* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 16:23 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 16:23 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 18:23 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 17:59
----------------------------------------------------------------------
Then the ICH4 does require the channel swapping? Grr, I hate this.
Try copy ICH.conf to ICH4.conf and replace the string "ICH" with "ICH4" in
the new config file. This should work without "Swap Surround"...
----------------------------------------------------------------------
willits - 06-24-05 18:23
----------------------------------------------------------------------
I have done that, and this work without "swap surround"...
But I haven't all my speaker works when I am playing an audio or Video
file (with 2 channels)
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
06-24-05 17:27 willits Note Added: 0005241
06-24-05 17:28 willits File Added: ICH4.conf
06-24-05 17:28 willits File Added: ICH.conf
06-24-05 17:59 tiwai Note Added: 0005245
06-24-05 18:23 willits Note Added: 0005246
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-27 11:58 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-27 11:58 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-27-2005 13:58 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 18:41
----------------------------------------------------------------------
2.0 -> 5.1 isn't supported _on hardware_ with ALC650. Only 2.0 -> 4.0 is
supported. But, of course, you can do 2.0->5.1 on software, i.e. in
alsa-lib configuration. It's your homework :)
About 3D control: See my earlier comments.
----------------------------------------------------------------------
willits - 06-27-05 13:58
----------------------------------------------------------------------
I don't want 3D control (I have got 5.1 speaker that done this work).
I am searching in the alsa configuration, but I didn't really understand
the file alsa.conf, how I can get 2.0->5.1 by software ?
In the /usr/share/alsa/alsa.conf file, there are this :
defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.front.card defaults.pcm.card
defaults.pcm.front.device defaults.pcm.device
defaults.pcm.rear.card defaults.pcm.card
defaults.pcm.rear.device defaults.pcm.device
defaults.pcm.center_lfe.card defaults.pcm.card
defaults.pcm.center_lfe.device defaults.pcm.device
defaults.pcm.side.card defaults.pcm.card
defaults.pcm.side.device defaults.pcm.device
defaults.pcm.surround40.card defaults.pcm.card
defaults.pcm.surround40.device defaults.pcm.device
defaults.pcm.surround41.card defaults.pcm.card
defaults.pcm.surround41.device defaults.pcm.device
defaults.pcm.surround50.card defaults.pcm.card
defaults.pcm.surround50.device defaults.pcm.device
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
defaults.pcm.surround71.card defaults.pcm.card
defaults.pcm.surround71.device defaults.pcm.device
defaults.pcm.iec958.card defaults.pcm.card
defaults.pcm.iec958.device defaults.pcm.device
defaults.pcm.modem.card defaults.pcm.card
defaults.pcm.modem.device defaults.pcm.device
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0
--> In this, I have seen that :
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
But I didn't know how I can configure Alsa-lib for use this (surround51).
If you can help me
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
06-24-05 17:27 willits Note Added: 0005241
06-24-05 17:28 willits File Added: ICH4.conf
06-24-05 17:28 willits File Added: ICH.conf
06-24-05 17:59 tiwai Note Added: 0005245
06-24-05 18:23 willits Note Added: 0005246
06-24-05 18:25 willits Note Edited: 0005246
06-24-05 18:31 tiwai Note Added: 0005247
06-24-05 18:36 willits Note Added: 0005248
06-24-05 18:41 tiwai Note Added: 0005249
06-27-05 13:58 willits Note Added: 0005271
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 16:41 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 16:41 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 18:41 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-24-05 18:36
----------------------------------------------------------------------
Yes, but when I enable Duplicate front, I have got only front and rear
speaker who work, no LFE or center. (These speaker are on the black
connector)
But I want to know If I can enable this feature of my soundcard :
White-Side:/proc/asound/card0/codec97#0 # cat ac97#0-0
0-0/0: Realtek ALC650E
Capabilities :
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement --> I want to enable this
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off --> This is disabled
----------------------------------------------------------------------
tiwai - 06-24-05 18:41
----------------------------------------------------------------------
2.0 -> 5.1 isn't supported _on hardware_ with ALC650. Only 2.0 -> 4.0 is
supported. But, of course, you can do 2.0->5.1 on software, i.e. in
alsa-lib configuration. It's your homework :)
About 3D control: See my earlier comments.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
06-24-05 17:27 willits Note Added: 0005241
06-24-05 17:28 willits File Added: ICH4.conf
06-24-05 17:28 willits File Added: ICH.conf
06-24-05 17:59 tiwai Note Added: 0005245
06-24-05 18:23 willits Note Added: 0005246
06-24-05 18:25 willits Note Edited: 0005246
06-24-05 18:31 tiwai Note Added: 0005247
06-24-05 18:36 willits Note Added: 0005248
06-24-05 18:41 tiwai Note Added: 0005249
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 16:36 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 16:36 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 18:36 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 18:31
----------------------------------------------------------------------
Did you enable "Duplicate Front" switch?
