From: Pavle Predic <pavle.predic@yahoo.co.uk>
To: Terry Wu <terrywu2009@gmail.com>,
hermann pitton <hermann-pitton@arcor.de>
Cc: video4linux-list@redhat.com
Subject: Re: Leadtek Winfast TV2100
Date: Sat, 21 Nov 2009 19:53:01 +0000 (GMT) [thread overview]
Message-ID: <605670.16248.qm@web28413.mail.ukl.yahoo.com> (raw)
In-Reply-To: <6ab2c27e0911210107u14768841h1f084ee4215bab33@mail.gmail.com>
Hey Terry,
Thanks for your input. Yes it would seem that my tuner is not supported (it's a YMEC Tvision TVF88T5-B/DFF), and neither is my board. But I was hoping that an existing board/tuner combination might do the job.
@Hermann - I tried card IDs 1-150 with tuner=69 and - alas - didn't get sound. Interestingly enough, almost all card ids produce a picture with this tuner. Also, I noticed that with some board IDs I'm getting clicks when muting/unmuting or switching channels, but no broadcast sound whatsoever...:(
I also tried running regspy.exe (after booting to Windows) and performed the test as described on dscaler site. But the results are way to cryptic for me...I have no clue how to use this. So I'll paste it here, and maybe someone will be able to draw a conclusion:
SAA7130 Card [0]:
Vendor ID: 0x1131
Device ID: 0x7130
Subsystem ID: 0x6f3a107d
7 states dumped
----------------------------------------------------------------------------------
SAA7130 Card - State 0:
SAA7134_GPIO_GPMODE: 80000009 * (10000000 00000000 00000000 00001001)
SAA7134_GPIO_GPSTATUS: 0606200c * (00000110 00000110 00100000 00001100)
SAA7134_ANALOG_IN_CTRL1: c1 (11000001)
SAA7134_ANALOG_IO_SELECT: 3b * (00111011)
SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL8: 00 (00000000)
SAA7134_I2S_OUTPUT_SELECT: 00 (00000000)
SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001)
SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000)
SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001)
SAA7134_TS_PARALLEL: 04 (00000100)
SAA7134_TS_PARALLEL_SERIAL: 00 (00000000)
SAA7134_TS_SERIAL0: 00 (00000000)
SAA7134_TS_SERIAL1: 00 (00000000)
SAA7134_TS_DMA0: 00 (00000000)
SAA7134_TS_DMA1: 00 (00000000)
SAA7134_TS_DMA2: 00 (00000000)
SAA7134_SPECIAL_MODE: 01 (00000001)
Changes: State 0 -> State 1:
SAA7134_GPIO_GPMODE: 80000009 -> 8000000d (-------- -------- -------- -----0--)
SAA7134_GPIO_GPSTATUS: 0606200c -> 00062000 (-----11- -------- -------- ----11--)
SAA7134_ANALOG_IO_SELECT: 3b -> 00 (--111-11)
3 changes
----------------------------------------------------------------------------------
SAA7130 Card - State 1:
SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 00001101) (was: 80000009)
SAA7134_GPIO_GPSTATUS: 00062000 * (00000000 00000110 00100000 00000000) (was: 0606200c)
SAA7134_ANALOG_IN_CTRL1: c1 * (11000001)
SAA7134_ANALOG_IO_SELECT: 00 * (00000000) (was: 3b)
SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL8: 00 (00000000)
SAA7134_I2S_OUTPUT_SELECT: 00 (00000000)
SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001)
SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000)
SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001)
SAA7134_TS_PARALLEL: 04 (00000100)
SAA7134_TS_PARALLEL_SERIAL: 00 (00000000)
SAA7134_TS_SERIAL0: 00 (00000000)
SAA7134_TS_SERIAL1: 00 (00000000)
SAA7134_TS_DMA0: 00 (00000000)
SAA7134_TS_DMA1: 00 (00000000)
SAA7134_TS_DMA2: 00 (00000000)
SAA7134_SPECIAL_MODE: 01 (00000001)
Changes: State 1 -> State 2:
SAA7134_GPIO_GPSTATUS: 00062000 -> 00062008 (-------- -------- -------- ----0---)
SAA7134_ANALOG_IN_CTRL1: c1 -> 83 (-1----0-)
SAA7134_ANALOG_IO_SELECT: 00 -> 09 (----0--0)
3 changes
----------------------------------------------------------------------------------
SAA7130 Card - State 2:
SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 00001101)
SAA7134_GPIO_GPSTATUS: 00062008 (00000000 00000110 00100000 00001000) (was: 00062000)
SAA7134_ANALOG_IN_CTRL1: 83 * (10000011) (was: c1)
SAA7134_ANALOG_IO_SELECT: 09 (00001001) (was: 00)
SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL8: 00 (00000000)
SAA7134_I2S_OUTPUT_SELECT: 00 (00000000)
SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001)
SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000)
SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001)
SAA7134_TS_PARALLEL: 04 (00000100)
SAA7134_TS_PARALLEL_SERIAL: 00 (00000000)
SAA7134_TS_SERIAL0: 00 (00000000)
SAA7134_TS_SERIAL1: 00 (00000000)
SAA7134_TS_DMA0: 00 (00000000)
SAA7134_TS_DMA1: 00 (00000000)
SAA7134_TS_DMA2: 00 (00000000)
SAA7134_SPECIAL_MODE: 01 (00000001)
Changes: State 2 -> State 3:
