsi_cmd_priv(scmd);
+
+ if (WARN_ON(priv->in_lld_scope == 0))
+ return;
+ priv->host_tag = MPI3MR_HOSTTAG_INVALID;
+ priv->req_q_idx = 0xFFFF;
+ priv->scmd = NULL;
+ priv->in_lld_scope = 0;
+ if (priv->chain_idx >= 0) {
+ clear_bit(priv->chain_idx, mrioc->chain_bitmap);
+ priv->chain_idx = -1;
+ }
+}
+
+/**
+ * mpi3mr_process_op_reply_desc - reply descriptor handler
+ * @mrioc: Adapter instance reference
+ * @reply_desc: Operational reply descriptor
+ * @reply_dma: place holder for reply DMA address
+ * @qidx: Operational queue index
+ *
+ * Process the operational reply descriptor and identifies the
+ * descriptor type. Based on the descriptor map the MPI3 request
+ * status to a SCSI command status and calls scsi_done call
+ * back.
+ *
+ * Return: Nothing
+ */
+void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_default_reply_descriptor *reply_desc, u64 *reply_dma, u16 qidx)
+{
+ u16 reply_desc_type, host_tag = 0;
+ u16 ioc_status = MPI3_IOCSTATUS_SUCCESS;
+ u32 ioc_loginfo = 0;
+ struct _mpi3_status_reply_descriptor *status_desc = NULL;
+ struct _mpi3_address_reply_descriptor *addr_desc = NULL;
+ struct _mpi3_success_reply_descriptor *success_desc = NULL;
+ struct _mpi3_scsi_io_reply *scsi_reply = NULL;
+ struct scsi_cmnd *scmd = NULL;
+ struct scmd_priv *priv = NULL;
+ u8 *sense_buf = NULL;
+ u8 scsi_state = 0, scsi_status = 0, sense_state = 0;
+ u32 xfer_count = 0, sense_count = 0, resp_data = 0;
+ u16 dev_handle = 0xFFFF;
+ struct scsi_sense_hdr sshdr;
+
+ *reply_dma = 0;
+ reply_desc_type = le16_to_cpu(reply_desc->reply_flags) &
+ MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK;
+ switch (reply_desc_type) {
+ case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS:
+ status_desc = (struct _mpi3_status_reply_descriptor *)reply_desc;
+ host_tag = le16_to_cpu(status_desc->host_tag);
+ ioc_status = le16_to_cpu(status_desc->ioc_status);
+ if (ioc_status &
+ MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL)
+ ioc_loginfo = le32_to_cpu(status_desc->ioc_log_info);
+ ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK;
+ break;
+ case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY:
+ addr_desc = (struct _mpi3_address_reply_descriptor *)reply_desc;
+ *reply_dma = le64_to_cpu(addr_desc->reply_frame_address);
+ scsi_reply = mpi3mr_get_reply_virt_addr(mrioc,
+ *reply_dma);
+ if (!scsi_reply) {
+ panic("%s: scsi_reply is NULL, this shouldn't happen\n",
+ mrioc->name);
+ goto out;
+ }
+ host_tag = le16_to_cpu(scsi_reply->host_tag);
+ ioc_status = le16_to_cpu(scsi_reply->ioc_status);
+ scsi_status = scsi_reply->scsi_status;
+ scsi_state = scsi_reply->scsi_state;
+ dev_handle = le16_to_cpu(scsi_reply->dev_handle);
+ sense_state = (scsi_state & MPI3_SCSI_STATE_SENSE_MASK);
+ xfer_count = le32_to_cpu(scsi_reply->transfer_count);
+ sense_count = le32_to_cpu(scsi_reply->sense_count);
+ resp_data = le32_to_cpu(scsi_reply->response_data);
+ sense_buf = mpi3mr_get_sensebuf_virt_addr(mrioc,
+ le64_to_cpu(scsi_reply->sense_data_buffer_address));
+ if (ioc_status &
+ MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL)
+ ioc_loginfo = le32_to_cpu(scsi_reply->ioc_log_info);
+ ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK;
+ if (sense_state == MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY)
+ panic("%s: Ran out of sense buffers\n", mrioc->name);
+ break;
+ case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS:
+ success_desc = (struct _mpi3_success_reply_descriptor *)reply_desc;
+ host_tag = le16_to_cpu(success_desc->host_tag);
+ break;
+ default:
+ break;
+ }
+ scmd = mpi3mr_scmd_from_host_tag(mrioc, host_tag, qidx);
+ if (!scmd) {
+ panic("%s: Cannot Identify scmd for host_tag 0x%x\n",
+ mrioc->name, host_tag);
+ goto out;
+ }
+ priv = scsi_cmd_priv(scmd);
+ if (success_desc) {
+ scmd->result = DID_OK << 16;
+ goto out_success;
+ }
+ if (ioc_status == MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN &&
+ xfer_count == 0 && (scsi_status == MPI3_SCSI_STATUS_BUSY ||
+ scsi_status == MPI3_SCSI_STATUS_RESERVATION_CONFLICT ||
+ scsi_status == MPI3_SCSI_STATUS_TASK_SET_FULL))
+ ioc_status = MPI3_IOCSTATUS_SUCCESS;
+
+ if ((sense_state == MPI3_SCSI_STATE_SENSE_VALID) && sense_count &&
+ sense_buf) {
+ u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, sense_count);
+
+ memcpy(scmd->sense_buffer, sense_buf, sz);
+ }
+
+ switch (ioc_status) {
+ case MPI3_IOCSTATUS_BUSY:
+ case MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES:
+ scmd->result = SAM_STAT_BUSY;
+ break;
+ case MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+ scmd->result = DID_NO_CONNECT << 16;
+ break;
+ case MPI3_IOCSTATUS_SCSI_IOC_TERMINATED:
+ scmd->result = DID_SOFT_ERROR << 16;
+ break;
+ case MPI3_IOCSTATUS_SCSI_TASK_TERMINATED:
+ case MPI3_IOCSTATUS_SCSI_EXT_TERMINATED:
+ scmd->result = DID_RESET << 16;
+ break;
+ case MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+ if ((xfer_count == 0) || (scmd->underflow > xfer_count))
+ scmd->result = DID_SOFT_ERROR << 16;
+ else
+ scmd->result = (DID_OK << 16) | scsi_status;
+ break;
+ case MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN:
+ scmd->result = (DID_OK << 16) | scsi_status;
+ if (sense_state == MPI3_SCSI_STATE_SENSE_VALID)
+ break;
+ if (xfer_count < scmd->underflow) {
+ if (scsi_status == SAM_STAT_BUSY)
+ scmd->result = SAM_STAT_BUSY;
+ else
+ scmd->result = DID_SOFT_ERROR << 16;
+ } else if ((scsi_state & (MPI3_SCSI_STATE_NO_SCSI_STATUS)) ||
+ (sense_state != MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE))
+ scmd->result = DID_SOFT_ERROR << 16;
+ else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
+ scmd->result = DID_RESET << 16;
+ else if (!xfer_count && scmd->cmnd[0] == REPORT_LUNS) {
+ scsi_status = SAM_STAT_CHECK_CONDITION;
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scmd->sense_buffer[0] = 0x70;
+ scmd->sense_buffer[2] = ILLEGAL_REQUEST;
+ scmd->sense_buffer[12] = 0x20;
+ scmd->sense_buffer[13] = 0;
+ }
+ break;
+ case MPI3_IOCSTATUS_SCSI_DATA_OVERRUN:
+ scsi_set_resid(scmd, 0);
+ fallthrough;
+ case MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR:
+ case MPI3_IOCSTATUS_SUCCESS:
+ scmd->result = (DID_OK << 16) | scsi_status;
+ if ((scsi_state & (MPI3_SCSI_STATE_NO_SCSI_STATUS)) ||
+ (sense_state == MPI3_SCSI_STATE_SENSE_FAILED) ||
+ (sense_state == MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY))
+ scmd->result = DID_SOFT_ERROR << 16;
+ else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
+ scmd->result = DID_RESET << 16;
+ break;
+ case MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+ case MPI3_IOCSTATUS_INVALID_FUNCTION:
+ case MPI3_IOCSTATUS_INVALID_SGL:
+ case MPI3_IOCSTATUS_INTERNAL_ERROR:
+ case MPI3_IOCSTATUS_INVALID_FIELD:
+ case MPI3_IOCSTATUS_INVALID_STATE:
+ case MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR:
+ case MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+ case MPI3_IOCSTATUS_INSUFFICIENT_POWER:
+ default:
+ scmd->result = DID_SOFT_ERROR << 16;
+ break;
+ }
+
+ if (scmd->result != (DID_OK << 16) && (scmd->cmnd[0] != ATA_12) &&
+ (scmd->cmnd[0] != ATA_16)) {
+ ioc_info(mrioc, "%s :scmd->result 0x%x\n", __func__,
+ scmd->result);
+ scsi_print_command(scmd);
+ ioc_info(mrioc,
+ "%s :Command issued to handle 0x%02x returned with error 0x%04x loginfo 0x%08x, qid %d\n",
+ __func__, dev_handle, ioc_status, ioc_loginfo,
+ priv->req_q_idx + 1);
+ ioc_info(mrioc,
+ " host_tag %d scsi_state 0x%02x scsi_status 0x%02x, xfer_cnt %d resp_data 0x%x\n",
+ host_tag, scsi_state, scsi_status, xfer_count, resp_data);
+ if (sense_buf) {
+ scsi_normalize_sense(sense_buf, sense_count, &sshdr);
+ ioc_info(mrioc,
+ "%s :sense_count 0x%x, sense_key 0x%x ASC 0x%x, ASCQ 0x%x\n",
+ __func__, sense_count, sshdr.sense_key,
+ sshdr.asc, sshdr.ascq);
+ }
+ }
+out_success:
+ mpi3mr_clear_scmd_priv(mrioc, scmd);
+ scsi_dma_unmap(scmd);
+ scmd->scsi_done(scmd);
+out:
+ if (sense_buf)
+ mpi3mr_repost_sense_buf(mrioc,
+ le64_to_cpu(scsi_reply->sense_data_buffer_address));
+}
+
+/**
+ * mpi3mr_get_chain_idx - get free chain buffer index
+ * @mrioc: Adapter instance reference
+ *
+ * Try to get a free chain buffer index from the free pool.
+ *
+ * Return: -1 on failure or the free chain buffer index
+ */
+static int mpi3mr_get_chain_idx(struct mpi3mr_ioc *mrioc)
+{
+ u8 retry_count = 5;
+ int cmd_idx = -1;
+
+ do {
+ spin_lock(&mrioc->chain_buf_lock);
+ cmd_idx = find_first_zero_bit(mrioc->chain_bitmap,
+ mrioc->chain_buf_count);
+ if (cmd_idx < mrioc->chain_buf_count) {
+ set_bit(cmd_idx, mrioc->chain_bitmap);
+ spin_unlock(&mrioc->chain_buf_lock);
+ break;
+ }
+ spin_unlock(&mrioc->chain_buf_lock);
+ cmd_idx = -1;
+ } while (retry_count--);
+ return cmd_idx;
+}
+
+/**
+ * mpi3mr_prepare_sg_scmd - build scatter gather list
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ * @scsiio_req: MPI3 SCSI IO request
+ *
+ * This function maps SCSI command's data and protection SGEs to
+ * MPI request SGEs. If required additional 4K chain buffer is
+ * used to send the SGEs.
+ *
+ * Return: 0 on success, -ENOMEM on dma_map_sg failure
+ */
+static int mpi3mr_prepare_sg_scmd(struct mpi3mr_ioc *mrioc,
+ struct scsi_cmnd *scmd, struct _mpi3_scsi_io_request *scsiio_req)
+{
+ dma_addr_t chain_dma;
+ struct scatterlist *sg_scmd;
+ void *sg_local, *chain;
+ u32 chain_length;
+ int sges_left, chain_idx;
+ u32 sges_in_segment;
+ u8 simple_sgl_flags;
+ u8 simple_sgl_flags_last;
+ u8 last_chain_sgl_flags;
+ struct chain_element *chain_req;
+ struct scmd_priv *priv = NULL;
+
+ priv = scsi_cmd_priv(scmd);
+
+ simple_sgl_flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE |
+ MPI3_SGE_FLAGS_DLAS_SYSTEM;
+ simple_sgl_flags_last = simple_sgl_flags |
+ MPI3_SGE_FLAGS_END_OF_LIST;
+ last_chain_sgl_flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN |
+ MPI3_SGE_FLAGS_DLAS_SYSTEM;
+
+ sg_local = &scsiio_req->sgl;
+
+ if (!scsiio_req->data_length) {
+ mpi3mr_build_zero_len_sge(sg_local);
+ return 0;
+ }
+
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+
+ if (sges_left < 0) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "scsi_dma_map failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return -ENOMEM;
+ }
+ if (sges_left > MPI3MR_SG_DEPTH) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "scsi_dma_map returned unsupported sge count %d!\n",
+ sges_left);
+ return -ENOMEM;
+ }
+
+ sges_in_segment = (mrioc->facts.op_req_sz -
+ offsetof(struct _mpi3_scsi_io_request, sgl)) / sizeof(struct _mpi3_sge_common);
+
+ if (sges_left <= sges_in_segment)
+ goto fill_in_last_segment;
+
+ /* fill in main message segment when there is a chain following */
+ while (sges_in_segment > 1) {
+ mpi3mr_add_sg_single(sg_local, simple_sgl_flags,
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += sizeof(struct _mpi3_sge_common);
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ chain_idx = mpi3mr_get_chain_idx(mrioc);
+ if (chain_idx < 0)
+ return -1;
+ chain_req = &mrioc->chain_sgl_list[chain_idx];
+ priv->chain_idx = chain_idx;
+
+ chain = chain_req->addr;
+ chain_dma = chain_req->dma_addr;
+ sges_in_segment = sges_left;
+ chain_length = sges_in_segment * sizeof(struct _mpi3_sge_common);
+
+ mpi3mr_add_sg_single(sg_local, last_chain_sgl_flags,
+ chain_length, chain_dma);
+
+ sg_local = chain;
+
+fill_in_last_segment:
+ while (sges_left > 0) {
+ if (sges_left == 1)
+ mpi3mr_add_sg_single(sg_local,
+ simple_sgl_flags_last, sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ mpi3mr_add_sg_single(sg_local, simple_sgl_flags,
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += sizeof(struct _mpi3_sge_common);
+ sges_left--;
+ }
+
+ return 0;
+}
+
+/**
+ * mpi3mr_build_sg_scmd - build scatter gather list for SCSI IO
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ * @scsiio_req: MPI3 SCSI IO request
+ *
+ * This function calls mpi3mr_prepare_sg_scmd for constructing
+ * both data SGEs and protection information SGEs in the MPI
+ * format from the SCSI Command as appropriate .
+ *
+ * Return: return value of mpi3mr_prepare_sg_scmd.
+ */
+static int mpi3mr_build_sg_scmd(struct mpi3mr_ioc *mrioc,
+ struct scsi_cmnd *scmd, struct _mpi3_scsi_io_request *scsiio_req)
+{
+ int ret;
+
+ ret = mpi3mr_prepare_sg_scmd(mrioc, scmd, scsiio_req);
+ if (ret)
+ return ret;
+
+ return ret;
+}
+
/**
* mpi3mr_map_queues - Map queues callback handler
* @shost: SCSI host reference
@@ -43,6 +508,71 @@ static int mpi3mr_map_queues(struct Scsi_Host *shost)
mrioc->pdev, mrioc->op_reply_q_offset);
}
+/**
+ * mpi3mr_scan_start - Scan start callback handler
+ * @shost: SCSI host reference
+ *
+ * Issue port enable request asynchronously.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_scan_start(struct Scsi_Host *shost)
+{
+ struct mpi3mr_ioc *mrioc = shost_priv(shost);
+
+ mrioc->scan_started = 1;
+ ioc_info(mrioc, "%s :Issuing Port Enable\n", __func__);
+ if (mpi3mr_issue_port_enable(mrioc, 1)) {
+ ioc_err(mrioc, "%s :Issuing port enable failed\n", __func__);
+ mrioc->scan_started = 0;
+ mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR;
+ }
+}
+
+/**
+ * mpi3mr_scan_finished - Scan finished callback handler
+ * @shost: SCSI host reference
+ * @time: Jiffies from the scan start
+ *
+ * Checks whether the port enable is completed or timedout or
+ * failed and set the scan status accordingly after taking any
+ * recovery if required.
+ *
+ * Return: 1 on scan finished or timed out, 0 for in progress
+ */
+static int mpi3mr_scan_finished(struct Scsi_Host *shost,
+ unsigned long time)
+{
+ struct mpi3mr_ioc *mrioc = shost_priv(shost);
+ u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT;
+
+ if (time >= (pe_timeout * HZ)) {
+ mrioc->init_cmds.is_waiting = 0;
+ mrioc->init_cmds.callback = NULL;
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ ioc_err(mrioc, "%s :port enable request timed out\n", __func__);
+ mrioc->is_driver_loading = 0;
+ mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_PE_TIMEOUT, 1);
+ }
+
+ if (mrioc->scan_failed) {
+ ioc_err(mrioc,
+ "%s :port enable failed with (ioc_status=0x%08x)\n",
+ __func__, mrioc->scan_failed);
+ mrioc->is_driver_loading = 0;
+ mrioc->stop_drv_processing = 1;
+ return 1;
+ }
+
+ if (mrioc->scan_started)
+ return 0;
+ ioc_info(mrioc, "%s :port enable: SUCCESS\n", __func__);
+ mrioc->is_driver_loading = 0;
+
+ return 1;
+}
+
/**
* mpi3mr_slave_destroy - Slave destroy callback handler
* @sdev: SCSI device reference
@@ -125,10 +655,114 @@ static int mpi3mr_target_alloc(struct scsi_target *starget)
static int mpi3mr_qcmd(struct Scsi_Host *shost,
struct scsi_cmnd *scmd)
{
+ struct mpi3mr_ioc *mrioc = shost_priv(shost);
+ struct mpi3mr_stgt_priv_data *stgt_priv_data;
+ struct mpi3mr_sdev_priv_data *sdev_priv_data;
+ struct scmd_priv *scmd_priv_data = NULL;
+ struct _mpi3_scsi_io_request *scsiio_req = NULL;
+ struct op_req_qinfo *op_req_q = NULL;
int retval = 0;
+ u16 dev_handle;
+ u16 host_tag;
+ u32 scsiio_flags = 0;
+ struct request *rq = scmd->request;
+ int iprio_class;
+
+ sdev_priv_data = scmd->device->hostdata;
+ if (!sdev_priv_data || !sdev_priv_data->tgt_priv_data) {
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ goto out;
+ }
- scmd->result = DID_NO_CONNECT << 16;
- scmd->scsi_done(scmd);
+ if (mrioc->stop_drv_processing) {
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ goto out;
+ }
+
+ if (mrioc->reset_in_progress) {
+ retval = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+
+ stgt_priv_data = sdev_priv_data->tgt_priv_data;
+
+ dev_handle = stgt_priv_data->dev_handle;
+ if (dev_handle == MPI3MR_INVALID_DEV_HANDLE) {
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ goto out;
+ }
+ if (stgt_priv_data->dev_removed) {
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ goto out;
+ }
+
+ if (atomic_read(&stgt_priv_data->block_io)) {
+ if (mrioc->stop_drv_processing) {
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ goto out;
+ }
+ retval = SCSI_MLQUEUE_DEVICE_BUSY;
+ goto out;
+ }
+
+ host_tag = mpi3mr_host_tag_for_scmd(mrioc, scmd);
+ if (host_tag == MPI3MR_HOSTTAG_INVALID) {
+ scmd->result = DID_ERROR << 16;
+ scmd->scsi_done(scmd);
+ goto out;
+ }
+
+ if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+ scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_READ;
+ else if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE;
+ else
+ scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER;
+
+ scsiio_flags |= MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ;
+
+ if (sdev_priv_data->ncq_prio_enable) {
+ iprio_class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
+ if (iprio_class == IOPRIO_CLASS_RT)
+ scsiio_flags |= 1 << MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT;
+ }
+
+ if (scmd->cmd_len > 16)
+ scsiio_flags |= MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16;
+
+ scmd_priv_data = scsi_cmd_priv(scmd);
+ memset(scmd_priv_data->mpi3mr_scsiio_req, 0, MPI3MR_ADMIN_REQ_FRAME_SZ);
+ scsiio_req = (struct _mpi3_scsi_io_request *)scmd_priv_data->mpi3mr_scsiio_req;
+ scsiio_req->function = MPI3_FUNCTION_SCSI_IO;
+ scsiio_req->host_tag = cpu_to_le16(host_tag);
+
+ memcpy(scsiio_req->cdb.cdb32, scmd->cmnd, scmd->cmd_len);
+ scsiio_req->data_length = cpu_to_le32(scsi_bufflen(scmd));
+ scsiio_req->dev_handle = cpu_to_le16(dev_handle);
+ scsiio_req->flags = cpu_to_le32(scsiio_flags);
+ int_to_scsilun(sdev_priv_data->lun_id,
+ (struct scsi_lun *)scsiio_req->lun);
+
+ if (mpi3mr_build_sg_scmd(mrioc, scmd, scsiio_req)) {
+ mpi3mr_clear_scmd_priv(mrioc, scmd);
+ retval = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+ op_req_q = &mrioc->req_qinfo[scmd_priv_data->req_q_idx];
+
+ if (mpi3mr_op_request_post(mrioc, op_req_q,
+ scmd_priv_data->mpi3mr_scsiio_req)) {
+ mpi3mr_clear_scmd_priv(mrioc, scmd);
+ retval = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+
+out:
return retval;
}
@@ -142,6 +776,8 @@ static struct scsi_host_template mpi3mr_driver_template = {
.slave_configure = mpi3mr_slave_configure,
.target_destroy = mpi3mr_target_destroy,
.slave_destroy = mpi3mr_slave_destroy,
+ .scan_finished = mpi3mr_scan_finished,
+ .scan_start = mpi3mr_scan_start,
.map_queues = mpi3mr_map_queues,
.no_write_same = 1,
.can_queue = 1,
@@ -216,6 +852,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init(&mrioc->admin_req_lock);
spin_lock_init(&mrioc->reply_free_queue_lock);
spin_lock_init(&mrioc->sbq_lock);
+ spin_lock_init(&mrioc->chain_buf_lock);
mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
if (pdev->revision)
@@ -285,6 +922,7 @@ static void mpi3mr_remove(struct pci_dev *pdev)
while (mrioc->reset_in_progress || mrioc->is_driver_loading)
ssleep(1);
+ mrioc->stop_drv_processing = 1;
scsi_remove_host(shost);
mpi3mr_cleanup_ioc(mrioc);
@@ -317,6 +955,7 @@ static void mpi3mr_shutdown(struct pci_dev *pdev)
while (mrioc->reset_in_progress || mrioc->is_driver_loading)
ssleep(1);
+ mrioc->stop_drv_processing = 1;
mpi3mr_cleanup_ioc(mrioc);
}
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* Re: [PATCH v5 04/24] mpi3mr: add support of queue command processing
2021-05-13 8:35 ` [PATCH v5 04/24] mpi3mr: add support of queue command processing Kashyap Desai
@ 2021-05-14 11:41 ` Hannes Reinecke
2021-05-17 15:37 ` Kashyap Desai
0 siblings, 1 reply; 38+ messages in thread
From: Hannes Reinecke @ 2021-05-14 11:41 UTC (permalink / raw)
To: Kashyap Desai, linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash
On 5/13/21 10:35 AM, Kashyap Desai wrote:
> Send Port Enable Request to FW for Device Discovery.
> As part of port enable completion driver calls scan_start and
> scan_finished hooks.
> scsi layer reference like sdev, starget etc is added but actual
> device discovery will be supported once driver add complete event
> process handling (It is added in subsequent patches)
>
> This patch provides interface which is used to interact with FW
> via operational queue pairs.
>
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> Reviewed-by: Tomas Henzl <thenzl@redhat.com>
> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
>
> Cc: sathya.prakash@broadcom.com
> Cc: hare@suse.de
> ---
> drivers/scsi/mpi3mr/mpi3mr.h | 51 +++
> drivers/scsi/mpi3mr/mpi3mr_fw.c | 244 ++++++++++++
> drivers/scsi/mpi3mr/mpi3mr_os.c | 643 +++++++++++++++++++++++++++++++-
> 3 files changed, 936 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
> index 859b630371dd..8804dd027086 100644
> --- a/drivers/scsi/mpi3mr/mpi3mr.h
> +++ b/drivers/scsi/mpi3mr/mpi3mr.h
> @@ -96,6 +96,7 @@ extern struct list_head mrioc_list;
>
> /* command/controller interaction timeout definitions in seconds */
> #define MPI3MR_INTADMCMD_TIMEOUT 10
> +#define MPI3MR_PORTENABLE_TIMEOUT 300
> #define MPI3MR_RESETTM_TIMEOUT 30
> #define MPI3MR_DEFAULT_SHUTDOWN_TIME 120
>
> @@ -312,7 +313,43 @@ struct mpi3mr_intr_info {
> char name[MPI3MR_NAME_LENGTH];
> };
>
> +/**
> + * struct mpi3mr_stgt_priv_data - SCSI target private structure
> + *
> + * @starget: Scsi_target pointer
> + * @dev_handle: FW device handle
> + * @perst_id: FW assigned Persistent ID
> + * @num_luns: Number of Logical Units
> + * @block_io: I/O blocked to the device or not
> + * @dev_removed: Device removed in the Firmware
> + * @dev_removedelay: Device is waiting to be removed in FW
> + * @dev_type: Device type
> + * @tgt_dev: Internal target device pointer
> + */
> +struct mpi3mr_stgt_priv_data {
> + struct scsi_target *starget;
> + u16 dev_handle;
> + u16 perst_id;
> + u32 num_luns;
> + atomic_t block_io;
> + u8 dev_removed;
> + u8 dev_removedelay;
> + u8 dev_type;
> + struct mpi3mr_tgt_dev *tgt_dev;
> +};
>
> +/**
> + * struct mpi3mr_stgt_priv_data - SCSI device private structure
> + *
> + * @tgt_priv_data: Scsi_target private data pointer
> + * @lun_id: LUN ID of the device
> + * @ncq_prio_enable: NCQ priority enable for SATA device
> + */
> +struct mpi3mr_sdev_priv_data {
> + struct mpi3mr_stgt_priv_data *tgt_priv_data;
> + u32 lun_id;
> + u8 ncq_prio_enable;
> +};
>
> /**
> * struct mpi3mr_drv_cmd - Internal command tracker
> @@ -442,12 +479,16 @@ struct scmd_priv {
> * @sbq_lock: Sense buffer queue lock
> * @sbq_host_index: Sense buffer queuehost index
> * @is_driver_loading: Is driver still loading
> + * @scan_started: Async scan started
> + * @scan_failed: Asycn scan failed
> + * @stop_drv_processing: Stop all command processing
> * @max_host_ios: Maximum host I/O count
> * @chain_buf_count: Chain buffer count
> * @chain_buf_pool: Chain buffer pool
> * @chain_sgl_list: Chain SGL list
> * @chain_bitmap_sz: Chain buffer allocator bitmap size
> * @chain_bitmap: Chain buffer allocator bitmap
> + * @chain_buf_lock: Chain buffer list lock
> * @reset_in_progress: Reset in progress flag
> * @unrecoverable: Controller unrecoverable flag
> * @logging_level: Controller debug logging level
> @@ -532,6 +573,9 @@ struct mpi3mr_ioc {
> u32 sbq_host_index;
>
> u8 is_driver_loading;
> + u8 scan_started;
> + u16 scan_failed;
> + u8 stop_drv_processing;
>
> u16 max_host_ios;
>
> @@ -540,6 +584,7 @@ struct mpi3mr_ioc {
> struct chain_element *chain_sgl_list;
> u16 chain_bitmap_sz;
> void *chain_bitmap;
> + spinlock_t chain_buf_lock;
>
> u8 reset_in_progress;
> u8 unrecoverable;
> @@ -556,8 +601,11 @@ int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
> void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc);
> int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc);
> void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc);
> +int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async);
> int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req,
> u16 admin_req_sz, u8 ignore_reset);
> +int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
> + struct op_req_qinfo *opreqq, u8 *req);
> void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length,
> dma_addr_t dma_addr);
> void mpi3mr_build_zero_len_sge(void *paddr);
> @@ -568,6 +616,9 @@ void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc,
> void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
> u64 sense_buf_dma);
>
> +void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
> + struct _mpi3_default_reply_descriptor *reply_desc,
> + u64 *reply_dma, u16 qidx);
> void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc);
> void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc);
>
> diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
> index 39941febbf9d..7779e2b965e6 100644
> --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
> +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
> @@ -25,6 +25,22 @@ static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr)
> }
> #endif
>
> +static inline bool
> +mpi3mr_check_req_qfull(struct op_req_qinfo *op_req_q)
> +{
> + u16 pi, ci, max_entries;
> + bool is_qfull = false;
> +
> + pi = op_req_q->pi;
> + ci = READ_ONCE(op_req_q->ci);
> + max_entries = op_req_q->num_requests;
> +
> + if ((ci == (pi + 1)) || ((!ci) && (pi == (max_entries - 1))))
> + is_qfull = true;
> +
> + return is_qfull;
> +}
> +
> static void mpi3mr_sync_irqs(struct mpi3mr_ioc *mrioc)
> {
> u16 i, max_vectors;
> @@ -283,6 +299,83 @@ static int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
> return num_admin_replies;
> }
>
> +/**
> + * mpi3mr_get_reply_desc - get reply descriptor frame corresponding to
> + * queue's consumer index from operational reply descriptor queue.
> + * @op_reply_q: op_reply_qinfo object
> + * @reply_ci: operational reply descriptor's queue consumer index
> + *
> + * Returns reply descriptor frame address
> + */
> +static inline struct _mpi3_default_reply_descriptor *
> +mpi3mr_get_reply_desc(struct op_reply_qinfo *op_reply_q, u32 reply_ci)
> +{
> + void *segment_base_addr;
> + struct segments *segments = op_reply_q->q_segments;
> + struct _mpi3_default_reply_descriptor *reply_desc = NULL;
> +
> + segment_base_addr =
> + segments[reply_ci / op_reply_q->segment_qd].segment;
> + reply_desc = (struct _mpi3_default_reply_descriptor *)segment_base_addr +
> + (reply_ci % op_reply_q->segment_qd);
> + return reply_desc;
> +}
> +
> +static int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_intr_info *intr_info)
> +{
> + struct op_reply_qinfo *op_reply_q = intr_info->op_reply_q;
> + struct op_req_qinfo *op_req_q;
> + u32 exp_phase;
> + u32 reply_ci;
> + u32 num_op_reply = 0;
> + u64 reply_dma = 0;
> + struct _mpi3_default_reply_descriptor *reply_desc;
> + u16 req_q_idx = 0, reply_qidx;
> +
> + reply_qidx = op_reply_q->qid - 1;
> +
> + exp_phase = op_reply_q->ephase;
> + reply_ci = op_reply_q->ci;
> +
> + reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci);
> + if ((le16_to_cpu(reply_desc->reply_flags) &
> + MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) {
> + return 0;
> + }
> +
> + do {
> + req_q_idx = le16_to_cpu(reply_desc->request_queue_id) - 1;
> + op_req_q = &mrioc->req_qinfo[req_q_idx];
> +
> + WRITE_ONCE(op_req_q->ci, le16_to_cpu(reply_desc->request_queue_ci));
> + mpi3mr_process_op_reply_desc(mrioc, reply_desc, &reply_dma,
> + reply_qidx);
> + if (reply_dma)
> + mpi3mr_repost_reply_buf(mrioc, reply_dma);
> + num_op_reply++;
> +
> + if (++reply_ci == op_reply_q->num_replies) {
> + reply_ci = 0;
> + exp_phase ^= 1;
> + }
> +
> + reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci);
> +
> + if ((le16_to_cpu(reply_desc->reply_flags) &
> + MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase)
> + break;
> +
> + } while (1);
> +
Is this loop bounded by something?
The way it looks like we might end up having to process at lot of
replies, causing a bogus hangcheck trigger.
Have you check for that condition?
> + writel(reply_ci,
> + &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].consumer_index);
> + op_reply_q->ci = reply_ci;
> + op_reply_q->ephase = exp_phase;
> +
> + return num_op_reply;
> +}
> +
> static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata)
> {
> struct mpi3mr_intr_info *intr_info = privdata;
> @@ -1302,6 +1395,74 @@ static int mpi3mr_create_op_queues(struct mpi3mr_ioc *mrioc)
> return retval;
> }
>
> +/**
> + * mpi3mr_op_request_post - Post request to operational queue
> + * @mrioc: Adapter reference
> + * @op_req_q: Operational request queue info
> + * @req: MPI3 request
> + *
> + * Post the MPI3 request into operational request queue and
> + * inform the controller, if the queue is full return
> + * appropriate error.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
> + struct op_req_qinfo *op_req_q, u8 *req)
> +{
> + u16 pi = 0, max_entries, reply_qidx = 0, midx;
> + int retval = 0;
> + unsigned long flags;
> + u8 *req_entry;
> + void *segment_base_addr;
> + u16 req_sz = mrioc->facts.op_req_sz;
> + struct segments *segments = op_req_q->q_segments;
> +
> + reply_qidx = op_req_q->reply_qid - 1;
> +
> + if (mrioc->unrecoverable)
> + return -EFAULT;
> +
> + spin_lock_irqsave(&op_req_q->q_lock, flags);
> + pi = op_req_q->pi;
> + max_entries = op_req_q->num_requests;
> +
> + if (mpi3mr_check_req_qfull(op_req_q)) {
> + midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(
> + reply_qidx, mrioc->op_reply_q_offset);
> + mpi3mr_process_op_reply_q(mrioc, &mrioc->intr_info[midx]);
> +
> + if (mpi3mr_check_req_qfull(op_req_q)) {
> + retval = -EAGAIN;
> + goto out;
> + }
> + }
> +
> + if (mrioc->reset_in_progress) {
> + ioc_err(mrioc, "OpReqQ submit reset in progress\n");
> + retval = -EAGAIN;
> + goto out;
> + }
> +
Have you considered a different error code here?
reset in progress and queue full are two different scenarios; especially
the latter might warrant some further action like decreasing the queue
depth, which is getting hard if you have the same error ...
> + segment_base_addr = segments[pi / op_req_q->segment_qd].segment;
> + req_entry = (u8 *)segment_base_addr +
> + ((pi % op_req_q->segment_qd) * req_sz);
> +
> + memset(req_entry, 0, req_sz);
> + memcpy(req_entry, req, MPI3MR_ADMIN_REQ_FRAME_SZ);
> +
> + if (++pi == max_entries)
> + pi = 0;
> + op_req_q->pi = pi;
> +
> + writel(op_req_q->pi,
> + &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].producer_index);
> +
> +out:
> + spin_unlock_irqrestore(&op_req_q->q_lock, flags);
> + return retval;
> +}
> +
> /**
> * mpi3mr_setup_admin_qpair - Setup admin queue pair
> * @mrioc: Adapter instance reference
> @@ -1887,6 +2048,89 @@ static int mpi3mr_alloc_chain_bufs(struct mpi3mr_ioc *mrioc)
> return retval;
> }
>
> +/**
> + * mpi3mr_port_enable_complete - Mark port enable complete
> + * @mrioc: Adapter instance reference
> + * @drv_cmd: Internal command tracker
> + *
> + * Call back for asynchronous port enable request sets the
> + * driver command to indicate port enable request is complete.
> + *
> + * Return: Nothing
> + */
> +static void mpi3mr_port_enable_complete(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_drv_cmd *drv_cmd)
> +{
> + drv_cmd->state = MPI3MR_CMD_NOTUSED;
> + drv_cmd->callback = NULL;
> + mrioc->scan_failed = drv_cmd->ioc_status;
> + mrioc->scan_started = 0;
> +}
> +
> +/**
> + * mpi3mr_issue_port_enable - Issue Port Enable
> + * @mrioc: Adapter instance reference
> + * @async: Flag to wait for completion or not
> + *
> + * Issue Port Enable MPI request through admin queue and if the
> + * async flag is not set wait for the completion of the port
> + * enable or time out.
> + *
> + * Return: 0 on success, non-zero on failures.
> + */
> +int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async)
> +{
> + struct _mpi3_port_enable_request pe_req;
> + int retval = 0;
> + u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT;
> +
> + memset(&pe_req, 0, sizeof(pe_req));
> + mutex_lock(&mrioc->init_cmds.mutex);
> + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
> + retval = -1;
> + ioc_err(mrioc, "Issue PortEnable: Init command is in use\n");
> + mutex_unlock(&mrioc->init_cmds.mutex);
> + goto out;
> + }
> + mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
> + if (async) {
> + mrioc->init_cmds.is_waiting = 0;
> + mrioc->init_cmds.callback = mpi3mr_port_enable_complete;
> + } else {
> + mrioc->init_cmds.is_waiting = 1;
> + mrioc->init_cmds.callback = NULL;
> + init_completion(&mrioc->init_cmds.done);
> + }
> + pe_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
> + pe_req.function = MPI3_FUNCTION_PORT_ENABLE;
> +
> + retval = mpi3mr_admin_request_post(mrioc, &pe_req, sizeof(pe_req), 1);
> + if (retval) {
> + ioc_err(mrioc, "Issue PortEnable: Admin Post failed\n");
> + goto out_unlock;
> + }
> + if (!async) {
> + wait_for_completion_timeout(&mrioc->init_cmds.done,
> + (pe_timeout * HZ));
> + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
> + ioc_err(mrioc, "Issue PortEnable: command timed out\n");
> + retval = -1;
> + mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR;
> + mpi3mr_set_diagsave(mrioc);
> + mpi3mr_issue_reset(mrioc,
> + MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
> + MPI3MR_RESET_FROM_PE_TIMEOUT);
> + mrioc->unrecoverable = 1;
> + goto out_unlock;
> + }
> + mpi3mr_port_enable_complete(mrioc, &mrioc->init_cmds);
> + }
> +out_unlock:
> + mutex_unlock(&mrioc->init_cmds.mutex);
> +out:
> + return retval;
> +}
> +
> /**
> * mpi3mr_cleanup_resources - Free PCI resources
> * @mrioc: Adapter instance reference
> diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
> index bda5312e6f2f..7b3072e72c79 100644
> --- a/drivers/scsi/mpi3mr/mpi3mr_os.c
> +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
> @@ -26,6 +26,471 @@ module_param(logging_level, int, 0);
> MODULE_PARM_DESC(logging_level,
> " bits for enabling additional logging info (default=0)");
>
> +/* Forward declarations*/
> +/**
> + * mpi3mr_host_tag_for_scmd - Get host tag for a scmd
> + * @mrioc: Adapter instance reference
> + * @scmd: SCSI command reference
> + *
> + * Calculate the host tag based on block tag for a given scmd.
> + *
> + * Return: Valid host tag or MPI3MR_HOSTTAG_INVALID.
> + */
> +static u16 mpi3mr_host_tag_for_scmd(struct mpi3mr_ioc *mrioc,
> + struct scsi_cmnd *scmd)
> +{
> + struct scmd_priv *priv = NULL;
> + u32 unique_tag;
> + u16 host_tag, hw_queue;
> +
> + unique_tag = blk_mq_unique_tag(scmd->request);
> +
> + hw_queue = blk_mq_unique_tag_to_hwq(unique_tag);
> + if (hw_queue >= mrioc->num_op_reply_q)
> + return MPI3MR_HOSTTAG_INVALID;
> + host_tag = blk_mq_unique_tag_to_tag(unique_tag);
> +
> + if (WARN_ON(host_tag >= mrioc->max_host_ios))
> + return MPI3MR_HOSTTAG_INVALID;
> +
> + priv = scsi_cmd_priv(scmd);
> + /*host_tag 0 is invalid hence incrementing by 1*/
> + priv->host_tag = host_tag + 1;
> + priv->scmd = scmd;
> + priv->in_lld_scope = 1;
> + priv->req_q_idx = hw_queue;
> + priv->chain_idx = -1;
> + return priv->host_tag;
> +}
> +
> +/**
> + * mpi3mr_scmd_from_host_tag - Get SCSI command from host tag
> + * @mrioc: Adapter instance reference
> + * @host_tag: Host tag
> + * @qidx: Operational queue index
> + *
> + * Identify the block tag from the host tag and queue index and
> + * retrieve associated scsi command using scsi_host_find_tag().
> + *
> + * Return: SCSI command reference or NULL.
> + */
> +static struct scsi_cmnd *mpi3mr_scmd_from_host_tag(
> + struct mpi3mr_ioc *mrioc, u16 host_tag, u16 qidx)
> +{
> + struct scsi_cmnd *scmd = NULL;
> + struct scmd_priv *priv = NULL;
> + u32 unique_tag = host_tag - 1;
> +
> + if (WARN_ON(host_tag > mrioc->max_host_ios))
> + goto out;
> +
> + unique_tag |= (qidx << BLK_MQ_UNIQUE_TAG_BITS);
> +
> + scmd = scsi_host_find_tag(mrioc->shost, unique_tag);
> + if (scmd) {
> + priv = scsi_cmd_priv(scmd);
> + if (!priv->in_lld_scope)
> + scmd = NULL;
> + }
> +out:
> + return scmd;
> +}
> +
> +/**
> + * mpi3mr_clear_scmd_priv - Cleanup SCSI command private date
> + * @mrioc: Adapter instance reference
> + * @scmd: SCSI command reference
> + *
> + * Invalidate the SCSI command private data to mark the command
> + * is not in LLD scope anymore.
> + *
> + * Return: Nothing.
> + */
> +static void mpi3mr_clear_scmd_priv(struct mpi3mr_ioc *mrioc,
> + struct scsi_cmnd *scmd)
> +{
> + struct scmd_priv *priv = NULL;
> +
> + priv = scsi_cmd_priv(scmd);
> +
> + if (WARN_ON(priv->in_lld_scope == 0))
> + return;
> + priv->host_tag = MPI3MR_HOSTTAG_INVALID;
> + priv->req_q_idx = 0xFFFF;
> + priv->scmd = NULL;
> + priv->in_lld_scope = 0;
> + if (priv->chain_idx >= 0) {
> + clear_bit(priv->chain_idx, mrioc->chain_bitmap);
> + priv->chain_idx = -1;
> + }
> +}
> +
> +/**
> + * mpi3mr_process_op_reply_desc - reply descriptor handler
> + * @mrioc: Adapter instance reference
> + * @reply_desc: Operational reply descriptor
> + * @reply_dma: place holder for reply DMA address
> + * @qidx: Operational queue index
> + *
> + * Process the operational reply descriptor and identifies the
> + * descriptor type. Based on the descriptor map the MPI3 request
> + * status to a SCSI command status and calls scsi_done call
> + * back.
> + *
> + * Return: Nothing
> + */
> +void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
> + struct _mpi3_default_reply_descriptor *reply_desc, u64 *reply_dma, u16 qidx)
> +{
> + u16 reply_desc_type, host_tag = 0;
> + u16 ioc_status = MPI3_IOCSTATUS_SUCCESS;
> + u32 ioc_loginfo = 0;
> + struct _mpi3_status_reply_descriptor *status_desc = NULL;
> + struct _mpi3_address_reply_descriptor *addr_desc = NULL;
> + struct _mpi3_success_reply_descriptor *success_desc = NULL;
> + struct _mpi3_scsi_io_reply *scsi_reply = NULL;
> + struct scsi_cmnd *scmd = NULL;
> + struct scmd_priv *priv = NULL;
> + u8 *sense_buf = NULL;
> + u8 scsi_state = 0, scsi_status = 0, sense_state = 0;
> + u32 xfer_count = 0, sense_count = 0, resp_data = 0;
> + u16 dev_handle = 0xFFFF;
> + struct scsi_sense_hdr sshdr;
> +
> + *reply_dma = 0;
> + reply_desc_type = le16_to_cpu(reply_desc->reply_flags) &
> + MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK;
> + switch (reply_desc_type) {
> + case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS:
> + status_desc = (struct _mpi3_status_reply_descriptor *)reply_desc;
> + host_tag = le16_to_cpu(status_desc->host_tag);
> + ioc_status = le16_to_cpu(status_desc->ioc_status);
> + if (ioc_status &
> + MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL)
> + ioc_loginfo = le32_to_cpu(status_desc->ioc_log_info);
> + ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK;
> + break;
> + case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY:
> + addr_desc = (struct _mpi3_address_reply_descriptor *)reply_desc;
> + *reply_dma = le64_to_cpu(addr_desc->reply_frame_address);
> + scsi_reply = mpi3mr_get_reply_virt_addr(mrioc,
> + *reply_dma);
> + if (!scsi_reply) {
> + panic("%s: scsi_reply is NULL, this shouldn't happen\n",
> + mrioc->name);
> + goto out;
> + }
> + host_tag = le16_to_cpu(scsi_reply->host_tag);
> + ioc_status = le16_to_cpu(scsi_reply->ioc_status);
> + scsi_status = scsi_reply->scsi_status;
> + scsi_state = scsi_reply->scsi_state;
> + dev_handle = le16_to_cpu(scsi_reply->dev_handle);
> + sense_state = (scsi_state & MPI3_SCSI_STATE_SENSE_MASK);
> + xfer_count = le32_to_cpu(scsi_reply->transfer_count);
> + sense_count = le32_to_cpu(scsi_reply->sense_count);
> + resp_data = le32_to_cpu(scsi_reply->response_data);
> + sense_buf = mpi3mr_get_sensebuf_virt_addr(mrioc,
> + le64_to_cpu(scsi_reply->sense_data_buffer_address));
> + if (ioc_status &
> + MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL)
> + ioc_loginfo = le32_to_cpu(scsi_reply->ioc_log_info);
> + ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK;
> + if (sense_state == MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY)
> + panic("%s: Ran out of sense buffers\n", mrioc->name);
> + break;
> + case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS:
> + success_desc = (struct _mpi3_success_reply_descriptor *)reply_desc;
> + host_tag = le16_to_cpu(success_desc->host_tag);
> + break;
> + default:
> + break;
> + }
> + scmd = mpi3mr_scmd_from_host_tag(mrioc, host_tag, qidx);
> + if (!scmd) {
> + panic("%s: Cannot Identify scmd for host_tag 0x%x\n",
> + mrioc->name, host_tag);
> + goto out;
> + }
> + priv = scsi_cmd_priv(scmd);
> + if (success_desc) {
> + scmd->result = DID_OK << 16;
> + goto out_success;
> + }
> + if (ioc_status == MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN &&
> + xfer_count == 0 && (scsi_status == MPI3_SCSI_STATUS_BUSY ||
> + scsi_status == MPI3_SCSI_STATUS_RESERVATION_CONFLICT ||
> + scsi_status == MPI3_SCSI_STATUS_TASK_SET_FULL))
> + ioc_status = MPI3_IOCSTATUS_SUCCESS;
> +
> + if ((sense_state == MPI3_SCSI_STATE_SENSE_VALID) && sense_count &&
> + sense_buf) {
> + u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, sense_count);
> +
> + memcpy(scmd->sense_buffer, sense_buf, sz);
> + }
> +
> + switch (ioc_status) {
> + case MPI3_IOCSTATUS_BUSY:
> + case MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES:
> + scmd->result = SAM_STAT_BUSY;
> + break;
> + case MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
> + scmd->result = DID_NO_CONNECT << 16;
> + break;
> + case MPI3_IOCSTATUS_SCSI_IOC_TERMINATED:
> + scmd->result = DID_SOFT_ERROR << 16;
> + break;
> + case MPI3_IOCSTATUS_SCSI_TASK_TERMINATED:
> + case MPI3_IOCSTATUS_SCSI_EXT_TERMINATED:
> + scmd->result = DID_RESET << 16;
> + break;
> + case MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
> + if ((xfer_count == 0) || (scmd->underflow > xfer_count))
> + scmd->result = DID_SOFT_ERROR << 16;
> + else
> + scmd->result = (DID_OK << 16) | scsi_status;
> + break;
> + case MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN:
> + scmd->result = (DID_OK << 16) | scsi_status;
> + if (sense_state == MPI3_SCSI_STATE_SENSE_VALID)
> + break;
> + if (xfer_count < scmd->underflow) {
> + if (scsi_status == SAM_STAT_BUSY)
> + scmd->result = SAM_STAT_BUSY;
> + else
> + scmd->result = DID_SOFT_ERROR << 16;
> + } else if ((scsi_state & (MPI3_SCSI_STATE_NO_SCSI_STATUS)) ||
> + (sense_state != MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE))
> + scmd->result = DID_SOFT_ERROR << 16;
> + else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
> + scmd->result = DID_RESET << 16;
> + else if (!xfer_count && scmd->cmnd[0] == REPORT_LUNS) {
> + scsi_status = SAM_STAT_CHECK_CONDITION;
> + scmd->result = (DRIVER_SENSE << 24) |
> + SAM_STAT_CHECK_CONDITION;
> + scmd->sense_buffer[0] = 0x70;
> + scmd->sense_buffer[2] = ILLEGAL_REQUEST;
> + scmd->sense_buffer[12] = 0x20;
> + scmd->sense_buffer[13] = 0;
> + }
Huh? A separate error handling just for REPORT LUNS?