----------------------------------------------------------------------
willits - 06-24-05 18:36
----------------------------------------------------------------------
Yes, but when I enable Duplicate front, I have got only front and rear
speaker who work, no LFE or center. (These speaker are on the black
connector)
But I want to know If I can enable this feature of my soundcard :
White-Side:/proc/asound/card0/codec97#0 # cat ac97#0-0
0-0/0: Realtek ALC650E
Capabilities :
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement --> I want to enable this
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off --> This is disabled
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
06-24-05 17:27 willits Note Added: 0005241
06-24-05 17:28 willits File Added: ICH4.conf
06-24-05 17:28 willits File Added: ICH.conf
06-24-05 17:59 tiwai Note Added: 0005245
06-24-05 18:23 willits Note Added: 0005246
06-24-05 18:25 willits Note Edited: 0005246
06-24-05 18:31 tiwai Note Added: 0005247
06-24-05 18:36 willits Note Added: 0005248
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 16:31 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 16:31 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 18:31 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-24-05 18:25
----------------------------------------------------------------------
I have done that, and this work without "swap surround"...
But I haven't got all my speaker works when I am playing an audio or Video
file (with 2 channels)
----------------------------------------------------------------------
tiwai - 06-24-05 18:31
----------------------------------------------------------------------
Did you enable "Duplicate Front" switch?
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
06-24-05 17:27 willits Note Added: 0005241
06-24-05 17:28 willits File Added: ICH4.conf
06-24-05 17:28 willits File Added: ICH.conf
06-24-05 17:59 tiwai Note Added: 0005245
06-24-05 18:23 willits Note Added: 0005246
06-24-05 18:25 willits Note Edited: 0005246
06-24-05 18:31 tiwai Note Added: 0005247
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 15:59 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 15:59 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 17:59 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-24-05 17:27
----------------------------------------------------------------------
I didn't really understand how I can see if there are the plugin "route".
I have attached these file : ICH.conf and ICH4.conf
-- > There are not "route" in the file ICH4.conf, but in ICH.conf file,
there are route.
----------------------------------------------------------------------
tiwai - 06-24-05 17:59
----------------------------------------------------------------------
Then the ICH4 does require the channel swapping? Grr, I hate this.
Try copy ICH.conf to ICH4.conf and replace the string "ICH" with "ICH4" in
the new config file. This should work without "Swap Surround"...
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
06-24-05 17:27 willits Note Added: 0005241
06-24-05 17:28 willits File Added: ICH4.conf
06-24-05 17:28 willits File Added: ICH.conf
06-24-05 17:59 tiwai Note Added: 0005245
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 15:27 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 15:27 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 17:27 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 16:24
----------------------------------------------------------------------
About 3D: You have 3D control switch, center and depth controls.
----------------------------------------------------------------------
willits - 06-24-05 17:27
----------------------------------------------------------------------
I didn't really understand how I can see if there are the plugin "route".
I have attached these file : ICH.conf and ICH4.conf
-- > There are not "route" in the file ICH4.conf, but in ICH.conf file,
there are route.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
06-24-05 17:27 willits Note Added: 0005241
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 14:24 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 14:24 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 16:24 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 16:15
----------------------------------------------------------------------
Then chekc whether /usr/share/alsa/cards/ICH4.conf includes "route" plugin.
Just grep route ICH4.conf. If it exists, the configuration is old. If
not, ... the problem is deeper.
