[PATCH] ARM: tegra: fix erroneous address in dts

[PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
specification inside the dts is wrong. Fix it and use the correct
address.

Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 941f362..f4d8125 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1386,7 +1386,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@70006000 {
+	serial@0,70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1398,7 +1398,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@70006040 {
+	serial@0,70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
-- 
2.7.3

[PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
specification inside the dts is wrong. Fix it and use the correct
address.

Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 941f362..f4d8125 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1386,7 +1386,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial at 70006000 {
+	serial at 0,70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1398,7 +1398,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial at 70006040 {
+	serial at 0,70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
-- 
2.7.3

[PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
specification inside the dts is wrong. Fix it and use the correct
address.

Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 941f362..f4d8125 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1386,7 +1386,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@70006000 {
+	serial@0,70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1398,7 +1398,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@70006040 {
+	serial@0,70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
-- 
2.7.3

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 729 bytes --]

On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
> specification inside the dts is wrong. Fix it and use the correct
> address.
> 
> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
> ---
>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

These addresses are correct. The 0, prefix was dropped from the unit
address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
addresses on Tegra124").

What's the problem that you're seeing? What's not working for you?

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH] ARM: tegra: fix erroneous address in dts

[Thierry Reding]

On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
> specification inside the dts is wrong. Fix it and use the correct
> address.
> 
> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
> ---
>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

These addresses are correct. The 0, prefix was dropped from the unit
address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
addresses on Tegra124").

What's the problem that you're seeing? What's not working for you?

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160715/3a6806c6/attachment.sig>

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

[-- Attachment #1.1: Type: text/plain, Size: 1462 bytes --]

On 07/15/2016 12:02 AM, Thierry Reding wrote:
> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>> specification inside the dts is wrong. Fix it and use the correct
>> address.
>>
>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
>> Signed-off-by: Ralf Ramsauer <ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> These addresses are correct. The 0, prefix was dropped from the unit
> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
> addresses on Tegra124").
> 
> What's the problem that you're seeing? What's not working for you?
I cannot find b5896f67ab3c neither in swarren's tree nor in linux
upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
matches your described changes and was committed on 1st of July. But
this patch is not upstream yet, while the other patch is.

Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
erroneous as they still use the 0, annotation. And I just realised, that
somehow, upstream patch c90bb7b slightly differs from my initial patch
[1] on the mailing list.

  Ralf

[1] http://permalink.gmane.org/gmane.linux.ports.tegra/24779
> 
> Thierry
> 

-- 
Ralf Ramsauer
PGP: 0x8F10049B


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

On 07/15/2016 12:02 AM, Thierry Reding wrote:
> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>> specification inside the dts is wrong. Fix it and use the correct
>> address.
>>
>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
>> ---
>>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> These addresses are correct. The 0, prefix was dropped from the unit
> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
> addresses on Tegra124").
> 
> What's the problem that you're seeing? What's not working for you?
I cannot find b5896f67ab3c neither in swarren's tree nor in linux
upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
matches your described changes and was committed on 1st of July. But
this patch is not upstream yet, while the other patch is.

Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
erroneous as they still use the 0, annotation. And I just realised, that
somehow, upstream patch c90bb7b slightly differs from my initial patch
[1] on the mailing list.

  Ralf

[1] http://permalink.gmane.org/gmane.linux.ports.tegra/24779
> 
> Thierry
> 

-- 
Ralf Ramsauer
PGP: 0x8F10049B

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160715/dbf98a2c/attachment.sig>

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

[-- Attachment #1.1: Type: text/plain, Size: 1435 bytes --]

On 07/15/2016 12:02 AM, Thierry Reding wrote:
> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>> specification inside the dts is wrong. Fix it and use the correct
>> address.
>>
>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
>> ---
>>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> These addresses are correct. The 0, prefix was dropped from the unit
> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
> addresses on Tegra124").
> 
> What's the problem that you're seeing? What's not working for you?
I cannot find b5896f67ab3c neither in swarren's tree nor in linux
upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
matches your described changes and was committed on 1st of July. But
this patch is not upstream yet, while the other patch is.

Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
erroneous as they still use the 0, annotation. And I just realised, that
somehow, upstream patch c90bb7b slightly differs from my initial patch
[1] on the mailing list.