Did you mess up your firmware?
And if you know REPORT LUNS is not supported, by bother sending it to
the firmware and not completing it straightaway in queuecommand()?
> + break;
> + case MPI3_IOCSTATUS_SCSI_DATA_OVERRUN:
> + scsi_set_resid(scmd, 0);
> + fallthrough;
> + case MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR:
> + case MPI3_IOCSTATUS_SUCCESS:
> + scmd->result = (DID_OK << 16) | scsi_status;
> + if ((scsi_state & (MPI3_SCSI_STATE_NO_SCSI_STATUS)) ||
> + (sense_state == MPI3_SCSI_STATE_SENSE_FAILED) ||
> + (sense_state == MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY))
> + scmd->result = DID_SOFT_ERROR << 16;
> + else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
> + scmd->result = DID_RESET << 16;
> + break;
> + case MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR:
> + case MPI3_IOCSTATUS_INVALID_FUNCTION:
> + case MPI3_IOCSTATUS_INVALID_SGL:
> + case MPI3_IOCSTATUS_INTERNAL_ERROR:
> + case MPI3_IOCSTATUS_INVALID_FIELD:
> + case MPI3_IOCSTATUS_INVALID_STATE:
> + case MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR:
> + case MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
> + case MPI3_IOCSTATUS_INSUFFICIENT_POWER:
> + default:
> + scmd->result = DID_SOFT_ERROR << 16;
> + break;
> + }
> +
> + if (scmd->result != (DID_OK << 16) && (scmd->cmnd[0] != ATA_12) &&
> + (scmd->cmnd[0] != ATA_16)) {
> + ioc_info(mrioc, "%s :scmd->result 0x%x\n", __func__,
> + scmd->result);
> + scsi_print_command(scmd);
> + ioc_info(mrioc,
> + "%s :Command issued to handle 0x%02x returned with error 0x%04x loginfo 0x%08x, qid %d\n",
> + __func__, dev_handle, ioc_status, ioc_loginfo,
> + priv->req_q_idx + 1);
> + ioc_info(mrioc,
> + " host_tag %d scsi_state 0x%02x scsi_status 0x%02x, xfer_cnt %d resp_data 0x%x\n",
> + host_tag, scsi_state, scsi_status, xfer_count, resp_data);
> + if (sense_buf) {
> + scsi_normalize_sense(sense_buf, sense_count, &sshdr);
> + ioc_info(mrioc,
> + "%s :sense_count 0x%x, sense_key 0x%x ASC 0x%x, ASCQ 0x%x\n",
> + __func__, sense_count, sshdr.sense_key,
> + sshdr.asc, sshdr.ascq);
> + }
> + }
> +out_success:
> + mpi3mr_clear_scmd_priv(mrioc, scmd);
> + scsi_dma_unmap(scmd);
> + scmd->scsi_done(scmd);
> +out:
> + if (sense_buf)
> + mpi3mr_repost_sense_buf(mrioc,
> + le64_to_cpu(scsi_reply->sense_data_buffer_address));
> +}
> +
> +/**
> + * mpi3mr_get_chain_idx - get free chain buffer index
> + * @mrioc: Adapter instance reference
> + *
> + * Try to get a free chain buffer index from the free pool.
> + *
> + * Return: -1 on failure or the free chain buffer index
> + */
> +static int mpi3mr_get_chain_idx(struct mpi3mr_ioc *mrioc)
> +{
> + u8 retry_count = 5;
> + int cmd_idx = -1;
> +
> + do {
> + spin_lock(&mrioc->chain_buf_lock);
> + cmd_idx = find_first_zero_bit(mrioc->chain_bitmap,
> + mrioc->chain_buf_count);
> + if (cmd_idx < mrioc->chain_buf_count) {
> + set_bit(cmd_idx, mrioc->chain_bitmap);
> + spin_unlock(&mrioc->chain_buf_lock);
> + break;
> + }
> + spin_unlock(&mrioc->chain_buf_lock);
> + cmd_idx = -1;
> + } while (retry_count--);
> + return cmd_idx;
> +}
> +
> +/**
> + * mpi3mr_prepare_sg_scmd - build scatter gather list
> + * @mrioc: Adapter instance reference
> + * @scmd: SCSI command reference
> + * @scsiio_req: MPI3 SCSI IO request
> + *
> + * This function maps SCSI command's data and protection SGEs to
> + * MPI request SGEs. If required additional 4K chain buffer is
> + * used to send the SGEs.
> + *
> + * Return: 0 on success, -ENOMEM on dma_map_sg failure
> + */
> +static int mpi3mr_prepare_sg_scmd(struct mpi3mr_ioc *mrioc,
> + struct scsi_cmnd *scmd, struct _mpi3_scsi_io_request *scsiio_req)
> +{
> + dma_addr_t chain_dma;
> + struct scatterlist *sg_scmd;
> + void *sg_local, *chain;
> + u32 chain_length;
> + int sges_left, chain_idx;
> + u32 sges_in_segment;
> + u8 simple_sgl_flags;
> + u8 simple_sgl_flags_last;
> + u8 last_chain_sgl_flags;
> + struct chain_element *chain_req;
> + struct scmd_priv *priv = NULL;
> +
> + priv = scsi_cmd_priv(scmd);
> +
> + simple_sgl_flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE |
> + MPI3_SGE_FLAGS_DLAS_SYSTEM;
> + simple_sgl_flags_last = simple_sgl_flags |
> + MPI3_SGE_FLAGS_END_OF_LIST;
> + last_chain_sgl_flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN |
> + MPI3_SGE_FLAGS_DLAS_SYSTEM;
> +
> + sg_local = &scsiio_req->sgl;
> +
> + if (!scsiio_req->data_length) {
> + mpi3mr_build_zero_len_sge(sg_local);
> + return 0;
> + }
> +
> + sg_scmd = scsi_sglist(scmd);
> + sges_left = scsi_dma_map(scmd);
> +
> + if (sges_left < 0) {
> + sdev_printk(KERN_ERR, scmd->device,
> + "scsi_dma_map failed: request for %d bytes!\n",
> + scsi_bufflen(scmd));
> + return -ENOMEM;
> + }
> + if (sges_left > MPI3MR_SG_DEPTH) {
> + sdev_printk(KERN_ERR, scmd->device,
> + "scsi_dma_map returned unsupported sge count %d!\n",
> + sges_left);
> + return -ENOMEM;
> + }
> +
> + sges_in_segment = (mrioc->facts.op_req_sz -
> + offsetof(struct _mpi3_scsi_io_request, sgl)) / sizeof(struct _mpi3_sge_common);
> +
> + if (sges_left <= sges_in_segment)
> + goto fill_in_last_segment;
> +
> + /* fill in main message segment when there is a chain following */
> + while (sges_in_segment > 1) {
> + mpi3mr_add_sg_single(sg_local, simple_sgl_flags,
> + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
> + sg_scmd = sg_next(sg_scmd);
> + sg_local += sizeof(struct _mpi3_sge_common);
> + sges_left--;
> + sges_in_segment--;
> + }
> +
> + chain_idx = mpi3mr_get_chain_idx(mrioc);
> + if (chain_idx < 0)
> + return -1;
> + chain_req = &mrioc->chain_sgl_list[chain_idx];
> + priv->chain_idx = chain_idx;
> +
> + chain = chain_req->addr;
> + chain_dma = chain_req->dma_addr;
> + sges_in_segment = sges_left;
> + chain_length = sges_in_segment * sizeof(struct _mpi3_sge_common);
> +
> + mpi3mr_add_sg_single(sg_local, last_chain_sgl_flags,
> + chain_length, chain_dma);
> +
> + sg_local = chain;
> +
> +fill_in_last_segment:
> + while (sges_left > 0) {
> + if (sges_left == 1)
> + mpi3mr_add_sg_single(sg_local,
> + simple_sgl_flags_last, sg_dma_len(sg_scmd),
> + sg_dma_address(sg_scmd));
> + else
> + mpi3mr_add_sg_single(sg_local, simple_sgl_flags,
> + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
> + sg_scmd = sg_next(sg_scmd);
> + sg_local += sizeof(struct _mpi3_sge_common);
> + sges_left--;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * mpi3mr_build_sg_scmd - build scatter gather list for SCSI IO
> + * @mrioc: Adapter instance reference
> + * @scmd: SCSI command reference
> + * @scsiio_req: MPI3 SCSI IO request
> + *
> + * This function calls mpi3mr_prepare_sg_scmd for constructing
> + * both data SGEs and protection information SGEs in the MPI
> + * format from the SCSI Command as appropriate .
> + *
> + * Return: return value of mpi3mr_prepare_sg_scmd.
> + */
> +static int mpi3mr_build_sg_scmd(struct mpi3mr_ioc *mrioc,
> + struct scsi_cmnd *scmd, struct _mpi3_scsi_io_request *scsiio_req)
> +{
> + int ret;
> +
> + ret = mpi3mr_prepare_sg_scmd(mrioc, scmd, scsiio_req);
> + if (ret)
> + return ret;
> +
> + return ret;
> +}
> +
> /**
> * mpi3mr_map_queues - Map queues callback handler
> * @shost: SCSI host reference
> @@ -43,6 +508,71 @@ static int mpi3mr_map_queues(struct Scsi_Host *shost)
> mrioc->pdev, mrioc->op_reply_q_offset);
> }
>
> +/**
> + * mpi3mr_scan_start - Scan start callback handler
> + * @shost: SCSI host reference
> + *
> + * Issue port enable request asynchronously.
> + *
> + * Return: Nothing
> + */
> +static void mpi3mr_scan_start(struct Scsi_Host *shost)
> +{
> + struct mpi3mr_ioc *mrioc = shost_priv(shost);
> +
> + mrioc->scan_started = 1;
> + ioc_info(mrioc, "%s :Issuing Port Enable\n", __func__);
> + if (mpi3mr_issue_port_enable(mrioc, 1)) {
> + ioc_err(mrioc, "%s :Issuing port enable failed\n", __func__);
> + mrioc->scan_started = 0;
> + mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR;
> + }
> +}
> +
> +/**
> + * mpi3mr_scan_finished - Scan finished callback handler
> + * @shost: SCSI host reference
> + * @time: Jiffies from the scan start
> + *
> + * Checks whether the port enable is completed or timedout or
> + * failed and set the scan status accordingly after taking any
> + * recovery if required.
> + *
> + * Return: 1 on scan finished or timed out, 0 for in progress
> + */
> +static int mpi3mr_scan_finished(struct Scsi_Host *shost,
> + unsigned long time)
> +{
> + struct mpi3mr_ioc *mrioc = shost_priv(shost);
> + u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT;
> +
> + if (time >= (pe_timeout * HZ)) {
> + mrioc->init_cmds.is_waiting = 0;
> + mrioc->init_cmds.callback = NULL;
> + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
> + ioc_err(mrioc, "%s :port enable request timed out\n", __func__);
> + mrioc->is_driver_loading = 0;
> + mpi3mr_soft_reset_handler(mrioc,
> + MPI3MR_RESET_FROM_PE_TIMEOUT, 1);
> + }
> +
> + if (mrioc->scan_failed) {
> + ioc_err(mrioc,
> + "%s :port enable failed with (ioc_status=0x%08x)\n",
> + __func__, mrioc->scan_failed);
> + mrioc->is_driver_loading = 0;
> + mrioc->stop_drv_processing = 1;
> + return 1;
> + }
> +
> + if (mrioc->scan_started)
> + return 0;
> + ioc_info(mrioc, "%s :port enable: SUCCESS\n", __func__);
> + mrioc->is_driver_loading = 0;
> +
> + return 1;
> +}
> +
> /**
> * mpi3mr_slave_destroy - Slave destroy callback handler
> * @sdev: SCSI device reference
> @@ -125,10 +655,114 @@ static int mpi3mr_target_alloc(struct scsi_target *starget)
> static int mpi3mr_qcmd(struct Scsi_Host *shost,
> struct scsi_cmnd *scmd)
> {
> + struct mpi3mr_ioc *mrioc = shost_priv(shost);
> + struct mpi3mr_stgt_priv_data *stgt_priv_data;
> + struct mpi3mr_sdev_priv_data *sdev_priv_data;
> + struct scmd_priv *scmd_priv_data = NULL;
> + struct _mpi3_scsi_io_request *scsiio_req = NULL;
> + struct op_req_qinfo *op_req_q = NULL;
> int retval = 0;
> + u16 dev_handle;
> + u16 host_tag;
> + u32 scsiio_flags = 0;
> + struct request *rq = scmd->request;
> + int iprio_class;
> +
> + sdev_priv_data = scmd->device->hostdata;
> + if (!sdev_priv_data || !sdev_priv_data->tgt_priv_data) {
> + scmd->result = DID_NO_CONNECT << 16;
> + scmd->scsi_done(scmd);
> + goto out;
> + }
>
> - scmd->result = DID_NO_CONNECT << 16;
> - scmd->scsi_done(scmd);
> + if (mrioc->stop_drv_processing) {
> + scmd->result = DID_NO_CONNECT << 16;
> + scmd->scsi_done(scmd);
> + goto out;
> + }
> +
> + if (mrioc->reset_in_progress) {
> + retval = SCSI_MLQUEUE_HOST_BUSY;
> + goto out;
> + }
> +
> + stgt_priv_data = sdev_priv_data->tgt_priv_data;
> +
> + dev_handle = stgt_priv_data->dev_handle;
> + if (dev_handle == MPI3MR_INVALID_DEV_HANDLE) {
> + scmd->result = DID_NO_CONNECT << 16;
> + scmd->scsi_done(scmd);
> + goto out;
> + }
> + if (stgt_priv_data->dev_removed) {
> + scmd->result = DID_NO_CONNECT << 16;
> + scmd->scsi_done(scmd);
> + goto out;
> + }
> +
> + if (atomic_read(&stgt_priv_data->block_io)) {
> + if (mrioc->stop_drv_processing) {
> + scmd->result = DID_NO_CONNECT << 16;
> + scmd->scsi_done(scmd);
> + goto out;
> + }
> + retval = SCSI_MLQUEUE_DEVICE_BUSY;
> + goto out;
> + }
> +
> + host_tag = mpi3mr_host_tag_for_scmd(mrioc, scmd);
> + if (host_tag == MPI3MR_HOSTTAG_INVALID) {
> + scmd->result = DID_ERROR << 16;
> + scmd->scsi_done(scmd);
> + goto out;
> + }
> +
> + if (scmd->sc_data_direction == DMA_FROM_DEVICE)
> + scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_READ;
> + else if (scmd->sc_data_direction == DMA_TO_DEVICE)
> + scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE;
> + else
> + scsiio_flags = MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER;
> +
> + scsiio_flags |= MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ;
> +
> + if (sdev_priv_data->ncq_prio_enable) {
> + iprio_class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
> + if (iprio_class == IOPRIO_CLASS_RT)
> + scsiio_flags |= 1 << MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT;
> + }
> +
> + if (scmd->cmd_len > 16)
> + scsiio_flags |= MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16;
> +
> + scmd_priv_data = scsi_cmd_priv(scmd);
> + memset(scmd_priv_data->mpi3mr_scsiio_req, 0, MPI3MR_ADMIN_REQ_FRAME_SZ);
> + scsiio_req = (struct _mpi3_scsi_io_request *)scmd_priv_data->mpi3mr_scsiio_req;
> + scsiio_req->function = MPI3_FUNCTION_SCSI_IO;
> + scsiio_req->host_tag = cpu_to_le16(host_tag);
> +
> + memcpy(scsiio_req->cdb.cdb32, scmd->cmnd, scmd->cmd_len);
> + scsiio_req->data_length = cpu_to_le32(scsi_bufflen(scmd));
> + scsiio_req->dev_handle = cpu_to_le16(dev_handle);
> + scsiio_req->flags = cpu_to_le32(scsiio_flags);
> + int_to_scsilun(sdev_priv_data->lun_id,
> + (struct scsi_lun *)scsiio_req->lun);
> +
> + if (mpi3mr_build_sg_scmd(mrioc, scmd, scsiio_req)) {
> + mpi3mr_clear_scmd_priv(mrioc, scmd);
> + retval = SCSI_MLQUEUE_HOST_BUSY;
> + goto out;
> + }
> + op_req_q = &mrioc->req_qinfo[scmd_priv_data->req_q_idx];
> +
> + if (mpi3mr_op_request_post(mrioc, op_req_q,
> + scmd_priv_data->mpi3mr_scsiio_req)) {
> + mpi3mr_clear_scmd_priv(mrioc, scmd);
> + retval = SCSI_MLQUEUE_HOST_BUSY;
> + goto out;
> + }
> +
> +out:
> return retval;
> }
>
> @@ -142,6 +776,8 @@ static struct scsi_host_template mpi3mr_driver_template = {
> .slave_configure = mpi3mr_slave_configure,
> .target_destroy = mpi3mr_target_destroy,
> .slave_destroy = mpi3mr_slave_destroy,
> + .scan_finished = mpi3mr_scan_finished,
> + .scan_start = mpi3mr_scan_start,
> .map_queues = mpi3mr_map_queues,
> .no_write_same = 1,
> .can_queue = 1,
> @@ -216,6 +852,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> spin_lock_init(&mrioc->admin_req_lock);
> spin_lock_init(&mrioc->reply_free_queue_lock);
> spin_lock_init(&mrioc->sbq_lock);
> + spin_lock_init(&mrioc->chain_buf_lock);
>
> mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
> if (pdev->revision)
> @@ -285,6 +922,7 @@ static void mpi3mr_remove(struct pci_dev *pdev)
> while (mrioc->reset_in_progress || mrioc->is_driver_loading)
> ssleep(1);
>
> + mrioc->stop_drv_processing = 1;
> scsi_remove_host(shost);
>
> mpi3mr_cleanup_ioc(mrioc);
> @@ -317,6 +955,7 @@ static void mpi3mr_shutdown(struct pci_dev *pdev)
> while (mrioc->reset_in_progress || mrioc->is_driver_loading)
> ssleep(1);
>
> + mrioc->stop_drv_processing = 1;
> mpi3mr_cleanup_ioc(mrioc);
> }
>
>
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, 90409 Nürnberg
GF: F. Imendörffer, HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 38+ messages in thread* RE: [PATCH v5 04/24] mpi3mr: add support of queue command processing
2021-05-14 11:41 ` Hannes Reinecke
@ 2021-05-17 15:37 ` Kashyap Desai
0 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-17 15:37 UTC (permalink / raw)
To: Hannes Reinecke, linux-scsi
Cc: jejb, martin.petersen, Steve Hagan, Peter Rivera,
mpi3mr-drvr-developers, Sathya Prakash Veerichetty
[-- Attachment #1: Type: text/plain, Size: 6185 bytes --]
> > + if (reply_dma)
> > + mpi3mr_repost_reply_buf(mrioc, reply_dma);
> > + num_op_reply++;
> > +
> > + if (++reply_ci == op_reply_q->num_replies) {
> > + reply_ci = 0;
> > + exp_phase ^= 1;
> > + }
> > +
> > + reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci);
> > +
> > + if ((le16_to_cpu(reply_desc->reply_flags) &
> > + MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) !=
> exp_phase)
> > + break;
> > +
> > + } while (1);
> > +
>
> Is this loop bounded by something?
> The way it looks like we might end up having to process at lot of replies,
> causing a bogus hangcheck trigger.
> Have you check for that condition?
Hi Hannes -
You are correct. There can be a bogus CPU lockup issue here. We could have
use irq_poll interface as we used in mpt3sas, megaraid_sas driver.
Since we have used hybrid threaded ISR in mpi3mr driver, we have covered
this scenario using threaded ISR. See patch #0017. We have below check to
handle CPU lockup -
if (num_op_reply > mrioc->max_host_ios) {
intr_info->op_reply_q->enable_irq_poll = true;
break;
}
>
> > + writel(reply_ci,
> > + &mrioc->sysif_regs-
> >oper_queue_indexes[reply_qidx].consumer_index);
> > + op_reply_q->ci = reply_ci;
> > + op_reply_q->ephase = exp_phase;
> > +
> > + return num_op_reply;
> > +}
> > +
> > static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata) {
> > struct mpi3mr_intr_info *intr_info = privdata; @@ -1302,6 +1395,74
> > @@ static int mpi3mr_create_op_queues(struct mpi3mr_ioc *mrioc)
> > return retval;
> > }
> >
> > +/**
> > + * mpi3mr_op_request_post - Post request to operational queue
> > + * @mrioc: Adapter reference
> > + * @op_req_q: Operational request queue info
> > + * @req: MPI3 request
> > + *
> > + * Post the MPI3 request into operational request queue and
> > + * inform the controller, if the queue is full return
> > + * appropriate error.
> > + *
> > + * Return: 0 on success, non-zero on failure.
> > + */
> > +int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
> > + struct op_req_qinfo *op_req_q, u8 *req) {
> > + u16 pi = 0, max_entries, reply_qidx = 0, midx;
> > + int retval = 0;
> > + unsigned long flags;
> > + u8 *req_entry;
> > + void *segment_base_addr;
> > + u16 req_sz = mrioc->facts.op_req_sz;
> > + struct segments *segments = op_req_q->q_segments;
> > +
> > + reply_qidx = op_req_q->reply_qid - 1;
> > +
> > + if (mrioc->unrecoverable)
> > + return -EFAULT;
> > +
> > + spin_lock_irqsave(&op_req_q->q_lock, flags);
> > + pi = op_req_q->pi;
> > + max_entries = op_req_q->num_requests;
> > +
> > + if (mpi3mr_check_req_qfull(op_req_q)) {
> > + midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(
> > + reply_qidx, mrioc->op_reply_q_offset);
> > + mpi3mr_process_op_reply_q(mrioc, &mrioc-
> >intr_info[midx]);
> > +
> > + if (mpi3mr_check_req_qfull(op_req_q)) {
> > + retval = -EAGAIN;
> > + goto out;
> > + }
> > + }
> > +
> > + if (mrioc->reset_in_progress) {
> > + ioc_err(mrioc, "OpReqQ submit reset in progress\n");
> > + retval = -EAGAIN;
> > + goto out;
> > + }
> > +
>
> Have you considered a different error code here?
> reset in progress and queue full are two different scenarios; especially
> the
> latter might warrant some further action like decreasing the queue depth,
> which is getting hard if you have the same error ...
There is really no difference if we use different error code, because
caller of mpi3mr_op_request_post checks zero or non-zero.
I got your point that we should have some better error code (if possible) in
case of controller is in reset.
I am thinking of using scsi_block_requests/scsi_unblock_requests pair in
controller reset path. We want stable first out of mpi3mr and also such
changes require additional testing, I will accommodate changes in this area
in next series.
Is it OK with you ?
> > + switch (ioc_status) {
> > + case MPI3_IOCSTATUS_BUSY:
> > + case MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES:
> > + scmd->result = SAM_STAT_BUSY;
> > + break;
> > + case MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
> > + scmd->result = DID_NO_CONNECT << 16;
> > + break;
> > + case MPI3_IOCSTATUS_SCSI_IOC_TERMINATED:
> > + scmd->result = DID_SOFT_ERROR << 16;
> > + break;
> > + case MPI3_IOCSTATUS_SCSI_TASK_TERMINATED:
> > + case MPI3_IOCSTATUS_SCSI_EXT_TERMINATED:
> > + scmd->result = DID_RESET << 16;
> > + break;
> > + case MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
> > + if ((xfer_count == 0) || (scmd->underflow > xfer_count))
> > + scmd->result = DID_SOFT_ERROR << 16;
> > + else
> > + scmd->result = (DID_OK << 16) | scsi_status;
> > + break;
> > + case MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN:
> > + scmd->result = (DID_OK << 16) | scsi_status;
> > + if (sense_state == MPI3_SCSI_STATE_SENSE_VALID)
> > + break;
> > + if (xfer_count < scmd->underflow) {
> > + if (scsi_status == SAM_STAT_BUSY)
> > + scmd->result = SAM_STAT_BUSY;
> > + else
> > + scmd->result = DID_SOFT_ERROR << 16;
> > + } else if ((scsi_state & (MPI3_SCSI_STATE_NO_SCSI_STATUS))
> ||
> > + (sense_state !=
> MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE))
> > + scmd->result = DID_SOFT_ERROR << 16;
> > + else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
> > + scmd->result = DID_RESET << 16;
> > + else if (!xfer_count && scmd->cmnd[0] == REPORT_LUNS) {
> > + scsi_status = SAM_STAT_CHECK_CONDITION;
> > + scmd->result = (DRIVER_SENSE << 24) |
> > + SAM_STAT_CHECK_CONDITION;
> > + scmd->sense_buffer[0] = 0x70;
> > + scmd->sense_buffer[2] = ILLEGAL_REQUEST;
> > + scmd->sense_buffer[12] = 0x20;
> > + scmd->sense_buffer[13] = 0;
> > + }
>
> Huh? A separate error handling just for REPORT LUNS?
> Did you mess up your firmware?
> And if you know REPORT LUNS is not supported, by bother sending it to the
> firmware and not completing it straightaway in queuecommand()?
This special case handling ported from past solution we used in mpt3sas. I
am not sure but it was due to mix of FW and Kernel behavior.
Some older kernel had lots of prints if we do not have above special
handling in driver. We will remove above check from mpi3mr driver and based
on any actual issue, we can add fix in future.
I will handle it in V6 submission.
Kashyap
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 05/24] mpi3mr: add support of internal watchdog thread
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (3 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 04/24] mpi3mr: add support of queue command processing Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 06/24] mpi3mr: add support of event handling part-1 Kashyap Desai
` (18 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 7694 bytes --]
Watchdog thread is driver's internal thread which does few things like
detecting FW fault and reset the controller, Timestamp sync etc.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 11 +++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 125 ++++++++++++++++++++++++++++++++
drivers/scsi/mpi3mr/mpi3mr_os.c | 5 +-
3 files changed, 140 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 8804dd027086..0ff2b3b1947b 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -478,6 +478,10 @@ struct scmd_priv {
* @sense_buf_q_dma: Sense buffer queue DMA address
* @sbq_lock: Sense buffer queue lock
* @sbq_host_index: Sense buffer queuehost index
+ * @watchdog_work_q_name: Fault watchdog worker thread name
+ * @watchdog_work_q: Fault watchdog worker thread
+ * @watchdog_work: Fault watchdog work
+ * @watchdog_lock: Fault watchdog lock
* @is_driver_loading: Is driver still loading
* @scan_started: Async scan started
* @scan_failed: Asycn scan failed
@@ -491,6 +495,7 @@ struct scmd_priv {
* @chain_buf_lock: Chain buffer list lock
* @reset_in_progress: Reset in progress flag
* @unrecoverable: Controller unrecoverable flag
+ * @diagsave_timeout: Diagnostic information save timeout
* @logging_level: Controller debug logging level
* @current_event: Firmware event currently in process
* @driver_info: Driver, Kernel, OS information to firmware
@@ -572,6 +577,11 @@ struct mpi3mr_ioc {
spinlock_t sbq_lock;
u32 sbq_host_index;
+ char watchdog_work_q_name[20];
+ struct workqueue_struct *watchdog_work_q;
+ struct delayed_work watchdog_work;
+ spinlock_t watchdog_lock;
+
u8 is_driver_loading;
u8 scan_started;
u16 scan_failed;
@@ -589,6 +599,7 @@ struct mpi3mr_ioc {
u8 reset_in_progress;
u8 unrecoverable;
+ u16 diagsave_timeout;
int logging_level;
struct mpi3mr_fwevt *current_event;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 7779e2b965e6..9a750f630d5e 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1463,6 +1463,129 @@ int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
return retval;
}
+/**
+ * mpi3mr_watchdog_work - watchdog thread to monitor faults
+ * @work: work struct
+ *
+ * Watch dog work periodically executed (1 second interval) to
+ * monitor firmware fault and to issue periodic timer sync to
+ * the firmware.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_watchdog_work(struct work_struct *work)
+{
+ struct mpi3mr_ioc *mrioc =
+ container_of(work, struct mpi3mr_ioc, watchdog_work.work);
+ unsigned long flags;
+ enum mpi3mr_iocstate ioc_state;
+ u32 fault, host_diagnostic;
+
+ /*Check for fault state every one second and issue Soft reset*/
+ ioc_state = mpi3mr_get_iocstate(mrioc);
+ if (ioc_state == MRIOC_STATE_FAULT) {
+ fault = readl(&mrioc->sysif_regs->fault) &
+ MPI3_SYSIF_FAULT_CODE_MASK;
+ host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic);
+ if (host_diagnostic & MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS) {
+ if (!mrioc->diagsave_timeout) {
+ mpi3mr_print_fault_info(mrioc);
+ ioc_warn(mrioc, "Diag save in progress\n");
+ }
+ if ((mrioc->diagsave_timeout++) <=
+ MPI3_SYSIF_DIAG_SAVE_TIMEOUT)
+ goto schedule_work;
+ } else
+ mpi3mr_print_fault_info(mrioc);
+ mrioc->diagsave_timeout = 0;
+
+ if (fault == MPI3_SYSIF_FAULT_CODE_FACTORY_RESET) {
+ ioc_info(mrioc,
+ "Factory Reset fault occurred marking controller as unrecoverable"
+ );
+ mrioc->unrecoverable = 1;
+ goto out;
+ }
+
+ if ((fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET) ||
+ (fault == MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS) ||
+ (mrioc->reset_in_progress))
+ goto out;
+ if (fault == MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET)
+ mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_CIACTIV_FAULT, 0);
+ else
+ mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_FAULT_WATCH, 0);
+ }
+
+schedule_work:
+ spin_lock_irqsave(&mrioc->watchdog_lock, flags);
+ if (mrioc->watchdog_work_q)
+ queue_delayed_work(mrioc->watchdog_work_q,
+ &mrioc->watchdog_work,
+ msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL));
+ spin_unlock_irqrestore(&mrioc->watchdog_lock, flags);
+out:
+ return;
+}
+
+/**
+ * mpi3mr_start_watchdog - Start watchdog
+ * @mrioc: Adapter instance reference
+ *
+ * Create and start the watchdog thread to monitor controller
+ * faults.
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc)
+{
+ if (mrioc->watchdog_work_q)
+ return;
+
+ INIT_DELAYED_WORK(&mrioc->watchdog_work, mpi3mr_watchdog_work);
+ snprintf(mrioc->watchdog_work_q_name,
+ sizeof(mrioc->watchdog_work_q_name), "watchdog_%s%d", mrioc->name,
+ mrioc->id);
+ mrioc->watchdog_work_q =
+ create_singlethread_workqueue(mrioc->watchdog_work_q_name);
+ if (!mrioc->watchdog_work_q) {
+ ioc_err(mrioc, "%s: failed (line=%d)\n", __func__, __LINE__);
+ return;
+ }
+
+ if (mrioc->watchdog_work_q)
+ queue_delayed_work(mrioc->watchdog_work_q,
+ &mrioc->watchdog_work,
+ msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL));
+}
+
+/**
+ * mpi3mr_stop_watchdog - Stop watchdog
+ * @mrioc: Adapter instance reference
+ *
+ * Stop the watchdog thread created to monitor controller
+ * faults.
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc)
+{
+ unsigned long flags;
+ struct workqueue_struct *wq;
+
+ spin_lock_irqsave(&mrioc->watchdog_lock, flags);
+ wq = mrioc->watchdog_work_q;
+ mrioc->watchdog_work_q = NULL;
+ spin_unlock_irqrestore(&mrioc->watchdog_lock, flags);
+ if (wq) {
+ if (!cancel_delayed_work_sync(&mrioc->watchdog_work))
+ flush_workqueue(wq);
+ destroy_workqueue(wq);
+ }
+}
+
/**
* mpi3mr_setup_admin_qpair - Setup admin queue pair
* @mrioc: Adapter instance reference
@@ -2609,6 +2732,8 @@ void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc)
{
enum mpi3mr_iocstate ioc_state;
+ mpi3mr_stop_watchdog(mrioc);
+
mpi3mr_ioc_disable_intr(mrioc);
ioc_state = mpi3mr_get_iocstate(mrioc);
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 7b3072e72c79..1587c8b029ad 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -281,7 +281,7 @@ void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
case MPI3_IOCSTATUS_SUCCESS:
scmd->result = (DID_OK << 16) | scsi_status;
if ((scsi_state & (MPI3_SCSI_STATE_NO_SCSI_STATUS)) ||
- (sense_state == MPI3_SCSI_STATE_SENSE_FAILED) ||
+ (sense_state == MPI3_SCSI_STATE_SENSE_FAILED) ||
(sense_state == MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY))
scmd->result = DID_SOFT_ERROR << 16;
else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
@@ -568,6 +568,7 @@ static int mpi3mr_scan_finished(struct Scsi_Host *shost,
if (mrioc->scan_started)
return 0;
ioc_info(mrioc, "%s :port enable: SUCCESS\n", __func__);
+ mpi3mr_start_watchdog(mrioc);
mrioc->is_driver_loading = 0;
return 1;
@@ -852,9 +853,11 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init(&mrioc->admin_req_lock);
spin_lock_init(&mrioc->reply_free_queue_lock);
spin_lock_init(&mrioc->sbq_lock);
+ spin_lock_init(&mrioc->watchdog_lock);
spin_lock_init(&mrioc->chain_buf_lock);
mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
+
if (pdev->revision)
mrioc->enable_segqueue = true;
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 06/24] mpi3mr: add support of event handling part-1
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (4 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 05/24] mpi3mr: add support of internal watchdog thread Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-14 11:45 ` Hannes Reinecke
2021-05-13 8:35 ` [PATCH v5 07/24] mpi3mr: add support of event handling pcie devices part-2 Kashyap Desai
` (17 subsequent siblings)
23 siblings, 1 reply; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 160767 bytes --]
Firmware can report various MPI Events.
Support for certain Events (as listed below) are enabled in the driver
and their processing in driver is covered in this patch.
MPI3_EVENT_DEVICE_ADDED
MPI3_EVENT_DEVICE_INFO_CHANGED
MPI3_EVENT_DEVICE_STATUS_CHANGE
MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE
MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST
MPI3_EVENT_SAS_DISCOVERY
MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR
Key support in this patch is device add/removal.