----------------------------------------------------------------------
tiwai - 06-24-05 16:24
----------------------------------------------------------------------
About 3D: You have 3D control switch, center and depth controls.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
06-24-05 16:24 tiwai Note Added: 0005233
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 14:15 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 14:15 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 16:15 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-24-05 15:24
----------------------------------------------------------------------
$ cat /proc/asound/cards
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with ALC650E at 0xec001000, irq 5
White-Side:/proc/asound/card0/codec97#0 # cat ac97#0-0
0-0/0: Realtek ALC650E
Capabilities :
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Double rate slots: 10/11
Extended ID : codec=0 rev=1 LDAC SDAC CDAC DSA=0 SPDIF DRA VRA
Extended status : SPCV LDAC SDAC CDAC SPDIF=3/4 VRA
PCM front DAC : 48000Hz
PCM Surr DAC : 48000Hz
PCM LFE DAC : 48000Hz
PCM ADC : 22050Hz
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
SPDIF In Status : Not Locked
White-Side:/proc/asound/card0/codec97#0 # cat ac97#0-0+regs
0:00 = 5980
0:02 = 0505
0:04 = 0000
0:06 = 801f
0:08 = 0000
0:0a = 0000
0:0c = 801f
0:0e = 801f
0:10 = 9f1f
0:12 = 9e1e
0:14 = 9f1f
0:16 = 9f1f
0:18 = 1111
0:1a = 0000
0:1c = 0000
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 800f
0:28 = 05c7
0:2a = 05c1
0:2c = bb80
0:2e = bb80
0:30 = bb80
0:32 = 5622
0:34 = 0000
0:36 = 0700
0:38 = 0505
0:3a = 2824
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0808
0:66 = 0808
0:68 = 0000
0:6a = 4600
0:6c = 0000
0:6e = 0014
0:70 = 0211
0:72 = 00a0
0:74 = 0043
0:76 = 0001
0:78 = 8002
0:7a = 57c7
0:7c = 414c
0:7e = 4720
---
There are this : "3D enhancement : Realtek 3D Stereo Enhancement" in
capabilities, and this "3D enhancement : off" in Current setup, how I
can enable this feature ?
----------------------------------------------------------------------
tiwai - 06-24-05 16:15
----------------------------------------------------------------------
Then chekc whether /usr/share/alsa/cards/ICH4.conf includes "route" plugin.
Just grep route ICH4.conf. If it exists, the configuration is old. If
not, ... the problem is deeper.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
06-24-05 16:15 tiwai Note Added: 0005232
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 13:24 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 13:24 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 15:24 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 15:19
----------------------------------------------------------------------
It does, indeed. ICH4/5/6 are using "ICH4" driver type, and it uses
ICH4.conf while ICH/2/3 is "ICH" driver type with ICH.conf. The latter
swaps the channels of surround51 PCM via route plugin.
----------------------------------------------------------------------
willits - 06-24-05 15:24
----------------------------------------------------------------------
$ cat /proc/asound/cards
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with ALC650E at 0xec001000, irq 5
White-Side:/proc/asound/card0/codec97#0 # cat ac97#0-0
0-0/0: Realtek ALC650E
Capabilities :
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Double rate slots: 10/11
Extended ID : codec=0 rev=1 LDAC SDAC CDAC DSA=0 SPDIF DRA VRA
Extended status : SPCV LDAC SDAC CDAC SPDIF=3/4 VRA
PCM front DAC : 48000Hz
PCM Surr DAC : 48000Hz
PCM LFE DAC : 48000Hz
PCM ADC : 22050Hz
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
SPDIF In Status : Not Locked
White-Side:/proc/asound/card0/codec97#0 # cat ac97#0-0+regs
0:00 = 5980
0:02 = 0505
0:04 = 0000
0:06 = 801f
0:08 = 0000
0:0a = 0000
0:0c = 801f
0:0e = 801f
0:10 = 9f1f
0:12 = 9e1e
0:14 = 9f1f
0:16 = 9f1f
0:18 = 1111
0:1a = 0000
0:1c = 0000
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 800f
0:28 = 05c7
0:2a = 05c1
0:2c = bb80
0:2e = bb80
0:30 = bb80
0:32 = 5622
0:34 = 0000
0:36 = 0700
0:38 = 0505
0:3a = 2824
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0808
0:66 = 0808
0:68 = 0000
0:6a = 4600
0:6c = 0000
0:6e = 0014
0:70 = 0211
0:72 = 00a0
0:74 = 0043
0:76 = 0001
0:78 = 8002
0:7a = 57c7
0:7c = 414c
0:7e = 4720
---
There are this : "3D enhancement : Realtek 3D Stereo Enhancement" in
capabilities, and this "3D enhancement : off" in Current setup, how I
can enable this feature ?
