Re: [PATCH v9 3/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 01/03/2023 19:37, Dmitry Rokosov wrote:
> Add the documentation for Amlogic A1 PLL clock driver, and A1 PLL
> clock controller bindings.
> Also include new A1 clock controller dt bindings to MAINTAINERS.
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
> ---
>  .../bindings/clock/amlogic,a1-pll-clkc.yaml   | 59 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  include/dt-bindings/clock/a1-pll-clkc.h       | 20 +++++++
>  3 files changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>  create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
> new file mode 100644
> index 000000000000..8bd2c948df86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson A/C serials PLL Clock Control Unit
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong@linaro.org>
> +  - Jerome Brunet <jbrunet@baylibre.com>
> +  - Jian Hu <jian.hu@jian.hu.com>
> +  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
> +
> +properties:
> +  compatible:
> +    const: amlogic,a1-pll-clkc
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: input fixpll_in
> +      - description: input hifipll_in
> +
> +  clock-names:
> +    items:
> +      - const: fixpll_in
> +      - const: hifipll_in
> +
> +required:
> +  - compatible
> +  - '#clock-cells'
> +  - reg
> +  - clocks
> +  - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/a1-clkc.h>

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

> +    apb {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        clock-controller@7c80 {
> +            compatible = "amlogic,a1-pll-clkc";
> +            reg = <0 0x7c80 0 0x18c>;
> +            #clock-cells = <1>;
> +            clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
> +                     <&clkc_periphs CLKID_HIFIPLL_IN>;
> +            clock-names = "fixpll_in", "hifipll_in";
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 39ff1a717625..8438bc9bd636 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1895,6 +1895,7 @@ L:	linux-amlogic@lists.infradead.org
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/clock/amlogic*
>  F:	drivers/clk/meson/
> +F:	include/dt-bindings/clock/a1*
>  F:	include/dt-bindings/clock/gxbb*
>  F:	include/dt-bindings/clock/meson*
>  
> diff --git a/include/dt-bindings/clock/a1-pll-clkc.h b/include/dt-bindings/clock/a1-pll-clkc.h

Filename matching bindings, so amlogic,a1-pll-clkc.h

> new file mode 100644
> index 000000000000..3a559518c6e6
> --- /dev/null
> +++ b/include/dt-bindings/clock/a1-pll-clkc.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */

Any particular reason for using license other than in binding? Was it
intentional (e.g. because it is derivative work)?

> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + * Author: Jian Hu <jian.hu@amlogic.com>
> + *
> + * Copyright (c) 2023, SberDevices. All Rights Reserved.
> + * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>


Best regards,
Krzysztof