  Ralf

[1] http://permalink.gmane.org/gmane.linux.ports.tegra/24779
> 
> Thierry
> 

-- 
Ralf Ramsauer
PGP: 0x8F10049B


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Stephen Warren]

On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>> specification inside the dts is wrong. Fix it and use the correct
>>> address.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
>>> Signed-off-by: Ralf Ramsauer <ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
>>> ---
>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> These addresses are correct. The 0, prefix was dropped from the unit
>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>> addresses on Tegra124").
>>
>> What's the problem that you're seeing? What's not working for you?
 >
> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
> matches your described changes and was committed on 1st of July. But
> this patch is not upstream yet, while the other patch is.

The fix is in linux-next, and will be in mainline soon I expect.

My github linux-tegra.git isn't relevant since it's just my own personal 
dev branch, but for reference, the commit is there since it's based on 
linux-next.

> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
> erroneous as they still use the 0, annotation. And I just realised, that
> somehow, upstream patch c90bb7b slightly differs from my initial patch
> [1] on the mailing list.

Your patch should probably be CC: stable so that existing kernel 
versions get fixed. That said, I'd argue that since the original patch 
never actually had any effect since it applied to the wrong node, the 
best fix for stable kernels is simply to revert it rather than fixing 
it, to avoid the potential for behaviour changes and regressions. 
Starting with kernel 4.8 (I think), that patch will begin to have actual 
effect.

[PATCH] ARM: tegra: fix erroneous address in dts

[Stephen Warren]

On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>> specification inside the dts is wrong. Fix it and use the correct
>>> address.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
>>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
>>> ---
>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> These addresses are correct. The 0, prefix was dropped from the unit
>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>> addresses on Tegra124").
>>
>> What's the problem that you're seeing? What's not working for you?
 >
> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
> matches your described changes and was committed on 1st of July. But
> this patch is not upstream yet, while the other patch is.

The fix is in linux-next, and will be in mainline soon I expect.

My github linux-tegra.git isn't relevant since it's just my own personal 
dev branch, but for reference, the commit is there since it's based on 
linux-next.

> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
> erroneous as they still use the 0, annotation. And I just realised, that
> somehow, upstream patch c90bb7b slightly differs from my initial patch
> [1] on the mailing list.

Your patch should probably be CC: stable so that existing kernel 
versions get fixed. That said, I'd argue that since the original patch 
never actually had any effect since it applied to the wrong node, the 
best fix for stable kernels is simply to revert it rather than fixing 
it, to avoid the potential for behaviour changes and regressions. 
Starting with kernel 4.8 (I think), that patch will begin to have actual 
effect.

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Stephen Warren]

On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>> specification inside the dts is wrong. Fix it and use the correct
>>> address.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
>>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
>>> ---
>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> These addresses are correct. The 0, prefix was dropped from the unit
>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>> addresses on Tegra124").
>>
>> What's the problem that you're seeing? What's not working for you?
 >
> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
> matches your described changes and was committed on 1st of July. But
> this patch is not upstream yet, while the other patch is.

The fix is in linux-next, and will be in mainline soon I expect.

My github linux-tegra.git isn't relevant since it's just my own personal 
dev branch, but for reference, the commit is there since it's based on 
linux-next.

> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
> erroneous as they still use the 0, annotation. And I just realised, that
> somehow, upstream patch c90bb7b slightly differs from my initial patch
> [1] on the mailing list.

Your patch should probably be CC: stable so that existing kernel 
versions get fixed. That said, I'd argue that since the original patch 
never actually had any effect since it applied to the wrong node, the 
best fix for stable kernels is simply to revert it rather than fixing 
it, to avoid the potential for behaviour changes and regressions. 
Starting with kernel 4.8 (I think), that patch will begin to have actual 
effect.

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

[-- Attachment #1.1: Type: text/plain, Size: 2622 bytes --]