Fix some compilation warning reported by kernel test robot.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi/mpi30_api.h | 2 +
drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 1884 ++++++++++++++++++++++++++
drivers/scsi/mpi3mr/mpi/mpi30_sas.h | 37 +
drivers/scsi/mpi3mr/mpi3mr.h | 202 +++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 197 ++-
drivers/scsi/mpi3mr/mpi3mr_os.c | 1457 +++++++++++++++++++-
6 files changed, 3776 insertions(+), 3 deletions(-)
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_sas.h
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
index 48247c254953..aa1de696be6b 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_api.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
@@ -12,7 +12,9 @@
#ifndef MPI30_API_H
#define MPI30_API_H 1
#include "mpi30_transport.h"
+#include "mpi30_cnfg.h"
#include "mpi30_image.h"
#include "mpi30_init.h"
#include "mpi30_ioc.h"
+#include "mpi30_sas.h"
#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
new file mode 100644
index 000000000000..e0d8c027eae4
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
@@ -0,0 +1,1884 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2017-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_cnfg.h
+ * Description: Contains definitions for Configuration messages and pages
+ * Creation Date: 03/15/2017
+ * Version: 03.00.00
+ */
+#ifndef MPI30_CNFG_H
+#define MPI30_CNFG_H 1
+#define MPI3_CONFIG_PAGETYPE_IO_UNIT (0x00)
+#define MPI3_CONFIG_PAGETYPE_MANUFACTURING (0x01)
+#define MPI3_CONFIG_PAGETYPE_IOC (0x02)
+#define MPI3_CONFIG_PAGETYPE_UEFI_BSD (0x03)
+#define MPI3_CONFIG_PAGETYPE_SECURITY (0x04)
+#define MPI3_CONFIG_PAGETYPE_ENCLOSURE (0x11)
+#define MPI3_CONFIG_PAGETYPE_DEVICE (0x12)
+#define MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT (0x20)
+#define MPI3_CONFIG_PAGETYPE_SAS_EXPANDER (0x21)
+#define MPI3_CONFIG_PAGETYPE_SAS_PHY (0x23)
+#define MPI3_CONFIG_PAGETYPE_SAS_PORT (0x24)
+#define MPI3_CONFIG_PAGETYPE_PCIE_IO_UNIT (0x30)
+#define MPI3_CONFIG_PAGETYPE_PCIE_SWITCH (0x31)
+#define MPI3_CONFIG_PAGETYPE_PCIE_LINK (0x33)
+#define MPI3_CONFIG_PAGEATTR_MASK (0xf0)
+#define MPI3_CONFIG_PAGEATTR_READ_ONLY (0x00)
+#define MPI3_CONFIG_PAGEATTR_CHANGEABLE (0x10)
+#define MPI3_CONFIG_PAGEATTR_PERSISTENT (0x20)
+#define MPI3_CONFIG_ACTION_PAGE_HEADER (0x00)
+#define MPI3_CONFIG_ACTION_READ_DEFAULT (0x01)
+#define MPI3_CONFIG_ACTION_READ_CURRENT (0x02)
+#define MPI3_CONFIG_ACTION_WRITE_CURRENT (0x03)
+#define MPI3_CONFIG_ACTION_READ_PERSISTENT (0x04)
+#define MPI3_CONFIG_ACTION_WRITE_PERSISTENT (0x05)
+#define MPI3_DEVICE_PGAD_FORM_MASK (0xf0000000)
+#define MPI3_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI3_DEVICE_PGAD_FORM_HANDLE (0x20000000)
+#define MPI3_DEVICE_PGAD_HANDLE_MASK (0x0000ffff)
+#define MPI3_SAS_EXPAND_PGAD_FORM_MASK (0xf0000000)
+#define MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM (0x10000000)
+#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE (0x20000000)
+#define MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00ff0000)
+#define MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
+#define MPI3_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000ffff)
+#define MPI3_SAS_PHY_PGAD_FORM_MASK (0xf0000000)
+#define MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
+#define MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000ff)
+#define MPI3_SASPORT_PGAD_FORM_MASK (0xf0000000)
+#define MPI3_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
+#define MPI3_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
+#define MPI3_SASPORT_PGAD_PORT_NUMBER_MASK (0x000000ff)
+#define MPI3_ENCLOS_PGAD_FORM_MASK (0xf0000000)
+#define MPI3_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI3_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
+#define MPI3_ENCLOS_PGAD_HANDLE_MASK (0x0000ffff)
+#define MPI3_PCIE_SWITCH_PGAD_FORM_MASK (0xf0000000)
+#define MPI3_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE_PORT_NUM (0x10000000)
+#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE (0x20000000)
+#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00ff0000)
+#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16)
+#define MPI3_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000ffff)
+#define MPI3_PCIE_LINK_PGAD_FORM_MASK (0xf0000000)
+#define MPI3_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000)
+#define MPI3_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000)
+#define MPI3_PCIE_LINK_PGAD_LINKNUM_MASK (0x000000ff)
+#define MPI3_SECURITY_PGAD_FORM_MASK (0xf0000000)
+#define MPI3_SECURITY_PGAD_FORM_GET_NEXT_SLOT (0x00000000)
+#define MPI3_SECURITY_PGAD_FORM_SOT_NUM (0x10000000)
+#define MPI3_SECURITY_PGAD_SLOT_GROUP_MASK (0x0000ff00)
+#define MPI3_SECURITY_PGAD_SLOT_MASK (0x000000ff)
+struct _mpi3_config_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ u8 page_version;
+ u8 page_number;
+ u8 page_type;
+ u8 action;
+ __le32 page_address;
+ __le16 page_length;
+ __le16 reserved16;
+ __le32 reserved18[2];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_config_page_header {
+ u8 page_version;
+ u8 reserved01;
+ u8 page_number;
+ u8 page_attribute;
+ __le16 page_length;
+ u8 page_type;
+ u8 reserved07;
+};
+
+#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK (0xf0)
+#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT (4)
+#define MPI3_SAS_NEG_LINK_RATE_PHYSICAL_MASK (0x0f)
+#define MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
+#define MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
+#define MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
+#define MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
+#define MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
+#define MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
+#define MPI3_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
+#define MPI3_SAS_NEG_LINK_RATE_1_5 (0x08)
+#define MPI3_SAS_NEG_LINK_RATE_3_0 (0x09)
+#define MPI3_SAS_NEG_LINK_RATE_6_0 (0x0a)
+#define MPI3_SAS_NEG_LINK_RATE_12_0 (0x0b)
+#define MPI3_SAS_NEG_LINK_RATE_22_5 (0x0c)
+#define MPI3_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
+#define MPI3_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
+#define MPI3_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
+#define MPI3_SAS_APHYINFO_REASON_MASK (0x0000000f)
+#define MPI3_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
+#define MPI3_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
+#define MPI3_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
+#define MPI3_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
+#define MPI3_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
+#define MPI3_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
+#define MPI3_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
+#define MPI3_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
+#define MPI3_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
+#define MPI3_SAS_APHYINFO_REASON_EXP_REDUCED_FUNC (0x00000009)
+#define MPI3_SAS_PHYINFO_STATUS_MASK (0xc0000000)
+#define MPI3_SAS_PHYINFO_STATUS_SHIFT (30)
+#define MPI3_SAS_PHYINFO_STATUS_ACCESSIBLE (0x00000000)
+#define MPI3_SAS_PHYINFO_STATUS_NOT_EXIST (0x40000000)
+#define MPI3_SAS_PHYINFO_STATUS_VACANT (0x80000000)
+#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
+#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_ACTIVE (0x00000000)
+#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_PARTIAL (0x08000000)
+#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_SLUMBER (0x10000000)
+#define MPI3_SAS_PHYINFO_REASON_MASK (0x000f0000)
+#define MPI3_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
+#define MPI3_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
+#define MPI3_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
+#define MPI3_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
+#define MPI3_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
+#define MPI3_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
+#define MPI3_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
+#define MPI3_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
+#define MPI3_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
+#define MPI3_SAS_PHYINFO_REASON_EXP_REDUCED_FUNC (0x00090000)
+#define MPI3_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
+#define MPI3_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
+#define MPI3_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
+#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_MASK (0x00000f00)
+#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_SHIFT (8)
+#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_MASK (0x000000f0)
+#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_DIRECT (0x00000000)
+#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_SUBTRACTIVE (0x00000010)
+#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_TABLE (0x00000020)
+#define MPI3_SAS_PRATE_MAX_RATE_MASK (0xf0)
+#define MPI3_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
+#define MPI3_SAS_PRATE_MAX_RATE_1_5 (0x80)
+#define MPI3_SAS_PRATE_MAX_RATE_3_0 (0x90)
+#define MPI3_SAS_PRATE_MAX_RATE_6_0 (0xa0)
+#define MPI3_SAS_PRATE_MAX_RATE_12_0 (0xb0)
+#define MPI3_SAS_PRATE_MAX_RATE_22_5 (0xc0)
+#define MPI3_SAS_PRATE_MIN_RATE_MASK (0x0f)
+#define MPI3_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
+#define MPI3_SAS_PRATE_MIN_RATE_1_5 (0x08)
+#define MPI3_SAS_PRATE_MIN_RATE_3_0 (0x09)
+#define MPI3_SAS_PRATE_MIN_RATE_6_0 (0x0a)
+#define MPI3_SAS_PRATE_MIN_RATE_12_0 (0x0b)
+#define MPI3_SAS_PRATE_MIN_RATE_22_5 (0x0c)
+#define MPI3_SAS_HWRATE_MAX_RATE_MASK (0xf0)
+#define MPI3_SAS_HWRATE_MAX_RATE_1_5 (0x80)
+#define MPI3_SAS_HWRATE_MAX_RATE_3_0 (0x90)
+#define MPI3_SAS_HWRATE_MAX_RATE_6_0 (0xa0)
+#define MPI3_SAS_HWRATE_MAX_RATE_12_0 (0xb0)
+#define MPI3_SAS_HWRATE_MAX_RATE_22_5 (0xc0)
+#define MPI3_SAS_HWRATE_MIN_RATE_MASK (0x0f)
+#define MPI3_SAS_HWRATE_MIN_RATE_1_5 (0x08)
+#define MPI3_SAS_HWRATE_MIN_RATE_3_0 (0x09)
+#define MPI3_SAS_HWRATE_MIN_RATE_6_0 (0x0a)
+#define MPI3_SAS_HWRATE_MIN_RATE_12_0 (0x0b)
+#define MPI3_SAS_HWRATE_MIN_RATE_22_5 (0x0c)
+#define MPI3_SLOT_INVALID (0xffff)
+#define MPI3_SLOT_INDEX_INVALID (0xffff)
+struct _mpi3_man_page0 {
+ struct _mpi3_config_page_header header;
+ u8 chip_revision[8];
+ u8 chip_name[32];
+ u8 board_name[32];
+ u8 board_assembly[32];
+ u8 board_tracer_number[32];
+ __le32 board_power;
+ __le32 reserved94;
+ __le32 reserved98;
+ u8 oem;
+ u8 sub_oem;
+ __le16 reserved9e;
+ u8 board_mfg_day;
+ u8 board_mfg_month;
+ __le16 board_mfg_year;
+ u8 board_rework_day;
+ u8 board_rework_month;
+ __le16 board_rework_year;
+ __le64 board_revision;
+ u8 e_pack_fru[16];
+ u8 product_name[256];
+};
+
+#define MPI3_MAN0_PAGEVERSION (0x00)
+#define MPI3_MAN1_VPD_SIZE (512)
+struct _mpi3_man_page1 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08[2];
+ u8 vpd[MPI3_MAN1_VPD_SIZE];
+};
+
+#define MPI3_MAN1_PAGEVERSION (0x00)
+struct _mpi3_man5_phy_entry {
+ __le64 ioc_wwid;
+ __le64 device_name;
+ __le64 sata_wwid;
+};
+
+#ifndef MPI3_MAN5_PHY_MAX
+#define MPI3_MAN5_PHY_MAX (1)
+#endif
+struct _mpi3_man_page5 {
+ struct _mpi3_config_page_header header;
+ u8 num_phys;
+ u8 reserved09[3];
+ __le32 reserved0c;
+ struct _mpi3_man5_phy_entry phy[MPI3_MAN5_PHY_MAX];
+};
+
+#define MPI3_MAN5_PAGEVERSION (0x00)
+struct _mpi3_man6_gpio_entry {
+ u8 function_code;
+ u8 reserved01;
+ __le16 flags;
+ u8 param1;
+ u8 param2;
+ __le16 reserved06;
+ __le32 param3;
+};
+
+#define MPI3_MAN6_GPIO_FUNCTION_GENERIC (0x00)
+#define MPI3_MAN6_GPIO_FUNCTION_ALTERNATE (0x01)
+#define MPI3_MAN6_GPIO_FUNCTION_EXT_INTERRUPT (0x02)
+#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_ACTIVITY (0x03)
+#define MPI3_MAN6_GPIO_FUNCTION_OVER_TEMPERATURE (0x04)
+#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_GREEN (0x05)
+#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_YELLOW (0x06)
+#define MPI3_MAN6_GPIO_FUNCTION_CABLE_MANAGEMENT (0x07)
+#define MPI3_MAN6_GPIO_FUNCTION_BKPLANE_MGMT_TYPE (0x08)
+#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_MUX_RESET (0x09)
+#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_RESET (0x0a)
+#define MPI3_MAN6_GPIO_FUNCTION_BACKEND_PCIE_RESET (0x0b)
+#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_FAULT (0x0c)
+#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ATTN (0x0d)
+#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ONLINE (0x0e)
+#define MPI3_MAN6_GPIO_FUNCTION_EPACK_FAULT (0x0f)
+#define MPI3_MAN6_GPIO_FUNCTION_CTRL_TYPE (0x10)
+#define MPI3_MAN6_GPIO_FUNCTION_LICENSE (0x11)
+#define MPI3_MAN6_GPIO_FUNCTION_REFCLK_CONTROL (0x12)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_MASK (0xf0)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_GENERIC (0x00)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_CABLE_MGMT (0x10)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_ACTIVE_CABLE_OVERCURRENT (0x20)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_MASK (0x01)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_EDGE (0x00)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_LEVEL (0x01)
+#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ALL_UP (0x00)
+#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ONE_OR_MORE_UP (0x01)
+#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_MODULE_PRESENT (0x00)
+#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_ACTIVE_CABLE_ENABLE (0x01)
+#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_CABLE_MGMT_ENABLE (0x02)
+#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_SPEC_MUX (0x00)
+#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_ALL_MUXES (0x01)
+#define MPI3_MAN6_GPIO_LICENSE_PARAM1_TYPE_IBUTTON (0x00)
+#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_MASK (0x0100)
+#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_FAST_EDGE (0x0100)
+#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_SLOW_EDGE (0x0000)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_MASK (0x00c0)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_100OHM (0x0000)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_66OHM (0x0040)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_50OHM (0x0080)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_33OHM (0x00c0)
+#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_MASK (0x0030)
+#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_SHIFT (4)
+#define MPI3_MAN6_GPIO_FLAGS_ACTIVE_HIGH (0x0008)
+#define MPI3_MAN6_GPIO_FLAGS_BI_DIR_ENABLED (0x0004)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_MASK (0x0003)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_INPUT (0x0000)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_DRAIN_OUTPUT (0x0001)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_SOURCE_OUTPUT (0x0002)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_PUSH_PULL_OUTPUT (0x0003)
+#ifndef MPI3_MAN6_GPIO_MAX
+#define MPI3_MAN6_GPIO_MAX (1)
+#endif
+struct _mpi3_man_page6 {
+ struct _mpi3_config_page_header header;
+ __le16 flags;
+ __le16 reserved0a;
+ u8 num_gpio;
+ u8 reserved0d[3];
+ struct _mpi3_man6_gpio_entry gpio[MPI3_MAN6_GPIO_MAX];
+};
+
+#define MPI3_MAN6_PAGEVERSION (0x00)
+#define MPI3_MAN6_FLAGS_HEARTBEAT_LED_DISABLED (0x0001)
+struct _mpi3_man7_receptacle_info {
+ __le32 name[4];
+ u8 location;
+ u8 connector_type;
+ u8 ped_clk;
+ u8 connector_id;
+ __le32 reserved14;
+};
+
+#define MPI3_MAN7_LOCATION_UNKNOWN (0x00)
+#define MPI3_MAN7_LOCATION_INTERNAL (0x01)
+#define MPI3_MAN7_LOCATION_EXTERNAL (0x02)
+#define MPI3_MAN7_LOCATION_VIRTUAL (0x03)
+#define MPI3_MAN7_PEDCLK_ROUTING_MASK (0x10)
+#define MPI3_MAN7_PEDCLK_ROUTING_DIRECT (0x00)
+#define MPI3_MAN7_PEDCLK_ROUTING_CLOCK_BUFFER (0x10)
+#define MPI3_MAN7_PEDCLK_ID_MASK (0x0f)
+#ifndef MPI3_MAN7_RECEPTACLE_INFO_MAX
+#define MPI3_MAN7_RECEPTACLE_INFO_MAX (1)
+#endif
+struct _mpi3_man_page7 {
+ struct _mpi3_config_page_header header;
+ __le32 flags;
+ u8 num_receptacles;
+ u8 reserved0d[3];
+ __le32 enclosure_name[4];
+ struct _mpi3_man7_receptacle_info receptacle_info[MPI3_MAN7_RECEPTACLE_INFO_MAX];
+};
+
+#define MPI3_MAN7_PAGEVERSION (0x00)
+#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_MASK (0x01)
+#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_0 (0x00)
+#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_1 (0x01)
+struct _mpi3_man8_phy_info {
+ u8 receptacle_id;
+ u8 connector_lane;
+ __le16 reserved02;
+ __le16 slotx1;
+ __le16 slotx2;
+ __le16 slotx4;
+ __le16 reserved0a;
+ __le32 reserved0c;
+};
+
+#ifndef MPI3_MAN8_PHY_INFO_MAX
+#define MPI3_MAN8_PHY_INFO_MAX (1)
+#endif
+struct _mpi3_man_page8 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_phys;
+ u8 reserved0d[3];
+ struct _mpi3_man8_phy_info phy_info[MPI3_MAN8_PHY_INFO_MAX];
+};
+
+#define MPI3_MAN8_PAGEVERSION (0x00)
+struct _mpi3_man9_rsrc_entry {
+ __le32 maximum;
+ __le32 decrement;
+ __le32 minimum;
+ __le32 actual;
+};
+
+enum mpi3_man9_resources {
+ MPI3_MAN9_RSRC_OUTSTANDING_REQS = 0,
+ MPI3_MAN9_RSRC_TARGET_CMDS = 1,
+ MPI3_MAN9_RSRC_SAS_TARGETS = 2,
+ MPI3_MAN9_RSRC_PCIE_TARGETS = 3,
+ MPI3_MAN9_RSRC_INITIATORS = 4,
+ MPI3_MAN9_RSRC_VDS = 5,
+ MPI3_MAN9_RSRC_ENCLOSURES = 6,
+ MPI3_MAN9_RSRC_ENCLOSURE_PHYS = 7,
+ MPI3_MAN9_RSRC_EXPANDERS = 8,
+ MPI3_MAN9_RSRC_PCIE_SWITCHES = 9,
+ MPI3_MAN9_RSRC_PDS = 10,
+ MPI3_MAN9_RSRC_HOST_PDS = 11,
+ MPI3_MAN9_RSRC_ADV_HOST_PDS = 12,
+ MPI3_MAN9_RSRC_RAID_PDS = 13,
+ MPI3_MAN9_RSRC_NUM_RESOURCES
+};
+
+#define MPI3_MAN9_MIN_OUTSTANDING_REQS (1)
+#define MPI3_MAN9_MAX_OUTSTANDING_REQS (65000)
+#define MPI3_MAN9_MIN_TARGET_CMDS (0)
+#define MPI3_MAN9_MAX_TARGET_CMDS (65535)
+#define MPI3_MAN9_MIN_SAS_TARGETS (0)
+#define MPI3_MAN9_MAX_SAS_TARGETS (65535)
+#define MPI3_MAN9_MIN_PCIE_TARGETS (0)
+#define MPI3_MAN9_MIN_INITIATORS (0)
+#define MPI3_MAN9_MAX_INITIATORS (65535)
+#define MPI3_MAN9_MIN_ENCLOSURES (0)
+#define MPI3_MAN9_MAX_ENCLOSURES (65535)
+#define MPI3_MAN9_MIN_ENCLOSURE_PHYS (0)
+#define MPI3_MAN9_MIN_EXPANDERS (0)
+#define MPI3_MAN9_MAX_EXPANDERS (65535)
+#define MPI3_MAN9_MIN_PCIE_SWITCHES (0)
+struct _mpi3_man_page9 {
+ struct _mpi3_config_page_header header;
+ u8 num_resources;
+ u8 reserved09;
+ __le16 reserved0a;
+ __le32 reserved0c;
+ __le32 reserved10;
+ __le32 reserved14;
+ __le32 reserved18;
+ __le32 reserved1c;
+ struct _mpi3_man9_rsrc_entry resource[MPI3_MAN9_RSRC_NUM_RESOURCES];
+};
+
+#define MPI3_MAN9_PAGEVERSION (0x00)
+struct _mpi3_man10_istwi_ctrlr_entry {
+ __le16 slave_address;
+ __le16 flags;
+ __le32 reserved04;
+};
+
+#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_SLAVE_ENABLED (0x0002)
+#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_MASTER_ENABLED (0x0001)
+#ifndef MPI3_MAN10_ISTWI_CTRLR_MAX
+#define MPI3_MAN10_ISTWI_CTRLR_MAX (1)
+#endif
+struct _mpi3_man_page10 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_istwi_ctrl;
+ u8 reserved0d[3];
+ struct _mpi3_man10_istwi_ctrlr_entry istwi_controller[MPI3_MAN10_ISTWI_CTRLR_MAX];
+};
+
+#define MPI3_MAN10_PAGEVERSION (0x00)
+struct _mpi3_man11_mux_device_format {
+ u8 max_channel;
+ u8 reserved01[3];
+ __le32 reserved04;
+};
+
+struct _mpi3_man11_temp_sensor_device_format {
+ u8 type;
+ u8 reserved01[3];
+ u8 temp_channel[4];
+};
+
+#define MPI3_MAN11_TEMP_SENSOR_TYPE_MAX6654 (0x00)
+#define MPI3_MAN11_TEMP_SENSOR_TYPE_EMC1442 (0x01)
+#define MPI3_MAN11_TEMP_SENSOR_TYPE_ADT7476 (0x02)
+#define MPI3_MAN11_TEMP_SENSOR_CHANNEL_ENABLED (0x01)
+struct _mpi3_man11_seeprom_device_format {
+ u8 size;
+ u8 page_write_size;
+ __le16 reserved02;
+ __le32 reserved04;
+};
+
+#define MPI3_MAN11_SEEPROM_SIZE_1KBITS (0x01)
+#define MPI3_MAN11_SEEPROM_SIZE_2KBITS (0x02)
+#define MPI3_MAN11_SEEPROM_SIZE_4KBITS (0x03)
+#define MPI3_MAN11_SEEPROM_SIZE_8KBITS (0x04)
+#define MPI3_MAN11_SEEPROM_SIZE_16KBITS (0x05)
+#define MPI3_MAN11_SEEPROM_SIZE_32KBITS (0x06)
+#define MPI3_MAN11_SEEPROM_SIZE_64KBITS (0x07)
+#define MPI3_MAN11_SEEPROM_SIZE_128KBITS (0x08)
+struct _mpi3_man11_ddr_spd_device_format {
+ u8 channel;
+ u8 reserved01[3];
+ __le32 reserved04;
+};
+
+struct _mpi3_man11_cable_mgmt_device_format {
+ u8 type;
+ u8 receptacle_id;
+ __le16 reserved02;
+ __le32 reserved04;
+};
+
+#define MPI3_MAN11_CABLE_MGMT_TYPE_SFF_8636 (0x00)
+struct _mpi3_man11_bkplane_spec_ubm_format {
+ __le16 flags;
+ __le16 reserved02;
+};
+
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0200)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_FORCE_POLLING (0x0100)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_MASK (0x00f0)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_SHIFT (4)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_MASK (0x000f)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_SHIFT (0)
+struct _mpi3_man11_bkplane_spec_vpp_format {
+ __le16 flags;
+ __le16 reserved02;
+};
+
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0040)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_MASK (0x0030)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_GPIO (0x0000)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_REG (0x0010)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_MASK (0x000f)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_SHIFT (0)
+union _mpi3_man11_bkplane_spec_format {
+ struct _mpi3_man11_bkplane_spec_ubm_format ubm;
+ struct _mpi3_man11_bkplane_spec_vpp_format vpp;
+};
+
+struct _mpi3_man11_bkplane_mgmt_device_format {
+ u8 type;
+ u8 receptacle_id;
+ __le16 reserved02;
+ union _mpi3_man11_bkplane_spec_format backplane_mgmt_specific;
+};
+
+#define MPI3_MAN11_BKPLANE_MGMT_TYPE_UBM (0x00)
+#define MPI3_MAN11_BKPLANE_MGMT_TYPE_VPP (0x01)
+struct _mpi3_man11_gas_gauge_device_format {
+ u8 type;
+ u8 reserved01[3];
+ __le32 reserved04;
+};
+
+#define MPI3_MAN11_GAS_GAUGE_TYPE_STANDARD (0x00)
+union _mpi3_man11_device_specific_format {
+ struct _mpi3_man11_mux_device_format mux;
+ struct _mpi3_man11_temp_sensor_device_format temp_sensor;
+ struct _mpi3_man11_seeprom_device_format seeprom;
+ struct _mpi3_man11_ddr_spd_device_format ddr_spd;
+ struct _mpi3_man11_cable_mgmt_device_format cable_mgmt;
+ struct _mpi3_man11_bkplane_mgmt_device_format bkplane_mgmt;
+ struct _mpi3_man11_gas_gauge_device_format gas_gauge;
+ __le32 words[2];
+};
+
+struct _mpi3_man11_istwi_device_format {
+ u8 device_type;
+ u8 controller;
+ u8 reserved02;
+ u8 flags;
+ __le16 device_address;
+ u8 mux_channel;
+ u8 mux_index;
+ union _mpi3_man11_device_specific_format device_specific;
+};
+
+#define MPI3_MAN11_ISTWI_DEVTYPE_MUX (0x00)
+#define MPI3_MAN11_ISTWI_DEVTYPE_TEMP_SENSOR (0x01)
+#define MPI3_MAN11_ISTWI_DEVTYPE_SEEPROM (0x02)
+#define MPI3_MAN11_ISTWI_DEVTYPE_DDR_SPD (0x03)
+#define MPI3_MAN11_ISTWI_DEVTYPE_CABLE_MGMT (0x04)
+#define MPI3_MAN11_ISTWI_DEVTYPE_BACKPLANE_MGMT (0x05)
+#define MPI3_MAN11_ISTWI_DEVTYPE_GAS_GAUGE (0x06)
+#define MPI3_MAN11_ISTWI_FLAGS_MUX_PRESENT (0x01)
+#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_MASK (0x06)
+#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_100KHZ (0x00)
+#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_400KHZ (0x02)
+#ifndef MPI3_MAN11_ISTWI_DEVICE_MAX
+#define MPI3_MAN11_ISTWI_DEVICE_MAX (1)
+#endif
+struct _mpi3_man_page11 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_istwi_dev;
+ u8 reserved0d[3];
+ struct _mpi3_man11_istwi_device_format istwi_device[MPI3_MAN11_ISTWI_DEVICE_MAX];
+};
+
+#define MPI3_MAN11_PAGEVERSION (0x00)
+#ifndef MPI3_MAN12_NUM_SGPIO_MAX
+#define MPI3_MAN12_NUM_SGPIO_MAX (1)
+#endif
+struct _mpi3_man12_sgpio_info {
+ u8 slot_count;
+ u8 reserved01[3];
+ __le32 reserved04;
+ u8 phy_order[32];
+};
+
+struct _mpi3_man_page12 {
+ struct _mpi3_config_page_header header;
+ __le32 flags;
+ __le32 s_clock_freq;
+ __le32 activity_modulation;
+ u8 num_sgpio;
+ u8 reserved15[3];
+ __le32 reserved18;
+ __le32 reserved1c;
+ __le32 pattern[8];
+ struct _mpi3_man12_sgpio_info sgpio_info[MPI3_MAN12_NUM_SGPIO_MAX];
+};
+
+#define MPI3_MAN12_PAGEVERSION (0x00)
+#define MPI3_MAN12_FLAGS_ERROR_PRESENCE_ENABLED (0x0400)
+#define MPI3_MAN12_FLAGS_ACTIVITY_INVERT_ENABLED (0x0200)
+#define MPI3_MAN12_FLAGS_GROUP_ID_DISABLED (0x0100)
+#define MPI3_MAN12_FLAGS_SIO_CLK_FILTER_ENABLED (0x0004)
+#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_MASK (0x0002)
+#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_PUSH_PULL (0x0000)
+#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_OPEN_DRAIN (0x0002)
+#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_MASK (0x0001)
+#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_PUSH_PULL (0x0000)
+#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_OPEN_DRAIN (0x0001)
+#define MPI3_MAN12_SIO_CLK_FREQ_MIN (32)
+#define MPI3_MAN12_SIO_CLK_FREQ_MAX (100000)
+#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_MASK (0x0000f000)
+#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_SHIFT (12)
+#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_MASK (0x00000f00)
+#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_SHIFT (8)
+#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_MASK (0x000000f0)
+#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_SHIFT (4)
+#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_MASK (0x0000000f)
+#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_SHIFT (0)
+#define MPI3_MAN12_PATTERN_RATE_MASK (0xe0000000)
+#define MPI3_MAN12_PATTERN_RATE_2_HZ (0x00000000)
+#define MPI3_MAN12_PATTERN_RATE_4_HZ (0x20000000)
+#define MPI3_MAN12_PATTERN_RATE_8_HZ (0x40000000)
+#define MPI3_MAN12_PATTERN_RATE_16_HZ (0x60000000)
+#define MPI3_MAN12_PATTERN_RATE_10_HZ (0x80000000)
+#define MPI3_MAN12_PATTERN_RATE_20_HZ (0xa0000000)
+#define MPI3_MAN12_PATTERN_RATE_40_HZ (0xc0000000)
+#define MPI3_MAN12_PATTERN_LENGTH_MASK (0x1f000000)
+#define MPI3_MAN12_PATTERN_LENGTH_SHIFT (24)
+#define MPI3_MAN12_PATTERN_BIT_PATTERN_MASK (0x00ffffff)
+#define MPI3_MAN12_PATTERN_BIT_PATTERN_SHIFT (0)
+#ifndef MPI3_MAN13_NUM_TRANSLATION_MAX
+#define MPI3_MAN13_NUM_TRANSLATION_MAX (1)
+#endif
+struct _mpi3_man13_translation_info {
+ __le32 slot_status;
+ __le32 mask;
+ u8 activity;
+ u8 locate;
+ u8 error;
+ u8 reserved0b;
+};
+
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_FAULT (0x20000000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_OFF (0x10000000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_ACTIVITY (0x00800000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DO_NOT_REMOVE (0x00400000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_MISSING (0x00100000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_INSERT (0x00080000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REMOVAL (0x00040000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IDENTIFY (0x00020000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_OK (0x00008000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_RESERVED_DEVICE (0x00004000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_HOT_SPARE (0x00002000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000800)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_FAILED_ARRAY (0x00000400)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP (0x00000200)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP_ABORT (0x00000100)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_PREDICTED_FAILURE (0x00000040)
+#define MPI3_MAN13_BLINK_PATTERN_FORCE_OFF (0x00)
+#define MPI3_MAN13_BLINK_PATTERN_FORCE_ON (0x01)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_0 (0x02)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_1 (0x03)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_2 (0x04)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_3 (0x05)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_4 (0x06)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_5 (0x07)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_6 (0x08)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_7 (0x09)
+#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY (0x0a)
+#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY_TRAIL (0x0b)
+struct _mpi3_man_page13 {
+ struct _mpi3_config_page_header header;
+ u8 num_trans;
+ u8 reserved09[3];
+ __le32 reserved0c;
+ struct _mpi3_man13_translation_info translation[MPI3_MAN13_NUM_TRANSLATION_MAX];
+};
+
+#define MPI3_MAN13_PAGEVERSION (0x00)
+struct _mpi3_man_page14 {
+ struct _mpi3_config_page_header header;
+ __le16 flags;
+ __le16 reserved0a;
+ u8 num_slot_groups;
+ u8 num_slots;
+ __le16 max_cert_chain_length;
+ __le32 sealed_slots;
+};
+
+#define MPI3_MAN14_PAGEVERSION (0x00)
+#define MPI3_MAN14_FLAGS_AUTH_SESSION_REQ (0x01)
+#define MPI3_MAN14_FLAGS_AUTH_API_MASK (0x0e)
+#define MPI3_MAN14_FLAGS_AUTH_API_NONE (0x00)
+#define MPI3_MAN14_FLAGS_AUTH_API_CEREBUS (0x02)
+#define MPI3_MAN14_FLAGS_AUTH_API_DMTF_PMCI (0x04)
+#ifndef MPI3_MAN15_VERSION_RECORD_MAX
+#define MPI3_MAN15_VERSION_RECORD_MAX 1
+#endif
+struct _mpi3_man15_version_record {
+ __le16 spdm_version;
+ __le16 reserved02;
+};
+
+struct _mpi3_man_page15 {
+ struct _mpi3_config_page_header header;
+ u8 num_version_records;
+ u8 reserved09[3];
+ __le32 reserved0c;
+ struct _mpi3_man15_version_record version_record[MPI3_MAN15_VERSION_RECORD_MAX];
+};
+
+#define MPI3_MAN15_PAGEVERSION (0x00)
+#ifndef MPI3_MAN16_CERT_ALGO_MAX
+#define MPI3_MAN16_CERT_ALGO_MAX 1
+#endif
+struct _mpi3_man16_certificate_algorithm {
+ u8 slot_group;
+ u8 reserved01[3];
+ __le32 base_asym_algo;
+ __le32 base_hash_algo;
+ __le32 reserved0c[3];
+};
+
+struct _mpi3_man_page16 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_cert_algos;
+ u8 reserved0d[3];
+ struct _mpi3_man16_certificate_algorithm certificate_algorithm[MPI3_MAN16_CERT_ALGO_MAX];
+};
+
+#define MPI3_MAN16_PAGEVERSION (0x00)
+#ifndef MPI3_MAN17_HASH_ALGORITHM_MAX
+#define MPI3_MAN17_HASH_ALGORITHM_MAX 1
+#endif
+struct _mpi3_man17_hash_algorithm {
+ u8 meas_specification;
+ u8 reserved01[3];
+ __le32 measurement_hash_algo;
+ __le32 reserved08[2];
+};
+
+struct _mpi3_man_page17 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_hash_algos;
+ u8 reserved0d[3];
+ struct _mpi3_man17_hash_algorithm hash_algorithm[MPI3_MAN17_HASH_ALGORITHM_MAX];
+};
+
+#define MPI3_MAN17_PAGEVERSION (0x00)
+struct _mpi3_man_page20 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ __le32 nonpremium_features;
+ u8 allowed_personalities;
+ u8 reserved11[3];
+};
+
+#define MPI3_MAN20_PAGEVERSION (0x00)
+#define MPI3_MAN20_ALLOWEDPERSON_RAID_MASK (0x02)
+#define MPI3_MAN20_ALLOWEDPERSON_RAID_ALLOWED (0x02)
+#define MPI3_MAN20_ALLOWEDPERSON_RAID_NOT_ALLOWED (0x00)
+#define MPI3_MAN20_ALLOWEDPERSON_EHBA_MASK (0x01)
+#define MPI3_MAN20_ALLOWEDPERSON_EHBA_ALLOWED (0x01)
+#define MPI3_MAN20_ALLOWEDPERSON_EHBA_NOT_ALLOWED (0x00)
+#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_MASK (0x01)
+#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_ENABLED (0x00)
+#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_DISABLED (0x01)
+struct _mpi3_man_page21 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ __le32 flags;
+};
+
+#define MPI3_MAN21_PAGEVERSION (0x00)
+#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_MASK (0x80)
+#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_ENABLED (0x80)
+#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_DISABLED (0x00)
+#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_MASK (0x60)
+#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_BLOCK (0x00)
+#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_ALLOW (0x20)
+#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_WARN (0x40)
+#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_MASK (0x08)
+#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_ALLOW (0x00)
+#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_PREVENT (0x08)
+#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_MASK (0x01)
+#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_DEFAULT (0x00)
+#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_OEM_SPECIFIC (0x01)
+#ifndef MPI3_MAN_PROD_SPECIFIC_MAX
+#define MPI3_MAN_PROD_SPECIFIC_MAX (1)
+#endif
+struct _mpi3_man_page_product_specific {
+ struct _mpi3_config_page_header header;
+ __le32 product_specific_info[MPI3_MAN_PROD_SPECIFIC_MAX];
+};
+
+struct _mpi3_io_unit_page0 {
+ struct _mpi3_config_page_header header;
+ __le64 unique_value;
+ __le32 nvdata_version_default;
+ __le32 nvdata_version_persistent;
+};
+
+#define MPI3_IOUNIT0_PAGEVERSION (0x00)
+struct _mpi3_io_unit_page1 {
+ struct _mpi3_config_page_header header;
+ __le32 flags;
+ u8 dmd_io_delay;
+ u8 dmd_report_pc_ie;
+ u8 dmd_report_sata;
+ u8 dmd_report_sas;
+};
+
+#define MPI3_IOUNIT1_PAGEVERSION (0x00)
+#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_MASK (0x00000030)
+#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_ENABLE (0x00000000)
+#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_DISABLE (0x00000010)
+#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_NO_MODIFY (0x00000020)
+#define MPI3_IOUNIT1_FLAGS_ATA_SECURITY_FREEZE_LOCK (0x00000008)
+#define MPI3_IOUNIT1_FLAGS_WRITE_SAME_BUFFER (0x00000004)
+#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_MASK (0x00000003)
+#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_ENABLE (0x00000000)
+#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_DISABLE (0x00000001)
+#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_UNCHANGED (0x00000002)
+#define MPI3_IOUNIT1_DMD_REPORT_DELAY_TIME_MASK (0x7f)
+#define MPI3_IOUNIT1_DMD_REPORT_UNIT_16_SEC (0x80)
+#ifndef MPI3_IO_UNIT2_GPIO_VAL_MAX
+#define MPI3_IO_UNIT2_GPIO_VAL_MAX (1)
+#endif
+struct _mpi3_io_unit_page2 {
+ struct _mpi3_config_page_header header;
+ u8 gpio_count;
+ u8 reserved09[3];
+ __le16 gpio_val[MPI3_IO_UNIT2_GPIO_VAL_MAX];
+};
+
+#define MPI3_IOUNIT2_PAGEVERSION (0x00)
+#define MPI3_IOUNIT2_GPIO_FUNCTION_MASK (0xfffc)
+#define MPI3_IOUNIT2_GPIO_FUNCTION_SHIFT (2)
+#define MPI3_IOUNIT2_GPIO_SETTING_MASK (0x0001)
+#define MPI3_IOUNIT2_GPIO_SETTING_OFF (0x0000)
+#define MPI3_IOUNIT2_GPIO_SETTING_ON (0x0001)
+struct _mpi3_io_unit3_sensor {
+ __le16 flags;
+ __le16 reserved02;
+ __le16 threshold[4];
+ __le32 reserved0c;
+ __le32 reserved10;
+ __le32 reserved14;
+};
+
+#define MPI3_IOUNIT3_SENSOR_FLAGS_T3_ENABLE (0x0008)
+#define MPI3_IOUNIT3_SENSOR_FLAGS_T2_ENABLE (0x0004)
+#define MPI3_IOUNIT3_SENSOR_FLAGS_T1_ENABLE (0x0002)
+#define MPI3_IOUNIT3_SENSOR_FLAGS_T0_ENABLE (0x0001)
+#ifndef MPI3_IO_UNIT3_SENSOR_MAX
+#define MPI3_IO_UNIT3_SENSOR_MAX (1)
+#endif
+struct _mpi3_io_unit_page3 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_sensors;
+ u8 polling_interval;
+ __le16 reserved0e;
+ struct _mpi3_io_unit3_sensor sensor[MPI3_IO_UNIT3_SENSOR_MAX];
+};
+
+#define MPI3_IOUNIT3_PAGEVERSION (0x00)
+struct _mpi3_io_unit4_sensor {
+ __le16 current_temperature;
+ __le16 reserved02;
+ u8 flags;
+ u8 reserved05[3];
+ __le32 reserved08;
+ __le32 reserved0c;
+};
+
+#define MPI3_IOUNIT4_SENSOR_FLAGS_TEMP_VALID (0x01)
+#ifndef MPI3_IO_UNIT4_SENSOR_MAX
+#define MPI3_IO_UNIT4_SENSOR_MAX (1)
+#endif
+struct _mpi3_io_unit_page4 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_sensors;
+ u8 reserved0d[3];
+ struct _mpi3_io_unit4_sensor sensor[MPI3_IO_UNIT4_SENSOR_MAX];
+};
+
+#define MPI3_IOUNIT4_PAGEVERSION (0x00)
+struct _mpi3_io_unit5_spinup_group {
+ u8 max_target_spinup;
+ u8 spinup_delay;
+ u8 spinup_flags;
+ u8 reserved03;
+};
+
+#define MPI3_IOUNIT5_SPINUP_FLAGS_DISABLE (0x01)
+#ifndef MPI3_IO_UNIT5_PHY_MAX
+#define MPI3_IO_UNIT5_PHY_MAX (4)
+#endif
+struct _mpi3_io_unit_page5 {
+ struct _mpi3_config_page_header header;
+ struct _mpi3_io_unit5_spinup_group spinup_group_parameters[4];
+ __le32 reserved18;
+ __le32 reserved1c;
+ __le32 reserved20;
+ u8 reserved24;
+ u8 sata_device_wait_time;
+ u8 spinup_encl_drive_count;
+ u8 spinup_encl_delay;
+ u8 num_phys;
+ u8 pe_initial_spinup_delay;
+ u8 topology_stable_time;
+ u8 flags;
+ u8 phy[MPI3_IO_UNIT5_PHY_MAX];
+};
+
+#define MPI3_IOUNIT5_PAGEVERSION (0x00)
+#define MPI3_IOUNIT5_FLAGS_POWER_CAPABLE_SPINUP (0x02)
+#define MPI3_IOUNIT5_FLAGS_AUTO_PORT_ENABLE (0x01)
+#define MPI3_IOUNIT5_PHY_SPINUP_GROUP_MASK (0x03)
+struct _mpi3_io_unit_page6 {
+ struct _mpi3_config_page_header header;
+ __le32 board_power_requirement;
+ __le32 pci_slot_power_allocation;
+ u8 flags;
+ u8 reserved11[3];
+};
+
+#define MPI3_IOUNIT6_PAGEVERSION (0x00)
+#define MPI3_IOUNIT6_FLAGS_ACT_CABLE_PWR_EXC (0x01)
+struct _mpi3_io_unit_page7 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+};
+
+#define MPI3_IOUNIT7_PAGEVERSION (0x00)
+#ifndef MPI3_IOUNIT8_DIGEST_MAX
+#define MPI3_IOUNIT8_DIGEST_MAX (1)
+#endif
+union _mpi3_iounit8_digest {
+ __le32 dword[16];
+ __le16 word[32];
+ u8 byte[64];
+};
+
+struct _mpi3_io_unit_page8 {
+ struct _mpi3_config_page_header header;
+ u8 sb_mode;
+ u8 sb_state;
+ __le16 reserved0a;
+ u8 num_slots;
+ u8 slots_available;
+ u8 current_key_encryption_algo;
+ u8 key_digest_hash_algo;
+ __le32 reserved10[2];
+ __le32 current_key[128];
+ union _mpi3_iounit8_digest digest[MPI3_IOUNIT8_DIGEST_MAX];
+};
+
+#define MPI3_IOUNIT8_PAGEVERSION (0x00)
+#define MPI3_IOUNIT8_SBMODE_SECURE_DEBUG (0x04)
+#define MPI3_IOUNIT8_SBMODE_HARD_SECURE (0x02)
+#define MPI3_IOUNIT8_SBMODE_CONFIG_SECURE (0x01)
+#define MPI3_IOUNIT8_SBSTATE_KEY_UPDATE_PENDING (0x02)
+#define MPI3_IOUNIT8_SBSTATE_SECURE_BOOT_ENABLED (0x01)
+struct _mpi3_io_unit_page9 {
+ struct _mpi3_config_page_header header;
+ __le32 flags;
+ __le16 first_device;
+ __le16 reserved0e;
+};
+
+#define MPI3_IOUNIT9_PAGEVERSION (0x00)
+#define MPI3_IOUNIT9_FLAGS_VDFIRST_ENABLED (0x01)
+#define MPI3_IOUNIT9_FIRSTDEVICE_UNKNOWN (0xffff)
+struct _mpi3_ioc_page0 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ __le16 vendor_id;
+ __le16 device_id;
+ u8 revision_id;
+ u8 reserved11[3];
+ __le32 class_code;
+ __le16 subsystem_vendor_id;
+ __le16 subsystem_id;
+};
+
+#define MPI3_IOC0_PAGEVERSION (0x00)
+struct _mpi3_ioc_page1 {
+ struct _mpi3_config_page_header header;
+ __le32 coalescing_timeout;
+ u8 coalescing_depth;
+ u8 pci_slot_num;
+ __le16 reserved0e;
+};
+
+#define MPI3_IOC1_PAGEVERSION (0x00)
+#define MPI3_IOC1_PCISLOTNUM_UNKNOWN (0xff)
+#ifndef MPI3_IOC2_EVENTMASK_WORDS
+#define MPI3_IOC2_EVENTMASK_WORDS (4)
+#endif
+struct _mpi3_ioc_page2 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ __le16 sas_broadcast_primitive_masks;
+ __le16 sas_notify_primitive_masks;
+ __le32 event_masks[MPI3_IOC2_EVENTMASK_WORDS];
+};
+
+#define MPI3_IOC2_PAGEVERSION (0x00)
+struct _mpi3_uefibsd_page0 {
+ struct _mpi3_config_page_header header;
+ __le32 bsd_options;
+ u8 ssu_timeout;
+ u8 io_timeout;
+ u8 tur_retries;
+ u8 tur_interval;
+ u8 reserved10;
+ u8 security_key_timeout;
+ __le16 reserved12;
+ __le32 reserved14;
+ __le32 reserved18;
+};
+
+#define MPI3_UEFIBSD_PAGEVERSION (0x00)
+#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_MASK (0x00000003)
+#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_AND_DEVS (0x00000000)
+#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_ONLY (0x00000001)
+#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_NONE (0x00000002)
+#define MPI3_UEFIBSD_BSDOPTS_DIS_HII_CONFIG_UTIL (0x00000004)
+#define MPI3_UEFIBSD_BSDOPTS_EN_ADV_ADAPTER_CONFIG (0x00000008)
+union _mpi3_security_mac {
+ __le32 dword[16];
+ __le16 word[32];
+ u8 byte[64];
+};
+
+union _mpi3_security_nonce {
+ __le32 dword[16];
+ __le16 word[32];
+ u8 byte[64];
+};
+
+union _mpi3_security0_cert_chain {
+ __le32 dword[1024];
+ __le16 word[2048];
+ u8 byte[4096];
+};
+
+struct _mpi3_security_page0 {
+ struct _mpi3_config_page_header header;
+ u8 slot_num_group;
+ u8 slot_num;
+ __le16 cert_chain_length;
+ u8 cert_chain_flags;
+ u8 reserved0d[3];
+ __le32 base_asym_algo;
+ __le32 base_hash_algo;
+ __le32 reserved18[4];
+ union _mpi3_security_mac mac;
+ union _mpi3_security_nonce nonce;
+ union _mpi3_security0_cert_chain certificate_chain;
+};
+
+#define MPI3_SECURITY0_PAGEVERSION (0x00)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_MASK (0x0e)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_UNUSED (0x00)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_CERBERUS (0x02)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_SPDM (0x04)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_SEALED (0x01)
+#ifndef MPI3_SECURITY1_KEY_RECORD_MAX
+#define MPI3_SECURITY1_KEY_RECORD_MAX 1
+#endif
+#ifndef MPI3_SECURITY1_PAD_MAX
+#define MPI3_SECURITY1_PAD_MAX 1
+#endif
+union _mpi3_security1_key_data {
+ __le32 dword[128];
+ __le16 word[256];
+ u8 byte[512];
+};
+
+struct _mpi3_security1_key_record {
+ u8 flags;
+ u8 consumer;
+ __le16 key_data_size;
+ __le32 additional_key_data;
+ __le32 reserved08[2];
+ union _mpi3_security1_key_data key_data;
+};
+
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_MASK (0x1f)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_NOT_VALID (0x00)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_HMAC (0x01)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_AES (0x02)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PRIVATE (0x03)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PUBLIC (0x04)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_NOT_VALID (0x00)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_SAFESTORE (0x01)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CERT_CHAIN (0x02)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_AUTH_DEV_KEY (0x03)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CACHE_OFFLOAD (0x04)
+struct _mpi3_security_page1 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08[2];
+ union _mpi3_security_mac mac;
+ union _mpi3_security_nonce nonce;
+ u8 num_keys;
+ u8 reserved91[3];
+ __le32 reserved94[3];
+ struct _mpi3_security1_key_record key_record[MPI3_SECURITY1_KEY_RECORD_MAX];
+ u8 pad[MPI3_SECURITY1_PAD_MAX];
+};
+
+#define MPI3_SECURITY1_PAGEVERSION (0x00)
+struct _mpi3_sas_io_unit0_phy_data {
+ u8 io_unit_port;
+ u8 port_flags;
+ u8 phy_flags;
+ u8 negotiated_link_rate;
+ __le16 controller_phy_device_info;
+ __le16 reserved06;
+ __le16 attached_dev_handle;
+ __le16 controller_dev_handle;
+ __le32 discovery_status;
+ __le32 reserved10;
+};
+
+#ifndef MPI3_SAS_IO_UNIT0_PHY_MAX
+#define MPI3_SAS_IO_UNIT0_PHY_MAX (1)
+#endif
+struct _mpi3_sas_io_unit_page0 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_phys;
+ u8 reserved0d[3];
+ struct _mpi3_sas_io_unit0_phy_data phy_data[MPI3_SAS_IO_UNIT0_PHY_MAX];
+};
+
+#define MPI3_SASIOUNIT0_PAGEVERSION (0x00)
+#define MPI3_SASIOUNIT0_PORTFLAGS_DISC_IN_PROGRESS (0x08)
+#define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
+#define MPI3_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
+#define MPI3_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
+#define MPI3_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
+struct _mpi3_sas_io_unit1_phy_data {
+ u8 io_unit_port;
+ u8 port_flags;
+ u8 phy_flags;
+ u8 max_min_link_rate;
+ __le16 controller_phy_device_info;
+ __le16 max_target_port_connect_time;
+ __le32 reserved08;
+};
+
+#ifndef MPI3_SAS_IO_UNIT1_PHY_MAX
+#define MPI3_SAS_IO_UNIT1_PHY_MAX (1)
+#endif
+struct _mpi3_sas_io_unit_page1 {
+ struct _mpi3_config_page_header header;
+ __le16 control_flags;
+ __le16 sas_narrow_max_queue_depth;
+ __le16 additional_control_flags;
+ __le16 sas_wide_max_queue_depth;
+ u8 num_phys;
+ u8 sata_max_q_depth;
+ __le16 reserved12;
+ struct _mpi3_sas_io_unit1_phy_data phy_data[MPI3_SAS_IO_UNIT1_PHY_MAX];
+};
+
+#define MPI3_SASIOUNIT1_PAGEVERSION (0x00)
+#define MPI3_SASIOUNIT1_CONTROL_CONTROLLER_DEVICE_SELF_TEST (0x8000)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
+#define MPI3_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
+#define MPI3_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
+#define MPI3_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
+#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_MASK (0x0001)
+#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_DEVICE_NAME (0x0000)
+#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_SAS_ADDRESS (0x0001)
+#define MPI3_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100)
+#define MPI3_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
+#define MPI3_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
+#define MPI3_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
+#define MPI3_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
+#define MPI3_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
+#define MPI3_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
+#define MPI3_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
+#define MPI3_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
+#define MPI3_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
+#define MPI3_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
+#define MPI3_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
+#define MPI3_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_MASK (0xf0)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_SHIFT (4)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_6_0 (0xa0)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_12_0 (0xb0)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_22_5 (0xc0)
+#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_MASK (0x0f)
+#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_6_0 (0x0a)
+#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_12_0 (0x0b)
+#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_22_5 (0x0c)
+struct _mpi3_sas_io_unit2_phy_pm_settings {
+ u8 control_flags;
+ u8 reserved01;
+ __le16 inactivity_timer_exponent;
+ u8 sata_partial_timeout;
+ u8 reserved05;
+ u8 sata_slumber_timeout;
+ u8 reserved07;
+ u8 sas_partial_timeout;
+ u8 reserved09;
+ u8 sas_slumber_timeout;
+ u8 reserved0b;
+};
+
+#ifndef MPI3_SAS_IO_UNIT2_PHY_MAX
+#define MPI3_SAS_IO_UNIT2_PHY_MAX (1)
+#endif
+struct _mpi3_sas_io_unit_page2 {
+ struct _mpi3_config_page_header header;
+ u8 num_phys;
+ u8 reserved09[3];
+ __le32 reserved0c;
+ struct _mpi3_sas_io_unit2_phy_pm_settings sas_phy_power_management_settings[MPI3_SAS_IO_UNIT2_PHY_MAX];
+};
+
+#define MPI3_SASIOUNIT2_PAGEVERSION (0x00)
+#define MPI3_SASIOUNIT2_CONTROL_SAS_SLUMBER_ENABLE (0x08)
+#define MPI3_SASIOUNIT2_CONTROL_SAS_PARTIAL_ENABLE (0x04)
+#define MPI3_SASIOUNIT2_CONTROL_SATA_SLUMBER_ENABLE (0x02)
+#define MPI3_SASIOUNIT2_CONTROL_SATA_PARTIAL_ENABLE (0x01)
+#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_MASK (0x7000)
+#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_SHIFT (12)
+#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_MASK (0x0700)
+#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_SHIFT (8)
+#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_MASK (0x0070)
+#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_SHIFT (4)
+#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_MASK (0x0007)
+#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_SHIFT (0)
+#define MPI3_SASIOUNIT2_ITE_EXP_TEN_SECONDS (7)
+#define MPI3_SASIOUNIT2_ITE_EXP_ONE_SECOND (6)
+#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MILLISECONDS (5)
+#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MILLISECONDS (4)
+#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MILLISECOND (3)
+#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MICROSECONDS (2)
+#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MICROSECONDS (1)
+#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MICROSECOND (0)
+struct _mpi3_sas_io_unit_page3 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ __le32 power_management_capabilities;
+};
+
+#define MPI3_SASIOUNIT3_PAGEVERSION (0x00)
+#define MPI3_SASIOUNIT3_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
+#define MPI3_SASIOUNIT3_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
+#define MPI3_SASIOUNIT3_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
+#define MPI3_SASIOUNIT3_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
+#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
+#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
+#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
+#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
+struct _mpi3_sas_expander_page0 {
+ struct _mpi3_config_page_header header;
+ u8 io_unit_port;
+ u8 report_gen_length;
+ __le16 enclosure_handle;
+ __le32 reserved0c;
+ __le64 sas_address;
+ __le32 discovery_status;
+ __le16 dev_handle;
+ __le16 parent_dev_handle;
+ __le16 expander_change_count;
+ __le16 expander_route_indexes;
+ u8 num_phys;
+ u8 sas_level;
+ __le16 flags;
+ __le16 stp_bus_inactivity_time_limit;
+ __le16 stp_max_connect_time_limit;
+ __le16 stp_smp_nexus_loss_time;
+ __le16 max_num_routed_sas_addresses;
+ __le64 active_zone_manager_sas_address;
+ __le16 zone_lock_inactivity_limit;
+ __le16 reserved3a;
+ u8 time_to_reduced_func;
+ u8 initial_time_to_reduced_func;
+ u8 max_reduced_func_time;
+ u8 exp_status;
+};
+
+#define MPI3_SASEXPANDER0_PAGEVERSION (0x00)
+#define MPI3_SASEXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
+#define MPI3_SASEXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
+#define MPI3_SASEXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
+#define MPI3_SASEXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
+#define MPI3_SASEXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
+#define MPI3_SASEXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
+#define MPI3_SASEXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
+#define MPI3_SASEXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