SAA7134_ANALOG_IN_CTRL1: 83 -> c8 (-0--0-11)
1 changes
----------------------------------------------------------------------------------
SAA7130 Card - State 3:
SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 00001101)
SAA7134_GPIO_GPSTATUS: 00062008 * (00000000 00000110 00100000 00001000)
SAA7134_ANALOG_IN_CTRL1: c8 * (11001000) (was: 83)
SAA7134_ANALOG_IO_SELECT: 09 * (00001001)
SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL8: 00 (00000000)
SAA7134_I2S_OUTPUT_SELECT: 00 (00000000)
SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001)
SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000)
SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001)
SAA7134_TS_PARALLEL: 04 (00000100)
SAA7134_TS_PARALLEL_SERIAL: 00 (00000000)
SAA7134_TS_SERIAL0: 00 (00000000)
SAA7134_TS_SERIAL1: 00 (00000000)
SAA7134_TS_DMA0: 00 (00000000)
SAA7134_TS_DMA1: 00 (00000000)
SAA7134_TS_DMA2: 00 (00000000)
SAA7134_SPECIAL_MODE: 01 (00000001)
Changes: State 3 -> State 4:
SAA7134_GPIO_GPSTATUS: 00062008 -> 04062004 (-----0-- -------- -------- ----10--)
SAA7134_ANALOG_IN_CTRL1: c8 -> c1 (----1--0) (same as 0, 1)
SAA7134_ANALOG_IO_SELECT: 09 -> 00 (----1--1) (same as 1)
3 changes
----------------------------------------------------------------------------------
SAA7130 Card - State 4:
SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 00001101)
SAA7134_GPIO_GPSTATUS: 04062004 * (00000100 00000110 00100000 00000100) (was: 00062008)
SAA7134_ANALOG_IN_CTRL1: c1 (11000001) (was: c8)
SAA7134_ANALOG_IO_SELECT: 00 (00000000) (was: 09)
SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL8: 00 (00000000)
SAA7134_I2S_OUTPUT_SELECT: 00 (00000000)
SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001)
SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000)
SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001)
SAA7134_TS_PARALLEL: 04 (00000100)
SAA7134_TS_PARALLEL_SERIAL: 00 (00000000)
SAA7134_TS_SERIAL0: 00 (00000000)
SAA7134_TS_SERIAL1: 00 (00000000)
SAA7134_TS_DMA0: 00 (00000000)
SAA7134_TS_DMA1: 00 (00000000)
SAA7134_TS_DMA2: 00 (00000000)
SAA7134_SPECIAL_MODE: 01 (00000001)
Changes: State 4 -> State 5:
SAA7134_GPIO_GPSTATUS: 04062004 -> 02062000 (-----10- -------- -------- -----1--)
1 changes
----------------------------------------------------------------------------------
SAA7130 Card - State 5:
SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 00001101)
SAA7134_GPIO_GPSTATUS: 02062000 * (00000010 00000110 00100000 00000000) (was: 04062004)
SAA7134_ANALOG_IN_CTRL1: c1 (11000001)
SAA7134_ANALOG_IO_SELECT: 00 * (00000000)
SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL8: 00 (00000000)
SAA7134_I2S_OUTPUT_SELECT: 00 (00000000)
SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001)
SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000)
SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001)
SAA7134_TS_PARALLEL: 04 (00000100)
SAA7134_TS_PARALLEL_SERIAL: 00 (00000000)
SAA7134_TS_SERIAL0: 00 (00000000)
SAA7134_TS_SERIAL1: 00 (00000000)
SAA7134_TS_DMA0: 00 (00000000)
SAA7134_TS_DMA1: 00 (00000000)
SAA7134_TS_DMA2: 00 (00000000)
SAA7134_SPECIAL_MODE: 01 (00000001)
Changes: State 5 -> Register Dump:
SAA7134_GPIO_GPSTATUS: 02062000 -> 06062008 (-----0-- -------- -------- ----0---)
SAA7134_ANALOG_IO_SELECT: 00 -> 02 (------0-)
2 changes
=================================================================================
SAA7130 Card - Register Dump:
SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 00001101)
SAA7134_GPIO_GPSTATUS: 06062008 (00000110 00000110 00100000 00001000) (was: 02062000)
SAA7134_ANALOG_IN_CTRL1: c1 (11000001)
SAA7134_ANALOG_IO_SELECT: 02 (00000010) (was: 00)
SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000)
SAA7134_VIDEO_PORT_CTRL8: 00 (00000000)
SAA7134_I2S_OUTPUT_SELECT: 00 (00000000)
SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001)
SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000)
SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001)
SAA7134_TS_PARALLEL: 04 (00000100)
SAA7134_TS_PARALLEL_SERIAL: 00 (00000000)
SAA7134_TS_SERIAL0: 00 (00000000)
SAA7134_TS_SERIAL1: 00 (00000000)
SAA7134_TS_DMA0: 00 (00000000)
SAA7134_TS_DMA1: 00 (00000000)
SAA7134_TS_DMA2: 00 (00000000)
SAA7134_SPECIAL_MODE: 01 (00000001)
end of dump
Here is the order in which I performed the test:State 6
State 0 - viewing software off
State 1 - tuner mode
State 2 - composite mode
State 3 - s video mode
State 4 - radio mode
State 5 - tuner mode (again)
Final dump - viewing software off (again)
Thanks to everyone for your help.