On 07/15/2016 06:01 PM, Stephen Warren wrote:
> On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
>> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>>> specification inside the dts is wrong. Fix it and use the correct
>>>> address.
>>>>
>>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
>>>> device tree")
>>>> Signed-off-by: Ralf Ramsauer <ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
>>>> ---
>>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> These addresses are correct. The 0, prefix was dropped from the unit
>>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>>> addresses on Tegra124").
>>>
>>> What's the problem that you're seeing? What's not working for you?
>>
>> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
>> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
>> matches your described changes and was committed on 1st of July. But
>> this patch is not upstream yet, while the other patch is.
> 
> The fix is in linux-next, and will be in mainline soon I expect.
Ah okay, but I still wonder how my original patch got changed on its
way... The original version on the mailinglist was not buggy.
> 
> My github linux-tegra.git isn't relevant since it's just my own personal
> dev branch, but for reference, the commit is there since it's based on
> linux-next.
> 
>> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
>> erroneous as they still use the 0, annotation. And I just realised, that
>> somehow, upstream patch c90bb7b slightly differs from my initial patch
>> [1] on the mailing list.
> 
> Your patch should probably be CC: stable so that existing kernel
> versions get fixed. That said, I'd argue that since the original patch
> never actually had any effect since it applied to the wrong node, the
> best fix for stable kernels is simply to revert it rather than fixing
> it, to avoid the potential for behaviour changes and regressions.
> Starting with kernel 4.8 (I think), that patch will begin to have actual
> effect.
There is no current existing stable kernel that is affected, as it went
in during the last merge window in 4.6-rc1. So no need for fixing
stable. Maybe it's still possible to fix it as the stabilisation window
is still open and 4.7 is not released yet?

  Ralf
-- 
Ralf Ramsauer
PGP: 0x8F10049B


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

On 07/15/2016 06:01 PM, Stephen Warren wrote:
> On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
>> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>>> specification inside the dts is wrong. Fix it and use the correct
>>>> address.
>>>>
>>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
>>>> device tree")
>>>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
>>>> ---
>>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> These addresses are correct. The 0, prefix was dropped from the unit
>>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>>> addresses on Tegra124").
>>>
>>> What's the problem that you're seeing? What's not working for you?
>>
>> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
>> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
>> matches your described changes and was committed on 1st of July. But
>> this patch is not upstream yet, while the other patch is.
> 
> The fix is in linux-next, and will be in mainline soon I expect.
Ah okay, but I still wonder how my original patch got changed on its
way... The original version on the mailinglist was not buggy.
> 
> My github linux-tegra.git isn't relevant since it's just my own personal
> dev branch, but for reference, the commit is there since it's based on
> linux-next.
> 
>> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
>> erroneous as they still use the 0, annotation. And I just realised, that
>> somehow, upstream patch c90bb7b slightly differs from my initial patch
>> [1] on the mailing list.
> 
> Your patch should probably be CC: stable so that existing kernel
> versions get fixed. That said, I'd argue that since the original patch
> never actually had any effect since it applied to the wrong node, the
> best fix for stable kernels is simply to revert it rather than fixing
> it, to avoid the potential for behaviour changes and regressions.
> Starting with kernel 4.8 (I think), that patch will begin to have actual
> effect.
There is no current existing stable kernel that is affected, as it went
in during the last merge window in 4.6-rc1. So no need for fixing
stable. Maybe it's still possible to fix it as the stabilisation window
is still open and 4.7 is not released yet?

  Ralf
-- 
Ralf Ramsauer
PGP: 0x8F10049B

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160715/5dd8cd39/attachment.sig>

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

[-- Attachment #1.1: Type: text/plain, Size: 2595 bytes --]

On 07/15/2016 06:01 PM, Stephen Warren wrote:
> On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
>> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>>> specification inside the dts is wrong. Fix it and use the correct
>>>> address.
>>>>
>>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
>>>> device tree")
>>>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
>>>> ---
>>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> These addresses are correct. The 0, prefix was dropped from the unit
>>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>>> addresses on Tegra124").
>>>
>>> What's the problem that you're seeing? What's not working for you?
>>
>> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
>> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
>> matches your described changes and was committed on 1st of July. But
>> this patch is not upstream yet, while the other patch is.
> 
> The fix is in linux-next, and will be in mainline soon I expect.
Ah okay, but I still wonder how my original patch got changed on its
way... The original version on the mailinglist was not buggy.
> 
> My github linux-tegra.git isn't relevant since it's just my own personal
> dev branch, but for reference, the commit is there since it's based on
> linux-next.
> 
>> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
>> erroneous as they still use the 0, annotation. And I just realised, that
>> somehow, upstream patch c90bb7b slightly differs from my initial patch
>> [1] on the mailing list.
> 
> Your patch should probably be CC: stable so that existing kernel
> versions get fixed. That said, I'd argue that since the original patch
> never actually had any effect since it applied to the wrong node, the
> best fix for stable kernels is simply to revert it rather than fixing
> it, to avoid the potential for behaviour changes and regressions.
> Starting with kernel 4.8 (I think), that patch will begin to have actual
> effect.
There is no current existing stable kernel that is affected, as it went
in during the last merge window in 4.6-rc1. So no need for fixing
stable. Maybe it's still possible to fix it as the stabilisation window
is still open and 4.7 is not released yet?

