* [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-18 12:25 ` gmouse 0 siblings, 0 replies; 22+ messages in thread From: gmouse @ 2021-02-18 12:25 UTC (permalink / raw) To: Avi Fishman, Tomer Maimon, Tali Perry, Patrick Venture, Nancy Yuen, Benjamin Fair, Rob Herring Cc: Anton D. Kachalov, openbmc, devicetree, linux-kernel From: "Anton D. Kachalov" <gmouse@google.com> This change satisfy OpenBMC requirements for flash layout. Signed-off-by: Anton D. Kachalov <gmouse@google.com> --- arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- 1 file changed, 8 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index bd1eb6ee380f..741c1fee8552 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -182,8 +182,8 @@ bbuboot2@80000 { reg = <0x0080000 0x80000>; read-only; }; - envparam@100000 { - label = "env-param"; + ubootenv@100000 { + label = "u-boot-env"; reg = <0x0100000 0x40000>; read-only; }; @@ -195,25 +195,13 @@ kernel@200000 { label = "kernel"; reg = <0x0200000 0x400000>; }; - rootfs@600000 { - label = "rootfs"; - reg = <0x0600000 0x700000>; + rofs@780000 { + label = "rofs"; + reg = <0x0780000 0x1680000>; }; - spare1@D00000 { - label = "spare1"; - reg = <0x0D00000 0x200000>; - }; - spare2@0F00000 { - label = "spare2"; - reg = <0x0F00000 0x200000>; - }; - spare3@1100000 { - label = "spare3"; - reg = <0x1100000 0x200000>; - }; - spare4@1300000 { - label = "spare4"; - reg = <0x1300000 0x0>; + rwfs@1e00000 { + label = "rwfs"; + reg = <0x1e00000 0x200000>; }; }; }; -- 2.30.0.478.g8a0d178c01-goog ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-18 12:25 ` gmouse 0 siblings, 0 replies; 22+ messages in thread From: gmouse @ 2021-02-18 12:25 UTC (permalink / raw) To: Avi Fishman, Tomer Maimon, Tali Perry, Patrick Venture, Nancy Yuen, Benjamin Fair, Rob Herring Cc: devicetree, openbmc, Anton D. Kachalov, linux-kernel From: "Anton D. Kachalov" <gmouse@google.com> This change satisfy OpenBMC requirements for flash layout. Signed-off-by: Anton D. Kachalov <gmouse@google.com> --- arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- 1 file changed, 8 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index bd1eb6ee380f..741c1fee8552 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -182,8 +182,8 @@ bbuboot2@80000 { reg = <0x0080000 0x80000>; read-only; }; - envparam@100000 { - label = "env-param"; + ubootenv@100000 { + label = "u-boot-env"; reg = <0x0100000 0x40000>; read-only; }; @@ -195,25 +195,13 @@ kernel@200000 { label = "kernel"; reg = <0x0200000 0x400000>; }; - rootfs@600000 { - label = "rootfs"; - reg = <0x0600000 0x700000>; + rofs@780000 { + label = "rofs"; + reg = <0x0780000 0x1680000>; }; - spare1@D00000 { - label = "spare1"; - reg = <0x0D00000 0x200000>; - }; - spare2@0F00000 { - label = "spare2"; - reg = <0x0F00000 0x200000>; - }; - spare3@1100000 { - label = "spare3"; - reg = <0x1100000 0x200000>; - }; - spare4@1300000 { - label = "spare4"; - reg = <0x1300000 0x0>; + rwfs@1e00000 { + label = "rwfs"; + reg = <0x1e00000 0x200000>; }; }; }; -- 2.30.0.478.g8a0d178c01-goog ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-18 12:25 ` gmouse (?) @ 2021-02-18 12:47 ` Paul Menzel -1 siblings, 0 replies; 22+ messages in thread From: Paul Menzel @ 2021-02-18 12:47 UTC (permalink / raw) To: Anton D. Kachalov", Avi Fishman, Tomer Maimon, Tali Perry, Patrick Venture, Nancy Yuen, Benjamin Fair, Rob Herring Cc: devicetree, openbmc, linux-kernel Dear Anton, Thank you for your patch. Am 18.02.21 um 13:25 schrieb gmouse@google.com: > From: "Anton D. Kachalov" <gmouse@google.com> > > This change satisfy OpenBMC requirements for flash layout. Can you please list these requirements in the commit message? Maybe, also add OpenBMC to the commit message summary. > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > --- > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- > 1 file changed, 8 insertions(+), 20 deletions(-) […] Kind regards, Paul ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-18 12:25 ` gmouse @ 2021-02-18 17:10 ` Benjamin Fair -1 siblings, 0 replies; 22+ messages in thread From: Benjamin Fair @ 2021-02-18 17:10 UTC (permalink / raw) To: Anton Kachalov Cc: Avi Fishman, Tomer Maimon, Tali Perry, Patrick Venture, Nancy Yuen, Rob Herring, OpenBMC Maillist, devicetree, linux-kernel On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > > From: "Anton D. Kachalov" <gmouse@google.com> > > This change satisfy OpenBMC requirements for flash layout. > > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > --- > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- > 1 file changed, 8 insertions(+), 20 deletions(-) > > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > index bd1eb6ee380f..741c1fee8552 100644 > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > @@ -182,8 +182,8 @@ bbuboot2@80000 { > reg = <0x0080000 0x80000>; > read-only; > }; > - envparam@100000 { > - label = "env-param"; > + ubootenv@100000 { > + label = "u-boot-env"; > reg = <0x0100000 0x40000>; > read-only; > }; > @@ -195,25 +195,13 @@ kernel@200000 { > label = "kernel"; > reg = <0x0200000 0x400000>; > }; > - rootfs@600000 { > - label = "rootfs"; > - reg = <0x0600000 0x700000>; > + rofs@780000 { > + label = "rofs"; > + reg = <0x0780000 0x1680000>; > }; > - spare1@D00000 { > - label = "spare1"; > - reg = <0x0D00000 0x200000>; > - }; > - spare2@0F00000 { > - label = "spare2"; > - reg = <0x0F00000 0x200000>; > - }; > - spare3@1100000 { > - label = "spare3"; > - reg = <0x1100000 0x200000>; > - }; > - spare4@1300000 { > - label = "spare4"; > - reg = <0x1300000 0x0>; > + rwfs@1e00000 { > + label = "rwfs"; > + reg = <0x1e00000 0x200000>; > }; I recommend just including the openbmc-flash-layout.dtsi file here instead since that contains the common flash layout for most OpenBMC systems. > }; > }; > -- > 2.30.0.478.g8a0d178c01-goog > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-18 17:10 ` Benjamin Fair 0 siblings, 0 replies; 22+ messages in thread From: Benjamin Fair @ 2021-02-18 17:10 UTC (permalink / raw) To: Anton Kachalov Cc: devicetree, Tomer Maimon, Avi Fishman, Patrick Venture, OpenBMC Maillist, linux-kernel, Tali Perry, Rob Herring On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > > From: "Anton D. Kachalov" <gmouse@google.com> > > This change satisfy OpenBMC requirements for flash layout. > > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > --- > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- > 1 file changed, 8 insertions(+), 20 deletions(-) > > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > index bd1eb6ee380f..741c1fee8552 100644 > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > @@ -182,8 +182,8 @@ bbuboot2@80000 { > reg = <0x0080000 0x80000>; > read-only; > }; > - envparam@100000 { > - label = "env-param"; > + ubootenv@100000 { > + label = "u-boot-env"; > reg = <0x0100000 0x40000>; > read-only; > }; > @@ -195,25 +195,13 @@ kernel@200000 { > label = "kernel"; > reg = <0x0200000 0x400000>; > }; > - rootfs@600000 { > - label = "rootfs"; > - reg = <0x0600000 0x700000>; > + rofs@780000 { > + label = "rofs"; > + reg = <0x0780000 0x1680000>; > }; > - spare1@D00000 { > - label = "spare1"; > - reg = <0x0D00000 0x200000>; > - }; > - spare2@0F00000 { > - label = "spare2"; > - reg = <0x0F00000 0x200000>; > - }; > - spare3@1100000 { > - label = "spare3"; > - reg = <0x1100000 0x200000>; > - }; > - spare4@1300000 { > - label = "spare4"; > - reg = <0x1300000 0x0>; > + rwfs@1e00000 { > + label = "rwfs"; > + reg = <0x1e00000 0x200000>; > }; I recommend just including the openbmc-flash-layout.dtsi file here instead since that contains the common flash layout for most OpenBMC systems. > }; > }; > -- > 2.30.0.478.g8a0d178c01-goog > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-18 17:10 ` Benjamin Fair (?) @ 2021-02-21 16:53 ` Tomer Maimon 2021-02-22 9:26 ` Anton Kachalov 2021-02-26 20:10 ` Anton Kachalov -1 siblings, 2 replies; 22+ messages in thread From: Tomer Maimon @ 2021-02-21 16:53 UTC (permalink / raw) To: Benjamin Fair Cc: devicetree, Avi Fishman, Patrick Venture, OpenBMC Maillist, Anton Kachalov, Tali Perry, Rob Herring, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 3374 bytes --] Hi Benjamin and Anton, Sorry for the late reply, The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > > > > From: "Anton D. Kachalov" <gmouse@google.com> > > > > This change satisfy OpenBMC requirements for flash layout. > > > > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > > --- > > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- > > 1 file changed, 8 insertions(+), 20 deletions(-) > > > > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > index bd1eb6ee380f..741c1fee8552 100644 > > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > @@ -182,8 +182,8 @@ bbuboot2@80000 { > > reg = <0x0080000 0x80000>; > > read-only; > > }; > > - envparam@100000 { > > - label = "env-param"; > > + ubootenv@100000 { > > + label = "u-boot-env"; > > reg = <0x0100000 0x40000>; > > read-only; > > }; > > @@ -195,25 +195,13 @@ kernel@200000 { > > label = "kernel"; > > reg = <0x0200000 0x400000>; > > }; > > - rootfs@600000 { > > - label = "rootfs"; > > - reg = <0x0600000 0x700000>; > > + rofs@780000 { > > + label = "rofs"; > > + reg = <0x0780000 0x1680000>; > > }; > > - spare1@D00000 { > > - label = "spare1"; > > - reg = <0x0D00000 0x200000>; > > - }; > > - spare2@0F00000 { > > - label = "spare2"; > > - reg = <0x0F00000 0x200000>; > > - }; > > - spare3@1100000 { > > - label = "spare3"; > > - reg = <0x1100000 0x200000>; > > - }; > > - spare4@1300000 { > > - label = "spare4"; > > - reg = <0x1300000 0x0>; > > + rwfs@1e00000 { > > + label = "rwfs"; > > + reg = <0x1e00000 0x200000>; > > }; > > I recommend just including the openbmc-flash-layout.dtsi file here > instead since that contains the common flash layout for most OpenBMC > systems. > > Good solution, Do you mean nuvoton-openbmc-flash-layout? > > }; > > }; > > -- > > 2.30.0.478.g8a0d178c01-goog > > > Thanks, Tomer [-- Attachment #2: Type: text/html, Size: 5642 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-21 