+#define MPI3_SASEXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
+#define MPI3_SASEXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
+#define MPI3_SASEXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
+#define MPI3_SASEXPANDER0_ES_NOT_RESPONDING (0x02)
+#define MPI3_SASEXPANDER0_ES_RESPONDING (0x03)
+#define MPI3_SASEXPANDER0_ES_DELAY_NOT_RESPONDING (0x04)
+struct _mpi3_sas_expander_page1 {
+ struct _mpi3_config_page_header header;
+ u8 io_unit_port;
+ u8 reserved09[3];
+ u8 num_phys;
+ u8 phy;
+ __le16 num_table_entries_programmed;
+ u8 programmed_link_rate;
+ u8 hw_link_rate;
+ __le16 attached_dev_handle;
+ __le32 phy_info;
+ __le16 attached_device_info;
+ __le16 reserved1a;
+ __le16 expander_dev_handle;
+ u8 change_count;
+ u8 negotiated_link_rate;
+ u8 phy_identifier;
+ u8 attached_phy_identifier;
+ u8 reserved22;
+ u8 discovery_info;
+ __le32 attached_phy_info;
+ u8 zone_group;
+ u8 self_config_status;
+ __le16 reserved2a;
+ __le16 slot;
+ __le16 slot_index;
+};
+
+#define MPI3_SASEXPANDER1_PAGEVERSION (0x00)
+#define MPI3_SASEXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
+#define MPI3_SASEXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
+#define MPI3_SASEXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
+struct _mpi3_sas_port_page0 {
+ struct _mpi3_config_page_header header;
+ u8 port_number;
+ u8 reserved09;
+ u8 port_width;
+ u8 reserved0b;
+ u8 zone_group;
+ u8 reserved0d[3];
+ __le64 sas_address;
+ __le16 device_info;
+ __le16 reserved1a;
+ __le32 reserved1c;
+};
+
+#define MPI3_SASPORT0_PAGEVERSION (0x00)
+struct _mpi3_sas_phy_page0 {
+ struct _mpi3_config_page_header header;
+ __le16 owner_dev_handle;
+ __le16 reserved0a;
+ __le16 attached_dev_handle;
+ u8 attached_phy_identifier;
+ u8 reserved0f;
+ __le32 attached_phy_info;
+ u8 programmed_link_rate;
+ u8 hw_link_rate;
+ u8 change_count;
+ u8 flags;
+ __le32 phy_info;
+ u8 negotiated_link_rate;
+ u8 reserved1d[3];
+ __le16 slot;
+ __le16 slot_index;
+};
+
+#define MPI3_SASPHY0_PAGEVERSION (0x00)
+#define MPI3_SASPHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
+struct _mpi3_sas_phy_page1 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ __le32 invalid_dword_count;
+ __le32 running_disparity_error_count;
+ __le32 loss_dword_synch_count;
+ __le32 phy_reset_problem_count;
+};
+
+#define MPI3_SASPHY1_PAGEVERSION (0x00)
+struct _mpi3_sas_phy2_phy_event {
+ u8 phy_event_code;
+ u8 reserved01[3];
+ __le32 phy_event_info;
+};
+
+#ifndef MPI3_SAS_PHY2_PHY_EVENT_MAX
+#define MPI3_SAS_PHY2_PHY_EVENT_MAX (1)
+#endif
+struct _mpi3_sas_phy_page2 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_phy_events;
+ u8 reserved0d[3];
+ struct _mpi3_sas_phy2_phy_event phy_event[MPI3_SAS_PHY2_PHY_EVENT_MAX];
+};
+
+#define MPI3_SASPHY2_PAGEVERSION (0x00)
+struct _mpi3_sas_phy3_phy_event_config {
+ u8 phy_event_code;
+ u8 reserved01[3];
+ u8 counter_type;
+ u8 threshold_window;
+ u8 time_units;
+ u8 reserved07;
+ __le32 event_threshold;
+ __le16 threshold_flags;
+ __le16 reserved0e;
+};
+
+#define MPI3_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
+#define MPI3_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
+#define MPI3_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
+#define MPI3_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
+#define MPI3_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
+#define MPI3_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
+#define MPI3_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
+#define MPI3_SASPHY3_EVENT_CODE_INV_SPL_PACKETS (0x07)
+#define MPI3_SASPHY3_EVENT_CODE_LOSS_SPL_PACKET_SYNC (0x08)
+#define MPI3_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
+#define MPI3_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
+#define MPI3_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
+#define MPI3_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
+#define MPI3_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
+#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
+#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
+#define MPI3_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
+#define MPI3_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
+#define MPI3_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
+#define MPI3_SASPHY3_EVENT_CODE_CONNECTION (0x2a)
+#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2b)
+#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2c)
+#define MPI3_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2d)
+#define MPI3_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2e)
+#define MPI3_SASPHY3_EVENT_CODE_PERSIST_CONN (0x2f)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
+#define MPI3_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
+#define MPI3_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
+#define MPI3_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
+#define MPI3_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xd0)
+#define MPI3_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xd1)
+#define MPI3_SASPHY3_EVENT_CODE_RX_AIP (0xd2)
+#define MPI3_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xd3)
+#define MPI3_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xd4)
+#define MPI3_SASPHY3_EVENT_CODE_LCCONN_TIME (0xd5)
+#define MPI3_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xd6)
+#define MPI3_SASPHY3_EVENT_CODE_SATA_TX_START (0xd7)
+#define MPI3_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xd8)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xd9)
+#define MPI3_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xda)
+#define MPI3_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xdb)
+#define MPI3_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xdc)
+#define MPI3_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
+#define MPI3_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
+#define MPI3_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
+#define MPI3_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
+#define MPI3_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
+#define MPI3_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
+#define MPI3_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
+#define MPI3_SASPHY3_TFLAGS_PHY_RESET (0x0002)
+#define MPI3_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
+#ifndef MPI3_SAS_PHY3_PHY_EVENT_MAX
+#define MPI3_SAS_PHY3_PHY_EVENT_MAX (1)
+#endif
+struct _mpi3_sas_phy_page3 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_phy_events;
+ u8 reserved0d[3];
+ struct _mpi3_sas_phy3_phy_event_config phy_event_config[MPI3_SAS_PHY3_PHY_EVENT_MAX];
+};
+
+#define MPI3_SASPHY3_PAGEVERSION (0x00)
+struct _mpi3_sas_phy_page4 {
+ struct _mpi3_config_page_header header;
+ u8 reserved08[3];
+ u8 flags;
+ u8 initial_frame[28];
+};
+
+#define MPI3_SASPHY4_PAGEVERSION (0x00)
+#define MPI3_SASPHY4_FLAGS_FRAME_VALID (0x02)
+#define MPI3_SASPHY4_FLAGS_SATA_FRAME (0x01)
+#define MPI3_PCIE_LINK_RETIMERS_MASK (0x30)
+#define MPI3_PCIE_LINK_RETIMERS_SHIFT (4)
+#define MPI3_PCIE_NEG_LINK_RATE_MASK (0x0f)
+#define MPI3_PCIE_NEG_LINK_RATE_UNKNOWN (0x00)
+#define MPI3_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01)
+#define MPI3_PCIE_NEG_LINK_RATE_2_5 (0x02)
+#define MPI3_PCIE_NEG_LINK_RATE_5_0 (0x03)
+#define MPI3_PCIE_NEG_LINK_RATE_8_0 (0x04)
+#define MPI3_PCIE_NEG_LINK_RATE_16_0 (0x05)
+#define MPI3_PCIE_NEG_LINK_RATE_32_0 (0x06)
+struct _mpi3_pcie_io_unit0_phy_data {
+ u8 link;
+ u8 link_flags;
+ u8 phy_flags;
+ u8 negotiated_link_rate;
+ __le16 attached_dev_handle;
+ __le16 controller_dev_handle;
+ __le32 enumeration_status;
+ u8 io_unit_port;
+ u8 reserved0d[3];
+};
+
+#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_MASK (0x10)
+#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_IOUNIT1 (0x00)
+#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_BKPLANE (0x10)
+#define MPI3_PCIEIOUNIT0_LINKFLAGS_ENUM_IN_PROGRESS (0x08)
+#define MPI3_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
+#define MPI3_PCIEIOUNIT0_PHYFLAGS_HOST_PHY (0x01)
+#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCH_DEPTH_EXCEEDED (0x80000000)
+#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000)
+#define MPI3_PCIEIOUNIT0_ES_MAX_ENDPOINTS_EXCEEDED (0x20000000)
+#define MPI3_PCIEIOUNIT0_ES_INSUFFICIENT_RESOURCES (0x10000000)
+#ifndef MPI3_PCIE_IO_UNIT0_PHY_MAX
+#define MPI3_PCIE_IO_UNIT0_PHY_MAX (1)
+#endif
+struct _mpi3_pcie_io_unit_page0 {
+ struct _mpi3_config_page_header header;
+ __le32 reserved08;
+ u8 num_phys;
+ u8 init_status;
+ __le16 reserved0e;
+ struct _mpi3_pcie_io_unit0_phy_data phy_data[MPI3_PCIE_IO_UNIT0_PHY_MAX];
+};
+
+#define MPI3_PCIEIOUNIT0_PAGEVERSION (0x00)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_ERRORS (0x00)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_NEEDS_INITIALIZATION (0x01)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_TARGETS_ALLOCATED (0x02)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_RESOURCE_ALLOC_FAILED (0x03)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_NUM_PHYS (0x04)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_UNSUPPORTED_CONFIG (0x05)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_HOST_PORT_MISMATCH (0x06)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_PHYS_NOT_CONSECUTIVE (0x07)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_CLOCKING_MODE (0x08)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_START (0xf0)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_END (0xff)
+struct _mpi3_pcie_io_unit1_phy_data {
+ u8 link;
+ u8 link_flags;
+ u8 phy_flags;
+ u8 max_min_link_rate;
+ __le32 reserved04;
+ __le32 reserved08;
+};
+
+#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_MASK (0x03)
+#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_DIS_SEPARATE_REFCLK (0x00)
+#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRIS (0x01)
+#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRNS (0x02)
+#define MPI3_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_MASK (0xf0)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_SHIFT (4)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_2_5 (0x20)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_5_0 (0x30)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_8_0 (0x40)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_16_0 (0x50)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_32_0 (0x60)
+#ifndef MPI3_PCIE_IO_UNIT1_PHY_MAX
+#define MPI3_PCIE_IO_UNIT1_PHY_MAX (1)
+#endif
+struct _mpi3_pcie_io_unit_page1 {
+ struct _mpi3_config_page_header header;
+ __le32 control_flags;
+ __le32 reserved0c;
+ u8 num_phys;
+ u8 reserved11;
+ __le16 reserved12;
+ struct _mpi3_pcie_io_unit1_phy_data phy_data[MPI3_PCIE_IO_UNIT1_PHY_MAX];
+};
+
+#define MPI3_PCIEIOUNIT1_PAGEVERSION (0x00)
+struct _mpi3_pcie_io_unit_page2 {
+ struct _mpi3_config_page_header header;
+ __le16 nv_me_max_queue_depth;
+ __le16 reserved0a;
+ u8 nv_me_abort_to;
+ u8 reserved0d;
+ __le16 reserved0e;
+};
+
+#define MPI3_PCIEIOUNIT2_PAGEVERSION (0x00)
+struct _mpi3_pcie_switch_page0 {
+ struct _mpi3_config_page_header header;
+ u8 io_unit_port;
+ u8 switch_status;
+ u8 reserved0a[2];
+ __le16 dev_handle;
+ __le16 parent_dev_handle;
+ u8 num_ports;
+ u8 pc_ie_level;
+ __le16 reserved12;
+ __le32 reserved14;
+ __le32 reserved18;
+ __le32 reserved1c;
+};
+
+#define MPI3_PCIESWITCH0_PAGEVERSION (0x00)
+#define MPI3_PCIESWITCH0_SS_NOT_RESPONDING (0x02)
+#define MPI3_PCIESWITCH0_SS_RESPONDING (0x03)
+#define MPI3_PCIESWITCH0_SS_DELAY_NOT_RESPONDING (0x04)
+struct _mpi3_pcie_switch_page1 {
+ struct _mpi3_config_page_header header;
+ u8 io_unit_port;
+ u8 reserved09[3];
+ u8 num_ports;
+ u8 port_num;
+ __le16 attached_dev_handle;
+ __le16 switch_dev_handle;
+ u8 negotiated_port_width;
+ u8 negotiated_link_rate;
+ __le16 slot;
+ __le16 slot_index;
+ __le32 reserved18;
+};
+
+#define MPI3_PCIESWITCH1_PAGEVERSION (0x00)
+struct _mpi3_pcie_link_page0 {
+ struct _mpi3_config_page_header header;
+ u8 link;
+ u8 reserved09[3];
+ __le32 correctable_error_count;
+ __le16 n_fatal_error_count;
+ __le16 reserved12;
+ __le16 fatal_error_count;
+ __le16 reserved16;
+};
+
+#define MPI3_PCIELINK0_PAGEVERSION (0x00)
+struct _mpi3_enclosure_page0 {
+ struct _mpi3_config_page_header header;
+ __le64 enclosure_logical_id;
+ __le16 flags;
+ __le16 enclosure_handle;
+ __le16 num_slots;
+ __le16 start_slot;
+ u8 io_unit_port;
+ u8 enclosure_level;
+ __le16 sep_dev_handle;
+ __le32 reserved1c;
+};
+
+#define MPI3_ENCLOSURE0_PAGEVERSION (0x00)
+#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_MASK (0xc000)
+#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_VIRTUAL (0x0000)
+#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_SAS (0x4000)
+#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_PCIE (0x8000)
+#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT_MASK (0x0010)
+#define MPI3_ENCLS0_FLAGS_ENCL_DEV_NOT_FOUND (0x0000)
+#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT (0x0010)
+#define MPI3_ENCLS0_FLAGS_MNG_MASK (0x000f)
+#define MPI3_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
+#define MPI3_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
+#define MPI3_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0002)
+#define MPI3_DEVICE_DEVFORM_SAS_SATA (0x00)
+#define MPI3_DEVICE_DEVFORM_PCIE (0x01)
+#define MPI3_DEVICE_DEVFORM_VD (0x02)
+struct _mpi3_device0_sas_sata_format {
+ __le64 sas_address;
+ __le16 flags;
+ __le16 device_info;
+ u8 phy_num;
+ u8 attached_phy_identifier;
+ u8 max_port_connections;
+ u8 zone_group;
+};
+
+#define MPI3_DEVICE0_SASSATA_FLAGS_SLUMBER_CAP (0x0200)
+#define MPI3_DEVICE0_SASSATA_FLAGS_PARTIAL_CAP (0x0100)
+#define MPI3_DEVICE0_SASSATA_FLAGS_ASYNC_NOTIFY (0x0080)
+#define MPI3_DEVICE0_SASSATA_FLAGS_SW_PRESERVE (0x0040)
+#define MPI3_DEVICE0_SASSATA_FLAGS_UNSUPP_DEV (0x0020)
+#define MPI3_DEVICE0_SASSATA_FLAGS_48BIT_LBA (0x0010)
+#define MPI3_DEVICE0_SASSATA_FLAGS_SMART_SUPP (0x0008)
+#define MPI3_DEVICE0_SASSATA_FLAGS_NCQ_SUPP (0x0004)
+#define MPI3_DEVICE0_SASSATA_FLAGS_FUA_SUPP (0x0002)
+#define MPI3_DEVICE0_SASSATA_FLAGS_PERSIST_CAP (0x0001)
+struct _mpi3_device0_pcie_format {
+ u8 supported_link_rates;
+ u8 max_port_width;
+ u8 negotiated_port_width;
+ u8 negotiated_link_rate;
+ u8 port_num;
+ u8 controller_reset_to;
+ __le16 device_info;
+ __le32 maximum_data_transfer_size;
+ __le32 capabilities;
+ __le16 noiob;
+ u8 nv_me_abort_to;
+ u8 page_size;
+ __le16 shutdown_latency;
+ __le16 reserved16;
+};
+
+#define MPI3_DEVICE0_PCIE_LINK_RATE_32_0_SUPP (0x10)
+#define MPI3_DEVICE0_PCIE_LINK_RATE_16_0_SUPP (0x08)
+#define MPI3_DEVICE0_PCIE_LINK_RATE_8_0_SUPP (0x04)
+#define MPI3_DEVICE0_PCIE_LINK_RATE_5_0_SUPP (0x02)
+#define MPI3_DEVICE0_PCIE_LINK_RATE_2_5_SUPP (0x01)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK (0x0003)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NO_DEVICE (0x0000)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE (0x0001)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SWITCH_DEVICE (0x0002)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE (0x0003)
+#define MPI3_DEVICE0_PCIE_CAP_METADATA_SEPARATED (0x00000010)
+#define MPI3_DEVICE0_PCIE_CAP_SGL_DWORD_ALIGN_REQUIRED (0x00000008)
+#define MPI3_DEVICE0_PCIE_CAP_NVME_SGL_ENABLED (0x00000004)
+#define MPI3_DEVICE0_PCIE_CAP_BIT_BUCKET_SGL_SUPP (0x00000002)
+#define MPI3_DEVICE0_PCIE_CAP_SGL_SUPP (0x00000001)
+struct _mpi3_device0_vd_format {
+ u8 vd_state;
+ u8 raid_level;
+ __le16 device_info;
+ __le16 flags;
+ __le16 reserved06;
+ __le32 reserved08[2];
+};
+
+#define MPI3_DEVICE0_VD_STATE_OFFLINE (0x00)
+#define MPI3_DEVICE0_VD_STATE_PARTIALLY_DEGRADED (0x01)
+#define MPI3_DEVICE0_VD_STATE_DEGRADED (0x02)
+#define MPI3_DEVICE0_VD_STATE_OPTIMAL (0x03)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_0 (0)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_1 (1)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_5 (5)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_6 (6)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_10 (10)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_50 (50)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_60 (60)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_HDD (0x0010)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_SSD (0x0008)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_NVME (0x0004)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_SATA (0x0002)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_SAS (0x0001)
+#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_MASK (0x0003)
+#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_NONE (0x0000)
+#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_HOST (0x0001)
+#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_IOC (0x0002)
+union _mpi3_device0_dev_spec_format {
+ struct _mpi3_device0_sas_sata_format sas_sata_format;
+ struct _mpi3_device0_pcie_format pcie_format;
+ struct _mpi3_device0_vd_format vd_format;
+};
+
+struct _mpi3_device_page0 {
+ struct _mpi3_config_page_header header;
+ __le16 dev_handle;
+ __le16 parent_dev_handle;
+ __le16 slot;
+ __le16 enclosure_handle;
+ __le64 wwid;
+ __le16 persistent_id;
+ u8 io_unit_port;
+ u8 access_status;
+ __le16 flags;
+ __le16 reserved1e;
+ __le16 slot_index;
+ __le16 queue_depth;
+ u8 reserved24[3];
+ u8 device_form;
+ union _mpi3_device0_dev_spec_format device_specific;
+};
+
+#define MPI3_DEVICE0_PAGEVERSION (0x00)
+#define MPI3_DEVICE0_WWID_INVALID (0xffffffffffffffff)
+#define MPI3_DEVICE0_PERSISTENTID_INVALID (0xffff)
+#define MPI3_DEVICE0_IOUNITPORT_INVALID (0xff)
+#define MPI3_DEVICE0_ASTATUS_NO_ERRORS (0x00)
+#define MPI3_DEVICE0_ASTATUS_NEEDS_INITIALIZATION (0x01)
+#define MPI3_DEVICE0_ASTATUS_CAP_UNSUPPORTED (0x02)
+#define MPI3_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x03)
+#define MPI3_DEVICE0_ASTATUS_UNAUTHORIZED (0x04)
+#define MPI3_DEVICE0_ASTATUS_DEVICE_MISSING_DELAY (0x05)
+#define MPI3_DEVICE0_ASTATUS_SAS_UNKNOWN (0x10)
+#define MPI3_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x11)
+#define MPI3_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x12)
+#define MPI3_DEVICE0_ASTATUS_SIF_UNKNOWN (0x20)
+#define MPI3_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x21)
+#define MPI3_DEVICE0_ASTATUS_SIF_DIAG (0x22)
+#define MPI3_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x23)
+#define MPI3_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x24)
+#define MPI3_DEVICE0_ASTATUS_SIF_PIO_SN (0x25)
+#define MPI3_DEVICE0_ASTATUS_SIF_MDMA_SN (0x26)
+#define MPI3_DEVICE0_ASTATUS_SIF_UDMA_SN (0x27)
+#define MPI3_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x28)
+#define MPI3_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x29)
+#define MPI3_DEVICE0_ASTATUS_SIF_MAX (0x2f)
+#define MPI3_DEVICE0_ASTATUS_PCIE_UNKNOWN (0x30)
+#define MPI3_DEVICE0_ASTATUS_PCIE_MEM_SPACE_ACCESS (0x31)
+#define MPI3_DEVICE0_ASTATUS_PCIE_UNSUPPORTED (0x32)
+#define MPI3_DEVICE0_ASTATUS_PCIE_MSIX_REQUIRED (0x33)
+#define MPI3_DEVICE0_ASTATUS_NVME_UNKNOWN (0x40)
+#define MPI3_DEVICE0_ASTATUS_NVME_READY_TIMEOUT (0x41)
+#define MPI3_DEVICE0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x42)
+#define MPI3_DEVICE0_ASTATUS_NVME_IDENTIFY_FAILED (0x43)
+#define MPI3_DEVICE0_ASTATUS_NVME_QCONFIG_FAILED (0x44)
+#define MPI3_DEVICE0_ASTATUS_NVME_QCREATION_FAILED (0x45)
+#define MPI3_DEVICE0_ASTATUS_NVME_EVENTCFG_FAILED (0x46)
+#define MPI3_DEVICE0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x47)
+#define MPI3_DEVICE0_ASTATUS_NVME_IDLE_TIMEOUT (0x48)
+#define MPI3_DEVICE0_ASTATUS_NVME_CTRL_FAILURE_STATUS (0x49)
+#define MPI3_DEVICE0_ASTATUS_VD_UNKNOWN (0x50)
+#define MPI3_DEVICE0_FLAGS_CONTROLLER_DEV_HANDLE (0x0080)
+#define MPI3_DEVICE0_FLAGS_HIDDEN (0x0008)
+#define MPI3_DEVICE0_FLAGS_ATT_METHOD_MASK (0x0006)
+#define MPI3_DEVICE0_FLAGS_ATT_METHOD_NOT_DIR_ATTACHED (0x0000)
+#define MPI3_DEVICE0_FLAGS_ATT_METHOD_DIR_ATTACHED (0x0002)
+#define MPI3_DEVICE0_FLAGS_ATT_METHOD_VIRTUAL (0x0004)
+#define MPI3_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
+#define MPI3_DEVICE0_QUEUE_DEPTH_NOT_APPLICABLE (0x0000)
+struct _mpi3_device1_sas_sata_format {
+ __le32 reserved00;
+};
+
+struct _mpi3_device1_pcie_format {
+ __le16 vendor_id;
+ __le16 device_id;
+ __le16 subsystem_vendor_id;
+ __le16 subsystem_id;
+ __le32 reserved08;
+ u8 revision_id;
+ u8 reserved0d;
+ __le16 pci_parameters;
+};
+
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_128B (0x0)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_256B (0x1)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_512B (0x2)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_1024B (0x3)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_2048B (0x4)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_4096B (0x5)
+#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_MASK (0x01c0)
+#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_SHIFT (6)
+#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_MASK (0x0038)
+#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_SHIFT (3)
+#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_MASK (0x0007)
+#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_SHIFT (0)
+struct _mpi3_device1_vd_format {
+ __le32 reserved00;
+};
+
+union _mpi3_device1_dev_spec_format {
+ struct _mpi3_device1_sas_sata_format sas_sata_format;
+ struct _mpi3_device1_pcie_format pcie_format;
+ struct _mpi3_device1_vd_format vd_format;
+};
+
+struct _mpi3_device_page1 {
+ struct _mpi3_config_page_header header;
+ __le16 dev_handle;
+ __le16 reserved0a;
+ __le32 reserved0c[12];
+ u8 reserved3c[3];
+ u8 device_form;
+ union _mpi3_device1_dev_spec_format device_specific;
+};
+
+#define MPI3_DEVICE1_PAGEVERSION (0x00)
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_sas.h b/drivers/scsi/mpi3mr/mpi/mpi30_sas.h
new file mode 100644
index 000000000000..462902bc681a
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_sas.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_sas.h
+ * Description: Contains MPI Serial Attached SCSI structures and definitions
+ * Creation Date: 12/08/2016
+ * Version: 03.00.00
+ */
+#ifndef MPI30_SAS_H
+#define MPI30_SAS_H 1
+#define MPI3_SAS_DEVICE_INFO_SSP_TARGET (0x00000100)
+#define MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET (0x00000080)
+#define MPI3_SAS_DEVICE_INFO_SMP_TARGET (0x00000040)
+#define MPI3_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000020)
+#define MPI3_SAS_DEVICE_INFO_STP_INITIATOR (0x00000010)
+#define MPI3_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000008)
+#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK (0x00000007)
+#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_NO_DEVICE (0x00000000)
+#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE (0x00000001)
+#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_EXPANDER (0x00000002)
+struct _mpi3_smp_passthrough_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 reserved0a;
+ u8 io_unit_port;
+ __le32 reserved0c[3];
+ __le64 sas_address;
+ struct _mpi3_sge_common request_sge;
+ struct _mpi3_sge_common response_sge;
+};
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 0ff2b3b1947b..9c6415f736c4 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -134,6 +134,10 @@ extern struct list_head mrioc_list;
#define MPI3MR_RSP_IO_QUEUED_ON_IOC \
MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC
+#define MPI3MR_DEFAULT_MDTS (128 * 1024)
+/* Command retry count definitions */
+#define MPI3MR_DEV_RMHS_RETRY_COUNT 3
+
/* SGE Flag definition */
#define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
@@ -313,6 +317,126 @@ struct mpi3mr_intr_info {
char name[MPI3MR_NAME_LENGTH];
};
+/**
+ * struct tgt_dev_sas_sata - SAS/SATA device specific
+ * information cached from firmware given data
+ *
+ * @sas_address: World wide unique SAS address
+ * @dev_info: Device information bits
+ */
+struct tgt_dev_sas_sata {
+ u64 sas_address;
+ u16 dev_info;
+};
+
+/**
+ * struct tgt_dev_pcie - PCIe device specific information cached
+ * from firmware given data
+ *
+ * @mdts: Maximum data transfer size
+ * @capb: Device capabilities
+ * @pgsz: Device page size
+ * @abort_to: Timeout for abort TM
+ * @reset_to: Timeout for Target/LUN reset TM
+ */
+struct tgt_dev_pcie {
+ u32 mdts;
+ u16 capb;
+ u8 pgsz;
+ u8 abort_to;
+ u8 reset_to;
+};
+
+/**
+ * struct tgt_dev_volume - virtual device specific information
+ * cached from firmware given data
+ *
+ * @state: State of the VD
+ */
+struct tgt_dev_volume {
+ u8 state;
+};
+
+/**
+ * union _form_spec_inf - union of device specific information
+ */
+union _form_spec_inf {
+ struct tgt_dev_sas_sata sas_sata_inf;
+ struct tgt_dev_pcie pcie_inf;
+ struct tgt_dev_volume vol_inf;
+};
+
+
+
+/**
+ * struct mpi3mr_tgt_dev - target device data structure
+ *
+ * @list: List pointer
+ * @starget: Scsi_target pointer
+ * @dev_handle: FW device handle
+ * @parent_handle: FW parent device handle
+ * @slot: Slot number
+ * @encl_handle: FW enclosure handle
+ * @perst_id: FW assigned Persistent ID
+ * @dev_type: SAS/SATA/PCIE device type
+ * @is_hidden: Should be exposed to upper layers or not
+ * @host_exposed: Already exposed to host or not
+ * @q_depth: Device specific Queue Depth
+ * @wwid: World wide ID
+ * @dev_spec: Device type specific information
+ * @ref_count: Reference count
+ */
+struct mpi3mr_tgt_dev {
+ struct list_head list;
+ struct scsi_target *starget;
+ u16 dev_handle;
+ u16 parent_handle;
+ u16 slot;
+ u16 encl_handle;
+ u16 perst_id;
+ u8 dev_type;
+ u8 is_hidden;
+ u8 host_exposed;
+ u16 q_depth;
+ u64 wwid;
+ union _form_spec_inf dev_spec;
+ struct kref ref_count;
+};
+
+/**
+ * mpi3mr_tgtdev_get - k reference incrementor
+ * @s: Target device reference
+ *
+ * Increment target device reference count.
+ */
+static inline void mpi3mr_tgtdev_get(struct mpi3mr_tgt_dev *s)
+{
+ kref_get(&s->ref_count);
+}
+
+/**
+ * mpi3mr_free_tgtdev - target device memory dealloctor
+ * @r: k reference pointer of the target device
+ *
+ * Free target device memory when no reference.
+ */
+static inline void mpi3mr_free_tgtdev(struct kref *r)
+{
+ kfree(container_of(r, struct mpi3mr_tgt_dev, ref_count));
+}
+
+/**
+ * mpi3mr_tgtdev_put - k reference decrementor
+ * @s: Target device reference
+ *
+ * Decrement target device reference count.
+ */
+static inline void mpi3mr_tgtdev_put(struct mpi3mr_tgt_dev *s)
+{
+ kref_put(&s->ref_count, mpi3mr_free_tgtdev);
+}
+
+
/**
* struct mpi3mr_stgt_priv_data - SCSI target private structure
*
@@ -358,6 +482,7 @@ struct mpi3mr_sdev_priv_data {
* @done: Completeor for wakeup
* @reply: Firmware reply for internal commands
* @sensebuf: Sensebuf for SCSI IO commands
+ * @iou_rc: IO Unit control reason code
* @state: Command State
* @dev_handle: Firmware handle for device specific commands
* @ioc_status: IOC status from the firmware
@@ -372,6 +497,7 @@ struct mpi3mr_drv_cmd {
struct completion done;
void *reply;
u8 *sensebuf;
+ u8 iou_rc;
u16 state;
u16 dev_handle;
u16 ioc_status;
@@ -478,6 +604,11 @@ struct scmd_priv {
* @sense_buf_q_dma: Sense buffer queue DMA address
* @sbq_lock: Sense buffer queue lock
* @sbq_host_index: Sense buffer queuehost index
+ * @event_masks: Event mask bitmap
+ * @fwevt_worker_name: Firmware event worker thread name
+ * @fwevt_worker_thread: Firmware event worker thread
+ * @fwevt_lock: Firmware event lock
+ * @fwevt_list: Firmware event list
* @watchdog_work_q_name: Fault watchdog worker thread name
* @watchdog_work_q: Fault watchdog worker thread
* @watchdog_work: Fault watchdog work
@@ -493,6 +624,12 @@ struct scmd_priv {
* @chain_bitmap_sz: Chain buffer allocator bitmap size
* @chain_bitmap: Chain buffer allocator bitmap
* @chain_buf_lock: Chain buffer list lock
+ * @dev_rmhs_cmds: Command tracker for device removal commands
+ * @devrem_bitmap_sz: Device removal bitmap size
+ * @devrem_bitmap: Device removal bitmap
+ * @dev_handle_bitmap_sz: Device handle bitmap size
+ * @removepend_bitmap: Remove pending bitmap
+ * @delayed_rmhs_list: Delayed device removal list
* @reset_in_progress: Reset in progress flag
* @unrecoverable: Controller unrecoverable flag
* @diagsave_timeout: Diagnostic information save timeout
@@ -576,6 +713,12 @@ struct mpi3mr_ioc {
dma_addr_t sense_buf_q_dma;
spinlock_t sbq_lock;
u32 sbq_host_index;
+ u32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS];
+
+ char fwevt_worker_name[MPI3MR_NAME_LENGTH];
+ struct workqueue_struct *fwevt_worker_thread;
+ spinlock_t fwevt_lock;
+ struct list_head fwevt_list;
char watchdog_work_q_name[20];
struct workqueue_struct *watchdog_work_q;
@@ -588,6 +731,8 @@ struct mpi3mr_ioc {
u8 stop_drv_processing;
u16 max_host_ios;
+ spinlock_t tgtdev_lock;
+ struct list_head tgtdev_list;
u32 chain_buf_count;
struct dma_pool *chain_buf_pool;
@@ -596,6 +741,13 @@ struct mpi3mr_ioc {
void *chain_bitmap;
spinlock_t chain_buf_lock;
+ struct mpi3mr_drv_cmd dev_rmhs_cmds[MPI3MR_NUM_DEVRMCMD];
+ u16 devrem_bitmap_sz;
+ void *devrem_bitmap;
+ u16 dev_handle_bitmap_sz;
+ void *removepend_bitmap;
+ struct list_head delayed_rmhs_list;
+
u8 reset_in_progress;
u8 unrecoverable;
@@ -608,6 +760,45 @@ struct mpi3mr_ioc {
u16 op_reply_q_offset;
};
+/**
+ * struct mpi3mr_fwevt - Firmware event structure.
+ *
+ * @list: list head
+ * @work: Work structure
+ * @mrioc: Adapter instance reference
+ * @event_id: MPI3 firmware event ID
+ * @send_ack: Event acknowledgment required or not
+ * @process_evt: Bottomhalf processing required or not
+ * @evt_ctx: Event context to send in Ack
+ * @ref_count: kref count
+ * @event_data: Actual MPI3 event data
+ */
+struct mpi3mr_fwevt {
+ struct list_head list;
+ struct work_struct work;
+ struct mpi3mr_ioc *mrioc;
+ u16 event_id;
+ bool send_ack;
+ bool process_evt;
+ u32 evt_ctx;
+ struct kref ref_count;
+ char event_data[0] __aligned(4);
+};
+
+
+/**
+ * struct delayed_dev_rmhs_node - Delayed device removal node
+ *
+ * @list: list head
+ * @handle: Device handle
+ * @iou_rc: IO Unit Control Reason Code
+ */
+struct delayed_dev_rmhs_node {
+ struct list_head list;
+ u16 handle;
+ u8 iou_rc;
+};
+
int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc);
int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc);
@@ -627,6 +818,8 @@ void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc,
void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
u64 sense_buf_dma);
+void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_notification_reply *event_reply);
void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
struct _mpi3_default_reply_descriptor *reply_desc,
u64 *reply_dma, u16 qidx);
@@ -639,5 +832,14 @@ void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc);
void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc);
enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc);
+int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event,
+ u32 event_ctx);
+
+void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout);
+void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc);
+void mpi3mr_flush_host_io(struct mpi3mr_ioc *mrioc);
+void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc);
+void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc);
+void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc);
#endif /*MPI3MR_H_INCLUDED*/
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 9a750f630d5e..a5e8c7c87314 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -160,12 +160,15 @@ static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc,
(struct _mpi3_event_notification_reply *)def_reply;
mrioc->change_count = le16_to_cpu(event_reply->ioc_change_count);
+ mpi3mr_os_handle_events(mrioc, event_reply);
}
static struct mpi3mr_drv_cmd *
mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag,
struct _mpi3_default_reply *def_reply)
{
+ u16 idx;
+
switch (host_tag) {
case MPI3MR_HOSTTAG_INITCMDS:
return &mrioc->init_cmds;
@@ -177,6 +180,11 @@ mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag,
default:
break;
}
+ if (host_tag >= MPI3MR_HOSTTAG_DEVRMCMD_MIN &&
+ host_tag <= MPI3MR_HOSTTAG_DEVRMCMD_MAX) {
+ idx = host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN;
+ return &mrioc->dev_rmhs_cmds[idx];
+ }
return NULL;
}
@@ -1910,6 +1918,13 @@ static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc)
if (!mrioc->init_cmds.reply)
goto out_failed;
+ for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) {
+ mrioc->dev_rmhs_cmds[i].reply = kzalloc(mrioc->facts.reply_sz,
+ GFP_KERNEL);
+ if (!mrioc->dev_rmhs_cmds[i].reply)
+ goto out_failed;
+ }
+
mrioc->num_reply_bufs = mrioc->facts.max_reqs + MPI3MR_NUM_EVT_REPLIES;
mrioc->reply_free_qsz = mrioc->num_reply_bufs + 1;
mrioc->num_sense_bufs = mrioc->facts.max_reqs / MPI3MR_SENSEBUF_FACTOR;
@@ -2119,6 +2134,163 @@ static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc)
return retval;
}
+/**
+ * mpi3mr_unmask_events - Unmask events in event mask bitmap
+ * @mrioc: Adapter instance reference
+ * @event: MPI event ID
+ *
+ * Un mask the specific event by resetting the event_mask
+ * bitmap.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static void mpi3mr_unmask_events(struct mpi3mr_ioc *mrioc, u16 event)
+{
+ u32 desired_event;
+ u8 word;
+
+ if (event >= 128)
+ return;
+
+ desired_event = (1 << (event % 32));
+ word = event / 32;
+
+ mrioc->event_masks[word] &= ~desired_event;
+}
+
+/**
+ * mpi3mr_issue_event_notification - Send event notification
+ * @mrioc: Adapter instance reference
+ *
+ * Issue event notification MPI request through admin queue and
+ * wait for the completion of it or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_issue_event_notification(struct mpi3mr_ioc *mrioc)
+{
+ struct _mpi3_event_notification_request evtnotify_req;
+ int retval = 0;
+ u8 i;
+
+ memset(&evtnotify_req, 0, sizeof(evtnotify_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "Issue EvtNotify: Init command is in use\n");
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ evtnotify_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ evtnotify_req.function = MPI3_FUNCTION_EVENT_NOTIFICATION;
+ for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+ evtnotify_req.event_masks[i] =
+ cpu_to_le32(mrioc->event_masks[i]);
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &evtnotify_req,
+ sizeof(evtnotify_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "Issue EvtNotify: Admin Post failed\n");
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "Issue EvtNotify: command timed out\n");
+ mpi3mr_set_diagsave(mrioc);
+ mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+ MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT);
+ mrioc->unrecoverable = 1;
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "Issue EvtNotify: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+ return retval;
+}
+
+/**
+ * mpi3mr_send_event_ack - Send event acknowledgment
+ * @mrioc: Adapter instance reference
+ * @event: MPI3 event ID
+ * @event_ctx: Event context
+ *
+ * Send event acknowledgment through admin queue and wait for
+ * it to complete.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event,
+ u32 event_ctx)
+{
+ struct _mpi3_event_ack_request evtack_req;
+ int retval = 0;
+
+ memset(&evtack_req, 0, sizeof(evtack_req));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "Send EvtAck: Init command is in use\n");
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ evtack_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ evtack_req.function = MPI3_FUNCTION_EVENT_ACK;
+ evtack_req.event = event;
+ evtack_req.event_context = cpu_to_le32(event_ctx);
+
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &evtack_req,
+ sizeof(evtack_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "Send EvtAck: Admin Post failed\n");
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "Issue EvtNotify: command timed out\n");
+ mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_EVTACK_TIMEOUT, 1);
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "Send EvtAck: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+ return retval;
+}
+
/**
* mpi3mr_alloc_chain_bufs - Allocate chain buffers
* @mrioc: Adapter instance reference
@@ -2396,7 +2568,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
enum mpi3mr_iocstate ioc_state;
u64 base_info;
u32 timeout;
- u32 ioc_status, ioc_config;
+ u32 ioc_status, ioc_config, i;
struct _mpi3_ioc_facts_data facts_data;
mrioc->change_count = 0;
@@ -2546,6 +2718,24 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
goto out_failed;
}
+ for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+ mrioc->event_masks[i] = -1;
+
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_ADDED);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_INFO_CHANGED);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_STATUS_CHANGE);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR);
+
+ retval = mpi3mr_issue_event_notification(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to issue event notification %d\n",
+ retval);
+ goto out_failed;
+ }
+
return retval;
out_failed:
@@ -2627,6 +2817,11 @@ static void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
kfree(mrioc->chain_bitmap);
mrioc->chain_bitmap = NULL;
+ for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) {
+ kfree(mrioc->dev_rmhs_cmds[i].reply);
+ mrioc->dev_rmhs_cmds[i].reply = NULL;
+ }
+
if (mrioc->chain_buf_pool) {
for (i = 0; i < mrioc->chain_buf_count; i++) {
if (mrioc->chain_sgl_list[i].addr) {
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 1587c8b029ad..1b372baec295 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -125,6 +125,1268 @@ static void mpi3mr_clear_scmd_priv(struct mpi3mr_ioc *mrioc,
}
}
+static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle,
+ struct mpi3mr_drv_cmd *cmdparam, u8 iou_rc);
+static void mpi3mr_fwevt_worker(struct work_struct *work);
+
+/**
+ * mpi3mr_fwevt_free - firmware event memory dealloctor
+ * @r: k reference pointer of the firmware event
+ *
+ * Free firmware event memory when no reference.
+ */
+static void mpi3mr_fwevt_free(struct kref *r)
+{
+ kfree(container_of(r, struct mpi3mr_fwevt, ref_count));
+}
+
+/**
+ * mpi3mr_fwevt_get - k reference incrementor
+ * @fwevt: Firmware event reference
+ *
+ * Increment firmware event reference count.
+ */
+static void mpi3mr_fwevt_get(struct mpi3mr_fwevt *fwevt)
+{
+ kref_get(&fwevt->ref_count);
+}
+
+/**
+ * mpi3mr_fwevt_put - k reference decrementor
+ * @fwevt: Firmware event reference
+ *
+ * decrement firmware event reference count.
+ */
+static void mpi3mr_fwevt_put(struct mpi3mr_fwevt *fwevt)
+{
+ kref_put(&fwevt->ref_count, mpi3mr_fwevt_free);
+}
+
+/**
+ * mpi3mr_alloc_fwevt - Allocate firmware event
+ * @len: length of firmware event data to allocate
+ *
+ * Allocate firmware event with required length and initialize
+ * the reference counter.
+ *
+ * Return: firmware event reference.
+ */
+static struct mpi3mr_fwevt *mpi3mr_alloc_fwevt(int len)
+{
+ struct mpi3mr_fwevt *fwevt;
+
+ fwevt = kzalloc(sizeof(*fwevt) + len, GFP_ATOMIC);
+ if (!fwevt)
+ return NULL;
+
+ kref_init(&fwevt->ref_count);
+ return fwevt;
+}
+
+/**
+ * mpi3mr_fwevt_add_to_list - Add firmware event to the list
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Add the given firmware event to the firmware event list.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_fwevt_add_to_list(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_fwevt *fwevt)
+{
+ unsigned long flags;
+
+ if (!mrioc->fwevt_worker_thread)
+ return;
+
+ spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+ /* get fwevt reference count while adding it to fwevt_list */
+ mpi3mr_fwevt_get(fwevt);
+ INIT_LIST_HEAD(&fwevt->list);
+ list_add_tail(&fwevt->list, &mrioc->fwevt_list);
+ INIT_WORK(&fwevt->work, mpi3mr_fwevt_worker);
+ /* get fwevt reference count while enqueueing it to worker queue */
+ mpi3mr_fwevt_get(fwevt);
+ queue_work(mrioc->fwevt_worker_thread, &fwevt->work);
+ spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+}
+
+/**
+ * mpi3mr_fwevt_del_from_list - Delete firmware event from list
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Delete the given firmware event from the firmware event list.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_fwevt_del_from_list(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_fwevt *fwevt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+ if (!list_empty(&fwevt->list)) {
+ list_del_init(&fwevt->list);
+ /*
+ * Put fwevt reference count after
+ * removing it from fwevt_list
+ */
+ mpi3mr_fwevt_put(fwevt);
+ }
+ spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+}
+
+/**
+ * mpi3mr_dequeue_fwevt - Dequeue firmware event from the list
+ * @mrioc: Adapter instance reference
+ *
+ * Dequeue a firmware event from the firmware event list.
+ *
+ * Return: firmware event.
+ */
+static struct mpi3mr_fwevt *mpi3mr_dequeue_fwevt(
+ struct mpi3mr_ioc *mrioc)
+{
+ unsigned long flags;
+ struct mpi3mr_fwevt *fwevt = NULL;
+
+ spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+ if (!list_empty(&mrioc->fwevt_list)) {
+ fwevt = list_first_entry(&mrioc->fwevt_list,
+ struct mpi3mr_fwevt, list);
+ list_del_init(&fwevt->list);
+ /*
+ * Put fwevt reference count after
+ * removing it from fwevt_list
+ */
+ mpi3mr_fwevt_put(fwevt);
+ }
+ spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+
+ return fwevt;
+}
+
+/**
+ * mpi3mr_cleanup_fwevt_list - Cleanup firmware event list
+ * @mrioc: Adapter instance reference
+ *
+ * Flush all pending firmware events from the firmware event
+ * list.
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc)
+{
+ struct mpi3mr_fwevt *fwevt = NULL;
+
+ if ((list_empty(&mrioc->fwevt_list) && !mrioc->current_event) ||
+ !mrioc->fwevt_worker_thread)
+ return;
+
+ while ((fwevt = mpi3mr_dequeue_fwevt(mrioc)) ||
+ (fwevt = mrioc->current_event)) {
+ /*
+ * Wait on the fwevt to complete. If this returns 1, then
+ * the event was never executed, and we need a put for the
+ * reference the work had on the fwevt.
+ *
+ * If it did execute, we wait for it to finish, and the put will
+ * happen from mpi3mr_process_fwevt()
+ */
+ if (cancel_work_sync(&fwevt->work)) {
+ /*
+ * Put fwevt reference count after
+ * dequeuing it from worker queue
+ */
+ mpi3mr_fwevt_put(fwevt);
+ /*
+ * Put fwevt reference count to neutralize
+ * kref_init increment
+ */
+ mpi3mr_fwevt_put(fwevt);
+ }
+ }
+}
+
+/**
+ * mpi3mr_alloc_tgtdev - target device allocator
+ *
+ * Allocate target device instance and initialize the reference
+ * count
+ *
+ * Return: target device instance.
+ */
+static struct mpi3mr_tgt_dev *mpi3mr_alloc_tgtdev(void)
+{
+ struct mpi3mr_tgt_dev *tgtdev;
+
+ tgtdev = kzalloc(sizeof(*tgtdev), GFP_ATOMIC);
+ if (!tgtdev)
+ return NULL;
+ kref_init(&tgtdev->ref_count);
+ return tgtdev;
+}
+
+/**
+ * mpi3mr_tgtdev_add_to_list -Add tgtdevice to the list
+ * @mrioc: Adapter instance reference
+ * @tgtdev: Target device
+ *
+ * Add the target device to the target device list
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_tgtdev_add_to_list(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_tgt_dev *tgtdev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ mpi3mr_tgtdev_get(tgtdev);
+ INIT_LIST_HEAD(&tgtdev->list);
+ list_add_tail(&tgtdev->list, &mrioc->tgtdev_list);
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+}
+
+/**
+ * mpi3mr_tgtdev_del_from_list -Delete tgtdevice from the list
+ * @mrioc: Adapter instance reference
+ * @tgtdev: Target device
+ *
+ * Remove the target device from the target device list
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_tgtdev_del_from_list(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_tgt_dev *tgtdev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ if (!list_empty(&tgtdev->list)) {
+ list_del_init(&tgtdev->list);
+ mpi3mr_tgtdev_put(tgtdev);
+ }
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+}
+
+/**
+ * __mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle
+ * @mrioc: Adapter instance reference
+ * @handle: Device handle
+ *
+ * Accessor to retrieve target device from the device handle.
+ * Non Lock version
+ *
+ * Return: Target device reference.
+ */
+static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_handle(
+ struct mpi3mr_ioc *mrioc, u16 handle)
+{
+ struct mpi3mr_tgt_dev *tgtdev;
+
+ assert_spin_locked(&mrioc->tgtdev_lock);
+ list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list)
+ if (tgtdev->dev_handle == handle)
+ goto found_tgtdev;
+ return NULL;
+
+found_tgtdev:
+ mpi3mr_tgtdev_get(tgtdev);
+ return tgtdev;
+}
+
+/**
+ * mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle
+ * @mrioc: Adapter instance reference
+ * @handle: Device handle
+ *
+ * Accessor to retrieve target device from the device handle.
+ * Lock version
+ *
+ * Return: Target device reference.
+ */
+static struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle(
+ struct mpi3mr_ioc *mrioc, u16 handle)
+{
+ struct mpi3mr_tgt_dev *tgtdev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ tgtdev = __mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+ return tgtdev;
+}
+
+/**
+ * __mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persist ID
+ * @mrioc: Adapter instance reference
+ * @persist_id: Persistent ID
+ *
+ * Accessor to retrieve target device from the Persistent ID.
+ * Non Lock version
+ *
+ * Return: Target device reference.
+ */
+static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_perst_id(
+ struct mpi3mr_ioc *mrioc, u16 persist_id)
+{
+ struct mpi3mr_tgt_dev *tgtdev;
+
+ assert_spin_locked(&mrioc->tgtdev_lock);
+ list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list)
+ if (tgtdev->perst_id == persist_id)
+ goto found_tgtdev;
+ return NULL;
+
+found_tgtdev:
+ mpi3mr_tgtdev_get(tgtdev);
+ return tgtdev;
+}
+
+/**
+ * mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persistent ID
+ * @mrioc: Adapter instance reference
+ * @persist_id: Persistent ID
+ *
+ * Accessor to retrieve target device from the Persistent ID.
+ * Lock version
+ *
+ * Return: Target device reference.
+ */
+static struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_perst_id(
+ struct mpi3mr_ioc *mrioc, u16 persist_id)
+{
+ struct mpi3mr_tgt_dev *tgtdev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ tgtdev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, persist_id);
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+ return tgtdev;
+}
+
+/**
+ * __mpi3mr_get_tgtdev_from_tgtpriv -Get tgtdev from tgt private
+ * @mrioc: Adapter instance reference
+ * @tgt_priv: Target private data
+ *
+ * Accessor to return target device from the target private
+ * data. Non Lock version
+ *
+ * Return: Target device reference.
+ */
+static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_from_tgtpriv(
+ struct mpi3mr_ioc *mrioc, struct mpi3mr_stgt_priv_data *tgt_priv)
+{
+ struct mpi3mr_tgt_dev *tgtdev;
+
+ assert_spin_locked(&mrioc->tgtdev_lock);
+ tgtdev = tgt_priv->tgt_dev;
+ if (tgtdev)
+ mpi3mr_tgtdev_get(tgtdev);
+ return tgtdev;
+}
+
+/**
+ * mpi3mr_remove_tgtdev_from_host - Remove dev from upper layers
+ * @mrioc: Adapter instance reference
+ * @tgtdev: Target device structure
+ *
+ * Checks whether the device is exposed to upper layers and if it
+ * is then remove the device from upper layers by calling
+ * scsi_remove_target().
+ *
+ * Return: 0 on success, non zero on failure.
+ */
+static void mpi3mr_remove_tgtdev_from_host(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_tgt_dev *tgtdev)
+{
+ struct mpi3mr_stgt_priv_data *tgt_priv;
+
+ ioc_info(mrioc, "%s :Removing handle(0x%04x), wwid(0x%016llx)\n",
+ __func__, tgtdev->dev_handle, (unsigned long long)tgtdev->wwid);
+ if (tgtdev->starget && tgtdev->starget->hostdata) {
+ tgt_priv = tgtdev->starget->hostdata;
+ tgt_priv->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+ }
+
+ if (tgtdev->starget) {
+ scsi_remove_target(&tgtdev->starget->dev);
+ tgtdev->host_exposed = 0;
+ }
+ ioc_info(mrioc, "%s :Removed handle(0x%04x), wwid(0x%016llx)\n",
+ __func__, tgtdev->dev_handle, (unsigned long long)tgtdev->wwid);
+}
+
+/**
+ * mpi3mr_report_tgtdev_to_host - Expose device to upper layers
+ * @mrioc: Adapter instance reference
+ * @perst_id: Persistent ID of the device
+ *
+ * Checks whether the device can be exposed to upper layers and
+ * if it is not then expose the device to upper layers by
+ * calling scsi_scan_target().
+ *
+ * Return: 0 on success, non zero on failure.
+ */
+static int mpi3mr_report_tgtdev_to_host(struct mpi3mr_ioc *mrioc,
+ u16 perst_id)
+{
+ int retval = 0;
+ struct mpi3mr_tgt_dev *tgtdev;
+
+ tgtdev = mpi3mr_get_tgtdev_by_perst_id(mrioc, perst_id);
+ if (!tgtdev) {
+ retval = -1;
+ goto out;
+ }
+ if (tgtdev->is_hidden) {
+ retval = -1;
+ goto out;
+ }
+ if (!tgtdev->host_exposed && !mrioc->reset_in_progress) {
+ tgtdev->host_exposed = 1;
+ scsi_scan_target(&mrioc->shost->shost_gendev, 0,
+ tgtdev->perst_id,
+ SCAN_WILD_CARD, SCSI_SCAN_INITIAL);
+ if (!tgtdev->starget)
+ tgtdev->host_exposed = 0;
+ }
+out:
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+
+ return retval;
+}
+
+/**
+ * mpi3mr_rfresh_tgtdevs - Refresh target device exposure
+ * @mrioc: Adapter instance reference
+ *
+ * This is executed post controller reset to identify any
+ * missing devices during reset and remove from the upper layers
+ * or expose any newly detected device to the upper layers.
+ *
+ * Return: Nothing.