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
06-24-05 15:24 willits Note Added: 0005228
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 13:19 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 13:19 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 15:19 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
jcdutton - 06-24-05 15:07
----------------------------------------------------------------------
Can't we add a quirk to the driver, so that it can detect the motherboard
type and set all the correct outputs as default.
----------------------------------------------------------------------
tiwai - 06-24-05 15:19
----------------------------------------------------------------------
It does, indeed. ICH4/5/6 are using "ICH4" driver type, and it uses
ICH4.conf while ICH/2/3 is "ICH" driver type with ICH.conf. The latter
swaps the channels of surround51 PCM via route plugin.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
06-24-05 15:19 tiwai Note Added: 0005227
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 13:07 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 13:07 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 15:07 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 14:54
----------------------------------------------------------------------
Swap Surround is not necessary with ICH4 but older ICH models seem
requiring the channel swapping.
Please show the content of /proc/asound/cards, and attach the files
/proc/asound/card0/codec97#0/* files for more checks.
Also, make sure that you installed alsa-lib-1.0.9.
The playback of 2ch samples with surrounds is enabled by "Duplicate Front"
switch, BTW. Or, it's possible via own asoundrc configuration, too.
----------------------------------------------------------------------
jcdutton - 06-24-05 15:07
----------------------------------------------------------------------
Can't we add a quirk to the driver, so that it can detect the motherboard
type and set all the correct outputs as default.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
06-24-05 15:07 jcdutton Note Added: 0005225
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 12:54 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 12:54 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 14:54 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-24-05 14:37
----------------------------------------------------------------------
I have tried, and now all speaker work !
But, when I am playing a media file (a mp3), I have got only front speaker
who work (Under windows, I have got all speaker).
----------------------------------------------------------------------
tiwai - 06-24-05 14:54
----------------------------------------------------------------------
Swap Surround is not necessary with ICH4 but older ICH models seem
requiring the channel swapping.
Please show the content of /proc/asound/cards, and attach the files
/proc/asound/card0/codec97#0/* files for more checks.
Also, make sure that you installed alsa-lib-1.0.9.
The playback of 2ch samples with surrounds is enabled by "Duplicate Front"
switch, BTW. Or, it's possible via own asoundrc configuration, too.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
06-24-05 14:54 tiwai Note Added: 0005221
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-24 12:37 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-24 12:37 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-24-2005 14:37 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
pzad - 06-23-05 22:42
----------------------------------------------------------------------
Try to play with "Swap Surround Slot" (the most left item in alsamixer).
----------------------------------------------------------------------
willits - 06-24-05 14:37
----------------------------------------------------------------------
I have tried, and now all speaker work !
But, when I am playing a media file (a mp3), I have got only front speaker
who work (Under windows, I have got all speaker).
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
06-24-05 14:37 willits Note Added: 0005220
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-23 20:42 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-23 20:42 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-23-2005 22:42 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-23-05 19:26
----------------------------------------------------------------------
Oups, forget the last post, (I had got line-in-as-surround enabled)
Now, good result :
0 - Front Left -> Work
4 - Center -> Rear left
1 - Front Right -> Work
3 - Rear Right -> Subwoofer
2 - Rear Left -> Center
5 - LFE -> Rear Right
----------------------------------------------------------------------
pzad - 06-23-05 22:42
----------------------------------------------------------------------
Try to play with "Swap Surround Slot" (the most left item in alsamixer).