Pavle.
________________________________
From: Terry Wu <terrywu2009@gmail.com>
To: hermann pitton <hermann-pitton@arcor.de>
Cc: Pavle Predic <pavle.predic@yahoo.co.uk>; video4linux-list@redhat.com
Sent: Sat, 21 November, 2009 10:07:05
Subject: Re: Leadtek Winfast TV2100
Hi,
There are many models of TV2100.
Different model uses different TV tuner.
The tuner 69 is TUNER_TNF_5335MF.
Make sure the tuner in your TV2100 card is the TNF_5335MF.
Maybe the tuner in your TV2100 card is not supported by current
v4l-dvb driver yet (linux\include\media\tuner.h).
Terry
2009/11/21 hermann pitton <hermann-pitton@arcor.de>:
> Hi Pavle,
>
> Am Freitag, den 20.11.2009, 14:11 +0000 schrieb Pavle Predic:
>> Hi Hermann,
>>
>> Thank you so much for your help. I didn't really get most of what you
>> said (way to technical for me), but at least I know now which tuner I
>> should use, so I'll keep testing with tuner 69 and see if I get
>> results.
>
> that one should be right, especially for analog radio.
>
>> BTW, I'm not from UK - I'm from Serbia and I'm trying to make the card
>> work for my cable tv which uses PAL BG (at least so they say).
>
> Lots of people are on the move these days, therefore it is important to
> know too, what they might carry with them. That tuner should be fine
> then.
>
>> I'll report back after testing on tuner 69 (I'll simply try all card
>> ids with this tuner id). In the meantime here's some more info:
>
> Better is to follow the advice how you can narrow down such stuff.
>
> As far I know, we have not destroyed a single device yet on the saa7134
> driver, but to go over all possibilities, concerning voltage and gpios,
> has some risks and is not the shortest way to come closer.
>
> Thanks for your input.
>
> Cheers,
> Hermann
>
>> dmesg:
>>
>> [ 9.829338] saa7130/34: v4l2 driver version 0.2.15 loaded
>> [ 9.829408] saa7134 0000:00:08.0: PCI INT A -> GSI 17 (level, low)
>> -> IRQ 17
>> [ 9.829419] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 17,
>> latency: 64, mmio: 0xfdffe000
>> [ 9.829428] saa7130[0]: subsystem: 107d:6f3a, board:
>> UNKNOWN/GENERIC [card=0,autodetected]
>> [ 9.829458] saa7130[0]: board init: gpio is 6200c
>> [ 9.829465] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on
>> shared IRQs
>> [ 9.980513] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43
>> 43 a9 1c 55 d2 b2 92
>> [ 9.980532] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980547] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08
>> ff 00 8c ff ff ff ff
>> [ 9.980562] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980578] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02
>> ff ff ff ff ff ff ff
>> [ 9.980593] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980608] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980623] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980639] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980654] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980670] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980685] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980701] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980716] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980731] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980747] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff
>> ff ff ff ff ff ff ff
>> [ 9.980876] saa7130[0]: registered device video0 [v4l2]
>> [ 9.980908] saa7130[0]: registered device vbi0
>>
>>
>> lsmod:
>>
>> saa7134 135552 0
>> ir_common 47172 1 saa7134
>> v4l2_common 14308 1 saa7134
>> videodev 31040 2 saa7134,v4l2_common
>> videobuf_dma_sg 11340 1 saa7134
>> videobuf_core 16164 2 saa7134,videobuf_dma_sg
>> tveeprom 10720 1 saa7134
>> i2c_core 20844 4
>> i2c_viapro,saa7134,v4l2_common,tveeprom
>>
>> lspci:
>>
>> 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7130
>> Video Broadcast Decoder [1131:7130] (rev 01)
>> Subsystem: LeadTek Research Inc. Device [107d:6f3a]
>> Flags: bus master, medium devsel, latency 64, IRQ 17
>> Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: [40] Power Management version 1
>> Kernel driver in use: saa7134
>> Kernel modules: saa7134
>>
>> Thanks again,
>>
>> Pavle.