+ */
+
+void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc)
+{
+ struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next;
+
+ list_for_each_entry_safe(tgtdev, tgtdev_next, &mrioc->tgtdev_list,
+ list) {
+ if ((tgtdev->dev_handle == MPI3MR_INVALID_DEV_HANDLE) &&
+ tgtdev->host_exposed) {
+ mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+ mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+ mpi3mr_tgtdev_put(tgtdev);
+ }
+ }
+
+ tgtdev = NULL;
+ list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) {
+ if ((tgtdev->dev_handle != MPI3MR_INVALID_DEV_HANDLE) &&
+ !tgtdev->is_hidden && !tgtdev->host_exposed)
+ mpi3mr_report_tgtdev_to_host(mrioc, tgtdev->perst_id);
+ }
+}
+
+/**
+ * mpi3mr_update_tgtdev - DevStatusChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @tgtdev: Target device internal structure
+ * @dev_pg0: New device page0
+ *
+ * Update the information from the device page0 into the driver
+ * cached target device structure.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_update_tgtdev(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_tgt_dev *tgtdev, struct _mpi3_device_page0 *dev_pg0)
+{
+ u16 flags = 0;
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+
+ tgtdev->perst_id = le16_to_cpu(dev_pg0->persistent_id);
+ tgtdev->dev_handle = le16_to_cpu(dev_pg0->dev_handle);
+ tgtdev->dev_type = dev_pg0->device_form;
+ tgtdev->encl_handle = le16_to_cpu(dev_pg0->enclosure_handle);
+ tgtdev->parent_handle = le16_to_cpu(dev_pg0->parent_dev_handle);
+ tgtdev->slot = le16_to_cpu(dev_pg0->slot);
+ tgtdev->q_depth = le16_to_cpu(dev_pg0->queue_depth);
+ tgtdev->wwid = le64_to_cpu(dev_pg0->wwid);
+
+ flags = le16_to_cpu(dev_pg0->flags);
+ tgtdev->is_hidden = (flags & MPI3_DEVICE0_FLAGS_HIDDEN);
+
+ if (tgtdev->starget && tgtdev->starget->hostdata) {
+ scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+ tgtdev->starget->hostdata;
+ scsi_tgt_priv_data->perst_id = tgtdev->perst_id;
+ scsi_tgt_priv_data->dev_handle = tgtdev->dev_handle;
+ scsi_tgt_priv_data->dev_type = tgtdev->dev_type;
+ }
+
+ switch (tgtdev->dev_type) {
+ case MPI3_DEVICE_DEVFORM_SAS_SATA:
+ {
+ struct _mpi3_device0_sas_sata_format *sasinf =
+ &dev_pg0->device_specific.sas_sata_format;
+ u16 dev_info = le16_to_cpu(sasinf->device_info);
+
+ tgtdev->dev_spec.sas_sata_inf.dev_info = dev_info;
+ tgtdev->dev_spec.sas_sata_inf.sas_address =
+ le64_to_cpu(sasinf->sas_address);
+ if ((dev_info & MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK) !=
+ MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE)
+ tgtdev->is_hidden = 1;
+ else if (!(dev_info & (MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET |
+ MPI3_SAS_DEVICE_INFO_SSP_TARGET)))
+ tgtdev->is_hidden = 1;
+ break;
+ }
+ case MPI3_DEVICE_DEVFORM_VD:
+ {
+ struct _mpi3_device0_vd_format *vdinf =
+ &dev_pg0->device_specific.vd_format;
+
+ tgtdev->dev_spec.vol_inf.state = vdinf->vd_state;
+ if (vdinf->vd_state == MPI3_DEVICE0_VD_STATE_OFFLINE)
+ tgtdev->is_hidden = 1;
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+/**
+ * mpi3mr_devstatuschg_evt_bh - DevStatusChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event information.
+ *
+ * Process Device status Change event and based on device's new
+ * information, either expose the device to the upper layers, or
+ * remove the device from upper layers.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_devstatuschg_evt_bh(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_fwevt *fwevt)
+{
+ u16 dev_handle = 0;
+ u8 uhide = 0, delete = 0, cleanup = 0;
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+ struct _mpi3_event_data_device_status_change *evtdata =
+ (struct _mpi3_event_data_device_status_change *)fwevt->event_data;
+
+ dev_handle = le16_to_cpu(evtdata->dev_handle);
+ ioc_info(mrioc,
+ "%s :device status change: handle(0x%04x): reason code(0x%x)\n",
+ __func__, dev_handle, evtdata->reason_code);
+ switch (evtdata->reason_code) {
+ case MPI3_EVENT_DEV_STAT_RC_HIDDEN:
+ delete = 1;
+ break;
+ case MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN:
+ uhide = 1;
+ break;
+ case MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING:
+ delete = 1;
+ cleanup = 1;
+ break;
+ default:
+ ioc_info(mrioc, "%s :Unhandled reason code(0x%x)\n", __func__,
+ evtdata->reason_code);
+ break;
+ }
+
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle);
+ if (!tgtdev)
+ goto out;
+ if (uhide) {
+ tgtdev->is_hidden = 0;
+ if (!tgtdev->host_exposed)
+ mpi3mr_report_tgtdev_to_host(mrioc, tgtdev->perst_id);
+ }
+ if (tgtdev->starget && tgtdev->starget->hostdata) {
+ if (delete)
+ mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+ }
+ if (cleanup) {
+ mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+ mpi3mr_tgtdev_put(tgtdev);
+ }
+
+out:
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+}
+
+/**
+ * mpi3mr_devinfochg_evt_bh - DeviceInfoChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @dev_pg0: New device page0
+ *
+ * Process Device Info Change event and based on device's new
+ * information, either expose the device to the upper layers, or
+ * remove the device from upper layers or update the details of
+ * the device.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_devinfochg_evt_bh(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_device_page0 *dev_pg0)
+{
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+ u16 dev_handle = 0, perst_id = 0;
+
+ perst_id = le16_to_cpu(dev_pg0->persistent_id);
+ dev_handle = le16_to_cpu(dev_pg0->dev_handle);
+ ioc_info(mrioc,
+ "%s :Device info change: handle(0x%04x): persist_id(0x%x)\n",
+ __func__, dev_handle, perst_id);
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle);
+ if (!tgtdev)
+ goto out;
+ mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0);
+ if (!tgtdev->is_hidden && !tgtdev->host_exposed)
+ mpi3mr_report_tgtdev_to_host(mrioc, perst_id);
+ if (tgtdev->is_hidden && tgtdev->host_exposed)
+ mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+out:
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+}
+
+/**
+ * mpi3mr_sastopochg_evt_bh - SASTopologyChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Prints information about the SAS topology change event and
+ * for "not responding" event code, removes the device from the
+ * upper layers.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_fwevt *fwevt)
+{
+ struct _mpi3_event_data_sas_topology_change_list *event_data =
+ (struct _mpi3_event_data_sas_topology_change_list *)fwevt->event_data;
+ int i;
+ u16 handle;
+ u8 reason_code;
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+
+ for (i = 0; i < event_data->num_entries; i++) {
+ handle = le16_to_cpu(event_data->phy_entry[i].attached_dev_handle);
+ if (!handle)
+ continue;
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+ if (!tgtdev)
+ continue;
+
+ reason_code = event_data->phy_entry[i].status &
+ MPI3_EVENT_SAS_TOPO_PHY_RC_MASK;
+
+ switch (reason_code) {
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING:
+ if (tgtdev->host_exposed)
+ mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+ mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+ mpi3mr_tgtdev_put(tgtdev);
+ break;
+ default:
+ break;
+ }
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+ }
+}
+
+/**
+ * mpi3mr_fwevt_bh - Firmware event bottomhalf handler
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Identifies the firmware event and calls corresponding bottomg
+ * half handler and sends event acknowledgment if required.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_fwevt_bh(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_fwevt *fwevt)
+{
+ mrioc->current_event = fwevt;
+ mpi3mr_fwevt_del_from_list(mrioc, fwevt);
+
+ if (mrioc->stop_drv_processing)
+ goto out;
+
+ if (!fwevt->process_evt)
+ goto evt_ack;
+
+ switch (fwevt->event_id) {
+ case MPI3_EVENT_DEVICE_ADDED:
+ {
+ struct _mpi3_device_page0 *dev_pg0 =
+ (struct _mpi3_device_page0 *)fwevt->event_data;
+ mpi3mr_report_tgtdev_to_host(mrioc,
+ le16_to_cpu(dev_pg0->persistent_id));
+ break;
+ }
+ case MPI3_EVENT_DEVICE_INFO_CHANGED:
+ {
+ mpi3mr_devinfochg_evt_bh(mrioc,
+ (struct _mpi3_device_page0 *)fwevt->event_data);
+ break;
+ }
+ case MPI3_EVENT_DEVICE_STATUS_CHANGE:
+ {
+ mpi3mr_devstatuschg_evt_bh(mrioc, fwevt);
+ break;
+ }
+ case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+ {
+ mpi3mr_sastopochg_evt_bh(mrioc, fwevt);
+ break;
+ }
+ default:
+ break;
+ }
+
+evt_ack:
+ if (fwevt->send_ack)
+ mpi3mr_send_event_ack(mrioc, fwevt->event_id,
+ fwevt->evt_ctx);
+out:
+ /* Put fwevt reference count to neutralize kref_init increment */
+ mpi3mr_fwevt_put(fwevt);
+ mrioc->current_event = NULL;
+}
+
+/**
+ * mpi3mr_fwevt_worker - Firmware event worker
+ * @work: Work struct containing firmware event
+ *
+ * Extracts the firmware event and calls mpi3mr_fwevt_bh.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_fwevt_worker(struct work_struct *work)
+{
+ struct mpi3mr_fwevt *fwevt = container_of(work, struct mpi3mr_fwevt,
+ work);
+ mpi3mr_fwevt_bh(fwevt->mrioc, fwevt);
+ /*
+ * Put fwevt reference count after
+ * dequeuing it from worker queue
+ */
+ mpi3mr_fwevt_put(fwevt);
+}
+
+/**
+ * mpi3mr_create_tgtdev - Create and add a target device
+ * @mrioc: Adapter instance reference
+ * @dev_pg0: Device Page 0 data
+ *
+ * If the device specified by the device page 0 data is not
+ * present in the driver's internal list, allocate the memory
+ * for the device, populate the data and add to the list, else
+ * update the device data. The key is persistent ID.
+ *
+ * Return: 0 on success, -ENOMEM on memory allocation failure
+ */
+static int mpi3mr_create_tgtdev(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_device_page0 *dev_pg0)
+{
+ int retval = 0;
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+ u16 perst_id = 0;
+
+ perst_id = le16_to_cpu(dev_pg0->persistent_id);
+ tgtdev = mpi3mr_get_tgtdev_by_perst_id(mrioc, perst_id);
+ if (tgtdev) {
+ mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0);
+ mpi3mr_tgtdev_put(tgtdev);
+ } else {
+ tgtdev = mpi3mr_alloc_tgtdev();
+ if (!tgtdev)
+ return -ENOMEM;
+ mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0);
+ mpi3mr_tgtdev_add_to_list(mrioc, tgtdev);
+ }
+
+ return retval;
+}
+
+/**
+ * mpi3mr_flush_delayed_rmhs_list - Flush pending commands
+ * @mrioc: Adapter instance reference
+ *
+ * Flush pending commands in the delayed removal handshake list
+ * due to a controller reset or driver removal as a cleanup.
+ *
+ * Return: Nothing
+ */
+void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc)
+{
+ struct delayed_dev_rmhs_node *_rmhs_node;
+
+ while (!list_empty(&mrioc->delayed_rmhs_list)) {
+ _rmhs_node = list_entry(mrioc->delayed_rmhs_list.next,
+ struct delayed_dev_rmhs_node, list);
+ list_del(&_rmhs_node->list);
+ kfree(_rmhs_node);
+ }
+}
+
+/**
+ * mpi3mr_dev_rmhs_complete_iou - Device removal IOUC completion
+ * @mrioc: Adapter instance reference
+ * @drv_cmd: Internal command tracker
+ *
+ * Issues a target reset TM to the firmware from the device
+ * removal TM pend list or retry the removal handshake sequence
+ * based on the IOU control request IOC status.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_dev_rmhs_complete_iou(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_drv_cmd *drv_cmd)
+{
+ u16 cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN;
+ struct delayed_dev_rmhs_node *delayed_dev_rmhs = NULL;
+
+ ioc_info(mrioc,
+ "%s :dev_rmhs_iouctrl_complete:handle(0x%04x), ioc_status(0x%04x), loginfo(0x%08x)\n",
+ __func__, drv_cmd->dev_handle, drv_cmd->ioc_status,
+ drv_cmd->ioc_loginfo);
+ if (drv_cmd->ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+ if (drv_cmd->retry_count < MPI3MR_DEV_RMHS_RETRY_COUNT) {
+ drv_cmd->retry_count++;
+ ioc_info(mrioc,
+ "%s :dev_rmhs_iouctrl_complete: handle(0x%04x)retrying handshake retry=%d\n",
+ __func__, drv_cmd->dev_handle,
+ drv_cmd->retry_count);
+ mpi3mr_dev_rmhs_send_tm(mrioc, drv_cmd->dev_handle,
+ drv_cmd, drv_cmd->iou_rc);
+ return;
+ }
+ ioc_err(mrioc,
+ "%s :dev removal handshake failed after all retries: handle(0x%04x)\n",
+ __func__, drv_cmd->dev_handle);
+ } else {
+ ioc_info(mrioc,
+ "%s :dev removal handshake completed successfully: handle(0x%04x)\n",
+ __func__, drv_cmd->dev_handle);
+ clear_bit(drv_cmd->dev_handle, mrioc->removepend_bitmap);
+ }
+
+ if (!list_empty(&mrioc->delayed_rmhs_list)) {
+ delayed_dev_rmhs = list_entry(mrioc->delayed_rmhs_list.next,
+ struct delayed_dev_rmhs_node, list);
+ drv_cmd->dev_handle = delayed_dev_rmhs->handle;
+ drv_cmd->retry_count = 0;
+ drv_cmd->iou_rc = delayed_dev_rmhs->iou_rc;
+ ioc_info(mrioc,
+ "%s :dev_rmhs_iouctrl_complete: processing delayed TM: handle(0x%04x)\n",
+ __func__, drv_cmd->dev_handle);
+ mpi3mr_dev_rmhs_send_tm(mrioc, drv_cmd->dev_handle, drv_cmd,
+ drv_cmd->iou_rc);
+ list_del(&delayed_dev_rmhs->list);
+ kfree(delayed_dev_rmhs);
+ return;
+ }
+ drv_cmd->state = MPI3MR_CMD_NOTUSED;
+ drv_cmd->callback = NULL;
+ drv_cmd->retry_count = 0;
+ drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+ clear_bit(cmd_idx, mrioc->devrem_bitmap);
+}
+
+/**
+ * mpi3mr_dev_rmhs_complete_tm - Device removal TM completion
+ * @mrioc: Adapter instance reference
+ * @drv_cmd: Internal command tracker
+ *
+ * Issues a target reset TM to the firmware from the device
+ * removal TM pend list or issue IO unit control request as
+ * part of device removal or hidden acknowledgment handshake.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_dev_rmhs_complete_tm(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_drv_cmd *drv_cmd)
+{
+ struct _mpi3_iounit_control_request iou_ctrl;
+ u16 cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN;
+ struct _mpi3_scsi_task_mgmt_reply *tm_reply = NULL;
+ int retval;
+
+ if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID)
+ tm_reply = (struct _mpi3_scsi_task_mgmt_reply *)drv_cmd->reply;
+
+ if (tm_reply)
+ pr_info(IOCNAME
+ "dev_rmhs_tr_complete:handle(0x%04x), ioc_status(0x%04x), loginfo(0x%08x), term_count(%d)\n",
+ mrioc->name, drv_cmd->dev_handle, drv_cmd->ioc_status,
+ drv_cmd->ioc_loginfo,
+ le32_to_cpu(tm_reply->termination_count));
+
+ pr_info(IOCNAME "Issuing IOU CTL: handle(0x%04x) dev_rmhs idx(%d)\n",
+ mrioc->name, drv_cmd->dev_handle, cmd_idx);
+
+ memset(&iou_ctrl, 0, sizeof(iou_ctrl));
+
+ drv_cmd->state = MPI3MR_CMD_PENDING;
+ drv_cmd->is_waiting = 0;
+ drv_cmd->callback = mpi3mr_dev_rmhs_complete_iou;
+ iou_ctrl.operation = drv_cmd->iou_rc;
+ iou_ctrl.param16[0] = cpu_to_le16(drv_cmd->dev_handle);
+ iou_ctrl.host_tag = cpu_to_le16(drv_cmd->host_tag);
+ iou_ctrl.function = MPI3_FUNCTION_IO_UNIT_CONTROL;
+
+ retval = mpi3mr_admin_request_post(mrioc, &iou_ctrl, sizeof(iou_ctrl),
+ 1);
+ if (retval) {
+ pr_err(IOCNAME "Issue DevRmHsTMIOUCTL: Admin post failed\n",
+ mrioc->name);
+ goto out_failed;
+ }
+
+ return;
+out_failed:
+ drv_cmd->state = MPI3MR_CMD_NOTUSED;
+ drv_cmd->callback = NULL;
+ drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+ drv_cmd->retry_count = 0;
+ clear_bit(cmd_idx, mrioc->devrem_bitmap);
+}
+
+/**
+ * mpi3mr_dev_rmhs_send_tm - Issue TM for device removal
+ * @mrioc: Adapter instance reference
+ * @handle: Device handle
+ * @cmdparam: Internal command tracker
+ * @iou_rc: IO unit reason code
+ *
+ * Issues a target reset TM to the firmware or add it to a pend
+ * list as part of device removal or hidden acknowledgment
+ * handshake.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle,
+ struct mpi3mr_drv_cmd *cmdparam, u8 iou_rc)
+{
+ struct _mpi3_scsi_task_mgmt_request tm_req;
+ int retval = 0;
+ u16 cmd_idx = MPI3MR_NUM_DEVRMCMD;
+ u8 retrycount = 5;
+ struct mpi3mr_drv_cmd *drv_cmd = cmdparam;
+ struct delayed_dev_rmhs_node *delayed_dev_rmhs = NULL;
+
+ if (drv_cmd)
+ goto issue_cmd;
+ do {
+ cmd_idx = find_first_zero_bit(mrioc->devrem_bitmap,
+ MPI3MR_NUM_DEVRMCMD);
+ if (cmd_idx < MPI3MR_NUM_DEVRMCMD) {
+ if (!test_and_set_bit(cmd_idx, mrioc->devrem_bitmap))
+ break;
+ cmd_idx = MPI3MR_NUM_DEVRMCMD;
+ }
+ } while (retrycount--);
+
+ if (cmd_idx >= MPI3MR_NUM_DEVRMCMD) {
+ delayed_dev_rmhs = kzalloc(sizeof(*delayed_dev_rmhs),
+ GFP_ATOMIC);
+ if (!delayed_dev_rmhs)
+ return;
+ INIT_LIST_HEAD(&delayed_dev_rmhs->list);
+ delayed_dev_rmhs->handle = handle;
+ delayed_dev_rmhs->iou_rc = iou_rc;
+ list_add_tail(&delayed_dev_rmhs->list,
+ &mrioc->delayed_rmhs_list);
+ ioc_info(mrioc, "%s :DevRmHs: tr:handle(0x%04x) is postponed\n",
+ __func__, handle);
+ return;
+ }
+ drv_cmd = &mrioc->dev_rmhs_cmds[cmd_idx];
+
+issue_cmd:
+ cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN;
+ ioc_info(mrioc,
+ "%s :Issuing TR TM: for devhandle 0x%04x with dev_rmhs %d\n",
+ __func__, handle, cmd_idx);
+
+ memset(&tm_req, 0, sizeof(tm_req));
+ if (drv_cmd->state & MPI3MR_CMD_PENDING) {
+ ioc_err(mrioc, "%s :Issue TM: Command is in use\n", __func__);
+ goto out;
+ }
+ drv_cmd->state = MPI3MR_CMD_PENDING;
+ drv_cmd->is_waiting = 0;
+ drv_cmd->callback = mpi3mr_dev_rmhs_complete_tm;
+ drv_cmd->dev_handle = handle;
+ drv_cmd->iou_rc = iou_rc;
+ tm_req.dev_handle = cpu_to_le16(handle);
+ tm_req.task_type = MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+ tm_req.host_tag = cpu_to_le16(drv_cmd->host_tag);
+ tm_req.task_host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INVALID);
+ tm_req.function = MPI3_FUNCTION_SCSI_TASK_MGMT;
+
+ set_bit(handle, mrioc->removepend_bitmap);
+ retval = mpi3mr_admin_request_post(mrioc, &tm_req, sizeof(tm_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "%s :Issue DevRmHsTM: Admin Post failed\n",
+ __func__);
+ goto out_failed;
+ }
+out:
+ return;
+out_failed:
+ drv_cmd->state = MPI3MR_CMD_NOTUSED;
+ drv_cmd->callback = NULL;
+ drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+ drv_cmd->retry_count = 0;
+ clear_bit(cmd_idx, mrioc->devrem_bitmap);
+}
+
+/**
+ * mpi3mr_sastopochg_evt_th - SASTopologyChange evt tophalf
+ * @mrioc: Adapter instance reference
+ * @event_reply: event data
+ *
+ * Checks for the reason code and based on that either block I/O
+ * to device, or unblock I/O to the device, or start the device
+ * removal handshake with reason as remove with the firmware for
+ * SAS/SATA devices.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_sastopochg_evt_th(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_notification_reply *event_reply)
+{
+ struct _mpi3_event_data_sas_topology_change_list *topo_evt =
+ (struct _mpi3_event_data_sas_topology_change_list *)event_reply->event_data;
+ int i;
+ u16 handle;
+ u8 reason_code;
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL;
+
+ for (i = 0; i < topo_evt->num_entries; i++) {
+ handle = le16_to_cpu(topo_evt->phy_entry[i].attached_dev_handle);
+ if (!handle)
+ continue;
+ reason_code = topo_evt->phy_entry[i].status &
+ MPI3_EVENT_SAS_TOPO_PHY_RC_MASK;
+ scsi_tgt_priv_data = NULL;
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+ if (tgtdev && tgtdev->starget && tgtdev->starget->hostdata)
+ scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+ tgtdev->starget->hostdata;
+ switch (reason_code) {
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING:
+ if (scsi_tgt_priv_data) {
+ scsi_tgt_priv_data->dev_removed = 1;
+ scsi_tgt_priv_data->dev_removedelay = 0;
+ atomic_set(&scsi_tgt_priv_data->block_io, 0);
+ }
+ mpi3mr_dev_rmhs_send_tm(mrioc, handle, NULL,
+ MPI3_CTRL_OP_REMOVE_DEVICE);
+ break;
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING:
+ if (scsi_tgt_priv_data) {
+ scsi_tgt_priv_data->dev_removedelay = 1;
+ atomic_inc(&scsi_tgt_priv_data->block_io);
+ }
+ break;
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING:
+ if (scsi_tgt_priv_data &&
+ scsi_tgt_priv_data->dev_removedelay) {
+ scsi_tgt_priv_data->dev_removedelay = 0;
+ atomic_dec_if_positive
+ (&scsi_tgt_priv_data->block_io);
+ }
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED:
+ default:
+ break;
+ }
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+ }
+}
+
+/**
+ * mpi3mr_devstatuschg_evt_th - DeviceStatusChange evt tophalf
+ * @mrioc: Adapter instance reference
+ * @event_reply: event data
+ *
+ * Checks for the reason code and based on that either block I/O
+ * to device, or unblock I/O to the device, or start the device
+ * removal handshake with reason as remove/hide acknowledgment
+ * with the firmware.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_devstatuschg_evt_th(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_notification_reply *event_reply)
+{
+ u16 dev_handle = 0;
+ u8 ublock = 0, block = 0, hide = 0, delete = 0, remove = 0;
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL;
+ struct _mpi3_event_data_device_status_change *evtdata =
+ (struct _mpi3_event_data_device_status_change *)event_reply->event_data;
+
+ if (mrioc->stop_drv_processing)
+ goto out;
+
+ dev_handle = le16_to_cpu(evtdata->dev_handle);
+
+ switch (evtdata->reason_code) {
+ case MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT:
+ case MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT:
+ block = 1;
+ break;
+ case MPI3_EVENT_DEV_STAT_RC_HIDDEN:
+ delete = 1;
+ hide = 1;
+ break;
+ case MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING:
+ delete = 1;
+ remove = 1;
+ break;
+ case MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP:
+ case MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP:
+ ublock = 1;
+ break;
+ default:
+ break;
+ }
+
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle);
+ if (!tgtdev)
+ goto out;
+ if (hide)
+ tgtdev->is_hidden = hide;
+ if (tgtdev->starget && tgtdev->starget->hostdata) {
+ scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+ tgtdev->starget->hostdata;
+ if (block)
+ atomic_inc(&scsi_tgt_priv_data->block_io);
+ if (delete)
+ scsi_tgt_priv_data->dev_removed = 1;
+ if (ublock)
+ atomic_dec_if_positive(&scsi_tgt_priv_data->block_io);
+ }
+ if (remove)
+ mpi3mr_dev_rmhs_send_tm(mrioc, dev_handle, NULL,
+ MPI3_CTRL_OP_REMOVE_DEVICE);
+ if (hide)
+ mpi3mr_dev_rmhs_send_tm(mrioc, dev_handle, NULL,
+ MPI3_CTRL_OP_HIDDEN_ACK);
+
+out:
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+}
+
+/**
+ * mpi3mr_os_handle_events - Firmware event handler
+ * @mrioc: Adapter instance reference
+ * @event_reply: event data
+ *
+ * Identify whteher the event has to handled and acknowledged
+ * and either process the event in the tophalf and/or schedule a
+ * bottom half through mpi3mr_fwevt_worker.
+ *
+ * Return: Nothing
+ */
+void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_notification_reply *event_reply)
+{
+ u16 evt_type, sz;
+ struct mpi3mr_fwevt *fwevt = NULL;
+ bool ack_req = 0, process_evt_bh = 0;
+
+ if (mrioc->stop_drv_processing)
+ return;
+
+ if ((event_reply->msg_flags & MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK)
+ == MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED)
+ ack_req = 1;
+
+ evt_type = event_reply->event;
+
+ switch (evt_type) {
+ case MPI3_EVENT_DEVICE_ADDED:
+ {
+ struct _mpi3_device_page0 *dev_pg0 =
+ (struct _mpi3_device_page0 *)event_reply->event_data;
+ if (mpi3mr_create_tgtdev(mrioc, dev_pg0))
+ ioc_err(mrioc,
+ "%s :Failed to add device in the device add event\n",
+ __func__);
+ else
+ process_evt_bh = 1;
+ break;
+ }
+ case MPI3_EVENT_DEVICE_STATUS_CHANGE:
+ {
+ process_evt_bh = 1;
+ mpi3mr_devstatuschg_evt_th(mrioc, event_reply);
+ break;
+ }
+ case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+ {
+ process_evt_bh = 1;
+ mpi3mr_sastopochg_evt_th(mrioc, event_reply);
+ break;
+ }
+ case MPI3_EVENT_DEVICE_INFO_CHANGED:
+ {
+ process_evt_bh = 1;
+ break;
+ }
+ case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE:
+ case MPI3_EVENT_SAS_DISCOVERY:
+ case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+ break;
+ default:
+ ioc_info(mrioc, "%s :event 0x%02x is not handled\n",
+ __func__, evt_type);
+ break;
+ }
+ if (process_evt_bh || ack_req) {
+ sz = event_reply->event_data_length * 4;
+ fwevt = mpi3mr_alloc_fwevt(sz);
+ if (!fwevt) {
+ ioc_info(mrioc, "%s :failure at %s:%d/%s()!\n",
+ __func__, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ memcpy(fwevt->event_data, event_reply->event_data, sz);
+ fwevt->mrioc = mrioc;
+ fwevt->event_id = evt_type;
+ fwevt->send_ack = ack_req;
+ fwevt->process_evt = process_evt_bh;
+ fwevt->evt_ctx = le32_to_cpu(event_reply->event_context);
+ mpi3mr_fwevt_add_to_list(mrioc, fwevt);
+ }
+}
+
/**
* mpi3mr_process_op_reply_desc - reply descriptor handler
* @mrioc: Adapter instance reference
@@ -584,6 +1846,33 @@ static int mpi3mr_scan_finished(struct Scsi_Host *shost,
*/
static void mpi3mr_slave_destroy(struct scsi_device *sdev)
{
+ struct Scsi_Host *shost;
+ struct mpi3mr_ioc *mrioc;
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+ struct mpi3mr_tgt_dev *tgt_dev;
+ unsigned long flags;
+ struct scsi_target *starget;
+
+ if (!sdev->hostdata)
+ return;
+
+ starget = scsi_target(sdev);
+ shost = dev_to_shost(&starget->dev);
+ mrioc = shost_priv(shost);
+ scsi_tgt_priv_data = starget->hostdata;
+
+ scsi_tgt_priv_data->num_luns--;
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id);
+ if (tgt_dev && (!scsi_tgt_priv_data->num_luns))
+ tgt_dev->starget = NULL;
+ if (tgt_dev)
+ mpi3mr_tgtdev_put(tgt_dev);
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+
+ kfree(sdev->hostdata);
+ sdev->hostdata = NULL;
}
/**
@@ -596,6 +1885,34 @@ static void mpi3mr_slave_destroy(struct scsi_device *sdev)
*/
static void mpi3mr_target_destroy(struct scsi_target *starget)
{
+ struct Scsi_Host *shost;
+ struct mpi3mr_ioc *mrioc;
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+ struct mpi3mr_tgt_dev *tgt_dev;
+ unsigned long flags;
+
+ if (!starget->hostdata)
+ return;
+
+ shost = dev_to_shost(&starget->dev);
+ mrioc = shost_priv(shost);
+ scsi_tgt_priv_data = starget->hostdata;
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ tgt_dev = __mpi3mr_get_tgtdev_from_tgtpriv(mrioc, scsi_tgt_priv_data);
+ if (tgt_dev && (tgt_dev->starget == starget) &&
+ (tgt_dev->perst_id == starget->id))
+ tgt_dev->starget = NULL;
+ if (tgt_dev) {
+ scsi_tgt_priv_data->tgt_dev = NULL;
+ scsi_tgt_priv_data->perst_id = 0;
+ mpi3mr_tgtdev_put(tgt_dev);
+ mpi3mr_tgtdev_put(tgt_dev);
+ }
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+
+ kfree(starget->hostdata);
+ starget->hostdata = NULL;
}
/**
@@ -609,7 +1926,25 @@ static void mpi3mr_target_destroy(struct scsi_target *starget)
*/
static int mpi3mr_slave_configure(struct scsi_device *sdev)
{
+ struct scsi_target *starget;
+ struct Scsi_Host *shost;
+ struct mpi3mr_ioc *mrioc;
+ struct mpi3mr_tgt_dev *tgt_dev;
+ unsigned long flags;
int retval = 0;
+
+ starget = scsi_target(sdev);
+ shost = dev_to_shost(&starget->dev);
+ mrioc = shost_priv(shost);
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id);
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+ if (!tgt_dev)
+ return -ENXIO;
+
+ mpi3mr_tgtdev_put(tgt_dev);
+
return retval;
}
@@ -623,7 +1958,45 @@ static int mpi3mr_slave_configure(struct scsi_device *sdev)
*/
static int mpi3mr_slave_alloc(struct scsi_device *sdev)
{
+ struct Scsi_Host *shost;
+ struct mpi3mr_ioc *mrioc;
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+ struct mpi3mr_tgt_dev *tgt_dev;
+ struct mpi3mr_sdev_priv_data *scsi_dev_priv_data;
+ unsigned long flags;
+ struct scsi_target *starget;
int retval = 0;
+
+ starget = scsi_target(sdev);
+ shost = dev_to_shost(&starget->dev);
+ mrioc = shost_priv(shost);
+ scsi_tgt_priv_data = starget->hostdata;
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id);
+
+ if (tgt_dev) {
+ if (tgt_dev->starget == NULL)
+ tgt_dev->starget = starget;
+ mpi3mr_tgtdev_put(tgt_dev);
+ retval = 0;
+ } else {
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+ return -ENXIO;
+ }
+
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+
+ scsi_dev_priv_data = kzalloc(sizeof(*scsi_dev_priv_data), GFP_KERNEL);
+ if (!scsi_dev_priv_data)
+ return -ENOMEM;
+
+ scsi_dev_priv_data->lun_id = sdev->lun;
+ scsi_dev_priv_data->tgt_priv_data = scsi_tgt_priv_data;
+ sdev->hostdata = scsi_dev_priv_data;
+
+ scsi_tgt_priv_data->num_luns++;
+
return retval;
}
@@ -637,7 +2010,39 @@ static int mpi3mr_slave_alloc(struct scsi_device *sdev)
*/
static int mpi3mr_target_alloc(struct scsi_target *starget)
{
- int retval = -ENODEV;
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ struct mpi3mr_ioc *mrioc = shost_priv(shost);
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+ struct mpi3mr_tgt_dev *tgt_dev;
+ unsigned long flags;
+ int retval = 0;
+
+ scsi_tgt_priv_data = kzalloc(sizeof(*scsi_tgt_priv_data), GFP_KERNEL);
+ if (!scsi_tgt_priv_data)
+ return -ENOMEM;
+
+ starget->hostdata = scsi_tgt_priv_data;
+ scsi_tgt_priv_data->starget = starget;
+ scsi_tgt_priv_data->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+
+ spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+ tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id);
+ if (tgt_dev && !tgt_dev->is_hidden) {
+ starget->hostdata = scsi_tgt_priv_data;
+ scsi_tgt_priv_data->starget = starget;
+ scsi_tgt_priv_data->dev_handle = tgt_dev->dev_handle;
+ scsi_tgt_priv_data->perst_id = tgt_dev->perst_id;
+ scsi_tgt_priv_data->dev_type = tgt_dev->dev_type;
+ scsi_tgt_priv_data->tgt_dev = tgt_dev;
+ tgt_dev->starget = starget;
+ atomic_set(&scsi_tgt_priv_data->block_io, 0);
+ retval = 0;
+ } else {
+ kfree(scsi_tgt_priv_data);
+ retval = -ENXIO;
+ }
+ spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+
return retval;
}
@@ -832,7 +2237,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct mpi3mr_ioc *mrioc = NULL;
struct Scsi_Host *shost = NULL;
- int retval = 0;
+ int retval = 0, i;
shost = scsi_host_alloc(&mpi3mr_driver_template,
sizeof(struct mpi3mr_ioc));
@@ -853,11 +2258,21 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init(&mrioc->admin_req_lock);
spin_lock_init(&mrioc->reply_free_queue_lock);
spin_lock_init(&mrioc->sbq_lock);
+ spin_lock_init(&mrioc->fwevt_lock);
+ spin_lock_init(&mrioc->tgtdev_lock);
spin_lock_init(&mrioc->watchdog_lock);
spin_lock_init(&mrioc->chain_buf_lock);
+ INIT_LIST_HEAD(&mrioc->fwevt_list);
+ INIT_LIST_HEAD(&mrioc->tgtdev_list);
+ INIT_LIST_HEAD(&mrioc->delayed_rmhs_list);
+
mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
+ for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++)
+ mpi3mr_init_drv_cmd(&mrioc->dev_rmhs_cmds[i],
+ MPI3MR_HOSTTAG_DEVRMCMD_MIN + i);
+
if (pdev->revision)
mrioc->enable_segqueue = true;
@@ -873,6 +2288,17 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
shost->max_channel = 1;
shost->max_id = 0xFFFFFFFF;
+ snprintf(mrioc->fwevt_worker_name, sizeof(mrioc->fwevt_worker_name),
+ "%s%d_fwevt_wrkr", mrioc->driver_name, mrioc->id);
+ mrioc->fwevt_worker_thread = alloc_ordered_workqueue(
+ mrioc->fwevt_worker_name, WQ_MEM_RECLAIM);
+ if (!mrioc->fwevt_worker_thread) {
+ ioc_err(mrioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ retval = -ENODEV;
+ goto out_fwevtthread_failed;
+ }
+
mrioc->is_driver_loading = 1;
if (mpi3mr_init_ioc(mrioc)) {
ioc_err(mrioc, "failure at %s:%d/%s()!\n",
@@ -899,6 +2325,8 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
addhost_failed:
mpi3mr_cleanup_ioc(mrioc);
out_iocinit_failed:
+ destroy_workqueue(mrioc->fwevt_worker_thread);
+out_fwevtthread_failed:
spin_lock(&mrioc_list_lock);
list_del(&mrioc->list);
spin_unlock(&mrioc_list_lock);
@@ -920,14 +2348,30 @@ static void mpi3mr_remove(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct mpi3mr_ioc *mrioc;
+ struct workqueue_struct *wq;
+ unsigned long flags;
+ struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next;
mrioc = shost_priv(shost);
while (mrioc->reset_in_progress || mrioc->is_driver_loading)
ssleep(1);
mrioc->stop_drv_processing = 1;
+ mpi3mr_cleanup_fwevt_list(mrioc);
+ spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+ wq = mrioc->fwevt_worker_thread;
+ mrioc->fwevt_worker_thread = NULL;
+ spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+ if (wq)
+ destroy_workqueue(wq);
scsi_remove_host(shost);
+ list_for_each_entry_safe(tgtdev, tgtdev_next, &mrioc->tgtdev_list,
+ list) {
+ mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+ mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+ mpi3mr_tgtdev_put(tgtdev);
+ }
mpi3mr_cleanup_ioc(mrioc);
spin_lock(&mrioc_list_lock);
@@ -950,6 +2394,8 @@ static void mpi3mr_shutdown(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct mpi3mr_ioc *mrioc;
+ struct workqueue_struct *wq;
+ unsigned long flags;
if (!shost)
return;
@@ -959,6 +2405,13 @@ static void mpi3mr_shutdown(struct pci_dev *pdev)
ssleep(1);
mrioc->stop_drv_processing = 1;
+ mpi3mr_cleanup_fwevt_list(mrioc);
+ spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+ wq = mrioc->fwevt_worker_thread;
+ mrioc->fwevt_worker_thread = NULL;
+ spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+ if (wq)
+ destroy_workqueue(wq);
mpi3mr_cleanup_ioc(mrioc);
}
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* Re: [PATCH v5 06/24] mpi3mr: add support of event handling part-1
2021-05-13 8:35 ` [PATCH v5 06/24] mpi3mr: add support of event handling part-1 Kashyap Desai
@ 2021-05-14 11:45 ` Hannes Reinecke
0 siblings, 0 replies; 38+ messages in thread
From: Hannes Reinecke @ 2021-05-14 11:45 UTC (permalink / raw)
To: Kashyap Desai, linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash
On 5/13/21 10:35 AM, Kashyap Desai wrote:
> Firmware can report various MPI Events.
> Support for certain Events (as listed below) are enabled in the driver
> and their processing in driver is covered in this patch.
>
> MPI3_EVENT_DEVICE_ADDED
> MPI3_EVENT_DEVICE_INFO_CHANGED
> MPI3_EVENT_DEVICE_STATUS_CHANGE
> MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE
> MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST
> MPI3_EVENT_SAS_DISCOVERY
> MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR
>
> Key support in this patch is device add/removal.
>
> Fix some compilation warning reported by kernel test robot.
>
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> Reported-by: kernel test robot <lkp@intel.com>
> Reviewed-by: Tomas Henzl <thenzl@redhat.com>
> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
>
> Cc: sathya.prakash@broadcom.com
> ---
> drivers/scsi/mpi3mr/mpi/mpi30_api.h | 2 +
> drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 1884 ++++++++++++++++++++++++++
> drivers/scsi/mpi3mr/mpi/mpi30_sas.h | 37 +
> drivers/scsi/mpi3mr/mpi3mr.h | 202 +++
> drivers/scsi/mpi3mr/mpi3mr_fw.c | 197 ++-
> drivers/scsi/mpi3mr/mpi3mr_os.c | 1457 +++++++++++++++++++-
> 6 files changed, 3776 insertions(+), 3 deletions(-)
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
> create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_sas.h
>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, 90409 Nürnberg
GF: F. Imendörffer, HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 07/24] mpi3mr: add support of event handling pcie devices part-2
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (5 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 06/24] mpi3mr: add support of event handling part-1 Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 08/24] mpi3mr: add support of event handling part-3 Kashyap Desai
` (16 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 9528 bytes --]
Firmware can report various MPI Events.
Support for certain Events (as listed below) are enabled in the driver
and their processing in driver is covered in this patch.
MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST
MPI3_EVENT_PCIE_ENUMERATION
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 2 +
drivers/scsi/mpi3mr/mpi3mr_os.c | 201 ++++++++++++++++++++++++++++++++
2 files changed, 203 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index a5e8c7c87314..2b3ab96a06e2 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -2728,6 +2728,8 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY);
mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_ENUMERATION);
retval = mpi3mr_issue_event_notification(mrioc);
if (retval) {
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 1b372baec295..baaeb2db8a5d 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -562,6 +562,40 @@ static int mpi3mr_report_tgtdev_to_host(struct mpi3mr_ioc *mrioc,
return retval;
}
+/**
+ * mpi3mr_update_sdev - Update SCSI device information
+ * @sdev: SCSI device reference
+ * @data: target device reference
+ *
+ * This is an iterator function called for each SCSI device in a
+ * target to update the target specific information into each
+ * SCSI device.
+ *
+ * Return: Nothing.
+ */
+static void
+mpi3mr_update_sdev(struct scsi_device *sdev, void *data)
+{
+ struct mpi3mr_tgt_dev *tgtdev;
+
+ tgtdev = (struct mpi3mr_tgt_dev *)data;
+ if (!tgtdev)
+ return;
+
+ switch (tgtdev->dev_type) {
+ case MPI3_DEVICE_DEVFORM_PCIE:
+ /*The block layer hw sector size = 512*/
+ blk_queue_max_hw_sectors(sdev->request_queue,
+ tgtdev->dev_spec.pcie_inf.mdts / 512);
+ blk_queue_virt_boundary(sdev->request_queue,
+ ((1 << tgtdev->dev_spec.pcie_inf.pgsz) - 1));
+
+ break;
+ default:
+ break;
+ }
+}
+
/**
* mpi3mr_rfresh_tgtdevs - Refresh target device exposure
* @mrioc: Adapter instance reference
@@ -650,6 +684,33 @@ static void mpi3mr_update_tgtdev(struct mpi3mr_ioc *mrioc,
tgtdev->is_hidden = 1;
break;
}
+ case MPI3_DEVICE_DEVFORM_PCIE:
+ {
+ struct _mpi3_device0_pcie_format *pcieinf =
+ &dev_pg0->device_specific.pcie_format;
+ u16 dev_info = le16_to_cpu(pcieinf->device_info);
+
+ tgtdev->dev_spec.pcie_inf.capb =
+ le32_to_cpu(pcieinf->capabilities);
+ tgtdev->dev_spec.pcie_inf.mdts = MPI3MR_DEFAULT_MDTS;
+ /* 2^12 = 4096 */
+ tgtdev->dev_spec.pcie_inf.pgsz = 12;
+ if (dev_pg0->access_status == MPI3_DEVICE0_ASTATUS_NO_ERRORS) {
+ tgtdev->dev_spec.pcie_inf.mdts =
+ le32_to_cpu(pcieinf->maximum_data_transfer_size);
+ tgtdev->dev_spec.pcie_inf.pgsz = pcieinf->page_size;
+ tgtdev->dev_spec.pcie_inf.reset_to =
+ pcieinf->controller_reset_to;
+ tgtdev->dev_spec.pcie_inf.abort_to =
+ pcieinf->nv_me_abort_to;
+ }
+ if (tgtdev->dev_spec.pcie_inf.mdts > (1024 * 1024))
+ tgtdev->dev_spec.pcie_inf.mdts = (1024 * 1024);
+ if ((dev_info & MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK) !=
+ MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE)
+ tgtdev->is_hidden = 1;
+ break;
+ }
case MPI3_DEVICE_DEVFORM_VD:
{
struct _mpi3_device0_vd_format *vdinf =
@@ -759,6 +820,9 @@ static void mpi3mr_devinfochg_evt_bh(struct mpi3mr_ioc *mrioc,
mpi3mr_report_tgtdev_to_host(mrioc, perst_id);
if (tgtdev->is_hidden && tgtdev->host_exposed)
mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+ if (!tgtdev->is_hidden && tgtdev->host_exposed && tgtdev->starget)
+ starget_for_each_device(tgtdev->starget, (void *)tgtdev,
+ mpi3mr_update_sdev);
out:
if (tgtdev)
mpi3mr_tgtdev_put(tgtdev);
@@ -811,6 +875,53 @@ static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc,
}
}
+/**
+ * mpi3mr_pcietopochg_evt_bh - PCIeTopologyChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Prints information about the PCIe topology change event and
+ * for "not responding" event code, removes the device from the
+ * upper layers.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_pcietopochg_evt_bh(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_fwevt *fwevt)
+{
+ struct _mpi3_event_data_pcie_topology_change_list *event_data =
+ (struct _mpi3_event_data_pcie_topology_change_list *)fwevt->event_data;
+ int i;
+ u16 handle;
+ u8 reason_code;
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+
+ for (i = 0; i < event_data->num_entries; i++) {
+ handle =
+ le16_to_cpu(event_data->port_entry[i].attached_dev_handle);
+ if (!handle)
+ continue;
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+ if (!tgtdev)
+ continue;
+
+ reason_code = event_data->port_entry[i].port_status;
+
+ switch (reason_code) {
+ case MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+ if (tgtdev->host_exposed)
+ mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+ mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+ mpi3mr_tgtdev_put(tgtdev);
+ break;
+ default:
+ break;
+ }
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+ }
+}
+
/**
* mpi3mr_fwevt_bh - Firmware event bottomhalf handler
* @mrioc: Adapter instance reference
@@ -858,6 +969,11 @@ static void mpi3mr_fwevt_bh(struct mpi3mr_ioc *mrioc,
mpi3mr_sastopochg_evt_bh(mrioc, fwevt);
break;
}
+ case MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ {
+ mpi3mr_pcietopochg_evt_bh(mrioc, fwevt);
+ break;
+ }
default:
break;
}
@@ -1161,6 +1277,72 @@ static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle,
clear_bit(cmd_idx, mrioc->devrem_bitmap);
}
+/**
+ * mpi3mr_pcietopochg_evt_th - PCIETopologyChange evt tophalf
+ * @mrioc: Adapter instance reference
+ * @event_reply: event data
+ *
+ * Checks for the reason code and based on that either block I/O
+ * to device, or unblock I/O to the device, or start the device
+ * removal handshake with reason as remove with the firmware for
+ * PCIe devices.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_pcietopochg_evt_th(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_notification_reply *event_reply)
+{
+ struct _mpi3_event_data_pcie_topology_change_list *topo_evt =
+ (struct _mpi3_event_data_pcie_topology_change_list *)event_reply->event_data;
+ int i;
+ u16 handle;
+ u8 reason_code;
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL;
+
+ for (i = 0; i < topo_evt->num_entries; i++) {
+ handle = le16_to_cpu(topo_evt->port_entry[i].attached_dev_handle);
+ if (!handle)
+ continue;
+ reason_code = topo_evt->port_entry[i].port_status;
+ scsi_tgt_priv_data = NULL;
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+ if (tgtdev && tgtdev->starget && tgtdev->starget->hostdata)
+ scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+ tgtdev->starget->hostdata;
+ switch (reason_code) {
+ case MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+ if (scsi_tgt_priv_data) {
+ scsi_tgt_priv_data->dev_removed = 1;
+ scsi_tgt_priv_data->dev_removedelay = 0;
+ atomic_set(&scsi_tgt_priv_data->block_io, 0);
+ }
+ mpi3mr_dev_rmhs_send_tm(mrioc, handle, NULL,
+ MPI3_CTRL_OP_REMOVE_DEVICE);
+ break;
+ case MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
+ if (scsi_tgt_priv_data) {
+ scsi_tgt_priv_data->dev_removedelay = 1;
+ atomic_inc(&scsi_tgt_priv_data->block_io);
+ }
+ break;
+ case MPI3_EVENT_PCIE_TOPO_PS_RESPONDING:
+ if (scsi_tgt_priv_data &&
+ scsi_tgt_priv_data->dev_removedelay) {
+ scsi_tgt_priv_data->dev_removedelay = 0;
+ atomic_dec_if_positive
+ (&scsi_tgt_priv_data->block_io);
+ }
+ break;
+ case MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+ default:
+ break;
+ }
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+ }
+}
+
/**
* mpi3mr_sastopochg_evt_th - SASTopologyChange evt tophalf
* @mrioc: Adapter instance reference
@@ -1354,6 +1536,12 @@ void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
mpi3mr_sastopochg_evt_th(mrioc, event_reply);
break;
}
+ case MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ {
+ process_evt_bh = 1;
+ mpi3mr_pcietopochg_evt_th(mrioc, event_reply);
+ break;
+ }
case MPI3_EVENT_DEVICE_INFO_CHANGED:
{
process_evt_bh = 1;
@@ -1362,6 +1550,7 @@ void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE:
case MPI3_EVENT_SAS_DISCOVERY:
case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+ case MPI3_EVENT_PCIE_ENUMERATION:
break;
default:
ioc_info(mrioc, "%s :event 0x%02x is not handled\n",
@@ -1943,6 +2132,18 @@ static int mpi3mr_slave_configure(struct scsi_device *sdev)
if (!tgt_dev)
return -ENXIO;
+ switch (tgt_dev->dev_type) {
+ case MPI3_DEVICE_DEVFORM_PCIE:
+ /*The block layer hw sector size = 512*/
+ blk_queue_max_hw_sectors(sdev->request_queue,
+ tgt_dev->dev_spec.pcie_inf.mdts / 512);
+ blk_queue_virt_boundary(sdev->request_queue,
+ ((1 << tgt_dev->dev_spec.pcie_inf.pgsz) - 1));
+ break;
+ default:
+ break;
+ }
+
mpi3mr_tgtdev_put(tgt_dev);
return retval;
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 08/24] mpi3mr: add support of event handling part-3
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (6 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 07/24] mpi3mr: add support of event handling pcie devices part-2 Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 09/24] mpi3mr: add support for recovering controller Kashyap Desai
` (15 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 3331 bytes --]
Firmware can report various MPI Events.