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
06-23-05 22:42 pzad Note Added: 0005196
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-23 17:26 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-23 17:26 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-23-2005 19:26 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-23-05 19:21
----------------------------------------------------------------------
I have done this command :
speaker-test -Dplug:surround51 -c6
And the result is really strange, (I have disabled duplicate front in
AlsaMixer and Line-in-as-Surround, and I have connected the subwoofer to
the "black connector")
I have got this result :
0 - Front Left -> Work
4 - Center -> Is the rear left
1 - Front Right -> Work
3 - Rear Right-> No sound
2 - Rear Left -> Is the center
5 - LFE -> Is the rear right
Very strange bug, I haven't got this bug under Windows. (So no connector
problem)
----------------------------------------------------------------------
willits - 06-23-05 19:26
----------------------------------------------------------------------
Oups, forget the last post, (I had got line-in-as-surround enabled)
Now, good result :
0 - Front Left -> Work
4 - Center -> Rear left
1 - Front Right -> Work
3 - Rear Right -> Subwoofer
2 - Rear Left -> Center
5 - LFE -> Rear Right
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
06-23-05 19:26 willits Note Added: 0005193
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-23 17:21 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-23 17:21 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-23-2005 19:21 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-23-05 12:01
----------------------------------------------------------------------
To be sure: how did you test the surround outputs?
For testing surround speakers, try speaker-test in alsa-utils at first.
----------------------------------------------------------------------
willits - 06-23-05 19:21
----------------------------------------------------------------------
I have done this command :
speaker-test -Dplug:surround51 -c6
And the result is really strange, (I have disabled duplicate front in
AlsaMixer and Line-in-as-Surround, and I have connected the subwoofer to
the "black connector")
I have got this result :
0 - Front Left -> Work
4 - Center -> Is the rear left
1 - Front Right -> Work
3 - Rear Right-> No sound
2 - Rear Left -> Is the center
5 - LFE -> Is the rear right
Very strange bug, I haven't got this bug under Windows. (So no connector
problem)
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
06-23-05 19:21 willits Note Added: 0005192
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-23 10:01 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-23 10:01 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-23-2005 12:01 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
pzad - 06-23-05 11:56
----------------------------------------------------------------------
I have via8233a + alc650d - and output using surround51 is OK for me with
alsa 1.0.9b.
----------------------------------------------------------------------
tiwai - 06-23-05 12:01
----------------------------------------------------------------------
To be sure: how did you test the surround outputs?
For testing surround speakers, try speaker-test in alsa-utils at first.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
06-23-05 12:01 tiwai Note Added: 0005174
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-23 9:56 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-23 9:56 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-23-2005 11:56 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
jcdutton - 06-23-05 11:23
----------------------------------------------------------------------
I have the ALC650 chip, and the output is also wrong for me.
I will investigate why when I get a moment and then fix the driver.
----------------------------------------------------------------------
pzad - 06-23-05 11:56
----------------------------------------------------------------------
I have via8233a + alc650d - and output using surround51 is OK for me with
alsa 1.0.9b.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
06-23-05 11:56 pzad Note Added: 0005172
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-23 9:23 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-23 9:23 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-23-2005 11:23 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-23-05 11:23
----------------------------------------------------------------------
With alsa 1.0.9, alsamixer say : "AlsaMixer v1.0.9a" and I have got the
same AlsaMixer than before.
----------------------------------------------------------------------
jcdutton - 06-23-05 11:23
----------------------------------------------------------------------
I have the ALC650 chip, and the output is also wrong for me.
I will investigate why when I get a moment and then fix the driver.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
06-23-05 11:23 jcdutton Note Added: 0005170
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-23 9:23 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-23 9:23 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-23-2005 11:23 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-23-05 11:17
----------------------------------------------------------------------
(I haven't got a perfect english), the "black jack" is one of 5 audio
connector of the soundcard, on this connector, I put the subwoofer and the
central speaker.
I have find that under Suse, packages alsa-firmware and alsa-tool are in
1.0.8 version, but the package are in 1.0.9. I have upgraded it to 1.0.9.
I try with these new driver.
----------------------------------------------------------------------
willits - 06-23-05 11:23
----------------------------------------------------------------------
With alsa 1.0.9, alsamixer say : "AlsaMixer v1.0.9a" and I have got the
same AlsaMixer than before.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
06-23-05 11:23 willits Note Added: 0005169
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-23 9:17 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-23 9:17 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-23-2005 11:17 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-22-05 18:12
----------------------------------------------------------------------
Hmm, then this sounds like a long-standing bug of ALC650 support code.
Interestingly, this seems to get fixed on some ALC650 revisions, but you
seem to have no luck yet.
What I don't understand is "black jack" in your description. How many
jacks does the device have and how are they supposed to work?