  Ralf
-- 
Ralf Ramsauer
PGP: 0x8F10049B


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 4058 bytes --]

On Fri, Jul 15, 2016 at 06:18:03PM +0200, Ralf Ramsauer wrote:
> On 07/15/2016 06:01 PM, Stephen Warren wrote:
> > On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
> >> On 07/15/2016 12:02 AM, Thierry Reding wrote:
> >>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
> >>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
> >>>> specification inside the dts is wrong. Fix it and use the correct
> >>>> address.
> >>>>
> >>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
> >>>> device tree")
> >>>> Signed-off-by: Ralf Ramsauer <ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
> >>>> ---
> >>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> >>>>   1 file changed, 2 insertions(+), 2 deletions(-)
> >>>
> >>> These addresses are correct. The 0, prefix was dropped from the unit
> >>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
> >>> addresses on Tegra124").
> >>>
> >>> What's the problem that you're seeing? What's not working for you?
> >>
> >> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
> >> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
> >> matches your described changes and was committed on 1st of July. But
> >> this patch is not upstream yet, while the other patch is.
> > 
> > The fix is in linux-next, and will be in mainline soon I expect.
> Ah okay, but I still wonder how my original patch got changed on its
> way... The original version on the mailinglist was not buggy.

It's most likely my fault. My recollection is that we used to have an
earlier patch that removed all 0, prefixes from unit addresses and what
happens is probably that I applied your patch on top, adjusted it to
omit the 0, prefix and then we noticed that removing the 0, prefix does
not work for the GPU (because U-Boot looks it up by node name to enable
it), so the patch that removes the 0, prefix was dropped and I forgot
to adjust your patch to compensate.

> > My github linux-tegra.git isn't relevant since it's just my own personal
> > dev branch, but for reference, the commit is there since it's based on
> > linux-next.
> > 
> >> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
> >> erroneous as they still use the 0, annotation. And I just realised, that
> >> somehow, upstream patch c90bb7b slightly differs from my initial patch
> >> [1] on the mailing list.
> > 
> > Your patch should probably be CC: stable so that existing kernel
> > versions get fixed. That said, I'd argue that since the original patch
> > never actually had any effect since it applied to the wrong node, the
> > best fix for stable kernels is simply to revert it rather than fixing
> > it, to avoid the potential for behaviour changes and regressions.
> > Starting with kernel 4.8 (I think), that patch will begin to have actual
> > effect.
> There is no current existing stable kernel that is affected, as it went
> in during the last merge window in 4.6-rc1. So no need for fixing
> stable. Maybe it's still possible to fix it as the stabilisation window
> is still open and 4.7 is not released yet?

Unfortunately a patch to remove the 0, prefix from all nodes except the
GPU was now merged into the arm-soc tree, which means that if we try to
get this into v4.7, then we'll have to make sure to patch up the unit
address again for v4.8.

I have no objections to doing that, so feel free to add my Acked-by and
resend this to arm-DgEjT+Ai2yi4UlQgPVntAg@public.gmane.org When you do, please keep linux-tegra in
Cc so that we can track it, and maybe mention that you want this to go
into v4.7 and how this came about to be, so that the arm-soc maintainers
won't be surprised when the patch to revert this shows up in a couple of
days for v4.8.

Can you take care of sending out the second patch as well? Probably best
to send it the same way as this, with a mention that it's targetted at
v4.8 and a revert of this one.

Thanks,
Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH] ARM: tegra: fix erroneous address in dts

[Thierry Reding]

On Fri, Jul 15, 2016 at 06:18:03PM +0200, Ralf Ramsauer wrote:
> On 07/15/2016 06:01 PM, Stephen Warren wrote:
> > On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
> >> On 07/15/2016 12:02 AM, Thierry Reding wrote:
> >>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
> >>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
> >>>> specification inside the dts is wrong. Fix it and use the correct
> >>>> address.
> >>>>
> >>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
> >>>> device tree")
> >>>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
> >>>> ---
> >>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> >>>>   1 file changed, 2 insertions(+), 2 deletions(-)
> >>>
> >>> These addresses are correct. The 0, prefix was dropped from the unit
> >>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
> >>> addresses on Tegra124").
> >>>
> >>> What's the problem that you're seeing? What's not working for you?
> >>
> >> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
> >> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
> >> matches your described changes and was committed on 1st of July. But
> >> this patch is not upstream yet, while the other patch is.
> > 
> > The fix is in linux-next, and will be in mainline soon I expect.
> Ah okay, but I still wonder how my original patch got changed on its
> way... The original version on the mailinglist was not buggy.