Support for certain Events (as listed below) are enabled in the driver
and their processing in driver is covered in this patch.
MPI3_EVENT_SAS_BROADCAST_PRIMITIVE
MPI3_EVENT_CABLE_MGMT
MPI3_EVENT_ENERGY_PACK_CHANGE
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 3 +++
drivers/scsi/mpi3mr/mpi3mr_os.c | 36 +++++++++++++++++++++++++++++++++
2 files changed, 39 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 2b3ab96a06e2..274acba2bcac 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -2728,8 +2728,11 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY);
mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_BROADCAST_PRIMITIVE);
mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST);
mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_ENUMERATION);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_CABLE_MGMT);
+ mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENERGY_PACK_CHANGE);
retval = mpi3mr_issue_event_notification(mrioc);
if (retval) {
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index baaeb2db8a5d..17afe83406f9 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -1484,6 +1484,35 @@ static void mpi3mr_devstatuschg_evt_th(struct mpi3mr_ioc *mrioc,
mpi3mr_tgtdev_put(tgtdev);
}
+/**
+ * mpi3mr_energypackchg_evt_th - Energy pack change evt tophalf
+ * @mrioc: Adapter instance reference
+ * @event_reply: event data
+ *
+ * Identifies the new shutdown timeout value and update.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_energypackchg_evt_th(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_notification_reply *event_reply)
+{
+ struct _mpi3_event_data_energy_pack_change *evtdata =
+ (struct _mpi3_event_data_energy_pack_change *)event_reply->event_data;
+ u16 shutdown_timeout = le16_to_cpu(evtdata->shutdown_timeout);
+
+ if (shutdown_timeout <= 0) {
+ ioc_warn(mrioc,
+ "%s :Invalid Shutdown Timeout received = %d\n",
+ __func__, shutdown_timeout);
+ return;
+ }
+
+ ioc_info(mrioc,
+ "%s :Previous Shutdown Timeout Value = %d New Shutdown Timeout Value = %d\n",
+ __func__, mrioc->facts.shutdown_timeout, shutdown_timeout);
+ mrioc->facts.shutdown_timeout = shutdown_timeout;
+}
+
/**
* mpi3mr_os_handle_events - Firmware event handler
* @mrioc: Adapter instance reference
@@ -1547,9 +1576,16 @@ void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
process_evt_bh = 1;
break;
}
+ case MPI3_EVENT_ENERGY_PACK_CHANGE:
+ {
+ mpi3mr_energypackchg_evt_th(mrioc, event_reply);
+ break;
+ }
case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE:
case MPI3_EVENT_SAS_DISCOVERY:
+ case MPI3_EVENT_CABLE_MGMT:
case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+ case MPI3_EVENT_SAS_BROADCAST_PRIMITIVE:
case MPI3_EVENT_PCIE_ENUMERATION:
break;
default:
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 09/24] mpi3mr: add support for recovering controller
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (7 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 08/24] mpi3mr: add support of event handling part-3 Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 10/24] mpi3mr: add support of timestamp sync with firmware Kashyap Desai
` (14 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 23085 bytes --]
Added h/w defined process of doing controller reset.
The driver on detection of firmware fault or any kind of unresponsiveness
in the controller (Any admin command time outs) results in resetting the
controller. The primary reset mechanisms used are either soft reset or
diag fault reset. Reset is performed if the host sets the ResetAction field
in the HostDiagnostic register to a 001b (Soft Reset) or
007b(diag fault reset). The driver after successfully resetting the
controller reinitialize the controller by going through start of the day
controller initialization procedures.The pending I/Os during the reset are
returned back to SML for retry.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 15 +-
drivers/scsi/mpi3mr/mpi3mr_fw.c | 415 +++++++++++++++++++++++++++++---
drivers/scsi/mpi3mr/mpi3mr_os.c | 90 ++++++-
3 files changed, 478 insertions(+), 42 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 9c6415f736c4..2404f86e2364 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -98,6 +98,7 @@ extern struct list_head mrioc_list;
#define MPI3MR_INTADMCMD_TIMEOUT 10
#define MPI3MR_PORTENABLE_TIMEOUT 300
#define MPI3MR_RESETTM_TIMEOUT 30
+#define MPI3MR_RESET_HOST_IOWAIT_TIMEOUT 5
#define MPI3MR_DEFAULT_SHUTDOWN_TIME 120
#define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */
@@ -630,10 +631,14 @@ struct scmd_priv {
* @dev_handle_bitmap_sz: Device handle bitmap size
* @removepend_bitmap: Remove pending bitmap
* @delayed_rmhs_list: Delayed device removal list
+ * @fault_dbg: Fault debug flag
* @reset_in_progress: Reset in progress flag
* @unrecoverable: Controller unrecoverable flag
+ * @reset_mutex: Controller reset mutex
+ * @reset_waitq: Controller reset wait queue
* @diagsave_timeout: Diagnostic information save timeout
* @logging_level: Controller debug logging level
+ * @flush_io_count: I/O count to flush after reset
* @current_event: Firmware event currently in process
* @driver_info: Driver, Kernel, OS information to firmware
* @change_count: Topology change count
@@ -748,11 +753,15 @@ struct mpi3mr_ioc {
void *removepend_bitmap;
struct list_head delayed_rmhs_list;
+ u8 fault_dbg;
u8 reset_in_progress;
u8 unrecoverable;
+ struct mutex reset_mutex;
+ wait_queue_head_t reset_waitq;
u16 diagsave_timeout;
int logging_level;
+ u16 flush_io_count;
struct mpi3mr_fwevt *current_event;
struct _mpi3_driver_info_layout driver_info;
@@ -801,8 +810,8 @@ struct delayed_dev_rmhs_node {
int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc);
-int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc);
-void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc);
+int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc, u8 re_init);
+void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc, u8 re_init);
int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async);
int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req,
u16 admin_req_sz, u8 ignore_reset);
@@ -828,6 +837,8 @@ void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc);
int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
u32 reset_reason, u8 snapdump);
+int mpi3mr_diagfault_reset_handler(struct mpi3mr_ioc *mrioc,
+ u32 reset_reason);
void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc);
void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc);
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 274acba2bcac..9a0884b897de 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1594,6 +1594,41 @@ void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc)
}
}
+/**
+ * mpi3mr_kill_ioc - Kill the controller
+ * @mrioc: Adapter instance reference
+ * @reason: reason for the failure.
+ *
+ * If fault debug is enabled, display the fault info else issue
+ * diag fault and freeze the system for controller debug
+ * purpose.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_kill_ioc(struct mpi3mr_ioc *mrioc, u32 reason)
+{
+ enum mpi3mr_iocstate ioc_state;
+
+ if (!mrioc->fault_dbg)
+ return;
+
+ dump_stack();
+
+ ioc_state = mpi3mr_get_iocstate(mrioc);
+ if (ioc_state == MRIOC_STATE_FAULT)
+ mpi3mr_print_fault_info(mrioc);
+ else {
+ ioc_err(mrioc, "Firmware is halted due to the reason %d\n",
+ reason);
+ mpi3mr_diagfault_reset_handler(mrioc, reason);
+ }
+ if (mrioc->fault_dbg == 2)
+ for (;;)
+ ;
+ else
+ panic("panic in %s\n", __func__);
+}
+
/**
* mpi3mr_setup_admin_qpair - Setup admin queue pair
* @mrioc: Adapter instance reference
@@ -2550,6 +2585,7 @@ int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc)
/**
* mpi3mr_init_ioc - Initialize the controller
* @mrioc: Adapter instance reference
+ * @re_init: Flag to indicate is this fresh init or re-init
*
* This the controller initialization routine, executed either
* after soft reset or from pci probe callback.
@@ -2562,7 +2598,7 @@ int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc)
*
* Return: 0 on success and non-zero on failure.
*/
-int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
+int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc, u8 re_init)
{
int retval = 0;
enum mpi3mr_iocstate ioc_state;
@@ -2572,13 +2608,16 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
struct _mpi3_ioc_facts_data facts_data;
mrioc->change_count = 0;
- mrioc->cpu_count = num_online_cpus();
- retval = mpi3mr_setup_resources(mrioc);
- if (retval) {
- ioc_err(mrioc, "Failed to setup resources:error %d\n",
- retval);
- goto out_nocleanup;
+ if (!re_init) {
+ mrioc->cpu_count = num_online_cpus();
+ retval = mpi3mr_setup_resources(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to setup resources:error %d\n",
+ retval);
+ goto out_nocleanup;
+ }
}
+
ioc_status = readl(&mrioc->sysif_regs->ioc_status);
ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
@@ -2653,12 +2692,15 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
goto out_failed;
}
- retval = mpi3mr_setup_isr(mrioc, 1);
- if (retval) {
- ioc_err(mrioc, "Failed to setup ISR error %d\n",
- retval);
- goto out_failed;
- }
+ if (!re_init) {
+ retval = mpi3mr_setup_isr(mrioc, 1);
+ if (retval) {
+ ioc_err(mrioc, "Failed to setup ISR error %d\n",
+ retval);
+ goto out_failed;
+ }
+ } else
+ mpi3mr_ioc_enable_intr(mrioc);
retval = mpi3mr_issue_iocfacts(mrioc, &facts_data);
if (retval) {
@@ -2668,11 +2710,13 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
}
mpi3mr_process_factsdata(mrioc, &facts_data);
- retval = mpi3mr_check_reset_dma_mask(mrioc);
- if (retval) {
- ioc_err(mrioc, "Resetting dma mask failed %d\n",
- retval);
- goto out_failed;
+ if (!re_init) {
+ retval = mpi3mr_check_reset_dma_mask(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Resetting dma mask failed %d\n",
+ retval);
+ goto out_failed;
+ }
}
retval = mpi3mr_alloc_reply_sense_bufs(mrioc);
@@ -2683,11 +2727,13 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
goto out_failed;
}
- retval = mpi3mr_alloc_chain_bufs(mrioc);
- if (retval) {
- ioc_err(mrioc, "Failed to allocated chain buffers %d\n",
- retval);
- goto out_failed;
+ if (!re_init) {
+ retval = mpi3mr_alloc_chain_bufs(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "Failed to allocated chain buffers %d\n",
+ retval);
+ goto out_failed;
+ }
}
retval = mpi3mr_issue_iocinit(mrioc);
@@ -2704,11 +2750,13 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
writel(mrioc->sbq_host_index,
&mrioc->sysif_regs->sense_buffer_free_host_index);
- retval = mpi3mr_setup_isr(mrioc, 0);
- if (retval) {
- ioc_err(mrioc, "Failed to re-setup ISR, error %d\n",
- retval);
- goto out_failed;
+ if (!re_init) {
+ retval = mpi3mr_setup_isr(mrioc, 0);
+ if (retval) {
+ ioc_err(mrioc, "Failed to re-setup ISR, error %d\n",
+ retval);
+ goto out_failed;
+ }
}
retval = mpi3mr_create_op_queues(mrioc);
@@ -2718,6 +2766,14 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
goto out_failed;
}
+ if (re_init &&
+ (mrioc->shost->nr_hw_queues > mrioc->num_op_reply_q)) {
+ ioc_err(mrioc,
+ "Cannot create minimum number of OpQueues expected:%d created:%d\n",
+ mrioc->shost->nr_hw_queues, mrioc->num_op_reply_q);
+ goto out_failed;
+ }
+
for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
mrioc->event_masks[i] = -1;
@@ -2741,14 +2797,110 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
goto out_failed;
}
+ if (re_init) {
+ ioc_info(mrioc, "Issuing Port Enable\n");
+ retval = mpi3mr_issue_port_enable(mrioc, 0);
+ if (retval) {
+ ioc_err(mrioc, "Failed to issue port enable %d\n",
+ retval);
+ goto out_failed;
+ }
+ }
return retval;
out_failed:
- mpi3mr_cleanup_ioc(mrioc);
+ mpi3mr_cleanup_ioc(mrioc, re_init);
out_nocleanup:
return retval;
}
+/**
+ * mpi3mr_memset_op_reply_q_buffers - memset the operational reply queue's
+ * segments
+ * @mrioc: Adapter instance reference
+ * @qidx: Operational reply queue index
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_memset_op_reply_q_buffers(struct mpi3mr_ioc *mrioc, u16 qidx)
+{
+ struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx;
+ struct segments *segments;
+ int i, size;
+
+ if (!op_reply_q->q_segments)
+ return;
+
+ size = op_reply_q->segment_qd * mrioc->op_reply_desc_sz;
+ segments = op_reply_q->q_segments;
+ for (i = 0; i < op_reply_q->num_segments; i++)
+ memset(segments[i].segment, 0, size);
+}
+
+/**
+ * mpi3mr_memset_op_req_q_buffers - memset the operational request queue's
+ * segments
+ * @mrioc: Adapter instance reference
+ * @qidx: Operational request queue index
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_memset_op_req_q_buffers(struct mpi3mr_ioc *mrioc, u16 qidx)
+{
+ struct op_req_qinfo *op_req_q = mrioc->req_qinfo + qidx;
+ struct segments *segments;
+ int i, size;
+
+ if (!op_req_q->q_segments)
+ return;
+
+ size = op_req_q->segment_qd * mrioc->facts.op_req_sz;
+ segments = op_req_q->q_segments;
+ for (i = 0; i < op_req_q->num_segments; i++)
+ memset(segments[i].segment, 0, size);
+}
+
+/**
+ * mpi3mr_memset_buffers - memset memory for a controller
+ * @mrioc: Adapter instance reference
+ *
+ * clear all the memory allocated for a controller, typically
+ * called post reset to reuse the memory allocated during the
+ * controller init.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc)
+{
+ u16 i;
+
+ memset(mrioc->admin_req_base, 0, mrioc->admin_req_q_sz);
+ memset(mrioc->admin_reply_base, 0, mrioc->admin_reply_q_sz);
+
+ memset(mrioc->init_cmds.reply, 0, sizeof(*mrioc->init_cmds.reply));
+ for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++)
+ memset(mrioc->dev_rmhs_cmds[i].reply, 0,
+ sizeof(*mrioc->dev_rmhs_cmds[i].reply));
+ memset(mrioc->removepend_bitmap, 0, mrioc->dev_handle_bitmap_sz);
+ memset(mrioc->devrem_bitmap, 0, mrioc->devrem_bitmap_sz);
+
+ for (i = 0; i < mrioc->num_queues; i++) {
+ mrioc->op_reply_qinfo[i].qid = 0;
+ mrioc->op_reply_qinfo[i].ci = 0;
+ mrioc->op_reply_qinfo[i].num_replies = 0;
+ mrioc->op_reply_qinfo[i].ephase = 0;
+ mpi3mr_memset_op_reply_q_buffers(mrioc, i);
+
+ mrioc->req_qinfo[i].ci = 0;
+ mrioc->req_qinfo[i].pi = 0;
+ mrioc->req_qinfo[i].num_requests = 0;
+ mrioc->req_qinfo[i].qid = 0;
+ mrioc->req_qinfo[i].reply_qid = 0;
+ spin_lock_init(&mrioc->req_qinfo[i].q_lock);
+ mpi3mr_memset_op_req_q_buffers(mrioc, i);
+ }
+}
+
/**
* mpi3mr_free_mem - Free memory allocated for a controller
* @mrioc: Adapter instance reference
@@ -2921,6 +3073,7 @@ static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc)
/**
* mpi3mr_cleanup_ioc - Cleanup controller
* @mrioc: Adapter instance reference
+ * @re_init: Cleanup due to a reinit or not
*
* controller cleanup handler, Message unit reset or soft reset
* and shutdown notification is issued to the controller and the
@@ -2928,11 +3081,12 @@ static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc)
*
* Return: Nothing.
*/
-void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc)
+void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc, u8 re_init)
{
enum mpi3mr_iocstate ioc_state;
- mpi3mr_stop_watchdog(mrioc);
+ if (!re_init)
+ mpi3mr_stop_watchdog(mrioc);
mpi3mr_ioc_disable_intr(mrioc);
@@ -2946,11 +3100,93 @@ void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc)
MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET,
MPI3MR_RESET_FROM_MUR_FAILURE);
- mpi3mr_issue_ioc_shutdown(mrioc);
+ if (!re_init)
+ mpi3mr_issue_ioc_shutdown(mrioc);
}
- mpi3mr_free_mem(mrioc);
- mpi3mr_cleanup_resources(mrioc);
+ if (!re_init) {
+ mpi3mr_free_mem(mrioc);
+ mpi3mr_cleanup_resources(mrioc);
+ }
+}
+
+/**
+ * mpi3mr_drv_cmd_comp_reset - Flush a internal driver command
+ * @mrioc: Adapter instance reference
+ * @cmdptr: Internal command tracker
+ *
+ * Complete an internal driver commands with state indicating it
+ * is completed due to reset.
+ *
+ * Return: Nothing.
+ */
+static inline void mpi3mr_drv_cmd_comp_reset(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_drv_cmd *cmdptr)
+{
+ if (cmdptr->state & MPI3MR_CMD_PENDING) {
+ cmdptr->state |= MPI3MR_CMD_RESET;
+ cmdptr->state &= ~MPI3MR_CMD_PENDING;
+ if (cmdptr->is_waiting) {
+ complete(&cmdptr->done);
+ cmdptr->is_waiting = 0;
+ } else if (cmdptr->callback)
+ cmdptr->callback(mrioc, cmdptr);
+ }
+}
+
+/**
+ * mpi3mr_flush_drv_cmds - Flush internaldriver commands
+ * @mrioc: Adapter instance reference
+ *
+ * Flush all internal driver commands post reset
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc)
+{
+ struct mpi3mr_drv_cmd *cmdptr;
+ u8 i;
+
+ cmdptr = &mrioc->init_cmds;
+ mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr);
+
+ for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) {
+ cmdptr = &mrioc->dev_rmhs_cmds[i];
+ mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr);
+ }
+}
+
+/**
+ * mpi3mr_diagfault_reset_handler - Diag fault reset handler
+ * @mrioc: Adapter instance reference
+ * @reset_reason: Reset reason code
+ *
+ * This is an handler for issuing diag fault reset from the
+ * applications through IOCTL path to stop the execution of the
+ * controller
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+int mpi3mr_diagfault_reset_handler(struct mpi3mr_ioc *mrioc,
+ u32 reset_reason)
+{
+ int retval = 0;
+
+ mrioc->reset_in_progress = 1;
+
+ mpi3mr_ioc_disable_intr(mrioc);
+
+ retval = mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason);
+
+ if (retval) {
+ ioc_err(mrioc, "The diag fault reset failed: reason %d\n",
+ reset_reason);
+ mpi3mr_ioc_enable_intr(mrioc);
+ }
+ ioc_info(mrioc, "%s\n", ((retval == 0) ? "SUCCESS" : "FAILED"));
+ mrioc->reset_in_progress = 0;
+ return retval;
}
/**
@@ -2959,12 +3195,119 @@ void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc)
* @reset_reason: Reset reason code
* @snapdump: Flag to generate snapdump in firmware or not
*
- * TBD
+ * This is an handler for recovering controller by issuing soft
+ * reset are diag fault reset. This is a blocking function and
+ * when one reset is executed if any other resets they will be
+ * blocked. All IOCTLs/IO will be blocked during the reset. If
+ * controller reset is successful then the controller will be
+ * reinitalized, otherwise the controller will be marked as not
+ * recoverable
+ *
+ * In snapdump bit is set, the controller is issued with diag
+ * fault reset so that the firmware can create a snap dump and
+ * post that the firmware will result in F000 fault and the
+ * driver will issue soft reset to recover from that.
*
* Return: 0 on success, non-zero on failure.
*/
int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
u32 reset_reason, u8 snapdump)
{
- return 0;
+ int retval = 0, i;
+ unsigned long flags;
+ u32 host_diagnostic, timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10;
+
+ if (mrioc->fault_dbg) {
+ if (snapdump)
+ mpi3mr_set_diagsave(mrioc);
+ mpi3mr_kill_ioc(mrioc, reset_reason);
+ }
+
+ /*
+ * Block new resets until the currently executing one is finished and
+ * return the status of the existing reset for all blocked resets
+ */
+ if (!mutex_trylock(&mrioc->reset_mutex)) {
+ ioc_info(mrioc, "Another reset in progress\n");
+ return -1;
+ }
+ mrioc->reset_in_progress = 1;
+
+ if ((!snapdump) && (reset_reason != MPI3MR_RESET_FROM_FAULT_WATCH) &&
+ (reset_reason != MPI3MR_RESET_FROM_CIACTIV_FAULT)) {
+ for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+ mrioc->event_masks[i] = -1;
+
+ retval = mpi3mr_issue_event_notification(mrioc);
+
+ if (retval) {
+ ioc_err(mrioc,
+ "Failed to turn off events prior to reset %d\n",
+ retval);
+ }
+ }
+
+ mpi3mr_ioc_disable_intr(mrioc);
+
+ if (snapdump) {
+ mpi3mr_set_diagsave(mrioc);
+ retval = mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason);
+ if (!retval) {
+ do {
+ host_diagnostic =
+ readl(&mrioc->sysif_regs->host_diagnostic);
+ if (!(host_diagnostic &
+ MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS))
+ break;
+ msleep(100);
+ } while (--timeout);
+ }
+ }
+
+ retval = mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, reset_reason);
+ if (retval) {
+ ioc_err(mrioc, "Failed to issue soft reset to the ioc\n");
+ goto out;
+ }
+
+ mpi3mr_flush_delayed_rmhs_list(mrioc);
+ mpi3mr_flush_drv_cmds(mrioc);
+ memset(mrioc->devrem_bitmap, 0, mrioc->devrem_bitmap_sz);
+ memset(mrioc->removepend_bitmap, 0, mrioc->dev_handle_bitmap_sz);
+ mpi3mr_cleanup_fwevt_list(mrioc);
+ mpi3mr_flush_host_io(mrioc);
+ mpi3mr_invalidate_devhandles(mrioc);
+ mpi3mr_memset_buffers(mrioc);
+ retval = mpi3mr_init_ioc(mrioc, 1);
+ if (retval) {
+ pr_err(IOCNAME "reinit after soft reset failed: reason %d\n",
+ mrioc->name, reset_reason);
+ goto out;
+ }
+ ssleep(10);
+
+out:
+ if (!retval) {
+ mrioc->reset_in_progress = 0;
+ scsi_unblock_requests(mrioc->shost);
+ mpi3mr_rfresh_tgtdevs(mrioc);
+ spin_lock_irqsave(&mrioc->watchdog_lock, flags);
+ if (mrioc->watchdog_work_q)
+ queue_delayed_work(mrioc->watchdog_work_q,
+ &mrioc->watchdog_work,
+ msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL));
+ spin_unlock_irqrestore(&mrioc->watchdog_lock, flags);
+ } else {
+ mpi3mr_issue_reset(mrioc,
+ MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason);
+ mrioc->unrecoverable = 1;
+ mrioc->reset_in_progress = 0;
+ retval = -1;
+ }
+
+ mutex_unlock(&mrioc->reset_mutex);
+ ioc_info(mrioc, "%s\n", ((retval == 0) ? "SUCCESS" : "FAILED"));
+ return retval;
}
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 17afe83406f9..5f66926935aa 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -310,6 +310,86 @@ void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc)
}
}
+/**
+ * mpi3mr_invalidate_devhandles -Invalidate device handles
+ * @mrioc: Adapter instance reference
+ *
+ * Invalidate the device handles in the target device structures
+ * . Called post reset prior to reinitializing the controller.
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc)
+{
+ struct mpi3mr_tgt_dev *tgtdev;
+ struct mpi3mr_stgt_priv_data *tgt_priv;
+
+ list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) {
+ tgtdev->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+ if (tgtdev->starget && tgtdev->starget->hostdata) {
+ tgt_priv = tgtdev->starget->hostdata;
+ tgt_priv->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+ }
+ }
+}
+
+/**
+ * mpi3mr_flush_scmd - Flush individual SCSI command
+ * @rq: Block request
+ * @data: Adapter instance reference
+ *
+ * Return the SCSI command to the upper layers if it is in LLD
+ * scope.
+ *
+ * Return: true always.
+ */
+
+static bool mpi3mr_flush_scmd(struct request *rq,
+ void *data, bool reserved)
+{
+ struct mpi3mr_ioc *mrioc = (struct mpi3mr_ioc *)data;
+ struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(rq);
+ struct scmd_priv *priv = NULL;
+
+ if (scmd) {
+ priv = scsi_cmd_priv(scmd);
+ if (!priv->in_lld_scope)
+ goto out;
+
+ mpi3mr_clear_scmd_priv(mrioc, scmd);
+ scsi_dma_unmap(scmd);
+ scmd->result = DID_RESET << 16;
+ scsi_print_command(scmd);
+ scmd->scsi_done(scmd);
+ mrioc->flush_io_count++;
+ }
+
+out:
+ return(true);
+}
+
+/**
+ * mpi3mr_flush_host_io - Flush host I/Os
+ * @mrioc: Adapter instance reference
+ *
+ * Flush all of the pending I/Os by calling
+ * blk_mq_tagset_busy_iter() for each possible tag. This is
+ * executed post controller reset
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_flush_host_io(struct mpi3mr_ioc *mrioc)
+{
+ struct Scsi_Host *shost = mrioc->shost;
+
+ mrioc->flush_io_count = 0;
+ ioc_info(mrioc, "%s :Flushing Host I/O cmds post reset\n", __func__);
+ blk_mq_tagset_busy_iter(&shost->tag_set,
+ mpi3mr_flush_scmd, (void *)mrioc);
+ ioc_info(mrioc, "%s :Flushed %d Host I/O cmds\n", __func__,
+ mrioc->flush_io_count);
+}
+
/**
* mpi3mr_alloc_tgtdev - target device allocator
*
@@ -2504,6 +2584,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
INIT_LIST_HEAD(&mrioc->tgtdev_list);
INIT_LIST_HEAD(&mrioc->delayed_rmhs_list);
+ mutex_init(&mrioc->reset_mutex);
mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++)
@@ -2513,6 +2594,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (pdev->revision)
mrioc->enable_segqueue = true;
+ init_waitqueue_head(&mrioc->reset_waitq);
mrioc->logging_level = logging_level;
mrioc->shost = shost;
mrioc->pdev = pdev;
@@ -2537,7 +2619,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
mrioc->is_driver_loading = 1;
- if (mpi3mr_init_ioc(mrioc)) {
+ if (mpi3mr_init_ioc(mrioc, 0)) {
ioc_err(mrioc, "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
retval = -ENODEV;
@@ -2560,7 +2642,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return retval;
addhost_failed:
- mpi3mr_cleanup_ioc(mrioc);
+ mpi3mr_cleanup_ioc(mrioc, 0);
out_iocinit_failed:
destroy_workqueue(mrioc->fwevt_worker_thread);
out_fwevtthread_failed:
@@ -2609,7 +2691,7 @@ static void mpi3mr_remove(struct pci_dev *pdev)
mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
mpi3mr_tgtdev_put(tgtdev);
}
- mpi3mr_cleanup_ioc(mrioc);
+ mpi3mr_cleanup_ioc(mrioc, 0);
spin_lock(&mrioc_list_lock);
list_del(&mrioc->list);
@@ -2649,7 +2731,7 @@ static void mpi3mr_shutdown(struct pci_dev *pdev)
spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
if (wq)
destroy_workqueue(wq);
- mpi3mr_cleanup_ioc(mrioc);
+ mpi3mr_cleanup_ioc(mrioc, 0);
}
static const struct pci_device_id mpi3mr_pci_id_table[] = {
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 10/24] mpi3mr: add support of timestamp sync with firmware
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (8 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 09/24] mpi3mr: add support for recovering controller Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 11/24] mpi3mr: print ioc info for debugging Kashyap Desai
` (13 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 5129 bytes --]
This operation requests that the IOC update the TimeStamp.
When the I/O Unit is powered on, it sets the TimeStamp field value to
0x0000_0000_0000_0000 and increments the current value every millisecond.
A host driver sets the TimeStamp field to the current time by using an
IOCInit request. The TimeStamp field is periodically updated by host
driver.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 3 ++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 74 +++++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 2404f86e2364..89d75d522b30 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -99,6 +99,7 @@ extern struct list_head mrioc_list;
#define MPI3MR_PORTENABLE_TIMEOUT 300
#define MPI3MR_RESETTM_TIMEOUT 30
#define MPI3MR_RESET_HOST_IOWAIT_TIMEOUT 5
+#define MPI3MR_TSUPDATE_INTERVAL 900
#define MPI3MR_DEFAULT_SHUTDOWN_TIME 120
#define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */
@@ -631,6 +632,7 @@ struct scmd_priv {
* @dev_handle_bitmap_sz: Device handle bitmap size
* @removepend_bitmap: Remove pending bitmap
* @delayed_rmhs_list: Delayed device removal list
+ * @ts_update_counter: Timestamp update counter
* @fault_dbg: Fault debug flag
* @reset_in_progress: Reset in progress flag
* @unrecoverable: Controller unrecoverable flag
@@ -753,6 +755,7 @@ struct mpi3mr_ioc {
void *removepend_bitmap;
struct list_head delayed_rmhs_list;
+ u32 ts_update_counter;
u8 fault_dbg;
u8 reset_in_progress;
u8 unrecoverable;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 9a0884b897de..3d834615c77b 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1471,6 +1471,74 @@ int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
return retval;
}
+/**
+ * mpi3mr_sync_timestamp - Issue time stamp sync request
+ * @mrioc: Adapter reference
+ *
+ * Issue IO unit control MPI request to synchornize firmware
+ * timestamp with host time.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_sync_timestamp(struct mpi3mr_ioc *mrioc)
+{
+ ktime_t current_time;
+ struct _mpi3_iounit_control_request iou_ctrl;
+ int retval = 0;
+
+ memset(&iou_ctrl, 0, sizeof(iou_ctrl));
+ mutex_lock(&mrioc->init_cmds.mutex);
+ if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "Issue IOUCTL time_stamp: command is in use\n");
+ mutex_unlock(&mrioc->init_cmds.mutex);
+ goto out;
+ }
+ mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->init_cmds.is_waiting = 1;
+ mrioc->init_cmds.callback = NULL;
+ iou_ctrl.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+ iou_ctrl.function = MPI3_FUNCTION_IO_UNIT_CONTROL;
+ iou_ctrl.operation = MPI3_CTRL_OP_UPDATE_TIMESTAMP;
+ current_time = ktime_get_real();
+ iou_ctrl.param64[0] = cpu_to_le64(ktime_to_ms(current_time));
+
+ init_completion(&mrioc->init_cmds.done);
+ retval = mpi3mr_admin_request_post(mrioc, &iou_ctrl,
+ sizeof(iou_ctrl), 0);
+ if (retval) {
+ ioc_err(mrioc, "Issue IOUCTL time_stamp: Admin Post failed\n");
+ goto out_unlock;
+ }
+
+ wait_for_completion_timeout(&mrioc->init_cmds.done,
+ (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+ if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "Issue IOUCTL time_stamp: command timed out\n");
+ mrioc->init_cmds.is_waiting = 0;
+ mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_TSU_TIMEOUT, 1);
+ retval = -1;
+ goto out_unlock;
+ }
+ if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "Issue IOUCTL time_stamp: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->init_cmds.ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+
+out_unlock:
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->init_cmds.mutex);
+
+out:
+ return retval;
+}
+
/**
* mpi3mr_watchdog_work - watchdog thread to monitor faults
* @work: work struct
@@ -1489,6 +1557,11 @@ static void mpi3mr_watchdog_work(struct work_struct *work)
enum mpi3mr_iocstate ioc_state;
u32 fault, host_diagnostic;
+ if (mrioc->ts_update_counter++ >= MPI3MR_TSUPDATE_INTERVAL) {
+ mrioc->ts_update_counter = 0;
+ mpi3mr_sync_timestamp(mrioc);
+ }
+
/*Check for fault state every one second and issue Soft reset*/
ioc_state = mpi3mr_get_iocstate(mrioc);
if (ioc_state == MRIOC_STATE_FAULT) {
@@ -3293,6 +3366,7 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
mrioc->reset_in_progress = 0;
scsi_unblock_requests(mrioc->shost);
mpi3mr_rfresh_tgtdevs(mrioc);
+ mrioc->ts_update_counter = 0;
spin_lock_irqsave(&mrioc->watchdog_lock, flags);
if (mrioc->watchdog_work_q)
queue_delayed_work(mrioc->watchdog_work_q,
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 11/24] mpi3mr: print ioc info for debugging
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (9 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 10/24] mpi3mr: add support of timestamp sync with firmware Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-14 11:45 ` Hannes Reinecke
2021-05-13 8:35 ` [PATCH v5 12/24] mpi3mr: add bios_param shost template hook Kashyap Desai
` (12 subsequent siblings)
23 siblings, 1 reply; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 4256 bytes --]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 95 +++++++++++++++++++++++++++++++++
drivers/scsi/mpi3mr/mpi3mr_os.c | 1 +
2 files changed, 96 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 3d834615c77b..023b9f6f374b 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -2534,6 +2534,99 @@ int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async)
return retval;
}
+/* Protocol type to name mapper structure*/
+static const struct {
+ u8 protocol;
+ char *name;
+} mpi3mr_protocols[] = {
+ { MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR, "Initiator" },
+ { MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET, "Target" },
+ { MPI3_IOCFACTS_PROTOCOL_NVME, "NVMe attachment" },
+};
+
+/* Capability to name mapper structure*/
+static const struct {
+ u32 capability;
+ char *name;
+} mpi3mr_capabilities[] = {
+ { MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE, "RAID" },
+};
+
+/**
+ * mpi3mr_print_ioc_info - Display controller information
+ * @mrioc: Adapter instance reference
+ *
+ * Display controller personalit, capability, supported
+ * protocols etc.
+ *
+ * Return: Nothing
+ */
+static void
+mpi3mr_print_ioc_info(struct mpi3mr_ioc *mrioc)
+{
+ int i = 0, bytes_wrote = 0;
+ char personality[16];
+ char protocol[50] = {0};
+ char capabilities[100] = {0};
+ bool is_string_nonempty = false;
+ struct mpi3mr_compimg_ver *fwver = &mrioc->facts.fw_ver;
+
+ switch (mrioc->facts.personality) {
+ case MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA:
+ strncpy(personality, "Enhanced HBA", sizeof(personality));
+ break;
+ case MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR:
+ strncpy(personality, "RAID", sizeof(personality));
+ break;
+ default:
+ strncpy(personality, "Unknown", sizeof(personality));
+ break;
+ }
+
+ ioc_info(mrioc, "Running in %s Personality", personality);
+
+ ioc_info(mrioc, "FW version(%d.%d.%d.%d.%d.%d)\n",
+ fwver->gen_major, fwver->gen_minor, fwver->ph_major,
+ fwver->ph_minor, fwver->cust_id, fwver->build_num);
+
+ for (i = 0; i < ARRAY_SIZE(mpi3mr_protocols); i++) {
+ if (mrioc->facts.protocol_flags &
+ mpi3mr_protocols[i].protocol) {
+ if (is_string_nonempty &&
+ (bytes_wrote < sizeof(protocol)))
+ bytes_wrote += snprintf(protocol + bytes_wrote,
+ (sizeof(protocol) - bytes_wrote), ",");
+
+ if (bytes_wrote < sizeof(protocol))
+ bytes_wrote += snprintf(protocol + bytes_wrote,
+ (sizeof(protocol) - bytes_wrote), "%s",
+ mpi3mr_protocols[i].name);
+ is_string_nonempty = true;
+ }
+ }
+
+ bytes_wrote = 0;
+ is_string_nonempty = false;
+ for (i = 0; i < ARRAY_SIZE(mpi3mr_capabilities); i++) {
+ if (mrioc->facts.protocol_flags &
+ mpi3mr_capabilities[i].capability) {
+ if (is_string_nonempty &&
+ (bytes_wrote < sizeof(capabilities)))
+ bytes_wrote += snprintf(capabilities + bytes_wrote,
+ (sizeof(capabilities) - bytes_wrote), ",");
+
+ if (bytes_wrote < sizeof(capabilities))
+ bytes_wrote += snprintf(capabilities + bytes_wrote,
+ (sizeof(capabilities) - bytes_wrote), "%s",
+ mpi3mr_capabilities[i].name);
+ is_string_nonempty = true;
+ }
+ }
+
+ ioc_info(mrioc, "Protocol=(%s), Capabilities=(%s)\n",
+ protocol, capabilities);
+}
+
/**
* mpi3mr_cleanup_resources - Free PCI resources
* @mrioc: Adapter instance reference
@@ -2792,6 +2885,8 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc, u8 re_init)
}
}
+ mpi3mr_print_ioc_info(mrioc);
+
retval = mpi3mr_alloc_reply_sense_bufs(mrioc);
if (retval) {
ioc_err(mrioc,
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 5f66926935aa..d7b6f9417aa8 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -337,6 +337,7 @@ void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc)
* mpi3mr_flush_scmd - Flush individual SCSI command
* @rq: Block request
* @data: Adapter instance reference
+ * @reserved: N/A. Currently not used
*
* Return the SCSI command to the upper layers if it is in LLD
* scope.
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* Re: [PATCH v5 11/24] mpi3mr: print ioc info for debugging
2021-05-13 8:35 ` [PATCH v5 11/24] mpi3mr: print ioc info for debugging Kashyap Desai
@ 2021-05-14 11:45 ` Hannes Reinecke
0 siblings, 0 replies; 38+ messages in thread
From: Hannes Reinecke @ 2021-05-14 11:45 UTC (permalink / raw)
To: Kashyap Desai, linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash
On 5/13/21 10:35 AM, Kashyap Desai wrote:
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> Reviewed-by: Tomas Henzl <thenzl@redhat.com>
> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
>
> Cc: sathya.prakash@broadcom.com
> ---
> drivers/scsi/mpi3mr/mpi3mr_fw.c | 95 +++++++++++++++++++++++++++++++++
> drivers/scsi/mpi3mr/mpi3mr_os.c | 1 +
> 2 files changed, 96 insertions(+)
>
> diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
> index 3d834615c77b..023b9f6f374b 100644
> --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
> +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
> @@ -2534,6 +2534,99 @@ int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async)
> return retval;
> }
>
> +/* Protocol type to name mapper structure*/
> +static const struct {
> + u8 protocol;
> + char *name;
> +} mpi3mr_protocols[] = {
> + { MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR, "Initiator" },
> + { MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET, "Target" },
> + { MPI3_IOCFACTS_PROTOCOL_NVME, "NVMe attachment" },
> +};
> +
> +/* Capability to name mapper structure*/
> +static const struct {
> + u32 capability;
> + char *name;
> +} mpi3mr_capabilities[] = {
> + { MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE, "RAID" },
> +};
> +
> +/**
> + * mpi3mr_print_ioc_info - Display controller information
> + * @mrioc: Adapter instance reference
> + *
> + * Display controller personalit, capability, supported
> + * protocols etc.
> + *
> + * Return: Nothing
> + */
> +static void
> +mpi3mr_print_ioc_info(struct mpi3mr_ioc *mrioc)
> +{
> + int i = 0, bytes_wrote = 0;
> + char personality[16];
> + char protocol[50] = {0};
> + char capabilities[100] = {0};
> + bool is_string_nonempty = false;
> + struct mpi3mr_compimg_ver *fwver = &mrioc->facts.fw_ver;
> +
> + switch (mrioc->facts.personality) {
> + case MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA:
> + strncpy(personality, "Enhanced HBA", sizeof(personality));
> + break;
> + case MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR:
> + strncpy(personality, "RAID", sizeof(personality));
> + break;
> + default:
> + strncpy(personality, "Unknown", sizeof(personality));
> + break;
> + }
> +
> + ioc_info(mrioc, "Running in %s Personality", personality);
> +
> + ioc_info(mrioc, "FW version(%d.%d.%d.%d.%d.%d)\n",
> + fwver->gen_major, fwver->gen_minor, fwver->ph_major,
> + fwver->ph_minor, fwver->cust_id, fwver->build_num);
> +
> + for (i = 0; i < ARRAY_SIZE(mpi3mr_protocols); i++) {
> + if (mrioc->facts.protocol_flags &
> + mpi3mr_protocols[i].protocol) {
> + if (is_string_nonempty &&
> + (bytes_wrote < sizeof(protocol)))
> + bytes_wrote += snprintf(protocol + bytes_wrote,
> + (sizeof(protocol) - bytes_wrote), ",");
> +
> + if (bytes_wrote < sizeof(protocol))
> + bytes_wrote += snprintf(protocol + bytes_wrote,
> + (sizeof(protocol) - bytes_wrote), "%s",
> + mpi3mr_protocols[i].name);
> + is_string_nonempty = true;
> + }
> + }
> +
> + bytes_wrote = 0;
> + is_string_nonempty = false;
> + for (i = 0; i < ARRAY_SIZE(mpi3mr_capabilities); i++) {
> + if (mrioc->facts.protocol_flags &
> + mpi3mr_capabilities[i].capability) {
> + if (is_string_nonempty &&
> + (bytes_wrote < sizeof(capabilities)))
> + bytes_wrote += snprintf(capabilities + bytes_wrote,
> + (sizeof(capabilities) - bytes_wrote), ",");
> +
> + if (bytes_wrote < sizeof(capabilities))
> + bytes_wrote += snprintf(capabilities + bytes_wrote,
> + (sizeof(capabilities) - bytes_wrote), "%s",
> + mpi3mr_capabilities[i].name);
> + is_string_nonempty = true;
> + }
> + }
> +
> + ioc_info(mrioc, "Protocol=(%s), Capabilities=(%s)\n",
> + protocol, capabilities);
> +}
> +
> /**
> * mpi3mr_cleanup_resources - Free PCI resources
> * @mrioc: Adapter instance reference
> @@ -2792,6 +2885,8 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc, u8 re_init)
> }
> }
>
> + mpi3mr_print_ioc_info(mrioc);
> +
> retval = mpi3mr_alloc_reply_sense_bufs(mrioc);
> if (retval) {
> ioc_err(mrioc,
> diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
> index 5f66926935aa..d7b6f9417aa8 100644
> --- a/drivers/scsi/mpi3mr/mpi3mr_os.c
> +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
> @@ -337,6 +337,7 @@ void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc)
> * mpi3mr_flush_scmd - Flush individual SCSI command
> * @rq: Block request
> * @data: Adapter instance reference
> + * @reserved: N/A. Currently not used
> *
> * Return the SCSI command to the upper layers if it is in LLD
> * scope.
>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, 90409 Nürnberg
GF: F. Imendörffer, HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 12/24] mpi3mr: add bios_param shost template hook
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (10 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 11/24] mpi3mr: print ioc info for debugging Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 13/24] mpi3mr: implement scsi error handler hooks Kashyap Desai
` (11 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 1898 bytes --]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_os.c | 41 +++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index d7b6f9417aa8..d3ace6cdd3fd 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -2059,6 +2059,46 @@ static int mpi3mr_build_sg_scmd(struct mpi3mr_ioc *mrioc,
return ret;
}
+/**
+ * mpi3mr_bios_param - BIOS param callback
+ * @sdev: SCSI device reference
+ * @bdev: Block device reference
+ * @capacity: Capacity in logical sectors
+ * @params: Parameter array
+ *
+ * Just the parameters with heads/secots/cylinders.