BTW, with ALSA 1.0.9, there is no longer "Line-In As Surround" and "Mic As
Center/LFE" switches. If you still see these switches in alsamixer, it
means that you're using an older verison.
These controls are merged to "Channel Mode" enum control and "Surround
Jack Mode" on 1.0.9. For 6-channel output, choose "6ch" in the former
control. Usually it's chosen automatically when you use "surround51" PCM
output.
The latter determines whether to use shared jacks or independet jacks. If
you have independent surround output jacks, choose "Independent" there.
----------------------------------------------------------------------
willits - 06-23-05 11:17
----------------------------------------------------------------------
(I haven't got a perfect english), the "black jack" is one of 5 audio
connector of the soundcard, on this connector, I put the subwoofer and the
central speaker.
I have find that under Suse, packages alsa-firmware and alsa-tool are in
1.0.8 version, but the package are in 1.0.9. I have upgraded it to 1.0.9.
I try with these new driver.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
06-23-05 11:17 willits Note Added: 0005168
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-22 16:12 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-22 16:12 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-22-2005 18:12 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-17-05 20:34
----------------------------------------------------------------------
I use the intel8x0 driver.
----------------------------------------------------------------------
tiwai - 06-22-05 18:12
----------------------------------------------------------------------
Hmm, then this sounds like a long-standing bug of ALC650 support code.
Interestingly, this seems to get fixed on some ALC650 revisions, but you
seem to have no luck yet.
What I don't understand is "black jack" in your description. How many
jacks does the device have and how are they supposed to work?
BTW, with ALSA 1.0.9, there is no longer "Line-In As Surround" and "Mic As
Center/LFE" switches. If you still see these switches in alsamixer, it
means that you're using an older verison.
These controls are merged to "Channel Mode" enum control and "Surround
Jack Mode" on 1.0.9. For 6-channel output, choose "6ch" in the former
control. Usually it's chosen automatically when you use "surround51" PCM
output.
The latter determines whether to use shared jacks or independet jacks. If
you have independent surround output jacks, choose "Independent" there.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
06-22-05 18:12 tiwai Note Added: 0005139
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-17 18:34 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-17 18:34 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-17-2005 20:34 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-17-05 20:32
----------------------------------------------------------------------
I have got Alsa 1.0.9 (distributed by Suse), I can try with 1.0.9b but I
didn't think that this correct the problem (I have got this bug since my
first linux (Mandrake 9 and Alsa 0.9))
----------------------------------------------------------------------
willits - 06-17-05 20:34
----------------------------------------------------------------------
I use the intel8x0 driver.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
06-17-05 20:34 willits Note Added: 0005080
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-17 18:32 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-17 18:32 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-17-2005 20:32 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-17-05 15:10
----------------------------------------------------------------------
Why don't use ALSA drivers 1.0.9b? The drivers on 2.6.11.x kernel are old.
(And note that the surround-related controls were changed on 1.0.9.
Please attach /etc/asound.state again after update.)
----------------------------------------------------------------------
willits - 06-17-05 20:32
----------------------------------------------------------------------
I have got Alsa 1.0.9 (distributed by Suse), I can try with 1.0.9b but I
didn't think that this correct the problem (I have got this bug since my
first linux (Mandrake 9 and Alsa 0.9))
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
06-17-05 20:32 willits Note Added: 0005079
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-17 13:10 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-17 13:10 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-17-2005 15:10 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-16-05 16:10
----------------------------------------------------------------------
I have done alsactl -f test.state store command and I have attached the
file.
----------------------------------------------------------------------
tiwai - 06-17-05 15:10
----------------------------------------------------------------------
Why don't use ALSA drivers 1.0.9b? The drivers on 2.6.11.x kernel are old.
(And note that the surround-related controls were changed on 1.0.9.
Please attach /etc/asound.state again after update.)
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
06-16-05 16:11 willits File Added: test.state
06-17-05 15:10 tiwai Note Added: 0005075
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-16 14:10 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-16 14:10 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-16-2005 16:10 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
pzad - 06-16-05 15:43
----------------------------------------------------------------------
Do
alsactl -f test.state store
and attach test.state file
----------------------------------------------------------------------
willits - 06-16-05 16:10
----------------------------------------------------------------------
I have done alsactl -f test.state store command and I have attached the
file.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
06-16-05 16:10 willits Note Added: 0005062
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-16 13:43 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-16 13:43 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-16-2005 15:43 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-16-05 15:25
----------------------------------------------------------------------
He was already mutted, and no subwoofer.