It's most likely my fault. My recollection is that we used to have an
earlier patch that removed all 0, prefixes from unit addresses and what
happens is probably that I applied your patch on top, adjusted it to
omit the 0, prefix and then we noticed that removing the 0, prefix does
not work for the GPU (because U-Boot looks it up by node name to enable
it), so the patch that removes the 0, prefix was dropped and I forgot
to adjust your patch to compensate.

> > My github linux-tegra.git isn't relevant since it's just my own personal
> > dev branch, but for reference, the commit is there since it's based on
> > linux-next.
> > 
> >> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
> >> erroneous as they still use the 0, annotation. And I just realised, that
> >> somehow, upstream patch c90bb7b slightly differs from my initial patch
> >> [1] on the mailing list.
> > 
> > Your patch should probably be CC: stable so that existing kernel
> > versions get fixed. That said, I'd argue that since the original patch
> > never actually had any effect since it applied to the wrong node, the
> > best fix for stable kernels is simply to revert it rather than fixing
> > it, to avoid the potential for behaviour changes and regressions.
> > Starting with kernel 4.8 (I think), that patch will begin to have actual
> > effect.
> There is no current existing stable kernel that is affected, as it went
> in during the last merge window in 4.6-rc1. So no need for fixing
> stable. Maybe it's still possible to fix it as the stabilisation window
> is still open and 4.7 is not released yet?

Unfortunately a patch to remove the 0, prefix from all nodes except the
GPU was now merged into the arm-soc tree, which means that if we try to
get this into v4.7, then we'll have to make sure to patch up the unit
address again for v4.8.

I have no objections to doing that, so feel free to add my Acked-by and
resend this to arm at kernel.org. When you do, please keep linux-tegra in
Cc so that we can track it, and maybe mention that you want this to go
into v4.7 and how this came about to be, so that the arm-soc maintainers
won't be surprised when the patch to revert this shows up in a couple of
days for v4.8.

Can you take care of sending out the second patch as well? Probably best
to send it the same way as this, with a mention that it's targetted at
v4.8 and a revert of this one.

Thanks,
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160718/5420afc8/attachment.sig>

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 4003 bytes --]

On Fri, Jul 15, 2016 at 06:18:03PM +0200, Ralf Ramsauer wrote:
> On 07/15/2016 06:01 PM, Stephen Warren wrote:
> > On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
> >> On 07/15/2016 12:02 AM, Thierry Reding wrote:
> >>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
> >>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
> >>>> specification inside the dts is wrong. Fix it and use the correct
> >>>> address.
> >>>>
> >>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
> >>>> device tree")
> >>>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
> >>>> ---
> >>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> >>>>   1 file changed, 2 insertions(+), 2 deletions(-)
> >>>
> >>> These addresses are correct. The 0, prefix was dropped from the unit
> >>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
> >>> addresses on Tegra124").
> >>>
> >>> What's the problem that you're seeing? What's not working for you?
> >>
> >> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
> >> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
> >> matches your described changes and was committed on 1st of July. But
> >> this patch is not upstream yet, while the other patch is.
> > 
> > The fix is in linux-next, and will be in mainline soon I expect.
> Ah okay, but I still wonder how my original patch got changed on its
> way... The original version on the mailinglist was not buggy.

It's most likely my fault. My recollection is that we used to have an
earlier patch that removed all 0, prefixes from unit addresses and what
happens is probably that I applied your patch on top, adjusted it to
omit the 0, prefix and then we noticed that removing the 0, prefix does
not work for the GPU (because U-Boot looks it up by node name to enable
it), so the patch that removes the 0, prefix was dropped and I forgot
to adjust your patch to compensate.

> > My github linux-tegra.git isn't relevant since it's just my own personal
> > dev branch, but for reference, the commit is there since it's based on
> > linux-next.
> > 
> >> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
> >> erroneous as they still use the 0, annotation. And I just realised, that
> >> somehow, upstream patch c90bb7b slightly differs from my initial patch
> >> [1] on the mailing list.
> > 
> > Your patch should probably be CC: stable so that existing kernel
> > versions get fixed. That said, I'd argue that since the original patch
> > never actually had any effect since it applied to the wrong node, the
> > best fix for stable kernels is simply to revert it rather than fixing
> > it, to avoid the potential for behaviour changes and regressions.
> > Starting with kernel 4.8 (I think), that patch will begin to have actual
> > effect.
> There is no current existing stable kernel that is affected, as it went
> in during the last merge window in 4.6-rc1. So no need for fixing
> stable. Maybe it's still possible to fix it as the stabilisation window
> is still open and 4.7 is not released yet?