+ *
+ * Return: 0 always
+ */
+static int mpi3mr_bios_param(struct scsi_device *sdev,
+ struct block_device *bdev, sector_t capacity, int params[])
+{
+ int heads;
+ int sectors;
+ sector_t cylinders;
+ ulong dummy;
+
+ heads = 64;
+ sectors = 32;
+
+ dummy = heads * sectors;
+ cylinders = capacity;
+ sector_div(cylinders, dummy);
+
+ if ((ulong)capacity >= 0x200000) {
+ heads = 255;
+ sectors = 63;
+ dummy = heads * sectors;
+ cylinders = capacity;
+ sector_div(cylinders, dummy);
+ }
+
+ params[0] = heads;
+ params[1] = sectors;
+ params[2] = cylinders;
+ return 0;
+}
+
/**
* mpi3mr_map_queues - Map queues callback handler
* @shost: SCSI host reference
@@ -2502,6 +2542,7 @@ static struct scsi_host_template mpi3mr_driver_template = {
.slave_destroy = mpi3mr_slave_destroy,
.scan_finished = mpi3mr_scan_finished,
.scan_start = mpi3mr_scan_start,
+ .bios_param = mpi3mr_bios_param,
.map_queues = mpi3mr_map_queues,
.no_write_same = 1,
.can_queue = 1,
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 13/24] mpi3mr: implement scsi error handler hooks
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (11 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 12/24] mpi3mr: add bios_param shost template hook Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-14 14:51 ` Tomas Henzl
2021-05-13 8:35 ` [PATCH v5 14/24] mpi3mr: add change queue depth support Kashyap Desai
` (10 subsequent siblings)
23 siblings, 1 reply; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash, hare, thenzl
[-- Attachment #1: Type: text/plain, Size: 15950 bytes --]
SCSI EH hook is added.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
Cc: hare@suse.de
Cc: thenzl@redhat.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 3 +
drivers/scsi/mpi3mr/mpi3mr_fw.c | 35 ++++
drivers/scsi/mpi3mr/mpi3mr_os.c | 347 ++++++++++++++++++++++++++++++++
3 files changed, 385 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 89d75d522b30..d6aab3b04eff 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -97,6 +97,7 @@ extern struct list_head mrioc_list;
/* command/controller interaction timeout definitions in seconds */
#define MPI3MR_INTADMCMD_TIMEOUT 10
#define MPI3MR_PORTENABLE_TIMEOUT 300
+#define MPI3MR_ABORTTM_TIMEOUT 30
#define MPI3MR_RESETTM_TIMEOUT 30
#define MPI3MR_RESET_HOST_IOWAIT_TIMEOUT 5
#define MPI3MR_TSUPDATE_INTERVAL 900
@@ -626,6 +627,7 @@ struct scmd_priv {
* @chain_bitmap_sz: Chain buffer allocator bitmap size
* @chain_bitmap: Chain buffer allocator bitmap
* @chain_buf_lock: Chain buffer list lock
+ * @host_tm_cmds: Command tracker for task management commands
* @dev_rmhs_cmds: Command tracker for device removal commands
* @devrem_bitmap_sz: Device removal bitmap size
* @devrem_bitmap: Device removal bitmap
@@ -748,6 +750,7 @@ struct mpi3mr_ioc {
void *chain_bitmap;
spinlock_t chain_buf_lock;
+ struct mpi3mr_drv_cmd host_tm_cmds;
struct mpi3mr_drv_cmd dev_rmhs_cmds[MPI3MR_NUM_DEVRMCMD];
u16 devrem_bitmap_sz;
void *devrem_bitmap;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 023b9f6f374b..b733a008f81e 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -172,6 +172,8 @@ mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag,
switch (host_tag) {
case MPI3MR_HOSTTAG_INITCMDS:
return &mrioc->init_cmds;
+ case MPI3MR_HOSTTAG_BLK_TMS:
+ return &mrioc->host_tm_cmds;
case MPI3MR_HOSTTAG_INVALID:
if (def_reply && def_reply->function ==
MPI3_FUNCTION_EVENT_NOTIFICATION)
@@ -2033,6 +2035,26 @@ static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc)
goto out_failed;
}
+ mrioc->host_tm_cmds.reply = kzalloc(mrioc->facts.reply_sz, GFP_KERNEL);
+ if (!mrioc->host_tm_cmds.reply)
+ goto out_failed;
+
+ mrioc->dev_handle_bitmap_sz = mrioc->facts.max_devhandle / 8;
+ if (mrioc->facts.max_devhandle % 8)
+ mrioc->dev_handle_bitmap_sz++;
+ mrioc->removepend_bitmap = kzalloc(mrioc->dev_handle_bitmap_sz,
+ GFP_KERNEL);
+ if (!mrioc->removepend_bitmap)
+ goto out_failed;
+
+ mrioc->devrem_bitmap_sz = MPI3MR_NUM_DEVRMCMD / 8;
+ if (MPI3MR_NUM_DEVRMCMD % 8)
+ mrioc->devrem_bitmap_sz++;
+ mrioc->devrem_bitmap = kzalloc(mrioc->devrem_bitmap_sz,
+ GFP_KERNEL);
+ if (!mrioc->devrem_bitmap)
+ goto out_failed;
+
mrioc->num_reply_bufs = mrioc->facts.max_reqs + MPI3MR_NUM_EVT_REPLIES;
mrioc->reply_free_qsz = mrioc->num_reply_bufs + 1;
mrioc->num_sense_bufs = mrioc->facts.max_reqs / MPI3MR_SENSEBUF_FACTOR;
@@ -3046,6 +3068,8 @@ static void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc)
memset(mrioc->admin_reply_base, 0, mrioc->admin_reply_q_sz);
memset(mrioc->init_cmds.reply, 0, sizeof(*mrioc->init_cmds.reply));
+ memset(mrioc->host_tm_cmds.reply, 0,
+ sizeof(*mrioc->host_tm_cmds.reply));
for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++)
memset(mrioc->dev_rmhs_cmds[i].reply, 0,
sizeof(*mrioc->dev_rmhs_cmds[i].reply));
@@ -3139,6 +3163,15 @@ static void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
kfree(mrioc->init_cmds.reply);
mrioc->init_cmds.reply = NULL;
+ kfree(mrioc->host_tm_cmds.reply);
+ mrioc->host_tm_cmds.reply = NULL;
+
+ kfree(mrioc->removepend_bitmap);
+ mrioc->removepend_bitmap = NULL;
+
+ kfree(mrioc->devrem_bitmap);
+ mrioc->devrem_bitmap = NULL;
+
kfree(mrioc->chain_bitmap);
mrioc->chain_bitmap = NULL;
@@ -3317,6 +3350,8 @@ static void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc)
cmdptr = &mrioc->init_cmds;
mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr);
+ cmdptr = &mrioc->host_tm_cmds;
+ mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr);
for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) {
cmdptr = &mrioc->dev_rmhs_cmds[i];
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index d3ace6cdd3fd..d3eedc2ac410 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -2059,6 +2059,212 @@ static int mpi3mr_build_sg_scmd(struct mpi3mr_ioc *mrioc,
return ret;
}
+/**
+ * mpi3mr_print_response_code - print TM response as a string
+ * @mrioc: Adapter instance reference
+ * @resp_code: TM response code
+ *
+ * Print TM response code as a readable string.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_print_response_code(struct mpi3mr_ioc *mrioc, u8 resp_code)
+{
+ char *desc;
+
+ switch (resp_code) {
+ case MPI3MR_RSP_TM_COMPLETE:
+ desc = "task management request completed";
+ break;
+ case MPI3MR_RSP_INVALID_FRAME:
+ desc = "invalid frame";
+ break;
+ case MPI3MR_RSP_TM_NOT_SUPPORTED:
+ desc = "task management request not supported";
+ break;
+ case MPI3MR_RSP_TM_FAILED:
+ desc = "task management request failed";
+ break;
+ case MPI3MR_RSP_TM_SUCCEEDED:
+ desc = "task management request succeeded";
+ break;
+ case MPI3MR_RSP_TM_INVALID_LUN:
+ desc = "invalid lun";
+ break;
+ case MPI3MR_RSP_TM_OVERLAPPED_TAG:
+ desc = "overlapped tag attempted";
+ break;
+ case MPI3MR_RSP_IO_QUEUED_ON_IOC:
+ desc = "task queued, however not sent to target";
+ break;
+ default:
+ desc = "unknown";
+ break;
+ }
+ ioc_info(mrioc, "%s :response_code(0x%01x): %s\n", __func__,
+ resp_code, desc);
+}
+
+/**
+ * mpi3mr_issue_tm - Issue Task Management request
+ * @mrioc: Adapter instance reference
+ * @tm_type: Task Management type
+ * @handle: Device handle
+ * @lun: lun ID
+ * @htag: Host tag of the TM request
+ * @drv_cmd: Internal command tracker
+ * @resp_code: Response code place holder
+ * @cmd_priv: SCSI command private data
+ *
+ * Issues a Task Management Request to the controller for a
+ * specified target, lun and command and wait for its completion
+ * and check TM response. Recover the TM if it timed out by
+ * issuing controller reset.
+ *
+ * Return: 0 on success, non-zero on errors
+ */
+static int mpi3mr_issue_tm(struct mpi3mr_ioc *mrioc, u8 tm_type,
+ u16 handle, uint lun, u16 htag, ulong timeout,
+ struct mpi3mr_drv_cmd *drv_cmd,
+ u8 *resp_code, struct scmd_priv *cmd_priv)
+{
+ struct _mpi3_scsi_task_mgmt_request tm_req;
+ struct _mpi3_scsi_task_mgmt_reply *tm_reply = NULL;
+ int retval = 0;
+ struct mpi3mr_tgt_dev *tgtdev = NULL;
+ struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL;
+ struct op_req_qinfo *op_req_q = NULL;
+
+ ioc_info(mrioc, "%s :Issue TM: TM type (0x%x) for devhandle 0x%04x\n",
+ __func__, tm_type, handle);
+ if (mrioc->unrecoverable) {
+ retval = -1;
+ ioc_err(mrioc, "%s :Issue TM: Unrecoverable controller\n",
+ __func__);
+ goto out;
+ }
+
+ memset(&tm_req, 0, sizeof(tm_req));
+ mutex_lock(&drv_cmd->mutex);
+ if (drv_cmd->state & MPI3MR_CMD_PENDING) {
+ retval = -1;
+ ioc_err(mrioc, "%s :Issue TM: Command is in use\n", __func__);
+ mutex_unlock(&drv_cmd->mutex);
+ goto out;
+ }
+ if (mrioc->reset_in_progress) {
+ retval = -1;
+ ioc_err(mrioc, "%s :Issue TM: Reset in progress\n", __func__);
+ mutex_unlock(&drv_cmd->mutex);
+ goto out;
+ }
+
+ drv_cmd->state = MPI3MR_CMD_PENDING;
+ drv_cmd->is_waiting = 1;
+ drv_cmd->callback = NULL;
+ tm_req.dev_handle = cpu_to_le16(handle);
+ tm_req.task_type = tm_type;
+ tm_req.host_tag = cpu_to_le16(htag);
+
+ int_to_scsilun(lun, (struct scsi_lun *)tm_req.lun);
+ tm_req.function = MPI3_FUNCTION_SCSI_TASK_MGMT;
+
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+ if (tgtdev && tgtdev->starget && tgtdev->starget->hostdata) {
+ scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+ tgtdev->starget->hostdata;
+ atomic_inc(&scsi_tgt_priv_data->block_io);
+ }
+ if (cmd_priv) {
+ op_req_q = &mrioc->req_qinfo[cmd_priv->req_q_idx];
+ tm_req.task_host_tag = cpu_to_le16(cmd_priv->host_tag);
+ tm_req.task_request_queue_id = cpu_to_le16(op_req_q->qid);
+ }
+ if (tgtdev && (tgtdev->dev_type == MPI3_DEVICE_DEVFORM_PCIE)) {
+ if (cmd_priv && tgtdev->dev_spec.pcie_inf.abort_to)
+ timeout = tgtdev->dev_spec.pcie_inf.abort_to;
+ else if (!cmd_priv && tgtdev->dev_spec.pcie_inf.reset_to)
+ timeout = tgtdev->dev_spec.pcie_inf.reset_to;
+ }
+
+ init_completion(&drv_cmd->done);
+ retval = mpi3mr_admin_request_post(mrioc, &tm_req, sizeof(tm_req), 1);
+ if (retval) {
+ ioc_err(mrioc, "%s :Issue TM: Admin Post failed\n", __func__);
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&drv_cmd->done, (timeout * HZ));
+
+ if (!(drv_cmd->state & MPI3MR_CMD_COMPLETE)) {
+ ioc_err(mrioc, "%s :Issue TM: command timed out\n", __func__);
+ drv_cmd->is_waiting = 0;
+ retval = -1;
+ mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_TM_TIMEOUT, 1);
+ goto out_unlock;
+ }
+
+ if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID)
+ tm_reply = (struct _mpi3_scsi_task_mgmt_reply *)drv_cmd->reply;
+
+ if (drv_cmd->ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+ ioc_err(mrioc,
+ "%s :Issue TM: handle(0x%04x) Failed ioc_status(0x%04x) Loginfo(0x%08x)\n",
+ __func__, handle, drv_cmd->ioc_status,
+ drv_cmd->ioc_loginfo);
+ retval = -1;
+ goto out_unlock;
+ }
+
+ if (!tm_reply) {
+ ioc_err(mrioc, "%s :Issue TM: No TM Reply message\n", __func__);
+ retval = -1;
+ goto out_unlock;
+ }
+
+ *resp_code = le32_to_cpu(tm_reply->response_data) &
+ MPI3MR_RI_MASK_RESPCODE;
+ switch (*resp_code) {
+ case MPI3MR_RSP_TM_SUCCEEDED:
+ case MPI3MR_RSP_TM_COMPLETE:
+ break;
+ case MPI3MR_RSP_IO_QUEUED_ON_IOC:
+ if (tm_type != MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
+ retval = -1;
+ break;
+ default:
+ retval = -1;
+ break;
+ }
+
+ ioc_info(mrioc,
+ "%s :Issue TM: Completed TM type (0x%x) handle(0x%04x) ",
+ __func__, tm_type, handle);
+ ioc_info(mrioc,
+ "with ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
+ drv_cmd->ioc_status, drv_cmd->ioc_loginfo,
+ le32_to_cpu(tm_reply->termination_count));
+ mpi3mr_print_response_code(mrioc, *resp_code);
+
+out_unlock:
+ drv_cmd->state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&drv_cmd->mutex);
+ if (scsi_tgt_priv_data)
+ atomic_dec_if_positive(&scsi_tgt_priv_data->block_io);
+ if (tgtdev)
+ mpi3mr_tgtdev_put(tgtdev);
+ if (!retval) {
+ /*
+ * Flush all IRQ handlers by calling synchronize_irq().
+ * mpi3mr_ioc_disable_intr() takes care of it.
+ */
+ mpi3mr_ioc_disable_intr(mrioc);
+ mpi3mr_ioc_enable_intr(mrioc);
+ }
+out:
+ return retval;
+}
+
/**
* mpi3mr_bios_param - BIOS param callback
* @sdev: SCSI device reference
@@ -2116,6 +2322,143 @@ static int mpi3mr_map_queues(struct Scsi_Host *shost)
mrioc->pdev, mrioc->op_reply_q_offset);
}
+/**
+ * mpi3mr_eh_host_reset - Host reset error handling callback
+ * @scmd: SCSI command reference
+ *
+ * Issue controller reset if the scmd is for a Physical Device,
+ * if the scmd is for RAID volume, then wait for
+ * MPI3MR_RAID_ERRREC_RESET_TIMEOUT and checke whether any
+ * pending I/Os prior to issuing reset to the controller.
+ *
+ * Return: SUCCESS of successful reset else FAILED
+ */
+static int mpi3mr_eh_host_reset(struct scsi_cmnd *scmd)
+{
+ struct mpi3mr_ioc *mrioc = shost_priv(scmd->device->host);
+ int retval = FAILED, ret;
+
+ ret = mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_EH_HOS, 1);
+ if (ret)
+ goto out;
+
+ retval = SUCCESS;
+out:
+ sdev_printk(KERN_INFO, scmd->device,
+ "Host reset is %s for scmd(%p)\n",
+ ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+ return retval;
+}
+
+/**
+ * mpi3mr_eh_target_reset - Target reset error handling callback
+ * @scmd: SCSI command reference
+ *
+ * Issue Target reset Task Management and verify the scmd is
+ * terminated successfully and return status accordingly.
+ *
+ * Return: SUCCESS of successful termination of the scmd else
+ * FAILED
+ */
+static int mpi3mr_eh_target_reset(struct scsi_cmnd *scmd)
+{
+ struct mpi3mr_ioc *mrioc = shost_priv(scmd->device->host);
+ struct mpi3mr_stgt_priv_data *stgt_priv_data;
+ struct mpi3mr_sdev_priv_data *sdev_priv_data;
+ u16 dev_handle;
+ u8 resp_code = 0;
+ int retval = FAILED, ret = 0;
+
+ sdev_printk(KERN_INFO, scmd->device,
+ "Attempting Target Reset! scmd(%p)\n", scmd);
+ scsi_print_command(scmd);
+
+ sdev_priv_data = scmd->device->hostdata;
+ if (!sdev_priv_data || !sdev_priv_data->tgt_priv_data) {
+ sdev_printk(KERN_INFO, scmd->device,
+ "SCSI device is not available\n");
+ retval = SUCCESS;
+ goto out;
+ }
+
+ stgt_priv_data = sdev_priv_data->tgt_priv_data;
+ dev_handle = stgt_priv_data->dev_handle;
+ sdev_printk(KERN_INFO, scmd->device,
+ "Target Reset is issued to handle(0x%04x)\n",
+ dev_handle);
+
+ ret = mpi3mr_issue_tm(mrioc,
+ MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET, dev_handle,
+ sdev_priv_data->lun_id, MPI3MR_HOSTTAG_BLK_TMS,
+ MPI3MR_RESETTM_TIMEOUT, &mrioc->host_tm_cmds, &resp_code, NULL);
+
+ if (ret)
+ goto out;
+
+ retval = SUCCESS;
+out:
+ sdev_printk(KERN_INFO, scmd->device,
+ "Target reset is %s for scmd(%p)\n",
+ ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+ return retval;
+}
+
+/**
+ * mpi3mr_eh_dev_reset- Device reset error handling callback
+ * @scmd: SCSI command reference
+ *
+ * Issue lun reset Task Management and verify the scmd is
+ * terminated successfully and return status accordingly.
+ *
+ * Return: SUCCESS of successful termination of the scmd else
+ * FAILED
+ */
+static int mpi3mr_eh_dev_reset(struct scsi_cmnd *scmd)
+{
+ struct mpi3mr_ioc *mrioc = shost_priv(scmd->device->host);
+ struct mpi3mr_stgt_priv_data *stgt_priv_data;
+ struct mpi3mr_sdev_priv_data *sdev_priv_data;
+ u16 dev_handle;
+ u8 resp_code = 0;
+ int retval = FAILED, ret = 0;
+
+ sdev_printk(KERN_INFO, scmd->device,
+ "Attempting Device(lun) Reset! scmd(%p)\n", scmd);
+ scsi_print_command(scmd);
+
+ sdev_priv_data = scmd->device->hostdata;
+ if (!sdev_priv_data || !sdev_priv_data->tgt_priv_data) {
+ sdev_printk(KERN_INFO, scmd->device,
+ "SCSI device is not available\n");
+ retval = SUCCESS;
+ goto out;
+ }
+
+ stgt_priv_data = sdev_priv_data->tgt_priv_data;
+ dev_handle = stgt_priv_data->dev_handle;
+ sdev_printk(KERN_INFO, scmd->device,
+ "Device(lun) Reset is issued to handle(0x%04x)\n", dev_handle);
+
+ ret = mpi3mr_issue_tm(mrioc,
+ MPI3_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, dev_handle,
+ sdev_priv_data->lun_id, MPI3MR_HOSTTAG_BLK_TMS,
+ MPI3MR_RESETTM_TIMEOUT, &mrioc->host_tm_cmds, &resp_code, NULL);
+
+ if (ret)
+ goto out;
+
+ retval = SUCCESS;
+out:
+ sdev_printk(KERN_INFO, scmd->device,
+ "Device(lun) reset is %s for scmd(%p)\n",
+ ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+ return retval;
+}
+
/**
* mpi3mr_scan_start - Scan start callback handler
* @shost: SCSI host reference
@@ -2542,6 +2885,9 @@ static struct scsi_host_template mpi3mr_driver_template = {
.slave_destroy = mpi3mr_slave_destroy,
.scan_finished = mpi3mr_scan_finished,
.scan_start = mpi3mr_scan_start,
+ .eh_device_reset_handler = mpi3mr_eh_dev_reset,
+ .eh_target_reset_handler = mpi3mr_eh_target_reset,
+ .eh_host_reset_handler = mpi3mr_eh_host_reset,
.bios_param = mpi3mr_bios_param,
.map_queues = mpi3mr_map_queues,
.no_write_same = 1,
@@ -2628,6 +2974,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mutex_init(&mrioc->reset_mutex);
mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
+ mpi3mr_init_drv_cmd(&mrioc->host_tm_cmds, MPI3MR_HOSTTAG_BLK_TMS);
for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++)
mpi3mr_init_drv_cmd(&mrioc->dev_rmhs_cmds[i],
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* Re: [PATCH v5 13/24] mpi3mr: implement scsi error handler hooks
2021-05-13 8:35 ` [PATCH v5 13/24] mpi3mr: implement scsi error handler hooks Kashyap Desai
@ 2021-05-14 14:51 ` Tomas Henzl
0 siblings, 0 replies; 38+ messages in thread
From: Tomas Henzl @ 2021-05-14 14:51 UTC (permalink / raw)
To: Kashyap Desai, linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, sathya.prakash, hare
On 5/13/21 10:35 AM, Kashyap Desai wrote:
> SCSI EH hook is added.
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> Reviewed-by: Hannes Reinecke <hare@suse.de>
> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Regards,
Tomas
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 14/24] mpi3mr: add change queue depth support
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (12 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 13/24] mpi3mr: implement scsi error handler hooks Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:35 ` [PATCH v5 15/24] mpi3mr: allow certain commands during pci-remove hook Kashyap Desai
` (9 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 3004 bytes --]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 3 +++
drivers/scsi/mpi3mr/mpi3mr_os.c | 30 ++++++++++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index d6aab3b04eff..960943452a7a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -141,6 +141,9 @@ extern struct list_head mrioc_list;
/* Command retry count definitions */
#define MPI3MR_DEV_RMHS_RETRY_COUNT 3
+/* Default target device queue depth */
+#define MPI3MR_DEFAULT_SDEV_QD 32
+
/* SGE Flag definition */
#define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index d3eedc2ac410..786128da1b54 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -643,6 +643,33 @@ static int mpi3mr_report_tgtdev_to_host(struct mpi3mr_ioc *mrioc,
return retval;
}
+/**
+ * mpi3mr_change_queue_depth- Change QD callback handler
+ * @sdev: SCSI device reference
+ * @q_depth: Queue depth
+ *
+ * Validate and limit QD and call scsi_change_queue_depth.
+ *
+ * Return: return value of scsi_change_queue_depth
+ */
+static int mpi3mr_change_queue_depth(struct scsi_device *sdev,
+ int q_depth)
+{
+ struct scsi_target *starget = scsi_target(sdev);
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ int retval = 0;
+
+ if (!sdev->tagged_supported)
+ q_depth = 1;
+ if (q_depth > shost->can_queue)
+ q_depth = shost->can_queue;
+ else if (!q_depth)
+ q_depth = MPI3MR_DEFAULT_SDEV_QD;
+ retval = scsi_change_queue_depth(sdev, q_depth);
+
+ return retval;
+}
+
/**
* mpi3mr_update_sdev - Update SCSI device information
* @sdev: SCSI device reference
@@ -663,6 +690,7 @@ mpi3mr_update_sdev(struct scsi_device *sdev, void *data)
if (!tgtdev)
return;
+ mpi3mr_change_queue_depth(sdev, tgtdev->q_depth);
switch (tgtdev->dev_type) {
case MPI3_DEVICE_DEVFORM_PCIE:
/*The block layer hw sector size = 512*/
@@ -2632,6 +2660,7 @@ static int mpi3mr_slave_configure(struct scsi_device *sdev)
if (!tgt_dev)
return -ENXIO;
+ mpi3mr_change_queue_depth(sdev, tgt_dev->q_depth);
switch (tgt_dev->dev_type) {
case MPI3_DEVICE_DEVFORM_PCIE:
/*The block layer hw sector size = 512*/
@@ -2885,6 +2914,7 @@ static struct scsi_host_template mpi3mr_driver_template = {
.slave_destroy = mpi3mr_slave_destroy,
.scan_finished = mpi3mr_scan_finished,
.scan_start = mpi3mr_scan_start,
+ .change_queue_depth = mpi3mr_change_queue_depth,
.eh_device_reset_handler = mpi3mr_eh_dev_reset,
.eh_target_reset_handler = mpi3mr_eh_target_reset,
.eh_host_reset_handler = mpi3mr_eh_host_reset,
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 15/24] mpi3mr: allow certain commands during pci-remove hook
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (13 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 14/24] mpi3mr: add change queue depth support Kashyap Desai
@ 2021-05-13 8:35 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 16/24] mpi3mr: hardware workaround for UNMAP commands to nvme drives Kashyap Desai
` (8 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:35 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 1633 bytes --]
This patch allows SSU and Sync Cache commands to be sent to the controller
instead of driver returning DID_NO_CONNECT during driver unload to flush
any cached data from the drive.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_os.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 786128da1b54..992a0e4d37d1 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -2776,6 +2776,26 @@ static int mpi3mr_target_alloc(struct scsi_target *starget)
return retval;
}
+/**
+ * mpi3mr_allow_scmd_to_fw - Command is allowed during shutdown
+ * @scmd: SCSI Command reference
+ *
+ * Checks whether a cdb is allowed during shutdown or not.
+ *
+ * Return: TRUE for allowed commands, FALSE otherwise.
+ */
+
+inline bool mpi3mr_allow_scmd_to_fw(struct scsi_cmnd *scmd)
+{
+ switch (scmd->cmnd[0]) {
+ case SYNCHRONIZE_CACHE:
+ case START_STOP:
+ return true;
+ default:
+ return false;
+ }
+}
+
/**
* mpi3mr_qcmd - I/O request despatcher
* @shost: SCSI Host reference
@@ -2811,7 +2831,8 @@ static int mpi3mr_qcmd(struct Scsi_Host *shost,
goto out;
}
- if (mrioc->stop_drv_processing) {
+ if (mrioc->stop_drv_processing &&
+ !(mpi3mr_allow_scmd_to_fw(scmd))) {
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
goto out;
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 16/24] mpi3mr: hardware workaround for UNMAP commands to nvme drives
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (14 preceding siblings ...)
2021-05-13 8:35 ` [PATCH v5 15/24] mpi3mr: allow certain commands during pci-remove hook Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 17/24] mpi3mr: add support of threaded isr Kashyap Desai
` (7 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 4028 bytes --]
The controller hardware can not handle certain unmap commands for NVMe
drives, this patch adds support in the driver to check those commands and
handle as appropriate.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_os.c | 100 ++++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 992a0e4d37d1..ad3390e02034 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -2776,6 +2776,101 @@ static int mpi3mr_target_alloc(struct scsi_target *starget)
return retval;
}
+/**
+ * mpi3mr_check_return_unmap - Whether an unmap is allowed
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI Command reference
+ *
+ * The controller hardware cannot handle certain unmap commands
+ * for NVMe drives, this routine checks those and return true
+ * and completes the SCSI command with proper status and sense
+ * data.
+ *
+ * Return: TRUE for not allowed unmap, FALSE otherwise.
+ */
+static bool mpi3mr_check_return_unmap(struct mpi3mr_ioc *mrioc,
+ struct scsi_cmnd *scmd)
+{
+ unsigned char *buf;
+ u16 param_len, desc_len;
+
+ param_len = get_unaligned_be16(scmd->cmnd + 7);
+
+ if (!param_len) {
+ ioc_warn(mrioc,
+ "%s: cdb received with zero parameter length\n",
+ __func__);
+ scsi_print_command(scmd);
+ scmd->result = DID_OK << 16;
+ scmd->scsi_done(scmd);
+ return true;
+ }
+
+ if (param_len < 24) {
+ ioc_warn(mrioc,
+ "%s: cdb received with invalid param_len: %d\n",
+ __func__, param_len);
+ scsi_print_command(scmd);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x1A, 0);
+ scmd->scsi_done(scmd);
+ return true;
+ }
+ if (param_len != scsi_bufflen(scmd)) {
+ ioc_warn(mrioc,
+ "%s: cdb received with param_len: %d bufflen: %d\n",
+ __func__, param_len, scsi_bufflen(scmd));
+ scsi_print_command(scmd);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x1A, 0);
+ scmd->scsi_done(scmd);
+ return true;
+ }
+ buf = kzalloc(scsi_bufflen(scmd), GFP_ATOMIC);
+ if (!buf) {
+ scsi_print_command(scmd);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x55, 0x03);
+ scmd->scsi_done(scmd);
+ return true;
+ }
+ scsi_sg_copy_to_buffer(scmd, buf, scsi_bufflen(scmd));
+ desc_len = get_unaligned_be16(&buf[2]);
+
+ if (desc_len < 16) {
+ ioc_warn(mrioc,
+ "%s: Invalid descriptor length in param list: %d\n",
+ __func__, desc_len);
+ scsi_print_command(scmd);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x26, 0);
+ scmd->scsi_done(scmd);
+ kfree(buf);
+ return true;
+ }
+
+ if (param_len > (desc_len + 8)) {
+ scsi_print_command(scmd);
+ ioc_warn(mrioc,
+ "%s: Truncating param_len(%d) to desc_len+8(%d)\n",
+ __func__, param_len, (desc_len + 8));
+ param_len = desc_len + 8;
+ put_unaligned_be16(param_len, scmd->cmnd + 7);
+ scsi_print_command(scmd);
+ }
+
+ kfree(buf);
+ return false;
+}
+
/**
* mpi3mr_allow_scmd_to_fw - Command is allowed during shutdown
* @scmd: SCSI Command reference
@@ -2867,6 +2962,11 @@ static int mpi3mr_qcmd(struct Scsi_Host *shost,
goto out;
}
+ if ((scmd->cmnd[0] == UNMAP) &&
+ (stgt_priv_data->dev_type == MPI3_DEVICE_DEVFORM_PCIE) &&
+ mpi3mr_check_return_unmap(mrioc, scmd))
+ goto out;
+
host_tag = mpi3mr_host_tag_for_scmd(mrioc, scmd);
if (host_tag == MPI3MR_HOSTTAG_INVALID) {
scmd->result = DID_ERROR << 16;
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 17/24] mpi3mr: add support of threaded isr
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (15 preceding siblings ...)
2021-05-13 8:36 ` [PATCH v5 16/24] mpi3mr: hardware workaround for UNMAP commands to nvme drives Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 18/24] mpi3mr: add complete support of soft reset Kashyap Desai
` (6 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 8203 bytes --]
Register driver for threaded interrupt.
By default, driver will attempt io completion from interrupt context
(primary handler). Since driver tracks per reply queue outstanding ios,
it will schedule threaded ISR if there are any outstanding IOs expected
on that particular reply queue. Threaded ISR (secondary handler) will loop
for IO completion as long as there are outstanding IOs
(speculative method using same per reply queue outstanding counter)
or it has completed some X amount of commands (something like budget).
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 12 +++++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 79 +++++++++++++++++++++++++++++++--
2 files changed, 88 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 960943452a7a..9f16e80af06f 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -144,6 +144,10 @@ extern struct list_head mrioc_list;
/* Default target device queue depth */
#define MPI3MR_DEFAULT_SDEV_QD 32
+/* Definitions for Threaded IRQ poll*/
+#define MPI3MR_IRQ_POLL_SLEEP 2
+#define MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT 8
+
/* SGE Flag definition */
#define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
@@ -295,6 +299,9 @@ struct op_req_qinfo {
* @q_segment_list: Segment list base virtual address
* @q_segment_list_dma: Segment list base DMA address
* @ephase: Expected phased identifier for the reply queue
+ * @pend_ios: Number of IOs pending in HW for this queue
+ * @enable_irq_poll: Flag to indicate polling is enabled
+ * @in_use: Queue is handled by poll/ISR
*/
struct op_reply_qinfo {
u16 ci;
@@ -306,6 +313,9 @@ struct op_reply_qinfo {
void *q_segment_list;
dma_addr_t q_segment_list_dma;
u8 ephase;
+ atomic_t pend_ios;
+ bool enable_irq_poll;
+ atomic_t in_use;
};
/**
@@ -557,6 +567,7 @@ struct scmd_priv {
* @shost: Scsi_Host pointer
* @id: Controller ID
* @cpu_count: Number of online CPUs
+ * @irqpoll_sleep: usleep unit used in threaded isr irqpoll
* @name: Controller ASCII name
* @driver_name: Driver ASCII name
* @sysif_regs: System interface registers virtual address
@@ -658,6 +669,7 @@ struct mpi3mr_ioc {
u8 id;
int cpu_count;
bool enable_segqueue;
+ u32 irqpoll_sleep;
char name[MPI3MR_NAME_LENGTH];
char driver_name[MPI3MR_NAME_LENGTH];
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index b733a008f81e..176e8a2c658d 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -345,12 +345,16 @@ static int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
reply_qidx = op_reply_q->qid - 1;
+ if (!atomic_add_unless(&op_reply_q->in_use, 1, 1))
+ return 0;
+
exp_phase = op_reply_q->ephase;
reply_ci = op_reply_q->ci;
reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci);
if ((le16_to_cpu(reply_desc->reply_flags) &
MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) {
+ atomic_dec(&op_reply_q->in_use);
return 0;
}
@@ -361,6 +365,7 @@ static int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
WRITE_ONCE(op_req_q->ci, le16_to_cpu(reply_desc->request_queue_ci));
mpi3mr_process_op_reply_desc(mrioc, reply_desc, &reply_dma,
reply_qidx);
+ atomic_dec(&op_reply_q->pend_ios);
if (reply_dma)
mpi3mr_repost_reply_buf(mrioc, reply_dma);
num_op_reply++;
@@ -375,6 +380,14 @@ static int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
if ((le16_to_cpu(reply_desc->reply_flags) &
MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase)
break;
+ /*
+ * Exit completion loop to avoid CPU lockup
+ * Ensure remaining completion happens from threaded ISR.
+ */
+ if (num_op_reply > mrioc->max_host_ios) {
+ intr_info->op_reply_q->enable_irq_poll = true;
+ break;
+ }
} while (1);
@@ -383,6 +396,7 @@ static int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
op_reply_q->ci = reply_ci;
op_reply_q->ephase = exp_phase;
+ atomic_dec(&op_reply_q->in_use);
return num_op_reply;
}
@@ -391,7 +405,7 @@ static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata)
struct mpi3mr_intr_info *intr_info = privdata;
struct mpi3mr_ioc *mrioc;
u16 midx;
- u32 num_admin_replies = 0;
+ u32 num_admin_replies = 0, num_op_reply = 0;
if (!intr_info)
return IRQ_NONE;
@@ -405,8 +419,10 @@ static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata)
if (!midx)
num_admin_replies = mpi3mr_process_admin_reply_q(mrioc);
+ if (intr_info->op_reply_q)
+ num_op_reply = mpi3mr_process_op_reply_q(mrioc, intr_info);
- if (num_admin_replies)
+ if (num_admin_replies || num_op_reply)
return IRQ_HANDLED;
else
return IRQ_NONE;
@@ -415,15 +431,32 @@ static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata)
static irqreturn_t mpi3mr_isr(int irq, void *privdata)
{
struct mpi3mr_intr_info *intr_info = privdata;
+ struct mpi3mr_ioc *mrioc;
+ u16 midx;
int ret;
if (!intr_info)
return IRQ_NONE;
+ mrioc = intr_info->mrioc;
+ midx = intr_info->msix_index;
/* Call primary ISR routine */
ret = mpi3mr_isr_primary(irq, privdata);
- return ret;
+ /*
+ * If more IOs are expected, schedule IRQ polling thread.
+ * Otherwise exit from ISR.
+ */
+ if (!intr_info->op_reply_q)
+ return ret;
+
+ if (!intr_info->op_reply_q->enable_irq_poll ||
+ !atomic_read(&intr_info->op_reply_q->pend_ios))
+ return ret;
+
+ disable_irq_nosync(pci_irq_vector(mrioc->pdev, midx));
+
+ return IRQ_WAKE_THREAD;
}
/**
@@ -438,6 +471,36 @@ static irqreturn_t mpi3mr_isr(int irq, void *privdata)
*/
static irqreturn_t mpi3mr_isr_poll(int irq, void *privdata)
{
+ struct mpi3mr_intr_info *intr_info = privdata;
+ struct mpi3mr_ioc *mrioc;
+ u16 midx;
+ u32 num_op_reply = 0;
+
+ if (!intr_info || !intr_info->op_reply_q)
+ return IRQ_NONE;
+
+ mrioc = intr_info->mrioc;
+ midx = intr_info->msix_index;
+
+ /* Poll for pending IOs completions */
+ do {
+ if (!mrioc->intr_enabled)
+ break;
+
+ if (!midx)
+ mpi3mr_process_admin_reply_q(mrioc);
+ if (intr_info->op_reply_q)
+ num_op_reply +=
+ mpi3mr_process_op_reply_q(mrioc, intr_info);
+
+ usleep_range(mrioc->irqpoll_sleep, 10 * mrioc->irqpoll_sleep);
+
+ } while (atomic_read(&intr_info->op_reply_q->pend_ios) &&
+ (num_op_reply < mrioc->max_host_ios));
+
+ intr_info->op_reply_q->enable_irq_poll = false;
+ enable_irq(pci_irq_vector(mrioc->pdev, midx));
+
return IRQ_HANDLED;
}
@@ -1147,6 +1210,9 @@ static int mpi3mr_create_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx)
op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD;
op_reply_q->ci = 0;
op_reply_q->ephase = 1;
+ atomic_set(&op_reply_q->pend_ios, 0);
+ atomic_set(&op_reply_q->in_use, 0);
+ op_reply_q->enable_irq_poll = false;
if (!op_reply_q->q_segments) {
retval = mpi3mr_alloc_op_reply_q_segments(mrioc, qidx);
@@ -1465,6 +1531,10 @@ int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
pi = 0;
op_req_q->pi = pi;
+ if (atomic_inc_return(&mrioc->op_reply_qinfo[reply_qidx].pend_ios)
+ > MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT)
+ mrioc->op_reply_qinfo[reply_qidx].enable_irq_poll = true;
+
writel(op_req_q->pi,
&mrioc->sysif_regs->oper_queue_indexes[reply_qidx].producer_index);
@@ -2795,6 +2865,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc, u8 re_init)
u32 ioc_status, ioc_config, i;
struct _mpi3_ioc_facts_data facts_data;
+ mrioc->irqpoll_sleep = MPI3MR_IRQ_POLL_SLEEP;
mrioc->change_count = 0;
if (!re_init) {
mrioc->cpu_count = num_online_cpus();
@@ -3081,6 +3152,8 @@ static void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc)
mrioc->op_reply_qinfo[i].ci = 0;
mrioc->op_reply_qinfo[i].num_replies = 0;
mrioc->op_reply_qinfo[i].ephase = 0;
+ atomic_set(&mrioc->op_reply_qinfo[i].pend_ios, 0);
+ atomic_set(&mrioc->op_reply_qinfo[i].in_use, 0);
mpi3mr_memset_op_reply_q_buffers(mrioc, i);
mrioc->req_qinfo[i].ci = 0;
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 18/24] mpi3mr: add complete support of soft reset
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (16 preceding siblings ...)
2021-05-13 8:36 ` [PATCH v5 17/24] mpi3mr: add support of threaded isr Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 19/24] mpi3mr: print pending host ios for debug Kashyap Desai
` (5 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 10437 bytes --]
Unlock the host diagnostic registers and write the specific
reset type to that, wait for reset acknowledgment from the
controller, if the reset is not successful retry for the
predefined number of times
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 3 +
drivers/scsi/mpi3mr/mpi3mr_fw.c | 246 +++++++++++++++++++++++++++++++-
2 files changed, 247 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 9f16e80af06f..f871329f9382 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -189,6 +189,9 @@ enum mpi3mr_reset_reason {
MPI3MR_RESET_FROM_EVTACK_TIMEOUT = 19,
MPI3MR_RESET_FROM_CIACTVRST_TIMER = 20,
MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT = 21,
+ MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22,
+ MPI3MR_RESET_FROM_SYSFS = 23,
+ MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24
};
/**
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 176e8a2c658d..855027eaccad 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -639,6 +639,101 @@ static const char *mpi3mr_iocstate_name(enum mpi3mr_iocstate mrioc_state)
return name;
}
+/* Reset reason to name mapper structure*/
+static const struct {
+ enum mpi3mr_reset_reason value;
+ char *name;
+} mpi3mr_reset_reason_codes[] = {
+ { MPI3MR_RESET_FROM_BRINGUP, "timeout in bringup" },
+ { MPI3MR_RESET_FROM_FAULT_WATCH, "fault" },
+ { MPI3MR_RESET_FROM_IOCTL, "application invocation" },
+ { MPI3MR_RESET_FROM_EH_HOS, "error handling" },
+ { MPI3MR_RESET_FROM_TM_TIMEOUT, "TM timeout" },
+ { MPI3MR_RESET_FROM_IOCTL_TIMEOUT, "IOCTL timeout" },
+ { MPI3MR_RESET_FROM_MUR_FAILURE, "MUR failure" },
+ { MPI3MR_RESET_FROM_CTLR_CLEANUP, "timeout in controller cleanup" },
+ { MPI3MR_RESET_FROM_CIACTIV_FAULT, "component image activation fault" },
+ { MPI3MR_RESET_FROM_PE_TIMEOUT, "port enable timeout" },
+ { MPI3MR_RESET_FROM_TSU_TIMEOUT, "time stamp update timeout" },
+ { MPI3MR_RESET_FROM_DELREQQ_TIMEOUT, "delete request queue timeout" },
+ { MPI3MR_RESET_FROM_DELREPQ_TIMEOUT, "delete reply queue timeout" },
+ {
+ MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT,
+ "create request queue timeout"
+ },
+ {
+ MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT,
+ "create reply queue timeout"
+ },
+ { MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT, "IOC facts timeout" },
+ { MPI3MR_RESET_FROM_IOCINIT_TIMEOUT, "IOC init timeout" },
+ { MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT, "event notify timeout" },
+ { MPI3MR_RESET_FROM_EVTACK_TIMEOUT, "event acknowledgment timeout" },
+ {
+ MPI3MR_RESET_FROM_CIACTVRST_TIMER,
+ "component image activation timeout"
+ },
+ {
+ MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT,
+ "get package version timeout"
+ },
+ { MPI3MR_RESET_FROM_SYSFS, "sysfs invocation" },
+ { MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" },
+};
+
+/**
+ * mpi3mr_reset_rc_name - get reset reason code name
+ * @reason_code: reset reason code value
+ *
+ * Map reset reason to an NULL terminated ASCII string
+ *
+ * Return: name corresponding to reset reason value or NULL.
+ */
+static const char *mpi3mr_reset_rc_name(enum mpi3mr_reset_reason reason_code)
+{
+ int i;
+ char *name = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_reason_codes); i++) {
+ if (mpi3mr_reset_reason_codes[i].value == reason_code) {
+ name = mpi3mr_reset_reason_codes[i].name;
+ break;
+ }
+ }
+ return name;
+}
+
+/* Reset type to name mapper structure*/
+static const struct {
+ u16 reset_type;
+ char *name;
+} mpi3mr_reset_types[] = {
+ { MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, "soft" },
+ { MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, "diag fault" },
+};
+
+/**
+ * mpi3mr_reset_type_name - get reset type name
+ * @reset_type: reset type value
+ *
+ * Map reset type to an NULL terminated ASCII string
+ *
+ * Return: name corresponding to reset type value or NULL.
+ */
+static const char *mpi3mr_reset_type_name(u16 reset_type)
+{
+ int i;
+ char *name = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_types); i++) {
+ if (mpi3mr_reset_types[i].reset_type == reset_type) {
+ name = mpi3mr_reset_types[i].name;
+ break;
+ }
+ }
+ return name;
+}
+
/**
* mpi3mr_print_fault_info - Display fault information
* @mrioc: Adapter instance reference
@@ -800,6 +895,48 @@ static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
return -1;
}
+/**
+ * mpi3mr_soft_reset_success - Check softreset is success or not
+ * @ioc_status: IOC status register value
+ * @ioc_config: IOC config register value
+ *
+ * Check whether the soft reset is successful or not based on
+ * IOC status and IOC config register values.
+ *
+ * Return: True when the soft reset is success, false otherwise.
+ */
+static inline bool
+mpi3mr_soft_reset_success(u32 ioc_status, u32 ioc_config)
+{
+ if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) ||
+ (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) ||
+ (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC)))
+ return true;
+ return false;
+}
+
+/**
+ * mpi3mr_diagfault_success - Check diag fault is success or not
+ * @mrioc: Adapter reference
+ * @ioc_status: IOC status register value
+ *
+ * Check whether the controller hit diag reset fault code.
+ *
+ * Return: True when there is diag fault, false otherwise.
+ */
+static inline bool mpi3mr_diagfault_success(struct mpi3mr_ioc *mrioc,
+ u32 ioc_status)
+{
+ u32 fault;
+
+ if (!(ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT))
+ return false;
+ fault = readl(&mrioc->sysif_regs->fault) & MPI3_SYSIF_FAULT_CODE_MASK;
+ if (fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET)
+ return true;
+ return false;
+}
+
/**
* mpi3mr_set_diagsave - Set diag save bit for snapdump
* @mrioc: Adapter reference
@@ -824,14 +961,117 @@ static inline void mpi3mr_set_diagsave(struct mpi3mr_ioc *mrioc)
* @reset_type: Reset type
* @reset_reason: Reset reason code
*
- * TBD
+ * Unlock the host diagnostic registers and write the specific
+ * reset type to that, wait for reset acknowledgment from the
+ * controller, if the reset is not successful retry for the
+ * predefined number of times.
*
* Return: 0 on success, non-zero on failure.
*/
static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type,
u32 reset_reason)
{
- return 0;
+ int retval = -1;
+ u8 unlock_retry_count, reset_retry_count = 0;
+ u32 host_diagnostic, timeout, ioc_status, ioc_config;
+
+ pci_cfg_access_lock(mrioc->pdev);
+ if ((reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) &&
+ (reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT))
+ goto out;
+ if (mrioc->unrecoverable)
+ goto out;
+retry_reset:
+ unlock_retry_count = 0;
+ mpi3mr_clear_reset_history(mrioc);
+ do {
+ ioc_info(mrioc,
+ "Write magic sequence to unlock host diag register (retry=%d)\n",
+ ++unlock_retry_count);
+ if (unlock_retry_count >= MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT) {
+ writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]);
+ mrioc->unrecoverable = 1;
+ goto out;
+ }
+
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH,
+ &mrioc->sysif_regs->write_sequence);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST,
+ &mrioc->sysif_regs->write_sequence);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
+ &mrioc->sysif_regs->write_sequence);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD,
+ &mrioc->sysif_regs->write_sequence);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH,
+ &mrioc->sysif_regs->write_sequence);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH,
+ &mrioc->sysif_regs->write_sequence);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH,
+ &mrioc->sysif_regs->write_sequence);
+ usleep_range(1000, 1100);
+ host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic);
+ ioc_info(mrioc,
+ "wrote magic sequence: retry_count(%d), host_diagnostic(0x%08x)\n",
+ unlock_retry_count, host_diagnostic);
+ } while (!(host_diagnostic & MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE));
+
+ writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]);
+ ioc_info(mrioc, "%s reset due to %s(0x%x)\n",
+ mpi3mr_reset_type_name(reset_type),
+ mpi3mr_reset_rc_name(reset_reason), reset_reason);
+ writel(host_diagnostic | reset_type,
+ &mrioc->sysif_regs->host_diagnostic);
+ timeout = mrioc->ready_timeout * 10;
+ if (reset_type == MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) {
+ do {
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ if (ioc_status &
+ MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) {
+ mpi3mr_clear_reset_history(mrioc);
+ ioc_config =
+ readl(&mrioc->sysif_regs->ioc_configuration);
+ if (mpi3mr_soft_reset_success(ioc_status,
+ ioc_config)) {
+ retval = 0;
+ break;
+ }
+ }
+ msleep(100);
+ } while (--timeout);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
+ &mrioc->sysif_regs->write_sequence);
+ } else if (reset_type == MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT) {
+ do {
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ if (mpi3mr_diagfault_success(mrioc, ioc_status)) {
+ retval = 0;
+ break;
+ }
+ msleep(100);
+ } while (--timeout);
+ mpi3mr_clear_reset_history(mrioc);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
+ &mrioc->sysif_regs->write_sequence);
+ }
+ if (retval && ((++reset_retry_count) < MPI3MR_MAX_RESET_RETRY_COUNT)) {
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ ioc_info(mrioc,
+ "Base IOC Sts/Config after reset try %d is (0x%x)/(0x%x)\n",
+ reset_retry_count, ioc_status, ioc_config);
+ goto retry_reset;
+ }
+
+out:
+ pci_cfg_access_unlock(mrioc->pdev);
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+
+ ioc_info(mrioc,
+ "Base IOC Sts/Config after %s reset is (0x%x)/(0x%x)\n",
+ (!retval) ? "successful" : "failed", ioc_status,
+ ioc_config);
+ return retval;
}
/**
@@ -3448,6 +3688,8 @@ int mpi3mr_diagfault_reset_handler(struct mpi3mr_ioc *mrioc,
{
int retval = 0;
+ ioc_info(mrioc, "Entry: reason code: %s\n",
+ mpi3mr_reset_rc_name(reset_reason));
mrioc->reset_in_progress = 1;
mpi3mr_ioc_disable_intr(mrioc);
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 19/24] mpi3mr: print pending host ios for debug
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (17 preceding siblings ...)
2021-05-13 8:36 ` [PATCH v5 18/24] mpi3mr: add complete support of soft reset Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 20/24] mpi3mr: wait for pending IO completions upon detection of VD IO timeout Kashyap Desai
` (4 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 2985 bytes --]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_os.c | 69 +++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index ad3390e02034..cca9c4e9149c 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -333,6 +333,37 @@ void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc)
}
}
+/**
+ * mpi3mr_print_scmd - print individual SCSI command
+ * @rq: Block request
+ * @data: Adapter instance reference
+ * @reserved: N/A. Currently not used
+ *
+ * Print the SCSI command details if it is in LLD scope.
+ *
+ * Return: true always.
+ */
+static bool mpi3mr_print_scmd(struct request *rq,
+ void *data, bool reserved)
+{
+ struct mpi3mr_ioc *mrioc = (struct mpi3mr_ioc *)data;
+ struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(rq);
+ struct scmd_priv *priv = NULL;
+
+ if (scmd) {
+ priv = scsi_cmd_priv(scmd);
+ if (!priv->in_lld_scope)
+ goto out;
+
+ ioc_info(mrioc, "%s :Host Tag = %d, qid = %d\n",
+ __func__, priv->host_tag, priv->req_q_idx + 1);
+ scsi_print_command(scmd);
+ }
+
+out:
+ return(true);
+}
+
/**
* mpi3mr_flush_scmd - Flush individual SCSI command
* @rq: Block request
@@ -2350,6 +2381,43 @@ static int mpi3mr_map_queues(struct Scsi_Host *shost)
mrioc->pdev, mrioc->op_reply_q_offset);
}
+/**
+ * mpi3mr_get_fw_pending_ios - Calculate pending I/O count
+ * @mrioc: Adapter instance reference
+ *
+ * Calculate the pending I/Os for the controller and return.