>>
>>
>>
>>
>>
>> ______________________________________________________________________
>> From: hermann pitton <hermann-pitton@arcor.de>
>> To: Pavle Predic <pavle.predic@yahoo.co.uk>
>> Cc: video4linux-list@redhat.com
>> Sent: Sun, 8 November, 2009 23:35:08
>> Subject: Re: Leadtek Winfast TV2100
>>
>> Hi Pavle,
>>
>> Am Sonntag, den 08.11.2009, 17:11 +0000 schrieb Pavle Predic:
>> > Did anyone manage to get this card working on Linux? I got the
>> picture out of the box, but it's impossible to get any sound from the
>> damned thing. The card is not on CARDLIST.saa7134, but I assume a
>> similar card/tuner combination can be used. But which? By the way, I
>> got the speakers connected directly to card output, I'm not even
>> trying to get it working with my sound card. I can hear clicks when
>> loading/unloading modules, so it's alive but not set up properly.
>> >
>> > Any info would be greatly appreciated. Perhaps someone knows of
>> another card that is similar to this one?
>> >
>> > Card info:
>> > Chipset: saa7134
>> > Tuner: Tvision TVF88T5-B/DFF
>> > Card numbers that produce picture (modprobe saa7134 card=$n): 3, 7,
>> 10, 16, 34, 35, 45, 46, 47, 48, 51, 63, 64, 68
>>
>> that is not enough information yet.
>>
>> The correct tuner for this one is tuner=69.
>>
>> Only with this one you will have also radio support.
>>
>> Since you mail from an UK mail provider, this tuner is not expected to
>> work with PAL-I TV stereo sound there, but radio would work.
>>
>> Else, if neither amux = TV nor amux = LINE1 or LINE2 (LINE inputs for
>> TV
>> sound are only found on saa7130 chips, except there is also an extra
>> TV
>> mono section directly from the tuner) work for TV sound, most often
>> an
>> external audio mux is in the way and needs to be configured correctly
>> with saa7134 gpio pins. Looking also at the minor chips on the card
>> with
>> more than 3 pins can reveal such a mux.
>>
>> There is also a software test on such hardware, succeeding in most
>> cases.
>>
>> By default, external analog audio input is looped through to analog
>> audio out, on which you are listening, if the driver is unloaded.
>>
>> On a saa7134 chip, on saa7130 are some known specials, you should hear
>> the incoming sound directly on your headphones or what else you might
>> be
>> using directly connected to your card, trying on LINE1 and LINE2 for
>> that.
>>
>> If not, you can expect that such a mux chip needs to be treated
>> correctly.
>>
>> The DScaler (deinterlace.sf.net) regspy.exe often can help to identify
>> such gpios in use, else you must trace lines and resistors on it.
>>
>> In general, an absolute minimum is to provide related "dmesg" after
>> loading the driver _without_ having tried on other cards previously.
>>
>> Please read more on the linuxtv.org wiki about adding support for a
>> new
>> card.
>>
>> Cheers,
>> Hermann
>
>
>
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next prev parent reply other threads:[~2009-11-21 19:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-08 17:11 Leadtek Winfast TV2100 Pavle Predic
2009-11-08 22:35 ` hermann pitton
2009-11-20 14:11 ` Pavle Predic
2009-11-21 0:21 ` hermann pitton
2009-11-21 9:07 ` Terry Wu
2009-11-21 19:53 ` Pavle Predic [this message]
2010-01-03 15:37 dz-tor
2010-01-08 19:34 ` hermann pitton
2010-01-08 22:56 ` dz-tor
2010-01-09 14:46 ` Pavle Predic
2010-01-09 16:23 ` dz-tor
2010-01-09 17:14 ` hermann pitton
2010-01-09 22:48 ` hermann pitton
2010-01-10 21:26 ` dz-tor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=605670.16248.qm@web28413.mail.ukl.yahoo.com \
--to=pavle.predic@yahoo.co.uk \
--cc=hermann-pitton@arcor.de \
--cc=terrywu2009@gmail.com \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.