Unfortunately a patch to remove the 0, prefix from all nodes except the
GPU was now merged into the arm-soc tree, which means that if we try to
get this into v4.7, then we'll have to make sure to patch up the unit
address again for v4.8.

I have no objections to doing that, so feel free to add my Acked-by and
resend this to arm@kernel.org. When you do, please keep linux-tegra in
Cc so that we can track it, and maybe mention that you want this to go
into v4.7 and how this came about to be, so that the arm-soc maintainers
won't be surprised when the patch to revert this shows up in a couple of
days for v4.8.

Can you take care of sending out the second patch as well? Probably best
to send it the same way as this, with a mention that it's targetted at
v4.8 and a revert of this one.

Thanks,
Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

[-- Attachment #1.1: Type: text/plain, Size: 4402 bytes --]



On 07/18/2016 08:01 AM, Thierry Reding wrote:
> On Fri, Jul 15, 2016 at 06:18:03PM +0200, Ralf Ramsauer wrote:
>> On 07/15/2016 06:01 PM, Stephen Warren wrote:
>>> On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
>>>> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>>>>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>>>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>>>>> specification inside the dts is wrong. Fix it and use the correct
>>>>>> address.
>>>>>>
>>>>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
>>>>>> device tree")
>>>>>> Signed-off-by: Ralf Ramsauer <ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
>>>>>> ---
>>>>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>>>
>>>>> These addresses are correct. The 0, prefix was dropped from the unit
>>>>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>>>>> addresses on Tegra124").
>>>>>
>>>>> What's the problem that you're seeing? What's not working for you?
>>>>
>>>> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
>>>> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
>>>> matches your described changes and was committed on 1st of July. But
>>>> this patch is not upstream yet, while the other patch is.
>>>
>>> The fix is in linux-next, and will be in mainline soon I expect.
>> Ah okay, but I still wonder how my original patch got changed on its
>> way... The original version on the mailinglist was not buggy.
> 
> It's most likely my fault. My recollection is that we used to have an
> earlier patch that removed all 0, prefixes from unit addresses and what
> happens is probably that I applied your patch on top, adjusted it to
> omit the 0, prefix and then we noticed that removing the 0, prefix does
> not work for the GPU (because U-Boot looks it up by node name to enable
> it), so the patch that removes the 0, prefix was dropped and I forgot
> to adjust your patch to compensate.
Ok, i see.
> 
>>> My github linux-tegra.git isn't relevant since it's just my own personal
>>> dev branch, but for reference, the commit is there since it's based on
>>> linux-next.
>>>
>>>> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
>>>> erroneous as they still use the 0, annotation. And I just realised, that
>>>> somehow, upstream patch c90bb7b slightly differs from my initial patch
>>>> [1] on the mailing list.
>>>
>>> Your patch should probably be CC: stable so that existing kernel
>>> versions get fixed. That said, I'd argue that since the original patch
>>> never actually had any effect since it applied to the wrong node, the
>>> best fix for stable kernels is simply to revert it rather than fixing
>>> it, to avoid the potential for behaviour changes and regressions.
>>> Starting with kernel 4.8 (I think), that patch will begin to have actual
>>> effect.
>> There is no current existing stable kernel that is affected, as it went
>> in during the last merge window in 4.6-rc1. So no need for fixing
>> stable. Maybe it's still possible to fix it as the stabilisation window
>> is still open and 4.7 is not released yet?
> 
> Unfortunately a patch to remove the 0, prefix from all nodes except the
> GPU was now merged into the arm-soc tree, which means that if we try to
> get this into v4.7, then we'll have to make sure to patch up the unit
> address again for v4.8.
> 
> I have no objections to doing that, so feel free to add my Acked-by and
> resend this to arm-DgEjT+Ai2yi4UlQgPVntAg@public.gmane.org When you do, please keep linux-tegra in
> Cc so that we can track it, and maybe mention that you want this to go
> into v4.7 and how this came about to be, so that the arm-soc maintainers
> won't be surprised when the patch to revert this shows up in a couple of
> days for v4.8.
Alright, I'll prepare it and add a RESEND as well as your Acked-by.
Thank you.
> 
> Can you take care of sending out the second patch as well? Probably best
> to send it the same way as this, with a mention that it's targetted at
> v4.8 and a revert of this one.
Yep, I'll take care of it. I'm tracking this patch since January in any
case :-)