+ *
+ * Return: Number of pending I/Os
+ */
+static inline int mpi3mr_get_fw_pending_ios(struct mpi3mr_ioc *mrioc)
+{
+ u16 i;
+ uint pend_ios = 0;
+
+ for (i = 0; i < mrioc->num_op_reply_q; i++)
+ pend_ios += atomic_read(&mrioc->op_reply_qinfo[i].pend_ios);
+ return pend_ios;
+}
+
+/**
+ * mpi3mr_print_pending_host_io - print pending I/Os
+ * @mrioc: Adapter instance reference
+ *
+ * Print number of pending I/Os and each I/O details prior to
+ * reset for debug purpose.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_print_pending_host_io(struct mpi3mr_ioc *mrioc)
+{
+ struct Scsi_Host *shost = mrioc->shost;
+
+ ioc_info(mrioc, "%s :Pending commands prior to reset: %d\n",
+ __func__, mpi3mr_get_fw_pending_ios(mrioc));
+ blk_mq_tagset_busy_iter(&shost->tag_set,
+ mpi3mr_print_scmd, (void *)mrioc);
+}
+
/**
* mpi3mr_eh_host_reset - Host reset error handling callback
* @scmd: SCSI command reference
@@ -2366,6 +2434,7 @@ static int mpi3mr_eh_host_reset(struct scsi_cmnd *scmd)
struct mpi3mr_ioc *mrioc = shost_priv(scmd->device->host);
int retval = FAILED, ret;
+ mpi3mr_print_pending_host_io(mrioc);
ret = mpi3mr_soft_reset_handler(mrioc,
MPI3MR_RESET_FROM_EH_HOS, 1);
if (ret)
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 20/24] mpi3mr: wait for pending IO completions upon detection of VD IO timeout
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (18 preceding siblings ...)
2021-05-13 8:36 ` [PATCH v5 19/24] mpi3mr: print pending host ios for debug Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 21/24] mpi3mr: add support of PM suspend and resume Kashyap Desai
` (3 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 3722 bytes --]
Wait for (default 180 seconds) host IO completion if IO timeout is detected
on VDs
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 1 +
drivers/scsi/mpi3mr/mpi3mr_fw.c | 2 ++
drivers/scsi/mpi3mr/mpi3mr_os.c | 55 +++++++++++++++++++++++++++++++++
3 files changed, 58 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index f871329f9382..b52a3d1c4371 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -102,6 +102,7 @@ extern struct list_head mrioc_list;
#define MPI3MR_RESET_HOST_IOWAIT_TIMEOUT 5
#define MPI3MR_TSUPDATE_INTERVAL 900
#define MPI3MR_DEFAULT_SHUTDOWN_TIME 120
+#define MPI3MR_RAID_ERRREC_RESET_TIMEOUT 180
#define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 855027eaccad..34372dc4eb3f 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -3765,6 +3765,8 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
}
}
+ mpi3mr_wait_for_host_io(mrioc, MPI3MR_RESET_HOST_IOWAIT_TIMEOUT);
+
mpi3mr_ioc_disable_intr(mrioc);
if (snapdump) {
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index cca9c4e9149c..022356a1cd01 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -2418,6 +2418,43 @@ static void mpi3mr_print_pending_host_io(struct mpi3mr_ioc *mrioc)
mpi3mr_print_scmd, (void *)mrioc);
}
+/**
+ * mpi3mr_wait_for_host_io - block for I/Os to complete
+ * @mrioc: Adapter instance reference
+ * @timeout: time out in seconds
+ * Waits for pending I/Os for the given adapter to complete or
+ * to hit the timeout.
+ *
+ * Return: Nothing
+ */
+void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout)
+{
+ enum mpi3mr_iocstate iocstate;
+ int i = 0;
+
+ iocstate = mpi3mr_get_iocstate(mrioc);
+ if (iocstate != MRIOC_STATE_READY)
+ return;
+
+ if (!mpi3mr_get_fw_pending_ios(mrioc))
+ return;
+ ioc_info(mrioc,
+ "%s :Waiting for %d seconds prior to reset for %d I/O\n",
+ __func__, timeout, mpi3mr_get_fw_pending_ios(mrioc));
+
+ for (i = 0; i < timeout; i++) {
+ if (!mpi3mr_get_fw_pending_ios(mrioc))
+ break;
+ iocstate = mpi3mr_get_iocstate(mrioc);
+ if (iocstate != MRIOC_STATE_READY)
+ break;
+ msleep(1000);
+ }
+
+ ioc_info(mrioc, "%s :Pending I/Os after wait is: %d\n", __func__,
+ mpi3mr_get_fw_pending_ios(mrioc));
+}
+
/**
* mpi3mr_eh_host_reset - Host reset error handling callback
* @scmd: SCSI command reference
@@ -2432,8 +2469,26 @@ static void mpi3mr_print_pending_host_io(struct mpi3mr_ioc *mrioc)
static int mpi3mr_eh_host_reset(struct scsi_cmnd *scmd)
{
struct mpi3mr_ioc *mrioc = shost_priv(scmd->device->host);
+ struct mpi3mr_stgt_priv_data *stgt_priv_data;
+ struct mpi3mr_sdev_priv_data *sdev_priv_data;
+ u8 dev_type = MPI3_DEVICE_DEVFORM_VD;
int retval = FAILED, ret;
+ sdev_priv_data = scmd->device->hostdata;
+ if (sdev_priv_data && sdev_priv_data->tgt_priv_data) {
+ stgt_priv_data = sdev_priv_data->tgt_priv_data;
+ dev_type = stgt_priv_data->dev_type;
+ }
+
+ if (dev_type == MPI3_DEVICE_DEVFORM_VD) {
+ mpi3mr_wait_for_host_io(mrioc,
+ MPI3MR_RAID_ERRREC_RESET_TIMEOUT);
+ if (!mpi3mr_get_fw_pending_ios(mrioc)) {
+ retval = SUCCESS;
+ goto out;
+ }
+ }
+
mpi3mr_print_pending_host_io(mrioc);
ret = mpi3mr_soft_reset_handler(mrioc,
MPI3MR_RESET_FROM_EH_HOS, 1);
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 21/24] mpi3mr: add support of PM suspend and resume
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (19 preceding siblings ...)
2021-05-13 8:36 ` [PATCH v5 20/24] mpi3mr: wait for pending IO completions upon detection of VD IO timeout Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 22/24] mpi3mr: add support of DSN secure fw check Kashyap Desai
` (2 subsequent siblings)
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 3184 bytes --]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_os.c | 84 +++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 022356a1cd01..2f494bc8ea0d 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -3398,6 +3398,86 @@ static void mpi3mr_shutdown(struct pci_dev *pdev)
mpi3mr_cleanup_ioc(mrioc, 0);
}
+#ifdef CONFIG_PM
+/**
+ * mpi3mr_suspend - PCI power management suspend callback
+ * @pdev: PCI device instance
+ * @state: New power state
+ *
+ * Change the power state to the given value and cleanup the IOC
+ * by issuing MUR and shutdown notification
+ *
+ * Return: 0 always.
+ */
+static int mpi3mr_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct mpi3mr_ioc *mrioc;
+ pci_power_t device_state;
+
+ if (!shost)
+ return 0;
+
+ mrioc = shost_priv(shost);
+ while (mrioc->reset_in_progress || mrioc->is_driver_loading)
+ ssleep(1);
+ mrioc->stop_drv_processing = 1;
+ mpi3mr_cleanup_fwevt_list(mrioc);
+ scsi_block_requests(shost);
+ mpi3mr_stop_watchdog(mrioc);
+ mpi3mr_cleanup_ioc(mrioc, 1);
+
+ device_state = pci_choose_state(pdev, state);
+ ioc_info(mrioc, "pdev=0x%p, slot=%s, entering operating state [D%d]\n",
+ pdev, pci_name(pdev), device_state);
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, device_state);
+ mpi3mr_cleanup_resources(mrioc);
+
+ return 0;
+}
+
+/**
+ * mpi3mr_resume - PCI power management resume callback
+ * @pdev: PCI device instance
+ *
+ * Restore the power state to D0 and reinitialize the controller
+ * and resume I/O operations to the target devices
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+static int mpi3mr_resume(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct mpi3mr_ioc *mrioc;
+ pci_power_t device_state = pdev->current_state;
+ int r;
+
+ mrioc = shost_priv(shost);
+
+ ioc_info(mrioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
+ pdev, pci_name(pdev), device_state);
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+ mrioc->pdev = pdev;
+ mrioc->cpu_count = num_online_cpus();
+ r = mpi3mr_setup_resources(mrioc);
+ if (r) {
+ ioc_info(mrioc, "%s: Setup resources failed[%d]\n",
+ __func__, r);
+ return r;
+ }
+
+ mrioc->stop_drv_processing = 0;
+ mpi3mr_init_ioc(mrioc, 1);
+ scsi_unblock_requests(shost);
+ mpi3mr_start_watchdog(mrioc);
+
+ return 0;
+}
+#endif
+
static const struct pci_device_id mpi3mr_pci_id_table[] = {
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_LSI_LOGIC, 0x00A5,
@@ -3413,6 +3493,10 @@ static struct pci_driver mpi3mr_pci_driver = {
.probe = mpi3mr_probe,
.remove = mpi3mr_remove,
.shutdown = mpi3mr_shutdown,
+#ifdef CONFIG_PM
+ .suspend = mpi3mr_suspend,
+ .resume = mpi3mr_resume,
+#endif
};
static int __init mpi3mr_init(void)
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 22/24] mpi3mr: add support of DSN secure fw check
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (20 preceding siblings ...)
2021-05-13 8:36 ` [PATCH v5 21/24] mpi3mr: add support of PM suspend and resume Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 23/24] mpi3mr: add eedp dif dix support Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 24/24] mpi3mr: add event handling debug prints Kashyap Desai
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 4780 bytes --]
Read PCI_EXT_CAP_ID_DSN to know security status.
Driver will throw an warning message when a non-secure type controller
is detected. Purpose of this interface is to avoid interacting with
any firmware which is not secured/signed by Broadcom.
Any tampering on Firmware component will be detected by hardware
and it will be communicated to the driver to avoid any further
interaction with that component.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 9 ++++
drivers/scsi/mpi3mr/mpi3mr_os.c | 80 +++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index b52a3d1c4371..35defe6e095c 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -149,6 +149,15 @@ extern struct list_head mrioc_list;
#define MPI3MR_IRQ_POLL_SLEEP 2
#define MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT 8
+/* Definitions for the controller security status*/
+#define MPI3MR_CTLR_SECURITY_STATUS_MASK 0x0C
+#define MPI3MR_CTLR_SECURE_DBG_STATUS_MASK 0x02
+
+#define MPI3MR_INVALID_DEVICE 0x00
+#define MPI3MR_CONFIG_SECURE_DEVICE 0x04
+#define MPI3MR_HARD_SECURE_DEVICE 0x08
+#define MPI3MR_TAMPERED_DEVICE 0x0C
+
/* SGE Flag definition */
#define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 2f494bc8ea0d..7dbc4ae4a4f0 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -3197,6 +3197,75 @@ static inline void mpi3mr_init_drv_cmd(struct mpi3mr_drv_cmd *cmdptr,
cmdptr->host_tag = host_tag;
}
+/**
+ * osintfc_mrioc_security_status -Check controller secure status
+ * @pdev: PCI device instance
+ *
+ * Read the Device Serial Number capability from PCI config
+ * space and decide whether the controller is secure or not.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int
+osintfc_mrioc_security_status(struct pci_dev *pdev)
+{
+ u32 cap_data;
+ int base;
+ u32 ctlr_status;
+ u32 debug_status;
+ int retval = 0;
+
+ base = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DSN);
+ if (!base) {
+ dev_err(&pdev->dev,
+ "%s: PCI_EXT_CAP_ID_DSN is not supported\n", __func__);
+ return -1;
+ }
+
+ pci_read_config_dword(pdev, base + 4, &cap_data);
+
+ debug_status = cap_data & MPI3MR_CTLR_SECURE_DBG_STATUS_MASK;
+ ctlr_status = cap_data & MPI3MR_CTLR_SECURITY_STATUS_MASK;
+
+ switch (ctlr_status) {
+ case MPI3MR_INVALID_DEVICE:
+ dev_err(&pdev->dev,
+ "%s: Non secure ctlr (Invalid) is detected: DID: 0x%x: SVID: 0x%x: SDID: 0x%x\n",
+ __func__, pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+ retval = -1;
+ break;
+ case MPI3MR_CONFIG_SECURE_DEVICE:
+ if (!debug_status)
+ dev_info(&pdev->dev,
+ "%s: Config secure ctlr is detected\n",
+ __func__);
+ break;
+ case MPI3MR_HARD_SECURE_DEVICE:
+ break;
+ case MPI3MR_TAMPERED_DEVICE:
+ dev_err(&pdev->dev,
+ "%s: Non secure ctlr (Tampered) is detected: DID: 0x%x: SVID: 0x%x: SDID: 0x%x\n",
+ __func__, pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+ retval = -1;
+ break;
+ default:
+ retval = -1;
+ break;
+ }
+
+ if (!retval && debug_status) {
+ dev_err(&pdev->dev,
+ "%s: Non secure ctlr (Secure Dbg) is detected: DID: 0x%x: SVID: 0x%x: SDID: 0x%x\n",
+ __func__, pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+ retval = -1;
+ }
+
+ return retval;
+}
+
/**
* mpi3mr_probe - PCI probe callback
* @pdev: PCI device instance
@@ -3219,6 +3288,11 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
struct Scsi_Host *shost = NULL;
int retval = 0, i;
+ if (osintfc_mrioc_security_status(pdev)) {
+ warn_non_secure_ctlr = 1;
+ return 1; /* For Invalid and Tampered device */
+ }
+
shost = scsi_host_alloc(&mpi3mr_driver_template,
sizeof(struct mpi3mr_ioc));
if (!shost) {
@@ -3335,6 +3409,9 @@ static void mpi3mr_remove(struct pci_dev *pdev)
unsigned long flags;
struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next;
+ if (!shost)
+ return;
+
mrioc = shost_priv(shost);
while (mrioc->reset_in_progress || mrioc->is_driver_loading)
ssleep(1);
@@ -3453,6 +3530,9 @@ static int mpi3mr_resume(struct pci_dev *pdev)
pci_power_t device_state = pdev->current_state;
int r;
+ if (!shost)
+ return 0;
+
mrioc = shost_priv(shost);
ioc_info(mrioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 23/24] mpi3mr: add eedp dif dix support
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (21 preceding siblings ...)
2021-05-13 8:36 ` [PATCH v5 22/24] mpi3mr: add support of DSN secure fw check Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
2021-05-13 8:36 ` [PATCH v5 24/24] mpi3mr: add event handling debug prints Kashyap Desai
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 15744 bytes --]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr.h | 5 +
drivers/scsi/mpi3mr/mpi3mr_fw.c | 7 +
drivers/scsi/mpi3mr/mpi3mr_os.c | 301 +++++++++++++++++++++++++++++++-
3 files changed, 308 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 35defe6e095c..ed5830c88f34 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -118,6 +118,7 @@ extern struct list_head mrioc_list;
#define MPI3MR_SENSEBUF_SZ 256
#define MPI3MR_SENSEBUF_FACTOR 3
#define MPI3MR_CHAINBUF_FACTOR 3
+#define MPI3MR_CHAINBUFDIX_FACTOR 2
/* Invalid target device handle */
#define MPI3MR_INVALID_DEV_HANDLE 0xFFFF
@@ -557,17 +558,21 @@ struct chain_element {
*
* @host_tag: Host tag specific to operational queue
* @in_lld_scope: Command in LLD scope or not
+ * @meta_sg_valid: DIX command with meta data SGL or not
* @scmd: SCSI Command pointer
* @req_q_idx: Operational request queue index
* @chain_idx: Chain frame index
+ * @meta_chain_idx: Chain frame index of meta data SGL
* @mpi3mr_scsiio_req: MPI SCSI IO request
*/
struct scmd_priv {
u16 host_tag;
u8 in_lld_scope;
+ u8 meta_sg_valid;
struct scsi_cmnd *scmd;
u16 req_q_idx;
int chain_idx;
+ int meta_chain_idx;
u8 mpi3mr_scsiio_req[MPI3MR_ADMIN_REQ_FRAME_SZ];
};
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 34372dc4eb3f..93d9ed155a91 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -9,6 +9,7 @@
#include "mpi3mr.h"
#include <linux/io-64-nonatomic-lo-hi.h>
+extern int prot_mask;
#if defined(writeq) && defined(CONFIG_64BIT)
static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr)
@@ -2749,6 +2750,12 @@ static int mpi3mr_alloc_chain_bufs(struct mpi3mr_ioc *mrioc)
num_chains = mrioc->max_host_ios / MPI3MR_CHAINBUF_FACTOR;
+ if (prot_mask & (SHOST_DIX_TYPE0_PROTECTION
+ | SHOST_DIX_TYPE1_PROTECTION
+ | SHOST_DIX_TYPE2_PROTECTION
+ | SHOST_DIX_TYPE3_PROTECTION))
+ num_chains += (num_chains / MPI3MR_CHAINBUFDIX_FACTOR);
+
mrioc->chain_buf_count = num_chains;
sz = sizeof(struct chain_element) * num_chains;
mrioc->chain_sgl_list = kzalloc(sz, GFP_KERNEL);
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 7dbc4ae4a4f0..ba7ce324ed87 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -21,6 +21,13 @@ MODULE_LICENSE(MPI3MR_DRIVER_LICENSE);
MODULE_VERSION(MPI3MR_DRIVER_VERSION);
/* Module parameters*/
+int prot_mask = -1;
+module_param(prot_mask, int, 0);
+MODULE_PARM_DESC(prot_mask, "Host protection capabilities mask, def=0x07");
+
+int prot_guard_mask = 3;
+module_param(prot_guard_mask, int, 0);
+MODULE_PARM_DESC(prot_guard_mask, " Host protection guard mask, def=3");
int logging_level;
module_param(logging_level, int, 0);
MODULE_PARM_DESC(logging_level,
@@ -59,7 +66,9 @@ static u16 mpi3mr_host_tag_for_scmd(struct mpi3mr_ioc *mrioc,
priv->scmd = scmd;
priv->in_lld_scope = 1;
priv->req_q_idx = hw_queue;
+ priv->meta_chain_idx = -1;
priv->chain_idx = -1;
+ priv->meta_sg_valid = 0;
return priv->host_tag;
}
@@ -119,10 +128,15 @@ static void mpi3mr_clear_scmd_priv(struct mpi3mr_ioc *mrioc,
priv->req_q_idx = 0xFFFF;
priv->scmd = NULL;
priv->in_lld_scope = 0;
+ priv->meta_sg_valid = 0;
if (priv->chain_idx >= 0) {
clear_bit(priv->chain_idx, mrioc->chain_bitmap);
priv->chain_idx = -1;
}
+ if (priv->meta_chain_idx >= 0) {
+ clear_bit(priv->meta_chain_idx, mrioc->chain_bitmap);
+ priv->meta_chain_idx = -1;
+ }
}
static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle,
@@ -388,6 +402,9 @@ static bool mpi3mr_flush_scmd(struct request *rq,
if (!priv->in_lld_scope)
goto out;
+ if (priv->meta_sg_valid)
+ dma_unmap_sg(&mrioc->pdev->dev, scsi_prot_sglist(scmd),
+ scsi_prot_sg_count(scmd), scmd->sc_data_direction);
mpi3mr_clear_scmd_priv(mrioc, scmd);
scsi_dma_unmap(scmd);
scmd->result = DID_RESET << 16;
@@ -785,6 +802,7 @@ static void mpi3mr_update_tgtdev(struct mpi3mr_ioc *mrioc,
{
u16 flags = 0;
struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+ u8 prot_mask = 0;
tgtdev->perst_id = le16_to_cpu(dev_pg0->persistent_id);
tgtdev->dev_handle = le16_to_cpu(dev_pg0->dev_handle);
@@ -849,6 +867,15 @@ static void mpi3mr_update_tgtdev(struct mpi3mr_ioc *mrioc,
if ((dev_info & MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK) !=
MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE)
tgtdev->is_hidden = 1;
+ if (mrioc->shost)
+ prot_mask = scsi_host_get_prot(mrioc->shost);
+ if (prot_mask & SHOST_DIX_TYPE0_PROTECTION) {
+ scsi_host_set_prot(mrioc->shost, prot_mask & 0x77);
+ ioc_info(mrioc,
+ "%s : Disabling DIX0 prot capability\n", __func__);
+ ioc_info(mrioc,
+ "because HBA does not support DIX0 operation on NVME drives\n");
+ }
break;
}
case MPI3_DEVICE_DEVFORM_VD:
@@ -1752,6 +1779,194 @@ void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
}
}
+/**
+ * mpi3mr_setup_eedp - Setup EEDP information in MPI3 SCSI IO
+ * @mrioc: Adapter instance reference
+ * @scmd: SCSI command reference
+ * @scsiio_req: MPI3 SCSI IO request
+ *
+ * Identifies the protection information flags from the SCSI
+ * command and set appropriate flags in the MPI3 SCSI IO
+ * request.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_setup_eedp(struct mpi3mr_ioc *mrioc,
+ struct scsi_cmnd *scmd, struct _mpi3_scsi_io_request *scsiio_req)
+{
+ u16 eedp_flags = 0;
+ unsigned char prot_op = scsi_get_prot_op(scmd);
+ unsigned char prot_type = scsi_get_prot_type(scmd);
+
+ switch (prot_op) {
+ case SCSI_PROT_NORMAL:
+ return;
+ case SCSI_PROT_READ_STRIP:
+ eedp_flags = MPI3_EEDPFLAGS_EEDP_OP_CHECK_REMOVE;
+ break;
+ case SCSI_PROT_WRITE_INSERT:
+ eedp_flags = MPI3_EEDPFLAGS_EEDP_OP_INSERT;
+ break;
+ case SCSI_PROT_READ_INSERT:
+ eedp_flags = MPI3_EEDPFLAGS_EEDP_OP_INSERT;
+ scsiio_req->msg_flags |= MPI3_SCSIIO_MSGFLAGS_METASGL_VALID;
+ break;
+ case SCSI_PROT_WRITE_STRIP:
+ eedp_flags = MPI3_EEDPFLAGS_EEDP_OP_CHECK_REMOVE;
+ scsiio_req->msg_flags |= MPI3_SCSIIO_MSGFLAGS_METASGL_VALID;
+ break;
+ case SCSI_PROT_READ_PASS:
+ eedp_flags = MPI3_EEDPFLAGS_EEDP_OP_CHECK |
+ MPI3_EEDPFLAGS_CHK_REF_TAG | MPI3_EEDPFLAGS_CHK_APP_TAG |
+ MPI3_EEDPFLAGS_CHK_GUARD;
+ scsiio_req->msg_flags |= MPI3_SCSIIO_MSGFLAGS_METASGL_VALID;
+ break;
+ case SCSI_PROT_WRITE_PASS:
+ if (scsi_host_get_guard(scmd->device->host)
+ & SHOST_DIX_GUARD_IP) {
+ eedp_flags = MPI3_EEDPFLAGS_EEDP_OP_CHECK_REGEN |
+ MPI3_EEDPFLAGS_CHK_APP_TAG |
+ MPI3_EEDPFLAGS_CHK_GUARD |
+ MPI3_EEDPFLAGS_INCR_PRI_REF_TAG;
+ scsiio_req->sgl[0].eedp.application_tag_translation_mask =
+ 0xffff;
+ } else {
+ eedp_flags = MPI3_EEDPFLAGS_EEDP_OP_CHECK |
+ MPI3_EEDPFLAGS_CHK_REF_TAG |
+ MPI3_EEDPFLAGS_CHK_APP_TAG |
+ MPI3_EEDPFLAGS_CHK_GUARD;
+ }
+ scsiio_req->msg_flags |= MPI3_SCSIIO_MSGFLAGS_METASGL_VALID;
+ break;
+ default:
+ return;
+ }
+
+ if (scsi_host_get_guard(scmd->device->host) & SHOST_DIX_GUARD_IP)
+ eedp_flags |= MPI3_EEDPFLAGS_HOST_GUARD_IP_CHKSUM;
+
+ switch (prot_type) {
+ case SCSI_PROT_DIF_TYPE0:
+ eedp_flags |= MPI3_EEDPFLAGS_INCR_PRI_REF_TAG;
+ scsiio_req->cdb.eedp32.primary_reference_tag =
+ cpu_to_be32(t10_pi_ref_tag(scmd->request));
+ break;
+ case SCSI_PROT_DIF_TYPE1:
+ case SCSI_PROT_DIF_TYPE2:
+ eedp_flags |= MPI3_EEDPFLAGS_INCR_PRI_REF_TAG |
+ MPI3_EEDPFLAGS_ESC_MODE_APPTAG_DISABLE |
+ MPI3_EEDPFLAGS_CHK_GUARD;
+ scsiio_req->cdb.eedp32.primary_reference_tag =
+ cpu_to_be32(t10_pi_ref_tag(scmd->request));
+ break;
+ case SCSI_PROT_DIF_TYPE3:
+ eedp_flags |= MPI3_EEDPFLAGS_CHK_GUARD |
+ MPI3_EEDPFLAGS_ESC_MODE_APPTAG_DISABLE;
+ break;
+
+ default:
+ scsiio_req->msg_flags &= ~(MPI3_SCSIIO_MSGFLAGS_METASGL_VALID);
+ return;
+ }
+
+ switch (scmd->device->sector_size) {
+ case 512:
+ scsiio_req->sgl[0].eedp.user_data_size = MPI3_EEDP_UDS_512;
+ break;
+ case 520:
+ scsiio_req->sgl[0].eedp.user_data_size = MPI3_EEDP_UDS_520;
+ break;
+ case 4080:
+ scsiio_req->sgl[0].eedp.user_data_size = MPI3_EEDP_UDS_4080;
+ break;
+ case 4088:
+ scsiio_req->sgl[0].eedp.user_data_size = MPI3_EEDP_UDS_4088;
+ break;
+ case 4096:
+ scsiio_req->sgl[0].eedp.user_data_size = MPI3_EEDP_UDS_4096;
+ break;
+ case 4104:
+ scsiio_req->sgl[0].eedp.user_data_size = MPI3_EEDP_UDS_4104;
+ break;
+ case 4160:
+ scsiio_req->sgl[0].eedp.user_data_size = MPI3_EEDP_UDS_4160;
+ break;
+ default:
+ break;
+ }
+
+ scsiio_req->sgl[0].eedp.eedp_flags = cpu_to_le16(eedp_flags);
+ scsiio_req->sgl[0].eedp.flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED;
+}
+
+
+/**
+ * mpi3mr_build_sense_buffer - Map sense information
+ * @desc: Sense type
+ * @buf: Sense buffer to populate
+ * @key: Sense key
+ * @asc: Additional sense code
+ * @ascq: Additional sense code qualifier
+ *
+ * Maps the given sense information into either descriptor or
+ * fixed format sense data.
+ *
+ * Return: Nothing
+ */
+static inline void mpi3mr_build_sense_buffer(int desc, u8 *buf, u8 key,
+ u8 asc, u8 ascq)
+{
+ if (desc) {
+ buf[0] = 0x72; /* descriptor, current */
+ buf[1] = key;
+ buf[2] = asc;
+ buf[3] = ascq;
+ buf[7] = 0;
+ } else {
+ buf[0] = 0x70; /* fixed, current */
+ buf[2] = key;
+ buf[7] = 0xa;
+ buf[12] = asc;
+ buf[13] = ascq;
+ }
+}
+
+/**
+ * mpi3mr_map_eedp_error - Map EEDP errors from IOC status
+ * @scmd: SCSI command reference
+ * @ioc_status: status of MPI3 request
+ *
+ * Maps the EEDP error status of the SCSI IO request to sense
+ * data.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_map_eedp_error(struct scsi_cmnd *scmd,
+ u16 ioc_status)
+{
+ u8 ascq = 0;
+
+ switch (ioc_status) {
+ case MPI3_IOCSTATUS_EEDP_GUARD_ERROR:
+ ascq = 0x01;
+ break;
+ case MPI3_IOCSTATUS_EEDP_APP_TAG_ERROR:
+ ascq = 0x02;
+ break;
+ case MPI3_IOCSTATUS_EEDP_REF_TAG_ERROR:
+ ascq = 0x03;
+ break;
+ default:
+ ascq = 0x00;
+ break;
+ }
+
+ mpi3mr_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x10, ascq);
+ scmd->result = DRIVER_SENSE << 24 | (DID_ABORT << 16) |
+ SAM_STAT_CHECK_CONDITION;
+}
+
/**
* mpi3mr_process_op_reply_desc - reply descriptor handler
* @mrioc: Adapter instance reference
@@ -1914,6 +2129,11 @@ void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
else if (scsi_state & MPI3_SCSI_STATE_TERMINATED)
scmd->result = DID_RESET << 16;
break;
+ case MPI3_IOCSTATUS_EEDP_GUARD_ERROR:
+ case MPI3_IOCSTATUS_EEDP_REF_TAG_ERROR:
+ case MPI3_IOCSTATUS_EEDP_APP_TAG_ERROR:
+ mpi3mr_map_eedp_error(scmd, ioc_status);
+ break;
case MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR:
case MPI3_IOCSTATUS_INVALID_FUNCTION:
case MPI3_IOCSTATUS_INVALID_SGL:
@@ -1949,6 +2169,10 @@ void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
}
}
out_success:
+ if (priv->meta_sg_valid) {
+ dma_unmap_sg(&mrioc->pdev->dev, scsi_prot_sglist(scmd),
+ scsi_prot_sg_count(scmd), scmd->sc_data_direction);
+ }
mpi3mr_clear_scmd_priv(mrioc, scmd);
scsi_dma_unmap(scmd);
scmd->scsi_done(scmd);
@@ -2012,6 +2236,8 @@ static int mpi3mr_prepare_sg_scmd(struct mpi3mr_ioc *mrioc,
u8 last_chain_sgl_flags;
struct chain_element *chain_req;
struct scmd_priv *priv = NULL;
+ u32 meta_sg = le32_to_cpu(scsiio_req->flags) &
+ MPI3_SCSIIO_FLAGS_DMAOPERATION_HOST_PI;
priv = scsi_cmd_priv(scmd);
@@ -2022,15 +2248,27 @@ static int mpi3mr_prepare_sg_scmd(struct mpi3mr_ioc *mrioc,
last_chain_sgl_flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN |
MPI3_SGE_FLAGS_DLAS_SYSTEM;
- sg_local = &scsiio_req->sgl;
+ if (meta_sg)
+ sg_local = &scsiio_req->sgl[MPI3_SCSIIO_METASGL_INDEX];
+ else
+ sg_local = &scsiio_req->sgl;
- if (!scsiio_req->data_length) {
+ if (!scsiio_req->data_length && !meta_sg) {
mpi3mr_build_zero_len_sge(sg_local);
return 0;
}
- sg_scmd = scsi_sglist(scmd);
- sges_left = scsi_dma_map(scmd);
+ if (meta_sg) {
+ sg_scmd = scsi_prot_sglist(scmd);
+ sges_left = dma_map_sg(&mrioc->pdev->dev,
+ scsi_prot_sglist(scmd),
+ scsi_prot_sg_count(scmd),
+ scmd->sc_data_direction);
+ priv->meta_sg_valid = 1; /* To unmap meta sg DMA */
+ } else {
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ }
if (sges_left < 0) {
sdev_printk(KERN_ERR, scmd->device,
@@ -2048,6 +2286,22 @@ static int mpi3mr_prepare_sg_scmd(struct mpi3mr_ioc *mrioc,
sges_in_segment = (mrioc->facts.op_req_sz -
offsetof(struct _mpi3_scsi_io_request, sgl)) / sizeof(struct _mpi3_sge_common);
+ if (scsiio_req->sgl[0].eedp.flags ==
+ MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED && !meta_sg) {
+ sg_local += sizeof(struct _mpi3_sge_common);
+ sges_in_segment--;
+ /* Reserve 1st segment (scsiio_req->sgl[0]) for eedp */
+ }
+
+ if (scsiio_req->msg_flags ==
+ MPI3_SCSIIO_MSGFLAGS_METASGL_VALID && !meta_sg) {
+ sges_in_segment--;
+ /* Reserve last segment (scsiio_req->sgl[3]) for meta sg */
+ }
+
+ if (meta_sg)
+ sges_in_segment = 1;
+
if (sges_left <= sges_in_segment)
goto fill_in_last_segment;
@@ -2065,7 +2319,10 @@ static int mpi3mr_prepare_sg_scmd(struct mpi3mr_ioc *mrioc,
if (chain_idx < 0)
return -1;
chain_req = &mrioc->chain_sgl_list[chain_idx];
- priv->chain_idx = chain_idx;
+ if (meta_sg)
+ priv->meta_chain_idx = chain_idx;
+ else
+ priv->chain_idx = chain_idx;
chain = chain_req->addr;
chain_dma = chain_req->dma_addr;
@@ -2115,6 +2372,13 @@ static int mpi3mr_build_sg_scmd(struct mpi3mr_ioc *mrioc,
if (ret)
return ret;
+ if (scsiio_req->msg_flags == MPI3_SCSIIO_MSGFLAGS_METASGL_VALID) {
+ /* There is a valid meta sg */
+ scsiio_req->flags |=
+ cpu_to_le32(MPI3_SCSIIO_FLAGS_DMAOPERATION_HOST_PI);
+ ret = mpi3mr_prepare_sg_scmd(mrioc, scmd, scsiio_req);
+ }
+
return ret;
}
@@ -3122,6 +3386,8 @@ static int mpi3mr_qcmd(struct Scsi_Host *shost,
scsiio_req->function = MPI3_FUNCTION_SCSI_IO;
scsiio_req->host_tag = cpu_to_le16(host_tag);
+ mpi3mr_setup_eedp(mrioc, scmd, scsiio_req);
+
memcpy(scsiio_req->cdb.cdb32, scmd->cmnd, scmd->cmd_len);
scsiio_req->data_length = cpu_to_le32(scsi_bufflen(scmd));
scsiio_req->dev_handle = cpu_to_le16(dev_handle);
@@ -3345,6 +3611,31 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
shost->max_channel = 1;
shost->max_id = 0xFFFFFFFF;
+ if (prot_mask >= 0)
+ scsi_host_set_prot(shost, prot_mask);
+ else {
+ prot_mask = SHOST_DIF_TYPE1_PROTECTION
+ | SHOST_DIF_TYPE2_PROTECTION
+ | SHOST_DIF_TYPE3_PROTECTION;
+ scsi_host_set_prot(shost, prot_mask);
+ }
+
+ ioc_info(mrioc,
+ "%s :host protection capabilities enabled %s%s%s%s%s%s%s\n",
+ __func__,
+ (prot_mask & SHOST_DIF_TYPE1_PROTECTION) ? " DIF1" : "",
+ (prot_mask & SHOST_DIF_TYPE2_PROTECTION) ? " DIF2" : "",
+ (prot_mask & SHOST_DIF_TYPE3_PROTECTION) ? " DIF3" : "",
+ (prot_mask & SHOST_DIX_TYPE0_PROTECTION) ? " DIX0" : "",
+ (prot_mask & SHOST_DIX_TYPE1_PROTECTION) ? " DIX1" : "",
+ (prot_mask & SHOST_DIX_TYPE2_PROTECTION) ? " DIX2" : "",
+ (prot_mask & SHOST_DIX_TYPE3_PROTECTION) ? " DIX3" : "");
+
+ if (prot_guard_mask)
+ scsi_host_set_guard(shost, (prot_guard_mask & 3));
+ else
+ scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
snprintf(mrioc->fwevt_worker_name, sizeof(mrioc->fwevt_worker_name),
"%s%d_fwevt_wrkr", mrioc->driver_name, mrioc->id);
mrioc->fwevt_worker_thread = alloc_ordered_workqueue(
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH v5 24/24] mpi3mr: add event handling debug prints
2021-05-13 8:35 [PATCH v5 00/24] Introducing mpi3mr driver Kashyap Desai
` (22 preceding siblings ...)
2021-05-13 8:36 ` [PATCH v5 23/24] mpi3mr: add eedp dif dix support Kashyap Desai
@ 2021-05-13 8:36 ` Kashyap Desai
23 siblings, 0 replies; 38+ messages in thread
From: Kashyap Desai @ 2021-05-13 8:36 UTC (permalink / raw)
To: linux-scsi
Cc: jejb, martin.petersen, steve.hagan, peter.rivera,
mpi3mr-linuxdrv.pdl, Kashyap Desai, sathya.prakash
[-- Attachment #1: Type: text/plain, Size: 11193 bytes --]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: sathya.prakash@broadcom.com
---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 115 ++++++++++++++++++++++
drivers/scsi/mpi3mr/mpi3mr_os.c | 166 +++++++++++++++++++++++++++++++-
2 files changed, 280 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 93d9ed155a91..d808d578c641 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -154,6 +154,120 @@ void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
spin_unlock(&mrioc->sbq_lock);
}
+static void mpi3mr_print_event_data(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_notification_reply *event_reply)
+{
+ char *desc = NULL;
+ u16 event;
+
+ event = event_reply->event;
+
+ switch (event) {
+ case MPI3_EVENT_LOG_DATA:
+ desc = "Log Data";
+ break;
+ case MPI3_EVENT_CHANGE:
+ desc = "Event Change";
+ break;
+ case MPI3_EVENT_GPIO_INTERRUPT:
+ desc = "GPIO Interrupt";
+ break;
+ case MPI3_EVENT_TEMP_THRESHOLD:
+ desc = "Temperature Threshold";
+ break;
+ case MPI3_EVENT_CABLE_MGMT:
+ desc = "Cable Management";
+ break;
+ case MPI3_EVENT_ENERGY_PACK_CHANGE:
+ desc = "Energy Pack Change";
+ break;
+ case MPI3_EVENT_DEVICE_ADDED:
+ {
+ struct _mpi3_device_page0 *event_data =
+ (struct _mpi3_device_page0 *)event_reply->event_data;
+ ioc_info(mrioc, "Device Added: dev=0x%04x Form=0x%x\n",
+ event_data->dev_handle, event_data->device_form);
+ return;
+ }
+ case MPI3_EVENT_DEVICE_INFO_CHANGED:
+ {
+ struct _mpi3_device_page0 *event_data =
+ (struct _mpi3_device_page0 *)event_reply->event_data;
+ ioc_info(mrioc, "Device Info Changed: dev=0x%04x Form=0x%x\n",
+ event_data->dev_handle, event_data->device_form);
+ return;
+ }
+ case MPI3_EVENT_DEVICE_STATUS_CHANGE:
+ {
+ struct _mpi3_event_data_device_status_change *event_data =
+ (struct _mpi3_event_data_device_status_change *)event_reply->event_data;
+ ioc_info(mrioc, "Device status Change: dev=0x%04x RC=0x%x\n",
+ event_data->dev_handle, event_data->reason_code);
+ return;
+ }
+ case MPI3_EVENT_SAS_DISCOVERY:
+ {
+ struct _mpi3_event_data_sas_discovery *event_data =
+ (struct _mpi3_event_data_sas_discovery *)event_reply->event_data;
+ ioc_info(mrioc, "SAS Discovery: (%s) status (0x%08x)\n",
+ (event_data->reason_code == MPI3_EVENT_SAS_DISC_RC_STARTED) ?
+ "start" : "stop",
+ le32_to_cpu(event_data->discovery_status));
+ return;
+ }
+ case MPI3_EVENT_SAS_BROADCAST_PRIMITIVE:
+ desc = "SAS Broadcast Primitive";
+ break;
+ case MPI3_EVENT_SAS_NOTIFY_PRIMITIVE:
+ desc = "SAS Notify Primitive";
+ break;
+ case MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+ desc = "SAS Init Device Status Change";
+ break;
+ case MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW:
+ desc = "SAS Init Table Overflow";
+ break;
+ case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+ desc = "SAS Topology Change List";
+ break;
+ case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE:
+ desc = "Enclosure Device Status Change";
+ break;
+ case MPI3_EVENT_HARD_RESET_RECEIVED:
+ desc = "Hard Reset Received";
+ break;
+ case MPI3_EVENT_SAS_PHY_COUNTER:
+ desc = "SAS PHY Counter";
+ break;
+ case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+ desc = "SAS Device Discovery Error";
+ break;
+ case MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ desc = "PCIE Topology Change List";
+ break;
+ case MPI3_EVENT_PCIE_ENUMERATION:
+ {
+ struct _mpi3_event_data_pcie_enumeration *event_data =
+ (struct _mpi3_event_data_pcie_enumeration *)event_reply->event_data;
+ ioc_info(mrioc, "PCIE Enumeration: (%s)",
+ (event_data->reason_code ==
+ MPI3_EVENT_PCIE_ENUM_RC_STARTED) ? "start" : "stop");
+ if (event_data->enumeration_status)
+ ioc_info(mrioc, "enumeration_status(0x%08x)\n",
+ le32_to_cpu(event_data->enumeration_status));
+ return;
+ }
+ case MPI3_EVENT_PREPARE_FOR_RESET:
+ desc = "Prepare For Reset";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ ioc_info(mrioc, "%s\n", desc);
+}
+
static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc,
struct _mpi3_default_reply *def_reply)
{
@@ -161,6 +275,7 @@ static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc,
(struct _mpi3_event_notification_reply *)def_reply;
mrioc->change_count = le16_to_cpu(event_reply->ioc_change_count);
+ mpi3mr_print_event_data(mrioc, event_reply);
mpi3mr_os_handle_events(mrioc, event_reply);
}
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index ba7ce324ed87..a50863d4ab90 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -995,6 +995,85 @@ static void mpi3mr_devinfochg_evt_bh(struct mpi3mr_ioc *mrioc,
mpi3mr_tgtdev_put(tgtdev);
}
+/**
+ * mpi3mr_sastopochg_evt_debug - SASTopoChange details
+ * @mrioc: Adapter instance reference
+ * @event_data: SAS topology change list event data
+ *
+ * Prints information about the SAS topology change event.
+ *
+ * Return: Nothing.
+ */
+static void
+mpi3mr_sastopochg_evt_debug(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_data_sas_topology_change_list *event_data)
+{
+ int i;
+ u16 handle;
+ u8 reason_code, phy_number;
+ char *status_str = NULL;
+ u8 link_rate, prev_link_rate;
+
+ switch (event_data->exp_status) {
+ case MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
+ status_str = "remove";
+ break;
+ case MPI3_EVENT_SAS_TOPO_ES_RESPONDING:
+ status_str = "responding";
+ break;
+ case MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
+ status_str = "remove delay";
+ break;
+ case MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER:
+ status_str = "direct attached";
+ break;
+ default:
+ status_str = "unknown status";
+ break;
+ }
+ ioc_info(mrioc, "%s :sas topology change: (%s)\n",
+ __func__, status_str);
+ ioc_info(mrioc,
+ "%s :\texpander_handle(0x%04x), enclosure_handle(0x%04x) start_phy(%02d), num_entries(%d)\n",
+ __func__, le16_to_cpu(event_data->expander_dev_handle),
+ le16_to_cpu(event_data->enclosure_handle),
+ event_data->start_phy_num, event_data->num_entries);
+ for (i = 0; i < event_data->num_entries; i++) {
+ handle = le16_to_cpu(event_data->phy_entry[i].attached_dev_handle);
+ if (!handle)
+ continue;
+ phy_number = event_data->start_phy_num + i;
+ reason_code = event_data->phy_entry[i].status &
+ MPI3_EVENT_SAS_TOPO_PHY_RC_MASK;
+ switch (reason_code) {
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING:
+ status_str = "target remove";
+ break;
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING:
+ status_str = "delay target remove";
+ break;
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED:
+ status_str = "link status change";
+ break;
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE:
+ status_str = "link status no change";
+ break;
+ case MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING:
+ status_str = "target responding";
+ break;
+ default:
+ status_str = "unknown";
+ break;
+ }
+ link_rate = event_data->phy_entry[i].link_rate >> 4;
+ prev_link_rate = event_data->phy_entry[i].link_rate & 0xF;
+ ioc_info(mrioc,
+ "%s :\tphy(%02d), attached_handle(0x%04x): %s: link rate: new(0x%02x), old(0x%02x)\n",
+ __func__, phy_number, handle, status_str, link_rate,
+ prev_link_rate);
+ }
+}
+
/**
* mpi3mr_sastopochg_evt_bh - SASTopologyChange evt bottomhalf
* @mrioc: Adapter instance reference
@@ -1016,6 +1095,8 @@ static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc,
u8 reason_code;
struct mpi3mr_tgt_dev *tgtdev = NULL;
+ mpi3mr_sastopochg_evt_debug(mrioc, event_data);
+
for (i = 0; i < event_data->num_entries; i++) {
handle = le16_to_cpu(event_data->phy_entry[i].attached_dev_handle);
if (!handle)
@@ -1042,6 +1123,88 @@ static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc,
}
}
+/**
+ * mpi3mr_pcietopochg_evt_debug - PCIeTopoChange details
+ * @mrioc: Adapter instance reference
+ * @event_data: PCIe topology change list event data
+ *
+ * Prints information about the PCIe topology change event.
+ *
+ * Return: Nothing.
+ */
+static void
+mpi3mr_pcietopochg_evt_debug(struct mpi3mr_ioc *mrioc,
+ struct _mpi3_event_data_pcie_topology_change_list *event_data)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+ u8 port_number;
+ char *status_str = NULL;
+ u8 link_rate, prev_link_rate;
+
+ switch (event_data->switch_status) {
+ case MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING:
+ status_str = "remove";
+ break;
+ case MPI3_EVENT_PCIE_TOPO_SS_RESPONDING:
+ status_str = "responding";
+ break;
+ case MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING:
+ status_str = "remove delay";
+ break;
+ case MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH:
+ status_str = "direct attached";
+ break;
+ default:
+ status_str = "unknown status";
+ break;
+ }
+ ioc_info(mrioc, "%s :pcie topology change: (%s)\n",
+ __func__, status_str);
+ ioc_info(mrioc,
+ "%s :\tswitch_handle(0x%04x), enclosure_handle(0x%04x) start_port(%02d), num_entries(%d)\n",
+ __func__, le16_to_cpu(event_data->switch_dev_handle),
+ le16_to_cpu(event_data->enclosure_handle),
+ event_data->start_port_num, event_data->num_entries);
+ for (i = 0; i < event_data->num_entries; i++) {
+ handle =
+ le16_to_cpu(event_data->port_entry[i].attached_dev_handle);
+ if (!handle)
+ continue;
+ port_number = event_data->start_port_num + i;
+ reason_code = event_data->port_entry[i].port_status;
+ switch (reason_code) {
+ case MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+ status_str = "target remove";
+ break;
+ case MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
+ status_str = "delay target remove";
+ break;
+ case MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+ status_str = "link status change";
+ break;
+ case MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE:
+ status_str = "link status no change";
+ break;
+ case MPI3_EVENT_PCIE_TOPO_PS_RESPONDING:
+ status_str = "target responding";
+ break;
+ default:
+ status_str = "unknown";
+ break;
+ }
+ link_rate = event_data->port_entry[i].current_port_info &
+ MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK;
+ prev_link_rate = event_data->port_entry[i].previous_port_info &
+ MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK;
+ ioc_info(mrioc,
+ "%s :\tport(%02d), attached_handle(0x%04x): %s: link rate: new(0x%02x), old(0x%02x)\n",
+ __func__, port_number, handle, status_str, link_rate,
+ prev_link_rate);
+ }
+}
+
/**
* mpi3mr_pcietopochg_evt_bh - PCIeTopologyChange evt bottomhalf
* @mrioc: Adapter instance reference
@@ -1063,6 +1226,8 @@ static void mpi3mr_pcietopochg_evt_bh(struct mpi3mr_ioc *mrioc,
u8 reason_code;
struct mpi3mr_tgt_dev *tgtdev = NULL;
+ mpi3mr_pcietopochg_evt_debug(mrioc, event_data);
+
for (i = 0; i < event_data->num_entries; i++) {
handle =
le16_to_cpu(event_data->port_entry[i].attached_dev_handle);
@@ -1899,7 +2064,6 @@ static void mpi3mr_setup_eedp(struct mpi3mr_ioc *mrioc,
scsiio_req->sgl[0].eedp.flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED;
}
-
/**
* mpi3mr_build_sense_buffer - Map sense information
* @desc: Sense type
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 38+ messages in thread