16:53 ` Tomer Maimon @ 2021-02-22 9:26 ` Anton Kachalov 2021-02-26 20:10 ` Anton Kachalov 1 sibling, 0 replies; 22+ messages in thread From: Anton Kachalov @ 2021-02-22 9:26 UTC (permalink / raw) To: Tomer Maimon Cc: Benjamin Fair, Avi Fishman, Tali Perry, Patrick Venture, Nancy Yuen, Rob Herring, OpenBMC Maillist, devicetree, Linux Kernel Mailing List Hi, Tom. Yes, I'm using it for testing on real hardware. BTW. Recent u-boot doesn't work with SD cards. The card doesn't detect. The last working version was this one: https://github.com/Nuvoton-Israel/nuvoton-info/tree/master/npcm7xx-poleg/evaluation-board/sw_deliverables/npcm7xx_v2.3 However, u-boot from igps repo: https://github.com/Nuvoton-Israel/igps/tree/master/ImageGeneration/versions Has issues too. It doesn't allow me to read more than 4k bytes once at a time. Thus, to flash the stuff I have manually read chunks from the SD-card: fat load doesn't work at all and I write that data in raw partition. On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > Hi Benjamin and Anton, > > Sorry for the late reply, > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: >> >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: >> > >> > From: "Anton D. Kachalov" <gmouse@google.com> >> > >> > This change satisfy OpenBMC requirements for flash layout. >> > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> >> > --- >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- >> > 1 file changed, 8 insertions(+), 20 deletions(-) >> > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > index bd1eb6ee380f..741c1fee8552 100644 >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { >> > reg = <0x0080000 0x80000>; >> > read-only; >> > }; >> > - envparam@100000 { >> > - label = "env-param"; >> > + ubootenv@100000 { >> > + label = "u-boot-env"; >> > reg = <0x0100000 0x40000>; >> > read-only; >> > }; >> > @@ -195,25 +195,13 @@ kernel@200000 { >> > label = "kernel"; >> > reg = <0x0200000 0x400000>; >> > }; >> > - rootfs@600000 { >> > - label = "rootfs"; >> > - reg = <0x0600000 0x700000>; >> > + rofs@780000 { >> > + label = "rofs"; >> > + reg = <0x0780000 0x1680000>; >> > }; >> > - spare1@D00000 { >> > - label = "spare1"; >> > - reg = <0x0D00000 0x200000>; >> > - }; >> > - spare2@0F00000 { >> > - label = "spare2"; >> > - reg = <0x0F00000 0x200000>; >> > - }; >> > - spare3@1100000 { >> > - label = "spare3"; >> > - reg = <0x1100000 0x200000>; >> > - }; >> > - spare4@1300000 { >> > - label = "spare4"; >> > - reg = <0x1300000 0x0>; >> > + rwfs@1e00000 { >> > + label = "rwfs"; >> > + reg = <0x1e00000 0x200000>; >> > }; >> >> I recommend just including the openbmc-flash-layout.dtsi file here >> instead since that contains the common flash layout for most OpenBMC >> systems. >> > Good solution, > Do you mean nuvoton-openbmc-flash-layout? >> >> > }; >> > }; >> > -- >> > 2.30.0.478.g8a0d178c01-goog >> > > > > Thanks, > > Tomer ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-22 9:26 ` Anton Kachalov 0 siblings, 0 replies; 22+ messages in thread From: Anton Kachalov @ 2021-02-22 9:26 UTC (permalink / raw) To: Tomer Maimon Cc: devicetree, Benjamin Fair, Avi Fishman, Patrick Venture, OpenBMC Maillist, Linux Kernel Mailing List, Tali Perry, Rob Herring Hi, Tom. Yes, I'm using it for testing on real hardware. BTW. Recent u-boot doesn't work with SD cards. The card doesn't detect. The last working version was this one: https://github.com/Nuvoton-Israel/nuvoton-info/tree/master/npcm7xx-poleg/evaluation-board/sw_deliverables/npcm7xx_v2.3 However, u-boot from igps repo: https://github.com/Nuvoton-Israel/igps/tree/master/ImageGeneration/versions Has issues too. It doesn't allow me to read more than 4k bytes once at a time. Thus, to flash the stuff I have manually read chunks from the SD-card: fat load doesn't work at all and I write that data in raw partition. On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > Hi Benjamin and Anton, > > Sorry for the late reply, > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: >> >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: >> > >> > From: "Anton D. Kachalov" <gmouse@google.com> >> > >> > This change satisfy OpenBMC requirements for flash layout. >> > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> >> > --- >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- >> > 1 file changed, 8 insertions(+), 20 deletions(-) >> > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > index bd1eb6ee380f..741c1fee8552 100644 >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { >> > reg = <0x0080000 0x80000>; >> > read-only; >> > }; >> > - envparam@100000 { >> > - label = "env-param"; >> > + ubootenv@100000 { >> > + label = "u-boot-env"; >> > reg = <0x0100000 0x40000>; >> > read-only; >> > }; >> > @@ -195,25 +195,13 @@ kernel@200000 { >> > label = "kernel"; >> > reg = <0x0200000 0x400000>; >> > }; >> > - rootfs@600000 { >> > - label = "rootfs"; >> > - reg = <0x0600000 0x700000>; >> > + rofs@780000 { >> > + label = "rofs"; >> > + reg = <0x0780000 0x1680000>; >> > }; >> > - spare1@D00000 { >> > - label = "spare1"; >> > - reg = <0x0D00000 0x200000>; >> > - }; >> > - spare2@0F00000 { >> > - label = "spare2"; >> > - reg = <0x0F00000 0x200000>; >> > - }; >> > - spare3@1100000 { >> > - label = "spare3"; >> > - reg = <0x1100000 0x200000>; >> > - }; >> > - spare4@1300000 { >> > - label = "spare4"; >> > - reg = <0x1300000 0x0>; >> > + rwfs@1e00000 { >> > + label = "rwfs"; >> > + reg = <0x1e00000 0x200000>; >> > }; >> >> I recommend just including the openbmc-flash-layout.dtsi file here >> instead since that contains the common flash layout for most OpenBMC >> systems. >> > Good solution, > Do you mean nuvoton-openbmc-flash-layout? >> >> > }; >> > }; >> > -- >> > 2.30.0.478.g8a0d178c01-goog >> > > > > Thanks, > > Tomer ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-22 9:26 ` Anton Kachalov @ 2021-02-22 10:21 ` Avi Fishman -1 siblings, 0 replies; 22+ messages in thread From: Avi Fishman @ 2021-02-22 10:21 UTC (permalink / raw) To: Anton Kachalov Cc: Tomer Maimon, Benjamin Fair, Tali Perry, Patrick Venture, Nancy Yuen, Rob Herring, OpenBMC Maillist, devicetree, Linux Kernel Mailing List, ofer.eilon Ofer, Can you check why u-boot doesn't work with SD cards? On Mon, Feb 22, 2021 at 11:27 AM Anton Kachalov <gmouse@google.com> wrote: > > Hi, Tom. > > Yes, I'm using it for testing on real hardware. > > BTW. Recent u-boot doesn't work with SD cards. The card doesn't > detect. The last working version was this one: > > https://github.com/Nuvoton-Israel/nuvoton-info/tree/master/npcm7xx-poleg/evaluation-board/sw_deliverables/npcm7xx_v2.3 > > However, u-boot from igps repo: > > https://github.com/Nuvoton-Israel/igps/tree/master/ImageGeneration/versions > > Has issues too. It doesn't allow me to read more than 4k bytes once at > a time. Thus, to flash the stuff I have manually read chunks from the > SD-card: fat load doesn't work at all and I write that data in raw > partition. > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > Hi Benjamin and Anton, > > > > Sorry for the late reply, > > > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > >> > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > >> > > >> > From: "Anton D. Kachalov" <gmouse@google.com> > >> > > >> > This change satisfy OpenBMC requirements for flash layout. > >> > > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > >> > --- > >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- > >> > 1 file changed, 8 insertions(+), 20 deletions(-) > >> > > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > index bd1eb6ee380f..741c1fee8552 100644 > >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { > >> > reg = <0x0080000 0x80000>; > >> > read-only; > >> > }; > >> > - envparam@100000 { > >> > - label = "env-param"; > >> > + ubootenv@100000 { > >> > + label = "u-boot-env"; > >> > reg = <0x0100000 0x40000>; > >> > read-only; > >> > }; > >> > @@ -195,25 +195,13 @@ kernel@200000 { > >> > label = "kernel"; > >> > reg = <0x0200000 0x400000>; > >> > }; > >> > - rootfs@600000 { > >> > - label = "rootfs"; > >> > - reg = <0x0600000 0x700000>; > >> > + rofs@780000 { > >> > + label = "rofs"; > >> > + reg = <0x0780000 0x1680000>; > >> > }; > >> > - spare1@D00000 { > >> > - label = "spare1"; > >> > - reg = <0x0D00000 0x200000>; > >> > - }; > >> > - spare2@0F00000 { > >> > - label = "spare2"; > >> > - reg = <0x0F00000 0x200000>; > >> > - }; > >> > - spare3@1100000 { > >> > - label = "spare3"; > >> > - reg = <0x1100000 0x200000>; > >> > - }; > >> > - spare4@1300000 { > >> > - label = "spare4"; > >> > - reg = <0x1300000 0x0>; > >> > + rwfs@1e00000 { > >> > + label = "rwfs"; > >> > + reg = <0x1e00000 0x200000>; > >> > }; > >> > >> I recommend just including the openbmc-flash-layout.dtsi file here > >> instead since that contains the common flash layout for most OpenBMC > >> systems. > >> > > Good solution, > > Do you mean nuvoton-openbmc-flash-layout? > >> > >> > }; > >> > }; > >> > -- > >> > 2.30.0.478.g8a0d178c01-goog > >> > > > > > > > Thanks, > > > > Tomer -- Regards, Avi ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-22 10:21 ` Avi Fishman 0 siblings, 0 replies; 22+ messages in thread From: Avi Fishman @ 2021-02-22 10:21 UTC (permalink / raw) To: Anton Kachalov Cc: devicetree, Tomer Maimon, ofer.eilon, Patrick Venture, OpenBMC Maillist, Linux Kernel Mailing List, Tali Perry, Rob Herring, Benjamin Fair Ofer, Can you check why u-boot doesn't work with SD cards? On Mon, Feb 22, 2021 at 11:27 AM Anton Kachalov <gmouse@google.com> wrote: > > Hi, Tom. > > Yes, I'm using it for testing on real hardware. > > BTW. Recent u-boot doesn't work with SD cards. The card doesn't > detect. The last working version was this one: > > https://github.com/Nuvoton-Israel/nuvoton-info/tree/master/npcm7xx-poleg/evaluation-board/sw_deliverables/npcm7xx_v2.3 > > However, u-boot from igps repo: > > https://github.com/Nuvoton-Israel/igps/tree/master/ImageGeneration/versions > > Has issues too. It doesn't allow me to read more than 4k bytes once at > a time. Thus, to