  Ralf
> 
> Thanks,
> Thierry
> 

-- 
Ralf Ramsauer
PGP: 0x8F10049B


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

On 07/18/2016 08:01 AM, Thierry Reding wrote:
> On Fri, Jul 15, 2016 at 06:18:03PM +0200, Ralf Ramsauer wrote:
>> On 07/15/2016 06:01 PM, Stephen Warren wrote:
>>> On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
>>>> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>>>>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>>>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>>>>> specification inside the dts is wrong. Fix it and use the correct
>>>>>> address.
>>>>>>
>>>>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
>>>>>> device tree")
>>>>>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
>>>>>> ---
>>>>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>>>
>>>>> These addresses are correct. The 0, prefix was dropped from the unit
>>>>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>>>>> addresses on Tegra124").
>>>>>
>>>>> What's the problem that you're seeing? What's not working for you?
>>>>
>>>> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
>>>> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
>>>> matches your described changes and was committed on 1st of July. But
>>>> this patch is not upstream yet, while the other patch is.
>>>
>>> The fix is in linux-next, and will be in mainline soon I expect.
>> Ah okay, but I still wonder how my original patch got changed on its
>> way... The original version on the mailinglist was not buggy.
> 
> It's most likely my fault. My recollection is that we used to have an
> earlier patch that removed all 0, prefixes from unit addresses and what
> happens is probably that I applied your patch on top, adjusted it to
> omit the 0, prefix and then we noticed that removing the 0, prefix does
> not work for the GPU (because U-Boot looks it up by node name to enable
> it), so the patch that removes the 0, prefix was dropped and I forgot
> to adjust your patch to compensate.
Ok, i see.
> 
>>> My github linux-tegra.git isn't relevant since it's just my own personal
>>> dev branch, but for reference, the commit is there since it's based on
>>> linux-next.
>>>
>>>> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
>>>> erroneous as they still use the 0, annotation. And I just realised, that
>>>> somehow, upstream patch c90bb7b slightly differs from my initial patch
>>>> [1] on the mailing list.
>>>
>>> Your patch should probably be CC: stable so that existing kernel
>>> versions get fixed. That said, I'd argue that since the original patch
>>> never actually had any effect since it applied to the wrong node, the
>>> best fix for stable kernels is simply to revert it rather than fixing
>>> it, to avoid the potential for behaviour changes and regressions.
>>> Starting with kernel 4.8 (I think), that patch will begin to have actual
>>> effect.
>> There is no current existing stable kernel that is affected, as it went
>> in during the last merge window in 4.6-rc1. So no need for fixing
>> stable. Maybe it's still possible to fix it as the stabilisation window
>> is still open and 4.7 is not released yet?
> 
> Unfortunately a patch to remove the 0, prefix from all nodes except the
> GPU was now merged into the arm-soc tree, which means that if we try to
> get this into v4.7, then we'll have to make sure to patch up the unit
> address again for v4.8.
> 
> I have no objections to doing that, so feel free to add my Acked-by and
> resend this to arm at kernel.org. When you do, please keep linux-tegra in
> Cc so that we can track it, and maybe mention that you want this to go
> into v4.7 and how this came about to be, so that the arm-soc maintainers
> won't be surprised when the patch to revert this shows up in a couple of
> days for v4.8.
Alright, I'll prepare it and add a RESEND as well as your Acked-by.
Thank you.
> 
> Can you take care of sending out the second patch as well? Probably best
> to send it the same way as this, with a mention that it's targetted at
> v4.8 and a revert of this one.
Yep, I'll take care of it. I'm tracking this patch since January in any
case :-)

  Ralf
> 
> Thanks,
> Thierry
> 

-- 
Ralf Ramsauer
PGP: 0x8F10049B

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160718/38b77777/attachment.sig>

Re: [PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

[-- Attachment #1.1: Type: text/plain, Size: 4347 bytes --]