----------------------------------------------------------------------
pzad - 06-16-05 15:43
----------------------------------------------------------------------
Do
alsactl -f test.state store
and attach test.state file
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
06-16-05 15:43 pzad Note Added: 0005060
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-16 13:25 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-16 13:25 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-16-2005 15:25 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
pzad - 06-16-05 15:21
----------------------------------------------------------------------
Try mute "Mic in as Center/LFE" too.
----------------------------------------------------------------------
willits - 06-16-05 15:25
----------------------------------------------------------------------
He was already mutted, and no subwoofer.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
06-16-05 15:25 willits Note Added: 0005059
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-16 13:22 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-16 13:22 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-16-2005 15:21 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
willits - 06-16-05 15:19
----------------------------------------------------------------------
I have mute "Line In as Surround", I have put the subwoofer connector to
the black connector, and he doesn't work.
----------------------------------------------------------------------
pzad - 06-16-05 15:21
----------------------------------------------------------------------
Try mute "Mic in as Center/LFE" too.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
06-16-05 15:21 pzad Note Added: 0005058
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-16 13:19 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-16 13:19 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-16-2005 15:19 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
pzad - 06-16-05 15:13
----------------------------------------------------------------------
Try run alsamixer
find item with name "Line In as Surround" - mute it (with M key)
----------------------------------------------------------------------
willits - 06-16-05 15:19
----------------------------------------------------------------------
I have mute "Line In as Surround", I have put the subwoofer connector to
the black connector, and he doesn't work.
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
06-16-05 15:19 willits Note Added: 0005057
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-16 13:13 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-16 13:13 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-16-2005 15:13 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
pzad - 06-16-05 15:13
----------------------------------------------------------------------
Try run alsamixer
find item with name "Line In as Surround" - mute it (with M key)
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
06-16-05 15:13 pzad Note Added: 0005056
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
* [ALSA - driver 0001197]: Realtek ALC650 output problem
@ 2005-06-16 13:07 bugtrack
0 siblings, 0 replies; 33+ messages in thread
From: bugtrack @ 2005-06-16 13:07 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1197
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.11
======================================================================
Date Submitted: 06-16-2005 15:07 CEST
Last Modified: 06-16-2005 15:07 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7.
The problem is that I have got 5.1 speakers, and for have my subwoofer and
central speaker work, I need to put them on the "line in" connector
instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue
06-16-05 15:07 willits Kernel Version => 2.6.11
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2005-06-27 11:58 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-06-24 16:23 [ALSA - driver 0001197]: Realtek ALC650 output problem bugtrack
-- strict thread matches above, loose matches on Subject: below --
2005-06-27 11:58 bugtrack
2005-06-24 16:41 bugtrack
2005-06-24 16:36 bugtrack
2005-06-24 16:31 bugtrack
2005-06-24 15:59 bugtrack
2005-06-24 15:27 bugtrack
2005-06-24 14:24 bugtrack
2005-06-24 14:15 bugtrack
2005-06-24 13:24 bugtrack
2005-06-24 13:19 bugtrack
2005-06-24 13:07 bugtrack
2005-06-24 12:54 bugtrack
2005-06-24 12:37 bugtrack
2005-06-23 20:42 bugtrack
2005-06-23 17:26 bugtrack
2005-06-23 17:21 bugtrack
2005-06-23 10:01 bugtrack
2005-06-23 9:56 bugtrack
2005-06-23 9:23 bugtrack
2005-06-23 9:23 bugtrack
2005-06-23 9:17 bugtrack
2005-06-22 16:12 bugtrack
2005-06-17 18:34 bugtrack
2005-06-17 18:32 bugtrack
2005-06-17 13:10 bugtrack
2005-06-16 14:10 bugtrack
2005-06-16 13:43 bugtrack
2005-06-16 13:25 bugtrack
2005-06-16 13:22 bugtrack
2005-06-16 13:19 bugtrack
2005-06-16 13:13 bugtrack
2005-06-16 13:07 bugtrack
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.