flash the stuff I have manually read chunks from the > SD-card: fat load doesn't work at all and I write that data in raw > partition. > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > Hi Benjamin and Anton, > > > > Sorry for the late reply, > > > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > >> > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > >> > > >> > From: "Anton D. Kachalov" <gmouse@google.com> > >> > > >> > This change satisfy OpenBMC requirements for flash layout. > >> > > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > >> > --- > >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- > >> > 1 file changed, 8 insertions(+), 20 deletions(-) > >> > > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > index bd1eb6ee380f..741c1fee8552 100644 > >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { > >> > reg = <0x0080000 0x80000>; > >> > read-only; > >> > }; > >> > - envparam@100000 { > >> > - label = "env-param"; > >> > + ubootenv@100000 { > >> > + label = "u-boot-env"; > >> > reg = <0x0100000 0x40000>; > >> > read-only; > >> > }; > >> > @@ -195,25 +195,13 @@ kernel@200000 { > >> > label = "kernel"; > >> > reg = <0x0200000 0x400000>; > >> > }; > >> > - rootfs@600000 { > >> > - label = "rootfs"; > >> > - reg = <0x0600000 0x700000>; > >> > + rofs@780000 { > >> > + label = "rofs"; > >> > + reg = <0x0780000 0x1680000>; > >> > }; > >> > - spare1@D00000 { > >> > - label = "spare1"; > >> > - reg = <0x0D00000 0x200000>; > >> > - }; > >> > - spare2@0F00000 { > >> > - label = "spare2"; > >> > - reg = <0x0F00000 0x200000>; > >> > - }; > >> > - spare3@1100000 { > >> > - label = "spare3"; > >> > - reg = <0x1100000 0x200000>; > >> > - }; > >> > - spare4@1300000 { > >> > - label = "spare4"; > >> > - reg = <0x1300000 0x0>; > >> > + rwfs@1e00000 { > >> > + label = "rwfs"; > >> > + reg = <0x1e00000 0x200000>; > >> > }; > >> > >> I recommend just including the openbmc-flash-layout.dtsi file here > >> instead since that contains the common flash layout for most OpenBMC > >> systems. > >> > > Good solution, > > Do you mean nuvoton-openbmc-flash-layout? > >> > >> > }; > >> > }; > >> > -- > >> > 2.30.0.478.g8a0d178c01-goog > >> > > > > > > > Thanks, > > > > Tomer -- Regards, Avi ^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-22 10:21 ` Avi Fishman @ 2021-02-22 14:10 ` IS20 Ofer Eilon -1 siblings, 0 replies; 22+ messages in thread From: IS20 Ofer Eilon @ 2021-02-22 14:10 UTC (permalink / raw) To: Avi Fishman, Anton Kachalov Cc: Tomer Maimon, Benjamin Fair, Tali Perry, Patrick Venture, Nancy Yuen, Rob Herring, OpenBMC Maillist, devicetree, Linux Kernel Mailing List Hi Avi, It seems an old version of uboot u-boot_2019.01.7.5.bin from igps below: > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fversions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0XumchRrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 Please use latest from uboot.bin github. Regards, Ofer -----Original Message----- From: Avi Fishman <avifishman70@gmail.com> Sent: Monday, February 22, 2021 12:21 PM To: Anton Kachalov <gmouse@google.com> Cc: Tomer Maimon <tmaimon77@gmail.com>; Benjamin Fair <benjaminfair@google.com>; Tali Perry <tali.perry1@gmail.com>; Patrick Venture <venture@google.com>; Nancy Yuen <yuenn@google.com>; Rob Herring <robh+dt@kernel.org>; OpenBMC Maillist <openbmc@lists.ozlabs.org>; devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; IS20 Ofer Eilon <ofer.eilon@nuvoton.com> Subject: Re: [PATCH] ARM: dts: nuvoton: Fix flash layout Ofer, Can you check why u-boot doesn't work with SD cards? On Mon, Feb 22, 2021 at 11:27 AM Anton Kachalov <gmouse@google.com> wrote: > > Hi, Tom. > > Yes, I'm using it for testing on real hardware. > > BTW. Recent u-boot doesn't work with SD cards. The card doesn't > detect. The last working version was this one: > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > ub.com%2FNuvoton-Israel%2Fnuvoton-info%2Ftree%2Fmaster%2Fnpcm7xx-poleg > %2Fevaluation-board%2Fsw_deliverables%2Fnpcm7xx_v2.3&data=04%7C01% > 7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f249 > 31d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTW > FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6 > Mn0%3D%7C1000&sdata=f4t41g3CQaFTQNfwwNVBrIwQScndIGcfRTms0yrTn5o%3D > &reserved=0 > > However, u-boot from igps repo: > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > ub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fver > sions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee > 4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C6374958611 > 62860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0Xumch > RrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > Has issues too. It doesn't allow me to read more than 4k bytes once at > a time. Thus, to flash the stuff I have manually read chunks from the > SD-card: fat load doesn't work at all and I write that data in raw > partition. > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > Hi Benjamin and Anton, > > > > Sorry for the late reply, > > > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > >> > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > >> > > >> > From: "Anton D. Kachalov" <gmouse@google.com> > >> > > >> > This change satisfy OpenBMC requirements for flash layout. > >> > > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > >> > --- > >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 > >> > +++++++---------------- > >> > 1 file changed, 8 insertions(+), 20 deletions(-) > >> > > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > index bd1eb6ee380f..741c1fee8552 100644 > >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { > >> > reg = <0x0080000 0x80000>; > >> > read-only; > >> > }; > >> > - envparam@100000 { > >> > - label = "env-param"; > >> > + ubootenv@100000 { > >> > + label = "u-boot-env"; > >> > reg = <0x0100000 0x40000>; > >> > read-only; > >> > }; @@ -195,25 +195,13 @@ > >> > kernel@200000 { > >> > label = "kernel"; > >> > reg = <0x0200000 0x400000>; > >> > }; > >> > - rootfs@600000 { > >> > - label = "rootfs"; > >> > - reg = <0x0600000 0x700000>; > >> > + rofs@780000 { > >> > + label = "rofs"; > >> > + reg = <0x0780000 0x1680000>; > >> > }; > >> > - spare1@D00000 { > >> > - label = "spare1"; > >> > - reg = <0x0D00000 0x200000>; > >> > - }; > >> > - spare2@0F00000 { > >> > - label = "spare2"; > >> > - reg = <0x0F00000 0x200000>; > >> > - }; > >> > - spare3@1100000 { > >> > - label = "spare3"; > >> > - reg = <0x1100000 0x200000>; > >> > - }; > >> > - spare4@1300000 { > >> > - label = "spare4"; > >> > - reg = <0x1300000 0x0>; > >> > + rwfs@1e00000 { > >> > + label = "rwfs"; > >> > + reg = <0x1e00000 0x200000>; > >> > }; > >> > >> I recommend just including the openbmc-flash-layout.dtsi file here > >> instead since that contains the common flash layout for most > >> OpenBMC systems. > >> > > Good solution, > > Do you mean nuvoton-openbmc-flash-layout? > >> > >> > }; > >> > }; > >> > -- > >> > 2.30.0.478.g8a0d178c01-goog > >> > > > > > > > Thanks, > > > > Tomer -- Regards, Avi ________________________________ ________________________________ The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton. ^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-22 14:10 ` IS20 Ofer Eilon 0 siblings, 0 replies; 22+ messages in thread From: IS20 Ofer Eilon @ 2021-02-22 14:10 UTC (permalink / raw) To: Avi Fishman, Anton Kachalov Cc: devicetree, Tomer Maimon, Patrick Venture, OpenBMC Maillist, Linux Kernel Mailing List, Tali Perry, Rob Herring, Benjamin Fair Hi Avi, It seems an old version of uboot u-boot_2019.01.7.5.bin from igps below: > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fversions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0XumchRrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 Please use latest from uboot.bin github. Regards, Ofer -----Original Message----- From: Avi Fishman <avifishman70@gmail.com> Sent: Monday, February 22, 2021 12:21 PM To: Anton Kachalov <gmouse@google.com> Cc: Tomer Maimon <tmaimon77@gmail.com>; Benjamin Fair <benjaminfair@google.com>; Tali Perry <tali.perry1@gmail.com>; Patrick Venture <venture@google.com>; Nancy Yuen <yuenn@google.com>; Rob Herring <robh+dt@kernel.org>; OpenBMC Maillist <openbmc@lists.ozlabs.org>; devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; IS20 Ofer Eilon <ofer.eilon@nuvoton.com> Subject: Re: [PATCH] ARM: dts: nuvoton: Fix flash layout Ofer, Can you check why u-boot doesn't work with SD cards? On Mon, Feb 22, 2021 at 11:27 AM Anton Kachalov <gmouse@google.com> wrote: > > Hi, Tom. > > Yes, I'm using it for testing on real hardware. > > BTW. Recent u-boot doesn't work with SD cards. The card doesn't > detect. The last working version was this one: > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > ub.com%2FNuvoton-Israel%2Fnuvoton-info%2Ftree%2Fmaster%2Fnpcm7xx-poleg > %2Fevaluation-board%2Fsw_deliverables%2Fnpcm7xx_v2.3&data=04%7C01% > 7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f249 > 31d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTW > FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6 > Mn0%3D%7C1000&sdata=f4t41g3CQaFTQNfwwNVBrIwQScndIGcfRTms0yrTn5o%3D > &reserved=0 > > However, u-boot from igps repo: > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > ub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fver > sions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee > 4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C6374958611 > 62860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0Xumch > RrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > Has issues too. It doesn't allow me to read more than 4k bytes once at > a time. Thus, to flash the stuff I have manually read chunks from the > SD-card: fat load doesn't work at all and I write that data in raw > partition. > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > Hi Benjamin and Anton, > > > > Sorry for the late reply, > > > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > >> > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > >> > > >> > From: "Anton D. Kachalov" <gmouse@google.com> > >> > > >> > This change satisfy OpenBMC requirements for flash layout. > >> > > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > >> > --- > >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 > >> > +++++++---------------- > >> > 1 file changed, 8 insertions(+), 20 deletions(-) > >> > > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > index bd1eb6ee380f..741c1fee8552 100644 > >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { > >> > reg = <0x0080000 0x80000>; > >> > read-only; > >> > }; > >> > - envparam@100000 { > >> > - label = "env-param"; > >> > + ubootenv@100000 { > >> > + label = "u-boot-env"; > >> > reg = <0x0100000 0x40000>; > >> > read-only; > >> > }; @@ -195,25 +195,13 @@ > >> > kernel@200000 { > >> > label = "kernel"; > >> > reg = <0x0200000 0x400000>; > >> > }; > >> > - rootfs@600000 { > >> > - label = "rootfs"; > >> > - reg = <0x0600000 0x700000>; > >> > + rofs@780000 { > >> > + label = "rofs"; > >> > + reg = <0x0780000 0x1680000>; > >> > }; > >> > - spare1@D00000 { > >> > - label = "spare1"; > >> > - reg = <0x0D00000 0x200000>; > >> > - }; > >> > - spare2@0F00000 { > >> > - label = "spare2"; > >> > - reg = <0x0F00000 0x200000>; > >> > - }; > >> > - spare3@1100000 { > >> > - label = "spare3"; > >> > - reg = <0x1100000 0x200000>; > >> > - }; > >> > - spare4@1300000 { > >> > - label = "spare4"; > >> > - reg = <0x1300000 0x0>; > >> > + rwfs@1e00000 { > >> > + label = "rwfs"; > >> > + reg = <0x1e00000 0x200000>; > >> > }; > >> > >> I recommend just including the openbmc-flash-layout.dtsi file here > >> instead since that contains the common flash layout for most > >> OpenBMC systems. > >> > > Good solution, > > Do you mean nuvoton-openbmc-flash-layout? > >> > >> > }; > >> > }; > >> > -- > >> > 2.30.0.478.g8a0d178c01-goog > >> > > > > > > > Thanks, > > > > Tomer -- Regards, Avi ________________________________ ________________________________ The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-22 14:10 ` IS20 Ofer Eilon @ 2021-02-22 14:24 ` Anton Kachalov -1 siblings, 0 replies; 22+ messages in thread From: Anton Kachalov @ 2021-02-22 14:24 UTC (permalink / raw) To: IS20 Ofer Eilon Cc: Avi Fishman, Tomer Maimon, Benjamin Fair, Tali Perry, Patrick Venture, Nancy Yuen, Rob Herring, OpenBMC Maillist, devicetree, Linux Kernel Mailing List Ofer, The oldest version from igps doesn't work as well as the latest version from u-boot github. The only version that works for me is in software deliverables: https://github.com/Nuvoton-Israel/nuvoton-info/tree/master/npcm7xx-poleg/evaluation-board/sw_deliverables/npcm7xx_v2.3 On Mon, 22 Feb 2021 at 15:10, IS20 Ofer Eilon <ofer.eilon@nuvoton.com> wrote: > > Hi Avi, > > It seems an old version of uboot u-boot_2019.01.7.5.bin from igps below: > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fversions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0XumchRrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > Please use latest from uboot.bin github. > > Regards, > Ofer > > > -----Original Message----- > From: Avi Fishman <avifishman70@gmail.com> > Sent: Monday, February 22, 2021 12:21 PM > To: Anton Kachalov <gmouse@google.com> > Cc: Tomer Maimon <tmaimon77@gmail.com>; Benjamin Fair <benjaminfair@google.com>; Tali Perry <tali.perry1@gmail.com>; Patrick Venture <venture@google.com>; Nancy Yuen <yuenn@google.com>; Rob Herring <robh+dt@kernel.org>; OpenBMC Maillist <openbmc@lists.ozlabs.org>; devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; IS20 Ofer Eilon <ofer.eilon@nuvoton.com> > Subject: Re: [PATCH] ARM: dts: nuvoton: Fix flash layout > > Ofer, > > Can you check why u-boot doesn't work with SD cards? > > On Mon, Feb 22, 2021 at 11:27 AM Anton Kachalov <gmouse@google.com> wrote: > > > > Hi, Tom. > > > > Yes, I'm using it for testing on real hardware. > > > > BTW. Recent u-boot doesn't work with SD cards. The card doesn't > > detect. The last working version was this one: > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > ub.com%2FNuvoton-Israel%2Fnuvoton-info%2Ftree%2Fmaster%2Fnpcm7xx-poleg > > %2Fevaluation-board%2Fsw_deliverables%2Fnpcm7xx_v2.3&data=04%7C01% > > 7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f249 > > 31d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTW > > FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6 > > Mn0%3D%7C1000&sdata=f4t41g3CQaFTQNfwwNVBrIwQScndIGcfRTms0yrTn5o%3D > > &reserved=0 > > > > However, u-boot from igps repo: > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > ub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fver > > sions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee > > 4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C6374958611 > > 62860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL > > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0Xumch > > RrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > > > Has issues too. It doesn't allow me to read more than 4k bytes once at > > a time. Thus, to flash the stuff I have manually read chunks from the > > SD-card: fat load doesn't work at all and I write that data in raw > > partition. > > > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > > > Hi Benjamin and Anton, > > > > > > Sorry for the late reply, > > > > > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > > > > > > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > > > > > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > > >> > > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > > >> > > > >> > From: "Anton D. Kachalov" <gmouse@google.com> > > >> > > > >> > This change satisfy OpenBMC requirements for flash layout. > > >> > > > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > > >> > --- > > >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 > > >> > +++++++---------------- > > >> > 1 file changed, 8 insertions(+), 20 deletions(-) > > >> > > > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > >> > b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > >> > index bd1eb6ee380f..741c1fee8552 100644 > > >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { > > >> > reg = <0x0080000 0x80000>; > > >> > read-only; > > >> > }; > > >> > - envparam@100000 { > > >> > - label = "env-param"; > > >> > + ubootenv@100000 { > > >> > + label = "u-boot-env"; > > >> > reg = <0x0100000 0x40000>; > > >> > read-only; > > >> > }; @@ -195,25 +195,13 @@ > > >> > kernel@200000 { > > >> > label = "kernel"; > > >> > reg = <0x0200000 0x400000>; > > >> > }; > > >> > - rootfs@600000 { > > >> > - label = "rootfs"; > > >> > - reg = <0x0600000 0x700000>; > > >> > + rofs@780000 { > > >> > + label = "rofs"; > > >> > + reg = <0x0780000 0x1680000>; > > >> > }; > > >> > - spare1@D00000 { > > >> > - label = "spare1"; > > >> > - reg = <0x0D00000 0x200000>; > > >> > - }; > > >> > - spare2@0F00000 { > > >> > - label = "spare2"; > > >> > - reg = <0x0F00000 0x200000>; > > >> > - }; > > >> > - spare3@1100000 { > > >> > - label = "spare3"; > > >> > - reg = <0x1100000 0x200000>; > > >> > - }; > > >> > - spare4@1300000 { > > >> > - label = "spare4"; > > >> > - reg = <0x1300000 0x0>; > > >> > + rwfs@1e00000 { > > >> > + label = "rwfs"; > > >> > + reg = <0x1e00000 0x200000>; > > >> > }; > > >> > > >> I recommend just including the openbmc-flash-layout.dtsi file here > > >> instead since that contains the common flash layout for most > > >> OpenBMC systems. > > >> > > > Good solution, > > > Do you mean nuvoton-openbmc-flash-layout? > > >> > > >> > }; > > >> > }; > > >> > -- > > >> > 2.30.0.478.g8a0d178c01-goog > > >> > > > > > > > > > > Thanks, > > > > > > Tomer > > > > -- > Regards, > Avi > ________________________________ > ________________________________ > The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-22 14:24 ` Anton Kachalov 0 siblings, 0 replies; 22+ messages in thread From: Anton Kachalov @ 2021-02-22 14:24 UTC (permalink / raw) To: IS20 Ofer Eilon Cc: devicetree, Tomer Maimon, Avi Fishman, Patrick Venture, OpenBMC Maillist, Linux Kernel Mailing List, Tali Perry, Rob Herring, Benjamin Fair Ofer, The oldest version from igps doesn't work as well as the latest version from u-boot github. The only version that works for me is in software deliverables: https://github.com/Nuvoton-Israel/nuvoton-info/tree/master/npcm7xx-poleg/evaluation-board/sw_deliverables/npcm7xx_v2.3 On Mon, 22 Feb 2021 at 15:10, IS20 Ofer Eilon <ofer.eilon@nuvoton.com> wrote: > > Hi Avi, > > It seems an old version of uboot u-boot_2019.01.7.5.bin from igps below: > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fversions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0XumchRrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > Please use latest from uboot.bin github. > > Regards, > Ofer > > > -----Original Message----- > From: Avi Fishman <avifishman70@gmail.com> > Sent: Monday, February 22, 2021 12:21 PM > To: Anton Kachalov <gmouse@google.com> > Cc: Tomer Maimon <tmaimon77@gmail.com>; Benjamin Fair <benjaminfair@google.com>; Tali Perry <tali.perry1@gmail.com>; Patrick Venture <venture@google.com>; Nancy Yuen <yuenn@google.com>; Rob Herring <robh+dt@kernel.org>; OpenBMC Maillist <openbmc@lists.ozlabs.org>; devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; IS20 Ofer Eilon <ofer.eilon@nuvoton.com> > Subject: Re: [PATCH] ARM: dts: nuvoton: Fix flash layout > > Ofer, > > Can you check why u-boot doesn't work with SD cards? > > On Mon, Feb 22, 2021 at 11:27 AM Anton Kachalov <gmouse@google.com> wrote: > > > > Hi, Tom. > > > > Yes, I'm using it for testing on real hardware. > > > > BTW. Recent u-boot doesn't work with SD cards. The card doesn't > > detect. The last working version was this one: > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > ub.com%2FNuvoton-Israel%2Fnuvoton-info%2Ftree%2Fmaster%2Fnpcm7xx-poleg > > %2Fevaluation-board%2Fsw_deliverables%2Fnpcm7xx_v2.3&data=04%7C01% > > 7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f249 > > 31d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTW > > FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6 > > Mn0%3D%7C1000&sdata=f4t41g3CQaFTQNfwwNVBrIwQScndIGcfRTms0yrTn5o%3D > > &reserved=0 > > > > However, u-boot from igps repo: > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > ub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fver > > sions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee > > 4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C6374958611 > > 62860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL > > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0Xumch > > RrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > > > Has issues too. It doesn't allow me to read more than 4k bytes once at > > a time. Thus, to flash the stuff I have manually read chunks from the > > SD-card: fat load doesn't work at all and I write that data in raw > > partition. > > > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > > > Hi Benjamin and Anton, > > > > > > Sorry for the late reply, > > > > > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > > > > > > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > > > > > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > > >> > > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > > >> > > > >> > From: "Anton D. Kachalov" <gmouse@google.com> > > >> > > > >> > This change satisfy OpenBMC requirements for flash layout. > > >> > > > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > > >> > --- > > >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 > > >> > +++++++---------------- > > >> > 1 file changed, 8 insertions(+), 20 deletions(-) > > >> > > > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > >> > b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > >> > index bd1eb6ee380f..741c1fee8552 100644 > > >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { > > >> > reg = <0x0080000 0x80000>; > > >> > read-only; > > >> > }; > > >> > - envparam@100000 { > > >> > - label = "env-param"; > > >> > + ubootenv@100000 { > > >> > + label = "u-boot-env"; > > >> > reg = <0x0100000 0x40000>; > > >> > read-only; > > >> > }; @@ -195,25 +195,13 @@ > > >> > kernel@200000 { > > >> > label = "kernel"; > > >> > reg = <0x0200000 0x400000>; > > >> > }; > > >> > - rootfs@600000 { > > >> > - label = "rootfs"; > > >> > - reg = <0x0600000 0x700000>; > > >> > + rofs@780000 { > > >> > + label = "rofs"; > > >> > + reg = <0x0780000 0x1680000>; > > >> > }; > > >> > - spare1@D00000 { > > >> > - label = "spare1"; > > >> > - reg = <0x0D00000 0x200000>; > > >> > - }; > > >> > - spare2@0F00000 { > > >> > - label = "spare2"; > > >> > - reg = <0x0F00000 0x200000>; > > >> > - }; > > >> > - spare3@1100000 { > > >> > - label = "spare3"; > > >> > - reg = <0x1100000 0x200000>; > > >> > - }; > > >> > - spare4@1300000 { > > >> > - label = "spare4"; > > >> > - reg = <0x1300000 0x0>; > > >> > + rwfs@1e00000 { > > >> > + label = "rwfs"; > > >> > + reg = <0x1e00000 0x200000>; > > >> > }; > > >> > > >> I recommend just including the openbmc-flash-layout.dtsi file here > > >> instead since that contains the common flash layout for most > > >> OpenBMC systems. > > >> > > > Good solution, > > > Do you mean nuvoton-openbmc-flash-layout? > > >> > > >> > }; > > >> > }; > > >> > -- > > >> > 2.30.0.478.g8a0d178c01-goog > > >> > > > > > > > > > > Thanks, > > > > > > Tomer > > > > -- > Regards, > Avi > ________________________________ > ________________________________ > The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-22 14:24 ` Anton Kachalov @ 2021-02-23 13:14 ` Avi Fishman -1 siblings, 0 replies; 22+ messages in thread From: Avi Fishman @ 2021-02-23 13:14 UTC (permalink / raw) To: Anton Kachalov Cc: IS20 Ofer Eilon, Tomer Maimon, Benjamin Fair, Tali Perry, Patrick Venture, Nancy Yuen, Rob Herring, OpenBMC Maillist, devicetree, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 9045 bytes --] Hi Anton, At runtime do you get into the code inside npcmx50_sdhci.c, but it doesn't work well or not access at all? Can you check those registers (BootBlock should set them for you): sd1irv1 at address 0xf0800054 value = 0xf5c80f80 sd1irv2 at address 0xf0800058 value = 0x52001132 sd2irv1 at address 0xf08000b4 value = 0xfdc80f80 sd2irv2 at address 0xf08000b8 value = 0x52003132 Also try to use attached file. Thanks, Avi On Mon, Feb 22, 2021 at 4:25 PM Anton Kachalov <gmouse@google.com> wrote: > > Ofer, > > The oldest version from igps doesn't work as well as the latest > version from u-boot github. > > The only version that works for me is in software deliverables: > > https://github.com/Nuvoton-Israel/nuvoton-info/tree/master/npcm7xx-poleg/evaluation-board/sw_deliverables/npcm7xx_v2.3 > > On Mon, 22 Feb 2021 at 15:10, IS20 Ofer Eilon <ofer.eilon@nuvoton.com> wrote: > > > > Hi Avi, > > > > It seems an old version of uboot u-boot_2019.01.7.5.bin from igps below: > > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fversions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0XumchRrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > > > Please use latest from uboot.bin github. > > > > Regards, > > Ofer > > > > > > -----Original Message----- > > From: Avi Fishman <avifishman70@gmail.com> > > Sent: Monday, February 22, 2021 12:21 PM > > To: Anton Kachalov <gmouse@google.com> > > Cc: Tomer Maimon <tmaimon77@gmail.com>; Benjamin Fair <benjaminfair@google.com>; Tali Perry <tali.perry1@gmail.com>; Patrick Venture <venture@google.com>; Nancy Yuen <yuenn@google.com>; Rob Herring <robh+dt@kernel.org>; OpenBMC Maillist <openbmc@lists.ozlabs.org>; devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; IS20 Ofer Eilon <ofer.eilon@nuvoton.com> > > Subject: Re: [PATCH] ARM: dts: nuvoton: Fix flash layout > > > > Ofer, > > > > Can you check why u-boot doesn't work with SD cards? > > > > On Mon, Feb 22, 2021 at 11:27 AM Anton Kachalov <gmouse@google.com> wrote: > > > > > > Hi, Tom. > > > > > > Yes, I'm using it for testing on real hardware. > > > > > > BTW. Recent u-boot doesn't work with SD cards. The card doesn't > > > detect. The last working version was this one: > > > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > > ub.com%2FNuvoton-Israel%2Fnuvoton-info%2Ftree%2Fmaster%2Fnpcm7xx-poleg > > > %2Fevaluation-board%2Fsw_deliverables%2Fnpcm7xx_v2.3&data=04%7C01% > > > 7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f249 > > > 31d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTW > > > FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6 > > > Mn0%3D%7C1000&sdata=f4t41g3CQaFTQNfwwNVBrIwQScndIGcfRTms0yrTn5o%3D > > > &reserved=0 > > > > > > However, u-boot from igps repo: > > > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > > ub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fver > > > sions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee > > > 4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C6374958611 > > > 62860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL > > > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0Xumch > > > RrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > > > > > Has issues too. It doesn't allow me to read more than 4k bytes once at > > > a time. Thus, to flash the stuff I have manually read chunks from the > > > SD-card: fat load doesn't work at all and I write that data in raw > > > partition. > > > > > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > > > > > Hi Benjamin and Anton, > > > > > > > > Sorry for the late reply, > > > > > > > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > > > > > > > > > > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > > > > > > > > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > > > >> > > > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > > > >> > > > > >> > From: "Anton D. Kachalov" <gmouse@google.com> > > > >> > > > > >> > This change satisfy OpenBMC requirements for flash layout. > > > >> > > > > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > > > >> > --- > > > >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 > > > >> > +++++++---------------- > > > >> > 1 file changed, 8 insertions(+), 20 deletions(-) > > > >> > > > > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > > >> > b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > > >> > index bd1eb6ee380f..741c1fee8552 100644 > > > >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > > >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > > >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { > > > >> > reg = <0x0080000 0x80000>; > > > >> > read-only; > > > >> > }; > > > >> > - envparam@100000 { > > > >> > - label = "env-param"; > > > >> > + ubootenv@100000 { > > > >> > + label = "u-boot-env"; > > > >> > reg = <0x0100000 0x40000>; > > > >> > read-only; > > > >> > }; @@ -195,25 +195,13 @@ > > > >> > kernel@200000 { > > > >> > label = "kernel"; > > > >> > reg = <0x0200000 0x400000>; > > > >> > }; > > > >> > - rootfs@600000 { > > > >> > - label = "rootfs"; > > > >> > - reg = <0x0600000 0x700000>; > > > >> > + rofs@780000 { > > > >> > + label = "rofs"; > > > >> > + reg = <0x0780000 0x1680000>; > > > >> > }; > > > >> > - spare1@D00000 { > > > >> > - label = "spare1"; > > > >> > - reg = <0x0D00000 0x200000>; > > > >> > - }; > > > >> > - spare2@0F00000 { > > > >> > - label = "spare2"; > > > >> > - reg = <0x0F00000 0x200000>; > > > >> > - }; > > > >> > - spare3@1100000 { > > > >> > - label = "spare3"; > > > >> > - reg = <0x1100000 0x200000>; > > > >> > - }; > > > >> > - spare4@1300000 { > > > >> > - label = "spare4"; > > > >> > - reg = <0x1300000 0x0>; > > > >> > + rwfs@1e00000 { > > > >> > + label = "rwfs"; > > > >> > + reg = <0x1e00000 0x200000>; > > > >> > }; > > > >> > > > >> I recommend just including the openbmc-flash-layout.dtsi file here > > > >> instead since that contains the common flash layout for most > > > >> OpenBMC systems. > > > >> > > > > Good solution, > > > > Do you mean nuvoton-openbmc-flash-layout? > > > >> > > > >> > }; > > > >> > }; > > > >> > -- > > > >> > 2.30.0.478.g8a0d178c01-goog > > > >> > > > > > > > > > > > > > Thanks, > > > > > > > > Tomer > > > > > > > > -- > > Regards, > > Avi > > ________________________________ > > ________________________________ > > The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton. -- Regards, Avi [-- Attachment #2: npcmx50_sdhci.c --] [-- Type: application/octet-stream, Size: 3705 bytes --] /* *copyright (c) 2017 Nuvoton Technology Corp. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <dm.h> #include <sdhci.h> #include <clk.h> #include <asm/arch/cpu.h> #include <asm/arch/gcr.h> #include <asm/arch/clock.h> #define NPCMX50_SD 0 #define NPCMX50_EMMC 1 #ifdef CONFIG_DM_MMC struct npcmx50_sdhci_plat { struct mmc_config cfg; struct mmc mmc; }; DECLARE_GLOBAL_DATA_PTR; #endif #ifdef CONFIG_DM_MMC static int npcmx50_sdhci_probe(struct udevice *dev) { struct npcmx50_sdhci_plat *plat = dev_get_platdata(dev); struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct sdhci_host *host = dev_get_priv(dev); int ret; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; if (host->index == NPCMX50_SD) { unsigned int status; sdhci_writeb(host, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST, SDHCI_HOST_CONTROL); status = sdhci_readl(host, SDHCI_PRESENT_STATE); while ((!(status & SDHCI_CARD_PRESENT)) || (!(status & SDHCI_CARD_STATE_STABLE)) || (!(status & SDHCI_CARD_DETECT_PIN_LEVEL))) status = sdhci_readl(host, SDHCI_PRESENT_STATE); } host->version = sdhci_readw(host, SDHCI_HOST_VERSION); if (host->bus_width == 4) host->host_caps |= MMC_MODE_4BIT; if (host->bus_width == 8) host->host_caps |= MMC_MODE_8BIT; ret = sdhci_setup_cfg(&plat->cfg, host, host->clock, 400000); if (ret) return ret; host->mmc = &plat->mmc; host->mmc->priv = host; host->mmc->dev = dev; upriv->mmc = host->mmc; host->clock = 0; return sdhci_probe(dev); } static int npcmx50_ofdata_to_platdata(struct udevice *dev) { struct sdhci_host *host = dev_get_priv(dev); host->name = strdup(dev->name); host->ioaddr = (void *)dev_read_addr(dev); host->bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "bus-width", 4); host->index = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "index", 0); host->clock = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "clock-frequency", 400000); if (host->ioaddr == (void *)FDT_ADDR_T_NONE) return -EINVAL; return 0; } static int npcmx50_sdhci_bind(struct udevice *dev) { struct npcmx50_sdhci_plat *plat = dev_get_platdata(dev); return sdhci_bind(dev, &plat->mmc, &plat->cfg); } static int npcmx50_sdhci_remove(struct udevice *dev) { return 0; } static const struct udevice_id npcmx50_mmc_ids[] = { { .compatible = "nuvoton,npcmx50-sdhci-SD" }, { .compatible = "nuvoton,npcmx50-sdhci-eMMC"}, { } }; U_BOOT_DRIVER(npcmx50_sdc_drv) = { .name = "npcmx50_sdhci", .id = UCLASS_MMC, .of_match = npcmx50_mmc_ids, .ofdata_to_platdata = npcmx50_ofdata_to_platdata, .ops = &sdhci_ops, .bind = npcmx50_sdhci_bind, .probe = npcmx50_sdhci_probe, .remove = npcmx50_sdhci_remove, .priv_auto_alloc_size = sizeof(struct sdhci_host), .platdata_auto_alloc_size = sizeof(struct npcmx50_sdhci_plat), }; #endif ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-23 13:14 ` Avi Fishman 0 siblings, 0 replies; 22+ messages in thread From: Avi Fishman @ 2021-02-23 13:14 UTC (permalink / raw) To: Anton Kachalov Cc: devicetree, Benjamin Fair, IS20 Ofer Eilon, Patrick Venture, OpenBMC Maillist, Linux Kernel Mailing List, Tali Perry, Rob Herring, Tomer Maimon [-- Attachment #1: Type: text/plain, Size: 9045 bytes --] Hi Anton, At runtime do you get into the code inside npcmx50_sdhci.c, but it doesn't work well or not access at all? Can you check those registers (BootBlock should set them for you): sd1irv1 at address 0xf0800054 value = 0xf5c80f80 sd1irv2 at address 0xf0800058 value = 0x52001132 sd2irv1 at address 0xf08000b4 value = 0xfdc80f80 sd2irv2 at address 0xf08000b8 value = 0x52003132 Also try to use attached file. Thanks, Avi On Mon, Feb 22, 2021 at 4:25 PM Anton Kachalov <gmouse@google.com> wrote: > > Ofer, > > The oldest version from igps doesn't work as well as the latest > version from u-boot github. > > The only version that works for me is in software deliverables: > > https://github.com/Nuvoton-Israel/nuvoton-info/tree/master/npcm7xx-poleg/evaluation-board/sw_deliverables/npcm7xx_v2.3 > > On Mon, 22 Feb 2021 at 15:10, IS20 Ofer Eilon <ofer.eilon@nuvoton.com> wrote: > > > > Hi Avi, > > > > It seems an old version of uboot u-boot_2019.01.7.5.bin from igps below: > > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fversions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0XumchRrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > > > Please use latest from uboot.bin github. > > > > Regards, > > Ofer > > > > > > -----Original Message----- > > From: Avi Fishman <avifishman70@gmail.com> > > Sent: Monday, February 22, 2021 12:21 PM > > To: Anton Kachalov <gmouse@google.com> > > Cc: Tomer Maimon <tmaimon77@gmail.com>; Benjamin Fair <benjaminfair@google.com>; Tali Perry <tali.perry1@gmail.com>; Patrick Venture <venture@google.com>; Nancy Yuen <yuenn@google.com>; Rob Herring <robh+dt@kernel.org>; OpenBMC Maillist <openbmc@lists.ozlabs.org>; devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; IS20 Ofer Eilon <ofer.eilon@nuvoton.com> > > Subject: Re: [PATCH] ARM: dts: nuvoton: Fix flash layout > > > > Ofer, > > > > Can you check why u-boot doesn't work with SD cards? > > > > On Mon, Feb 22, 2021 at 11:27 AM Anton Kachalov <gmouse@google.com> wrote: > > > > > > Hi, Tom. > > > > > > Yes, I'm using it for testing on real hardware. > > > > > > BTW. Recent u-boot doesn't work with SD cards. The card doesn't > > > detect. The last working version was this one: > > > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > > ub.com%2FNuvoton-Israel%2Fnuvoton-info%2Ftree%2Fmaster%2Fnpcm7xx-poleg > > > %2Fevaluation-board%2Fsw_deliverables%2Fnpcm7xx_v2.3&data=04%7C01% > > > 7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee4c08d8d71bacd4%7Ca3f249 > > > 31d4034b4a94f17d83ac638e07%7C0%7C0%7C637495861162860437%7CUnknown%7CTW > > > FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6 > > > Mn0%3D%7C1000&sdata=f4t41g3CQaFTQNfwwNVBrIwQScndIGcfRTms0yrTn5o%3D > > > &reserved=0 > > > > > > However, u-boot from igps repo: > > > > > > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > > ub.com%2FNuvoton-Israel%2Figps%2Ftree%2Fmaster%2FImageGeneration%2Fver > > > sions&data=04%7C01%7Cofer.eilon%40nuvoton.com%7Ce56881b8491d42e5ee > > > 4c08d8d71bacd4%7Ca3f24931d4034b4a94f17d83ac638e07%7C0%7C0%7C6374958611 > > > 62860437%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL > > > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=0%2BNzEv%2FSX9QTg0Xumch > > > RrU61uGbZ3CZXrtspXu2560I%3D&reserved=0 > > > > > > Has issues too. It doesn't allow me to read more than 4k bytes once at > > > a time. Thus, to flash the stuff I have manually read chunks from the > > > SD-card: fat load doesn't work at all and I write that data in raw > > > partition. > > > > > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > > > > > Hi Benjamin and Anton, > > > > > > > > Sorry for the late reply, > > > > > > > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why it is different than the OpenBMC flash layout. > > > > > > > > > > > > > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to modify the flash partition to OpenBMC use. > > > > > > > > > > > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> wrote: > > > >> > > > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: > > > >> > > > > >> > From: "Anton D. Kachalov" <gmouse@google.com> > > > >> > > > > >> > This change satisfy OpenBMC requirements for flash layout. > > > >> > > > > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > > > >> > --- > > > >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 > > > >> > +++++++---------------- > > > >> > 1 file changed, 8 insertions(+), 20 deletions(-) > > > >> > > > > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > > >> > b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > > >> > index bd1eb6ee380f..741c1fee8552 100644 > > > >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > > >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > > > >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { > > > >> > reg = <0x0080000 0x80000>; > > > >> > read-only; > > > >> > }; > > > >> > - envparam@100000 { > > > >> > - label = "env-param"; > > > >> > + ubootenv@100000 { > > > >> > + label = "u-boot-env"; > > > >> > reg = <0x0100000 0x40000>; > > > >> > read-only; > > > >> > }; @@ -195,25 +195,13 @@ > > > >> > kernel@200000 { > > > >> > label = "kernel"; > > > >> > reg = <0x0200000 0x400000>; > > > >> > }; > > > >> > - rootfs@600000 { > > > >> > - label = "rootfs"; > > > >> > - reg = <0x0600000 0x700000>; > > > >> > + rofs@780000 { > > > >> > + label = "rofs"; > > > >> > + reg = <0x0780000 0x1680000>; > > > >> > }; > > > >> > - spare1@D00000 { > > > >> > - label = "spare1"; > > > >> > - reg = <0x0D00000 0x200000>; > > > >> > - }; > > > >> > - spare2@0F00000 { > > > >> > - label = "spare2"; > > > >> > - reg = <0x0F00000 0x200000>; > > > >> > - }; > > > >> > - spare3@1100000 { > > > >> > - label = "spare3"; > > > >> > - reg = <0x1100000 0x200000>; > > > >> > - }; > > > >> > - spare4@1300000 { > > > >> > - label = "spare4"; > > > >> > - reg = <0x1300000 0x0>; > > > >> > + rwfs@1e00000 { > > > >> > + label = "rwfs"; > > > >> > + reg = <0x1e00000 0x200000>; > > > >> > }; > > > >> > > > >> I recommend just including the openbmc-flash-layout.dtsi file here > > > >> instead since that contains the common flash layout for most > > > >> OpenBMC systems. > > > >> > > > > Good solution, > > > > Do you mean nuvoton-openbmc-flash-layout? > > > >> > > > >> > }; > > > >> > }; > > > >> > -- > > > >> > 2.30.0.478.g8a0d178c01-goog > > > >> > > > > > > > > > > > > > Thanks, > > > > > > > > Tomer > > > > > > > > -- > > Regards, > > Avi > > ________________________________ > > ________________________________ > > The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton. -- Regards, Avi [-- Attachment #2: npcmx50_sdhci.c --] [-- Type: application/octet-stream, Size: 3705 bytes --] /* *copyright (c) 2017 Nuvoton Technology Corp. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <dm.h> #include <sdhci.h> #include <clk.h> #include <asm/arch/cpu.h> #include <asm/arch/gcr.h> #include <asm/arch/clock.h> #define NPCMX50_SD 0 #define NPCMX50_EMMC 1 #ifdef CONFIG_DM_MMC struct npcmx50_sdhci_plat { struct mmc_config cfg; struct mmc mmc; }; DECLARE_GLOBAL_DATA_PTR; #endif #ifdef CONFIG_DM_MMC static int npcmx50_sdhci_probe(struct udevice *dev) { struct npcmx50_sdhci_plat *plat = dev_get_platdata(dev); struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct sdhci_host *host = dev_get_priv(dev); int ret; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; if (host->index == NPCMX50_SD) { unsigned int status; sdhci_writeb(host, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST, SDHCI_HOST_CONTROL); status = sdhci_readl(host, SDHCI_PRESENT_STATE); while ((!(status & SDHCI_CARD_PRESENT)) || (!(status & SDHCI_CARD_STATE_STABLE)) || (!(status & SDHCI_CARD_DETECT_PIN_LEVEL))) status = sdhci_readl(host, SDHCI_PRESENT_STATE); } host->version = sdhci_readw(host, SDHCI_HOST_VERSION); if (host->bus_width == 4) host->host_caps |= MMC_MODE_4BIT; if (host->bus_width == 8) host->host_caps |= MMC_MODE_8BIT; ret = sdhci_setup_cfg(&plat->cfg, host, host->clock, 400000); if (ret) return ret; host->mmc = &plat->mmc; host->mmc->priv = host; host->mmc->dev = dev; upriv->mmc = host->mmc; host->clock = 0; return sdhci_probe(dev); } static int npcmx50_ofdata_to_platdata(struct udevice *dev) { struct sdhci_host *host = dev_get_priv(dev); host->name = strdup(dev->name); host->ioaddr = (void *)dev_read_addr(dev); host->bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "bus-width", 4); host->index = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "index", 0); host->clock = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "clock-frequency", 400000); if (host->ioaddr == (void *)FDT_ADDR_T_NONE) return -EINVAL; return 0; } static int npcmx50_sdhci_bind(struct udevice *dev) { struct npcmx50_sdhci_plat *plat = dev_get_platdata(dev); return sdhci_bind(dev, &plat->mmc, &plat->cfg); } static int npcmx50_sdhci_remove(struct udevice *dev) { return 0; } static const struct udevice_id npcmx50_mmc_ids[] = { { .compatible = "nuvoton,npcmx50-sdhci-SD" }, { .compatible = "nuvoton,npcmx50-sdhci-eMMC"}, { } }; U_BOOT_DRIVER(npcmx50_sdc_drv) = { .name = "npcmx50_sdhci", .id = UCLASS_MMC, .of_match = npcmx50_mmc_ids, .ofdata_to_platdata = npcmx50_ofdata_to_platdata, .ops = &sdhci_ops, .bind = npcmx50_sdhci_bind, .probe = npcmx50_sdhci_probe, .remove = npcmx50_sdhci_remove, .priv_auto_alloc_size = sizeof(struct sdhci_host), .platdata_auto_alloc_size = sizeof(struct npcmx50_sdhci_plat), }; #endif ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-21 16:53 ` Tomer Maimon 2021-02-22 9:26 ` Anton Kachalov @ 2021-02-26 20:10 ` Anton Kachalov 2021-03-01 13:36 ` Tomer Maimon 1 sibling, 1 reply; 22+ messages in thread From: Anton Kachalov @ 2021-02-26 20:10 UTC (permalink / raw) To: Tomer Maimon Cc: devicetree, Benjamin Fair, Avi Fishman, Patrick Venture, OpenBMC Maillist, Linux Kernel Mailing List, Tali Perry, Rob Herring [-- Attachment #1: Type: text/plain, Size: 3979 bytes --] Hello, Tomer. Seems like Nuvoton's u-boot expects the uboot-env at different address comparing to openbmc-flash-layout.dtsi: https://github.com/Nuvoton-Israel/u-boot/blob/npcm7xx-v2019.01/include/configs/poleg.h#L30 Vs. https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/openbmc-flash-layout.dtsi#n13 The change is more about making partitions naming the same as expected by OpenBMC. On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > Hi Benjamin and Anton, > > Sorry for the late reply, > > The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why > it is different than the OpenBMC flash layout. > > > > Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to > modify the flash partition to OpenBMC use. > > On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> > wrote: > >> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: >> > >> > From: "Anton D. Kachalov" <gmouse@google.com> >> > >> > This change satisfy OpenBMC requirements for flash layout. >> > >> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> >> > --- >> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- >> > 1 file changed, 8 insertions(+), 20 deletions(-) >> > >> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > index bd1eb6ee380f..741c1fee8552 100644 >> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> > @@ -182,8 +182,8 @@ bbuboot2@80000 { >> > reg = <0x0080000 0x80000>; >> > read-only; >> > }; >> > - envparam@100000 { >> > - label = "env-param"; >> > + ubootenv@100000 { >> > + label = "u-boot-env"; >> > reg = <0x0100000 0x40000>; >> > read-only; >> > }; >> > @@ -195,25 +195,13 @@ kernel@200000 { >> > label = "kernel"; >> > reg = <0x0200000 0x400000>; >> > }; >> > - rootfs@600000 { >> > - label = "rootfs"; >> > - reg = <0x0600000 0x700000>; >> > + rofs@780000 { >> > + label = "rofs"; >> > + reg = <0x0780000 0x1680000>; >> > }; >> > - spare1@D00000 { >> > - label = "spare1"; >> > - reg = <0x0D00000 0x200000>; >> > - }; >> > - spare2@0F00000 { >> > - label = "spare2"; >> > - reg = <0x0F00000 0x200000>; >> > - }; >> > - spare3@1100000 { >> > - label = "spare3"; >> > - reg = <0x1100000 0x200000>; >> > - }; >> > - spare4@1300000 { >> > - label = "spare4"; >> > - reg = <0x1300000 0x0>; >> > + rwfs@1e00000 { >> > + label = "rwfs"; >> > + reg = <0x1e00000 0x200000>; >> > }; >> >> I recommend just including the openbmc-flash-layout.dtsi file here >> instead since that contains the common flash layout for most OpenBMC >> systems. >> >> Good solution, > Do you mean nuvoton-openbmc-flash-layout? > >> > }; >> > }; >> > -- >> > 2.30.0.478.g8a0d178c01-goog >> > >> > > Thanks, > > Tomer > [-- Attachment #2: Type: text/html, Size: 6841 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-26 20:10 ` Anton Kachalov @ 2021-03-01 13:36 ` Tomer Maimon 0 siblings, 0 replies; 22+ messages in thread From: Tomer Maimon @ 2021-03-01 13:36 UTC (permalink / raw) To: Anton Kachalov Cc: devicetree, Benjamin Fair, Avi Fishman, Patrick Venture, OpenBMC Maillist, Linux Kernel Mailing List, Tali Perry, Rob Herring [-- Attachment #1: Type: text/plain, Size: 4600 bytes --] Hi Anton, The reason the u-boot Env is at 0x100000 address is that some costumers have: one copy of Bootblock and U-boot at 0x0 - 0x80000 second copy of Bootblock and U-boot at 0x80000 - 0x100000. we have two options; 1. Modify the OpenBMC device tree flash layout u-boot Env address to 0x100000. 2. Add a patch to OpnBMC platform that using openbmc flash layout to modify CONFIG_ENV_OFFSET in the u-boot. Thanks, Tomer On Fri, 26 Feb 2021 at 22:10, Anton Kachalov <gmouse@google.com> wrote: > Hello, Tomer. > > Seems like Nuvoton's u-boot expects the uboot-env at different address > comparing to openbmc-flash-layout.dtsi: > > > https://github.com/Nuvoton-Israel/u-boot/blob/npcm7xx-v2019.01/include/configs/poleg.h#L30 > > Vs. > > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/openbmc-flash-layout.dtsi#n13 > > The change is more about making partitions naming the same as expected by > OpenBMC. > > On Sun, 21 Feb 2021 at 17:40, Tomer Maimon <tmaimon77@gmail.com> wrote: > >> Hi Benjamin and Anton, >> >> Sorry for the late reply, >> >> The EVB FIU0-CS0 partitioning is used for testing the EVB and this is why >> it is different than the OpenBMC flash layout. >> >> >> >> Are you using the NPCM7XX EVB for OpenBMC? if yes we can consider to >> modify the flash partition to OpenBMC use. >> >> On Thu, 18 Feb 2021 at 19:11, Benjamin Fair <benjaminfair@google.com> >> wrote: >> >>> On Thu, 18 Feb 2021 at 04:42, <gmouse@google.com> wrote: >>> > >>> > From: "Anton D. Kachalov" <gmouse@google.com> >>> > >>> > This change satisfy OpenBMC requirements for flash layout. >>> > >>> > Signed-off-by: Anton D. Kachalov <gmouse@google.com> >>> > --- >>> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- >>> > 1 file changed, 8 insertions(+), 20 deletions(-) >>> > >>> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >>> b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >>> > index bd1eb6ee380f..741c1fee8552 100644 >>> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >>> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >>> > @@ -182,8 +182,8 @@ bbuboot2@80000 { >>> > reg = <0x0080000 0x80000>; >>> > read-only; >>> > }; >>> > - envparam@100000 { >>> > - label = "env-param"; >>> > + ubootenv@100000 { >>> > + label = "u-boot-env"; >>> > reg = <0x0100000 0x40000>; >>> > read-only; >>> > }; >>> > @@ -195,25 +195,13 @@ kernel@200000 { >>> > label = "kernel"; >>> > reg = <0x0200000 0x400000>; >>> > }; >>> > - rootfs@600000 { >>> > - label = "rootfs"; >>> > - reg = <0x0600000 0x700000>; >>> > + rofs@780000 { >>> > + label = "rofs"; >>> > + reg = <0x0780000 0x1680000>; >>> > }; >>> > - spare1@D00000 { >>> > - label = "spare1"; >>> > - reg = <0x0D00000 0x200000>; >>> > - }; >>> > - spare2@0F00000 { >>> > - label = "spare2"; >>> > - reg = <0x0F00000 0x200000>; >>> > - }; >>> > - spare3@1100000 { >>> > - label = "spare3"; >>> > - reg = <0x1100000 0x200000>; >>> > - }; >>> > - spare4@1300000 { >>> > - label = "spare4"; >>> > - reg = <0x1300000 0x0>; >>> > + rwfs@1e00000 { >>> > + label = "rwfs"; >>> > + reg = <0x1e00000 0x200000>; >>> > }; >>> >>> I recommend just including the openbmc-flash-layout.dtsi file here >>> instead since that contains the common flash layout for most OpenBMC >>> systems. >>> >>> Good solution, >> Do you mean nuvoton-openbmc-flash-layout? >> >>> > }; >>> > }; >>> > -- >>> > 2.30.0.478.g8a0d178c01-goog >>> > >>> >> >> Thanks, >> >> Tomer >> > [-- Attachment #2: Type: text/html, Size: 8751 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: dts: nuvoton: Fix flash layout @ 2021-02-07 17:58 Anton Kachalov 2021-02-07 22:28 ` Anton Kachalov 2021-02-08 12:50 ` Anton Kachalov 0 siblings, 2 replies; 22+ messages in thread From: Anton Kachalov @ 2021-02-07 17:58 UTC (permalink / raw) To: OpenBMC Maillist [-- Attachment #1: Type: text/plain, Size: 1323 bytes --] This change satisfies OpenBMC requirements for flash layout. Signed-off-by: Anton D. Kachalov <gmouse@google.com> --- arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- 1 file changed, 8 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index bd1eb6ee380f..741c1fee8552 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -182,8 +182,8 @@ bbuboot2@80000 { reg = <0x0080000 0x80000>; read-only; }; - envparam@100000 { - label = "env-param"; + ubootenv@100000 { + label = "u-boot-env"; reg = <0x0100000 0x40000>; read-only; }; @@ -195,25 +195,13 @@ kernel@200000 { label = "kernel"; reg = <0x0200000 0x400000>; }; - rootfs@600000 { - label = "rootfs"; - reg = <0x0600000 0x700000>; + rofs@780000 { + label = "rofs"; + reg = <0x0780000 0x1680000>; }; - spare1@D00000 { - label = "spare1"; - reg = <0x0D00000 0x200000>; - }; - spare2@0F00000 { - label = "spare2"; - reg = <0x0F00000 0x200000>; - }; - spare3@1100000 { - label = "spare3"; - reg = <0x1100000 0x200000>; - }; - spare4@1300000 { - label = "spare4"; - reg = <0x1300000 0x0>; + rwfs@1e00000 { + label = "rwfs"; + reg = <0x1e00000 0x200000>; }; }; }; -- 2.30.0.478.g8a0d178c01-goog [-- Attachment #2: Type: text/html, Size: 1872 bytes --] ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-07 17:58 Anton Kachalov @ 2021-02-07 22:28 ` Anton Kachalov 2021-02-09 0:08 ` Joel Stanley 2021-02-08 12:50 ` Anton Kachalov 1 sibling, 1 reply; 22+ messages in thread From: Anton Kachalov @ 2021-02-07 22:28 UTC (permalink / raw) To: OpenBMC Maillist [-- Attachment #1: Type: text/plain, Size: 1586 bytes --] Patch has tab symbols. Have no idea how to submit it in 2021 by email :) On Sun, 7 Feb 2021 at 18:58, Anton Kachalov <rnouse@google.com> wrote: > This change satisfies OpenBMC requirements for flash layout. > > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > --- > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- > 1 file changed, 8 insertions(+), 20 deletions(-) > > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > index bd1eb6ee380f..741c1fee8552 100644 > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > @@ -182,8 +182,8 @@ bbuboot2@80000 { > reg = <0x0080000 0x80000>; > read-only; > }; > - envparam@100000 { > - label = "env-param"; > + ubootenv@100000 { > + label = "u-boot-env"; > reg = <0x0100000 0x40000>; > read-only; > }; > @@ -195,25 +195,13 @@ kernel@200000 { > label = "kernel"; > reg = <0x0200000 0x400000>; > }; > - rootfs@600000 { > - label = "rootfs"; > - reg = <0x0600000 0x700000>; > + rofs@780000 { > + label = "rofs"; > + reg = <0x0780000 0x1680000>; > }; > - spare1@D00000 { > - label = "spare1"; > - reg = <0x0D00000 0x200000>; > - }; > - spare2@0F00000 { > - label = "spare2"; > - reg = <0x0F00000 0x200000>; > - }; > - spare3@1100000 { > - label = "spare3"; > - reg = <0x1100000 0x200000>; > - }; > - spare4@1300000 { > - label = "spare4"; > - reg = <0x1300000 0x0>; > + rwfs@1e00000 { > + label = "rwfs"; > + reg = <0x1e00000 0x200000>; > }; > }; > }; > -- > 2.30.0.478.g8a0d178c01-goog > > > [-- Attachment #2: Type: text/html, Size: 2311 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-07 22:28 ` Anton Kachalov @ 2021-02-09 0:08 ` Joel Stanley 0 siblings, 0 replies; 22+ messages in thread From: Joel Stanley @ 2021-02-09 0:08 UTC (permalink / raw) To: Anton Kachalov; +Cc: OpenBMC Maillist On Sun, 7 Feb 2021 at 22:28, Anton Kachalov <rnouse@google.com> wrote: > > Patch has tab symbols. Have no idea how to submit it in 2021 by email :) :D I recommend git-send-email. Speak to your google colleagues about how to set up mail delivery with your corp account. Cheers, Joel > > On Sun, 7 Feb 2021 at 18:58, Anton Kachalov <rnouse@google.com> wrote: >> >> This change satisfies OpenBMC requirements for flash layout. >> >> Signed-off-by: Anton D. Kachalov <gmouse@google.com> >> --- >> arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- >> 1 file changed, 8 insertions(+), 20 deletions(-) >> >> diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> index bd1eb6ee380f..741c1fee8552 100644 >> --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts >> @@ -182,8 +182,8 @@ bbuboot2@80000 { >> reg = <0x0080000 0x80000>; >> read-only; >> }; >> - envparam@100000 { >> - label = "env-param"; >> + ubootenv@100000 { >> + label = "u-boot-env"; >> reg = <0x0100000 0x40000>; >> read-only; >> }; >> @@ -195,25 +195,13 @@ kernel@200000 { >> label = "kernel"; >> reg = <0x0200000 0x400000>; >> }; >> - rootfs@600000 { >> - label = "rootfs"; >> - reg = <0x0600000 0x700000>; >> + rofs@780000 { >> + label = "rofs"; >> + reg = <0x0780000 0x1680000>; >> }; >> - spare1@D00000 { >> - label = "spare1"; >> - reg = <0x0D00000 0x200000>; >> - }; >> - spare2@0F00000 { >> - label = "spare2"; >> - reg = <0x0F00000 0x200000>; >> - }; >> - spare3@1100000 { >> - label = "spare3"; >> - reg = <0x1100000 0x200000>; >> - }; >> - spare4@1300000 { >> - label = "spare4"; >> - reg = <0x1300000 0x0>; >> + rwfs@1e00000 { >> + label = "rwfs"; >> + reg = <0x1e00000 0x200000>; >> }; >> }; >> }; >> -- >> 2.30.0.478.g8a0d178c01-goog >> >> ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout 2021-02-07 17:58 Anton Kachalov 2021-02-07 22:28 ` Anton Kachalov @ 2021-02-08 12:50 ` Anton Kachalov 1 sibling, 0 replies; 22+ messages in thread From: Anton Kachalov @ 2021-02-08 12:50 UTC (permalink / raw) To: OpenBMC Maillist Here is base64 encoded patch: === CUT === RnJvbSAwMTBhYTg5ODI2ZjUxZjNjMTc2MTY1YjU5YWJmZTcyYmFhZmYxYzhkIE1vbiBTZXAgMTcg MDA6MDA6MDAgMjAwMQpGcm9tOiAiQW50b24gRC4gS2FjaGFsb3YiIDxnbW91c2VAZ29vZ2xlLmNv bT4KRGF0ZTogU3VuLCA3IEZlYiAyMDIxIDE4OjUxOjQ4ICswMTAwClN1YmplY3Q6IFtQQVRDSF0g QVJNOiBkdHM6IG51dm90b246IEZpeCBmbGFzaCBsYXlvdXQKIFRoaXMgY2hhbmdlIHNhdGlzZnkg T3BlbkJNQyByZXF1aXJlbWVudHMgZm9yIGZsYXNoIGxheW91dC4KClNpZ25lZC1vZmYtYnk6IEFu dG9uIEQuIEthY2hhbG92IDxnbW91c2VAZ29vZ2xlLmNvbT4KLS0tCiBhcmNoL2FybS9ib290L2R0 cy9udXZvdG9uLW5wY203NTAtZXZiLmR0cyB8IDI4ICsrKysrKystLS0tLS0tLS0tLS0tLS0tCiAx IGZpbGUgY2hhbmdlZCwgOCBpbnNlcnRpb25zKCspLCAyMCBkZWxldGlvbnMoLSkKCmRpZmYgLS1n aXQgYS9hcmNoL2FybS9ib290L2R0cy9udXZvdG9uLW5wY203NTAtZXZiLmR0cyBiL2FyY2gvYXJt L2Jvb3QvZHRzL251dm90b24tbnBjbTc1MC1ldmIuZHRzCmluZGV4IGJkMWViNmVlMzgwZi4uNzQx YzFmZWU4NTUyIDEwMDY0NAotLS0gYS9hcmNoL2FybS9ib290L2R0cy9udXZvdG9uLW5wY203NTAt ZXZiLmR0cworKysgYi9hcmNoL2FybS9ib290L2R0cy9udXZvdG9uLW5wY203NTAtZXZiLmR0cwpA QCAtMTgyLDggKzE4Miw4IEBAIGJidWJvb3QyQDgwMDAwIHsKIAkJCQlyZWcgPSA8MHgwMDgwMDAw IDB4ODAwMDA+OwogCQkJCXJlYWQtb25seTsKIAkJCQl9OwotCQkJZW52cGFyYW1AMTAwMDAwIHsK LQkJCQlsYWJlbCA9ICJlbnYtcGFyYW0iOworCQkJdWJvb3RlbnZAMTAwMDAwIHsKKwkJCQlsYWJl bCA9ICJ1LWJvb3QtZW52IjsKIAkJCQlyZWcgPSA8MHgwMTAwMDAwIDB4NDAwMDA+OwogCQkJCXJl YWQtb25seTsKIAkJCQl9OwpAQCAtMTk1LDI1ICsxOTUsMTMgQEAga2VybmVsQDIwMDAwMCB7CiAJ CQkJbGFiZWwgPSAia2VybmVsIjsKIAkJCQlyZWcgPSA8MHgwMjAwMDAwIDB4NDAwMDAwPjsKIAkJ CQl9OwotCQkJcm9vdGZzQDYwMDAwMCB7Ci0JCQkJbGFiZWwgPSAicm9vdGZzIjsKLQkJCQlyZWcg PSA8MHgwNjAwMDAwIDB4NzAwMDAwPjsKKwkJCXJvZnNANzgwMDAwIHsKKwkJCQlsYWJlbCA9ICJy b2ZzIjsKKwkJCQlyZWcgPSA8MHgwNzgwMDAwIDB4MTY4MDAwMD47CiAJCQkJfTsKLQkJCXNwYXJl MUBEMDAwMDAgewotCQkJCWxhYmVsID0gInNwYXJlMSI7Ci0JCQkJcmVnID0gPDB4MEQwMDAwMCAw eDIwMDAwMD47Ci0JCQkJfTsKLQkJCXNwYXJlMkAwRjAwMDAwIHsKLQkJCQlsYWJlbCA9ICJzcGFy ZTIiOwotCQkJCXJlZyA9IDwweDBGMDAwMDAgMHgyMDAwMDA+OwotCQkJCX07Ci0JCQlzcGFyZTNA MTEwMDAwMCB7Ci0JCQkJbGFiZWwgPSAic3BhcmUzIjsKLQkJCQlyZWcgPSA8MHgxMTAwMDAwIDB4 MjAwMDAwPjsKLQkJCQl9OwotCQkJc3BhcmU0QDEzMDAwMDAgewotCQkJCWxhYmVsID0gInNwYXJl NCI7Ci0JCQkJcmVnID0gPDB4MTMwMDAwMCAweDA+OworCQkJcndmc0AxZTAwMDAwIHsKKwkJCQls YWJlbCA9ICJyd2ZzIjsKKwkJCQlyZWcgPSA8MHgxZTAwMDAwIDB4MjAwMDAwPjsKIAkJCX07CiAJ CX07CiAJfTsKLS0gCjIuMzAuMC40NzguZzhhMGQxNzhjMDEtZ29vZwoK === /CUT === On Sun, 7 Feb 2021 at 18:58, Anton Kachalov <rnouse@google.com> wrote: > > This change satisfies OpenBMC requirements for flash layout. > > Signed-off-by: Anton D. Kachalov <gmouse@google.com> > --- > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++---------------- > 1 file changed, 8 insertions(+), 20 deletions(-) > > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > index bd1eb6ee380f..741c1fee8552 100644 > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > @@ -182,8 +182,8 @@ bbuboot2@80000 { > reg = <0x0080000 0x80000>; > read-only; > }; > - envparam@100000 { > - label = "env-param"; > + ubootenv@100000 { > + label = "u-boot-env"; > reg = <0x0100000 0x40000>; > read-only; > }; > @@ -195,25 +195,13 @@ kernel@200000 { > label = "kernel"; > reg = <0x0200000 0x400000>; > }; > - rootfs@600000 { > - label = "rootfs"; > - reg = <0x0600000 0x700000>; > + rofs@780000 { > + label = "rofs"; > + reg = <0x0780000 0x1680000>; > }; > - spare1@D00000 { > - label = "spare1"; > - reg = <0x0D00000 0x200000>; > - }; > - spare2@0F00000 { > - label = "spare2"; > - reg = <0x0F00000 0x200000>; > - }; > - spare3@1100000 { > - label = "spare3"; > - reg = <0x1100000 0x200000>; > - }; > - spare4@1300000 { > - label = "spare4"; > - reg = <0x1300000 0x0>; > + rwfs@1e00000 { > + label = "rwfs"; > + reg = <0x1e00000 0x200000>; > }; > }; > }; > -- > 2.30.0.478.g8a0d178c01-goog > > ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2021-03-01 13:24 UTC | newest] Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-02-18 12:25 [PATCH] ARM: dts: nuvoton: Fix flash layout gmouse 2021-02-18 12:25 ` gmouse 2021-02-18 12:47 ` Paul Menzel 2021-02-18 17:10 ` Benjamin Fair 2021-02-18 17:10 ` Benjamin Fair 2021-02-21 16:53 ` Tomer Maimon 2021-02-22 9:26 ` Anton Kachalov 2021-02-22 9:26 ` Anton Kachalov 2021-02-22 10:21 ` Avi Fishman 2021-02-22 10:21 ` Avi Fishman 2021-02-22 14:10 ` IS20 Ofer Eilon 2021-02-22 14:10 ` IS20 Ofer Eilon 2021-02-22 14:24 ` Anton Kachalov 2021-02-22 14:24 ` Anton Kachalov 2021-02-23 13:14 ` Avi Fishman 2021-02-23 13:14 ` Avi Fishman 2021-02-26 20:10 ` Anton Kachalov 2021-03-01 13:36 ` Tomer Maimon -- strict thread matches above, loose matches on Subject: below -- 2021-02-07 17:58 Anton Kachalov 2021-02-07 22:28 ` Anton Kachalov 2021-02-09 0:08 ` Joel Stanley 2021-02-08 12:50 ` Anton Kachalov
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.