On 07/18/2016 08:01 AM, Thierry Reding wrote:
> On Fri, Jul 15, 2016 at 06:18:03PM +0200, Ralf Ramsauer wrote:
>> On 07/15/2016 06:01 PM, Stephen Warren wrote:
>>> On 07/15/2016 03:37 AM, Ralf Ramsauer wrote:
>>>> On 07/15/2016 12:02 AM, Thierry Reding wrote:
>>>>> On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote:
>>>>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address
>>>>>> specification inside the dts is wrong. Fix it and use the correct
>>>>>> address.
>>>>>>
>>>>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1
>>>>>> device tree")
>>>>>> Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
>>>>>> ---
>>>>>>   arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>>>
>>>>> These addresses are correct. The 0, prefix was dropped from the unit
>>>>> address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit
>>>>> addresses on Tegra124").
>>>>>
>>>>> What's the problem that you're seeing? What's not working for you?
>>>>
>>>> I cannot find b5896f67ab3c neither in swarren's tree nor in linux
>>>> upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that
>>>> matches your described changes and was committed on 1st of July. But
>>>> this patch is not upstream yet, while the other patch is.
>>>
>>> The fix is in linux-next, and will be in mainline soon I expect.
>> Ah okay, but I still wonder how my original patch got changed on its
>> way... The original version on the mailinglist was not buggy.
> 
> It's most likely my fault. My recollection is that we used to have an
> earlier patch that removed all 0, prefixes from unit addresses and what
> happens is probably that I applied your patch on top, adjusted it to
> omit the 0, prefix and then we noticed that removing the 0, prefix does
> not work for the GPU (because U-Boot looks it up by node name to enable
> it), so the patch that removes the 0, prefix was dropped and I forgot
> to adjust your patch to compensate.
Ok, i see.
> 
>>> My github linux-tegra.git isn't relevant since it's just my own personal
>>> dev branch, but for reference, the commit is there since it's based on
>>> linux-next.
>>>
>>>> Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are
>>>> erroneous as they still use the 0, annotation. And I just realised, that
>>>> somehow, upstream patch c90bb7b slightly differs from my initial patch
>>>> [1] on the mailing list.
>>>
>>> Your patch should probably be CC: stable so that existing kernel
>>> versions get fixed. That said, I'd argue that since the original patch
>>> never actually had any effect since it applied to the wrong node, the
>>> best fix for stable kernels is simply to revert it rather than fixing
>>> it, to avoid the potential for behaviour changes and regressions.
>>> Starting with kernel 4.8 (I think), that patch will begin to have actual
>>> effect.
>> There is no current existing stable kernel that is affected, as it went
>> in during the last merge window in 4.6-rc1. So no need for fixing
>> stable. Maybe it's still possible to fix it as the stabilisation window
>> is still open and 4.7 is not released yet?
> 
> Unfortunately a patch to remove the 0, prefix from all nodes except the
> GPU was now merged into the arm-soc tree, which means that if we try to
> get this into v4.7, then we'll have to make sure to patch up the unit
> address again for v4.8.
> 
> I have no objections to doing that, so feel free to add my Acked-by and
> resend this to arm@kernel.org. When you do, please keep linux-tegra in
> Cc so that we can track it, and maybe mention that you want this to go
> into v4.7 and how this came about to be, so that the arm-soc maintainers
> won't be surprised when the patch to revert this shows up in a couple of
> days for v4.8.
Alright, I'll prepare it and add a RESEND as well as your Acked-by.
Thank you.
> 
> Can you take care of sending out the second patch as well? Probably best
> to send it the same way as this, with a mention that it's targetted at
> v4.8 and a revert of this one.
Yep, I'll take care of it. I'm tracking this patch since January in any
case :-)

  Ralf
> 
> Thanks,
> Thierry
> 

-- 
Ralf Ramsauer
PGP: 0x8F10049B


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH] ARM: tegra: fix erroneous address in dts

[Ralf Ramsauer]

c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.

This patch is only required for 4.7.x, as there is another patch in the
queue for 4.8 that will remove all '0,' prefixes (b5896f67ab3c in
linux-next).

Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Cc: stable@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
---
Stable maintainers,

this is targetted at v4.7 only, the offending patch was merged in 4.7-rc1.
We tried to get this in via ARM-SoC maintainers, but it was too late for 4.7.

Only 4.7.x is affected, as there is another patch in the queue that will fix this
issue in 4.8.

  Ralf
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 941f362..f4d8125 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1386,7 +1386,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@70006000 {
+	serial@0,70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1398,7 +1398,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@70006040 {
+	serial@0,70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
-- 
2.7.3